Bacterial community structure, compartmentalization and activity in a microbial fuel cell

Substrate removal and electricity generation in a membrane-less microbial fuel cell for biological treatment of wastewater

Microbial fuel cells have gained popularity in recent years due to its promise in converting organic wastewater into renewable electrical energy. In this study, a membrane-less MFC with a biocathode was developed to evaluate its performance in electricity generation while simultaneously treating wastewater. The MFC fed with a continuous flow of 2g/day acetate produced a power density of 30 mW/m(2) and current density of 245 mA/m(2). A substrate degradation efficiency (SDE) of 75.9% was achieved with 48.7% attributed to the anaerobic process and 27.2% to the aerobic process. Sequencing analysis of the microbial consortia using 16S rDNA pryosequencing showed the predominance of Bacteroidia in the anode after one month of operation, while the microbial community in the cathode chamber was dominated by Gamma-proteobacteria and Beta-proteobacteria. Coulombic efficiencies varied from 19.8% to 58.1% using different acetate concentrations, indicating power density can be further improved through the accumulation of electron-transferring bacteria.

Enhanced anaerobic digestion of organic contaminants containing diverse microbial population by combined microbial electrolysis cell (MEC) and anaerobic reactor under Fe(III) reducing conditions

Microbial electrolysis cell (MEC) devices are efficient for wastewater treatment, but its application was limited due to low anode oxidation rate. The objective of this study was to improve anode performance of a MEC combined anaerobic reactor (R1) for high concentration industrial wastewater treatment via dosing Fe(OH)3. For the first 53 days without power, the addition of Fe(OH)3 in R1 enhanced the degradation of reactive brilliant red X-3B dye and sucrose. Applying a voltage of 0.8 V in R1 resulted in a higher decolorization and COD removal through driving the redox reactions at electrodes under Fe(III)-reducing conditions. Real-time PCR and enzyme activity analysis showed that the abundance and azoreductase activity of bacteria were improved in R1. Pyrosequencing revealed that dominant populations in anode biofilm and R1 were more diverse and abundant than the common anaerobic reactor (R2), and there was a significant distinction among anode film, R1 and R2 in microbial community structure.

Electricity generation from cattle dung using microbial fuel cell technology during anaerobic acidogenesis and the development of microbial populations

A microbial fuel cell (MFC) was constructed to investigate the possible generation of electricity using cattle dung as a substrate. After 30 days of operation, stable electricity was generated, and the maximum volumetric power density was 0.220 W/m(3). The total chemical oxygen demand (TCOD) removal and coulombic efficiency (CE) of the MFC reached 73.9±1.8% and 2.79±0.6%, respectively, after 120 days of operation. Acetate was the main metabolite in the anolyte, and other volatile fatty acids (VFAs) (propionate and butyrate) were present in minor amounts. The PCR-DGGE analysis indicated that the following five groups of microbes were present: Proteobacteria, Bacteroides, Chloroflexi, Actinobacteria and Firmicutes. Proteobacteria and Firmicutes were the dominant phyla in the sample; specifically, 36.3% and 24.2% of the sequences obtained were Proteobacteria and Firmicutes, respectively. Clostridium sp., Pseudomonas luteola and Ochrobactrum pseudogrignonense were the most dominant groups during the electricity generation process. The diversity of archaea dramatically decreased after 20 days of operation. The detected archaea were hydrogenotrophic methanogens, and the Methanobacterium genus disappeared during the periods of stable electricity generation via acidogenesis.

Treatment of alcohol distillery wastewater using a Bacteroidetes-dominant thermophilic microbial fuel cell

Simultaneous electricity generation and distillery wastewater (DWW) treatment were accomplished using a thermophilic microbial fuel cell (MFC). The results suggest that thermophilic MFCs, which require less energy for cooling the DWW, can achieve high efficiency for electricity generation and also reduce sulfate along with oxidizing complex organic substrates. The generated current density (2.3 A/m(2)) and power density (up to 1.0 W/m(2)) were higher than previous wastewater-treating MFCs. The significance of the high Coulombic efficiency (CE; up to 89%) indicated that electrical current was the most significant electron sink in thermophilic MFCs. Bacterial diversity based on pyrosequencing of the 16S rRNA gene revealed that known Deferribacteres and Firmicutes members were not dominant in the thermophilic MFC fed with DWW; instead, uncharacterized Bacteroidetes thermophiles were up to 52% of the total reads in the anode biofilm. Despite the complexity of the DWW, one single bacterial sequence (OTU D1) close to an uncultured Bacteriodetes bacterium became predominant, up to almost 40% of total reads. The proliferation of the D1 species was concurrent with high electricity generation and high Coulombic efficiency.

