Engineering of osteochondral tissue with bone marrow mesenchymal progenitor cells in a derivatized hyaluronan-gelatin composite sponge

Human mesenchymal progenitor cell-based tissue engineering of a single-unit osteochondral construct

A desirable strategy for articular cartilage repair is to surgically replace the damaged area with an in vitro-engineered osteochondral plug. We report here the development of a novel osteochondral construct using human trabecular bone-derived mesenchymal progenitor cells and a biodegradable poly-D,L-lactic acid scaffold. The cartilage layer was fabricated by press-coating a chondrifying high-density cell pellet onto the scaffold, which was then loaded with cells previously initiated to undergo osteogenesis. The composite was then cultured in a cocktail medium formulated to maintain both chondrogenesis and osteogenesis. Macroscopically, the construct consisted of a cartilage-like layer adherent to, and overlying, a dense bone-like component. RT-PCR, immunohistochemistry, and histology revealed hyaline-like cartilage and bone with an interface resembling the native osteochondral junction. All parameters, including mechanical properties, improved with increased culture time. The single-cell source nature of the construct, which minimizes handling while maximizing biocompatibility, suggests applicability for articular cartilage repair.

Neocartilage from human mesenchymal stem cells in alginate: Implied timing of transplantation

Previous reports have demonstrated the suitability of alginate microencapsulation for chondrogenesis of human mesenchymal stem cells (MSCs) in vitro. This study examined the MSCs-alginate constructs that were transplanted beneath the dorsal skin of nude mice for 8 weeks after a variety of in vitro culture periods. The in vitro culture had great effects on gross morphology and histological characteristics of transplants. The integrity of alginate of transplants increased as the in vitro culture period increased. Transplants were characterized by an opaque and yellowish color, fair burnish, a firm to elastic texture, but without any evidence of calcification spots. Histological findings agreed with the clinical determination of hyaline cartilage, characterized by isolated cells with basophilic ground substance positive in Safranin-O staining and collagen type II immunohistochemistry. Transplants with exposure to TGF-beta1 for more than 2 weeks before transplantation, lost burnish, were flexible in texture, and had an increased formation of calcification spots. Accordingly, 1-week exposure to TGF-beta1 in vitro before transplantation is appropriate for neocartilage formation of human MSCs in alginate. These findings suggested that regeneration using cell therapy or tissue engineering should assist in ascertaining the optimal timing of transplantation.

Strategies for directing the differentiation of stem cells into the osteogenic lineage in vitro

A major area in regenerative medicine is the application of stem cells in bone reconstruction and bone tissue engineering. This will require well-defined and efficient protocols for directing the differentiation of stem cells into the osteogenic lineage, followed by their selective purification and proliferation in vitro. The development of such protocols would reduce the likelihood of spontaneous differentiation of stem cells into divergent lineages on transplantation, as well as reduce the risk of teratoma formation in the case of embryonic stem cells. Additionally, such protocols could provide useful in vitro models for studying osteogenesis and bone development, and facilitate the genetic manipulation of stem cells for therapeutic applications. The development of pharmokinetic and cytotoxicity/genotoxicity screening tests for bone-related biomaterials and drugs could also use protocols developed for the osteogenic differentiation of stem cells. This review critically examines the various strategies that could be used to direct the differentiation of stem cells into the osteogenic lineage in vitro.

Influence of different collagen species on physico-chemical properties of crosslinked collagen matrices

Collagen-based scaffolds are appealing products for the repair of cartilage defects using tissue engineering strategies. The present study investigated the species-related differences of collagen scaffolds with and without 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC)/N-hydroxysuccinimide (NHS)-crosslinking. Resistance against collagenase digestion, swelling ratio, amino acid sequence, shrinkage temperature, ultrastructural matrix morphology, crosslinking density and stress-strain characteristics were determined to evaluate the physico-chemical properties of equine- and bovine-collagen-based scaffolds. Three-factor ANOVA analysis revealed a highly significant effect of collagen type (p=0.0001), crosslinking (p=0.0001) and time (p=0.0001) on degradation of the collagen samples by collagenase treatment. Crosslinked equine collagen samples showed a significantly reduced swelling ratio compared to bovine collagen samples (p< 0.0001). The amino acid composition of equine collagen revealed a higher amount of hydroxylysine and lysine. Shrinkage temperatures of non-crosslinked samples showed a significant difference between equine (60 degrees C) and bovine collagen (57 degrees C). Three-factor ANOVA analysis revealed a highly significant effect of collagen type (p=0.0001), crosslinking (p=0.0001) and matrix condition (p=0.0001) on rupture strength measured by stress-strain analysis. The ultrastructure, the crosslinking density and the strain at rupture between collagen matrices of both species showed no significant differences. For tissue engineering purposes, the higher enzymatic stability, the higher form stability, as well as the lower risk of transmissible disease make the case for considering equine-based collagen. This study also indicates that results obtained for scaffolds based on a certain collagen species may not be transferable to scaffolds based on another, because of the differing physico-chemical properties.

Differentiation, growth and activity of rat bone marrow stromal cells on resorbable poly(l/dl-lactide) membranes

Nonporous and porous membranes produced from poly(L/DL-lactide) 80/20% were characterized using profilometry, contact-angle measurements, infra-red spectroscopy, X-ray photoemission spectroscopy and scanning electron microscopy, and used to culture bone marrow stromal cells isolated from the rat femora. The cells were cultured for 5, 10, 15 and 20 days. Cell growth and activity was estimated from the amounts of DNA, alkaline phosphatase activity and total protein amount present in the cell lysate and cell differentiation was assessed histochemically. Cell morphology was estimated from scanning electron microscopy. The cells fully expressed osteoblastic phenotype, revealed spindle-shaped, ellipsoidal morphology, developed podia, produced an abundant fibrillar extracellular matrix and mineral noduli. The number of cells on the membranes increased with time of culturing and was higher for the porous membranes than the nonporous membranes. Osteoblastic differentiation was most significant between 5 and 10 days of culture. The total amounts of DNA, alkaline phosphatase and proteins increased with time of culturing. The surface characteristics of the porous membranes were superior to the nonporous membranes.

Effects of High Molecular Weight Hyaluronan on Chondrocytes Cultured within a Resorbable Gelatin Sponge

Freshly isolated bovine articular chondrocytes were seeded into a resorbable gelatin sponge and cultured in the absence or presence of extrinsic high molecular weight hyaluronan (HA) for up to 1 month. The gelatin sponge could be uniformly and reproducibly loaded with chondrocytes. Immunostaining demonstrated that accumulation of pericellular HA increased in the presence of extrinsic HA. However, this approach could not differentiate between extrinsic and endogenous HA. More chondrocytes were retained within the loaded sponges in the presence of HA. Both cell number and matrix synthesis were increased in the presence of high molecular weight HA throughout the time course. Proteoglycan synthesis per cell increased by 22-fold in the presence of HA at 500 microg/mL. Our model demonstrates that HA can be used as a tool not only to expand freshly isolated chondrocyte numbers but also to increase matrix synthesis and deposition within a resorbable gelatin sponge. Autologous chondrocytes for tissue engineering are always in short supply, so this could be a useful tool with which to increase the retention of cells seeded into other types of scaffold matrices before implanting them into a cartilage defect.

Chondrogenic Potential of Multipotential Cells from Human Adipose Tissue

The use of stem cells for cell-based tissue-engineering strategies represents a promising alternative for the repair of cartilaginous defects. The multilineage potential of a population of putative mesodermal stem cells obtained from human lipoaspirates, termed processed lipoaspirate cells, was previously characterized. The chondrogenic potential of those cells was confirmed with a combination of histological and molecular approaches. Processed lipoaspirate cells under high-density micromass culture conditions, supplemented with transforming growth factor-beta1, insulin, transferrin, and ascorbic acid, formed well-defined nodules within 48 hours of induction and expressed the cartilaginous markers collagen type II, chondroitin-4-sulfate, and keratan sulfate. Reverse transcription polymerase chain reaction analysis confirmed the expression of collagen type II and the cartilage-specific proteoglycan aggrecan. In summary, human adipose tissue may represent a novel plentiful source of multipotential stem cells capable of undergoing chondrogenesis in vitro.

Tissue engineering of cartilage

The primary goal of engineering cartilage as a therapeutic approach is to restore the physiological conditions of an affected or defective tissue in the body. Cartilage tissue is distributed widely in the human body and possesses an organization related to the specific demand of a particular anatomical region. In selecting the proper material for engineering cartilage, the functional demands of the replacement tissue must be considered. In summary, there is a multitude of scaffolds, naturally occurring and synthetic, that are suitable for engineering cartilage. Investigators have shown that the characteristics of the neocartilage differ significantly depending upon which scaffold is used. There are also large differences when a single scaffold is tested in vitro as opposed to in vivo. Moreover, the addition of other materials internally or externally to the cartilage composite influences the physical and biomechanical properties of the newly formed tissue. The results achieved so far are extremely encouraging and motivate further investigative efforts in the field. The biochemical composition and, more importantly, the biomechanical properties of the native tissue still represent the ideal replacement tissue.

Disulfide-crosslinked hyaluronan-gelatin sponge: growth of fibrous tissue in vivo

The modification of hyaluronan (HA) and gelatin using dithiobis(propanoic dihydrazide) (DTP) has provided two thiolated macromolecular components of the extracellular matrix (ECM), specifically HA-DTPH and gelatin-DTPH. Blends of these thiolated ECM components were crosslinked in air to form hydrogels that were interpenetrating disulfide-crosslinked networks. Lyophilization of the hydrogels afforded sponge-like macroporous scaffolds suitable for cell attachment and proliferation. Increasing percentages of gelatin-DTPH (0, 25, 50, and 75%) were blended with HA-DTPH, and the resulting sponges were evaluated in vitro and in vivo as scaffolds for tissue engineering by seeding with human tracheal scar (HTS) fibroblasts. While cells failed to attach and grow in HA-only sponges, the gelatin-modified HA sponges promoted cell adhesion, proliferation, and spreading in vitro. Optimal attachment and growth was observed with 50% gelatin-HA sponges. Cell attachment to the gelatin-HA sponge could be blocked by preincubation of cells with a soluble fibronectin peptide Gly-Arg-Gly-Asp (GRGD). Finally, HTS fibroblast-seeded gelatin-HA sponges were implanted into the flanks of nude mice and evaluated at 2 and 8 weeks postimplantation. The sponges were fully biocompatible and new fibrous tissue formed, gradually replacing the sponge-like scaffold. The gelatin-HA sponges act as synthetic, macroporous, covalent mimics of the ECM and constitute novel scaffolds for cell growth and tissue augmentation.

Chondrogenesis of human bone marrow-derived mesenchymal stem cells in agarose culture

Mesenchymal stem cells derived from human bone marrow (hBM-MSCs) can differentiate into chondrogenic cells for the potential treatment of injured articular cartilage. To evaluate agarose gels as a supportive material for chondrogenesis of hBM-MSCs, this study examined chondrogenesis of hBM-MSCs in the agarose cultures. Pellet cultures were employed to confirm the chondrogenic potential of the hBM-MSCs that were used in agarose cultures. The hBM-MSCs were seeded in 2% agarose constructs at the initial cell-seeding densities of 3, 6, and 9 x 10(6) cells/ml while each of pellets was formed using 2.5 x 10(5) cells. Chondrogenesis of hBM-MSCs was induced by culturing cell-agarose constructs and pellets for 21 days in the presence of a defined medium containing transforming growth factor beta3 (TGF-beta3). The analysis of reverse transcription-polymerase chain reaction showed that hBM-MSCs of agarose and pellet cultures expressed the chondrogenic markers of collagen type II and aggrecan in the presence of TGF-beta3. The deposition of cartilage-specific macromolecules was detected in both agarose and pellet cultures by histological and immunohistochemical assessments. Chondrogenesis of hBM-MSCs in agarose gels directly correlated with the initial cell-seeding density, with the cell-agarose constructs of higher initial cell-seeding density exhibiting more cartilage-specific gene expressions. This study establishes a basic model for future studies on chondrogenesis of hBM-MSCs using the agarose cultures.

Thermally reversible polymer gel for chondrocyte culture

We have evaluated a biomaterial to serve as a scaffold for the propagation and amplification of chondrocytes that promotes the original cellular phenotype of these cells. The goal of the present study was to investigate the use of thermally reversible polymer gels poly(NiPAAm-co-AAc), as a biocompatible supporting scaffold for the propagation of chondrocytic cells. The polymer gels at temperatures above its lower critical solution temperature whereas liquefying at temperatures below its lower critical solution temperature of 34.5 degrees C. Hence, the polymer, in its gelled form, has the ability to hold cells in situ, forming a matrix similar to the natural cellular environment or the extracellular matrix that comprises cartilage. We tested the hypothesis that the polymer gel promotes cell viability and function. Human osteoblast-like cells, nasal chondrocytes, and articular chondrocytes (1 x 10(5)/150 microL) were resuspended in enriched Dulbecco's minimal essential media and were plated onto control (without gel) and gel containing 24-well plates. The plates were reincubated at 37 degrees C, 5% CO(2) for the time point of interest. Additional media was added to the plates and exchanged as needed. After cell culture, cells were retrieved, enumerated, and cell viability was determined. Other aliquots of the cells were stained for morphological analysis whereas expression of chondrocyte markers including collagen type II and aggrecan were determined using reverse transcriptase-polymerase chain reaction. The polymer gel was not cytotoxic because the cell number retrieved from three-dimensional culture gel was found to be one to two times higher than that retrieved from monolayer culture. Chondrocytes propagated in the thermo-reversible polymers expressed enhanced or maintained expression of collagen type II and aggrecan. Collagen type I expression was decreased or unaltered. The N-isopropylacrylamide and acrylic acid copolymer gel has potential use as a cell culture substrate and as a cell delivery vehicle.

Enzyme-catalyzed gel formation of gelatin and chitosan: potential for in situ applications

We compared the ability of two enzymes to catalyze the formation of gels from solutions of gelatin and chitosan. A microbial transglutaminase, currently under investigation for food applications, was observed to catalyze the formation of strong and permanent gels from gelatin solutions. Chitosan was not required for transglutaminase-catalyzed gel formation, although gel formation was faster, and the resulting gels were stronger if reactions were performed in the presence of this polysaccharide. Consistent with transglutaminase's ability to covalently crosslink proteins, we observed that the transglutaminase-catalyzed gelatin-chitosan gels lost the ability to undergo thermally reversible transitions (i.e. sol-gel transitions) characteristic of gelatin. Mushroom tyrosinase was also observed to catalyze gel formation for gelatin-chitosan blends. In contrast to transglutaminase, tyrosinase-catalyzed reactions did not lead to gel formation unless chitosan was present (i.e. chitosan is required for tyrosinase-catalyzed gel formation). Tyrosinase-catalyzed gelatin-chitosan gels were observed to be considerably weaker than transglutaminase-catalyzed gels. Tyrosinase-catalyzed gels were strengthened by cooling below gelatin's gel-point, which suggests that gelatin's ability to undergo a collagen-like coil-to-helix transition is unaffected by tyrosinase-catalyzed reactions. Further, tyrosinase-catalyzed gelatin-chitosan gels were transient as their strength (i.e. elastic modulus) peaked at about 5h after which the gels broke spontaneously over the course of 2 days. The strength of both transglutaminase-catalyzed and tyrosinase-catalyzed gels could be adjusted by altering the gelatin and chitosan compositions. Potential applications of these gels for in situ applications are discussed.

Multipotent stromal cells derived from the infrapatellar fat pad of the knee

Tissue engineering approaches for promoting the repair of skeletal tissues have focused on cell-based therapies involving multipotent stromal cells. Recent studies have identified such cells in several tissues in the adult human, including skin, muscle, bone marrow, and subcutaneous fat. This study examined the hypothesis that the infrapatellar fat pad of the adult knee contains progenitor cells that have the ability to differentiate into chondrocytes, osteoblasts, or adipocytes under appropriate culture conditions. Cells isolated from the fat pad stroma had a profile of cell-surface molecules similar but not identical to that of bone marrow-derived mesenchymal stem cells. Using defined culture conditions, fat pad-derived stromal cells were induced to differentiate cells with phenotypic characteristics of: (1) chondrocytes, synthesizing cartilage matrix molecules; (2) adipocytes, producing lipid vacuoles and leptin; or (3) osteoblasts, forming mineralized tissue. The culture conditions also modulated the expression of characteristic gene markers for each lineage. This study supports the hypothesis that multipotent stromal cells are present in many connective tissues in the adult human. Given its location and accessibility, the fat pad may prove to be a potential source of progenitor cells for musculoskeletal tissue engineering.

[Tissue engineering in urology. