DYNAMERS: dynamic polymers as self-healing materials

A Photoinduced Dual-Wavelength Approach for 3D Printing and Self-Healing of Thermosetting Materials

Vat photopolymerization-based 3D printing techniques have been widely used to produce high-resolution 3D thermosetting materials. However, the lack of repairability of these thermosets leads to the production of waste. In this study, reversible addition fragmentation chain transfer (RAFT) agents are incorporated into resin formulations to allow visible light (405 nm) mediated 3D printing of materials with self-healing capabilities. The self-healing process is based on the reactivation of RAFT agent embedded in the thermosets under UV light (365 nm), which enables reformation of the polymeric network. The self-healing process can be performed at room temperature without prior deoxygenation. The impact of the type and concentration of RAFT agents in the polymer network on the healing efficiency is explored. Resins containing RAFT agents enable 3D printing of thermosets with self-healing properties, broadening the scope of future applications for polymeric thermosets in various fields.

A network model of transient polymers: exploring the micromechanics of nonlinear viscoelasticity

Dynamic networks contain crosslinks that re-associate after disconnecting, imparting them with viscoelastic properties. While continuum approaches have been developed to analyze their mechanical response, these approaches can only describe their evolution in an average sense, omitting local, stochastic mechanisms that are critical to damage initiation or strain localization. To address these limitations, we introduce a discrete numerical model that mesoscopically coarse-grains the individual constituents of a dynamic network to predict its mechanical and topological evolution. Each constituent consists of a set of flexible chains that are permanently cross-linked at one end and contain reversible binding sites at their free ends. We incorporate nonlinear force-extension of individual chains via a Langevin model, slip-bond dissociation through Eyring's model, and spatiotemporally-dependent bond attachment based on scaling theory. Applying incompressible, uniaxial tension to representative volume elements at a range of constant strain rates and network connectivities, we then compare the mechanical response of these networks to that predicted by the transient network theory. Ultimately, we find that the idealized continuum approach remains suitable for networks with high chain concentrations when deformed at low strain rates, yet the mesoscale model proves necessary for the exploration of localized stochastic events, such as variability of the bond kinetics, or the nucleation of micro-cavities that likely conceive damage and fracture.

The Chemical Recycling of Polyesters for a Circular Plastics Economy: Challenges and Emerging Opportunities

Whilst plastics have played an instrumental role in human development, growing environmental concerns have led to increasing public scrutiny and demands for outright bans. This has stimulated considerable research into renewable alternatives, and more recently, the development of alternative waste management strategies. Herein, the aim was to highlight recent developments in the catalytic chemical recycling of two commercial polyesters, namely poly(lactic acid) (PLA) and poly(ethylene terephthalate) (PET). The concept of chemical recycling is first introduced, and associated opportunities/challenges are discussed within the context of the governing depolymerisation thermodynamics. Chemical recycling methods for PLA and PET are then discussed, with a particular focus on upcycling and the use of metal-based catalysts. Finally, the attention shifts to the emergence of new materials with the potential to modernise the plastics economy. Emerging opportunities and challenges are discussed within the context of industrial feasibility.

Application of self-healing, swellable and biodegradable polymers for wound treatment

AIM

Self-healing, swellable and biodegradable polymers are vital materials that may facilitate the different stages of wound healing. The aim of this research was to prepare wound healing films using self-healing polyvinyl alcohol (PVA), swellable hydroxypropyl methylcellulose (HPMC), biodegradable polyglycolic acid (PGA) sutures and ciprofloxacin antibiotic for improved treatment outcome.

METHODS

Films were formulated through aqueous-based mixing of varying amounts of polyvinyl alcohol (10-20% weight/weight (w/w)) and hydroxypropyl methylcellulose (0.5, 1% w/w) with fixed quantities of ciprofloxacin. PGA sutures were placed as grids within the wet mixtures of the polymers and ciprofloxacin, and thereafter products were air dried. The formulated films were evaluated for swelling ratio, breaking elongation, folding endurance, moisture uptake and loss, compatibility and in vitro antibiotic release. Furthermore, in vivo wound healing was studied using excision model and histopathological examinations.

