Electrospun microfiber membranes embedded with drug-loaded clay nanotubes for sustained antimicrobial protection

A mechanically robust and flexible PEGylated poly(glycerol sebacate)/β-TCP nanoparticle composite membrane for guided bone regeneration

A PEGS/β-TCP composite membrane was fabricated by a simple prepolymer mixing-in situ crosslinking method for guided bone regeneration.

A facile one-step grafting of polyphosphonium onto halloysite nanotubes initiated by Ce(iv)

Polyphosphonium was facilely grafted onto HNTs in an aqueous phase by a one-step method initiated by Ce(iv) at a mild temperature.

Halloysite nanotubes as a nature's boon for biomedical applications

The arena of biomedical science has long been in quest of innovative mediums for diagnostic and therapeutic applications. The latest being the use of nanomaterials for such applications, thereby giving rise to the branch of nanomedicine. Halloysite nanotubes (HNTs) are naturally occurring tubular clay nanomaterials, made of aluminosilicate kaolin sheets rolled several times. The aluminol and siloxane groups on the surface of HNT facilitate the formation of hydrogen bonding with the biomaterials onto its surface. These properties render HNT pivotal in diverse range of applications, such as in environmental sciences, waste-water treatment, dye removal, nanoelectronics and fabrication of nanocomposites, catalytic studies, as glass coatings or anticorrosive coatings, in cosmetics, as flame retardants, stimuli response, and forensic sciences. The specific properties of HNT also lead to numerous applications in biomedicine and nanomedicine, namely drug delivery, gene delivery, tissue engineering, cancer and stem cells isolation, and bioimaging. In this review, recent developments in the use of HNT for various nanomedicinal applications have been discussed.

Chitosan-based asymmetric topological membranes with cell-like features for healthcare applications

Chitosan-based guided tissue regeneration (GTR) membranes are extensively used in orthopedic/stomatological regenerative medicine since chitosan shares many chemical and structural similarities with glycosaminoglycans (GAGs) in the extracellular matrix.

Surface modified halloysite nanotubes: A flexible interface for biological, environmental and catalytic applications

Halloysite Nanotubes (HNTs) are clay minerals that possess unique chemical composition and a tubular structure due to which, they have recently emerged as a potential nanomaterial for umpteen applications. Over the years, the myriad applications of HNT have been realized through the surface modification of HNT, which involves the modification of nanotube's inner lumen and the outer surface with different functional compounds. The presence of aluminum and silica groups on the inner and outer surface of HNT enhance the interfacial relationship of the nanotube with different functional agents. Compounds such as alkalis, organosilanes, polymers, compounds of biological origin, surfactants and nanomaterials have been used for the modification of the inner lumen and the outer surface of HNT. The strategies change the constitution of HNT's surface either through micro-disintegration of the surface or by introducing additional functional groups on the surface, which further enhances their potential to be used as a flexible interface for different applications. In this review, the different surface modification strategies of the outer surface and the inner lumen that have been employed over the years have been discussed. The biological, environmental and catalytic applications of these surface modified HNTs with such versatile interface in the past two years have been elaborately discussed as well.

Drug-Loaded Halloysite Nanotube-Reinforced Electrospun Alginate-Based Nanofibrous Scaffolds with Sustained Antimicrobial Protection

Halloysite nanotube (HNT)-reinforced alginate-based nanofibrous scaffolds were successfully fabricated by electrospinning to mimic the natural extracellular matrix (ECM) structure which is beneficial for tissue regeneration. An antiseptic drug, cephalexin (CEF)-loaded HNT, was incorporated into the alginate-based matrix to obtain sustained antimicrobial protection and robust mechanical properties, the key criteria for tissue engineering applications. Electron microscopic imaging and drug release studies revealed that CEF had penetrated into the lumen space of the HNT and also deposited on the outer walls, with a total loading capacity of 30 wt %. Moreover, the diameter of alginate-based nanofibers of the scaffolds ranged from 40 to 522 nm with well-aligned HNTs, resulting in superior mechanical properties. For instance, the addition of 5% (w/w) HNT improved the tensile strength (σ) and elastic modulus by 3-fold and 2-fold, respectively, compared to those of the alginate-based scaffolds without HNT. The fabricated scaffolds exhibited remarkable antimicrobial properties against both Gram-negative and Gram-positive bacteria, and the cytotoxicity studies confirmed the nontoxicity of the fabricated scaffolds. Drug release kinetics showed that CEF inside HNTs diffuses within 24 h and that the diffusion of the drug is delayed by 7 days once the CEF-loaded HNTs are incorporated into the alginate-based nanofibers. These fabricated alginate-based electrospun scaffolds with enhanced mechanical properties and sustained antimicrobial protection hold great potential to be used as artificial ECM scaffolds for tissue engineering applications.

