Polymeric micelles for drug delivery

Preparation and characterization of a hydroxypropyl methylcellulose based wafer for simultaneous delivery of phenytoin and insulin as wound dressing material

In this study, a novel wafer based on Hydroxypropyl methylcellulose (HPMC) was prepared as a wound dressing for the simultaneous delivery of phenytoin (PT) and insulin; evaluation of the cutaneous wound repair property was performed too. Due to its low water solubility, PT was encapsulated in polymeric micelles (PM) by the film hydration method at different polymer/drug ratios and characterized in terms of particle size (PS), polydispersity index (PdI), zeta potential (ZP), drug loading (DL) %, entrapment efficiency (EE) %, and drug release. Then, the optimized PT loaded PM (PT-PM) was embedded in the wafers prepared from the HPMC polymer, alone or in combination with Carbopol 940 (CB) and xanthan gum (XG). This wafer also contained a fixed amount of insulin (PT-PM-Insulin-wafer). The obtained wafers were evaluated in terms of morphology, water uptake ability, porosity, bioadhesion and hardness features. Finally, the efficacy of the PT-PM-Insulin-wafer was assessed in full-thickness excision wound models. The optimized PT-PM showed the PS of 84.05 ± 1.80 nm, PdI of 0.28 ± 0.22, ZP of -3.38 ± 0.26 mV, DL of 15.63 ± 0.01%, EE of 92.66 ± 0.08%, and the release efficiency of 59.95 ± 0.03%. The results obtained from the XRD studies of PT-PM also demonstrated the transition of the crystalline nature of the PT to the amorphous form, while FTIR studies showed some intermolecular interaction of PT and the Soluplus® copolymer chain. It was also found that the incorporation of XG into HPMC wafers influenced the microstructure, thus increasing the porosity, water uptake ability and bioadhesion. Compared with other groups, the PT-PM-Insulin-wafer group showed the enhancement of wound closure through increasing collagen deposition and re-epithelialization. The present study, therefore, revealed that the PT-PM-Insulin-wafer group might have very promising applications for wound healing.

Microemulsion Based Nanostructures for Drug Delivery

Most of the active pharmaceutical compounds are often prone to display low bioavailability and biological degradation represents an important drawback. Due to the above, the development of a drug delivery system (DDS) that enables the introduction of a pharmaceutical compound through the body to achieve a therapeutic effect in a controlled manner is an expanding application. Henceforth, new strategies have been developed to control several parameters considered essential for enhancing delivery of drugs. Nanostructure synthesis by microemulsions (ME) consist of enclosing a substance within a wall material at the nanoscale level, allowing to control the size and surface area of the resulting particle. This nanotechnology has shown the importance on targeted drug delivery to improve their stability by protecting a bioactive compound from an adverse environment, enhanced bioavailability as well as controlled release. Thus, a lower dose administration could be achieved by minimizing systemic side effects and decreasing toxicity. This review will focus on describing the different biocompatible nanostructures synthesized by ME as controlled DDS for therapeutic purposes.

Sodium Alginate as a Pharmaceutical Excipient: Novel Applications of a Well-known Polymer

Alginates are naturally occurring polymers revealing low toxicity, good biocompatibility and biodegradability, excellent gelling and thickening properties, as well as low production cost and good availability. One of the most important features typical for alginates is the ability to undergo ionotropic gelation which is gel formation process occurring upon the contact with cations. Because of their advantageous properties, alginates have been extensively utilized in food and pharmaceutical industries. In this review the current knowledge regarding the most recent studies involving both popularly applied dosage forms, like tablets or hydrogels, and novel advanced drug delivery systems applied in targeted therapies are summarized and discussed. The presented studies indicate that although sodium alginate is a well-established polymer, it is still widely applied as pharmaceutical excipient and the presented research studies indicate that there are still research areas that can be explored and provide innovation in drug delivery systems.

Recent advances of nanotechnology in the diagnosis and therapy of triple-negative breast cancer (TNBC)

BACKGROUND

The development of advanced treatment of triple-negative breast cancer (TNBC) is the utmost need of an era. TNBC is recognized as the most aggressive, metastatic cancer and the leading cause of mortality in females worldwide. The lack of expression of triple receptors namely, estrogen, progesterone, and human epidermal receptor2 defined TNBC.

OBJECTIVE

The current review introduced the novel biomarkers such as miRNA and family, PD1, EGFR, VEGF, TILs, P53, AR and PI3K, etc. contributed significantly to the prognosis and diagnosis of TNBC. Once diagnosed the utilization advanced approaches available for TNBC because of the limitations of chemotherapy. Novel approaches include lipid-based (liposomes, SLN, NLC, and SNEDDS), polymer-based (micelle, nanoparticles, dendrimers, and quantum dots), advanced nanocarriers such as (exosomes, antibody and peptide-drug conjugates), carbon-based nanocarriers (Carbon nanotubes, and graphene oxide). Lipid-based delivery is used for excellent carriers for hydrophobic drugs, biocompatibility, and lesser systemic toxicities than chemotherapeutic agents. Polymer-based approaches are preferred over lipids for providing longer circulation time, nanosize, high loading efficiency, high linking; avoiding the expulsion of drugs, targeted action, diagnostic and biosensing abilities. Advanced approaches like exosomes, conjugated moieties are preferred over polymeric for possessing potency, high penetrability, biomarkers, and avoiding the toxicity of tissues. Carbon-based gained wide applicability for their unique properties like a versatile carrier, prognostic, diagnostic, sensing, photodynamic, and photothermal characteristics.

CONCLUSION

The survival rate can be increased by utilizing several kinds of biomarkers. The advanced approaches can also be significantly useful in the prognosis and theranostic of triple-negative breast cancer. One of the biggest successes in treating with nanotechnology-based approaches is the marked reduction of systemic toxicity with high therapeutic effectiveness compared with chemotherapy, surgery, etc. The requirements such as prompt diagnosis, longer circulation time, high efficiency, and high potency, can be fulfilled with these nanocarriers.

Nanomedicine from amphiphilizedprodrugs: Concept and clinical translation

Nanomedicines generally consisting of carrier materials with small fractions of active pharmaceutical ingredients (API) have long been used to improve the pharmacokinetics and biodistributions, augment the therapeutic efficacies and mitigate the side effects. Amphiphilizing hydrophobic/hydrophilic drugs to prodrugs capable of self-assembly into well-defined nanostructures has emerged as a facile approach to fabricating nanomedicines because this amphiphilized prodrug (APD) strategy presents many advantages, including minimized use of inert carrier materials, well-characterized prodrug structures, fixed and high drug loading contents, 100% loading efficiency, and burst-free but controlled drug release. This review comprehensively summarizes recent advances in APDs and their nanomedicines, from the rationale and the stimuli-responsive linker chemistry for on-demand drug release to their progress to the clinics, clinical performance of APDs, as well as the challenges and perspective on future development.