RESULTS

Swelling ratios were above 1.0 and the films were minimally stretchable, with folding endurance greater than 500. Films were stable while moisture uptake and loss were observed to be less than 30%. Among the optimised hydrogel batches, those containing 10% w/w PVA and 1% w/w HPMC with no PGA showed the highest drug release of 73%, whereas the batches with higher PGA content showed higher percentage wound size reduction with minimal scar. The completeness of wound healing with batches containing PVA, HPMC, ciprofloxacin and PGA, along with the standard, is evident considering the massive cornification, regeneration of the epithelial front and stratum spinosum.

CONCLUSION

The findings show that polymer-based multifunctional composite films are suitable for use as dressings for improved wound healing.

Biological Tissue-Inspired Living Self-Healing Hydrogels Based on Cadherin-Mediated Specific Cell-Cell Adhesion

Regarding synthetic self-healing materials, as healing reactions occur at the molecular level, bond formation occurs when healing chemicals are nanometer distances apart. However, motility of healing chemicals in materials is quite limited, permitting only passive diffusion, which reduces the chance of bond formation. By contrast, biological-tissues exhibit significant high-performance self-healing, and cadherin-mediated cell-cell adhesion is a key mechanism in the healing process. This is because cells are capable of a certain level of motility and actively migrate to damage sites, thereby achieving cell-cell adhesion with high efficacy. Here, we report biological-tissue-inspired, self-healing hydrogels in which azide-modified living cells are covalently cross-linked with alkyne-modified alginate polymers via bioorthogonal reactions. As a proof-of-concept, we demonstrate their unique self-healing capabilities originating from cadherin-mediated adhesion between cells incorporated into the gels as mobile healing mechanism. This study provides an example of self-healing material incorporating living components into a synthetic material to promote self-healing.

Aggregation-Induced Emission-Active Gels: Fabrications, Functions, and Applications

Chromophores that exhibit aggregation-induced emission (i.e., aggregation-induced emission luminogens [AIEgens]) emit intense fluorescence in their aggregated states, but show negligible emission as discrete molecular species in solution due to the changes in restriction and freedom of intramolecular motions. As solvent-swollen quasi-solids with both a compact phase and a free space, gels enable manipulation of intramolecular motions. Thus, AIE-active gels have attracted significant interest owing to their various distinctive properties and promising application potential. Herein, a comprehensive overview of AIE-active gels is provided. The fabrication strategies employed are detailed, and the applications of AIEgens are summarized. In addition, the gel functions arising from the AIE moieties are revealed, along with their structure-property relationships. Furthermore, the applications of AIE-active gels in diverse areas are illustrated. Finally, ongoing challenges and potential means to address them are discussed, along with future perspectives on AIE-active gels, with the overall aim of inspiring research on novel materials and ideas.

Theoretical Characterization of New Frustrated Lewis Pairs for Responsive Materials

In recent years, responsive materials including dynamic bonds have been widely acclaimed due to their expectation to pilot advanced materials. Within these materials, synthetic polymers have shown to be good candidates. Recently, the so-called frustrated Lewis pairs (FLP) have been used to create responsive materials. Concretely, the activation of diethyl azodicarboxylate (DEAD) by a triphenylborane (TPB) and triphenylphosphine (TPP) based FLP has been recently exploited for the production of dynamic cross-links. In this work, we computationally explore the underlying dynamic chemistry in these materials, in order to understand the nature and reversibility of the interaction between the FLP and DEAD. With this goal in mind, we first characterize the acidity and basicity of several TPB and TPP derivatives using different substituents, such as electron-donating and electron-withdrawing groups. Our results show that strong electron-donating groups increase the acidity of TPB and decrease the basicity of TPP. However, the FLP–DEAD interaction is not mainly dominated by the influence of these substituents in the acidity or basicity of the TPB or TPP systems, but by attractive or repulsive forces between substituents such as hydrogen bonds or steric effects. Based on these results, a new material is proposed based on FLP–DEAD complexes.

