Chemistry of Soft Porous Crystals: Structural Dynamics and Gas Adsorption Properties

Chiral Lanthanum Metal-Organic Framework with Gated CO2 Sorption and Concerted Framework Flexibility

A metal–organic framework (MOF) CTH-17 based on lanthanum(III) and the conformationally chiral linker 1,2,3,4,5,6-hexakis(4-carboxyphenyl)benzene, cpb^6–: [La₂(cpb)]·1.5dmf was prepared by the solvothermal method in dimethylformamide (dmf) and characterized by variable-temperature X-ray powder diffraction (VTPXRD), variable-temperature X-ray single-crystal diffraction (SCXRD), and thermogravimetric analysis (TGA). CTH-17 is a rod-MOF with new topology och. It has high-temperature stability with Sohncke space groups P6₁22/P6₅22 at 90 K and P622 at 300 and 500 K, all phases characterized with SCXRD and at 293 K also with three-dimensional (3D) electron diffraction. VTPXRD indicates a third phase appearing after 620 K and stable up to 770 K. Gas sorption isotherms with N₂ indicate a modest surface area of 231 m² g^–1 for CTH-17, roughly in agreement with the crystal structure. Carbon dioxide sorption reveals a gate-opening effect of CTH-17 where the structure opens up when the loading of CO₂ reaches approximately ∼0.45 mmol g^–1 or 1 molecule per unit cell. Based on the SCXRD data, this is interpreted as flexibility based on the concerted movements of the propeller-like hexatopic cpb linkers, the movement intramolecularly transmitted by the π–π stacking of the cpb linkers and helped by the fluidity of the LaO₆ coordination sphere. This was corroborated by density functional theory (DFT) calculations yielding the chiral phase (P622) as the energy minimum and a completely racemic phase (P6/mmm), with symmetric cpb linkers representing a saddle point in a racemization process.

Isotope-selective pore opening in a flexible metal-organic framework

Flexible metal-organic frameworks that show reversible guest-induced phase transitions between closed and open pore phases have enormous potential for highly selective, energy-efficient gas separations. Here, we present the gate-opening process of DUT-8(Ni) that selectively responds to D₂, whereas no response is observed for H₂ and HD. In situ neutron diffraction directly reveals this pressure-dependent phase transition. Low-temperature thermal desorption spectroscopy measurements indicate an outstanding D₂-over-H₂ selectivity of 11.6 at 23.3 K, with high D₂ uptake. First-principles calculations coupled with statistical thermodynamics predict the isotope-selective gate opening, rationalized by pronounced nuclear quantum effects. Simulations suggest DUT-8(Ni) to remain closed in the presence of HT, while it also opens for DT and T₂, demonstrating gate opening as a highly effective approach for isotopolog separation.

Cooperative light-induced breathing of soft porous crystals via azobenzene buckling

Although light is a prominent stimulus for smart materials, the application of photoswitches as light-responsive triggers for phase transitions of porous materials remains poorly explored. Here we incorporate an azobenzene photoswitch in the backbone of a metal-organic framework producing light-induced structural contraction of the porous network in parallel to gas adsorption. Light-stimulation enables non-invasive spatiotemporal control over the mechanical properties of the framework, which ultimately leads to pore contraction and subsequent guest release via negative gas adsorption. The complex mechanism of light-gated breathing is established by a series of in situ diffraction and spectroscopic experiments, supported by quantum mechanical and molecular dynamic simulations. Unexpectedly, this study identifies a novel light-induced deformation mechanism of constrained azobenzene photoswitches relevant to the future design of light-responsive materials.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Light-Driven Molecular Motors Embedded in Covalent Organic Frameworks

The incorporation of molecular machines into the backbone of porous framework structures will facilitate nano actuation, enhanced molecular transport, and other out-of-equilibrium host-guest phenomena in well-defined 3D solid materials. In...

Triplet Dynamic Nuclear Polarization of Guest Molecules through Induced Fit in a Flexible Metal-Organic Framework

Dynamic nuclear polarization utilizing photoexcited triplet electrons (triplet-DNP) has great potential for room-temperature hyperpolarization of nuclear spins. However, the polarization transfer to molecules of interest remains a challenge due to the fast spin relaxation and weak interaction with target molecules at room temperature in conventional host materials. Here, we demonstrate the first example of DNP of guest molecules in a porous material at around room temperature by utilizing the induced-fit-type structural transformation of a crystalline yet flexible metal-organic framework (MOF). In contrast to the usual hosts, 1 H spin-lattice relaxation time becomes longer by accommodating a pharmaceutical model target 5-fluorouracil as the flexible MOF changes its structure upon guest accommodation to maximize the host-guest interactions. Combined with triplet-DNP and cross-polarization (CP), this system realizes an enhanced 19 F-NMR signal of guest target molecules.

Reversible Photochromic Coordination Polymer by Phototriggered Subtle Molecular Conformation Variations

Photochromic materials are constructed with molecules accompanied by structural change after triggering by light, which are of great importance and necessity for various applications. However, because of space-confinement effects, molecule stacking of these photoresponsive chromophores within coordination polymers (CPs) always results in an efficiency decrement and a response delay, and this phenomenon will lead to a poor photochromic property. Herein, a CP (named CIT-E) with a 3-fold-interpenetrating network structure, which was prepared with (Z)-1,2-diphenyl-1,2-bis[4-(pyridin-3-ylmethoxy)phenyl]ethene (1Z) and a CuI cluster, showed fast reversible photochromic behavior. Under UV-light illumination, the color of CIT-Z changed from pale yellow to reddish brown. With the illumination of green light, the polymer could return to its initial color within 10 s. To reveal the mechanism of reversible photochromic behavior of CIT-Z, single-crystal structures of each color state were fully studied, and other scientific study methods were also used, such as time-dependent density functional theory calculation and control experiments. It was found that, with light illumination, this behavior of CIT-Z was the result of a ligand-to-metal charge-transfer process, and this process was triggered by subtle molecular conformation variation of tetraphenylethylene. It should be noted that CIT-Z has high thermal and chemical stability, which are excellent advantages as smart photoresponsive materials. As a proof of concept, a uniform thin film with such a fascinating photochromic property allows applications in invisible anticounterfeiting and dynamic optical data storage. Overall, the present study opens up a new avenue toward reversible photochromic materials.

