Enzyme Initiated Radical Polymerizations

Chlorophyll derivatives as catalysts and comonomers for atom transfer radical polymerizations

Derivatives of chlorophyll were investigated as both catalysts and comonomers to generate well-defined polymers with narrow dispersities under AGET ATRP conditions.

Miranda B, Lodoso-Torrecilla I, van Nisselroy CAJ, Hoogenberg BJ, Dantuma S, Hollmann F, de Vries JW, Warszawik EM, Fischer R, Commandeur U, van Rijn P. Biocatalytically induced surface modification of the tobacco mosaic virus and the bacteriophage M13

A one-step laccase induced free radical oxidation of the tobacco mosaic virus and bacteriophage M13 led to acrylate-functionalized viruses with customizable properties.

Near-Infrared-Triggered in Situ Gelation System for Repeatedly Enhanced Photothermal Brachytherapy with a Single Dose

Brachytherapy by the placing of therapeutic radioactive materials into or near tumors has been widely used in a clinical setting for cancer treatment. The efficacy of brachytherapy, however, may often be limited by the radiation resistance for tumor cells located in the hypoxic region of a solid tumor as well as the non-optimal distribution of radioactivity inside the tumor. Herein, a hybrid hydrogel system is developed by using ¹³¹I-labeled copper sulfide (CuS/¹³¹I) nanoparticles as the photothermal- and radiotherapeutic agent, poly(ethylene glycol) double acrylates (PEGDA) as the polymeric matrix, and 2,2'-azobis[2-(2-imidazolin-2-yl) propane] dihydrochloride (AIPH) as the thermal initiator to realize light-induced in situ gelation in the tumor for the combined photothermal brachytherapy. After local injection, CuS/¹³¹I nanoparticles under irradiation by the 915 nm near-infrared (NIR) laser would produce heat to mildly raise the tumor temperature and initiate the polymerization of PEGDA by activating the AIPH thermal initiator, effectively fixing CuS/¹³¹I by in situ gelation within the tumor for the long term. By the repeated NIR irradiation of tumors, the tumor hypoxia could be relieved for a much-longer term, resulting in a significant synergistic photothermal brachytherapeutic effect to eliminate tumors. This work presents an efficient type of NIR-responsive nanoparticle-encapsulated hydrogel system, inspiring the design of a form of brachytherapy.

Repurposing Biocatalysts to Control Radical Polymerizations

Reversible-deactivation radical polymerizations (controlled radical polymerizations) have revolutionized and revitalized the field of polymer synthesis. While enzymes and other biologically derived catalysts have long been known to initiate free radical polymerizations, the ability of peroxidases, hemoglobin, laccases, enzyme-mimetics, chlorophylls, heme, red blood cells, bacteria, and other biocatalysts to control or initiate reversible-deactivation radical polymerizations has only been described recently. Here, the scope of biocatalytic atom transfer radical polymerizations (bioATRP), enzyme-initiated reversible addition-fragmentation chain transfer radical polymerizations (bioRAFT), biocatalytic organometallic-mediated radical polymerizations (bioOMRP), and biocatalytic reversible complexation mediated polymerizations (bioRCMP) is critically reviewed, and the potential of these reactions for the environmentally friendly synthesis of precision polymers, for the preparation of functional nanostructures, for the modification of surfaces, and for biosensing is discussed.

Laccase-Catalyzed Heterocoupling of Dihydroquercetin and p-Aminobenzoic Acid: Effect of the Reaction Product on Cultured Cells

Derivatization of the natural flavonoid dihydroquercetin with p-aminobenzoic acid was carried out in an ethyl acetate/citric buffer biphasic system using laccase from the fungus Trametes hirsuta. The main reaction product yield was ~68 mol %. The product was characterized by ¹H NMR, ¹³C NMR, and liquid chromatography-mass spectroscopy, and its structure was elucidated. The reaction product affected viability of cultured human rhabdomyosarcoma cells (RD cell line) in a dose-dependent manner and, therefore, can be of interest to pharmaceutical industry.

