Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)

High-performance flexible thermoelectric modules based on high crystal quality printed TiS2/hexylamine

Printed electronics implies the use of low-cost, scalable, printing technologies to fabricate electronic devices and circuits on flexible substrates, such as paper or plastics. The development of this new electronic is currently expanding because of the emergence of the internet-of-everything. Although lot of attention has been paid to functional inks based on organic semiconductors, another class of inks is based on nanoparticles obtained from exfoliated 2D materials, such as graphene and metal sulfides. The ultimate scientific and technological challenge is to find a strategy where the exfoliated nanoparticle flakes in the inks can, after solvent evaporation, form a solid which displays performances equal to the single crystal of the 2D material. In this context, a printed layer, formed from an ink composed of nano-flakes of TiS₂ intercalated with hexylamine, which displays thermoelectric properties superior to organic intercalated TiS₂ single crystals, is demonstrated for the first time. The choice of the fraction of exfoliated nano-flakes appears to be a key to the forming of a new self-organized layered material by solvent evaporation. The printed layer is an efficient n-type thermoelectric material which complements the p-type printable organic semiconductors The thermoelectric power factor of the printed TiS₂/hexylamine thin films reach record values of 1460 µW m^-1 K^-2 at 430 K, this is considerably higher than the high value of 900 µW m^-1 K^-2 at 300 K reported for a single crystal. A printed thermoelectric generator based on eight legs of TiS₂ confirms the high-power factor values by generating a power density of 16.0 W m^-2 at ΔT = 40 K.

Lactone Backbone Density in Rigid Electron-Deficient Semiconducting Polymers Enabling High n-type Organic Thermoelectric Performance

Three lactone-based rigid semiconducting polymers were designed to overcome major limitations in the development of n-type organic thermoelectrics, namely electrical conductivity and air stability. Experimental and theoretical investigations demonstrated that increasing the lactone group density by increasing the benzene content from 0 % benzene (P-0), to 50 % (P-50), and 75 % (P-75) resulted in progressively larger electron affinities (up to 4.37 eV), suggesting a more favorable doping process, when employing (N-DMBI) as the dopant. Larger polaron delocalization was also evident, due to the more planarized conformation, which is proposed to lead to a lower hopping energy barrier. As a consequence, the electrical conductivity increased by three orders of magnitude, to achieve values of up to 12 S cm and Power factors of 13.2 μWm^-1  K^-2 were thereby enabled. These findings present new insights into material design guidelines for the future development of air stable n-type organic thermoelectrics.

Doping Approaches for Organic Semiconductors

Electronic doping in organic materials has remained an elusive concept for several decades. It drew considerable attention in the early days in the quest for organic materials with high electrical conductivity, paving the way for the pioneering work on pristine organic semiconductors (OSCs) and their eventual use in a plethora of applications. Despite this early trend, however, recent strides in the field of organic electronics have been made hand in hand with the development and use of dopants to the point that are now ubiquitous. Here, we give an overview of all important advances in the area of doping of organic semiconductors and their applications. We first review the relevant literature with particular focus on the physical processes involved, discussing established mechanisms but also newly proposed theories. We then continue with a comprehensive summary of the most widely studied dopants to date, placing particular emphasis on the chemical strategies toward the synthesis of molecules with improved functionality. The processing routes toward doped organic films and the important doping-processing-nanostructure relationships, are also discussed. We conclude the review by highlighting how doping can enhance the operating characteristics of various organic devices.

Printing thermoelectric inks toward next-generation energy and thermal devices

The ability of thermoelectric (TE) materials to convert thermal energy to electricity and vice versa highlights them as a promising candidate for sustainable energy applications. Despite considerable increases in the figure of merit zT of thermoelectric materials in the past two decades, there is still a prominent need to develop scalable synthesis and flexible manufacturing processes to convert high-efficiency materials into high-performance devices. Scalable printing techniques provide a versatile solution to not only fabricate both inorganic and organic TE materials with fine control over the compositions and microstructures, but also manufacture thermoelectric devices with optimized geometric and structural designs that lead to improved efficiency and system-level performances. In this review, we aim to provide a comprehensive framework of printing thermoelectric materials and devices by including recent breakthroughs and relevant discussions on TE materials chemistry, ink formulation, flexible or conformable device design, and processing strategies, with an emphasis on additive manufacturing techniques. In addition, we review recent innovations in the flexible, conformal, and stretchable device architectures and highlight state-of-the-art applications of these TE devices in energy harvesting and thermal management. Perspectives of emerging research opportunities and future directions are also discussed. While this review centers on thermoelectrics, the fundamental ink chemistry and printing processes possess the potential for applications to a broad range of energy, thermal and electronic devices.

Rapid prototyping of heterostructured organic microelectronics using wax printing, filtration, and transfer

Conducting polymers are the natural choice for soft electronics. However, the main challenge is to pattern conducting polymers using a simple and rapid method to manufacture advanced devices. Filtration of conducting particle dispersions using a patterned membrane is a promising method. Here, we show the rapid prototyping of various micropatterned organic electronic heterostructures of PEDOT:PSS by inducing the formation of microscopic hydrogels, which are then filtered through membranes containing printed hydrophobic wax micropatterns. The hydrogels are retained on the un-patterned, hydrophilic regions, forming micropatterns, achieving a resolution reaching 100 μm. We further solve the problem of forming stacked devices by transferring the acidified PEDOT:PSS micropattern using the adhesive tape transfer method to form vertical heterostructures with other micropatterned electronic colloids such as CNTs, which are patterned using a similar technique. We demonstrate a number of different heterostructure devices including micro supercapacitors and organic electrochemical transistors and also demonstrate the use of acidified PEDOT:PSS microstructures in cell cultures to enable bioelectronics.

