Crystalline Dioxin-Linked Covalent Organic Frameworks from Irreversible Reactions

Fabrication of synergistic sites on an oxygen-rich covalent organic framework for efficient removal of Cd(II) and Pb(II) from water

A key matter in heavy metal removal technology is to develop the adsorbents with efficient adsorption sites. In this study, an oxygen-rich covalent organic framework (JUC-505) was functionalized by carboxyl (-COOH) groups to form synergetic effects aiming for the removal of Cd(II) and Pb(II) ions. JUC-505-COOH shows a high Cd(II) uptake of 504 mg⋅g^-1 surpassing most of the reported porous adsorbents. Meanwhile, the kinetics study shows a rapid adsorption process at a high initial concentration (100 mg⋅L^-1), and the equilibrium can be reached within 5 min. We investigated the adsorption mechanism in-depth by density functional theory calculations, proving the synergistic effects of surface complexation and hydrogen-bond, which are from the post-modified -COOH groups and the in-situ oxygen atoms of JUC-505, respectively. Moreover, under the interference of common ions in natural water, the removal efficiency of Cd(II) is almost insusceptible, which sheds lights on the potential for the application in the natural water purification. In addition, the Pb(II) uptake (559 mg⋅g^-1) and the adsorption kinetics also surpass most of the reported porous adsorbents.

Piperazine-Linked Covalent Organic Frameworks with High Electrical Conductivity

A new kind of piperazine-linked covalent organic framework (COF) was synthesized through the nucleophilic substitution reaction between octaminophthalocyanines and hexadecafluorophthalocyanines. The two-dimensional (2D) frameworks are in tetragonally shaped polygon sheets, which stack in an AA stacking mode to constitute periodically ordered metallophthalocyanine columns and one-dimensional (1D) microporous channels. The piperazine-linked COFs exhibit excellent chemical stability and permanent porosity. By virtue of the neatly arrayed phthalocyanine columns and inbuilt cationic radicals, the piperazine-linked frameworks are highly conductive. The conductivity values of NiPc-NH-CoPcF₈ COF reached up to 2.72 and 12.7 S m^-1 for pellet and film samples, respectively. Moreover, this p-type conductive COF exhibited a high carrier mobility of 35.4 cm² V^-1 s^-1. Both the electric conductivity and carrier mobility set new records for conductive COFs.

Constructing Stable Chromenoquinoline-Based Covalent Organic Frameworks via Intramolecular Povarov Reaction

Chemically stable chromenoquinoline (CQ)-based covalent organic frameworks (COFs) were constructed by postsynthetic conversion of imine COFs. The key step of an intramolecular Povarov reaction can transform a preintegrated alkyne group to bridge the benzene rings on both sides of the imine linkage via chemical bonds, affording a ladder-type CQ linkage. This novel approach achieves a high cyclization degree of 80-90%, which endows the CQ-COFs with excellent chemical stability toward strong acid, base, and redox reagents. The synthetic approach can be applied to various monomers with different symmetries and functional core moieties. The absorption and fluorescence intensities of CQ-COFs are sensitive to acid, which allows for dual-mode sensing of strongly acidic environments.

Irreversible synthesis of an ultrastrong two-dimensional polymeric material

Polymers that extend covalently in two dimensions have attracted recent attention^1,2 as a means of combining the mechanical strength and in-plane energy conduction of conventional two-dimensional (2D) materials^3,4 with the low densities, synthetic processability and organic composition of their one-dimensional counterparts. Efforts so far have proven successful in forms that do not allow full realization of these properties, such as polymerization at flat interfaces^5,6 or fixation of monomers in immobilized lattices^7-9. Another frequently employed synthetic approach is to introduce microscopic reversibility, at the cost of bond stability, to achieve 2D crystals after extensive error correction^10,11. Here we demonstrate a homogenous 2D irreversible polycondensation that results in a covalently bonded 2D polymeric material that is chemically stable and highly processable. Further processing yields highly oriented, free-standing films that have a 2D elastic modulus and yield strength of 12.7 ± 3.8 gigapascals and 488 ± 57 megapascals, respectively. This synthetic route provides opportunities for 2D materials in applications ranging from composite structures to barrier coating materials.