The role of thermodynamically stable configuration in enhancing crystallographic diffraction quality of flexible MOFs

Single-crystal X-ray diffraction (SCXRD) is a widely used method for structural characterization. Generally, low temperature is of great significance for improving the crystallographic diffraction quality. Herein we observe that this practice is not always effective for flexible metal-organic frameworks (f-MOFs). An abnormal crystallography, that is, more diffraction spots at a high angle and better resolution of diffraction data as the temperature increases in the f-MOF (1-g), is observed. XRD results reveal that 1-g has a reversible anisotropic thermal expansion behavior with a record-high c-axial positive expansion coefficient of 1,401.8 × 10-6 K-1. Calculation results indicate that the framework of 1-g has a more stable thermodynamic configuration as the temperature increases. Such configuration has lower-frequency vibration and may play a key role in promoting higher Bragg diffraction quality at room temperature. This work is of great significance for how to obtain high-quality SCXRD diffraction data.

Pillararene-based molecular-scale porous materials

This review discusses the design and syntheses of molecular-scale pillar[n]arene-based porous materials with promising applications and summarises the development of using pillar[n]arenes as the building blocks of porous materials. From the perspective of "role of participation" in the syntheses of molecular-scale pillar[n]arene-based porous materials, the content can be divided into pillar[n]arenes serving as supramolecular nanovalves on surfaces and as ligands for metal-organic frameworks and covalent organic polymers. By integrating pillararenes, which possess rigid pillar-like structures, electron-rich cavities and desirable host-guest properties, with porous polymers of large surface areas and abundant active sites, applications of the resulting materials in drug release platforms, molecular recognition, sensing, detection, gas adsorption, removal of water pollution, organic photovoltaic materials and heterogeneous catalysis can be realised simultaneously and efficiently. Finally, in the conclusions and perspectives part, we put forward the challenges and viewpoints of the current research on pillar[n]arene-based porous materials. We hope this article can provide a timely and valuable reference for researchers interested in synthetic macrocycles and porous materials.

Structural resolution and mechanistic insight into hydrogen adsorption in flexible ZIF-7

Flexible metal-organic frameworks offer a route towards high useable hydrogen storage capacities with minimal swings in pressure and temperature via step-shaped adsorption and desorption profiles. Yet, the understanding of hydrogen-induced flexibility in candidate storage materials remains incomplete. Here, we investigate the hydrogen storage properties of a quintessential flexible metal-organic framework, ZIF-7. We use high-pressure isothermal hydrogen adsorption measurements to identify the pressure-temperature conditions of the hydrogen-induced structural transition in ZIF-7. The material displays narrow hysteresis and has a shallow adsorption slope between 100 K and 125 K. To gain mechanistic insight into the cause of the phase transition correlating with stepped adsorption and desorption, we conduct powder neutron diffraction measurements of the D2 gas-dosed structures at conditions across the phase change. Rietveld refinements of the powder neutron diffraction patterns yield the structures of activated ZIF-7 and of the gas-dosed material in the dense and open phases. The structure of the activated phase of ZIF-7 is corroborated by the structure of the activated phase of the Cd congener, CdIF-13, which we report here for the first time based on single crystal X-ray diffraction measurements. Subsequent Rietveld refinements of the powder patterns for the gas-dosed structure reveal that the primary D2 adsorption sites in the dense phase form D2-arene interactions between adjacent ligands in a sandwich-like adsorption motif. These sites are prevalent in both the dense and the open structure for ZIF-7, and we hypothesize that they play an important role in templating the structure of the open phase. We discuss the implications of our findings for future approaches to rationally tune step-shaped adsorption in ZIF-7, its congeners, and flexible porous adsorbents in general. Lastly, important to the application of flexible frameworks, we show that pelletization of ZIF-7 produces minimal variation in performance.

MOFs in the time domain

Many of the proposed applications of metal-organic framework (MOF) materials may fail to materialize if the community does not fully address the difficult fundamental work needed to map out the 'time gap' in the literature - that is, the lack of investigation into the time-dependent behaviours of MOFs as opposed to equilibrium or steady-state properties. Although there are a range of excellent investigations into MOF dynamics and time-dependent phenomena, these works represent only a tiny fraction of the vast number of MOF studies. This Review provides an overview of current research into the temporal evolution of MOF structures and properties by analysing the time-resolved experimental techniques that can be used to monitor such behaviours. We focus on innovative techniques, while also discussing older methods often used in other chemical systems. Four areas are examined: MOF formation, guest motion, electron motion and framework motion. In each area, we highlight the disparity between the relatively small amount of (published) research on key time-dependent phenomena and the enormous scope for acquiring the wider and deeper understanding that is essential for the future of the field.

Experimental and Computational Approaches for the Structural Study of Novel Ca-Rich Zeolites from Incense Stick Ash and Their Application for Wastewater Treatment

At present, chemical Si/Al sources are mainly used as precursor materials for the manufacturing of zeolites. Such precursor materials are quite expensive for commercial synthesis. Here, we have reported the synthesis of Ca-based zeolite from incense stick ash waste by the alkali-treatment method for the first time. Incense stick ash (ISA) was used as a precursor material for the synthesis of low Si zeolites by the alkali-treatment method. The as-synthesized zeolites were characterized by various instruments like particle size analyzer (PSA), Fourier transform infrared (FTIR), X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), electron diffraction spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray fluorescence (XRF). FTIR and XRD helped in the identification of the microstructure and crystalline nature of the zeolites and also confirmed the synthesis of Ca-based zeolite with two thetas at 25.7°. The microscopic analysis by FESEM and TEM exhibited that the size of synthesized Ca-rich zeolites varies from 200 to 700 nm and they are aggregated and cuboidal in shape. Additionally, structural, electronic, and density of states’ characteristics of gismondine (Ca2Al4Si4O16·9H2O) structures were evaluated by computational simulations (first principle, density functional theorem). The structural optimization of structures was carried out in the first stage under the lowest condition of total energy and forces acting on atoms for the lattice constant, as well as the available experimental and theoretical findings. The present research approach predicted the transformation of ISA waste into a value-added mineral, i.e., zeolite, which was further used for the removal of both heavy metals and alkali metals from fly ash-based wastewater using inductively coupled plasma-optical emission spectroscopy (ICP-OES).

