A Modified Fokker-Planck Approach for a Complete Description of Vibrational Kinetics in a N2 Plasma Chemistry Model

The Fokker-Planck (FP) approach for the description of vibrational kinetics is extended in order to include multiquanta transitions and time dependent solutions. Due to the importance of vibrational ladder climbing for the optimization of plasma-assisted nitrogen fixation, nitrogen is used as a test case with a comprehensive set of elementary processes affecting the vibrational distribution function (VDF). The inclusion of the vibrational energy equation is shown to be the best way to model transient conditions in a plasma reactor using the FP approach. Results are benchmarked against results from the widely employed state-to-state (STS) approach for a wide parameters range. STS and FP solutions agree within ∼10% for the lowest vibrational levels, while time dependent VDFs are in agreement with the STS solution within a ∼ 5% error. Using the FP approach offers the possibility to parametrize drift and diffusion coefficients in energy space as a function of vibrational and gas temperature, providing intuitive and immediate insights into energy transport within the vibrational manifold.

Plasma-Assisted Reforming of Methane

Methane (CH4 ) is inexpensive, high in heating value, relatively low in carbon footprint compared to coal, and thus a promising energy resource. However, the locations of natural gas production sites are typically far from industrial areas. Therefore, transportation is needed, which could considerably increase the sale price of natural gas. Thus, the development of distributed, clean, affordable processes for the efficient conversion of CH4 has increasingly attracted people's attention. Among them are plasma technology with the advantages of mild operating conditions, low space need, and quick generation of energetic and chemically active species, which allows the reaction to occur far from the thermodynamic equilibrium and at a reasonable cost. Significant progress in plasma-assisted reforming of methane (PARM) is achieved and reviewed in this paper from the perspectives of reactor development, thermal and nonthermal PARM routes, and catalysis. The factors affecting the conversion of reactants and the selectivity of products are studied. The findings from the past works and the insight into the existing challenges in this work should benefit the further development of reactors, high-performance catalysts, and PARM routes.

Viral disinfection using nonthermal plasma: A critical review and perspectives on the plasma-catalysis system

The transmission of viral infections via aerosol has become a serious threat to public health. This has produced an ever-increasing demand for effective forms of viral inactivation technology/processes. Plasma technology is rising in popularity and gaining interest for viral disinfection use. Due to its highly effectively disinfection and flexible operation, non-thermal plasma (NTP) is a promising technology in decontaminating bacteria or virus from air or surfaces. This review discusses the fundamentals of non-thermal plasma and the disinfection mechanisms of the biocidal agents produced in plasma, including ultraviolet (UV) photons, reactive oxygen species, and reactive nitrogen species. Perspectives on the role of catalysts and its potential applications in cold plasma disinfection are discussed.

Synergistic cellulose-based nanocomposite packaging and cold plasma decontamination for extended saffron preservation

Sterilization of saffron packaging and maintaining the quality of saffron content are the main priorities in saffron preservation. Common modalities do not offer lasting saffron preservation and it is urgent to develop novel packaging approaches from renewable resources and prevent packaging waste. Here, simultaneous decontamination and quality maintenance of saffron is demonstrated, for the first time, through the synergistic application of nano-clay-loaded carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) nanocomposites (CNCs) and cold plasmas (CP). Compared to the separate uses of CP and CMC/PVA/nano clay, our results confirm the synergies between CP and CMC/PVA/nano clay cause complete inactivation of Escherichia coli bacteria, while not significantly affecting the concentrations of the essential saffron components (safranal, crocin, and picrocrocin). Overall, the CP-treated CMC/PVA/nano clay fosters saffron preservation, through contamination removal and quality maintenance of the food product. The synergistic application of CP and CMC/PVA/nano clay thus represents a promising strategy for packaging, sterilization, and preservation of high-value food products.