Relationships between soil organic matter, nutrients, bacterial community structure, and the performance of microbial fuel cells

Microbial fuel cells (MFCs) offer the potential for generating electricity, mitigating greenhouse gas emissions, and bioremediating pollutants through utilization of a plentiful renewable resource: soil organic carbon. We analyzed bacterial community structure, MFC performance, and soil characteristics in different microhabitats within MFCs constructed from agricultural or forest soils in order to determine how soil type and bacterial dynamics influence MFC performance. Our results indicated that MFCs constructed from agricultural soil had power output about 17 times that of forest soil-based MFCs and respiration rates about 10 times higher than forest soil MFCs. Agricultural soil MFCs had lower C:N ratios, polyphenol content, and acetate concentrations than forest soil MFCs. Bacterial community profile data indicate that the bacterial communities at the anode of the high power MFCs were less diverse than in low power MFCs and were dominated by Deltaproteobacteria, Geobacter, and to a lesser extent, Clostridia, while low-power MFC anode communities were dominated by Clostridia. These results suggest that the presence of organic carbon substrate (acetate) was not the major limiting factor in selecting for highly electrogenic bacterial communities, while the quality of available organic matter may have played a significant role in supporting high performing bacterial communities.

Dysgonomonas oryzarvi sp. nov., isolated from a microbial fuel cell

A Gram-stain-negative, non-motile and coccoid- to short-rod-shaped bacterium, designated strain Dy73(T), was isolated from a microbial fuel cell that had been inoculated with rice paddy field soil and fed starch, peptone and fish extract as fuels. On the basis of 16S rRNA gene sequence phylogeny, strain Dy73(T) was affiliated with the genus Dysgonomonas in the phylum Bacteroidetes, and most closely related to Dysgonomonas mossii CCUG 43457(T) with a 16S rRNA gene sequence similarity value of 99.7 %. However, the DNA-DNA relatedness value between strain Dy73(T) and Dysgonomonas mossii CCUG 43457(T) was 34.8%. In addition, strain Dy73(T) was found to be different from other recognized species of the genus Dysgonomonas in taxonomically important traits, including habitat, DNA G+C content, bile resistance and fatty-acid composition. Based on these characteristics, strain Dy73(T) represents a novel species of the genus Dysgonomonas for which the name Dysgonomonas oryzarvi sp. nov. is proposed. The type strain is Dy73(T) ( = JCM 16859(T) = KCTC 5936(T)).

Efficient electricity generation from sewage sludge using biocathode microbial fuel cell

Microbial fuel cells (MFCs) with abiotic cathodes require expensive catalyst (such as Pt) or catholyte (such as hexacynoferrate) to facilitate oxidation reactions. This study incorporated biocathodes into a three-chamber MFC to yield electricity from sewage sludge at maximum power output of 13.2 ± 1.7 W/m(3) during polarization, much higher than those previously reported. After 15 d operation, the total chemical oxygen demand (TCOD) removal and coulombic efficiency (CE) of cell reached 40.8 ± 9.0% and 19.4 ± 4.3%, respectively. The anolyte comprised principally acetate and propionate (minor) as metabolites. The use of biocathodes produced an internal resistance of 36-46 Ω, lower than those reported in literature works, hence yielding higher maximum power density from MFC. The massively parallel sequencing technology, 454 pyrosequencing technique, was adopted to probe microbial community on anode biofilm, with dominant phyla belonging to Proteobacteria (45% of total bacteria), Bacteroidetes (19%), Uncultured bacteria (9%), Actinobacteria (7%), Firmicutes (7%), Chloroflex (7%). At genera level, Rhodoferax, Ferruginibacter, Propionibacterium, Rhodopseudomonas, Ferribacterium, Clostridium, Chlorobaculum, Rhodobacter, Bradyrhizobium were the abundant taxa (relative abundances>2.0%).

