Solute-Solvent Interactions in Modern Physical Organic Chemistry: Supramolecular Polymers as a Muse

Evolution of Transient Luminescent Assemblies Regulated by Trace Water in Organic Solvents

Trace water in organic solvents can play a crucial role in the construction of supramolecular assemblies, which has not gained enough attention until very recent years. Herein, we demonstrate that residual water in organic solvents plays a decisive role in the regulation of the evolution of assembled structures and their functionality. By adding Mg(ClO₄)₂ into a multi-component organic solution containing terpyridine-based ligand 3Tpy and monodentate imidazole-based ligand M2, the system underwent an unexpected kinetic evolution. Metallo-supramolecular polymers (MSP) formed first by the coordination of 3Tpy and Mg²⁺, but they subsequently decomposed due to the interference of M2, resulting in a transient MSP system. Further investigation revealed that this occurred because residual water in the solvent and M2 cooperatively coordinated with Mg²⁺. This allowed M2 to capture Mg²⁺ from MSP, which led to depolymerization. However, owing to the slow reaction between trace water/M2/Mg²⁺, the formation of MSP still occurred first. Therefore, water regulated both the thermodynamics and kinetics of the system and was the key factor for constructing the transient MSP. Fine-tuning the water content and other assembly motifs regulated the assembly evolution pathway, tuned the MSP lifetime, and made the luminescent color of the system undergo intriguing transition processes over time.

Methionine-Derived Organogels as Lubricant Additives Enhance the Continuity of the Oil Film through Dynamic Self-Healing Assembly

(S)-2-((1-(Hexadecylamino)-4-(methylthio)-1-oxobutan-2-yl)carbamoyl)benzoic acid (HMTA) was efficiently synthesized and successfully applied as an additive to several types of blank lubricant oils. Initially, HMTA self-assembles to fibrous structures and traps blank lubricant oils to form gel lubricants. The prepared gel lubricants show thermo-reversible properties and enhanced lubricating performance by 3∼5-fold. X-ray photoelectron spectrometry of the metal surface and the quartz crystal microbalance illustrated that there are no obvious interactions between HMTA and the metal surface. The results of Fourier transform infrared spectroscopy and X-ray diffraction further confirm that inter/intro-molecular H-bonding interactions are the main driving force for the self-healing of HMTA. Finally, molecular dynamics (MD) simulations show that the number of noncovalent H-bonding interactions fluctuates with time, and this highly dynamic H-bonding network could regulate the self-assembly process and result in the self-healing property of the HMTA organogel, which is consistent with the results of the step-strain tests. Especially, the Hirshfeld independent gradient model method at the quantum level demonstrated that C8/C9 aromatics of 500SN have strong π-π stacking interactions with the aromatic heads of HMTA and van der Waals interactions with the hydrophobic tails of HMTA, which disrupt the self-assembly behavior of the 500SN model. Therefore, the calculation studies offer a rational explanation for the superior lubricant property of the PAO10 gel as compared to that for 500SN.

Synthesis and Polymerization of an ortho-para-Substituted Tetraalkoxy [2.2]Paracylophane-1,9-diene

This contribution describes the synthesis of an unsymmetrical substituted tetraalkoxy[2.2]paracylophane-1,9-diene comprised of an ortho-substituted and a para-substituted dioctyloxybenzene. (S_p)-4,5,12,15-tetraoctyloxy-[2.2]paracyclophane-1,9-diene ((S_p)-pCpd) and (R_p)-4,5,13,16-tetraoctyloxy-[2.2]paracyclophane-1,9-diene ((R_p)-pCpd) are formed as planar chiral enantiomers. Unlike other tetraalkoxy-substituted pCpds that form as diastereomers, both the (S_p)-pCpd and the (R_p)-pCpd can be polymerized via ring-opening metathesis polymerization (ROMP) using Grubbs' third generation initiator (G3) as it is achiral. Living ROMP afford copolymers featuring alternating cis,trans-poly(p-phenylenevinylene)s (PPV)s. The polymers' unique, blue-shifted optical properties are due to the alkoxy-substitution in the polymer's backbone and the resulting materials could be photoisomerized to the all-trans polymer. This strategy affords tetraalkoxy-pCpd monomers in high yields for the polymerization of soluble PPVs with low or narrow dispersities.