Polyarylether-Based 2D Covalent-Organic Frameworks with In-Plane D-A Structures and Tunable Energy Levels for Energy Storage

The robust fully conjugated covalent organic frameworks (COFs) are emerging as a novel type of semi-conductive COFs for optoelectronic and energy devices due to their controllable architectures and easily tunable the highest occupied molecular orbital (HOMO) and the lowest occupied molecular orbital (LUMO) levels. However, the carrier mobility of such materials is still beyond requirements due to limited π-conjugation. In this study, a series of new polyarylether-based COFs are rationally synthesized via a direct reaction between hexadecafluorophthalocyanine (electron acceptor) and octahydroxyphthalocyanine (electron donor). These COFs have typical crystalline layered structures, narrow band gaps as low as ≈0.65 eV and ultra-low resistance (1.31 × 10^-6 S cm^-1 ). Such COFs can be composed of two different metal-sites and contribute improved carrier mobility via layer-altered staking mode according to density functional theory calculation. Due to the narrow pore size of 1.4 nm and promising conductivity, such COFs and electrochemically exfoliated graphene based free-standing films are fabricated for in-plane micro-supercapacitors, which demonstrate excellent volumetric capacitances (28.1 F cm^-3 ) and excellent stability of 10 000 charge-discharge cycling in acidic electrolyte. This study provides a new approach toward dioxin-linked COFs with donor-acceptor structure and easily tunable energy levels for versatile energy storage and optoelectronic devices.

Hierarchical self-assembly into chiral nanostructures

One basic principle regulating self-assembly is associated with the asymmetry of constituent building blocks or packing models. Using asymmetry to manipulate molecular-level devices and hierarchical functional materials is a promising topic in materials sciences and supramolecular chemistry. Here, exemplified by recent major achievements in chiral hierarchical self-assembly, we show how chirality may be utilized in the design, construction and evolution of highly ordered and complex chiral nanostructures. We focus on how unique functions can be developed by the exploitation of chiral nanostructures instead of single basic units. Our perspective on the future prospects of chiral nanostructures via the hierarchical self-assembly strategy is also discussed.

Emerging porous organic polymers for biomedical applications

This review summarizes and discusses the recent progress in porous organic polymers for diverse biomedical applications such as drug delivery, biomacromolecule immobilization, phototherapy, biosensing, bioimaging, and antibacterial applications.

Covalent organic frameworks-based smart materials for mitigation of pharmaceutical pollutants from aqueous solution

Covalent organic frameworks (COFs) are an emergent group of crystalline porous materials that have gained incredible interest in recent years. With foreseeable controllable functionalities and structural configurations, the constructions and catalytic properties of these organic polymeric materials can be controlled to fabricate targeted materials. The specified monomer linkers and pre-designed architecture of COFs facilitate the post-synthetic modifications for introducing novel functions and useful properties. By virtue of inherent porosity, robust framework, well-ordered geometry, functionality, higher stability, and amenability to functionalization, COFs and COFs-based composites are regarded as prospective nanomaterials for environmental clean-up and remediation. This report spotlights the state-of-the-art advances and progress in COFs-based materials to efficiently mitigate pharmaceutical-based environmental pollutants from aqueous solutions. Synthesis approaches, structure, functionalization, and sustainability aspects of COFs are discussed. Moreover, the adsorptive and photocatalytic potential of COFs and their derived nanocomposites for removal and degradation of pharmaceuticals are thoroughly vetted. In addition to deciphering adsorption mechanism/isotherms, the stability, regeneratability and reproducibility are also delineated. Lastly, the outcomes are summed up, and new directions are proposed to widen the promise of COF-based smart materials in diverse fields.

Metal–organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C–H bond activation and functionalization reactions

The review summarizes the state-of-the-art of C–H active transformations over crystalline and amorphous porous materials as new emerging heterogeneous (photo)catalysts.

