Compositions and sorptive properties of crop residue-derived chars

Ni(II), Cr(VI), Cu(II) and nitrate removal by the co-system of Pseudomonas hibiscicola strain L1 immobilized on peanut shell biochar

At present, the improvement of nitrate and mixed heavy metals removal in wastewater by microorganism are urgently needed. Previous studies have shown that Pseudomonas hibiscicola strain L1 exhibited Ni(II) removal ability under aerobic denitrification. In this study, the characteristics of the free strain L1, peanut shell biochar (PBC) and further the co-system of strain L1 immobilized on PBC were investigated for the removal of Ni(II), Cr(VI), Cu(II) and nitrate in mix-wastewater. The results illustrated that strain L1 could remove 15.51% - 32.55% of Ni(II) (20-100 mg·L^-1), and removal ratios by co-system were ranked as Ni(II) (81.17%) > Cu(II) (45.84%) > Cr(VI) (38.21%). Scanning Electron Microscope (SEM), X-ray Diffractometer (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) images indicated that the strain L1 immobilized well on PBC and had vigorous biological activity; the crystals of Ni(OH)₂, Cu(OH)₂ and CrO(OH) etc. were formed on surface of co-system with various functional groups participated in. In Sequential Batch Reactor (SBR), the pollutant removal ratios by co-system were higher than that by free strain L1. This study illustrated that the co-system of strain L1 immobilized on PBC was qualified to be applied for practical scenarios of effective heavy metal removal of electroplating mix-wastewater.

Preventative effect of crop straw-derived biochar on plant growth in an arsenic polluted acidic ultisol

In different regions of the world, arsenic (As) contaminated soils poses a serious threat to plant growth and its physiological processes. Organic amendments are a cost-effective and environmentally friendly way to improve plant growth under stress conditions in contaminated soils. In As polluted acidic ultisol, a greenhouse trial was conducted to investigate the protective effects of peanut straw biochar (PSB) and canola straw biochar (CSB) on soybean mineral nutrition, antioxidant enzymes, and physiological growth parameters. The current study used eighteen treatments with different levels of As ((1) 0 mg kg^-1, (2) 30 mg kg^-1, (3) 60 mg kg^-1) and biochar (PSB and CSB) (0%, 1%, and 2%). The result suggests that biochar addition under As stress in highly weathered acidic ultisol soil increased soybean growth attributes and defense mechanisms. The PSB was more effective than the CSB in a dose-dependent manner. The application of 2% PSB in polluted soil resulted in significant increases in soybean height (58%), biomass production (root (44%) and shoot length (52%)), chlorophyll contents (92%), soybean functional leaves (62%), total soluble sugars (TSS) (71%) and base cations (Ca²⁺, Mg²⁺, K⁺, Na⁺). However, biochar application decreased proline, MDA, H₂O₂, and O₂^- by 64%, 82%, 49%, and 45% respectively. Furthermore, biochar application increased (Phosphate) P and As uptake in soybean, with PSB application exhibiting a greater increase than CSB application. As a result, crop straw-derived biochar can reduce As-induced soybean plant damage and insert a protective effect in As-contaminated acidic ultisol soils.

Enhanced microbial reduction of aqueous hexavalent chromium by Shewanella oneidensis MR-1 with biochar as electron shuttle

Biochar, carbonaceous material produced from biomass pyrolysis, has been demonstrated to have electron transfer property (associated with redox active groups and multi condensed aromatic moiety), and to be also involved in biogeochemical redox reactions. In this study, the enhanced removal of Cr(VI) by Shewanella oneidensis MR-1(MR-1) in the presence of biochars with different pyrolysis temperatures (300 to 800 °C) was investigated to understand how biochar interacts with Cr(VI) reducing bacteria under anaerobic condition. The promotion effects of biochar (as high as 1.07~1.47 fold) were discovered in this process, of which the synergistic effect of BMBC700(ball milled biochar) and BMBC800 with MR-1 was noticeable, in contrast, the synergistic effect of BMBCs (300-600 °C) with MR-1 was not recognized. The more enhanced removal effect was observed with the increase of BMBC dosage for BMBC700+MR-1 group. The conductivity and conjugated O-containing functional groups of BMBC700 particles themselves has been proposed to become a dominant factor for the synergistic action with this strain. And, the smallest negative Zeta potential of BMBC700 and BMBC800 is thought to favor decreasing the distance from microbe than other BMBCs. The results are expected to provide some technical considerations and scientific insight for the optimization of bioreduction by useful microbes combining with biochar composites to be newly developed.

Influence of pyrolysis temperature on characteristics and Cr(VI) adsorption performance of carbonaceous nanofibers derived from bacterial cellulose

The effects of pyrolysis temperature on properties and adsorption performance of carbonized bacterial cellulose (CBC) produced from bacterial cellulose at 300, 400, 600 and 800 °C were investigated. As pyrolysis temperature increased, the BET surface area, C and ash contents of CBC increased while its mass yield and the contents of H, N and O decreased. Higher pyrolysis temperature resulted in CBC having more aromatic structure and less hydrophilic. The impacts of pyrolysis temperature, solution pH, contact time and initial concentration on the absorption of Cr(VI) onto CBC were systematically studied as well. The results showed that CBC400 prepared at 400 °C exhibited the highest Cr(VI) adsorption capacity for Cr(VI) up to 250.0 mg/g. The equilibrium adsorption and adsorption kinetics fitted the Langmuir isotherm and pseudo-second-order kinetic models well. The mechanisms of adsorption of Cr(VI) on CBC included electrostatic interaction, π-π interaction and functional groups complexation.

Characteristics and chlorine reactivity of biochar-derived dissolved organic matter: Effects of feedstock type and pyrolysis temperature

Increasing biochar application worldwide may release more biochar-derived dissolved organic matter (BDOM) to the source water for drinking water supply. However, it is unclear how feedstock types and pyrolysis temperatures for biochar production would affect the characteristics and chlorine reactivity of BDOM. Here, we studied the spectroscopic characteristics of BDOM pyrolyzed from pine needle, wheat straw, walnut shells, alfalfa, pig manure, and sludge derived biochars at 300, 500, and 700 °C, as well as the formation potential of disinfection byproducts (DBPs) and their bulk toxicity after BDOM chlorination. The N/C ratio of biochar was higher for N-rich than C-rich feedstocks. Optical analyses indicated that BDOM aromaticity was highest at 700 °C, while the impact of pyrolysis temperature on the molecular weight of BDOM varied greatly among feedstocks. Increasing pyrolysis temperature caused consistently decreased BDOM reactivity toward haloketone formation but did not show consistent impacts on the other DBPs. Among feedstocks, the N-rich sludge showed the highest specific haloacetonitrile formation potential of BDOM at any given pyrolysis temperature. The DBP formation potential from biochar was consistently highest at 300 °C and was higher for N-rich than C-rich feedstocks. The microtoxicity of DBP mixture was highest for the BDOM derived from sludge produced at 300 °C. This study highlights the high variations in characteristics and chlorination reactivity of BDOM with varying feedstocks and pyrolysis temperatures, which implies that more attention should be paid to the environmental impacts of the intensive application of low-temperature biochar from N-rich feedstock such as sludge.

Strontium Ion Removal From Artificial Seawater Using a Combination of Adsorption With Biochar and Precipitation by Blowing CO2 Nanobubble With Neutralization

While enjoying the convenience of nuclear energy development, the environmental contamination by radionuclide leakage is of significant concern. Because of its cost-effectiveness and environmental friendliness, biochar has attracted a lot of attention in the field of radioactive water treatment. Herein, a novel teak peel modified biochar (labeled as PMBN3) was prepared and applied to remove strontium from artificial seawater. The characterisation of the prepared PMBN3 showed it contains numerous oxygen-containing functional groups (i.e. carboxyl and hydroxyl groups), laminar morphology, mesoporous structure, large specific surface area. PMBN3 exhibited great advantages in Sr(II) adsorption, such as rapid adsorption kinetics (<1 h for equilibrium) and superior reusability. The adsorption of strontium by biochar is consistent with pseudo-second order and internal diffusion kinetic models. Among the four types of adsorption isotherms, the Freundlich isotherm showed the best fit with R₂ > 0.98. The calculated thermodynamic parameters indicate that strontium adsorption on biochar occurs exothermically and spontaneously. Furthermore, for efficient removal of Sr(II), CO₂ nanobubbles were blown into artificial seawater to precipitate the interfering metal ions, and followed by the adsorption of PMBN3 towards residual metal ions with the removal rate of Sr(II) over 99.7%. Finally, mechanistic studies have shown that the strontium adsorption process by PMBN3 is a multiple adsorption mechanism consisting of ion exchange between H⁺ (from -OH and -COOH) and Sr(II), and weak intermolecular forces between Sr(II) and the PMBN3 adsorbent. This study creatively combines chemisorption and nanobubble precipitation for strontium removal, which provides great reference value and guidance for environmental remediation.

