Defective MOF-74 with ancillary open metal sites for the enhanced adsorption of chemical warfare agent simulants

The development of effective porous adsorbents plays a vital role in eliminating hazardous substances from the environment. Toxic chemicals, including chemical warfare agents (CWAs), pose significant risks to both humans and ecosystems, highlighting the urgency to create efficient porous adsorbents. Therefore, substantial attention has been directed towards advancing adsorption techniques for the successful eradication of CWAs from the environment. Herein, we demonstrate a rational approach for enhancing the adsorption capability of a porous metal-organic framework (MOF) by employing ancillary open metal sites within the MOF structure. To generate defective MOF-74 (D-MOF-74) with ancillary open metal sites, some of the 2,5-dihydroxy-1,4-bezenedicarboxylic acid (DHBDC) linkers originally present in the MOF-74 structure were replaced with 1,4-benzenedicarboxylic acid (BDC) linkers. The absence of hydroxyl groups in the BDC linkers compared to the original DHBDC linkers creates ancillary open metal sites, which enhance the adsorption ability of D-MOF-74 for CWA simulants such as dimethyl methyl phosphonate, 2-chloroethyl ethyl sulfide, and methyl salicylate by providing effective interaction sites for the targeted molecules. However, excessive creation of open metal sites causes the collapse of the originally well-developed MOF-74 structure, resulting in a substantial reduction in its empty space and a subsequent decline in adsorption efficiency. Thus, to produce a defective MOF with the best performance, it is necessary to replace an appropriate amount of organic linker and create suitable open metal sites. Moreover, D-MOF-74 displays excellent recyclability during consecutive adsorption cycles without losing its original structure and morphology, suggesting that D-MOF-74 is an effective and stable material for the removal of CWA simulants.

MFM-300(Sc): a chemically stable Sc(III)-based MOF material for multiple applications

Developing robust multifunctional metal-organic frameworks (MOFs) is the key to advancing the further deployment of MOFs into relevant applications. Since the first report of MFM-300(Sc) (MFM = Manchester Framework Material, formerly known as NOTT-400), the development of applications of this robust microporous MOF has only grown. In this review, a summary of the applications of MFM-300(Sc), as well as some emerging advanced applications, have been discussed. The adsorption properties of MFM-300(Sc) are presented systematically. Particularly, this contribution is focused on acid and corrosive gas adsorption. In addition, recent applications for catalysis based on the outstanding hemilabile Sc-O bond character are highlighted. Finally, some new research areas are introduced, such as host-guest chemistry and biomedical applications. This highlight aims to showcase the recent advances and the potential for developing new applications of this promising material.

Multifunctional Roles of Dihydrotetrazine-Decorated Zr-MOFs in Photoluminescence and Colorimetrism for Discrimination of Arsenate and Phosphate Ions in Water

The high chemical and structural stabilities of zirconium (Zr)-based metal-organic frameworks (MOFs) in aquatic media make them ideal candidates for wastewater treatment. Rational decoration or Zr-MOFs with functional groups can significantly extend their application in this area. In this work, two well-known Zr-MOFs, UiO-66 and MIL-140-A, were functionalized with dihydrotetrazine function to increase their capability in water treatment. Investigations reveal that these two dihydrotetrazine (DHTZ)-functionalized MOFs, namely UiO-66(Zr)-DHTZ and MIL-140(Zr)-DHTZ, can be applied as a two-component array for highly selective and sensitive discrimination of arsenate (AsO43-) and phosphate (PO43-) ions in water in the presence of other anions. Photoluminescence (PL) tests using UiO-66(Zr)-DHTZ show that this MOF can detect these two anions via a ratiometric response, 1.74 for arsenate and 1.84 for phosphate at 2 μM, with superior detection limits (7.2 × 10-8 M for AsO43- and 4.3 × 10-8 M for PO43-). The ratiometric PL response of UiO-66(Zr)-DHTZ toward arsenate and phosphate anions arises possibly from the arsenate-dihydrotetrazine hydrogen bonding. In the next step, colorimetric tests using MIL-140(Zr)-DHTZ were conducted to discriminate the arsenate from phosphate with a very low detection limit at nanomolar level. This MOF undergoes a yellow-to-pink color change in the presence of arsenate ions, while no color change is observed in the presence of phosphate. This color change is observed through conversion of dihydrotetrazine sites inside the pores of MIL-140(Zr)-DHTZ into tetrazine. Altogether, the PL response of UiO-66(Zr)-DHTZ is originated from the hydrogen bond-donating/accepting character of DHTZ function, while the colorimetric response of MIL-140(Zr)-DHTZ is based on the chemical conversion of DHTZ function. This work clearly shows that the decoration of Zr-based MOFs with multicharacter functional groups can develop their application in wastewater treatment as multipurpose platforms.

Recent progress in high-performance environmental impacts of the removal of radionuclides from wastewater based on metal-organic frameworks: a review

The nuclear industry is rapidly developing and the effective management of nuclear waste and monitoring the nuclear fuel cycle are crucial. The presence of various radionuclides such as uranium (U), europium (Eu), technetium (Tc), iodine (I), thorium (Th), cesium (Cs), and strontium (Sr) in the environment is a major concern, and the development of materials with high adsorption capacity and selectivity is essential for their effective removal. Metal-organic frameworks (MOFs) have recently emerged as promising materials for removing radioactive elements from water resources due to their unique properties such as tunable pore size, high surface area, and chemical structure. This review provides an extensive analysis of the potential of MOFs as adsorbents for purifying various radionuclides rather than using different techniques such as precipitation, filtration, ion exchange, electrolysis, solvent extraction, and flotation. This review discusses various MOF fabrication methods, focusing on minimizing environmental impacts when using organic solvents and solvent-free methods, and covers the mechanism of MOF adsorption towards radionuclides, including macroscopic and microscopic views. It also examines the effectiveness of MOFs in removing radionuclides from wastewater, their behavior on exposure to high radiation, and their renewability and reusability. We conclude by emphasizing the need for further research to optimize the performance of MOFs and expand their use in real-world applications. Overall, this review provides valuable insights into the potential of MOFs as efficient and durable materials for removing radioactive elements from water resources, addressing a critical issue in the nuclear industry.

Acetate exchange mechanism on a Zr12 oxo hydroxo cluster: relevance for reshaping Zr-carboxylate coordination adaptable networks

The kinetics and mechanism of the acetate ligand exchange with free acetic acid in [Zr6O4(OH)4(O2CCH3)12]2, used as a molecular model of crosslink migration in [Zr6O4(OH)4(carboxylate)12-n(OH)n]-based coordination adaptable networks with vitrimer-like properties, has been thoroughly investigated by dynamic 1H NMR and DFT calculations. The compound maintains its C2h-symmetric Zr12 structure in CD2Cl2 and C6D6, while it splits into its Zr6 subunits in CD3OD and D2O. In the Zr12 structure, the topologically different acetates (3 chelating, 6 belt-bridging, 2 intercluster-bridging and 1 inner-face-bridging) of the Zr6 subunits behave differently in the presence of free CH3COOH: very fast exchange for the chelating (coalesced resonance at room temperature), slower exchange for the belt-bridging (line broadening upon warming), no observable exchange up to 65 °C (by EXSY NMR) for the intercluster- and inner-face-bridging. The rates of the first two exchange processes have zero-order dependence on [CH3COOH]. Variable-temperature line broadening studies yielded ΔH‡ = 15.0 ± 0.4 kcal mol-1, ΔS‡ = 8 ± 1 cal mol-1 K-1 (-30 to +25 °C range in CD2Cl2) for the chelating acetates and ΔH‡ = 22.7 ± 1.6, 22.9 ± 2.1 and 20.6 ± 1.0 kcal mol-1 and ΔS‡ = 13 ± 5, 14 ± 6 and 9 ± 3 cal mol-1 K-1, respectively (+25 to +70 °C range in C6D6), for three distinct resonances of magnetically inequivalent belt-bridging acetates. With support of DFT calculations, these results point to an operationally associative mechanism involving a rate-determining partial dissociation to monodentate acetate, followed by rapid acid coordination and proton transfer. The cluster μ3-OH ligands accelerate the exchange processes through H-bonding stabilization of the coordinatively unsaturated intermediate. The lower exchange barrier for the chelated vs. bridging acetates is associated to the release of ring strain. The results presented in this investigation may help the interpretation of carboxylate exchange phenomena in other systems and the design of new carboxylate-based materials.

