Heavy metals in agricultural soils from a typical township in Guangdong Province, China: Occurrences and spatial distribution

Exposure to copper sulfate impairs survival, post-embryonic midgut development and reproduction in Aedes aegypti

Aedes aegypti is a vector of several global human viruses responsible for high human morbidity and mortality. The method to prevent the transmission of vector-borne viruses is mainly based on the control of the insect vector using insecticides. Among these chemicals, copper sulfate is a compound widely used in agriculture with the potential to be used as an alternative to control these insects. This study evaluated the effects of the exposure of A. aegypti larvae to copper sulfate on survival, midgut morphology, blood-feeding and fecundity. The exposure to CuSO₄ decreased the survival of A. aegypti during the immature phase. Adults obtained from exposed larvae had their lifespan decreased at all tested concentrations. The exposure to CuSO₄ impaired the development in the transition from larvae to pupae and from pupae to adult. The number of eggs laid by females developed from larvae treated with CuSO₄ was significantly lower than in control. In addition, the egg hatching rates were also negatively affected. The midguts of treated larvae and pupae showed epithelial disorganization. The number of cleaved caspase-3 cells increased in the midgut of exposed pupae compared to control. Moreover, there was a reduction in proliferating cells in treated larvae and pupae compared to the control. In conclusion, the results reveal that CuSO₄ exposure has insecticidal activity against A. aegypti, which may be related to the impairment of the midgut metamorphosis and reduced proliferation of stem cells, with the consequent impairment of female mosquito fertility and fecundity.

Impact of copper sulfate on survival, behavior, midgut morphology, and antioxidant activity of Partamona helleri (Apidae: Meliponini)

Copper sulfate (CuSO₄) is widely used in agriculture as a pesticide and foliar fertilizer. However, the possible environmental risks associated with CuSO₄ use, particularly related to pollinating insects, have been poorly studied. In this study, we evaluated both lethal and sublethal effects of CuSO₄ on the stingless bee Partamona helleri. Foragers were orally exposed to five concentrations of CuSO₄ (5000, 1666.7, 554.2, 183.4, 58.4 μg mL^-1), and the concentration killing 50% (LC₅₀) was estimated. This concentration (142.95 μg mL^-1) was subsequently used in behavioral, midgut morphology, and antioxidant activity analyses. Bee mortality increased with the ingestion of increasing concentrations of CuSO₄. Ingestion at the estimated LC₅₀ resulted in altered walking behavior and damage to the midgut epithelium and peritrophic matrix of bees. Furthermore, the LC₅₀ increased the catalase or superoxide dismutase activities and levels of the lipid peroxidation biomarker malondialdehyde. Furthermore, the in situ detection of caspase-3 and LC3, proteins related to apoptosis and autophagy, respectively, revealed that these processes are intensified in the midgut of treated bees. These data show that the ingestion of CuSO₄ can have considerable sublethal effects on the walking behavior and midgut of stingless bees, and therefore could pose potential risks to pollinators including native bees. Graphical abstract.

Evaluation of ecological risk, source, and spatial distribution of some heavy metals in marine sediments in the Middle and Eastern Black Sea region, Turkey

In the present study, the concentration levels of heavy metals such as Mn, Fe, Ni, Cu, Zn, Cr, and Pb in sediment samples collected from 16 sampling locations in the Middle and Eastern Black Sea regions, Turkey, were measured using energy dispersive X-ray fluorescence spectroscopy (EDXRF). Various pollution parameters and methods, such as the enrichment factor (EF), geo-accumulation index (I_geo), contamination factor (CF), pollution load index (PLI), ecological risk index (RI), and geo-spatial distribution patterns, were used to assess the pollution status, ecological risks, and sources of metals in sediment in detail. The mean concentrations of Mn, Fe, Ni, Cu, Zn, Cr, and Pb were found to be 565.38, 46,000, 34.38, 104.06, 109.88, 87.31, and 32.31 mg/kg, respectively. Results showed that the mean concentrations of Cu, Zn, and Pb exceeded the crustal shale value, with the exception of Mn, Fe, Ni, and Cr. According to the calculated pollution parameters, although minimal or moderate pollution was detected in the area investigated, it was determined that there was a very low ecological risk. Multivariate statistical analysis results showed that Cu, Zn, and Pb levels in the investigated region were slightly influenced by anthropogenic inputs such as mining and agricultural practices. In addition, the geo-spatial distributions of Cu, Zn, Fe, and Pb were found to be higher in this region due to the mining activities carried out in the Eastern Black Sea region.

Multi-level methods to quantify risk assessment, source apportionment and identifying key risk areas of soil toxic elements in Ashi River watershed, China

With the advancement of small watershed governance in agricultural production process, soil toxic element pollution issue in watersheds constitutes a recent research hot spot. The Ashi River watershed is an agriculture-dominated small watershed which is exposed to toxic element sources, posing high risk of toxic element pollution to the planting areas. In this study, collection of soil samples was carried out along the periphery of the river network, and the soil physicochemical parameters and toxic elements (As, Cd, Cr, Cu, Pb, and Zn) were analyzed. The results showed that: (1) The geo-accumulation index (I_geo) and potential ecological risk index were used to evaluate the pollution degree, and the contents of As, Cd, and Zn in some sampling sites exceeded risk screening values. Moreover, soils closer to mining sources were found to be more polluted; (2) Redundancy analysis confirmed the contribution rate relationship between environmental factors and toxic elements. C/N ratio, total carbon (C), and total potassium (K) exhibited significant relationships with toxic elements (P < 0.01 or P < 0.05), respectively. Moreover, geographic locations (longitude, latitude, and elevation) showed significant impacts on toxic element contents (except for Cu); (3) The apportionment of toxic element pollution sources by using principal component analysis showed that Pb, Zn, Cu, and Cd were mainly related to mining activities, while As was closely related to insecticide and herbicide, and Cr was mainly related to soil parent material and electroplating factory; (4) Through the integrated resistance base surface and toxic element sources combined with minimum cumulative resistance model, the toxic element risk areas were identified. The middle reaches corresponded to the extremely high risk zone, which undeniably requires the strengthening of the environmental management.

Spatial distribution and human health risk assessment of soil heavy metals based on sequential Gaussian simulation and positive matrix factorization model: A case study in irrigation area of the Yellow River

The content of Cd, Cu, Pb, Zn, Cr, Ni and As from 250 soil samples was measured in agricultural soil of Ningxia section of the Yellow River. Positive matrix factorization (PMF) was to identify the main sources of these heavy metals; Sequential Gaussian Simulation (SGS) was to identify their spatial distribution and high-risk areas; and Human Health risk (HHR) model was to measure the health risk. Results showed that the average content of Cd and As exceeds the risk screening value of "Soil Environmental Quality-Agricultural Land Soil Pollution Risk Control Standard" (GB 15618-2018), which belongs to slight-level pollution. Although the content of other types of HMs (Cu, Pb, Zn, Cr, Ni) is below the risk screening value, they are still included heavily in the soil (except Cr). PMF indicated that mixed sources of agriculture and industry accounted for 27.06%, natural sources accounted for 14.12%, industrial sources accounted for 23.04%, traffic sources accounted for 21.50%, and Yellow River sedimentary sources accounted for 14.28%. PMF-HHR showed that the mixed sources of agriculture and industry are the most important factor causing non-carcinogenic risk (HI) to children (accounting for 55.75%). Industrial sources and traffic sources were the two main factors that cause HI to adults (industrial sources accounted for 25.16%, and traffic sources accounted for 28.78%). Mixed sources of agriculture and industry and natural sources were the two main factors that cause carcinogenic risk (CR) (mixed sources of agriculture and industry account for 35.34%, and natural sources account for 33.23%). SGS indicated that 0.64% and 9.32% of the total areas were posing as higher HI areas to children and adults respectively; in particular, 0.68% and 1.12% of the areas were identified as higher HI of As and Cr areas at a critical probability of 0.9.

Assessment of the pollution levels of potential toxic elements in urban vegetable gardens in southwest China

Vegetable gardens are increasingly common in urban areas and can provide numerous societal benefits; however, contamination with potential toxic elements (PTEs) due to urbanization and industrialization is cause for concern. The present study aimed to assess the source of contamination and pollution levels in urban garden soils, as well as the health risks for adults and children consuming vegetables grown in such environments. Various types of vegetable samples and their corresponding soils from 26 community gardens were collected throughout Chengdu City in southwestern China. The results showed that leafy vegetables, particularly lettuce leaves and Chinese cabbage, had relatively higher levels of Cd (0.04 mg/kg FW) and Pb (0.05 mg/kg FW), while higher levels of As (0.07 mg/kg FW), Cr (0.07 mg/kg FW), and Hg (0.003 mg/kg FW) were found in amaranths, tomatoes, and Houttuynia cordatas, respectively. The pollution indices revealed that the vegetable purplish soils were relatively more polluted by Cd and As, and the concentrations of these metals in vegetables were correlated with their concentrations in the soils. Principal component analysis grouped the PTEs in two dimensions that cumulatively explained 62.3% of their variation, and hierarchical clustering identified two distinct clusters indicating that Cr originated from a unique source. The health risk assessment revealed that exposure to As and Cd induced the greatest non-carcinogenic risk, whereas Cr was most likely to cause cancer risks. Furthermore, contaminated vegetable consumption was riskier for children than adults. The critical factors contributing to PTE contamination in vegetable gardens were determined to be vegetable species, total soil element content, soil pH, and soil organic matter content. Overall, Cr and As pollution present the greatest concern, and community health care services must enact more effective regulatory and preventative measures for urban gardens in terms of PTEs.