Nanoscale Coordination Polymers for Combined Chemotherapy and Photodynamic Therapy of Metastatic Cancer

Combination therapy enhances anticancer efficacy through synergistic effects of different drugs/modalities and can potentially address the challenges in the treatment of metastatic diseases. Here we report the design of carb/pyro nanoscale coordination polymer nanoparticles that carry carboplatin (carb) in the core and the photosensitizer pyrolipid (pyro) on the shell for the treatment of metastatic triple negative breast cancer. Upon light irradiation, carb/pyro generated reactive oxygen species to cause severe cell apoptosis and early calreticulin exposure. Upon intravenous injection and local light irradiation, carb/pyro significantly regressed tumor growth in the 4T1 murine metastatic breast cancer model. When combined with an anti-CD47 antibody, carb/pyro with light irradiation completely eradicated primary and metastatic 4T1 tumors in 50% mice. The anticancer efficacy of carb/pyro was also demonstrated in the CT26 murine colorectal cancer model.

Enhanced topical corticosteroids delivery to the eye: A trade-off in strategy choice

Topical corticosteroids are the primary treatment of ocular inflammation caused by surgery, injury, or other conditions. Drug pre-corneal residence time, drug water solubility, and drug corneal permeability coefficient are the major factors that determine the ocular drug bioavailability after topical administration. Although growing research successfully enhanced local delivery of corticosteroids utilizing various strategies, rational and dynamic approaches to strategy selection are still lacking. Within this review, an overview of the various strategies as well as their performance in retention, solubility, and permeability coefficient of corticosteroids are provided. On this basis, the tradeoff of strategy selection is discussed, which may shed light on the rational choice and application of ophthalmic delivery enhancement strategies.

Hydrogen Bond Strength-Mediated Self-Assembly of Supramolecular Nanogels for Selective and Effective Cancer Treatment

This study provides a significant contribution to the development of multiple hydrogen-bonded supramolecular nanocarrier systems by demonstrating that controlling the hydrogen bond strength within supramolecular polymers represents a crucial factor to tailor the drug delivery performance and enhance the effectiveness of cancer therapy. Herein, we successfully developed two kinds of poly(ethylene glycol)-based telechelic polymers Cy-PEG and UrCy-PEG having self-constituted double and quadruple hydrogen-bonding cytosine (Cy) and ureido-cytosine (UrCy) end-capped groups, respectively, which directly assemble into spherical nanogels with a number of interesting physical characteristics in aqueous solutions. The UrCy-PEG nanogels containing quadruple hydrogen-bonded UrCy dimers exhibited excellent long-term structural stability in a serum-containing biological medium, whereas the double hydrogen-bonded Cy moieties could not maintain the structural integrity of the Cy-PEG nanogels. More importantly, after the drug encapsulation process, a series of in vitro experiments clearly confirmed that drug-loaded UrCy-PEG nanogels induced selective apoptotic cell death in cancer cells without causing significant cytotoxicity to healthy cells, while drug-loaded Cy-PEG nanogels exerted nonselective cytotoxicity toward both cancer and normal cells, indicating that increasing the strength of hydrogen bonds in nanogels plays a key role in enhancing the selective cellular uptake and cytotoxicity of drugs and the subsequent induction of apoptosis in cancer cells.

Long-acting tunable release of amlodipine loaded PEG-PCL micelles for tailored treatment of chronic hypertension

Hypertension is a chronic condition that requires lifelong therapeutic management. Strict adherence to drug administration timing improves efficacy, while poor adherence leads to safety concerns. In light of these challenges, we present a nanofluidic technology that enables long-acting drug delivery with tunable timing of drug administration using buried gate electrodes in nanochannels. We developed a poly(ethylene glycol) methyl ether-block-poly(ε-caprolactone) (PEG-PCL)-based micellar formulation of amlodipine besylate, a calcium channel blocker for hypertension treatment. The electrostatically charged PEG-PCL micellar formulation enhanced drug solubility and rendered amlodipine responsive to electrostatic release gating in nanochannels for sustained release at clinically relevant therapeutic dose. Using a low-power (<3 VDC) gating potential, we demonstrated tunable release of amlodipine-loaded micelles. Additionally, we showed that the released drug maintained biological activity via calcium ion blockade in vitro. This study represents a proof of concept for the potential applicability of our strategy for chronotherapeutic management of hypertension.

PEGylated phospholipid micelles containing D-α-tocopheryl succinate as multifunctional nanocarriers for enhancing the antitumor efficacy of doxorubicin

The aim of this investigation is to clarify the effect of D-α-tocopheryl succinate (vitamin E succinate, VES) and distearoylphosphatidyl ethanolamine-poly(ethylene glycol) (DSPE-PEG) on the encapsulation and controlled release of doxorubicin (DOX) in nano-assemblies and their consequences on the anti-tumor efficacy of DOX. DOX molecules were successfully loaded into the hybrid micelles with VES and DSPE-PEG (VDPM) via thin-film hydration method, exhibiting a small hydrodynamic particle size (~30 nm) and a weak negative zeta potential of around -5 mv. The obtained DOX-loaded VDPM2 displayed retarded DOX release at pH of 7.4, while substantially accelerated drug release at acidic pH of 5.0. Furthermore, the DOX-loaded VDPM2 exhibited substantially slower drug release rate at pH 7.4 compared with the drug-loaded VDPM1 or DPM preparation, benefiting for decreasing the premature DOX release during blood circulation. In vitro cell experiment indicated that DOX-loaded micelles (DPM, VDPM1 and VDPM2) improved the cellular uptake of DOX in 4T1 and MDA-MB-231 cells. The existence of VES component in the structure of DOX-loaded micelles had no obvious influence on the subcellular distribution of the encapsulated DOX molecules. Furthermore, the DOX-loaded VDPM2 exhibited more pronounced cytotoxicity to 4T1 and MDA-MB-231 cancerous cells compared with DOX-loaded DPM and free DOX solution. The hybrid nanocarriers including VES and DSPE-PEG selectively induced intracellular ROS accumulation and increased level of cytoplasmic calcium ion in cancerous cells by interacting with mitochondria and endoplasmic reticulum, bringing about the improved cytotoxicity of DOX. In vivo antitumor efficacy investigation of DOX-loaded VDPM2 against 4T1 xenograft-bearing mice displayed satisfied therapeutic activity with negligible systemic toxicity, as evidenced by the histological analysis and change of body weight. The proposed DOX-loaded VDPM preparation, as a mulifunctional chemotherapeutic nanomedicine system, holds great potential and bright prospect for clinical tumor therapy.

Development of dexamethasone-loaded mixed polymeric micelles for nasal delivery

Our study aimed to formulate a novel dexamethasone (DXM)-loaded, mixed polymeric micelle-based drug delivery system, focusing on the auspicious nose-to-brain pathway, as a key delivery route to treat central nervous system (CNS) associated diseases. Polymeric micelles might be a solution to deliver drugs to the place of action compared to conventional formulations. Due to low Z-average (89.92 ± 2.7 nm), a polydispersity index of 0.216 ± 0.014 and high surface polarity (52.23%), a significant increase in water solubility (14-fold) was experienced. This increase resulted in favourable dissolution profile at nasal and axonal conditions with high in vitro permeability value (14.6×10^-6 cm/s) on polar brain (porcine) lipid extract. Modified Side-bi-side® type diffusion study confirmed rapid and efficient passive diffusion through the nasal mucosa contributed by strong mucoadhesive properties. The final formulation met all the requirements of a nasal drug delivery system with rapid onset of action, meaning DXM can reach the CNS and there it can exert its beneficial effects in pathological conditions.

