Effect of a fullerene water suspension on bacterial phospholipids and membrane phase behavior

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Carbon-Based Materials for Photo-Triggered Theranostic Applications

Carbon-based nanomaterials serve as a type of smart material for photo-triggered disease theranostics. The inherent physicochemical properties of these nanomaterials facilitate their use for less invasive treatments. This review summarizes the properties and applications of materials including fullerene, nanotubes, nanohorns, nanodots and nanographenes for photodynamic nanomedicine in cancer and antimicrobial therapies. Carbon nanomaterials themselves do not usually act as photodynamic therapy (PDT) agents owing to the high hydrophobicity, however, when the surface is passivated or functionalized, these materials become great vehicles for PDT. Moreover, conjugation of carbonaceous nanomaterials with the photosensitizer (PS) and relevant targeting ligands enhances properties such as selectivity, stability, and high quantum yield, making them readily available for versatile biomedical applications.

Effects of DO levels on surface force, cell membrane properties and microbial community dynamics of activated sludge

In this paper, we employ atomic force microscopy (AFM), fluorescence recovery after photobleaching (FRAP) technique, phospholipid fatty acids (PLFA) and MiSeq analysis to study the effects of traditional dissolved oxygen (DO) levels (0.71-1.32mg/L, 2.13-3.02mg/L and 4.31-5.16mg/L) on surface force, cell membrane properties and microbial community dynamics of activated sludge. Results showed that low DO level enhanced the surface force and roughness of activated sludge; the medium DO level decreased cell membrane fluidity by reducing the synthesis of branched fatty acids in the cell membrane; high DO level resulted in the highest protein content in the effluent by EEM scanning. Abundance of Micropruina, Zoogloea and Nakamurella increased and Paracoccus and Rudaea decreased with the increase of DO levels. RDA analysis suggested that saturated fatty acids (SFA), anteiso-fatty acids (AFA) and iso-fatty acids (IFA) were closely related to effluent quality as well as some genera.

Carbon Nanomaterials as Antibacterial Colloids

Carbon nanomaterials like graphene, carbon nanotubes, fullerenes and the various forms of diamond have attracted great attention for their vast potential regarding applications in electrical engineering and as biomaterials. The study of the antibacterial properties of carbon nanomaterials provides fundamental information on the possible toxicity and environmental impact of these materials. Furthermore, as a result of the increasing prevalence of resistant bacteria strains, the development of novel antibacterial materials is of great importance. This article reviews current research efforts on characterizing the antibacterial activity of carbon nanomaterials from the perspective of colloid and interface science. Building on these fundamental findings, recent functionalization strategies for enhancing the antibacterial effect of carbon nanomaterials are described. The review concludes with a comprehensive outlook that summarizes the most important discoveries and trends regarding antibacterial carbon nanomaterials.

Physiological and transcriptomic analyses reveal mechanistic insight into the adaption of marine Bacillus subtilis C01 to alumina nanoparticles

An increasing number of studies have investigated the effects of nanoparticles (NPs) on microbial systems; however, few existing reports have focused on the defense mechanisms of bacteria against NPs. Whether secondary metabolism biosynthesis is a response to NP stress and contributes to the adaption of bacteria to NPs is unclear. Here, a significant induction in the surfactin production and biofilm formation were detected by adding Al2O3 NPs to the B. subtilis fermentation broth. Physiological analysis showed that Al2O3 NP stress could also affect the cell and colony morphogenesis and inhibit the motility and sporulation. Exogenously adding commercial surfactin restored the swarming motility. Additionally, a suite of toxicity assays analyzing membrane damage, cellular ROS generation, electron transport activity and membrane potential was used to determine the molecular mechanisms of toxicity of Al2O3 NPs. Furthermore, whole transcriptomic analysis was used to elucidate the mechanisms of B. subtilis adaption to Al2O3 NPs. These results revealed several mechanisms by which marine B. subtilis C01 adapt to Al2O3 NPs. Additionally, this study broadens the applications of nanomaterials and describes the important effects on secondary metabolism and multicellularity regulation by using Al2O3 NPs or other nano-products.

Toxicological impact of cadmium-based quantum dots towards aquatic biota: Effect of natural sunlight exposure

Cadmium-based quantum dots (QDs) are increasingly applied in existent and emerging technologies, especially in biological applications due to their exceptional photophysical and functionalization properties. However, they are very toxic compounds due to the high reactive and toxic cadmium core. The present study aimed to determine the toxicity of three different QDs (CdS 380, CdS 480 and CdSeS/ZnS) before and after the exposure of suspensions to sunlight, in order to assess the effect of environmentally relevant irradiation levels in their toxicity, which will act after their release to the environment. Therefore, a battery of ecotoxicological tests was performed with organisms that cover different functional and trophic levels, such as Vibrio fischeri, Raphidocelis subcapitata, Chlorella vulgaris and Daphnia magna. The results showed that core-shell type QDs showed lower toxic effects to V. fischeri in comparison to core type QDs before sunlight exposure. However, after sunlight exposure, there was a decrease of CdS 380 and CdS 480 QD toxicity to bacterium. Also, after sunlight exposure, an effective decrease of CdSeS/ZnS and CdS 480 toxicity for D. magna and R. subcapitata, and an evident increase in CdS 380 QD toxicity, at least for D. magna, were observed. The results of this study suggest that sunlight exposure has an effect in the aggregation and precipitation reactions of larger QDs, causing the degradation of functional groups and formation of larger bulks which may be less prone to photo-oxidation due to their diminished surface area. The same aggregation behaviour after sunlight exposure was observed for bare QDs. These results further emphasize that the shell of QDs seems to make them less harmful to aquatic biota, both under standard environmental conditions and after the exposure to a relevant abiotic factor like sunlight.

Environmental application of nanotechnology: air, soil, and water

Global deterioration of water, soil, and atmosphere by the release of toxic chemicals from the ongoing anthropogenic activities is becoming a serious problem throughout the world. This poses numerous issues relevant to ecosystem and human health that intensify the application challenges of conventional treatment technologies. Therefore, this review sheds the light on the recent progresses in nanotechnology and its vital role to encompass the imperative demand to monitor and treat the emerging hazardous wastes with lower cost, less energy, as well as higher efficiency. Essentially, the key aspects of this account are to briefly outline the advantages of nanotechnology over conventional treatment technologies and to relevantly highlight the treatment applications of some nanomaterials (e.g., carbon-based nanoparticles, antibacterial nanoparticles, and metal oxide nanoparticles) in the following environments: (1) air (treatment of greenhouse gases, volatile organic compounds, and bioaerosols via adsorption, photocatalytic degradation, thermal decomposition, and air filtration processes), (2) soil (application of nanomaterials as amendment agents for phytoremediation processes and utilization of stabilizers to enhance their performance), and (3) water (removal of organic pollutants, heavy metals, pathogens through adsorption, membrane processes, photocatalysis, and disinfection processes).

