Electrochemical Synthesis of Photoelectrodes and Catalysts for Use in Solar Water Splitting

Cu2O photocathodes with band-tail states assisted hole transport for standalone solar water splitting

Photoelectrochemical water splitting provides a promising solution for harvesting and storing solar energy. As the best-performing oxide photocathode, the Cu2O photocathode holds the performance rivaling that of many photovoltaic semiconductor-based photocathodes through continuous research and development. However, the state-of-the-art Cu2O photocathode employs gold as the back contact which can lead to considerable electron-hole recombination. Here, we present a Cu2O photocathode with overall improved performance, enabled by using solution-processed CuSCN as hole transport material. Two types of CuSCN with different structures are synthesized and carefully compared. Furthermore, detailed characterizations reveal that hole transport between Cu2O and CuSCN is assisted by band-tail states. Owing to the multiple advantages of applying CuSCN as the hole transport layer, a standalone solar water splitting tandem cell is built, delivering a solar-to-hydrogen efficiency of 4.55%. Finally, approaches towards more efficient dual-absorber tandems are discussed.

Advances of 2D bismuth in energy sciences

Since graphene has been successfully exfoliated, two-dimensional (2D) materials constitute a vibrant research field and open vast perspectives in high-performance applications. Among them, bismuthene and 2D bismuth (Bi) are unique with superior properties to fabricate state-of-the-art energy saving, storage and conversion devices. The largest experimentally determined bulk gap, even larger than those of stanene and antimonene, allows 2D Bi to be the most promising candidate to construct room-temperature topological insulators. Moreover, 2D Bi exhibits cyclability for high-performance sodium-ion batteries, and the enlarged surface together with the good electrochemical activity renders it an efficient electrocatalyst for energy conversion. Also, the air-stability of 2D Bi is better than that of silicene, germanene, phosphorene and arsenene, which could enable more practical applications. This review aims to thoroughly explore the fundamentals of 2D Bi and its improved fabrication methods, in order to further bridge gaps between theoretical predictions and experimental achievements in its energy-related applications. We begin with an introduction of the status of 2D Bi in the 2D-material family, which is followed by descriptions of its intrinsic properties along with various fabrication methods. The vast implications of 2D Bi for high-performance devices can be envisioned to add a new pillar in energy sciences. In addition, in the context of recent pioneering studies on moiré superlattices of other 2D materials, we hope that the improved manipulation techniques of bismuthene, along with its unique properties, might even enable 2D Bi to play an important role in future energy-related twistronics.

Nature-inspired electrocatalysts and devices for energy conversion

A NICE approach for the design of nature-inspired electrocatalysts and electrochemical devices for energy conversion.

Photoelectrochemistry of manganese oxide/mixed phase titanium oxide heterojunction

Photoelectrochemistry of manganese oxide/mixed phase titanium oxide was studied.

Atomic order, electronic structure and thermodynamic stability of nickel aluminate

The atomic order, electronic structure and thermodynamic stability of nickel aluminate, NiAl2O4, have been analyzed using periodic density functional theory and cluster expansion. NiAl2O4 forms a tetragonal structure with P4122 space group. At temperatures below 800 K, it is an inverse spinel, with Ni occupying the octahedral sites and Al occupying both the octahedral and the tetrahedral sites. Some Niocta + Altetra ⇌ Nitetra + Alocta exchange occurs above 800 K, but the structure remains largely inverse at high temperatures, with about 95% Niocta at 1500 K. Various functionals, with and without van der Waals corrections, were used to predict the experimental formation energy, lattice parameters and electronic structure. In all cases, the NiAl2O4 is found to be ferromagnetic and a semiconductor with an indirect band gap along the Γ → M symmetry points. NiAl2O4 is found to be thermodynamically stable at operating conditions of 900-1000 K and 1 atm relative to its competing oxide phases, NiO and Al2O3.