Three-in-One C2 H2 -Selectivity-Guided Adsorptive Separation across an Isoreticular Family of Cationic Square-Lattice MOFs

Energy-efficient selective physisorption driven C₂ H₂ separation from industrial C2-C1 impurities such as C₂ H₄ , CO₂ and CH₄ is of great importance in the purification of downstream commodity chemicals. We address this challenge employing a series of isoreticular cationic metal-organic frameworks, namely iMOF-nC (n=5, 6, 7). All three square lattice topology MOFs registered higher C₂ H₂ uptakes versus the competing C2-C1 gases (C₂ H₄ , CO₂ and CH₄ ). Dynamic column breakthrough experiments on the best-performing iMOF-6C revealed the first three-in-one C₂ H₂ adsorption selectivity guided separation of C₂ H₂ from 1:1 C₂ H₂ /CO₂ , C₂ H₂ /C₂ H₄ and C₂ H₂ /CH₄ mixtures. Density functional theory calculations critically examined the C₂ H₂ selective interactions in iMOF-6C. Thanks to the abundance of square lattice topology MOFs, this study introduces a crystal engineering blueprint for designing C₂ H₂ -selective layered metal-organic physisorbents, previously unreported in cationic frameworks.

H2O and H2S adsorption by assistance of a heterogeneous carbon-boron-nitrogen nanocage: Computational study

A model of heterogeneous carbon-boron-nitrogen (C-B-N) nanocage was investigated in this work for adsorbing H2O and H2S substances. To achieve this goal, quantum chemical calculations were performed to obtain optimized configurations of substances towards the surface of nanocage. The calculations yielded three possible configurations for relaxing each of substances towards the surface. Formation of acid-base interactions between vacant orbitals of boron atom and full orbitals of each of oxygen and sulfur atoms yielded the strongest complexes of substance-nanocage in comparison with orientation of substances through their hydrogen atoms towards the surface of nanocage. As a consequence, formations of interacting H2O@C-B-N and H2S@C-B-N complexes were achievable, in which mechanism of action showed different strengths for the obtained complexes. Variations of molecular orbital features and corresponding energy gap and Fermi energy for the models before/after adsorption could help for detection of adsorbed substance through a sensor function. And finally, such C-B-N nanocage showed benefit of providing activated surface for efficient adsorption of each of H2O and H2S substance with possibility of differential adsorption regarding the strength of complex formations.

Post-synthetically modified metal-organic frameworks for sensing and capture of water pollutants

Thanks to a bottom-up design of metals and organic ligands, the library of metal-organic frameworks (MOFs) has seen a conspicuous growth. Post-synthetically modified MOFs comprise a relatively smaller subset of this library. Whereas the approach of post-synthetic modification was seminally introduced for MOFs in the early 1990s, the earliest examples of post-synthetically modified MOFs are only congruous with adsorption and catalysis. The utility of PSM-derived MOFs for the sensing and capture of water contaminants is relatively niche. Arguably though, an increasing number of post-synthetically modified MOFs are finding relevance in the context of water pollutant remediation. In this article, we review the recent advances in this area and propose a structure-function relationship-guided blueprint for the future outlook.

Use of 3D domain swapping in constructing supramolecular metalloproteins

Supramolecules, which are formed by assembling multiple molecules by noncovalent intermolecular interactions instead of covalent bonds, often show additional properties that cannot be exhibited by a single molecule. Supramolecules have evolved into molecular machines in the field of chemistry, and various supramolecular proteins are responsible for life activities in the field of biology. The design and creation of supramolecular proteins will lead to development of new enzymes, functional biomaterials, drug delivery systems, etc.; thus, the number of studies on the regulation of supramolecular proteins is increasing year by year. Several methods, including disulfide bond, metal coordination, and surface-surface interaction, have been utilized to construct supramolecular proteins. In nature, proteins have been shown to form oligomers by 3D domain swapping (3D-DS), a phenomenon in which a structural region is exchanged between molecules of the same protein. We have been studying the mechanism of 3D-DS and utilizing 3D-DS to construct supramolecular metalloproteins. Cytochrome c forms cyclic oligomers and polymers by 3D-DS, whereas other metalloproteins, such as various c-type cytochromes and azurin form small oligomers and myoglobin forms a compact dimer. We have also utilized 3D-DS to construct heterodimers with different active sites, a protein nanocage encapsulating a Zn-SO₄ cluster in the internal cavity, and a tetrahedron with a designed building block protein. Protein oligomer formation was controlled for the 3D-DS dimer of a dimer-monomer transition protein. This article reviews our research on supramolecular metalloproteins.

