Integrating micro-algae into wastewater treatment: A review

Focus on the role of synthetic phytohormone for mixotrophic growth and lipid accumulation by Chlorella pyrenoidosa

Synthetic phytohormone (SP) is regarded as an attractive candidate for microalgae cultivation due to its potential for high-value microalgae biomass production. Herein, α-naphthylacetic acid (NAA), indomethacin (IN) and 2,4-dichlorophenoxyacetic acid (2,4-D) were used for the mixotrophic cultivation of Chlorella pyrenoidosa with mariculture wastewater (MW) acidogenic fermentation effluent. The growth and lipid accumulation of Chlorella pyrenoidosa added with SP were enhanced, given their high bioavailability of the nutrients. Among these three SPs, IN was optimal for Chlorella pyrenoidosa growth, with the maximum optical density of 1.81. NAA exhibited the best performance for lipid production and the proportion of lipid reached 50.24%. Furthermore, the energy of Chlorella pyrenoidosa cultured with SP preferentially allocated to lipogenesis. To understand the mechanism of lipid accumulation in Chlorella pyrenoidosa in response to SP, the enzyme activities involved in carbon metabolism were determined. The malic enzyme (ME) and acetyl-CoA carboxylase (ACCase) were positively correlated with lipid accumulation. Phosphoenolpyruvate carboxylase (PEPC) was the negative feedback enzyme for lipid synthesis. The findings could provide valuable information for regulation mechanism of lipid accumulation and value-added products recovery by microalgae.

Carbon dissipation from surgical cotton production wastewater using macroalgae, microalgae, and activated sludge microbes

Surgical cotton production has drastically been increased in the past few years due to excessive use by medical health professionals especially in countries like India, which is among the top three exporters of cotton worldwide. The effluent generated from surgical cotton industries differ from textile effluents by the conspicuous absence of dyeing chemicals. This wastewater has a high concentration of suspended particles, COD, dissolved ions, organic carbon, and alkaline pH. Several studies have been published on the treatment of textile effluents and the degradation of dyeing chemicals, while the treatment studies on surgical cotton wastewater have been rarely reported in spite of their potential to cause pollution in receiving land/water bodies. Activated sludge microbes have been extensively studied and well documented in the treatment of several industrial effluent but does not match to the production of valuable biomass from algae. The global energy demand has prompted the scientific community to investigate and explore the possibility of using algae for energy production with simultaneous wastewater treatment. To the best of the authors' knowledge, no research articles have been published which compare the effectiveness of activated sludge microorganisms, microalgae, and macroalgae in removing contaminants from real wastewater. To date, there is a knowledge gap in understanding and selecting the right choice of biological system for effective and economical effluent treatment. In an attempt to minimize this gap, carbon removal by microalgae, macroalgae, and activated sludge microbes were investigated on real effluent from surgical cotton industries. It was observed that the strain of Chlorella vulgaris could dissipate 83% of COD from real wastewater, while consortia of macroalgae (consisting predominantly of Ulvaceae and Chaetomorpha) and activated sludge microbes could remove 81% and 69% of the carbon, respectively. The microalgal growth (in terms of wet weight) increased from 0.15 to 0.3 g, whereas the macroalgal wet weight increased from 1.5 to 3 g in over 7 days of batch experiments conducted in triplicates. This indicated the superlative performance of microalgae over activated sludge microbes in carbon dissipation.

Microalgae Harvesting after Tertiary Wastewater Treatment with White-Rot Fungi

Tertiary wastewater treatment with microalgae incorporates environmental sustainability with future technologies and high exploitation costs. Despite the apparent ecological benefits of microalgae-assisted wastewater treatment/biomass-based resource production, technological improvements are still essential to compete with other technologies. Bio-flocculation instead of mechanical harvesting has been demonstrated as an alternative cost-effective approach. So far, mostly filamentous fungi of genus Aspergillus have been used for this purpose. Within this study, we demonstrate a novel approach of using white-rot fungi, with especially high potential of algae-Irpex lacteus complex that demonstrates efficiency with various microalgae species at a broad range of temperatures (5-20 °C) and various pH levels. Harvesting of microalgae from primary and secondary wastewater resulted in 73-93% removal efficiencies within the first 24 h and up to 95% after 48 h. The apparent reuse potential of the algae-I. lacteus pellets further complements the reduced operating costs and environmental sustainability of bio-flocculation technology.

Effect of co-culture with Halomonas mongoliensis on Dunaliella salina growth and phenol degradation

The discharge of industrial phenol wastewater has caused great harm to the environment. This study aims to construct microalgae and bacteria co-culture system to remove phenol from simulated high-salt phenol wastewater and accumulate microalgae biomass. The degradation of phenol by marine microalgae Dunaliella salina (D. salina) and phenol-degrading bacteria Halomonas mongoliensis (H. mongoliensis) was investigated preliminarily, and then the effects of co-culture H. mongoliensis and D. salina on the degradation of phenol and the growth of D. salina were studied. The effects of D. salina/H. mongoliensis inoculation ratio, light intensity, temperature and pH on the performance of the co-culture system were systematically evaluated and optimized. The optimal conditions for phenol degradation were as follows: a D. salina/H. mongoliensis inoculation ratio of 2:1, a light intensity of 120 μmol m-2 s-1, a temperature of 25°C and a pH around 7.5. Under optimal conditions, this co-culture system could completely degrade 400 mg L-1 of phenol within 5 days. Correspondingly, the phenol degradation rate of D. salina monoculture was only 30.3% ± 1.3% within 5 days. Meanwhile, the maximum biomass concentration of D. salina in coculture was 1.7 times compared to the monoculture. This study suggested that this coculture system had great potential for the bioremediation of phenol contaminants and accumulate microalgae biomass.