Characterization of halophyte biochar and its effects on water and salt contents in saline soil

Biochar is a beneficial soil amendment; however, biochar-based properties are mainly determined by the feedstocks and the pyrolysis temperature. Nevertheless, considering the vast biomass of halophyte, little is known about how the halophyte-derived biochar improves saline soils. In this study, we firstly produced biochars by using three different halophytes, including Tamarix chinensis (recretohalophyte), Suaeda salsa (euhalophyte), and Phragmites australis (pseudo-halophyte) at 300, 500, and 700 °C, and compared their chemical and physical properties. We applied halophyte (Tamarix chinensis and Phragmites australis) biochars (pyrolysis at 500 °C) into 0-20 cm saline soil at 2% and 4% (w/w) rates to investigate the saline soil water, salt, and pH dynamics in a 12-month column experiment. The results showed that as the pyrolytic temperature increase, biochar yield and pore diameter decreased by 37.5-44.0% and 34.6-89.7%, respectively; in contrast, biochar pH, specific surface area, and total volume increased by 24.8-47.8%, 3-37 times and 1-9 times, respectively. The halophyte types significantly controlled biochar carbon and dissolved salt content and electrical conductivity. Halophyte biochar application can increase soil water and salt content, and application of 4% of Tamarix chinensis-derived biochar can increase more soil moisture than the soil salinity, and it can maintain soil pH at a stable level, which would be a potential way to improve saline soil properties. The results are valuable for choosing halophyte types and optimizing pyrolytic temperatures for halophyte biochar production through specific environmental usage.

Banana stem and leaf biochar as an effective adsorbent for cadmium and lead in aqueous solution

Lead (Pb) and cadmium (Cd) are toxic heavy metals commonly found in aqueous environments. Biochar as a green adsorbent generated from biomass feedstock may be used for effective removal of these heavy metals. This study investigated the adsorption kinetics and isotherms of Pb²⁺ and Cd²⁺ in aqueous solutions at different pH by biochar prepared from banana stem and leaf (BSL-BC) at 400 °C. Characterizations using scanning electron microscope, X-ray diffraction, and Fourier-transform infrared spectroscopy showed that the synthesized BSL-BC had rough surface, porous structure, and oxygen-containing functional groups. The adsorption of Pb²⁺ and Cd²⁺ onto BSL-BC reached equilibrium in 8 h and 200 min, respectively, with faster adsorption attained at higher pH and the optimum pH occurred at 5 (Pb²⁺) and 8 (Cd²⁺). All adsorption kinetic data followed the pseudo-second-order rate model. The adsorption isotherm data of Pb²⁺ and Cd²⁺ could be well-described by the Langmuir and Freundlich models, respectively, whereas neither the Temkin or Dubinin-Radushkevich models provided satisfactory fitting results. The maximum adsorption capacities for Pb²⁺ and Cd²⁺ were 302.20 and 32.03 mg/g, respectively. The calculated mechanism contributions showed that complexation with oxygen-containing functional groups, ion exchange, mineral precipitation, and Pb²⁺/Cd²⁺-π coordination accounted for 0.1%, 8.4%, 88.8%, and 2.6% to Pb²⁺ adsorption, and 0.4%, 6.3%, 83.0%, and 10.4% to Cd²⁺ adsorption, respectively. Therefore, mineral precipitation was likely the major mechanism responsible for adsorption of both Pb²⁺ and Cd²⁺ by BSL-BC. The results suggest that the synthesized BSL-BC has great potential for adsorption of Pb²⁺ and Cd²⁺ from aqueous solutions.

The effect of black carbon on the chemical degradability of PCB1 via TENAX desorption technology from the perspective of adsorption states

Chemical degradation is one of the crucial methods for the remediation of hydrophobic organic compounds (HOCs) in soil/sediment. The sequestration effect of black carbon (BC) can affect the adsorption state of HOCs, thereby affecting their chemical degradability. Our study focused on the chemical degradability of 2-Chlorobiphenyl (PCB1) sequestrated on the typical BC (fly ash (FC), soot (SC), low-temperature biochar (BC400) and high-temperature biochar (BC900)) by iron-nickel bimetallic nanomaterials (nZVI/Ni) based on TENAX desorption technology. The results showed that PCB1 adsorbed in various states were simultaneously dechlorinated by nZVI/Ni. Specifically, rapid-desorption-state PCB1 tended to degrade more easily than resistant-desorption-state PCB1. Moreover, the degradation mechanism varied according to the type of BC. In the case of FC and SC, the degradation rate was lower than the desorption rate for the PCB1 in rapid and slow desorption states, and the degradation rate of PCB1 in the resistant desorption state was negligible. The PCB1 on FC and SC was first desorbed from BC and then degraded. However, in terms of BC400 and BC900, the degradation rate was higher than the desorption rate, and the degradation rate of the resistant-desorption-state PCB1 was 1.4 × 10^-2 h^-1 and 4.1 × 10^-2 h^-1, respectively. The graphitized structure of BC900 can directly transfer electrons, so more than 90% of the resistant-desorption-state PCB1 could be degraded. In addition, BC may affect the longevity of nZVI/Ni, thereby affecting its degradability. Therefore, the chemical degradability of BC-adsorbed HOCs should be comprehensively evaluated based on the adsorption state and the properties of BC.

Biochar for agronomy, animal farming, anaerobic digestion, composting, water treatment, soil remediation, construction, energy storage, and carbon sequestration: a review

In the context of climate change and the circular economy, biochar has recently found many applications in various sectors as a versatile and recycled material. Here, we review application of biochar-based for carbon sink, covering agronomy, animal farming, anaerobic digestion, composting, environmental remediation, construction, and energy storage. The ultimate storage reservoirs for biochar are soils, civil infrastructure, and landfills. Biochar-based fertilisers, which combine traditional fertilisers with biochar as a nutrient carrier, are promising in agronomy. The use of biochar as a feed additive for animals shows benefits in terms of animal growth, gut microbiota, reduced enteric methane production, egg yield, and endo-toxicant mitigation. Biochar enhances anaerobic digestion operations, primarily for biogas generation and upgrading, performance and sustainability, and the mitigation of inhibitory impurities. In composts, biochar controls the release of greenhouse gases and enhances microbial activity. Co-composted biochar improves soil properties and enhances crop productivity. Pristine and engineered biochar can also be employed for water and soil remediation to remove pollutants. In construction, biochar can be added to cement or asphalt, thus conferring structural and functional advantages. Incorporating biochar in biocomposites improves insulation, electromagnetic radiation protection and moisture control. Finally, synthesising biochar-based materials for energy storage applications requires additional functionalisation.

A review of biochar in anaerobic digestion to improve biogas production: Performances, mechanisms and economic assessments

Anaerobic digestion (AD) technology still faces some challenges including low methane productivity, instable operation efficiency and undesired refractory substances degradation. Biochar has recently been recognized as a promising alternative addition in AD process to enhance methane production. Based on VOSviewer analysis, this review presents a comprehensive summarizing of the applications, performances, and economies of biochar strategies in AD system. Firstly, typical production processes of biochar and its main characteristics including adsorption and immobilization ability, buffering ability and electron transfer ability were evaluated. Then, the applications of biochar in AD and its improving effects on biogas production/purification were summarized. Accordingly, the corresponding mechanisms of biochar addition in AD for digestion efficiency improvement were elucidated. Finally, the economic and environmental feasibilities of application biochar in AD, as well as prospective future studies were summarized. Through an overview of biochar in AD system, this paper aims to promote its widely practical applications.