Xylene Recognition in Flexible Porous Coordination Polymer by Guest-Dependent Structural Transition

Xylene isomers are crucial chemical intermediates in great demand worldwide; the almost identical physicochemical properties render their current separation approach energy consuming. In this study, we utilized the soft porous coordination polymer (PCP)'s isomer-specific structural transformation, realizing o-xylene (oX) recognition/separation from the binary and ternary isomer mixtures. This PCP has a flexible structure that contains flexible aromatic pendant groups, which both work as recognition sites and induce structural flexibility of the global framework. The PCP exhibits guest-triggered "breathing"-type structural changes, which are accompanied by the rearrangement of the intraframework π-π interaction. By rebuilding π-π stacking with isomer species, the PCP discriminated oX from the other isomers by its specific guest-loading configuration and separated oX from the isomer mixture via selective adsorption. The xylene-selective property of the PCP is dependent on the solvent; in diluted hexane solution, the PCP favors p-xylene (pX) uptake. The separation results combined with crystallographic analyses revealed the effect of the isomer selectivity of the PCP on xylene isomer separation via structural transition and demonstrated its potential as a versatile selective adsorptive medium for challenging separations.

Highly Selective Adsorption of Carbon Dioxide over Acetylene in an Ultramicroporous Metal-Organic Framework

Separating carbon dioxide from fuel gases like hydrocarbons by physical adsorbents is industrially important and more energy-efficient than traditional liquid extraction or cryogenic distillation methods. It is very important while very challenging to develop CO₂ -selective adsorbents, considering CO₂ is less polarizable than light hydrocarbon molecules, particularly those simultaneously with almost identical molecular dimensions and physical properties, such as acetylene. Herein, an ultramicroporous metal-organic framework constructed from copper(II) and 5-fluoropyrimidin-2-olate, termed Cu-F-pymo, is carefully studied under different activations for inverse separation of CO₂ from C₂ H₂ . The partially desolvated Cu-F-pymo can exclusively capture CO₂ over C₂ H₂ with very high selectivity exceeding 10⁵ under ambient conditions, the highest ever reported. Sorption experiments and modeling studies reveal that such molecular sieving effect is attributed to the suppression of C₂ H₂ adsorption from the blockage of the preferential sites for C₂ H₂ by residual water molecules. The inverse separation is further confirmed by column breakthrough studies given that highly pure acetylene (>99.9%) can be directly harvested from the gas mixture. Cu-F-pymo also shows remarkable stability under harsh conditions.

Layer or Tube? Uncovering Key Factors Determining the Rolling-up of Layered Coordination Polymers

Nanotubular materials have garnered considerable attention since the discovery of carbon nanotubes. Although the layer-to-tube rolling up mechanism has been well recognized in explaining the formation of many inorganic nanotubes, it has not been generally applied to coordination polymers (CPs). To uncover the key factors that determine the rolling-up of layered CPs, we have chosen the Co/R-, S-Xpemp [Xpemp = (4-X-1-phenylethylamino)methylphosphonic acid, X = H, F, Cl, Br] systems and study how the weak interactions influence the formation of layered or tubular structures. Four pairs of homochiral isostructural compounds R-, S-Co(Xpemp)(H₂O)₂ [X = H (1H), F (2F), Cl (3Cl), Br (4Br)] were obtained with tubular structures. The inclusion of 3,3'-azobipyridine (ABP) guest molecules led to compounds R-, S-[Co(Xpemp)(H₂O)₂]₄·ABP·H₂O with layered structures when X was Cl (5Cl) and Br (6Br), but tubular compounds 1H and 2F when X was H and F. Layered structures were also obtained for racemic compounds meso-Co(Xpemp)(H₂O)₂ [X = F (7F), Cl (8Cl), Br (9Br)] using racemic XpempH₂ as the reaction precursor, but not when X = H. A detailed study on R-6Br revealed that layer-to-tube transformation occurred upon removal of ABP under hydrothermal conditions, forming R-4Br with a tubular structure. Similar layer-to-tube conversion did not occur in organic solvents. The results demonstrate that weak interlayer interactions are a prerequisite but not sufficient for the rolling-up of the layers. In the present cases, water also provides a driving force in the layer-to-tube transformation. The experimental results were rationalized by theoretical calculations.

Artificial Metal-Peptide Assemblies: Bioinspired Assembly of Peptides and Metals through Space and across Length Scales

The exploration of chiral crystalline porous materials, such as metal-organic complexes (MOCs) or metal-organic frameworks (MOFs), has been one of the most exciting recent developments in materials science owing to their widespread applications in enantiospecific processes. However, achieving specific tight-affinity binding and remarkable enantioselectivity toward important biomolecules is still challenging. Perhaps most critically, the lack of adaptability, compatibility, and processability in these materials severely impedes practical applications in chemical engineering and biological technology. In this Perspective, artificial metal-peptide assemblies (MPAs), which are achieved by the assembly of peptides and metals with nanometer-sized cavities or pores, is a new development that could address the current bottlenecks of chiral porous materials. Bioinspired assembly of pore-forming MPAs is not foreign to biological systems and has granted scientists an unprecedented level of control over the chiral recognition sites, conformational flexibility, cavity sizes, and hydrophilic segments through ultrafine-tuning of peptide-derived linkers. We will specifically discuss exemplary MPAs including structurally well-defined metal-peptide complexes and highly crystalline metal-peptide frameworks. With insights from these structures, the peptide assembly and folding by the closer cooperation of metal coordination and noncovalent interactions can create adaptable protein-like nanocavities undergoing a myriad of conformational variations that is reminiscent of enzymatic pockets. We also consider challenges to advancing the field, where the deployment of side-chain groups and manipulation of amino acid sequences are more likely to access the programmable, genetically encodable peptide-mediated porous materials, thus contributing to the enhanced enantioselective recognition as well as enabling key biochemical processes in next-generation versatile biomimetic materials.