Effect of the Thermal Treatment of Fe/N/C Catalysts for the Oxygen Reduction Reaction Synthesized by Pyrolysis of Covalent Organic Frameworks

A nitrogen-containing covalent organic framework obtained from the polymerization of 1,3-dicyanobenzene has been used as a starting material for the synthesis of Fe/N/C catalysts for the oxygen reduction reaction (ORR). In this work we report the effect of the thermal treatments on the nature and catalytic properties of the catalysts obtained after the thermal treatments. After the first thermal treatment, the catalysts obtained contain metallic iron and iron carbide particles, along with a minority fraction of inorganic FeN_x sites. After acid leaching and a second thermal treatment, FeN_x sites remain in the catalysts, along with a minor fraction of graphite-wrapped Fe₃C particles. Both catalysts display high activity for the ORR, with the catalyst subjected to acid leaching and a second thermal treatment, 2HT-1,3DCB, displaying higher ORR activity and a lower production of H₂O₂. This observation suggests that iron particles, such as Fe₃C, display ORR activity but mainly toward the two-electron pathway. On the contrary, FeN_x ensembles promote the ORR via the four-electron pathway, that is, via H₂O formation.

Adsorptive remediation of environmental pollutants using magnetic hybrid materials as platform adsorbents

Effective separation and remediation of environmentally hazardous pollutants are burning areas of research because of a constant increase in environmental pollution problems. An extensive number of emerging contaminants in the environmental matrices result in serious health consequences in animals, humans, and plants, even at trace levels. Therefore, it is of paramount significance to quantify these undesirable pollutants, even at a very low concentration, from the natural environment. Magnetic solid-phase extraction (MSPE) has recently achieved huge attention because of its strong magnetic domain and easy separation through an external magnetic field compared with simple solid-phase extraction. Therefore, MSPE appeared the most promising technique for removing and pre-concentration of emerging pollutants at trace level. Compared to the normal solid-phase extraction, MSPE as magnetic hybrid adsorbents offers the unique advantages of distinct nanomaterials and magnetic hybrid materials. It can exhibit efficient dispersion and rapid recycling when applying to a very complex matrix. This review highlights the possible environmental applications of magnetic hybrid nanoscale materials as effective MSPE sorbents to remediate a diverse range of environmentally toxic pollutants. We believe this study tends to evoke a variety of research thrust that may lead to novel remediation approaches in the forthcoming years.

Two-Dimensional Polymers and Polymerizations

Synthetic chemists have developed robust methods to synthesize discrete molecules, linear and branched polymers, and disordered cross-linked networks. However, two-dimensional polymers (2DPs) prepared from designed monomers have been long missing from these capabilities, both as objects of chemical synthesis and in nature. Recently, new polymerization strategies and characterization methods have enabled the unambiguous realization of covalently linked macromolecular sheets. Here we review 2DPs and 2D polymerization methods. Three predominant 2D polymerization strategies have emerged to date, which produce 2DPs either as monolayers or multilayer assemblies. We discuss the fundamental understanding and scope of each of these approaches, including: the bond-forming reactions used, the synthetic diversity of 2DPs prepared, their multilayer stacking behaviors, nanoscale and mesoscale structures, and macroscale morphologies. Additionally, we describe the analytical tools currently available to characterize 2DPs in their various isolated forms. Finally, we review emergent 2DP properties and the potential applications of planar macromolecules. Throughout, we highlight achievements in 2D polymerization and identify opportunities for continued study.

Crystalline Covalent Organic Frameworks with Tailored Linkages for Photocatalytic H2 Evolution

Crystalline covalent organic frameworks (COFs) are porous polymeric semiconductors with network topologies, which are built from the integration of selected organic blocks with covalent bond linkages. They have shown great promise for artificial photosynthesis, owing to broad light harvesting, high crystallinity, and high carrier mobility. This Minireview introduces state-of-the-art COF photocatalysts based on different linkages and discusses the origin of photocatalytic activities for hydrogen evolution. Three typical COF photocatalysts, with linkages including imine (-C=N-), β-ketoenamine (O=C-C=C-NH-), and vinylene (-C=C-), are discussed with a particular focus on the advancements in synthetic methodologies and structural design, as well as photoelectronic properties that are relevant to photocatalytic performance. The Minireview is expected to elucidate their structure-property relationships and the way to design photoactive COFs with enhanced performances.

