The new age of carbon nanotubes: an updated review of functionalized carbon nanotubes in electrochemical sensors

Globular Shaped Polypyrrole Doped Well-Dispersed Functionalized Multiwall Carbon Nanotubes/Nafion Composite for Enzymatic Glucose Biosensor Application

Herein, we report preparation of a bio-nanohybrid material of homogenously dispersed functionalized multiwall carbon nanotubes (fMWCNTs) in Nafion (Nf) doped with polypyrrole (PPy) and followed by one-step in situ electrochemical polymerization along with glucose oxidase (GOx) on a platinum (Pt) electrode. The bioengineered Nf-GOx-fMWCNTs-PPy/Pt electrode showed excellent electrocatalytic performance to detect glucose with a high sensitivity (54.2 μAmM⁻¹ cm⁻²) in linear range of up to 4.1 mM as well as a low detection limit of 5 μM (S/N = 3), response time within 4 s, good selectivity, stability, and practical applicability. It is our hope that the comprehensive results will contribute to design an efficient glucose biosensor with practical prospects for biomedical applications.

Nano-therapeutics: A revolution in infection control in post antibiotic era

With the arrival of antibiotics 70 years ago, meant a paradigm shift in overcoming infectious diseases. For decades, drugs have been used to treat different infections. However, with time bacteria have become resistant to multiple antibiotics, making some diseases difficult to fight. Nanoparticles (NPs) as antibacterial agents appear to have potential to overcome such problems and to revolutionize the diagnosis and treatment of bacterial infections. Therefore, there is significant interest in the use of NPs to treat variety of infections, particularly caused by multidrug-resistant (MDR) strains. This review begins with illustration of types of NPs followed by the literature of current research addressing mechanisms of NPs antibacterial activity, steps involved in NP mediated drug delivery as well as areas where NPs use has potential to improve the treatment, like NP enabled vaccination. Besides, recently emerged innovative NP platforms have been highlighted and their progress made in each area has been reviewed.

A high-performance enzyme entrapment platform facilitated by a cationic polymer for the efficient electrochemical sensing of ethanol

An efficient enzyme entrapment approach using a cationic polymer has been demonstrated for the development of a high-performance ethanol biosensor.

Novel carbon nanotube (CNT)-based ultrasensitive sensors for trace mercury(II) detection in water: A review

Infamous for "Mad hatter syndrome" and "Minamata disease", mercury (Hg) is ranked high on the Agency for Toxic Substances and Disease Registry's priority list of hazardous substances for its potent neurologic, renal, and developmental toxicities. Most typical exposures are via contaminated water and food. Although regulations and advisories are exercised at various levels, Hg pollution from both natural and anthropogenic sources has remained a major public health and safety concern. Rapid detection of solvated aqueous Hg²⁺ ions at low levels is critical for immediate response and protection of those who are vulnerable (young children, pregnant and breast-feeding women) to acute and chronic exposures to Hg²⁺. Various types of sensors capable of detecting Hg in water have been developed. In particular, the novel use of engineered carbon nanotubes (CNTs) has garnered attention due to their specificity and sensitivity towards Hg²⁺ detection in solution. In this focused review, we describe the sensitivity, selectivity and mechanisms of Hg²⁺ ion sensing at trace levels by employing CNT-based various sensor designs, and appraise the open literature on the currently applied and "proof-of-concept" methods. Five different types of CNT-based sensor systems are described: potentiometric, DNA-based fluorescence, surface plasmon resonance (SPR), colorimetric, and stripping voltammetric assays. In addition, the recognized merits and shortcomings for each type of electrochemical sensors are discussed. The knowledge from this succinct review shall guide the development of the next generation CNT-based biochemical sensors for rapid Hg²⁺ detection in the environment, which is a significant first step towards human health risk analysis of this legacy toxicant.

Nanoscale Electrocatalysis of Hydrazine Electro-Oxidation at Blistered Graphite Electrodes

There is great interest in finding and developing new, efficient, and more active electrocatalytic materials. Surface modification of highly oriented pyrolytic graphite, through the introduction of surface "blisters", is demonstrated to result in an electrode material with greatly enhanced electrochemical activity. The increased electrochemical activity of these blisters, which are produced by electro-oxidation in HClO₄, is revealed through the use of scanning electrochemical cell microscopy (SECCM), coupled with complementary techniques (optical microscopy, field emission-scanning electron microscopy, Raman spectroscopy, and atomic force microscopy). The use of a linear sweep voltammetry (LSV)-SECCM scan regime allows for dynamic electrochemical mapping, where a voltammogram is produced at each pixel, from which movies consisting of spatial electrochemical currents, at a series of applied potentials, are produced. The measurements reveal significantly enhanced electrocatalytic activity at blisters when compared to the basal planes, with a significant cathodic shift in the onset potential of the hydrazine electro-oxidation reaction. The improved electrochemical activity of the hollow structure of blistered graphite could be explained by the increased adsorption of protonated hydrazine at oxygenated defect sites, the ease of ion-solvent intercalation/deintercalation, and the reduced susceptibility to N₂ nanobubble attachment (as a product of the reaction). This study highlights the capability of electrochemistry to tailor the surface structure of graphite and presents a new electrocatalyst for hydrazine electro-oxidation.