Metal Cation-Driven Dynamic Covalent Formation of Imine and Hydrazone Ligands Displaying Synergistic Co-catalysis and Auxiliary Amine Effects

Optimizing C=N bond formation and C/N component exchange has major significance in Dynamic Covalent Chemistry (DCC). Imine and hydrazone generation from their aldehyde, amine and hydrazine components showed large accelerations in presence of AgOTf or Zn(OTf)₂ , up to 10⁴ for the Zn(II)-(p-anisidine)imine complex. Zn(OTf)₂ and auxiliary p-anisidine together accelerated 630 times the formation of the Zn(II)-hydrazone complex, revealing a strong synergistic effect, traced to very fast initial formation of the reactive Zn(II)-imine complex presenting a C=N bond metallo-activated towards reaction with the hydrazine component. Reactions involving more entities showed kinetically faster and thermodynamically simpler outputs due to dynamic competition within a mixture of higher complexity. Catalytic amounts of metal salts and auxiliary amine gave similar marked rate accelerations and turnover, indicating true catalysis. The synergistic effect achieved by combining metallo- and organo-catalysis points to a powerful co-catalysis strategy of bond-formation in DCC through interconnected chemical transformations.

Heat- and Light-Responsive Materials Through Pairing Dynamic Thiol-Michael and Coumarin Chemistry

Covalent adaptable networks (CANs) based on the thiol-Michael (TM) linkages can be thermal and pH responsive. Here, a new vinyl-sulfone-based thiol-Michael crosslinker is synthesized and incorporated into acrylate-based CANs to achieve stable materials with dynamic properties. Because of the reversible TM linkages, excellent temperature-responsive re-healing and malleability properties are achieved. In addition, for the first time, a photoresponsive coumarin moiety is incorporated with TM-based CANs to introduce light-mediated reconfigureability and postpolymerization crosslinking. Overall, these materials can be on demand dynamic in response to heat and light but can retain mechanical stability at ambient condition.

Folding fluorescent probes for self-reporting transesterification in dynamic polymer networks

Dynamic exchange reactions in covalent adaptable networks (CANs) are difficult to probe directly via various macroscopic mechanical methods. Herein, we report a fluorescent strategy for directly reporting the dynamic bond exchange in transesterification-based CANs by using folding molecular probes. The folding probes (PDI-dimers) consist of two perylene diimide (PDI) cores, a spacer of dynamic esters between the two PDI cores, and reactive terminal groups. During transesterification in CANs, the PDI-dimers unfold their PDI excimers to show a sharp fluorescent color change from orange to bright yellow. This visual strategy is demonstrated by a crosslinked thiol-Michael network (TMN) and poly(4-hydroxybutyl acrylate) network (PHBA). The dynamic behaviors like stress relaxation and self-stiffening in these CANs can be directly read out via the change of fluorescent color. This method can provide quantitative information and show spatiotemporal resolution and therefore, can be applied to probe various dynamic chain exchange mechanisms in crosslinked materials.

A NIR laser induced self-healing PDMS/Gold nanoparticles conductive elastomer for wearable sensor

Self-healing conductive elastomers have been widely used in smart electronic devices, such as wearable sensors. However, nano fillers hinder the flow of polymer segments, which make the development of conductive elastomer with rapid repair and high ductility a challenge. In this work, thioctic acid (TA) was grafted onto amino-modified polysiloxane (PDMS-NH₂) by dehydration condensation of amino group and carboxyl group. By introducing gold nanoparticles, a dynamic network based on S-Au interaction was constructed. The dynamic gold cross-linking could effectively dissipate the energy exerted by external force and improve the extensibility of conductive elastomer. In addition, S-Au interaction had a good optothermal effect, so that the elastomer rapidly healed under NIR irradiation, and the repair efficiency reached 92%. We further evaluated the performance of the conductive elastomer as a strain sensor. The sample could accurately monitor the bending of human joints and small muscle state changes. This kind of self-healable conductive elastomer based on dynamic S-Au interaction has great potential in the fields of interpersonal interaction and health monitoring.