Continuous processing of paclitaxel polymeric micelles

A continuous polymeric micelle processing platform was successfully developed, which eliminated batch-to-batch variation in critical quality attributes (for example, size and polydispersity that are typically associated with batch processing). A continuous precipitation process was achieved via coaxial turbulent jet in co-flow technology allowing precise control of particle size with average particle size in the range 15 to 70 nm and low polydispersity. Critical relationships between material attributes (e.g., block copolymer design), process parameters (e.g., polymer concentration, organic to aqueous flow rate ratios, and temperature), and critical quality attributes (e.g., size and polydispersity) of the polymeric micelles were realized via multiple designs of experiments studies. Both polymer molecular weight and concentration were shown to influence the micelle polydispersity index. Notably, higher molecular weight polymer required higher processing temperatures to produce monodispersed particles and were generally of larger size. Using optimized conditions, paclitaxel polymeric micelles that are qualitatively and quantitatively equivalent to commercial Genexol PM were produced, exhibiting comparable quality attributes including particle size, size distribution, morphology, drug loading, release characteristics, and stability. Lastly, a dynamic light scattering method was adapted to determine the critical micelle concentration and aggregation number of the block copolymers, providing useful information about the raw material.

Mercury-containing supramolecular micelles with highly sensitive pH-responsiveness for selective cancer therapy

Construction and manipulation of metal-based supramolecular polymers-which are based on a combination of nucleobase hydrogen bonding interactions and functional metal ions-to obtain the desired physicochemical properties and achieve the efficacy and safety required for biomedical applications remain extremely challenging. We successfully designed and synthesized a new mercury-based supramolecular polymer, Hg-BU-PPG, containing an oligomeric polypropylene glycol backbone and pH-sensitive uracil-mercury-uracil (U-Hg-U) linkages. This multifunctional metallo-supramolecular material spontaneously self-organizes into nanosized spherical micelles in aqueous solution. The micelles possess several attractive properties, including desired long-term structural stability in serum-rich conditions, unique fluorescence behavior and highly sensitive, well-controlled pH-responsiveness. Interestingly, Hg-BU-PPG micelles exhibited strong, selective cytotoxic effects towards cancer cells in vitro, without harming normal cells. The highly selective cytotoxicity can be attributed to rapid dissociation of the U-Hg-U complexes within the micelles in the mildly acidic intracellular pH of cancer cells, followed by release of inherently toxic mercury ions. Importantly, fluorescence microscopy and flow cytometry clearly demonstrated that Hg-BU-PPG selectively entered the cancer cells via endocytosis and rapidly promoted massive apoptotic cell death. In contrast, internalization of Hg-BU-PPG by normal cells was limited, resulting in high biocompatibility and no cytotoxic effects. Thus, this newly discovered 'cytotoxicity-concealing' supramolecular system could represent a viable route to enhance the safety and efficacy of cancer therapy and bioimaging via a strategy that does not require incorporation of anticancer drugs and fluorescent probes. STATEMENT OF SIGNIFICANCE: We report a significant breakthrough in the construction of mercury-containing supramolecular polymers, namely the creation of multifunctional micelles with unique chemical and physical properties conferred by pH-sensitive uracil-mercury-uracil (U-Hg-U) linkages and tunable structural and dynamical features due to the presence of hydrogen-bonded uracil moieties. Importantly, in vitro experiments clearly demonstrated that introduction of the U-Hg-U complexes into the micelles not only improved the efficiency of selective uptake via endocytosis into cancer cells, but also accelerated the induction of massive apoptotic cell death. Thus, this work provides crucial new insight for the development of metallo-supramolecular polymeric micelles that may substantially enhance the safety and efficacy of cancer therapy and bioimaging without requiring incorporation of anticancer drugs or fluorescent probes.

Self-assemblies of pluronic micelles in partitioning of anticancer drugs and effectiveness of this system towards target protein

Micelles formed by pluronic triblock copolymers are known to be a promising class of drug delivery vehicles. Quantitative mechanistic insights into the ability of pluronic micelles to improve the solubility of poorly water soluble drugs, encapsulation and delivery of hydrophilic drugs are not available. The current study evaluated the energetics of encapsulation of chemotherapeutic drugs gemcitabine, cytarabine, and hydroxyurea in pluronic F127 and F68 micelles. In addition, the interactions of the drugs released from pluronic micellar media with serum albumin, which is a major circulatory transport protein, and subsequent conformational changes have also been analyzed with the help of calorimetry and spectroscopy. All the drugs showed improved partitioning in F127 micelles, the extent of which slightly increased with temperature rise. Interestingly, drug–protein binding is enhanced upon delivery from pluronic micelles without affecting the conformational integrity of the protein. This study highlights the role of drug functionalities, hydrophobicity, and steric factors towards their partitioning in pluronic micelles. Such studies are important in understanding physicochemical aspects of drug encapsulation and release, and lead to establishing structure–property–energetics correlations for developing suitable nano-drug delivery vehicles.

Micelles formed by pluronic triblock copolymers are known to be a promising class of drug delivery vehicles.

Polymeric micelle formulations for the cutaneous delivery of sirolimus: A new approach for the treatment of facial angiofibromas in tuberous sclerosis complex

Facial angiofibromas are benign tumors characteristic of tuberous sclerosis complex. The disease involves the mTOR pathway and the cutaneous manifestation responds to topical treatment with sirolimus (SIR). However, there are no approved topical SIR products and extemporaneous formulations have been sub-optimal. The aims of this study were (i) to develop aqueous formulations of SIR loaded in polymeric micelles prepared using D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) and (ii) to use the cutaneous biodistribution method, in conjunction with a new statistical approach, to investigate the feasibility of SIR delivery to the viable epidermis. Optimized micelle solutions and hydrogels (0.2%) were developed and stable at 4 °C for at least 6 and 3 months, respectively. Cutaneous delivery experiments (infinite and finite dose) using porcine skin demonstrated that both formulations increased SIR cutaneous bioavailability as compared to the control (ointment 0.2%). Moreover, studies with the micellar hydrogel 0.2% demonstrated SIR deposition in the viable epidermis with no transdermal permeation. These encouraging results confirmed that polymeric micelles enabled development of aqueous SIR formulations capable of targeted epidermal delivery. Furthermore, the cutaneous biodistribution provided a detailed insight into drug bioavailability in the different skin compartments that could complement/explain clinical observations of formulation efficacy.