Impacts of biochar-based fertilization on soil arbuscular mycorrhizal fungal community structure in a karst mountainous area

The application of biochar-based fertilizer can improve soil properties in part by stimulating microbial activity and growth. Karst ecosystems, which make up large areas of Southwest China, are prone to degradation. Understanding the response of arbuscular mycorrhizal fungal (AMF) community structure to biochar-based fertilizer application is of great significance to karst soil restoration. A field experiment was conducted in a typical karst soil (calcareous sandy loam) in Southwest China. A high-throughput sequencing approach was used to investigate the effect of biochar-based fertilization on AMF community structure in the karst soil. With the control (CK), compost with NPK fertilizer (MF), biochar (B), a lower amount of biochar with compost and NPK fertilizer (B1MF), biochar with compost and NPK fertilizer (BMF), and a higher amount of biochar with compost and NPK fertilizer (B4MF), the field trials were set up for 24 months. Soil amendments increased soil nutrient content and AMF diversity. The composition and structure of the AMF community varied among the treatments. AMF community composition was significantly impacted by soil chemical properties such as TC (total carbon), TN (total nitrogen), TP (total phosphorus), and AP (available phosphorus). Furthermore, network analysis showed that biochar-based fertilization increased the scale and complexity of the microbial co-occurrence network. Biochar-based fertilization enabled more keystone species (such as order Diversisporales and Glomerales) in the soil AMF network to participate in soil carbon resource management and soil nutrient cycling, indicating that biochar-based fertilizer is beneficial for the restoration of degraded karst soils.

Biochar-based fertilizer amendments improve the soil microbial community structure in a karst mountainous area

Biochar-based fertilizer amendment can improve soil properties partly due to stimulated microbial activities and growths. The karst ecosystem is prone to degradation and accounts for a large proportion of southwest China. Understanding of the response of the microbial community structure to biochar-based fertilizer application is of great significance in karst soil restoration. A field experiment located in southwest China was conducted in typical karst soil, and a high-throughput sequencing approach was used to investigate the effect of biochar-based fertilizer application on microbial community structure in karst soil. Field trials were set up for 24 months using the following treatments: control (CK), compost plus NPK fertilizer (MF), biochar (B), less biochar (half the quantity of biochar in B) plus compost and NPK fertilizer (B1MF), biochar plus compost and NPK fertilizer (BMF), and more biochar (double the quantity of biochar in B) plus compost and NPK fertilizer (B4MF). The results elucidated that BMF and B4MF treatments had higher contents of soil carbon and soil nutrients N, P, and K than the other treatments. Soil microbial abundance and diversity were significantly increased by biochar-based fertilizer amendments (BMF and B4MF), compared to CK (P < 0.05). BMF and B4MF treatments significantly increased the relative abundance of dominant microorganisms, compared to CK (P < 0.05). The difference in the composition of indicator microbes between each treated group indicated that soil amendments altered the microbial community structure. There was a strong correlation between soil properties (soil C-, N-, and P-fractions) and microbial community structure. Furthermore, network analysis revealed that the addition of biochar-based fertilizer increased the scale and complexity of the microbial co-occurrence network. To summarize, the application of biochar-based fertilizer enabled more keystone species in the soil microbial network to participate in soil carbon resource management and soil nutrient cycling, indicating that biochar-based fertilizer is beneficial for the restoration of karst-degraded soils.

Can the multi-walled carbon nanotubes be used to alleviate the phytotoxicity of herbicides in soils?

Herbicides are commonly used globally. However, residual herbicides in soils for ages often result in phytotoxicity and serious yield loss to subsequent crops. In this paper, the multi-walled carbon nanotubes (MWCNTs) were utilized to amend the herbicide polluted soil, and the adsorption performance of herbicides to MWCNTs amended soil was studied. Results indicate efficient alleviation of herbicide-induced phytotoxicity to rice and tobacco due to MWCNTs amendment. When 0.4% MWCNTs were applied, the concentration of sulfentrazone that inhibited the same rice height by 50% (IC₅₀) increased to more than 3 times that of pure soil. When the MWCNTs were used to alleviate the phytotoxicity of quinclorac to tobacco, the MWCNTs not only alleviated the phytotoxicity of quinclorac but also promoted the growth of tobacco. The MWCNTs amended soil significantly increased the adsorption of herbicide to soil than biochar. The soil microbial analysis shows that MWCNTs had no significant effect on soil microbial community diversity, but the long-term exposure to MWCNTs could change the structure of the soil microbial community. Above all, our results highlighted the potential implication of the MWCNTs to ensure crop production by promoting crop growth and reducing the residual bioavailability of herbicides.

Physicochemical Changes in Biomass Chars by Thermal Oxidation or Ambient Weathering and Their Impacts on Sorption of a Hydrophobic and a Cationic Compound

This study examined conditions that mimic oxidative processes of biomass chars during formation and weathering in the environment. A maple char prepared at the single heat treatment temperature of 500 °C for 2 h was exposed to different thermal oxidation conditions or accelerated oxidative aging conditions prior to sorption of naphthalene or the dication paraquat. Strong chemical oxidation (SCO) was included for comparison. Thermal oxidation caused micropore reaming, with ambient oxidation and SCO much less so. All oxidative treatments incorporated O, acidity, and cation exchange capacity (CEC). Thermal incorporation of O was a function of headspace O₂ concentration and reached a maximum at 350 °C due to the opposing process of burn-off. The CEC was linearly correlated with O/C, but the positive intercept together with nuclear magnetic resonance data signifies that, compared to O groups derived by anoxic pyrolysis, O acquired through oxidation by thermal or ambient routes contributes more to the CEC. Thermal oxidation increased the naphthalene sorption coefficient, the characteristic energy of sorption, and the uptake rate due to pore reaming. By contrast, ambient oxidation (and SCO) suppressed naphthalene sorption by creating a more hydrophilic surface. Paraquat sorption capacity was predicted by an equation that includes a CEC² term due to bidentate interaction with pairs of charges, predominating over monodentate interaction, plus a term for the capacity of naphthalene as a reference representing nonspecific driving forces.

One-pot pyrolysis of a typical invasive plant into nitrogen-doped biochars for efficient sorption of phthalate esters from aqueous solution

Invasive plants pose a significant threat to natural ecosystems because of their high adaptability, rapid propagation and spreading ability in the environment. In this study, a typical aquatic invasive plant, Pistia stratiotes, was chosen as a novel feedstock for the preparation of nitrogen-doped biochars (NBs) for the first time, and the NBs were used as efficient sorbents to remove phthalate esters (PAEs) from aqueous solution. Characterization results showed that NBs possess great pore structure (up to 126.72 m² g^-1), high nitrogen (2.02%-2.66%) and ash (24.7%-34.1%) content, abundant surface functional groups, hydrophobicity and a graphene structure. Batch sorption experiments were performed to investigate the sorption performance, processes and mechanisms. The capacities for PAEs sorption onto NBs were high, especially with NBs pyrolyzed at 700 °C, ranging up to 161.7 mg g^-1 for diethyl phthalate and 85.4 mg g^-1 for dibutyl phthalate; these levels were better than many reported for other sorbents. With kinetic and isotherm results, Pseudo-second order and Freundlich models fit the sorption data well, and chemical interactions involving hydrogen bonding, Lewis acid-base interaction, functional group interaction, cation-π interaction and π-π stacking interaction were identified as possible rate-limited steps. Moreover, Intra-particle diffusion and Dubinin-Radushkevich models indicated that multiple pore filling and partitioning dominated the process of PAEs sorption onto NBs. This study opens the door for new methods of pollution control with waste treatment, since invasive plant biomass resources were converted into advanced biochars for efficient environmental remediation.

Efficient peroxydisulfate activation with nZVI/CuO@BC nanocomposite derived from wastes for degradation of tetrabromobisphenol A in alkaline environment

Peroxydisulfate (PDS) is a promising oxidant for sulfate radical based advanced oxidation processes (SAOPs), however its efficient activation is still a challenge. In this study, biochar-supported nano-zerovalent iron (nZVI) and copper oxide (CuO) nanocomposite (nZVI/CuO@BC), derived from low-cost wastes including scrap iron filings, copper leaching solution and corn stalks, was successfully fabricated for PDS activation to enhance tetrabromobisphenol A (TBBPA) degradation in alkaline environment. Under the conditions of 100 mg/L nZVI/CuO@BC, 0.2 mM PDS, pH 8.0 and 25 °C, 86.32% of PDS was activated and 98.46% of TBBPA was degraded within 45 min in nZVI/CuO@BC-activated PDS system. When the PDS concentration was 2 mM, the nZVI/CuO@BC-activated PDS system realized efficient debromination and mineralization of TBBPA at the ratio of 79.12% and 79.36%, respectively. The results of EPR studies and radical scavenger experiments revealed that both hydroxyl radical (·OH) and sulfate radical (SO₄^·-) were responsible for TBBPA degradation. The nZVI could active PDS indirectly through electron transfer mechanism and exhibited synergistic effects with CuO on PDS activation. Furthermore, the nZVI/CuO@BC-activated PDS system showed good potential to degrade TBBPA in real water environment. Therefore, nZVI/CuO@BC could be a novel strategy for efficient PDS activation and TBBPA degradation in alkaline environment.