Assessment of trace element pollution in northern and western Iranian agricultural soils: a review

The pollution of Iranian agricultural soils with trace elements (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) was assessed and compared with other agricultural soils around the world. Experimental data on trace element content in Iranian agricultural areas in the west and north were collected from the literature: 39 studies covered a total of 46 agricultural sites of 17 provinces in Iran, in order to characterize their patterns of accumulation of trace elements. Two pollution indices, namely, the pollution index (PI) and the integrated pollution index (IPI), were used to evaluate trace element accumulation. The data revealed a remarkable variation in trace element content among soils in different areas. Exploratory data analyses (EDAs) showed that a number of trace elements (Pb, Cu, and Zn) are asymmetrically distributed and scattered. Surveys indicated that 45.5% of the studied samples had elevated PI values for Cd, 13.0% for Cu, and 16.7% for Pb, clearly indicating an anthropogenic contribution of these three elements. The IPI of the agricultural soils also indicated that most areas are classified as having moderate and high pollution. Higher contents of trace elements (except for Mn) were found in some cities of the Isfahan, Hamadan, and Tehran provinces. Excessive application of conventional and organic fertilizers, pesticides, animal manure, and sewage sludge for enhancing crop production is responsible for high trace element content in Iran's agricultural soils. This in turn, through the food chain, is a threat to human health. Analysis of the correlation between trace elements exhibited that Cu, Pb, and Zn (Cd, Pb and Zn) were very closely associated with each other, showing that their prevalent sources are common and the efforts to regulate them linked in common actions. We consider this evaluation as a viable approach to other similar areas in the Middle East and beyond, which could be used by environmental scientists for risk assessment and decision making.

A comprehensive exploration on pollution characteristics and health risks of potentially toxic elements in indoor dust from a large Cu smelting area, Central China

Large-scale smelting activities release large amounts of potentially toxic elements (PTEs) in fine particles. These particles floating in the air eventually settle on leaves, roads, and even indoors. In smelting areas, indoor environments are generally considered relatively safe. However, these areas are not taken seriously and need to be assessed. This paper systematically studied pollution characteristics, main sources and health risks of ten potentially toxic elements, PTEs (Mn, Ni, Cu, Zn, Hg, Cd, As, Cr, Pb, and Tl), of dust samples from different indoor environments in smelting areas using various methods. Therefore, this study analyzed dust samples from 35 indoor environments. The enrichment factors showed that the indoor dust samples were extremely enriched by Cd and Cu and significantly enriched by Hg, Pb, As, and Zn. The result of the spatial distribution showed that the high-value PTEs were mainly distributed near the Cu smeltery. Three sources were quantitatively assigned for these PTEs, and they were industrial smelting and traffic activities (44.40%), coal-fired activities (18.11%), and natural existence (37.49%). Based on the calculation of health risk, the value of THI for children was 7.57, indicating a significant non-carcinogenic risk. For carcinogenic risk, the values of TCR for children and adults were 2.91×10^-2 and 2.97×10^-3, respectively, which were much higher than the acceptable risk value 1×10^-4. Combining health risk assessment with source discrimination, we found that the industrial discharges and traffic activities were the most main source of non-cancer and cancer risks. Therefore, smelting activities should be more strictly monitored, and traffic emission management should be strengthened.

Application of stochastic model to assessment of heavy metal(loid)s source apportionment and bio-availability in rice fields of karst area

Mining activities and high geological background are considered the important factors causing heavy metal(loid)s accumulation in rice fields of karst area. In this study, the contents, main sources, and the factors influencing bio-availability of heavy metal(loid)s were determined using conditional inference tree (CIT), random forest (RF), and geostatistical analyses with 105 soil samples collected from rice fields in karst area. Contamination by Cd, Hg, As, and Pb in soil was relatively serious in the study area in which the compound pollution was highly similar to that in the flooded area. CIT and RF effectively identified the contributions of natural and anthropogenic inputs of soil heavy metal(loid)s. Concentrations of Pb, As, and Hg were closely associated with human inputs whose cumulative contribution rates reached 68%, 87%, and 86%, respectively. Industrial activities (28%) and geogenic characteristics (44%) were primary sources of Cd accumulation. The soil pH, soil organic matter (SOM), distance from city center, the contents of heavy metal(loid)s in soil, and industry type were the most important factors influencing bio-availability of heavy metal(loid)s. Combined effect of multiple metals could not be ignored, in which As and Cd contributed over 80% to total non-carcinogenic risks for adults and children.

Ecological risk assessment of heavy metals in farmland soils in Beijing by three improved risk assessment methods

Beijing, as the capital of China, still has soil pollution problems that cannot be ignored. However, there are few studies on the overall ecological risks of heavy metals in farmland soils in Beijing. This study selected 432 soils and crops heavy metal content data of eight districts in Beijing from academic papers and academic journal papers. In this study, the improved Hakanson method, improved analytic hierarchy process (AHP), and integrated quality impact index (IICQ) comprehensively were used to evaluate the impact of Pb, As, and Cd pollution on the farmland soil environment, and the applicable conditions of these methods were discussed. The results by improved Hakanson method showed that both Pb and As were at the normal ecological risk level, while Cd was the largest contributor to potential ecological risk which accounted for 72.54% of the total risk and is mainly at a moderate ecological risk level. The analysis by improved AHP showed that the average comprehensive index of soil heavy metal pollution in the study area was 0.2317, which was at a light pollution level. The IICQ of soil and agricultural products were between 0 and 1 demonstrating that the soil was clean. In summary, the pollution of heavy metals Pb, As, and Cd in the study area is at a relatively low level, and there is no significant risk to the surrounding environment and human health. IICQ method is suitable for the evaluation of soil heavy metal composition and individual impact and can be more accurately used for the overall ecological evaluation of soil-crop-human health system.

Research trends and frontiers on source appointment of soil heavy metal: a scientometric review (2000-2020)

In recent years, source appointment of soil heavy metal has attracted growing attention. However, few studies have attempted to make a comprehensive and systematical review on this topic. For this reason, a total of 1051 publications were retrieved from the Web of Science (WOS) database between 2000 and 2020. A scientometric analysis was carried out to reveal the characteristics of publications, research power, and research hotspots. CiteSpace was used to visualize and summarize the information about the development in this field. The results showed that (1) the number of publications in source appointment of soil heavy metal had increased rapidly; Environmental science and ecology and environmental sciences were top 2 most popular subject categories; (2) Research power was mainly distributed in Asia, Europe, and North America. China and Chinese Academy of Sciences were the most productive country and institution in terms of publications in this field. Biao Huang (China) was the most productive author. However, Hakanson L (Sweden) was the most influential author in terms of citation frequency; (3) Heavy metal, source identification, and contamination were the most frequent keywords. Keyword clustering analysis showed that the research hotspots mainly concentrated on air pollution, bioremediation, spatial distribution, soil, PCA, and so on; (4) Keyword bursts analysis showed that the research frontiers mainly focused on spatial analysis of soil heavy metal and exposure risk to human health.

An Integrated Approach for Source Apportionment and Health Risk Assessment of Heavy Metals in Subtropical Agricultural Soils, Eastern China

Unreasonable human activities may cause the accumulation of heavy metals (HMs) in the agricultural soil, which will ultimately threaten the quality of soil environment, the safety of agricultural products, and human health. Therefore, the accumulation characteristics, potential sources, and health risks of HMs in agricultural soils in China’s subtropical regions were investigated. The mean Hg, Cu, Zn, Pb, and Cd concentrations of agricultural soil in Jinhua City have exceeded the corresponding background values of Zhejiang Province, while the mean concentrations of determined 8 HMs were less than their corresponding risk-screening values for soil contamination of agricultural land in China. The spatial distribution of As, Cr, Ni, Cu, and Pb were generally distributed in large patches, and Hg, Zn, and Cd were generally sporadically distributed. A positive definite matrix factor analysis (PMF) model had better performance than an absolute principal component–multiple linear regression (APCS-MLR) model in the identification of major sources of soil HMs, as it revealed higher R2 value (0.81–0.99) and lower prediction error (−0.93–0.25%). The noncarcinogenic risks (HI) of the 8 HMs to adults and children were within the acceptable range, while the carcinogenic risk (RI) of children has exceeded the safety threshold, which needs to be addressed by relevant departments. The PMF based human health risk assessment model indicated that industrial sources contributed the highest risk to HI (32.92% and 30.47%) and RI (60.74% and 61.5%) for adults and children, followed by agricultural sources (21.34%, 29.31% and 32.94% 33.19%). Therefore, integrated environmental management should be implemented to control and reduce the accumulation of soil HMs from agricultural and industrial sources.