Water Oxidation Catalysts for Artificial Photosynthesis

Water oxidation is the primary reaction of both natural and artificial photosynthesis. Developing active and robust water oxidation catalysts (WOCs) is the key to constructing efficient artificial photosynthesis systems, but it is still facing enormous challenges in both fundamental and applied aspects. Here, the recent developments in molecular catalysts and heterogeneous nanoparticle catalysts are reviewed with special emphasis on biomimetic catalysts and the integration of WOCs into artificial photosystems. The highly efficient artificial photosynthesis depends largely on active WOCs integrated into light harvesting materials via rational interface engineering based on in-depth understanding of charge dynamics and the reaction mechanism.

Recent Progress and Approaches on Carbon-Free Energy from Water Splitting

Sunlight is the most abundant renewable energy resource, providing the earth with enough power that is capable of taking care of all of humanity's desires-a hundred times over. However, as it is at times diffuse and intermittent, it raises issues concerning how best to reap this energy and store it for times when the Sun is not shining. With increasing population in the world and modern economic development, there will be an additional increase in energy demand. Devices that use daylight to separate water into individual chemical elements may well be the answer to this issue, as water splitting produces an ideal fuel. If such devices that generate fuel were to become widely adopted, they must be low in cost, both for supplying and operation. Therefore, it is essential to research for cheap technologies for water ripping. This review summarizes the progress made toward such development, the open challenges existing, and the approaches undertaken to generate carbon-free energy through water splitting.

Electrodeposition at Highly Negative Potentials of an Iron-Cobalt Oxide Catalyst for Use in Electrochemical Water Splitting

Earth-abundant transition metal-based catalysts have been extensively investigated for their applicability in water electrolysers to enable overall water splitting to produce clean hydrogen and oxygen. In this study a Fe-Co based catalyst is electrodeposited in 30 seconds under vigorous hydrogen evolution conditions to produce a high surface area material that is active for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). This catalyst can achieve high current densities of 600 mAcm^-2 at an applied potential of 1.6 V (vs RHE) in 1 M NaOH with a Tafel slope value of 48 mV dec^-1 for the OER. In addition, the HER can be facilitated at current densities as high as 400 mA cm^-2 due to the large surface area of the material. The materials were found to be predominantly amorphous but did contain crystalline regions of CoFe₂ O₄ which became more evident after the OER indicating interesting compositional and structural changes that occur to the catalyst after an electrocatalytic reaction. This rapid method of creating a bimetallic oxide electrode for both the HER and OER could possibly be adopted to other bimetallic oxide systems suitable for electrochemical water splitting.

Spectroelectrochemical study of water oxidation on nickel and iron oxyhydroxide electrocatalysts

Ni/Fe oxyhydroxides are the best performing Earth-abundant electrocatalysts for water oxidation. However, the origin of their remarkable performance is not well understood. Herein, we employ spectroelectrochemical techniques to analyse the kinetics of water oxidation on a series of Ni/Fe oxyhydroxide films: FeOOH, FeOOHNiOOH, and Ni(Fe)OOH (5% Fe). The concentrations and reaction rates of the oxidised states accumulated during catalysis are determined. Ni(Fe)OOH is found to exhibit the fastest reaction kinetics but accumulates fewer states, resulting in a similar performance to FeOOHNiOOH. The later catalytic onset in FeOOH is attributed to an anodic shift in the accumulation of oxidised states. Rate law analyses reveal that the rate limiting step for each catalyst involves the accumulation of four oxidised states, Ni-centred for Ni(Fe)OOH but Fe-centred for FeOOH and FeOOHNiOOH. We conclude by highlighting the importance of equilibria between these accumulated species and reactive intermediates in determining the activity of these materials.

Polypyrrole coated niobium disulfide nanowires as high performance electrocatalysts for hydrogen evolution reaction

Developing an environmentally friendly and low-cost approach to improve electrocatalytic activity for hydrogen evolution reaction (HER) has drawn wide attention due to its significant value and challenge. NbS₂-based materials exhibit high performance catalytic activity in electrochemical area, but its poor stability and synthetic difficulty limits its development and application. This work reports on the enhancement of HER performance through the utilization of conductive polymer polypyrrole (Ppy) on NbS₂ nanowires as electrocatalysts, which can be easily prepared. The Ppy coated NbS₂ nanowires obtain excellent catalytic activity for HER with low onset potential (-56 mV) and much lower overpotential (-219 mV) at a current of -10 mA cm^-2 compared with bare NbS₂ nanowires.