Development of a Nafion/MWCNT-SPCE-Based Portable Sensor for the Voltammetric Analysis of the Anti-Tuberculosis Drug Ethambutol

Herein we describe the development, characterization and application of an electrochemical sensor based on the use of Nafion/MWCNT-modified screen-printed carbon electrodes (SPCEs) for the voltammetric detection of the anti-tuberculosis (anti-TB) drug ethambutol (ETB). The electrochemical behaviour of the drug at the surface of the developed Nafion/MWCNT-SPCEs was studied through cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques. Electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) were employed to characterize the modified surface of the electrodes. Results showed that, compared to both unmodified and MWCNTs-modified SPCEs, negatively charged Nafion/MWCNT-SPCEs remarkably enhanced the electrochemical sensitivity and selectivity for ETB due to the synergistic effect of the electrostatic interaction between cationic ETB molecules and negatively charged Nafion polymer and the inherent electrocatalytic properties of both MWCNTs and Nafion. Nafion/MWCNT-SPCEs provided excellent biocompatibility, good electrical conductivity, low electrochemical interferences and a high signal-to-noise ratio, providing excellent performance towards ETB quantification in microvolumes of human urine and human blood serum samples. The outcomes of this paper confirm that the Nafion/MWCNT-SPCE-based device could be a potential candidate for the development of a low-cost, yet reliable and efficient electrochemical portable sensor for the low-level detection of this antimycobacterial drug in biological samples.

Carbon nanotube modification of microbial fuel cell electrodes

The use of carbon nanotubes (CNTs) for energy harvesting devices is preferable due to their unique mechanical, thermal, and electrical properties. On the other hand, microbial fuel cells (MFCs) are promising devices to recover carbon-neutral energy from the organic matters, and have been hindered with major setbacks towards commercialization. Nanoengineered CNT-based materials show remarkable electrochemical properties, and therefore have provided routes towards highly effective modification of MFC compartments to ultimately reach the theoretical limits of biomass energy recovery, low-cost power production, and thus the commercialization of MFCs. Moreover, these CNT-based composites offer significant flexibility in the design of MFCs that enable their use for a broad spectrum of applications ranging from scaled-up power generation to medically related devices. This article reviews the recent advances in the modification of MFCs using CNTs and CNT-based composites, and the extent to which each modification route impacts MFC power and current generation.

Electrochemical Redox Switchable Dispersion of Single-Walled Carbon Nanotubes in Water

We present a new, efficient approach to achieve superior dispersibility of single-walled carbon nanotubes (SWNTs) in water by integrating reversible host-guest interaction and π-π stacking. In this approach, β-cyclodextrin (β-CD) was first modified with a pyrene group to be adsorbed onto the wall of pristine SWNTs via π-π stacking, followed by further functionalization with ferrocene (Fc)-terminated water-soluble poly(ethylene glycol) (PEG) through supramolecular host-guest interaction between β-CD and Fc. Upon alternate electrochemical oxidative/reductive stimuli, the reversible host-guest pair enabled the PEG-Fc@Py-CD@SWNTs to exhibit switchable conversion between dispersion and aggregation states. Electric field controllable PEG-Fc@Py-CD@SWNTs with good reversibility and intact nanotube structure may find potential applications in selective screening of SWNTs, biosensors, and targeted drug delivery.

Carbon Nanotube Paper-Based Electroanalytical Devices

Here, we report on carbon nanotube paper-based electroanalytical devices. A highly aligned-carbon nanotube (HA-CNT) array, grown using chemical vapor deposition (CVD), was processed to form bi-layered paper with an integrated cellulose-based Origami-chip as the electroanalytical device. We used an inverse-ordered fabrication method from a thick carbon nanotube (CNT) sheet to a thin CNT sheet. A 200-layered HA-CNT sheet and a 100-layered HA-CNT sheet are explored as a working electrode. The device was fabricated using the following methods: (1) cellulose-based paper was patterned using a wax printer, (2) electrical connection was made using a silver ink-based circuit printer, and (3) three electrodes were stacked on a 2D Origami cell. Electrochemical behavior was evaluated using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). We believe that this platform could attract a great deal of interest for use in various chemical and biomedical applications.

