A thymidine triphosphate shape analog lacking Watson-Crick pairing ability is replicated with high sequence selectivity

Solution structure of a DNA duplex containing a biphenyl pair

Hydrogen-bonding and stacking interactions between nucleobases are considered to be the major noncovalent interactions that stabilize the DNA and RNA double helices. In recent work we found that one or multiple biphenyl pairs, devoid of any potential for hydrogen bond formation, can be introduced into a DNA double helix without loss of duplex stability. We hypothesized that interstrand stacking interactions of the biphenyl residues maintain duplex stability. Here we present an NMR structure of the decamer duplex d(GTGACXGCAG) d(CTGCYGTCAC) that contains one such X/Y biaryl pair. X represents a 3'',5''-dinitrobiphenyl- and Y a 3'',4''-dimethoxybiphenyl C-nucleoside unit. The experimentally determined solution structure shows a B-DNA duplex with a slight kink at the site of modification. The biphenyl groups are intercalated side by side as a pair between the natural base pairs and are stacked head to tail in van der Waals contact with each other. The first phenyl rings of the biphenyl units each show tight intrastrand stacking to their natural base neighbors on the 3'-side, thus strongly favoring one of two possible interstrand intercalation structures. In order to accommodate the biphenyl units in the duplex the helical pitch is widened while the helical twist at the site of modification is reduced. Interestingly, the biphenyl rings are not static in the duplex but are in dynamic motion even at 294 K.

Fluorescence of size-expanded DNA bases: reporting on DNA sequence and structure with an unnatural genetic set

We recently described the synthesis and helix assembly properties of expanded DNA (xDNA), which contains base pairs 2.4 A larger than natural DNA pairs. This designed genetic set is under study with the goals of mimicking the functions of the natural DNA-based genetic system and of developing useful research tools. Here, we study the fluorescence properties of the four expanded bases of xDNA (xA, xC, xG, xT) and evaluate how their emission varies with changes in oligomer length, composition, and hybridization. Experiments were carried out with short oligomers of xDNA nucleosides conjugated to a DNA oligonucleotide, and we investigated the effects of hybridizing these fluorescent oligomers to short complementary DNAs with varied bases opposite the xDNA bases. As monomer nucleosides, the xDNA bases absorb light in two bands: one at approximately 260 nm (similar to DNA) and one at longer wavelength ( approximately 330 nm). All are efficient violet-blue fluorophores with emission maxima at approximately 380-410 nm and quantum yields (Phifl) of 0.30-0.52. Short homo-oligomers of the xDNA bases (length 1-4 monomers) showed moderate self-quenching except xC, which showed enhancement of Phifl with increasing length. Interestingly, multimers of xA emitted at longer wavelengths (520 nm) as an apparent excimer. Hybridization of an oligonucleotide to the DNA adjacent to the xDNA bases (with the xDNA portion overhanging) resulted in no change in fluorescence. However, addition of one, two, or more DNA bases in these duplexes opposite the xDNA portion resulted in a number of significant fluorescence responses, including wavelength shifts, enhancements, or quenching. The strongest responses were the enhancement of (xG)n emission by hybridization of one or more adenines opposite them, and the quenching of (xT)n and (xC)n emission by guanines opposite. The data suggest multiple ways in which the xDNA bases, both alone and in oligomers, may be useful as tools in biophysical analysis and biotechnological applications.

Polymerase recognition and stability of fluoro-substituted pyridone nucleobase analogues

Recently much effort has been focused on designing unnatural base pairs that are stable and replicated by DNA polymerases with high efficiency and fidelity. This work has helped to identify a variety of nucleobase properties that are capable of mediating the required interbase interactions in the absence of Watson-Crick hydrogen-bonding complementarity. These properties include shape complementarity, the presence of a suitably positioned hydrogen-bond donor in the developing minor groove, and fluorine substitution. In order to help characterize how each factor contributes to base pairing stability and replication, we synthesized and characterized three fluoro-substituted pyridone nucleoside analogues, 3 FP, 4 FP, and 5 FP. Generally, we found that the specific fluorine substitution pattern of the analogues had little impact on unnatural pair or mispair stability, with the exception of mispairs with dG, which were also the most stable. The mispair between dG and 3 FP was less stable than that with 4 FP or 5 FP, which likely resulted from specific interbase interactions. While fluorine substitution had little impact on the synthesis of the unnatural base pairs, it significantly enhanced mispairing with dG. Remarkably, the mispair between dG and 3 FP was the most efficiently synthesized, due to a favorable entropy of activation, which possibly resulted from the displacement of water molecules from dG in the phosphoryl transfer transition state. The more efficient synthesis of the 3 FP-dG mispair, despite its being the least stable of the three, suggests that the determinants of synthesis and stability are distinct. Finally, we found that fluorine substitution significantly increased the rate at which the pyridone-based unnatural base pairs were extended; this suggests that both minor groove hydrogen-bond acceptors and fluorine substituents could be used to simultaneously optimize unnatural base pairs.

Synthesis, DNA polymerase incorporation, and enzymatic phosphate hydrolysis of formamidopyrimidine nucleoside triphosphates

The nucleoside triphosphates of N6-(2-deoxy-alpha,beta-d-erythro-pentofuranosyl)-2,6-diamino-4-hydroxy-5-formamidopyrimidine (Fapy.dGTP) and its C-nucleoside analogue (beta-C-Fapy.dGTP) were synthesized. The lability of the formamide group required that nucleoside triphosphate formation be carried out using an umpolung strategy in which pyrophosphate was activated toward nucleophilic attack. The Klenow fragment of DNA polymerase I from Escherichia coli accepted Fapy.dGTP and beta-C-Fapy.dGTP as substrates much less efficiently than it did dGTP. Subsequent extension of a primer containing either modified nucleotide was less affected compared to when the native nucleotide is present at the 3'-terminus. The specificity constants are sufficiently large that nucleoside triphosphate incorporation could account for the level of Fapy.dG observed in cells if 1% of the dGTP pool is converted to Fapy.dGTP. Similarly, polymerase-mediated introduction of beta-C-Fapy.dG could be useful for incorporating useful amounts of this nonhydrolyzable analogue for use as an inhibitor of base excision repair. The kinetic viability of these processes is enhanced by inefficient hydrolysis of Fapy.dGTP and beta-C-Fapy.dGTP by MutT, the E. coli enzyme that releases pyrophosphate and the corresponding nucleoside monophosphate upon reaction with structurally related nucleoside triphosphates.

