Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications

Upcycling Food By-products: Characteristics and Applications of Nanocellulose

Rising global food prices and the increasing prevalence of food insecurity highlight the imprudence of food waste and the inefficiencies of the current food system. Upcycling food by-products holds significant potential for mitigating food loss and waste within the food supply chain. Food by-products can be utilized to extract nanocellulose, a material that has obtained substantial attention recently due to its renewability, biocompatibility, bioavailability, and a multitude of remarkable properties. Cellulose nanomaterials have been the subject of extensive research and have shown promise across a wide array of applications, including the food industry. Notably, nanocellulose possesses unique attributes such as a surface area, aspect ratio, rheological behavior, water absorption capabilities, crystallinity, surface modification, as well as low possibilities of cytotoxicity and genotoxicity. These qualities make nanocellulose suitable for diverse applications spanning the realms of food production, biomedicine, packaging, and beyond. This review aims to provide an overview of the outcomes and potential applications of cellulose nanomaterials derived from food by-products. Nanocellulose can be produced through both top-down and bottom-up approaches, yielding various types of nanocellulose. Each of these variants possesses distinctive characteristics that have the potential to significantly enhance multiple sectors within the commercial market.

Biodegradable cellulose/curcumin films with Janus structure for food packaging and freshness monitoring

The development of renewable, hydrophobic, and biodegradable intelligent packaging materials as an alternative to petroleum-based plastic products has become a new research focus in recent years, but remains a challenge. Herein, regenerated cellulose/curcumin composite films were fabricated by dispersing hydrophobic curcumin uniformly in a hydrophilic cellulose matrix using an aqueous alkali/urea solvent based on the pH-driven principle of curcumin. In addition, a unilateral hydrophobic modification was carried out using chemical vapor deposition of methyltrichlorosilane to obtain Janus structure. The composite films exhibited high transparency in the visible light spectrum, excellent antioxidation, thermal stability, mechanical strength, gas barrier properties, and antibacterial activity. Furthermore, the films demonstrated the capability to lower the overall levels of volatile basic nitrogen in stored fish. The color of the films shifted from a pale yellow to a reddish-brown over time during storage. The composite films can be completely degraded after approximately 98 days in soil with an average environmental temperature of 29 °C. This work provided a facile strategy to prepare biodegradable cellulose/curcumin films with Janus structure as packaging materials which could preserve the freshness of food products while offering visual monitor of their freshness in real-time.

Rheology of cellulose nanocrystal and nanofibril suspensions

Nanocellulose is a sustainable nanomaterial and a versatile green platform that has attracted increasing attention. Although the wide applications of its aqueous suspensions are closely related to rheology, comprehensive studies of their rheological behavior, especially the yielding behavior, are still limited. Herein, to investigate the relationship between structure and rheological properties, the viscoelasticity, thixotropy and yielding behavior of two commonly used nanocelluloses, rod-shaped cellulose nanocrystals (CNCs) and filamentous cellulose nanofibrils (CNFs), were systematically investigated. The viscosity, viscoelasticity and thixotropic behavior of the suspensions were analyzed by steady-state shear, frequency sweep, creep-recovery, hysteresis loop, and three-interval thixotropic recovery tests. The yielding behaviors were evaluated through creep, steady-state shear, step shear rate, stress ramps, amplitude sweep, and large amplitude oscillatory shear tests. The rheological properties of the two typical suspensions showed a strong dependence on concentration and time. However, compared to CNC suspensions, CNF suspensions exhibited stronger thixotropy and higher yield stress due to the higher aspect ratio of CNF and the stronger structural skeleton of the suspensions as supported by Simha's equation and micromorphology analysis. This work provides a theoretical rheology basis for the practical applications of nanocellulose suspensions in various fields.

Nanoparticulated WO3/NiWO4 Using Cellulose as a Template and Its Application as an Auxiliary Co-Catalyst to Pt for Ethanol and Glycerol Electro-Oxidation

This work reports the use of cellulose as a template to prepare nanosized WO3 or NiWO4 and its application as a co-catalyst in the electro-oxidation of ethanol and glycerol. Microcrystalline cellulose was hydrolyzed with phosphotungstic acid (H3PW12O40) to prepare the nanocrystalline cellulose template. The latter was air-calcinated to remove the template and obtain nanometric WO3. Tungsten oxide was impregnated with Ni(NO3)2, which was subsequently air-calcinated to obtain the nanometric NiWO4. Elemental analysis confirmed the coexistence of nickel and tungsten, whereas thermal analysis evidenced a high thermal stability for these materials. The X-ray diffractograms displayed crystal facets of WO3 and, when Ni(II) was added, NiWO4. The transmission electron micrographs corroborated the formation of nanosized particles with average particle sizes in the range of 30 to 50 nm. Finally, to apply this material, Pt/WO3-C and Pt/WO3-NiWO4-C were prepared and used in ethanol and glycerol electro-oxidation in an alkaline medium, observing a promotional effect of the oxide and tungstate by reducing the onset potential and increasing the current density. These materials show great potential to produce clean electricity or green hydrogen, contributing to energetic transition.

Extraction of cellulose nanocrystalline from Camellia oleifera Abel waste shell: Study of critical processes, properties and enhanced emulsion performance

Cellulose nanocrystals (CNCs) extracted from the waste shell of Camellia oleifera Abel (C. oleifera) are gaining attention as valuable materials. In this study, CNCs were extracted from the agricultural waste shell of C. oleifera through phosphoric acid and sulfuric acid hydrolysis, respectively. Firstly, we optimized the alkaline treatment process for cellulose isolation by using response surface methodology. Furthermore, the properties of CNCs were investigated by neutralizing them with NaOH and NH3·H2O, and by dialysis in water. In addition, the characterization methods including FT-IR, TGA, AFM and TEM were used to analysis the properties of the synthesized CNCs. Finally, CNCs were studied for their application in essential oil-based Pickering emulsions. CNCs obtained from sulfuric acid showed the smallest particle size and good dispersibility. Moreover, the release profiles of essential oils in the emulsions were followed by Peppa's kinetic release model. The antibacterial activity of the emulsions against E. coli and S. aureus showed that CNCs-stabilized emulsions enhanced the antibacterial activity of essential oils. Therefore, neutralization treatments may enhance the properties of CNCs, and CNCs stabilized Pickering emulsions can enhance antibacterial activity of essential oil. This study provides insight into the potential application of CNCs derived from C. oleifera waste shells.

Smart antibacterial nanocellulose packaging film based on pH-stimulate responsive microcapsules synthesized by Pickering emulsion template

Spoilage results in food waste and endangers consumer health, and the smart antibacterial packaging can effectively inhibit bacterial growth and reduce food spoilage. In this study, the smart antibacterial nanocellulose packaging films were developed by adding the pH-stimulated responsive microcapsules into cellulose nanofibril (CNF) film-forming. The microcapsules were synthesized by interfacial polymerization of Pickering emulsion. Carboxylated cellulose nanocrystals as solid particles stabilized the composited oil phase to prepare the oil-in-water Pickering emulsion. The emulsion with the particle concentration of 1.25 wt% and the oil phase mass fraction of 7.5 % processes excellent stability and uniform particle size, was chosen to synthesize microcapsules. The cinnamaldehyde in the film with the addition amount of microcapsules 0.6 g burst released in the first 1 h and then slowly, and the cumulative release at pH 2.0, 4.0, 5.5 and 7.2 was 28.43 μg/cm2, 18.84 μg/cm2, 16.52 μg/cm2 and 12.89 μg/cm2, respectively. The inhibitory rate of film against both E. coli and L. monocytogenes reached 99 % at pH 4.0. The shelf life of pork packed by the film prolonged to nearly 9 d at room temperature. The developed films have the potential to be used in food packaging.