Stable Bimetallic Polyphthalocyanine Covalent Organic Frameworks as Superior Electrocatalysts

The development of highly stable covalent organic frameworks (COFs) is extremely compelling for their implementation in practical application. In this work, we rationally designed and synthesized new kinds of ultrastable bimetallic polyphthalocyanine COFs, which are constructed with the dioxin linkage through the nucleophilic aromatic substitution between octahydroxylphthalocyanine and hexadecafluorophthalocyanine. The resulting bimetallic CuPcF₈-CoPc-COF and CuPcF₈-CoNPc-COF exhibited strong robustness under harsh conditions. The eclipsed stacking mode of metallophthalocyanine units supplies a high-speed pathway for electron transfer. With these structural advantages, both COFs displayed considerable activity, selectivity, and stability toward electrocatalytic CO₂ reduction in an aqueous system. Notably, CuPcF₈-CoNPc-COF showed a faradaic efficiency of 97% and an exceptionally high turnover frequency of 2.87 s^-1, which is superior to most COF-based electrocatalysts. Furthermore, the catalytic mechanism was well demonstrated by using a theoretical calculation. This work not only expanded the variety of dioxin-linked COFs, but also constituted a new step toward their practical use in carbon cycle.

Chemically Stable Polyarylether-Based Metallophthalocyanine Frameworks with High Carrier Mobilities for Capacitive Energy Storage

Covalent organic frameworks (COFs) with efficient charge transport and exceptional chemical stability are emerging as an import class of semiconducting materials for opto-/electronic devices and energy-related applications. However, the limited synthetic chemistry to access such materials and the lack of mechanistic understanding of carrier mobility greatly hinder their practical applications. Herein, we report the synthesis of three chemically stable polyarylether-based metallophthalocyanine COFs (PAE-PcM, M = Cu, Ni, and Co) and facile in situ growth of their thin films on various substrates (i.e., SiO₂/Si, ITO, quartz) under solvothermal conditions. We show that PAE-PcM COFs thin films with van der Waals layered structures exhibit p-type semiconducting properties with the intrinsic mobility up to ∼19.4 cm² V^-1 s^-1 and 4 orders of magnitude of increase in conductivity for PAE-PcCu film (0.2 S m^-1) after iodine doping. Density functional theory calculations reveal that the carrier transport in the framework is anisotropic, with the out-of-plane hole transport along columnar stacked phthalocyanine more favorable. Furthermore, PAE-PcCo shows the redox behavior maximumly contributes ∼88.5% of its capacitance performance, giving rise to a high surface area normalized capacitance of ∼19 μF cm^-2. Overall, this work not only offers fundamental understandings of electronic properties of polyarylether-based 2D COFs but also paves the way for their energy-related applications.

Hollow tube covalent organic framework for syringe filter-based extraction of ultraviolet stabilizer in food contact materials

In this work, a novel hollow tube covalent organic framework constructed by cyclotricatechylene and tetrafluoroterephthalonitrile (CTC-TFPN-COF) with polyether bond was synthesized, and it was coated on filter membrane for extraction of ultraviolet stabilizer in migration from food contact materials. Since the monomers of the polymer were linked by polyether bond, the CTC-TFPN-COF exhibited strong chemical stability in severe conditions such as acid, alkali and various organic solvent. The excellent features of high porosity and robust structure endowed the CTC-TFPN-COF good candidate as adsorbent for extraction of ultraviolet stabilizer. Moreover, the CTC-TFPN-COF coated membranes were immobilized on syringe filter and coupled with multiple channel injection pump to realize high throughput sample pretreatment strategy. Subsequently, a sensitive analytical method for ultraviolet stabilizer was established followed by ultra-high performance liquid chromatography-tandem mass spectrometry. The flow rate of extraction and desorption, elution solvent and the volume of desorption solvent were optimized. The method was assessed, which showed wide linear ranges with R2 greater than 0.99, low limits of detection (0.9-91 ng L^-1) and low limits of quantification (3-300 ng L^-1). The developed method was successfully applied to determine trace ultraviolet stabilizer in the migration of food contact materials with different simulated solution, which demonstrated its promising potential in practical analysis.