Unconventional Thermoelectric Materials for Energy Harvesting and Sensing Applications

Heat is an abundant but often wasted source of energy. Thus, harvesting just a portion of this tremendous amount of energy holds significant promise for a more sustainable society. While traditional solid-state inorganic semiconductors have dominated the research stage on thermal-to-electrical energy conversion, carbon-based semiconductors have recently attracted a great deal of attention as potential thermoelectric materials for low-temperature energy harvesting, primarily driven by the high abundance of their atomic elements, ease of processing/manufacturing, and intrinsically low thermal conductivity. This quest for new materials has resulted in the discovery of several new kinds of thermoelectric materials and concepts capable of converting a heat flux into an electrical current by means of various types of particles transporting the electric charge: (i) electrons, (ii) ions, and (iii) redox molecules. This has contributed to expanding the applications envisaged for thermoelectric materials far beyond simple conversion of heat into electricity. This is the motivation behind this review. This work is divided in three sections. In the first section, we present the basic principle of the thermoelectric effects when the particles transporting the electric charge are electrons, ions, and redox molecules and describe the conceptual differences between the three thermodiffusion phenomena. In the second section, we review the efforts made on developing devices exploiting these three effects and give a thorough understanding of what limits their performance. In the third section, we review the state-of-the-art thermoelectric materials investigated so far and provide a comprehensive understanding of what limits charge and energy transport in each of these classes of materials.

Crystalline Domain Formation to Enable High-Performance Polymer Thermoelectrics Inspired by Thermocleavable Materials

Improving the electrical conductivity is an important role in realizing high thermoelectric performance of solution-processable polymers. Herein, a simple and robust approach to boost the mobility and doping efficiency of a diketopyrrolopyrrole-based copolymer with the introduction of thermocleavable side chains (PDPPS-X, where X is the molar ratio of the thermocleavable side chains and alkyl chains) is first provided. Notably, the incorporated thermocleavable groups can be effectively removed after thermal treatment and therefore contribute to the crystalline domain formation via hydrogen-bonded networks, which is critical for conductivity enhancements. Grazing incidence wide-angle X-ray scattering (GIWAXS) patterns give a clear indication that the thermal treatment of PDPPS-5 can greatly improve the structural arrangement, resulting in a significantly enhanced hole mobility (5.4 times that of PDPPS-0 without thermocleavable chains). Compared to PDPPS-0, a larger Fermi level shift is observed after doping PDPPS-5 with FeCl₃, reflecting a better doping efficiency. Consequently, remarkably improved conductivity and power factor are achieved by PDPPS-5 after doping with 0.03 M FeCl₃ at room temperature, which are about 2.2 and 3.5 times higher than that of PDPPS-0 at the same testing condition, respectively. Moreover, PDPPS-5 achieved a maximum power factor of 57.5 μW m^-1 K^-2 at 404 K.

First-Principle Study on p-n Control of PEDOT-Based Thermoelectric Materials by PTSA Doping

PEDOT

Tos, a PSS-free PEDOT-based material, is a promising possible organic thermoelectric material for a practical conversion module because the material reportedly has a large power factor. However, since PEDOT:Tos is mainly reported to be a p-type thermoelectric material, the development of PSS-free PEDOT with n-type thermoelectric properties is desirable. Thus, in order to search for PSS-free PEDOT with n-type thermoelectric properties, we investigated the doping concentration of PTSA dependence of the thermoelectric property using the first-principle calculation. The band structure and the density of state indicated that the n-type thermal electromotive force was attributed to the electrons' large effective mass. Such electrons were produced thanks to the binding of the dopant PTSA to the benzene ring. The contribution of the electron to the Seebeck coefficient increased with increasing PTSA doping concentrations.

Wearable Thermoelectric Devices Based on Three-Dimensional PEDOT:Tosylate/CuI Paper Composites

Thermoelectric composites of organic and inorganic materials exhibit significantly enhanced thermoelectric properties compared with pristine organic thermoelectrics so they might be better suited as core materials of wearable thermoelectric devices. This study describes the development of three-dimensional (3D) paper PEDOT:tosylate/CuI composites that could be shaped as 3 mm thick blocks to convert a temperature difference between their bottom and top sides into power; the majority of organic thermoelectric materials are shaped as thin strips usually on a planar substrate and convert a temperature difference between the opposite edges of the strips into power. The 3D paper PEDOT:tosylate/CuI composites can produce a power density equal to 4.8 nW/cm² (ΔΤ = 6 Κ) that is 10 times higher than that of the pristine paper PEDOT:Tos composites. The enhanced thermoelectric properties of the paper PEDOT:tosylate/CuI composites are attributed to the CuI nanocrystals entrapped inside the composite that increases the Seebeck coefficient of the composite to 225 μV K^-1; the Seebeck coefficient of paper PEDOT:Tos is 65 μV K^-1. A proof-of-concept wearable thermoelectric device that uses 36 blocks of the paper PEDOT:tosylate/CuI composites (as p-type elements) and 36 wires of monel (as n-type elements) can produce up to 4.7 μW of power at ΔΤ = 20 K. The device has a footprint of 64 cm² and can be placed directly over the skin or can be embedded into clothing.

Quantifying charge carrier localization in chemically doped semiconducting polymers

Charge transport in semiconducting polymers ranges from localized (hopping-like) to delocalized (metal-like), yet no quantitative model exists to fully capture this transport spectrum and its dependency on charge carrier density. In this study, using an archetypal polymer-dopant system, we measure the temperature-dependent electrical conductivity, Seebeck coefficient and extent of oxidation. We then use these measurements to develop a semi-localized transport (SLoT) model, which captures both localized and delocalized transport contributions. By applying the SLoT model to published data, we demonstrate its broad utility. We are able to determine system-dependent parameters such as the maximum localization energy of the system, how this localization energy changes with doping, the amount of dopant required to achieve metal-like conductivity and the conductivity a system could have in the absence of localization effects. This proposed SLoT model improves our ability to predict and tailor electronic properties of doped semiconducting polymers.

Raising Dielectric Permittivity Mitigates Dopant-Induced Disorder in Conjugated Polymers

Conjugated polymers need to be doped to increase charge carrier density and reach the electrical conductivity necessary for electronic and energy applications. While doping increases carrier density, Coulomb interactions between the dopant molecules and the localized carriers are poorly screened, causing broadening and a heavy tail in the electronic density-of-states (DOS). The authors examine the effects of dopant-induced disorder on two complimentary charge transport properties of semiconducting polymers, the Seebeck coefficient and electrical conductivity, and demonstrate a way to mitigate them. Their simulations, based on a modified Gaussian disorder model with Miller-Abrahams hopping rates, show that dopant-induced broadening of the DOS negatively impacts the Seebeck coefficient versus electrical conductivity trade-off curve. Increasing the dielectric permittivity of the polymer mitigates dopant-carrier Coulomb interactions and improves charge transport, evidenced by simultaneous increases in conductivity and the Seebeck coefficient. They verified this increase experimentally in iodine-doped P3HT and P3HT blended with barium titanate (BaTiO3 ) nanoparticles. The addition of 2% w/w BaTiO3 nanoparticles increased conductivity and Seebeck across a broad range of doping, resulting in a fourfold increase in power factor. Thus, these results show a promising path forward to reduce the dopant-charge carrier Coulomb interactions and mitigate their adverse impact on charge transport.