Future prospects of antibacterial metal nanoparticles as enzyme inhibitor

Nanoparticles are being widely used as antibacterial agents with metal nanoparticles emerging as the most efficient antibacterial agents. There have been many studies which have reported the mechanism of antibacterial activity of nanoparticles on bacteria. In this review we aim to emphasize on all the possible mechanisms which are involved in the antibacterial activity of nanoparticles and also to understand their mode of action and role as bacterial enzyme inhibitor by comparing their antibacterial mechanism to that of antibiotics with enzyme inhibition as a major mechanism. With the emergence of widespread antibiotic resistance, nanoparticles offer a better alternative to our conventional arsenal of antibiotics. Once the biological safety of these nanoparticles is addressed, these nanoparticles can be of great medical importance in our fight against bacterial infections.

Effects of fullerene (C60), multi-wall carbon nanotubes (MWCNT), single wall carbon nanotubes (SWCNT) and hydroxyl and carboxyl modified single wall carbon nanotubes on riverine microbial communities

Commercial production of nanoparticles (NP) has created a need for research to support regulation of nanotechnology. In the current study, microbial biofilm communities were developed in rotating annular reactors during continuous exposure to 500 μg L(-1) of each nanomaterial and subjected to multimetric analyses. Scanning transmission X-ray spectromicroscopy (STXM) was used to detect and estimate the presence of the carbon nanomaterials in the biofilm communities. Microscopy observations indicated that the communities were visibly different in appearance with changes in abundance of filamentous cyanobacteria in particular. Microscale analyses indicated that fullerene (C60) did not significantly (p < 0.05) impact algal, cyanobacterial or bacterial biomass. In contrast, MWCNT exposure resulted in a significant decline in algal and bacteria biomass. Interestingly, the presence of SWCNT products increased algal biomass, significantly in the case of SWCNT-COOH (p < 0.05) but had no significant impact on cyanobacterial or bacterial biomass. Thymidine incorporation indicated that bacterial production was significantly reduced (p < 0.05) by all nanomaterials with the exception of fullerene. Biolog assessment of carbon utilization revealed few significant effects with the exception of the utilization of carboxylic acids. PCA and ANOSIM analyses of denaturing gradient gel electrophoresis (DGGE) results indicated that the bacterial communities exposed to fullerene were not different from the control, the MWCNT and SWNT-OH differed from the control but not each other, whereas the SWCNT and SWCNT-COOH both differed from all other treatments and were significantly different from the control (p < 0.05). Fluorescent lectin binding analyses also indicated significant (p < 0.05) changes in the nature and quantities of exopolymer consistent with changes in microbial community structure during exposure to all nanomaterials. Enumeration of protozoan grazers showed declines in communities exposed to fullerene or MWCNT but a trend for increases in all SWCNT exposures. Observations indicated that at 500 μg L(-1), carbon nanomaterials significantly alter aspects of microbial community structure and function supporting the need for further evaluation of their effects in aquatic habitats.

Carbon Nanomaterials in Agriculture: A Critical Review

There has been great interest in the use of carbon nano-materials (CNMs) in agriculture. However, the existing literature reveals mixed effects from CNM exposure on plants, ranging from enhanced crop yield to acute cytotoxicity and genetic alteration. These seemingly inconsistent research-outcomes, taken with the current technological limitations for in situ CNM detection, present significant hurdles to the wide scale use of CNMs in agriculture. The objective of this review is to evaluate the current literature, including studies with both positive and negative effects of different CNMs (e.g., carbon nano-tubes, fullerenes, carbon nanoparticles, and carbon nano-horns, among others) on terrestrial plants and associated soil-dwelling microbes. The effects of CNMs on the uptake of various co-contaminants will also be discussed. Last, we highlight critical knowledge gaps, including the need for more soil-based investigations under environmentally relevant conditions. In addition, efforts need to be focused on better understanding of the underlying mechanism of CNM-plant interactions.

Zinc oxide induces the stringent response and major reorientations in the central metabolism of Bacillus subtilis

Microorganisms, such as bacteria, are one of the first targets of nanoparticles in the environment. In this study, we tested the effect of two nanoparticles, ZnO and TiO2, with the salt ZnSO4 as the control, on the Gram-positive bacterium Bacillus subtilis by 2D gel electrophoresis-based proteomics. Despite a significant effect on viability (LD50), TiO2 NPs had no detectable effect on the proteomic pattern, while ZnO NPs and ZnSO4 significantly modified B. subtilis metabolism. These results allowed us to conclude that the effects of ZnO observed in this work were mainly attributable to Zn dissolution in the culture media. Proteomic analysis highlighted twelve modulated proteins related to central metabolism: MetE and MccB (cysteine metabolism), OdhA, AspB, IolD, AnsB, PdhB and YtsJ (Krebs cycle) and XylA, YqjI, Drm and Tal (pentose phosphate pathway). Biochemical assays, such as free sulfhydryl, CoA-SH and malate dehydrogenase assays corroborated the observed central metabolism reorientation and showed that Zn stress induced oxidative stress, probably as a consequence of thiol chelation stress by Zn ions. The other patterns affected by ZnO and ZnSO4 were the stringent response and the general stress response. Nine proteins involved in or controlled by the stringent response showed a modified expression profile in the presence of ZnO NPs or ZnSO4: YwaC, SigH, YtxH, YtzB, TufA, RplJ, RpsB, PdhB and Mbl. An increase in the ppGpp concentration confirmed the involvement of the stringent response during a Zn stress. All these metabolic reorientations in response to Zn stress were probably the result of complex regulatory mechanisms including at least the stringent response via YwaC.