Solvent Organization and Electrostatics Tuned by Solute Electronic Structure: Amide versus Non-Amide Carbonyls

The ability to exploit carbonyl groups to measure electric fields in enzymes and other complex reactive environments by using the vibrational Stark effect has inspired growing interest in how these fields can be measured, tuned, and ultimately designed. Previous studies have concentrated on the role of the solvent in tuning the fields exerted on the solute. Here, we explore instead the role of the solute electronic structure in modifying the local solvent organization and electric field exerted on the solute. By measuring the infrared absorption spectra of amide-containing molecules, as prototypical peptides, and contrasting them with non-amide carbonyls in a wide range of solvents, we show that these solutes experience notable differences in their frequency shifts in polar solvents. Using vibrational Stark spectroscopy and molecular dynamics simulations, we demonstrate that while some of these differences can be rationalized by using the distinct intrinsic Stark tuning rates of the solutes, the larger frequency shifts for amides and dimethylurea primarily result from the larger solvent electric fields experienced by their carbonyl groups. These larger fields arise due to their stronger p-π conjugation, which results in larger C═O bond dipole moments that further induce substantial solvent organization. Using electronic structure calculations, we decompose the electric fields into contributions from solvent molecules that are in the first solvation shell and those from the bulk and show that both of these contributions are significant and become larger with enhanced conjugation in solutes. These results show that structural modifications of a solute can be used to tune both the solvent organization and electrostatic environment, indicating the importance of a solute-centric paradigm in modulating and designing the electrostatic environment in condensed-phase chemical processes.

Conformation Dynamics of Single Polymer Strands in Solution

Conformational changes in macromolecules significantly affect their functions and assembly into high-level structures. Despite advances in theoretical and experimental studies, investigations into the intrinsic conformational variations and dynamic motions of single macromolecules remain challenging. Here, liquid-phase transmission electron microscopy enables the real-time tracking of single-chain polymers. Imaging linear polymers, synthetically dendronized with conjugated aromatic groups, in organic solvent confined within graphene liquid cells, directly exhibits chain-resolved conformational dynamics of individual semiflexible polymers. These experimental and theoretical analyses reveal that the dynamic conformational transitions of the single-chain polymer originate from the degree of intrachain interactions. In situ observations also show that such dynamics of the single-chain polymer are significantly affected by environmental factors, including surfaces and interfaces.

Direct Participation of Solvent Molecules in the Formation of Supramolecular Polymers

This article reports supramolecular polymerization of two bis-amide functionalized naphthalene-diimide (NDI) building blocks (NDI-L and NDI-C) in two solvents, namely n-heptane (Hep) and methylcyclohexane (MCH). NDI-L and NDI-C differ only by the peripheral hydrocarbon wedges, consisting of linear C7 chains or cyclic methylcyclohexane rings, respectively. UV/Vis and FTIR spectroscopy studies reveal distinct internal order and H-bonding pattern for NDI-L and NDI-C aggregates irrespective of the solvent system, indicating the dominant role of the intrinsic packing parameters of the individual building block, possibly influenced by the peripheral steric crowding. However, NDI-L produces a significantly stronger gel in Hep compared to MCH as evident from the rheological and thermal properties. In contrast, NDI-C exhibits a clear preference for MCH, producing gel with moderate strength but in Hep it fails to produce 1D morphology or gelation. All-atom molecular dynamics (MD) simulation studies corroborate with the experimental observation and provide the rationale for the observed solvent-shape effect by revealing a quantitative estimate regarding the thermodynamics of self-assembly in these four combinations. Such clear-cut shape-matching effect (between the peripheral hydrocarbon wedge and the solvent system) unambiguously support a direct participation of the solvent molecules during supramolecular polymerization and presence of a closely-adhered solvent shell around the supramolecular polymers, similar to the first layer of water molecules around the protein surface. Solvent induced CD experiments support this hypothesis as induced CD band was observed only from a chiral co-solvent of matching shape. This is reconfirmed by the higher de-solvation temperature of the shape-matching NDI/solvent system combination compared to the shape mis-match combination in variable temperature UV/Vis experiments, revealing transformation to a different aggregate at higher temperatures rather than disassembly to the monomer for all four combinations.

