Variants of the cell recognition site of fibronectin that retain attachment-promoting activity

Surfaces that sequester serum-borne heparin amplify growth factor activity

Surfaces presenting a heparin-binding peptide can non-covalently sequester heparin from culture supplements, such as fetal bovine serum. In turn, sequestered, serum-borne heparin can non-covalently localize growth factors at the cell-material interface, resulting in amplified growth factor bioactivity.

α5β1 integrin-mediated adhesion to fibronectin is required for axis elongation and somitogenesis in mice

The arginine-glycine-aspartate (RGD) motif in fibronectin (FN) represents the major binding site for α5β1 and αvβ3 integrins. Mice lacking a functional RGD motif in FN (FN^RGE/RGE) or α5 integrin develop identical phenotypes characterized by embryonic lethality and a severely shortened posterior trunk with kinked neural tubes. Here we show that the FN^RGE/RGE embryos arrest both segmentation and axis elongation. The arrest is evident at about E9.0, corresponding to a stage when gastrulation ceases and the tail bud-derived presomitic mesoderm (PSM) induces α5 integrin expression and assumes axis elongation. At this stage cells of the posterior part of the PSM in wild type embryos are tightly coordinated, express somitic oscillator and cyclic genes required for segmentation, and form a tapered tail bud that extends caudally. In contrast, the posterior PSM cells in FN^RGE/RGE embryos lost their tight associations, formed a blunt tail bud unable to extend the body axis, failed to induce the synchronised expression of Notch1 and cyclic genes and cease the formation of new somites. Mechanistically, the interaction of PSM cells with the RGD motif of FN is required for dynamic formation of lamellipodia allowing motility and cell-cell contact formation, as these processes fail when wild type PSM cells are seeded into a FN matrix derived from FN^RGE/RGE fibroblasts. Thus, α5β1-mediated adhesion to FN in the PSM regulates the dynamics of membrane protrusions and cell-to-cell communication essential for elongation and segmentation of the body axis.

Cilengitide: the first anti-angiogenic small molecule drug candidate design, synthesis and clinical evaluation

Cilengitide, a cyclic RGD pentapeptide, is currently in clinical phase III for treatment of glioblastomas and in phase II for several other tumors. This drug is the first anti-angiogenic small molecule targeting the integrins αvβ3, αvβ5 and αvβ1. It was developed by us in the early 90s by a novel procedure, the spatial screening. This strategy resulted in c(RGDfV), the first superactive αvβ3 inhibitor (100 to 1000 times increased activity over the linear reference peptides), which in addition exhibited high selectivity against the platelet receptor αIIbβ3. This cyclic peptide was later modified by N-methylation of one peptide bond to yield an even greater antagonistic activity in c(RGDf(NMe)V). This peptide was then dubbed Cilengitide and is currently developed as drug by the company Merck-Serono (Germany). This article describes the chemical development of Cilengitide, the biochemical background of its activity and a short review about the present clinical trials. The positive anti-angiogenic effects in cancer treatment can be further increased by combination with "classical" anti-cancer therapies. Several clinical trials in this direction are under investigation.

Dual-ligand modification of PEGylated liposomes shows better cell selectivity and efficient gene delivery

The objective of this study was to develop an efficient dual-ligand based PEGylated liposomal delivery system that had target specificity as well as properties that would enhance cellular uptake. PEGylated liposomes (PEG-LP) were prepared by the lipid film hydration method by adding distearoyl phosphoethanolamine-polyethylene-glycol-2000 conjugate (DSPE-PEG2000) to a lipid mixture. The cyclic RGD (Arg-Gly-Asp) peptide, a specific ligand with affinity for Integrin α(v)β(3) was coupled to the distal end of the PEG on the PEG-LP (RGD-PEG-LP). Stearylated octaarginine (STR-R8) was incorporated on the surface of the RGD-PEG-LP as dual-ligand (R8/RGD-PEG-LP) that functions as a cell penetrating peptide (CPP). RGD-PEG-LP and R8/RGD-PEG-LP were preferentially taken up by caveolae-mediated and clathrin-mediated endocytosis pathways, respectively. Compared to PEG-LP, R8/RGD-PEG-LP showed an enhanced cellular uptake as well as a higher transfection efficiency in Integrin α(v)β(3) expressing cells. However, the amount of cellular uptake or gene expression by the single ligand versions was negligible, even in Integrin α(v)β(3) expressing cells. No remarkable difference in cellular uptake or gene expression was observed for cells in which the expression of targeted receptors was absent. It can be concluded that dual-ligand modified PEG-LP possesses a strong capability for the efficient internalization of PEG-LP and consequently would be an effective tool for the targeted delivery of macromolecules or chemotherapeutics through accelerated cellular uptake.