Effects of carbon nanotubes on atrazine biodegradation by Arthrobacter sp

The environmental risks of engineered nanoparticles have attracted attention. However, little is known regarding the effects of carbon nanotubes (CNTs) on the biodegradation and persistence of organic contaminants in water. We investigated the impacts of pristine and oxidized multiwalled CNTs on the atrazine biodegradation rate and efficiency using Arthrobacter sp. At a concentration of 25mg/L, the CNTs enhanced the biodegradation rate by up to 20%; however, at a concentration of 100mg/L, the CNTs decreased the biodegradation rate by up to 50%. The stimulation effects resulted from enhanced bacterial growth and the overexpression of degradation genes. The inhibitory effects resulted from the toxicity of the CNTs at high concentrations. The differences between the two CNTs at tested concentrations were not significant. The biodegradation efficiency was not impacted by adsorption, and the pre-adsorbed atrazine on the CNTs was fully biodegraded when the CNT concentration was ≤25mg/L. This finding was consistent with the lack of observable desorption hysteresis for atrazine on the tested CNTs. Our results indicate that CNTs can enhance or inhibit biodegradation through a balance of two effects: the toxic effects on microbial activity and the effects of the changing bioavailability that result from adsorption and desorption.

nTiO₂ induced changes in intracellular composition and nutrient stoichiometry in primary producer--cyanobacteria

The widely and increasing use of nano-titanium dioxide (nTiO2) has led to its release in the environment and concerns of consequent impact on aquatic eco-relevant biota. Previous studies indicated possible physiological changes (i.e., nitrogen storage) induced by nano-titanium dioxide (nTiO2) exposure in algae, which will likely have ecological implications. This study investigated the short- (96 h) and long-term (21 days) ecotoxic impact of environmentally relevant nTiO2 concentrations on the cellular biochemical pools and nutrient stoichiometry in the nitrogen-fixing cyanobacteria Anabaena variabilis. Changes in nutrient element ratios and cellular composition were analyzed using both chemical elemental analysis and Fourier Transform Infrared (FT-IR) spectroscopy. Chemical elemental analysis showed that exposure to nTiO2 at varying dose concentrations and exposure duration led to statistically significant changes in intracellular C:N, C:P and N:P stoichiometries compared with those in the controls. In general, there seemed to be a decreasing trends of cellular C:N ratio and increase in the cellular C:P and N:P ratios with the increasing level of nTiO2 exposure. Further FT-IR analysis results revealed both temporal and dose-dependent change patterns of major macromolecules, including protein, lipids, nucleic acids and carbohydrates, in A. variabilis upon nTiO2 exposure. The relative ratio of amide II, lipids, nucleic acids and carbohydrates to the cellular protein content (quantified as amide I stretch) changed significantly within the initial 96 h of exposure and, both the magnitude of changes and levels of recovery seemed to be nTiO2 dose-dependent. This study, for the first time, demonstrated that the intracellular composition and nutrient stoichiometry changes could be induced by long-term and short-term exposures to nTiO2 to primary producers, which may have ecological implications for interspecies equilibriums and community dynamics in aquatic ecosystems.

Effect of cultivation media on the toxicity of ZnO nanoparticles to freshwater and marine microalgae

The aim of this work was to investigate the effect of zinc oxide nanoparticles (ZnO NPs) on freshwater and marine microalgae cultivated in different media. Freshwater species Chlorococcum sp. and Scenedesmus rubescens were cultivated in modified Blue-Green medium (BG-11) and Bold's Basal Medium (BBM), and marine species Dunaliella tertiolecta, and Tetraselmis suesica, cultured in salt modified BG-11 and f/2 medium. The microalgae species were exposed for 96 h with a daily reading of algal growth rate, to different ZnO NPs concentrations (0.081-810 mg/L). Significant differences were observed on microalgae growth rates, with the marine being more sensitive than the freshwater species, as revealed by their half inhibitory concentration values (IC50). The IC50 values in freshwater species were affected by the culture medium. The lowest IC50 values (<2.57 mg/L) were observed in the marine species. S. rubescens showed the less toxic effect in cultures with modified BG-11, compared to BBM cultures, with IC50 values >810 mg/L and 14.27 mg/L after 96 h exposure time, respectively. ZnO nanoparticles appeared to have toxic effects in all species tested, depended on the species type, the exposure time, the NPs concentration, and mainly the culture medium.

Antimicrobial photodynamic therapy with fulleropyrrolidine: photoinactivation mechanism of Staphylococcus aureus, in vitro and in vivo studies

A family of N-methylpyrrolidinium fullerene iodide salts has been intensively studied to determine their applicability in antimicrobial photodynamic therapy (APDT). This study examined in vitro the efficacy of a C₆₀ fullerene functionalized with one methylpyrrolidinium group to kill upon irradiation with white light gram-negative and gram-positive bacteria, as well as fungal cells, and the corresponding mechanism of the fullerene bactericidal action. The in vitro studies revealed that the high antistaphylococcal efficacy of functionalized fullerene could be linked to their ability to photogenerate singlet oxygen and superoxide anion. Following Staphylococcus aureus photoinactivation, no modifications of its genomic DNA were detected. In contrast, photodamage of the cell envelope seemed to be a dominant mechanism of bactericidal action. In in vivo studies, a 2 log₁₀ reduction in the average bioluminescent radiance between treated and non-treated mice was reached. One day post APDT treatment, moist and abundant growth of bacteria could be observed on wounds of non-fulleropyrrolidine and dark control mice. APDT-treated wounds stayed visibly clear up to the third day. Moreover, cytotoxicity test on human dermal keratinocytes revealed great safety of using the sensitizer toward eukaryotic cells. These data indicate potential application of functionalized fullerene as antistaphylococcal sensitizer for superficial infections.

Unique toxicological behavior from single-wall carbon nanotubes separated via selective adsorption on hydrogels

Over the past decade, extensive research has been completed on the potential threats of single-wall carbon nanotubes (SWCNTs) to living organisms upon release to aquatic systems. However, these studies have focused primarily on the link between adverse biological effects in exposed test organisms on the length, diameter, and metallic impurity content of SWCNTs. In contrast, few studies have focused on the bioeffects of the different SWCNTs in the as-produced mixture, which contain both metallic (m-SWCNT) and semiconducting (s-SWCNT) species. Using selective adsorption onto hydrogels, high purity m-SWCNT and s-SWCNT fractions were produced and their biological impacts determined in dose-response studies with Pseudokirchneriella subcapitata as test organism. The results show significant differences in the biological responses of P. subcapitata exposed to high purity m- and s-SWCNT fractions. Contrary to the biological response observed using SWCNTs separated by density gradient ultracentrifugation, it is found that the high-pressure CO conversion (HiPco) s-SWCNT fraction separated by selective adsorption causes increased biological impact. These findings suggest that s-SWCNTs are the primary factor driving the adverse biological responses observed from P. subcapitata cells exposed to our as-produced suspensions. Finally, the toxicity of the s-SWCNT fraction is mitigated by increasing the concentration of biocompatible surfactant in the suspensions, likely altering the nature of surfactant coverage along SWCNT sidewalls, thereby reducing potential physical interaction with algal cells. These findings highlight the need to couple sample processing and toxicity response studies.