Spiers Memorial Lecture: Coordination networks that switch between nonporous and porous structures: an emerging class of soft porous crystals

Coordination networks (CNs) are a class of (usually) crystalline solids typically comprised of metal ions or cluster nodes linked into 2 or 3 dimensions by organic and/or inorganic linker ligands. Whereas CNs tend to exhibit rigid structures and permanent porosity as exemplified by most metal-organic frameworks, MOFs, there exists a small but growing class of CNs that can undergo extreme, reversible structural transformation(s) when exposed to gases, vapours or liquids. These "soft" or "stimuli-responsive" CNs were introduced two decades ago and are attracting increasing attention thanks to two features: the amenability of CNs to design from first principles, thereby enabling crystal engineering of families of related CNs; and the potential utility of soft CNs for adsorptive storage and separation. A small but growing subset of soft CNs exhibit reversible phase transformations between nonporous (closed) and porous (open) structures. These "switching CNs" are distinguished by stepped sorption isotherms coincident with phase transformation and, perhaps counterintuitively, they can exhibit benchmark properties with respect to working capacity (storage) and selectivity (separation). This review addresses fundamental and applied aspects of switching CNs through surveying their sorption properties, analysing the structural transformations that enable switching, discussing structure-function relationships and presenting design principles for crystal engineering of the next generation of switching CNs.

Revisiting molecular adsorption: unconventional uptake of polymer chains from solution into sub-nanoporous media

Adsorption of polymers from the solution phase has been extensively studied to cope with many demands not only for separation technologies, but also for the development of coatings, adhesives, and biocompatible materials. Most studies hitherto focus on adsorption on flat surfaces and mesoporous adsorbents with open frameworks, plausibly because of the preconceived notion that it is unlikely for polymers to enter a pore with a diameter that is smaller than the gyration diameter of the polymer in solution; therefore, sub-nanoporous materials are rarely considered as a polymer adsorption medium. Here we report that polyethylene glycols (PEGs) are adsorbed into sub-nanometer one-dimensional (1D) pores of metal-organic frameworks (MOFs) from various solvents. Isothermal adsorption experiments reveal a unique solvent dependence, which is explained by the balance between polymer solvation propensity for each solvent and enthalpic contributions that compensate for potential entropic losses from uncoiling upon pore admission. In addition, adsorption kinetics identify a peculiar molecular weight (MW) dependence. While short PEGs are adsorbed faster than long ones in single-component adsorption experiments, the opposite trend was observed in double-component competitive experiments. A two-step insertion process consisting of (1) an enthalpy-driven recognition step followed by (2) diffusion regulated infiltration in the restricted 1D channels explains the intriguing selectivity of polymer uptake. Furthermore, liquid chromatography using the MOFs as the stationary phase resulted in significant PEG retention that depends on the MW and temperature. This study provides further insights into the mechanism and thermodynamics behind the present polymer adsorption system, rendering it as a promising method for polymer analysis and separation.

Metal-Organic Frameworks as Versatile Media for Polymer Adsorption and Separation

Molecular recognition is of paramount importance for modern chemical processes and has now been achieved for small molecules using well-established host-guest chemistry and adsorption-science principles. In contrast, technologies for recognizing polymer structure are relatively undeveloped. Conventional polymer separation methods, which are mostly limited in practice to size-exclusion chromatography and reprecipitation, find it difficult to recognize minute structural differences in polymer structures as such small structural alterations barely influence the polymer characteristics, including molecular size, polarity, and solubility. Therefore, most of the polymeric products being used today contain mixtures of polymers with different structures as it is challenging to completely control polymer structures during synthesis even with state-of-the-art substitution and polymerization techniques. In this context, development of novel techniques that can resolve the challenges of polymer recognition and separation is in great demand, as these techniques hold the promise of a new paradigm in polymer synthesis, impacting not only materials chemistry but also analytical and biological chemistry.In biological systems, precise recognition and translation of base monomer sequences of mRNA are achieved by threading them through small ribosome tunnels. This principle of introducing polymers into nanosized channels can possibly help us design powerful polymer recognition and separation technologies using metal-organic frameworks (MOFs) as ideal and highly designable recognition media. MOFs are porous materials comprising organic ligands and metal ions and have been extensively studied as porous beds for gas separation and storage. Recently, we found that MOFs can accommodate large polymeric chains in their nanopores. Polymer chains can spontaneously infiltrate MOFs from neat molten and solution phases by threading their terminals into MOF nanochannels. Polymer structures can be recognized and differentiated due to such insertion processes, resulting in the selective adsorption of polymers on MOFs. This enables the precise recognition of the polymer terminus structure, resulting in the perfect separation of a variety of terminal-functionalized polymers that are otherwise difficult to separate by conventional polymer separation methods. Furthermore, the MOFs can recognize polymer shapes, thus enabling the large-scale separation of high purity cyclic polymers from the complex crude mixtures of linear polymers, which are used as precursor materials in common cyclization reactions. In solution-phase adsorption, many factors, including molecular weight, terminal groups, polymer shape, polymer-MOF interaction, and coexisting solvent molecules, influence the selective adsorption behavior; this yields a new liquid chromatography-based polymer separation technology using an MOF as the stationary phase. MOF-packed columns, in which a novel separation mode based on polymer insertion into the MOF operates under a dynamic insertion/rejection equilibrium at the liquid/solid interface, exhibited excellent polymer separation capability. The polymer recognition principle described in this study thus has a high probability for realizing previously unfeasible polymer separations based on monomer composition and sequences, stereoregularity, regioregularity, helicity, and block sequences in synthetic polymers and biomacromolecules.

Effect of Transition Metal Substitution on the Flexibility and Thermal Properties of MOF-Based Solid-Solid Phase Change Materials