In vitro requirement for periostin in B lymphopoiesis

B lymphopoiesis arrests in rabbits by 4 months of age. To identify molecules that contribute to this arrest, cDNA-representational difference analysis on BM stromal cells from young and adult rabbits showed that expression of Postn that encodes for the extracellular matrix protein periostin dramatically reduced with age. Postn-small interfering RNA OP9 cells lost their capacity to support B-cell development from rabbit or murine BM cells, and reexpression of periostin restored this potential, indicating an in vitro requirement for periostin in B lymphopoiesis. In our system, we determined that periostin deficiency leads to increased cell death and decreased proliferation of B-lineage progenitors. Further, RGD peptide inhibition of periostin/α(v)β(3) interaction resulted in a marked decrease in B lymphopoiesis in vitro. Microarray analysis of the Postn-small interfering RNA OP9 cells showed decreased expression of key B-lymphopoietic factors, including IL-7 and CXCL12. In vivo, unidentified molecule(s) probably compensate periostin loss because Postn(-/-) mice had normal numbers of B-cell progenitors in BM. We conclude that the decline in periostin expression in adult rabbit BM does not solely explain the arrest of B lymphopoiesis. However, the interaction of periostin with α(v)β(3) on lymphoid progenitors probably provides both proliferative and survival signals for cells in the B-cell development pathway.

Genomic comparison of foot-and-mouth disease virus R strain and its chick-passaged attenuated strain

The present study examined the genomic differences between foot-and-mouth disease virus (FMDV) R strain and its attenuated, chick-passaged (R(304)) strain. Eleven pairs of primers were used to amplify the complete genome of FMDV R and R(304) by RT-PCR. Each fragment was cloned into pMD18-T vector and sequenced. Nucleotide analyses showed that the genome encoding regions of R and R(304) strains open reading frame (ORF) were both 6966 nucleotides (nt) in length, encoding 2322 amino acids. One hundred and ten nucleotides or 32 amino acids were found to be mutated most frequently were in the 3A gene. The next highest rates of mutation were observed in the LP and 1D genes. No mutations were found in either the 2A or 2C genes. The length of 5'IRES region and 3'UTR were 450 nt and 94 nt, respectively. The 5'IRES region and 3'UTR had only 4 nt and 3 nt mutation, respectively after attenuation. The R(304) poly(A) tail length of 18 nt, while that of the R strain was 30 nt. This result demonstrated the primary genomic changes of a FMDV and its attenuated strain, which has important implications in understanding the molecular epidemiology and functional genomics of FMDV.

Chimeric fibronectin matrix mimetic as a functional growth- and migration-promoting adhesive substrate

Therapeutic protein engineering combines genetic, biochemical, and functional information to improve existing proteins or invent new protein technologies. Using these principles, we developed an approach to deliver extracellular matrix (ECM) fibronectin-specific signals to cells. Fibronectin matrix assembly is a cell-dependent process that converts the inactive, soluble form of fibronectin into biologically-active ECM fibrils. ECM fibronectin stimulates cell functions required for normal tissue regeneration, including cell growth, spreading, migration, and collagen reorganization. We have developed recombinant fibronectin fragments that mimic the effects of ECM fibronectin on cell function by coupling the cryptic heparin-binding fragment of fibronectin's first type III repeat (FNIII1H) to the integrin-binding domain (FNIII8-10). GST/III1H,8-10 supports cell adhesion and spreading and stimulates cell proliferation to a greater extent than plasma fibronectin. Deletion and site-specific mutant constructs were generated to identify the active regions in GST/III1H,8-10 and reduce construct size. A chimeric construct in which the integrin-binding, RGDS loop was inserted into the analogous site in FNIII8 (GST/III1H,8(RGD)), supported cell adhesion and migration, and enhanced cell proliferation and collagen gel contraction. GST/III1H,8(RGD) was expressed in bacteria and purified from soluble lysate fractions by affinity chromatography. Fibronectin matrix assembly is normally up-regulated in response to tissue injury. Decreased levels of ECM fibronectin are associated with non-healing wounds. Engineering fibronectin matrix mimetics that bypass the need for cell-dependent fibronectin matrix assembly in chronic wounds is a novel approach to stimulating cellular activities critical for tissue repair.

Engineering the extracellular environment: Strategies for building 2D and 3D cellular structures

Cell fate is regulated by extracellular environmental signals. Receptor specific interaction of the cell with proteins, glycans, soluble factors as well as neighboring cells can steer cells towards proliferation, differentiation, apoptosis or migration. In this review, approaches to build cellular structures by engineering aspects of the extracellular environment are described. These methods include non-specific modifications to control the wettability and stiffness of surfaces using self-assembled monolayers (SAMs) and polyelectrolyte multilayers (PEMs) as well as methods where the temporal activation and spatial distribution of adhesion ligands is controlled. Building on these techniques, construction of two-dimensional cell sheets using temperature sensitive polymers or electrochemical dissolution is described together with current applications of these grafts in the clinical arena. Finally, methods to pattern cells in three-dimensions as well as to functionalize the 3D environment with biologic motifs take us one step closer to being able to engineer multicellular tissues and organs.

