Biodegradation of micro-polyethylene particles by bacterial colonization of a mixed microbial consortium isolated from a landfill site

Distinct Bacterial and Fungal Communities Colonizing Waste Plastic Films Buried for More Than 20 Years in Four Landfill Sites in Korea

Plastic pollution has been recognized as a serious environmental problem, and microbial degradation of plastics is a potential, environmentally friendly solution to this. Here, we analyzed and compared microbial communities on waste plastic films (WPFs) buried for long periods at four landfill sites with those in nearby soils to identify microbes with the potential to degrade plastics. Fourier-transform infrared spectroscopy spectra of these WPFs showed that most were polyethylene and had signs of oxidation, such as carbon-carbon double bonds, carbon-oxygen single bonds, or hydrogen-oxygen single bonds, but the presence of carbonyl groups was rare. The species richness and diversity of the bacterial and fungal communities on the films were generally lower than those in nearby soils. Principal coordinate analysis of the bacterial and fungal communities showed that their overall structures were determined by their geographical locations; however, the microbial communities on the films were generally different from those in the soils. For the pulled data from the four landfill sites, the relative abundances of Bradyrhizobiaceae, Pseudarthrobacter, Myxococcales, Sphingomonas, and Spartobacteria were higher on films than in soils at the bacterial genus level. At the species level, operational taxonomic units classified as Bradyrhizobiaceae and Pseudarthrobacter in bacteria and Mortierella in fungi were enriched on the films. PICRUSt analysis showed that the predicted functions related to amino acid and carbohydrate metabolism and xenobiotic degradation were more abundant on films than in soils. These results suggest that specific microbial groups were enriched on the WPFs and may be involved in plastic degradation.

Biodegradation of polyethylene by Meyerozyma guilliermondii and Serratia marcescens isolated from the gut of waxworms (larvae of Plodia interpunctella)

The widespread use of polyethylene (PE) causes a large amount of indigestible plastic waste. Waxworms (the larvae of Plodia interpunctella) can eat PE, but the degradation principle of PE under the action of intestinal microorganisms is still unclear, especially the insufficient research on key degradable PE strains. In this study, we fed waxworms with PE. Two strains with high PE degradation efficiency were isolated and purified, and the effects of single and microbial consortia on PE degradation were evaluated by water contact angle (WCA), FTIR, GC-MS, SEM and RT-qPCR. The results showed that Meyerozyma guilliermondii ZJC1 (MgZJC1) and Serratia marcescens ZJC2 (SmZJC2) could degrade PE. However, the degradation efficiency of the microbial consortium was higher, and the weight loss rate of PE was 15.87 %. In addition, the PE degradation products of MgZJC1 were C₉H₁₀O, C₂₀H₁₅NO, C₂₈H₄₄O₃ and C₁₆H₃₂O₂, and the PE degradation products of SmZJC2 were C₁₆H₁₈O, C₁₄H₁₈N₂O₇ and C₃₁H₄₈O₆. The PE degradation products of the microbial consortium were C₁₁H₂₄, C₁₉H₁₀O, C₁₅H₃₂, C₁₄H₃₀, C₁₆H₃₄, C₂₅H₅₂ and C₂₇H₅₆. RT-qPCR results showed that SmZJC2 promoted PE degradation by upregulating the expression of multiple genes, such as multicopper oxidase genes (PiSm-CueO). MgZJC1 responded to carbon deficiency by upregulating the expression of multiple genes, such as key enzyme genes in the tricarboxylic acid (TCA) cycle. This study can be used to develop an efficient microbial consortium for PE degradation and provide a basis for the reuse of PE waste. It can also provide a research basis for the joint degradation of PE by microbial consortia composed of bacteria and fungi.

Marine-Derived Actinomycetes: Biodegradation of Plastics and Formation of PHA Bioplastics-A Circular Bioeconomy Approach

Plastics are present in the majority of daily-use products worldwide. Due to society's production and consumption patterns, plastics are accumulating in the environment, causing global pollution issues and intergenerational impacts. Our work aims to contribute to the development of solutions and sustainable methods to mitigate this pressing problem, focusing on the ability of marine-derived actinomycetes to accelerate plastics biodegradation and produce polyhydroxyalkanoates (PHAs), which are biodegradable bioplastics. The thin plastic films' biodegradation was monitored by weight loss, changes in the surface chemical structure (Infra-Red spectroscopy FTIR-ATR), and by mechanical properties (tensile strength tests). Thirty-six marine-derived actinomycete strains were screened for their plastic biodegradability potential. Among these, Streptomyces gougerotti, Micromonospora matsumotoense, and Nocardiopsis prasina revealed ability to degrade plastic films-low-density polyethylene (LDPE), polystyrene (PS) and polylactic acid (PLA) in varying conditions, namely upon the addition of yeast extract to the culture media and the use of UV pre-treated thin plastic films. Enhanced biodegradation by these bacteria was observed in both cases. S. gougerotti degraded 0.56% of LDPE films treated with UV radiation and 0.67% of PS films when inoculated with yeast extract. Additionally, N. prasina degraded 1.27% of PLA films when these were treated with UV radiation, and yeast extract was added to the culture medium. The main and most frequent differences observed in FTIR-ATR spectra during biodegradation occurred at 1740 cm^-1, indicating the formation of carbonyl groups and an increase in the intensity of the bands, which indicates oxidation. Young Modulus decreased by 30% on average. In addition, S. gougerotti and M. matsumotoense, besides biodegrading conventional plastics (LDPE and PS), were also able to use these as a carbon source to produce degradable PHA bioplastics in a circular economy concept.

Microbial degradation of virgin polyethylene by bacteria isolated from a landfill site

Abstract

In this study we evaluate the extent of degradation of high-density polyethylene by bacterial isolates obtained from landfill. The microorganisms are isolated from plastic wastes deposited in the landfill for 2–3 years and 17 years. Experiments are conducted under laboratory conditions to degrade virgin high-density polyethylene used in the manufacture of packaging materials. Gravimetric and GC–MS analyses are performed to describe polyethylene decomposition. Of all the bacterial isolates tested, the degradation of polyethylene by Bacillus cereus is the highest, 1.78%, based on weight loss. On the other hand, degradation by Pseudomonas tuomurensis is 0.3%. Degradation products are detected, confirming the progressive degradation of the plastic. The hydrocarbons with single and double bonds are observed most frequently. Our study provides insight into the microbial biodegradation of polyethylene in the environment and contributes to the understanding of the biodegradation processes that may occur in landfills and their progress.