Source-specific ecological and health risks of potentially toxic elements in agricultural soils in Southern Yunnan Province and associated uncertainty analysis

Source-specific risk apportionment is critical to prevent and control soil potentially toxic element (PTE) pollution. This study explored source-specific ecological and human health risks of soil PTEs in Southern Yunnan Province. Geochemical baseline values were determined to assess the pollution level of PTEs; then source-specific risk was apportioned combining positive matrix factorization (PMF) with ecological and human health risk assessment. Obvious accumulation of As, Cd, Pb, and Zn was observed in this area, especially Cd in 21.33% of the samples exhibited significant enrichment. Four sources were quantified based on PMF assisted with GIS-mapping: natural sources (41.49%), traffic emissions (24.70%), industrial activities (17.48%), and agricultural activities (16.33%). Industrial activities were the largest source (64.55%) to ecological risk. Agricultural activities were regarded as the major contributor to non-carcinogenic (adults: 75.93%, children: 62.33%) and carcinogenic risks (adults: 55.97%, children: 56.36%). Non-carcinogenic and carcinogenic risks for children were higher than adults, and their health risks showed similar trend. Thus, agricultural activities should be regarded as a priority to reduce health risk, whereas industrial activities should be given priority to control ecological risk. Although source-specific risk was quantified, combination with bioavailability and interactions of PTEs are necessary to obtain more accurate results in future.

Distribution characteristics, bioaccumulation and trophic transfer of heavy metals in the food web of grassland ecosystems

In this study, according to the classification of biological "classes" and the different trophic levels of the food web, the distribution characteristics, bioaccumulation of heavy metals (HMs) and their trophic transfer in the food web of typical grassland ecosystems were studied and predicted. The results indicated that the accumulation of toxic As was the highest in small mammals and reptiles, Cu was the highest in insects, and the micronutrient Zn in large mammals was higher than that in plants. The metal transfer factor (MTF) by plants at the first trophic level showed that Leymus chinensis had the best ability to absorb HMs from soil. The trophic transfer factor (TTF) of HMs in the second-trophic level insects, birds and some mammals were Zn > As > Cu > Ni > Pb > Co = Cr > Mn > V, in which, biomagnified on Zn, As, and Cu. Organisms at the third trophic level including birds, reptiles and some mammals had the strongest accumulation ability for Pb, V and As, and all were biomagnified. The biomagnification on As and Co of the fourth trophic level Siberian weasel was obviously higher than that of Dione's rat-snake, which had significant biomagnification effect on As by preying on Steppe toad-headed agama. The study showed that the bioaccumulation levels of HMs in organisms at different trophic levels varied significantly with species, prey, and organ type, but they all showed strong bioaccumulation capacity to toxic As, which indicated that As could produce certain toxic effects on animals in the food web through trophic transfer. In addition, organisms at low-trophic levels were more likely to biomagnify Zn, while organisms at high-trophic levels were more likely to biodilute Pb.

Risk assessment and ecotoxicological diagnosis of soil from a chemical industry park in Nanjing, China

Soil pollution due to the activities of industrial parks, is becoming an increasingly serious issue, particularly throughout China. Therefore, it is essential to explore the soil pollution characteristics and its ecotoxicological effects on model species, such as higher plant species, in typical industrial areas. In this study, concentrations of heavy metals and polycyclic aromatic hydrocarbons (PAHs) were examined in the soil collected from 10 sampling sites at a chemical industry park in Nanjing, China. The pollution index was used to assess the heavy metal pollution level of soils, while the hazard index (HI) and carcinogenic risk index (RI) were calculated to assess the human health risk of soil PAHs. In addition, wheat (Triticum aestivum L.) was used as the model species to evaluate the ecotoxicological effects of polluted soil in pot experiments. Results showed that the content of heavy metals and PAHs varied greatly in soil samples, among which the heavy metal pollution at S1, S2 and S3 was the most serious. The health risk assessment of PAHs indicated that non-carcinogenic and carcinogenic values for all soil samples were below the threshold levels. Statistical analysis of the correlation between contaminated soil and toxic effects in wheat found that the significance values of regression equations were all less than 0.05 for chlorophyll content, peroxidase (POD) and amylase (AMS) activity. This indicates that the chlorophyll content, POD and AMS activity in wheat leaves could be suitable biomarkers for evaluation of the combined toxicity of multiple pollutants. This study provides a reference for future research on the risk assessment of soil containing multiple pollutants from industrial chemical parks.

Physiological and Biochemical Effects of Cd Stress in Thlaspi Arvense L-A Non-Accumulator of Metals

The field pennycress (Thlaspi arvense L.) is a sensitive non-accumulator of metals. The main objective of the present work was to evaluate the effects of Cd stress in T. arvense using a physiological approach. Four-week-old plants were exposed to increasing concentrations of Cd (0, 10, 50 and 100 μM Cd(NO₃)₂) for 14 days. Plants were harvested at days 0, 3, 7 and 14 to assess the following parameters: shoot and root length and fresh weight; osmolality and conductivity in leaves; chlorophyll a and b contents and photosynthetic efficiency in leaves (young and expanded); water content, Cd accumulation and nutrient imbalances in leaves (young and expanded) and roots. Thlaspi arvense presented a reduction of 27% in the length of roots exposed to 100 μM Cd, and in plants exposed to 50 and 100 μM Cd, a reduction in the fresh weight of both shoots (53 and 58%, respectively) and roots (58 and 63%, respectively) was observed. In general, in plants exposed to the highest concentrations of Cd, a decrease in leaves osmolality and membrane permeability and in water content of both roots and leaves were observed, as well as several nutrient imbalances. As for the photosynthetic parameters, young and expanded leaves responded differently to Cd stress. Exposed young leaves presented no alterations in photosynthetic efficiency or chlorophyll contents, while expanded leaves of 100 μM Cd-treated plants showed a reduction of up to 67% in chlorophyll contents and a concomitant reduction of 30% in photosynthetic efficiency. Overall, Cd-induced senescence in the non-accumulator plant T. arvense exposed to high concentrations of Cd, which was measured as a decrease in several physiological and biochemical parameters and nutrient imbalances. These Cd-induced alterations resulted in lower plant growth, which might have further implications on plant performance at the population level.

Exploring human health risk assessment based on the screening of primary targeted metal and chemical balance simulation of ionic speciation in an industrial area, China

A comprehensive human health risk assessment methodology based on major hazard element screening and morphological evolution simulation is proposed. The primary targeted metal (PTM) screened by classical health risk assessment was introduced into chemical balance simulation to obtain speciation distribution and corresponding risk. According to the results of risk assessment of morphological evolution of primary targeted metal (PTM), a potential methodology for the remediation is proposed, which could reduce the risk level efficiently and quickly by changing the pH of soil environment with additional acid and alkali substances. A case study was performed in a dye factory in Suzhou city, Jiangsu Province, China. The results of classical health risk assessment showed that the regional health risk index for children exceeded tolerance value of 1, in which Cr accounted for high risk level of 61%. Chemical balance simulation results showed that CrO₄^2- and CaCrO₄ had the highest risk index, and the change of pH value would affect the proportion of CrO₄^2- and CaCrO₄ in Cr⁶⁺ ionic speciation, which may indirectly change the risk level. It is recommended to adjust the pH of the soil environment to quickly reduce regional human health risk. This study will provide a theoretical basis for public health protection and site restoration management.

Spatial distribution, ecological risk and sources of heavy metals in soils from a typical economic development area, Southeastern China

Identification and quantification of the distribution, ecological risk, and sources of heavy metals in soils are essential for regional pollution control and management. In this study, spatial analysis (SA), GeogDetector model (GDM), and positive matrix factorization (PMF) model were combined to evaluate the status, ecological risk, and sources of heavy metals in soils from a typical coastal economic development area in Southeastern China. The mean contents of Cd, Pb, Cr, Cu, and Zn in the surface soils (0-20 cm) were 0.45, 41.72, 90.50, 47.86, and 145.33 mg/kg, respectively. In accordance, the mean contents of Cd exceeded the risk screening value for contamination of agricultural soil in China. Our results revealed that industrial and residential soils had higher enrichment of heavy metals than agricultural and fallow soils. Industrial production was the major driving factors influencing the spatial distribution of heavy metals. Soil OM and pH were found to be the most important factors affecting the potential ecological risk of heavy metals, followed by distance from the industrial enterprises and roads. Heavy metals in the study area were mainly originated from industrial emissions/atmospheric deposition, agricultural sources, and followed by natural sources. Therefore, regular monitoring and source control for heavy metals, especially for Cd, along with the integrated soil environmental management in the study area are crucial to ensure soil health and ecosystem security.