Biomimeticity in tissue engineering scaffolds through synthetic peptide modifications-altering chemistry for enhanced biological response

Biomimetic and bioactive biomaterials are desirable as tissue engineering scaffolds by virtue of their capability to mimic natural environments of the extracellular matrix. Biomimeticity has been achieved by the incorporation of synthetic short peptide sequences into suitable materials either by surface modification or by bulk incorporation. Research in this area has identified several novel synthetic peptide segments, some of them with cell-specific interactions, which may serve as potential candidates for use in explicit tissue applications. This review focuses on the developments and prospective directions of incorporating short synthetic peptide sequences onto scaffolds for tissue engineering, with emphasis on the chemistry of peptide immobilization and subsequent cell responses toward modified scaffolds. The article provides a decision-tree-type flow chart indicating the most probable cellular events on a given peptide-modified scaffold along with the consolidated list of synthetic peptide sequences, supports as well as cell types used in various tissue engineering studies, and aims to serve as a quick reference guide to peptide chemists and material scientists interested in the field.

Differentiation of stem cells: strategies for modifying surface biomaterials

Stem cells are a natural choice for cellular therapy because of their potential to differentiate into a variety of lineages, their capacity for self-renewal in the repair of damaged organs and tissues in vivo, and their ability to generate tissue constructs in vitro. Determining how to efficiently drive stem cell differentiation to a lineage of choice is critical for the success of cellular therapeutics. Many factors are involved in this process, the extracellular microenvironment playing a significant role in controlling cellular behavior. In recent years, researchers have focused on identifying a variety of biomaterials to provide a microenvironment that is conducive to stem cell growth and differentiation and that ultimately mimics the in vivo situation. Appropriate biomaterials support the cellular attachment, proliferation, and lineage-specific differentiation of stem cells. Tissue engineering approaches have been used to incorporate growth factors and morphogenetic factors-factors known to induce lineage commitment of stem cells-into cultures with scaffolding materials, including synthetic and naturally derived biomaterials. This review focuses on various strategies that have been used in stem cell expansion and examines modifications of natural and synthetic materials, as well as various culture conditions, for the maintenance and lineage-specific differentiation of embryonic and adult stem cells.

Effects of fibrin-binding oligopeptide on osteopromotion in rabbit calvarial defects

PURPOSE

Fibronectin (FN) has been shown to stimulate bone regeneration in animal models. The aim of this study was to evaluate the capacity of bovine bone mineral coated with synthetic oligopeptides to enhance bone regeneration in rabbit calvarial defects.

METHODS

Oligopeptides including fibrin-binding sequences of FN repeats were synthesized on the basis of primary and tertiary human plasma FN structures. Peptide coated and uncoated bone minerals were implanted into 10 mm calvarial defects in New Zealand white rabbits, and the animals were sacrificed at 4 or 8 weeks after surgery. After specimens were prepared, histologic examination and histomorphometric analysis were performed.

RESULTS

At 4 weeks after surgery, the uncoated groups showed a limited amount of osteoid formation at the periphery of the defect and the oligopeptide coated groups showed more osteoid formation and new bone formation in the center of the defect as well as at the periphery. At 8 weeks, both sites showed increased new bone formation. However, the difference between the two sites had reduced.

CONCLUSIONS

Fibrin-binding synthetic oligopeptide derived from FN on deproteinized bovine bone enhanced new bone formation in rabbit calvarial defects at the early healing stage. This result suggests that these oligopeptides can be beneficial in reconstructing oral and maxillofacial deformities or in regenerating osseous bone defects.

Engineered materials and the cellular microenvironment: a strengthening interface between cell biology and bioengineering

Cells constantly probe and respond to a myriad of cues that are present in their local surroundings. The effects of soluble cues are relatively straightforward to manipulate, yet teasing apart how cells transduce signals from the extracellular matrix and neighboring cells has proven to be challenging due to the spatially and mechanically complex adhesive interactions. Over the years, advances in the engineering of biocompatible materials have enabled innovative ways to study adhesion-mediated cell functions, and numerous insights have elucidated the significance of the cellular microenvironment. Here, we highlight some of the major approaches and discuss the potential for future advancement.