Plasma-Catalytic CO2 Hydrogenation over a Pd/ZnO Catalyst: In Situ Probing of Gas-Phase and Surface Reactions

Plasma-catalytic CO₂ hydrogenation is a complex chemical process combining plasma-assisted gas-phase and surface reactions. Herein, we investigated CO₂ hydrogenation over Pd/ZnO and ZnO in a tubular dielectric barrier discharge (DBD) reactor at ambient pressure. Compared to the CO₂ hydrogenation using Plasma Only or Plasma + ZnO, placing Pd/ZnO in the DBD almost doubled the conversion of CO₂ (36.7%) and CO yield (35.5%). The reaction pathways in the plasma-enhanced catalytic hydrogenation of CO₂ were investigated by in situ Fourier transform infrared (FTIR) spectroscopy using a novel integrated in situ DBD/FTIR gas cell reactor, combined with online mass spectrometry (MS) analysis, kinetic analysis, and emission spectroscopic measurements. In plasma CO₂ hydrogenation over Pd/ZnO, the hydrogenation of adsorbed surface CO₂ on Pd/ZnO is the dominant reaction route for the enhanced CO₂ conversion, which can be ascribed to the generation of a ZnO _x overlay as a result of the strong metal-support interactions (SMSI) at the Pd-ZnO interface and the presence of abundant H species at the surface of Pd/ZnO; however, this important surface reaction can be limited in the Plasma + ZnO system due to a lack of active H species present on the ZnO surface and the absence of the SMSI. Instead, CO₂ splitting to CO, both in the plasma gas phase and on the surface of ZnO, is believed to make an important contribution to the conversion of CO₂ in the Plasma + ZnO system.

Cooperative Catalysis of Vibrationally Excited CO2 and Alloy Catalyst Breaks the Thermodynamic Equilibrium Limitation

Using nonthermal plasma (NTP) to promote CO₂ hydrogenation is one of the most promising approaches that overcome the limitations of conventional thermal catalysis. However, the catalytic surface reaction dynamics of NTP-activated species are still under debate. The NTP-activated CO₂ hydrogenation was investigated in Pd₂Ga/SiO₂ alloy catalysts and compared to thermal conditions. Although both thermal and NTP conditions showed close to 100% CO selectivity, it is worth emphasizing that when activated by NTP, CO₂ conversion not only improves more than 2-fold under thermal conditions but also breaks the thermodynamic equilibrium limitation. Mechanistic insights into NTP-activated species and alloy catalyst surface were investigated by using in situ transmission infrared spectroscopy, where catalyst surface species were identified during NTP irradiation. Moreover, in in situ X-ray absorption fine-structure analysis under reaction conditions, the catalyst under NTP conditions not only did not undergo restructuring affecting CO₂ hydrogenation but also could clearly rule out catalyst activation by heating. In situ characterizations of the catalysts during CO₂ hydrogenation depict that vibrationally excited CO₂ significantly enhances the catalytic reaction. The agreement of approaches combining experimental studies and density functional theory (DFT) calculations substantiates that vibrationally excited CO₂ reacts directly with hydrogen adsorbed on Pd sites while accelerating formate formation due to neighboring Ga sites. Moreover, DFT analysis deduces the key reaction pathway that the decomposition of monodentate formate is promoted by plasma-activated hydrogen species. This work enables the high designability of CO₂ hydrogenation catalysts toward value-added chemicals based on the electrification of chemical processes via NTP.

Influence of flow regime on the decomposition of diluted methane in a nitrogen rotating gliding arc

This work reports the operation of rotating gliding arc (RGA) reactor at a high flow rate and the effect of flow regimes on its chemical performance, which is not explored much. When the flow regime was changed from transitional to turbulent flow (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$5\rightarrow 50~\hbox {SLPM}$$\end{document}5→50SLPM), operation mode transitioned from glow to spark type; the average electric field, gas temperature, and electron temperature raised (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$106\rightarrow 156~\hbox {V}\cdot \hbox {mm}^{-1}$$\end{document}106→156V·mm-1, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$3681\rightarrow 3911~\hbox {K}$$\end{document}3681→3911K, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$1.62\rightarrow 2.12~\hbox {eV}$$\end{document}1.62→2.12eV). The decomposition’s energy efficiency (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\eta _E$$\end{document}ηE) increased by a factor of 3.9 (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$16.1\rightarrow 61.9~\hbox {g}_{{\text{CH}}_{4}}\cdot \hbox {kWh}^{-1}$$\end{document}16.1→61.9gCH4·kWh-1). The first three dominant methane consumption reactions (MCR) for both the flow regimes were induced by \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {H}$$\end{document}H, CH, and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {CH}_3$$\end{document}CH3 (key-species), yet differed by their contribution values. The MCR rate increased by 80–148% [induced by e and singlet—\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {N}_2$$\end{document}N2], and decreased by 34–93% [CH, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {CH}_3$$\end{document}CH3, triplet—\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {N}_2$$\end{document}N2], due to turbulence. The electron-impact processes generated atleast 50% more of key-species and metastables for every 100 eV of input energy, explaining the increased \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\eta _E$$\end{document}ηE at turbulent flow. So, flow regime influences the plasma chemistry and characteristics through flow rate. The reported RGA reactor is promising to mitigate the fugitive hydrocarbon emissions energy efficiently at a large scale, requiring some optimization to improve conversion.