Emerging Technologies for Enhancing Microalgae Biofuel Production: Recent Progress, Barriers, and Limitations

The world has heavily relied on fossil fuels for decades to supply energy demands. However, the usage of fossil fuels has been strongly correlated with impactful problems, which lead to global warming. Moreover, the excessive use of fossil fuels has led to their rapid depletion. Hence, exploring other renewable and sustainable alternatives to fossil fuels is imperative. One of the most sustainable fossil fuel alternatives is biofuel. Microalgae-based biofuels are receiving the attention of researchers due to their numerous advantages compared with those obtained from other types of feedstocks. Hence, it is essential to explore the recent technologies for biofuel produced from microalgae species and define the possible challenges that might be faced during this process. Therefore, this work presents the recent advancements in biofuel production from microalgae, focusing on emerging technologies such as those using nanomaterials and genetic engineering. This review focuses on the impact of nanoparticles on the harvesting efficiency of various microalgae species and the influence of nanoparticles on biofuel production. The genetic screening performed by genome-scale mutant libraries and their high-throughput screening may assist in developing effective strategies for enhancing microalgal strains and oil production through the modification of enzymes. Furthermore, the barriers that limit the production of biofuels from microalgae are introduced. Even though microalgae-based biofuels are perceived to engage with low negative impacts on the environment, this review paper touches on several environmental issues associated with the cultivation and harvesting of microalgae species. Moreover, the economic and technical feasibility limits the production of microalgae-based biofuels.

Biological nitrogen removal from low carbon wastewater

Nitrogen has traditionally been removed from wastewater by nitrification and denitrification processes, in which organic carbon has been used as an electron donor during denitrification. However, some wastewaters contain low concentrations of organic carbon, which may require external organic carbon supply, increasing treatment costs. As a result, processes such as partial nitrification/anammox (anaerobic ammonium oxidation) (PN/A), autotrophic denitrification, nitritation-denitritation and bioelectrochemical processes have been studied as possible alternatives, and are thus evaluated in this study based on process kinetics, applicability at large-scale and process configuration. Oxygen demand for nitritation-denitritation and PN/A is 25% and 60% lower than for nitrification/denitrification, respectively. In addition, PN/A process does not require organic carbon supply, while its supply for nitritation-denitritation is 40% less than for nitrification/denitrification. Both PN/A and nitritation-denitritation produce less sludge compared to nitrification/denitrification, which saves on sludge handling costs. Similarly, autotrophic denitrification generates less sludge compared to heterotrophic denitrification and could save on sludge handling costs. However, autotrophic denitrification driven by metallic ions, elemental sulfur (S) and its compounds could generate harmful chemicals. On the other hand, hydrogenotrophic denitrification can remove nitrogen completely without generation of harmful chemicals, but requires specialized equipment for generation and handling of hydrogen gas (H2), which complicates process configuration. Bioelectrochemical processes are limited by low kinetics and complicated process configuration. In sum, anammox-mediated processes represent the best alternative to nitrification/denitrification for nitrogen removal in low- and high-strength wastewaters.

Nitrogen recovery from wastewater by microbial assimilation - A review

The increased nitrogen (N) input with low utilization rate in artificial N management has led to massive reactive N (Nr) flows, putting the Earth in a high-risk state. It is essential to recover and recycle Nr during or after Nr removal from wastewater to reduce N input while simultaneously mitigate Nr pollution in addressing the N stress. However, mechanisms for efficient Nr recovery during or after Nr removal remain unclear. Here, the occurrence of N risk and progress in wastewater treatment in recent years as well as challenges of the current technologies for N recovery from wastewater were reviewed. Through analyzing N conversion fluxes in biogeochemical N-cycling networks, microbial N assimilation through photosynthetic and heterotrophic microorganisms was highlighted as promising alternative for synergistic N removal and recovery in wastewater treatment. In addition, the prospects and gaps of Nr recovery from wastewater through microbial assimilation are discussed.

Algal biorefinery towards decarbonization: Economic and environmental consideration

Algae biomass contains various biological elements, including lipids, proteins, and carbohydrates, making it a viable feedstock for manufacturing biofuels. However, the biggest obstacle to commercializing algal biofuels is their high production costs, primarily related to an algae culture. The extraction of additional high value added bioproducts from algal biomass is thus required to increase the economic viability of producing algae biofuel. This study aims to discuss the economic benefits of a zero-carbon economy and an environmentally sustainable algae resource in decarbonizing the environment through the manufacture of algal-based biofuels from algae biomass for a range of potential uses. In addition, research on the algae biorefineries, with an emphasis on case studies for various cultivation methods, as well as the commercialization of biofuel and bioenergy. Overall, the algal biorefinery offers fresh potential for synthesizing various products.

Enhanced photoautotrophic growth of Chlorella vulgaris in starch wastewater through photo-regulation strategy

Microalgae biomass production with starch wastewater (SW) is a promising approach to realize waste recovery and cost reduction due to the inherent copious nutrients and nontoxic compounds in SW. However, the application of this technique is significantly hindered by low biomass production on account of the poor photosynthetic efficiency of microalgae. In this regard, we proposed a photo-regulation strategy characterized by the adjusting of numbers of light/dark (L/D) cycles, and compositions of light wavelength, which was proved to be an effective method for stimulating intracellular photo electron transfer and enhancing photosynthetic efficiency, to boost microalgae biomass accumulation. Additionally, responses of the microalgae photo-biochemical conversion, and the wastewater treatment performance at various number of L/D cycles and light wavelengths were discussed. The experimental results indicated that the biomass production increased when the L/D period was increased from 2 h:2 h-12 h:12 h. When the L/D period was 2 h:2 h, the biomass production reached a maximum value of 1.28 g L^-1, which was 19.6% higher than that of the control group when the L/D period was 12 h:12 h. Furthermore, with respect to microalgae growth under monochromatic light, the maximum biomass concentration (1.25 g L^-1) and lipid content (32.2%) of Chlorella were achieved under blue light; whereas, the minimum values were attained under red light (1.05 g L^-1 and 19.3%, respectively). When the red light and blue light were mixed and supplied, the microalgae biomass productivity was higher than that under white light, and the highest lipid productivity was 109.0 mg^-1 L^-1 d under a blue: red ratio of 2:1. Moreover, gas chromatography analysis demonstrated that the methyl in the range of C16-C18 in the system was higher than 70%. Fatty acid methyl esters (FAMEs) containing palmitic acid (C16:0) and oleic acid (C18:1) are beneficial for production of biodiesel, and the quality of fatty acid methyl ester used in biodiesel production can be improved using microalgae cultured under the mixed wavelengths of blue and red. Finally, Chlorella was cultured in PBR and reached the peak concentration of 2.45 g L^-1 by semi-continuous process with the HRT regulation.