Article Highlights

Change in adsorption behavior of aquatic humic substances on microplastic through biotic and abiotic aging processes

Interactions between microplastics (MPs) and humic substances (HS) are inevitable in MP-contaminated aquatic environment because of the ubiquitous presence of HS. In this study, we explored the effects of abiotic and biotic aging processes on the adsorption behavior of aquatic HS on MPs. Aging experiments were conducted using polyethylene (PE) as a representative MP, in which UV irradiation and microbial incubation were applied for 15 to 18 days to mimic the natural abiotic and biotic aging processes. Surface modifications after the aging treatments were evidenced by the appearance of CO, CO, O-C=O, and -OH groups; the formation of grooves on UV-aged PE; and the formation of biofilms on the surface of bio-aged PE. The specific surface areas of both treated PE MPs increased with aging. Higher HS adsorption on PE surface was observed after the aging treatments, with a highest kinetic rate for UV-aged PE than that for bio-aged PE. The adsorption isotherm models revealed that the aging processes enhanced the HS adsorption tendency, as evidenced by the highest adsorption capacity for UV-aged PE (~187 μg C/m²), followed by bio-aged PE (~157 μg C/m²) and pristine PE (~87.5 μg C/m²) for a comparable extended aging period (15-18 days). The difference was more pronounced at a lower pH. The enhanced HS adsorption was mainly attributed to the formation of hydrogen bonds, whereas HS adsorption on pristine PE was dominated by hydrophobic interactions and weak van der Waals interactions. Among the two identified fluorescent components (terrestrial humic-like C1 and protein-like C2), C1 exhibited a higher affinity for adsorption onto PE irrespective of aging. Our findings provide insights into the substantial changes that occur in the interactions between MPs and aquatic organic matter with aging processes, which may alter the fate and environmental impacts of MPs in many aquatic systems.

Microplastics in aquatic systems, a comprehensive review: origination, accumulation, impact, and removal technologies

Although the discovery of plastic in the last century has brought enormous benefits to daily activities, it must be said that its use produces countless environmental problems that are difficult to solve. The indiscriminate use and the increase in industrial production of cleaning, cosmetic, packaging, fertilizer, automotive, construction and pharmaceutical products have introduced tons of plastics and microplastics into the environment. The latter are of greatest concern due to their size and their omnipresence in the various environmental sectors. Today, they represent a contaminant of increasing ecotoxicological interest especially in aquatic environments due to their high stability and diffusion. In this regard, this critical review aims to describe the different sources of microplastics, emphasizing their effects in aquatic ecosystems and the danger to the health of living beings, while examining, at the same time, those few modelling studies conducted to estimate the future impact of plastic towards the marine ecosystem. Furthermore, this review summarizes the latest scientific advances related to removal techniques, evaluating their advantages and disadvantages. The final purpose is to highlight the great environmental problem that we are going to face in the coming decades, and the need to develop appropriate strategies to invert the current scenario as well as better performing removal techniques to minimize the environmental impacts of microplastics.

The application of bioremediation in wastewater treatment plants for microplastics removal: a practical perspective

Wastewater treatment plants (WWTPs) play the role of intercepting microplastics in the environment and provide a platform for bioremediation to remove microplastics. Despite, this opportunity has not been adequately studied. This paper shows the potential ways microplastics-targeted bioremediation could be incorporated into wastewater treatment through the review of relevant literature on bioaugmentation of water treatment processes for pollutants removal. Having reviewed more than 90 papers in this area, it highlights that bioremediation in WWTPs can be employed through bioaugmentation of secondary biological treatment systems, particularly the aerobic conventional activated sludge, sequencing batch reactor, membrane bioreactor and rotating biological contactor. The efficiency of microplastics removal, however, is influenced by the types and forms of microorganisms used, the polymer types and the incubation time (100% for polycaprolactone with Streptomyces thermoviolaceus and 0.76% for low-density polyethylene with Acinetobacter iwoffii). Bioaugmentation of anaerobic system, though possible, is constrained by comparatively less anaerobic microplastics-degrading microorganisms identified. In tertiary system, bioremediation through biological activated carbon and biological aerated filter can be accomplished and enzymatic membrane reactor can be added to the system for deployment of biocatalysts. During sludge treatment, bioaugmentation and addition of enzymes to composting and anaerobic digestion are potential ways to enhance microplastics breakdown. Limitations of bioremediation in wastewater treatment include longer degradation time of microplastics, incomplete biodegradation, variable efficiency, specific microbial activities and uncertainty in colonization. This paper provides important insight into the practical applications of bioremediation in wastewater treatment for microplastics removal.

Microplastics spatiotemporal distribution and plastic-degrading bacteria identification in the sanitary and non-sanitary municipal solid waste landfills

The municipal solid waste landfill (MSWL) is an important source of microplastics (MPs) and a huge bioreactor for plastic-degrading microorganisms (PDM). However, the spatiotemporal distribution and degradation mechanisms of MPs in MSWLs are unclear. Therefore, they were studied using the samples drilled in a sanitary landfill (SL) and an non-sanitary landfill (NSL). The results showed that there were a lot of polyethylene (PE), polypropylene (PP), polystyrene (PS), polyurethane (PU), Polyamide (PA), Polyethylene terephthalate (PET) and Polyvinyl chloride (PVC) in the landfill, and their abundance ranged from 0 to 80 items/g. The MPs surface gradually faded, became rough and even yielded cracks and holes with the landfill depth and age increase. The tiny-size MPs (< 100 µm) were the most abundant and their amount significantly increased from 28.14% to 49.13% in SL and from 24.54% to 59.51% in NSL, respectively, while large-size MPs were significantly reduced from the top to the bottom. Lysinibacillus (0.21%~67.87%) and Bacillus (0.10%~67.00%) were the dominate PDMs in SL and Candidatus_Caldatribacterium (5.06%~73.48%) was the dominate in NSL. The PE degradation was closely related to Candidatus_Cloacimonas (r = 0.688*) and Candidatus_Caldatribacterium (r = 0.680*); PS and PA were closely related to Candidatus_Contubernalis (r = 0.595*~0.705*) and PVC was closely related to Candidatus_Caldatribacterium (r = 0.547*). In addition to physical and chemical effects, biological effects can also promote the MPs formation in MSWLs.

Recovery of value-added products from biowaste: A review

This review provides an update on the state-of-the art technologies for the valorization of solid waste and its mechanism to generate various bio-products. The organic content of these wastes can be easily utilized by the microbes and produce value-added compounds. Microbial fermentation techniques can be utilized for developing waste biorefinery processes. The utilization of lignocellulosic and plastics wastes for the generation of carbon sources for microbial utilization after pre-processing steps will make the process a multi-product biorefinery. The C1 and C2 gases generated from different industries could also be utilized by various microbes, and this will help to control global warming. The review seeks to expand expertise about the potential application through several perspectives, factors influencing remediation, issues, and prospects.