Sewage sludge and solid residues from biogas production derived biochar as an effective bio-waste adsorbent of fulvic acids from water or wastewater

Due to environmental concern, direct utilization of sewage sludge or residues from biogas production is restricted. Conversion of problematic bio-wastes into biochars can be a very effective solution. In the presented study, the adsorption of fulvic acids onto series of biochars produced from bio-wastes such as sewage sludge, residues from biogas production, and plant (Miscanthus sp.) were performed to examine the behavior of biochars in the environment and interactions with fulvic acids as the representatives of dissolved organic matter. The results clearly indicate that the highest excess of fulvic acids, 93-96 mg g^-1, was chemisorbed onto biochar obtained specifically from sewage sludge. The mechanism of the adsorption was independent from applied biochar feedstock. Monolayer coverage was dominant onto all biochars. Generally, adsorption was assumed to be controlled by polar interactions between fulvic acids and the biochars or pre-adsorbed and residual fulvic acids molecules (which were dominant) and the strong π-π interactions. The obtained high values of the adsorption capacity of sewage sludge derived biochars confirmed that thermal treatment is a very effective tool of bio-waste management.

Can biochar be an effective and reliable biostimulating agent for the remediation of hydrocarbon-contaminated soils?

Petroleum hydrocarbons represent one of the most common soil contaminants, whose presence poses a significant risk to soil biota and human health; for example, in Europe, hydrocarbon contamination accounts for more than 30% of contaminated sites. The use of biochar as a proposed alternative to the conventional remediation of soil contaminated with petroleum hydrocarbons has gained credence in recent times because of its cost-effectiveness and environmentally friendly nature. Biochar is a carbonaceous material produced by heating biomass in an oxygen-limited environment at high temperature. This review provides an overview of the application of biochar to remediate petroleum hydrocarbon-contaminated soils, with emphasis on the possibility of biochar functioning as a biostimulation agent. The properties of biochar were also examined. Furthermore, the mechanism, ecotoxicological impact and possible factors affecting biochar-based remediation are discussed. The review concludes by examining the drawbacks of biochar use in the remediation of hydrocarbon-contaminated soils and how to mitigate them. Biochar impacts soil microbes, which may result in the promotion of the degradation of petroleum hydrocarbons in the soil. Linear regression between bacterial population and degradation efficiency showed that R² was higher (0.50) and significant in treatment amended with biochar or both biochar and nutrient/fertiliser (p < 0.01), compared to treatment with nutrient/fertiliser only or no amendment (R² = 0.11). This suggest that one of the key impacts of biochar is enhancing microbial biomass and thus the biodegradation of petroleum hydrocarbons. Biochar represents a promising biostimulation agent for the remediation of hydrocarbon-contaminated soil. However, there remains key questions to be answered.

Waste-to-wealth application of wastewater treatment algae-derived hydrochar for Pb(II) adsorption

Hydrochar, as an energy-lean solid waste, is generated from an advanced biofuel conversion technique hydrothermal liquefaction (HTL) and always leads to environmental pollution without appropriate disposal. In this study, HTL-derived hydrochar is recycled and prepared as adsorbent used for Pb(Ⅱ) removal from wastewater. As the original porous structure of hydrochar is masked by oily volatiles remained after HTL, two types of oil-removal pretreatment (Soxhlet extraction and CO₂ activation) are explored. The result shows that CO₂ activation significantly enhances the adsorption capacity of Pb(Ⅱ), and the maximum adsorption capacity is 12.88 mg g⁻¹, as evaluated using Langmuir adsorption model. Further, apart from oily volatiles, most inorganic compounds derived from wastewater-grown algae is enriched in hydrochar, causing a smaller surface area of hydrochar. An ash-removal alkali treatment following CO₂ activation is introduced to dramatically increase the adsorption capacity to 25.00 mg g⁻¹ with an extremely low Pb(II) equilibrium concentration of 5.1×10^-4 mg L⁻¹, which is much lower than the maximum level of Pb concentration in drinking water (set by World Health Organization). This work introduces an approach to reuse HTL-hydrochar as an inexpensive adsorbent in Pb-contaminated water treatment, which not only provides another possible renewable adsorbent candidate applied in the field of lead adsorption, but also finds an alternative route to reduce solid waste effluent from HTL process.

Adsorption of arsenic (III) from aqueous solution by a novel phosphorus-modified biochar obtained from Taraxacum mongolicum Hand-Mazz: Adsorption behavior and mechanistic analysis

A novel phosphorus (P) modified biochar (PLBC) was produced by pyrolyzing biomass of the dietic herb Taraxacum mongolicum Hand-Mazz (TMHM) and treating it with monopotassium phosphate (KH₂PO₄). This phosphorous loaded biochar was then assessed as adsorbent for As(III) removal from contaminated water. In the current research, the adsorbent was characterized before and after P loading by means of SEM-EDX, TEM, FTIR and XRD techniques. It was evidenced that the presence of P on the surface of the biochar (BC) could improve its efficiency to remove As(III) from contaminated environments. Adsorption kinetics were evaluated by performing batch-type experiments at varied times and pH values (5, 7 and 9). The kinetic study revealed that a contact time of 24 h was required to attain equilibrium and the experimental data were best fitted to the pseudo-second-order kinetic model (q_e = 17.1 mg g^-1). In addition, several batch experiments were conducted with varied arsenic concentrations. During the adsorption tests, the maximum adsorption of As(III) was found at pH 5. The adsorption study further showed that compared to BC, PLBC depicted increased removal of As(III) from contaminated solutions. The adsorption experimental data showed the best fit to the Langmuir isotherm model (with R² = 0.84), with maximum As(III) adsorption capacity reaching 30.76 mg g^-1 for PLBC.

Hydrochar: A Review on Its Production Technologies and Applications

Recently, due to the escalating usage of non-renewable fossil fuels such as coal, natural gas and petroleum coke in electricity and power generation, and associated issues with pollution and global warming, more attention is being paid to finding alternative renewable fuel sources. Thermochemical and hydrothermal conversion processes have been used to produce biochar and hydrochar, respectively, from waste renewable biomass. Char produced from the thermochemical and hydrothermal decomposition of biomass is considered an environmentally friendly replacement for solid hydrocarbon materials such as coal and petroleum coke. Unlike thermochemically derived biochar, hydrochar has received little attention due to the lack of literature on its production technologies, physicochemical characterization, and applications. This review paper aims to fulfill these objectives and fill the knowledge gaps in the literature relating to hydrochar. Therefore, this review discusses the most recent studies on hydrochar characteristics, reaction mechanisms for char production technology such as hydrothermal carbonization, as well as hydrochar activation and functionalization. In addition, the applications of hydrochar, mainly in the fields of agriculture, pollutant adsorption, catalyst support, bioenergy, carbon sequestration, and electrochemistry are reviewed. With advancements in hydrothermal technologies and other environmentally friendly conversion technologies, hydrochar appears to be an appealing bioresource for a wide variety of energy, environmental, industrial, and commercial applications.

Sorption mechanism of naphthalene by diesel soot: Insight from displacement with phenanthrene/p-nitrophenol

The nonlinear sorption of hydrophobic organic contaminants (HOCs) could be changed to linear sorption by the suppression of coexisting solutes in natural system, resulting in the enhancement of mobility, bioavailability and risks of HOCs in the environment. In previous study, inspired from the competitive adsorption on activated carbon (AC), the displaceable fraction of HOCs sorption to soot by competitor was attributed to the adsorption on elemental carbon fraction of soot (EC-Soot), while the linear and nondisplaceable fraction was attributed to the partition in authigenic organic matter of soot (OM-Soot). In this study, however, we observed that the linear and nondisplaceable fraction of HOC (naphthalene) to a diesel soot (D-Soot) by competitor (phenanthrene or p-nitrophenol) should be attributed to not only the linear partition in OM-Soot, but also the residual linear adsorption on EC-Soot. We also observed that the competition on the surface of soot dominated by external surface was different from that of AC dominated by micropore surface, i.e., complete displacement of HOCs by p-nitrophenol could occur for the micropore surface of AC, but not for the external surface of soot. These observations were obtained through the separation of EC-Soot and OM-Soot from D-Soot with organic-solvent extraction and the sorption comparisons of D-Soot with an AC (ACF300) and a multiwalled carbon nanotube (MWCNT30). The obtained results would give new insights to the sorption mechanisms of HOCs by soot and help to assess their environmental risks.