ADAM-15 disintegrin-like domain structure and function

The ADAM (a disintegrin-like and metalloproteinase) proteins are a family of transmembrane cell-surface proteins with important functions in adhesion and proteolytic processing in all animals. Human ADAM-15 is the only member of the ADAM family with the integrin binding motif Arg-Gly-Asp (RGD) in its disintegrin-like domain. This motif is also found in most snake venom disintegrins and other disintegrin-like proteins. This unique RGD motif within ADAM-15 serves as an integrin ligand binding site, through which it plays a pivotal role in interacting with integrin receptors, a large family of heterodimeric transmembrane glycoproteins. This manuscript will present a review of the RGD-containing disintegrin-like domain structures and the structural features responsible for their activity as antagonists of integrin function in relation to the canonical RGD template.

Peptide-mediated targeted drug delivery

Targeted drug delivery to specific group of cells offers an attractive strategy to minimize the undesirable side effects and achieve the therapeutic effect with a lower dose. Both linear and cyclic peptides have been explored as trafficking moiety due to ease of synthesis, structural simplicity, and low probability of undesirable immunogenicity. Peptides derived from sequence of cell surface proteins, such as intercellular adhesion molecule-1 (ICAM-1), LHRH, Bombesin, and LFA-1, have shown potent binding affinity to the target cell surface receptors. Moreover, peptides derived from ICAM-1 receptor can be internalized by the leukemic T-cells along with the conjugated moiety offering the promise to selectively treat cancers and autoimmune diseases. Systematic analyses have revealed that physicochemical properties of the drug-peptide conjugates and their mechanism of receptor-mediated cellular internalization are important controlling factors for developing a successful targeting system. This review is focused on understanding the factors involved in the development of an effective drug-peptide conjugate with an emphasis on the chemistry and biology of the conjugates. Reported results on several promising drug-peptide conjugates have been critically evaluated. The approaches and results presented here will serve as a guide to systematically approach targeted delivery of cytotoxic drug molecules using peptides for treatment of several diseases.

Influence of cell-adhesive peptide ligands on poly(ethylene glycol) hydrogel physical, mechanical and transport properties

Synthetic three-dimensional scaffolds for cell and tissue engineering routinely utilize peptide ligands to provide sites for cell adhesion and to promote cellular activity. Given the fact that recent studies have dedicated great attention to the mechanisms by which cell behavior is influenced by various ligands and scaffold material properties, it is surprising that little work to date has been carried out to investigate the influence of covalently bound ligands on hydrogel material properties. Herein we report the influence of three common ligands utilized in tissue engineering, namely RGD, YIGSR and IKVAV, on the mechanical properties of cross-linked poly(ethylene glycol) (PEG) hydrogels. The effect of the ligands on hydrogel storage modulus, swelling ratio, mesh size and also on the diffusivity of bovine serum albumin through the hydrogel were investigated in detail. We identified conditions under which these ligands strikingly influence the properties of the material. The extent of influence and whether the ligand increases or decreases a specific property is linked to ligand type and concentration. Further, we pinpoint mechanisms by which the ligands interact with the PEG network. This work thus provides specific evidence for interactions between peptide ligands and cross-linked PEG hydrogels that have a significant impact on hydrogel material and transport properties. As a result, this work may have important implications for interpreting cell experiments carried out with ligand-modified hydrogels, because the addition of ligand may affect not only the scaffold's biological properties, but also key physical properties of the system.

RGD motif of lipoprotein T, involved in adhesion of Mycoplasma conjunctivae to lamb synovial tissue cells

Lipoprotein T (LppT), a membrane-located 105-kDa lipoprotein of Mycoplasma conjunctivae, the etiological agent of infectious keratoconjunctivitis (IKC) of domestic sheep and wild Caprinae, was characterized. LppT was shown to promote cell attachment to LSM 192 primary lamb joint synovial cells. Adhesion of M. conjunctivae to LSM 192 cells is inhibited by antibodies directed against LppT. The RGD (Arg-Gly-Asp) motif of LppT was found to be a specific site for binding of M. conjunctivae to these eukaryotic host cells. Recombinant LppT fixed to polymethylmethacrylate slides binds LSM 192 cells, whereas LppT lacking the RGD site is deprived of binding capacity to LSM 192, and LppT containing RGE rather than RGD shows reduced binding. Synthetic nonapeptides derived from LppT containing RGD competitively inhibit binding of LSM 192 cells to LppT-coated slides, whereas nonapeptides containing RAD rather than RGD do not inhibit. RGD-containing, LppT-derived nonapeptides are able to directly inhibit binding of M. conjunctivae to LSM 192 cells by competitive inhibition, whereas the analogous nonapeptide containing RAD rather than RGD or the fibronectin-derived RGD hexapeptide has no inhibitory effect. These results reveal LppT as the first candidate of a RGD lectin in Mycoplasma species that is assumed to bind to beta integrins.