Current progress in developing metal oxide nanoarrays-based photoanodes for photoelectrochemical water splitting

Solar energy driven photoelectrochemical (PEC) water splitting is a clean and powerful approach for renewable hydrogen production. The design and construction of metal oxide based nanoarray photoanodes is one of the promising strategies to make the continuous breakthroughs in solar to hydrogen conversion efficiency of PEC cells owing to their owned several advantages including enhanced reactive surface at the electrode/electrolyte interface, improved light absorption capability, increased charge separation efficiency and direct electron transport pathways. In this Review, we first introduce the structure, work principle and their relevant efficiency calculations of a PEC cell. We then give a summary of the state-of the-art research in the preparation strategies and growth mechanism for the metal oxide based nanoarrays, and some details about the performances of metal oxide based nanoarray photoanodes for PEC water splitting. Finally, we discuss key aspects which should be addressed in continued work on realizing high-efficiency metal oxide based nanoarray photoanodes for PEC solar water splitting systems.

Interfacing Epitaxial Dinickel Phosphide to 2D Nickel Thiophosphate Nanosheets for Boosting Electrocatalytic Water Splitting

Heterostructures with abundant phase boundaries are compelling for surface-mediated electrochemical applications. However, rational design of such bifunctional electrocatalysts for efficient hydrogen and oxygen evolution reactions (HER and OER) is still challenging. Here, due to the well-matched lattice parameters, we easily achieved the epitaxy of two-dimensional ternary nickel thiophosphate (NiPS₃) nanosheets with in-grown dinickel phosphide (Ni₂P) through an in situ growth strategy. Density functional theory calculations reveal that the NiPS₃/Ni₂P heterojunction significantly decreases the kinetic barrier for hydrogen adsorption and accelerates electron transfer due to the built-in electric field at the epitaxial interfaces. The significantly improved electrocatalytic performance is shown to be closely related to the epitaxial interfacial area rather than the amount of secondary phase. Notably, the resultant NiPS₃/Ni₂P heterostructures enable an overall water splitting electrolyzer to achieve 50 mA cm^-2 at a lower bias of 1.65 V compared to that for the pristine NiPS₃ alone (2.02 V) and even the benchmark Pt/C//IrO₂ electrocatalysts (1.69 V).

An anion exchange reaction: an effective approach to prepare alloyed Co-Fe bimetallic disulfide for improving the electrocatalytic activity

A mild anion exchange approach is proposed for the synthesis of alloyed Co-Fe bimetallic disulfide. Abundant structural disorders and tunable compositions are effectively induced by the anion exchange process. The alloyed Co-Fe bimetallic disulfide exhibits a low overpotential of 205 mV to reach a current density of 100 mA cm-2 in an acidic electrolyte, which is significantly improved compared to the performance of individual disulfide. It is believed that this work paves a new strategy for the synthesis of bimetallic compounds and highlights the importance of tuning the catalyst composition for achieving high catalytic performance.

Elaborately Modified BiVO4 Photoanodes for Solar Water Splitting

Photoelectrochemical (PEC) cells for solar-energy conversion have received immense interest as a promising technology for renewable hydrogen production. Their similarity to natural photosynthesis, utilizing sunlight and water, has provoked intense research for over half a century. Among many potential photocatalysts, BiVO₄ , with a bandgap of 2.4-2.5 eV, has emerged as a highly promising photoanode material with a good chemical stability, environmental inertness, and low cost. Unfortunately, its charge transport properties are modest, at most a hole diffusion length (L_p ) of ≈70 nm. However, recent rapid developments in multiple modification strategies have elevated it to a position as the most promising metal oxide photoanode material. This review summarizes developments in BiVO₄ photoanodes in the past 10 years, in which time it has continuously broken its own performance records for PEC water oxidation. Effective modification techniques are discussed, including synthesis of nanostructures/nanopores, external/internal doping, heterojunction fabrication, surface passivation, and cocatalysts. Tandem systems for unassisted solar water splitting and PEC production of value-added chemicals are also discussed.