Vertically Aligned Nitrogen-Doped Carbon Nanotube Carpet Electrodes: Highly Sensitive Interfaces for the Analysis of Serum from Patients with Inflammatory Bowel Disease

The number of patients suffering from inflammatory bowel disease (IBD) is increasing worldwide. The development of noninvasive tests that are rapid, sensitive, specific, and simple would allow preventing patient discomfort, delay in diagnosis, and the follow-up of the status of the disease. Herein, we show the interest of vertically aligned nitrogen-doped carbon nanotube (VA-NCNT) electrodes for the required sensitive electrochemical detection of lysozyme in serum, a protein that is up-regulated in IBD. To achieve selective lysozyme detection, biotinylated lysozyme aptamers were covalently immobilized onto the VA-NCNTs. Detection of lysozyme in serum was achieved by measuring the decrease in the peak current of the Fe(CN)6(3-/4-) redox couple by differential pulse voltammetry upon addition of the analyte. We achieved a detection limit as low as 100 fM with a linear range up to 7 pM, in line with the required demands for the determination of lysozyme level in patients suffering from IBD. We attained the sensitive detection of biomarkers in clinical samples of healthy patients and individuals suffering from IBD and compared the results to a classical turbidimetric assay. The results clearly indicate that the newly developed sensor allows for a reliable and efficient analysis of lysozyme in serum.

Composite Hydrogels for Bone Regeneration

Over the past few decades, bone related disorders have constantly increased. Among all pathological conditions, osteoporosis is one of the most common and often leads to bone fractures. This is a massive burden and it affects an estimated 3 million people only in the UK. Furthermore, as the population ages, numbers are due to increase. In this context, novel biomaterials for bone fracture regeneration are constantly under development. Typically, these materials aim at favoring optimal bone integration in the scaffold, up to complete bone regeneration; this approach to regenerative medicine is also known as tissue engineering (TE). Hydrogels are among the most promising biomaterials in TE applications: they are very flexible materials that allow a number of different properties to be targeted for different applications, through appropriate chemical modifications. The present review will focus on the strategies that have been developed for formulating hydrogels with ideal properties for bone regeneration applications. In particular, aspects related to the improvement of hydrogels' mechanical competence, controlled delivery of drugs and growth factors are treated in detail. It is hoped that this review can provide an exhaustive compendium of the main aspects in hydrogel related research and, therefore, stimulate future biomaterial development and applications.

Recent advances in organic–inorganic well-defined hybrid polymers using controlled living radical polymerization techniques

Controlled living radical polymerizations, such as ATRP and RAFT polymerization, could be utilized for the preparation of well-defined organic–inorganic hybrid polymers based on POSS, PDMS, silica nanoparticles, graphene, CNTs and fullerene.

Graphite pencil electrodes as electrochemical sensors for environmental analysis: a review of features, developments, and applications

Graphite pencil electrodes (GPEs) are carbon-based electrodes that are recognized by their low cost, simplicity, commercial availability, ease of modification and disposability.

Selective molecular recognition on calixarene-functionalized 3D surfaces

Calixarene based various 3D surface materials with unique signal amplification in molecular recognition are presented, including quantum dots (QDs), metal nanoparticles (NPs), nanotubes, and mesoporous silica.

Surface molecularly imprinted electrochemical sensor for phenol based on SiO2 nanoparticles

A novel surface molecularly imprinted electrochemical sensor for the recognition and detection of phenol was constructed. It has a specific recognition ability for phenol over other phenolic compounds for real samples with excellent repeatability.

Construction of superhydrophilic and under-water superoleophobic carbon-based membranes for water purification

A novel hybrid Ag/PAA-CNTs membrane with oil/water separation performance and antibacterial functions is presented, which may open a new window to achieve multifunctional materials for water treatment.

Dramatically enhancing the yield of carbon nanotubes by simply adding oxygen-containing molecules in solid-state synthesis

Commercially available oxygen-containing molecules are utilized to enhance the yield of carbon nanotubes in the solid-state pyrolysis of organometallic precursors.

Under the lens: carbon nanotube and protein interaction at the nanoscale

The combination of the very different chemical natures of carbon nanotubes (CNTs) and proteins gives rise to systems with unprecedented performance, thanks to a rich pool of very diverse chemical, electronic, catalytic and biological properties. Here we review recent advances in the field, including innovative and imaginative aspects from a nanoscale point of view. The tubular nature of CNTs allows for internal protein encapsulation, and also for their external coating by protein cages, affording bottom-up ordering of molecules in hierarchical structures. To achieve such complex systems it is imperative to master the intermolecular forces between CNTs and proteins, including geometry effects (e.g. CNT diameter and curvature) and how they translate into changes in the local environment (e.g. water entropy). The type of interaction between proteins and CNTs has important consequences for the preservation of their structure and, in turn, function. This key aspect cannot be neglected during the design of their conjugation, be it covalent, non-covalent, or based on a combination of both methods. The review concludes with a brief discussion of the very many applications intended for CNT-protein systems that go across various fields of science, from industrial biocatalysis to nanomedicine, from innovative materials to biotechnological tools in molecular biology research.