Controlled spatial and conformational display of immobilised bone morphogenetic protein-2 and osteopontin signalling motifs regulates osteoblast adhesion and differentiation in vitro

Background

The interfacial molecular mechanisms that regulate mammalian cell growth and differentiation have important implications for biotechnology (production of cells and cell products) and medicine (tissue engineering, prosthetic implants, cancer and developmental biology). We demonstrate here that engineered protein motifs can be robustly displayed to mammalian cells in vitro in a highly controlled manner using a soluble protein scaffold designed to self assemble on a gold surface.

Results

A protein was engineered to contain a C-terminal cysteine that would allow chemisorption to gold, followed by 12 amino acids that form a water soluble coil that could switch to a hydrophobic helix in the presence of alkane thiols. Bioactive motifs from either bone morphogenetic protein-2 or osteopontin were added to this scaffold protein and when assembled on a gold surface assessed for their ability to influence cell function. Data demonstrate that osteoblast adhesion and short-term responsiveness to bone morphogenetic protein-2 is dependent on the surface density of a cell adhesive motif derived from osteopontin. Furthermore an immobilised cell interaction motif from bone morphogenetic protein supported bone formation in vitro over 28 days (in the complete absence of other osteogenic supplements). In addition, two-dimensional patterning of this ligand using a soft lithography approach resulted in the spatial control of osteogenesis.

Conclusion

These data describe an approach that allows the influence of immobilised protein ligands on cell behaviour to be dissected at the molecular level. This approach presents a durable surface that allows both short (hours or days) and long term (weeks) effects on cell activity to be assessed. This widely applicable approach can provide mechanistic insight into the contribution of immobilised ligands in the control of cell activity.

Targeted in vivo extracellular matrix formation promotes neovascularization in a rodent model of myocardial infarction

Background

The extracellular matrix plays an important role in tissue regeneration. We investigated whether extracellular matrix protein fragments could be targeted with antibodies to ischemically injured myocardium to promote angiogenesis and myocardial repair.

Methodology/Principal Findings

Four peptides, 2 derived from fibronectin and 2 derived from Type IV Collagen, were assessed for in vitro and in vivo tendencies for angiogenesis. Three of the four peptides—Hep I, Hep III, RGD—were identified and shown to increase endothelial cell attachment, proliferation, migration and cell activation in vitro. By chemically conjugating these peptides to an anti-myosin heavy chain antibody, the peptides could be administered intravenously and specifically targeted to the site of the myocardial infarction. When administered into Sprague-Dawley rats that underwent ischemia-reperfusion myocardial infarction, these peptides produced statistically significantly higher levels of angiogenesis and arteriogenesis 6 weeks post treatment.

Conclusions/Significance

We demonstrated that antibody-targeted ECM-derived peptides alone can be used to sufficiently alter the extracellular matrix microenvironment to induce a dramatic angiogenic response in the myocardial infarct area. Our results indicate a potentially new non-invasive strategy for repairing damaged tissue, as well as a novel tool for investigating in vivo cell biology.

A fast, reproducible and low-cost method for sequence deconvolution of 'on-bead' peptides via 'on-target' maldi-TOF/TOF mass spectrometry

A novel approach to high-throughput sequence deconvolution of on-bead small peptides (MW < 2000 Da) using on-target MALDI-TOF/TOF instrumentation is presented. Short peptides of pentamer and octamer length, covalently attached to TentaGel polystyrene beads through a photolabile linker, were placed onto the MALDI target, apportioned with suitable matrix (2,5-dihydroxybenzoic acid) and then hit with the instrument laser (Nd : YAG, 355 nm). This induced easy and highly reproducible photochemical cleavage, desorption (MS mode) and fragmentation (MS/MS mode). Peptide fragments were identified with a mass accuracy of 0.1 Da of the expected values. This technique significantly accelerates the sequence determination of positive peptide hits obtained from random combinatorial libraries when screening against biological targets, paving the way for a rapid and efficient method to identify molecular imaging ligands specific to pathological targets in cancer and other diseases.