Cobalt Coordinated Cyano Covalent-Organic Framework for High-Performance Potassium-Organic Batteries

Potassium ion batteries (PIBs) are expected to become the next large-scale energy storage candidates due to its low cost and abundant resources. And the covalent organic framework (COF), with designable periodic organic structure and ability to organize redox active groups predictably, has been considering as the promising organic electrode candidate for PIB. Herein, we report the facile synthesis of the cyano-COF with Co coordination via a facile microwave digestion reaction and its application in the high-energy potassium ion batteries for the first time. The obtained COF-Co material exhibits the enhanced π-π accumulation and abundant defects originated from the Co interaction with the two-dimensional layered sheet structure of COF, which are beneficial for its energy-storage application. Adopted as the inorganic-metal boosted organic electrode for PIBs, the COF-Co with Co coordination can promote the formation of the π-K⁺ interaction, which could lead to the activation of aromatic rings for potassium-ion storage. Besides, the porous two-dimensional layered structure of COF-Co with abundant defects can also promote the shortened diffusion distance of ion/electron with promoted K⁺ insertion/extraction ability. Enhanced cycling stability with large reversible capacity (371 mAh g^-1 after 400 cycles at 100 mA g^-1) and good rate properties (105 mAh g^-1 at 2000 mA g^-1) have been achieved for the COF-Co electrode.

Synthesis of Two-Dimensional C-C Bonded Truxene-Based Covalent Organic Frameworks by Irreversible Brønsted Acid-Catalyzed Aldol Cyclotrimerization

The synthesis of new C-C bonded two-dimensional (2D) covalent organic frameworks (COFs) is highly desirable. Here, a simple but effective synthetic strategy has been developed using an irreversible Brønsted acid-catalyzed aldol cyclotrimerization reaction by virtue of truxene as a linkage. Nonolefin C-C bonded 2D truxene-based covalent organic frameworks (Tru-COFs) were constructed by polymerization of 1,3,5-triindanonebenzene (TDB). The structure formation was confirmed by wide-angle X-ray scattering, Fourier-transform infrared spectroscopy, and solid-state ¹³C CP/MAS NMR. The results showed that the Tru-COFs were porous (645 m²/g) and chemically stable. Benzyl methylene in conjugated Tru-COFs more effectively produced photoinduced radicals than the model truxene compound. Due to the radical photoresponsiveness, Tru-COFs were efficient catalysts for photocatalytic oxidation of sulfides. We expect that this will provide a new synthetic methodology to obtain C-C bonded functional 2D COFs.

Bridged Aromatic Oxo- and Thioethers with Intense Emission in Solution and the Solid State

In this contribution, we report on a class of emitters based on bridged oxo- and/or thioethers revealing striking photoluminescence properties in fluid solution and in the solid state. In total, nine compounds were investigated concerning their photophysical properties, which were interpreted by quantum chemical calculations. To our delight, we discovered compounds possessing nearly identical photoluminescence quantum yields (ΦF ) in solution and in the solid state, which has been rarely reported so far. Besides these efforts, we shed light on the influence of polymorphism and solvent polarity on the emission properties. In addition, an in-depth X-ray diffractometric analysis was conducted to correlate molecular packing in the crystal with differences in the photophysical properties.

Band Gap Engineering in Vinylene-Linked Covalent Organic Frameworks for Enhanced Photocatalytic Degradation of Organic Contaminants and Disinfection of Bacteria

Photocatalysis is regarded as one of the most promising technologies to remove organic contaminants. At present, most of the covalent organic frameworks (COFs) used as photocatalysts are connected by imine or borate bonds, which have relatively low stability and relatively poor π-delocalization. Herein, we report, for the first time, vinylene-linked COFs constructed by various diacetylene and triazine moieties for photocatalytic degradation of organic contaminants and disinfection of bacteria. The pioneering introduction of diacetylene moieties not only enhances conjugated π-electrons delocalization but also optimizes the electronic band structures that significantly improve photocatalytic activity. Therefore, the vinylene-bridged COFs have excellent photocatalytic activity with ultrahigh stability and great π-electron delocalization, thus exhibiting ultrafast photocatalytic degradation efficiency for phenol and norfloxacin (>96%, within 15 min). Our work provides a strong basis for the rational regulation of the chemical structure of COFs to enhance their photocatalytic activity, thus broadening the application of COFs in photocatalysis.

Synthesis, Postsynthetic Modifications, and Applications of the First Quinoxaline-Based Covalent Organic Framework

We report a new synthetic protocol for preparing highly ordered two-dimensional nanoporous covalent organic frameworks (2D-COFs) based on a quinoxaline backbone. The quinoxaline framework represents a new type of COF that enables postsynthetic modification by placing two different chemical functionalities within the nanopores including layer-to-layer cross-linking. We also demonstrate that membranes fabricated using this new 2D-COF perform highly selective separations resulting in dramatic performance enhancement post cross-linking.