Recent trends in carbon nanomaterial-based electrochemical sensors for biomolecules: A review

Carbon nanomaterials are advantageous for electrochemical sensors because they increase the electroactive surface area, enhance electron transfer, and promote adsorption of molecules. Carbon nanotubes (CNTs) have been incorporated into electrochemical sensors for biomolecules and strategies have included the traditional dip coating and drop casting methods, direct growth of CNTs on electrodes and the use of CNT fibers and yarns made exclusively of CNTs. Recent research has also focused on utilizing many new types of carbon nanomaterials beyond CNTs. Forms of graphene are now increasingly popular for sensors including reduced graphene oxide, carbon nanohorns, graphene nanofoams, graphene nanorods, and graphene nanoflowers. In this review, we compare different carbon nanomaterial strategies for creating electrochemical sensors for biomolecules. Analytes covered include neurotransmitters and neurochemicals, such as dopamine, ascorbic acid, and serotonin; hydrogen peroxide; proteins, such as biomarkers; and DNA. The review also addresses enzyme-based electrodes that are used to detect non-electroactive species such as glucose, alcohols, and proteins. Finally, we analyze some of the future directions for the field, pointing out gaps in fundamental understanding of electron transfer to carbon nanomaterials and the need for more practical implementation of sensors.

Magnetically aligned iron oxide/gold nanoparticle-decorated carbon nanotube hybrid structure as a humidity sensor

Functionalized carbon nanotubes (f-CNTs), particularly CNTs decorated with nanoparticles (NPs), are of great interest because of their synergic effects, such as surface-enhanced Raman scattering, plasmonic resonance energy transfer, magnetoplasmonic, magnetoelectric, and magnetooptical effects. In general, research has focused on a single type of NP, such as a metal or metal oxide, that has been modified on a CNT surface. In this study, however, a new strategy is introduced for the decoration of two different NP types on CNTs. In order to improve the functionality of modified CNTs, we successfully prepared binary NP-decorated CNTs, namely, iron oxide/gold (Au) NP-decorated CNTs (IA-CNTs), which were created through two simple reactions in deionized water, without high temperature, high pressure, or harsh reducing agents. The physicochemical properties of IA-CNTs were characterized by ultraviolet/visible spectroscopy, Fourier transform infrared spectroscopy, a superconducting quantum interference device, scanning electron microscopy, and transmission electron microscopy. In this study, IA-CNTs were utilized to detect humidity. Magnetic IA-CNTs were aligned on interdigitated platinum electrodes under external magnetic fields to create a humidity-sensing channel, and its electrical conductivity was monitored. As the humidity increased, the electrical resistance of the sensor also increased. In comparison with various gases, for example, H2, O2, CO, CO2, SO2, and dry air, the IA-CNT-based humidity sensor exhibited high-selectivity performances. IA-CNTs also responded to heavy water (D2O), and it was established that the humidity detection mechanism had D2O-sensing capabilities. Further, the humidity from human out-breathing was also successfully detected by this system. In conclusion, these unique IA-CNTs exhibited potential application as gas detection materials.

Facile synthesis of MnO2/carbon nanotubes decorated with a nanocomposite of Pt nanoparticles as a new platform for the electrochemical detection of catechin in red wine and green tea samples

Herein, we report a simple and facile synthesis strategy of MnO₂/carbon nanotubes decorated with a nanocomposite of Pt nanoparticles using a simple electrodeposition method. The Pt/MnO₂/f-MWCNT modified electrode were characterized by several analytical and spectroscopy techniques and were adopted as a composite for a novel catechin sensor. The as-prepared Pt/MnO₂/f-MWCNT modified glassy carbon electrode (GCE) exhibited a smaller peak potential separation (ΔE_p), and electron transfer kinetics during the oxidation reaction of catechin. This can be attributed to the larger effective surface area, greater porosity, and more reactive sites on the Pt/MnO₂/f-MWCNT-modified GCE. Notably, we achieved a very low detection limit (under optimized conditions) of catechin ca. 0.02 μM (S/N = 3); the linear range is 2-950 μM with excellent sensitivity. The real time application of catechin in red wine, black tea, and green tea samples with excellent performance. The proposed sensor was successfully developed and the advantages of low cost, ease of preparation, long-term stability, and good reproducibility were demonstrated which are superior to recently reported modified electrodes, thereby enabling practical industrial applications.