Disease-associated extracellular matrix suppresses osteoblastic differentiation of human periodontal ligament cells via MMP-1

Fibronectin (FN) fragments found in chronic inflammatory diseases, including periodontal disease and arthritis, may contribute to tissue destruction in part via induction of matrix metalloproteinases (MMPs). We previously showed that the 120-kDa FN fragment containing the central cell binding domain (120FN) dose dependently induces MMP-1 (collagenase-1) in human periodontal ligament (PDL) cells, whereas intact FN did not elicit this response. Recently, we found that an increase in MMP-1 expression is accompanied by a decreased osteoblastic phenotype in PDL cells. We hypothesized that 120FN inhibits osteoblastic differentiation of PDL cells by inducing MMP-1. Effects of increasing concentrations of 120FN on MMP-1 expression and on osteoblastic markers were assessed in cultured PDL cells using Western blotting, qRT-PCR, and collagen degradation and alkaline phosphatase (AP) activity assays. The 120FN dose dependently increased MMP-1 expression and activity, concomitant with a decrease in AP activity. The increase in collagenase activity was largely attributed to increased MMP-1 expression. Concurrent with the decrease in AP activity, the 120FN reduced baseline and dexamethasone-induced gene expression of specific osteoblastic markers, Runx2 and osteonectin, and diminished mineralized nodule formation. Finally, siRNA inhibition of 120FN-induced MMP-1 reduced collagenase expression and rescued the AP phenotype to baseline levels. These findings suggest that disease-associated 120FN, in addition to having direct effects on tissue destruction by upregulating MMPs, could contribute to disease progression by impeding osteoblastic differentiation of osteogenic PDL cells and, consequently, diminish bone regeneration.

Self-assembly of peptide amphiphiles: from molecules to nanostructures to biomaterials

Peptide amphiphiles are a class of molecules that combine the structural features of amphiphilic surfactants with the functions of bioactive peptides and are known to assemble into a variety of nanostructures. A specific type of peptide amphiphiles are known to self-assemble into one-dimensional nanostructures under physiological conditions, predominantly nanofibers with a cylindrical geometry. The resultant nanostructures could be highly bioactive and are of great interest in many biomedical applications, including tissue engineering, regenerative medicine, and drug delivery. In this context, we highlight our strategies for using molecular self-assembly as a toolbox to produce peptide amphiphile nanostructures and materials and efforts to translate this technology into applications as therapeutics. We also review our recent progress in using these materials for treating spinal cord injury, inducing angiogenesis, and for hard tissue regeneration and replacement.

Development of bioactive peptide amphiphiles for therapeutic cell delivery

There is great clinical interest in cell-based therapies for ischemic tissue repair in cardiovascular disease. However, the regenerative potential of these therapies is limited due to poor cell viability and minimal retention following application. We report here the development of bioactive peptide amphiphile nanofibers displaying the fibronectin-derived RGDS cell adhesion epitope as a scaffold for therapeutic delivery of bone marrow derived stem and progenitor cells. When grown on flat substrates, a binary peptide amphiphile system consisting of 10 wt.% RGDS-containing molecules and 90wt.% negatively charged diluent molecules was found to promote optimal cell adhesion. This binary system enhanced adhesion 1.4-fold relative to substrates composed of only the non-bioactive diluent. Additionally, no enhancement was found upon scrambling the epitope and adhesion was no longer enhanced upon adding soluble RGDS to the cell media, indicating RGDS-specific adhesion. When encapsulated within self-assembled scaffolds of the binary RGDS nanofibers in vitro, cells were found to be viable and proliferative, increasing in number by 5.5 times after only 5 days, an effect again lost upon adding soluble RGDS. Cells encapsulated within a non-bioactive scaffold and those within a binary scaffold with scrambled epitope showed minimal viability and no proliferation. Cells encapsulated within this RGDS nanofiber gel also increase in endothelial character, evident by a decrease in the expression of CD34 paired with an increase in the expression of endothelial-specific markers VE-Cadherin, VEGFR2 and eNOS after 5 days. In an in vivo study, nanofibers and luciferase-expressing cells were co-injected subcutaneously in a mouse model. The binary RGDS material supported these cells in vivo, evident by a 3.2-fold increase in bioluminescent signal attributable to viable cells; this suggests the material has an anti-apoptotic and/or proliferative effect on the transplanted bone marrow cells. We conclude that the binary RGDS-presenting nanofibers developed here demonstrate enhanced viability, proliferation and adhesion of associated bone marrow derived stem and progenitor cells. This study suggests potential for this material as a scaffold to overcome current limitations of stem cell therapies for ischemic diseases.

Design and development of polymer conjugates as anti-angiogenic agents

Angiogenesis, the formation of new blood vessels from pre-existing vasculature, is one of the central key steps in tumor progression and metastasis. Consequently, it became an important target in cancer therapy, making novel angiogenesis inhibitors a new modality of anticancer agents. Although relative to conventional chemotherapy, anti-angiogenic agents display a safer toxicity profile, the vast majority of these agents are low-molecular-weight compounds exhibiting poor pharmacokinetic profile with short half-life in the bloodstream and high overall clearance rate. The "Polymer Therapeutics" field has significantly improved the therapeutic potential of low-molecular-weight drugs and proteins for cancer treatment. Drugs can be conjugated to polymeric carriers that can be either directly conjugated to targeting proteins or peptides or derivatized with adapters conjugated to a targeting moiety. This approach holds a significant promise for the development of new targeted anti-angiogenic therapies as well as for the optimization of existing anti-angiogenic drugs or polypeptides. Here we overview the innovative approach of targeting tumor angiogenesis using polymer therapeutics.