Toward practical solar hydrogen production - an artificial photosynthetic leaf-to-farm challenge

Solar water splitting is a promising approach to transform sunlight into renewable, sustainable and green hydrogen energy. There are three representative ways of transforming solar radiation into molecular hydrogen, which are the photocatalytic (PC), photoelectrochemical (PEC), and photovoltaic-electrolysis (PV-EC) routes. Having the future perspective of green hydrogen economy in mind, this review article discusses devices and systems for solar-to-hydrogen production including comparison of the above solar water splitting systems. The focus is placed on a critical assessment of the key components needed to scale up PEC water splitting systems such as materials efficiency, cost, elemental abundancy, stability, fuel separation, device operability, cell architecture, and techno-economic aspects of the systems. The review follows a stepwise approach and provides (i) a summary of the basic principles and photocatalytic materials employed for PEC water splitting, (ii) an extensive discussion of technologies, procedures, and system designs, and (iii) an introduction to international demonstration projects, and the development of benchmarked devices and large-scale prototype systems. The task of scaling up of laboratory overall water splitting devices to practical systems may be called "an artificial photosynthetic leaf-to-farm challenge".

Thin film photoelectrodes for solar water splitting

Photoelectrochemical (PEC) water splitting has been intensively studied in the past decades as a promising method for large-scale solar energy storage. Among the various issues that limit the progress of this field, the lack of photoelectrode materials with suitable properties in all aspects of light absorption, charge separation and transport, and charge transfer is a key challenge, which has attracted tremendous research attention. A large variety of compositions, in different forms, have been tested. This review aims to summarize efforts in this area, with a focus on materials-related considerations. Issues discussed by this review include synthesis, optoelectronic properties, charge behaviors and catalysis. In the recognition that thin-film materials are representative model systems for the study of these issues, we elected to focus on this form, so as to provide a concise and coherent account on the different strategies that have been proposed and tested. Because practical implementation is of paramount importance to the eventual realization of using solar fuel for solar energy storage, we pay particular attention to strategies proposed to address the stability and catalytic issues, which are two key factors limiting the implementation of efficient photoelectrode materials. To keep the overall discussion focused, all discussions were presented within the context of water splitting reactions. How the thin-film systems may be applied for fundamental studies of the water splitting chemical mechanisms and how to use the model system to test device engineering design strategies are discussed.

Enhancing Electrocatalytic Water Splitting by Strain Engineering

Electrochemical water splitting driven by sustainable energy such as solar, wind, and tide is attracting ever-increasing attention for sustainable production of clean hydrogen fuel from water. Leveraging these advances requires efficient and earth-abundant electrocatalysts to accelerate the kinetically sluggish hydrogen and oxygen evolution reactions (HER and OER). A large number of advanced water-splitting electrocatalysts have been developed through recent understanding of the electrochemical nature and engineering approaches. Specifically, strain engineering offers a novel route to promote the electrocatalytic HER/OER performances for efficient water splitting. Herein, the recent theoretical and experimental progress on applying strain to enhance heterogeneous electrocatalysts for both HER and OER are reviewed and future opportunities are discussed. A brief introduction of the fundamentals of water-splitting reactions, and the rationalization for utilizing mechanical strain to tune an electrocatalyst is given, followed by a discussion of the recent advances on strain-promoted HER and OER, with special emphasis given to combined theoretical and experimental approaches for determining the optimal straining effect for water electrolysis, along with experimental approaches for creating and characterizing strain in nanocatalysts, particularly emerging 2D nanomaterials. Finally, a vision for a future sustainable hydrogen fuel community based on strain-promoted water electrolysis is proposed.