Design and Development of D‒α‒Tocopheryl Polyethylene Glycol Succinate‒block‒Poly(ε-Caprolactone) (TPGS-b-PCL) Nanocarriers for Solubilization and Controlled Release of Paclitaxel

The objective of this study was to synthesize and characterize a set of biodegradable block copolymers based on TPGS-block-poly(ε-caprolactone) (TPGS-b-PCL) and to assess their self-assembled structures as a nanodelivery system for paclitaxel (PAX). The conjugation of PCL to TPGS was hypothesized to increase the stability and the drug solubilization characteristics of TPGS micelles. TPGS-b-PCL copolymer with various PCL/TPGS ratios were synthesized via ring opening bulk polymerization of ε-caprolactone using TPGS, with different molecular weights of PEG (1–5 kDa), as initiators and stannous octoate as a catalyst. The synthesized copolymers were characterized using ¹H NMR, GPC, FTIR, XRD, and DSC. Assembly of block copolymers was achieved via the cosolvent evaporation method. The self-assembled structures were characterized for their size, polydispersity, and CMC using dynamic light scattering (DLS) technique. The results from the spectroscopic and thermal analyses confirmed the successful synthesis of the copolymers. Only copolymers that consisted of TPGS with PEG molecular weights ≥ 2000 Da were able to self-assemble and form nanocarriers of ≤200 nm in diameter. Moreover, TPGS₂₀₀₀-b-PCL₄₀₀₀, TPGS₃₅₀₀-b-PCL₇₀₀₀, and TPGS₅₀₀₀-b-PCL₁₅₀₀₀ micelles enhanced the aqueous solubility of PAX from 0.3 µg/mL up to 88.4 ug/mL in TPGS₅₀₀₀-b-PCL₁₅₀₀₀. Of the abovementioned micellar formulations, TPGS₅₀₀₀-b-PCL₁₅₀₀₀ showed the slowest in vitro release of PAX. Specifically, the PAX-loaded TPGS₅₀₀₀-b-PCL₁₅₀₀₀ micellar formulation showed less than 10% drug release within the first 12 h, and around 36% cumulative drug release within 72 h compared to 61% and 100% PAX release, respectively, from the commercially available formulation (Ebetaxel^®) at the same time points. Our results point to a great potential for TPGS-b-PCL micelles to efficiently solubilize and control the release of PAX.

Human respiratory viral infections: Current status and future prospects of nanotechnology-based approaches for prophylaxis and treatment

Respiratory viral infections are major cause of highly mortal pandemics. They are impacting socioeconomic development and healthcare system globally. These emerging deadly respiratory viruses develop newer survival strategies to live inside host cells and tricking the immune system of host. Currently, medical facilities, therapies and research -development teams of every country kneel down before novel corona virus (SARS-CoV-2) which claimed ~2,828,629 lives till date. Thus, there is urgent requirement of novel treatment strategies to combat against these emerging respiratory viral infections. Nanocarriers come under the umbrella of nanotechnology and offer numerous benefits compared to traditional dosage forms. Further, unique physicochemical properties (size, shape and surface charge) of nanocarriers provide additional advantage for targeted delivery. This review discusses in detail about the respiratory viruses, their transmission mode and cell invasion pathways, survival strategies, available therapies, and nanocarriers for the delivery of therapeutics. Further, the role of nanocarriers in the development of treatment therapy against SARS-CoV-2 is also overviewed.

Non-invasive optical imaging of retinal Aβ plaques using curcumin loaded polymeric micelles in APPswe/PS1ΔE9 transgenic mice for the diagnosis of Alzheimer's disease

Alzheimer's disease (AD) is a neurodegenerative disease clinically characterized by impaired memory and progressive cognitive decline. Despite the advances in AD research, an effective method to timely diagnose AD has remained elusive, and until now, most AD patients receive the available symptomatic treatments late. Although the pathological hallmarks of AD have been traditionally described in the brain, recent studies have shown similar pathological changes in the retina which is developmentally an extension of the forebrain. Interestingly, retinal beta-amyloid (Aβ) accumulation preceded that of the brain in a transgenic mouse model of AD. In the quest of finding an early reliable biomarker for AD, researchers have targeted the optical imaging of retinal Aβ plaques as a method of diagnosing AD. One promising polyphenol compound that has found application in this area is curcumin due to its natural binding affinity to Aβ fibrils and oligomers while giving out a strong fluorescence signal. However, the clinical applications of curcumin have been difficult due to problems related to its bioavailability and retention in the body since it is a hydrophobic molecule. To address these limitations, we herein report the development of anionic and water-soluble DSPE-PEG2000 curcumin polymeric micelles (also referred to as curcumin micelles) that can label both brain and retinal Aβ plaques ex vivo. Following their intravitreal injection in the APPswe/PS1ΔE9 transgenic mouse model of AD, green-labeled retinal deposits were optically imaged live using a rodent retinal microscope. Furthermore, these micelles had excellent intraocular biocompatibility, low hemolytic ratio, and were safe for use in two key retinal cell lines (ARPE-19 and 661W cells). Taken together, these findings provide an alternative insight into the optical imaging of Aβ plaques for the diagnosis of AD using the eyes. More importantly, this study can be translated to humans in the future to improve on early diagnosis and timely management of the disease.

Polymeric micelles in drug delivery: An insight of the techniques for their characterization and assessment in biorelevant conditions

Polymeric micelles, i.e. aggregation colloids formed in solution by self-assembling of amphiphilic polymers, represent an innovative tool to overcome several issues related to drug administration, from the low water-solubility to the poor drug permeability across biological barriers. With respect to other nanocarriers, polymeric micelles generally display smaller size, easier preparation and sterilization processes, and good solubilization properties, unfortunately associated with a lower stability in biological fluids and a more complicated characterization. Particularly challenging is the study of their interaction with the biological environment, essential to predict the real in vivo behavior after administration. In this review, after a general presentation on micelles features and properties, different characterization techniques are discussed, from the ones used for the determination of micelles basic characteristics (critical micellar concentration, size, surface charge, morphology) to the more complex approaches used to figure out micelles kinetic stability, drug release and behavior in the presence of biological substrates (fluids, cells and tissues). The techniques presented (such as dynamic light scattering, AFM, cryo-TEM, X-ray scattering, FRET, symmetrical flow field-flow fractionation (AF4) and density ultracentrifugation), each one with their own advantages and limitations, can be combined to achieve a deeper comprehension of polymeric micelles in vivo behavior. The set-up and validation of adequate methods for micelles description represent the essential starting point for their development and clinical success.

Pharmacokinetic and Tissue Distribution of Orally Administered Cyclosporine A-Loaded poly(ethylene oxide)-block-Poly(ε-caprolactone) Micelles versus Sandimmune® in Rats

PURPOSE

We have previously reported on a polymeric micellar formulation of Cyclosporine A (CyA) based on poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO_5K-b-PCL_13K) capable of changing drug biodistribution and pharmacokinetic profile following intravenous administration. The objective of the present study was to explore the potential of this formulation in changing the tissue distribution and pharmacokinetics of the encapsulated CyA following oral administration making comparisons with Sandimmune®.

METHODS

The in vitro CyA release and stability CyA-loaded PEO-b-PCL micelles (CyA-micelles) were evaluated in biorelevant media. The pharmacokinetics and tissue distribution of orally administered CyA-micelles or Sandimmune® and tissue distribution of traceable Cyanine-5.5 (Cy5.5)-conjugated PEO-b-PCL micelles were then investigated in healthy rats.

RESULTS

CyA-micelles showed around 60-70% CyA release in simulated intestinal and gastric fluids within 24 h, while Sandimmune® released its entire CyA content in the simulated intestinal fluid. CyA-micelles and Sandimmune® showed similar pharmacokinetics, but different tissue distribution profile in rats. In particular, the calculated AUC for CyA-micelles was higher in liver, comparable in heart, and lower in spleen, lungs, and kidneys when compared to that for Sandimmune®.

CONCLUSIONS

The results point to the influence of excipients in Sandimmune® on CyA disposition and more inert nature of PEO-b-PCL micelles in defining CyA biological interactions.