Recent Advances in the Development of Sustainable Composite Materials used as Membranes in Microbial Fuel Cells

MFC can have dual functions; they can generate electricity from industrial and domestic effluents while purifying wastewater. Most MFC designs comprise a membrane which physically separates the cathode and anode compartments while keeping them electrically connected, playing a significant role in its efficiency. Popular commercial membranes such as Nafion, Hyflon and Zifron have excellent ionic conductivity, but have several drawbacks, mainly their prohibitive cost and non-biodegradability, preventing the large-scale application of MFC. Fabrication of composite materials that can function better at a much lower cost while also being environment-friendly has been the endeavor of few researchers over the past years. The current review aims to apprise readers of the latest trends of the past decade in fabricating composite membranes (CM) for MFC. For emphasis on environmental-friendly CM, the review begins with biopolymers, moving on to the carbon-polymer, polymer-polymer, and metal-polymer CM. Lastly, critical analysis towards technology-oriented propositions and realistic future directives in terms of strengths, weakness, opportunities, challenges (SWOC analysis) of the application of CM in MFC have been discussed for their possible large-scale use. The focus of this review is the development of hybrid materials as membranes for fuel cells, while underscoring the need for environment-friendly composites and processes.

Non-cytotoxic, highly functionalized cellulose nanocrystals with high crystallinity and thermal stability derived from a novel agromass of Elettaria cardamomum, using a soft and benign mild oxalic acid hydrolysis

Non-cytotoxic, highly crystalline, and functionalized, thermally stable cellulose nanocrystals are extracted from the stems of Elettaria cardamom, a novel underutilised agromass, by employing a neat green, mild oxalic acid hydrolysis. The protocol involves a chemo-mechanical strategy of coupling hydrolysis with steam explosion and homogenization. The obtained CNC showed a crystallinity index of 81.51 %, an aspect ratio of 17.80 ± 1.03 and a high degradation temperature of about 339.07 °C. The extraction procedure imparted a high negative surface functionalization with a zeta potential value of -34.244 ± 0.496 mV and a polydispersity of 16.5 %. The CNC had no antibacterial activity, according to non-cytotoxic experiments conducted on four bacterial strains. This supports the notion of "One Health" in the context of AMR by demonstrating the safety of antibiotic resistance due to consistent exposure upon environmental disposal. The as-extracted nanocellulose crystals can be a potential candidate for commercial application in wide and diversified disciplines like food packaging, anti-infective surfaces for medical devices, biosensors, bioelectronics etc.

Force-Induced Alignment of Nanofibrillated Bacterial Cellulose for the Enhancement of Cellulose Composite Macrofibers

Bacterial cellulose, as an important renewable bioresource, exhibits excellent mechanical properties along with intrinsic biodegradability. It is expected to replace non-degradable plastics and reduce severe environmental pollution. In this study, using dry jet-wet spinning and stretching methods, we fabricate cellulose composite macrofibers using nanofibrillated bacterial cellulose (BCNFs) which were obtained by agitated fermentation. Ionic liquid (IL) was used as a solvent to perform wet spinning. In this process, force-induced alignment of BCNFs was applied to enhance the mechanical properties of the macrofibers. The results of scanning electron microscopy revealed the well-aligned structure of BCNF along the fiber axis. The fiber prepared with an extrusion rate of 30 m min-1 and a stretching ratio of 46% exhibited a strength of 174 MPa and a Young's modulus of 13.7 GPa. In addition, we investigated the co-spinning of carboxymethyl cellulose-containing BCNF with chitosan using IL as a "container", which indicated the compatibility of BCNFs with other polysaccharides. Recycling of the ionic liquid was also verified to validate the sustainability of our strategy. This study provides a scalable method to fabricate bacterial cellulose composite fibers, which can be applied in the textile or biomaterial industries with further functionalization.

Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications

Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.

Nanostructured Cellulose-Based Aerogels: Influence of Chemical/Mechanical Cascade Processes on Quality Index for Benchmarking Dye Pollutant Adsorbents in Wastewater Treatment

(1) Background: Nanostructured cellulose has emerged as an efficient bio-adsorbent aerogel material, offering biocompatibility and renewable sourcing advantages. This study focuses on isolating (ligno)cellulose nanofibers ((L)CNFs) from barley straw and producing aerogels to develop sustainable and highly efficient decontamination systems. (2) Methods: (Ligno)cellulose pulp has been isolated from barley straw through a pulping process, and was subsequently deconstructed into nanofibers employing various pre-treatment methods (TEMPO-mediated oxidation process or PFI beater mechanical treatment) followed by the high-pressure homogenization (HPH) process. (3) Results: The aerogels made by (L)CNFs, with a higher crystallinity degree, larger aspect ratio, lower shrinkage rate, and higher Young's modulus than cellulose aerogels, successfully adsorb and remove organic dye pollutants from wastewater. (L)CNF-based aerogels, with a quality index (determined using four characterization parameters) above 70%, exhibited outstanding contaminant removal capacity over 80%. The high specific surface area of nanocellulose isolated using the TEMPO oxidation process significantly enhanced the affinity and interactions between hydroxyl and carboxyl groups of nanofibers and cationic groups of contaminants. The efficacy in adsorbing cationic dyes in wastewater onto the aerogels was verified by the Langmuir adsorption isotherm model. (4) Conclusions: This study offers insights into designing and applying advanced (L)CNF-based aerogels as efficient wastewater decontamination and environmental remediation platforms.

Mechanistic insight into homogeneous catalytic crosslinking behavior between cellulose and epoxide by explicit solvent models

Inspired by recent advances on functional modification of cellulosic materials, the crosslinking behaviors of epoxide with cellulose under the catalysis of different homogeneous catalysts including H2O, Brønsted acid, Brønsted base, Lewis acid and neutral salt were systematically investigated using density functional theory (DFT) methods with hybrid micro-solvation-continuum approach. The results showed that catalytic activity, reaction mechanism and regioselectivity are determined by the combined effect of catalyst type, electronic effect and steric hindrance. All the homogeneous catalysts have catalytic activity for the crosslinking reaction, which decreases in the order of NaOH > HCl > NCl3 > MCl2 > CH3COOH > NaCl (N = Fe3+, Al3+; M = Zn2+, Ca2+). Upon the catalysis of NaOH, hydroxyl group of cellulose is firstly deprotonated to form a carbanion-like intermediate which will further attack the less sterically hindered C atom of epoxide showing excellent regioselectivity. Acidic catalysts readily cause epoxide protonated, which suffers from nucleophilic attack of cellulose and forms the carbocation-like intermediate. Brønsted acid exhibits poor regioselectivity, however, Lewis acid shows an interesting balance between catalytic activity and regioselectivity for the crosslinking reaction, which may be attributed to the unique catalysis and stabilization effects of its coordinated H2O on the transition state structure.