Icariin-loaded electrospun PCL/gelatin sub-microfiber mat for preventing epidural adhesions after laminectomy

BACKGROUND

Epidural adhesion is one of the major reasons attributed to failed back surgery syndrome after a successful laminectomy, and results in serious clinical complications which require management from physicians. Therefore, there is an urgent demand within the field to develop biodegradable anti-adhesion membranes for the prevention of post-operative adhesion.

METHODS

In this study, icariin (ICA) was initially loaded into polycaprolactone (PCL)/gelatin fibers via electrospinning to fabricate nanofibrous membranes. The effects of the ICA content (0.5wt%, 2wt% and 5wt%) and the bioactivity of ICA in the nanofibrous membranes were investigated in vitro and in vivo.

RESULTS

The nanofibrous membranes showed suitable pore size and good properties that were unaffected by ICA concentration. Moreover, the ICA-loaded membranes exhibited an originally rapid and subsequently gradual sustained ICA release profile that could significantly prevent fibroblast adhesion and proliferation. In vivo studies with rabbit laminectomy models demonstrated that the ICA-loaded membranes effectively reduced epidural adhesion by gross observation, histology, and biochemical evaluation. The anti-adhesion mechanism of ICA was found to be via suppression of the TGF-β/Smad signaling proteins and down regulation of collage I/III and a-SMA expression for the first time.

CONCLUSION

We believe that these ICA-loaded PCL/gelatin electrospun membranes provide a novel and promising strategy to resist adhesion formation following laminectomy in a clinical application.

Halloysite clay nanotubes for life sciences applications: From drug encapsulation to bioscaffold

Natural forming clay halloysite is an emerging nanomaterial carrier for sustained drug delivery. These 50 nm diameter aluminosilicate tubes, with inner - alumina and outer - silica surface layers, can be loaded with 10-30 wt% of drug molecules, DNA and enzymes. The opposite charge of the inner and outer halloysite surface allow for selective drug adsorption inside or outside the clay nanotubes. The drug loaded halloysite enhanced the zeta potential of minus 50-60 mV allowing for stable aqueous nanocolloids. Halloysite nanoformulations provide an extended 10-20 h release profile, and may be functionalized (e.g., clogging tubes' end with polymers extending release time to 1-2 weeks or allowing for triggered release), which renders these clay nanostructures as promising controlled delivery systems. Recent studies demonstrate the potential of abundantly available halloysite clay nanotubes for life science applications, from drug delivery via oral or topical administration, to tissue scaffolds and regenerative medicine, while assessing their cellular internalization, stability, biosafety and biocompatibility are featured. The benefits and limitations of halloysite clay nanotubes are discussed, as well as the directions for future developments.

pH/NIR-Responsive Polypyrrole-Functionalized Fibrous Localized Drug-Delivery Platform for Synergistic Cancer Therapy

Localized drug-delivery systems (LDDSs) are a promising approach for cancer treatment because they decrease systematic toxicity and enhance the therapeutic effect of the drugs via site-specific delivery of active compounds and possible gradual release. However, the development of LDDS with rationally controlled drug release and intelligent functionality holds great challenge. To this end, we have developed a tailorable fibrous site-specific drug-delivery platform functionalized with pH- and near-infrared (NIR)-responsive polypyrrole (PPy), with the aim of cancer treatment via a combination of photothermal ablation and chemotherapy. First, a paclitaxel (PTX)-loaded polycaprolactone (PCL) (PCL-PTX) mat was prepared by electrospinning and subsequently in situ membrane surface-functionalized with different concentrations of PPy. The obtained PPy-functionalized mats exhibited excellent photostability and heating property in response to NIR exposure. PPy-coated mats exhibited enhanced PTX release in a pH 5.5 environment compared to pH 7.4. Release was further accelerated in response to NIR under both conditions; however, superior release was observed at pH 5.5 compared to pH 7.4, indicating a dual stimuli-responsive (pH and NIR) drug-delivery platform. More importantly, the 808 nm NIR irradiation enabled markedly accelerated PTX release from PPy-coated PCL-PTX mats and slowed and sustained release following termination of laser irradiation, confirming representative stepwise drug-release properties. PPy-coated PCL-PTX mats presented significantly enhanced in vitro and in vivo anticancer efficacy under NIR irradiation compared to PPy-coated PCL-PTX mats not exposed to NIR or uncoated mats (PCL-PTX). This study has thus developed a promising fibrous site-specific drug-delivery platform with NIR- and pH-triggering that notably utilizes PPy as a dopant for synergistic photothermal chemotherapy.