Surface-Controlled Photocatalysis and Chemical Sensing of TiO2, α-Fe2O3, and Cu2O Nanocrystals

A relatively new approach to the design of photocatalytic and gas sensing materials is to use the shape-controlled nanocrystals with well-defined facets exposed to light or gas molecules. An abrupt increase in a number of papers on the synthesis and characterization of metal oxide semiconductors such as a TiO2, α-Fe2O3, Cu2O of low-dimensionality, applied to surface-controlled photocatalysis and gas sensing, has been recently observed. The aim of this paper is to review the work performed in this field of research. Here, the focus is on the mechanism and processes that affect the growth of nanocrystals, their morphological, electrical, and optical properties and finally their photocatalytic as well as gas sensing performance.

Crystal Facet Engineering of Photoelectrodes for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising approach for solar-driven hydrogen production with zero emissions, and it has been intensively studied over the past decades. However, the solar-to-hydrogen (STH) efficiencies of the current PEC systems are still far from the 10% target needed for practical application. The development of efficient photoelectrodes in PEC systems holds the key to achieving high STH efficiencies. In recent years, crystal facet engineering has emerged as an important strategy in designing efficient photoelectrodes for PEC water splitting, which has yet to be comprehensively reviewed and is the main focus of this article. After the Introduction, the second section of this review concisely introduces the mechanisms of crystal facet engineering. The subsequent section provides a snapshot of the unique facet-dependent properties of some semiconductor crystals including surface electronic structures, redox reaction sites, surface built-in electric fields, molecular adsorption, photoreaction activity, photocorrosion resistance, and electrical conductivity. Then, the methods for fabricating photoelectrodes with faceted semiconductor crystals are reviewed, with a focus on the preparation processes. In addition, the notable advantages of the crystal facet engineering of photoelectrodes in terms of light harvesting, charge separation and transfer, and surface reactions are critically discussed. This is followed by a systematic overview of the modification strategies of faceted photoelectrodes to further enhance the PEC performance. The last section summarizes the major challenges and some invigorating perspectives for future research on crystal facet engineered photoelectrodes, which are believed to play a vital role in promoting the development of this important research field.

Carbon-Based Photocathode Materials for Solar Hydrogen Production

Hydrogen is considered a promising environmentally friendly energy carrier for replacing traditional fossil fuels. In this context, photoelectrochemical cells effectively convert solar energy directly to H₂ fuel by water photoelectrolysis, thereby monolitically combining the functions of both light harvesting and electrolysis. In such devices, photocathodes and photoanodes carry out the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), respectively. Here, the focus is on photocathodes for HER, traditionally based on metal oxides, III-V group and II-VI group semiconductors, silicon, and copper-based chalcogenides as photoactive material. Recently, carbon-based materials have emerged as reliable alternatives to the aforementioned materials. A perspective on carbon-based photocathodes is provided here, critically analyzing recent research progress and outlining the major guidelines for the development of efficient and stable photocathode architectures. In particular, the functional role of charge-selective and protective layers, which enhance both the efficiency and the durability of the photocathodes, is discussed. An in-depth evaluation of the state-of-the-art fabrication of photocathodes through scalable, high-troughput, cost-effective methods is presented. The major aspects on the development of light-trapping nanostructured architectures are also addressed. Finally, the key challenges on future research directions in terms of potential performance and manufacturability of photocathodes are analyzed.

Rationally Designed Copper-Modified Polymeric Carbon Nitride as a Photocathode for Solar Water Splitting

Polymeric carbon nitride has been considered to be an active photocathode for catalyzing the generation of H₂ through water splitting. However, the application of this material in photoelectrochemical cells remains a challenge owing to the intrinsically sluggish kinetics of charge separation. Herein, a facile salt-melt method is developed for fabricating Cu-modified polymeric carbon nitride as an effective photocathode material for solar water splitting. Various characterization data confirm that Cu-modified polymeric carbon nitride contains both free CuCl, derived from precursors, and coordinated Cu species incorporated into the polymeric carbon nitride, which can generate type-II heterojunctions. This special heterojunction energy structure contributes to a significantly enhanced photocurrent density for hydrogen evolution. The proposed strategy for synthesizing the Cu-modified polymeric carbon nitride can stimulate research for the development of highly efficient visible-light-active photocathodes.