Electrochemical Stimulation of Water-Oil Interfaces by Nonionic-Cationic Block Copolymer Systems

Variable interfacial tension could be desirable for many applications. Beyond classical stimuli like temperature, we introduce an electrochemical approach employing polymers. Hence, aqueous solutions of the nonionic-cationic block copolymer poly(ethylene oxide)₁₁₄-b-poly{[2-(methacryloyloxy)ethyl]diisopropylmethylammonium chloride}₁₇₁ (i.e., PEO₁₁₄-b-PDPAEMA₁₇₁ with a quaternized poly(diisopropylaminoethyl methacrylate) block) were investigated by emerging drop measurements and dynamic light scattering, analyzing the PEO₁₁₄-b-qPDPAEMA₁₇₁ impact on the interfacial tension between water and n-decane and its micellar formation in the aqueous bulk phase. Potassium hexacyanoferrates (HCFs) were used as electroactive complexants for the charged block, which convert the bishydrophilic copolymer into amphiphilic species. Interestingly, ferricyanides ([Fe(CN)₆]^3-) act as stronger complexants than ferrocyanides ([Fe(CN)₆]^4-), leading to an insoluble qPDPAEMA block in the presence of ferricyanides. Hence, bulk micellization was demonstrated by light scattering. Due to their addressability, in situ redox experiments were performed to trace the interfacial tension under electrochemical control, directly utilizing a drop shape analyzer. Here, the open-circuit potential (OCP) was changed by electrolysis to vary the ratio between ferricyanides and ferrocyanides in the aqueous solution. While a chemical oxidation/reduction is feasible, also an electrochemical oxidation leads to a significant change in the interfacial tension properties. In contrast, a corresponding electrochemical reduction showed only a slight response after converting ferricyanides to ferrocyanides. Atomic force microscopy (AFM) images of the liquid/liquid interface transferred to a solid substrate showed particles that are in accordance with the diameter from light scattering experiments of the bulk phase. In conclusion, the present results could be an important step toward economic switching of interfaces suitable, e.g., for emulsion breakage.

Nano-based drug delivery optimization for tuberculosis treatment: A review

Regardless of advanced technology and innovation, infectious diseases continue to be one of the extreme health challenges in modern world. Tuberculosis (TB) is one of the top ten causes of deaths worldwide and the leading cause of death from a single infectious agent. The conventional TB drug therapy requires a long term treatment with frequent and multiple drug dosing with a stiff administration schedule, which results in low patient compliance. This eventually leads to the recurrence of the infection and the emergence of multiple drug resistance. Hence, there is an urgent need to develop more successful and effective strategies to overcome the problems of drug resistance, duration of treatment course and devotion to treatment. Nanotechnology has considerable potential for diagnosis, treatment and prevention of infectious diseases including TB. The main advantages of nanoparticles to be used as drug carriers are their small size, high stability, enhanced delivery of hydrophilic and hydrophobic drugs, intracellular delivery of macromolecules, targeted delivery of drugs to specific cells or tissues, and the feasibility of various drug administration routes. Moreover, these carriers are adapted to facilitate controlled, slow, and persistent drug release from the matrix. Above properties of nanoparticles permit the improvement of drug bioavailability and reduction of dosing frequency and may reduce the toxicity and resolve the problem of low adherence to the prescribed therapy. In this review, various types of nanocarriers have been evaluated as promising drug delivery systems for different administration routes and main research outcomes in this area have been discussed.

Voriconazole Ternary Micellar Systems for the Treatment of Ocular Mycosis: Statistical Optimization and In Vivo Evaluation

Voriconazole (VRC) is a broad spectrum, second generation triazole antifungal. The main use of VRC is via the oral and intravenous route. The study aimed to formulate VRC into ternary micellar systems (TMSs) for the topical treatment of ocular mycosis. TMSs were successfully prepared by water addition/solvent evaporation method, applying a 3-factor D-optimal design. The numerical optimization process suggested an optimal formula (OTMS) composed of total Pluronics to drug weight ratio of 22.89: 1, 1:1 weight ratio of Pluronic® P123 and F68, and 2% w/v of Labrasol. OTMS had high solubilization efficiency of 98.0%, small micellar size of 21.8 nm and suitable zeta potential and polydispersity index values of -9.0 mV and 0.261, respectively. OTMS exhibited acceptable stability for 3 months. Transmission electron microscopy demonstrated the spherical morphology of micelles. OTMS was expected to cause no ocular irritation or blurring in vision as reflected by pH and refractive index measurements. The histopathological study revealed the safety of OTMS for ocular use. The fungal susceptibility testing using Candida albicans demonstrated the superiority of OTMS to VRC suspension, with greater and more durable growth inhibition. Therefore, ocular application of optimized VRC-loaded TMSs can be a promising treatment for ocular mycosis.

pH-responsive polymer micelles for methotrexate delivery at tumor microenvironments

Methotrexate (MTX) anticancer drug was successfully loaded and released in a controlled manner from polymer micelles made of a diblock copolymer of poly(monomethoxy ethylene glycol)-b-poly(ε-caprolactone) (mPEG-PCL). The empty and MTX-loaded micelles (MTX/mPEG-PCL) were characterized by electron microscopy. The drug release dependence upon pH 5.4, 6.5, and 7.4 for 30 days was proven and characterized by UV-Vis spectroscopy. The cytotoxic effect of MTX/mPEG-PCL micelles on MCF-7 breast cancer cells was evaluated through an MTT assay. The morphological analysis indicated the successful formation of micelles of 76 and 131 nm for empty and MTX-loaded micelles, respectively. An encapsulation efficiency of 70.2% and a loading capacity of 8.8% were obtained. The in vitro release of MTX showed a gradual and sustained profile over 22 days, with a clear trend to much higher release at acidic pH (80 and 90% for pH 6.7 and 5.5, respectively). The MTX/mPEG-PCL micelles showed an IC50 of MCF-7 cells at 30 µg mL−1. The results suggested that MTX/mPEG-PCL could be a promising drug delivery system for cancer treatment.

Immobilization of PR4A3 enzyme in pluronic F127 polymeric micelles against colorectal adenocarcinoma cells and increase of in vitro bioavailability

Traditional therapy for malignant neoplasms involving surgical procedures, radiotherapy and chemotherapy aims to kill neoplastic cells, but also affects normal cells. Therefore, exogenous proteases are the target of studies in cancer therapy, as they have been shown to be effective in suppressing tumors and reducing metastases. Pluronic F127 (F127) is a copolymer of amphiphilic blocks that has shown significant potential for drug administration, as it is capable of incorporating hydrophobic drugs and self-assembling in micrometers of nanometric size. This study investigated the effects of immobilization of the alkaline protease PR4A3 with pluronic F127 micelles on the enzyme-induced cytotoxicity. Protease immobilization was demonstrated through UV-visible and circular dichroism (CD) spectroscopies, as the enzyme interacts with the polymeric micelle of Pluronic F127 without changing its secondary structure. In addition, the immobilized form of the enzyme showed greater bioavailability after passing through the simulated gastrointestinal transit. Cell viability was assessed using the tetrazoic methylthiazole (MTT) assay. The results open perspectives for new research and development for PR4A3 in the treatment of colorectal carcinoma.

