Severe PCDD/F and PBDD/F pollution in air around an electronic waste dismantling area in China

PCDD/Fs and dioxin-like PCBs in surface sediments from Lake Victoria, East Africa

Surface sediments (<60 cm) from the Napoleon Gulf and Thurston Bay on the northern shore of Lake Victoria were analyzed for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dl-PCBs). Fifteen PCDD/Fs and eleven dl-PCBs were found in 75.5% of the samples. The maximum concentrations of PCDD/Fs and dl-PCBs were 44.1 and 136 pg g(-1) dry weight (dw), respectively. Octachlorodibenzo-p-dioxin was the predominant PCDD/F congener at the Napoleon Gulf and Thurston Bay area. Regarding the dl-PCBs, a variation in levels was observed between the mono-ortho PCBs and non-ortho PCBs, with the former having higher levels than the latter. The PCDD/F and dl-PCB levels, in the sediments of Napoleon Gulf, which is near urban centers and industrial areas were markedly higher (α ≤ 0.05) than those from the Thurston Bay, which is offshore, suggesting that human activities could be sources of the pollutants to the surrounding water resources. World Health Organization-toxic equivalency quotients (WHO-TEQs) lay in the range of 0.07-5.53 pg g(-1) dw for PCDD/Fs and 0.01-0.23 pg g(-1) dw for dl-PCBs. 23.1% of samples from the Napoleon Gulf had their results above the set WHOPCDD/Fs-TEQ value.

Levels, profiles and source identification of PCDD/Fs in farmland soils of Guiyu, China

The present study finished the first comprehensive survey of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) in farmland soils of Guiyu, China. Guiyu was a major electronic wastes (EWs) dismantling area, but primitive and crude EWs disposal manner had led to severe PCDD/Fs pollution there. Twenty-three farmland soil samples covering the entire Guiyu region were analyzed. Toxic equivalent quantities (I-TEQs) of soils in EWs disposal areas were 5.7-57pg TEQ g(-1), and the total concentrations of tetra- to octa-homologues were 2816-17738pgg(-1). The SL district was a heavily contaminated area, and the neighboring SMP town was influenced by Guiyu. EWs disposal might be the source of PCDD/Fs. The homologue profiles were of three types, representing different disposal manner of EWs. Tetrachlorodibenzo-p-dioxins (TCDDs) and octachlorodibenzo-p-dioxin (OCDD) could be used as indicators for source identification, open thermal disposal of EWs was inclined to lead to formation of TCDDs, OCDD was a product of non-thermal processes.

Characterization of residues from dismantled imported wastes

Residues from the imported wastes dismantling process create a great burden on the ambient environment. To develop appropriate strategies for the disposal of such residues, their characteristics were studied through background value analysis and toxicity leaching tests. Our results showed that the heavy metals concentrations in residues were high, particularly those of Cu (7180 mg kg(-1)), Zn (2783 mg kg(-1)), and Pb (1954 mg kg(-1)). Toxicity leaching tests revealed a high metal releasing risk of such residues if they are disposed of in a landfill. However, the residues of imported wastes were also found to have some intrinsic metal recycling value.

Electronic waste management approaches: an overview

Electronic waste (e-waste) is one of the fastest-growing pollution problems worldwide given the presence if a variety of toxic substances which can contaminate the environment and threaten human health, if disposal protocols are not meticulously managed. This paper presents an overview of toxic substances present in e-waste, their potential environmental and human health impacts together with management strategies currently being used in certain countries. Several tools including life cycle assessment (LCA), material flow analysis (MFA), multi criteria analysis (MCA) and extended producer responsibility (EPR) have been developed to manage e-wastes especially in developed countries. The key to success in terms of e-waste management is to develop eco-design devices, properly collect e-waste, recover and recycle material by safe methods, dispose of e-waste by suitable techniques, forbid the transfer of used electronic devices to developing countries, and raise awareness of the impact of e-waste. No single tool is adequate but together they can complement each other to solve this issue. A national scheme such as EPR is a good policy in solving the growing e-waste problems.

Sources and deposition fluxes of PCDD/Fs in a high-mountain lake in central Taiwan

Sun Moon Lake (SML) is located at 23°52'N, 120°55'E near the center of Taiwan Island. In 2009, deposition of polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) in ambient air, water bodies and sediments were measured in SML in this study. The monthly atmospheric PCDD/F deposition ranged from 0.61 to 3.0 pg I-TEQm(-2)d(-1) in the vicinity area of SML. Average PCDD/F concentrations (0.008-0.012 pg I-TEQ L(-1)) in the surface water were uniform and sufficiently mixed at the center, outflow and south bay of SML. However, the PCDD/F content (2.42±0.5 ng I-TEQ kg(-1) d.w.) of surface sediments measured at the south bay of SML was significantly higher than the PCDD/F content at other sampling sites. To evaluate the anthropogenic pollution history in central Taiwan, PCDD/F concentrations were also analyzed at 1-2 cm intervals in three dated sediment cores collected at different locations of SML. The year dating by the sediment cores at different depths was estimated from the sedimentation rate (0.47±0.13-1.35±0.22 cm y(-1)) calculated by (210)Pb and (137)Cs analysis. Based on the results of isotope analysis of sediment cores collected from the center, outflow and south bay of SML, PCDD/F concentrations at different locations appeared to be quite similar. PCDD/F concentrations in sediment cores began to increase in 1964 and reached a peak (4.78 ng I-TEQ kg(-1) d.w.) in 1968. In addition, variation in PCDD/F content at different depth of the sediment cores appeared to correlate directly with the rate of organochlorine pesticides production in Taiwan.

A microarray for microRNA profiling in spermatozoa from adult men living in an environmentally polluted site

We compared the miRNA expression profiles of spermatozoa from adult men living in an environment contaminated with electronic waste with those living in a normal environment, using a miRNA microarray. There were 73 significantly upregulated and 109 downregulated miRNAs in spermatozoa from men in the polluted environment compared with controls. Ten miRNAs were expressed significantly differently between the control and polluted samples and this result were further confirmed through quantitative real-time polymerase chain reaction amplification. A bioinformatics pipeline was developed to distinguish relationship with spermatogenesis. Our data indicated specific miRNAs expression of spermatozoa in men living in environmentally polluted sites and suggested that miRNAs have a role in regulating spermatogenesis. We also propose a subclassification scheme for miRNAs for assisting future experimental and computational functional analyses.

Life cycle assessment of TV sets in China: a case study of the impacts of CRT monitors

Along with the rapid increase in both production and use of TV sets in China, there is an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of these sets. This paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese TV sets. An assessment of the TV set device (focusing on the Cathode Ray Tube (CRT) monitor) was carried out using a detailed modular LCA based on the international standards of the ISO 14040 series. The LCA was constructed using SimaPro software version 7.2 and expressed with the Eco-indicator' 99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the CML method was used in order to estimate the influence of the choice of the assessment method on the results. Life cycle inventory information was compiled by Ecoinvent 2.2 databases, combined with literature and field investigations on the current Chinese situation. The established LCA study shows that the use stage of such devices has the highest environmental impact, followed by the manufacturing stage. In the manufacturing stage, the CRT and the Printed Circuit Board (PCB) are those components contributing the most environmental impacts. During the use phase, the environmental impacts are due entirely to the methods of electricity generation used to run them, since no other aspects were taken into account for this phase. The final processing step-the end-of-life stage-can lead to a clear environmental benefit when the TV sets are processed through the formal dismantling enterprises in China.