A Simple and Compact Laser Scattering Setup for Characterization of a Pulsed Low-Current Discharge

Recent research trends show an increasing interest in non-equilibrium plasmas operated at atmospheric pressure, which are often used to tackle several environmental and health issues. Nevertheless, due to the complexity of the applications, these trends also show the need for a comprehensive characterization of such plasmas for a deeper understanding of the observed effects. One of the diagnostic methods for experimental determination of key parameters which affect the reactivity of a plasma, i.e., electron temperature, electron density and heavy particle temperature, is laser scattering. In this work, an approach based on a simple and compact laser scattering setup is proposed, which allows an estimation of the above parameters without any additional changes in the acquisition settings. Thus, the experimental effort and possible sources of error can be reduced. The proposed setup is tested experimentally with a commercially available pulsed plasma system, and the results are compared to available data. From this comparison, it is found that the plasma parameters estimated with the proposed scattering setup are plausible.

Influence of Pulse Amplitude and Frequency on Plasma Properties of a Pulsed Low-Current High-Voltage Discharge Operated at Atmospheric Pressure

Non-equilibrium conditions in plasma are often achieved by pulsed power delivery, where the pulse shape and repetition rate determine the properties of the plasma constituents and thus its chemical reactivity. The evaluation of the latter is becoming increasingly important to understand the observed effects, especially when new application fields are targeted. The composition of the plasma and the occurring chemical reactions can be calculated using various models. Thereby, the temperature of the electrons, the electron number density, as well as the heavy particle temperature are usually required as the basis of such calculations. In this work, the influence of pulse amplitude and repetition rate on these plasma parameters is determined by laser scattering for a low-current, high-voltage discharge operated with nitrogen at atmospheric pressure. In particular, the characteristic parameters regarding the plasma free electrons in such discharges have not yet been experimentally determined to this extent. The results are validated by spectroscopic measurements, i.e., the electron density is estimated from the Stark broadening of the hydrogen beta line and the heavy particle temperature is estimated by fitting the spectrum of nitrogen molecular transitions. Depending on the operating frequency, a pure nitrogen discharge with an input power of about 650 W displays an electron density between 1.7×1021m−3 and 2.0×1021m−3 with electron temperatures in the range of 40,000 K and heavy particle temperatures of about 6000 K in the core of the discharge channel. Furthermore, a relatively slow electron recombination rate in the range of 20 µs is observed.

Spectroscopic Characterization of a Pulsed Low-Current High-Voltage Discharge Operated at Atmospheric Pressure

The advantages of pulsed low-current high-voltage discharges operated at atmospheric pressure and the ease with which such discharges can be implemented industrially contributed to their popularity. However, the high reactivity of a pulsed plasma implies that thorough diagnostics are needed to fully understand the interactions inside these plasmas. Some of the key parameters determining plasma properties of low-current discharges are the electron number density and the temperature of heavy particles. Both parameters can be determined experimentally with spectroscopic techniques, for example by investigating the broadening of spectral lines due to the Stark effect and by fitting synthetic spectra to molecular transitions. To the authors’ knowledge, experimentally determined electron densities for pulsed low-current discharges operated in a power range between 300 W and 1000 W have not been performed in previous works. Thus, in this work, the electron number density and temperature of heavy particles of one of several commercially available plasma systems are determined by means of emission spectroscopy.