Electricity generation and microbial community changes in microbial fuel cells packed with different anodic materials

Four materials, carbon felt cube (CFC), granular graphite (GG), granular activated carbon (GAC) and granular semicoke (GS) were tested as packed anodic materials to seek a potentially practical material for microbial fuel cells (MFCs). The microbial community and its correlation with the electricity generation performance of MFCs were explored. The maximum power density was found in GAC, followed by CFC, GG and GS. In GAC and CFC packed MFCs, Geobacter was the dominating genus, while Azospira was the most populous group in GG. Results further indicated that GAC was the most favorable for Geobacter adherence and growth, and the maximum power densities had positive correlation with the total biomass and the relative abundance of Geobacter, but without apparent correlation with the microbial diversity. Due to the low content of Geobacter in GS, power generated in this system may be attributed to other microorganisms such as Synergistes, Bacteroidetes and Castellaniella.

Enhancement in current density and energy conversion efficiency of 3-dimensional MFC anodes using pre-enriched consortium and continuous supply of electron donors

Using a pre-enriched microbial consortium as the inoculum and continuous supply of carbon source, improvement in performance of a three-dimensional, flow-through MFC anode utilizing ferricyanide cathode was investigated. The power density increased from 170 W/m(3) (1800 mW/m(2)) to 580 W/m(3) (6130 mW/m(2)), when the carbon loading increased from 2.5 g/l-day to 50 g/l-day. The coulombic efficiency (CE) decreased from 90% to 23% with increasing carbon loading. The CEs are among the highest reported for glucose and lactate as the substrate with the maximum current density reaching 15.1A/m(2). This suggests establishment of a very high performance exoelectrogenic microbial consortium at the anode. A maximum energy conversion efficiency of 54% was observed at a loading of 2.5 g/l-day. Biological characterization of the consortium showed presence of Burkholderiales and Rhodocyclales as the dominant members. Imaging of the biofilms revealed thinner biofilms compared to the inoculum MFC, but a 1.9-fold higher power density.

Shewanella oneidensis in a lactate-fed pure-culture and a glucose-fed co-culture with Lactococcus lactis with an electrode as electron acceptor

Bioelectrochemical systems (BESs) employing mixed microbial communities as biocatalysts are gaining importance as potential renewable energy, bioremediation, or biosensing devices. While we are beginning to understand how individual microbial species interact with an electrode as electron donor, little is known about the interactions between different microbial species in a community: sugar fermenting bacteria can interact with current producing microbes in a fashion that is either neutral, positively enhancing, or even negatively affecting. Here, we compare the bioelectrochemical performance of Shewanella oneidensis in a pure-culture and in a co-culture with the homolactic acid fermenter Lactococcus lactis at conditions that are pertinent to conventional BES operation. While S. oneidensis alone can only use lactate as electron donor for current production, the co-culture is able to convert glucose into current with a comparable coulombic efficiency of ∼17%. With (electro)-chemical analysis and transcription profiling, we found that the BES performance and S. oneidensis physiology were not significantly different whether grown as a pure- or co-culture. Thus, the microbes worked together in a purely substrate based (neutral) relationship. These co-culture experiments represent an important step in understanding microbial interactions in BES communities with the goal to design complex microbial communities, which specifically convert target substrates into electricity.

Current production by bacterial communities in microbial fuel cells enriched from wastewater sludge with different electron donors

Electricity production by bacterial communities enriched from wastewater sludge with lactate, succinate, N-acetyl-D-glucosamine (NAG), acetate, formate, and uridine were monitored in dual-chamber microbial fuel cells (MFCs). Stable electricity production was observed after 300 h for communities enriched from lactate, acetate, and formate, while communities enriched with succinate, NAG, and uridine stabilized only after 700 h. The average peak current densities and maximum power densities generated from bacterial consortia were significantly higher than those generated from pure cultures of Shewanella oneidensis MR-1. Microbial assemblages were analyzed by DGGE, and planktonic and anode-attached bacterial communities varied as a function of electron donors: Firmicutes, β-Proteobacteria, and Bacteroidetes dominated the planktonic bacterial communities while anode-attached communities consisted mainly of δ-Proteobacteria, β-Proteobacteria, and Firmicutes. Similar bacterial populations were enriched in MFCs fed with lactate, NAG, and uridine and with succinate, acetate, and formate. Cross-feeding experiments with different fuels indicated that enriched microbial consortia were able to utilize a variety of fuel sources and displayed considerable stability, efficiency, and robustness of power generation in comparison to pure cultures. In addition, characterizations of cultivated Shewanella strains suggested that DGGE analysis likely missed active members of exoelectrogenic populations.