Extracellular and intracellular mechanisms that mediate the metastatic activity of exogenous osteopontin

BACKGROUND

Osteopontin affects several steps of the metastatic cascade. Despite direct correlation with metastasis in experimental systems and in patient studies, the extracellular and intracellular basis for these observations remains unsolved. In this study, the authors used human melanoma and sarcoma cell lines to evaluate the effects of soluble osteopontin on metastasis.

METHODS

Exogenous osteopontin or negative controls, including a site-directed mutant osteopontin, were used in functional assays in vitro, ex vivo, and in vivo that were designed to test the extracellular and intracellular mechanisms involved in experimental metastasis.

RESULTS

In the extracellular environment, the results confirmed that soluble osteopontin is required for its prometastatic effects; this phenomenon is specific, arginine-glycine-aspartic acid (RGD)-dependent, and evident in experimental models of metastasis. In the intracellular environment, osteopontin initially induced rapid tyrosine 418 (Tyr-418) dephosphorylation of the cellular homolog of the Rous sarcoma virus (c-Src), with decreases in actin stress fibers and increased binding to the vascular endothelium. This heretofore undescribed Tyr dephosphorylation was followed by a tandem c-Src phosphorylation after tumor cell attachment to the metastatic site.

CONCLUSIONS

The results of this study revealed a complex molecular interaction as well as a dual role for osteopontin in metastasis that depends on whether tumor cells are in circulation or attached. Such context-dependent functional insights may contribute to antimetastasis strategies.

Comparison of new bone formation, implant integration, and biocompatibility between RGD-hydroxyapatite and pure hydroxyapatite coating for cementless joint prostheses--an experimental study in rabbits

This is the first work to report on additional Arginin-Glycin-Aspartat (RGD) coating on precoated hydroxyapatite (HA) surfaces regarding new bone formation, implant bone contact, and biocompatibility compared to pure HA coating and uncoated stainless K-wires. There were 39 rabbits in total with 6 animals for the RGD-HA and HA group for the 4 week time period and 9 animals for each of the 3 implant groups for the 12 week observation. A 2.0 K-wire either with RGD-HA or with pure HA coating or uncoated was placed into the intramedullary canal of the tibia. After 4 and 12 weeks, the tibiae were harvested and three different areas of the tibia were assessed for quantitative and qualitative histology for new bone formation, direct implant bone contact, and formation of multinucleated giant cells. Both RGD-HA and pure HA coating showed statistically higher new bone formation and implant bone contact after 12 weeks than the uncoated K-wire. There were no significant differences between the RGD-HA and the pure HA coating in new bone formation and direct implant bone contact after 4 and 12 weeks. The number of multinucleated giant did not differ significantly between the RGD-HA and HA group after both time points. Overall, no significant effects of an additional RGD coating on HA surfaces were detected in this model after 12 weeks.

Natural-host animal models indicate functional interchangeability between the filamentous haemagglutinins of Bordetella pertussis and Bordetella bronchiseptica and reveal a role for the mature C-terminal domain, but not the RGD motif, during infection

Bacteria of the Bordetella genus cause respiratory tract infections. Both broad host range (e.g. Bordetella bronchiseptica) and human-adapted (e.g. Bordetella pertussis) strains produce a surface-exposed and secreted protein called filamentous haemagglutinin (FHA) that functions in adherence and immunomodulation. Previous studies using B. pertussis and cultured mammalian cells identified several FHA domains with potential roles in host cell interactions, including an Arg-Gly-Asp (RGD) triplet that was reported to bind integrins on epithelial cells and monocytes to activate host signalling pathways. We show here that, in contrast to our previous report, the fhaB genes of B. pertussis and B. bronchiseptica are functionally interchangeable, at least with regard to the various in vitro and in vivo assays investigated. This result is significant because it indicates that information obtained studying FHA using B. bronchiseptica and natural-host animal models should apply to B. pertussis FHA as well. We also show that the C-terminus of mature FHA, which we name the MCD, mediates adherence to epithelial and macrophage-like cells and is required for colonization of the rat respiratory tract and modulation of the inflammatory response in mouse lungs. We could not, however, detect a role for the RGD in any of these processes.