Icariin-loaded electrospun PCL/gelatin nanofiber membrane as potential artificial periosteum

Due to the significant role of the periosteum in bone regeneration, we hypothesised that using a specially engineered artificial periosteum could lead to an enhancement in osteogenesis in bone grafts. Herein, we describe our work aimed at fabricating an electrospun fibrous membrane as an artificial periosteum that exhibits flexibility, permeability and osteoinduction. This membrane was designed to cover the complex surface of bone grafts to facilitate and accelerate bone regeneration. The traditional Chinese medicine icariin (ICA) was subsequently introduced into poly (ε-caprolactone) (PCL) /gelatin nanofibers to fabricate an artificial periosteum for the first time. The effects of ICA content on morphology, physical properties, drug release profile, in vitro degradability, biocompatibility and osteogenic differentiation properties were investigated. The ICA-loaded electrospun membranes showed significant improvement in hydrophilicity, high mechanical strength, appropriate degradation rates and excellent biocompatibility. Furthermore, clear enhancement in alkaline phosphatase (ALP) activity, as well as an increase in osteocalcin (OCN) and type collagen I (COL I) expression in MC3T3-E1 cells were detected. Furthermore, we observed clear calcium deposition content in MC3T3-E1 cells cultured on ICA-loaded fibrous matrix. The membrane loaded with 0.05 wt.% ICA displayed properties contributing to cell attachment, proliferation and differentiation. These results indicate the huge potential of this ICA-loaded PCL/gelatin electrospun membrane as a biomimetic artificial periosteum to accelerate bone regeneration.

Chemical modification of halloysite nanotubes for controlled loading and release

Clay minerals have been used for medical purposes from ancient times. Among them, the halloysite nanotube, an aluminosilicate of the kaolin group, is an emerging nanomaterial which possesses peculiar chemical characteristics. By means of suitable modifications, such as supramolecular functionalization or covalent modifications, it is possible to obtain novel nanomaterials with tunable properties for several applications. In this context the covalent grafting of suitable organic moieties on the external surface or in the halloysite lumen has been exploited to improve the loading and release of several biologically active molecules. The resulting hybrid nanomaterials have been applied as drug carrier and delivery systems, as fillers for hydrogels, in tissue regeneration and in the gene delivery field. Furthermore the loading and release of specific molecules have been also investigated for environmental purposes. This review summarizes the main developments in the halloysite modifications in the last 20 years with a particular attention to the development in the past two years.

Electrospun poly(lactic acid) fibers containing novel chlorhexidine particles with sustained antibacterial activity

The treatment of persistent infections often requires a high local drug concentration and sustained release of antimicrobial agents. This paper proposes the use of novel electrospinning of poly(lactic acid) (PLA) fibers containing uncoated and encapsulated chlorhexidine particles. Chlorhexidine particles with a mean (SD) diameter of 17.15 ± 1.99 μm were fabricated by the precipitation of chlorhexidine diacetate with calcium chloride. Layer-by-layer (LbL) encapsulation of the chlorhexidine particles was carried out to produce encapsulated particles. The chlorhexidine particles had a high chlorhexidine content (90%), and when they were electrospun into PLA fibers a bead-in-string structure was obtained. The chlorhexidine content in the fibers could be tuned and a sustained release over 650 h was produced, via chlorhexidine particle encapsulation. Chlorhexidine release was governed by the polyelectrolyte multilayer encapsulation as demonstrated by SEM and confocal imaging. The incorporation of uncoated and encapsulated chlorhexidine particles (0.5% and 1% wt/wt chlorhexidine) into the fibers did not cause toxicity to healthy fibroblasts or affect cell adhesion to the fibers over a period of 5 days. The chlorhexidine-containing fibers also demonstrated sustained antibacterial activity against E. coli via an agar diffusion assay and broth transfer assay. Therefore, the chlorhexidine-containing PLA fibers may be useful in the treatment of persistent infections in medicine and dentistry.