Cathodes as electron donors for microbial metabolism: which extracellular electron transfer mechanisms are involved?

This review illuminates extracellular electron transfer mechanisms that may be involved in microbial bioelectrochemical systems with biocathodes. Microbially-catalyzed cathodes are evolving for new bioprocessing applications for waste(water) treatment, carbon dioxide fixation, chemical product formation, or bioremediation. Extracellular electron transfer processes in biological anodes, were the electrode serves as electron acceptor, have been widely studied. However, for biological cathodes the question remains: what are the biochemical mechanisms for the extracellular electron transfer from a cathode (electron donor) to a microorganism? This question was approached by not only analysing the literature on biocathodes, but also by investigating known extracellular microbial oxidation reactions in environmental processes. Here, it is predicted that in direct electron transfer reactions, c-type cytochromes often together with hydrogenases play a critical role and that, in mediated electron transfer reactions, natural redox mediators, such as PQQ, will be involved in the bioelectrochemical reaction. These mechanisms are very similar to processes at the bioanode, but the components operate at different redox potentials. The biocatalyzed cathode reactions, thereby, are not necessarily energy conserving for the microorganism.

Electricity generation and microbial community response to substrate changes in microbial fuel cell

The effect of substrate changes on the performance and microbial community of two-chamber microbial fuel cells (MFCs) was investigated in this study. The MFCs enriched with a single substrate (e.g., acetate, glucose, or butyrate) had different acclimatization capability to substrate changes. The MFC enriched with glucose showed rapid and higher power generation, when glucose was switched with acetate or butyrate. However, the MFC enriched with acetate needed a longer adaptation time for utilizing glucose. Microbial community was also changed when the substrate was changed. Clostridium and Bacilli of phylum Firmicutes were detected in acetate-enriched MFCs after switching to glucose. By contrast, Firmicutes completely disappeared and Geobacter-like species were specifically enriched in glucose-enriched MFCs after feeding acetate to the reactor. This study further suggests that the type of substrate fed to MFC is a very important parameter for reactor performance and microbial community, and significantly affects power generation in MFCs.

Anaerobic degradation of linear alkylbenzene sulfonate (LAS) in fluidized bed reactor by microbial consortia in different support materials

Four anaerobic fluidized bed reactors filled with activated carbon (R1), expanded clay (R2), glass beads (R3) and sand (R4) were tested for anaerobic degradation of LAS. All reactors were inoculated with sludge from a UASB reactor treating swine wastewater and were fed with a synthetic substrate supplemented with approximately 20 mg l(-1) of LAS, on average. To 560 mg l(-1) COD influent, the maximum COD and LAS removal efficiencies were mean values of 97+/-2% and 99+/-2%, respectively, to all reactors demonstrating the potential applicability of this reactor configuration for treating LAS. The reactors were kept at 30 degrees C and operated with a hydraulic retention time (HRT) of 18h. The use of glass beads and sand appear attractive because they favor the development of biofilms capable of supporting LAS degradation. Subsequent 16S rRNA gene sequencing and phylogenetic analysis of samples from reactors R3 and R4 revealed that these reactors gave rise to broad microbial diversity, with microorganisms belonging to the phyla Bacteroidetes, Firmicutes, Actinobacteria and Proteobacteria, indicating the role of microbial consortia in degrading the surfactant LAS.