In Situ Probe Supramolecular Self-Assembly Dynamics and Chirality Transfer Mechanism at Air-Water Interface

The study of supramolecular self-assembly dynamics and the chirality transfer mechanism is of importance to the rational design of potentially functional chiral supramolecular materials and an understanding of the origin of homochirality in biological systems. Herein, we study the supramolecular assemblies constructed by the tetrakis(4-sulfonatophenyl) porphyrin (TPPS) molecules' adsorption on the enantiomer chiral amphiphilic molecules (l-/d-G12) using sum-frequency generation (SFG) and second harmonic generation (SHG) spectra. We first establish a dynamic model that involved adsorption and assembly and obtained the dynamic parameters by fitting this model. We then propose the chiral transfer mechanism from the chiral center of the l-/d-G12 molecule to the whole supramolecular assembly. Finally, we put forward an explanation that the sulfonic acid group and the phenyl group on the TPPS molecule show homochirality, but the porphyrin ring forms J-aggregation and shows mirror-symmetric structural chirality in the l-/d-G12 and TPPS self-assembly at these processes.

Chiral molecular nanosilicas

Molecular nanoparticles including polyoxometalates, proteins, fullerenes and polyhedral oligosiloxane (POSS) are nanosized objects with atomic precision, among which POSS derivatives are the smallest nanosilicas. Incorporation of molecular nanoparticles into chiral aggregates either by chiral matrices or self-assembly allows for the transfer of supramolecular chirality, yet the construction of intrinsic chirality with atomic precision in discrete molecules remains a great challenge. In this work, we present a molecular folding strategy to construct giant POSS molecules with inherent chirality. Ferrocenyl diamino acids are conjugated by two or four POSS segments. Hydrogen bonding-driven folding of diamino acid arms into parallel β-sheets facilitates the chirality transfer from amino acids to ferrocene and POSS respectively, disregarding the flexible alkyl spacers. Single crystal X-ray structures, density functional theory (DFT) calculations, circular dichroism and vibrational circular dichroism spectroscopy clearly verify the preferential formation of one enantiomer containing chiral molecular nanosilicas. The chiral orientation and chiroptical properties of POSS show pronounced dependence on the substituents of α-amino acids, affording an alternative way to control the folding behavior and POSS chirality in addition to the absolute configuration of amino acids. Through the kinetic nanoprecipitation protocol, one-dimensional aggregation enables chirality transfer from the molecular scale to the micrometer scale, self-assembling into helices in accordance with the packing propensity of POSS in a crystal phase. This work, by illustrating the construction of chiral molecular nanosilicas, paves a new way to obtain discrete chiral molecular nanoparticles for potential chiroptical applications.

Anomalous Chiral Transfer: Supramolecular Polymerization in a Chiral Medium of a Mesogenic Molecule

Here, we report a medium-to-polymer anomalous chiral transfer in supramolecular polymerization of a tetraphenylporphyrinbased achiral hydrogen-bonding monomer ( TPP ) in a chiral medium of 5-cyanobiphenyl CB* . A mixture of TPP in ( R )- CB* ([ TPP ] = 7.7 mol%) at 40 °C gave a columnar oblique LC mesophase, where the individual columns were composed of an optically active helical supramolecular polymer of TPP as a consequence of a successful medium-to-polymer chiral transfer. Meanwhile, upon dilution of CB* with achiral 5-cyanobiphenyl CB , the optical activity of the system showed an anomalous bell-shaped dependency on the composition of CB* / CB , where the g abs value of 0.049 at CB* / CB = 50/50 was 6.0 times larger than the g abs value of CB* alone. Such anomalous chiroptical amplification in CD is most likely due to a change in the stacking geometry of TPP in the oblique columnar LC upon lateral compression.