In Vitro Cytotoxicity and Cellular Uptake of Tamoxifen Citrate-Loaded Polymeric Micelles

The main intent of this treatise was to encapsulate tamoxifen citrate (TMXC) into polymeric micellar delivery system and evaluate the influence of TMXC-loaded micelles as a promising carrier on the in vitro cytotoxicity and cellular uptake of TMXC in treatment of breast cancer. Different formulae of polymeric micelles loaded with TMXC using mixtures of different Pluronic polymers were fabricated by thin-film hydration method and evaluated for morphology, drug entrapment efficiency, particle size, surface charge, in vitro liberation of TMXC, uptake by cancer cell lines, and cytotoxic effect against breast cancer cell lines such as MCF-7. The optimal TMXC-loaded micelles exhibited nano-sized particles and entrapped about 89.09 ± 4.2% of TMXC. In vitro liberation study revealed an extended TMXC escape of about 70.23 ± 5.9% over a period of 36 h. The optimized TMXC-loaded micelles formula showed enhanced cellular uptake of TMXC by 2.28 folds and showed a significant cytotoxic effect with MCF-7 breast cancer cells compared to TMXC solution. The obtained yield proposed that Pluronic micelles could be a promising potential delivery system for anticancer moieties.

Dissolution of amorphous nifedipine from micelle-forming carboxymethylcellulose derivatives

We show that a novel amphiphilic graft copolymer combining the biodegradability and biocompatibility of oxidized carboxymethylcellulose (CMC) with that of hydrophilic poly(ethylene glycol) (PEG), and hydrophobic dodecylamine (DDA), improves the solubility and dissolution performance of nifedipine (NIF), considered as a model hydrophobic drug. The hydrophobic components of the graft copolymer have the multiple effect of favouring micelle formation and loading. At the same time, the interaction between the hydrophobic core and NIF has the secondary effect to suppress drug crystallization, favouring its dissolution, and to increase photostability. Oxidized CMC-g-PEG-DDA micelles reached values of drug concentration, loading capacity and encapsulation efficiency as high as 340 μg mL^-1, 6.4 % and 34.1 %, respectively. Loaded micelles showed a good stability with a limited release profile at pH 1.2, whereas at pH 7.4 the swollen cores enable much higher and progressive release, that reaches 3.4 and 6.6 % after 3 and 5 h, respectively, corresponding to very competitive concentration of 34 and 66 μg mL^-1.

Development of Self-Associating SN-38-Conjugated Poly(ethylene oxide)-Poly(ester) Micelles for Colorectal Cancer Therapy

The clinical use of 7-ethyl-10-hydroxy-camptothecin (SN-38), which is the active metabolite of irinotecan, has been hampered because of its practical water-insolubility. In this study, we successfully synthesized two self-associating SN-38-polymer drug conjugates to improve the water-solubility of SN-38, while retaining its anticancer activity. The polymeric micellar SN-38 conjugates were composed of either methoxy-poly(ethylene oxide)-block-poly(α-benzyl carboxylate-ε-caprolactone) conjugated to SN-38 at the PBCL end (mPEO-b-PBCL/SN-38) or mPEO-block-poly(α-carboxyl-ε-caprolactone) attached to SN-38 from the pendent-free carboxyl site (mPEO-b-PCCL/SN-38). The chemical structure of block copolymers was confirmed by ¹H NMR. The physicochemical characterizations of their self-assembled structures including size, surface charge, polydispersity, critical micellar concentration, conjugation content and efficiency, morphology, kinetic stability, and in vitro release of SN-38 were compared between the two formulations. In vitro anticancer activities were evaluated by measuring cellular cytotoxicity and caspase activation by MTS and Caspase-Glo 3/7 assays, respectively. The hemolytic activity of both micellar structures against rat red blood cells was also measured. The results showed the formation of SN-38-polymeric micellar conjugates at diameters < 50 nm with a narrow size distribution and sustained release of SN-38 for both structures. The loading content of SN-38 in mPEO-b-PBCL and mPEO-b-PCCL were 11.47 ± 0.10 and 12.03 ± 0.17 (% w/w), respectively. The mPEO-b-PBCL/SN-38, end-capped micelles were kinetically more stable than mPEO-b-PCCL/SN-38. The self-assembled mPEO-b-PBCL/SN-38 and mPEO-b-PCCL/SN-38 micelles resulted in significantly higher cytotoxic effects than irinotecan against human colorectal cancer cell lines HCT116, HT-29, and SW20. The CRC cells were found to be 70-fold to 330-fold more sensitive to micellar SN-38 than irinotecan, on average. Both SN-38-incorporated micelles showed two-fold higher caspase-3/7 activation levels than irinotecan. The mPEO-b-PBCL/SN-38 micelles were not hemolytic, but mPEO-b-PCCL/SN-38 showed some hemolysis. The overall results from this study uphold mPEO-b-PBCL/SN-38 over mPEO-b-PCCL/SN-38 micellar formulation as an effective delivery system of SN-38 that warrants further preclinical investigation.

Polymeric micelles for the delivery of poorly soluble drugs: From nanoformulation to clinical approval

Over the last three decades, polymeric micelles have emerged as a highly promising drug delivery platform for therapeutic compounds. Particularly, poorly soluble small molecules with high potency and significant toxicity were encapsulated in polymeric micelles. Polymeric micelles have shown improved pharmacokinetic profiles in preclinical animal models and enhanced efficacy with a superior safety profile for therapeutic drugs. Several polymeric micelle formulations have reached the clinical stage and are either in clinical trials or are approved for human use. This furthers interest in this field and underscores the need for additional learning of how to best design and apply these micellar carriers to improve the clinical outcomes of many drugs. In this review, we provide detailed information on polymeric micelles for the solubilization of poorly soluble small molecules in topics such as the design of block copolymers, experimental and theoretical analysis of drug encapsulation in polymeric micelles, pharmacokinetics of drugs in polymeric micelles, regulatory approval pathways of nanomedicines, and current outcomes from micelle formulations in clinical trials. We aim to describe the latest information on advanced analytical approaches for elucidating molecular interactions within the core of polymeric micelles for effective solubilization as well as for analyzing nanomedicine's pharmacokinetic profiles. Taking into account the considerations described within, academic and industrial researchers can continue to elucidate novel interactions in polymeric micelles and capitalize on their potential as drug delivery vehicles to help improve therapeutic outcomes in systemic delivery.

Advanced polymeric nanotechnology to augment therapeutic delivery and disease diagnosis

Therapeutic and diagnostic payloads are usually associated with properties that compromise their efficacy, such as poor aqueous solubility, short half-life, low bioavailability, nonspecific accumulation and diverse side effects. Nanotechnological solutions have emerged to circumvent some of these drawbacks, augmenting therapeutic and/or diagnostic outcomes. Nanotechnology has benefited from the rise in polymer science research for the development of novel nanosystems for therapeutic and diagnostic purposes. Polymers are a widely used class of biomaterials, with a considerable number of regulatory approvals for application in clinics. In addition to their versatility in production and functionalization, several synthetic and natural polymers demonstrate biocompatible properties that dictate their successful biological performance. This article highlights the physicochemical characteristics of a variety of natural and synthetic biocompatible polymers, as well as their role in the manufacture of nanotechnology-based systems, state-of-art applications in disease treatment and diagnosis, and current challenges in finding a way to clinics.