A rapid methodology using fatty acid methyl esters to profile bacterial community structures in microbial fuel cells

A new methodology is presented here as an effective, preliminary technique for the identification of indigenous aerobic and facultatively anaerobic bacterial communities found within microbial fuel cells (MFCs). The dual-phased method, named Rapid Agitation Static Incubation-Microbial Identification, or RASI-MIDI, is comprised of rapidly agitating the sample within a SLYM-BART tester followed by stationary incubation which produces a biomass that is subjected to extraction of methyl ester fatty acids. These distinctive fatty acid profiles represent a bacterial community fingerprint unique to the MFC, and are stored in a library for analysis. A total of 84 samples were analyzed for bacterial community structures from seven different groups of MFCs, with each MFC group comprised of a different bacterial community. Results showed that comparisons of replicate MFCs comprising the same bacterial communities generated high similarity index (SI) numbers (SI values ranging from 0.77 to 0.97), indicating highly correlated fatty acid profiles. In contrast, comparisons of MFCs having known dissimilar community structures did not consistently generate SI values in the analysis considered to be a significant match. It was found that this protocol described herein uniquely and accurately produced MFC fatty acid profiles contained in bacterial communities and thus provides a potential method for routinely studying MFC bacterial community fingerprints.

Generation of electricity and analysis of microbial communities in wheat straw biomass-powered microbial fuel cells

Electricity generation from wheat straw hydrolysate and the microbial ecology of electricity-producing microbial communities developed in two-chamber microbial fuel cells (MFCs) were investigated. The power density reached 123 mW/m(2) with an initial hydrolysate concentration of 1,000 mg chemical oxygen demand (COD)/liter, while coulombic efficiencies ranged from 37.1 to 15.5%, corresponding to the initial hydrolysate concentrations of 250 to 2,000 mg COD/liter. The suspended bacteria found were different from the bacteria immobilized in the biofilm, and they played different roles in electricity generation from the hydrolysate. The bacteria in the biofilm were consortia with sequences similar to those of Bacteroidetes (40% of sequences), Alphaproteobacteria (20%), Bacillus (20%), Deltaproteobacteria (10%), and Gammaproteobacteria (10%), while the suspended consortia were predominately Bacillus (22.2%). The results of this study can contribute to improving understanding of and optimizing electricity generation in microbial fuel cells.

Sampling natural biofilms: a new route to build efficient microbial anodes

Electrochemically active biofilms were constructed on graphite anodes under constant polarization at -0.1V vs saturated calomel reference (SCE) with 10 mM acetate as substrate. The reactors were inoculated with three different microbial samples that were drawn from exactly the same place in a French Atlantic coastal port (i) by scraping the biofilm that had formed naturally on the surface of a floating bridge, (ii) by taking marine sediments just under the floating bridge, and (iii) by taking nearby beach sand. Current densities of 2.0 A/m2 were reached using the biofilm sample as inoculum while only 0.4 A/m2 and 0.8 A/m2 were obtained using the underlying sediments and the beach sand, respectively. The structure of bacterial communities forming biofilms was characterized by denaturing gradient gel electrophoresis (DGGE) analysis, and revealed differences between samples with the increase in relative intensities of some bands and the appearance of others. Bacteria close related to Bacteroidetes, Halomonas, and Marinobacterium were retrieved only from the efficient EA-biofilms formed from natural biofilms, whereas, bacteria close related to Mesoflavibacter were predominant on biofilm formed from sediments. The marine biofilm was selected as the inoculum to further optimize the microbial anode. Epifluorescence microscopy and SEM confirmed that maintaining the electrode under constant polarization promoted rapid settlement of the electrode surface by a bacterial monolayer film. The microbial anode was progressively adapted to the consumption of acetate by three serial additions of substrate, thus improving the Coulombic efficiency of acetate consumption from 31 to 89%. The possible oxidation of sulfide played only a very small part in the current production and the biofilm was not able to oxidize hydrogen. Graphite proved to be more efficient than dimensionally stable anode (DSA) or stainless steel butthis result might be due to differences in the surface roughness rather than the intrinsic features of the materials. Finally, a maximal current density of 7.9 A/m2 was reached with 10 mM acetate after only 8 days of biofilm formation at -0.1 V/SCE. These results are among the best performance values reported in the literature. Using natural biofilms as inoculum should, consequently, be a new, very promising wayto rapidly build more efficient microbial electrodes than those produced when the inoculum is drawn from bulk environments.