A fullerene colloidal suspension stimulates the growth and denitrification ability of wastewater treatment sludge-derived bacteria

Fullerene (C60) is a nanoparticle that has been widely studied and applied in numerous commodities. However, there are concerns regarding its potential negative impact on the environment. A fullerene colloidal suspension (nC60) is known for its property of selectively inhibiting the growth of microorganisms. In this study, using denaturing gradient gel electrophoresis fingerprinting technology, we found that fullerene altered the structure of a sludge-derived microbial community. Specifically, the bacteria from Bacillus, Acidovorax and Cloacibacterium genera were enriched in abundance when supplemented with nC60 at pH 6.5 under aerobic conditions. The effects of the fullerene colloidal suspension on a strain of Bacillus isolated from the same microbial community were evaluated to further characterize the growth-stimulating effect of nC60. The biomass of cultures of this strain incubated with nC60 concentrations ranging from 3 mg L(-1) to 7 mg L(-1) was approximately twice that of the control during the stationary phase. The fullerene also induced higher superoxide dismutase activity in Bacillus cereus. Furthermore, the nitrate removal rate of B. cereus increased to nearly 55% in the presence of 5 mg L(-1) nC60, compared to 35% for the control. Meanwhile, the cumulative loading amount of nitrite was reduced from 33 μg mL(-1) to 25 μg mL(-1) by the addition of 5 mg L(-1) nC60. Our results demonstrate that the fullerene colloidal suspension is conditionally capable of promoting the growth and denitrification metabolism of certain bacteria, such as B. cereus. Fullerene might have both inhibitory and stimulatory effects on microorganisms in various environments.

Mechanism of antibacterial activity of copper nanoparticles

In a previous communication, we reported a new method of synthesis of stable metallic copper nanoparticles (Cu-NPs), which had high potency for bacterial cell filamentation and cell killing. The present study deals with the mechanism of filament formation and antibacterial roles of Cu-NPs in E. coli cells. Our results demonstrate that NP-mediated dissipation of cell membrane potential was the probable reason for the formation of cell filaments. On the other hand, Cu-NPs were found to cause multiple toxic effects such as generation of reactive oxygen species, lipid peroxidation, protein oxidation and DNA degradation in E. coli cells. In vitro interaction between plasmid pUC19 DNA and Cu-NPs showed that the degradation of DNA was highly inhibited in the presence of the divalent metal ion chelator EDTA, which indicated a positive role of Cu(2+) ions in the degradation process. Moreover, the fast destabilization, i.e. the reduction in size, of NPs in the presence of EDTA led us to propose that the nascent Cu ions liberated from the NP surface were responsible for higher reactivity of the Cu-NPs than the equivalent amount of its precursor CuCl2; the nascent ions were generated from the oxidation of metallic NPs when they were in the vicinity of agents, namely cells, biomolecules or medium components, to be reduced simultaneously.

Modification of Fatty acids in membranes of bacteria: implication for an adaptive mechanism to the toxicity of carbon nanotubes

We explored whether bacteria could respond adaptively to the presence of carbon nanotubes (CNTs) by investigating the influence of CNTs on the viability, composition of fatty acids, and cytoplasmic membrane fluidity of bacteria in aqueous medium for 24 h exposure. The CNTs included long single-walled carbon nanotubes (L-SWCNTs), short single-walled carbon nanotubes (S-SWCNTs), short carboxyl single-walled carbon nanotubes (S-SWCNT-COOH), and aligned multiwalled carbon nanotubes (A-MWCNTs). The bacteria included three common model bacteria, Staphyloccocus aureus (Gram-positive), Bacillus subtilis (Gram-positive), and Escherichia coli (Gram-negative), and one polybrominated diphenyl ether degrading strain, Ochrobactrum sp. (Gram-negative). Generally, L-SWCNTs were the most toxic to bacteria, whereas S-SWCNT-COOH showed the mildest bacterial toxicity. Ochrobactrum sp. was more susceptible to the toxic effect of CNTs than E. coli. Compared to the control in the absence of CNTs, the viability of Ochrobactrum sp. decreased from 71.6-81.4% to 41.8-70.2%, and E. coli from 93.7-104.0% to 67.7-91.0% when CNT concentration increased from 10 to 50 mg L(-1). The cytoplasmic membrane fluidity of bacteria increased with CNT concentration, and a significant negative correlation existed between the bacterial viabilities and membrane fluidity for E. coli and Ochrobactrum sp. (p < 0.05), indicating that the increase in membrane fluidity induced by CNTs was an important factor causing the inactivation of bacteria. In the presence of CNTs, E. coli and Ochrobactrum sp. showed elevation in the level of saturated fatty acids accompanied with reduction in unsaturated fatty acids, compensating for the fluidizing effect of CNTs. This demonstrated that bacteria could modify their composition of fatty acids to adapt to the toxicity of CNTs. In contrast, S. aureus and B. subtilis exposed to CNTs increased the proportion of branched-chain fatty acids and decreased the level of straight-chain fatty acids, which was also favorable to counteract the toxic effect of CNTs. This study suggests that the bacterial tolerances to CNTs are associated with both the adaptive modification of fatty acids in the membrane and the physicochemical properties of CNTs. This is the first report about the physiologically adaptive response of bacteria to CNTs, and may help to further understand the ecotoxicological effects of CNTs.

Ecotoxicity of pristine graphene to marine organisms

The ecotoxicity of pristine graphene nanoparticles (GNC1, PGMF) in model marine organisms was investigated. PGMF resulted more toxic than GNC1 to the bioluminescent bacterium Vibrio fischeri and the unicellular alga Dunaliella tertiolecta on the basis of EC50 values (end-points: inhibition of bioluminescence and growth, respectively). No acute toxicity was demonstrated with respect to the crustacean Artemia salina although light microscope images showed the presence of PGMF and GNC1 aggregates into the gut; a 48-h exposure experiment revealed an altered pattern of oxidative stress biomarkers, resulting in a significant increase of catalase activities in both PGMF and GNC1 1mg/L treated A. salina and a significant increase of glutathione peroxidase activities in PGMF (0.1 and 1mg/L) treated A. salina. Increased levels of lipid peroxidation of membranes was also observed in PGMF 1mg/L exposed A. salina.

Single-walled carbon nanotubes alter soil microbial community composition

Recent developments in nanotechnology may lead to the release of nanomaterials into the natural environment, such as soils, with largely unknown consequences. We investigated the effects of single-walled carbon nanotubes (SWCNTs), one of the most widely used nanomaterials, on soil microbial communities by incubation of soils to which powder or suspended forms of SWCNTs were added (0.03 to 1 mg g(-1) soil). To determine changes in soil microbial community composition, phospholipid fatty acid (PLFA) profiles were analyzed at 25th day of the incubation experiment. The biomass of major microbial groups including Gram-positive and Gram-negative bacteria, and fungi showed a significant negative relationship with SWCNT concentration, while the relative abundance of bacteria showed a positive relationship with SWCNT concentration. Furthermore, soils under distinct concentrations of SWCNT treatments had PLFA profiles that were significantly different from one another. Our results indicate that the biomass of a broad range of soil microbial groups is negatively related with SWCNT concentration and upon entry into soils, SWCNTs may alter microbial community composition. Our results may serve as foundation for scientific guideline on regulating the discharge of nanomaterials such as SWCNTs to the soil ecosystem.