The uses of resveratrol for neurological diseases treatment and insights for nanotechnology based-drug delivery systems

Neurological disorders have been growing in recent years and are highly prevalent globally. Resveratrol (RES) is a natural product from plant sources such as grape skins. This compound has shown biological activity in many diseases, in particular, those that act on the central nervous system. The mechanism of action and the key points in neurological disorders were described and show the targeted mechanism of action. Due to the insolubility of this compound; the use of nanotechnology-based systems has been proposed for the incorporation of RES and RES-loaded nanocarriers have been designed for intranasal administration, oral or parenteral routes to deliver it to the brain. In general, these nanosystems have shown to be effective in many studies, pharmacological and pharmacokinetic assays, as well as some cell studies. The outcomes show that RES has been reported in human clinical trials for some neurological diseases, although no studies were performed in humans using nanocarriers, animal and/or cellular models have been reported to show good results regarding therapeutics on neurological diseases. Thus, the use of this nutraceutical has shown true for neurological diseases and its loading into nanocarriers displaying good results on the stability, delivery and targeting to the brain.

Miktoarm Star Polymers: Branched Architectures in Drug Delivery

Delivering active pharmaceutical agents to disease sites using soft polymeric nanoparticles continues to be a topical area of research. It is becoming increasingly evident that the composition of amphiphilic macromolecules plays a significant role in developing efficient nanoformulations. Branched architectures with asymmetric polymeric arms emanating from a central core junction have provided a pivotal venue to tailor their key parameters. The build-up of miktoarm stars offers vast polymer arm tunability, aiding in the development of macromolecules with adjustable properties, and allows facile inclusion of endogenous stimulus-responsive entities. Miktoarm star-based micelles have been demonstrated to exhibit denser coronae, very low critical micelle concentrations, high drug loading contents, and sustained drug release profiles. With significant advances in chemical methodologies, synthetic articulation of miktoarm polymer architecture, and determination of their structure-property relationships, are now becoming streamlined. This is helping advance their implementation into formulating efficient therapeutic interventions. This review brings into focus the important discoveries in the syntheses of miktoarm stars of varied compositions, their aqueous self-assembly, and contributions their formulations are making in advancing the field of drug delivery.

Prodrugs and nanomicelles to overcome ocular barriers for drug penetration

INTRODUCTION

Ocular barriers hinder drug delivery and reduce drug bioavailability. This article focuses on enhancing drug absorption across the corneal and conjunctival epithelium. Both, transporter targeted prodrug formulations and nanomicellar strategy is proven to enhance the drug permeation of therapeutic agents across various ocular barriers. These strategies can increase aqueous drug solubility and stability of many hydrophobic drugs for topical ophthalmic formulations.

AREAS COVERED

The article discusses various ocular barriers, ocular influx, and efflux transporters. It elaborates various prodrug strategies used for enhancing drug absorption. Along with this, the article also describes nanomicellar formulation, its characteristic and advantages, and applications in for anterior and posterior segment drug delivery.

EXPERT OPINION

Prodrugs and nanomicellar formulations provide an effective strategy for improving drug absorption and drug bioavailability across various ocular barriers. It will be exciting to see the efficacy of nanomicelles for treating back of the eye disorders after their topical application. This is considered as a holy grail of ocular drug delivery due to the dynamic and static ocular barriers, restricting posterior entry of topically applied drug formulations.

Self-Assemble Amphiphilic PEO-PPO-PEO Tri-Block Co-Polymeric Methotrexate Nanomicelles to Combat MCF7 Cancer Cells

BACKGROUND

Methotrexate (MTX) is a water-insoluble, anti-tumor agent that causes adverse effects like bone marrow suppression, chronic interstitial obstructive pulmonary disease, hepatotoxicity, leukopenia, interstitial pneumonitis and nephrotoxicity with slow drug release rate.

OBJECTIVE

The present study aimed to successfully incorporate MTX into novel-targeted Pluronic (PEOPPO- PEO tri-block co-polymer) F127 polymeric micelles intended for intravenous administration with improved drug loading and sustained release behavior necessary to achieve better efficacy of MTX.

METHODS

MTX-loaded Pluronic F127 micelles were characterized for critical micelle concentration, particle size and zeta potential,¹H NMR, drug loading, encapsulation efficiency characterization, cell uptake, in vitro release study along with partition coefficient and solubilization thermodynamics.

RESULTS

The micellar formulation resulted in nano size 27.32±1.43nm of PF127/SDS, as compared to Pluronic F127 micelles or PF127/Phosphatidyl choline which were 30.52±1.18nm and 154.35±5.5nm in size, respectively. The uptake of PF127/SDS micellar formulation incorporating Rhodamine 123 in MCF7 cancer cells was found to be higher (84.25%) than PF127/PC, PF127 and MTX i.e. 66.26%, 73.59% and 53% respectively. The in vitro MTX release from PF127, PF127/SDS and PF127/PC polymeric micelles formulations was observed to be 69%, 69.5% and 66% at 12 h whereas 80.89%, 77.67% and 78.54% after 24 h, respectively and revealed a sustained release. MTX-loaded PF127/SDS micelles showed high partition coefficient and negative free energy of solubilization compared to PF127 and PF127/PC which signify self-assembly behavior and thermodynamic stability towards higher dissociation.

CONCLUSION

It was finally concluded that MTX-loaded PF127/SDS micelles act as a potential anticancer delivery system in comparison to PF127/PC and PF127 to combat tumor cells by enhancing their cellular uptake targeting with sustained release pattern and reducing the thermodynamic instability. Thus, PF127/SDS micellar formulation can provide a useful alternative dosage form for intravenous administration of MTX.

Photosensitive Supramolecular Micelle-Mediated Cellular Uptake of Anticancer Drugs Enhances the Efficiency of Chemotherapy

The development of stimuli-responsive supramolecular micelles with high drug-loading contents that specifically induce significant levels of apoptosis in cancer cells remains challenging. Herein, we report photosensitive uracil-functionalized supramolecular micelles that spontaneously form via self-assembly in aqueous solution, exhibit sensitive photo-responsive behavior, and effectively encapsulate anticancer drugs at high drug-loading contents. Cellular uptake analysis and double-staining flow cytometric assays confirmed the presence of photo-dimerized uracil groups within the irradiated micelles remarkably enhanced endocytic uptake of the micelles by cancer cells and subsequently led to higher levels of apoptotic cell death, and thus improved the therapeutic effect in vitro. Thus, photo-dimerized uracil-functionalized supramolecular micelles may potentially represent an intelligent nanovehicle to improve the safety, efficacy, and applicability of cancer chemotherapy, and could also enable the development of nucleobase-based supramolecular micelles for multifunctional biomaterials and novel biomedical applications.