The effects of biochars produced in different pyrolsis temperatures from agricultural wastes on cadmium uptake of tobacco plant

Abiotic stresses caused by cadmium (Cd) contamination in soil retard plant growth and decline the quality of food. Amendment of biochar was reported effective in reduction of mobility, plant uptake and toxicity of Cd in plants. The aim of this study was to investigate the effect of biochar applications produced from corn cob and rice husk at three different pyrolysis temperatures (400, 500 and 600 °C) on Cd uptake of tobacco plants. The results showed that the shoot Cd concentration and content of tobacco plants significantly increased with the application of Cd in increasing doses. The results showed that increasing Cd dosescaused significant increase (P < 0.01) in shoot Cd concentration and content of the tobacco plant at three different pyrolysis temperatures of both corn cob and rice husk biochars. The concentration of Cd was 0.48 mg kg⁻¹ in Cd0 dose of corn cob biochar produced at 500 °C and increased to 61.6 mg kg⁻¹ at Cd5, while Cd concentration increased to 72.3 mg kg⁻¹ with rice husk biochar. Despite the increase in Cd concentrations and content, shoot Cd concentrations and contents were significantly (P < 0.01) reduced with the treatments of corn cob and rice husk biochars produced at different pyrolysis temperatures. The Cd concentration at Cd5 dose in the absence of biochar addition was 90.5 mg kg⁻¹, while Cd concentration at Cd5 dose in 400, 500 and 600 °C treatments of corn cob biochar was reduced to 66.5, 61.6 and 67.3 mg kg⁻¹ respectively, and to 77.0, 72.3 and 70.2 mg kg⁻¹ in rice husk biochar. The results also revealed that corn cob biochar treatments were more effective in reducing Cd uptake of tobacco plants compared to rice husk biochar. Higher specific surface area of corncob biochar compared to rice husk biochar caused to the difference between two biochar sources on Cd uptake of tobacco plants.

Mechanisms of aromatic molecule - Oxygen-containing functional group interactions on carbonaceous material surfaces

Surface oxygen-containing functional groups (OFGs) at different sites of carbonaceous materials showed different effects on the normalized monolayer adsorption capacity (Q_BET/A) obtained from the modified BET model. The OFGs on mesoporous surfaces inhibited the adsorption via the water competition, whereas those on the external surface promoted the adsorption due to the enhanced hydrophobic driving force and electrostatic forces, as analyzed from the adsorption molar free energy. Multiple linear relationships were established between the monolayer adsorption capacity Q_BET/A and the amounts of OFGs on mesoporous and the external surfaces ([O]_meso and [O]_external, respectively). The properties of aromatic adsorbate compounds, the polar area radio of aromatic molecule to water (PA_ad/w), and the log K_ow together influenced the inhibition or promotion effects of OFGs. These results would allow predictions of adsorption behavior of aromatic compounds on carbonaceous materials on the basis of OFGs parameters. Theoretical calculations and simulations projected the configuration of aromatic molecules being parallel to the graphene sheets of carbonaceous materials. The symmetry-adapted perturbation theory (SAPT) energy decomposition showed that the electrostatic forces intensified with the increase of adsorbate polarity. These analyses revealed that the electrostatic forces were enhanced in the presence of OFGs and that the π-π EDA (electron donor-acceptor) was the main force.

Adsorption of Co(II) from aqueous solution using municipal sludge biochar modified by HNO3

Here adsorption studies were proposed on a carboxylated sludge biochar (CSB) material modified by HNO₃ to assess its capacity in the removal of cobalt from aqueous solution. The as-prepared sludge biochar material was characterized by Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), energy-dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The isotherm process could be well described by the Langmuir isotherm model. The adsorption kinetics indicated that cobalt adsorption followed a pseudo-second-order kinetics model. The mechanism between Co(II) and biochar involved electrostatic interaction, ion exchange, surface complexation and physical function. The adsorption capacity on CSB was as high as 72.27 mg·g^-1, surpassing original sludge biochar (SB) as CSB had abundant oxygen-containing functional groups and many hydroxyls, plus the BET surface areas increased when SB was modified by HNO₃, which stimulated adsorption effect. Therefore, this work shows that CSB could be used as an efficient adsorbent to remove Co(II) in wastewater.

Biodegradation of Indanthrene Blue RS dye in immobilized continuous upflow packed bed bioreactor using corncob biochar

The current study describes the aerobic biodegradation of Indanthrene Blue RS dye by a microbial consortium immobilized on corn-cob biochar in a continuous up-flow packed bed bioreactor. The adsorption experiments were performed without microbes to monitor the adsorption effects on initial dye decolorization efficiency. The batch experiments were carried out to estimate the process parameters, and the optimal values of pH, temperature, and inoculum volume were identified as 10.0, 30 °C, and 3.0 × 10⁶ CFU mL⁻¹, respectively. During the continuous operation, the effect of flow rate, initial substrate concentration, inlet loading rate of Indanthrene Blue RS on the elimination capacity, and its removal efficiency in the bioreactor was studied. The continuous up-flow packed bed bioreactor was performed at different flow rates (0.25 to 1.25 L h⁻¹) under the optimal parameters. The maximum removal efficiency of 90% was observed, with the loading rate varying between 100 and 300 mg L⁻¹ day⁻¹. The up-flow packed bed bioreactor used for this study was extremely useful in eliminating Indanthrene Blue RS dye using both the biosorption and biodegradation process. Therefore, it is a potential treatment strategy for detoxifying textile wastewater containing anthraquinone-based dyes.

High-efficiency removal capacities and quantitative adsorption mechanisms of Cd2+ by thermally modified biochars derived from different feedstocks

Adsorption characteristics of Cd²⁺ on the three biochars modified by pyrolysis and calcination were investigated that were derived from rice straw (TRSB), chicken manure (TCMB) and sewage sludge (TSSB). The pH effect, adsorption kinetics, isotherms and thermodynamics, and desorption were determined, and qualitative analysis of adsorption mechanisms was performed by SEM, XRD, FTIR and XPS. Maximum adsorption capacities reached 177.28, 96.03 and 74.04 mg/g for TCMB, TRSB and TSSB, respectively, which were higher than that of many previously reported biochars. Even after five adsorption-desorption cycles, TCMB showed the strongest reusability without losing significantly adsorption capacity. This suggested that thermally modified biochars, particularly TCMB, could be a preferred adsorbent for Cd²⁺. Relative distribution of adsorption mechanisms was examined by direct and indirect calculation, in which the precipitation and cation-exchange dominated the whole chemisorption process, jointly accounting for 84% (TRSB) to 95% (TCMB) of total adsorption. While the complexation was of minor importance in total adsorption accounting for 5%-16%. The relationship of each mechanism with the properties of biochar was also discussed. These provided new insights on the adsorption effectiveness and mechanisms for Cd²⁺ in the aqueous solution that was critical for evaluating the application of modified biochars.

Hydroxymethylfurfural as an Intermediate of Cellulose Carbonization

Hydrogen bond donor solvents such as aromatic solvents inhibit the secondary degradation of cellulose-derived primary pyrolysis products. In a previous study, we found that the formation of solid carbonized products was completely inhibited during cellulose pyrolysis in aromatic solvents, with 5-hydroxymethylfurfural (5-HMF) recovered in certain yields instead. This indicated that 5-HMF is an intermediate in cellulose carbonization. To confirm this hypothesis, the thermal reactivity of 5-HMF was investigated. At 280 °C, pure 5-HMF polymerized into a hard glassy substance through OH group elimination, but further conversion was slow. When pyrolyzed in the presence of glycerol, a model of coexisting primary pyrolysis products from cellulose, a coupling reaction proceeded. Reactions characteristic of cellulose carbonization then occurred, including the formation of acidic groups and benzene-type structures in the solid products. These results confirmed the above hypothesis. The molecular mechanism of cellulose carbonization is discussed, focusing on the crystalline nature.