Double-Network Heparin Dynamic Hydrogels: Dynagels as Anti-bacterial 3D Cell Culture Scaffolds

Double cross-linked dynamic hydrogels, dynagels, have been prepared through reversible imine bonds and supramolecular interactions, which showed good pH responsiveness, injectability, self-healing property and biocompatibility. With the further encapsulation of heparin, the obtained hydrogels exhibited good anti-bacterial activity and promotion effects for 3D cell culture.

Stretchable, self-healable integrated conductor based on mechanical reinforced graphene/polyurethane composites

Stretchable conductors are susceptible to wear through repeated deformation over time. Stretchable conductors with self-healing properties can increase longevity and reduce safety hazards. However, most current self-healing conductors can only repair either the conductive layer or the insulating layer. Meantime, high mechanical robustness and self-healing efficiency are exclusive especially at ambient conditions. Realizing a stretchable conductor with integral self-healing and ultra-high mechanical strength is challenging, because this requires good interfacial compatibility and adaptability of the conductive and insulating layers. We adapt a biphasic dynamic network strategy to add toughness to self-healing materials. The DOU (dimethylglyoxime-urethane polyurethane) dynamic bonds and hydrogen bonds in the soft phase enable high self-healing efficiency, while the graphene as a hard phase supports the material's superior mechanical properties. We have prepared an overall self-healing stretchable conductor through the soft phase as a self-encapsulating insulating layer. This all-solid (Tg = -49.5 °C) graphene/dimethylglyoxime-urethane polyurethane (Gr/DOU-PU) composites characteristic of both high mechanical strength (~6 MPa, ~1000%, ~48 MJ m^-3), self-healing conductivity (~90%, 10 min, 25 °C) and conductivity (R□=47.8 Ω □^-1, d = 0.4 mm). The conductor has excellent stability for flexible electronics and for building stress sensors.

Hydrogen Bonding in Self-Healing Elastomers

In the past decade, the self-healing elastomers based on multiple hydrogen bonding have attracted ample attention due to their rich chemical structures, adjustable mechanical properties, fast healing speed, and high healing efficiency. Through prolonging the service life and fast recovery of the mechanical properties, self-healing elastomers can be potentially applied in the field of wearable electronics, electronic skins, motion tracking, and health monitoring. In this perspective, we will introduce the concept and classification of self-healing materials first, then the hydrogen bonds, and the corresponding position of hydrogen-bonding units in the polymer structures. We will also conclude the potential application of hydrogen bonding-based elastomers. Finally, a summary and outlook will be provided.

A Fast Room-Temperature Self-Healing Glassy Polyurethane

We designed and synthesized a colorless transparent glassy polyurethane assembled using low-molecular-weight oligomers carrying a large number of loosely packed weak hydrogen bonds (H-bonds), which has a glass transition temperature (T_g ) up to 36.8 °C and behaves unprecedentedly robust stiffness with a tensile Young's modulus of 1.56±0.03 GPa. Fast room-temperature self-healing was observed in this polymer network: the broken glassy polyurethane (GPU) specimen can recover to a tensile strength up 7.74±0.76 MPa after healing for as little as 10 min, which is prominent compared to reported room-temperature self-healing polymers. The high density of loose-packed hydrogen bonds can reversibly dissociate/associate below T_g of GPU (that is secondary relaxation), which enables the reconfiguration of the damaged network in the fractured interfaces, despite the extremely slow diffusion dynamics of molecular chains under room temperature. This GPU shows potential application as an optical lens.