TEMPO oxidized cellulose nanocrystal (TOCNC) scaffolded nanoscale zero-valent iron (nZVI) for enhanced chromium removal

The conventional carboxymethyl cellulose (CMC) stabilization hampered available active sites of adsorption and reduction, due to irregular shape of nanoscale zero-valent iron (nZVI) particles with augmented average size and passivated surface, leading to insufficient removal and poor resistance against complex environmental conditions. Herein, we presented (2,2,6,6-Tetramethylpiperidine-1-oxyl)-mediated (TEMPO-mediated) oxidation of cellulose nanocrystal (TOCNC) scaffolded nZVI (nZVI@TOCNC) with enhanced efficiency for chromium removal in comparison with CMC stabilized nZVI (nZVI@CMC). The anchoring of nZVI at the functional sites of TOCNC was initiated by liquid-phase chemical reduction method. The nZVI@TOCNC showed improved nZVI distribution with uniform particle size and thinner shell (∼1 nm). Characterizations using FT-IR, XPS and XRD demonstrated that bindings between TOCNC and nZVI were through hydrogen bonds, electrostatic attractions, coordination-covalent bonds and bidentate chelation. TOCNC with shorter branch-chain (-COC-) surrounding the nZVI could potentially form a porous and compact "mesh" to rigidly encapsulate nZVI, while CMC wrapped around nZVI in the way of traditional polymeric stabilizers. Thus, 0.5 g/L nZVI@TOCNC achieved 99.96% Cr (Ⅵ) removal efficiency (20 mg/L) at pH = 7 and the removal capacity were up to 55.86 mg/g. The nZVI@TOCNC consistently presented higher removal efficiency than nZVI@CMC under wide pH range (3-7). Cr (Ⅵ) was reduced to Cr (Ⅲ) by nZVI@TOCNC with deposition of CrxFe1-x (OH)3 and Cr2O3. The predominant mechanisms of removal probably consisted of electrostatic attractions, reduction, co-precipitation and surface complexation. The pseudo-second-order kinetic model well-fitted the sorption kinetic, indicating TOCNC scaffold stabilized nZVI for efficient reduction of Cr (Ⅵ) through multi-layer adsorption. As a template and delivery carrier, TOCNC shows promising potential to further improve the capability and practice of nZVI for in situ treatment of industrial waste water with heavy metal pollution.

Bionanocomposites with Enhanced Physical Properties from Curli Amyloid Assemblies and Cellulose Nanofibrils

Proteinaceous amyloid fibrils are one of the stiffest biopolymers due to their extensive cross-β-sheet quaternary structure, whereas cellulose nanofibrils (CNFs) exhibit interesting properties associated with their nanoscale size, morphology, large surface area, and biodegradability. Herein, CNFs were supplemented with amyloid fibrils assembled from the Curli-specific gene A (CsgA) protein, the main component of bacterial biofilms. The resulting composites showed superior mechanical properties, up to a 7-fold increase compared to unmodified CNF films. Wettability and thermogravimetric analyses demonstrated high surface hydrophobicity and robust thermal tolerance. Bulk spectroscopic characterization of CNF-CsgA films revealed key insights into the molecular organization within the bionanocomposites. Atomic force microscopy and photoinduced force microscopy revealed the high-resolution location of curli assemblies into the CNF films. This novel sustainable and cost-effective CNF-based bionanocomposites supplemented with intertwined bacterial amyloid fibrils opens novel directions for environmentally friendly applications demanding high mechanical, water-repelling properties, and thermal resistance.

Cellulose Dissolution, Modification, and the Derived Hydrogel: A Review

The cellulose-based hydrogel has occupied a pivotal position in almost all walks of life. However, the native cellulose can not be directly used for preparing hydrogel due to the complex non-covalent interactions. Some literature has discussed the dissolution and modification of cellulose but has yet to address the influence of the pretreatment on the as-prepared hydrogels. Firstly, the "touching" of cellulose by derived and non-derived solvents was introduced, namely, the dissolution of cellulose. Secondly, the "conversion" of functional groups on the cellulose surface by special routes, which is the modification of cellulose. The above-mentioned two parts were intended to explain the changes in physicochemical properties of cellulose by these routes and their influences on the subsequent hydrogel preparation. Finally, the "reinforcement" of cellulose-based hydrogels by physical and chemical techniques was summarized, viz., improving the mechanical properties of cellulose-based hydrogels and the changes in the multi-level structure of the interior of cellulose-based hydrogels.

Up to Date Review of Nature-Inspired Superhydrophobic Textiles: Fabrication and Applications

In recent years, with the rapid development of the economy and great progress in science and technology, people have become increasingly concerned about their quality of life and physical health. In order to pursue a higher life, various functional and biomimetic textiles have emerged one after another and have been sought after by people. There are many animal and plant surfaces with special wettability in nature, and their unique "micro-nano structures" and low surface energy have attracted extensive attention from researchers. Researchers have prepared various textiles with superhydrophobic features by mimicking these unique structures. This review introduces the typical organisms with superhydrophobicity in nature, using lotus, water strider, and cicada as examples, and describes their morphological features and excellent superhydrophobicity. The theoretical model, commonly used raw materials, and modification technology of superhydrophobic surfaces are analyzed. In addition, the application areas and the current study status of superhydrophobic surfaces for textiles are also summarized. Finally, the development prospects for superhydrophobic textiles based on bionic technology are discussed.

Nanocellulose-based porous materials: Regulation and pathway to commercialization in regenerative medicine

We review the recent progress that have led to the development of porous materials based on cellulose nanostructures found in plants and other resources. In light of the properties that emerge from the chemistry, shape and structural control, we discuss some of the most promising uses of a plant-based material, nanocellulose, in regenerative medicine. Following a brief discussion about the fundamental aspects of self-assembly of nanocellulose precursors, we review the key strategies needed for material synthesis and to adjust the architecture of the materials (using three-dimensional printing, freeze-casted porous materials, and electrospinning) according to their uses in tissue engineering, artificial organs, controlled drug delivery and wound healing systems, among others. For this purpose, we map the structure-property-function relationships of nanocellulose-based porous materials and examine the course of actions that are required to translate innovation from the laboratory to industry. Such efforts require attention to regulatory aspects and market pull. Finally, the key challenges and opportunities in this nascent field are critically reviewed.

In situ capping of silver nanoparticles with cellulosic matrices from wheat straws in enhancing their antimicrobial activity: Synthesis and characterization

Silver nanoparticles have gained worldwide attention in the scientific community due to their high antimicrobial activity. However, they tend to agglomerate and lose their shape and properties, thus capping agents necessary to protect their shapes, sizes, and properties. To enhance their antimicrobial activity, this research aimed to cap silver nanoparticles with cellulosic matrices from wheat straws. The wheat straw was delignified with 6% HNO3, and the residual was treated with 1% NaOH and NaClO: CH3COOH (1:1), then used to synthesize cellulose nanocrystals via acid hydrolysis. AgNPs were incorporated into the CPC and CNCs by in-situ synthesis using NaHB4 as the reducing agent. Fourier Transform Infrared, Scanning Electron Microscopy, and X-ray diffraction were used to investigate their features. The findings exhibited crystallinity increased with subsequent treatments, according to XRD analysis. Ultraviolet-visible, FTIR, TEM, and XRD analysis confirmed the capping of AgNPs onto the cellulosic materials. Antibacterial activity against Staphylococcus aureus and Escherichia coli, with CNCs-AgNPs composite, exhibited higher activity compared to CPC-AgNPs composite due to the increased surface area and excellent binding on the surface of the composite.

Symbiotic Antimicrobial Effects of Cellulose-Based Bio-Nanocomposite for Disease Management of Agricultural Crops

In the present work, a bionanocomposite for plant crop protection was prepared by non-toxic biocompatible & biodegradable nanomaterials (Cellulose & TiO2 ) to utilize its synergistic effects against antimicrobial pathogens. The commercially available microcrystalline cellulose has been reduced to a nanometric scale regime using acid hydrolysis, while the standard TiO2 nano-powder of particle size ~20 nm has been used to prepare their nanocomposite (NC). The antibacterial studies via agar well diffusion method demonstrated that after 72 h of incubation, parent nanomaterials Ncell and TiO2 were not showing any activity against phytopathogens X. campestris pv. campestris, and Clavibacter while the nanocomposite's NC's were still effective depicting both bacteriostatic and bactericidal actions. However, the bacterial growth of biocontrol P. fluorescence was not affected by Ncell, TiO2 NPs and NC after 72 h of incubation. The antifungal testing results via poison food agar assay method suggest that the nanocomposite, along with Ncell and TiO2 NPs, exhibited strong inhibition of fungal growth of Phytophthora Spp at 0.125 mg/ml concentration while for F. graminearum, similar effect was observed at 0.25 mg/ml concentration. The nanocomposite has proved its potential by exhibiting longer & stronger synergistic effects against plant pathogens as a good antimicrobial agent for protection of agricultural crops.