Comprehensive assessment of heavy metal risk in soil-crop systems along the Yangtze River in Nanjing, Southeast China

Conventional assessment of soil environmental quality commonly focuses on soil heavy metals (HMs), neglecting the HMs in agricultural products. To response this shortcoming, a comprehensive assessment combining both soil environmental quality and agricultural product security for evaluating soil HM impact is urgently required. This comprehensive assessment incorporates not only the HM contents in soil and agricultural product but also soil environmental quality standards, soil elemental background values, and safety standards for HMs in agricultural products. In this study, it was applied to evaluate the potential risk of HMs in soil-crop systems (i.e., soil-vegetable, soil-maize, soil-rice, and soil-wheat systems) along the Yangtze River in Nanjing, Jiangsu Province, Southeast China. Furthermore, ¹¹⁴Cd/¹¹⁰Cd isotope ratio analysis was used to identify the specific contamination sources. The mean concentrations of Cd, As, Hg, Pb, Cu, Zn, and Cr in the surface soils (0-20 cm) were 0.26, 11.07, 0.09, 32.63, 38.57, and 107.92 mg kg^-1, respectively, exceeding the corresponding soil background values. Fertilizer and atmospheric deposition were the major anthropogenic sources of HM contamination in crop-growing soils. In addition to the crop type, soil pH and organic matter also influenced the transfer of HMs from soils to the edible parts of crops. Results of comprehensive assessment revealed that approximately 11.1% of paired soil-crop sites were multi-contaminated by HMs, among which paddy soils had the highest potential risk of HMs followed by maize soils, vegetable soils, and wheat soils. To evaluate the potential risk of HMs in arable land, this study provides a novel, scientific and reliable approach via integrating soil environmental quality and agricultural product security.

Potential Ecological Impacts of Heavy Metals in Sediments of Industrially Contaminated Perennial Drain of India

Globally, heavy metal contamination of natural waterways and surrounding environments due to anthropogenic activities has become a grave cause of concern. Therefore, the present study was conducted to analyze the ecological risk posed by heavy metals in sediment samples (N = 24) collected from different depths of Budha Nalah drain located in Ludhiana (Punjab, India). The concentration of As, Cd, Cr, Cu, Ni, Pb and Zn were found to be above the maximum permissible limits for metals in soils and sediments, which was attributed to anthropogenic activities (industrialization, urbanization and agriculture). The values observed for Contamination Factor, Enrichment Factor and Pollution Load Index revealed that sediment samples were highly contaminated by As, Cd, Cr and Pb. The ecological Risk Index (range: 212-1566) and Modified Risk Index (range: 2793-12,182) values indicated that high concentrations of metals (especially As, Cd, Cr and Pb) posed severe ecological risks in the areas around the drain.

Sewage sludge in agriculture - the effects of selected chemical pollutants and emerging genetic resistance determinants on the quality of soil and crops - a review

In line with sustainable development principles and in order to combat climate change, which contributes to progressive soil depletion, various solutions are being sought to use treated sewage sludge as a soil amendment to improve soil quality and enrich arable soils with adequate amounts of biogenic compounds. This review article focuses on the effects of the agricultural use of biosolids on the environment. The article reviews the existing knowledge on selected emerging contaminants in treated sewage sludge and describes the impact of these pollutants on the environment and living organisms based on 183 publications selected from over 16,000 papers on related topics published over the last ten years. This study deals not only with chemical contaminants but also genetic determinants of resistance to these compounds. Current research has questioned the agricultural use of biosolids due to the presence of mutual interactions between antibiotics, heavy metals, the genetic determinants of resistance (antibiotic resistance genes - ARGs and heavy metal resistance genes - HMRGs) and non-steroidal anti-inflammatory drugs as well as the risks associated with their transfer to the environment. This study emphasizes the need for more extensive legal regulations that account for other pollutants of environmental concern (PEC), particularly in countries where sewage sludge is applied in agriculture most extensively. Future research should focus on more effective methods of eliminating PEC from sewage sludge, especially from the sludge that is used to fertilize agricultural land, because even small amounts of these micropollutants can have serious implications for the health and life of humans and animals.

Quantitative source apportionment, risk assessment and distribution of heavy metals in agricultural soils from southern Shandong Peninsula of China

The heavy metals, including cadmium (Cd), chromium (Cr), copper (Cu), mercury (Hg), nickel (Ni), lead (Pb), zinc (Zn), and the metalloid arsenic (As) were detected in surface and core soil samples collected from a tobacco growing region in Shandong Peninsula on the east coast of China to evaluate their pollution levels, ecological and health risks, and to analyze their spatial and vertical distributions. The heavy metal sources were identified quantitatively using the positive matrix factorization (PMF) receptor model. In accordance, most of the soils did not have accumulations and were not contaminated by As, Cr, Cu, Ni, Pb, and Zn. High accumulations of Cd and Hg occurred in the soils, posing an ecological risk to the local agricultural environment, while Cr and Ni levels presented a carcinogenic health risk to humans. Four main sources of heavy metals in the soils were identified. Correspondingly Ni and Cr were mainly originated from natural sources, Hg from coal combustion, Cd from agricultural practices, Cu, Pb, and Zn from agricultural practices and industrial activities, and As from industrial activities.

Evaluation of heavy metal pollutants in salt and seawater under the influence of the Lyari River and potential health risk assessment

Heavy metals intoxication through edible salt poses serious health hazards. The conducted research assessed the levels of heavy metals, health risks of salt samples, and the pollution index of seawater obtained from saltpans located at Sandpit, Karachi, Pakistan, which receive untreated effluents through the Lyari River. Seawater (n = 27) and salt samples (n = 27) were prepared for the detection of Al, Cd, Pb, Cr, Fe, Cu, Hg, Ni, As and Zn through atomic absorption spectroscopy, mean concentrations ± S.D. (mg/mL) were compared with the National Environmental Quality Standards, Pakistan. The levels of Cr (40.06 ± 0.21) were the highest followed by Fe (39.77 ± 0.08) > As (25.12 ± 0.21) > Ni > Pb > Al > Hg > Zn > Cd > Cu. In sea salt (Mean ± S·D mg/Kg), the Cr (47.79 ± 0.19), Fe (47.5 ± 0.15), As (30.62 ± 0.22), and Ni were redundant elements followed by Al > Pb > Hg > Zn > Cu > Cd. The water comprehensive pollution index was 1000 times greater than the critical values. The single factor pollution index was highest for Hg (1321), followed by Cr (40), Ni (36), Pb (32), Al (31.4), Cd (31.3), and As (25). Health risk assessment indices (from salt samples), including target hazard quotient (THQ) for As, Pb, Al, Hg, and Cr were two to six times higher than the noncarcinogenic THQ reference range. Similarly, the hazardous index indicated that salt was 20 times hazardous (HI = 20.29), and the carcinogenic rate index for the heavy metals i.e., Cd, As, Cr, and Ni was above the reference CR value i.e., 1 × 10^-4. In conclusion, the experimental and theoretical approaches recommend that the use of contaminated salt may impart health hazards.

Ecological risk assessment and source apportionment of heavy metals contamination: an appraisal based on the Tellus soil survey

It is imperative to comprehend the level and spatial distribution of soil pollution with heavy metals to find sustainable management approaches for affected soils. Selected heavy metals (Mn, Zn, Pb, Cu, Cr, Ni, As, Co, and Cd) and physiochemical parameters were appraised for 620 samples from industrial, agricultural and urban sites in Northern Ireland using the Tellus database. The findings of this study showed that among the analyzed heavy metals, Mn content was the highest and Cd content the lowest. Pearson's correlation analysis revealed that heavy metals were highly correlated with each other, signifying similar sources for the heavy metals. Mixed factors (anthropogenic and lithogenic) were responsible for the contribution of heavy metals as revealed by multivariate statistical analysis. The results of contamination factor and enrichment factor analyses suggest that As, Cd, and Pb showed very high risk for pollution in the study area. The geoaccumulation index revealed that with the exception of Cd, all analyzed heavy metals showed severe accumulation in the soils. The potential and modified ecological risk indices inferred that Cd, As, and Pb represented ecological threats in the soils of Northern Ireland. The findings of this study will aid in forming approaches to decrease the risks associated with heavy metals in industrial, urban and agricultural soils, and help create guidelines to protect the environment from long-term accumulation of heavy metals.

Health risk assessment of total exposure from cadmium in South China

Heavy metal pollution and hazards are a global major concern. Heavy metals can be directly or indirectly harmful to humans through ingestion, inhalation, and deraml. According to the literature survey, cadmium (Cd) total exposure assessment and health risk assessment were performed in a population group from South China. Results showed that the Cd contents in PM_2.5 and vegetables exceeded national standard limits. The same sources of Cd pollution contributed to different media; the main sources were artificial industrial activities such as electroplating, mining and smelting. The average daily dose of Cd via ingestion exceeded the provisional tolerable monthly intake proposed by the Joint Expert Committee on Food Additives (JECFA). Multimedia exposure via all three pathways followed the order 0-5-year-old children (3.26 × 10^-3 mg kg^-1·d^-1)>6-17-year-old children (1.46 × 10^-3 mg kg^-1·d^-1)>adults (1.18 × 10^-3 mg kg^-1·d^-1). The exposure from point source pollution was quite different from the results for nonpoint sources. Ingestion was the exposure pathway that contributes the largest proportion of multipathway and multimedia total exposure, accounting for over 99% of the total exposure in different populations. Staple foods, vegetables and meat were the three main exposure media for ingestion. The hazard quotients of multipathway and multimedia exposure to Cd in different populations were 5.57, 2.87 and 2.26, respectively, all at unacceptable risk levels. This study highlights the importance of multipathway and multimedia in the health risk assessment of heavy metal exposure in South China, and provides risk management measures to reduce noncarcinogenic health risks.