Reversible and Stable Hemiaminal Hydrogels from Polyvinylamine and Highly Reactive and Selective Bis(N-acylpiperidone)s

Water-soluble bis(N-acylpiperidone)s with aldehyde-like reactivity are reported to react rapidly with polyvinylamine at room temperature, providing unprecedented clean reaction products. Unlike most amine/ketone reactions that result in arbitrary mixtures of imines, aminals, hemiaminals, or hydrates, in the present study hemiaminals, aminals, or hemiaminal/aminal mixtures are exclusively found. Detailed NMR spectroscopy of solutions, gels, and solids, aided by model reactions, reveals that the hemiaminal/aminal ratio depends on pH, water content, and cross-linking density. Network formation is fully reversible upon changes in pH, with the resulting moduli from rheology spanning almost 3 orders of magnitude. The self-healing ability of the system is probed by rheology as well, demonstrating maintained material properties of fractured and healed samples. The unusually clean, fast, and reversible chemistry highlights bispiperidones as a class of efficient building blocks with unprecedented possibilities in dynamic covalent chemistry.

Olive-Shaped Organic Cages: Synthesis and Remarkable Promotion of Hydrazone Condensation through Encapsulation in Water

Two organic cages have been prepared in situ in water through the 2 + 3 hydrazone coupling of two pyridinium-derived trialdehydes and oxalohydrazide. The highly water-soluble cages encapsulate and solubilize linear neutral molecules. Such encapsulation has been applied for the promotion of both two- or three-component hydrazone condensation in water. For two-component reactions, the yields of the resulting monohydrazones are increased from 5-10 to 90-96%. For three-component reactions of hydrazinecarbohydrazide with 11 aromatic aldehydes, in the presence of the organic cages, the bihydrazone products can be produced in 88-96% yields. In contrast, without the promotion of the organic cages, 9 of the reactions do not afford the corresponding dihydrazone product.

A combined experimental and molecular dynamics simulation study of an intrinsic self-healing polyurethane elastomer based on a dynamic non-covalent mechanism

An intrinsic self-healing polyurethane (PU) elastomer with excellent self-healing efficiency was prepared. The self-healing properties of this elastomer as well as the temperature dependence of self-healing can be tailored by regulating the molar ratio of hard to soft segments. The self-healing efficiency of 92.5% is the highest when the molar ratio of 4,4-methylenedicyclohexyl diisocyanate (HMDI) to polypropylene carbonate polyol (PPC) is 1.3 and the temperature is 25 °C. In situ temperature swing infrared spectra and low-field nuclear magnetic resonance reveal that the soft segment, PPC, endows PU with a dense dynamic hydrogen bond network, and the dissociation and reconstruction of the hydrogen bond network enable the PU to heal. To date, the exchange of hydrogen bonds has not been observed intuitively through experimental means. Therefore, the number, type, strength, lifetime, and the exchange of hydrogen bonds in the self-healing process at different temperatures were investigated by molecular dynamics (MD) simulation. The simulated results show that the type of hydrogen bond exchange between functional groups will be affected by temperature. The hydrogen bonds between urethane and urea groups play a leading role in the self-healing properties due to the high strength and a large number of hydrogen bonds at both 25 and 50 °C. The stronger strength, longer lifetime, and greater number of effective hydrogen bonds at 25 °C make the self-healing efficiency of PU higher than at 50 °C.