Advances in the utilisation of carbon-neutral technologies for a sustainable tomorrow: A critical review and the path forward

Global industrialisation and overexploitation of fossil fuels significantly impact greenhouse gas emissions, resulting in global warming and other environmental problems. Hence, investigations on capturing, storing, and utilising atmospheric CO2 create novel technologies. Few microorganisms, microalgae, and macroalgae utilise atmospheric CO2 for their growth and reduce atmospheric CO2 levels. Activated carbon and biochar from biomasses also capture CO2. Nanomaterials such as metallic oxides, metal-organic frameworks, and MXenes illustrate outstanding adsorption characteristics, and convert CO2 to carbon-neutral fuels, creating a balance between CO2 production and elimination, thus zeroing the carbon footprint. The need for a paradigm shift from fossil fuels and promising technologies on renewable energies, carbon capture mechanisms, and carbon sequestration techniques that help reduce CO2 emissions for a better tomorrow are reviewed to achieve the world's sustainable development goals. The challenges and possible solutions with future perspectives are also discussed.

New concept of biodiesel production using food waste digestate powder: Co-culturing algae-activated sludge symbiotic system in low N and P paper mill wastewater

This paper aims to demonstrate an innovative process for the conversion of food waste digestate (FWD) powder into biofuel. The effects of different doses of FWD are investigated on microalgae-activated sludge (MAS) in treating pulp and paper mill wastewater (PPW) which generally contains insufficient nitrogen and phosphorus. FWD was added to adjust the initial N:P molar ratio in MAS at various levels (8:1 to 15:1). The highest Auxenochlorella protothecoides biomass achieved was 1.67 gL^-1 at a 13.45:1 N/P molar ratio of PPW. After 10 days of cultivation, Auxenochlorella protothecoides-activated sludge system removed 91.7 %, 74.6 %, and 91.5 % of total nitrogen, phosphorus, and sCOD respectively at D_0.836 gL^-1 DD. The highest lipid productivity was reported as 41.27 ± 2.43 mg L^-1 day^-1. Fatty acid methyl ester (FAME) analysis showed the presence of an appreciable percentage of balanced saturated and unsaturated fatty acids i.e. palmitic, oleic, and linoleic acid, rendering its potential as a feedstock for biodiesel production. Activated sludge induced flocculation of Auxenochlorella protothecoides was measured. The whole process establishes an effective means of circular economy, where the secondary source of recyclable nutrients i.e. FWD will be used as a source of N and P in PPW to obtain algal biodiesel from a negative value industrial wastewater.

Biological oxidation methods for the removal of organic and inorganic contaminants from wastewater: A comprehensive review

Enzyme-based bioremediation is a simple, cost-effective, and environmentally friendly method for isolating and removing a wide range of environmental pollutants. This study is a comprehensive review of recent studies on the oxidation of pollutants by biological oxidation methods, performed individually or in combination with other methods. The main bio-oxidants capable of removing all types of pollutants, such as organic and inorganic molecules, from fungi, bacteria, algae, and plants, and different types of enzymes, as well as the removal mechanisms, were investigated. The use of mediators and modification methods to improve the performance of microorganisms and their resistance under harsh real wastewater conditions was discussed, and numerous case studies were presented and compared. The advantages and disadvantages of conventional and novel immobilization methods, and the development of enzyme engineering to adjust the content and properties of the desired enzymes, were also explained. The optimal operating parameters such as temperature and pH, which usually lead to the best performance, were presented. A detailed overview of the different combination processes was also given, including bio-oxidation in coincident or consecutive combination with adsorption, advanced oxidation processes, and membrane separation. One of the most important issues that this study has addressed is the removal of both organic and inorganic contaminants, taking into account the actual wastewaters and the economic aspect.

Rhizopus oryzae fermentation wastewater nutrient removal coupling protein fodder production by employing Chlorella pyrenoidosa

The scenario was to investigate feasibilities of employing Chlorella pyrenoidosa for Rhizopus oryzae fermentation wastewater nutrient removal coupling protein fodder production. Results stated that TN, TP, NH₃-N, COD, BOD removal reached 99.79%, 94.70%, 98.80%, 97.60%, 99.60% to acquire discharge permit under fed-batch manipulation, whilst the peaked protein yield (19.94 g/L) was 6.04-fold more than batch manipulation. Rhizopus oryzae fermentation wastewater feeding C. pyrenoidosa was praised as high-quality protein not only with 26.78% essential amino acids and essential amino acids/nonessential amino acids value of 0.84 but also pathogenic bacteria and heavy metal loads complying with fodder standards. In vitro digestibility of dry matter, protein, lipid, and starch achieving 80.07%, 92.13%, 95.93%, 91.9% and bioavailability of polypeptides, triglycerides, free fatty acids, and oligosaccharides displaying 98.67%, 87.12%, 93.86%, 30.21%, which were roughly-equivalent to corn/soybean fodder. The findings formed exemplifications in utilizing other microalgal systems for wastewater nutrient removal coupling chemicals production.

Sustainable treatment of dye wastewater by recycling microalgal and diatom biogenic materials: Biorefinery perspectives

Discharge of untreated or partially treated toxic dyes containing wastewater from textile industries into water streams is hazardous for environment. The use of heavy metal(s) rich dyes, which are chemically active in azo and sulfur content(s) has been tremendously increasing in last two decades. Conventional physical and chemical treatment processes help to eliminate the dyes from textile wastewater but generates the secondary pollutants which create an additional environmental problem. Microalgae especially the diatoms are promising candidate for dye remediation from textile wastewater. Nanoporous diatoms frustules doped with nanocomposites increase the wastewater remediation efficiency due to their adsorption properties. On the other hand, microalgae with photosynthetic microbial fuel cell have shown significant results in being efficient, cost effective and suitable for large scale phycoremediation. This integrated system has also capability to enhance lipid and carotenoids biosynthesis in microalgae while simultaneously generating the bioelectricity. The present review highlights the textile industry wastewater treatment by live and dead diatoms as well as microalgae such as Chlorella, Scenedesmus, Desmodesmus sp. etc. This review engrosses applicability of diatoms and microalgae as an alternative way of conventional dye removal techniques with techno-economic aspects.