Wearable Thermoelectric Materials and Devices for Self-Powered Electronic Systems

The emergence of artificial intelligence and the Internet of Things has led to a growing demand for wearable and maintenance-free power sources. The continual push toward lower operating voltages and power consumption in modern integrated circuits has made the development of devices powered by body heat finally feasible. In this context, thermoelectric (TE) materials have emerged as promising candidates for the effective conversion of body heat into electricity to power wearable devices without being limited by environmental conditions. Driven by rapid advances in processing technology and the performance of TE materials over the past two decades, wearable thermoelectric generators (WTEGs) have gradually become more flexible and stretchable so that they can be used on complex and dynamic surfaces. In this review, the functional materials, processing techniques, and strategies for the device design of different types of WTEGs are comprehensively covered. Wearable self-powered systems based on WTEGs are summarized, including multi-function TE modules, hybrid energy harvesting, and all-in-one energy devices. Challenges in organic TE materials, interfacial engineering, and assessments of device performance are discussed, and suggestions for future developments in the area are provided. This review will promote the rapid implementation of wearable TE materials and devices in self-powered electronic systems.

High Performance of Post-Treated PEDOT:PSS Thin Films for Thermoelectric Power Generation Applications

Thermoelectric materials capable of converting waste heat energy into electrical energy are enchanting for applications in wearable electronics and sensors by harvesting heat energy of the human body. Organic conducting polymers offer promise of thermoelectric materials for next-generation power sources of wearable devices due to their low cost in preparation, easy processing, low toxicity, low thermal conductivity, mechanical flexibility, light weight, and large area application. Generally, the pristine PEDOT:PSS film has low electrical conductivity, small Seebeck coefficient, and low thermal conductivity. The thermoelectric power factors of conducting polymers of p-type PEDOT:PSS films are considerably improved via synergistic effect by using ethylene glycol and reductants of EG/NaBH₄ or EG/NaHCO₃. As such, the charge carrier concentration of PEDOT:PSS films is tuned. The synergistic effect might lead to enhanced variation of density of states at the Fermi level and hence enhanced Seebeck coefficient. The resulting PEDOT:PSS films were characterized by atomic force microscopy (AFM), Raman spectroscopy, and XPS spectroscopy. The electrical conductivity and Seebeck coefficient were measured between 325 and 450 K. The carrier concentration and mobility were obtained by Hall measurements. The pristine thin film treated with 0.05 M EG/NaHCO₃ solution exhibits the highest power factor of 183 μW m^-1 K^-2 at 450 K among these two series of films due to its significant enhanced Seebeck coefficient of 48 μV/K. The maximum output power of 121.08 nW is attained at the output voltage of 6.98 mV and the output current of 17.45 μA. The corresponding maximum power density is 98 μW/cm² for a power generation device made of four pairs of p-leg (EG/NaHCO₃ post-treated PEDOT:PSS) and n-leg (Cu_0.6Ni_0.4) on the polyamide substrate with the size of 4 mm × 20 mm for each leg.

A negative piezo-conductive effect from doped semiconducting polymer thin films

In the past years, piezo-conductive sensors have drawn great attention in both academic and industrial sectors. The piezo-conductive sensors made by inorganic semiconductors exhibited poor mechanical flexibility, restricting their further practical applications. In this study, we report the piezo-conductive sensors by a semiconducting polymer, poly(3,4-ethylenedioxythiophene) doped with tosylate ions (PEDOT:Tos) thin films. Systemically studies indicate that the piezo-conductive response of the PEDOT:Tos thin films is originated from the deformation of the PEDOT crystal cells and the stretched π-π distances induced by Tos. Moreover, the negative piezo-conductive effect, for the first time, is observed from PEDOT:Tos thin film under the pressure. A working mechanism is further proposed to interpret the transient from a positive to a negative piezo-conductive response within the PEDOT:Tos thin films. Our studies offer a facile route to approach effective piezo-conductive sensors based on conjugated polymers.

Significant Enhancement of Thermoelectric Properties of PTB7 Conducting Polymer by Mixed-Solvent Approach

The thermoelectric properties of poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}), commonly known as PTB7 conducting polymer, were investigated for the first time by Rastegaralam et al. in 2017 [ Crystals 2017, 7, 292]. PTB7 showed higher electrical conductivity or Seebeck coefficient (or even both) and, hence, a higher thermoelectric power factor than a variety of organic semiconductors. Therefore, it is worth working more on this semiconductor to improve its thermoelectric figure of merit. In this work, for the first time the effect of cosolvents on the thermoelectric properties of PTB7 is investigated. PTB7 conducting polymer dissolved in chlorobenzene was treated with different solvents: N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N-methyl-2-pyrrolidone (NMP), acetonitrile (AC), and 1,2-dichloroethane (DCE). Upon addition of DMF, DMSO, and NMP, a significant enhancement in the electrical conductivity of the samples accompanied by a reduction in the Seebeck coefficient occurred as a result of doping, while the use of AC and DCE led to simultaneous enhancement in the electrical conductivity and the Seebeck coefficient by increasing the mobility. The dopants used in this work are inexpensive, are easily available, and do not need to perform any synthesis process. The highest estimated figure of merit value obtained in this work without optimization is 0.1, which is of the highest values for organic thermoelectric materials.