Self-Healing Soft Sensors: From Material Design to Implementation

The demand for interfacing electronics in everyday life is rapidly accelerating, with an ever-growing number of applications in wearable electronics and electronic skins for robotics, prosthetics, and other purposes. Soft sensors that efficiently detect environmental or biological/physiological stimuli have been extensively studied due to their essential role in creating the necessary interfaces for these applications. Unfortunately, due to their natural softness, these sensors are highly sensitive to structural and mechanical damage. The integration of natural properties, such as self-healing, into these systems should improve their reliability, stability, and long-term performance. Recent studies on self-healing soft sensors for varying chemical and physical parameters are herein reviewed. In addition, contemporary studies on material design, device structure, and fabrication methods for sensing platforms are also discussed. Finally, the main challenges and future perspectives in this field are introduced, while focusing on the most promising examples and directions already reported.

Cell-Selective siRNA Delivery Using Glycosylated Dynamic Covalent Polymers Self-Assembled In Situ by RNA Templating

Dynamic covalent libraries enable exploring complex chemical systems from which bioactive assemblies can adaptively emerge through template effects. In this work, we studied dynamic covalent libraries made of complementary bifunctional cationic peptides, yielding a diversity of species from macrocycles to polymers. Although polymers are typically expressed only at high concentration, we found that siRNA acts as a template in the formation of dynamic covalent polymers at low concentration in a process guided by electrostatic binding. Using a glycosylated building block, we were able to show that this templated polymerization further translates into the multivalent presentation of carbohydrate ligands, which subsequently promotes cell uptake and even cell-selective siRNA delivery.

Self-healing solid polymer electrolyte based on imine bonds for high safety and stable lithium metal batteries

Due to their low flammability, good dimensional stability and chemical stability, solid polymer electrolytes are currently attracting extensive interest for building lithium metal batteries. But severe safety issues such as cracks or breakage, resulting in short circuits will prevent their widespread application. Here, we report a new design of self-healing solid polymer electrolyte (ShSPE) based on imine bonds, fabricated from varying amounts of polyoxyethylenebis(amine) and terephthalaldehyde through a simple Schiff base reaction. Moreover, adding diglycidyl ether of bisphenol A improves the flexibility and high stretchability of the polymer electrolyte. The polymer networks exhibit good thermal stability and excellent self-healing characteristics. The ShSPE with the highest NH2-PEG-NH2 content (ShSPE-3) has an improved lithium ion transference number of 0.39, and exhibits an electrochemical stability up to 4.5 V vs. Li/Li+. ShSPE-3 shows the highest ionic conductivity of 1.67 × 10-4 S cm-1 at 60 °C. Besides, the interfacial stability of ShSPE-3 is promoted and the electrolyte membrane exhibits good cycling performance with LiFePO4, and the LiFePO4/Li cell exhibits an initial discharge capacity of 141.3 mA h g -1. These results suggest that self-healing solid polymer electrolytes are promising candidates for high safety and stable lithium metal batteries.

Intrinsic Self-Healing Epoxies in Polymer Matrix Composites (PMCs) for Aerospace Applications

This article reviews some of the intrinsic self-healing epoxy materials that have been investigated throughout the course of the last twenty years. Emphasis is placed on those formulations suitable for the design of high-performance composites to be employed in the aerospace field. A brief introduction is given on the advantages of intrinsic self-healing polymers over extrinsic counterparts and of epoxies over other thermosetting systems. After a general description of the testing procedures adopted for the evaluation of the healing efficiency and the required features for a smooth implementation of such materials in the industry, different self-healing mechanisms, arising from either physical or chemical interactions, are detailed. The presented formulations are critically reviewed, comparing major strengths and weaknesses of their healing mechanisms, underlining the inherent structural polymer properties that may affect the healing phenomena. As many self-healing chemistries already provide the fundamental aspects for recyclability and reprocessability of thermosets, which have been historically thought as a critical issue, perspective trends of a circular economy for self-healing polymers are discussed along with their possible advances and challenges. This may open up the opportunity for a totally reconfigured landscape in composite manufacturing, with the net benefits of overall cost reduction and less waste. Some general drawbacks are also laid out along with some potential countermeasures to overcome or limit their impact. Finally, present and future applications in the aviation and space fields are portrayed.