Antimicrobial gelatin-based elastomer nanocomposite membrane loaded with ciprofloxacin and polymyxin B sulfate in halloysite nanotubes for wound dressing

Bacterial infection is a major problem world-wide, especially in wound treatment where it can severely prolong the healing process. In this study, a double drug co-delivery elastic antibacterial nanocomposite was developed by combining ciprofloxacin (CPX) and polymyxin B sulfate-loaded halloysite clay nanotubes (HNTs-B) into a gelatin elastomer. CPX nanoparticles which act against both gram positive and gram-negative bacterium were dispersed directly in the matrix, and polymyxin B sulfate was loaded in HNTs and then distributed into the matrix. The effect of CPX and HNTs-B content on the physical properties, cytotoxicity, fibroblast adhesion and proliferation, in vitro drug release behavior and anti-bacterial properties were systematically investigated. The ciprofloxacin crystals and HNT-B were distributed in the matrix uniformly. The HNTs in the drug loading system not only enhanced the matrix' tensile strength but also slowed down the release rate of the high dissoluble polymyxin B sulfate. When the amount of HNT in the matrix increased, the thermal stability and tensile strength also increased but the polymyxin B sulfate release rate decreased because the HNTs prevented the drug release inside. All the nanocomposites exhibited antimicrobial activity against both gram-negative and gram-positive bacteria with the dual combination of drugs released from the nanocomposites. Furthermore, this kind of gelatin-based nanocomposites possesses higher water-absorbing quality, low cytotoxicity, adaptable biodegradability and good elasticity which can satisfy the requirements for an ideal biomaterial for use in wound healing applications.

Encoding materials for programming a temporal sequence of actions

Materials are usually synthesized to allow a function that is either independent of time or that can be triggered in a specific environment.

* Engineering Membranes for Bone Regeneration

This review is focused on the use of membranes for the specific application of bone regeneration. The first section focuses on the relevance of membranes in this context and what are the specifications that they should possess to improve the regeneration of bone. Afterward, several techniques to engineer bone membranes by using "bulk"-like methods are discussed, where different parameters to induce bone formation are disclosed in a way to have desirable structural and functional properties. Subsequently, the production of nanostructured membranes using a bottom-up approach is discussed by highlighting the main advances in the field of bone regeneration. Primordial importance is given to the promotion of osteoconductive and osteoinductive capability during the membrane design. Whenever possible, the films prepared using different techniques are compared in terms of handability, bone guiding ability, osteoinductivity, adequate mechanical properties, or biodegradability. A last chapter contemplates membranes only composed by cells, disclosing their potential to regenerate bone.

Polymerisation, antibacterial and bioactivity properties of experimental orthodontic adhesives containing triclosan-loaded halloysite nanotubes

OBJECTIVE

To evaluate the immediate enamel bond strength, in situ degree of conversion and the polymerisation rate of three experimental orthodontic adhesives containing triclosan-loaded halloysite nanotubes. The antibacterial and bioactivity properties of such experimental materials were also assessed.

MATERIALS AND METHODS

Three experimental orthodontic adhesives were formulated by incorporating triclosan-loaded halloysite nanotubes (TCN-HNT) at different concentrations (5wt%, 10wt% and 20wt%) into a resin blend (Control). The maximum polymerisation rate of the tested adhesives was evaluated trough FTIR, while Raman was used to analyse the in situ degree of conversion (DC) at the bracket/enamel interface. The shear bond strength (SBS) of the enamel-bonded specimens was assessed at 24h. The antibacterial properties of the experimental materials against S. Mutans were evaluate up to 72h, while, their bioactivity was evaluated after 14days of artificial saliva (AS) storage through SEM-EDS and Raman spectromicroscopy.

RESULTS

Incorporation of TCN-HNT increased the polymerisation properties without interfering with the immediate bonding properties of the experimental adhesives. All experimental adhesives containing TCN-HNT inhibited bacterial growth at 24h, and induced mineral deposition after 14days of AS storage. At 72h, only the experimental system containing 20% TCN-HNT maintained such a capability.

CONCLUSIONS

Adhesives doped with TCN-HNT present improved polymerisation properties and suitable bonding performance. However, only the adhesives containing TCN-HNT >10% might promote long-term antibacterial activity and reliable mineral deposition.

CLINICAL SIGNIFICANCE

The use of adhesives containing triclosan-loaded halloysite represents a promising "smart" approach to bond orthodontic brackets and bands; these might prevent enamel demineralisation and induce enamel remineralisation during the treatment.

Chitosan based nano composite adsorbent-Synthesis, characterization and application for adsorption of binary mixtures of Pb(II) and Cd(II) from water

Composite type adsorbent was prepared by integrating chitosan (Cs) with crosslinked polymethacrylic acid (PMA) and nano sized halloysite nanotube (HNT). The structure of the resulting Cs-PMA/HNT adsorbents was characterized by FTIR, NMR, XRD, TGA, SEM/EDX and rheological properties. These functional adsorbents were used for removal of Pb(II) and Cd(II) as single and binary competitive mixtures from water. There was a significant improvement in adsorption properties of crosslinked PMA in the presence of Cs and HNT. The effect of synthesis parameters such as wt.% of Cs and HNT on swelling and process parameters such as solution pH, adsorbent dosage, contact time and feed concentration on adsorption of metal ions from water were studied in batch experiments. For a feed concentration of 100mg/L of metal ion, an adsorbent dose of 0.25g/L and a solution pH of 6, the Cs-PMA/HNT composite adsorbent containing 4wt% Cs and 3wt% HNT showed an adsorption capacity (mg/g)/removal% of 357.4/89.4 and 341.6/85.4 for single Pb(II) and Cd(II), respectively which reduced to 313.7/78.4 and 303.6/77.3 for the same metal ions in their binary mixtures in water.