Donor-Acceptor Type Covalent Organic Frameworks

Intermolecular charge transfer (ICT) effect has been widely studied in both small molecules and linear polymers. Covalently-bonded donor-acceptor pairs with tunable bandgaps and photoelectric properties endow these materials with potential applications in optoelectronics, fluorescent bioimaging, and sensors, etc. However, owing to the lack of charge transfer pathway or effective separation of charge carriers, unfavorable charge recombination gives rise to inevitable energy loss. Covalent organic frameworks (COFs) can be mediated with various geometry- and property-tailored building blocks, where donor (D) and acceptor (A) segments are connected by covalent bonds and can be finely arranged to form highly ordered networks (namely D-A COFs). The unique structural features of D-A COFs render the formation of segregated D-A stacks, thus provides pathways and channels for effective charge carriers transport. This review highlights the significant progress on D-A COFs over the past decade with emphasis on design principles, growing structural diversities, and promising application potentials.

Arylamine-Linked 2D Covalent Organic Frameworks for Efficient Pseudocapacitive Energy Storage

The development of new linkages is one of the most efficient strategies to enrich the diversity of covalent organic frameworks (COFs). Particularly, functional linkages can endow COFs with additional tailored properties besides the building units, which further diversify COFs with desirable functions. Herein, we have developed a new arylamine linkage for the construction of COFs. Two new arylamine-linked COFs (AAm-TPB and AAm-Py) were prepared by condensing cost-effective dimethyl succinyl succinate (DMSS) with corresponding multitopic amines (TPB-NH₂ and Py-NH₂ ). Due to the abundant electroactive diphenylamine moieties in the COF skeletons resembling that of polyaniline (PANI), a state-of-the-art conductive polymer, the pseudocapacitive energy storage performance of AAm-TPB was further investigated. Remarkably, the AAm-TPB electrode exhibits a high capacitance of 271 F g^-1 with a three-electrode setup at a discharge rate of 1 A g^-1 , which represents one of the highest capacitances among the reported COF-based electrode materials.

Reticular design and crystal structure determination of covalent organic frameworks

Reticular chemistry of covalent organic frameworks (COFs) deals with the linking of discrete organic molecular building units into extended structures adopting various topologies by strong covalent bonds. The past decade has witnessed a rapid development of COF chemistry in terms of both structural diversity and applications. From the structural perspective, irrespective of our subject of concern with regard to COFs, it is inevitable to take into account the structural aspects of COFs in all dimensions from 1D ribbons to 3D frameworks, for which understanding the concepts of reticular chemistry, based mainly on 'reticular design', will seemingly lead to unlimited ways of exploring the exquisiteness of this advanced class of porous, extended, and crystalline materials. A comprehensive discussion and understanding of reticular design, therefore, is of paramount importance so that everyone willing to research on COFs can interpret well and chemically correlate the geometrical structures of this subset of reticular materials and their practical applications. This article lies at the heart of using the conceptual basis of reticular chemistry for designing, modeling, and determination of novel infinite and crystalline structures. Especially, the structure determinations are described by means of chronological advances of discoveries and development of COFs whereby their crystal structures are elucidated by modeling through the topological approach, 3D electron diffraction, single-crystal X-ray diffraction, and powder X-ray diffraction techniques.

Catalyst- and Solvent-Free Synthesis of a Chemically Stable Aza-Bridged Bis(phenanthroline) Macrocycle-Linked Covalent Organic Framework

Developing new linkage-based covalent organic frameworks (COFs) is one of the major topics in reticular chemistry. Electrically conductive COFs have enabled applications in energy storage and electrochemical catalysis, which are not feasible using insulating COFs. Despite significant advances, the construction of chemically stable conductive COFs by the formation of new linkages remains relatively unexplored and challenging. Here we report the solvent- and catalyst-free synthesis of a two-dimensional aza-bridged bis(phenanthroline) macrocycle-linked COF (ABBPM-COF) from the thermally induced poly-condensation of a tri-topic monomer and ammonia gas. The ABBPM-COF structure was elucidated using multiple techniques, including X-ray diffraction analysis combined with structural simulation, revealing its crystalline nature with an ABC stacking mode. Further experiments demonstrated its excellent chemical stability in acid/base solutions. Electrical-conductivity measurements showed that the insulating ABBPM-COF becomes a semiconducting material after exposure to iodine vapor.