Chitosan-based particulate systems for drug and vaccine delivery in the treatment and prevention of neglected tropical diseases

Neglected tropical diseases (NTDs) are a diverse group of infections which are difficult to prevent or control, affecting impoverished communities that are unique to tropical or subtropical regions. In spite of the low number of drugs that are currently used for the treatment of these diseases, progress on new drug discovery and development for NTDs is still very limited. Therefore, strategies on the development of new delivery systems for current drugs have been the main focus of formulators to provide improved efficacy and safety. In recent years, particulate delivery systems at micro- and nanosize, including polymeric micro- and nanoparticles, liposomes, solid lipid nanoparticles, metallic nanoparticles, and nanoemulsions, have been widely investigated in the treatment and control of NTDs. Among these polymers used for the preparation of such systems is chitosan, which is a marine biopolymer obtained from the shells of crustaceans. Chitosan has been investigated as a delivery system due to the versatility of its physicochemical properties as well as bioadhesive and penetration-enhancing properties. Furthermore, chitosan can be also used to improve treatment due to its bioactive properties such as antimicrobial, tissue regeneration, etc. In this review, after giving a brief introduction to neglected diseases and particulate systems developed for the treatment and control of NTDs, the chitosan-based systems will be described in more detail and the recent studies on these systems will be reviewed. Graphical abstract.

Nanotechnology: A Promising Approach for Delivery of Neuroprotective Drugs

Central nervous system (CNS) disorders especially neurodegenerative disorders are the major challenge for public health and demand the great attention of researchers to protect people against them. In past few decades, different treatment strategies have been adopted, but their therapeutic efficacy are not enough and have only shown partial mitigation of symptoms. Blood-brain barrier (BBB) and blood-cerebrospinal fluid barrier (BSCFB) guard the CNS from harmful substances and pose as the major challenges in delivering drugs into CNS for treatment of CNS complications such as Alzheimer’s disease (AD), Parkinson’s disease (PD), Huntington’s disease (HD), stroke, epilepsy, brain tumors, multiple sclerosis (MS), and encephalitis, etc. Nanotechnology has come out as an exciting and promising new platform of treating neurological disorders and has shown great potential to overcome problems related to the conventional treatment approaches. Molecules can be nanoengineered to carry out multiple specific functions such as to cross the BBB, target specific cell or signaling pathway, respond to endogenous stimuli, and act as a vehicle for gene delivery, support nerve regeneration and cell survival. In present review, the role of nanocarrier systems such as liposomes, micelles, solid lipid nanoparticles (SLNPs), dendrimers, and nanoemulsions for delivery of various neurotherapeutic agents has been discussed, besides this, their mechanism of action, and nanoformulation of different neuroprotective agents like curcumin, edaravone, nerve growth factors in CNS disorders like Alzheimer’s, Parkinsonism, epilepsy, stroke, and brain tumors has been reviewed.

Central composite design-based optimization of lopinavir vitamin E-TPGS micelle: In vitro characterization and in vivo pharmacokinetic study

This study was aimed at formulating Lopinavir loaded Vitamin E-TPGS micelles to enhance its oral bioavailability. Lopinavir is an HIV-1 protease inhibitor with low aqueous solubility leading to poor oral bioavailability and thus frequent dosing. Drug loaded micelles were fabricated using thin film hydration technique and optimized by two-factor five-level central composite design. For this purpose independent variables selected were TPGS to drug ratio and rotational speed of rotary evaporator, whereas dependent variables chosen were particle size and % entrapment efficiency. The effect of an independent variable on the dependent variable was studied by generating a quadratic polynomial model. Results of in vitro characterization showed that prepared lopinavir micelles exhibited particle size 91.71 nm, polydispersity index 0.129, zeta potential -24.8 mV, entrapment efficiency 99.36 ± 1.06% and drug loading 20.83 ± 1.23%. Results of DSC and P-XRD evaluation revealed that drugs were successfully encapsulated inside the Vitamin E-TPGS micelles. In vitro release studies displayed enhancement in drug dissolution as a result of its loading into micelles. TEM images showed that micelles were spherical. On oral administration of lopinavir micelles; the relative bioavailability was boosted by 3.17 folds compared to lopinavir suspensions. Thus, we can conclude that TPGS based micelles possess the prodigious potential to overcome the challenges of current HAART therapy.

Fabrication and characterization of hydrocortisone loaded Dextran-Poly Lactic-co-Glycolic acid micelle

A nanomicelle based drug delivery systems is a formulation that can improve the bioavailability and dissolution rate of water-insoluble drugs. In this study, the Dextran-Poly Lactic-co-Glycolic Acid copolymer was synthesized with esterification reaction, confirmed using the fourier-transform infrared spectroscopy and nuclear magnetic resonance. The used method for nanomicelle preparation was nanoprecipitation and the critical micelle concentration value was obtained 10 μg/mL. The particle size of the nanomicelle was less than 100 nm ± 4 nm with narrow size distribution (Polydispersity index = 0.06). Hydrocortisone was loaded to this system. The obtained results for the encapsulation efficiency were 79%, and the drug release was adjusted to a first-order kinetic model with 90% release of drug within the 12 h. The MTT assay showed that even in the high concentration of micelle, the cell viability was remained higher than 90%. Considering the toxicity investigation findings, the Dextran-Poly Lactic-co-Glycolic Acid micellar systems can be suggested as a considerable drug delivery system in hydrocortisone pharmaceutical dosage forms.

The potential of micelleplexes as a therapeutic strategy for osteosarcoma disease

Osteosarcoma (OS) is a rare aggressive bone, presenting low patient survival rate, high metastasis and relapse occurrence, mostly due to multi-drug resistant cells. To surpass that, the use of nanomedicine for the targeted delivery of genetic material, drugs or both have been extensively researched. In this review, we address the current situation of the disorder and some gene therapy options in the nanomedicine field that have been investigated. Among them, polymeric micelles (PM) are an advantageous therapeutic alternative highly explored for OS, as they allow for the targeted transportation of poorly water-soluble drugs to cancer cells. In addition, micelleplexes are PMs with cationic properties with promising features, such as the possibility for a dual therapy, which have made them an attractive research subject. The aim of this review article is to elucidate the application of a micelleplex formulation encapsulating the underexpressed miRNA145 to achieve an active targeting to OS cells and overcome multi-drug resistance, as a new and viable therapeutic strategy.

Alginate-poloxamer beads for clotrimazole delivery: Molecular interactions, mechanical properties, and anticandidal activity

Calcium alginate (CA) beads loaded with clotrimazole (CZ) were modified by adding poloxamer (PLX) in this study. Blends of PLX188 or PLX407 into sodium alginate (SA) dispersions caused a decrease in the SA zeta potential and led to viscosity synergism. SA with carboxyl and hydroxyl groups can interact with the hydroxyl groups of PLX via hydrogen bonding. A stronger interaction of SA with PLX407 was found when compared to the interaction between SA and PLX188. The PLX-CA beads gave a higher CZ entrapment efficiency than the CA beads. The highest PLX content used created an amorphous form of CZ in the beads because of the CZ solubilization by the PLX micelles. The addition of 0.5 or 1% w/v PLX can strengthen the CZ-loaded CA beads. Furthermore, the PLX-CA beads display a lower water uptake than the CA beads. PLX micellization can enhance CZ release and enhance the efficacy of CZ against Candida albicans. This study indicates that the molecular interaction of SA with PLX and the PLX micellization of CZ can improve the characteristics of CZ-loaded CA beads, which offer good potential for use as drug delivery systems or drug reservoirs in tablets for oral candidiasis.