Environmental toxicity and decomposition of polyethylene

In the more than 100 years since the invention of plastics, various plastic polymers have been developed that exhibit different characteristics and have been widely used in production and life. In 2020 alone, nearly 400 million tons of plastics were produced globally. However, while plastic such as polyethylene brings us convenience, it also threatens environmental sustainability and human health. Due to insufficient recycling efficiency, millions of tons of polyethylene pollutants accumulate in terrestrial or marine environments each year. Polyethylene is elastic, chemically stable, and non-biodegradable, and the traditional disposal methods include landfilling and incineration. These methods are costly, unsustainable, and further increase the burden on the environment. Therefore, recent research has increasingly focused on the biodegradation of polyethylene. In this work, we briefly summarized polyethylene's properties and environmental toxicity. We also reviewed the recent advances in the biodegradation of polyethylene with a summary of traditional abiotic methods. Finally, we proposed a brief research direction in polyethylene study with the aspect of environmental toxicology and industrial applications of decomposition technology.

Recent advances in the breakdown of microplastics: strategies and future prospectives

Microplastics pollution is becoming a major environmental issue, and exposure to microplastics has been associated with numerous adverse results to both the ecological system and humans. This work summarized the state-of-the-art developments in the breakdown of microplastics, including natural weathering, catalysts-assisted breakdown and biodegradation. Characterization techniques for microplastic breakdown involve scanning electron microscopy, Fourier infrared spectroscopy, X-ray photoelectron spectroscopy, etc. Bioavailability and adsorption capacity of microplastics may change after they are broken down, therefore leading to variety in microplastics toxicity. Further prospectives for should be focused on the determination and toxicity evaluation of microplastics breakdown products, as well as unraveling uncultivable microplastics degraders via cultivation-independent approaches. This work benefits researchers interested in environmental studies, particularly the removal of microplastics from environmental matrix.

A comprehensive review on recent advancements in biodegradation and sustainable management of biopolymers

Recent years have seen upsurge in plastic manufacturing and its utilization in various fields, such as, packaging, household goods, medical applications, and beauty products. Due to various adverse impacts imposed by synthetic plastics on the health of living well-being and the environment, the biopolymers have been emerged out an alternative. Although, the biopolymers such as polyhydroxyalkanoates (PHA) are entirely degradable. However, the other polymers, such as poly (lactic acid) (PLA) are only partially degradable and often not biosynthesized. Biodegradation of the polymers using microorganisms is considered an effective bioremediation approach. Biodegradation can be performed in aerobic and anaerobic environments. In this context, the present review discusses the biopolymer production, their persistence in the environment, aerobic biodegradation, anaerobic biodegradation, challenges associated with biodegradation and future perspectives. In addition, this review discusses the advancement in the technologies associated with biopolymer production, biodegradation, and their biodegradation standard in different environmental settings. Furthermore, differences in the degradation condition in the laboratory as well as on-site are discussed.

Degradation of Uranium-Contaminated Decontamination Film by UV Irradiation and Microbial Biodegradation

This research provides a complete degradation scheme for acrylic copolymer/cellulose acetate butyrate peelable decontamination films. This study analyzed the removal efficiency of uranium by peelable decontamination film. More importantly, the degradability of the films was evaluated by a combined treatment with UV radiation and microbial biodegradation. The results showed that UV radiation would rupture the surface of the decontamination films, which leaded the weight-average molecular weight decreased by 55.3% and number-average molecular weight decreased by 75.83%. Additionally, the microbial flora induced light-degradable decontamination film weight-average molecular weight and number-average molecular weight decreased by 9.3% and 30.73%, respectively. 16S rRNA microbial diversity analysis indicated that Pantoea, Xylella, Cronobacter, and Olivibacter were the major degrading bacteria genera. Among them, 4 key strains that can be stripped of decontamination films have been isolated and identified from the dominant degrading bacteria group. The results show that UV radiation combined with microbial flora can achieve rapid degradation of the decontamination films.

Biodegradation of thermo-oxidative pretreated low-density polyethylene (LDPE) and polyvinyl chloride (PVC) microplastics by Achromobacter denitrificans Ebl13

Microplastics pretreatment of prior to biodegradation is an efficient approach for their bioremediation. We isolated Achromobacter denitrificans from compost and used it for biodegradation of thermo-oxidative pretreated polyvinyl chloride (PVC) and low-density polyethylene (LDPE). About 12.3 % and 6.5 % weight loss, and 326.4 and 112.32 mg L^-1 extracellular protein were observed in bacterial flasks with PVC and LDPE, respectively. The pH in treated PVC reached to 5.12 and the thermal stability increased by 29 °C. The chemical modification in LDPE was demonstrated through oxidation of antioxidants (Phenol group), formation of new groups (Aldehyde group), and chain fracture in the main backbone by Fourier transform infrared spectroscopy. Formation of peaks at the range of 1700-1850 cm^-1 in LDPE attributed to formation of carbonyl groups as the degradation result. Scanning electron microscopy confirmed LDPE and PVC degradation by surface alterations. Consequently, thermo-oxidative pretreatment can be considered as a suitable strategy for improving microplastics biodegradation.

Induced aging, structural change, and adsorption behavior modifications of microplastics by microalgae

The effects of microalgal biofouling on microplastic (MP) may differ from bacterial biofouling. In this study, the influence of microalgae on MP surface alteration, structural change, and adsorption of organic micropollutants was evaluated. Virgin polyethylene (PE), polyvinyl chloride (PVC), and polyamide (PA) were each immersed in algal photobioreactor and river freshwater for 30 days to simulate algal and river microbe biofouling respectively. Consequently, their physicochemical changes and adsorption potential of a mixture of six bisphenol analogues (BPA, BPS, BPE, BPB, BPF, BPAF) and two parabens (propyl-paraben, benzyl-paraben) were investigated. Owing to the algal bioactive compounds, major microalgae-induced biofouling and more MP aging than the river microbe aging were observed through fractures, pits, cracks, and algal attachments. Intrusion of algal organic matter and scission of polymeric functional groups were revealed during microalgal immersion and the potential MP aging pathways were proposed. Algal biofouling considerably altered the intrinsic properties of the MPs, consequently the adsorption capacity of PE and PVC was enhanced by 3.04-6.72 and 2.14-8.72 times, respectively. Adsorption process onto algal-aged MPs was pH-dependent, endothermic, non-spontaneous, and favored by hydrogen bonds. Meanwhile, the amide group in PA structure was conducive to organic micropollutant adsorption, which was likely reduced by algal aging and the erosion of the N-H stretching. Moreover, higher adsorption capacities of organic micropollutants were shown by the algal-biofilm PE and PVC than virgin and river microbial biofilm MPs. This study discloses that, biofouling and aging of MPs by microalgae through their bioactive components would engender more incidences on MP properties, organic micropollutants adsorption with associated environmental and health hazards.