Responses of phenanthrene degradation to the changes in bioavailability and microbial community structure in soils amended with biochars pyrolyzed at low and high temperatures

This study investigated the impact of wheat straw biochars pyrolyzed at temperatures of 100-700 ℃ (BC100-BC700) on biodegradation of phenanthrene in soils. During a 42-day experiment, biochar amendment reduced the biodegradation ratio of phenanthrene in soils by no change-77.0%. The biodegradation ratio decreased with the increase of pyrolysis temperature from 100 to 400 ℃ and then increased with the increase of pyrolysis temperature from 400 to 700 ℃, exhibiting a U-shape. Meanwhile, desorbing fraction of phenanthrene extracted by n-butanol declined with increasing pyrolysis temperature. Biochar-derived dissolved organic carbon (DOC) obviously influenced the soil DOC contents which were negatively correlated with the total relative abundances of dominant polycyclic aromatic hydrocarbon (PAH)-degraders. These results indicated that in soils amended with biochars pyrolyzed at low temperatures (i.e. 100-400 ℃), both the reduced bioavailability of phenanthrene and the reduced PAH-degrader abundance resulted in decreasing phenanthrene degradation with pyrolysis temperature. In soils amended with biochars pyrolyzed at high temperatures (i.e. 500-700 ℃; HT-biochars), two possible reasons contribute to increasing phenanthrene degradation with pyrolysis temperature: (1) high sorbed-phenanthrene concentration due to large specific surface area and high aromaticity of the biochars, and (2) the increased dominant PAH-degrader abundance for the removal of sorbed-phenanthrene due to the impact of HT-biochars on soil properties (mainly on DOC content).

Fungi and biochar applications in bioremediation of organic micropollutants from aquatic media

The conventional wastewater treatment system such as bacteria, is not able to remove recalcitrant micropollutants effectively. While, fungi have shown high capacity in degradation of recalcitrant compounds. Biochar, on the other hand, has gained attention in water and wastewater treatment as a low cost and sustainable adsorbent. This paper aims to review the recent applications of three major fungal divisions including Basidiomycota, Ascomycota, and Mucoromycotina, in organic micropollutants removal from wastewater. Moreover, it presents an insight into fungal bioreactors, fungal biofilm and immobilization system. Biochar adsorption capacities for organic micropollutants removal under different operating conditions are summarized. Finally, few recommendations for further research are established in the context of the combination of fungal biofilm with the technologies relying on the adsorption by porous carbonaceous materials.

Biochar and hydrochar derived from freshwater sludge: Characterization and possible applications

Freshwater sludge (FS) is generated in large quantities during the production of drinking water every day. It is largely underutilized, and has long been filter pressed to sludge cake and then disposed of in landfills. The search for more economical and sustainable disposal or reuse options is urgently needed. Biochar and hydrochar are increasingly popular wastes derived materials with huge potential for soil improvement, environmental remediation, and mitigation of climate change, but there is a lack of research on the production of FS derived biochar and hydrochar. In this study, biochar was produced by pyrolysis at 300, 500 or 700 °C for 1 h, and hydrochar was produced by hydrothermal carbonization (HTC) at 140, 160, 180 or 200 °C for 4 h. Proximate analyses show that the biochar has a higher carbon stability and is possibly suitable for carbon sequestration, while the hydrochar contains more labile carbon structures. The ultimate analysis indicates that the surface hydrophobicity is in the order of: biochar > hydrochar > FS. The phytotoxicity tests indicate their positive effects on germination of wheat seeds. This study provides a new treatment to reuse numerous FS and put forward the possible applications of its carbonaceous products, which is expected to facilitate a circular economy and realize the zero-waste target.

Recent Developments in Understanding Biochar’s Physical–Chemistry

Biochar is a porous material obtained by biomass thermal degradation in oxygen-starved conditions. It is nowadays applied in many fields. For instance, it is used to synthesize new materials for environmental remediation, catalysis, animal feeding, adsorbent for smells, etc. In the last decades, biochar has been applied also to soils due to its beneficial effects on soil structure, pH, soil organic carbon content, and stability, and, therefore, soil fertility. In addition, this carbonaceous material shows high chemical stability. Once applied to soil it maintains its nature for centuries. Consequently, it can be considered a sink to store atmospheric carbon dioxide in soils, thereby mitigating the effects of global climatic changes. The literature contains plenty of papers dealing with biochar’s environmental effects. However, a discrepancy exists between studies dealing with biochar applications and those dealing with the physical-chemistry behind biochar behavior. On the one hand, the impression is that most of the papers where biochar is tested in soils are based on trial-and-error procedures. Sometimes these give positive results, sometimes not. Consequently, it appears that the scientific world is divided into two factions: either supporters or detractors. On the other hand, studies dealing with biochar’s physical-chemistry do not appear helpful in settling the factions’ problem. This review paper aims at collecting all the information on physical-chemistry of biochar and to use it to explain biochar’s role in different fields of application.

Co-application of high temperature biochar with 3,4-dimethylpyrazole-phosphate treated ammonium sulphate improves nitrogen use efficiency in maize

This study aimed on the increasing nitrogen use efficiency (NUE) of maize via the use of high temperature produced biochar (700 °C). Maize was grown to maturity on two contrasting soils (acidic Cambisol and neutral Chernozem) in pots with a treatment of biochar co-applied with ammonium sulphate stabilised by a nitrification inhibitor (3,4-dimethylpyrazole-phosphate, DMPP) or un-stabilised. The combination of biochar with ammonium sulphate containing DMPP increased maize biomass yield up to 14%, N uptake up to 34% and NUE up to 13.7% compared to the sole application of ammonium sulphate containing DMPP. However, the combination of biochar with un-stabilised ammonium sulphate (without DMPP) had a soil-specific influence and increased maize biomass only by 3.8%, N uptake by 27% and NUE by 11% only in acidic Cambisol. Further, the biochar was able to increase the uptake of phosphorus (P) and potassium (K) in both stabilised and un-stabilised treatments of ammonium sulphate. Generally, this study demonstrated a superior effect from the combined application of biochar with ammonium sulphate containing DMPP, which improved NUE, uptake of P, K and increased maize biomass yield. Such a combination may lead to higher efficiency of fertilisation practices and reduce the amount of N fertiliser to be applied.

Metal chloride-loaded biochar for phosphorus recovery: Noteworthy roles of inherent minerals in precursor

Phosphorus (P) is a valuable resource, while it is vastly lost with wastewater causing eutrophication. In this study, to recover P, composite biochars were prepared by pyrolyzing biowaste impregnated with FeCl₃ or MgCl₂. It was found that inherent mineral profiles in the biowastes played important roles in interacting with metal chlorides and determined P sorption and precipitation. Specifically, two biowastes containing distinct mineral contents, sawdust and sediment, were selected as model components, being alone or mixed at 1:1 (w/w) to prepare biochars with low, moderate and high mineral contents. Results showed that biochar itself could not absorb P, while loading FeCl₃ or MgCl₂ achieved P recovery rates of approximate 60-100% and 50-100%, respectively, via electrostatic attraction or ligand exchange of PO₄^3- with -OH/-COOH, which was attributed to the enhanced positive charges and -OH/-COOH on the materials by these metal chlorides. Inherent minerals inhibited FeCl₃ transforming into Fe₃O₄ in pyrolysis and promoted generation of Fe₄(PO₄)₃(OH)₃ in P sorption, thus high-mineral content was more appropriate for FeCl₃ loading; however, precursors with low-mineral content was suitable for MgCl₂ loading, since the bulk-C in biochar acted as porous structure to support MgO crystals with high superficial area (∼255.85 m² g^-1). Besides, FeCl₃ and MgCl₂ both drove dissolution of inherent minerals significantly, while inherent minerals inhibited release of soluble Fe and Mg²⁺ into solution, which minimized secondary pollution. This study implied that in constructing composite biochar for catching P, the type of metal chloride should match the inherent minerals in biowastes to maximize P recovery and minimize secondary pollution.