The physiological effects of multi-walled carbon nanotubes (MWCNTs) on conidia and the development of the entomopathogenic fungus, Metarhizium anisopliae (Metsch.) Sorok

The aim of the study was an in vitro evaluation of the effect of MWCNTs on the conidia of two strains of entomopathogenic fungus, Metarhizium anisopliae. The study made use of water suspensions of MWCNTs (concentration ∼ 3 mg·mL(-1)) made from commercial nanotubes and centrifuged. The conidia were placed in contact with nanotubes for 240 h. An assessment of MWCNT influence on conidia was performed after 1, 24, 72 and 240 h and focused on the linear growth of vegetative mycelium derived from these conidia, mycelium sporulation in subcultures and pathogenicity. Using TEM imaging, it was demonstrated that carbon nanotubes are able to damage cell membranes of the examined fungi conidia. However, the absence was noted of a significantly fungistatic effect of both MWCNT suspensions on the examined strains with respect to the physiological features in question. The increase in vegetative mycelium effected by spores after contact with MWCNTs was characterized by a slight modification in relation to the control. There was no strong trend (inhibition - stimulation), in relation to the effect of the tested suspension of carbon nanotubes, on the development of the vegetative mycelium in in vitro culture. Sporulation of the mycelium after completion of the culture only occurred in one case (strain Ma73F and culture of spores after 24-h contact with MWCNTs) significantly more intensely than in the controls. With respect to pathogenicity for test insects compared to the control strain, Ma73F spores grown from the longest contact with nanotubes suspensions performed significantly better. On the basis of the calculated of mycelium index growth rates and the time of death of the test insects (LT50), it was found that the adverse effects of water suspension MWCNTs on the spores of M. anisopliae were applied after a short contact with biological material. This indicates unfavorable physical rather than chemical effects on the tested cell. Over time, nanotube aggregation in water suspensions led to changes in their influence on the cells under examination.

Interaction of fullerene nanoparticles with biomembranes: from the partition in lipid membranes to effects on mitochondrial bioenergetics

Partition and localization of C60 and its derivative C60(OH)18-22 in lipid membranes and their impact on mitochondrial activity were studied, attempting to correlate those events with fullerene characteristics (size, surface chemistry, and surface charge). Fluorescence quenching studies suggested that C60(OH)18-22 preferentially populated the outer regions of the bilayer, whereas C60 preferred to localize in deeper regions of the bilayer. Partition coefficient values indicated that C60 exhibited higher affinity for dipalmitoylphosphatidylcholine and mitochondrial membranes than C60(OH)18-22. Both fullerenes affected the mitochondrial function, but the inhibitory effects promoted by C60 were more pronounced than those induced by C60(OH)18-22 (up to 20 nmol/mg of mitochondrial protein). State 3 and p-trifluoromethoxyphenylhydrazone-uncoupled respirations are inhibited by both fullerenes when glutamate/malate or succinate was used as substrate. Phosphorylation system and electron transport chain of mitochondria are affected by both fullerenes, but only C60 increased the inner mitochondrial membrane permeability to protons, suggesting perturbations in the structure and dynamics of that membrane. At concentrations of C60(OH)18-22 above 20 nmol/mg of mitochondrial protein, the activity of FoF1-ATP synthase was also decreased. The evaluation of transmembrane potential showed that the mitochondria phosphorylation cycle decreased upon adenosine diphosphate addition with increasing fullerenes concentration and the time of the repolarization phase increased as a function of C60(OH)18-22 concentration. Our results suggest that the balance between hydrophilicity and hydrophobicity resulting from the surface chemistry of fullerene nanoparticles, rather than the cluster size or the surface charge acquired by fullerenes in water, influences their membrane interactions and consequently their effects on mitochondrial bioenergetics.

Responses of anaerobic granule and flocculent sludge to ceria nanoparticles and toxic mechanisms

Effects of CeO2-NPs on anaerobic fermentation were investigated from the processes of acidification and methanation with anaerobic granule sludge and anaerobic flocculent sludge as the targets. Results showed that acidification process was more sensitive to CeO2-NPs than methanation process. Both types of sludge produced less short-chain fatty acid compared to the control, with a reduction of 15-19% for the flocculent sludge at the dosage of 5, 50 and 150 mg CeO2-NPs/g-VSS, and a reduction of 35% for the granular sludge at 150 mg CeO2-NPs/g-VSS. CeO2-NPs caused no inhibition to methanation process. Most of CeO2-NPs distributed on the surface of sludge as revealed by fluorescence labeled CeO2-NPs. The toxicity of CeO2-NPs to anaerobic sludge did not result from reactive oxygen species. Physical penetration and membrane reduction may be important toxic mechanisms.

Effects of Nanoparticles on the Environment and Outdoor Workplaces

Today, most parts of different nanotechnologies are growing and developing without any special rules and regulations. This could result in undesirable changes in the environment and affect workers in indoor and outdoor workplaces. Carbon-based nanoparticles, such as fullerenes, nanotubes, the oxides of metals such as iron and titanium, and natural inorganic compounds, including asbestos and quartz, can have biological effects on the environment and human health. The risk assessment of such nanoparticles requires evaluation of their mobility, reactivity, environmental toxicity, and stability. With the increasing use of nanoparticles for commercial and industrial purposes, the debate becomes whether the numerous benefits of nanoparticles can overcome the economic costs, environmental impacts, and unknown risks resulting from their use. To date, few studies have been conducted on the toxic and environmental effects that result from direct and indirect exposure to nanoparticles, and there are no clear standards to determine their effects. Lack of technical information in this regard has provided an appropriate context for supporters and opponents of nanoparticles to present contradictory and ill-considered results. Such an uncertain atmosphere has caused increased concerns about the effects of nanoparticles. Therefore, adequate studies to determine the exact, real risks of the use of nanoparticles are required. The information resulting from these studies can be useful in minimizing the environmental hazards that could arise from the use of nanoparticles. Thus, this paper briefly explains the classification of environmental nanoparticles and how to deal with their formation, diffusion, environmental fate and impacts, and our exposure to them.