Current Advances in Biodegradation of Polyolefins

Polyolefins, including polyethylene (PE), polypropylene (PP) and polystyrene (PS), are widely used plastics in our daily life. The excessive use of plastics and improper handling methods cause considerable pollution in the environment, as well as waste of energy. The biodegradation of polyolefins seems to be an environmentally friendly and low-energy consumption method for plastics degradation. Many strains that could degrade polyolefins have been isolated from the environment. Some enzymes have also been identified with the function of polyolefin degradation. With the development of synthetic biology and metabolic engineering strategies, engineered strains could be used to degrade plastics. This review summarizes the current advances in polyolefin degradation, including isolated and engineered strains, enzymes and related pathways. Furthermore, a novel strategy for polyolefin degradation by artificial microbial consortia is proposed, which would be helpful for the efficient degradation of polyolefin.

Resource Cycling: Application of Anaerobic Utilization Methods

Human activity and modern production contribute to the formation of a certain amount of waste that can be recycled to obtain useful products and energy sources. Today, the higher the level of industrial development, the greater the amount of waste generated, and as a result, the more important the need for disposal. A similar pattern is typical for any human production activity; as a result of large-scale production, at least 70–80% of waste is generated in relation to the amount of raw materials used. The large-scale use of polymeric materials and the plastic waste generated after their use lead to environmental pollution. While a small part of the waste is utilized naturally due to the vital activity of soil microorganisms, and a part is purposefully processed by humans into products for various purposes, a fairly large amount of waste occupies large areas in the form of a variety of garbage. After the removal of garbage by incineration, the liberated territories cannot be transferred to agricultural land due to the high content of harmful contaminants. The harm to the environment is quite obvious. In practice, certain types of waste consist of more than 70% content of valuable substances that can find further practical application in a wide variety of industries.

Long-term interactions between microplastics and floating macrophyte Lemna minor: The potential for phytoremediation of microplastics in the aquatic environment

The presence of microplastics (MPs) in the environment has raised many concerns, and therefore approaches and technologies to remove them in situ are of high interest. In this context, we investigated the interactions between polyethylene MPs (fragments with a mean size of 149 ± 75 μm) and an aquatic floating macrophyte Lemna minor in order to assess its potential use for in situ phytoremediation. We first investigated the long-term effects of a high (100 mg/L = 9600 MPs/L), but still environmentally relevant concentration of MPs on L. minor. Subsequently bioadhesion of MPs was studied and the number and strength of MPs adhering to plant biomass were assessed. MPs did not adversely affect various parameters of plants (e.g., specific growth rate, chlorophyll contents, total antioxidant capacity, electron transport system activity, and contents of energy-rich molecules) throughout the duration of the experiment (12 weeks), except for the first week of the experiment, when protein content and total antioxidant capacity were affected. On the other hand, MPs affected the root length of L. minor during the first eight weeks of the experiment, while further exposure resulted in a decrease in the effects, indicating the ability of L. minor to tolerate the presence of MPs for a long period of time. MPs adhered rapidly to the plant biomass and the average percentages of strongly and weakly adhered particles were 6.5% and 20.0%, respectively, of the total MPs applied. In summary, results of this study suggest that L. minor can tolerate hotspot concentrations of MPs and can collect MPs from the water surface. Therefore, phytoremediation using floating plants could be considered as a potential method for in situ removal of MPs from the aquatic environment.

Microbial biodegradation of plastics: Challenges, opportunities, and a critical perspective

The abundance of synthetic polymers has increased due to their uncontrolled utilization and disposal in the environment. The recalcitrant nature of plastics leads to accumulation and saturation in the environment, which is a matter of great concern. An exponential rise has been reported in plastic pollution during the corona pandemic because of PPE kits, gloves, and face masks made up of single-use plastics. The physicochemical methods have been employed to degrade synthetic polymers, but these methods have limited efficiency and cause the release of hazardous metabolites or by-products in the environment. Microbial species, isolated from landfills and dumpsites, have utilized plastics as the sole source of carbon, energy, and biomass production. The involvement of microbial strains in plastic degradation is evident as a substantial amount of mineralization has been observed. However, the complete removal of plastic could not be achieved, but it is still effective compared to the preexisting traditional methods. Therefore, microbial species and the enzymes involved in plastic waste degradation could be utilized as eco-friendly alternatives. Thus, microbial biodegradation approaches have a profound scope to cope with the plastic waste problem in a cost-effective and environmental-friendly manner. Further, microbial degradation can be optimized and combined with physicochemical methods to achieve substantial results. This review summarizes the different microbial species, their genes, biochemical pathways, and enzymes involved in plastic biodegradation.

Environmental behaviors and degradation methods of microplastics in different environmental media

Microplastics, as a group of emerging contaminants, are widely present in environmental media and have the potential to endanger the ecological environment and human health. Due to the inconsistencies and difficulties inherent in the analysis of microplastic particles, global monitoring data on the distribution of microplastics in the environment are still far from sufficient. The fate and migration of microplastics in the environment are also uncertain. Therefore, there have been increasing reviews on the distribution, biological effects, migration, and health risks of microplastics. However, reports focusing on the degradation of microplastics are still rare. Understanding and commanding the environmental behavior of microplastics are of great significance to explore the treatment of microplastic pollution. Although some preliminary studies on microplastics have been carried out, there is still an urgent need to conduct a comprehensive study on environmental behaviors and degradation methods of microplastics in different environmental media. This article summarizes the recent advances on microplastics, basically includes the distribution and ecological impact of microplastics in soil and water environments, then elaborates the migration behavior and influencing factors of microplastics, and focuses on the research progress of microplastics degradation methods. On this basis, the problems existing in the current research and the future development directions have been proposed. This review could provide a more systematic reference for the development and research of microplastics in the future.

Current progress on plastic/microplastic degradation: Fact influences and mechanism

Plastic pollution, particularly non-degradable residual plastic films and microplastics (MPs), is a serious environmental problem that continues to worsen each year. Numerous studies have characterized the degradation of plastic fragments; however, there is known a lack of about the state of current physicochemical biodegradation methods used for plastics treatment and their degradation efficiency. Therefore, this review explores the effects of different physicochemical factors on plastics/MPs degradation, including mechanical comminution, ultraviolet radiation, high temperature, and pH value. Further, this review discusses different mechanisms of physicochemical degradation and summarizes the degradation efficiency of these factors under various conditions. Additionally, the important role of enzymes in the biodegradation mechanism of plastics/MPs is also discussed. Collectively, the topics discussed in this review provide a solid basis for future research on plastics/MPs degradation methods and their effects.