Continuous power generation and microbial community structure of the anode biofilms in a three-stage microbial fuel cell system

A mediator-less three-stage two-chamber microbial fuel cell (MFC) system was developed and operated continuously for more than 1.5 years to evaluate continuous power generation while treating artificial wastewater containing glucose (10 mM) concurrently. A stable power density of 28 W/m(3) was attained with an anode hydraulic retention time of 4.5 h and phosphate buffer as the cathode electrolyte. An overall dissolved organic carbon removal ratio was about 85%, and coulombic efficiency was about 46% in this MFC system. We also analyzed the microbial community structure of anode biofilms in each MFC. Since the environment in each MFC was different due to passing on the products to the next MFC in series, the microbial community structure was different accordingly. The anode biofilm in the first MFC consisted mainly of bacteria belonging to the Gammaproteobacteria, identified as Aeromonas sp., while the Firmicutes dominated the anode biofilms in the second and third MFCs that were mainly fed with acetate. Cyclic voltammetric results supported the presence of a redox compound(s) associated with the anode biofilm matrix, rather than mobile (dissolved) forms, which could be responsible for the electron transfer to the anode. Scanning electron microscopy revealed that the anode biofilms were comprised of morphologically different cells that were firmly attached on the anode surface and interconnected each other with anchor-like filamentous appendages, which might support the results of cyclic voltammetry.

Electrochemical checking of aerobic isolates from electrochemically active biofilms formed in compost

AIMS

To design a cyclic voltammetry (CV) procedure to check the electrochemical activity of bacterial isolates that may explain the electrochemical properties of biofilms formed in compost.

METHODS AND RESULTS

Bacteria catalysing acetate oxidation in garden compost were able to form electrochemically active biofilms by transferring electrons to an electrode under chronoamperometry. They were recovered from the electrode surface and identification of the isolates using 16S rRNA sequencing showed that most of them were Gammaproteobacteria, mainly related to Enterobacter and Pseudomonas spp. A CV procedure was designed to check the electrochemical activity of both groups of isolates. Preliminary CVs suggested that the bacteria were not responsible for the catalysis of acetate oxidation. In contrast, both groups of isolates were found to catalyse the electrochemical reduction of oxygen under experimental conditions that favoured adsorption of the microbial cells on the electrode surface.

CONCLUSIONS

Members of the genera Enterobacter and Pseudomonas were found to be able to catalyse the electrochemical reduction of oxygen.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study has shown the unexpected efficiency of Enterobacter and Pseudomonas spp. in catalysing the reduction of oxygen, suggesting a possible involvement of these species in biocorrosion, or possible application of these strains in designing bio-cathode for microbial fuel cells.

The microbe electric: conversion of organic matter to electricity

Broad application of microbial fuel cells will require substantial increases in current density. A better understanding of the microbiology of these systems may help. Recent studies have greatly expanded the range of microorganisms known to function either as electrode-reducing microorganisms at the anode or as electrode-oxidizing microorganisms at the cathode. Microorganisms that can completely oxidize organic compounds with an electrode serving as the sole electron acceptor are expected to be the primary contributors to power production. Several mechanisms for electron transfer to anodes have been proposed including: direct electron transfer via outer-surface c-type cytochromes, long-range electron transfer via microbial nanowires, electron flow through a conductive biofilm matrix containing cytochromes, and soluble electron shuttles. Which mechanisms are most important depend on the microorganisms and the thickness of the anode biofilm. Emerging systems biology approaches to the study, design, and evolution of microorganisms interacting with electrodes are expected to contribute to improved microbial fuel cells.

A novel ecological role of the Firmicutes identified in thermophilic microbial fuel cells

Significant effort is currently focused on microbial fuel cells (MFCs) as a source of renewable energy. Most studies concentrate on operation at mesophilic temperatures. However, anaerobic digestion studies have reported on the superiority of thermophilic operation and demonstrated a net energy gain in terms of methane yield. As such, our studies focused on MFC operation and microbiology at 55 degrees C. Over a 100-day operation, these MFCs were stable and achieved a power density of 37 mW m(-2) with a coulombic efficiency of 89%. To infer activity and taxonomic identity of dominant members of the electricity-producing community, we performed phylogenetic microarray and clone library analysis with small subunit ribosomal RNA (16S rRNA) and ribosomal RNA gene (16S rDNA). The results illustrated the dominance (80% of clone library sequences) of the Firmicutes in electricity production. Similarly, rRNA sequences from Firmicutes accounted for 50% of those taxa that increased in relative abundance from current-producing MFCs, implying their functional role in current production. We complemented these analyses by isolating the first organisms from a thermophilic MFC. One of the isolates, a Firmicutes Thermincola sp. strain JR, not only produced more current than known organisms (0.42 mA) in an H-cell system but also represented the first demonstration of direct anode reduction by a member of this phylum. Our research illustrates the importance of using a variety of molecular and culture-based methods to reliably characterize bacterial communities. Consequently, we revealed a previously unidentified functional role for Gram-positive bacteria in MFC current generation.