Structure and activity of Y-class DNA polymerase DPO4 from Sulfolobus solfataricus with templates containing the hydrophobic thymine analog 2,4-difluorotoluene

The 2,4-difluorotoluene (DFT) analog of thymine has been used extensively to probe the relative importance of shape and hydrogen bonding for correct nucleotide insertion by DNA polymerases. As far as high fidelity (A-class) polymerases are concerned, shape is considered by some as key to incorporation of A(T) opposite T(A) and G(C) opposite C(G). We have carried out a detailed kinetic analysis of in vitro primer extension opposite DFT-containing templates by the trans-lesion (Y-class) DNA polymerase Dpo4 from Sulfolobus solfataricus. Although full-length product formation was observed, steady-state kinetic data show that dATP insertion opposite DFT is greatly inhibited relative to insertion opposite T (approximately 5,000-fold). No products were observed in the pre-steady-state. Furthermore, it is noteworthy that Dpo4 strongly prefers dATP opposite DFT over dGTP (approximately 200-fold) and that the polymerase is able to extend an A:DFT but not a G:DFT pair. We present crystal structures of Dpo4 in complex with DNA duplexes containing the DFT analog, the first for any DNA polymerase. In the structures, template-DFT is either positioned opposite primer-A or -G at the -1 site or is unopposed by a primer base and followed by a dGTP:A mismatch pair at the active site, representative of a -1 frameshift. The three structures provide insight into the discrimination by Dpo4 between dATP and dGTP opposite DFT and its inability to extend beyond a G:DFT pair. Although hydrogen bonding is clearly important for error-free replication by this Y-class DNA polymerase, our work demonstrates that Dpo4 also relies on shape and electrostatics to distinguish between correct and incorrect incoming nucleotide.

Crystal structure, stability and in vitro RNAi activity of oligoribonucleotides containing the ribo-difluorotoluyl nucleotide: insights into substrate requirements by the human RISC Ago2 enzyme

Short interfering RNA (siRNA) duplexes are currently being evaluated as antisense agents for gene silencing. Chemical modification of siRNAs is widely expected to be required for therapeutic applications in order to improve delivery, biostability and pharmacokinetic properties. Beyond potential improvements in the efficacy of oligoribonucleotides, chemical modification may also provide insight into the mechanism of mRNA downregulation mediated by the RNA–protein effector complexes (RNA-induced silencing complex or RISC). We have studied the in vitro activity in HeLa cells of siRNA duplexes against firefly luciferase with substitutions in the guide strand of U for the apolar ribo-2,4-difluorotoluyl nucleotide (rF) [Xia, J. et al. (2006) ACS Chem. Biol., 1, 176–183] as well as of C for rF. Whereas an internal rF:A pair adjacent to the Ago2 (‘slicer’ enzyme) cleavage site did not affect silencing relative to the native siRNA duplex, the rF:G pair and other mismatches such as A:G or A:A were not tolerated. The crystal structure at atomic resolution determined for an RNA dodecamer duplex with rF opposite G manifests only minor deviations between the geometries of rF:G and the native U:G wobble pair. This is in contrast to the previously found, significant deviations between the geometries of rF:A and U:A pairs. Comparison between the structures of the RNA duplex containing rF:G and a new structure of an RNA with A:G mismatches with the structures of standard Watson–Crick pairs in canonical duplex RNA leads to the conclusion that local widening of the duplex formed by the siRNA guide strand and the targeted region of mRNA is the most likely reason for the intolerance of human Ago2 (hAgo2), the RISC endonuclease, toward internal mismatch pairs involving native or chemically modified RNA. Contrary to the influence of shape, the thermodynamic stabilities of siRNA duplexes with single rF:A, A:A, G:A or C:A (instead of U:A) or rF:G pairs (instead of C:G) show no obvious correlation with their activities. However, incorporation of three rF:A pairs into an siRNA duplex leads to loss of activity. Our structural and stability data also shed light on the role of organic fluorine as a hydrogen bond acceptor. Accordingly, UV melting (T_M) data, osmotic stress measurements, X-ray crystallography at atomic resolution and the results of semi-empirical calculations are all consistent with the existence of weak hydrogen bonds between fluorine and the H-N1(G) amino group in rF:G pairs of the investigated RNA dodecamers.

Efforts toward expansion of the genetic alphabet: structure and replication of unnatural base pairs

Expansion of the genetic alphabet has been a long-time goal of chemical biology. A third DNA base pair that is stable and replicable would have a great number of practical applications and would also lay the foundation for a semisynthetic organism. We have reported that DNA base pairs formed between deoxyribonucleotides with large aromatic, predominantly hydrophobic nucleobase analogues, such as propynylisocarbostyril (dPICS), are stable and efficiently synthesized by DNA polymerases. However, once incorporated into the primer, these analogues inhibit continued primer elongation. More recently, we have found that DNA base pairs formed between nucleobase analogues that have minimal aromatic surface area in addition to little or no hydrogen-bonding potential, such as 3-fluorobenzene (d3FB), are synthesized and extended by DNA polymerases with greatly increased efficiency. Here we show that the rate of synthesis and extension of the self-pair formed between two d3FB analogues is sufficient for in vitro DNA replication. To better understand the origins of efficient replication, we examined the structure of DNA duplexes containing either the d3FB or dPICS self-pairs. We find that the large aromatic rings of dPICS pair in an intercalative manner within duplex DNA, while the d3FB nucleobases interact in an edge-on manner, much closer in structure to natural base pairs. We also synthesized duplexes containing the 5-methyl-substituted derivatives of d3FB (d5Me3FB) paired opposite d3FB or the unsubstituted analogue (dBEN). In all, the data suggest that the structure, electrostatics, and dynamics can all contribute to the extension of unnatural primer termini. The results also help explain the replication properties of many previously examined unnatural base pairs and should help design unnatural base pairs that are better replicated.