Plastisphere community assemblage of aquatic environment: plastic-microbe interaction, role in degradation and characterization technologies

It is undeniable that plastics are ubiquitous and a threat to global ecosystems. Plastic waste is transformed into microplastics (MPs) through physical and chemical disruption processes within the aquatic environment. MPs are detected in almost every environment due to their worldwide transportability through ocean currents or wind, which allows them to reach even the most remote regions of our planet. MPs colonized by biofilm-forming microbial communities are known as the ''plastisphere". The revelation that this unique substrate can aid microbial dispersal has piqued interest in the ground of microbial ecology. MPs have synergetic effects on the development, transportation, persistence, and ecology of microorganisms. This review summarizes the studies of plastisphere in recent years and the microbial community assemblage (viz. autotrophs, heterotrophs, predators, and pathogens). We also discussed plastic-microbe interactions and the potential sources of plastic degrading microorganisms. Finally, it also focuses on current technologies used to characterize those microbial inhabitants and recommendations for further research.

Biodeterioration of Microplastics: A Promising Step towards Plastics Waste Management

Polyethylene and Polyester materials are resistant to degradation and a significant source of microplastics pollution, which is an emerging concern. In the present study, the potential of a dumped site bacterial community was evaluated. After primary screening, it was observed that 68.5% were linear low-density polyethylene, 33.3% were high-density, and 12.9% were Polyester degraders. Five strains were chosen for secondary screening, in which they were monitored by FTIR, SEM and weight loss degradation trials. Major results were observed for Alcaligenes faecalis (MK517568) and Bacillus cereus (MK517567), as they showed the highest degradation activity. Alcaligenes faecalis (MK517568) degrades LLDPE by 3.5%, HDPE by 5.8% and Polyester by 17.3%. Bacillus cereus (MK517567) is better tolerated at 30 °C and degrades Polyester by 29%. Changes in infrared spectra indicated degradation pathways of different strains depending on the types of plastics targeted. Through SEM analysis, groves, piths and holes were observed on the surface. These findings suggest that soil bacteria develop an effective mechanism for degradation of microplastics and beads that enables them to utilize plastics as a source of energy without the need for pre-treatments, which highlights the importance of these soil bacteria for the future of effective plastic waste management in a soil environment.

Enhanced periphyton biodegradation of endocrine disrupting hormones and microplastic: Intrinsic reaction mechanism, influential humic acid and microbial community structure elucidation

Endocrine-disrupting compounds (EDCs), as well as microplastics, have drawn global attention due to their presence in the aquatic ecosystem and persistence in wastewater treatment plants (WWTPs). In the present study, for simultaneous bio-removal of two EDCs, 17α-ethinylestradiol (EE2), bisphenol A (BPA), and a microplastic, polypropylene (PP) four kinds of periphytic biofilms were employed. Additionally, the effect of humic acid (HA) on the removal efficacy of these biofilms was evaluated. It was observed that EE2 and BPA (0.2 mg L^-1 each) were completely (∼100%) removed within 36 days of treatment; and the biodegradation of EE2, BPA, and PP was significantly enhanced in the presence of HA. Biodegradation of EE2 and BPA was evaluated through Ultra-high performance liquid chromatography (UHPLC), and Gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) was used to determine the mechanism of degradation. Gel permeation chromatography (GPC) and SEM had validated the biodegradation of PP (5.2-14.7%). MiSeqsequencing showed that the community structure of natural biofilm changed after the addition of HA, as well as after the addition of EDCs and PP. This change in community structure might be a key factor regarding variable biodegradation percentages. The present study revealed the potential of periphytic biofilms for the simultaneous removal of pollutants of different chemical natures, thus provides a promising new method for wastewater treatment applications.

Recent advances in plastic degradation - From microbial consortia-based methods to data sciences and computational biology driven approaches

The conventional methods of plastic waste management such as mechanical and chemical recycling, landfill complemented by incineration and pyrosis have limited scope. Thus, microbiological-based approaches by the application of microbial consortia or cocultures are appropriate, cost-effective, and eco-friendly to manage plastic wastes. Screening of novel plastic degrading microorganisms, the formulation of microbial consortia, and utilisation of their enzymes probably play a role in plastic waste management. The by-products of microbial degradation of plastic waste can be used as bio-energy sources, that aids in the development of cost-effective bio-digesters. The recent advancements in computational biology and bioinformatics play a vital role in understanding the molecular basis of enzymatic degradation of plastic polymers by microorganisms. Understanding the three-dimensional structures of plastic degrading enzymes and their metabolic pathways play a vital role in studying the microbial degradation of plastics. The present review highlights the scope of various microorganisms and their enzymes in plastic degradation. The review emphasizes the applications of co-cultures or microbial consortia-based approaches for the enhanced degradation of plastic polymers and the production of value-added end products that can be used as the prototypes of bioenergy sources. The review also provides a comprehensive outlook on the applications of data sciences, computational biology, and bioinformatics resources, and web-based tools towards the study of microbial degradation of plastic polymers.

Seeking for a perfect (non-spherical) microplastic particle - The most comprehensive review on microplastic laboratory research

In recent decades, much attention has been paid to microplastic pollution, and research on microplastics has begun to grow exponentially. However, microplastics research still suffers from the lack of standardized protocols and methods for investigation of microplastics under laboratory conditions. Therefore, in this review, we summarize and critically discuss the results of 715 laboratory studies published on microplastics in the last five years to provide recommendations for future laboratory research. Analysis of the data revealed that the majority of microplastic particles used in laboratory studies are manufactured spheres of polystyrene ranging in size from 1 to 50 µm, that half of the studies did not characterize the particles used, and that a minority of studies used aged particles, investigated leaching of chemicals from microplastics, or used natural particles as a control. There is a large discrepancy between microplastics used in laboratory research and those found in the environment, and many laboratory studies suffer from a lack of environmental relevance and provide incomplete information on the microplastics used. We have summarized and discussed these issues and provided recommendations for future laboratory research on microplastics focusing on (i) microplastic selection, (ii) microplastic characterization, and (iii) test design of laboratory research on microplastics.

Integrated microbiology and metabolomics analysis reveal plastic mulch film residue affects soil microorganisms and their metabolic functions

Research on microplastic pollution of terrestrial soils is catching up with the aquatic environment, especially agricultural soil systems. Plastic residues have caused various environmental problems in mulch film extensively used agricultural areas. However, studies focusing specifically on the potential influence of mulch film residues on the metabolic cycle of soil systems have yet to be conducted. Here, high-throughput sequencing combined with metabolomics were first used to study the effects of residual mulch on soil microbial communities and related metabolic functions. Plastic film treatment did not significantly affect soil physicochemical properties including pH, organic matter and nitrogen, etc in short term. However, it did significantly changed overall community structure of soil bacteria, and interfered with complexity of soil bacterial symbiosis networks; exposure time and concentration of residues were particularly important factors affecting community structure. Furthermore, metabolomics analysis showed that film residue significantly changed soil metabolite spectrum, and interfered with basic carbon and lipid metabolism, and also affected basic cellular processes such as membrane transport and, in particular, interfered with the biosynthesis of secondary metabolites, as well as, biodegradation and metabolism of xenobiotics. Additionally, through linear discriminant and collinear analysis, some new potential microplastic degrading bacteria including Nitrospira, Nocardioidaceae and Pseudonocardiaceae have been excavated.