Ether-linked porphyrin covalent organic framework with broadband optical switch

It is still a challenge to design and synthesize novel switchable optical materials with ultrafast nonlinear optical (NLO) response in a broad spectral range. These materials have exhibited great application potential in many high-technology fields such as biological imaging, chemical sensors, optical data storage, laser protection, and controllable intelligent and optoelectronic devices. By using porphyrins with highly delocalized 18 π-electron conjugated system as functional building blocks, the first ether-linked porphyrin covalent organic framework materials (COF-Pors) with highly ordered lattice structure have been successfully synthesized. In contrast to the starting porphyrins that only exhibit reverse saturable absorption (RSA) response at 532 nm, the as-prepared COF-Pors shows large NLO effect in a broad range from visible to near infrared. Upon laser illumination, COF-Pors exhibits typical saturable absorption (SA) effect at lower incident laser energy, and RSA response at higher pulse energy.

•

The first ether-linked porphyrin covalent organic framework (COF-Pors) was synthesized.

•

COF-Pors exhibits reversible intensity-dependent SA to RSA transition in DMF dispersions.

•

COF-Pors shows an NLO switching effect in a broad range from visible to near infrared.

•

COF-Pors exhibits SA at lower pulse energy and RSA at higher pulse energy.

Chemical Conversion and Locking of the Imine Linkage: Enhancing the Functionality of Covalent Organic Frameworks

Imine-based covalent organic frameworks (COFs) are a widely studied class of functional, crystalline, and porous nanostructures which combine a relatively facile crystallization with tuneable compositions and porosities. However, the imine linkage constitutes an intrinsic limitation due to its reduced stability in harsh chemical conditions and its unsuitability for in-plane π-conjugation in COFs. Urgent solutions are therefore required in order to exploit the full potential of these materials, thereby enabling their technological application in electronics, sensing, and energy storage devices. In this context, the advent of a new generation of linkages derived from the chemical conversion and locking of the imine bond represents a cornerstone for the synthesis of new COFs. A marked increase in the framework robustness is in fact often combined with the incorporation of novel functionalities including, for some of these reactions, an extension of the in-plane π-conjugation. This Minireview describes the most enlightening examples of one-pot reactions and post-synthetic modifications towards the chemical locking of the imine bond in COFs.

2D Redox-Active Covalent Organic Frameworks for Supercapacitors: Design, Synthesis, and Challenges

Due to the tunable skeletons, variable pore environments, and predesignable structures, covalent organic frameworks (COFs) can be served as a versatile platform to tailor redox activities for efficient energy storage. Redox-active COFs with specific functional groups can not only promote high-speed mass transport in the permanently open channels, but also provide dense active sites for reversible redox reactions so as to efficiently adsorb the electrolyte ions, thus becoming emerging and promising electroactive materials. This review summarizes the design principles and synthetic methods of redox-active COFs, with a focus on surveying the representative advances in supercapacitors. The key progress, major challenges, and future directions in this promising field are highlighted as well.

Recent Advances in Covalent Organic Frameworks for Heavy Metal Removal Applications

Covalent organic frameworks comprise a unique class of functional materials that has recently emerged as a versatile tool for energy-related, photocatalytic, environmental, and electrochromic device applications. A plethora of structures can be designed and implemented through a careful selection of ligands and functional units. On the other hand, porous materials for heavy metal absorption are constantly on the forefront of materials science due to the significant health issues that arise from the release of the latter to aquatic environments. In this critical review, we provide insights on the correlation between the structure of functional covalent organic frameworks and their heavy metal absorption. The elements we selected were Pb, Hg, Cr, Cd, and As metal ions, as well as radioactive elements, and we focused on their removal with functional networks. Finally, we outline their advantages and disadvantages compared to other competitive systems such as zeolites and metal organic frameworks (MOFs), we analyze the potential drawbacks for industrial scale applications, and we provide our outlook on the future of this emerging field.