Heavy metal remediation from wastewater using microalgae: Recent advances and future trends

Microalgae-based wastewater treatment has previously been carried out in huge waste stabilization ponds. Microalgae, which can absorb carbon dioxide while reusing nutrients from sewage, has recently emerged as a new trend in the wastewater treatment business. Microalgae farming is thought to be a potential match for the modern world's energy strategy, which emphasizes low-cost and environmentally benign alternatives. Microalgae are being used to treat wastewater and make useful products. Microalgae, for example, is a promising renewable resource for producing biomass from wastewater nutrients because of its quick growth rate, short life span, and high carbon dioxide utilization efficacy. Microalgae-based bioremediation has grown in importance in the treatment of numerous types of wastewater in recent years. This solar-powered wastewater treatment technology has huge potential. However, there are still issues to be resolved in terms of land requirements, as well as the process's ecological feasibility and long-term viability, before these systems can be widely adopted. Due to cost and the need for a faultless downstream process, it is difficult to deploy this technology on a large scale. Other recent breakthroughs in wastewater microalgae farming have been investigated, such as how varied pressures affect microalgae growth and quality, as well as the number of high-value components produced. In this review, the future of this biotechnology has also been examined.

Nitrous oxide emission mitigation from biological wastewater treatment - A review

Nitrous oxide (N₂O) emitted from wastewater treatment processes has emerged as a focal point for academic and practical research amidst pressing environmental issues. This review presents an updated view on the biological pathways for N₂O production and consumption in addition to the critical process factors affecting N₂O emission. The current research trends including the strain and reactor aspects were then outlined with discussions. Last but not least, the research needs were proposed. The holistic life cycle assessment needs to be performed to evaluate the technical and economic feasibility of the proposed mitigation strategies or recovery options. This review also provides the background information for the proposed future research prospects on N₂O mitigation and recovery technologies. As pointed out, dilution effects of the produced N₂O gas product would hinder its use as renewable energy; instead, its use as an effective oxidizing agent is proposed as a promising recovery option.

Algae in wastewater treatment, mechanism, and application of biomass for production of value-added product

The pollutants can enter water bodies at various point and non-point sources, and wastewater discharge remains a major pathway. Wastewater treatment effectively reduces contaminants, it is expensive and requires an eco-friendly and sustainable alternative approach to reduce treatment costs. Algae have recently emerged as a potentially cost-effective method to remediate toxic pollutants through the mechanism of biosorption, bioaccumulation, and intracellular degradation. Hence, before discharging the wastewater into the natural environment better solutions for environmental resource recovery and sustainable developments can be applied. More importantly, algae are a potential feedstock material for various industrial applications such as biofuel production. Currently, researchers are developing algae as a source for pharmaceuticals, biofuels, food additives, and bio-fertilizers. This review mainly focused on the potential of algae and their specific mechanisms involved in wastewater treatment and energy recovery systems leading to important industrial precursors. The review is highly beneficial for scientists, wastewater treatment plant operators, freshwater managers, and industrial communities to support the sustainable development of natural resources.

Microalgae-bacteria consortium for wastewater treatment and biomass production

The diversity of microalgae and bacteria allows them to form a complementary consortium for efficient wastewater treatment and nutrient recovery. This review highlights the potential of wastewater-derived microalgal biomass as a renewable feedstock for producing animal feed, biofertilisers, biofuel, and many valuable biochemicals. Data corroborated from this review shows that microalgae and bacteria can thrive in many environments. Microalgae are especially effective at utilising nutrients from the water as they grow. This review also consolidates the current understanding of microalgae characteristics and their interactions with bacteria in a consortium system. Recent studies on the performance of only microalgae and microalgae-bacteria wastewater treatment are compared and discussed to establish a research roadmap for practical implementation of the consortium systems for various wastewaters (domestic, industrial, agro-industrial, and landfill leachate wastewater). In comparison to the pure microalgae system, the consortium system has a higher removal efficiency of up to 15% and shorter treatment time. Additionally, this review addresses a variety of possibilities for biomass application after wastewater treatment.

Microalgae-based wastewater treatment for developing economic and environmental sustainability: Current status and future prospects

Over the last several decades, concerns about climate change and pollution due to human activity has gained widespread attention. Microalgae have been proposed as a suitable biological platform to reduce carbon dioxide, a major greenhouse gas, while also creating commercial sources of high-value compounds such as medicines, cosmetics, food, feed, and biofuel. Industrialization of microalgae culture and valorization is still limited by significant challenges in scaling up the production processes due to economic constraints and productivity capacities. Therefore, a boost in resource usage efficiency is required. This enhancement not only lowers manufacturing costs but also enhancing the long-term viability of microalgae-based products. Using wastewater as a nutrient source is a great way to reduce manufacturing costs. Furthermore, water scarcity is one of the most important global challenges. In recent decades, industrialization, globalization, and population growth have all impacted freshwater resources. Moreover, high amounts of organic and inorganic toxins in the water due to the disposal of waste into rivers can have severe impacts on human and animal health. Microalgae cultures are a sustainable solution to tertiary and quaternary treatments since they have the ability to digest complex contaminants. This review presents biorefineries based on microalgae from all angles, including the potential for environmental pollution remediation as well as applications for bioenergy and value-added biomolecule production. An overview of current information about microalgae-based technology and a discussion of the associated hazards and opportunities for the bioeconomy are highlighted.

A techno-economic assessment of nutrient recovery from wastewater using microalgae: scenario in India collected from published literature

The true potential of the microalgae-based wastewater treatment (MWT) process is determined based on whether the process will provide a positive energy output and whether it is economically viable. The objectives of this study are dynamic modelling of microalgae growth based on initial wastewater concentration, temperature, solar radiation and a techno-economic assessment for an MWT scheme for application in a hot, dry climate. Through reference to relevant literature data on MWT in the Indian subcontinent, a selection of appropriate microalgal species Chlorella and Scenedesmus was made. The dynamic model developed was successfully calibrated and validated using independent experimental data collected from the published literature. Cost of production of bio-crude from microalgae grown in a hybrid photobioreactor and pond system in kitchen wastewater of Indian Institute of Technology, Hyderabad was calculated. A break-even selling price (BESP) of US$0.549/kg was obtained for the microalgae biomass. The cost of production of 1 L bio-crude was US$0.96 (Rs 69-74), which is comparable with crude oil cost. The model developed can be used by practising engineers to predict biomass growth and nutrient removal, thereby achieving a break-even point for cost efficiency.