A series of azobenzene-loaded metal-organic frameworks were synthesized with the general formula M₂(BDC)₂(DABCO)(AB)_x (M = Zn, Co, Ni, and Cu; BDC = 1,4-benzenedicarboxylate; DABCO = 1,4-diazabicyclo[2.2.2]octane; and AB = azobenzene), herein named M-1⊃AB_x. Upon occlusion of AB, each framework undergoes guest-induced breathing, whereby the pores contract around the AB molecules forming a narrow-pore (np) framework. The loading level of the framework is found to be very sensitive to the synthetic protocol and although the stable loading level is close to M-1⊃AB_1.0, higher loading levels can be achieved for the Zn, Co, and Ni frameworks prior to vacuum treatment, with a maximum composition for the Zn framework of Zn-1⊃AB_1.3. The degree of pore contraction upon loading is modulated by the inherent flexibility of the metal-carboxylate paddlewheel unit in the framework, with the Zn-1⊃AB_1.0 showing the biggest contraction of 6.2% and the more rigid Cu-1⊃AB_1.0 contracting by only 1.7%. Upon heating, each composite shows a temperature-induced phase transition to an open-pore (op) framework, and the enthalpy and onset temperatures of the phase transition are affected by the framework flexibility. For all composites, UV irradiation causes trans → cis isomerization of the occluded AB molecules. The population of cis-AB at the photostationary state and the thermal stability of the occluded cis-AB molecules are also found to correlate with the flexibility of the framework. Over a full heating-cooling cycle between 0 and 200 °C, the energy stored within the metastable cis-AB molecules is released as heat, with a maximum energy density of 28.9 J g^-1 for Zn-1⊃AB_1.0. These findings suggest that controlled confinement of photoswitches within flexible frameworks is a potential strategy for the development of solid-solid phase change materials for energy storage.

A Dynamic Chemical Clip in Supramolecular Framework for Sorting Alkylaromatic Isomers using Thermodynamic and Kinetic Preferences

Adsorptive chemical separation is at the forefront of future technologies, for use in chemical and petrochemical industries. In this process, a porous adsorbent selectively allows a single component from a mixture of three or more chemical components to be adsorbed or permeate. To separate the unsorted chemicals, a different adsorbent is needed. A unique adsorbent which can recognize and separate each of the chemicals from a mixture of three or more components is the necessity for the next generation porous materials. In this regard, we demonstrate a "dynamic chemical clip" in a supramolecular framework capable of thermodynamic and kinetics-based chemical separation. The dynamic space, featuring a strong preference for aromatic guests through π-π and C-H⋅⋅⋅π interactions and adaptability, can recognize the individual chemical isomers from mixtures and separate those based on thermodynamic and kinetic factors. The liquid-phase selectivity and separation of the aromatic isomers are possible by the adaptability of the "chemical clip" and here we elucidate the prime factors in a combinatorial approach involving crystallographic evidence and detailed computational studies.

Constructing multicomponent cooperative functional systems using metal complexes of short flexible peptides

The construction of cooperative systems comprising several units is an essential challenge for artificial systems toward the development of sophisticated functions comparable to those found in biological systems. Flexible frameworks possessing various functional groups that can form weak intra/intermolecular interactions similar to those observed in biological systems have promising design features for artificial systems used to control cooperative systems. However, it is difficult to construct multiple component systems >1 nm using these flexible units by controlling the arrangement of functional units, beginning with the precise control of the cooperative switching of multiple units. In general, it is difficult for oligopeptides to form stable conformations by themselves, although they have designability and structural features suitable for the development of cooperative systems. Increasing the number of coordination bonds in peptides, which are stronger than hydrogen bonds, can be used to control the assembled peptide structures and stabilize their structures owing to the variety of coordination bonds and selective binding affinity. Thus, metal complexes of artificial short peptides have great potential for the development of multicomponent cooperative systems. Based on this concept, we have developed a series of novel metal complexes of flexible peptides and have achieved, to date, cooperative systems, the formation of giant structures, and precise control over the functional units that are the essential bases for designable multifunctional systems that can be regarded as artificial enzymes. In this feature article, we summarize these results and discuss the principal/essential design of artificial systems.

A Porous Coordination Polymer Showing Guest-Amplified Positive and Negative Thermal Expansion

A solvothermal reaction of Zn(NO₃)₂ and 4-(1H-pyrazol-4-yl)benzoic acid (H₂pba) with toluene (Tol) as the template yielded a porous coordination polymer, [Zn(pba)]·0.5Tol, possessing a three-dimensional (3D) fence-like coordination framework based on inclined two-dimensional (2D) fence-like coordination layers. By virtue of the classic deformation mode of the 2D/3D fence structures, the guest-free structure exhibits very large positive thermal expansion of 347 MK^-1 and moderate negative thermal expansion of -63/-83 MK^-1, which are remarkably enhanced to new records of 689 and -171/-249 MK^-1, respectively, by inclusion of Tol.

Highly Porous Ionic Solids Consisting of AuI3CoIII2 Complex Anions and Aqua Metal Cations

Treatment of Na₃[Au₃Co₂(d-pen)₆] (Na₃[1]; d-H₂pen = d-penicillamine) with M(OAc)₂ (M = Ni^II, Mn^II) in water gave ionic crystals of [M(H₂O)₆]₃[1]₂ (2^M) in which [1]^3- anions are hydrogen-bonded with [M(H₂O)₆]²⁺ cations to form a 3D porous framework with a porosity of ca. 80%. Soaking crystals of 2^Ni in its mother liquor afforded crystals of [Ni(H₂O)₆]₂[{Ni(H₂O)₄}(1)₂] (3^Ni) in which [1]^3- anions are connected to trans-[Ni(H₂O)₄]²⁺ and [Ni(H₂O)₆]²⁺ cations through coordination and hydrogen bonds, respectively, to form a 1D porous framework with a porosity ca. 60%. Further soaking crystals led to [{Ni(H₂O)₄}₃(1)₂] (4^Ni), in which [1]^3- anions are connected to cis-[Ni(H₂O)₄]²⁺ and trans-[Ni(H₂O)₄]²⁺ cations through coordination bonds in a dense framework with a porosity of ca. 30%. A similar two-step crystal-to-crystal transformation mediated by solvent proceeded when crystals of 2^Mn were soaked in a mother liquor. However, the transformation of 2^Mn generated [{Mn(H₂O)₄}(H1)] (4'^Mn) as the final product, in which [H1]^2- anions are connected to cis-[Mn(H₂O)₄]²⁺ cations through coordination bonds in a very dense framework with a porosity ca. 5% by way of [Mn(H₂O)₆]₂[{Mn(H₂O)₄}(1)₂] (3^Mn), which is isostructural with 3^Ni. While all the compounds adsorbed H₂O and CO₂ depending on the degree of their porosity, unusually large NH₃ adsorption capacities were observed for 4^Ni and 4'^Mn, which have dense frameworks.