On the degradation of (micro)plastics: Degradation methods, influencing factors, environmental impacts

Plastics and microplastics are difficult to degrade in the natural environment due to their hydrophobicity, the presence of stable covalent bonds and functional groups that are not susceptible to attack. In nature, microplastics are more likely to attract other substances due to their large specific surface area, which further prevents degradation from occurring. Some of these substances are toxic and harmful, and can be spread to various organisms through the food chain along with the microplastics to cause harm to them. Degradation is an effective way to eliminate plastic pollution, and a comprehensive understanding of the methods and mechanisms of plastic degradation is necessary, because it is the result of synergistic effects of several degradation methods, both in nature and in consideration of future engineering applications. The authors firstly summarize the degradation methods of (micro)plastics; secondly, review the influence of intrinsic properties and environmental factors during the degradation process; finally, discuss the environmental impact of the degradation products of (micro)plastics. It is evident that the degradation of (micro)plastics still has many challenges to overcome, and there are no mature and effective methods that can be applied in engineering practice or widely used in nature. Therefore, there is an urgent need for research on the degradation of (micro)plastics.

Photocatalytic and biological technologies for elimination of microplastics in water: Current status

Water pollution by microplastics (MPs) has emerged as a significant environmental and public health concern. Several conventional technologies in drinking water and wastewater treatment facilities are capable of capturing a substantial portion of microplastics from surface water; however, only limited methods are available for actual destruction of microplastics. Rate of success is highly variable, and actual mechanisms which result in MP destruction are only partly known. Photocatalysis and microbial degradation technologies show promise at laboratory scale for the transformation of microplastics to water-soluble hydrocarbons, carbon dioxide and, in limited cases, useful fuels. Both photocatalytic and microbial technologies offer the potential for long-term water security and ecological stability and deserve further attention by scientists. Additional research is necessary, however, in identifying more effective semiconductors for photocatalysis, and optimal effective microbial consortia and environmental conditions to optimize microplastic biodegradation. Many more polymer types beyond polyethylene must be studied for degradation, and laboratory-scale research must be expanded to field-scale. This paper provides a comprehensive overview of processes and mechanisms for removing MPs by photocatalysis and microbial technologies. It provides useful data for research dedicated to improved removal of MPs from surface waters.

Microplastic Pollution: An Emerging Threat to Terrestrial Plants and Insights into Its Remediation Strategies

Microplastics (MPs) are ubiquitous and constitute a global hazard to the environment because of their robustness, resilience, and long-term presence in the ecosystem. For now, the majority of research has primarily focused on marine and freshwater ecosystems, with just a small amount of attention towards the terrestrial ecosystems. Although terrestrial ecosystems are recognized as the origins and routes for MPs to reach the sea, there is a paucity of knowledge about these ecological compartments, which is necessary for conducting effective ecological risk assessments. Moreover, because of their high persistence and widespread usage in agriculture, agribusiness, and allied sectors, the presence of MPs in arable soils is undoubtedly an undeniable and severe concern. Consequently, in the recent decade, the potential risk of MPs in food production, as well as their impact on plant growth and development, has received a great deal of interest. Thus, a thorough understanding of the fate and risks MPs, as well as prospective removal procedures for safe and viable agricultural operations in real-world circumstances, are urgently needed. Therefore, the current review is proposed to highlight the potential sources and interactions of MPs with agroecosystems and plants, along with their remediation strategies.

Informal landfill contributes to the pollution of microplastics in the surrounding environment

A large amount of plastic waste is generated yearly worldwide, and landfills are commonly used for the disposal of plastic waste. However, burying in landfill does not get rid of the plastic waste but leave the problem to the future. Previous works have showed that microplastics are presented in the landfill refuse and leachate, which might be potential sources of microplastics. In this work, characteristics of microplastic pollution in an informal landfill in South China were studied. Landfill refuse, underlying soil, leachate, and groundwater samples were collected from different sites within and around the landfill. Results show that microplastics in the landfill refuse and underlying soil varied from 590 to 103,080 items/kg and from 570 to 14,200 items/kg, respectively. Most of the microplastics are fibrous, small sized, and transparent. Polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) are major polymer types. Scanning electron microscope (SEM) images and Fourier Transform Infrared (FTIR) spectra of the microplastic samples indicate varying degree of weathering. Microplastic abundances in the landfill leachate and groundwater ranged from 3 to 25 items/L and from 11 to 17 items/L, respectively. Microplastics detected in the landfill leachate and groundwater are even smaller compared with those in the refuse and underlying soil and their polymer types are more diverse. This work demonstrated that microplastics presented in an informal landfill without sufficient protection can leak out to the surrounding environment. The microplastic pollution originated from informal landfills should receive more attentions.

A critical review on microbial degradation of petroleum-based plastics: quantitatively effects of chemical addition in cultivation media on biodegradation efficiency

Petroleum-based plastics (PBP) with different properties have been developed to suit various needs of modern lives. Nevertheless, these well-developed properties also present the double-edged sword effect that significantly threatens the sustainability of the environment. This work focuses on the impact of microbial cultivating conditions (the elementary compositions and temperature) to provide insightful information for the process optimization of microbial degradation. The major elementary compositions in cultivation media and temperature from the literature were radically reviewed and assessed using the constructed supervised machine learning algorithm. Fifty-two literatures were collected as a training dataset to investigate the impact of major chemical elements and cultivation temperature upon PBP biodegradation. Among six singular parameters (NH₄⁺, K⁺, PO₄^3-, Mg²⁺, Ca²⁺, and temperature) and thirty corresponding binary parameters, four singular (NH₄⁺, K⁺, PO₄^3-, and Mg²⁺) and six binary parameters (NH₄⁺/K⁺, NH₄⁺/PO₄^3-, NH₄⁺/Ca²⁺, K⁺/PO₄^3-, PO₄^3-/Mg²⁺, Mg²⁺/Temp) were identified as statistically significant towards microbial degradation through analysis of variance (ANOVA). The binary effect (PO₄^3-/Mg²⁺) is found to be the most statistically significant towards the microbial degradation of PBP. The concentration range, which locates at 0.1-0.6 g/L for Mg²⁺ and 0-2.8 g/L for PO₄^3-, was identified to contribute to the maximum PBP biodegradation. Among all the investigated elements, Mg²⁺ is the only element that is statistically and significantly associated with the variations of cultivation temperature. The optimal preparation conditions within ± 20% uncertainties based upon the range of collected literature reports are recommended. Five representative cultivation elementary compositions (NH₄⁺, K⁺, PO₄^3-, Mg²⁺, and Ca²⁺) and temperature were reviewed from fifty two different literature reports to investigate their impacts on the microbial degradation of PBP using supervised machine learning algorithm. The optimal cultivation conditions based upon collected literature reports to achieve biodegradation over 80% were identified.