Influence of C/N ratios on treatment performance and biomass production during co-culture of microalgae and activated sludge

Novel phycosphere associated bacteria processes are being regarded as a potential and cost-effective strategy for controlling anthropogenic contaminants in wastewater treatment. However, the underlying concern with the process is its vulnerability to improper organic or nutrient intake. This study established a synergistic interaction between microalgae and activated sludge in a three-photobioreactor system (without external aeration) to understand how pollutants could be mitigated whilst simultaneously yielding biomass under different C/N ratios of 1:1, 5:1 and 10:1. The result showed that the superior biomass productivity was facilitated at a C/N ratio of 5:1 (106 mg L^-1 d^-1), and the high degradation rate constants (k_COD = 0.25 d^-1, k_TN = 0.29 d^-1, k_TP = 0.35 d^-1) was approximated using a first-order kinetic model. The removal of pollutants was remarkably high, exceeding 90% (COD), 93% (TN), and 96% (TP). Nevertheless, the C/N ratio of 1:1 resulted in a threefold drop in biomass-specific growth rate (μ = 0.07 d^-1). Microalgal assimilation, followed by bacterial denitrification, is the major pathway of removing total nitrogen when the C/N ratio exceeds 5:1. Activated sludge plays an important role in improving microalgae tolerance to high concentration of ammonia nitrogen and boosting nitrification (light phase) and denitrification (dark phase). The use of phycosphere associated bacteria could be a promising strategy for controlling nutrients pollution and other environmental considerations in wastewater.

Profiling microalgal cultures growing on municipal wastewater and fertilizer media in raceway photobioreactors

Microalgae cultivation is proposed as an effective system for pathogens reduction and wastewater depuration, however, a full characterisation of the risks is still needed. Two raceways were inoculated with Scenedesmus, one using wastewater and the other using a fertilizer medium. Microbial community and pathogen presence were explored by next generation sequencing (NGS), commercial qPCR array and plate counts. These methods proved to be complementary for a full characterization of community structure and potential risks. Media and sampling locations contributed to shape communities and pathogenic loads. The main pathogenic genera detected were Arcobacter and Elizabethkingia (mainly in wastewater) with an important presence of Aeromonas (all samples). A lower presence of pathogens was detected in fertilizer samples, while wastewater showed a reduction from inlet to outlet. Raceways showed potential as an effective biotreatment, with most of the retained pathogens released in the outlet and only a minor part settled in the biomass.

Current perspective on wastewater treatment using photobioreactor for Tetraselmis sp.: an emerging and foreseeable sustainable approach

Urbanization is a revolutionary and necessary step for the development of nations. However, with development emanates its drawback i.e., generation of a huge amount of wastewater. The existence of diverse types of nutrient loads and toxic compounds in wastewater can reduce the pristine nature of the ecosystem and adversely affects human and animal health. The conventional treatment system reduces most of the chemical contaminants but their removal efficiency is low. Thus, microalgae-based biological wastewater treatment is a sustainable approach for the removal of nutrient loads from wastewater. Among various microalgae, Tetraselmis sp. is a robust strain that can remediate industrial, municipal, and animal-based wastewater and reduce significant amounts of nutrient loads and heavy metals. The produced biomass contains lipids, carbohydrates, and pigments. Among them, carbohydrates and lipids can be used as feedstock for the production of bioenergy products. Moreover, the usage of a photobioreactor (PBR) system improves biomass production and nutrient removal efficiency. Thus, the present review comprehensively discusses the latest studies on Tetraselmis sp. based wastewater treatment processes, focusing on the use of different bioreactor systems to improve pollutant removal efficiency. Moreover, the applications of Tetraselmis sp. biomass, advancement and research gap such as immobilized and co-cultivation have also been discussed. Furthermore, an insight into the harvesting of Tetraselmis biomass, effects of physiological, and nutritional parameters for their growth has also been provided. Thus, the present review will broaden the outlook and help to develop a sustainable and feasible approach for the restoration of the environment.

Freshwater Microalgae as Promising Food Sources: Nutritional and Functional Properties

A number of researchers have predicted that the current food crisis is predicted to worsen in 2050. The prediction of this crisis is aligned with climate change causing increases in some basic foodstuff prices. Therefore, everyone should prepare to consume alternative foods at an early stage. Alternative foods have been widely developed, one of which involves microalgae. However, the type of microalgae produced by some countries on a large scale consists of only oceanic/seawater microalgae. This will have an impact on and hinder development in countries that do not have these resources. Therefore, it is necessary to explore the use of microalgae derived from freshwater. Unfortunately, freshwater microalgae are still rarely investigated for use as alternative foods. However, there is considerable potential to utilize freshwater microalgae, and these algae are very abundant and diverse. In terms of nutritional properties, compared to oceanic / seawater microalgae, freshwater microalgae contain nearly the same protein and amino acids, lipids and fatty acids, carbohydrates, and vitamins. There are even more species whose composition is similar to those currently consumed foods, such as beef, chicken, beans, eggs, and corn. In addition to dietary properties, freshwater microalgae also have functional properties, due to the presence of pigments, sterols, fatty acids, and polyphenols. Given the potential of freshwater microalgae, these aquatic resources need to be developed for potential use as future food resources.

A critical review on diverse technologies for advanced wastewater treatment during SARS-CoV-2 pandemic: What do we know?

Advanced wastewater treatment technologies are effective methods and currently attract growing attention, especially in arid and semi-arid areas, for reusing water, reducing water pollution, and explicitly declining, inactivating, or removing SARS-CoV-2. Overall, removing organic matter and micropollutants prior to wastewater reuse is critical, considering that water reclamation can help provide a crop irrigation system and domestic purified water. Advanced wastewater treatment processes are highly recommended for contaminants such as monovalent ions from an abiotic source and SARS-CoV-2 from an abiotic source. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membranes, filtration, Ultraviolet (UV) irradiation, ozonation, chlorination, advanced oxidation processes, activated carbon (AC), and algae. Following that, an analysis of each process for organic matter removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, a comprehensive overview of recent advances and breakthroughs is provided for each technology. Finally, the advantages and disadvantages of each method are discussed.