Silicon based photoelectrodes for photoelectrochemical water splitting

Solar water splitting using Si photoelectrodes in photoelectrochemical (PEC) cells offers a promising approach to convert sunlight into sustainable hydrogen energy, which has recently received intense research. This review summarizes the recent advances in the development of efficient and stable Si photoelectrodes for solar water splitting. The definition and representation of efficiency and stability for Si photoelectrodes are firstly introduced. We then present several basic strategies for designing highly efficient and stable Si photoelectrodes, including surface textures, protective layer, catalyst loading and the integration of the system. Finally, we highlight the progress that has been made in Si photocathodes and Si photoanodes, respectively, with emphasis on how to integrate Si with protective layer and catalyst.

Formation of high-density CuBi2O4 thin film photocathodes with polyvinylpyrrolidone-metal interaction

We present a polymer-assisted spin coating process used to fabricate high-density p-type CuBi₂O₄ (CBO) thin films. Polyvinylpyrrolidone (PVP) is introduced in the precursor solutions in order to promote uniform nucleation of CBO and prevent formation of the secondary phase, such as Bi₂O_3, by Bi³⁺ ion hydrolysis. Slow PVP molecule decomposition during the two-step annealing process, with a 1 M/0.5 M (Bi³⁺/Cu²⁺) metal ion concentration, enables optimum contact at the CBO/substrate interface by avoiding formation of voids. This resulted in the formation of non-porous, compact CBO thin films. The highest current density of the photoelectrochemical (PEC) oxygen reduction reaction is obtained with non-porous, compact CBO thin films due to unimpeded charge transport through the CBO bulk, as well as across the interface. When combined with silicon, the high-density CBO thin film investigated in this work is expected to provide new PEC tandem cell options to use for solar applications.

In situ growth of α-Fe2O3@Co3O4 core-shell wormlike nanoarrays for a highly efficient photoelectrochemical water oxidation reaction

Photoelectrochemical (PEC) water splitting represents a promising strategy to convert solar energy into chemical energy in the form of hydrogen, but its performance is severely limited by the sluggish water oxidation reaction. Herein, for the first time, we report the direct assembly of an ultrathin, uniform, and dense layer of Co3O4 on wormlike nanostructured hematite (WN-α-Fe2O3) to form a large-area and high-density WN-α-Fe2O3@Co3O4 core-shell nanoarray via in situ hydrothermal growth followed by calcination, in which the electrostatic force between WN-α-Fe2O3 and the reactants, pH- and temperature-controlled structures of WN-α-Fe2O3, and ultralow nucleation rate of Co3O4 precursors all play critical roles. The obtained heteronanostructure array shows a photocurrent density of 3.48 mA cm-2, which is 4.05 times higher than that of pristine WN-α-Fe2O3 (0.86 mA cm-2), an onset potential of ∼0.62 V, 60 mV lower than that of α-Fe2O3 (∼0.68 V), and a photoconversion efficiency of 0.55%, 3.93 times higher than that of WN-α-Fe2O3 (0.14%). This is among the highest performances reported for Fe2O3-based photoanodes for water splitting. It is discovered that the Co3O4 shells can significantly enhance the charge separation, accelerate the charge transport and transfer, and reduce the charge transfer resistance from the photoelectrode to the electrolyte for a fast water oxidation reaction, thereby greatly promoting the PEC water oxidation performance of pristine WN-α-Fe2O3. This work not only creates a novel low-cost and Earth-abundant WN-α-Fe2O3@Co3O4 photoelectrode with superior PEC water oxidation performance and provides scientific insights into the enhancement mechanism, but also offers a general strategy for the in situ growth of water oxidation catalysts on various photoelectrodes with 3-D complex geometries for PEC water splitting.