Graft onto approaches for nanocellulose-based advanced functional materials

The resurgence of cellulose as nano-dimensional 'nanocellulose' has unlocked a sustainable bioeconomy for the development of advanced functional biomaterials. Bestowed with multifunctional attributes, such as renewability and abundance of its source, biodegradability, biocompatibility, superior mechanical, optical, and rheological properties, tunable self-assembly and surface chemistry, nanocellulose presents exclusive opportunities for a wide range of novel applications. However, to alleviate its intrinsic hydrophilicity-related constraints surface functionalization is inevitably needed to foster various targeted applications. The abundant surface hydroxyl groups on nanocellulose offer opportunities for grafting small molecules or macromolecular entities using either a 'graft onto' or 'graft from' approach, resulting in materials with distinctive functionalities. Most of the reviews published to date extensively discussed 'graft from' modification approaches, however 'graft onto' approaches are not well discussed. Hence, this review aims to provide a comprehensive summary of 'graft onto' approaches. Furthermore, insight into some of the recently emerging applications of this grafted nanocellulose including advanced nanocomposite formulation, stimuli-responsive materials, bioimaging, sensing, biomedicine, packaging, and wastewater treatment has also been reviewed.

Visualizing Chiral Interactions in Carbohydrates Adsorbed on Au(111) by High-Resolution STM Imaging

Carbohydrates are the most abundant organic material on Earth and the structural "material of choice" in many living systems. Nevertheless, design and engineering of synthetic carbohydrate materials presently lag behind that for protein and nucleic acids. Bottom-up engineering of carbohydrate materials demands an atomic-level understanding of their molecular structures and interactions in condensed phases. Here, high-resolution scanning tunneling microscopy (STM) is used to visualize at submolecular resolution the three-dimensional structure of cellulose oligomers assembled on Au(1111) and the interactions that drive their assembly. The STM imaging, supported by ab initio calculations, reveals the orientation of all glycosidic bonds and pyranose rings in the oligomers, as well as details of intermolecular interactions between the oligomers. By comparing the assembly of D- and L-oligomers, these interactions are shown to be enantioselective, capable of driving spontaneous enantioseparation of cellulose chains from its unnatural enantiomer and promoting the formation of engineered carbohydrate assemblies in the condensed phases.

Bioinspired, Robust, and Absorbable Cellulose Nanofibrils/Chitosan Filament with Remarkable Cytocompatibility and Wound Healing Properties

Surgical threads are of great importance to prevent wound infection and accelerate tissue healing in surgical treatment. Cellulose nanofibrils (CNF) and chitosan (CS) are attracting increasing attention to be employed as biomedicine materials due to their nontoxicity, cytocompatibility, and biodegradability. However, a robust and absorbable cellulose-based surgical thread has not been explored. Therefore, in this work, a bioinspired CNF/CS composite thread containing 5% cationic polyacrylamide (CPAM) by the mass of CS was prepared, and the obtained CNF/CS-5C thread exhibited excellent mechanical properties and low swelling ratio in water due to the high cross-link degree. Especially, the tensile strength (1877 ± 107 MPa) of this thread was much higher than that of most reported CNF-based threads. Meanwhile, compared with commercial silk and Vicryl surgical threads, the CNF/CS-5C thread exhibited better in vitro cytocompatibility toward endothelial and fibroblast cells and lower inflammatory response in vivo to subcutaneous tissues of rats. In addition, the obtained thread could be regarded as a promising absorbable suture, which exhibited excellent wound healing performances in vivo. Therefore, the prepared absorbable thread will open a new window to prepare novel and advanced cellulose-based threads for medical applications.

Effect of Surface Functionality on the Rheological and Self-Assembly Properties of Chitin and Chitosan Nanocrystals and Use in Biopolymer Films

Chitin nanocrystals (ChNCs) are unique to all other bio-derived nanomaterials in one aspect: the inherent presence of a nitrogen moiety. By tuning the chemical functionality of this nanomaterial, and thus its charge and hydrogen bonding capacity, one can heavily impact its macroscopic properties such as its rheological and self-assembly characteristics. In this study, two types of ChNCs are made using acid hydrolysis (AH-ChNCs) and oxidative (OX-ChNCs) pathways, unto which deacetylation using a solvent-free procedure is utilized to create chitosan nanocrystals (ChsNCs) of varying degree of deacetylation (DDA). These nanocrystals were then studied for their rheological behavior and liquid crystalline ordering. It was found that with both deacetylation and carboxylation of ChNCs, viscosity continually increased with increasing concentrations from 2 to 8 wt %, contrary to AH-ChNC dispersions in the same range. Interestingly, increasing the amine content of ChNCs was not proportional to the storage modulus, where a peak saturation of amines provided the most stiffness. Conversely, while the introduction of carboxylation increased the elastic modulus of OX-ChNCs by an order of magnitude from that of AH-ChNCs, it was decreased by increasing DDA. Deacetylation and carboxylation both inhibited the formation of a chiral nematic phase. Finally, these series of nanocrystals were incorporated into biodegradable pectin-alginate films as a physical reinforcement, which showed increased tensile strength and Young's modulus values for the films incorporated with ChsNCs. Overall, this study is the first to investigate how surface functionalization of chitin-derived nanocrystals can affect their rheological and liquid crystalline properties and how it augments pectin/alginate films as a physical reinforcement nanofiller.

Surface-Modified Carboxylated Cellulose Nanofiber Hydrogels for Prolonged Release of Polyhexamethylene Biguanide Hydrochloride (PHMB) for Antimicrobial Applications

The surface modification of cellulose nanofibers (CNFs) using a 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)/sodium bromide (NaBr)/sodium hypochlorite (NaClO) system was successful in improving their hydrophilicity. Following that, we fabricated hydrogels containing carboxylated cellulose nanofibers (c-CNFs) and loaded them with polyhexamethylene biguanide (PHMB) using a physical crosslinking method, aiming for efficient antimicrobial uses. The morphological and physicochemical properties of all hydrogel formulations were characterized, and the results revealed that the 7% c-CNFs-2 h loaded with PHMB formulation exhibited desirable characteristics such as regular shape, high porosity, good mechanical properties, suitable gel content, and a good maximum swelling degree. The successful integration of PHMB into the c-CNF matrix was confirmed by FTIR analysis. Furthermore, the 7% c-CNFs-2 h loaded with the PHMB formulation demonstrated PHMB contents exceeding 80% and exhibited a prolonged drug release pattern for up to 3 days. Moreover, this formulation displayed antibacterial activity against S. aureus and P. aeruginosa. In conclusion, the novel approach of c-CNF hydrogels loaded with PHMB through physical crosslinking shows promise as a potential system for prolonged drug release in topical drug delivery while also exhibiting excellent antibacterial activity.

Stabilization of Beeswax-In-Water Dispersions Using Anionic Cellulose Nanofibers and Their Application in Paper Coating

Beeswax is a bio-sourced, renewable, and even edible material that stands as a convincing option to provide paper-based food packaging with moisture resistance. Nonetheless, the difficulty of dispersing it in water limits its applicability. This work uses oxidized, negatively charged cellulose nanofibers along with glycerol to stabilize beeswax-in-water emulsions above the melting point of the wax. The synergistic effects of nanocellulose and glycerol granted the stability of the dispersion even when it cooled down, but only if the concentration of nanofibers was high enough. This required concentration (0.6-0.9 wt%) depended on the degree of oxidation of the cellulose nanofibers. Rheological hindrance was essential to prevent the buoyancy of beeswax particles, while the presence of glycerol prevented excessive aggregation. The mixtures had yield stress and showed pseudoplastic behavior at a high enough shear rate, with their apparent viscosity being positively influenced by the surface charge density of the nanofibers. When applied to packaging paper, the nanocellulose-stabilized beeswax suspensions not only enhanced its barrier properties towards liquid water (reaching a contact angle of 96°) and water vapor (<100 g m-2 d-1), but also to grease (Kit rating: 5) and airflow (>1400 Gurley s). While falling short of polyethylene-coated paper, this overall improvement, attained using only one layer of a biobased coating suspension, should be understood as a step towards replacing synthetic waxes and plastic laminates.