In-situ preparation of sulfonated carbonaceous copper oxide-zirconia nanocomposite as a novel and recyclable solid acid catalyst for reduction of 4-nitrophenol

The missing-linker defects of UiO-66 were exploited to covalently anchor Cu nanoclusters (Cu/UiO-66). The molecular interactions between the metals and oxides as copper-zirconia interfaces in Cu/UiO-66 are essential for heterogeneous catalysis, leading to remarkable synergistic impacts on activity and selectivity. Homogeneously distributed carbonaceous mixed metal oxides (CuO/ZrO₂@C) nanocomposite was prepared via carbonization of the Cu/UiO-66 at 600 °C for 3 h in air. To enhance the acidity properties of the CuO/ZrO₂@C nanocomposite, a small amount of sulfuric acid was added and heated at 150 °C under an N₂ atmosphere (CuO/ZrO₂-SO₃H@C). The synthesised Cu/UiO-66 and CuO/ZrO₂-SO₃H@C catalysts were used as novel catalysts in the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The Cu/UiO-66 and CuO/ZrO₂-SO₃H@C catalysts displayed complete conversion of the 4-NP solution during (4 and 2 min) stirring at room temperature, respectively. These two catalysts exhibited a high reduction rate of 8.61 × 10^-3 s^-1, and 18.3 × 10^-3 s^-1, respectively. The X-ray photoelectron spectroscopic (XPS) analysis showed the charge of copper atoms in the Cu/UiO-66 catalyst was Cu⁰/Cu^II and in the CuO/ZrO₂-SO₃H@C catalyst was Cu^I/Cu^II with nearly the same ratio (65/35). The particle size and the elemental composition of the CuO/ZrO₂-SO₃H@C catalyst were analysed by using high resolution transmission electron microscopy (HR-TEM), and energy-dispersive X-ray spectroscopy (EDS), and elemental mapping, respectively. The key point beyond the high catalytic activity and selectivity of the CuO/ZrO₂-SO₃H@C catalyst is both the carbon-metal oxides heterojunction structure that leads to good dispersion of the CuO and ZrO₂ over the carbon sheets, and the high acidity properties that come from the combination between the Brønsted acid sites from sulfuric acid and Lewis acid sites from the UiO-66. The catalysts exhibited good recyclability efficiency without significant loss in activity, indicating their good potential for industrial applications.

High-Concentration Self-Assembly of Zirconium- and Hafnium-Based Metal-Organic Materials

Metal-organic frameworks (MOFs) are crystalline, porous solids constructed from organic linkers and inorganic nodes that are promising for applications in chemical separations, gas storage, and catalysis, among many others. However, a major roadblock to the widespread implementation of MOFs, including highly tunable and hydrolytically stable Zr- and Hf-based frameworks, is their benchtop-scalable synthesis, as MOFs are typically prepared under highly dilute (≤0.01 M) solvothermal conditions. This necessitates the use of liters of organic solvent to prepare only a few grams of MOF. Herein, we demonstrate that Zr- and Hf-based frameworks (eight examples) can self-assemble at much higher reaction concentrations than are typically utilized, up to 1.00 M in many cases. Combining stoichiometric amounts of Zr or Hf precursors with organic linkers at high concentrations yields highly crystalline and porous MOFs, as confirmed by powder X-ray diffraction (PXRD) and 77 K N2 surface area measurements. Furthermore, the use of well-defined pivalate-capped cluster precursors avoids the formation of ordered defects and impurities that arise from standard metal chloride salts. These clusters also introduce pivalate defects that increase the exterior hydrophobicity of several MOFs, as confirmed by water contact angle measurements. Overall, our findings challenge the standard assumption that MOFs must be prepared under highly dilute solvothermal conditions for optimal results, paving the way for their scalable and user-friendly synthesis in the laboratory.

Survival of Zirconium-Based Metal-Organic Framework Crystallinity at Extreme Pressures

Recent research on metal-organic frameworks (MOFs) has shown a shift from considering only the crystalline high-porosity phases to exploring their amorphous counterparts. Applying pressure to a crystalline MOF is a common method of amorphization, as MOFs contain large void spaces that can collapse, reducing the accessible surface area. This can be either a desired change or indeed an unwanted side effect of the application of pressure. In either case, understanding the MOF's pressure response is extremely important. Three such MOFs with varying pore sizes (UiO-66, MOF-808, and NU-1000) were investigated using in situ high-pressure X-ray diffraction and Raman spectroscopy. Partial crystallinity was observed in all three MOFs above 10 GPa, along with some recovery of crystallinity on return to ambient conditions if the frameworks were not compressed above thresholds of 13.3, 14.2, and 12.3 GPa for UiO-66, MOF-808, and NU-1000, respectively. This threshold was marked by an unexpected increase in one or more lattice parameters with pressure in all MOFs. Comparison of compressibility between MOFs suggests penetration of the pressure-transmitting oil into MOF-808 and NU-1000. The survival of some crystallinity above 10 GPa in all of these MOFs despite their differing pore sizes and extents of oil penetration demonstrates the importance of high-pressure characterization of known structures.

Core-Shell Nanostructured Drug Delivery Platform Based on Biocompatible Metal-Organic Framework-Ligated Polyethyleneimine for Targeted Hepatocellular Carcinoma Therapy

Multifunctional nanosized metal-organic frameworks (NMOFs) have advanced rapidly over the past decade to develop drug delivery systems (DDSs). These material systems still lack precise and selective cellular targeting, as well as the fast release of the quantity of drugs that are simply adsorbed within and on the external surface of nanocarriers, which hinders their application in the drug delivery. Herein, we designed a biocompatible Zr-based NMOF with an engineered core and the hepatic tumor-targeting ligand, glycyrrhetinic acid grafted to polyethyleneimine (PEI) as the shell. The improved core-shell serves as a superior nanoplatform for efficient controlled and active delivery of the anticancer drug doxorubicin (DOX) against hepatic cancer cells (HepG2 cells). In addition to their high loading capacity of 23%, the developed nanostructure DOX@NMOF-PEI-GA showed an acidic pH-stimulated response and extended the drug release time to 9 days as well as enhanced the selectivity toward the tumor cells. Interestingly, the DOX-free nanostructures showed a minimal toxic effect on both normal human skin fibroblast (HSF) and hepatic cancer cell line (HepG2), but the DOX-loaded nanostructures exhibited a superior killing effect toward the hepatic tumor, thus opening the way for the active drug delivery and achieving efficient cancer therapy applications.