Continuous Breathing Rare-Earth MOFs Based on Hexanuclear Clusters with Gas Trapping Properties

Guest responsive porous materials represent an important and fascinating class of multifunctional solids that have attracted considerable attention in recent years. An understanding of how these structures form is essential toward their rational design, which is a prerequisite for the development of tailor-made materials for advanced applications. We herein report a novel series of stable rare-earth (RE) MOFs that show a rare continuous breathing behavior and an unprecedented gas-trapping property. We used an asymmetric 4-c tetratopic carboxylate-based organic ligand that is capable of affording highly crystalline materials upon controlled reaction with RE cations. These MOFs, denoted as RE-thc-MOF-1 (RE: Y³⁺, Sm³⁺, Eu³⁺, Tb³⁺, Dy³⁺, Ho³⁺, and Er³⁺), feature hexanuclear RE₆ clusters that display a highly unusual connectivity and serve as unique 8-c hemi-cuboctahedral secondary building block, resulting in a new (3,3,8)-c thc topology. Extensive single-crystal to single-crystal structural analyses coupled with detailed gas (N₂, Ar, Kr, CO₂, CH₄, and Xe) and vapor (EtOH, CH₃CN, C₆H₆, and C₆H₁₄) sorption studies, supported by accurate theoretical calculations, shed light onto the unique swelling behavior. The results reveal a synergistic action involving steric effects, associated with coordinated solvent molecules and 2-fluorobenzoate (2-FBA) nonbridging ligands, as well as cation-framework electrostatic interactions. We were able to probe the individual role of the coordinated solvent molecules and 2-FBA ligands and found that both cooperatively control the gas-breathing and -trapping properties, while 2-FBA controls the vapor adsorption selectivity. These findings provide unique opportunities toward the design and development of tunable RE-based flexible MOFs with tailor-made properties.

Post-Synthetic Modification Unlocks a 2D-to-3D Switch in MOF Breathing Response: A Single-Crystal-Diffraction Mapping Study

Post‐synthetic modification (PSM) of the interpenetrated diamondoid metal–organic framework (Me₂NH₂)[In(BDC‐NH₂)₂] (BDC‐NH₂=aminobenzenedicarboxylate) SHF‐61 proceeds quantitatively in a single‐crystal‐to‐single‐crystal manner to yield the acetamide derivative (Me₂NH₂)[In(BDC‐NHC(O)Me)₂] SHF‐62. Continuous breathing behaviour during activation/desolvation is retained upon PSM, but pore closing now leads to ring‐flipping to avert steric clash of amide methyl groups of the modified ligands. This triggers a reduction in the amplitude of the breathing deformation in the two dimensions associated with pore diameter, but a large increase in the third dimension associated with pore length. The MOF is thereby converted from predominantly 2D breathing (in SHF‐61) to a distinctly 3D breathing motion (in SHF‐62) indicating a decoupling of the pore‐width and pore‐length breathing motions. These breathing motions have been mapped by a series of single‐crystal diffraction studies.

Slacking of Gate Adsorption Behavior on Metal-Organic Frameworks under an External Force

As flexible metal-organic frameworks (MOFs) and their gate adsorption behaviors are increasingly expected to be used in gas storage and separation systems, evaluating their performance by considering their usage patterns in actual processes is becoming increasingly important. Herein, we show that the shaping of the elastic layer-structured MOF-11 (ELM-11; [Cu(BF₄)₂(4,4'-bipyridine)₂]) into pellet forms using polymer binders smears its stepwise uptake associated with the CO₂ gate adsorption. This is a critical problem because the superior adsorption properties of flexible MOFs are highly dependent on the sharpness of the step. Free energy analysis by molecular simulations revealed that the slacking of the gate adsorption is natural from a thermodynamic point of view. In other words, the external force exerted by the polymer binders, which prevents the expansion of MOF particles upon the gate opening, changes the free energy landscape of the system. This causes the flexible motifs within the MOF particles to undergo a structural transition at slightly different pressures from each other. The force profile dependence of the slacking phenomenon on both adsorption and desorption isotherms was also investigated. It was revealed that controlling the force profile applied to MOF particles is important to mold MOF pellets that satisfy the robustness and sharpness of the gate adsorption. Finally, we examined the coating of pellets to verify the relationship between the force profile and the degree of slacking and discussed possible strategies to improve the sharpness of the gate adsorption on MOF pellets considering the revealed mechanism.

Massive Pressure Amplification by Stimulated Contraction of Mesoporous Frameworks*

Herein we demonstrate mesoporous frameworks interacting with carbon dioxide leading to stimulated structural contractions and massive out-of-equilibrium pressure amplification well beyond ambient pressure. Carbon dioxide, a non-toxic and non-flammable working medium, is promising for the development of pressure-amplifying frameworks for pneumatic technologies and safety systems. The strong interaction of the fluid with the framework even contracts DUT-46, a framework hitherto considered as non-flexible. Synchrotron-based in situ PXRD/adsorption experiments reveal the characteristic contraction pressure for DUT-49 pressure amplification in the range of 350-680 kPa. The stimulated framework contraction expels 1.1 to 2.4 mmol g-1 CO2 leading to autonomous pressure amplification in a pneumatic demonstrator system up to 428 kPa. According to system level estimations even higher theoretical pressure amplification may be achieved between 535 and 1011 kPa.