Properties and antimicrobial activity of wheat-straw nanocellulose-arabinoxylan acetate composite films incorporated with silver nanoparticles

In the current study, the novel eco-friendly and biodegradable nanocomposite films (NC-AXAc) were prepared from wheat-straw NC and AXAc with improved functional properties. NC derived from wheat-straw cellulose has a fibre-like structure with mean-particle size in the 340-520 nm range. AX derived AXAc was prepared with Degree of Substitution (DS) in the range of 1.85-1.89. Furthermore, to enhance antimicrobial properties, AgNPs were prepared via the reduction method using NaBH4 and added into the concentration of 4 × 10-4M into the emulsion forming composite films. The silver nanoparticles (AgNPs) incorporated in the composite exhibited an average size of 40-70 nm and a surface plasmon resonance (SPR) absorption peak at 395 nm. The high-resolution XPS spectrum of the Ag element showed that the two peaks at around 374.2 eV (Ag3d3/2) and 368.2 eV (Ag3d5/2) clearly revealed the metallic Ag existence in composite films. SEM analysis revealed the coarse and heterogeneous morphology of AgNPs incorporated films. The AgNPs incorporated composites exhibited good mechanical, thermal stability, and antimicrobial activity. The results suggested that AgNPs incorporated NC-AXAc composites could be used as a potential biodegradable antimicrobial nanocomposite in active food packaging systems for shelf-life extension of perishable commodities.

Facile production of cellulose nanofibers from raw elephant grass by an aluminum chloride-enhanced acidic deep eutectic solvent

To develop a greener and more efficient method for producing cellulose nanofibers (CNFs) from raw plants, an AlCl3-enhanced ternary deep eutectic solvent, DES2 (consisting of choline chloride, citric acid, and AlCl3·6H2O in a molar ratio of 1:0.4:0.08), was synthesized. Raw elephant grass (EG) was pretreated with DES2, followed by sodium chlorite (NaClO2) bleaching and ultrasonic disruption to extract high-performance CNFs. The DES2 and NaClO2 treatments effectively removed hemicellulose and lignin, achieving removal rates of 99.23 % and 99.62 %, respectively, while maintaining a cellulose content of 78.3 %. DES2 demonstrated easy recyclability and maintained excellent biomass pretreatment performance even after multiple cycles. Following a brief 30-min intermittent ultrasound treatment, the resulting CNFs demonstrated superior crystallinity, increased carboxyl content, and a narrower width distribution compared to CNFs obtained from AlCl3-free DES1. Optimized conditions at 110 °C yielded CNFs with 85.3 % crystallinity, 0.64 mmol/g carboxyl content, 5.15 nm width distribution, and excellent dispersion in water for at least six months. Additionally, CNFs enhanced the tensile strength of chia seed mucilage (CM) composite films, showing a significant improvement to 26.6 MPa, representing a 231.3 % increase over the control film. This study offers a promising approach for efficiently producing CNFs from raw plants.

Tackling the challenge of drying and redispersion of cellulose nanofibrils via membrane-facilitated liquid phase exchange

It is generally acknowledged that to advance the application of cellulose nanofibrils (CNFs) in product formulations, challenges associated with the drying and redispersion of this material must be addressed. Despite increased research efforts in this area, these interventions still involve the use of additives or conventional drying technologies, which both have the capacity to drive up the cost of the final CNF powders. Herein, we prepared dried and redispersible CNF powders with varying surface functionalities without the use of additives nor conventional drying technologies. Rapid drying in air was achieved after liquid phase exchange from water to isopropyl alcohol. The surface properties, morphology and thermal stabilities were the same for the never-dried and redispersed forms. The rheological properties of the CNFs were also unaffected after drying and redispersion of unmodified and organic acid modified materials. However, for 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-mediated oxidised CNFs with higher surface charge and longer fibrils, the storage modulus could not be recovered to the never-dried state because of the possible non-selective reduction in length upon redispersion. Nevertheless, this method provides an effective and low-cost process for the drying and redispersion of unmodified and surface modified CNFs.

Morphological Changes of Polymer-Grafted Nanocellulose during a Drying Process

Nanocellulose is emerging as a sustainable building block in materials science. Surface modification via polymer grafting has proven to be effective in tuning diverse material properties of nanocellulose, including wettability of films and the reinforcement effect in polymer matrices. Despite its widespread use in various environments, the structure of a single polymer-grafted nanocellulose remains poorly understood. Here, we investigate the morphologies of polymer-grafted CNFs at water-mica and air-mica interfaces by using all-atom molecular dynamics simulation and atomic force microscopy. We show that the morphologies of the polymer-grafted CNFs undergo a marked change in response to the surrounding environment due to variations in the conformation of the surface polymer chains. Our results provide novel insights into the molecular structure of polymer-grafted CNFs and can facilitate the design and development of innovative biomass-based nanomaterials.

Evaluation of Polycaprolactone Applicability for Manufacturing High-Performance Cellulose Nanocrystal Cement Composites

This experimental study examined the aplication effect of polycaprolactone (PCL), an organic resin material with excellent elasticity and ductility, on improving the mechanical performance of cellulose nanocrystal (CNC) cement composites. PCL was compared according to its shape, and in the case of Granules, which is the basic shape, interfacial adhesion with cement was not achieved, so a dichloromethane (DCM) solution was used to dissolve and use the Granules form. As a method for bonding PCL to the CNC surface, the CNC surface was modified using 3-aminopropyltriethoxysilane (APTES), and surface silylation was confirmed through Fourier transform infrared spectroscopy (FT-IR) analysis. In order to evaluate the dispersibility according to the application of PCL to the modified CNC, particle size analysis (PSA) and zeta potential analysis were performed according to the PCL mixing ratio. Through the PSA and zeta potential values, the highest dispersion stability was shown at 1 vol.%, the cohesive force of CNC was low, and the dispersion stability was high according to the application of PCL. According to the results of the dispersion stability evaluation, the degree of hydration of the dissolved PCL 1 vol.%, CNC-only specimens, and plain specimens were analyzed. CNC acted as a water channel inside the cement to accelerate hydration in the non-hydrated area, resulting in an increased degree of hydration. However, the incorporation of PCL showed a low degree of hydration, and the analysis of strength characteristics also showed a decrease of approximately 27% compared with that of plain specimens. This was because the bonding with SiO2 was not smooth owing to the solvent, thus affecting internal hydration. In order to investigate the effect of the PCL shape, the compressive and flexural strength characteristics were compared using PCL powder as an additional parameter. The compressive strength and flexural strength were improved by about 54% and 26%, respectively, in the PCL powder 15 wt% specimen compared to the general specimen. Scanning electron microscopy (SEM) analysis confirmed that the filler effect, which made the microporous structure denser, affects the mechanical performance improvement.

Cellulose-Based Ionic Conductor: An Emerging Material toward Sustainable Devices

Ionic conductors (ICs) find widespread applications across different fields, such as smart electronic, ionotronic, sensor, biomedical, and energy harvesting/storage devices, and largely determine the function and performance of these devices. In the pursuit of developing ICs required for better performing and sustainable devices, cellulose appears as an attractive and promising building block due to its high abundance, renewability, striking mechanical strength, and other functional features. In this review, we provide a comprehensive summary regarding ICs fabricated from cellulose and cellulose-derived materials in terms of fundamental structural features of cellulose, the materials design and fabrication techniques for engineering, main properties and characterization, and diverse applications. Next, the potential of cellulose-based ICs to relieve the increasing concern about electronic waste within the frame of circularity and environmental sustainability and the future directions to be explored for advancing this field are discussed. Overall, we hope this review can provide a comprehensive summary and unique perspectives on the design and application of advanced cellulose-based ICs and thereby encourage the utilization of cellulosic materials toward sustainable devices.