Selective solvent conditions influence sequence development and supramolecular assembly in step-growth copolymerization

Sequence control in synthetic copolymers remains a tantalizing objective in polymer science due to the influence of sequence on material properties and self-organization. A greater understanding of sequence development throughout the polymerization process will aid the design of simple, generalizable methods to control sequence and tune supramolecular assembly. In previous simulations of solution-based step-growth copolymerizations, we have shown that weak, non-bonding attractions between monomers of the same type can produce a microphase separation among the lengthening nascent oligomers and thereby alter sequence. This work explores the phenomenon further, examining how effective attractive interactions, mediated by a solvent selective for one of the reacting species, impact the development of sequence and the supramolecular assembly in a simple A-B copolymerization. We find that as the effective attractions between monomers increase, an emergent self-organization of the reactants causes a shift in reaction kinetics and sequence development. When the solvent-mediated interactions are selective enough, the simple mixture of A and B monomers oligomerize and self-assemble into structures characteristic of amphiphilic copolymers. The composition and morphology of these structures and the sequences of their chains are sensitive to the relative balance of affinities between the comonomer species. Our results demonstrate the impact of differing A-B monomer-solvent affinities on sequence development in solution-based copolymerizations and are of consequence to the informed design of synthetic methods for sequence controlled amphiphilic copolymers and their aggregates.

Biasing the Hierarchy Motifs of Nanotoroids: from 1D Nanotubes to 2D Porous Networks

Hierarchical organization of self-assembled structures into superstructures is omnipresent in Nature but has been rarely achieved in synthetic molecular assembly due to the absence of clear structural rules. We herein report on the self-assembly of scissor-shaped azobenzene dyads which form discrete nanotoroids that further organize into 2D porous networks. The steric demand of the peripheral aliphatic units diminishes the trend of the azobenzene dyad to constitute stackable nanotoroids in solution, thus affording isolated (unstackable) nanotoroids upon cooling. Upon drying, these nanotoroids organize at graphite surface to form well-defined 2D porous networks. The photoirradiation with UV and visible light enabled reversible dissociation and reconstruction of nanotoroids through the efficient trans↔cis isomerization of azobenzene moieties in solution.

Hierarchical self-assembly of aromatic peptide conjugates into supramolecular polymers: it takes two to tango

Supramolecular polymers are self-assembled materials displaying adaptive and responsive "life-like" behaviour which are often made of aromatic compounds capable of engaging in π-π interactions to form larger assemblies. Major advances have been made recently in controlling their mode of self-assembly, from thermodynamically-controlled isodesmic to kinetically-controlled living polymerization. Dynamic covalent chemistry has been recently implemented to generate dynamic covalent polymers which can be seen as dynamic analogues of biomacromolecules. On the other hand, peptides are readily-available and structurally-rich building blocks that can lead to secondary structures or specific functions. In this context, the past decade has seen intense research activity in studying the behaviour of aromatic-peptide conjugates through supramolecular and/or dynamic covalent chemistries. Herein, we review those impressive key achievements showcasing how aromatic- and peptide-based self-assemblies can be combined using dynamic covalent and/or supramolecular chemistry, and what it brings in terms of the structure, self-assembly pathways, and function of supramolecular and dynamic covalent polymers.