Multidimensional Nano-Imaging of Structure, Coupling, and Disorder in Molecular Materials

A hierarchy of intramolecular and intermolecular interactions controls the properties of biomedical, photophysical, and novel energy materials. However, multiscale heterogeneities often obfuscate the relationship between microscopic structure and emergent function, and they are generally difficult to access with conventional optical and electron microscopy techniques. Here, we combine vibrational exciton nanoimaging in variable-temperature near-field optical microscopy (IR s-SNOM) with four-dimensional scanning transmission electron microscopy (4D-STEM), and vibrational exciton modeling based on density functional theory (DFT), to link local microscopic molecular interactions to macroscopic three-dimensional order. In the application to poly(tetrafluoroethylene) (PTFE), large spatio-spectral heterogeneities with C-F vibrational energy shifts ranging from sub-cm^-1 to ≳25 cm^-1 serve as a molecular ruler of the degree of local crystallinity and disorder. Spatio-spectral-structural correlations reveal a previously invisible degree of highly variable local disorder in molecular coupling as the possible missing link between nanoscale morphology and associated electronic, photonic, and other functional properties of molecular materials.

B←N-Incorporated Dibenzo-azaacenes as n-Type Thermoelectric Materials

Organic thermoelectric materials play a vital role in flexible power generating applications, such as wearable electronics and sensor networks. While there is a wealth of research on p-type organic thermoelectric materials, developments on n-type counterparts as complementary are comparatively limited. Herein, we report a new kind of n-type small-molecule thermoelectric materials based on B←N-incorporated dibenzo-azaacenes 1,2-DBNA-2 and 1,2-DBNA-5. Because of the low-lying lowest unoccupied molecular orbital (LUMO) energy levels, 1,2-DBNA-2 and 1,2-DBNA-5 could be efficiently n-doped, and the rigid and almost planar skeleton could ensure good carrier transfer. When doped with a typical n-dopant (4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl)dimethylamine (N-DMBI), 1,2-DBNA-5 exhibits a moderate conductivity of 0.01 S cm^-1 and a power factor of 0.06 μW m^-1 K^-2 with a Seebeck coefficient of -244.4 μV K^-1 in thermoelectric devices. These results not only demonstrate that B←N-incorporated dibenzo-azaacenes are a novel class of n-type thermoelectric materials but also highlight a new strategy to develop n-type organic thermoelectric materials.

Manipulating Carrier Concentration by Self-Assembled Monolayers in Thermoelectric Polymer Thin Films

Conjugated polymers have attracted considerable attention for thermoelectric applications in recent years due to their plentiful resources, diverse structures, mechanical flexibility, and low thermal conductivity. Herein, we demonstrate a new strategy of modulating charge carrier concentration of chemical-doped polymer films by modifying the substrate with self-assembled monolayers (SAMs). The SAM with a trifluoromethyl terminal group is found to accumulate holes in the polymer thin films, while the SAM with an amino terminal group tends to donate electrons to the polymer films. Thermoelectric thin films of conjugated donor-acceptor copolymer exhibit high power factors of 55.6-61.0 μW m^-1 K^-2 on SAMs with polar terminal groups. These power factors are 49% higher than that on the SAM with the nonpolar terminal group and 3 times higher than that on pristine substrate. The high power factor is ascribed to the modulated charge carrier concentration and improved charge carrier mobility as induced by SAMs.

Inversely polarized thermo-electrochemical power generation via the reaction of an organic redox couple on a TiO2/Ti mesh electrode

We demonstrate thermo-electrochemical (TEC) conversion using a biocompatible redox couple of lactic acid and pyruvic acid on earth-abundant TiO₂. The TEC cell exhibited a positive Seebeck coefficient of 1.40 mV K^-1. DFT calculations figured out that the adsorption of intermediate species and protons on TiO₂ controls both the redox reaction and current polarity.

Stoichiometric Doping of Highly Coupled Cu2-xS Nanocrystal Assemblies

The hole density of individual copper sulfide nanocrystals (Cu_2-xS NCs) is determined from the stoichiometric mismatch (x) between copper and sulfide atoms. Consequently, the electronic properties of the material vary over a range of x. To exploit Cu_2-xS NCs in devices, assemblies of NCs are typically required. Herein, we investigate the influence of x, referred to as the stoichiometric doping effect, on the structural, optical, electrical, and thermoelectric properties of electronically coupled Cu_2-xS NC assemblies. The doping process is done by immersing the solid NC assemblies into a solution containing a Cu(I) complex for different durations (0-10 min). As Cu⁺ gradually occupied the copper-deficient sites of Cu_2-xS NCs, x could be controlled from 0.9 to less than 0.1. Consequently, the near-infrared (NIR) absorbance of Cu_2-xS NC assemblies changes systematically with x. With increasing x, electrical conductivity increased and the Seebeck coefficient decreased systematically, leading to the maximal thermoelectric power factor from a film of Cu_2-xS NCs at an optimal doping condition yielding x = 0.1. The physical characteristics of the Cu_2-xS NC assemblies investigated herein will provide guidelines for exploiting this emerging class of nanocrystal system based on doping.

Oxygen-Rich Polymer Polyethylene Glycol-Functionalized Single-Walled Carbon Nanotubes Toward Air-Stable n-Type Thermoelectric Materials

It is crucial for thermoelectric (TE) devices to obtain both p-type and n-type materials and control charge carrier density. However, n-type thermoelectric materials are quite deficient and have lower thermoelectric properties. We report one oxygen-rich polymer named polyethylene glycol (PEG) for converting p-type single-walled carbon nanotubes (SWCNTs) to air-stable n-type thermoelectric materials. When pristine SWCNTs were doped with 2 mg·mL^-1 PEG in an ethanol solution, the optimal Seebeck coefficient of PEG/SWCNT composites reached -50.8 μV·K^-1. The result of ultraviolet photoelectron spectroscopy demonstrated that the lone pair of oxygen atoms in the PEG chain has electron transferability to SWCNTs. According to the hard and soft acid and base theory, sodium hydroxide (NaOH) was further introduced to improve air stability and thermoelectric performance of doped SWCNTs. As a result, PEG/NaOH/SWCNT composites achieved the highest power factor of 173.8 μW·m^-1·K^-2 at 300 K. Meanwhile, their final changes in electrical conductivity and the Seebeck coefficient are less than 8% in the investigation of air stability over two months. Inspired by this finding, we fabricated the TE generator composed of the pristine p-type SWCNTs and n-type PEG/NaOH/SWCNT composites. The maximum output power of this robust TE device reached 5.3 μW at a temperature gradient of 76 K, which is superior to many reported TE devices. Moreover, the experimental procedure is attractive as a sustainable process for materials preparation. Our study has indicated that the oxygen-rich polymer-functionalized SWCNTs have huge potential for developing air-stable n-type carbon-based thermoelectric materials.