Enzymatic Synthesis of Highly Electroactive Oligoanilines from a p-Aminodiphenylamine/Aniline Mixture with Anionic Vesicles as Templates

Oligoanilines with characteristic properties of the electrically conductive emeraldine salt form of polyaniline (PANI-ES) are promising molecules for various applications. A mixture of such oligoanilines can be obtained, for example, enzymatically under mild conditions from the linear aniline dimer p-aminodiphenylamine (PADPA) with hydrogen peroxide (H₂O₂) and low amounts of horseradish peroxidase (HRP) in an aqueous pH = 4.3 suspension of anionic vesicles formed from AOT, the sodium salt of bis(2-ethylhexyl)sulfosuccinate. However, the simultaneous formation of undesired side products containing phenazine-type units or oxygen atoms is unsatisfactory. We have found that this situation can be improved considerably by using a mixture of PADPA and aniline instead of PADPA only but otherwise nearly identical conditions. The PANI-ES-like oligoaniline products that are obtained from the PADPA and aniline mixture were not only found to have much lower contents of phenazine-type units and not contain oxygen atoms but also were shown to be more electroactive in cyclic voltammetry measurements than the PANI-ES-like products obtained from PADPA only. The AOT vesicle suspension remained stable without product precipitation during and after the entire reaction so that it could be analyzed by in situ UV/visible/near-infrared, in situ electron paramagnetic resonance, and in situ Raman spectroscopy measurements. These measurements were complemented with ex situ high-performance liquid chromatography analyses of the deprotonated and reduced products formed from mixtures of PADPA and either fully or partially deuterated aniline. On the basis of the results obtained, a reaction mechanism is proposed for explaining this improved HRP-triggered, vesicle-assisted synthesis of electroactive PANI-ES-like products. The oligomeric products obtained can be further used, without additional special workup, for example, to coat electrodes for their possible application in biosensor devices.

Laccase Activity as an Essential Factor in the Oligomerization of Rutin

The enzyme-mediated polymerization of bioactive phenolic compounds, such as the flavonoid rutin, has gained interest due to the enhanced physico-chemical and biological properties of the products, which increases their potential application as a nutraceutical. In this work, the influence of enzyme activity on rutin oligomerization was evaluated in reactions with low (1000 U/L) and high (10,000 U/L) initial laccase activities. For both reactions, high molecular weight oligomer fractions showed better properties compared to lower weight oligomers. Products of the reaction with low laccase activity exhibited thermal stability and antioxidant potential similar to control reaction, but led to higher inhibitory activity of xanthine oxidase and apparent aqueous solubility. Oligomers obtained in the reaction with high laccase activity showed better apparent aqueous solubility but decreased biological activities and stability. Their low antioxidant activity was correlated with a decreased phenolic content, which could be attributed to the formation of several bonds between rutin molecules.

Biocatalytic Oxidation Reactions: A Chemist's Perspective

Oxidation chemistry using enzymes is approaching maturity and practical applicability in organic synthesis. Oxidoreductases (enzymes catalysing redox reactions) enable chemists to perform highly selective and efficient transformations ranging from simple alcohol oxidations to stereoselective halogenations of non-activated C-H bonds. For many of these reactions, no "classical" chemical counterpart is known. Hence oxidoreductases open up shorter synthesis routes based on a more direct access to the target products. The generally very mild reaction conditions may also reduce the environmental impact of biocatalytic reactions compared to classical counterparts. In this Review, we critically summarise the most important recent developments in the field of biocatalytic oxidation chemistry and identify the most pressing bottlenecks as well as promising solutions.

Copper-Mediated Polymerization without External Deoxygenation or Oxygen Scavengers

As a method for overcoming the challenge of rigorous deoxygenation in copper-mediated controlled radical polymerization processes [e.g., atom-transfer radical polymerization (ATRP)], reported here is a simple Cu0 -RDRP (RDRP=reversible deactivation radical polymerization) system in the absence of external additives (e.g., reducing agents, enzymes etc.). By simply adjusting the headspace of the reaction vessel, a wide range of monomers, namely acrylates, methacrylates, acrylamides, and styrene, can be polymerized in a controlled manner to yield polymers with low dispersities, near-quantitative conversions, and high end-group fidelity. Significantly, this approach is scalable (ca. 125 g), tolerant to elevated temperatures, compatible with both organic and aqueous media, and does not rely on external stimuli which may limit the monomer pool. The robustness and versatility of this methodology is further demonstrated by the applicability to other copper-mediated techniques, including conventional ATRP and light-mediated approaches.