Efficient adsorption and photocatalytic degradation of water emerging contaminants through nanoarchitectonics of pore sizes and optical properties of zirconium-based MOFs

Over the past decades, the presence of pharmaceutical emerging contaminants in water bodies is receiving increasing attention due to the high concentration detected from wastewater effluent. Water systems contain a wide range of components coexisting together, which increases the difficulty of removing pollutants from the water. In order to achieve selective photodegradation and to enhance the photocatalytic activity of the photocatalyst on emerging contaminants, a Zr-based metal-organic framework (MOF), termed VNU-1 (VNU represents Vietnam National University) constructed with ditopic linker 1,4-bis(2-[4-carboxyphenyl]ethynyl)benzene (H₂CPEB), with enlarged pore size and ameliorated optical properties, was synthesized and applied in this study. When compared to UiO-66 MOFs, which only had 30% photodegradation of sulfamethoxazole, VNU-1 had 7.5 times higher adsorption and reached 100% photodegradation in 10 min. The tailored pore size of VNU-1 resulted in size-selective properties between small-molecule antibiotics and big-molecule humic acid, and VNU-1 maintained high photodegradation performance after 5 cycles. Based on the toxicity test and the scavenger test, the products after photodegradation had no toxic effect on V. fischeri bacteria, and the superoxide radical (·O₂^-) and holes (h⁺) generated from VNU-1 dominated the photodegradation reaction. These results demonstrate that VNU-1 is a promising photocatalyst and provide a new insight for developing MOF photocatalyst to remove emerging contaminants in the wastewater systems.

Monolithic Zirconium-Based Metal-Organic Frameworks for Energy-Efficient Water Adsorption Applications

Space cooling and heating, ventilation, and air conditioning (HVAC) accounts for roughly 10% of global electricity use and are responsible for ca. 1.13 gigatonnes of CO₂ emissions annually. Adsorbent-based HVAC technologies have long been touted as an energy-efficient alternative to traditional refrigeration systems. However, thus far, no suitable adsorbents have been developed which overcome the drawbacks associated with traditional sorbent materials such as silica gels and zeolites. Metal-organic frameworks (MOFs) offer order-of-magnitude improvements in water adsorption and regeneration energy requirements. However, the deployment of MOFs in HVAC applications has been hampered by issues related to MOF powder processing. Herein, three high-density, shaped, monolithic MOFs (UiO-66, UiO-66-NH₂ , and Zr-fumarate) with exceptional volumetric gas/vapor uptake are developed-solving previous issues in MOF-HVAC deployment. The monolithic structures across the mesoporous range are visualized using small-angle X-ray scattering and lattice-gas models, giving accurate predictions of adsorption characteristics of the monolithic materials. It is also demonstrated that a fragile MOF such as Zr-fumarate can be synthesized in monolithic form with a bulk density of 0.76 gcm^-3 without losing any adsorption performance, having a coefficient of performance (COP) of 0.71 with a low regeneration temperature (≤ 100 °C).

UiO-66 derived ZrO2@C catalysts for the double-bond isomerization reaction of 2-butene

1-Butene, as one of the widely used chemical raw materials, can be produced by the double bond isomerization of 2-butene. However, the current yield of the isomerization reaction is only up to 20% or so. It is therefore an urgent issue to develop novel catalysts with higher performances. In this work, a high-activity ZrO₂@C catalyst that is derived from UiO-66(Zr) is fabricated. The catalyst is prepared by calcining the precursor UiO-66(Zr) at high temperature in nitrogen, and characterized by XRD, TG, BET, SEM/TEM, XPS and NH₃-TPD. The results demonstrate that the calcination temperature has significant influences on the catalyst structure and performance. Regarding the catalyst ZrO₂@C-500, the selectivity and yield of 1-butene are 94.0% and 35.1%, respectively. The high performance is due to multiple aspects, including the inherited octahedral morphology from parent UiO-66(Zr), suitable medium-strong acidic active sites and high surface area. The present work will lead to a better understanding of the ZrO₂@C catalyst and guide the rational design of high-activity catalysts for the double bond isomerization of 2-butene to 1-butene.

Modeling and spectroscopic investigation of U(VI) removal on porous amidoxime-functionalized metal organic framework derived from macromolecular carbohydrate

The investigation of interaction mechanism of U(VI) selective removal on amidoxime-functionalized metal organic framework (i.e., UiO-66(Zr)-AO) derived from macromolecular carbohydrate is conducive to apply metal organic frameworks in actual environmental remediation. The batch experiments showed that UiO-66(Zr)-AO displayed the fast removal rate (equilibrium time of 0.5 h), high adsorption capacity (384.6 mg/g), excellent regeneration performance (<10 % decrease after three cycles) towards U(VI) removal due to the unprecedented chemical stability, large surface area and simple fabrication. U(VI) removal at different pH can be satisfactorily fitted by diffuse layer modeling with cation exchange at low pH and an inner-sphere surface complexation at high pH. The inner-sphere surface complexation was further demonstrated by X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analysis. These findings revealed that UiO-66(Zr)-AO can be an effective adsorbent to remove the radionuclides from aqueous solution, which is crucial for recycling of uranium resource and decreasing the uranium harm to the environment.

Effect of Functional Groups on Low-Concentration Carbon Dioxide Capture in -Type Metal-Organic Frameworks

The selective capture of low-concentration CO₂ from air or confined spaces remains a great challenge. In this study, various functional groups were introduced into UiO-66 to generate functionalized derivatives (UiO-66-R, R = NO₂, NH₂, OH, and CH₃), aiming at significantly enhancing CO₂ adsorption and separation efficiency. More significantly, UiO-66-NO₂ and UiO-66-NH₂ with high polarity exhibit exceptional CO₂ affinity and optimal separation characteristics in mixed CO₂/O₂/N₂ (1:21:78). In addition, the impressive stability of UiO-66-NO₂ and UiO-66-NH₂ endows them with excellent recycling stability. The effective adsorption and separation performances demonstrated by these two functional materials suggest their potential as promising physical adsorbents for capturing low-concentration CO₂.

A Metal-Organic Framework Based Quasi-Solid-State Electrolyte Enabling Continuous Ion Transport for High-Safety and High-Energy-Density Lithium Metal Batteries

Solid-state lithium metal batteries are promising next-generation rechargeable energy storage systems. However, the poor compatibility of the electrode/electrolyte interface and the low lithium ion conductivity of solid-state electrolytes are key issues hindering the practicality of solid-state electrolytes. Herein, rational designed metal-organic frameworks (MOFs) with the incorporation of two types of ionic liquids (ILs) are fabricated as quasi-solid electrolytes. The obtained MOF-IL electrolytes offer continuous ion transport channels with the functional sulfonic acid groups serving as lithium ion hopping sites, which accelerate the Li⁺ transport both in the bulk and at the interfaces. The quasi-solid MOF-IL electrolytes exhibit competitive ionic conductivities of over 3.0 × 10^-4 S cm^-1 at room temperature, wide electrochemical windows over 5.2 V, and good interfacial compatibility, together with greatly enhanced Li⁺ transference numbers compared to the bare IL electrolyte. Consequently, the assembled quasi-solid Li metal batteries show either superior stability at low C rates or improved rate performance, related to the species of ILs. Overall, the quasi-solid MOF-IL electrolytes possess great application potential in high-safety and high-energy-density lithium metal batteries.