The Levels, Sources, and Spatial Distribution of Heavy Metals in Soils from the Drinking Water Sources of Beijing, China

Our study area is the upstream watershed of the Guanting and Miyun Reservoirs; together, these two reservoirs comprise the main drinking water source of Beijing, China. In order to prevent crop contamination and preserve the quality of the water and soil, it is important to investigate the spatial distribution and the sources of the heavy metals in farmland soils on the watershed scale. For this study, we collected 23,851 farmland surface soil samples. Based on our analysis of the concentrations of eight heavy metals in these samples, we found that the overall soil quality in our study area is excellent, but that the Cd, Cu, Zn, and Cr contamination risks are relatively high. Moreover, a percentage of samples exceeded the Cd (1.54%,), Cu (0.28%), Zn (0.25%), Cr (0.13%), Pb (0.09%), As (0.05%), Ni (0.04%), and Hg (0.02%) risk screening values for soil contamination in agricultural land. In addition to determining the spatial distribution characteristics of the heavy metal concentrations of the soil samples, we also conducted a factor analysis and an R cluster analysis (CA) whcih can gathered the similar variables to track the sources of the heavy metals. We found that the Cd, Pb, and Zn are likely sourced from a quartz syenite porphyry body and from coal-fired enterprises, while the Cr, Cu, and Ni contaminations are mainly caused by runoff from iron ore smelting. Additionally, agricultural production contributes to the local accumulation of Cu, and industrial (smelting) discharge is partially responsible for the As contamination. As a result of the atmospheric deposition of pollutants, areas with high Hg concentrations are generally centered on large- and medium-sized cities. Due to these high natural heavy metal background values, the existing and future heavy metal contamination in the watershed poses a serious ecological risk to both the soil and the surface water.

Source apportionment and spatial distribution of potentially toxic elements in soils: A new exploration on receptor and geostatistical models

Potentially toxic element (PTE) pollution is considered as the main soil environmental problem in the world. Source apportionment and spatial pattern of soil PTEs are essential for soil management. US-EPA positive matrix factorization (EPAPMF) and sequential Gaussian simulation (SGS) are general modeling tools for source apportionment and spatial distribution, respectively. Factor analysis with nonnegative constraints (FA-NNC) and stochastic partial derivative equations (SPDE) provided potential tools for this issue. We compared the performance of FA-NNC with PMF and the performance of SPDE with SGS, based on a dataset containing 9 PTEs in 285 topsoil samples. Three factors were determined by the two receptor models, and the source contributions were similar, suggesting that FA-NNC can validly identify quantitative sources of soil PTEs. The average source contributions were calculated based on the PMF and FA-NNC. Natural sources dominated the contents of As, Co, Cr, Cu, Ni, and Zn and affected 56.0%, 38.7%, and 84.8% of the Cd, Hg, and Pb concentrations, respectively. A total of 59.8% of Hg and 12.0% of Pb were associated with atmospheric deposition from coal combustion, industrial and traffic emissions, respectively. Agricultural and industrial activities contributed 37.2% of Cd concentration. SPDE proved to be an effective geostatistical technique to simulate the spatial patterns of soil PTEs with higher prediction accuracy than SGS. Co, Cr, Cu, and Ni had similar spatial patterns with hotspots randomly distributed across the study area. The common hotspots of As, Cd, Hg, Pb, and Zn in central parts inherited their high geochemical background in mudstone, while intensive human inputs in these areas also contributed to the accumulation of Cd, Hg, and Pb.

Spatial distribution and risk assessment of agricultural soil pollution by hazardous elements in a transboundary river basin

The present study aimed to evaluate the sources of pollution and the potential human and ecological risks of hazardous elements (HEs) in 40 hotspot sites of the agricultural soil around the Arvand River, Iran. The mean concentrations of As, Cd, Co, Cr, Ni, Pb, Zn, and Hg were measured to be 7.2, 0.8, 14.0, 67.9, 69.5, 63.0, 296, and 0.66 (mg kg^-1), respectively. With the exception of Ni, the mean concentrations of all the elements were found to be higher than those in the background. The spatial distribution of HEs in the study area indicated an increasing trend of contamination from the north to the south. Pb, Zn, and Hg were the most enriched elements, resulting in a high pollution load. Moreover, the agricultural soil of the study area was threatened by a very high ecological risk due to the contribution of Hg, Cd, and Pb. Multivariate statistical analyses determined that the pollution sources are specified by the oil refinery emissions and effluents, irrigation with polluted water, fertilizers, dust storms, and airport emissions. The carcinogenic risk of HEs in both adults and children revealed an acceptable level; however, children faced a great chance of non-carcinogenic risk. The results provide a scientific basis for monitoring HEs and managing health risks via effective methods in the agricultural areas of the Arvand River basin.

Identification and uncertainty analysis of high-risk areas of heavy metals in sediments of the Yangtze River estuary, China

In this study, ordinary kriging (OK) and indicator kriging (IK) were used to analyze the uncertainty associated with high-risk areas of seven heavy metals (As, Cd, Cr, Cu, Hg, Pb, and Zn) in sediments of the Yangtze River estuary during four seasons. The OK results showed that the high-risk areas of Cd, Cr, Cu, Hg, and Pb had a high proportion, with the highest corresponding to Cr pollution (up to 60%). Predictions based on IK revealed that the proportion of high-risk areas of Cr, Cd, and Hg pollution were high, especially that of Cr was higher than 90%. However, there were uncertainties between the OK and IK results. The uncertainty results revealed that the uncertainty areas of Cr pollution were relatively large, accounting for about 30%, while those of Cd, Cu, and Hg pollution were lower than 10%.

Heavy Metals and Pesticides Toxicity in Agricultural Soil and Plants: Ecological Risks and Human Health Implications

Environmental problems have always received immense attention from scientists. Toxicants pollution is a critical environmental concern that has posed serious threats to human health and agricultural production. Heavy metals and pesticides are top of the list of environmental toxicants endangering nature. This review focuses on the toxic effect of heavy metals (cadmium (Cd), lead (Pb), copper (Cu), and zinc (Zn)) and pesticides (insecticides, herbicides, and fungicides) adversely influencing the agricultural ecosystem (plant and soil) and human health. Furthermore, heavy metals accumulation and pesticide residues in soils and plants have been discussed in detail. In addition, the characteristics of contaminated soil and plant physiological parameters have been reviewed. Moreover, human diseases caused by exposure to heavy metals and pesticides were also reported. The bioaccumulation, mechanism of action, and transmission pathways of both heavy metals and pesticides are emphasized. In addition, the bioavailability in soil and plant uptake of these contaminants has also been considered. Meanwhile, the synergistic and antagonistic interactions between heavy metals and pesticides and their combined toxic effects have been discussed. Previous relevant studies are included to cover all aspects of this review. The information in this review provides deep insights into the understanding of environmental toxicants and their hazardous effects.

An integrated exploration on health risk assessment quantification of potentially hazardous elements in soils from the perspective of sources

To make pollution evaluation of potentially hazardous elements in the soil more accurately, the regional geochemical baseline concentrations of eight potentially hazardous elements (Cr, Ni, Cu, Zn, As, Cd, Hg, and Pb) were established in Huilai County using cumulative frequency distribution curves. Then, the pollution load index and enrichment factor were applied to estimate the contamination levels, based on these geochemical baseline concentrations. The results suggested that topsoil was moderately polluted by potentially hazardous elements, while Cd pollution in the construction land and As pollution in the farmland was relatively severe. The possible sources of eight potentially hazardous elements were analyzed by correlation analysis, geostatistics and positive matrix factorization. Four sources have been determined and apportioned, namely industrial activities, natural sources, agricultural practices, and traffic emissions. Combining the health risk assessment with the source profiles, the health risks quantified from four sources were estimated under farmland, construction land, and woodland. The results showed that agricultural practices were the most main source of non-cancer and cancer risks under woodland and farmland for adults; industrial activities were the most main source of non-cancer and cancer risks under construction land for adults. Children's health risks, both carcinogenic risk and non-carcinogenic risk, were greater than adults, and the health risk trends of adults and children showed similarities. Therefore, agricultural practices under woodland and farmland should be controlled and managed as a priority, while industrial activities should be given priority to control and management under construction land.