Investigating the Mechanism of Horseradish Peroxidase as a RAFT-Initiase

A detailed mechanistic and kinetic study of enzymatically initiated RAFT polymerization is performed by combining enzymatic assays and polymerization kinetics analysis. Horseradish peroxidase (HRP) initiated RAFT polymerization of dimethylacrylamide (DMAm) was studied. This polymerization was controlled by 2-(propionic acid)ylethyl trithiocarbonate (PAETC) in the presence of H₂O₂ as a substrate and acetylacetone (ACAC) as a mediator. In general, well controlled polymers with narrow molecular weight distributions and good agreement between theoretical and measured molecular weights are consistently obtained by this method. Kinetic and enzymatic assay analyses show that HRP loading accelerates the reaction, with a critical concentration of ACAC needed to effectively generate polymerization initiating radicals. The PAETC RAFT agent is required to control the reaction, although the RAFT agent also has an inhibitory effect on enzymatic performance and polymerization. Interestingly, although H₂O₂ is the substrate for HRP there is an optimal concentration near 1 mM, under the conditions studies, with higher or lower concentrations leading to lower polymerization rates and poorer enzymatic activity. This is explained through a competition between the H₂O₂ acting as a substrate, but also an inhibitor of HRP at high concentrations.

Biofabricating Functional Soft Matter Using Protein Engineering to Enable Enzymatic Assembly

Biology often provides the inspiration for functional soft matter, but biology can do more: it can provide the raw materials and mechanisms for hierarchical assembly. Biology uses polymers to perform various functions, and biologically derived polymers can serve as sustainable, self-assembling, and high-performance materials platforms for life-science applications. Biology employs enzymes for site-specific reactions that are used to both disassemble and assemble biopolymers both to and from component parts. By exploiting protein engineering methodologies, proteins can be modified to make them more susceptible to biology's native enzymatic activities. They can be engineered with fusion tags that provide (short sequences of amino acids at the C- and/or N- termini) that provide the accessible residues for the assembling enzymes to recognize and react with. This "biobased" fabrication not only allows biology's nanoscale components (i.e., proteins) to be engineered, but also provides the means to organize these components into the hierarchical structures that are prevalent in life.

Oxidoreductase-Initiated Radical Polymerizations to Design Hydrogels and Micro/Nanogels: Mechanism, Molding, and Applications

Due to their 3D cross-linked networks and tunable physicochemical properties, polymer hydrogels with different sizes are applied widely in tissue engineering, drug-delivery systems, pollution regulation, ionic conducting electrolytes, agricultural drought-resistance, cosmetics, and the food industry. Novel, environmentally friendly, and efficient oxidoreductase-initiated radical polymerizations to design hydrogels and micro/nanogels have gained increasing attention. Herein, the recent advances on the use of novel enzyme-initiated systems for hydrogel polymerization, including the mechanisms, and molding of polymeric and hybrid-polymeric networks are reviewed. Preliminary progress related to interfacial enzymatic polymerization for the generation of hybrid micro/nanogels is introduced as an emerging initiating approach. In addition, certain biological applications in tissue engineering, bioimaging, and therapy are demonstrated step by step. Finally, some perspectives on the safety profile of enzymatic formed hydrogels, new enzymatic systems, and potential theranostic applications are discussed.