Palladium Nanoparticle-Decorated Porous Metal-Organic-Framework (Zr)@Guanidine: Novel Efficient Catalyst in Cross-Coupling (Suzuki, Heck, and Sonogashira) Reactions and Carbonylative Sonogashira under Mild Conditions

A novel heterogeneous Zr-based metal-organic framework containing an amino group functionalized with nitrogen-rich organic ligand (guanidine), through a step-by-step post synthesis modification approach, was successfully modified by the stabilization of palladium metal nanoparticles on the prepared UiO-66-NH₂ support in order to synthesize the Suzuki-Murray, Mizoroki-Heck, and copper-free Sonogashira reactions and also the carbonylative Sonogashira reaction incorporating H₂O as a green solvent under mild conditions. This newly synthesized highly efficient and reusable UiO-66-NH₂@cyanuric chloride@guanidine/Pd-NPs reported catalyst has been utilized to increase anchoring palladium onto the substrate with the aim of altering the construction of the intended synthesis catalyst to form the C-C coupling derivatives. Several strategies, including X-ray diffraction, Fourier transform infrared, scanning electron microscopy, Brunauer-Emmett-Teller, transmission microscopy electron, thermogravimetric analysis, inductively coupled plasma, energy-dispersive X-ray, and elemental mapping analyzes, were used to indicate the successful preparation of the UiO-66-NH₂@cyanuric chloride@guanidine/Pd-NPs. In these reactions, the UiO-66-NH₂-supported Pd-NPs illustrated superior performances compared to their catalyst, revealing the benefits of providing nanocatalysts. As a result, the proposed catalyst is favorable in a green solvent, and also, the outputs are accomplished with good to excellent outputs. Furthermore, the suggested catalyst represented very good reusability with no remarkable loss in activity up nine sequential runs.

Effect of a Zr-Based Metal-Organic Framework Structure on the Properties of Its Composite with Polyaniline

Composites of polyaniline (PANI) and Zr-based metal-organic frameworks (MOFs), UiO-66 and UiO-66-NH₂, were synthesized by the oxidative polymerization of aniline in the presence of MOF templates with the MOF content in the resulting materials (78.2 and 86.7 wt %, respectively) close to the theoretical value (91.5 wt %). Scanning electron microscopy and transmission electron microscopy showed that the morphology of the composites was set by the morphology of the MOFs, whose structure was mostly preserved after the synthesis, based on the X-ray diffraction data. Vibrational and NMR spectroscopies pointed out that MOFs participate in the protonation of PANI and conducting polymer chains were grafted to amino groups of UiO-66-NH₂. Unlike PANI-UiO-66, cyclic voltammograms of PANI-UiO-66-NH₂ showed a well-resolved redox peak at around ≈0 V, pointing at the pseudocapacitive behavior. The gravimetric capacitance of PANI-UiO-66-NH₂, normalized per mass of the active material, was also found to be higher compared to that of pristine PANI (79.8 and 50.5 F g^-1, respectively, at 5 mV s^-1). The introduction of MOFs into the composites with PANI significantly improved the cycling stability of the materials over 1000 cycles compared to the pristine conducting polymer, with the residual gravimetric capacitance being ≥100 and 77%, respectively. Thus, the electrochemical performance of the prepared PANI-MOF composites makes them attractive materials for application in energy storage.

UiO66-Derived Catalyst for Low Temperature Catalytic Reduction of NO with NH3

Diesel exhaust emissions are major outdoor air pollutants. Reducing the emission of NOx by diesel commercial vehicles and related machineries is at present a great challenge. In this study, we synthesize a catalyst for low-temperature catalytic reduction of NO using calcinated UiO-66(Zr) as a host for the doping of cerium, manganese, and titanium by the incipient wetness impregnation, followed by the dispersion of 1.0 wt % platinum. A solid solution of Ce_0.15Zr_0.54Mn_0.11Ti_0.20O₂/1.0Pt (CZMTO/Pt) is synthesized as evident by the structural characterizations. The catalyst demonstrates significant NO reduction in the laboratory due to the synergistic effect of various elements, with NO conversion above 80% at 160 °C.

CuCo Nanoparticle, Pd(II), and l-Proline Trifunctionalized UiO-67 Catalyst for Three-Step Sequential Asymmetric Reactions

Metal-organic frameworks (MOFs) have become a promising support for different active sites to construct multifunctional and heterogeneous catalysts. However, the related investigation mainly focuses on introducing one or two active sites into MOFs and trifunctional catalysts have been very rarely reported. Herein, non-noble CuCo alloy nanoparticles, Pd²⁺, and l-proline, as encapsulated active species, functional organic linkers, and active metal nodes, respectively, were successfully decorated to UiO-67 to construct a chiral trifunctional catalyst by the one-step method, which was further applied to asymmetric three-step sequential oxidation of aromatic alcohols/Suzuki coupling/asymmetric aldol reactions with excellent oxidation and coupling performance (yields up to 95 and 96%, respectively), as well as good enantioselectivities (ee_anti value up to 73%) in asymmetric aldol reactions. The heterogeneous catalyst can be reused at least five times without obvious deactivation due to the strong interaction between the MOFs and the active sites. This work provides an effective strategy to construct multifunctional catalysts via the introduction and combination of three or more of active sites, including encapsulated active species, functional organic linkers, and active metal nodes, into stable MOFs.

Recent advances in Metal-Organic Frameworks as nanocarriers for triggered release of anticancer drugs: Brief history, biomedical applications, challenges and future perspective

Metal-Organic Frameworks (MOFs) have emerged as a promising biomedical material due to its unique features such as high surface area, pore volume, variable pore size, flexible functional groups, and excellent efficiency for drug loading. In this review, we explored the use of novel and smart metal organic frameworks as drug delivery vehicles to discover a safer and more controlled mode of drug release aiming to minimize their side effects. Here, we systematically discussed the background of MOFs following a thorough review on structural and physical properties of MOFs, their synthesis techniques, and the important characteristics to establish a strong foundation for future research. Furthermore, the current status on the potential applications of MOF-based stimuli-responsive drug delivery systems, including pH-, ion-, temperature-, light-, and multiple responsive systems for the delivery of anticancer drugs has also been presented. Lastly, we discuss the prospects and challenges in implementation of MOF-based materials in the drug delivery. Therefore, this review will help researchers working in the relevant fields to enhance their understanding of MOFs for encapsulation of various drugs as well as their stimuli responsive mechanism.

Metal-organic frameworks as promising solid-phase sorbents for the isolation of third-generation synthetic cannabinoids in biological samples

In this work, metal-organic frameworks (MOFs) were used for the first time as solid-phase extraction (SPE) sorbents for the isolation of synthetic cannabinoids (SCs) from oral fluids and subsequently quantified by LC-fluorescence detection (FLD). In this context, different MOF families were synthesized and tested under SPE mode. UiO-66 was the family selected, being the amino functionalized (NH₂-UiO-66) the best candidate in terms of extraction performance. After the method optimization, several analytical parameters of interest were obtained, reaching limits of detection (LODs) as low as 0.6-0.8 μg L^-1 and precision values (expressed as RSD) lower than 10.6%. The developed method was successfully applied to the determination of 8 SCs in different oral fluids at three spiked levels with recoveries between 67 and 114%. This method claims to be a real alternative for screening purposes, being a cost-effective procedure due to the price of the sorbent (<0.5 €/cartridge) and its recyclability (up to 12 uses), among others good features.