DNA polymerase proofreading: active site switching catalyzed by the bacteriophage T4 DNA polymerase

DNA polymerases achieve high-fidelity DNA replication in part by checking the accuracy of each nucleotide that is incorporated and, if a mistake is made, the incorrect nucleotide is removed before further primer extension takes place. In order to proofread, the primer-end must be separated from the template strand and transferred from the polymerase to the exonuclease active center where the excision reaction takes place; then the trimmed primer-end is returned to the polymerase active center. Thus, proofreading requires polymerase-to-exonuclease and exonuclease-to-polymerase active site switching. We have used a fluorescence assay that uses differences in the fluorescence intensity of 2-aminopurine (2AP) to measure the rates of active site switching for the bacteriophage T4 DNA polymerase. There are three findings: (i) the rate of return of the trimmed primer-end from the exonuclease to the polymerase active center is rapid, >500 s⁻¹; (ii) T4 DNA polymerase can remove two incorrect nucleotides under single turnover conditions, which includes presumed exonuclease-to-polymerase and polymerase-to-exonuclease active site switching steps and (iii) proofreading reactions that initiate in the polymerase active center are not intrinsically processive.

Importance of hydrogen bonding for efficiency and specificity of the human mitochondrial DNA polymerase

To assess the contribution to discrimination afforded by base pair hydrogen bonding during DNA replication by the human mitochondrial DNA polymerase, we examined nucleoside mimics lacking hydrogen bond forming capability but retaining the overall steric shape of the natural nucleotide. We employed oligonucleotide templates containing either a deoxyadenosine shape mimic (dQ) or a deoxythymidine shape mimic (dF). Additionally, the nucleoside triphosphate analogs difluorotoluene deoxynucleoside triphosphate, 9-methyl-1-H-imidazo[(4,5)-b]pyridine deoxyribose triphosphate, and 4-methylbenzimidazole deoxyribose triphosphate (dZTP; another dATP shape mimic) were assayed. We used pre-steady state methods to determine the kinetic parameters governing nucleotide incorporation, k(pol) and K(d). In general, the loss of hydrogen bonding potential led to 2-3 kcal/mol reduction in ground state binding free energy, whereas effects on the maximum rate of polymerization were quite variable, ranging from negligible (dATP:dF) to nearly 4 kcal/mol (dZTP:dT). Although we observed only a 46-fold reduction in discrimination when dF was present in the template, there was a complete elimination of discrimination when dQ was present in the template. Our data with dF indicate that hydrogen bonding contributes 2.2 kcal/mol toward the efficiency of incorporation, whereas data with dQ (which may overestimate the effect due to poor steric mimicry) suggest a contribution of up to 6.8 kcal/mol. Taken together, the data suggest that sterics are necessary but not sufficient to achieve optimal efficiency and fidelity for DNA polymerase. Base pair hydrogen bonding contributes at least a third of the energy underlying nucleoside incorporation efficiency and specificity.

Base pair hydrogen bonds are essential for proofreading selectivity by the human mitochondrial DNA polymerase

We have characterized the role of Watson-Crick hydrogen bonding in the 3'-terminal base pair on the 3'-5' exonuclease activity of the human mitochondrial DNA polymerase. Nonpolar nucleoside analogs of thymidine (dF) and deoxyadenosine (dQ) were used to eliminate hydrogen bonds while maintaining base pair size and shape. Exonuclease reactions were examined using pre-steady state kinetic methods. The time dependence of removal of natural nucleotides from the primer terminus paired opposite the nonpolar analogs dF and dQ were best fit to a double exponential function. The double exponential kinetics as well as the rates of excision (3-6 s(-1) fast phase, 0.16-0.3 s(-1) slow phase) are comparable with those observed during mismatch removal of natural nucleotides even when the analog was involved in a sterically correct base pair. Additionally, incorporation of the next correct base beyond a nonpolar analog was slow (0.04-0.22 s(-1)), so that more than 95% of terminal base pairs were removed rather than extended. The polymerase responds to all 3'-terminal base pairs containing a nonpolar analog as if it were a mismatch regardless of the identity of the paired base, and kinetic partitioning between polymerase and exonuclease sites failed to discriminate between correct and incorrect base pairs. Thus, sterics alone are insufficient, whereas hydrogen bond formation is essential for proper proofreading selectivity by the mitochondrial polymerase. The enzyme may use the alignment and prevention of fraying provided by proper hydrogen bonding and minor groove hydrogen bonding interactions as critical criteria for correct base pair recognition.

Fluorobenzene-nucleobase interactions: hydrogen bonding or pi-stacking?

Studies on modified DNA oligomers and polymerase reactions have previously demonstrated that canonical nucleobases can exhibit stable and even selective pairing with shape-complementary fluorobenzene nucleotides. Because of the fluorination of the pairing edges, hydrogen bonds are believed to be absent, and the local DNA stability has been attributed to pi-stacking and shape complementarity. Using two-color resonant two-photon ionization and fluorescence emission spectroscopies, we show here that supersonically cooled complexes of the nucleobase analogue 2-pyridone with seven substituted fluorobenzenes (1-fluorobenzene, 1,2- and 1,4-difluorobenzene, 1,3,5- and 1,2,3-trifluorobenzene, 1,2,4,5- and 1,2,3,4-tetrafluorobenzene) are hydrogen-bonded and not pi-stacked. The S1 <--> S0 vibronic spectra show intermolecular vibrational frequencies that are characteristic for doubly hydrogen bonded complexes. The bands shift to the blue with increasing hydrogen-bond strength; the measured spectral blue shifts deltanu are in excellent agreement with the ab initio calculated shifts. The spectral shifts are also linearly correlated with the calculated hydrogen-bond dissociation energies D0, published in a companion paper (Frey, J. A.; Leist, R.; Leutwyler, S. J. Phys. Chem. A 2006, 110, 4188). This correlation allows us to reliably estimate the ground-state dissociation energies as D0 approximately 6 kcal/mol of the 2-pyridone.fluorobenzene complexes from the observed spectral shifts.

The model student: what chemical model systems can teach us about biology

Model systems have evolved with the times, making use of modern biological methods and incorporating biological complexity. This evolution has increased the relevance of models as tools for studying biology.