Nanoinitiator for enzymatic anaerobic polymerization and graft enhancement of gelatin-PAAM hydrogel

As an emerging method for mildly molding polymer hydrogel bioscaffolds, the enzymatically polymerized system is mainly based on the screening of various oxidoreductases to produce radicals, but the design of multifunctional nanoinitiators to facilitate hydrogel performance remains challenging. Here, we utilize N-hydroxyimide-modified silica nanoparticles as nanoinitiators to simultaneously trigger glucose oxidase anaerobic polymerization and nanoparticle-grafting enhancement of the gelatin-polyacrylamide (PAAM) hydrogel. The enzyme-nanoinitiator system produced nitrogen radicals, which were further converted into carbon radicals via GOx-catalyzed glucose reduction, as confirmed by electron paramagnetic resonance (EPR) analysis. Our stretchable hydrogel has a 12-fold increased fracture energy relative to traditional hydrogel due to grafting enhancement by the nanoinitiator. The temperature-dependent physical crosslinking of gelatin endowed our hydrogel facile printing ability. Cytotoxicity assay and 3D cell culture demonstrated the low toxicity of our hydrogel. As the first example of the use of nanoinitiators for enzymatic polymerization, this work provides a biocompatible platform to prepare or print hydrogel bioscaffolds with the required mechanical strength.

Horseradish peroxidase-mediated synthesis of an antioxidant gallic acid-g-chitosan derivative and its preservation application in cherry tomatoes

Horseradish peroxidase-mediated grafting of gallic acid to chitosan with good antioxidant capacity for preservation of cherry tomatoes.

Controlling Enzymatic Polymerization from Surfaces with Switchable Bioaffinity

The affinity of surfaces toward proteins is found to be a key parameter to govern the synthesis of polymer brushes by surface-initiated biocatalytic atom transfer radical polymerization (SI-bioATRP). While the "ATRPase" hemoglobin (Hb) stimulates only a relatively slow growth of protein repellent brushes, the synthesis of thermoresponsive grafts can be regulated by switching the polymer's attraction toward proteins across its lower critical solution temperature (LCST). Poly(N-isopropylacrylamide) (PNIPAM) brushes are synthesized in discrete steps of thickness at temperatures above LCST, while the biocatalyst layer is refreshed at T < LCST. Multistep surface-initiated biocatalytic ATRP demonstrates a high degree of control, results in high chain end group fidelity and enables the synthesis of multiblock copolymer brushes under fully aqueous conditions. The activity of Hb can be further modulated by tuning the accessibility of the heme pocket within the protein. Hence, the multistep polymerization is accelerated at acid pH, where the enzyme undergoes a transition from its native to a molten globule conformation. The controlled synthesis of polymer brushes by multistep SI-bioATRP highlights how a biocatalytic synthesis of grafted polymer films can be precisely controlled through the modulation of the polymer's interfacial physicochemical properties, in particular of the affinity of the surface toward proteins. This is not only of importance to gain a predictive understanding of surface-confined enzymatic polymerizations, but also represents a new way to translate bioadhesion into a controlled functionalization of materials.

Oxidation of Pyrrole by Dehaloperoxidase-Hemoglobin: Chemoenzymatic Synthesis of Pyrrolin-2-Ones

The use of oxidoreductases as biocatalysts in the syntheses of functionalized, monomeric pyrroles has been a challenge owing to, among a number of factors, undesired polypyrrole formation. Here, we have investigated the ability of dehaloperoxidase (DHP), the coelomic hemoglobin from the terebellid polychaete Amphitrite ornata, to catalyze the H2O2-dependent oxidation of pyrroles as a new class of substrate for this enzyme. Substrate oxidation was observed for all compounds employed (pyrrole, N-methylpyrrole, 2-methylpyrrole, 3-methylpyrrole and 2,5-dimethylpyrrole) under both aerobic and anaerobic conditions. Using pyrrole as a representative substrate, only a single oxidation product, 4-pyrrolin-2-one, was observed, and notably without formation of polypyrrole. Reactivity could be initiated from all three biologically relevant oxidation states for this catalytic globin: ferric, ferrous and oxyferrous. Isotope labeling studies determined that the O-atom incorporated into the 4-pyrrolin-2-one product was derived exclusively from H2O2, indicative of a peroxygenase mechanism. Consistent with this observation, single- and double-mixing stopped-flow UV-visible spectroscopic studies supported Compound I, but not Compounds ES or II, as the catalytically-relevant ferryl intermediate involved in pyrrole oxidation. Electrophilic addition of the ferryl oxygen to pyrrole is proposed as the mechanism of O-atom transfer. The results demonstrate the breadth of chemical reactivity afforded by dehaloperoxidase, and provide further evidence for establishing DHP as a multifunctional globin with practical applications as a biocatalyst.

Oxygen-tuned nanozyme polymerization for the preparation of hydrogels with printable and antibacterial properties

Nanozymes merge nanotechnology with biology and provide a lower cost and higher stability options, compared to that of natural enzymes. However, nanozyme catalyzed polymerization under physiological conditions is still a big challenge due to heavy oxygen inhibition. In this study, the simple glucose oxidase system can effectively adjust oxygen concentration and generate hydrogen peroxide, which assists in the realization of nanozyme-catalyzed polymerization. The nanozyme based hydrogel is printable due to its mild preparation with gradually increased viscosity. The antibacterial performance is ascribed to the in situ generated hydroxyl radical via the reaction of the bound nanozyme and glucose.

Laccase catalyzed grafting of –N–OH type mediators to lignin via radical–radical coupling

Lignin can be functionalized with –N–OH type mediators via laccase catalysis. Three radical coupling mechanisms are suggested for this enzymatic “hetero-functionalization” which may be a new route for biomass lignin upgrading.

Comprehensive investigation of the enzymatic oligomerization of esculin by laccase in ethanol : water mixtures

The oligomerization of esculin by laccase in aqueous medium resulted in a precipitate fraction with excellent antioxidant properties.

Enzymatic oligomerization and polymerization of arylamines: state of the art and perspectives

The literature concerning the oxidative oligomerization and polymerization of various arylamines, e.g., aniline, substituted anilines, aminonaphthalene and its derivatives, catalyzed by oxidoreductases, such as laccases and peroxidases, in aqueous, organic, and mixed aqueous organic monophasic or biphasic media, is reviewed. An overview of template-free as well as template-assisted enzymatic syntheses of oligomers and polymers of arylamines is given. Special attention is paid to mechanistic aspects of these biocatalytic processes. Because of the nontoxicity of oxidoreductases and their high catalytic efficiency, as well as high selectivity of enzymatic oligomerizations/polymerizations under mild conditions-using mainly water as a solvent and often resulting in minimal byproduct formation-enzymatic oligomerizations and polymerizations of arylamines are environmentally friendly and significantly contribute to a "green" chemistry of conducting and redox-active oligomers and polymers. Current and potential future applications of enzymatic polymerization processes and enzymatically synthesized oligo/polyarylamines are discussed.

Diffusive Motion of Linear Microgel Assemblies in Solution

Due to the ability of microgels to rapidly contract and expand in response to external stimuli, assemblies of interconnected microgels are promising for actuation applications, e.g., as contracting fibers for artificial muscles. Among the properties determining the suitability of microgel assemblies for actuation are mechanical parameters such as bending stiffness and mobility. Here, we study the properties of linear, one-dimensional chains of poly(N-vinylcaprolactam) microgels dispersed in water. They were fabricated by utilizing wrinkled surfaces as templates and UV-cross-linking the microgels. We image the shapes of the chains on surfaces and in solution using atomic force microscopy (AFM) and fluorescence microscopy, respectively. In solution, the chains are observed to execute translational and rotational diffusive motions. Evaluation of the motions yields translational and rotational diffusion coefficients and, from the translational diffusion coefficient, the chain mobility. The microgel chains show no perceptible bending, which yields a lower limit on their bending stiffness.

Laccase-mediated formation of mesoporous silica nanoparticle based redox stimuli-responsive hybrid nanogels as a multifunctional nanotheranostic agent

In this work, we designed a new hybrid nanogel with redox responsive polymer gel shells and mesoporous silica nanoparticles (MSNs) cores via laccase-mediated radical polymerization. The successful coating of the responsive gel shells on the MSNs was confirmed by the morphology and increased diameters of the particles as determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS). As observed by scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDS), the presence of the element S around the MSNs further confirmed the formation of the gel shell. When loaded with doxorubicin (DOX), these hybrid nanogels had a significantly higher cumulative DOX release in a reductive environment than that found under physiological conditions. The MSNs with mesoporous channels were loaded with perfluorohexane (PFH) for ultrasound imaging, which was enhanced by the presence of the elastic gel shells.