Thermoelectric Materials for Textile Applications

Since prehistoric times, textiles have served an important role-providing necessary protection and comfort. Recently, the rise of electronic textiles (e-textiles) as part of the larger efforts to develop smart textiles, has paved the way for enhancing textile functionalities including sensing, energy harvesting, and active heating and cooling. Recent attention has focused on the integration of thermoelectric (TE) functionalities into textiles-making fabrics capable of either converting body heating into electricity (Seebeck effect) or conversely using electricity to provide next-to-skin heating/cooling (Peltier effect). Various TE materials have been explored, classified broadly into (i) inorganic, (ii) organic, and (iii) hybrid organic-inorganic. TE figure-of-merit (ZT) is commonly used to correlate Seebeck coefficient, electrical and thermal conductivity. For textiles, it is important to think of appropriate materials not just in terms of ZT, but also whether they are flexible, conformable, and easily processable. Commercial TEs usually compromise rigid, sometimes toxic, inorganic materials such as bismuth and lead. For textiles, organic and hybrid TE materials are more appropriate. Carbon-based TE materials have been especially attractive since graphene and carbon nanotubes have excellent transport properties with easy modifications to create TE materials with high ZT and textile compatibility. This review focuses on flexible TE materials and their integration into textiles.

High performance polypyrrole/SWCNTs composite film as a promising organic thermoelectric material

Conducting polymer thermoelectric (TE) materials have received great attention due to their unique properties. In this work, polypyrrole (PPy)/single-walled carbon nanotubes (SWCNTs) composite films with improved TE performance have been prepared by chemical interfacial polymerization at the cyclohexane/water interface under a controlled temperature. Attributed to the smooth surface, higher conjugation length and more ordered molecular structure of the interfacial polymerized PPy film, the electrical conductivity can be as high as ∼500 S cm⁻¹. To further enhance the TE properties of PPy, SWCNT was added to construct a PPy/SWCNTs composite. Due to the synergistic effect between the two phases and the energy filtering effect at the interfaces between PPy and SWCNTs, the Seebeck coefficient of the composite enhanced significantly with the increase SWCNTs content. The composite shows an optimal power factor of 37.6 ± 2.3 μW mK⁻² when the content of SWCNTs is 0.8 mg. This value is one of the largest values among the reported PPy based composites fabricated by the chemical polymerization method. The results indicate that interfacial polymerization under a controlled temperature is a promising way to improve the TE performance of conducting polymer based composite materials.

PPy/SWCNTs composite films with high thermoelectric performance were prepared by chemical interfacial polymerization under a controlled low temperature.

Decoupling electron and phonon transport in single-nanowire hybrid materials for high-performance thermoelectrics

Organic-inorganic hybrids have recently emerged as a class of high-performing thermoelectric materials that are lightweight and mechanically flexible. However, the fundamental electrical and thermal transport in these materials has remained elusive due to the heterogeneity of bulk, polycrystalline, thin films reported thus far. Here, we systematically investigate a model hybrid comprising a single core/shell nanowire of Te-PEDOT:PSS. We show that as the nanowire diameter is reduced, the electrical conductivity increases and the thermal conductivity decreases, while the Seebeck coefficient remains nearly constant-this collectively results in a figure of merit, ZT, of 0.54 at 400 K. The origin of the decoupling of charge and heat transport lies in the fact that electrical transport occurs through the organic shell, while thermal transport is driven by the inorganic core. This study establishes design principles for high-performing thermoelectrics that leverage the unique interactions occurring at the interfaces of hybrid nanowires.

Energy Harvesting and Storage with Soft and Stretchable Materials

This review highlights various modes of converting ambient sources of energy into electricity using soft and stretchable materials. These mechanical properties are useful for emerging classes of stretchable electronics, e-skins, bio-integrated wearables, and soft robotics. The ability to harness energy from the environment allows these types of devices to be tetherless, thereby leading to a greater range of motion (in the case of robotics), better compliance (in the case of wearables and e-skins), and increased application space (in the case of electronics). A variety of energy sources are available including mechanical (vibrations, human motion, wind/fluid motion), electromagnetic (radio frequency (RF), solar), and thermodynamic (chemical or thermal energy). This review briefly summarizes harvesting mechanisms and focuses on the materials' strategies to render such devices into soft or stretchable embodiments.

Blend Structure and n-Type Thermoelectric Performance of PA6/SAN and PA6/PMMA Blends Filled with Singlewalled Carbon Nanotubes

The present study investigates how the formation of melt-mixed immiscible blends based on PA6/SAN and PA6/PMMA filled with single walled nanotubes (SWCNTs) affects the thermoelectric (TE) properties. In addition to the detailed investigation of the blend morphology with compositions between 100/0 wt.% and 50/50 wt.%, the thermoelectric properties are investigated on blends with different SWCNT concentrations (0.25-3.0 wt.%). Both PA6 and the blend composites with the used type of SWCNTs showed negative Seebeck coefficients. It was shown that the PA6 matrix polymer, in which the SWCNTs are localized, mainly influenced the thermoelectric properties of blends with high SWCNT contents. By varying the blend composition, an increase in the absolute Seebeck coefficient, power factor (PF), and figure of merit (ZT) was achieved compared to the PA6 composite which is mainly related to the selective localization and enrichment of SWCNTs in the PA6 matrix at constant SWCNT loading. The maximum PFs achieved were 0.22 µW/m·K² for PA6/SAN/SWCNT 70/30/3 wt.% and 0.13 µW/m·K² for PA6/PMMA/SWCNT 60/40/3 wt.% compared to 0.09 µW/m·K² for PA6/3 wt.% SWCNT which represent increases to 244% and 144%, respectively. At higher PMMA or SAN concentration, the change from matrix-droplet to a co-continuous morphology started, which, despite higher SWCNT enrichment in the PA6 matrix, disturbed the electrical conductivity, resulting in reduced PFs with still increasing Seebeck coefficients. At SWCNT contents between 0.5 and 3 wt.% the increase in the absolute Seebeck coefficient was compensated by lower electrical conductivity resulting in lower PF and ZT as compared to the PA6 composites.