The relationship between magnetic parameters and heavy metal contents of indoor dust in e-waste recycling impacted area, Southeast China

Environmental contamination due to uncontrolled e-waste recycling is an emerging global problem. The aim of this study is to test the applicability of magnetic methods for detecting the metal pollutants emitted from e-waste recycling activities. Dust samples collected from a typical e-waste recycling region in Guiyu, Guangdong Province, China, were investigated using magnetic, geochemical, micro-morphological and mineralogical analysis. The values of mass-specific susceptibility (χ) and saturation isothermal remanent magnetization (SIRM) in dusts from e-waste recycling impacted areas ranged from 101 to 636×10(-8) m(3) kg(-1) and from 10.5 to 85.2×10(-3) Am(2) kg(-1), respectively. There was a significant correlation between SIRM and χ (r(2)=0.747, p<0.001), indicating that ferrimagnetic minerals were dominating χ in the dust samples. The values of χ(fd)% varied from 2.6 to 4.6% with a mean of 3.4%, which suggested that magnetic carriers in the dusts are predominately coarse-grained particles. Two shapes of magnetic particles, spherule (10-150 μm) and angular-shaped particles (30-300 μm), were identified by scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDX) analyses. κ-T curves, magnetic hysteresis loops and X-ray diffraction (XRD) analysis indicated that these magnetic particles were magnetite and goethite. There were significant correlations between SIRM and heavy metals (especially Cd, Co, Fe, Ni and Zn) as well as the Tomlinson pollution load index (PLI) of the dust, indicating that SIRM can be used as an efficient proxy for metal pollution in the e-waste recycling impacted area.

Temporal trends (2005-2009) of PCDD/Fs, PCBs, PBDEs in rice hulls from an e-waste dismantling area after stricter environmental regulations

Primitive e-waste dismantling activities have been of increasing concern due to serious environmental and human health problems, and therefore authorities in China have strengthened the regulations on illegal e-waste recycling activities. In this work, we used rice hull as a passive sampler and investigated temporal trends of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) in areas near e-waste recycling sites after the stricter regulations. Furthermore, the distribution patterns and composition profiles of these contaminants were also discussed. The average concentrations of the three groups of persistent organic pollutants (POPs) in rice hulls have markedly decreased during the period of 2005-2009. Specifically, from 12.9 (average value in 2005) to 0.37 pg WHO-TEQ/g (dry weight, dw) (in 2009) for PCDD/Fs, 47.6 (2005) to 7.10 ng g(-1)dw (2009) for PCBs, and 2.51 (2005) to 0.89 ng g(-1), dw (2009) for PBDEs. The significant decrease of combustion markers 2,3,4,7,8-PeCDF, 1,2,3,6,7,8HxCDF and PCB126, and the PCDD/PCDF ratio from 1:9 (2005) to 7:3 (2009) is likely a result of stricter regulations on open combustion activities. This study suggests that stricter control measures, strengthened laws and regulations and more environmental friendly techniques could be effective measures in reducing the release and formation of related POPs in typical e-waste dismantling sites, and these measures could further improve the quality of the environment and health of the local inhabitants.

Carcinogenic polycyclic aromatic hydrocarbons in umbilical cord blood of human neonates from Guiyu, China

Unregulated electronic-waste recycling results in serious environmental pollution of polycyclic aromatic hydrocarbons (PAHs) in Guiyu, China. We evaluated the body burden of seven carcinogenic PAHs and potential health risks for neonates. Umbilical cord blood (UCB) samples were collected from Guiyu (n=103), and the control area of Chaonan (n=80), China. PAHs in UCB were determined by gas chromatography/mass spectrometry. The median ∑7c-PAH concentration was 108.05 ppb in UCB samples from Guiyu, vs. 79.36 ppb in samples from Chaonan. Residence in Guiyu and longer cooking time of food during the gestation period were significant factors contributing to the ∑7c-PAH level. Benzo[a]anthracene (BaA), chrysene (Chr), and benzo[a]pyrene (BaP) were found to correlate with reduced neonatal height and gestational age. Infants experiencing adverse birth outcomes, on the whole, displayed higher BaA, Chr, and BaP levels compared to those with normal outcomes. We conclude that maternal PAH exposure results in fetal accumulation of toxic PAHs, and that such prenatal exposure correlates with adverse effects on neonatal health.

Multi-trace element levels and arsenic speciation in urine of e-waste recycling workers from Agbogbloshie, Accra in Ghana

To understand human contamination by multi-trace elements (TEs) in electrical and electronic waste (e-waste) recycling site at Agbogbloshie, Accra in Ghana, this study analyzed TEs and As speciation in urine of e-waste recycling workers. Concentrations of Fe, Sb, and Pb in urine of e-waste recycling workers were significantly higher than those of reference sites after consideration of interaction by age, indicating that the recycling workers are exposed to these TEs through the recycling activity. Urinary As concentration was relatively high, although the level in drinking water was quite low. Speciation analysis of As in human urine revealed that arsenobetaine and dimethylarsinic acid were the predominant As species and concentrations of both species were positively correlated with total As concentration as well as between each other. These results suggest that such compounds may be derived from the same source, probably fish and shellfish and greatly influence As exposure levels. To our knowledge, this is the first study on human contamination resulting from the primitive recycling of e-waste in Ghana. This study will contribute to the knowledge about human exposure to trace elements from an e-waste site in a less industrialized region so far scantly covered in the literature.

Characterizing the emission of chlorinated/brominated dibenzo-p-dioxins and furans from low-temperature thermal processing of waste printed circuit board

This study focuses primarily on the inventory of PCDD/Fs and PBDD/Fs associated with the low-temperature thermal processing of scrap printed circuit boards (PCBs). Twelve 2,3,7,8-substituted PBDD/Fs congeners were found in various sample outputs, with a total content of 60,000 ng TEQ/kg at 250°C under air atmosphere. A rapid increase of PBDD/Fs was produced with 160,000 ng TEQ/kg, at 275°C-about twice that under the N(2) atmosphere. At 275°C, the total contents of PCDD/Fs were only 170 and 770 ng TEQ/kg under an N(2) and air atmospheres respectively. The results reveal that a large contribution of PBDD/Fs emission may be expected from the dismantling or any other thermal processing of PCB scrap. PCDD/Fs, however, are formed and released into the environment in a variety of ways. Additional research is required to look for the causal factors that affect emissions.

Extraction of heavy metals from e-waste contaminated soils using EDDS

Environmental contamination due to uncontrolled e-waste recycling activities is drawing increasing attention in the world. Extraction of these metals with biodegradable chelant [S,S]-ethylenediaminedisuccinic acid (EDDS) and the factors influencing extraction efficacy were investigated in the present study. Results showed that the addition of EDDS at low pH (5.5) produced higher metal extraction than that at high pH (8.0) solution. Metal speciation analysis indicated that Cu was completely complexed with EDDS at different pH conditions with various amounts of EDDS applied. For Pb and Zn, at low EDDS dose of 0.304 mol/kg soil, they were present as Pb- and Zn-EDDS. However, at high EDDS dose of 1.26 mol/kg soil, most of Pb was bound with dissolved organic matter. Ca and Al were found to be strong competitors for trace metals to EDDS at low application dose and low pH condition.