Impact of Crystal Size and Morphology on Switchability Characteristics in Pillared-Layer Metal-Organic Framework DUT-8(Ni)

Variation of the crystallite size in flexible porous coordination polymers can significantly influence or even drastically change the flexibility characteristics. The impact of crystal morphology, however, on the dynamic properties of flexible metal-organic frameworks (MOFs) is poorly investigated so far. In the present work, we systematically modulated the particle size of a model gate pressure MOF (DUT-8(Ni), Ni2(2,6-ndc)2(dabco), 2,6-ndc-2,6-naphthalenedicarboxylate, dabco-1,4-diazabicyclo[2.2.2]octane) and investigated the influence of the aspect ratio, length, and width of anisotropically shaped crystals on the gate opening characteristics. DUT-8 is a member of the pillared-layer MOF family, showing reversible structural transition, i.e., upon nitrogen physisorption at 77 K. The framework crystalizes as rod-like shaped crystals in conventional synthesis. To understand which particular crystal surfaces dominate the phenomena observed, crystals similar in size and differing in morphology were involved in a systematic study. The analysis of the data shows that the width of the rods (corresponding to the crystallographic directions along the layer) represents a critical parameter governing the dynamic properties upon adsorption of nitrogen at 77 K. This observation is related to the anisotropy of the channel-like pore system and the nucleation mechanism of the solid-solid phase transition triggered by gas adsorption.

Photoconductive Coordination Polymer with a Lead-Sulfur Two-Dimensional Coordination Sheet Structure

Coordination polymers with metal-sulfur (M-S) bonds in their nodes have interesting optical properties and can be used as photocatalysts for water splitting. A wide range of inorganic-organic hybrid materials with M-S bonds have been prepared in recent years. However, there is a dearth of structural information because of their low crystallinity, which has hampered the understanding of their underlying chemistry and physics. Thus, we conducted a structural study of a novel, highly crystalline coordination polymer with M-S bonds. Theoretical calculations were performed to elucidate its photoconductivity mechanism. The photoconductive, three-dimensional coordination polymer [Pb(tadt)]n (denoted as KGF-9; tadt = 1,3,4-thiadiazole-2,5-dithiolate) was synthesized and confirmed to have a three-dimensional structure containing a two-dimensional Pb-S framework by single-crystal X-ray diffraction. We also performed diffuse-reflectance ultraviolet-visible-near-infrared spectroscopy, time-resolved microwave conductivity, and photoelectron yield spectroscopy measurements on the bulk powder samples, as well as first-principles calculations. Additionally, direct-current photoconductivity measurements were conducted on a single-crystal sample.

Tuning the Structural Flexibility for Multi-Responsive Gas Sorption in Isonicotinate-Based Metal-Organic Frameworks

Flexible metal-organic frameworks (MOFs) are of high interest as smart programmable materials for gas sorption due to their unique structural changes triggered by external stimuli. Owing to this property, which leads to opportunities such as maximizing deliverable gas capacity, flexible MOFs sometimes offer more advantages in sorption applications compared to their more rigid counterparts. Herein, we elucidate the effect of transition metal identity of a series of isonicotinate-based flexible MOFs, M(4-PyC)₂ [M═Mg, Mn, and Cu; 4-PyC = 4-pyridine carboxylic acid] on the structural dynamic response to different gases (C₂H₄, C₂H₆, Xe, Kr, and SO₂). Isotherms at different temperatures show that C₂H₄, C₂H₆, and Xe can form sufficiently strong interactions with both Mg(4-PyC)₂ and Mn(4-PyC)₂ frameworks resulting in gate-opening behavior due to the rotation of the linker's pyridine ring, while Kr cannot induce this phenomenon for the two MOFs under the measured conditions. In contrast, the gate-opening behavior occurs for Cu(4-PyC)₂ solely in the presence of C₂H₄, and no other measured gas, due to the open metal sites of Cu centers. In comparison, SO₂, a strong polar molecule, triggers the gate-opening effect in all three MOFs. Interestingly, a shape memory effect is observed for Cu(4-PyC)₂ during the second SO₂ sorption cycle. When comparing the different gate-opening pressures of each gas, we observed that the structural flexibility of the three frameworks is highly sensitive to the chemical hardness of the Lewis acidic metal ions (Mg²⁺ > Mn²⁺ > Cu²⁺). As a result, the gate opening behavior is observed at lower pressures for the MOFs containing weaker M-N bonds (harder metal ions), with the exception of Cu(4-PyC)₂ toward C₂H₄. These observations reveal that different transition metals can be used to finely control the structural flexibility of the frameworks.

Emergent electrochemical functions and future opportunities of hierarchically constructed metal-organic frameworks and covalent organic frameworks

Designing spatial and architectural features across from the molecular to bulk scale is one of the most important topics in materials science which has received a lot of attention in recent years. Looking back to the past research, findings on the influences of spatial features denoted as porous structures on the applications related to mass transport phenomena have been widely studied in traditional inorganic materials, such as ceramics over the past two decades. However, due to the difficulties in precise control of the porous structures at the molecular level in this class of materials, the mechanistic understanding of the effects of spatial and architectural features across from the molecular level to meso-/macroscopic scale is still lacking, especially in electrochemical reactions. Further understanding of fundamental electrochemical functions in well-defined architectures is indispensable for the further advancement of key next-generation energy devices. Furthermore, creating periodic porosity in reticular structures is starting to be recognized as an emerging approach to control the electronic structure of materials. In this review, we focus on the investigations on preparing well-defined molecular-level crystalline porous materials known as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) into hierarchically constructed architectures from molecular structures lower than the reticular frameworks to meso-/macroscopic scale structures. By connecting well-defined nanosized porous structures in MOFs/COFs and additional length-scale space or shapes, emergent electrochemical functions towards emerging devices, such as beyond Li-ion batteries including all-solid-state rechargeable batteries, are expected to be obtained. By summarizing recent advancements in synthetic strategies of hierarchically constructed MOF/COF based materials and fundamental investigation of their structural effect in a wide spectrum of electrochemical applications, we highlight the importance and future direction of this developing field of hierarchically constructed MOFs/COFs, while emphasizing the required chemical stability of the MOFs/COFs which meet the use in the game-changing electrochemical devices.