Alkali-Mediated Miscibility of Gelatin/Polycaprolactone for Electrospinning Homogeneous Composite Nanofibers for Tissue Scaffolding

Electrospun natural-synthetic composite nanofibers, which possess favorable biological and mechanical properties, have gained widespread attention in tissue engineering. However, the development of biomimetic nanofibers of hybrids remains a huge challenge due to phase separation of the polymer blends. Here, aqueous sodium hydroxide (NaOH) solution is proposed to modulate the miscibility of a representative natural-synthetic hybrid of gelatin (GT) and polycaprolactone (PCL) for electrospinning homogeneous composite nanofibers. Alkali-doped GT/PCL solutions and nanofibers examined at macroscopic, microscopic, and internal molecular levels demonstrate appropriate miscibility of GT and PCL after introducing the alkali dopant. Particularly, homogeneous GT/PCL nanofibers with smooth surface and uniform diameter are obtained when aqueous NaOH solution with a concentration of 10 m is used. The fibers become more hydrophilic and possess improved mechanical properties both in dry and wet conditions. Moreover, biocompatibility experiments show that stem cells adhere to and proliferate better on the alkali-modified nanofibers than the untreated one. This study provides a facile and effective approach to solve the phase separation issue of the synthetic-natural hybrid GT/PCL and establishes a correlation of compositionally and morphologically homogeneous composite nanofibers with respect to cell responses.

Multifunctional Nanotube-Mucoadhesive Poly(methyl vinyl ether-co-maleic acid)@Hydroxypropyl Methylcellulose Acetate Succinate Composite for Site-Specific Oral Drug Delivery

An advanced oral drug delivery system that can effectively deliver drugs with poor oral bioavailability is strongly desirable. Herein, a multifunctional nano-in-micro structured composite is developed by encapsulation of the mucoadhesive poly(methyl vinyl ether-co-maleic acid) modified halloysite nanotubes (HNTs) with the pH-responsive hydroxypropyl methylcellulose acetate succinate by the microfluidics to control the drug release, increase cell-particle interaction, and improve drug absorption. The microparticles show spherical shape, homogeneous particle size distribution (58 ± 1 µm), and pH-responsive dissolution behavior at pH > 6, and they prevent the premature release of curcumin in simulated pH conditions of the stomach and immediately release the curcumin in simulated pH conditions of the small intestine. The surface modification of HNT with mucoadhesive poly(methyl vinyl ether-co-maleic acid) significantly enhances its interactions with the intestinal Caco-2/HT29-MTX cells and the mouse small intestines, and increases the permeability of curcumin across the co-cultured Caco-2/HT29-MTX cell monolayers by about 13 times compared to the free curcumin. Therefore, the developed multifunctional nanotube-mucoadhesive poly(methyl vinyl ether-co-maleic acid)@hydroxypropyl methylcellulose acetate succinate composite is a promising oral drug delivery system for drugs with poor oral bioavailability.

Smart H2O2-Responsive Drug Delivery System Made by Halloysite Nanotubes and Carbohydrate Polymers

A novel chemical hydrogel was facilely achieved by coupling 1,4-phenylenebisdiboronic acid modified halloysite nanotubes (HNTs-BO) with compressible starch. The modified halloysite nanotubes (HNTs) and prepared hydrogel were characterized by solid-state nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The linkage of B-C in the hydrogel can be degraded into B-OH and C-OH units in the presence of H₂O₂ and result in the degradation of the chemical hydrogel. Pentoxifylline was loaded into the lumen of the HNTs-BO, and then gave the pentoxifylline-loaded hydrogel. The drug release profile shows that it was no more than 7% dissolved when using phosphate buffer solution (PBS) as the release medium. Notably, a complete release (near 90%) can be achieved with the addition of H₂O₂ ([H₂O₂] = 1 × 10^-4 M), suggesting a high H₂O₂ responsiveness of the as-formed hydrogel. The drug release results also show that the "initial burst release" can be effectively suppressed by loading pentoxifylline inside the lumen of the HNTs rather than embedding the drug in the hydrogel network. The drug-loaded hydrogel with H₂O₂-responsive release behavior may open up a broader application in the field of biomedicine.