Long-term impact of accidental pollution on the distribution and risks of metals and metalloids in the sediment of the Longjiang River, China

In January 2012, a serious accident polluted the Longjiang River with high concentrations of cadmium (Cd) and other concomitant metals and metalloids in the water. After emergency treatment (i.e., the addition of coagulants), these metals and metalloids were transferred from the water into the sediment through precipitation of the flocculent materials produced. In this study, the long-term distribution of six metals and metalloids in the sediment of the Longjiang River was investigated and their ecological risks were assessed. Approximately 1 year after the accident (i.e., late 2012), the average Cd content in the sediment of the affected sites decreased to 25.6 ± 19.5 mg/kg, which was 8 times higher than that of 3.16 ± 3.18 mg/kg in the upstream reference sites. In 2016 and 2017, the average Cd content in the sediment of the affected sites further decreased to 4.91 ± 2.23 and 6.27 ± 4.27 mg/kg, respectively. Compared with late 2012, the amounts of Zn, Pb, and Cu obviously decreased in 2016 and 2017, whereas there were no obvious differences in the As and Hg amounts during 3 years considered. Among metals and metalloids, the average contribution of Cd to the potential ecological risk index (RI) was 90%, 69%, and 70% in the affected areas in 2012, 2016, and 2017, respectively, suggesting that Cd was the most important factor affecting the ecological risk of metals in the Longjiang River. It should be noted that the average contribution of Hg to RI in the affected areas increased from 8% in 2012 to 25% and 23% in 2016 and 2017, respectively. The sequence of contribution of six elements was Cd > Hg > As>Pb > Cu ≈ Zn. A high ecological risk of metals and metalloids was found in the sediments of two reservoirs, probably owing to the barrier effect of the dam. This study will be useful for the environmental management of rivers affected by accidental pollution of metals and metalloids.

Spatial Distribution and Source Apportionment of Agricultural Soil Heavy Metals in a Rapidly Developing Area in East China

We collected 682 topsoil samples (0-20cm) from agricultural lands of Luhe County in East China, and analyzed the spatial distribution patterns and potential sources of four major heavy metals. High Pb and Cr were mainly in the southeast adjacent to the Yangtze River, and Cd were characterized by an increasing trend from northwest to southeast, while high Hg mainly occurred in the areas near downtown. Spatially-continuous sources dominated the soil heavy metal concentrations. Contributions of spatially-continuous natural source (soil parent material) to Cr and Cd were 97.0% and 77.7%, respectively, whereas contributions of spatially-continuous anthropogenic source such as diffuse pollution to Pb and Hg were 75.7% and 86.7%, respectively. The distance to factories was the most influential anthropogenic factor for localized anomaly patterns of Pb, Cd, and Cr, while the intensive agricultural land uses associated with the rapid urban expansion were particularly relevant to the anomaly patterns of Hg.

Distributional Characteristics and Source Identification of Cadmium in Soils of the Pearl River Delta, China

The results of the Multi-Purpose Geochemical Survey in the Pearl River Delta (PRD) show that the pollution is serious. In this study, the influence of geological genesis, soil-forming process, and human activities on soil quality in PRD is analyzed, and the influence factors, genesis and spatial distributional characteristics of cadmium (Cd) in different soil depths are studied by inverse distance weighted (IDW) and hot spot analysis. The results show that the spatial distribution of Cd is significantly different in PRD and high-value is mainly concentrated in the central cities of Guangzhou-Foshan-Jiangmen-Zhongshan-Zhuhai. Moreover, hot spots with higher Cd content in deep are mainly along Beijiang, Dongjiang, and Pearl River Estuary (PRE). Overall, our findings suggest that the high background value areas formed by marine-land and fluvial sediments as well as intensive human activities that make PRD become an area under the dual restriction of geological genesis and human activities, pollution control cannot be ignored.

Exploring the fate of heavy metals from mining and smelting activities in soil-crop system in Baiyin, NW China

The activity and fate of heavy metals (HMs) from mining and smelting activities in farmland soil is of great significance to effectively prevent the excessive enrichment of HMs in crops. This study focuses on Baiyin area, a typical mining city in northwest China. In this example, the sources, speciation, and fate of HMs in the farmland soil, and the migration and enrichment characteristics of HMs in the different parts of crops planted in different areas were studied in detail combining the chemical sequential extraction and Pb isotope approaches. Results showed that the mean anthropogenic contributions of HMs in farmland soils were approximately 85%, 88%, 76%, and 41% for the ore district (OD), Xidagou sewage irrigation area (XSIA), Dongdagou sewage irrigation area, and the Yellow River irrigation area, respectively, and the risk that HMs were excessively accumulated in crops in OD and XSIA was high. Compared with soil residual fractions, the isotope ratios ²⁰⁶Pb/²⁰⁷Pb in non-residual fractions (1.1304-1.1669) were closer to the values of local ores, suggesting that anthropogenic HMs from mining and smelting activities were mainly enriched in the non-residual fractions. The isotope ratios ²⁰⁶Pb/²⁰⁷Pb in crops (1.1398-1.1686) further confirmed that those anthropogenic HMs were more easily absorbed and concentrated by crops. HMs contents in leaves from OD and XSIA were generally higher than that in roots, suggesting that atmospheric deposition in OD and XSIA had a greater impact on the HMs concentration of crop leaves，while the excess rate of HMs in grain/fruit was the lowest in all parts of crops. The division and classification of crop planting in mining area can effectively help minimize the risk that HMs from anthropogenic source enter the human body through the food chain.

Human health and ecological risk assessment of heavy metal(loid)s in agricultural soils of rural areas: A case study in Kurdistan Province, Iran

BACKGROUND

Agricultural soils pollution with heavy metal (loid) s (HMs) can create significant ecological and health problems. The aims of present study were to characterize HMs pollution profile of dry farmland soils in rural areas of Kurdistan province in Iran and evaluate potential associated ecological and health risks.

METHODS

Different indices of Geo-accumulation index (I_Geo), Individual contamination factor (ICF), Nemerow composite pollution index (NCPI) and Potential Ecological Risk Index (PERI) were employed to assess the bio-accumulation of the HMs and evaluate associated ecological risks. Human health risks estimated with total hazard index (THI) and total carcinogenic risk (TCR) indices based on ingestion, inhalation and dermal exposure pathways for children and adults.

RESULTS

As, Cd, Cr, Ni and Pb exceeded the soil standards. The spatial maps of the I_Geo showed that As pollution was at severe level in eastern part of the study region. According to the ICF results, the studied soils were extremely contaminated with As, Cd, Cr, Ni and Zn. Furthermore, based on the pollution indices, some of sampling sites were critically polluted by abovementioned HMs. For children and adults groups, the THI values in 13 and 97% of sampling sites were more than 1 and the TCR in 7 and 14% of sampling sites were more than 10^-4, respectively. The farmland soil pollution of the study area by As and Cr were found to be quite serious and dangerous.

CONCLUSION

The findings of this study suggest that further attention should be paid by decision-makers to control the HMs pollution in the agricultural soils of the study area.

Characteristics and sources of heavy metal pollution in desert steppe soil related to transportation and industrial activities

A study area was selected from the industrial region of Gaoshawo Town, Yanchi County, Ningxia, to explore the level of heavy metal pollution in desert grasslands due to industrial activities. A total of 82 surface soils were collected, and the concentration of heavy metals, namely, Cu, Cd, Cr, Pb, Zn, Mn, and Co, was determined by ICP-AES (atomic emission spectrometer) (HK-8100); the average values were 21.64 ± 3.26, 0.18 ± 0.02, 44.99 ± 21.23, 87.18 ± 25.84, 86.63 ± 24.98, 570.49 ± 171.57, and 17.96 ± 9.96 mg kg^-1. The single-factor, Nemerow pollution, and potential ecological risk index methods were used to evaluate the status of soil heavy metal pollution and the contribution from the major sources identified by the receptor model. The results showed that 9.09% of the samples were slightly polluted, 32.47% of the samples were moderately polluted, and 58.41% of the samples were heavily polluted. The comprehensive potential ecological risk index indicated that 90.79% of the samples had moderate ecological risk. It was verified from the models and spatial distribution maps that Cr, Co, Zn, and Mn are mainly contributed by the industrial sources that account for 55.04%, 92.13%, 50.05%, and 48.77% of these heavy metals, respectively. The heavily contaminated areas are distributed around the industrial park. A total of 70.63% and 77.83% of Cu and Pb are contributed by transportation sources, respectively, with the concentrations decreasing from southwest to northeast. The contribution from agricultural activities to Cd is 77.02%, with concentrations largely distributed in the north of the highway. This study showed that the existence of the Gaoshawo Industrial Zone and the corresponding industrial and transportation activities have a significant impact on the grassland soil environment.