Design of Bifunctional Nanocatalysts Based on Zeolites for Biomass Processing

Bifunctional catalysts consisting of metal-containing nanoparticles (NPs) and zeolite supports have received considerable attention due to their excellent catalytic properties in numerous reactions, including direct (biomass is a substrate) and indirect (platform chemical is a substrate) biomass processing. In this short review, we discuss major approaches to the preparation of NPs in zeolites, concentrating on methods that allow for the best interplay (synergy) between metal and acid sites, which is normally achieved for small NPs well-distributed through zeolite. We focus on the modification of zeolites to provide structural integrity and controlled acidity, which can be accomplished by the incorporation of certain metal ions or elements. The other modification avenue is the adjustment of zeolite morphology, including the creation of numerous defects for the NP entrapment and designed hierarchical porosity for improved mass transfer. In this review, we also provide examples of synergy between metal and acid sites and emphasize that without density functional theory calculations, many assumptions about the interactions between active sites remain unvalidated. Finally, we describe the most interesting examples of direct and indirect biomass (waste) processing for the last five years.

Waterproof and ultrasensitive paper-based wearable strain/pressure sensor from carbon black/multilayer graphene/carboxymethyl cellulose composite

Huge electronic wastes motivated the flourishing of biodegradable electrically conductive cellulosic paper-based functional materials as flexible wearable devices. However, the relatively low sensitivity and unstable output in combination with poor wet strength under high moisture circumstances impeded the practical application. Herein, a superhydrophobic cellulosic paper with ultrahigh sensitivity was proposed by innovatively employing ionic sodium carboxymethyl cellulose (CMC) as bridge to reinforce the interfacial interaction between carbon black (CB) and multilayer graphene (MG) and SiO₂ nanoparticles as superhydrophobic layer. The resultant paper-based (PB) sensor displayed excellent strain sensing behaviors, wide working range (-1.0 %-1.0 %), ultrahigh sensitivity (gauge factor, GF = 70.2), and satisfied durability (>10,000 cycles). Moreover, the superhydrophobic surface offered well waterproof and self-cleaning properties, even stable running data without encapsulation under extremely high moisture conditions. Impressively, when the fabricated PB sensor was applied for electronic-skin (E-skin), the signal capture of spatial strain of E-skin upon bodily motion was breezily achieved. Thus, our work not only provides a new pathway for reinforcing the interfacial interaction of electrically conductive carbonaceous materials, but also promises a category of unprecedentedly superhydrophobic cellulosic paper-based strain sensors with ultra-sensitivity in human-machine interfaces field.

Harnessing Nature's Ingenuity: A Comprehensive Exploration of Nanocellulose from Production to Cutting-Edge Applications in Engineering and Sciences

Primary material supply is the heart of engineering and sciences. The depletion of natural resources and an increase in the human population by a billion in 13 to 15 years pose a critical concern regarding the sustainability of these materials; therefore, functionalizing renewable materials, such as nanocellulose, by possibly exploiting their properties for various practical applications, has been undertaken worldwide. Nanocellulose has emerged as a dominant green natural material with attractive and tailorable physicochemical properties, is renewable and sustainable, and shows biocompatibility and tunable surface properties. Nanocellulose is derived from cellulose, the most abundant polymer in nature with the remarkable properties of nanomaterials. This article provides a comprehensive overview of the methods used for nanocellulose preparation, structure-property and structure-property correlations, and the application of nanocellulose and its nanocomposite materials. This article differentiates the classification of nanocellulose, provides a brief account of the production methods that have been developed for isolating nanocellulose, highlights a range of unique properties of nanocellulose that have been extracted from different kinds of experiments and studies, and elaborates on nanocellulose potential applications in various areas. The present review is anticipated to provide the readers with the progress and knowledge related to nanocellulose. Pushing the boundaries of nanocellulose further into cutting-edge applications will be of particular interest in the future, especially as cost-effective commercial sources of nanocellulose continue to emerge.

Alignment-Rheology Relationship of Biosourced Rod-Like Colloids and Polymers under Flow

Fluids composed of biosourced rod-like colloids (RC) and rod-like polymers (RP) have been extensively studied due to various promising applications relying on their flow-induced orientation (e.g., fiber spinning). However, the relationship between RC and RP alignment and the resulting rheological properties is unclear due to experimental challenges. We investigate the alignment-rheology relationship for a variety of biosourced RC and RP, including cellulose-based particles, filamentous viruses, and xanthan gum, by simultaneous measurements of the shear viscosity and fluid anisotropy under rheometric shear flows. For each system, the RC and RP contribution to the fluid viscosity, captured by the specific viscosity η_sp, follows a universal trend with the extent of the RC and RP alignment independent of concentration. We further exploit this unique rheological-structural link to retrieve a dimensionless parameter (β) directly proportional to η_sp at zero shear rate (η_0,sp), a parameter often difficult to access from experimental rheometry for RC and RP with relatively long contour lengths. Our results highlight the unique link between the flow-induced structural and rheological changes occurring in RC and RP fluids. We envision that our findings will be relevant in building and testing microstructural constitutive models to predict the flow-induced structural and rheological evolution of fluids containing RC and RP.

Insight into the Latest Medical Applications of Nanocellulose

Nanocelluloses (NCs) are appealing nanomaterials that have experienced rapid development in recent years, with great potential in the biomedical field. This trend aligns with the increasing demand for sustainable materials, which will contribute both to an improvement in wellbeing and an extension of human life, and with the demand to keep up with advances in medical technology. In recent years, due to the diversity of their physical and biological properties and the possibility of tuning them according to the desired goal, these nanomaterials represent a point of maximum interest in the medical field. Applications such as tissue engineering, drug delivery, wound dressing, medical implants or those in cardiovascular health are some of the applications in which NCs have been successfully used. This review presents insight into the latest medical applications of NCs, in the forms of cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs) and bacterial nanocellulose (BNC), with an emphasis on the domains that have recently experienced remarkable growth, namely wound dressing, tissue engineering and drug delivery. In order to highlight only the most recent achievements, the presented information is focused on studies from the last 3 years. Approaches to the preparation of NCs are discussed either by top-down (chemical or mechanical degradation) or by bottom-up (biosynthesis) techniques, along with their morphological characterization and unique properties, such as mechanical and biological properties. Finally, the main challenges, limitations and future research directions of NCs are identified in a sustained effort to identify their effective use in biomedical fields.

Nano-Chitosan/Eucalyptus Oil/Cellulose Acetate Nanofibers: Manufacturing, Antibacterial and Wound Healing Activities

Accelerated wound healing in infected skin is still one of the areas where current therapeutic tactics fall short, which highlights the critical necessity for the exploration of new therapeutic approaches. The present study aimed to encapsulate Eucalyptus oil in a nano-drug carrier to enhance its antimicrobial activity. Furthermore, in vitro, and in vivo wound healing studies of the novel nano-chitosan/Eucalyptus oil/cellulose acetate electrospun nanofibers were investigated. Eucalyptus oil showed a potent antimicrobial activity against the tested pathogens and the highest inhibition zone diameter, MIC, and MBC (15.3 mm, 16.0 μg/mL, and 256 μg/mL, respectively) were recorded against Staphylococcus aureus. Data indicated a three-fold increase in the antimicrobial activity of Eucalyptus oil encapsulated chitosan nanoparticle (43 mm inhibition zone diameter against S. aureus). The biosynthesized nanoparticles had a 48.26 nm particle size, 19.0 mV zeta potential, and 0.45 PDI. Electrospinning of nano-chitosan/Eucalyptus oil/cellulose acetate nanofibers was conducted, and the physico-chemical and biological properties revealed that the synthesized nanofibers were homogenous, with a thin diameter (98.0 nm) and a significantly high antimicrobial activity. The in vitro cytotoxic effect in a human normal melanocyte cell line (HFB4) proved an 80% cell viability using 1.5 mg/mL of nano-chitosan/Eucalyptus oil/cellulose acetate nanofibers. In vitro and in vivo wound healing studies revealed that nano-chitosan/Eucalyptus oil/cellulose acetate nanofibers were safe and efficiently enhanced the wound-healing process through enhancing TGF-β, type I and type III collagen production. As a conclusion, the manufactured nano-chitosan/Eucalyptus oil/cellulose acetate nanofiber showed effective potentiality for its use as a wound healing dressing.