A simple, facile and low-cost method for the preparation of mixed-phase titanium oxide: toward efficient photoelectrochemical water oxidation

A new, low-cost and facile procedure for the preparation of a titanium oxide photocatalyst on a titanium electrode through simple high-voltage anodization is reported.

Immobilization of a molecular cobalt cubane catalyst on porous BiVO4via electrochemical polymerization for efficient and stable photoelectrochemical water oxidation

A cobalt cubane catalyst was immobilized onto a BiVO₄ electrode via electrochemical polymerization to fabricate hybrid photoanodes for stable photoelectrochemical water oxidation.

Self-supported Al-doped cobalt phosphide nanosheets grown on three-dimensional Ni foam for highly efficient water reduction and oxidation

Al-doped CoP nanosheets self-supported on Ni foam are shown to be an efficient bifunctional electrocatalyst for long-time overall water splitting.

Remote ion-pair interactions in Fe-porphyrin-based molecular catalysts for the hydrogen evolution reaction

The influence of ion-pair interactions between carboxy-containing iron porphyrins and the proton source in the hydrogen evolution reaction is described.

Enhancing photoelectrochemical hydrogen production of a n+p-Si hetero-junction photocathode with amorphous Ni and Ti layers

N⁺p-Si/Ti/Ni hetero-junction photocathode with high-quality interfaces and light-harvesting capability shows the outstanding PEC-HER performance in alkaline electrolyte.

Photodeposition of a conformal metal oxide nanocoating

A variety of conformal metal oxide nanocoatings including Cr₂O₃, Al₂O₃, ZnO, and In₂O₃ can be accessed via simple photodeposition.

Single-Crystal Growth and Characterization of the Chalcopyrite Semiconductor CuInTe2 for Photoelectrochemical Solar Fuel Production

Transition-metal chalcogenides are a promising family of materials for applications as photocathodes in photoelectrochemical (PEC) H₂ generation. A long-standing challenge for chalcopyrite semiconductors is characterizing their electronic structure, both experimentally and theoretically, because of their relatively high-energy band gaps and spin-orbit coupling (SOC), respectively. In this work, we present single crystals of CuInTe₂, whose relatively small optically measured band gap of 0.9 ± 0.03 eV enables electronic structure characterization by angle-resolved photoelectron spectroscopy (ARPES) in conjunction with first-principles calculations incorporating SOC. ARPES measurements reveal bands that are steeply dispersed in energy with a band velocity of 2.5-5.4 × 10⁵ m/s, almost 50% of the extremely conductive material graphene. Additionally, CuInTe₂ single crystals are fabricated into electrodes to experimentally determine the valence band edge energy and confirm the thermodynamic suitability of CuInTe₂ for water redox chemistry. The electronic structure characterization and band edge position presented in this work provide kinetic and thermodynamic factors that support CuInTe₂ as a strong candidate for water reduction.

Inorganic semiconductor biointerfaces

Biological systems respond to and communicate through biophysical cues, such as electrical, thermal, mechanical and topographical signals. However, precise tools for introducing localized physical stimuli and/or for sensing biological responses to biophysical signals with high spatiotemporal resolution are limited. Inorganic semiconductors display many relevant electrical and optical properties, and they can be fabricated into a broad spectrum of electronic and photonic devices. Inorganic semiconductor devices enable the formation of functional interfaces with biological material, ranging from proteins to whole organs. In this Review, we discuss fundamental semiconductor physics and operation principles, with a focus on their behaviour in physiological conditions, and highlight the advantages of inorganic semiconductors for the establishment of biointerfaces. We examine semiconductor device design and synthesis and discuss typical signal transduction mechanisms at bioelectronic and biophotonic interfaces for electronic and optoelectronic sensing, optoelectronic and photothermal stimulation and photoluminescent in vivo imaging of cells and tissues. Finally, we evaluate cytotoxicity and highlight possible new material components and biological targets of inorganic semiconductor devices.