Harmful Impact of ZnS Nanoparticles on Daphnia sp. in the Western Part (Districts of Bankura and Purulia) of West Bengal, India

ZnS nanoparticles of different sizes are synthesized employing a simple wet chemical method. These nanoparticles are used to study their impact on the Daphnia sp. through traditional toxicity tests. The percentage of mortality is found to increase initially with increasing nanoparticle concentration or exposure time and is finally found to saturate for higher concentrations or exposure times. Mortality is found to be higher for smaller particles. Hopping frequency and heart rate are also found to increase with increasing nanoparticle exposure time for a fixed nanoparticle concentration. These observations can be attributed to the enhanced surface photooxidation property of the ZnS nanoparticles. Thus the present study will help people to understand the hitherto unknown harmful impact of ZnS nanoparticles on aquatic organisms in the western part of West Bengal (Bankura and Purulia districts), India.

Toxicological effects induced by the nanomaterials fullerene and nanosilver in the polychaeta Laeonereis acuta (Nereididae) and in the bacteria communities living at their surface

Fullerene (nC60) and nanosilver (nAg) are nanomaterials with bactericide properties. The increments in their use raise questions about their potential environmental impacts, including estuarine ones. The polychaete Laeonereis acuta (Nereididae) secretes mucus that is colonized by bacteria communities. We analyzed the antioxidant and oxidative damage responses of anterior, middle and posterior region of L. acuta and bacteria communities after nC60 or nAg exposure during 24 h. Molecular analysis showed a prevalence of Vibrio genera in the communities. Bacteria biomass was lowered in worms exposed to 1.0 mg/L of nAg. nC60 reduced total antioxidant capacity of bacteria from worms exposed to 0.1 mg/L. Worms anterior region presented lower antioxidant capacity after exposure to 1.0 mg nC60/L, and the same was observed in the posterior region of worms exposed to 1.0 mg nAg/L. Lipid peroxidation was reduced in the anterior region of worms exposed to nC60 and the opposite was observed in the posterior region.

Controlled release matrices and micro/nanoparticles of chitosan with antimicrobial potential: development of new strategies for microbial control in agriculture

The control of micro-organisms responsible for pre- and postharvest diseases of agricultural products, mainly viruses and fungi, is a problem that remains unresolved, together with the environmental impact of the excessive use of chemicals to tackle this problem. Current efforts are focused on the search for efficient alternatives for microbial control that will not result in damage to the environment or an imbalance in the existing biota. One alternative is the use of natural antimicrobial compounds such as chitosan, a linear cationic biopolymer, which is biodegradable, biocompatible and non-toxic, has filmogenic properties and is capable of forming matrices for the transport of active substances. The study of chitosan has attracted great interest owing to its ability to form complexes or matrices for the controlled release of active compounds such as micro- and nanoparticles, which, together with the biological properties of chitosan, has allowed a major breakthrough in the pharmaceutical and biomedical industries. Another important field of study is the development of chitosan-based matrices for the controlled release of active compounds in areas such as agriculture and food for the control of viruses, bacteria and fungi, which is one of the least exploited areas and holds much promise for future research.

Effects of tungsten and titanium oxide nanoparticles on the diazotrophic growth and metals acquisition by Azotobacter vinelandii under molybdenum limiting condition

The acquisition of essential metals, such as the metal cofactors (molybdenum (Mo) and iron (Fe)) of the nitrogenase, the enzyme responsible for the reduction of dinitrogen (N(2)) to ammonium, is critical to N(2) fixing bacteria in soil. The release of metal nanoparticles (MNPs) to the environment could be detrimental to N(2) fixing bacteria by introducing a new source of toxic metals and by interfering with the acquisition of essential metals such as Mo. Since Mo has been reported to limit nonsymbiotic N(2) fixation in many ecosystems from tropical to cold temperate, this question is particularly acute in the context of Mo limitation. Using a combination of microbiology and analytical chemistry techniques, we have evaluated the effect of titanium (Ti) and tungsten (W) oxide nanoparticles on the diazotrophic growth and metals acquisition in pure culture of the ubiquitous N(2) fixing bacterium Azotobacter vinelandii under Mo replete and Mo limiting conditions. We report that under our conditions (≤10 mg·L(-1)) TiO(2) NPs have no effects on the diazotrophic growth of A. vinelandii while WO(3) NPs are highly detrimental to the growth especially under Mo limiting conditions. Our results show that the toxicity of WO(3) NPs to A. vinelandii is due to an interference with the catechol-metalophores assisted uptake of Mo.

Impact of sunlight and humic acid on the deposition kinetics of aqueous fullerene nanoparticles (nC60)

Nanoparticle transport in natural settings is complex due to interactions with the surrounding environment. In this study, the impact of UVA irradiation and humic acid (HA) on deposition of aqueous fullerene nanoparticles (nC₆₀) on a silica surface as a surrogate for natural sediments was studied using packed column experiments and quartz crystal microbalance with dissipation monitoring under various solution conditions. Surface oxidation of nC₆₀ induced by UVA irradiation greatly retarded its deposition due to the increased negative surface charge and hydrophilicity. Dissolved HA, once adsorbed onto the nC₆₀ surface, also hindered its deposition mainly through steric hindrance forces. The extent of this effect depended on the properties and the amount of HA adsorbed, which is a function of ionic strength and HA concentration. HA has limited adsorption on UVA-irradiated nC₆₀ and is expected to play a less important role in its stability. HA immobilized onto the silica surface had a variable effect on nC₆₀ deposition, depending on the complex interplay of Derjaguin-Landau-Verwey-Overbeek (DLVO) and non-DLVO interactions such as electrostatic interaction, steric hindrance, and hydrogen bonding as well as HA molecular conformation. These results highlight the importance of environment-induced changes in nC₆₀ surface chemistry in its fate and transport in aquatic environments.

Organic photovoltaics: potential fate and effects in the environment

In times of dwindling fossil fuels it is particularly crucial to develop novel "green" technologies in order to cover the increasing worldwide demand for energy. Organic photovoltaic solar cells (OPVs) are promising as a renewable energy source due to low energy requirement for production, low resource extraction, and no emission of greenhouse gasses during use. In contrast to silicium-based solar cells, OPVs offer the advantages of light-weight, semi-transparency and mechanical flexibility. As to a possible forthcoming large-scale production, the environmental impact of such OPVs should be assessed and compared to currently best available technologies. For the first time, this review compiles the existing knowledge and identifies gaps regarding the environmental impact of such OPVs in a systematic manner. In this regard, we discuss the components of a typical OPV layer by layer. We discuss the probability of enhanced release of OPV-borne components into the environment during use-phase (e.g. UV- and biodegradation) and end-of-life phase (e.g. incineration and waste disposal). For this purpose, we compiled available data on bioavailability, bioaccumulation, biodegradation, and ecotoxicity. Whereas considerable research has already been carried out concerning the ecotoxicity of certain OPV components (e.g. nanoparticles and fullerenes), others have not been investigated at all so far. In conclusion, there is a general lack of information about fate, behavior as well as potential ecotoxicity of most of the main OPV components and their degradation/transformation products. So far, there is no evidence for a worrying threat coming from OPVs, but since at present, no policy and procedures regarding recycling of OPVs are in action, in particular improper disposal upon end-of-life might result in an adverse effect of OPVs in the environment when applied in large-scale.