Multifunctional halloysite nanotubes for targeted delivery and controlled release of doxorubicin in-vitro and in-vivo studies

The current state of cancer therapy encourages researchers to develop novel efficient nanocarriers. Halloysite nanotubes (HNTs) are good nanocarrier candidates due to their unique nanoscale (40-80 nm in diamter and 200-500 nm in length) and hollow lumen, as well as good biocompatibility and low cost. In our study, we prepared a type of folate-mediated targeting and redox-triggered anticancer drug delivery system, so that Doxorubicin (DOX) can be specifically transported to tumor sites due to the over-expressed folate-receptors on the surface of cancer cells. Furthermore, it can then be released by the reductive agent glutathione (GSH) in cancer cells where the content of GSH is nearly 10³-fold higher than in the extracellular matrix. A series of methods have demonstrated that per-thiol-β-cyclodextrin (β-CD-(SH)₇) was successfully combined with HNTs via a redox-responsive disulfide bond, and folic acid-polyethylene glycol-adamantane (FA-PEG-Ad) was immobilized on the HNTs through the strong complexation between β-CD/Ad. In vitro studies indicated that the release rate of DOX raised sharply in dithiothreitol (DTT) reducing environment and the amount of released DOX reached 70% in 10 mM DTT within the first 10 h, while only 40% of DOX was released in phosphate buffer solution (PBS) even after 79 h. Furthermore, the targeted HNTs could be specifically endocytosed by over-expressed folate-receptor cancer cells and significantly accelerate the apoptosis of cancer cells compared to non-targeted HNTs. In vivo studies further verified that the targeted HNTs had the best therapeutic efficacy and no obvious side effects for tumor-bearing nude mice, while free DOX showed damaging effects on normal tissues. In summary, this novel nanocarrier system shows excellent potential for targeted delivery and controlled release of anticancer drugs and provides a potential platform for tumor therapy.

Antifouling Thermoplastic Composites with Maleimide Encapsulated in Clay Nanotubes

An antifouling ethylene-vinyl acetate copolymer (EVA) coating with halloysite clay nanotubes loaded with maleimide (TCPM) is prepared. Such antifoulant encapsulation allowed for extended release of TCPM and a long-lasting, efficient protection of the coated surface against marine microorganisms proliferation. Halloysite also induces the composite's anisotropy due to parallel alignment of the nanotubes. The maleimide loaded halloysite incorporated into the polymer matrix allowed for 12-month release of the bacterial inhibitor preventing fouling; it is much longer than the 2-3 month protection when TCPM is directly admixed into EVA. The antifouling properties of the EVA-halloysite nanocomposites were tested by monitoring surface adhesion and proliferation of marine V. natriegens bacteria with SEM. As compared to the composite directly doped with TCPM-antifoulant, there were much less bacteria accumulated on the EVA-halloysite-TCPM coating after a 2-month exposure to seawater. Field tests at South China Sea marine station further confirmed the formulation efficiency. The doping of 28 wt % TCPM loaded halloysite drastically enhanced material antifouling property, which promises wide applications for protective marine coating.

Long-acting and broad-spectrum antimicrobial electrospun poly (ε-caprolactone)/gelatin micro/nanofibers for wound dressing

Trimethoxysilylpropyl octadecyldimethyl ammonium chloride (QAS), which forms facile bonds with hydroxyl groups, acts asa cationic antibacterial agent. In this work, QAS was introduced into a polycaprolactone (PCL)/gelatin hybrid in increasing concentrations to fabricate a long-acting and broad-spectrum antimicrobial micro/nanofiber membrane as a novel wound dressing. The physical interactions and chemical bonding between QAS/PCL and QAS/gelatin were demonstrated by infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS. Measured water contact angle between the PCL-gelatin/QAS (PG-Q) nanofiber membranes suggested a hydrophobic surface, which has been shown to aid in removal of wound dressings. The mechanical strength of the membranes was sufficient to meet the clinical requirements. Furthermore, the 15% QAS (PG-Q15) and 20% QAS (PG-Q20) formulated nanofiber membranes showed a considerable increase in their bacteriostatic activity towards Staphylococcus aureus (gram-positive) and Pseudomonas aeruginosa (gram-negative) bacteria, suggesting a broad-spectrum bactericidal effect by the PG-Q membranes. The PG-Q membranes with various QAS formulations demonstrated little cytotoxicity. Therefore, the long-acting and broad-spectrum antimicrobial electrospun PG-Q micro/nanofibers membrane demonstrate potential efficacy asan antibacterial wound dressing.

Halloysite nanotubes as carriers of vancomycin in alginate-based wound dressing

The influence of an inorganic support - halloysite nanotubes - on the release rate and biological activity of the antibiotic encapsulated in alginate-based dressings was studied. The halloysite samples were loaded with approx. 10 wt.% of the antibiotic and then encapsulated in Alginate and Gelatin/Alginate gels. The material functionalized with aliphatic amine significantly extended the release of vancomycin from alginate-based gels as compared to that achieved when silica was used. After 24 h, the released amounts of the antibiotic immobilized at silica reached 70%, while for the drug immobilized at halloysite the released amount of vancomycin reached 44% for Alginate discs. The addition of gelatin resulted in even more prolonged sustained release of the drug. The antibiotic was released from the system with a double barrier with Higuchi kinetic model and Fickian diffusion mechanism. Only the immobilized drug encapsulated in Alginate gel demonstrated very good antimicrobial activity against various bacteria. The inhibition zones were greater than those of the standard discs for the staphylococci and enterococci bacteria tested. The addition of gelatin adversely affected the biological activity of the system. The inhibition zones were smaller than those of the reference samples. A reduction in the drug dose by half had no significant effect on changing the release rate and microbiological activity. The in vivo toxicity studies of the material with immobilized drug were carried out with Acutodesmus acuminatus and Daphnia magna. The material studied had no effect on the living organisms used in the bioassays. The proposed system with a double barrier demonstrated high storage stability.

Antibacterial zinc oxide hybrid with gelatin coating

ZnO has been widely investigated as important biomaterials and antibacterial materials. However, the aggregation of nanoparticles and its potential toxicity may hinder its final application. Herein, biocompatible gelatin chains were grafted on the surface of ZnO via mussel inspired method to prevent the aggregation of the ZnO nanoparticles. The in vitro test showed that the gelatin can greatly improve the biocompatibility of ZnO, while the antibacterial properties of ZnO against both E. coli and S. aureus were maintained.

Electrically-responsive core-shell hybrid microfibers for controlled drug release and cell culture

It is an active research field to develop fiber-shaped smart materials for biomedical applications. Here we report the development of the multifunctional core-shell hybrid microfibers with excellent mechanical and electrical performance as a new smart biomaterial. The microfibers were synthesized using a combination of co-axial spinning with a microfluidic device and subsequent dip-coating, containing a hydrogel core of bacterial cellulose (BC) and a conductive polymer shell layer of poly(3,4-ethylenedioxythiophene) (PEDOT). The hybrid microfibers were featured with a well-controlled microscopic morphology, exhibiting enhanced mechanic properties. A model drug, diclofenac sodium, can be loaded in the core layer of the microfibers in situ during the process of synthesis. Our experiments suggested that the releasing behaviors of the drug molecules from the microfibers were enhanced by external electrical stimulation. Interestingly, we demonstrated an excellent biocompatibility and electroactivity of the hybrid microfibers for PC12 cell culture, thus promising a flexible template for the reconstruction of electrically-responsive tissues mimicking muscle fibers or nerve networks.

STATEMENT OF SIGNIFICANCE

Fiber-shaped biomaterials are useful in creating various functional objects from one dimensional to three-dimensional. The fabrication of microfibers with integrated physicochemical properties and bio-performance has drawn an increasing attention on researchers from chemical to biomedical. This study combined biocompatible bacterial cellulose with electroconductive poly(3,4-ethylenedioxythiophene) and further reduced them to a highly electroactive BC/PEDOT core-shell microfiber electrode for electrochemical actuator design. The result showed that the microfibers were well fabricated and the release of drugs from the microfibers was enhanced and could be controlled under electrical stimulation externally. Considering the excellent biocompatibility and electroactive toward PC12 cells, these microfibers may find use as templates for the reconstruction of fiber-shaped functional tissues that mimic muscle fibers, blood vessels or nerve networks in vivo.

Insight into the precursor nanofibers on the flexibility of La2O3-ZrO2 nanofibrous membranes

Poly(vinyl pyrrolidone) (PVP)/La3+/Zr4+ precursor nanofibrous membranes (LZPNM) with various Zr contents were synthesized via a simple electrospinning method. By controlling the Zr incorporation, the tensile properties of precursor membranes dramatically change from 0.77 to 1.73 MPa. Meanwhile, the average diameters of precursor nanofibers increase with the increase of Zr contents (from 283 to 535 nm). In addition, flexible La2O3-ZrO2 nanofibrous membranes (LZNM) were obtained by calcination of corresponding precursor membranes. Furthermore, the structures and morphologies of the precursor membranes were investigated using X-ray powder diffraction analysis (XRD) and field-emission scanning electron microscopy (FE-SEM). The surface functional groups and thermal properties of the precursor membranes were measured via Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA).