Design and Control of Perylene Supramolecular Polymers through Imide Substitutions

The number and type of new supramolecular polymer (SMP) systems have increased rapidly in recent years. Some of the key challenges faced for these novel systems include gaining full control over the mode of self-assembly, the creation of novel architectures and exploring functionality. Here, we provide a critical overview of approaches related to perylene-based SMPs and discuss progress to exert control over these potentially important SMPs through chemical modification of the imide substituents. Imide substitutions affect self-assembly behaviour orthogonally to the intrinsic optoelectronic properties of the perylene core, making for a valuable approach to tune SMP properties. Several recent approaches are therefore highlighted, with a focus on controlling 1) morphology, 2) H- or J- aggregation, and 3) mechanism of growth and degree of aggregation using thermodynamic and kinetic control. Areas of potential future exploration and application of these functional SMPs are also explored.

A cucurbit[8]uril-stabilized 3D charge transfer supramolecular polymer with a remarkable confinement effect for enhanced photocatalytic proton reduction and thioether oxidation

A water-soluble porous supramolecular polymer is assembled through a CB[8]-based 2 + 2 host–guest binding motif, which can greatly increase the efficiency of photocatalysis.

Thermoresponsive Supramolecular Assemblies from Dendronized Amphiphiles To Form Fluorescent Spheres with Tunable Chirality

Balance between self-association of structural units and self-repulsion from crowding-induced steric hindrance accounts for the supramolecular assembly of the amphiphilic entities to form ordered structures, and solvation provides a toolbox to conveniently modulate the assemblies through differential interactions to various structural units. Here we report solvation-modulated supramolecular chiral assembly in aqueous solutions of amphiphilic dendronized tetraphenylethylenes (TPEs) with three-folded dendritic oligoethylene glycols (OEGs) through dipeptide Ala-Gly linkage. These dendronized amphiphiles can form supramolecular spheres with enhanced supramolecular chirality, which is tunable and dependent on solvation. These nanosized spherical aggregates exhibit thermoresponsive behavior, and their cloud point temperatures are dependent on mixed solvent of water and THF. The phase transition temperatures increase with water fractions due to water-driven shifting of OEG moieties from interiors of the aggregates to their peripheries. Furthermore, the thermally induced dehydration and collapse of OEG moieties mediate the reversible aggregation and deaggregation between the spheres, imparting tunable aggregation-induced fluorescent emission (AIE) and supramolecular chirality. Both experimental results and molecular dynamic simulations have highlighted that reversible chirality transformations of the amphiphilic dendronized assemblies mediated by solvation through change solvent quality or thermally dehydration are dependent on the balance between interactions of OEG dendrons with TPE moieties and with the solvent molecules.

A computational study of competing conformational selection and induced fit in an abiotic system

Host-guest complexations can be described by two competing mechanisms, conformational selection (CS) and induced fit (IF). In this work, we used a combination of nudged elastic band (NEB), adaptive steered molecular dynamics (ASMD), and density functional theory (DFT, with a correction for dispersion) to study the dynamics of the pathways (IF/CS) by which two conformers of basket B(+) and B(-) interconvert and trap CX₄ guests (X = Cl and Br). While the results from NEB/DFT studies disclosed host-guest noncovalent contacts reducing the basket's conformational dynamics, ASMD methodology suggested an associative mechanism for the guest complexation. With theory in excellent agreement with experiments, NEB and ASMD emerge as the methods of choice for studying dynamics of supramolecular systems.

Adhesion behaviour of bulk supramolecular polymers via pillar[5]arene-based molecular recognition

Pillar[n]arenes were rarely used as the building blocks for supramolecular adhesives. Herein, pillar[5]arene-based supramolecular polymer materials with tough adhesion behaviours on different substrates were prepared, with adhesion strengths up to 4.75 MPa. Strong and long-term dichloromethane-resistant adhesion performances were successfully obtained.