Effects of C60 on the Salmonella typhimurium TA100 transcriptome expression: Insights into C60 -mediated growth inhibition and mutagenicity

Rapid advances are being made in the creation and use of nanomaterials, but little is known about the impact these materials might have on key microbial functions if introduced into the environment. Previous studies have generated conflicting results with respect to the impact of fullerenes on microbial activity. In the present study, Salmonella typhimurium TA100 was selected as a model microbial system with which to investigate further the impact of C(60) aggregates on microbial growth, mutagenicity, and global transcript expression. Aggregates of C(60) predominantly less than 100 nm significantly impacted Salmonella growth at concentrations of ≥ 0.5 mg/L. In addition, C(60) aggregates also displayed mutagenic potential at concentrations ≥ 0.1 mg/L. Transcript expression analysis of S. typhimurium TA100 exposed to C(60) for 24 h indicated that 271 transcripts had significant differential expression relative to controls with twofold or more change. Of particular interest was the increased expression of transcripts coding for proteins involved in energy metabolism, amino acid biosynthesis, transcription, and DNA metabolism, and the decreased expression of transcripts coding for proteins involved in protein fate, transport, and binding and bacterial secretion systems. Collectively, these data indicate that C(60) interacts with the outer membrane of S. typhimurium TA100, resulting in delayed growth and mutagenicity, most likely by interfering with key transport functions and inducing a stress response, respectively.

Acclimation of Tetrahymena thermophila to bulk and nano-TiO2 particles by changes in membrane fatty acids saturation

We provide experimental evidence that changes in the membrane fatty acid profile of Tetrahymena thermophila incubated with nano- or bulk TiO(2) particle are not accompanied by ROS generation or lipid peroxidation. Consequently these changes are interpreted as acclimation to unfavorable conditions and not as toxic effects. T. thermophila cells were exposed to TiO(2) particles at different concentrations for 24h at 32°C. Treatment of cultures with nano- and bulk TiO(2) particles resulted in changes of membrane fatty acid profile, indicating increased membrane rigidity, but no lipid peroxidation or ROS generation was detected. There were no differences in membrane composition when T. thermophila was exposed to nanosized or bulk-TiO(2) particles. We also observed reversible filling of food vacuoles, but this was different in case of nano- or bulk TiO(2) exposure. Our results suggest that interactions of particles and cell membranes are independent of oxidative stress.

Practical considerations for conducting ecotoxicity test methods with manufactured nanomaterials: what have we learnt so far?

This review paper reports the consensus of a technical workshop hosted by the European network, NanoImpactNet (NIN). The workshop aimed to review the collective experience of working at the bench with manufactured nanomaterials (MNMs), and to recommend modifications to existing experimental methods and OECD protocols. Current procedures for cleaning glassware are appropriate for most MNMs, although interference with electrodes may occur. Maintaining exposure is more difficult with MNMs compared to conventional chemicals. A metal salt control is recommended for experiments with metallic MNMs that may release free metal ions. Dispersing agents should be avoided, but if they must be used, then natural or synthetic dispersing agents are possible, and dispersion controls essential. Time constraints and technology gaps indicate that full characterisation of test media during ecotoxicity tests is currently not practical. Details of electron microscopy, dark-field microscopy, a range of spectroscopic methods (EDX, XRD, XANES, EXAFS), light scattering techniques (DLS, SLS) and chromatography are discussed. The development of user-friendly software to predict particle behaviour in test media according to DLVO theory is in progress, and simple optical methods are available to estimate the settling behaviour of suspensions during experiments. However, for soil matrices such simple approaches may not be applicable. Alternatively, a Critical Body Residue approach may be taken in which body concentrations in organisms are related to effects, and toxicity thresholds derived. For microbial assays, the cell wall is a formidable barrier to MNMs and end points that rely on the test substance penetrating the cell may be insensitive. Instead assays based on the cell envelope should be developed for MNMs. In algal growth tests, the abiotic factors that promote particle aggregation in the media (e.g. ionic strength) are also important in providing nutrients, and manipulation of the media to control the dispersion may also inhibit growth. Controls to quantify shading effects, and precise details of lighting regimes, shaking or mixing should be reported in algal tests. Photosynthesis may be more sensitive than traditional growth end points for algae and plants. Tests with invertebrates should consider non-chemical toxicity from particle adherence to the organisms. The use of semi-static exposure methods with fish can reduce the logistical issues of waste water disposal and facilitate aspects of animal husbandry relevant to MMNs. There are concerns that the existing bioaccumulation tests are conceptually flawed for MNMs and that new test(s) are required. In vitro testing strategies, as exemplified by genotoxicity assays, can be modified for MNMs, but the risk of false negatives in some assays is highlighted. In conclusion, most protocols will require some modifications and recommendations are made to aid the researcher at the bench.

Nanomaterial-based treatments for medical device-associated infections

Bacterial infections remain one of the biggest concerns to our society. Conventional antibiotic treatments showed little effect on the increasing number of antibiotic-resistant bacteria. Advances in synthetic chemistry and nanotechnology have resulted in a new class of nanometer-scale materials with distinguished properties and great potential to be an alternative for antibiotics. In this Minireview, we address the current situation of medical-device-associated infections and the emerging opportunities for antibacterial nanomaterials in preventing these complications. Several important antimicrobial nanomaterials emergent from advances in synthesis chemistry are introduced and their bactericidal mechanisms are analyzed. In addition, concerns regarding the biocompatibility of such materials are also addressed.

Concentration-dependent effects of carbon nanoparticles in gram-negative bacteria determined by infrared spectroscopy with multivariate analysis

With increasing production of carbon nanoparticles (CNPs), environmental release of these entities becomes an ever-greater inevitability. However, many questions remain regarding their impact on soil microorganisms. This study examined the effects of long or short multiwalled carbon nanotubes (MWCNTs), C60 fullerene and fullerene soot in Gram-negative bacteria. Attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy was applied to derive signature spectral fingerprints of effects. A concentration-dependent response in spectral alterations was observed for each nanoparticle type. Long or short MWCNTs and fullerene soot gave rise to similar alterations to lipids, Amide II and DNA. The extent of alteration varies with nanoparticle size, with smaller short MWCNTs resulting in greater toxicity than long MWCNTs. Fullerene soot was the least toxic. C60 results in the most distinct and largest overall alterations, notably in extensive protein alteration. This work demonstrates a novel approach for assaying and discriminating the effects of CNPs in target systems.