A comparative study of enzyme initiators for crosslinking phenol-functionalized hydrogels for cell encapsulation

BACKGROUND

Dityrosine crosslinking in proteins is a bioinspired method of forming hydrogels. This study compares oxidative enzyme initiators for their relative crosslinking efficiency and cytocompatibility using the same phenol group and the same material platform. Four common enzyme and enzyme-like oxidative initiators were probed for resulting material properties and cell viability post-encapsulation.

RESULTS

All four initiators can be used to form phenol-crosslinked hydrogels, however gelation rates are dependent on enzyme type, concentration, and the oxidant. Horseradish peroxidase (HRP) or hematin with hydrogen peroxide led to a more rapid poly (vinyl alcohol)-tyramine (PVA-Tyr) polymerization (10-60 min) because a high oxidant concentration was dissolved within the macromer solution at the onset of crosslinking, whereas laccase and tyrosinase require oxygen diffusion to crosslink phenol residues and therefore took longer to gel (2.5+ hours). The use of hydrogen peroxide as an oxidant reduced cell viability immediately post-encapsulation. Laccase- and tyrosinase-mediated encapsulation of cells resulted in higher cell viability immediately post-encapsulation and significantly higher cell proliferation after one week of culture.

CONCLUSIONS

Overall this study demonstrates that HRP/H2O2, hematin/H2O2, laccase, and tyrosinase can create injectable, in situ phenol-crosslinked hydrogels, however oxidant type and concentration are critical parameters to assess when phenol crosslinking hydrogels for cell-based applications.

Structural characterization of allomelanin from black oat

The brown to black coloration found in plants is due to the melanins, which have been relatively poorly investigated among the plant pigments. The aim of this work was to study the dark pigment extracted from the black oat hull with respect to composition and structure. Ultraviolet-visible (UV-Vis) spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) and Fourier transform infrared (FT-IR) spectroscopy were applied for the characterization of the pigment. UV-Vis spectroscopy revealed that the extracted material displays a broadband, structureless absorption profile a common feature of melanins. MALDI-TOF MS measurements demonstrated that oat melanin is a homopolymer built up from p-coumaric acid and consists mainly of low molecular weight (527-1499 Da) oligomers of 3-9 monomer units. The tetramer oligomer proved to be dominant. The results of the FT-IR analysis indicated that oat melanin is a fully conjugated aromatic system containing tetrasubstituted aromatic rings linked by CC coupling. The in vitro preparation of melanin from p-coumaric acid by horseradish peroxidase was performed for comparison. The resulting polymer consisted of oligomers of 4-9 monomer units similarly to those in oat melanin. However, the building blocks proved to be connected to each other via COC linkages in contrast with the CC linkages in oat melanin.

Surface Immobilization of pH-Responsive Polymer Brushes on Mesoporous Silica Nanoparticles by Enzyme Mimetic Catalytic ATRP for Controlled Cargo Release

Peroxidase mimetic catalytic atom transfer radical polymerization (ATRP) was first used to install tertiary amine-functionalized polymer brushes on the surface of mesoporous silica nanoparticles (MSNs) in a facile and highly efficient manner. Poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) brushes-grafted MSNs were fabricated by biocompatible deuterohemin-β-Ala-His-Thr-Val-Glu-Lys (DhHP-6)-catalyzed surface-initiated ATRP (SI-ATRP). The resulting organic⁻inorganic hybrid nanocarriers were fully characterized by Fourier transform-infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (XRD), SEM, TEM, Elemental analysis, Zeta-potential, and N₂ adsorption⁻desorption isotherms, which demonstrated the successful coating of pH-responsive polymers on the MSN surface. Rhodamine 6G (Rh6G) dyes were further loaded within the mesopores of this nanocarrier, and the release of Rh6G out of MSNs in a controlled fashion was achieved upon lowing the solution pH. The electrostatic repulsion of positively-charged tertiary ammonium of PDMAEMAs in acidic environments induced the stretching out of polymer brushes on MSN surfaces, thus opening the gates to allow cargo diffusion out of the mesopores of MSNs.