Rapid colonization and biodegradation of untreated commercial polyethylene wrap by a new strain of Bacillus velezensis C5

Biodegradation could be a potential alternative solution to polyethylene (PE) pollution. However, its hydrophobic surface and long carbon chains make extremely low biodegradation efficiency. In this study, we screened a novel potential bacterial strain C5 (CGMCC number: 1.18715) for low-density polyethylene (LDPE) biodegrading from landfills. The strain was identified as Bacillus velezensis according to its 16S rRNA sequence. The contact angle analysis indicated that C5 could rapidly form biofilm on untreated LDPE which resulted in contact angles decreasing from 100° to 54° over 7 d. After the LDPE film incubated with C5 for 90 d, the thickness and weight of LDPE film decreased by 26% and 8.01%, respectively. Besides, the biotreated PE film was found with increases in weight-averaged molecular weight by 29.8%, suggesting low molar mass chains were consumed. C₂₄-C₂₉ n-alkanes were detected in the biodegradation products, which proved the depolymerization of LDPE. Combined with the genome mining results, a possible biofilm-aided degrading mechanism was proposed and might involve key enzymes, such as laccase, cytochrome P450 and propionyl-CoA carboxylase, which could constitute a multienzyme system for the co-catalytic degradation of LDPE waste.

A review on marine plastisphere: biodiversity, formation, and role in degradation

The pollution of plastic waste has become an increasingly serious environmental crisis. Recently, plastic has been detected in various kinds of environments, even in human tissues, which is an increasing threat to the ecosystems and humans. In the ocean, the plastic waste is eventually fragmentized into microplastics (MPs) under the disruption of physical and chemical processes. MPs are colonized by microbial communities such as fungi, diatoms, and bacteria, which form biofilms on the surface of the plastic called “plastisphere”. In this review, we summarize the studies related to microorganisms in the plastisphere in recent years and describe the microbial species in the plastisphere, mainly including bacteria, fungi, and autotrophs. Secondly, we explore the interactions between MPs and the plastisphere. The depth of MPs in the ocean and the nutrients in the surrounding seawater can have a great impact on the community structure of microorganisms in the plastisphere. Finally, we discuss the types of MP-degrading bacteria in the ocean, and use the “seed bank” theory to speculate on the potential sources of MP-degrading microorganisms. Challenges and future research prospects are also discussed.

Challenges and opportunities in bioremediation of micro-nano plastics: A review

Rising level of micro-nano plastics (MNPs) in the natural ecosystem adversely impact the health of the environment and living organisms globally. MNPs enter in to the agro-ecosystem, flora and fauna, and human body via trophic transfer, ingestion and inhalation, resulting impediment in blood vessel, infertility, and abnormal behaviors. Therefore, it becomes indispensable to apply a novel approach to remediate MNPs from natural environment. Amongst the several prevailing technologies of MNPs remediation, microbial remediation is considered as greener technology. Microbial degradation of plastics is typically influenced by several biotic as well as abiotic factors, such as enzymatic mechanisms, substrates and co-substrates concentration, temperature, pH, oxidative stress, etc. Therefore, it is pivotal to recognize the key pathways adopted by microbes to utilize plastic fragments as a sole carbon source for the growth and development. In this context, this review critically discussed the role of various microbes and their enzymatic mechanisms involved in biodegradation of MNPs in wastewater (WW) stream, municipal sludge, municipal solid waste (MSW), and composting starting with biological and toxicological impacts of MNPs. Moreover, this review comprehensively discussed the deployment of various MNPs remediation technologies, such as enzymatic, advanced molecular, and bio-membrane technologies in fostering the bioremediation of MNPs from various environmental compartments along with their pros and cons and prospects for future research.

Microbial Degradation of Plastics and Approaches to Make it More Efficient

Abstract—

The growing worldwide production of synthetic plastics leads to increased amounts of plastic pollution. Even though microbial degradation of plastics is known to be a very slow process, this capacity has been found in many bacteria, including invertebrate symbionts, and microscopic fungi. Research in this field has been mostly focused on microbial degradation of polyethylene, polystyrene, and polyethylene terephthalate (PET). Quite an arsenal of different methods is available today for detecting processes of plastic degradation and measuring their rates. Given the lack of generally accepted protocols, it is difficult to compare results presented by different authors. PET degradation by recombinant hydrolases from thermophilic actinobacteria happens to be the most efficient among the currently known plastic degradation processes. Various approaches to accelerating microbial plastic degradation are also discussed.

Recent advances on ecological effects of microplastics on soil environment

The mass production and wide application of plastics and their derivatives have led to the release of a large number of discarded plastic products into the natural environment, where they continue to accumulate due to their low recycling rate and long durability. These large pieces of plastic will gradually break into microplastics (<5 mm), which are highly persistent organic pollutants and attract worldwide attention due to their small particle size and potential threats to the ecosystem. Compared with the aquatic system, terrestrial systems such as soils, as sinks for microplastics, are more susceptible to plastic pollution. In this article, we comprehensively summarized the occurrence and sources of microplastics in terrestrial soil, and reviewed the eco-toxicological effects of microplastics in soil ecosystems, in terms of physical and chemical properties of soil, soil nutrient cycling, soil flora and fauna. The influence of microplastics on soil microbial community, and particularly the microbial community on the surface of microplastics, were examined in detail. The compound effects of microplastics and other pollutants, e.g., heavy metals and antibiotics, were addressed. Future challenges of research on microplastics include development of new techniques and standardization for the extraction and qualitative and quantitative analysis of microplastics in soils, toxic effects of microplastics at microbial or even molecular levels, the contribution of microplastics to antibiotic resistance genes migration, and unraveling microorganisms for the degradation of microplastics. This work provides as a better understanding of the occurrence, distribution and potential ecological risks of microplastics in terrestrial soil ecosystems.