Self-healing hydrophobic POSS-functionalized fluorinated copolymers via RAFT polymerization and dynamic Diels–Alder reaction

Development of self-healing hydrophobic POSS-functionalized fluorinated copolymethacrylate(s) via RAFT Polymerization and dynamic Diels–Alder Reaction.

Self-healable functional polymers based on Diels–Alder ‘click chemistry’ involving substituted furan and triazolinedione derivatives: a simple and very fast approach

The synthesis of a functional healable polymethacrylate based on dynamic 2,5-disubstituted furan–TAD via DA-“click” conjugation is reported.

Catalyst-free room-temperature self-healing polymer networks based on dynamic covalent quinone methide-secondary amine chemistry

A novel type of dynamic covalent polymer network with a catalyst-free room-temperature self-healing ability was developed on a new dynamic covalent chemistry of aza-Michael addition between para-quinone methide and secondary amine.

Hierarchical self-assembly and controlled disassembly of a cavitand-based host–guest supramolecular polymer

Two hierarchical aggregation modes of cavitand-based supramolecular polymers allow implementing orthogonal disassembly procedures: electrochemical reduction for linear chains and solvent-driven dissolution for bundles.

Dynamic covalent chemistry for architecture changing interpenetrated and single networks

Dynamic single and interpenetrated materials were developed, with post polymerization network exchange enhancing the material properties.

Dynameric Collagen Self-Healing Membranes with High Mechanical Strength for Effective Cell Growth Applications

The fabrication of biocompatible adaptive materials with high stiffness and self-healing properties for medical applications is a challenging endeavor. Collagen is a major extracellular matrix component acting as a substrate for cell adhesion and migration. Dynamers are constitutional polymers whose monomeric components are linked through reversible bonds, able to modify their constitution through reversible exchange of their components. In the current work, we demonstrate that the rational combination of collagen and dynameric networks connected with reversible covalent imine bonds is a very important and previously unreported strategy to provide biocompatible membranes with self-healing ability and excellent mechanical strength. The key challenge in the construction of such membranes is the required adaptive interaction between collagen chains and the dynamic cross-linkers, preventing the formation of defects. For example, by varying structure and molecular lengths of the dynamers, the tensile strength of the dynameric membranes reach over 80 MPa, more than 400 % higher than that observed for the reference collagen membrane, and the highest value for break strain found, was 19 %. The self-healing properties were observed when reconnecting two membrane pieces or even from crushed status of the membranes. Moreover, both MTT assay and confocal laser scanning microscopy method demonstrated the good biocompatibility of the collagen membranes, leaving more than 90 % viability for NIH 3T3 cells after 24 h co-culture.

Hydrogen-Bond Catalysis of Imine Exchange in Dynamic Covalent Systems

The reversibility of imine bonds has been exploited to great effect in the field of dynamic covalent chemistry, with applications such as preparation of functional systems, dynamic materials, molecular machines, and covalent organic frameworks. However, acid catalysis is commonly needed for efficient equilibration of imine mixtures. Herein, it is demonstrated that hydrogen bond donors such as thioureas and squaramides can catalyze the equilibration of dynamic imine systems under unprecedentedly mild conditions. Catalysis occurs in a range of solvents and in the presence of many sensitive additives, showing moderate to good rate accelerations for both imine metathesis and transimination with amines, hydrazines, and hydroxylamines. Furthermore, the catalyst proved simple to immobilize, introducing both reusability and extended control of the equilibration process.