Techno-environmental assessment of small-scale Haber-Bosch and plasma-assisted ammonia supply chains

Haber-Bosch (HB) process, the main method for ammonia (NH₃) production, contributes to near 2% of the global carbon emissions because the hydrogen input is obtained from fossil sources. NH₃ production is concentrated in a few countries, adding emissions due to global distribution. Distributed plants next to farmers and fed by renewable energy can reduce these impacts, as well as NH₃ storage, shortage risks, and price volatility. Distributed plants cannot reach low NH₃ production costs as centralised plants, but they can be promoted by the environmental benefits of its products lifecycles. Therefore, life cycle assessments of NH₃ production pathways and specific modelling for NH₃ transport in Australia were performed, from cradle-to-site, to identify the influence of storage, transport, and energy sources in their environmental profiles. The carbon footprint of centralised production was up to 2.96 kg.CO_2-eq/kg.NH₃, from which 29.3% corresponded to transport. Local production demonstrated substantial avoided transport impacts and that CO_2-eq can reach reductions over 100% when including co-product credits such as oxygen and carbon black. Local plants using electrolysers to supply mini-HB loops obtained rates of 0.12, -0.52, and -1.57 kg.CO_2-eq/kg.NH₃ using electricity from solar, wind, and biogas (other than manure) sources, respectively. The alternative using high temperature plasma reactor instead of electrolyser obtained its best rate of -0.65 kg.CO_2-eq/kg using biogas different from manure. At farm electrolyser-based plants using novel non-thermal plasma reactors, considering potential energy yields and simplified NH₃ separation technology, could reach a rate of -1.07 kg.CO_2-eq/kg.NH_3, using solar energy. Among the assessed pathways, the most notable impact was on freshwater eutrophication in the electrolyser-based plants generating reductions up to 290%, due to oxygen credits. Despite these results, the use of solar energy raises concerns on land use and terrestrial ecotoxicity due to the area needed for solar farms and the manufacture of their components.

Mid-infrared supercontinuum-based Fourier transform spectroscopy for plasma analysis

Broadband mid-infrared (MIR) spectroscopy is a well-established and valuable diagnostic technique for reactive plasmas. Plasmas are complex systems and consist of numerous (reactive) types of molecules; it is challenging to measure and control reaction specificity with a good sensitivity. Here, we demonstrate the first use of a novel MIR supercontinuum (SC) source for quantitative plasma spectroscopy. The SC source has a wide spectral coverage of 1300–2700 cm⁻¹ (wavelength range 3.7–7.7 μm), thus enabling broadband multispecies detection. The high spatial coherence of the MIR SC source provides long interaction path lengths, thereby increasing the sensitivity for molecular species. The combination of such a SC source with a custom-built FTIR spectrometer (0.1 cm⁻¹ spectral resolution) allows detection of various gases with high spectral resolution. We demonstrate its potential in plasma applications by accurate identification and quantification of a variety of reaction products (e.g. nitrogen oxides and carbon oxides) under low-pressure conditions, including the molecular species with overlapping absorbance features (e.g. acetone, acetaldehyde, formaldehyde, etc.).

Ion Chemistry of Carbon Dioxide in Nonthermal Reaction with Molecular Hydrogen

The exothermic hydrogen transfer from H₂ to CO₂^·+ leading to H and HCO₂⁺ is investigated in a combined experimental and theoretical work. The experimental mass/charge ratios of the ionic product (HCO₂⁺) and the ionic reactant (CO₂^·+) are recorded as a function of the photoionization energy of the synchrotron radiation. Theoretical density functional calculations and variational transition state theory are employed and adapted to analyze the energetic and the kinetics of the reaction, which turns out to be barrierless and with nonthermal rate coefficients controlled by nonstatistical processes. This study aims to understand the mechanisms and energetics that drive the reactivity of the elementary reaction of CO₂^·+ with H₂ in different processes.

Self-triggering topology for high-power nanosecond pulse generators based on avalanche transistors Marx bank circuits and linear transformer driver

In recent years, several novel avalanche transistor-based power synthesis topologies have been proposed to improve the output performance of pulse generators based on avalanche transistors. The most promising is the topology based on avalanche transistors Marx Bank Circuits (MBCs) and linear transformer driver (LTD). However, it suffers from the same problems as other semiconductor switch-based LTD generators. The greater the number of LTD modules, the higher the requirements for synchronization and drive capability of the trigger system. This paper proposes a new self-triggering topology for pulse generators based on avalanche transistors MBCs and LTD, which significantly simplifies the entire generator's requirement for trigger system synchronization and driving capability. First, the circuit topology and its operation principle are introduced. Then, three prototypes with one trigger LTD module and three self-triggering LTD modules are developed. The output characteristics are experimentally investigated. The results verify the feasibility of the proposed topology. Finally, the output amplitude and the rise time are 3.35 kV/3.7 ns, 4.12 kV/3.7 ns, and 4.88 kV/4.0 ns on a 25 Ω resistive load, respectively. All generators can operate at 1 kHz. The topology proposed in the article maximally simplifies the requirements for synchronization and drive capability of the trigger system for generators based on avalanche transistor MBCs and LTD.