Cyclic arginine-glycine-aspartate peptides enhance three-dimensional stem cell osteogenic differentiation

The role of morphogens in bone regeneration has been widely studied, whereas the effect of matrix cues, particularly on stem cell differentiation, are less well understood. In this work, we investigated the effects of arginine-glycine-aspartate (RGD) ligand conformation (linear vs cyclic RGD) on primary human bone marrow stromal cell (hBMSC) and D1 stem cell osteogenic differentiation in three-dimensional (3D) culture and compared their response with that of committed MC3T3-E1 preosteoblasts to determine whether the stage of cell differentiation altered the response to the adhesion ligands. Linear RGD densities that promoted osteogenic differentiation of committed cells (MC3T3-E1 preosteoblasts) did not induce differentiation of hBMSCs or D1 stem cells, although matrices presenting the cyclic form of this adhesion ligand enhanced osteoprogenitor differentiation in 3D culture. This may be due to enhanced integrin-ligand binding. These studies indicate that biomaterial design parameters optimized for differentiated cell types may not directly translate to stem cell populations, because less-committed cells may require more instruction than differentiated cells. It is likely that design of synthetic extracellular matrices tailored to promote stem cell differentiation may enhance bone regeneration by transplanted cells.

Fibronectin in aging extracellular matrix fibrils is progressively unfolded by cells and elicits an enhanced rigidity response

While the mechanical properties of a substrate or engineered scaffold can govern numerous aspects of cell behavior, cells quickly start to assemble their own matrix and will ultimately respond to their self-made extracellular matrix (ECM) microenvironments. Using fluorescence resonance energy transfer (FRET), we detected major changes in the conformation of a constituent ECM protein, fibronectin (Fn), as cells fabricated a thick three-dimensional (3D) matrix over the course of three days. These data provide the first evidence that matrix maturation occurs and that aging is associated with increased stretching of fibronectin fibrils, which leads to at least partial unfolding of the secondary structure of individual protein modules. A comparison of the conformations of Fn in these 3D matrices with those constructed by cells on rigid and flexible polyacrylamide surfaces suggests that cells in maturing matrices experience a microenviroment of gradually increasing rigidity. In addition, further matrix stiffening is caused by active Fn fiber alignment parallel to the contractile axis of the elongated fibroblasts, a cell-driven effect previously described for other fibrillar matrices. The fibroblasts, therefore, not only cause matrix unfolding, but reciprocally respond to the altered Fn matrix properties by up-regulating their own rigidity response. Consequently, our data demonstrate for the first time that a matured and aged matrix has distinctly different physical and biochemical properties compared to a newly assembled matrix. This might allow cells to specifically recognise the age of a matrix.

Silk fibroin protein from mulberry and non-mulberry silkworms: cytotoxicity, biocompatibility and kinetics of L929 murine fibroblast adhesion

Silks fibers and films fabricated from fibroin protein of domesticated mulberry silkworm cocoon have been traditionally utilized as sutures in surgery and recently as biomaterial films respectively. Here, we explore the possibility of application of silk fibroin protein from non-mulberry silkworm cocoon as a potential biomaterial aid. In terms of direct inflammatory potential, fibroin proteins from Antheraea mylitta and Bombyx mori are immunologically inert and invoke minimal immune response. Stimulation of murine peritoneal macrophages and RAW 264.7 murine macrophages by these fibroin proteins both in solution and in the form of films assayed in terms of nitric oxide and TNFalpha production showed comparable stimulation as in collagen. Kinetics of adhesion of L929 murine fibroblasts, for biocompatibility evaluation, monitored every 4 h from seeding and studied over a period of 24 h, reveal A. mylitta fibroin film to be a better substrate in terms of rapid and easier cellularization. Cell viability studies by MTT assay and flow cytometric analyses indicate the ability of fibroin matrices to support cell growth and proliferation comparable to collagen for long-term culture. This matrix may have potential to serve in those injuries where rapid cellularization is essential.

Moving known libraries to an addressable array: a site-selective hetero-Michael reaction

A two-step, Michael reaction-based strategy for site-selectively placing molecules by unique electrodes in an addressable microelectrode array has been developed. The strategy is compatible with the use of polypeptide nucleophiles and works with microelectrode arrays having either 1024 electrodes/cm (2) or 12,544 electrodes/cm (2). The chemistry should allow for the transfer of existing molecular libraries to microelectrode array devices for analysis.

The role of integrin binding sites in fibronectin matrix assembly in vivo

The extracellular matrix (ECM) glycoprotein fibronectin (FN) requires the help of cells to assemble into a functional fibrillar matrix, which then orchestrates the assembly of other ECM proteins and promotes cell adhesion, migration and signalling. Fibrillogenesis is initiated and governed by cell surface integrins that bind to specific sites in the FN molecule. Recent studies identified novel integrin binding sites in FN that can also participate in FN fibril formation and in morphogenetic events during development.