Insight into the Interaction Between Microplastics and Microorganisms Based on a Bibliometric and Visualized Analysis

Microplastics are abundant in the environment and have been proven to affect ecosystems and human health. Microorganisms play essential roles in the ecological fate of microplastics pollution, potentially yielding positive and negative effects. This study reviews the research progress of interaction between microplastics and microorganisms based on a bibliometric and visualized analysis. Publication numbers, subjects, countries, institutions, highly cited papers, and keywords were investigated by statistical analysis. VOSviewer software was applied to visualize the co-occurrence and aggregation of national collaboration, subjects, and keywords. Results revealed trends of rapidly increasing publication output that involved multiple disciplines. Contributing countries and their institutions were also identified in this study. Keywords, co-occurrence network visualization, highly cited papers analysis, and knowledge-based mining were all used to give insight into microorganisms or microbiota related to microplastics pollution, and the potential impacts that microplastics biodegradation may cause. In the future, research efforts need to focus on the following areas: microbial degradation processes and mechanisms, assessment of ecological microplastics risks, and potential effects of microplastics bioaccumulation and human exposure. This study provides a holistic view of ongoing microplastics and related microbial research, which may be useful for future microplastics biodegradation studies.

Microplastic degradation methods and corresponding degradation mechanism: Research status and future perspectives

Microplastics (MPs) pollution has become a global environmental concern because of their severe threat to biota. However, limited studies on the elimination of MPs pollution were reported. The conventional treatment methods were not suitable for MPs owing to their smaller size than plastic items. Hence many methods for MPs treatment have been examined. This review summarized the recently reported MPs degradation methods including AOPs (direct photodegradation, photocatalytic oxidation, and electrochemical oxidation) and biodegradation, corresponding degradation mechanism as well as current development state. The characteristics and limitations of each technique were discussed in detail. We found that all of them achieved almost satisfying degradation performance of MPs, but most of them exhibited that MPs can only be degraded partially into useful products or even CO₂ and H₂O under lab conditions. Given these, some recommendations for future research directions were proposed based on the knowledge gaps in these reported literatures. The aim of this review is to give a comprehensive introduction of several MPs degradation methods and acquaint the readers with the current research status of MPs degradation.

Microplastic pollution in aquatic environments with special emphasis on riverine systems: Current understanding and way forward

Microplastics (MPs) are emerging as a severe threat in our environment. Their diverse existence in marine environments is being researched globally and thus a widely known fact; however, their presence in the freshwater counterpart has gained attention lately only. Riverine systems, the most critical freshwater resources serve as an essential link between terrestrial and marine environments and their contamination with MPs is going to create severe environmental issues. Because of their small size and unique morphology, these polymers can exhibit variable toxicity to the interacting biota and alter their habitat properties; thus, causing serious impacts on the environment and health of living beings, including humans. These microplastics can also interact with pollutants like heavy metals and organic pollutants, which further augment their harming potential. Inefficient and poor plastic waste disposal practices play an important role in the generation of microplastic pollutants. In the present COVID 19 pandemics, the excessive use of plastic to contain the spread of infection has further added the plastic load in the environment which will eventually lead to the generation of microplastic particles. Also, a significant amount of microplastic pollutants in riverine systems are delivered through wastewater treatment plant effluents. These trade-offs create a distress situation in the environment. The present study connects these key issues for a better understanding of the diverse existence of microplastic pollutants, their sources, and fate, with a special emphasis on riverine systems. A critical appraisal of the knowledge gaps and proposal of suitable solutions through this review might open up avenues for further research and effective management of the microplastics in aquatic environments.

Low-Density Polyethylene Film Biodegradation Potential by Fungal Species from Thailand

Accumulated plastic waste in the environment is a serious problem that poses an ecological threat. Plastic waste has been reduced by initiating and applying different alternative methods from several perspectives, including fungal treatment. Biodegradation of 30 fungi from Thailand were screened in mineral salt medium agar containing low-density polyethylene (LDPE) films. Diaporthe italiana, Thyrostroma jaczewskii, Collectotrichum fructicola, and Stagonosporopsis citrulli were found to grow significantly by culturing with LDPE film as the only sole carbon source compared to those obtained from Aspergillus niger. These fungi were further cultured in mineral salt medium broth containing LDPE film as the sole carbon source for 90 days. The biodegradation ability of these fungi was evaluated from the amount of CO₂ and enzyme production. Different amounts of CO₂ were released from D. italiana, T. jaczewskii, C. fructicola, S. citrulli, and A. niger culturing with LDPE film, ranging from 0.45 to 1.45, 0.36 to 1.22, 0.45 to 1.45, 0.33 to 1.26, and 0.37 to 1.27 g/L, respectively. These fungi were able to secrete a large amount of laccase enzyme compared to manganese peroxidase, and lignin peroxidase enzymes detected under the same conditions. The degradation of LDPE films by culturing with these fungi was further determined. LDPE films cultured with D. italiana, T. jaczewskii, C. fructicola, S. citrulli, and A. niger showed weight loss of 43.90%, 46.34%, 48.78%, 45.12%, and 28.78%, respectively. The tensile strength of LDPE films cultured with D. italiana, T. jaczewskii, C. fructicola, S. citrulli, and A. niger also reduced significantly by 1.56, 1.78, 0.43, 1.86, and 3.34 MPa, respectively. The results from Fourier transform infrared spectroscopy (FTIR) reveal an increasing carbonyl index in LDPE films culturing with these fungi, especially C. fructicola. Analysis of LDPE films using scanning electron microscopy (SEM) confirmed the biodegradation by the presence of morphological changes such as cracks, scions, and holes on the surface of the film. The volatile organic compounds (VOCs) emitted from LDPE films cultured with these fungi were analyzed by gas chromatography-mass spectrometry (GC-MS). VOCs such as 1,3-dimethoxy-benzene, 1,3-dimethoxy-5-(1-methylethyl)-benzene, and 1,1-dimethoxy-decane were detected among these fungi. Overall, these fungi have the ability to break down and consume the LDPE film. The fungus C. fructicola is a promising resource for the biodegradation of LDPE which may be further applied in plastic degradation systems based on fungi.

Functional interplay between plastic polymers and microbes: a comprehensive review

Escalated production of plastic, their worldwide distribution and persistent nature finally results into their environmental accumulation causing severe threats to the ecological environment and biotic health. Thus, development of suitable measurements for environmental remediation of plastic may be an urgent issue in this plastic age. Some recent reviews have categorized the microbial species able to degrade different plastic polymers and the different factors effecting bio-degradation of plastic are poorly understood. This review comprehensively discusses bio-degradation of traditional and biodegradable plastic polymers both in natural and biological environment (gut microbes and fungi) to understand different factors regulating their degradation, and also shows how degradation of plastic polymers under abiotic factors influence subsequent biological degradation. Different physicochemical modifications like - breaking large polymers into small fragments by pre-treatment, functional groups enrichment, identifying potent microbial species (consortia) and engineering microbial enzymes might be crucial for bio-degradations of plastic. Effects of micro/nanoplastic and other chemical intermediates, formed during the bio-degradation of plastic, on species composition, abundance, growth, metabolism and enzymatic systems of microbes involved in the bio-degradation of plastic should be determined in future research.