A Porous Chalcogen-Bonded Organic Framework

The manner of bonding between constituent atoms or molecules invariably influences the properties of materials. Perhaps no material family is more emblematic of this than porous frameworks, wherein the namesake modes of connectivity give rise to discrete subclasses with unique collections of properties. However, established framework classes often display offsetting advantages and disadvantages for a given application. Thus, there exists no universally applicable material, and the discovery of alternative modes of framework connectivity is highly desirable. Here we show that chalcogen bonding, a subclass of σ-hole bonding, is a viable mode of connectivity in low-density porous frameworks. Crystallization studies with the triptycene tris(1,2,5-selenadiazole) molecular tecton reveal how chalcogen bonding can template high-energy lattice structures and how solvent conditions can be rationalized to obtain molecularly programmed porous chalcogen-bonded organic frameworks (ChOFs). These results provide the first evidence that σ-hole bonding can be used to advance the diversity of porous framework materials.

Versatile Polymer Nanocapsules via Redox Competition

Polymer nanocapsules have demonstrated significant value in materials science and biomedical technology, but require complicated and time-consuming synthetic steps. We report here the facile synthesis of monodisperse polymer nanocapsules via a redox-mediated kinetic strategy from two simple molecules: dopamine and benzene-1,4-dithiol (BDT). Specifically, BDT forms core templates and modulates the oxidation kinetics of dopamine into polydopamine (PDA) shells. These uniform nanoparticles can be tuned between ≈70 and 200 nm because the core diameter directly depends on BDT while the shell thickness depends on dopamine. The supramolecular core can then rapidly disassemble in organic solvents to produce PDA nanocapsules. Such nanocapsules exhibit enhanced physicochemical performance (e.g., loading capacity, photothermal transduction, and anti-oxidation) versus their solid counterparts. Particularly, this method enables a straightforward encapsulation of functional nanoparticles providing opportunities for designing complex nanostructures such as yolk-shell nanoparticles.

Stimuli-Responsive Supramolecular Polymers from Amphiphilic Phosphodiester-Linked Azobenzene Trimers

An amphiphilic phosphodiester‐linked azobenzene trimer has been exploited in the development of stimuli‐responsive, water‐soluble supramolecular polymers. The trimer can reversibly undergo thermal and photoisomerization between Z‐ and E‐isomers. Its self‐assembly properties in aqueous medium have been investigated by spectroscopic and microscopic techniques, demonstrating that E‐ and Z‐azobenzene trimers form supramolecular nanosheets and toroidal nanostructures, respectively. By virtue of the E/Z photoisomerization of the azobenzene units, the two different supramolecular morphologies can be switched by photoirradiation. The findings pave a way towards stimuli‐responsive, water‐soluble supramolecular polymers which hold great promise in the development of smart functional materials.

Elucidating the Supramolecular Copolymerization of N- and C-Centered Benzene-1,3,5-Tricarboxamides: The Role of Parallel and Antiparallel Packing of Amide Groups in the Copolymer Microstructure

An in‐depth study of the supramolecular copolymerization behavior of N‐ and C‐centered benzene‐1,3,5‐tricarboxamides (N‐ and C‐BTAs) has been conducted in methylcyclohexane and in the solid state. The connectivity of the amide groups in the BTAs differs, and mixing N‐ and C‐BTAs results in supramolecular copolymers with a blocky microstructure in solution. The blocky microstructure results from the formation of weaker and less organized, antiparallel hydrogen bonds between N‐ and C‐BTAs. In methylcyclohexane, the helical threefold hydrogen‐bonding network present in C‐ and N‐BTAs is retained in the mixtures. In the solid state, in contrast, the hydrogen bonds of pure BTAs as well as their mixtures organize in a sheet‐like pattern, and in the mixtures long‐range order is lost. Drop‐casting to kinetically trap the solution microstructures shows that C‐BTAs retain the helical hydrogen bonds, but N‐BTAs immediately adopt the sheet‐like pattern, a direct consequence of the lower stabilization energy of the helical hydrogen bonds. In the copolymers, the stability of the helical aggregates depends on the copolymer composition, and helical aggregates are only preserved when a high amount of C‐BTAs is present. The method outlined here is generally applicable to elucidate the copolymerization behavior of supramolecular monomers both in solution as well as in the solid state.