Characterization and utilization of biochars derived from five invasive plant species Bidens pilosa L., Praxelis clematidea, Ipomoea cairica, Mikania micrantha and Lantana camara L. for Cd2+ and Cu2+ removal

Exotic invasive plants endanger the integrity of agricultural and natural systems throughout the world. Thus, the development of cost-effective and economic application of invasive plants is warranted. Here, we characterized fifteen biochars derived from five invasive plants at different temperatures (300, 500, and 700 °C) by determining their yield, ash content, pH, CEC, surface area, elementary composition, functional groups, and mineral composition. We conducted batch adsorption experiments to investigate the adsorption capacity and efficiency for Cd²⁺ and Cu²⁺ in wastewater. Our results suggest that all invasive plants are appropriate for biochar production, temperature and plant species had interacting effects on biochar properties, and the biochars pyrolyzed at 500 and 700 °C exhibited high metal adsorption capacity in neutral (pH = 7) solutions. The adsorption kinetics can be explained adequately by a pseudo-second-order model. BBC500 (Bidens pilosa L. derived biochar at 500 °C) and MBC500 (Mikania micrantha) exhibited higher metal equilibrium adsorption capacities (38.10 and 38.02 mg g^-1 for Cd²⁺, 20.01 and 20.10 mg g^-1 for Cu²⁺) and buffer abilities to pH than other biochars pyrolyzed at 500 °C. The Langmuir model was a better fit for IBC500 (Ipomoea cairica), MBC500, and LBC500 (Lantana camara L.) compared to the Freundlich model, whereas the opposite was true for BBC500 and PBC500 (Praxelis clematidea). These results suggest that the adsorption of metals by IBC500, MBC500, and LBC500 was mainly monolayer adsorption, while that by BBC500 and PBC500 was mainly chemical adsorption. Our results are important for the utilization and control of invasive plants as well as the decontamination of aqueous pollution.

Defect-rich porous carbon with anti-interference capability for adsorption of bisphenol A via long-range hydrophobic interaction synergized with short-range dispersion force

Wastewater features-directed design of an adsorbent is promising but challenging strategy for sustainable remediation of actual bisphenol A (BPA)-polluted water. Herein, we report that the discarded cigarette butt-derived porous carbon (AC-800) exhibit high capacity (865 mg/g), rapid reaction rate (186.9 mg/g/min) and outstanding durability for adsorption of BPA. Different from the most reported carbon-based adsorbents, quantitative structure-activity relationship studies unveil that graphitic defect plays a crucial role in the improvement of adsorptivity. Further studies illuminate that π-π interactions, electrostatic attraction and hydrogen-bond interaction play a negligible role whereas long-range hydrophobic interaction synergized with short-range dispersion force make a substantial contribution to BPA adsorption on AC-800. Benefited from this unique adsorption mechanism, AC-800 features a remarkable anti-interference capability and realizes the efficient clean-up of BPA from actual wastewater with complex backgrounds. This work sheds new light on mechanistic insight into the BPA adsorption on carbon-based materials and develops a fit-for-purpose designed adsorbent toward green remediation of practical wastewater.

Carbon material as a sustainable alternative towards boosting properties of urban soil and foster plant growth

Addition of carbon-based byproducts in urban soil is gaining popularity as a plant growth stimulator, soil quality enhancer and fostering green land vegetation. A 60-day trial experiment was carried out for investigating the impacts of sugarcane, neem and bamboo mixed biochar and polyvinyl chloride (PVC), polyethylene (PE) and polyethylene terephthalate (PET) mixed plastic char (1:100, 2:100 and 4:100 char: soil ratio) on physico-chemical properties of soil and growth of Dendrocalamus strictus saplings. It was found that available phosphorus increased from 412.16 to 586.88 kg h^-1 which could be attributed to reduced metal ion activity due to increase in the soil pH (7.75-7.81) and CEC (98.07-131.04 mEq 100 g^-1). The application of both the char enhanced the quality of soil and thereby helped in achieving higher crop yields. Both biochar and plastic char increased the soil pH, total organic carbon, available phosphorus and nitrogen in the soil. Additionally, the results showed an entirely positive influence of the chars on plant height thereby making it more suitable for the improvement of agricultural system and reducing the dependency on market-based fertilizers.

Hydrochar and pyrochar for sorption of pollutants in wastewater and exhaust gas: A critical review

Pollutants in wastewater and exhaust gas bring out serious concerns to public health and the environment. Biochar can be developed as a sustainable adsorbent originating from abundant bio-wastes, such as agricultural waste, forestry residue, food waste and human waste. Here we highlight the state-of-the-art research progress on pyrochar and hydrochar for the sorption of pollutants (heavy metal, organics, gas, etc) in wastewater and exhaust gases. The adsorption performance of pyrochar and hydrochar are compared and discussed in-depth, including preparation procedures (carbonization and activation), sorption possible mechanisms, and physiochemical properties. Challenges and perspective for designing efficient and environmental benign biochar-based adsorbents are finally addressed.

Surfactant-facilitated alginate-biochar beads embedded with PAH-degrading bacteria and their application in wastewater treatment

Immobilized Pseudomonas aeruginosa beads with alginate and biochar as composite carriers and a nonionic surfactant (TX100) as degradation promoter were prepared by the gel embedding method. The optimal preparation parameters for the biochar addition amount and the concentrations of the bacterial suspension and TX100 were 1%, OD₆₀₀ = 1 and 200 mg/L, respectively. The addition of TX100 can simultaneously promote biochar sorption of PAHs and PAH degradation by P. aeruginosa. The removal ratio of acenaphthene was 24% higher for the TX100-facilitated immobilized bacterial beads than the beads in the absence of TX100. The surfactant-facilitated immobilized bacterial beads can thoroughly remove PAHs in wastewater under the conditions of 10~50 °C, pH 2.5~10.5, and less than 0.2 mol/L NaCl. The immobilized bacterial beads are suitable for continuous-flow reactors, and 2-mm-diameter beads will achieve better application results than larger beads. The new immobilized material can be widely used in various wastewater treatment reactors and in the in situ remediation of organic polluted water.

Effect of pyrolysis temperature on the bioavailability of heavy metals in rice straw-derived biochar

The aim of this study was to investigate the stability of heavy metals in biochar derived from rice straw with heavy metal enrichment, and the relationship between pyrolysis temperature and the stability of heavy metals in biochar. The concentrations of heavy metals of rice straw and biochar (pyrolyzed at 300 °C, 500 °C, 700 °C, and 900 °C) were measured. The experiments of extraction and leaching were conducted to evaluate the effect of pyrolysis temperature on the stability of heavy metals in biochar. A pot experiment was conducted to investigate the environmental risk of heavy metals from biochar. The pyrolysis temperature affected the pH, total C, total N, surface structure, functional groups, and the concentrations of heavy metals in biochar. After being pyrolyzed, the bioavailable DTPA fraction of total Cu, Zn, Cd, and Pb of BC500, BC700, BC900, and BC900 decreased by 72.87%, 69.45%, 48.09% and 15.89%, respectively, in comparison with levels in rice straw. In addition, the leaching potential of heavy metals in biochar was significantly reduced. The pot experiment and the correlation analysis indicated that the pyrolysis temperature was not significantly related to the accumulation of heavy metals in aerial parts of rice seedlings. Increase in the pyrolysis temperature had a positive effect on increasing the stability and decreasing the mobility of heavy metals in biochar. However, the variations in the pyrolysis temperature were not the main factor to affect the uptake of heavy metals originated from biochar into the aerial parts of rice seedlings.

Effects of ageing on the surface characteristics and Cu(ii) adsorption behaviour of rice husk biochar in soil

The properties of rice husk biochar during the ageing process in soil and the resulting impacts on sorption capacity with respect to Cu(ii) were assessed. Rice husk-derived biochar was placed in fabric bags and buried in a plastic incubator filled with soil for 0–240 d. The aged biochar was then characterised and its sorption capacity compared with control (unaged) biochar in batch sorption experiments. The structural composition and morphology of the biochar before and after ageing were analysed based on element composition, scanning electron microscopy (SEM) coupled with energy X-ray dispersive spectroscopy (EDS), diffuse reflectance infrared Fourier transform infrared spectroscopy (DRIFTS), and X-ray photoelectron spectroscopy (XPS). The concentration of O, atomic O/C ratios, and carboxyl and hydroxyl functional groups increased at the surface of the biochar during ageing, which together indicated oxidation. Within the biochar particles, O/C ratios progressively increased towards their outer surfaces. Furthermore, ageing for more than 120 d facilitated Cu(ii) sorption as oxygen-containing groups were able to develop. The maximum adsorption capacity (qm) of biochar increased by 1.24 ∼ 1.32 times after ageing in the soil for 240 d. It is suggested that biochar surface properties were gradually altered during environmental exposure and the aged rice husk biochar showed increased performance in Cu(ii) adsorption. However, the performance of aged biochar as a soil remediator or conditioner will be affected by the ageing process and interactions among different soil components. As such, further research is required to evaluate these complex effects.