Polybrominated diphenyl ethers in surface soils from e-waste recycling areas and industrial areas in South China: concentration levels, congener profile, and inventory

Polybrominated diphenyl ethers (PBDEs) were determined in 60 surface soils from two e-waste recycling sites (Qingyuan and Guiyu, China) and their surrounding areas to assess the extent and influence of PBDEs from e-waste recycling sites on the surrounding areas. A total of 32 surface soils from industrial areas in South China were also investigated for comparison. The mean concentrations of total PBDEs in the e-waste recycling sites of Guiyu and Qingyuan were 2,909 and 3,230 ng/g dry weight, respectively, whereas the PBDE concentrations decreased dramatically (1-2 orders of magnitude) with increasing distance from the recycling site, suggesting that the e-waste recycling activities were the major source of PBDEs in the surrounding areas. Decabromodiphenyl ethers accounted for 77.0 to 85.8% of total PBDEs in e-waste recycling areas, whereas it accounted for 90.2% in industrial areas. Principal component analysis showed that the major source of PBDEs in e-waste recycling areas were a combination of penta-, octa-, and deca-BDE commercial formulations, whereas deca-BDE commercial formulations were the major source of PBDE congeners in industrial areas. The inventories of PBDEs gave preliminary estimates of 6.22 tons and 13.4 tons for the e-waste recycling areas and industrial areas. The results suggested that significantly higher PBDEs in the e-waste recycling sites have already affected surrounding areas negatively within a relatively large distance. Because of the environmental persistence, bioaccumulation, and toxicity of PBDEs, improving the recycling techniques employed at such facilities and developing e-waste management policies are necessary.

High levels of antimony in dust from e-waste recycling in southeastern China

Environmental contamination due to uncontrolled e-waste recycling is an emerging global issue. Antimony (Sb) is a toxic element used in semiconductor components and flame retardants for circuit board within electronic equipment. When e-waste is recycled, Sb is released and contaminates the surrounding environment; however, few studies have characterized the extent of this problem. In this study, we investigated Sb and arsenic (As) distributions in indoor dust from 13 e-waste recycling villages in Guiyu, Guangdong Province, southeastern China. Results revealed significantly elevated concentrations of Sb (6.1-232 mg/kg) in dust within all villages, which were 3.9-147 times higher than those from the non e-waste sites, indicating e-waste recycling was an important source of Sb pollution. On the contrary, As concentrations (5.4-17.7 mg/kg) in e-waste dusts were similar to reference values from the control sites. Therefore, dusts emitted from e-waste recycling may be characterized by high Sb/As ratios, which may help identify the contamination due to the e-waste recycling activities.

Current needs and future directions of occupational safety and heath in a globalized world

This summary provides a synopsis of talks included in a symposium entitled "Current Needs and Future Directions of Occupational Safety and Heath in a Globalized World". The purpose of the symposium was to (1) highlight national and international agencies with occupational health related activities; (2) address electronic (e-)waste issues in developing countries where exposures are secondary to the handling and scavenging of scrap; and (3) discuss the effects of hazardous materials, such as polycyclic aromatic hydrocarbon (PAH) and tobacco smoke on child intelligence quotient (IQ) in developing countries.

Atmospheric deposition of polybrominated dibenzo-p-dioxins and dibenzofurans in Guangzhou, China: seasonal variations and sources

The atmospheric deposition of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) was investigated at four locations in different suburban and urban functional districts of Guangzhou City. The annual deposition fluxes of total PBDD/Fs (eight 2,3,7,8-substituted tetra- to hexa-BDD/Fs) were in the range of 36-51 (mean 46) pg m(-2) day(-1), and the corresponding TEQ fluxes were estimated to range between 7.9 and 11.3 (mean 10.3) pg I-TEQ m(-2) day(-1), indicating a noticeable pollution level. The deposition fluxes of PBDD/Fs during the wet season were 2-4 times as high as those during the dry season. Both rainfall and temperature positively correlated with PBDD/F deposition fluxes. Ambient gas/particle partition coefficients (K(p)) were predicted with SPARC. It appears seasonal variations of PBDD/F deposition fluxes were influenced by meteorological parameters and the local usage of brominated flame retardants (BFRs). The congener profiles of PBDD/Fs at four locations were similar either spatially or temporally, indicating that the main PBDD/F emission sources were similar to one another. Seasonal variations and congener patterns of PBDD/Fs indicated the possible sources included electronic waste recycling, industrial waste incinerators and products containing BFRs.

Levels and congener profiles of particle-bound polybrominated dibenzo-p-dioxins/furans (PBDD/Fs) in ambient air around Guangzhou, China

The mean particulate polybrominated dibenzo-p-dioxins/furans (PBDD/Fs) levels for Guangzhou were in the range of 225-2244 fg/m(3) and showed the spatial trend of background < suburb areas < urban area < industrial area, suggesting the industrial and urban sources of PBDD/Fs. The most abundant congeners were 2,3,7,8-TBDF, 1,2,3,7,8-PeBDF and 2,3,4,7,8-PeBDF. The mean toxicity equivalency quantities (TEQs) of PBDD/Fs were in the range of 89.3-456 fg I-TEQ/m(3) for Guangzhou, which were several times higher than that of the background area (49.1 fg I-TEQ/m(3)). The rough inhalation risk evaluation showed that the residents in Guangzhou were in relatively higher exposure levels of PBDD/Fs.

Characterization and inventory of PCDD/Fs and PBDD/Fs emissions from the incineration of waste printed circuit board

Many developing countries have not significantly changed their course with regard to electronic waste contamination, and they are still facing the specter of mountains of hazardous electronic waste, with serious consequences for both the environment and public health. An efficient and stable analytical method was developed to determine the inventory and emission factors of polybrominated dibenzo-p-dioxin and dibenzofurans (PBDD/Fs) and polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) formed from the incineration of scrap printed circuit boards (PCBs). Both PBDD/Fs and PCDD/Fs have been found in all experimental sections with a maximum formation rate at temperatures between 250 and 400 °C. The amounts tended first to increase and then began to decrease as the temperature rose. When subjected to a heating temperature of 325 °C, the total content of twelve 2,3,7,8-substituted PBDD/Fs congeners (tetra- through octabromo-) gathered from three outputs was the largest, at 19 000, 160 000, and 57 ng TEQ/kg in solid, liquid, and gaseous fractions, respectively; the total content of seventeen 2,3,7,8-substituted PCDD/Fs congeners (tetra- through octachloro-) was 820, 550, and 1.4 ng TEQ/kg. The formation of PCDD/Fs was remarkably less than that of PBDD/Fs because bromine concentrations considerably exceeded chlorine concentrations. The ingredients and conditions necessary to form PCDD/Fs or PBDD/Fs were definitely present, such as products of incomplete combustion, halogenides, an oxidizing atmosphere, and a catalyst-Cu salts being the most effective, significantly increasing the yields of PCDD/Fs and PBDD/Fs and decreasing the optimum temperature range.