Human DNA polymerase alpha uses a combination of positive and negative selectivity to polymerize purine dNTPs with high fidelity

DNA polymerases accurately replicate DNA by incorporating mostly correct dNTPs opposite any given template base. We have identified the chemical features of purine dNTPs that human pol alpha uses to discriminate between right and wrong dNTPs. Removing N-3 from guanine and adenine, two high-fidelity bases, significantly lowers fidelity. Analogously, adding the equivalent of N-3 to low-fidelity benzimidazole-derived bases (i.e., bases that pol alpha rapidly incorporates opposite all four natural bases) and to generate 1-deazapurines significantly strengthens the ability of pol alpha to identify the resulting 1-deazapurines as wrong. Adding the equivalent of the purine N-1 to benzimidazole or to 1-deazapurines significantly decreases the rate at which pol alpha polymerizes the resulting bases opposite A, C, and G while simultaneously enhancing polymerization opposite T. Conversely, adding the equivalent of adenine's C-6 exocyclic amine (N-6) to 1- and 3-deazapurines also enhances polymerization opposite T but does not significantly decrease polymerization opposite A, C, and G. Importantly, if the newly inserted bases lack N-1 and N-6, pol alpha does not efficiently polymerize the next correct dNTP, whereas if it lacks N-3, one additional nucleotide is added and then chain termination ensues. These data indicate that pol alpha uses two orthogonal screens to maximize its fidelity. During dNTP polymerization, it uses a combination of negative (N-1 and N-3) and positive (N-1 and N-6) selectivity to differentiate between right and wrong dNTPs, while the shape of the base pair is essentially irrelevant. Then, to determine whether to add further dNTPs onto the just added nucleotide, pol alpha appears to monitor the shape of the base pair at the primer 3'-terminus. The biological implications of these results are discussed.

Synthesis and characterization of the oxidized dGTP lesions spiroiminodihydantoin-2'-deoxynucleoside-5'- triphosphate and guanidinohydantoin-2'-deoxynucleoside-5'- triphosphate

Two convenient synthetic routes to the oxidized guanosine triphosphate lesions spiroiminodihydantoin-2'-deoxynucleoside-5'-triphosphate (dSpTP) and guanidinohydantoin-2'-deoxynucleoside-5'-triphosphate (dGhTP) are reported. Both two-electron oxidation of 2'-deoxy-7,8-dihydro-8-oxoguanosine-5'-triphosphate (dOGTP) using SO4*- generated photolytically from K2S2O8 or four-electron oxidation of 2'-deoxyguanosine-5'-triphosphate (dGTP) from singlet oxygen provide either dSpTP or dGhTP at pH 8.0 or 4.4, respectively. Highly purified triphosphates are obtained by ion pair reversed-phase HPLC.

Regulation of DNA repair fidelity by molecular checkpoints: "gates" in DNA polymerase beta's substrate selection

With an increasing number of structural, kinetic, and modeling studies of diverse DNA polymerases in various contexts, a complex dynamical view of how atomic motions might define molecular "gates" or checkpoints that contribute to polymerase specificity and efficiency is emerging. Such atomic-level information can offer insights into rate-limiting conformational and chemical steps to help piece together mechanistic views of polymerases in action. With recent advances, modeling and dynamics simulations, subject to the well-appreciated limitations, can access transition states and transient intermediates along a reaction pathway, both conformational and chemical, and such information can help bridge the gap between experimentally determined equilibrium structures and mechanistic enzymology data. Focusing on DNA polymerase beta (pol beta), we present an emerging view of the geometric, energetic, and dynamic selection criteria governing insertion rate and fidelity mechanisms of DNA polymerases, as gleaned from various computational studies and based on the large body of existing kinetic and structural data. The landscape of nucleotide insertion for pol beta includes conformational changes, prechemistry, and chemistry "avenues", each with a unique deterministic or stochastic pathway that includes checkpoints for selective control of nucleotide insertion efficiency. For both correct and incorrect incoming nucleotides, pol beta's conformational rearrangements before chemistry include a cascade of slow and subtle side chain rearrangements, followed by active site adjustments to overcome higher chemical barriers, which include critical ion-polymerase geometries; this latter notion of a prechemistry avenue fits well with recent structural and NMR data. The chemical step involves an associative mechanism with several possibilities for the initial proton transfer and for the interaction among the active site residues and bridging water molecules. The conformational and chemical events and associated barriers define checkpoints that control enzymatic efficiency and fidelity. Understanding the nature of such active site rearrangements can facilitate interpretation of existing data and stimulate new experiments that aim to probe enzyme features that contribute to fidelity discrimination across various polymerases via such geometric, dynamic, and energetic selection criteria.

Artificially expanded genetic information system: a new base pair with an alternative hydrogen bonding pattern

To support efforts to develop a ‘synthetic biology’ based on an artificially expanded genetic information system (AEGIS), we have developed a route to two components of a non-standard nucleobase pair, the pyrimidine analog 6-amino-5-nitro-3-(1′-β-D-2′-deoxyribofuranosyl)-2(1H)-pyridone (dZ) and its Watson–Crick complement, the purine analog 2-amino-8-(1′-β-D-2′-deoxyribofuranosyl)-imidazo[1,2-a]-1,3,5-triazin-4(8H)-one (dP). These implement the pyDDA:puAAD hydrogen bonding pattern (where ‘py’ indicates a pyrimidine analog and ‘pu’ indicates a purine analog, while A and D indicate the hydrogen bonding patterns of acceptor and donor groups presented to the complementary nucleobases, from the major to the minor groove). Also described is the synthesis of the triphosphates and protected phosphoramidites of these two nucleosides. We also describe the use of the protected phosphoramidites to synthesize DNA oligonucleotides containing these AEGIS components, verify the absence of epimerization of dZ in those oligonucleotides, and report some hybridization properties of the dZ:dP nucleobase pair, which is rather strong, and the ability of each to effectively discriminate against mismatches in short duplex DNA.

Mechanism of template-independent nucleotide incorporation catalyzed by a template-dependent DNA polymerase

Numerous template-dependent DNA polymerases are capable of catalyzing template-independent nucleotide additions onto blunt-end DNA. Such non-canonical activity has been hypothesized to increase the genomic hypermutability of retroviruses including human immunodeficiency viruses. Here, we employed pre-steady state kinetics and X-ray crystallography to establish a mechanism for blunt-end additions catalyzed by Sulfolobus solfataricus Dpo4. Our kinetic studies indicated that the first blunt-end dATP incorporation was 80-fold more efficient than the second, and among natural deoxynucleotides, dATP was the preferred substrate due to its stronger intrahelical base-stacking ability. Such base-stacking contributions are supported by the 41-fold higher ground-state binding affinity of a nucleotide analog, pyrene nucleoside 5'-triphosphate, which lacks hydrogen bonding ability but possesses four conjugated aromatic rings. A 2.05 A resolution structure of Dpo4*(blunt-end DNA)*ddATP revealed that the base and sugar of the incoming ddATP, respectively, stack against the 5'-base of the opposite strand and the 3'-base of the elongating strand. This unprecedented base-stacking pattern can be applied to subsequent blunt-end additions only if all incorporated dAMPs are extrahelical, leading to predominantly single non-templated dATP incorporation.