A gelatin composite scaffold strengthened by drug-loaded halloysite nanotubes

Mechanical properties and anti-infection are two of the most concerned issues for artificial bone grafting materials. Bone regeneration porous scaffolds with sustained drug release were developed by freeze-drying the mixture of nanosized drug-loaded halloysite nanotubes (HNTs) and gelatin. The scaffolds showed porous structure and excellent biocompatibility. The mechanical properties of the obtained composite scaffolds were enhanced significantly by HNTs to >300%, comparing to those of gelatin scaffold, and match to those of natural cancellous bones. The ibuprofen-loaded HNTs incorporated in the scaffolds allowed extended drug release over 100h, comparing to 8h when directly mixed the drug into the gelatin scaffold. The biological properties of the composite scaffolds were investigated by culturing MG63 cells on them. The HNTs/gelatin scaffolds with excellent mechanical properties and sustained drug release could be a promising artificial bone grating material.

Sequence-Controlled Delivery of Peptides from Hierarchically Structured Nanomaterials

Peptide drugs delivered orally need to be protected from degradation for achieving their functions. To fulfill the complicated task of oral drug delivery, we present a hierarchically structured drug-delivery system that can undertake structural changes, so multiple functions can be triggered by a sequence of stimuli. Such hierarchical system is achieved in a nanoparticle-in-nanofiber configuration, in which both the nanofibers and the nanoparticles are pH-responsive and biocompatible. A model peptide is efficiently encapsulated under mild condition, and the nanocarriers are further electrospun with a pH-responsive mucoadhesive polymer. The nanoparticles are released from the nanofibers, and thereafter the peptides are released from the nanoparticles in a pH-responsive manner. The nanoparticles are compatible with caco-2 cells, and the endocytosis of the nanoparticles is described in detail.

Microfluidic assembly of a nano-in-micro dual drug delivery platform composed of halloysite nanotubes and a pH-responsive polymer for colon cancer therapy

Harsh conditions of the gastrointestinal tract hinder the oral delivery of many drugs. Developing oral drug delivery systems based on commercially available materials is becoming more challenging due to the demand for simultaneously delivering physicochemically different drugs for treating complex diseases. A novel architecture, namely nanotube-in-microsphere, was developed as a drug delivery platform by encapsulating halloysite nanotubes (HNTs) in a pH-responsive hydroxypropyl methylcellulose acetate succinate polymer using microfluidics. HNTs were selected as orally acceptable clay mineral and their lumen was enlarged by selective acid etching. Model drugs (atorvastatin and celecoxib) with different physicochemical properties and synergistic effect on colon cancer prevention and inhibition were simultaneously incorporated into the microspheres at a precise ratio, with atorvastatin and celecoxib being loaded in the HNTs and polymer matrix, respectively. The microspheres showed spherical shape, narrow particle size distribution and pH-responsive dissolution behavior. This nanotube/pH-responsive polymer composite protected the loaded drugs from premature release at pH⩽6.5, but allowed their fast release and enhanced the drug permeability, and the inhibition of colon cancer cell proliferation at pH 7.4. Overall, the nano-in-micro drug delivery composite fabricated by microfluidics is a promising and flexible platform for the delivery of multiple drugs for combination therapy.

STATEMENT OF SIGNIFICANCE

Halloysite nanotubes (HNTs) are attracting increasing attention for drug delivery applications. However, conventional HNTs-based oral drug delivery systems are lack of the capability to precisely control the drug release at a desired site in the gastrointestinal tract. In this study, a nanotube-in-microsphere drug delivery platform is developed by encapsulating HNTs in a pH-responsive polymer using microfluidics. Drugs with different physicochemical properties and synergistic effect on colon cancer therapy were simultaneously incorporated in the microspheres. The prepared microspheres prevented the premature release of the loaded drugs after exposure to the harsh conditions of the gastrointestinal tract, but allowed their simultaneously fast release, and enhanced the drug permeability and the inhibition of colon cancer cell proliferation in response to the colon pH.

Enzyme-immobilized clay nanotube–chitosan membranes with sustainable biocatalytic activities

We have developed a simple and effective strategy to prepare an enzymatic membrane by the admixing of a halloysite clay nanotube–lipase complex and a chitosan solution.

Long-term antibacterial protected cotton fabric coating by controlled release of chlorhexidine gluconate from halloysite nanotubes

An antibacterial HNTs/CG composite with controlled release was prepared, and used to coat cotton to obtain an antibacterial and biocompatible cotton fabric.