Chemical kinetic mechanisms and scaling of two-dimensional polymers via irreversible solution-phase reactions

Two-dimensional (2D) polymers are extended networks of multi-functional repeating units that are covalently linked together but confined to a single plane. The past decade has witnessed a surge in interest and effort toward producing and utilizing 2D polymers. However, facile synthesis schemes suitable for mass production are yet to be realized. In addition, unifying theories to describe the 2D polymerization process, such as those for linear polymers, have not yet been established. Herein, we perform a chemical kinetic simulation to study the recent synthesis of 2D polymers in homogeneous solution with irreversible chemistry. We show that reaction sites for polymerization in 2D always scale unfavorably compared to 3D, growing as molecular weight to the 1/2 power vs 2/3 power for 3D. However, certain mechanisms can effectively suppress out-of-plane defect formation and subsequent 3D growth. We consider two such mechanisms, which we call bond-planarity and templated autocatalysis. In the first, although single bonds can easily rotate out-of-plane to render polymerization in 3D, some double-bond linkages prefer a planar configuration. In the second mechanism, stacked 2D plates may act as van der Waals templates for each other to enhance growth, which leads to an autocatalysis. When linkage reactions possess a 1000:1 selectivity (γ) for staying in plane vs rotating, solution-synthesized 2D polymers can have comparable size and yield with those synthesized from confined polymerization on a surface. Autocatalysis could achieve similar effects when self-templating accelerates 2D growth by a factor β of 10⁶. A combined strategy relaxes the requirement of both mechanisms by over one order of magnitude. We map the dependence of molecular weight and yield for the 2D polymer on the reaction parameters, allowing experimental results to be used to estimate β and γ. Our calculations show for the first time from theory the feasibility of producing two-dimensional polymers from irreversible polymerization in solution.

Imaging and analysis of covalent organic framework crystallites on a carbon surface: a nanocrystalline scaly COF/nanotube hybrid

Synthesis of covalent organic frameworks (COFs) is well-advanced but understanding their nanoscale structure and interaction with other materials remains a significant challenge. Here, we have developed a methodology for the detailed imaging and analysis of COF crystallites using carbon nanotube substrates for COF characterisation. Detailed investigation using powder X-ray diffraction, infrared spectroscopy, mass spectrometry and scanning electron microscopy in conjunction with a local probe method, transmission electron microscopy (TEM), revealed details of COF growth and nucleation at the nanoscale. A boronate ester COF undergoes preferential growth in the a-b crystallographic plane under solvothermal conditions. Carbon nanotubes were found to not impact the mode of COF growth, but the crystallites on nanotubes were smaller than COF crystallites not on supports. COF crystalline regions with sizes of tens of nanometres exhibited preferred orientation on nanotube surfaces, where the c-axis is oriented between 50 and 90° relative to the carbon surface. The COF/nanotube hybrid structure was found to be more complex than the previously suggested concentric core-shell model and can be better described as a nanocrystalline scaly COF/nanotube hybrid.

Low Band Gap Benzoxazole-Linked Covalent Organic Frameworks for Photo-Enhanced Targeted Uranium Recovery

The inherent features of covalent organic frameworks (COFs) make them highly attractive for uranium recovery applications. A key aspect yet to be explored is how to improve the selectivity and efficiency of COFs for recovering uranium from seawater. To achieve this goal, a series of robust and hydrophilic benzoxazole-based COFs is developed (denoted as Tp-DBD, Bd-DBD, and Hb-DBD) as efficient adsorbents for photo-enhanced targeted uranium recovery. Benefiting from the hydroxyl groups and the formation of benzoxazole rings, the hydrophilic Tp-DBD shows outstanding stability and chemical reduction properties. Meanwhile, the synergistic effect of the hydroxyl groups and the benzoxazole rings in the π-conjugated frameworks significantly decrease the optical band gap, and improve the affinity and capacity to uranium recovery. In seawater, the adsorption capacity of uranium is 19.2× that of vanadium, a main interfering metal in uranium extraction.

Covalent organic frameworks: an ideal platform for designing ordered materials and advanced applications

Covalent organic frameworks offer a molecular platform for integrating organic units into periodically ordered yet extended 2D and 3D polymers to create topologically well-defined polygonal lattices and built-in discrete micropores and/or mesopores.

Flexible thiourea linked covalent organic frameworks

Exploring covalent organic frameworks with new linkages is regarded as an efficient method to modulate the corresponding properties, and a new linkage is essential to the progress of this field.