PBDDs/Fs and PCDDs/Fs in the raw and clean flue gas during steady state and transient operation of a municipal waste combustor

Concentrations of polybrominated dibenzo-p-dioxins, and -dibenzofurans (PBDDs/Fs) and polychlorinated dibenzo-p-dioxins, and -dibenzofurans (PCDDs/Fs), were determined in the pre- and post-air pollution control system (APCS) flue gas of a municipal waste combustor (MWC). Operational transients of the combustor were found to considerably increase levels of PBDDs/Fs and PCDDs/Fs compared to steady state operation, both for the raw and clean flue gas; ΣPBDDs/Fs increased from 72.7 to 700 pg dscm(-1) in the raw, pre-APCS gas and from 1.45 to 9.53 pg dscm(-1) in the post-APCS flue gas; ΣPCDDs/Fs increased from 240 to 960 ng dscm(-1) in the pre-APCS flue gas, and from 1.52 to 16.0 ng dscm(-1) in the post-APCS flue gas. The homologue profile of PBDDs/Fs and PCDDs/Fs in the raw flue gas (steady state and transients) was dominated by hexa- and octa-isomers, while the clean flue gas homologue profile was enriched with tetra- and penta-isomers. The efficiency of the APCS for PBDD/F and PCDD/F removal was estimated as 98.5% and 98.7%, respectively. The cumulative TEQ(PCDD/F+PBDD/F) from the stack was dominated by PCDD/F: the TEQ of PBDD/F contributed less than 0.1% to total cumulative toxic equivalency of MWC stack emissions.

Institutional disposition and management of end-of-life electronics

Institutions both public and private face a challenge to develop policies to manage purchase, use, and disposal of electronics. Environmental considerations play an increasing role in addition to traditional factors of cost, performance and security. Characterizing current disposition practices for end-of-life electronics is a key step in developing policies that prevent negative environmental and health impacts while maximizing potential for positive social and economic benefits though reuse. To provide a baseline, we develop the first characterization of quantity, value, disposition, and flows of end-of-life electronics at a major U.S. educational institution. Results of the empirical study indicate that most end-of-first-life electronics were resold through public auction to individuals and small companies who refurbish working equipment for resale or sell unusable products for reclamation of scrap metal. Desktop and laptop computers sold for refurbishing and resale averaged U.S. $20-100 per unit, with computers sold directly to individuals for reuse reaching $250-350 per unit. This detailed assessment was coupled with a benchmarking survey of end-of-life electronics management practices at other U.S. universities. Survey results indicate that while auctions are still commonplace, an increasing number of institutions are responding to environmental concerns by creating partnerships with local recycling and resale entities and mandating domestic recycling. We use the analyses of current disposition practices as input to discuss institutional strategies for managing electronics. One key issue is the tension between benefits of used equipment sales, in terms of income for the institution and increased reuse for society, and the environmental risks because of unknown downstream practices.

Assessment of cadmium exposure for neonates in Guiyu, an electronic waste pollution site of China

This study aimed to determine the levels of placental cadmium (PCd) and cord blood cadmium (CBCd) and the resulting expression of placental metallothionein (MT) in neonates and to investigate cadmium (Cd) exposure levels in neonates and mothers who live in Guiyu, China, an electronic waste (e-waste) pollution site. Among the 423 mothers included in the study from 2004/2005 to 2007, 289 lived in Guiyu (exposed group) and 134 lived in Chaonan, located 10 km away from Guiyu (controls) and had never been exposed to e-waste pollution. CBCd and PCd levels were measured by atomic absorption spectrometry. Placental MT was examined by immunohistochemistry. Information on maternal and neonatal characteristics and exposure conditions was obtained from hospital records and by personal interviews. For the 3 years, the median CBCd was higher for Guiyu neonates than for controls (3.61 vs. 1.25 μg/L), with 25.61% of Guiyu subjects exhibiting a median CBCd that exceeded the safety limit defined by the World Health Organization (5 μg/L), as compared with 14.18% of control neonates (p < 0.01). In Guiyu, the mean PCd was higher than that for controls (0.17 ± 0.48 vs. 0.10 ± 0.11 μg/g, p ≤ 0.01). The high levels of CBCd and PCd were significantly associated with parents' occupational and environmental exposure to e-waste recycling pollutants. Staining for MT was positive and dense for 67.00% (67/100) of Guiyu neonates as compared with 32.69% (17/52) of controls (p < 0.01). Exposure to e-waste recycling pollutants increased Cd exposure in neonates, which was accompanied by increased placental MT expression.

Environmental issues and management strategies for waste electronic and electrical equipment

Issues surrounding the impact and management of discarded or waste electronic and electrical equipment (WEEE) have received increasing attention in recent years. This attention stems from the growing quantity and diversity of electronic and electrical equipment (EEE) used by modern society, the increasingly rapid turnover of EEE with the accompanying burden on the waste stream, and the occurrence of toxic chemicals in many EEE components that can pose a risk to human and environmental health if improperly managed. In addition, public awareness of the WEEE or "e-waste" dilemma has grown in light of popular press features on events such as the transition to digital television and the exportation of WEEE from the United States and other developed countries to Africa, China, and India, where WEEE has often not been managed in a safe manner (e.g., processed with proper safety precautions, disposed of in a sanitary landfill, combusted with proper air quality procedures). This paper critically reviews current published information on the subject of WEEE. The definition, magnitude, and characteristics of this waste stream are summarized, including a detailed review of the chemicals of concern associated with different components and how this has changed and continues to evolve over time. Current and evolving management practices are described (e.g., reuse, recycling, incineration, landfilling). This review discusses the role of regulation and policies developed by governments, institutions, and product manufacturers and how these initiatives are shaping current and future management practices.

Dioxin-like compounds in sediments from the Daliao River Estuary of Bohai Sea: distribution and their influencing factors

The concentrations, compositional profiles, and potential ecological risk of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) in sediments of the Daliao River Estuary were investigated. Total concentrations of PCDD/Fs, PCBs, and PCNs were in the range of 11.3-133.2 ng/kg dry weight (dw), 1 971-37 632 ng/kg dw and 33.1-284.4ng/kg dw, respectively. The total TEQ values varied from 0.37 to 4.08ng/kg dw, with the dominant contributions by PCDD/Fs, then by PCBs and PCNs. The spatial distributions of PCDD/Fs, PCBs and PCNs in the river estuary were much related to hydrodynamic conditions. The risk of contamination to the deeper sea was increased in the flood seasons. Moreover, our data confirmed that both organic matter in sediments and molecular properties of dioxin-like compounds were the factors which strongly influenced the partition behavior of these dioxin-like compounds between sediments and water phase in the estuarine zone.