Oligoesculin fraction induces anti-tumor effects and promotes immune responses on B16-F10 mice melanoma

Laccase was used to enzymatically polymerize esculin. Oligoesculin fraction was obtained after ultrafiltration through a 5-kDa membrane. Several studies have been carried out to prove the effectiveness of natural substances such as immunomodulators to promote the anti-cancer activity in situ. The purpose of our report was to explore whether the anti-tumor potential of the oligoesculin fraction in vitro and in vivo is linked to its immunological mechanisms in melanoma-bearing mice. We revealed that oligoesculin fraction reduced B16-F10 proliferation and migration in vitro in a dose-related manner. Moreover, melanin synthesis and tyrosinase activity were inhibited in these melanoma cells in a concentration-dependent way. The anti-tumor potential of oligoesculin fraction was also assessed in vivo. Our results showed that intraperitoneal administration of oligoesculin fraction, at 50 mg/kg body weight (b.w.) for 21 days, reduced tumor size and weight with percentages of inhibition of 94 and 87 %, respectively. Oligoesculin fraction was effective in promoting lysosomal activity and nitric oxide (NO) production by peritoneal macrophages in tumor-implanted mice. In addition, the activities of natural killer (NK), cytotoxic T lymphocytes, and macrophages were significantly enhanced by oligoesculin fraction. These findings suggested that this polymer with its anti-tumor and immunomodulatory properties could be used for the treatment of melanoma.

Co-immobilization of laccase and mediator through a self-initiated one-pot process for enhanced conversion of malachite green

Laccase is a green biocatalyst. It works with molecular oxygen and produces water as the only by-product. However, its practical application is far less than satisfactory due to the low stability/poor reusability of free laccase and the potential secondary pollution caused by dissolved mediators. To address those bottlenecks in laccase-based catalysis, a novel biocatalyst (Immo-LMS) was fabricated by simultaneously immobilizing both laccase and a mediator (acetylacetone, abbreviated as AA) into a hydrogel through the laccase-AA initiated polymerization. This self-initiated immobilization process avoided the forced conformational change of laccase in the passive embedding to pre-existing carriers. Resulting from the effective cooperation of laccase and AA, the Immo-LMS had the highest substrate conversion quantity to malachite green, followed by the sole immobilized laccase and the immobilized laccase with an external mediator. Besides the improved activity, the Immo-LMS showed enhanced stability. The good performance of the Immo-LMS suggests that the co-immobilization of laccase and mediator through the self-initiated one-pot process was a promising strategy for the immobilization of laccase, which is expected to be helpful to cut down the running cost as well as the potential toxicity that come from mediators in the practical application of laccase.

Enzymes as Green Catalysts for Precision Macromolecular Synthesis

The present article comprehensively reviews the macromolecular synthesis using enzymes as catalysts. Among the six main classes of enzymes, the three classes, oxidoreductases, transferases, and hydrolases, have been employed as catalysts for the in vitro macromolecular synthesis and modification reactions. Appropriate design of reaction including monomer and enzyme catalyst produces macromolecules with precisely controlled structure, similarly as in vivo enzymatic reactions. The reaction controls the product structure with respect to substrate selectivity, chemo-selectivity, regio-selectivity, stereoselectivity, and choro-selectivity. Oxidoreductases catalyze various oxidation polymerizations of aromatic compounds as well as vinyl polymerizations. Transferases are effective catalysts for producing polysaccharide having a variety of structure and polyesters. Hydrolases catalyzing the bond-cleaving of macromolecules in vivo, catalyze the reverse reaction for bond forming in vitro to give various polysaccharides and functionalized polyesters. The enzymatic polymerizations allowed the first in vitro synthesis of natural polysaccharides having complicated structures like cellulose, amylose, xylan, chitin, hyaluronan, and chondroitin. These polymerizations are "green" with several respects; nontoxicity of enzyme, high catalyst efficiency, selective reactions under mild conditions using green solvents and renewable starting materials, and producing minimal byproducts. Thus, the enzymatic polymerization is desirable for the environment and contributes to "green polymer chemistry" for maintaining sustainable society.