100th Anniversary of Macromolecular Science Viewpoint: Toward Catalytic Chemical Recycling of Waste (and Future) Plastics

The current global materials economy has long been inefficient due to unproductive reuse and recycling efforts. Within the wider materials portfolio, plastics have been revolutionary to many industries but they have been treated as disposable commodities leading to their increasing accumulation in the environment as waste. The field of chemistry has had significant bearing in ushering in the current plastics industry and will undoubtedly have a hand in transforming it to become more sustainable. Existing approaches include the development of synthetic biodegradable plastics and turning to renewable raw materials in order to produce plastics similar to our current petrol-based materials or to create new polymers. Additionally, chemists are confronting the environmental crisis by developing alternative recycling methods to deal with the legacy of plastic waste. Important emergent technologies, such as catalytic chemical recycling or upcycling, have the potential to alleviate numerous issues related to our current and future refuse and, in doing so, help pivot our materials economy from linearity to circularity.

Dual Cross-linking of Epoxidized Linseed Oil with Combined Aliphatic/Aromatic Diacids Containing Dynamic S-S Bonds Generating Recyclable Thermosets

The end-of-life of thermoset materials is a real issue that confronts our society, and the strategy of introducing dynamic reversible bonds can be a sustainable solution to overcome this problem. This study shows an efficient way to produce biobased and recyclable thermosets, for a circular use. To reduce the production costs linked to energy and duration, an improved curing process is proposed by combining aromatic and aliphatic diacid hardeners containing dynamic S-S bonds. The work demonstrates the increased reactivity of epoxidized vegetable oil reacted with the two diacids. The structural evolutions during the exchange reactions that allow the recyclability were followed by Fourier transformed-infrared and nuclear magnetic resonance spectroscopies, high-performance liquid chromatography, and mass spectroscopy. The curing process was studied by differential scanning calorimetry and kinetic study.

Reversible formation of soft coordination polymers from liquid mixtures of photoreactive organometallic ionic liquid and bridging molecules

The reversible switching of bonding modes in coordination polymers through the application of external stimuli leads to versatile mechanical and electronic functions. However, the exploration of such a system remains a great challenge. In this study, we designed liquid mixtures comprising a photoreactive organometallic ionic liquid and a bridging ligand, which form intermolecular coordination bonds upon photoirradiation. The liquid mixture of an ionic liquid [Ru(C5H5){Ph(CH2)3CN}][(SO2F)2N] (1) and a tridentate ligand N(C2H4CN)3 was transformed into an elastomer of an amorphous coordination polymer upon ultraviolet photoirradiation. By contrast, the photoirradiation of the mixture of 1 and a bidentate ligand NC(CH2)4CN produced a highly viscous liquid comprising coordination-bonded oligomers. In these reactions, photoirradiation causes dissociation of the organometallic cation, followed by the formation of intermolecular coordination bonds via the bridging ligands. The photoproducts underwent reverse reactions thermally. Based on coordination transformation, the ionic conductivity and viscoelasticity of these materials were reversibly controlled by the application of light and heat.

NIR-responsive multi-healing HMPAM/dextran/AgNWs hydrogel sensor with recoverable mechanics and conductivity for human-machine interaction

Conductive and self-healing hydrogel sensor is perspective in human-machine interaction applications. However, the design of ideal self-healing hydrogels are always challenging. Herein, by introducing disulfide modified Ag nanowires (AgNWs), we show a novel self-healing hydrogel strain sensor with superior mechanics, conductivity, antibacterial property, and firstly realizing of self-healing with both recovery of mechanics and sensing properties. We demonstrate that the covalent and reversible non-covalent hydrophobic blocks in hydrophobic modified polyacrylamide (HMPAM) achieves the basic self-healing network; dextran with plentiful hydroxyl groups synergistic helps the self-healing by hydrogen bonds; disulfide on the AgNWs surface forms a NIR-responsive and dynamic Ag-S coordination bridge between HMPAM and AgNWs. The resulted hydrogel sensor exhibits comprehensive electromechanical properties, and precisely monitors human motion and subtle electromyography (EMG) signals. Importantly, we firstly achieved the recovery of sensing properties on human motion detection and EMG signal detection after self-healing. This work provides a promising exploration to manufacture bionic strain sensors for potential applications in wearable electronics.