Proton uptake behaviors of organic and inorganic matters in biochars prepared under different pyrolytic temperatures

As an important part of biochar, surface functional group is the key interface between biochars and other phases, as well as an essential source of biochar's alkalinity and buffer abilities. However, due to the intricate organic and inorganic structures within biochars, the contribution from organic and inorganic matters to the functional groups remains unknown. In this work, the proton uptake curves were applied to study the functional groups of biochars via titration. Pine needle (PN) derived biochars with low inorganic content was selected for analyzing the organic functional groups variation under different pyrolysis temperatures. While rice straw (RS) derived biochars and the double-acid treated rice straw (DRS) derived biochars were compared for understanding the contributions from inorganic matters. The results indicate that the sorption behavior of proton onto biochars is surface adsorption, and the functional groups variation within PN biochars keeps consistent with reactions happened during pyrolysis. The inorganic matters within RS biochars contributed significantly to the buffering ability of biochars, and it is noteworthy to find that the contribution of inorganic matters of RS350, RS500, and RS700 on the total proton uptake stabilized at 67%, 84%, and 84% in the pH range of 2-8, respectively. As far as we know, this is the first report on separating the proton uptake ability of the organic and inorganic matters for biochars. The study on the interaction between biochars and proton will improve the estimation of the fate of ionizable pollutants, and the differentiation on the organic and inorganic matter contributions would benefit the understanding of biochar organic structures and inorganic structures.

Influences of feedstock sources and pyrolysis temperature on the properties of biochar and functionality as adsorbents: A meta-analysis

Biochar is a porous, amorphous, stable, and low-density carbon material derived from the carbonization of various biological residues. Biochars have multifunctional properties that make them promising adsorbents for the remediation of organic and inorganic contaminants from soil and water. High temperature treatment (HTT) and the properties of feedstocks are key factors influencing the properties of biochars. Feedstocks have distinctive physicochemical properties due to variations in elemental and structural composition, and they respond heterogeneously to specific pyrolysis conditions. The criteria for the selection of feedstocks and pyrolysis conditions for designing biochars for specific sorption properties are inadequately understood. We evaluated the influence of pyrolysis temperature on a wide range of feedstocks to investigate their effects on biochar properties. With increasing HTT, biochar pH, surface area, pore size, ash content, hydrophobicity and O/C vs. H/C (ratios that denote stability) increased, whereas, hydrophilicity, yield of biochar, O/C, and H/C decreased. Discriminant analysis of data from 533 published datasets revealed that biochar derived from hardwood (HBC) and softwood generally have greater surface area and carbon content, but lower content of oxygen and mineral constituents, than manure- (MBC) and grass-derived biochars (GBC). GBC and MBC have abundant oxygen-containing functional groups than SBC and HBC. The sequence of stability and aromaticity of feedstocks was MBC < GBC < SBC < HBC. Therefore, SBC and HBC are suitable for sorption of hydrophobic molecules. Biochars produced from low HTT are suitable for removal of ionic contaminants, whereas those produced at high HTT are suitable for removal of organic contaminants. The influences of biochar properties on sorption performance of heavy metals and organic contaminants are critically reviewed.

Can biochar reclaim coal mine spoil?

Surface coal mining activities completely destroy vegetation cover, soil and biodiversity. The aftermaths include huge coal mine spoil dumps, changed topography, drainage and landscape, deteriorated aesthetics and increased pollution load. These coal mine spoils are characterised by high rock fragments, extremely low water holding capacity, compacted and high bulk density, lack of organic carbon and plant nutrients, low cation exchange capacity, acidic pH and toxic metal contamination, which poses difficulties in reclamation. An array of studies has been focused on the sustainable use of biochar for restoration of degraded agricultural soil by improving the soil physicochemical, nutritional and biological properties. Although a volume of studies has been done on biochar application, its specialised application in reclamation of coal mine spoils is still atypical, also a systematic review on the mechanism by which biochar amends the mine spoil is lacking. This review focuses on i) factors affecting the biochar properties, ii) the mechanism involved in altering the physical, chemical and biological properties by biochar, (iii) remediation of potentially toxic elements in soil and restoration of degraded land using biochar, and, iv) highlighting the important aspects to be considered while using biochar for reclamation of coal mine spoil. Biochar prepared at 450 °C from a lignocellulosic rich biomass can be an alternative for reclamation for coal mine spoil. Review also suggested suitable methodologies for bulk production, application and economics of biochar in coal mine spoil reclamation.

Determination of optimal operating parameters for tetracycline removal by adsorption from synthetic and real aqueous solutions

Among all emerging contaminants, pharmaceutical compounds as tetracycline (TC) can cause potential environmental impact in water quality. In this work, the removal of TC drug on activated carbon from aqueous solution was studied and the best operating parameters were obtained. In addition, a real aqueous matrix was enriched with TC and the optimized conditions were applied to study the adsorption process efficiency. For this, the influence of pH, contact time between phases and dosage of adsorbent solid was evaluated. The investigation of kinetics, equilibrium and thermodynamic was also performed. The adsorbent material was characterized by SEM analysis and N₂ adsorption/desorption isotherms to confirm its properties. Batch experiments showed that the most suitable experimental conditions for adsorption in aqueous solution were: pH 4.0, contact time 90 min and dosage of adsorbent solid 30 g.L^-1. Under these conditions, it was possible to obtain 92.7% of TC removal with predominance of a spontaneous, favorable and endothermic chemisorption process. Adsorption experiments with real aqueous matrix provided 99.4% TC removal. These results show the potential of adsorption as a wastewater treatment applied to remove emerging pollutants as TC from real aqueous contaminated water.

Surface quinone-induced formation of aqueous reactive sulfur species controls pine wood biochar-mediated reductive dechlorination of hexachloroethane by sulfide

Understanding the mechanisms controlling the redox transformation of organic contaminants mediated by biochar is of great significance for application of biochar in remediation of contaminated soils and sediments. Here we investigated the mediation effect of a pine wood-derived biochar (P-char) in comparison with multiwalled carbon nanotubes (MCNTs) and graphite on the reductive dechlorination of hexachloroethane by sulfide. Upon normalization of the mediator's surface area, the reduction rate of hexachloroethane follows an order of P-char < MCNTs < graphite. Aqueous polysulfides and polysulfide free radicals were readily produced by reacting sulfide only with P-char, and the supernatant separated from the reaction system could account for 83.4% of the pseudo-kinetic rate constant of hexachloroethane mediated by P-char. In contrast, MCNTs and graphite had weak abilities to produce reactive sulfur species, and the supernatant exhibited very low reduction capability (<20.7%) of hexachloroethane. Electron paramagnetic resonance (EPR) analysis demonstrated that the surface quinone moieties on P-char induced the formation of polysulfides and polysulfide free radicals from sulfide by serving as one-electron acceptors. Consistently, polysulfides prepared by reacting elemental sulfur with sulfide showed much stronger reducing capability compared to sulfide. Thus, the mediation effect of P-char was dominantly attributed to the surface quinone-induced formation of reactive reducing sulfur species, whereas the mediation effect of MCNTs and graphite mainly stemmed from the enhanced electron transfer by the graphitized carbon. These results showed for the first time that surface quinone-induced formation of aqueous reactive sulfur species could control biochar-mediated reductive dechlorination of chloroorganic contaminants by sulfides.

The Trends in Research on the Effects of Biochar on Soil

The present study used bibliometric methods to analyze the literature regarding the biochar effects on soil that are included in the Web of Science Core Collection database and quantified the annual number of publications in the field and distribution of publications. Using CiteSpace as a visual analytic software for the literature, the distribution of the subject categories, author collaborations, institution collaborations, international (regional) collaborations, and cocitation and keyword clustering were analyzed. The results showed the basic characteristics of the literature related to the effects of biochar on soil. Furthermore, the main research powers in this field were identified. Then, we recognized the main intellectual base in the domain of biochar effects on soil. Meanwhile, this paper revealed the research hotspots and trends of this field. Furthermore, focuses of future research in this field are discussed. The present study quantitatively and objectively describes the research status and trends of biochar effects on soil from the bibliometric perspective to promote in-depth research in this field and provide reference information for scholars in the relevant fields to refine their research directions, address specific scientific issues, and help scholars to seek/establish relevant collaborations in their fields of interests.