PBDD/F impurities in some commercial deca-BDE

The study presented the concentrations and distributions of polybrominated dibenzo-p-dioxins and polybrominated dibenzofurans (PBDD/Fs) as impurities in some commercial decabromodiphenyl ether (DBDE) mixtures that were produced by several manufacturers. The total concentrations of 12 2,3,7,8-substituted tetra- to octa-BDD/F congeners were found to be in the range of 3.4-13.6 (mean 7.8) μg/g, averagely accounting for 99% of total PBDD/Fs. OBDF was the prevailing congener, followed by 1,2,3,4,6,7,8-HpBDF. In addition, OBDD and 1,2,3,4,7,8-HxBDF were also obviously detectable. The total concentrations of PBDD/Fs varied both between the manufacturers and between the lots. On the basis of the global demand for the commercial DBDE in 2001, the annual potential emissions of PBDD/Fs were calculated coarsely to be 0.43 (range: 0.21-0.78) tons. The major dioxin congeners, OBDF and 1,2,3,4,6,7,8-HpBDF, presenting in DBDE, were estimated to be formed from BDE-209, BDE-206, and/or BDE-207 via an intra-molecular elimination of Br2/HBr.

Exposure to PCBs, through inhalation, dermal contact and dust ingestion at Taizhou, China--a major site for recycling transformers

Air samples containing gaseous and particulate phases were collected from e-waste workplaces and residential areas of an intensive e-waste recycling area and compared with a reference site. The highest total concentration of PCBs was detected at transformer recycling workshops (17.6 ng m(-3)), followed by the residential area (3.37 ng m(-3)) at Taizhou, and the lowest was obtained at the residential area of the reference site, Lin'an (0.46 ng m(-3)). The same trend was also observed with regards to PCB levels in dust samples. The highest average PCBs level of 2824 ng g(-1) (dry wt) was found in the transformer recycling workshops, and was significantly higher than that of residential areas of Taizhou (572 ng g(-1) dry wt) and Lin'an (42.4 ng g(-1) dry wt). WHO-PCB-TEQ level in the workshops of Taizhou was 2216 pg TEQ(1998)g(-1) dry wt or 2159 pg TEQ(2005)g(-1) dry wt, due to the high abundance of PCB 126 (21.5 ng g(-1) dry wt), which contributed 97% or 99% of WHO-PCB-TEQs. The estimated intake of PCBs via dust ingestion and dermal absorption by transformer recycling workers were 77.5×10(-5) and 36.0×10(-5) pg WHO-PCB-TEQ(1998)kg(-1)d(-1), and 67.3×10(-5) and 31.3×10(-5) pg WHO-PCB-TEQ(2005)kg(-1)d(-1), respectively.

Developmental neurotoxicants in e-waste: an emerging health concern

OBJECTIVE

Electronic waste (e-waste) has been an emerging environmental health issue in both developed and developing countries, but its current management practice may result in unintended developmental neurotoxicity in vulnerable populations. To provide updated information about the scope of the issue, presence of known and suspected neurotoxicants, toxicologic mechanisms, and current data gaps, we conducted this literature review.

DATA SOURCES

We reviewed original articles and review papers in PubMed and Web of Science regarding e-waste toxicants and their potential developmental neurotoxicity. We also searched published reports of intergovernmental and governmental agencies and nongovernmental organizations on e-waste production and management practice.

DATA EXTRACTION

We focused on the potential exposure to e-waste toxicants in vulnerable populations-that is, pregnant women and developing children-and neurodevelopmental outcomes. In addition, we summarize experimental evidence of developmental neurotoxicity and mechanisms.

DATA SYNTHESIS

In developing countries where most informal and primitive e-waste recycling occurs, environmental exposure to lead, cadmium, chromium, polybrominated diphenyl ethers, polychlorinated biphenyls, and polycyclic aromatic hydrocarbons is prevalent at high concentrations in pregnant women and young children. Developmental neurotoxicity is a serious concern in these regions, but human studies of adverse effects and potential mechanisms are scarce. The unprecedented mixture of exposure to heavy metals and persistent organic pollutants warrants further studies and necessitates effective pollution control measures.

CONCLUSIONS

Pregnant women and young children living close to informal e-waste recycling sites are at risk of possible perturbations of fetus and child neurodevelopment.

Identification of monochloro-nonabromodiphenyl ethers in the air and soil samples from south China

Several studies have indicated that mixed brominated/chlorinated organic compounds could be formed during the thermal process such as the incineration of municipal solid waste and open burning of unregulated e-waste at recycling areas. In this study, air particles and soils from e-waste recycling areas, as well as outdoor and indoor air particles from urban Guangzhou, were collected and pooled for the identification of mixed chlorinated/brominated diphenyl ethers (PXDEs). Three monochloro-nonabromo diphenyl ethers (Cl-nonaBDEs), including 6'-Cl-BDE-206, 5'-Cl-BDE-207, and/or 4'-Cl-BDE-208, were first structurally identified in these air and soil samples. The identification was done by comparison of retention times in chromatograms of pure reference compounds and environmental samples, as well as by comparison with full-scan mass spectra data in electron capture negative ionization mode. Because of their similar physical-chemical properties, 4'-Cl-BDE-208 and 5'-Cl-BDE-207 absolutely coeluted, even on a nonpolar DB-5 column. Further investigation is still needed to clarify these findings. Nevertheless, the results indicated that Cl-nonaBDEs would occur in various environmental matrices. Because the replacement of Br by Cl will change the physical-chemical properties of PBDE analogues, environmental occurrence, fate, and transport, the potential toxicity of PXDEs should be investigated.

Deposition fluxes of PCDD/Fs in a reservoir system in northern Taiwan

In this study, polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) concentrations and depositions in ambient air, water column and sediment were measured at a coupled reservoir-watershed system in northern Taiwan. The atmospheric PCDD/F concentration measured in the vicinity of the reservoir ranged from 4.9 to 39 fg I-TEQ m(-3) and the Asian dust storm in February accounted for the peak value, which corresponded to a total suspended particle concentration of 128 μg m(-3). The atmospheric PCDD/F deposition ranged from 1.4 to 19 pg I-TEQ m(-2)d(-1), with higher deposition occurring during winter and spring (long-range transport events). During summer, when atmospheric deposition is lower, consecutive tropical cyclones (typhoons) bring heavy rainfall that enhances soil erosion and creates turbidity-driven intermediate flow. This results in significantly higher PCDD/F deposition in water column of the reservoir at 70 m water depth (179 pg I-TEQ m(-2)d(-1)) than at 20 m (21 pg I-TEQ m(-2)d(-1)) during typhoon event. The accumulation rate of PCDD/Fs (9.1 ng I-TEQm(-2)y(-1)) in the reservoir sediments (depth: 0-2 cm) was consistent with PCDD/F deposition obtained from water column (6.1 and 8.3 ng I-TEQ m(-2)y(-1)); however, it is significantly higher when compared to the atmospheric deposition (2.0 ng I-TEQ m(-2)y(-1)). Based on the mass balance between the measurements of atmospheric deposition and sinking particles in water column, around 54-74% of PCDD/F inputs into the reservoir were contributed by the catchment erosion during normal period. However, the PCDD/F input contributed by the enhanced catchment erosion significantly increased to 90% during intensive typhoon events.