Multifunctional fully biobased aerogels for water remediation: Applications for dye and heavy metal adsorption and oil/water separation

Water ecosystem contamination from industrial pollutants is an emerging threat to both humans and native species, making it a point of global concern. In this work, fully biobased aerogels (FBAs) were developed by using low-cost cellulose filament (CF), chitosan (CS), citric acid (CA), and a simple and scalable approach, for water remediation applications. The FBAs displayed superior mechanical properties (up to ∼65 kPa m³ kg^-1 specific Young's modulus and ∼111 kJ/m³ energy absorption) due to CA acting as a covalent crosslinker in addition to the natural hydrogen bonding and electrostatic interactions between CF and CS. The addition of CS and CA increased the variety of functional groups (carboxylic acid, hydroxyl and amines) on the materials' surface, resulting in super-high dye and heavy metal adsorption capacities (619 mg/g and 206 mg/g for methylene blue and copper, respectively). Further modification of FBAs with a simple approach using methyltrimethoxysilane endowed aerogel oleophilic and hydrophobic properties. The developed FBAs showed a fast performance in water and oil/organic solvents separation with more than 96% efficiency. Besides, the FBA sorbents could be regenerated and reused for multiple cycles without any significant impact on their performance. Moreover, thanks to the presence of amine groups by addition of CS, FBAs also displayed antibacterial properties by preventing the growth of Escherichia coli on their surface. This work demonstrates the preparation of FBAs from abundant, sustainable, and inexpensive natural resources for applications in wastewater purification.

Evaluation of a Hydrophobic Coating Agent Based on Cellulose Nanofiber and Alkyl Ketone Dimer

In this study, we report on the development and testing of hydrophobic coatings using cellulose fibers. The developed hydrophobic coating agent secured hydrophobic performance over 120°. In addition, a pencil hardness test, rapid chloride ion penetration test, and carbonation test were conducted, and it was confirmed that concrete durability could be improved. We believe that this study will promote the research and development of hydrophobic coatings in the future.

In-situ CBM3-modified bacterial cellulose film with improved mechanical properties

Cellulose materials have poor wet strength and are susceptible to acidic or basic environments. Herein, we developed a facile strategy to modify bacterial cellulose (BC) with a genetically engineered Family 3 Carbohydrate-Binding Module (CBM3). To assess the effect of BC films, water adsorption rate (WAR), water holding capacity (WHC), water contact angle (WCA), and mechanical and barrier properties were determined. The results showed that CBM3-modified BC film exhibited significant strength and ductility improvement, reflecting improved mechanical properties of the film. The excellent wet strength (both in the acidic and basic environment), bursting strength, and folding endurance of CBM3-BC films were due to the strong interaction between CBM3 and fiber. The toughness of CBM3-BC films reached 7.9, 28.0, 13.3, and 13.6 MJ/m³, which were 6.1, 1.3, 1.4, and 3.0 folds over the control for conditions of dry, wet, acidic, and basic, respectively. In addition, its gas permeability was reduced by 74.3 %, and folding times increased by 56.8 % compared with the control. The synthesized CBM3-BC films may hold promise for future applications in food packaging, paper straw, battery separator, and other fields. Finally, the in situ modification strategy used to BC can be successfully applied in other functional modifications for BC materials.

Nanocellulose-based aerogels for water purification: A review

Water purification using thin membranes at high pressures through adsorption and size exclusion is the widely used mechanism due to its simplicity and enhanced efficiency compared to other traditional water purification methods. Aerogels have the potential to replace conventional thin membranes considering their unmatched adsorption/absorption capacity and higher water flux due to their unique highly porous (99 %) 3D structure, ultra-low density (~1.1 to 500 mg/cm³), and very high surface area. The availability of a large number of functional groups, surface tunability, hydrophilicity, tensile strength and flexibility of nanocellulose (NC) makes it a potential candidate for aerogel preparation. This review discusses the preparation and employment of NC-based aerogels in the removal of dyes, metal ions and oils/organic solvents. It also offers recent updates on the effect of various parameters that enhance its adsorption/absorption performance. The future perspectives of NC aerogels and their performance with the emerging materials chitosan and graphene oxide are also compared.

Perspectives on the Lindman Hypothesis and Cellulose Interactions

In the history of cellulose chemistry, hydrogen bonding has been the predominant explanation when discussing intermolecular interactions between cellulose polymers. This is the general consensus in scholarly textbooks and in many research articles, and it applies to several other biomacromolecules' interactions as well. This rather unbalanced description of cellulose has likely impacted the development of materials based on the processing of cellulose-for example, via dissolution in various solvent systems and regeneration into solid materials, such as films and fibers, and even traditional wood fiber handling and papermaking. In this review, we take as a starting point the questioning of the general description of the nature of cellulose and cellulose interactions initiated by Professor Björn Lindman, based on generic physicochemical reasoning about surfactants and polymers. This dispute, which became known as "the Lindman hypothesis", highlights the importance of hydrophobic interactions in cellulose systems and that cellulose is an amphiphilic polymer. This paper elaborates on Björn Lindman's contribution to the subject, which has caused the scientific community to revisit cellulose and reconsider certain phenomena from other perspectives.

Preparation and characterization of starch-based composite films reinforced by quinoa (Chenopodium quinoa Willd.) straw cellulose nanocrystals

The development of green and biodegradable nanomaterials is significant for the sustainable utilization of renewable lignocellulosic biomass. This work aimed to obtain the cellulose nanocrystals from quinoa straws (QCNCs) by acid hydrolysis. The optimal extraction conditions were investigated by response surface methodology, and the physicochemical properties of QCNCs were evaluated. The maximum yield of QCNCs (36.58 ± 1.42 %) was obtained under the optimal extraction conditions of 60 % (w/w) sulfuric acid concentration, 50 °C reaction temperature, and 130 min reaction time. The characterization results of QCNCs showed that it is a rod-like material with an average length of 190.29 ± 125.25 nm, an average width of 20.34 ± 4.69 nm, excellent crystallinity (83.47 %), good water dispersibility (Zeta potential = -31.34 mV) and thermal stability (over 200 °C). The addition of 4-6 wt% QCNCs could significantly improve the elongation at break and water resistance of high-amylose corn starch films. This study will pave the route for improving the economic value of quinoa straw, and provide relevant proof of QCNCs for the preliminary application in starch-based composite films with the best performance.