Current status, spatial features, health risks, and potential driving factors of soil heavy metal pollution in China at province level

In this study we systematically reviewed 1203 research papers published between 2008 and 2018 in China and recorded related data on eight kinds of soil heavy metals (Cr, Pb, Cd, Hg, As, Cu, Zn, and Ni). Based on that, the pollution levels, ecological risk and health risk caused by soil heavy metals were evaluated and the pollution hot spots and potential driving factors of different heavy metals in different provinces were also identified. Results indicated accumulation of heavy metals in soils of most provinces in China compared with background values. Consistent with previous findings, the most prevalent polluted heavy metals were Cd and Hg. Polluted regions are mainly located in central, southern and southwestern China. Hunan, Guangxi, Yunnan, and Guangdong provinces were the most polluted provinces. For the potential health risk caused by heavy metals pollution, children are more likely confront with non-carcinogenic risk than adults and seniors. And children in Hunan and Guangxi province were experiencing relatively larger non-carcinogenic risk. In addition, children in part of provinces were undergoing potentially carcinogenic risks due to soil heavy metals exposure. Furthermore, in our study the 31 provinces in mainland China were divided into six subsets according to corresponding potential driving factors for heavy metal accumulation. Our study provide more comprehensive and updated information for contributing to better soil management, soil remediation, and soil contamination control in China.

Selenium and Nano-Selenium Biofortification for Human Health: Opportunities and Challenges

Selenium is an essential micronutrient required for the health of humans and lower plants, but its importance for higher plants is still being investigated. The biological functions of Se related to human health revolve around its presence in 25 known selenoproteins (e.g., selenocysteine or the 21st amino acid). Humans may receive their required Se through plant uptake of soil Se, foods enriched in Se, or Se dietary supplements. Selenium nanoparticles (Se-NPs) have been applied to biofortified foods and feeds. Due to low toxicity and high efficiency, Se-NPs are used in applications such as cancer therapy and nano-medicines. Selenium and nano-selenium may be able to support and enhance the productivity of cultivated plants and animals under stressful conditions because they are antimicrobial and anti-carcinogenic agents, with antioxidant capacity and immune-modulatory efficacy. Thus, nano-selenium could be inserted in the feeds of fish and livestock to improvise stress resilience and productivity. This review offers new insights in Se and Se-NPs biofortification for edible plants and farm animals under stressful environments. Further, extensive research on Se-NPs is required to identify possible adverse effects on humans and their cytotoxicity.

Biochemical and genetic basis of cadmium biosorption by Enterobacter ludwigii LY6, isolated from industrial contaminated soil

In this study, a cadmium-tolerant bacterium, Enterobacter ludwigii LY6, was isolated from cadmium-contaminated soil in Shifang, Sichuan province, China. The cadmium chloride removal rate of the strain LY6 with a treatment of 100 mg/L cadmium chloride reached 56.0%. Scanning electron microscopy showed that exopolysaccharides (EPS) might be the main means of cadmium adsorption by the strain. X-ray powder diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDS) analyses indicated that cadmium sulfide nanoparticles formed on the surface of bacteria cultured in a medium containing 100 mg/L cadmium chloride. In addition, the expression of several genes increased with the increase of the cadmium concentration in the medium, including the multiple antibiotic resistance proteins marA and marR, and the cold shock protein CspA. GO functions, such as the redox activity, respiratory chain and transport functions, and KEGG pathways involved in "bacterial chemotaxis" and "terpenoid backbone biosynthesis" were found to be closely related to bacterial cadmium tolerance and biosorption. This is the first report that E. ludwigii can reduce sulfate to form cadmium sulfide nanoparticles under high concentration cadmium exposure. The genes related to cadmium tolerance identified in this study lay a foundation for the genetic breeding of cadmium-tolerant strains.

Accumulation of potentially toxic elements in agricultural soil and scenario analysis of cadmium inputs by fertilization: A case study in Quzhou county

Fertilizer application has greatly increased crop yield, however impurities in mineral or organic fertilizers, such as heavy metals, are being added to agricultural soils, which would pose a high risk for soil and crop production. 115 soil samples were collected from Quzhou, a typical agricultural county in the North China Plain, to investigate the total content of cadmium (Cd), arsenic (As), lead (Pb), nickel (Ni), copper (Cu), zinc (Zn) and chromium (Cr) in soils. The contamination levels and source apportionment of studied elements were explored by the pollution indices, multivariate statistical approaches and geostatistical analysis. The ranges of Cd, As, Pb, Ni, Cu, Zn and Cr were between 0.08 and 0.35, 5.34-15.9, 7.34-38.9, 12.9-61.3, 7.80-27.0, 31.4-154, and 17.0-50.5 mg/kg and with the mean values 0.16, 9.20, 16.0, 24.7, 17.6, 61.1, and 29.5 mg/kg, respectively. The studied area was slightly polluted mainly by Cd, and higher pollution was found in soils under vegetable crops. The application of mineral phosphate fertilizer and livestock manure were the main source of Cd and Zn, and other elements (As, Pb, Ni and Cu) might originate from soil parent materials. Scenario analyses were performed using the R programming language, based on the cadmium contents in mineral phosphate fertilizers and livestock manures. The results showed that the long-term application of phosphate fertilizers would lead to some Cd enrichment in soil without risk of substantial pollution. Compared to pure mineral fertilizers, the long-term application of blended fertilizers (30% livestock manures and 70% phosphate fertilizers) or livestock manures would incur a higher Cd pollution risk within a short period, with a maximum probability of Cd risk of 55.21%. Mitigation measurements and scientific agronomic practices should be developed to minimize the risk of potential toxic elements in agricultural soil.

Comparison of the concentrations, sources, and distributions of heavy metal(loid)s in agricultural soils of two provinces in the Yangtze River Delta, China

Jiangsu and Zhejiang provinces, located in the Yangtze River Delta (YRD) core region, are the most economically developed regions in China, as well as the areas with serious soil pollution. The concentrations, sources, and distributions of heavy metal(loid)s in agricultural soils of the two provinces were studied; positive matrix factorization model (PMF) analysis and kriging interpolation were combined to compare the pollution characteristics of heavy metal(loid)s. The results showed that the degree of accumulation might be more serious in Zhejiang province than in Jiangsu province, especially in terms of Cd, Hg, and Pb. PMF results showed anthropogenic activities were the dominant factors affecting the concentrations of soil heavy metal(loid)s. The contributions of the three sources in Jiangsu province were 40.28% natural and traffic sources, 37.49% agricultural sources, and 22.22% industrial and coal combustion sources. The contributions of the three sources in Zhejiang province were 43.45% agricultural and industrial sources, 32.15% natural sources, and 24.40% industrial sources. The kriging interpolation results of the two provinces showed that the concentrations of As, Cr, and Ni were significantly higher in Jiangsu province than in Zhejiang province; the concentrations of Cu were similar in the two provinces, while other heavy metals had higher concentrations in Zhejiang province. These accumulations of heavy metal(loid)s in agricultural soil in both provinces cannot be ignored. This work will contribute to the development of effective policies aimed at protecting the soil environment from long-term accumulation of heavy metal(loid)s.

Concentrations, Spatial Distributions, and Sources of Heavy Metals in Surface Soils of the Coal Mining City Wuhai, China

Various studies have shown that soils surrounding mining areas are seriously polluted by heavy metals. In this study, 58 topsoil samples were systematically collected throughout the coal mining city Wuhai, located within the Inner Mongolia Autonomous Region of China. The concentrations of As, Hg, Cr, Ni, Cu, Zn, Cd, and Pb in these samples were measured and statistically analyzed. The mean concentrations of all heavy metals were lower than their Grade I values defined by the Chinese Soil Quality Standard. However, the mean concentrations of individual heavy metals in many samples exceeded their background values. The spatial distribution of heavy metals was analyzed by the ordinary kriging interpolation method. The positive matrix factorization model was used to ascertain contamination sources of the eight heavy metals and to apportion the contribution of each source. The most severely polluted area was the Wuhushan mine site in the Wuda district of Wuhai. Our results showed that coal mining strongly affected heavy metal contamination of the local soils. Results of source apportionment indicated that contributions from industrial activities, atmospheric deposition, agricultural activities, and natural sources were 31.3%, 26.3%, 21.9%, and 20.5%, respectively. This clearly demonstrates that anthropogenic activities have markedly higher contribution rates than natural sources to heavy metal pollution in soils in this area.

Environmental Risk Evaluation and Source Identification of Heavy Metal(loid)s in Agricultural Soil of Shangdan Valley, Northwest China

To understand the environmental quality and heavy metal(loid) pollution of farmlands in Shangdan Valley, the contents of macroelements (Na, K, Si, Mg, Ca, Al, Fe, Ti, P, S, Cl, Br) and heavy metal(loid)s (Cu, Pb, Zn, Mn, Ni, V, Co, Cr, As) were surveyed by the X-ray fluorescence method. The pollution degree and ecological risk of the heavy metal(loid)s were judged by the Nemerow synthetic pollution index, geo-accumulation index, and potential ecological risk index, and their sources were identified by the multivariate statistic method. The mean contents of nine heavy metal(loid)s in Shangdan Valley farmland soil exceeded their corresponding reference values. Soils were not contaminated with As, Cr, Mn, and Ni but were slightly contaminated with Co, Cu, Pb, V, and Zn. Their comprehensive pollution levels were moderate to serious. The ecological risk index of single heavy metal(loid) decreased in the sequence As > Pb > Co > Cu > Ni > V > Zn > Cr > Mn. The source analysis results indicated that Cu, Pb, Zn, and As were highly affected by anthropogenic inputs, e.g., metal smelting and agricultural activities, while Mn, Ni, Cr, and V were principally derived from a natural source. As for Co, it was affected by a mixture source of nature, fossil fuel combustion, and fertilizer.