Preparation and characterization of stable aqueous higher-order fullerenes

Stable aqueous suspensions of nC₆₀ and individual higher fullerenes, i.e. C₇₀, C₇₆ and C₈₄, are prepared by a calorimetric modification of a commonly used liquid-liquid extraction technique. The energy requirement for synthesis of higher fullerenes has been guided by molecular-scale interaction energy calculations. Solubilized fullerenes show crystalline behavior by exhibiting lattice fringes in high resolution transmission electron microscopy images. The fullerene colloidal suspensions thus prepared are stable with a narrow distribution of cluster radii (42.7 ± 0.8 nm, 46.0 ± 14.0 nm, 60 ± 3.2 nm and 56.3 ± 1.1 nm for nC₆₀, nC₇₀, nC₇₆ and nC₈₄, respectively) as measured by time-resolved dynamic light scattering. The ζ-potential values for all fullerene samples showed negative surface potentials with similar magnitude ( - 38.6 ± 5.8 mV, - 39.1 ± 4.2 mV, - 38.9 ± 5.8 mV and - 41.7 ± 5.1 mV for nC₆₀, nC₇₀, nC₇₆ and nC₈₄, respectively), which provide electrostatic stability to the colloidal clusters. This energy-based modified solubilization technique to produce stable aqueous fullerenes will likely aid in future studies focusing on better applicability, determination of colloidal properties, and understanding of environmental fate, transport and toxicity of higher-order fullerenes.

Production and consumption of reactive oxygen species by fullerenes

Reactive oxygen species (ROS) are one of the most important intermediates in chemical, photochemical, and biological processes. To understand the environmental exposure and toxicity of fullerenes better, the production and consumption of ROS (singlet oxygen, superoxide, hydrogen peroxide, and hydroxyl radicals) by Buckminster fullerene (C(60) ) and fullerenol were investigated in aqueous systems. Fullerenol exhibits higher photoproduction efficiency of singlet oxygen and superoxide than aqueous suspensions of C(60) aggregates (aqu/nC(60) ), and this higher efficiency results in higher steady-state concentrations of these two ROS. Transmission electron microscopy indicates that the C(60) molecules in aqu/nC(60) are much more closely packed than the C(60) cages in fullerenol. These observations provide additional evidence that the lower ROS production efficiency of aqu/nC(60) is attributable primarily to efficient self-quenching of C(60) triplet states. Production of singlet oxygen by aqu/nC(60) is accelerated by increasing oxygen concentration and in part is sensitized by fluorescent photoproducts that accumulate during irradiation. The fullerenes react slowly with singlet oxygen (second-order rate constant <4 × 10(5)  M(-1)  s(-1) ), but react rapidly with hydroxyl radicals (second-order rate constants of 5.4 × 10(9) and 4 × 10(8)  M(-1)  s(-1) for aqu/nC(60) and fullerenol, respectively). These results show that environmental conditions, including light exposure and oxygen concentration, have the potential to impact the generation of toxic ROS by fullerenes.

Environmental implications of nanomaterials: are we studying the right thing?

A fundamental lack of data on the potential impacts of carbon based nanomaterials on natural ecosystems currently exists. The gap between what we know about environmental impacts and new products that may contain nanomaterials continues to get wider especially related to knowledge about nanocomposites. In this paper we present ideas and concerns about the current state of knowledge on nanomaterials in the environment and present a number of points about what recent work has provided us about the novel materials.

Biologic responses of bacteria communities living at the mucus secretion of common carp (Cyprinus carpio) after exposure to the carbon nanomaterial fullerene (C60)

Bacteria communities living in mucus secretions of common carp Cyprinus carpio (Cyprinidae) were exposed to the organic nanomaterial fullerene (C(60)) to evaluate its potential bactericidal effects. End points analyzed were viability, growth, reactive oxygen species (ROS) concentration, and total antioxidant competence against peroxyl radicals. Viability was not affected (p > 0.05), whereas growth was arrested (p < 0.05) after 3 hours of exposure to the three concentration of C(60) assayed (0.1, 1, and 10 mg/L). Levels of RO measured at different C(60) concentration showed that some colonies were reactive (significant dose-response relation, p < 0.05) to C(60), whereas others were not. The nonreactive colonies to C(60) presented higher antioxidant competence to peroxyl radicals compared with the reactive colonies (p < 0.05). The strains isolated and identified by polymerase chain reaction (PCR) products of 16S rRNA showed a predominance of Aeromonas genus between all the isolated Gram-negative bacteria. Thus, the present results indicate that C(60) affects bacterial communities that live in mucus secretions of common carp.

DNA exposure to buckminsterfullerene (C60): toward DNA stability, reactivity, and replication

Buckminsterfullerene (C(60)) has received great research interest due to its extraordinary properties and increasing applications in manufacturing industry and biomedical technology. We recently reported C(60) could enter bacterial cells and bind to DNA molecules. This study was to further determine how the DNA-C(60) binding affected the thermal stability and enzymatic digestion of DNA molecules, and DNA mutations. Nano-C(60) aggregates and water-soluble fullerenols were synthesized and their impact on DNA biochemical and microbial activity was investigated. Our results revealed that water-soluble fullerenols could bind to lambda DNA and improve DNA stability remarkably against thermal degradation at 70-85 °C in a dose-dependent manner. DNase I and HindIII restriction endonuclease activities were inhibited after interacting with fullerenols at a high dose. Experimental results also showed the different influence of fullerenol and nano-C(60) on their antibacterial mechanisms, where fullerenols contributed considerable impact on cell damage and mutation rate. This preliminary study indicated that the application of fullerenols results in significant changes in the physical structures and biochemical functions of DNA molecules.

"Nanoantibiotics": a new paradigm for treating infectious diseases using nanomaterials in the antibiotics resistant era

Despite the fact that we live in an era of advanced and innovative technologies for elucidating underlying mechanisms of diseases and molecularly designing new drugs, infectious diseases continue to be one of the greatest health challenges worldwide. The main drawbacks for conventional antimicrobial agents are the development of multiple drug resistance and adverse side effects. Drug resistance enforces high dose administration of antibiotics, often generating intolerable toxicity, development of new antibiotics, and requests for significant economic, labor, and time investments. Recently, nontraditional antibiotic agents have been of tremendous interest in overcoming resistance that is developed by several pathogenic microorganisms against most of the commonly used antibiotics. Especially, several classes of antimicrobial nanoparticles (NPs) and nanosized carriers for antibiotics delivery have proven their effectiveness for treating infectious diseases, including antibiotics resistant ones, in vitro as well as in animal models. This review summarizes emerging efforts in combating against infectious diseases, particularly using antimicrobial NPs and antibiotics delivery systems as new tools to tackle the current challenges in treating infectious diseases.