Radiolytic Water Splitting Sensitized by Nanoscale Metal-Organic Frameworks

High-energy radiation that is compatible with renewable energy sources enables direct H₂ production from water for fuels; however, the challenge is to convert it as efficiently as possible, and the existing strategies have limited success. Herein, we report the use of Zr/Hf-based nanoscale UiO-66 metal-organic frameworks as highly effective and stable radiation sensitizers for purified and natural water splitting under γ-ray irradiation. Scavenging and pulse radiolysis experiments with Monte Carlo simulations show that the combination of 3D arrays of ultrasmall metal-oxo clusters and high porosity affords unprecedented effective scattering between secondary electrons and confined water, generating increased precursors of solvated electrons and excited states of water, which are the main species responsible for H₂ production enhancement. The use of a small quantity (<80 mmol/L) of UiO-66-Hf-OH can achieve a γ-rays-to-hydrogen conversion efficiency exceeding 10% that significantly outperforms Zr-/Hf-oxide nanoparticles and the existing radiolytic H₂ promoters. Our work highlights the feasibility and merit of MOF-assisted radiolytic water splitting and promises a competitive method for creating a green H₂ economy.

Nanosized metal-organic frameworks as unique platforms for bioapplications

Metal-organic frameworks (MOFs) are extremely versatile materials, which serve to create platforms with exceptional porosity and specific reactivities. The production of MOFs at the nanoscale (NMOFs) offers the possibility of creating innovative materials for bioapplications as long as they maintain the properties of their larger counterparts. Due to their inherent chemical versatility, synthetic methods to produce them at the nanoscale can be combined with inorganic nanoparticles (NPs) to create nanocomposites (NCs) with one-of-a-kind features. These systems can be remotely controlled and can catalyze abiotic reactions in living cells, which have the potential to stimulate further research on these nanocomposites as tools for advanced therapies.

Surface Modification of UiO-66 on Hollow Fibre Membrane for Membrane Distillation

The hydrophobicity of metal-organic frameworks (MOFs) is critical in enhancing the separation process in membrane distillation. Herein, a new superhydrophobic University of Oslo 66 (UiO-66) MOFs was successfully constructed on the top of alumina hollow fibre (AHF) membrane for desalination purposes. The fabrication methodology of the membrane involved in situ growth of pure crystalline UiO-66 on top of AHF and post-synthetic modification by fluorosilane grafting. The resultant membrane was characterised to study the physicochemical properties of the pristine and modified membrane. A superhydrophobic UiO-66 with a contact angle of 163.6° and high liquid entry pressure was obtained by introducing a highly branched fluorocarbon chain while maintaining its crystallinity. As a result, the modified membrane achieved 14.95 L/m²∙h water flux and 99.9% NaCl rejection with low energy consumption in the direct contact membrane distillation process. Furthermore, the high surface energy contributed by UiO-66 is maximised to produce the maximum number of accessible sites for the grafting process. The synergistic effect of surface hydrophobicity and porous UiO-66 membrane in trapping water vapour shows great potential for desalination application.

Polymer Membranes of Zeolitic Imidazole Framework-8 with Sodium Alginate Synthesized from ZIF-8 and Their Application in Light Gas Separation

The potential of nanocomposite membranes (NCMs) prepared by the sodium alginate polymer and embedded with synthesized zeolitic imidazole framework-8 (ZIF-8) as fillers having microporous structure in the application of separation of gaseous mixture generated by the process of methane reforming was assessed. ZIF-8 crystals were created through hydrothermal synthesis, with sizes varying from 50 to 70 nm. NCMs were prepared with a 15% filler loading, i.e., synthesized ZIF-8. NCMs (ZIF-8) having H₂ permeability of 28 Barrer and H₂/CH₄ selectivity of 125 outperformed neat polymer membranes in terms of separation performance at ambient temperature and 4 kg/cm² pressure. The purity of H₂ increased to as high as 95% among the measured values. The NCMs did not, however, outperform a neat polymer membrane in terms of their ability to separate mixtures of gases. Moreover, the combination of ZIF-8 as a filler with sodium alginate was new and had not been reported previously. As a result, it is worthwhile to investigate.

Surface-Functionalized Metal-Organic Frameworks for Binding Coronavirus Proteins

Since the outbreak of SARS-CoV-2, a multitude of strategies have been explored for the means of protection and shielding against virus particles: filtration equipment (PPE) has been widely used in daily life. In this work, we explore another approach in the form of deactivating coronavirus particles through selective binding onto the surface of metal-organic frameworks (MOFs) to further the fight against the transmission of respiratory viruses. MOFs are attractive materials in this regard, as their rich pore and surface chemistry can easily be modified on demand. The surfaces of three MOFs, UiO-66(Zr), UiO-66-NH2(Zr), and UiO-66-NO2(Zr), have been functionalized with repurposed antiviral agents, namely, folic acid, nystatin, and tenofovir, to enable specific interactions with the external spike protein of the SARS virus. Protein binding studies revealed that this surface modification significantly improved the binding affinity toward glycosylated and non-glycosylated proteins for all three MOFs. Additionally, the pores for the surface-functionalized MOFs can adsorb water, making them suitable for locally dehydrating microbial aerosols. Our findings highlight the immense potential of MOFs in deactivating respiratory coronaviruses to be better equipped to fight future pandemics.

Size-Dependent Thermal Shifts to MOF Nanocrystal Optical Gaps Induced by Dynamic Bonding

Conventional semiconductor nanocrystals exhibit wide-ranging optical behavior, whereas the size-dependent photophysical properties of metal-organic framework (MOF) nanocrystals remain an open research frontier. Here, we present size- and temperature-dependent optical absorption spectra of common MOFs with particle sizes ranging from tens of nanometers to several micrometers. All materials exhibit optical gaps that decrease at elevated temperatures, which we attribute to the dynamic nature of MOF metal-linker bonds. Accordingly, whereas the labile titanium-carboxylate bonds of MIL-125 give rise to bandgaps that red-shift by ∼600 meV over 300 K, the more rigid zinc-imidazolate bonds of ZIF-8 produce a red-shift of only ∼10 meV. Furthermore, smaller particles induce far larger decreases to optical gaps. Taken together, these results suggest MOF bonding becomes more flexible with smaller nanocrystal sizes, offering a powerful tool for manipulating optical behavior through composition, temperature, and dimensionality.