Reversible "On/Off" Chiral Amplification of Pillar[5]arene Assemblies by Dual External Stimuli

We report dual-stimuli, thermo- and photostimuli, responsive chiral assemblies, of planar-chiral pillar[5]arenes with azobenzene groups on their rims. The azobenzene-substituted planar-chiral pillar[5]arenes were synthesized by copper(I)-catalyzed alkyne-azide cycloaddition "click" reaction of azide-substituted planar-chiral pillar[5]arenes containing S or R stereogenic carbon atoms with an alkyne-substituted azobenzene. These decaazides with stereogenic carbons could act as starting points for a large library of planar-chiral pillar[5]arenes. Homeotropic alignment of azobenzenes, caused by the mesogenic property of the azobenzene groups, was induced by annealing a film of the azobenzene-substituted planar-chiral pillar[5]arenes. The alignment resulted in chiral propagation from the planar-chiral pillar[5]arene cores to the azobenzene area and caused significant chiral amplification consequently. These aligned chiral assemblies were collapsed by trans to cis photoisomerization of the azobenzene groups, resulting in chiral amplification off, and reconstructed by cis to trans thermo-isomerization, again turning on the chiral amplification.

Bottom-Up Approach for the Rational Loading of Linear Oligomers and Polymers with Lanthanides

The adducts between luminescent lanthanide tris(β-diketonate)s and diimine or triimine ligands have been explored exhaustively for their exceptional photophysical properties. Their formation, stability, and structures in solution, together with the design of extended metallopolymers exploiting these building blocks, remain, however, elusive. The systematic peripheral substitution of tridentate 2,6-bis(benzimidazol-2-yl)pyridine binding units (Lk = L1-L5), taken as building blocks for linear oligomers and polymers, allows a fine-tuning of their affinity toward neutral [Ln(hfa)₃] (hfa = hexafluoroacetylacetonate) lanthanide containers in the [LkLn(hfa)₃] adducts. Two trends emerge with (i) an unusual pronounced thermodynamic selectivity for midrange lanthanides (Ln = Eu) and (ii) an intriguing influence of remote peripheral substitutions of the benzimidazole rings on the affinity of the tridentate unit for [Ln(hfa)₃]. These trends are amplified upon the connection of several tridentate binding units via their benzimidazole rings to give linear segmental dimers (L6) and trimers (L7), which are considered as models for programming linear Wolf-Type II metallopollymers. Modulation of the affinity between the terminal and central binding units in the linear multitridentate ligands deciphers the global decrease of metal-ligand binding strengths with an increase in the length of the receptors (monomer → dimer → trimer → polymer). Application of the site binding model shed light onto the origin of the variation of the thermodynamic affinities: a prerequisite for the programmed loading of a polymer backbone with luminescent lanthanide β-diketonates. Analysis of the crystal structures for these adducts reveals delicate correlations between the chemical bond lengths measured in the solid state (or bond valence parameters) and the metal-ligand affinities operating in solution.

Distance Matters: Biasing Mechanism, Transfer of Asymmetry, and Stereomutation in N-Annulated Perylene Bisimide Supramolecular Polymers

The synthesis of two series of N-annulated perylene bisimides (PBIs), compounds 1 and 2, is reported, and their self-assembling features are thoroughly investigated by a complete set of spectroscopic measurements and theoretical calculations. The study corroborates the enormous influence that the distance between the PBI core and the peripheral groups exerts on the chiroptical properties and the supramolecular polymerization mechanism. Compounds 1, with the peripheral groups separated from the central PBI core by two methylenes and an ester group, form J-type supramolecular polymers in a cooperative manner but exhibit negligible chiroptical properties. The lack of clear helicity, due to the staircase arrangement of the self-assembling units in the aggregate, justifies these features. In contrast, attaching the peripheral groups directly to the N-annulated PBI core drastically changes the self-assembling properties of compounds 2, which form H-type aggregates following an isodesmic mechanism. These H-type aggregates show a strong aggregation-caused quenching (ACQ) effect that leads to nonemissive aggregates. Chiral (S)-2 and (R)-2 experience an efficient transfer of asymmetry to afford P- and M-type aggregates, respectively, although no amplification of asymmetry is achieved in majority rules or "sergeants-and-soldiers" experiments. A solvent-controlled stereomutation is observed for chiral (S)-2 and (R)-2, which form helical supramolecular polymers of different handedness depending on the solvent (methylcyclohexane or toluene). The stereomutation is accounted for by considering the two possible conformations of the terminal phenyl groups, eclipsed or staggered, which lead to linear or helical self-assemblies, respectively, with different relative stabilities depending on the solvent.