Towards practical implementation of bioelectrochemical wastewater treatment

Bioelectrochemical systems (BESs), such as microbial fuel cells (MFCs) and microbial electrolysis cells (MECs), are generally regarded as a promising future technology for the production of energy from organic material present in wastewaters. The current densities that can be generated with laboratory BESs now approach levels that come close to the requirements for practical applications. However, full-scale implementation of bioelectrochemical wastewater treatment is not straightforward because certain microbiological, technological and economic challenges need to be resolved that have not previously been encountered in any other wastewater treatment system. Here, we identify these challenges, provide an overview of their implications for the feasibility of bioelectrochemical wastewater treatment and explore the opportunities for future BESs.

Survey of bacterial diversity in chronic wounds using pyrosequencing, DGGE, and full ribosome shotgun sequencing

BACKGROUND

Chronic wound pathogenic biofilms are host-pathogen environments that colonize and exist as a cohabitation of many bacterial species. These bacterial populations cooperate to promote their own survival and the chronic nature of the infection. Few studies have performed extensive surveys of the bacterial populations that occur within different types of chronic wound biofilms. The use of 3 separate16S-based molecular amplifications followed by pyrosequencing, shotgun Sanger sequencing, and denaturing gradient gel electrophoresis were utilized to survey the major populations of bacteria that occur in the pathogenic biofilms of three types of chronic wound types: diabetic foot ulcers (D), venous leg ulcers (V), and pressure ulcers (P).

RESULTS

There are specific major populations of bacteria that were evident in the biofilms of all chronic wound types, including Staphylococcus, Pseudomonas, Peptoniphilus, Enterobacter, Stenotrophomonas, Finegoldia, and Serratia spp. Each of the wound types reveals marked differences in bacterial populations, such as pressure ulcers in which 62% of the populations were identified as obligate anaerobes. There were also populations of bacteria that were identified but not recognized as wound pathogens, such as Abiotrophia para-adiacens and Rhodopseudomonas spp. Results of molecular analyses were also compared to those obtained using traditional culture-based diagnostics. Only in one wound type did culture methods correctly identify the primary bacterial population indicating the need for improved diagnostic methods.

CONCLUSION

If clinicians can gain a better understanding of the wound's microbiota, it will give them a greater understanding of the wound's ecology and will allow them to better manage healing of the wound improving the prognosis of patients. This research highlights the necessity to begin evaluating, studying, and treating chronic wound pathogenic biofilms as multi-species entities in order to improve the outcomes of patients. This survey will also foster the pioneering and development of new molecular diagnostic tools, which can be used to identify the community compositions of chronic wound pathogenic biofilms and other medical biofilm infections.

Characterization of a filamentous biofilm community established in a cellulose-fed microbial fuel cell

BACKGROUND

Microbial fuel cells (MFCs) are devices that exploit microorganisms to generate electric power from organic matter. Despite the development of efficient MFC reactors, the microbiology of electricity generation remains to be sufficiently understood.

RESULTS

A laboratory-scale two-chamber microbial fuel cell (MFC) was inoculated with rice paddy field soil and fed cellulose as the carbon and energy source. Electricity-generating microorganisms were enriched by subculturing biofilms that attached onto anode electrodes. An electric current of 0.2 mA was generated from the first enrichment culture, and ratios of the major metabolites (e.g., electric current, methane and acetate) became stable after the forth enrichment. In order to investigate the electrogenic microbial community in the anode biofilm, it was morphologically analyzed by electron microscopy, and community members were phylogenetically identified by 16S rRNA gene clone-library analyses. Electron microscopy revealed that filamentous cells and rod-shaped cells with prosthecae-like filamentous appendages were abundantly present in the biofilm. Filamentous cells and appendages were interconnected via thin filaments. The clone library analyses frequently detected phylotypes affiliated with Clostridiales, Chloroflexi, Rhizobiales and Methanobacterium. Fluorescence in-situ hybridization revealed that the Rhizobiales population represented rod-shaped cells with filamentous appendages and constituted over 30% of the total population.