One-pot synthesis of magnetic cellulose nanocrystal and its post-functionalization for doxycycline adsorption

The composite of magnetite (Fe₃O₄) and cellulose nanocrystal (CNC) is considered a potential adsorbent for water treatment and environmental remediation. In the current study, a one-pot hydrothermal procedure was utilized for magnetic cellulose nanocrystal (MCNC) development from microcrystalline cellulose (MCC) in the presence of ferric chloride, ferrous chloride, urea, and hydrochloric acid. The x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), and Fourier-transform infrared spectroscopy analysis confirmed the presence of CNC and Fe₃O₄, while transmission electron microscopy (TEM) and dynamic light scattering (DLS) analysis verified their respective sizes (< 400 nm and ≤ 20 nm) in the generated composite. To have an efficient adsorption activity for doxycycline hyclate (DOX), the produced MCNC was post-treated using chloroacetic acid (CAA), chlorosulfonic acid (CSA), or iodobenzene (IB). The introduction of carboxylate, sulfonate, and phenyl groups in the post-treatment was confirmed by FTIR and XPS analysis. Such post treatments decreased the crystallinity index and thermal stability of the samples but improved their DOX adsorption capacity. The adsorption analysis at different pHs revealed the increase in the adsorption capacity by reducing the basicity of the medium due to decreasing electrostatic repulsions and inducing strong attractions.

Molecular Dynamics of Drying-Induced Structural Transformations in a Single Nanocellulose

Nanocellulose is attracting attention in the field of materials science as a sustainable building block. Nanocellulose-based materials, such as films, membranes, and foams, are fabricated by drying colloidal dispersions. However, little is known about how the structure of a single nanocellulose changes during the complex drying process. Here, all-atom molecular dynamics simulations and atomic force microscopy is used to investigate the structural dynamics of single nanocellulose during drying. It is found that the twist morphology of the nanocellulose became localized along the fibril axis during the final stage of the drying process. Moreover, it is shown that conformational changes at C6 hydroxymethyl groups and glycoside bond is accompanied by the twist localization, indicating that the increase in the crystallinity occurred in the process. It is expected that the results will provide molecular insights into nanocellulose structures in material processing, which is helpful for the design of materials with advanced functionalities.

Wearable, Biodegradable, and Antibacterial Multifunctional Ti3C2Tx MXene/Cellulose Paper for Electromagnetic Interference Shielding and Passive and Active Dual-Thermal Management

An energy-saving scheme that can simultaneously realize electromagnetic interference (EMI) shielding, passive solar radiative heating, and active Joule heating in a single wearable device is still a huge challenge. Here, by combining the unique properties of Ti₃C₂T_x MXene and biocompatible cellulose nanofibers (CNFs), a flexible, degradable, and antibacterial multifunctional Ti₃C₂T_x/CNF paper (∼0.6 Ω/sq) is constructed through a facile vacuum filtration strategy. The resultant device not only exhibits an admirable EMI shielding effectiveness of ∼48.5 dB at the X-band and a superior heating property including dual-driven electrothermal and photothermal conversion without energy but also possesses wide temperature range regulation and long-time stability. More impressively, both high antibacterial efficiency (toward both gram-positive and gram-negative bacteria) and good degradability with low-concentration hydrogen peroxide solution can also be achieved in Ti₃C₂T_x/CNF papers. This study provides a promising platform for practical applications of multifunctional Ti₃C₂T_x/CNFs in EMI shielding, thermotherapy, heat preservation, and antibacterial protection in harsh environments, satisfying the demands for energy-saving, environmentally friendly, and sustainable development.

Organic gelatin-coated ZnNPs for the production of biodegradable biopolymer films

Petroleum-based polymers have raised significant environmental concerns. It is critical to create compostable, good biocompatibility, and nontoxic polymers to replace petroleum-based polymers. Thus, this research was performed to extract the gelatin from fish waste cartilage and coated it over the surface of spherical shaped pre-synthesized ZnNPs along with a suitable plasticizer to produce the biodegradable film. The presence of gelatin on the surface of ZnNPs was first confirmed using UV-visible spectrophotometers, as well as the characteristic functional groups involved in the coating were investigated using Fourier-Transform Infrared Spectroscopy (FTIR). The morphological appearance of gelatin coated ZnNPs was ranged from 41.43 to 52.31 nm, the shape was found as platonic to pentagonal shape, and the fabricated film was observed through Scanning Electron Microscope (SEM). The thickness, density, and tensile strength of fabricated film were found to be 0.04-0.10 mm, 0.10-0.27 g/cm³, and 31.7 kPa. These results imply that the fish waste cartilage gelatin coated ZnNPs-based nanocomposite can be used for film preparation as well as a wrapper for food and pharmaceutical packaging.

Alkali-oxygen cooking coupled with ultrasonic etching for directly defibrillation of bagasse parenchyma cells into cellulose nanofibrils

A scheme combining alkali‑oxygen cooking and ultrasonic etching cleaning was developed for the short range preparation of CNF from bagasse pith, which has a soft tissue structure and is rich in parenchyma cells. This scheme expands the utilization path of sugar waste sucrose pulp. The effect of NaOH, O₂, macromolecular carbohydrates, and lignin on subsequent ultrasonic etching was analyzed, and it was found that the degree of alkali‑oxygen cooking was positively correlated with the difficulty of subsequent ultrasonic etching. The mechanism of ultrasonic nano-crystallization was found to be the bidirectional etching mode from the edge and surface cracks of the cell fragments by ultrasonic microjet in the microtopography of CNF. The optimum preparation scheme was obtained under the condition of 28 % NaOH content and 0.5 MPa O₂, which solves the problem of low-value utilization of bagasse pith and environmental pollution, providing a new possibility for the source of CNF.

Fabrication of Advanced Cellulosic Triboelectric Materials via Dielectric Modulation

The rapid rise of triboelectric nanogenerators (TENGs), which are emerging energy conversion devices in advanced electronics and wearable sensing systems, has elevated the interest in high-performance and multifunctional triboelectric materials. Among them, cellulosic materials, affording high efficiency, biodegradability, and customizability, are becoming a new front-runner. The inherently low dielectric constant limits the increase in the surface charge density. However, owing to its unique structure and excellent processability, cellulose shows great potential for dielectric modulation, providing a strong impetus for its advanced applications in the era of Internet of Things and artificial intelligence. This review aims to provide comprehensive insights into the fabrication of dielectric-enhanced cellulosic triboelectric materials via dielectric modulation. The exceptional advantages and research progress in cellulosic materials are highlighted. The effects of the dielectric constant, polarization, and percolation threshold on the charge density are systematically investigated, providing a theoretical basis for cellulose dielectric modulation. Typical dielectric characterization methods are introduced, and their technical characteristics are analyzed. Furthermore, the performance enhancements of cellulosic triboelectric materials endowed by dielectric modulation, including more efficient energy harvesting, high-performance wearable electronics, and impedance matching via material strategies, are introduced. Finally, the challenges and future opportunities for cellulose dielectric modulation are summarized.

Isotropic Gels of Cellulose Nanocrystals Grafted with Dialkyl Groups: Influence of Surface Group Topology from Nonlinear Oscillatory Shear

Attractive (non-self-assembling) aqueous cellulose nanocrystal (CNC) suspensions were topologically tailored into isotropic gels through the surface grafting of dialkyl groups. We thus focus on the influence of CNC concentration, including for pristine CNC, surface linker branching, branching degree, and the influence of side group size and branch-on-branch surface-grafted groups. The resulting mobility and strength of interaction in particle-particle interaction mediated by the surface groups was investigated from a rheological point of view. The emphasis is on nonlinear material parameters from Fourier-transform rheology and stress decomposition analysis. The results show that nonlinear material parameters are more sensitive than linear viscoelastic parameters to the onset of weakly interconnected networks in pristine CNC isotropic suspensions. All surface-modified CNC suspensions resulted in isotropic gels. The nonlinear material parameters were found to be broadly sensitive to CNC concentration, branching, degree of branching and surface-grafted linkers' length. However, the length of the grafted chains and the degree of branching were the primary factors influencing the nonlinear material response. Furthermore, the results showed evidence of two strain amplitude ranges with distinct nonlinear signatures that could be attributed to the disruption of weak network connection points and to distortions of more dense (aggregate) network regions, respectively.