Elevated concentrations of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans and polybrominated diphenyl ethers in hair from workers at an electronic waste recycling facility in eastern China

Hair samples collected from e-waste recycling workers (n=23 males, n=4 females) were analyzed to assess occupational exposures to polybrominated diphenyl ethers (PBDEs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) at a large e-waste recycling facility in Taizhou, eastern China. Hair samples from a reference population composed of residents of Shanghai (n=11) were analyzed for comparison. The mean concentration of ∑PBDEs (range, 22.8-1020 ng/g dw; mean, 157 ng/g dw) found in hair samples from e-waste recycling workers was approximately 3 times higher than the mean determined for the reference samples. The congener profiles of PBDEs in hair from e-waste recycling workers were dominated by BDE 209, whereas the profiles in the reference-population samples showed comparable levels of BDE 47 and BDE 209. Total PCDD/F concentrations in hair from e-waste workers (range, 126-5820 pg/g dw; mean, 1670 pg/g dw) were approximately 18-fold greater than the concentrations measured in hair from the reference population. Concentrations of PCDFs were greater than concentrations of PCDDs, in all of the hair samples analyzed (samples from e-waste and non-e-waste sites). Tetrachlorodibenzofurans (TCDFs) were the major homologues in hair samples. Overall, e-waste recycling workers had elevated concentrations of both PBDEs and PCDD/Fs, indicating that they are exposed to high levels of multiple persistent organic pollutants.

Heavy metal contamination in soils and vegetables near an e-waste processing site, South China

Environmental pollution due to uncontrolled e-waste recycling activities has been reported in a number of locations of China. In the present study, metal pollution to the surrounding environment from a primitive e-waste processing facility was investigated. Soils at sites where e-waste is burned in the open air, those of surrounding paddy fields and vegetable gardens, as well as common vegetable samples were collected and analyzed for heavy metals. The results showed that the soils of former incineration sites had the highest concentrations of Cd, Cu, Pb, and Zn with mean values of 17.1, 11,140, 4500, and 3690 mg kg(-1), respectively. The soils of nearby paddy fields and vegetable gardens also had relatively high concentrations of Cd and Cu. In the edible tissues of vegetables, the concentrations of Cd and Pb in most samples exceeded the maximum level permitted for food in China. Sequential leaching tests revealed that the Cu, Pb, and Zn were predominantly associated with the residual fraction, followed by the carbonate/specifically adsorbed phases with the exception of Cd, which was mainly in the extractable form in paddy fields and vegetable soils. The data showed that uncontrolled e-waste processing operations caused serious pollution to local soils and vegetables. The cleaning up of former incineration sites should be a priority in any future remediation program.

Spatial distribution of polychlorinated biphenyls (PCBs) and polybrominated biphenyl ethers (PBDEs) in an e-waste dismantling region in Southeast China: Use of apple snail (Ampullariidae) as a bioindicator

Fengjiang is a large e-waste dismantling site located in southeast China. In this paper, apple snail and soil samples were collected from this e-waste dismantling site and 25 vicinal towns to investigate the contamination status, spatial distributions and congener patterns of polychlorinated biphenyls (PCBs) and polybrominated biphenyl ethers (PBDEs). Total PCB concentrations in apple snails (3.78-1812ngg(-1) dry weight (dw)) were significant higher than that in soil samples (0.48-90.1ngg(-1) dw). PBDE (excluding BDE 209) concentrations in apple snail and soil samples ranged from 0.09 to 27.7ngg(-1) dw and 0.06 to 31.2ngg(-1) dw, respectively. Concentrations of PCBs and PBDEs in snails and soils correlated negatively with the distance from Fengjiang. Both the concentrations and profiles of the pollutants were significantly correlated (p<0.05) between the snail and soil samples, indicating the suitability of apple snail as a reliable bioindicator for PCBs and PBDEs contamination in this region. Relatively high concentrations of PCBs and PBDEs at locations far from e-waste dismantling sites implied that these pollutants have been transported to surrounding regions.

Chemical hazards associated with treatment of waste electrical and electronic equipment

This review paper summarizes the existing knowledge on the chemical hazards associated with recycling and other end-of-life treatment options of waste electrical and electronic equipment (e-waste). The hazards arise from the presence of heavy metals (e.g., mercury, cadmium, lead, etc.), flame retardants (e.g., pentabromophenol, polybrominated diphenyl ethers (PBDEs), tetrabromobisphenol-A (TBBPA), etc.) and other potentially harmful substances in e-waste. If improperly managed, the substances may pose significant human and environmental health risks. The review describes the potentially hazardous content of e-waste, examines the existing e-waste management practices and presents scientific data on human exposure to chemicals, workplace and environmental pollution associated with the three major e-waste management options, i.e., recycling, incineration and landfilling. The existing e-waste management practices and associated hazards are reviewed separately for developed and developing countries. Finally, based on this review, the paper identifies gaps in the existing knowledge and makes some recommendations for future research.

Characteristics of air pollution by polychlorinated dibenzo-p-dioxins and dibenzofurans in the typical industrial areas of Tangshan City, China

The ambient air in vicinity of different industrial sources for PCDD/PCDFs was sampled by TSP/PM10 active samplers and passive PUF disk samplers in Tangshan City, a metropolis containing clusters of various industrial plants. The TEQ concentrations of PCDD/PCDFs ranged from 44.2 to 394.1 fg I-TEQ/m3 with an average of 169.9 fg I-TEQ/m3. 2,3,4,7,8-PeCDF was the dominant contributor to sigma TEQ, contributing 41% (12% to 55%), while 1,2,3,4,6,7,8-HpCDF, OCDD and OCDF were the major congeners for the total concentrations. The ratios of sigma PCDF/ sigma PCDD reached 2.54 on average, suggesting that de novo synthesis in thermal processes played an important role to the airborne pollution of PCDD/PCDFs. The similarities congener profiles indicated that TSP and PM10 active sampling methods are comparable for the determination of the PCDD/PCDFs in ambient air, and the ratios of concentrations determined by the two methods suggested that the PCDD/PCDFs tended to stay in fine particles. It was found that 2,3,7,8-TCDF and OCDD were the dominating congeners in the passive PUF disks samples. Through principal components analysis, the coke industry was suggested to be a relatively high potential emission source for PCDD/PCDFs in the ambient air of Tangshan, which was possibly formed by de novo synthesis mechanism. In this study, the atmospheric impacts to the environment from different industrial sources could be ranked as follows (from high to low): coking, iron sintering, steel making, power generation and chlorinate alkali chemical production industries.

Dietary exposure to PCBs based on food consumption survey and food basket analysis at Taizhou, China--the world's major site for recycling transformers

The levels of PCBs in different types of food (fish, shellfish, meat, rice, vegetables, and fruits) were analyzed to determine the dietary intake of 37 PCBs for local residents and e-waste workers (all lactating mothers) at Taizhou (China), a major electronic waste scrapping center, in particular for recycling transformers. The exposure to PCBs through dietary intake in Taizhou was estimated at 92.79 ngkg(-1)d(-1), contributed by consumption of freshwater fish (28%), rice (28%), meat (17%), shellfish (9%), vegetables (8%), egg (4%) and marine fish (2%). With regards to WHO-PCB-TEQ values, freshwater fish (40%), shellfish (24%), duck liver (18%) and rice (12%) were the main dietary sources with total daily intake (9.78 pg WHO-PCB-TEQ kg(-1)d(-1)), exceeding the FAO/WHO Tolerable Daily Intake (70 pg TEQkg(-1)body(-1)wt(-1)month(-1)).