Degradation of contaminants of emerging concern in a secondary effluent using synthesized MOF-derived photoanodes: A comparative study between photo-, electro- and photoelectrocatalysis

Three metal-organic framework (MOF)-based photoanodes were prepared by deposition on TiO₂ nanotubes using Ti as substrate (Ti/TiO₂NT): i) Ti/TiO₂NT-Au@ZIF-8, ii) Ti/TiO₂NT-Ru₃(BTC)₂, iii) Ti/TiO₂NT-UiO-66(Zr)NH₂. These photoanodes were characterized by FEG-SEM, EDX and DRX. The analyses showed a successful modification and a high homogeneity of the different MOFs on the Ti/TiO₂NT surface. The photoanodes were studied in the degradation of Contaminants of Emerging Concern (CECs) in a spiked secondary effluent from a Municipal Wastewater Treatment Plant (MWWTP). Sodium diclofenac (DCF), sulfamethazine (SMT) and carbamazepine (CBZ) were used as CECs at low concentration (200 μg/L each CEC). The samples were preconcentrated using Solid Phase Extraction (SPE) and analyzed by a HPLC-DAD system. The MOF-based photoanodes exhibited a high photoelectrochemical (PEC) activity towards the oxidation of CECs, achieving up to 50%, 70% and 80% of removal using Ti/TiO₂NT-Au@ZIF-8, Ti/TiO₂NT-UiO-66(Zr)NH₂, Ti/TiO₂NT-Ru₃(BTC), respectively. The influence of the generation of hydroxyl radical was then studied. The results indicate that PEC degradation using Ti/TiO₂NT-Ru₃(BTC)₂ and Ti/TiO₂NT-UiO-66(Zr)NH₂ is more affected by the concentration of the radical.

A metal-organic framework-based immunomodulatory nanoplatform for anti-atherosclerosis treatment

Immunomodulatory therapy has become a promising method for the clinical treatment of many diseases. Recently, pilot studies revealed that immunomodulatory therapy exhibited good effects on the treatment of cardiovascular diseases, but many problems remain to be solved, such as useful platforms for drug co-delivery and combination therapies. In this study, we designed and constructed the multifunctional nanoparticle Rapa@UiO-66-NH-FAM-IL-1Ra (RUFI) for the treatment of atherosclerotic cardiovascular disease. This nanoplatform combined the advantages of metal-organic frameworks (MOFs) for drug co-delivery, rapamycin and IL-1Ra for immunomodulation, IL-1Ra for cellular targeting, and 5-FAM for fluorescence imaging. RUFI exhibited good drug release of rapamycin and IL-1Ra and specific cytotoxicity for inflammatory macrophages in vitro. In an atherosclerotic model of diet-fed ApoE^-/- mice, RUFI significantly targeted and reduced atherosclerosis plaques in coronary arteries, carotid arteries, and aortas. Mechanistic studies indicated that RUFI modulated macrophage phenotype, cytokine expression, and autophagy. This study demonstrated that combination therapy with rapamycin and IL-1Ra via MOF carriers enhanced the immunoregulatory effects against atherosclerosis. This drug co-delivery system suggests that MOF carriers loaded with immunomodulators are promising treatments for atherosclerosis or other inflammatory diseases.

Guest-dependent bond flexibility in UiO-66, a "stable" MOF

We report "flexibility constants"-a conceptual analog to metal-ligand stability constants-of UiO-66, the prototypical "stable" MOF, across a wide temperature range in both vacuum and in the presence of typical guest solvents. With these data, we extract key thermodynamic parameters governing the reversible bond equilibrium and demonstrate that guest molecules strongly favor the reversible dissociation of MOF metal-linker bonds.

Adsorption efficacy of functionalized Cu-BDC MOFs tethered 2-mercaptobenzimidazole analogue: A comparative study

A novel metal-organic framework [MOFs], and 2-[benzo [d]thiazol-2-ylthio)-3-hydroxy acrylaldehyde-Cu-benzene dicarboxylic acid was synthesized by solvothermal method and characterized using p-XRD, FSEM-EDX, TGA, BET, FTIR. The tethered organic linker, 2-[benzo [d]thiazol-2-ylthio)-3-hydroxyacrylaldehyde was commonly known as 2-mercaptobenimidazole analogue [2-MBIA]. Analysis of BET disclosed that addition of 2-MBIA to Cu-benzene dicarboxylic acid [Cu-BDC], reduced the crystallite size from 70.0 nm to 65.90 nm, surface area from 17.95 to 17.02 m² g^-1 and enhances the pore size from 5.84 nm with 0.027 cm³ g^-1 pore volume to 8.74 nm with 0.361 cm³ g^-1 pore volume. Batch experiments were conducted to optimize pH, adsorbent dosage, and, Congo red (CR) concentration. The adsorption percentage of CR on the novel MOFs was 54%. Adsorption kinetic studies revealed that the uptake adsorption capacity at equilibrium was 184.7 mg/g from pseudo-first-order kinetics which gave a good fit with the experimental data. Intraparticle diffusion model explained the process of the adsorption mechanism: diffusion from the bulk solution onto the porous surface of the adsorbent. Freundlich and Sips models were the best fit models of the several non-linear isotherm models. Temkin isotherm suggested the adsorption of CR on MOFs was of an exothermic nature.

Fe3O4 supported UiO-66 (Zr) metal-organic framework for removal of drug contaminants from water: fuzzy logic modeling approach

The increase in production and consumption of pharmaceuticals and personal care products causes environmental problems. In this study, naproxen and clofibric acid adsorption were studied using Fe₃O₄-supported UiO-66 (Zr) metal-organic framework (Mag-UiO-66). The adsorption processes were carried out in batch mode at pH value 3.0. The optimum adsorbent quantities, equilibrium periods, pseudo-first-order (PFO), pseudo-second-order (PSO), and intra-particles diffusion kinetic models were calculated. Non-linear Langmuir, Freundlich, Dubinin-Radushkevich (D-R), and Sips isotherm equations were applied to experimental data. Thermodynamic analyses of naproxen and clofibric acid adsorption were also carried out in this study. The Langmuir isotherm q_m values were found as 14.15 mg/g for naproxen at 308 K and 41.87 mg/g for clofibric acid at 298 K. Both of the adsorption processes were exothermic. MISO (multi-input single-output) fuzzy logic models for removal of both naproxen and clofibric acid adsorptions were designed based on the experimental data to estimate the removal uptake values. It is noteworthy that the results obtained through designed fuzzy logic models matched well with the experimental data and the findings of this study emphasize the validity of designed fuzzy logic models.

Porphyrin-Moiety-Functionalized Metal-Organic Layers Exhibiting Catalytic Capabilities for Detoxifying Nerve Agent and Blister Agent Simulants

The development of very efficient bifunctional catalysts for the simultaneous detoxification of two kinds of the deadliest chemical warfare agents (CWAs), nerve agent and blister agent, is highly desirable. In this study, two porphyrin-based ligands [tetrakis(4-carboxyphenyl) porphyrin (TCPP) and protoporphyrin IX (PPIX)] are introduced into 2D Zr-1,3,5-tris(4-carboxyphenyl)benzene (BTB) metal-organic layers (MOLs), composed of six-connected Zr₆ nodes and the tritopic carboxylate ligand BTB, by a solvent-assisted ligand incorporation method. The loads of TCPP and PPIX are 6.4 and 10.9 wt %, respectively. The detoxification of simulants of the nerve agent and the blister agent was conducted to investigate the catalytic activity of porphyrin-moiety-functionalized MOLs. The reaction half-life of optimal TCPP-functionalized MOL catalyzing the hydrolysis of a nerve agent simulant is only 2.8 min, meanwhile, the half-life of the selective catalytic oxidation of a blister agent simulant is only 1.2 min under LED illumination. More importantly, such a degradation half-life is only about 4 min under natural sunlight (∼60 mW/cm²). To our knowledge, TCPP-functionalized MOL is by far the most efficient catalyst for blister agent simulant degradation under solar light. Therefore, 2D ultrathin MOLs on demand appear to be a promising and efficient material platform for the development of bifunctional catalysts for CWA protection.