Site-directed mutagenesis in the fingers subdomain of HIV-1 reverse transcriptase reveals a specific role for the beta3-beta4 hairpin loop in dNTP selection

HIV-1 reverse transcriptase shares the key features of high fidelity polymerases, such as a closed architecture of the active site, but displays a level of fidelity that is intermediate to that of high fidelity, replicative polymerases and low fidelity translesion synthesis (TLS) polymerases. The beta3-beta4 loop of the HIV-1 RT fingers subdomain makes transient contacts with the dNTP and template base. To investigate the role of active site architecture in HIV-1 RT fidelity, we truncated the beta3-beta4 loop, eliminating contact between Lys65 and the gamma-phosphate of dNTP. The mutant, in a manner reminiscent of TLS polymerases, was only able to incorporate a nucleotide that was capable of base-pairing with the template nucleotide, but not a nucleotide shape-analog incapable of Watson-Crick hydrogen bonding. Unexpectedly, however, the deletion mutant differed from the TLS polymerases in that it displayed an increased fidelity. The increased fidelity was associated with reduced dNTP binding affinity as measured using the dead end complex formation. In an effort to delineate the specific amino acid residue in the deleted segment responsible for this phenotype, we examined the K65 residue. Two substitution mutants, K65R and K65A were studied. The K65A mutant behaved similarly to the deletion mutant displaying dependence on Watson-Crick hydrogen bonding, increased fidelity and reduced dNTP-binding, while the K65R was more akin to wild-type enzyme. These results underscore the key role of the K65 residue in the phenotype observed in the deletion mutant. Based on the well-known electrostatic interaction between K65 and the gamma-phosphate moiety of incoming dNTP substrate in the ternary complex structure of HIV-1 RT, we conclude that non-discriminatory interactions between beta3-beta4 loop and the dNTP in wild-type HIV-1 RT help lower dNTP selectivity. Our results show that the fidelity of dNTP insertion is influenced by protein interactions with the triphosphate moiety.

2005 Emil Thomas Kaiser Award

Collagen is the most abundant protein in animals. The conformational stability of the collagen triple helix is enhanced by the hydroxyl group of its prevalent (2S,4R)-4-hydroxyproline residues. For 25 years, the prevailing paradigm had been that this enhanced stability is due to hydrogen bonds mediated by bridging water molecules. We tested this hypothesis with synthetic collagen triple helices containing 4-fluoroproline residues. The results have unveiled a wealth of stereoelectronic effects that contribute markedly to the stability of collagen, as well as other proteins. This new understanding is leading to synthetic collagens for a variety of applications in biotechnology and biomedicine.

Fluorous base-pairing effects in a DNA polymerase active site

We describe selective "fluorous" effects in the active site of a DNA polymerase, by using nucleotide analogues whose pairing edges are perfluorinated. The 5'-triphosphate deoxynucleotide derivatives of DNA base analogues 2,3,4,5-tetrafluorobenzene ((F)B) and 4,5,6,7-tetrafluoroindole ((F)I), as well as hydrocarbon controls benzene (B) and indole (I), were synthesized and studied as substrates for the DNA Polymerase I Klenow fragment (KF exo-). Modified nucleotides were present in the DNA template or were supplied as nucleoside triphosphates in studies of the steady-state kinetics of single nucleotide insertion. When supplied opposite the non-natural bases in the template strand, the hydrophobic nucleoside triphosphates were incorporated by up to two orders of magnitude more efficiently than the natural deoxynucleoside triphosphates. The purine-like fluorinated indole nucleotide ((F)I) was the most efficiently inserted of the four hydrophobic analogues, with the most effective incorporation occurring opposite the pyrimidine-like tetrafluorobenzene ((F)B). In all cases, the polyfluorinated base pairs were more efficiently processed than the analogous hydrocarbon pairs. A preliminary test of polymerase extension beyond these pairs showed that only the (F)B base is appreciably extended; the inefficient extension is consistent with recently published data regarding other nonpolar base pairs. These results suggest the importance of hydrophobicity, stacking, and steric interactions in the polymerase-mediated replication of DNA base pairs that lack hydrogen bonds. These findings further suggest that the enhanced hydrophobicity of polyfluoroaromatic bases could be employed in the design of new, selective base pairs that are orthogonal to the natural Watson-Crick pairs used in replication.

pentafluorophenyl-phenyl interactions in biphenyl-DNA

We prepared and investigated oligonucleotide duplexes of the sequence d(GATGAC(X)nGCTAG).d(CTAGC(Y)nGTCATC), in which X and Y designate biphenyl- (bph) and pentafluorobiphenyl- ((5F)bph) C-nucleotides, respectively, and n varies from 0-4. These hydrophobic base substitutes are expected to adopt a zipperlike, interstrand stacking motif, in which not only bph/bph or (5F)bph/(5F)bph homo pairs, but also (5F)bph/bph mixed pairs can be formed. By performing UV-melting curve analysis we found that incorporation of a single (5F)bph/(5F)bph pair leads to a duplex that is essentially as stable as the unmodified duplex (n=0), and 2.4 K more stable than the duplex with the nonfluorinated bph/bph pair. The T(m) of the mixed bph/(5F)bph pair was in between the T(m) values of the respective homo pairs. Additional, unnatural aromatic pairs increased the T(m) by +3.0-4.4 K/couple, irrespective of the nature of the aromatic residue. A thermodynamic analysis using isothermal titration calorimetry (ITC) of a series of duplexes with n=3 revealed lower (less negative) duplex formation enthalpies (DeltaH) in the (5F)bph/(5F)bph case than in the bph/bph case, and confirmed the higher thermodynamic stability (DeltaG) of the fluorinated duplex, suggesting it to be of entropic origin. Our data are compatible with a model in which the stacking of (5F)bph versus bph is dominated by dehydration of the aromatic units upon duplex formation. They do not support a model in which van der Waals dispersive forces (induced dipoles) or electrostatic (quadrupole) interactions play a dominant role.