Sigmoidal Dependence of Electrical Conductivity of Thin PEDOT:PSS Films on Concentration of Linear Glycols as a Processing Additive

We investigate the sigmoidal concentration dependence of electrical conductivity of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) processed with linear glycol-based additives such as ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG), hexaethylene glycol (HEG), and ethylene glycol monomethyl ether (EGME). We observe that a sharp transition of conductivity occurs at the additive concentration of ~0.6 wt.%. EG, DEG, and TEG are effective in conductivity enhancement, showing the saturation conductivities of 271.8, 325.4, and 326.2 S/cm, respectively. Optical transmittance and photoelectron spectroscopic features are rather invariant when the glycols are used as an additive. Two different figures of merit, calculated from both sheet resistance and optical transmittance to describe the performance of the transparent electrodes, indicate that both DEG and TEG are two most effective additives among the series in fabrication of transparent electrodes based on PEDOT:PSS films with a thickness of ~50-60 nm.

Synergistically Optimized Electrical and Thermal Transport Properties in Copper Phthalocyanine-Based Organic Small Molecule with Nanoscale Phase Separations

A series of copper phthalocyanine (CuPc)-based organic small molecules were prepared through vapor-phase reaction. Nanoscale phase separation was observed with tunable CuPc and copper phthalocyaninato iodide (CuPcI) phase content by changing the iodine ratio. The Seebeck coefficient of the samples was significantly enhanced, which is considered to be attributed to the enhanced surface polarization effect due to the formation of a great number of nanoscale interfaces between the CuPc phase and the CuPcI phase. In addition, these nanointerfaces also gave rise to increased phonon scattering and therefore significantly reduced the lattice thermal conductivity of the small-molecule samples. As a result of the combination of the synergistically optimized electrical and thermal transport properties, the maximum ZT value reaches 3.0 × 10^-2 at room temperature, which is among the highest values for small-molecule charge-transfer complex reported so far. Our results shed light on optimizing the thermoelectric performance of organic small molecules by introducing nanoscale phase separations and tailoring the nanoscale interfaces.

Thermoelectric Characteristics of A Single-Crystalline Topological Insulator Bi2Se3 Nanowire

The discovery of topological insulators (TIs) has motivated detailed studies on their physical properties, especially on their novel surface states via strong spin-orbit interactions. However, surface-state-related thermoelectric properties are rarely reported, likely because of the involvement of their bulk-dominating contribution. In this work, we report thermoelectric studies on a TI bismuth selenide (Bi2Se3) nanowire (NW) that exhibit a larger surface/volume ratio. Uniform single-crystalline TI Bi2Se3 NWs were successfully synthesized using a stress-induced growth method. To achieve the study of the thermoelectric properties of a nanowire (NW), including electrical conductivity (σ), Seebeck coefficient (S), and thermal conductivity (κ), a special platform for simultaneously performing all measurements on a single wire was designed. The properties of σ, S, and κ of a 200 nm NW that was well precharacterized using transmission electron microscope (TEM) measurements were determined using the four-probe method, the two-probe EMF across ∇T measurement, and the 3ω technique, respectively. The integrated TE properties represented by the figure of merit ZT (S2σT/κ) were found to be in good agreement with a theoretical study of Bi2Se3 NW.

Boosting the performance of printed thermoelectric materials by inducing morphological anisotropy

Thermoelectrics can generate electrical energy from waste heat and work also as active coolers. However, their widespread use is hindered by their poor efficiency, which is aggravated by their costly and hard-to-scale fabrication process. Good thermoelectric performances require materials with high (low) electrical (thermal) conductivity. Inducing morphological anisotropy at the nanoscale holds promise to boost thermoelectric performances, in both inorganic and organic materials, by increasing the ratio electrical/thermal conductivity along a selected direction without strongly affecting the Seebeck coefficient. Recent advances in 2D/3D printed electronics are revealing new simple and inexpensive routes to fabricate thermoelectrics with the necessary morphological control to boost performance by inducing anisotropy.

High-Power All-Carbon Fully Printed and Wearable SWCNT-Based Organic Thermoelectric Generator

In this study, we introduce the fabrication process of a highly efficient fully printed all-carbon organic thermoelectric generator (OTEG) free of metallic junctions with outstanding flexibility and exceptional power output, which can be conveniently and rapidly prepared through ink dispensing/printing processes of aqueous and low-cost CNT inks with a mask-assisted specified circuit architecture. The optimal p-type and n-type films produced exhibit ultrahigh power factors (PFs) of 308 and 258 μW/mK², respectively, at ΔΤ = 150 K (T_HOT = 175 °C) and outstanding stability in air without encapsulation, providing the OTEG device the ability to operate at high temperatures up to 200 °C at ambient conditions (1 atm, relative humidity: 50 ± 5% RH). We have successfully designed and fabricated the flexible thermoelectric (TE) modules with superior TE properties of p-type and n-type SWCNT films resulting in exceptionally high performance. The novel design OTEG exhibits outstanding flexibility and stability with attained TE values among the highest ever reported in the field of organic thermoelectrics, that is, open-circuit voltage V_OC = 1.05 V and short-circuit current I_SC = 1.30 mA at ΔT = 150 K (T_HOT = 175 °C) with an internal resistance of R_TEG = 806 Ω, generating a 342 μW power output. It is also worth noting the remarkable PFs of 145 and 127 μW/mK² for the p-type and n-type films, respectively, at room temperature. The fabricated device is highly scalable, providing opportunities for printable large-scale manufacturing/industrial production of highly efficient flexible OTEGs.

Optimized Thermoelectric Performance of Carbon Nanoparticle-Carbon Nanotube Heterostructures by Tuning Interface Barrier Energy

Herein, thermoelectric carbon nanoparticle (CNP)-carbon nanotube (CNT) heterostructures are introduced as a promising flexible thermoelectric material. The optimal barrier energy between the CNP and CNT increases the Seebeck coefficient (S) of the heterostructures through the energy filtering effect. For optimized thermoelectric performance, the CNP-CNT barrier energy can be effectively tuned by controlling the work function of the CNPs. The optimized p-type CNP-CNT heterostructures exhibited S and power factor (PF) of 50.6 ± 1.4 μV K^-1 and 400 ± 26 μW m^-1 K^-2, respectively. The n-type CNP-CNT heterostructures, optimized for another work function of the CNPs, exhibited S and PF of up to -37.5 ± 3.4 μV K^-1 and 214 ± 42 μW m^-1 K^-2, respectively. The energy harvesting capability of a thermoelectric generator prepared using p- and n-type CNP-CNT heterostructures with optimized barrier energies is demonstrated. The thermoelectric generator with 10 p-type and 9 n-type thermoelectric elements exhibited a maximum output power of 0.12 μW from a ΔT of 5 K. This work shows a facile strategy for synthesizing thermoelectric CNP-CNT heterostructures with optimized energy filtering effects. Application to the thermoelectric device on a paper substrate is also discussed.

Thermal conductivity of benzothieno-benzothiophene derivatives at the nanoscale

We study by scanning thermal microscopy the nanoscale thermal conductance of films (40-400 nm thick) of [1]benzothieno[3,2-b][1]benzothiophene (BTBT) and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8). We demonstrate that the out-of-plane thermal conductivity is significant along the interlayer direction, larger for BTBT (0.63 ± 0.12 W m^-1 K^-1) compared to C8-BTBT-C8 (0.25 ± 0.13 W m^-1 K^-1). These results are supported by molecular dynamics calculations (approach to equilibrium molecular dynamics method) performed on the corresponding molecular crystals. The calculations point to significant thermal conductivity (3D-like) values along the 3 crystalline directions, with anisotropy factors between the crystalline directions below 1.8 for BTBT and below 2.8 for C8-BTBT-C8, in deep contrast with the charge transport properties featuring a two-dimensional character for these materials. In agreement with the experiments, the calculations yield larger values in BTBT compared to C8-BTBT-C8 (0.6-1.3 W m^-1 K^-1versus 0.3-0.7 W m^-1 K^-1, respectively). The weak thickness dependence of the nanoscale thermal resistance is in agreement with a simple analytical model.

Thermoelectric Ratchet Effect for Charge Carriers with Hopping Dynamics

We show that the huge Seebeck coefficients observed recently for ionic conductors arise from a ratchet effect where activated jumps between neighbor sites are rectified by a temperature gradient, thus driving mobile ions toward the cold. For complex systems with mobile molecules like water or polyethylene glycol, there is an even more efficient diffusiophoretic transport mechanism, proportional to the thermally induced concentration gradient of the molecular component. Without free parameters, our model describes experiments on the ionic liquid EMIM-TFSI and hydrated NaPSS, and it qualitatively accounts for polymer electrolyte membranes with Seebeck coefficients of hundreds of k_{B}/e.

Effect of Side Chain Substituent Volume on Thermoelectric Properties of IDT-Based Conjugated Polymers

A p-type thermoelectric conjugated polymer based on indacenodithiophene and benzothiadiazole is designed and synthesized by replacing normal aliphatic side chains (P1) with conjugated aromatic benzene substituents (P2). The introduced bulky substituent on P2 is detrimental to form the intensified packing of polymers, therefore, it hinders the efficient transporting of the charge carriers, eventually resulting in a lower conductivity compared to that of the polymers bearing aliphatic side chains (P1). These results reveal that the modification of side chains on conjugated polymers is crucial to rationally designed thermoelectric polymers with high performance.

Non-Iridescent Metal Nanomesh with Disordered Nanoapertures Fabricated by Phase Separation Lithography of Polymer Blend as Transparent Conductive Film

Metallic nanomesh, one of the emerging transparent conductive film (TCF) materials with both high electrical conductivity and optical transmittance, shows great potential to replace indium tin oxide (ITO) in optoelectronic devices. However, lithography-fabricated metallic nanomeshes suffer from an iridescence problem caused by the optical diffraction of periodic nanostructures, which has negative effects on display performance. In this work, we propose a novel approach to fabricate large-scale metallic nanomesh as TCFs on flexible polyethylene terephthalate (PET) sheets by maskless phase separation lithography of polymer blends in a low-cost and facile process. Polystyrene (PS)/polyphenylsilsequioxane (PPSQ) polymer blend was chosen as resist material for phase separation lithography due to their different etching selectivity under O₂ reactive ion etching (RIE). The PS constituent was selectively removed by O₂ RIE and the remained PPSQ nanopillars with varying sizes in random distribution were used as masks for further pattern transfer and metal deposition process. Gold (Au) nanomeshes with adjustable nanostructures were achieved after the lift-off step. Au nanomesh exhibited good optoelectronic properties (R_S = 41 Ω/sq, T = 71.9%) and non-iridescence, without angle dependence owing to the aperiodic structures of disordered apertures. The results indicate that this Au nanomesh has high potential application in high-performance and broad-viewing-angle optoelectronic devices.

A Light-Driven Vibrotactile Actuator with a Polymer Bimorph Film for Localized Haptic Rendering

A vibrotactile actuator driven by light energy is developed to produce dynamic stimulations for haptic rendering on a thin-film structure. The actuator is constructed by adopting a thermal bimorph membrane structure of poly(3,4-ethylenedioxythiophene) doped with p-toluenesulfonate (PEDOT-Tos) coated onto a polyethylene terephthalate (PET) film. Upon irradiation of near-infrared (NIR) light, the light energy absorbed at the PEDOT-Tos layer is converted into thermoelastic bending deformation due to the mismatch in coefficient of thermal expansion between PEDOT-Tos and PET. Since the light-induced deformation is reversible, spatially localized, and rapidly controllable with designed light signals, the proposed actuator can produce vibrotactile stimulation over 10 dB at arbitrary areas in the human-sensitive frequency range from 125 to 300 Hz using a low input power of ∼2.6 mW mm^-2, as compared with a complex electrical circuit and high input power needed to achieve such actuation performance. Together with its simple structure based on light-driven actuation, the advent of this actuator could open up new ways to achieve substantial advances in rendering textures at a flexible touch interface.

Solid-State Organic Electrolyte-Gated Transistors Based on Doping-Controlled Polymer Composites with a Confined Two-Dimensional Channel in Dry Conditions

We report comprehensive and comparative studies on chemical and electrochemical controls of doping characteristics of various poly(3,4-ethylenedioxythiophene) (PEDOT) composites complexed with sulfonates. Chemical treatment of PEDOT composites was conducted with a dedoping agent, tetrakis(dimethylamino)ethylene (TDAE), resulting in the changes in conformation and bulk charge-carrier density. Electrochemical control of doping states was done with a solid-state ionogel based on an ionic liquid dispersed in a polymer matrix. With this approach, we can fabricate solid-state organic electrolyte-gated transistors (OEGTs) with a large current modulation, a high mobility of holes, and a low driving voltage. Our OEGTs are operational in a dry environment and, surprisingly, form the two-dimensional channel of the interfacial charge carriers modulating the conductance under gate bias, unlike conventional liquid-based OEGTs. The charge-carrier mobility and the on-to-off current ratio reach up to ∼7 cm² V^-1 s^-1 and over 10⁴, respectively, from the chemically dedoped PEDOT composites. The ionogel-based gating of the layer of TDAE-treated PEDOT composites induces a reversible transition between a highly doped bipolaronic state and neutral/polaronic states, as revealed by the absorption profiles under gate bias. We also demonstrate in-plane OEGTs, in which the dedoped channel and the conductive source/drain electrodes are made of a single PEDOT composite layer.

Amphipathic Side Chain of a Conjugated Polymer Optimizes Dopant Location toward Efficient N-Type Organic Thermoelectrics

There is no molecular strategy for selectively increasing the Seebeck coefficient without reducing the electrical conductivity for organic thermoelectrics. Here, it is reported that the use of amphipathic side chains in an n-type donor-acceptor copolymer can selectively increase the Seebeck coefficient and thus increase the power factor by a factor of ≈5. The amphipathic side chain contains an alkyl chain segment as a spacer between the polymer backbone and an ethylene glycol type chain segment. The use of this alkyl spacer does not only reduce the energetic disorder in the conjugated polymer film but can also properly control the dopant sites away from the backbone, which minimizes the adverse influence of counterions. As confirmed by kinetic Monte Carlo simulations with the host-dopant distance as the only variable, a reduced Coulombic interaction resulting from a larger host-dopant distance contributes to a higher Seebeck coefficient for a given electrical conductivity. Finally, an optimized power factor of 18 µW m^-1 K^-2 is achieved in the doped polymer film. This work provides a facile molecular strategy for selectively improving the Seebeck coefficient and opens up a new route for optimizing the dopant location toward realizing better n-type polymeric thermoelectrics.

Persistent Conjugated Backbone and Disordered Lamellar Packing Impart Polymers with Efficient n-Doping and High Conductivities

Solution-processable highly conductive polymers are of great interest in emerging electronic applications. For p-doped polymers, conductivities as high a nearly 10⁵ S cm^-1 have been reported. In the case of n-doped polymers, they often fall well short of the high values noted above, which might be achievable, if much higher charge-carrier mobilities determined could be realized in combination with high charge-carrier densities. This is in part due to inefficient doping and dopant ions disturbing the ordering of polymers, limiting efficient charge transport and ultimately the achievable conductivities. Here, n-doped polymers that achieve a high conductivity of more than 90 S cm^-1 by a simple solution-based co-deposition method are reported. Two conjugated polymers with rigid planar backbones, but with disordered crystalline structures, exhibit surprising structural tolerance to, and excellent miscibility with, commonly used n-dopants. These properties allow both high concentrations and high mobility of the charge carriers to be realized simultaneously in n-doped polymers, resulting in excellent electrical conductivity and thermoelectric performance.

Quinoidal conjugated polymers with open-shell character

Quinoidal π-Conjugated polymers with open shell character represent an intriguing class of macromolecules in terms of both fundamental research and practical applications.

Copper Tetracyanoquinodimethane: From Micro/Nanostructures to Applications

Copper tetracyanoquinodimethane (CuTCNQ) has been investigated around 40 years as a representative bistable material. Meanwhile, micro/nanostructures of CuTCNQ is considered as the prototype of molecular electronics, which have attracted the world's attention and shown great potential applications in nanoelectronics. In this review, methods for synthesis of CuTCNQ micro/nanostructures are first summarized briefly. Then, the strategies for controlling morphologies and sizes of CuTCNQ micro/nanostructures are highlighted. Afterwards, the devices based on these micro/nanostructures are reviewed. Finally, an outlook of future research directions and challenges in this area is presented.

A Fibre-Optic Platform for Sensing Nitrate Using Conducting Polymers

Monitoring nitrate ions is essential in agriculture, food industry, health sector and aquatic ecosystem. We show that a conducting polymer, poly(3,4-ethylenedioxythiophene) (PEDOT), can be used for nitrate sensing through a process in which nitrate ion uptake leads to oxidation of PEDOT and change of its optical properties. In this study, a new platform is developed in which a single-mode fibre coated at the tip with PEDOT is used for nitrate sensing. A crucial step towards this goal is introduction of carbonate exposure to chemically reduced PEDOT to a baseline value. The proposed platform exhibits the change in optical behaviour of the PEDOT layer at the tip of the fibre as it undergoes chemical oxidation and reduction (redox). The change in optical properties due to redox switching varies with the intensity of light back reflected by the fibre coated with PEDOT. The proposed platform during oxidation demonstrates linear response for the uptake of nitrate ions in concentrations ranging between 0.2 and 40 parts per million (ppm), with a regression coefficient R2=0.97 and a detection limit of 6.7 ppm. The procedure for redox switching is repeatable as the back reflection light intensity reaches ±1.5% of the initial value after reduction.

Copper(I)-Based Flexible Organic-Inorganic Coordination Polymer and Analogues: High-Power Factor Thermoelectrics

We investigated the transport properties of the single layer and bulk copper(I) 4-hydroxythiophenolate (Cu(SC₆H₄OH)) coordination polymers and their analogues Cu(SeC₆H₄OH) and Cu(TeC₆H₄OH) on the basis of density functional calculations. We found that the bulk phases show superior power factors when compared with single-layer phases. This performance is comparable to the reported best organic thermoelectric candidates p-type poly(3.4-ethylenedioxythiophene) (PEDOT) and n-type poly[K_x(Ni-ett)] (ett = ethylenetetrathiolate). The non-parabolic conduction band minimum of Cu(SeC₆H₄OH) along the x direction can decouple the transport quantities, Seebeck coefficient, and electrical conductivity to achieve the highest power factor among all the candidates.