Benzene tricarboxamide derivatives with lipid and ethylene glycol chains self-assemble into distinct nanostructures driven by molecular packing

The self-assembly in aqueous solution of benzene-1,3,5-tricarboxamide (BTA) bearing one alkyl chain and two PEG (polyethylene glycol) chains or two alkyl chains and one PEG chain yields completely distinct nanostructures. Two series of derivatives were synthesized and extensively characterized and electron microscopy and small-angle X-ray scattering (SAXS) reveal micelle structures for derivatives with one alkyl and two PEG chains, but nanotapes and nanoribbons for the series with two alkyl and one PEG chain.

Molecular Engineering onto RuII Bis(1,2-diphenylphosphinoethane) Synthon: Toward an Original Organometallic Gelator

In this article, we report the successful molecular engineering of Ru bis-acetylides that led for the first time to a gelator and more specifically in aromatic solvents. By means of a nonlinear ligand and an extended aromatic platform, the bulky Ru bis-acetylides were able to self-assemble into lamellar structures as evidenced by scanning electron microscopy (SEM) in benzene, toluene, and o- and m-xylene, which in turn induced gelation of the solution with a critical gelation concentration of 30 mg/mL. Nuclear magnetic resonance (NMR), variable temperature (VT)-NMR, and Fourier transform infrared (FT-IR) spectroscopies evidenced that hydrogen bonds are mainly responsible for the self-organization. VT-NMR and small-angle X-ray scattering (SAXS) have also suggested that the pro-ligand and the complex stack in different ways.

Solvent Effects in Supramolecular Chemistry: Linear Free Energy Relationships for Common Intermolecular Interactions

The proper choice of solvent is of major importance for all studies in supramolecular chemistry, including molecular recognition in host-guest systems, intramolecular folding, self-assembly, and supramolecular polymerization. In this Perspective, the usefulness of linear free energy relationships (LFERs) is highlighted to unravel the effect of solvents on coordinate bonding (e.g., cation-crown ether), hydrogen bonding, halogen bonding, dipolar aggregation, and π-π-stacking. For all of these intermolecular interactions widely applied in supramolecular systems, LFER relationships between the Gibbs binding energies and common solvent polarity scales including E_T(30), π*, α or β based on solvatochromic dyes, scales derived from binding processes such as Gutmann donor and acceptor numbers or hydrogen bond donor and acceptor scales, or physical functions like the Kirkwood-Onsager or the Liptay-Onsager functions could be demonstrated. These relationships can now be applied toward a better understanding of the prevailing intermolecular forces for supramolecular interactions. They further enable a rational selection of the most suitable solvent for the preparation of self-assembled materials and the estimation of binding constants without the need for time-consuming comprehensive investigations of solvents.

Utilizing polymer-conjugate albumin-based ultrafine gas bubbles in combination with ultra-high frequency radiations in drug transportation and delivery

Ultrafine bubbles stabilized by human serum albumin conjugate polyethylene glycol ameliorates the stability of complex as well as the drug payload. Polyethylene glycol presents the crucial role in releasing drug by means of acoustic sound.

Insights into the co-assemblies formed by different aromatic short-peptide amphiphiles

The mechanism of co-assembly of different aromatic dipeptides has been studied using a combination of microscopy and spectroscopy techniques. At an equimolar ratio, the kinetics of the process is favored giving rise to alternate copolymers.