Uncertainty in Composite Membranes: From Defect Engineering to Film Processing

Composite membranes featuring metal-organic framework (MOF)-dispersed polymers have attracted tremendous attention in recent years. However, evaluating commercial viability is oftentimes obscured by the irreproducibility in both MOF synthesis and film manufacturing protocols. Variability in MOF property sets are typically ascribed to crystal defects resulting from subtle variations in synthesis, but quantitative studies investigating the role of defects on transport properties are exceedingly rare. Likewise, controlled film formation protocols are rarely reported in the open literature, making it difficult to provide substantial and informative structure-property correlations. This study aims to address these uncertainties. To this end, two samples of a prototypical MOF, UiO-66-NH₂, were synthesized to feature similar particle size, morphology, and colloidal stability. However, defect engineering protocols coupled with careful screening experiments were developed to synthesize the two MOFs with maximally different porosities. Composite membranes were prepared for each MOF and a high-performance polymer, 6FDA-Durene, and then tested for light gas permeation measurements, revealing a small and unexpected enhancement in CO₂/CH₄ performance for samples containing low-porosity UiO-66-NH₂. Mechanistic studies on sorption revealed a surprising 50% decrease in sorption capacity for high-porosity UiO-66-NH₂, completely offsetting enhancements from increased gas diffusion. By using multiple replicate experiments, the sample-to-sample variation was large enough to obscure any differences in permeability and selectivity between the two types of MOF composites at low volume fractions. Application of the Maxwell model to extrapolate pure-MOF performance led to significant variations in predicted values, demonstrating the importance of collecting and reporting replicate experiments for membrane preparation and testing.

Influence of 1-Butene Adsorption on the Dimerization Activity of Single Metal Cations on UiO-66 Nodes

Grafting metal cations to missing linker defect sites in zirconium-based metal-organic frameworks, such as UiO-66, produces a uniquely well-defined and homotopic catalytically active site. We present here the synthesis and characterization of a group of UiO-66-supported metal catalysts, M-UiO-66 (M = Ni, Co, Cu, and Cr), for the catalytic dimerization of alkenes. The hydrogen-deuterium exchange via deuterium oxide adsorption followed by infrared spectroscopy showed that the last molecular water ligand desorbs from the sites after evacuation at 300 °C leading to M(OH)-UiO-66 structures. Adsorption of 1-butene is studied using calorimetry and density functional theory techniques to characterize the interactions of the alkene with metal cation sites that are found active for alkene oligomerization. For the most active Ni-UiO-66, the removal of molecular water from the active site significantly increases the 1-butene adsorption enthalpy and almost doubles the catalytic activity for 1-butene dimerization in comparison to the presence of water ligands. Other M-UiO-66 (M = Co, Cu, and Cr) exhibit 1-3 orders of magnitude lower catalytic activities compared to Ni-UiO-66. The catalytic activities correlate linearly with the Gibbs free energy of 1-butene adsorption. Density functional theory calculations probing the Cossee-Arlman mechanism for all metals support the differences in activity, providing a molecular level understanding of the metal site as the active center for 1-butene dimerization.

Effect of Modulation and Functionalization of UiO-66 Type MOFs on Their Surface Thermodynamic Properties and Lewis Acid–Base Behavior

In this study, we investigated the surface thermodynamic properties of four MOF structures of the UiO-66 series, by employing seven molecular models, a thermal model, and three other methods using the inverse gas chromatography (IGC) technique at infinite dilution. We first determined the effect of the modulation of UiO-66 by an acid (e.g., formic acid and acetic acid) and on the other hand, we studied the effect of the functionalization of the organic linker by an amine group (NH2) on their dispersive component of the surface energy and on their Lewis acid–base properties. We found that all the studied MOFs presented an amphoteric character with a strong acidity whose acidity/basicity ratio is greater than 1 using all the models and methods in IGC. Moreover, the introduction of a modulator such as acetic acid or formic acid in the synthesis of these MOFs increased the number of structural defects and therefore increased the acidity of these MOFs. Similarly, the functionalization of the MOF by the NH2 group leads to an increase in the basicity constant of the functionalized MOF while remaining smaller than their acidity constant. In addition, the use of acids as modulators and amine groups as functional groups resulted in an increase in the dispersive component of the surface energy of the MOFs. Finally, comparing the results obtained by the different models and methods and based on the increasing order of the acidity of each MOF, it was clear that the thermal model resulted in more exact and precise values than the others. Our findings pave the way for the design and development of new acid catalysts based on UiO-66 structures.

Visual detection of vitamin C in fruits and vegetables using UiO-66 loaded Ce-MnO2 mimetic oxidase

A nanocomposite (UiO-66/Ce-MnO₂) was fabricated by combining UiO-66 with cerium-doped manganese dioxide (Ce-MnO₂) for colorimetric detecting vitamin C (Vc). Compared with traditional artificial enzymes, the as-synthesized UiO-66/Ce-MnO₂ were simple to prepare and did not require the participation of other active substances. The doping of cerium increased the oxygen vacancies and the UiO-66 as a carrier improved the dispersibility. The formation of superoxide anion (O₂^-) and the inside Ce⁴⁺/Ce³⁺ and Mn⁴⁺/Mn³⁺ redox couples of UiO-66/Ce-MnO₂ endowed UiO-66/Ce-MnO₂ with a high catalytic capability, which could catalytically oxidize 3, 3', 5, 5'-tetramethylbenzidine (TMB) into oxidation state TMB (oxTMB) without H₂O₂, accompanying with color change and a prominent peak at 652 nm in UV-vis spectra. Based on the inhibitory effects of Vc on catalytic oxidation of TMB, detection of Vc can be achieved, exhibiting a linear relationship in the concentration of 1.13-17.01 μmol L^-1 with a low detection limit of 65.82 nmol L^-1. This system can also be detected by smartphone, the linear detection range is 12.47-22.67 μmol L^-1. Vc contents in fruits and vegetables detected by the sensor were in good agreement with the 2, 4-Dinitrophenylhydrazine colorimetry method (P > 0.05), indicating a reliable sensor for Vc detection.

Regulating defective sites for pharmaceuticals selective removal: Structure-dependent adsorption over continuously tunable pores

Developing efficient adsorbents with proper pore size for pharmaceutical removal is challenging. Water stable metal-organic frameworks (MOFs) are crystalline materials within the three-dimensional frameworks, which have already aroused increasing attention for their potential advantages with high surface area and abundant channels. However, whether or not the existing ones are performing their full capacities needs to be seriously considered. Herein, we precisely designed a series of fine-tuning hierarchically porous materials based on the water-stable Zr-based MOFs. The adsorption capacity and uptake rate of as-synthesized materials for pharmaceuticals are significantly improved. Fifteen isostructural frameworks with increasing finely tuned pore structures were successfully constructed with seven monocarboxylic modulators of increasing alkyl chain lengths. A strong correlated relationship between the mesoporous proportion and trapping kinetics can be found. Adsorption performance of 17 pharmaceuticals with various typical categories has been systematically studied over these as-synthesized materials. Competitors in natural wastewater were studied systematically. The competitive adsorption can selectively trap the target compounds in HA (humic acid), BSA (bovine serum albumin), and BHB (bovine hemoglobin) by an efficient size exclusion effect. Thus, this study offers helpful guidance for MOF modification to enhance the removal of micropollutants in natural wastewater and a fundamental understanding of the porosity-performance relationships.