Bipyridyl- and biphenyl-DNA: a recognition motif based on interstrand aromatic stacking

The synthesis and incorporation into oligonucleotides of C-nucleosides containing the two aromatic, non-hydrogen-bonding nucleobase substitutes biphenyl (I) and bipyridyl (Y) are described. Their homo- and hetero-recognition properties in different sequential arrangements were then investigated via UV-melting curve analysis, gel mobility assays, CD- and NMR spectroscopy. An NMR analysis of a dodecamer duplex containing one biphenyl pair in the center, as well as CD data on duplexes with multiple insertions provide further evidence for the zipper-like interstrand stacking motif that we proposed earlier based on molecular modeling. UV-thermal melting experiments with duplexes containing one to up to seven I- or Y base pairs revealed a constant increase in T(m) in the case of I and a constant decrease for Y. Mixed I/Y base pairs lead to stabilities in between the homoseries. Insertion of alternating I/abasic site- or Y/abasic site pairs strongly decreases the thermal stability of duplexes. Asymmetric distribution of I- or Y residues on either strand of the duplex were also investigated in this context. Duplexes with three natural base pairs at both ends and 50 % of I pairs in the center are still readily formed, while duplexes with blunt ended I pairs tend to aggregate unspecifically. Duplexes with one natural overhang at the end of a I-I base pair tract can both aggregate or form ordered duplexes, depending on the nature of the natural bases in the overhang.

The difluorotoluene debate--a decade later

2,4-Difluorotoluene is unusual among hydrofluorocarbons because it is shaped like the DNA base thymine. It was first synthesised as a nucleotide analogue and incorporated into DNA a decade ago. Although it is a nonpolar molecule, it was found to be replicated by DNA polymerase enzymes as if it were thymine. We concluded that replication of DNA base pairs can occur without Watson-Crick hydrogen bonds, and hypothesised that steric effects, rather than these hydrogen bonds, were the main arbiters of DNA replication fidelity. A debate was initiated then, with claims by some that the molecule is polar and forms hydrogen bonds with adenine, thus supporting the hydrogen bonding theory of DNA replication. Here we discuss the evolution of this debate, and reflect on the relevant data that have since come from hundreds of papers and dozens of laboratories. Although discussion on this topic continues, the steric hypothesis for DNA replication is now widely accepted among biochemists, and the changing paradigm has been reflected in textbooks.

Optimization of unnatural base pair packing for polymerase recognition

As part of an effort to expand the genetic alphabet, we have been examining the ability of predominately hydrophobic nucleobase analogues to pair in duplex DNA and during polymerase-mediated replication. We previously reported the synthesis and thermal stability of unnatural base pairs formed between nucleotides bearing simple methyl-substituted phenyl ring nucleobase analogues. Several of these pairs are virtually as stable and selective as natural base pairs in the same sequence context. Here, we report the characterization of polymerase-mediated replication of the same unnatural base pairs. We find that every facet of replication, including correct and incorrect base pair synthesis, as well as continued primer extension beyond the unnatural base pair, is sensitive to the specific methyl substitution pattern of the nucleobase analogue. The results demonstrate that neither hydrogen bonding nor large aromatic surface area is required for polymerase recognition, and that interstrand interactions between small aromatic rings may be optimized for replication. Combined with our previous results, these studies suggest that appropriately derivatized phenyl nucleobase analogues represent a promising approach toward developing a third base pair and expanding the genetic alphabet.

Dynamics of nucleotide incorporation: snapshots revealed by 2-aminopurine fluorescence studies

Formation of a noncanonical base pair between dFTP, a dTTP analogue that cannot form H bonds, and the fluorescent base analogue 2-aminopurine (2AP) was studied in order to discover how the bacteriophage T4 DNA polymerase selects nucleotides with high accuracy. Changes in 2AP fluorescence intensity provided a spectroscopic reporter of the nucleotide binding reactions, which were combined with rapid-quench, pre-steady-state reactions to measure product formation. These studies supported and extended previous findings that the T4 DNA polymerase binds nucleotides in multiple steps with increasing selectivity. With 2AP in the template position, initial dTTP binding was rapid but selective: K(d(dTTP)) (first step) = 31 microM; K(d(dCTP)) (first step) approximately 3 mM. In studies with dFTP, this step was revealed to have two components: formation of an initial preinsertion complex in which H bonds between bases in the newly forming base pair were not essential, which was followed by formation of a final preinsertion complex in which H bonds assisted. The second nucleotide binding step was characterized by increased discrimination against dTTP binding opposite template 2AP, K(d) (second step) = 367 microM, and additional conformational changes were detected in ternary enzyme-DNA-dTTP complexes, as expected for forming closed complexes. We demonstrate here that the second binding step occurs before formation of the phosphodiester bond. Thus, the high fidelity of nucleotide insertion by T4 DNA polymerase is accomplished by the sequential application of selectivity in first forming accurate preinsertion complexes, and then additional conformational changes are applied that further increase discrimination against incorrect nucleotides.

Gene silencing activity of siRNAs with a ribo-difluorotoluyl nucleotide

Recently, chemically synthesized short interfering RNA (siRNA) duplexes have been used with success for gene silencing. Chemical modification is desired for therapeutic applications to improve biostability and pharmacokinetic properties; chemical modification may also provide insight into the mechanism of silencing. siRNA duplexes containing the 2,4-difluorotoluyl ribonucleoside (rF) were synthesized to evaluate the effect of noncanonical nucleoside mimetics on RNA interference. 5'-Modification of the guide strand with rF did not alter silencing relative to unmodified control. Internal uridine to rF substitutions were well-tolerated. Thermal melting analysis showed that the base pair between rF and adenosine (A) was destabilizing relative to a uridine-adenosine pair, although it was slightly less destabilizing than other mismatches. The crystal structure of a duplex containing rFoA pairs showed local structural variations relative to a canonical RNA helix. As the fluorine atoms cannot act as hydrogen bond acceptors and are more hydrophobic than uridine, there was an absence of a well-ordered water structure around the rF residues in both grooves. siRNAs with the rF modification effectively silenced gene expression and offered improved nuclease resistance in serum; therefore, evaluation of this modification in therapeutic siRNAs is warranted.