Metal-Organic Frameworks for Wastewater Decontamination: Discovering Intellectual Structure and Research Trends

Due to their simple synthesis method and excellent properties, such as superior adsorption and regeneration capabilities, with a large surface area and tunable pores, metal-organic frameworks (MOFs) have emerged as a suitable option for wastewater treatment. Although an exponential growth in MOF literature has been observed in recent years, conducting a quantitative literature analysis of MOF application in wastewater treatment is a novelty. To fill this gap, a total of 1187 relevant publications were extracted from the Web of Science, published during the last 50 years, and analyzed using bibliometric and content analysis techniques. A bibliometric analysis was conducted to reveal growing publication trends, leading journals, prolific countries, and organizations; whereas, a content analysis was used to highlight key research themes and hot topics in this field. The analyses revealed that there is a strong international collaboration among authors, countries, and organizations. Chemical Engineering Journal, Journal of Hazardous Materials, and Journal of Environmental Chemical Engineering are the most prolific journals in this field. Furthermore, the use of MOFs for removing antibiotics from wastewater was identified as a recent hot topic. In addition, performance enhancements of MOFs, in terms of a higher adsorption capacity and water stability, were identified as topics of great interest. To cater to these issues, the application of graphene, graphene oxides, nanoparticles, and quantum dots was also observed in the research fronts in this field.

Exploring indigenous freshwater chlorophytes in integrated biophotovoltaic system for simultaneous wastewater treatment, heavy metal biosorption, CO2 biofixation and biodiesel generation

The study explored the combined photosynthetic activities of two green microalgal species, Tetradesmus obliquus and Tetradesmus reginae, on an integrated biophotovoltaic (BPV) platform for simultaneous wastewater treatment, toxic metal biosorption, carbon biofixation, bioelectricity generation and biodiesel production. The experimental setup comprised of a dual-chambered BPV with copper anode surrounded by T. obliquus in BG11 media, and copper cathode with T. reginae in municipal wastewater separated by Nafion 117 membrane. The study reported a maximum power density of 0.344 Wm^-2 at a cell potential of 0.415 V with external resistance of 1000 Ω and 0.3268 V maximum open-circuit voltage. The wastewater electrical conductivity and pH increased from 583 ± 22 to 2035 ± 29.31 mS/cm and 7.403 ± 0.174 to 8.263 ± 0.055 respectively, signifying increased photosynthetic and electrochemical activities. Residual nitrogen, phosphorus, chemical oxygen demand, arsenic, cadmium, chromium and lead removal efficiencies by T. reginae were 100%, 80.68%, 71.91%, 47.6%, 88.82%, 71.24% and 92.96%, respectively. T. reginae accumulated maximum biomass of 0.605 ± 0.033 g/L with a CO₂ biosequestration rate of 0.166 ± 0.010 gCO₂/L/day and 42.40 ± 1.166% lipid content. Methyl palmitate, methyl undecanoate and 13-octadecenoic acid with relative abundances of 37.24%, 24.80% and 12.02%, respectively were confirmed.

A Comprehensive Review on Forward Osmosis Water Treatment: Recent Advances and Prospects of Membranes and Draw Solutes

Forward osmosis (FO) is an evolving membrane separation technology for water treatment and reclamation. However, FO water treatment technology is limited by factors such as concentration polarization, membrane fouling, and reverse solute flux. Therefore, it is of a great importance to prepare an efficient high-density porous membrane and to select an appropriate draw solute to reduce concentration polarization, membrane fouling, and reverse solute flux. This review aims to present a thorough evaluation of the advancement of different draw solutes and membranes with their effects on FO performance. NaCl is still widely used in a large number of studies, and several general draw solutes, such as organic-based and inorganic-based, are selected based on their osmotic pressure and water solubility. The selection criteria for reusable solutes, such as heat-recovered gaseous draw, magnetic field-recovered MNPs, and electrically or thermally-responsive hydrogel are primarily based on their industrial efficiency and energy requirements. CA membranes are resistant to chlorine degradation and are hydrophilic, while TFC/TFN exhibit a high inhibition of bio-adhesion and hydrolysis. AQPs are emerging membranes, due to proteins with complete retention capacity. Moreover, the development of the hybrid system combining FO with other energy or water treatment technologies is crucial to the sustainability of FO.

Performance of an immobilized microalgae-based process for wastewater treatment and biomass production: Nutrients removal, lipid induction, microalgae harvesting and dewatering

Immobilized microalgae are good for wastewater treatment and biomass production. This study investigated treatment efficiency of a continuously operated system employing immobilized microalgae for secondary effluent of wastewater treatment plants, as well as the effectiveness on induction of valuable products, harvesting and dewatering of microalgae biomass. Under semi-continuous operation condition, microalgal dry weight increased 4.75 times within 2 d, associated with the highest removal rate of ammonia and phosphate at 28.95 mg/L·d and 4.83 mg/L·d, respectively. An immobilized microalgae membrane bioreactor (iMBR) was continuously operated for a month. The harvested immobilized microalgae beads were transferred to induction stage to obtain 4.5 times increase of lipid content per cell within 2 d. Immobilized microalgae performed 1.9 cm/s settling velocity and 97% water removal efficiency around 40 °C. A prospective integrated process on resource recovery and carbon neutrality was proposed for wastewater treatment, induction, harvesting and dewatering of immobilized microalgae cells.

Progress in microalgal mediated bioremediation systems for the removal of antibiotics and pharmaceuticals from wastewater

Worldwide demand for antibiotics and pharmaceutical products is continuously increasing for the control of disease and improvement of human health. Poor management and partial metabolism of these compounds result in the pollution of aquatic systems, leading to hazardous effects on flora, fauna, and ecosystems. In the past decade, the importance of microalgae in micropollutant removal has been widely reported. Microalgal systems are advantageous as their cultivation does not require additional nutrients: they can recover resources from wastewater and degrade antibiotics and pharmaceutical pollutants simultaneously. Bioadsorption, degradation, and accumulation are the main mechanisms involved in pollutant removal by microalgae. Integration of microalgae-mediated pollutant removal with other technologies, such as biodiesel, biochemical, and bioelectricity production, can make this technology more economical and efficient. This article summarizes the current scenario of antibiotic and pharmaceutical removal from wastewater using microalgae-mediated technologies.

Phosphorous removal and recovery from urban wastewater: Current practices and new directions

Phosphate rocks are an irreplaceable resource to produce fertilizers, but their availability will not be enough to meet the increasing demands of agriculture for food production. At the same time, the accumulation of phosphorous discharged by municipal wastewater treatment plants (WWTPs) is one of the main causes of eutrophication. In a perspective of circular economy, WWTPs play a key role in phosphorous management. Indeed, phosphorus removal and recovery from WWTPs can both reduce the occurrence of eutrophication and contribute to meeting the demand for phosphorus-based fertilizers. Phosphorous removal and recovery are interconnected phases in WWTP with the former generally involved in the mainstream treatment, while the latter on the side streams. Indeed, by reducing phosphorus concentration in the WWTP side streams, a further improvement of the overall phosphorus removal from the WWTP influent can be obtained. Many studies and patents have been recently focused on treatments and processes aimed at the removal and recovery of phosphorous from wastewater and sewage sludge. Notably, new advances on biological and material sciences are constantly put at the service of conventional or unconventional wastewater treatments to increase the phosphorous removal efficiency and/or reduce the treatment costs. Similarly, many studies have been devoted to the development of processes aimed at the recovery of phosphorus from wastewaters and sludge to produce fertilizers, and a wide range of recovery percentages is reported as a function of the different technologies applied (from 10-25% up to 70-90% of the phosphorous in the WWTP influent). In view of forthcoming and inevitable regulations on phosphorous removal and recovery from WWTP streams, this review summarizes the main recent advances in this field to provide the scientific and technical community with an updated and useful tool for choosing the best strategy to adopt during the design or upgrading of WWTPs.

Fungal Diversity in Two Wastewater Treatment Plants in North Italy

In urban wastewater treatment plants, bacteria lead the biological component of the depuration process, but the microbial community is also rich in fungi (mainly molds, yeasts and pseudo-yeasts), whose taxonomical diversity and relative frequency depend on several factors, e.g., quality of wastewater input, climate, seasonality, and depuration stage. By joining morphological and molecular identification, we investigated the fungal diversity in two different plants for the urban wastewater treatment in the suburbs of the two major cities in Lombardia, the core of industrial and commercial activities in Italy. This study presents a comparison of the fungal diversity across the depuration stages by applying the concepts of α-, β- and ζ-diversity. Eurotiales (mainly with Aspergillus and Penicillium), Trichosporonales (Trichosporon sensu lato), Saccharomycetales (mainly with Geotrichum) and Hypocreales (mainly with Fusarium and Trichoderma) are the most represented fungal orders and genera in all the stages and both the plants. The two plants show different trends in α-, β- and ζ-diversity, despite the fact that they all share a crash during the secondary sedimentation and turnover across the depuration stages. This study provides an insight on which taxa potentially contribute to each depuration stage and/or keep viable propagules in sludges after the collection from the external environment.

Effects of three surfactants on co-conversion of endogenous carbon and nitrogen of dairy wastewater in mesophilic hydrolytic acidification coupled microalgae culture system

To determine the feasibility of enhancing co-conversion of endogenous C and N in dairy wastewater by surfactants, the effects of varying dosages of sodium lignosulfonate (LS), sodium dodecyl sulfate (SDS), and Tween-80 on mesophilic hydrolytic acidification coupled microalgae culture system were investigated. Tween-80 had a positive effect on hydrolytic acidification, while LS had no clear effect and SDS had a negative effect. Tween-80 significantly increased the C/N ratio in hydrolytic acidification liquor (HAL) (maximum HAc/NH₄⁺-N rate reached 7.90 in 2.9% Tween-80 test). Pyrosequencing analysis demonstrated that community richness and diversity decreased and the proportion of acidobacteria increased with increasing Tween-80 dosage. Furthermore, the effect of Tween-80-enhanced HAL on microalgae (Chlorella pyrenoidosa) growth and nitrogen removal and the assimilation of C and N on the microalgae culture system were investigated. The biomass concentration and a C and N assimilation yield of 4.8% Tween-80 test (1.75 g/L, 825.01 mg/L, 126.68 mg/L) were significantly higher than those of both the low-concentration Tween-80 tests and control. The yield of protein and carbohydrates and higher heating value in the microalgae culture system were also promoted by Tween-80.

Chlamydomonas-Methylobacterium oryzae cooperation leads to increased biomass, nitrogen removal and hydrogen production

In the context of algal wastewater bioremediation, this study has identified a novel consortium formed by the bacterium Methylobacterium oryzae and the microalga Chlamydomonas reinhardtii that greatly increase biomass generation (1.22 g L^-1·d^-1), inorganic nitrogen removal (>99%), and hydrogen production (33 mL·L^-1) when incubated in media containing ethanol and methanol. The key metabolic aspect of this relationship relied on the bacterial oxidation of ethanol to acetate, which supported heterotrophic algal growth. However, in the bacterial monocultures the acetate accumulation inhibited bacterial growth. Moreover, in the absence of methanol, ethanol was an unsuitable carbon source and its incomplete oxidation to acetaldehyde had a toxic effect on both the alga and the bacterium. In cocultures, both alcohols were used as carbon sources by the bacteria, the inhibitory effects were overcome and both microorganisms mutually benefited. Potential biotechnological applications in wastewater treatment, biomass generation and hydrogen production are discussed.

Biomass production and phycoremediation of microalgae cultivated in polluted river water

The present study evaluated polluted river water as a medium for the growth of oleaginous microalgae under mixotrophic conditions. Microalgae grow in the medium and produce biomass, pigments, and lipids with the removal of pollution loads from wastewater. Selenastrum sp. SL7 produced maximum biomass and lipids of 660 mg L^-1 and 194.5 mg L^-1, respectively. Fatty acid profiling data showed that elevated saturated fatty acid production and major fatty acids found in lipid from these algae were palmitic acids, oleic acid, stearic acid, linolenic acid, and linoleic acid. The low percentage of polyunsaturated fatty acids of EPA was also detected. Water quality in terms of pH, DO, TDS, COD, and BOD was significantly improved. The use of this medium for microalgae cultivation not only improves the biomass and lipid yields but also serves as an excellent means of phycoremediation of pollutants in waste streams with value addition and environmental benefits.