Cyclodextrin Metal-Organic Framework as a Broad-Spectrum Potential Delivery Vehicle for the Gasotransmitters

The important role of gasotransmitters in physiology and pathophysiology suggest employing gasotransmitters for biomedical treatment. Unfortunately, the difficulty in storage and controlled delivery of these gaseous molecules hindered the development of effective gasotransmitters-based therapies. The design of a safe, facile, and wide-scale method to delivery multiple gasotransmitters is a great challenge. Herein, we use an ultrasonic assisted preparation γ-cyclodextrin metal organic framework (γ-CD-MOF) as a broad-spectrum delivery vehicle for various gasotransmitters, such as SO₂, NO, and H₂S. The release rate of gasotransmitters could be tuned by modifying the γ-CD-MOF with different Pluronics. The biological relevance of the exogenous gasotransmitters produced by this method is evidenced by the DNA cleavage ability and the anti-inflammatory effects. Furthermore, the γ-CD-MOF composed of food-grade γ-CD and nontoxic metal salts shows good biocompatibility and particle size (180 nm). Therefore, γ-CD-MOF is expected to be an excellent tool for the study of co-delivery and cooperative therapy of gasotransmitters.

Confinement-Driven Photophysics in Hydrazone-Based Hierarchical Materials

Confinement-imposed photophysics was probed for novel stimuli-responsive hydrazone-based compounds demonstrating a conceptual difference in their behavior within 2D versus 3D porous matrices for the first time. The challenges associated with photoswitch isomerization arising from host interactions with photochromic compounds in 2D scaffolds could be overcome in 3D materials. Solution-like photoisomerization rate constants were realized for sterically demanding hydrazone derivatives in the solid state through their coordinative immobilization in 3D scaffolds. According to steady-state and time-resolved photophysical measurements and theoretical modeling, this approach provides access to hydrazone-based materials with fast photoisomerization kinetics in the solid state. Fast isomerization of integrated hydrazone derivatives allows for probing and tailoring resonance energy transfer (ET) processes as a function of excitation wavelength, providing a novel pathway for ET modulation.

Green synthesis of a hydrophobic metal-organic gel for the capture of trace odorous hexanal from humid air

The development of superhydrophobic adsorbents for the capture of trace volatile organic compounds (VOCs) from humid indoor air is still a challenge. Herein, we reported the formation of a granular zinc-based metal-organic gel, i.e., ZIF-412(gel) by optimizing the synthesis conditions. The thermally stable xerogel exhibited high surface area (1008 m²/g), hydrophobicity, and viscosity for self-depositing on the substrate such as non-woven fibers. Dynamic adsorption experiments under various humidity conditions demonstrated as-synthesized ZIF-412(gel) owned excellent VOC (hexanal) adsorption performance with adsorption capacity higher than commercial activated carbon and some water-stable MOFs including ZIF-8, ZIF-67, MIL-101(Cr) and ZIF-414. ZIF-412(gel) could be regenerated at temperature as low as 358 K without obvious loss in adsorption capacity. The adsorption mechanism of hexanal over ZIF-412(gel) is also simulated by Grand canonical Monte Carlo (GCMC).

A metal-organic framework surrounded with conjugate acid-base pairs for the efficient capture of Cr(VI) via hydrogen bonding over a wide pH range

Given the large amount of toxic Cr(VI) wastewater from various industries, it is urgent to take effective treatment measures. Adsorption has been regarded as highly desirable for Cr(VI) removal, but the effectiveness of most adsorbents is significantly dependent on pH value, in which precipitous performance drop and even structural collapse generally occur in strong acidic/alkaline aqueous. Thus, maintaining high adsorption performance and structural integrity over a wide pH range is challenging. To efficiently remove Cr(VI), we designed and prepared of an acid-base resistant metal-organic framework (MOF) Zr-BDPO, by introducing weak acid-base groups (-NH-, -N= and -OH) onto the ligand. Zr-BDPO achieved a maximum adsorption capacity of 555.6 mg·g^-1 and retained skeletal structure at pH= 1-11. Interestingly, all these groups can generate conjugate acid-base pairs by means of H⁺ and OH^- in the external solution and then form buffer layer. The removal of Cr(VI) at a broad range of pH values primarily via hydrogen bonds between -NH- and -OH, and the oxoanion species of Cr(VI) is unusual. This strategy that insulating high concentrations of acids and bases and relying on hydrogen bonds to capture Cr(VI) oxoanions provides a new perspective for actual Cr(VI) wastewater treatment.

A systematic study of a polymer-assisted carboxylate-based MOF synthesis: multiple roles of core cross-linked PMAA-b-PMMA nanoparticles

Colloidaly stable carboxylate-based metal organic frameworks (MOFs), grown from acid decorated nanoparticles synthesized via PISA.

In situ recombination for durable photoelectrocatalytic degradation of organic dye in wastewater

Photoelectrocatalysis (PEC) can effectively degrade organic pollutants by using photoelectrodes without secondary pollution. However, significant mass transport resistance and decreased catalytic activity caused by the shedding of active components remain a barrier to achieving the photocatalytic system with a high degradation rate and long-term durability. Here, an in situ recombination concept is presented to overcome this challenge. The bionic coral-like electrode, obtained by in situ assembly of UIO-66 around TiO₂ nanoflowers (TNF) on Ti-foam substrate, is employed as the photoanode in PEC. Ex situ evaluation of photoelectrochemical activity demonstrates that the UIO-66@TNF/Ti-foam (U@T/T) design significantly improves the light-propagation, light-absorption and charge transfer. In Situ degradation evaluations also shows that the interesting design promotes rapid and stable degradation of organic dye (e.g. Rhodamine B (RhB)). At 2.0 V of bias potential and pH 7.0 in 5 mg L^-1 RhB, under the action of active species such as ·O₂^- and ·OH (proved by the degradation mechanism experiments), the removal rate of RhB can reach 96.1% at 120 min and almost complete removal at 200 min (99.1%).

Magnetic Nanocomposites of Coated Ferrites/MOF as Pesticide Adsorbents

Magnetic metal-organic frameworks (MMOFs) are gaining increased attention as emerging adsorbents/water remediation agents. Herein, a facile development of novel MMOFs comprised of coated ferrite nanoparticles (MNPs) and UiO-66 metal-organic framework is reported. In specific, coated Co- and Zn-doped ferrite magnetic nanoparticles were synthesized as building block while the metal-organic framework was grown in the presence of MNPs via a semi-self-assembly approach. The utilization of coated MNPs facilitated the conjugation and stands as a novel strategy for fabricating MMOFs with increased stability and an explicit structure. MMOFs were isolated with 13-25 nm crystallites sizes, 244-332 m²/g specific surface area (SSA) and 22-42 emu/g saturation magnetization values. Establishing the UiO-66 framework via the reported semi-self-assembly resulted in roughly 70% reduction in both magnetic properties and SSA, compared with the initial MNPs building blocks and UiO-66 framework, respectively. Nonetheless, the remaining 30% of the magnetization and SSA was adequate for successful and sufficient adsorption of two different pesticides, 2,4-Dichlorophenoxyacetic acid (2,4-D) and 2,4,5-Trichlorophenoxyacetic acid (2,4,5-T), while the recovery with a commercial magnet and reuse were also found to be effective. Adsorption and kinetic studies for all three MMOFs and both pesticides were performed, and data were fitted to Langmuir-Freundlich isotherm models.