Risk Assessment and Source Apportionment of Soil Heavy Metals under Different Land Use in a Typical Estuary Alluvial Island

Understanding the environmental risks of soil heavy metals (HMs) and identifying their main sources are the essential prerequisites for the prevention and management of soil pollution. Based on a detailed survey of soil HMs (Cu, Cr, Ni, Zn, Pb, Cd, As and Hg) from different land use types (including agricultural land, construction land, wetland, and forest land) in an estuary alluvial island, the environmental risk and source apportionment of soil HMs were investigated. Altogether, 117 soil samples were taken in the study area to appraise the soil HMs environmental risk by using the geo-accumulation index (Igeo), potential ecological risk index (RI), and human health risk assessment (HRA) and to identify its main sources by using positive matrix factorization (PMF) model. The average concentrations of soil HMs (except As) surpassed their reference background values in China. There were no significant differenced in the mean concentrations of HMs in different land use types, except that the Hg concentration in the construction land was significantly higher than that in others. The results of Igeo showed that Cd pollution was unpolluted to moderately polluted, and that the others were unpolluted. The potential ecological risk level for Cd and Hg was "moderated potential risk", while for Cu, Cr, Ni, Zn, Pb and As was "low potential risk". Higher contamination was distributed at the west-central area. The results of the HRA indicated that the non-carcinogenic risk and the carcinogenic risk that human beings suffered from HMs in different land uses were insignificant. To more accurately identify the sources of soil HMs, the PMF model coupled with the GIS-spatial analysis was applied. The results showed that agricultural activities, natural source, industrial discharge and river transportation, and atmosphere deposition were the main determining factors for the accumulation of soil HMs in the study area, with the contribution rate of 24.25%, 23.79%, 23.84%, and 28.12%, respectively. The study provides an underlying insight needed to control of the soil HM pollutions for an estuary alluvial island.

Regulation of Cu and Zn migration in soil by biochar during snowmelt

To study the migration characteristics of the heavy metals Cu and Zn carried by snowmelt water infiltrating soil during snowmelt periods and the regulation of this process by biochar, field experiments were carried out in which the variation in the Cu and Zn contents in soils on bare land (S1) and in soils with biochar coverage (S2) were analysed before snowfall and during snowmelt periods, and the degree of Cu and Zn pollution was determined on the basis of the enrichment factor (EF) and index of geoaccumulation (I_geo). The migration characteristics of Cu and Zn in soil were studied by combining the migration coefficient and leaching ratio. During the snowmelt period, the use of biochar reduced the migration coefficients of Cu and Zn carried by snowmelt water in shallow soil. The transport coefficients (T_j) of Cu and Zn in shallow soil (0-30 cm) in the S2 treatment were 0.89 and 0.81, respectively, lower than those in the S1 treatment. In addition, during the snowmelt period, the leaching ratios (C_ij) of Cu and Zn in the 0-10 cm soil layer of the S2 treatment were 0.22 and 0.24 less than those of the S1 treatment, the index of geoaccumulation (I_geo) was 0.52 and 0.23 less, and the enrichment factor (EF) was 1.20 and 0.09 less, respectively. This study provides practical and theoretical guidance for future research on soil heavy metal pollution mitigation.

Spatiotemporal patterns and drivers of soil contamination with heavy metals during an intensive urbanization period (1989-2018) in southern China

This three-decade long study was conducted in the Pearl River Delta (PRD), a rapidly urbanizing region in southern China. Extensive soil samples for a diverse land uses were collected in 1989 (113), 2005 (1384), 2009 (521), and 2018 (421) for heavy metals of As, Cr, Cd, Cu, Hg, Ni, Pb and Zn. Multiple pollution indices and Structural Equation Models (SEMs) were used in attribution analysis and comprehensive assessments. Data showed that majority of the sampling sites was contaminated by one or more heavy metals, but pollutant concentrations had not reached levels of concerns for food security or human health. There was an increasing trend in heavy metal contamination over time and the variations of soil contamination were site-, time- and pollutant-dependent. Areas with high concentrations of heavy metals overlapped with highly industrialized and populated areas in western part of the study region. A dozen SEMs path analyses were used to compare the relative influences of key environmental factors on soil contamination across space and time. The high or elevated soil contaminations by As, Cr, Ni, Cu and Zn were primarily affected by soil properties during the study period, except 1989-2005, followed by land use patterns. Parent materials had a significant effect on elevated soil contamination of Cd, Cr, Ni, Pb and overall soil pollution during 1989-2005. We hypothesized that other factors not considered in the present study, such as atmospheric deposition, sewage irrigation, and agrochemical uses, may be also important to explain the variability of soil contamination. This study implied that strategies to improve soil physiochemical properties and optimize landscape structures are viable methods to mitigate soil contamination. Future studies should monitor pollutant sources identified by this study to fully understand the causes of heavy metal contamination in rapidly industrialized regions in southern China.

Source apportionment of soil contamination based on multivariate receptor and robust geostatistics in a typical rural–urban area, Wuhan city, middle China

In this study topsoil samples were collected from 57 sites of Dongxihu District which is a typical Chinese urban–rural combination area, to analyze the causes and effects of 6 heavy elements. (Ni, Pb, As, Cu, Cd, and Hg) Pollution of Enrichment factor, multivariate statistics, geostatistics were adopted to study the spatial pollution pattern and to identify the priority pollutants and regions of concern and sources of studied metals. Most importantly, the study area was creatively divided into central urban, semi-urbanized, and rural areas in accordance with the characteristics of urban development and land use. The results show that the pollution degree of potential ecological risk assessment is Hg>Ni>Cu>As>Cd>Pb, and semi-urban regions> city center> rural areas. Results based on the proposed integrated source identification method indicated that As was probably sourced from agricultural sources (33.99%), Pb was associated with atmospheric deposition (50.11%), Cu was related to industrial source 1 (45.97%), Cd was mainly derived from industrial source 2 (42.97%) and Hg come mainly from industrial source 3 (56.22%). The pollution in semi-urban areas in urbanization need more attention.

Heavy metal concentrations of soils near the large opencast coal mine pits in China

Mining is a common industrial activity and significant source of soil heavy metal (HM) pollution. However, nearly all studies on the effects of mining activities on soil environmental quality have entailed field monitoring of small regions or bibliometric analyses. This study therefore investigated the pollution of surface soils surrounding 135 large opencast coal mining pits in China. A total of 1772 surface soil samples were collected, and the concentrations of eight major HMs were determined. The HM concentrations in this study were relatively lower than the published HM concentrations of coal mine soils from 50 typical Chinese coal mines. However, pollution assessments indicated that Cd, Cu, and As concentrations were concerning. Significant correlations existed between all of the HMs and mining pit area (p < 0.01), as well as between the Pb and Zn concentrations and direction (p < 0.05). Climate conditions had large influences on the HM concentrations. The concentrations of all studied HMs, except for Ni, were highest in Anthrosols and lowest in hydromorphic soils. The concentrations of all HMs, except for Hg, in land use types showed a descending trend of cultivated land > garden plot > grassland. Significantly negative correlations (p < 0.01) between all HM concentrations and elevation were observed. Cr, Zn, and Ni were significantly and positively correlated with the slope, and no HMs, except Cr, showed significant correlations with the parcel area. This paper provides insights for the policymakers regarding soil pollution control and management strategies near coal mine pits.

Identifying quantitative sources and spatial distributions of potentially toxic elements in soils by using three receptor models and sequential indicator simulation

Determining the reliable source contribution and spatial distribution of potentially toxic elements (PTEs) is a focal issue for soil regulation and remediation. For this purpose, three receptor models, US-EPA positive matrix factorization (EPAPMF), weighted alternating least squares positive matrix factorization (WALSPMF), and non-negative constrained absolutely principle analysis (NCAPCA), were used to a dataset consisting of ten PTEs (As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, and Zn) for source apportionment. Hazardous areas of ten PTEs were delineated using sequential indicator simulation (SIS) and uncertainty analysis. Three factors for ten PTEs were derived by three receptor models with a one-to-one correspondence between the factors. To obtain more appropriate results, the three receptor models were combined to calculate the ensemble-average source contributions. As, Co, Cr, Cu, Mn, and Ni were derived from a natural source with ensemble-average contributions higher than 85.72%. Cd, Hg, Pb, and Zn were contributed by both parent material and anthropogenic influence. More than half of Hg concentrations were associated with atmospheric deposition caused by human emissions. The concentrations of 28.04% for Cd, 20.74% for Hg, 43.49% for Pb, and 23.71% for Zn were associated with human inputs including agriculture practice, industrial activities, and vehicle emissions. The maps of spatial distribution generated by the SIS indicated that parent materials controlled the spatial distributions of As, Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn. 27.1% and 32.1% of the total area for Cd and Hg were identified as hazardous areas exceeding 1.5 times background values of Shandong province.