The Chemical Origins of Plasma Contraction and Thermalization in CO2 Microwave Discharges

Thermalization of electron and gas temperature in CO₂ microwave plasma is unveiled with the first Thomson scattering measurements. The results contradict the prevalent picture of an increasing electron temperature that causes discharge contraction. It is known that as pressure increases, the radial extension of the plasma reduces from ∼7 mm diameter at 100 mbar to ∼2 mm at 400 mbar. We find that, simultaneously, the initial nonequilibrium between ∼2 eV electron and ∼0.5 eV gas temperature reduces until thermalization occurs at 0.6 eV. 1D fluid modeling, with excellent agreement with measurements, demonstrates that associative ionization of radicals, a mechanism previously proposed for air plasma, causes the thermalization. In effect, heavy particle and heat transport and thermal chemistry govern electron dynamics, a conclusion that provides a basis for ab initio prediction of power concentration in plasma reactors.

Cold plasma technologies: Their effect on starch properties and industrial scale-up for starchmodification

Native starches have limited applications in the food industry due to their unreactive and insoluble nature. Cold plasma technology, including plasma-activated water (PAW), has been explored to modify starches to enhance their functional, thermal, molecular, morphological, and physicochemical properties. Atmospheric cold plasma and low-pressure plasma systems have been used to alter starches and have proven successful. This review provides an in-depth analysis of the different cold plasma setups employed for starch modifications. The effect of cold plasma technology application on starch characteristics is summarized. We also discussed the potential of plasma-activated water as a novel alternative for starch modification. This review provides information needed for the industrial scale-up of cold plasma technologies as an eco-friendly method of starch modification.

•

Cold plasma technology could be an effective, sustainable alternative for starch modification.

•

The extent of modification of starches from different botanical sources depends on the type of cold plasma technology used.

•

For mainstream adoption of cold plasma modified starches, research on safety and consumer perception must be conducted.

Tailoring Layer Number of 2D Porphyrin-Based MOFs Towards Photocoupled Electroreduction of CO2

Inspired by the success of graphene, a series of single- or few-layer 2D materials have been developed and applied in the past decade. Here, the successful preparation of monolayer and bilayer 2D porphyrin-based metal-organic frameworks (MOFs) by a facile solvothermal method is reported. The structure transition from monolayer to bilayer drives distinct electronic properties and restructuring behaviors, which finally results in distinct catalytic pathways towards CO₂ electrocatalysis. The monolayer favors CO₂ -to-C₂ pathway due to the restructuring of CuO₄ sites, while CO and HCOO^- are the major products over the bilayer. In photocoupled electrocatalysis, the Faradaic efficiency (FE) of the C₂ compounds shows a nearly fourfold increase on the monolayer than that under dark conditions (FE_C2 increases from 11.9% to 41.1% at -1.4 V). For comparison, the light field plays a negligible effect on the bilayer. The light-induced selectivity optimization is investigated by experimental characterization and density functional theory (DFT) calculations. This work opens up a novel possibility to tune the selectivity of carbon products just by tailoring the layer number of the 2D material.

Dielectric Barrier Discharge Plasma-Assisted Catalytic CO2 Hydrogenation: Synergy of Catalyst and Plasma

CO2 hydrogenation is an effective way to convert CO2 to value-added chemicals (e.g., CH4 and CH3OH). As a thermal catalytic process, it suffers from dissatisfactory catalytic performances (low conversion/selectivity and poor stability) and high energy input. By utilizing the dielectric barrier discharge (DBD) technology, the catalyst and plasma could generate a synergy, activating the whole process in a mild condition, and enhancing the conversion efficiency of CO2 and selectivity of targeted product. In this review, a comprehensive summary of the applications of DBD plasma in catalytic CO2 hydrogenation is provided in detail. Moreover, the state-of-the-art design of the reactor and optimization of reaction parameters are discussed. Furthermore, several mechanisms based on simulations and experiments are provided. In the end, the existing challenges of this hybrid system and corresponding solutions are proposed.