CONCLUSION

Bacteria affiliated with the Rhizobiales constituted the major population in the cellulose-fed MFC and exhibited unique morphology with filamentous appendages. They are considered to play important roles in the cellulose-degrading electrogenic community.

Comparison of anode bacterial communities and performance in microbial fuel cells with different electron donors

Microbial fuel cells (MFCs) harness the electrochemical activity of certain microbes for the production of electricity from reduced compounds. Characterizations of MFC anode biofilms have collectively shown very diverse microbial communities, raising ecological questions about competition and community succession within these anode-reducing communities. Three sets of triplicate, two-chamber MFCs inoculated with anaerobic sludge and differing in energy sources (acetate, lactate, and glucose) were operated to explore these questions. Based on 16S rDNA-targeted denaturing gradient gel electrophoresis (DGGE), all anode communities contained sequences closely affiliated with Geobacter sulfurreducens (>99% similarity) and an uncultured bacterium clone in the Bacteroidetes class (99% similarity). Various other Geobacter-like sequences were also enriched in most of the anode biofilms. While the anode communities in replicate reactors for each substrate generally converged to a reproducible community, there were some variations in the relative distribution of these putative anode-reducing Geobacter-like strains. Firmicutes were found only in glucose-fed MFCs, presumably serving the roles of converting complex carbon into simple molecules and scavenging oxygen. The maximum current density in these systems was negatively correlated with internal resistance variations among replicate reactors and, likely, was only minimally affected by anode community differences in these two-chamber MFCs with high internal resistance.

Challenges in microbial fuel cell development and operation

A microbial fuel cell (MFC) is a device that converts chemical energy into electricity through the catalytic activities of microorganisms. Although there is great potential of MFCs as an alternative energy source, novel wastewater treatment process, and biosensor for oxygen and pollutants, extensive optimization is required to exploit the maximum microbial potential. In this article, the main limiting factors of MFC operation are identified and suggestions are made to improve performance.

Assay for adhesion and agar invasion in S. cerevisiae

Yeasts are found in natural biofilms, where many microorganisms colonize surfaces. In artificial environments, such as surfaces of man-made objects, biofilms can reduce industrial productivity, destroy structures, and threaten human life. 1-3 On the other hand, harnessing the power of biofilms can help clean the environment and generate sustainable energy. 4-8 The ability of S. cerevisiae to colonize surfaces and participate in complex biofilms was mostly ignored until the rediscovery of the differentiation programs triggered by various signaling pathways and environmental cues in this organism. 9, 10 The continuing interest in using S. cerevisiae as a model organism to understand the interaction and convergence of signaling pathways, such as the Ras-PKA, Kss1 MAPK, and Hog1 osmolarity pathways, quickly placed S. cerevisiae in the junction of biofilm biology and signal transduction research. 11-20 To this end, differentiation of yeast cells into long, adhesive, pseudohyphal filaments became a convenient readout for the activation of signal transduction pathways upon various environmental changes. However, filamentation is a complex collection of phenotypes, which makes assaying for it as if it were a simple phenotype misleading. In the past decade, several assays were successfully adopted from bacterial biofilm studies to yeast research, such as MAT formation assays to measure colony spread on soft agar and crystal violet staining to quantitatively measure cell-surface adherence. 12, 21 However, there has been some confusion in assays developed to qualitatively assess the adhesive and invasive phenotypes of yeast in agar. Here, we present a simple and reliable method for assessing the adhesive and invasive quality of yeast strains with easy-to-understand steps to isolate the adhesion assessment from invasion assessment. Our method, adopted from previous studies, 10, 16 involves growing cells in liquid media and plating on differential nutrient conditions for growth of large spots, which we then wash with water to assess adhesion and rub cells completely off the agar surface to assess invasion into the agar. We eliminate the need for streaking cells onto agar, which affects the invasion of cells into the agar. In general, we observed that haploid strains that invade agar are always adhesive, yet not all adhesive strains can invade agar medium. Our approach can be used in conjunction with other assays to carefully dissect the differentiation steps and requirements of yeast signal transduction, differentiation, quorum sensing, and biofilm formation.