An overview on microalgal-bacterial granular consortia for resource recovery and wastewater treatment

Excessive generation of wastewater is a matter of concern around the globe. Wastewater treatment utilizing a microalgae-mediated process is considered an eco-friendly and sustainable method of wastewater treatment. However, low biomass productivity, costly harvesting process, and energy extensive cultivation process are the major bottleneck. The use of the microalgal-bacteria granular consortia (MBGC) process is economic and requires less energy. For efficient utilization of MBGC, knowledge of its structure, composition and interaction are important. Various microscopic, molecular and metabolomics techniques play a significant role in understating consortia structure and interaction between partners. Microalgal-bacteria granular consortia structure is affected by various cultivation parameters like pH, temperature, light intensity, salinity, and the presence of other pollutants in wastewater. In this article, a critical evaluation of recent literature was carried out to develop an understanding related to interaction behavior that can help to engineer consortia having efficient nutrient removal capacity with reduced energy consumption.

Emerging biological wastewater treatment using microalgal-bacterial granules: A review

Aiming at deepening the understanding of the formation and evolution of emerging microalgal-bacterial granule (MBG)-based wastewater treatment systems, the recent advances regarding the formation processes, transfer phenomena, innovative bioreactors development and wastewater treatment performance of MBG-based systems are comprehensively reviewed in this work. Particularly, the successful establishments of MBG-based systems with various inocula are summarized. Besides, as the indispensable factors for biochemical reactions in MBGs, the light and substrates (organic matters, inorganic nutrients, etc) need to undergo complicated and multi-scale transfer processes before being assimilated by microorganisms within MBGs. Therefore, the involved transfer phenomena and mechanisms in MBG-based bioreactors are critically discussed. Subsequently, some recent advances of MBG-based bioreactors, the application of MBG-based systems in treating various synthetic and real wastewater, and the future development directions are discussed. In short, this review helps in promoting the development of MBG-based systems by presenting current research status and future perspectives.

Malaysian Virgin Soil Extracts as Natural Growth Enhancer for Targeted Green Microalgae Species

The microalgae-based industries are trending upwards, particularly as the feed ingredient for aquaculture. Therefore, a sustainable and reasonably priced source of nutrients to support the mass cultivation of microalgae is in great demand. The present study explored the feasibility of using extracts from virgin soil as natural growth-promoting nutrients for the cultivation of Nannochloropsis oculata, Nannochloropsis oceanica, and Chlorella sorokiniana. The extracts were obtained from Bera Lake Forest using five different treatment methods. The greatest retrieval of dissolved organic carbon, total dissolved nitrogen, and total dissolved phosphorus were observed with the autoclave treatment method at 121 °C twice, yielding a respective concentration of 336.56 mg/L, 13.40 mg/L, and 0.14 mg/L, respectively. The highest growth was recorded with Nannochloropsis oculata resulting in an optical density of 0.488 ± 0.009 (×103 cell mL−1), exhibiting 43% and 44% enhanced growth in comparison to Nannochloropsis oceanica and Chlorella sorokiniana, respectively. The specific growth rate (0.114 a ± 0.007 d−1) was the highest for Nannochloropsis oculata when the 24 h-extraction method was used, whereas the utilization of the autoclave 121 °C twice treatment method contributed to the highest specific growth of Nannochloropsis ocenica (0.069 a ± 0.003 d−1) and Chlorella sorokiniana (0.080 a ± 0.001 d−1). Collectively, these findings suggested that the addition of soil extracts which is sustainable and inexpensive promoted the growth of microalgae compared to the control system. A further study investigating the optimum culture conditions for enhanced microalgae growth will be carried out for the mass production of microalgae biomass.

Sustainable microalgal biomass production in food industry wastewater for low-cost biorefinery products: a review

Microalgae are recognized as cell factories enriched with biochemicals suitable as feedstock for bio-energy, food, feed, pharmaceuticals, and nutraceuticals applications. The industrial application of microalgae is challenging due to hurdles associated with mass cultivation and biomass recovery. The scale-up production of microalgal biomass in freshwater is not a sustainable solution due to the projected increase of freshwater demands in the coming years. Microalgae cultivation in wastewater is encouraged in recent years for sustainable bioeconomy from biorefinery processes. Wastewater from the food industry is a less-toxic growth medium for microalgal biomass production. Traditional wastewater treatment and management processes are expensive; hence it is highly relevant to use low-cost wastewater treatment processes with revenue generation through different products. Microalgae are accepted as potential biocatalysts for the bioremediation of wastewater. Microalgae based purification of wastewater technology could be a universal alternative solution for the recovery of resources from wastewater for low-cost biomass feedstock for industry. This review highlights the importance of microalgal biomass production in food processing wastewater, their characteristics, and different microalgal cultivation methods, followed by nutrient absorption mechanisms. Towards the end of the review, different microalgae biomass harvesting processes with biorefinery products, and void gaps that tend to hinder the biomass production with future perspectives will be intended. Thus, the review could claim to be valuable for sustainable microalgae biomass production for eco-friendly bioproduct conversions.

Graphical abstract

Integration of Waste to Bioenergy Conversion Systems: A Critical Review

Sustainable biofuel production is the most effective way to mitigate greenhouse gas emissions associated with fossil fuels while preserving food security and land use. In addition to producing bioenergy, waste biorefineries can be incorporated into the waste management system to solve the future challenges of waste disposal. Biomass waste, on the other hand, is regarded as a low-quality biorefinery feedstock with a wide range of compositions and seasonal variability. In light of these factors, biomass waste presents limitations on the conversion technologies available for value addition, and therefore more research is needed to enhance the profitability of waste biorefineries. Perhaps, to keep waste biorefineries economically and environmentally sustainable, bioprocesses need to be integrated to process a wide range of biomass resources and yield a diverse range of bioenergy products. To achieve optimal integration, the classification of biomass wastes to match the available bioprocesses is vital, as it minimizes unnecessary processes that may increase the production costs of the biorefinery. Based on biomass classification, this study discusses the suitability of the commonly used waste-to-energy conversion methods and the creation of integrated biorefineries. In this study, the integration of waste biorefineries is discussed through the integration of feedstocks, processes, platforms, and the symbiosis of wastes and byproducts. This review seeks to conceptualize a framework for identifying and integrating waste-to-energy technologies for the varioussets of biomass wastes.