DNA polymerase catalysis in the absence of Watson-Crick hydrogen bonds: analysis by single-turnover kinetics

We report the first pre-steady-state kinetic studies of DNA replication in the absence of hydrogen bonds. We have used nonpolar nucleotide analogues that mimic the shape of a Watson-Crick base pair to investigate the kinetic consequences of a lack of hydrogen bonds in the polymerase reaction catalyzed by the Klenow fragment of DNA polymerase I from Escherichia coli. With a thymine isostere lacking hydrogen-bonding ability in the nascent pair, the efficiency (k(pol)/Kd) of the polymerase reaction is decreased by 30-fold, affecting the ground state (Kd) and transition state (k(pol)) approximately equally. When both thymine and adenine analogues in the nascent pair lack hydrogen-bonding ability, the efficiency of the polymerase reaction is decreased by about 1000-fold, with most of the decrease attributable to the transition state. Reactions using nonpolar analogues at the primer-terminal base pair demonstrated the requirement for a hydrogen bond between the polymerase and the minor groove of the primer-terminal base. The R668A mutation of Klenow fragment abolished this requirement, identifying R668 as the probable hydrogen-bond donor. Detailed examination of the kinetic data suggested that Klenow fragment has an extremely low tolerance of even minor deviations of the analogue base pairs from ideal Watson-Crick geometry. Consistent with this idea, some analogue pairings were better tolerated by Klenow fragment mutants having more spacious active sites. In contrast, the Y-family polymerase Dbh was much less sensitive to changes in base pair dimensions and more dependent upon hydrogen bonding between base-paired partners.

Substituent effects on the pairing and polymerase recognition of simple unnatural base pairs

As part of an effort to develop stable and replicable unnatural base pairs, we have evaluated a large number of unnatural nucleotides with predominantly hydrophobic nucleobases. Despite its limited aromatic surface area, a nucleobase analog scaffold that has emerged as being especially promising is the simple phenyl ring. Modifications of this scaffold with methyl and fluoro groups have been shown to impact base pair stability and polymerase recognition, suggesting that nucleobase shape, hydrophobicity and electrostatics are important. To further explore the impact of heteroatom substitution within this nucleobase scaffold, we report the synthesis, stability and polymerase recognition of nucleoside analogs bearing single bromo- or cyano-derivatized phenyl rings. Both modifications are found to generally stabilize base pair formation to a greater extent than methyl or fluoro substitution. Moreover, polymerase recognition of the unnatural base pairs is found to be very sensitive to both the position and nature of the heteroatom substituent. The results help identify the determinants of base pair stability and efficient replication and should contribute to the effort to develop stable and replicable unnatural base pairs.

Hydrogen Bonding of the Nucleobase Mimic 2-Pyridone to Fluorobenzenes: An ab Initio Investigation

The hydrogen-bonded complexes of the nucleobase mimic 2-pyridone (2PY) with seven different fluorinated benzenes (1-, 1,2-, 1,4-, 1,2,3-, 1,3,5-, 1,2,3,4-, and 1,2,4,5-fluorobenzene) are important model systems for investigating the relative importance of hydrogen bonding versus pi-stacking interactions in DNA. We have shown by supersonic-jet spectroscopy that these dimers are hydrogen bonded and not pi-stacked at low temperature (Leist, R.; Frey, J. A.; Leutwyler, S. J. Phys. Chem. A 2006, 110, 4180). Their geometries and binding energies D(e) were calculated using the resolution of identity (RI) Møller-Plesset second-order perturbation theory method (RIMP2). The most stable dimers are bound by antiparallel N-H...F-C and C-H...O=C hydrogen bonds. The binding energies are extrapolated to the complete basis set (CBS) limit, , using the aug-cc-pVXZ basis set series. The CBS binding energies range from -D(e,CBS) = 6.4-6.9 kcal/mol and the respective dissociation energies from -D(0,CBS) = 5.9-6.3 kcal/mol. In combination with experiment, the latter represent upper limits to the dissociation energies of the pi-stacked isomers (which are not observed experimentally). The individual C-H...O=C and N-H...F-C contributions to D(e) can be approximately separated. They are nearly equal for 2PY.fluorobenzene; each additional F atom strengthens the C-H...O=C hydrogen bond by approximately 0.5 kcal/mol and weakens the C-F...H-N hydrogen bond by approximately 0.3 kcal/mol. The single H-bond strengths and lengths correlate with the gas-phase acid-base properties of the C-H and C-F groups of the fluorobenzenes.

Functional evidence for a small and rigid active site in a high fidelity DNA polymerase: probing T7 DNA polymerase with variably sized base pairs

Hypotheses on the origins of high fidelity in replicative DNA polymerases have recently focused on the importance of geometric or steric effects in this selectivity. Here we reported a systematic study of the effects of base pair size in T7 DNA polymerase (pol), the replicative enzyme for bacteriophage T7. We varied base pair size in very small (0.25 A) increments by use of a series of nonpolar thymidine shape mimics having gradually increasing size. Steady-state kinetics were evaluated for the 5A7A exonuclease-deficient mutant in a 1:1 complex with thioredoxin. For T7 pol, we studied insertion of natural nucleotides opposite variably sized T analogs in the template and, conversely, for variably sized dTTP analogs opposite natural template bases. The enzyme displayed extremely high selectivity for a specific base pair size, with drops in efficiency of as much as 280-fold for increases of 0.4 A beyond an optimum size approximating the size of a natural pair. The enzyme also strongly rejected pairs that were smaller than the optimum by as little as 0.3 A. The size preferences with T7 DNA pol were generally smaller, and the steric rejection was greater than DNA pol I Klenow fragment, correlating with the higher fidelity of the former. The hypothetical effects of varied active site size and rigidity are discussed. The data lend direct support to the concept that active site tightness is a chief determinant of high fidelity of replicative polymerases and that a less rigid (looser) and larger active site can lead to lower fidelity.

Probing the active site tightness of DNA polymerase in subangstrom increments

We describe the use of a series of gradually expanded thymine nucleobase analogs in probing steric effects in DNA polymerase efficiency and fidelity. In these nonpolar compounds, the base size was increased incrementally over a 1.0-A range by use of variably sized atoms (H, F, Cl, Br, and I) to replace the oxygen molecules of thymine. Kinetics studies with DNA Pol I (Klenow fragment, exonuclease-deficient) in vitro showed that replication efficiency opposite adenine increased through the series, reaching a peak at the chlorinated compound. Efficiency then dropped markedly as a steric tightness limit was apparently reached. Importantly, fidelity also followed this trend, with the fidelity maximum at dichlorotoluene, the largest compound that fits without apparent repulsion. The fidelity at this point approached that of wild-type thymine. Surprisingly, the maximum fidelity and efficiency was found at a base pair size significantly larger than the natural size. Parallel bypass and mutagenesis experiments were then carried out in vivo with a bacterial assay for replication. The cellular results were virtually the same as those seen in solution. The results provide direct evidence for the importance of a tight steric fit on DNA replication fidelity. In addition, the results suggest that even high-fidelity replicative enzymes have more steric room than necessary, possibly to allow for an evolutionarily advantageous mutation rate.

Eukaryotic translesion synthesis DNA polymerases: specificity of structure and function

This review focuses on eukaryotic translesion synthesis (TLS) DNA polymerases, and the emphasis is on Saccharomyces cerevisiae and human Y-family polymerases (Pols) eta, iota, kappa, and Rev1, as well as on Polzeta, which is a member of the B-family polymerases. The fidelity, mismatch extension ability, and lesion bypass efficiencies of these different polymerases are examined and evaluated in the context of their structures. One major conclusion is that, despite the overall similarity of basic structural features among the Y-family polymerases, there is a high degree of specificity in their lesion bypass properties. Some are able to bypass a particular DNA lesion, whereas others are efficient at only the insertion step or the extension step of lesion bypass. This functional divergence is related to the differences in their structures. Polzeta is a highly specialized polymerase specifically adapted for extending primer termini opposite from a diverse array of DNA lesions, and depending upon the DNA lesion, it contributes to lesion bypass in a mutagenic or in an error-free manner. Proliferating cell nuclear antigen (PCNA) provides the central scaffold to which TLS polymerases bind for access to the replication ensemble stalled at a lesion site, and Rad6-Rad18-dependent protein ubiquitination is important for polymerase exchange.

The use of thymidine analogs to improve the replication of an extra DNA base pair: a synthetic biological system

Synthetic biology based on a six-letter genetic alphabet that includes the two non-standard nucleobases isoguanine (isoG) and isocytosine (isoC), as well as the standard A, T, G and C, is known to suffer as a consequence of a minor tautomeric form of isoguanine that pairs with thymine, and therefore leads to infidelity during repeated cycles of the PCR. Reported here is a solution to this problem. The solution replaces thymidine triphosphate by 2-thiothymidine triphosphate (2-thioTTP). Because of the bulk and hydrogen bonding properties of the thione unit in 2-thioT, 2-thioT does not mispair effectively with the minor tautomer of isoG. To test whether this might allow PCR amplification of a six-letter artificially expanded genetic information system, we examined the relative rates of misincorporation of 2-thioTTP and TTP opposite isoG using affinity electrophoresis. The concentrations of isoCTP and 2-thioTTP were optimal to best support PCR amplification using thermostable polymerases of a six-letter alphabet that includes the isoC–isoG pair. The fidelity-per-round of amplification was found to be ∼98% in trial PCRs with this six-letter DNA alphabet. The analogous PCR employing TTP had a fidelity-per-round of only ∼93%. Thus, the A, 2-thioT, G, C, isoC, isoG alphabet is an artificial genetic system capable of Darwinian evolution.

Evidence for a Watson-Crick hydrogen bonding requirement in DNA synthesis by human DNA polymerase kappa

The efficiency and fidelity of nucleotide incorporation by high-fidelity replicative DNA polymerases (Pols) are governed by the geometric constraints imposed upon the nascent base pair by the active site. Consequently, these polymerases can efficiently and accurately replicate through the template bases which are isosteric to natural DNA bases but which lack the ability to engage in Watson-Crick (W-C) hydrogen bonding. DNA synthesis by Poleta, a low-fidelity polymerase able to replicate through DNA lesions, however, is inhibited in the presence of such an analog, suggesting a dependence of this polymerase upon W-C hydrogen bonding. Here we examine whether human Polkappa, which differs from Poleta in having a higher fidelity and which, unlike Poleta, is inhibited at inserting nucleotides opposite DNA lesions, shows less of a dependence upon W-C hydrogen bonding than does Poleta. We find that an isosteric thymidine analog is replicated with low efficiency by Polkappa, whereas a nucleobase analog lacking minor-groove H bonding potential is replicated with high efficiency. These observations suggest that both Poleta and Polkappa rely on W-C hydrogen bonding for localizing the nascent base pair in the active site for the polymerization reaction to occur, thus overcoming these enzymes' low geometric selectivity.

A set of nonpolar thymidine nucleoside analogues with gradually increasing size

[structure: see text] We describe a series of nonpolar nucleoside analogues having similar shapes and gradually increasing size. The structure of the nucleobase thymine was mimicked with toluene derivatives, replacing O2/O4 with hydrogen, fluorine, chlorine, bromine, and iodine. Glycosidic bonds were formed by reactions of lithiated 2,4-dihalotoluenes with a deoxyribonolactone derivative. Structural analysis by NMR showed similar conformations across the series. The compounds are useful for study of the biological recognition of nucleotides and nucleic acids.

A series of nonpolar thymidine analogues of increasing size: DNA base pairing and stacking properties

[reaction: see text] We describe the properties in DNA of a set of five nonpolar nucleoside mimics in which shape is similar but size is increased gradually. The compounds vary in the size of their exocyclic substituents, which range from hydrogen to iodine, and are designed to test the steric effects of nucleosides, nucleotides, and DNA in biological systems in a systematic way. We describe the conversion of toluene, 2,4-difluorotoluene, 2,4-dichlorotoluene, 2,4-dibromotoluene, and 2,4-diiodotoluene deoxyribosides into suitably protected phosphoramidite derivatives and their incorporation into synthetic DNAs. Studies of their behavior in the context of hexamer and dodecamer duplexes were carried out, with comparison to natural thymine. Thermal melting data with compounds in 5' dangling positions showed that all five compounds stack more strongly than thymine, and all the dihalo-substituted cases stack more strongly than the unsubstituted toluene case. Stacking correlated with surface area and hydrophobicity, both of which increase across the series. In base-pairing studies, all five compounds showed destabilized pairing opposite natural bases (relative to thymine-adenine pairing), as expected. Notably, pairing among the nonpolar base analogues was considerably more stable, and some of the pairs involving the largest analogues showed stability equal to that of a natural thymine-adenine pair. The results establish the base pairing properties of a potentially useful new series of biochemical probes for DNA-protein interactions and also identify a set of new, stable hydrophobic base pairs for designed genetic pairing systems.