Levels and isomer profiles of Dechlorane Plus in the surface soils from e-waste recycling areas and industrial areas in South China

Dechlorane Plus (DP) is a highly chlorinated flame retardant. Levels of DP were measured in surface soils from e-waste recycling areas and industrial areas in South China. Higher DP levels were found in e-waste recycling areas (undetectable-47.4 ng/g) than those in industrial areas (0.0336-4.65 ng/g) in South China. The highest DP concentration (3327 ng/g) was found at the e-waste recycling site in Qingyuan, while DP levels fell dramatically with increasing distance away from the recycling site, suggesting that the e-waste recycling activities are an important source of DP emissions. The mean ratios of anti-DP to total DP (fanti) for different sampling areas ranged from 0.58 to 0.76 and showed no significant difference from the ratio for the technical DP products (t-test, p>0.05). Further intensive studies are needed to investigate the process of DP degradation and its degradation products.

Occurrence and characteristics of polybrominated dibenzo-p-dioxins and dibenzofurans in stack gas emissions from industrial thermal processes

The occurrence and characteristics of 2,3,7,8-substituted polybrominated and polychlorinated dibenzo-p-dioxins and dibenzofurans (PBDD/F and PCDD/F) from various combustion and metallurgic industrial thermal processes were investigated. PBDD/F levels from metallurgic processes (TEQ) concentrations from 0.14 to 1.5 ng Nm(-3), mass concentrations from 0.56 to 5.8 ng Nm(-3)) were markedly higher than those from combustion processes (TEQ) concentrations from 0.010 to 0.054 ng Nm(-3), mass concentrations from 0.025 to 0.15 ng Nm(-3)). This indicated that metallurgic processes could be important sources of PBDD/F. Consequently, more attention should be paid to the metallurgical emission sources in addition to combustion of brominated flame retardants (BFRs) and related products. Specific isomeric patterns for PCDD/F from various industrial sources were highly consistent, while PBDD/F patterns were not. This revealed that PCDD/F might form through a common mechanism such as de novo synthesis mechanism, while PBDD/F might form by different mechanisms in thermal processes such as precursor mechanisms. Finally, an approach to identify the PBDD/F sources in ambient air by using the PBDD/F to PCDD/F ratio was developed.

Electrostatic separation for recycling waste printed circuit board: a study on external factor and a robust design for optimization

Electrostatic separation is an effective and environmentally friendly method for recycling waste printed circuit board (PCB) by several kinds of electrostatic separators. However, some notable problems have been detected in its applications and cannot be efficiently resolved by optimizing the separation process. Instead of the separator itself, these problems are mainly caused by some external factors such as the nonconductive powder (NP) and the superficial moisture of feeding granule mixture. These problems finally lead to an inefficient separation. In the present research, the impacts of these external factors were investigated and a robust design was built to optimize the process and to weaken the adverse impact. A most robust parameter setting (25 kv, 80 rpm) was concluded from the experimental design. In addition, some theoretical methods, including cyclone separation, were presented to eliminate these problems substantially. This will contribute to efficient electrostatic separation of waste PCB and make remarkable progress for industrial applications.

Environmental and human exposure to persistent halogenated compounds derived from e-waste in China

Various classes of persistent halogenated compounds (PHCs) can be released into the environment due to improper handling and disposal of electronic waste (e-waste), which creates severe environmental problems and poses hazards to human health as well. In this review, polybrominated diphenyl ethers (PBDEs), polybrominated biphenyls (PBBs), tetrabromobisphenol A (TBBPA), polybrominated phenols (PBPs), polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs), and chlorinated polycyclic aromatic hydrocarbons (ClPAHs) are the main target contaminants for examination. As the world's largest importer and recycler of e-waste, China has been under tremendous pressure to deal with this huge e-waste situation. This review assesses the magnitude of the e-waste problems in China based on data obtained from the last several years, during which many significant investigations have been conducted. Comparative analyses of the concentrations of several classes of toxic compounds, in which e-waste recycling sites are compared with reference sites in China, have indicated that improper e-waste handling affects the environment of dismantling sites more than that of control sites. An assessment of the annual mass loadings of PBDEs, PBBs, TBBPA, PBPs, PCDD/Fs, and ClPAHs from e-waste in China has shown that PBDEs are the dominant components of PHCs in e-waste, followed by ClPAHs and PCDD/Fs. The annual loadings of PBDEs, ClPAHs, and PCDD/Fs emission were estimated to range from 76,200 to 182,000, 900 to 2,000 and 3 to 8 kg/year, respectively. However, PCDD/Fs and ClPAHs should not be neglected because they are also primarily released from e-waste recycling processes. Overall, the magnitude of human exposure to these toxics in e-waste sites in China is at the high end of the global range.

Distribution of polybrominated diphenyl ethers (PBDEs) and polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in municipal solid waste incinerators

The stack flue gases and the ashes in different units of two municipal solid waste incinerators (MSWIs) are sampled to investigate the characteristics of polybrominated diphenyl ethers (PBDEs), polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs), and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Bottom ashes (BA) exhibited much higher PBDD/F (8.11-52.2 pg TEQ/g) and PBDE contents (20.4-186 ng/g) than those of fly ashes (0.0932-2.02 pg TEQ/g and 0.332-25.5 ng/g), revealing that the PBDD/Fs and PBDEs in the feeding waste may not be completely destroyed. The PBDE concentrations/contents in the stack flue gases (26.1-109 ng/Nm(3)) and in the BA (20.4-186 ng/g) of the MSWIs could reach three orders higher than those in the atmosphere and reference soils. PBDE contributions to the environment from the stack flue gases or the reutilization of BA of MSWIs should not be ignored from the developing PBDE inventory.

PCDD/F measurement at a high-altitude station in Central Taiwan: evaluation of long-range transport of PCDD/Fs during the Southeast Asia biomass burning event

Recent biomass burning in Southeast Asia has raised global concerns over its adverse effects on visibility, human health, and global climate. The concentrations of total suspended particles (TSPs) and other vapor-phase pollutants (CO and ozone) were monitored at Lulin, an atmospheric background station in central Taiwan in 2008. To evaluate the long-range transport of persistent organic pollutants (POPs) during the Southeast Asia biomass burning event, the atmospheric polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were also measured at Lulin station. The atmospheric PCDD/F and TSP concentrations measured at Lulin station ranged from 0.71-3.41 fg I-TEQ/m(3) and 5.32-55.6 microg/m(3), respectively, during the regular sampling periods. However, significantly higher concentrations of PCDD/Fs, TSPs, CO, and ozone were measured during the spring season. These high concentrations could be the result of long-range transport of the products of Southeast Asia biomass burning. During the Southeast Asia biomass burning event (March 18-24, 2008), an intensive observation program was also carried out at the same station. The results of this observation program indicated that the atmospheric PCDD/F concentration increased dramatically from 2.33 to 390 fg I-TEQ/m(3) (March 19, 2008). The trace gas (CO) of biomass burning also significantly increased to 232 ppb during the same period, while the particle-bound PCDD/Fs in the TSP increased from 28.7 to 109 pg I-TEQ/g-TSP at Lulin station during the burning event. We conclude that there was a significant increase in the PCDD/F concentration in ambient air at a high-altitude background station in central Taiwan during the Southeast Asia biomass burning event.

In utero and lactational exposure to low doses of chlorinated and brominated dioxins induces deficits in the fear memory of male mice

Environmental-level in utero and lactational exposures to dioxins have been considered to affect brain functions of offspring. Here, we determined whether in utero and lactational exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and 2,3,7,8-tetrabromodibenzo-p-dioxin (TBDD), at the dose that does not harm the dams, affects the acquisition and retention of fear memory in mouse offspring. Pregnant C57BL/6J mice were administered by gavages TCDD or TBDD at a dose of 0 or 3.0 microg/kg body weight on gestation day 12.5, and their male offspring were examined for their behavior in adulthood. In the fear conditioning, a paired presentation of tone and foot shock was repeated three times, and retention tests for contextual and auditory fear memory were carried out 1 and 24h after the fear conditioning. Groups of mice that were exposed to TCDD and TBDD in utero and via lactation showed deficits in the contextual and auditory retention tests at 1 and 24h retention intervals. The present results suggest that maternal exposure to a low dose of TCDD or TBDD disrupts the functions of memory and emotion in male mouse offspring, and that the developmental toxicities of these chemicals are similar to each other.

PCDD/F, PBDD/F, and PBDE emissions from open burning of a residential waste dump

This work reports on the first known field study determining emission factors for polychlorinated and polybrominated dibenzodioxins/dibenzofurans (P[C/B]DDs/Fs) and polybrominated diphenyl ethers (PBDEs) from open burning of domestic waste. Two burning waste dump sites in Mexico were sampled using high-volume samplers mounted to a mobile sampling boom. Concurrent measurements of CO and CO(2) allowed determination of emission factors via the carbon balance method. PCDD/F emission factors averaged 823 ng toxic equivalency (TEQ)/kg C(burned) (N = 8, 68% relative standard deviation, RSD), a value at least five times higher than those from previous tests with domestic waste burned in barrels and approximately 2000 times higher than those from stacks of modern municipal waste combustors. These emission factors appear to be related to combustion quality, as conditions conducive to smoldering combustion, rather than flaming combustion, resulted in higher emission factors. Emissions of 40 PBDE congeners, likely originating from brominated flame retardants, averaged 724 mug/kg C(burned) (RSD = 96%) and had congener patterns similar to those of reported atmospheric sampling. Emissions of PBDDs/Fs were similar in magnitude to their chlorinated counterparts, averaging 470 ng TEQ/kg C(burned) (RSD = 105%), and may originate as reaction products of PBDE combustion or as thermally desorbed impurities from the PBDE flame retardant.

Analysis of POPs in human samples reveal a contribution of brominated dioxin of up to 15% of the total dioxin TEQ

Polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) were analyzed in both human adipose tissue and plasma from nine individuals, from the Swedish general population, using high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS). In addition, several other persistent organic pollutants (POPs) were determined in the same samples, including polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and perfluorinated chemicals (PFCs). Polybrominated dibenzofurans were detected in all of the human adipose tissue samples confirming their presence in the Swedish population. The highest concentration was found for 2,3,7,8-TeBDF, ranging from 0.27 to 2.4 pg g(-1) lipid, followed by 1,2,3,7,8-PeBDF, 0.23-0.89pgg(-1) lipid, 2,3,4,7,8-PeBDF, 0.44-0.54 pg g(-1) lipid, and 2,7/2,8-DiBDF, 0.19-0.30 pg g(-1) lipid. No PBDDs could be detected above the limit of detection (<0.02-<0.21 pg g(-1) lipid) in any of the samples. The levels of PCDD/Fs were in the range 1.79-31.5pg toxic equivalents (TEQ)g(-1) lipid, and PBDEs were found in the 1.16-7.46 ng g(-1) lipid range. The measured chlorinated dioxins indicate decreasing human concentrations in Sweden. The toxicity equivalents (TEQ) for PBDD/Fs (0.2-0.8 pg TEQg(-1) lipid) were found to contribute 1-15% of the total dioxin TEQ of the chlorinated dioxins and furans (5-18 pg TEQg(-1) lipid) depending on the individual. Also PBDEs concentrations are decreasing compared to 1997-2000, but most noteworthy a shift in BDE pattern where BDE#47 is surpassed by BDE#153. The levels of PFCs are in the same range as the highest levels of the traditional POPs (sum of 60 PCBs) based on volume. These findings illustrate the importance of continuous monitoring of brominated compounds in both human and the environment.

E-waste: an assessment of global production and environmental impacts

E-waste comprises discarded electronic appliances, of which computers and mobile telephones are disproportionately abundant because of their short lifespan. The current global production of E-waste is estimated to be 20-25 million tonnes per year, with most E-waste being produced in Europe, the United States and Australasia. China, Eastern Europe and Latin America will become major E-waste producers in the next ten years. Miniaturisation and the development of more efficient cloud computing networks, where computing services are delivered over the internet from remote locations, may offset the increase in E-waste production from global economic growth and the development of pervasive new technologies. E-waste contains valuable metals (Cu, platinum group) as well as potential environmental contaminants, especially Pb, Sb, Hg, Cd, Ni, polybrominated diphenyl ethers (PBDEs), and polychlorinated biphenyls (PCBs). Burning E-waste may generate dioxins, furans, polycyclic aromatic hydrocarbons (PAHs), polyhalogenated aromatic hydrocarbons (PHAHs), and hydrogen chloride. The chemical composition of E-waste changes with the development of new technologies and pressure from environmental organisations on electronics companies to find alternatives to environmentally damaging materials. Most E-waste is disposed in landfills. Effective reprocessing technology, which recovers the valuable materials with minimal environmental impact, is expensive. Consequently, although illegal under the Basel Convention, rich countries export an unknown quantity of E-waste to poor countries, where recycling techniques include burning and dissolution in strong acids with few measures to protect human health and the environment. Such reprocessing initially results in extreme localised contamination followed by migration of the contaminants into receiving waters and food chains. E-waste workers suffer negative health effects through skin contact and inhalation, while the wider community are exposed to the contaminants through smoke, dust, drinking water and food. There is evidence that E-waste associated contaminants may be present in some agricultural or manufactured products for export.

Patterns and sources of PCDD/Fs and dioxin-like PCBs in surface sediments from the East River, China

The contamination status of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) was preliminarily investigated in surface sediments collected from the East River during April 2007. The contamination levels of PCDD/Fs and DL-PCBs ranged from 2.1 to 9.8 with mean concentration of 4.5 pg WHO(98)-TEQ g(-1) and ranged from 0.042 to 0.45 with mean concentration of 0.19 pg WHO(98)-TEQ g(-1), respectively. All sediments were characterized by the elevated levels of PCDDs, especially OCDD. Higher concentrations of PCDD/Fs were found in the sediments from Guangzhou and Dongguan. Source analysis revealed that PCDD/Fs in the sediments from Guangzhou were mainly from the secondary copper smelters and steel-making plants, and PCDD/Fs in the sediment from Dongguan were mainly from MSWIs. PCP and paper mills were unlikely to be the main sources.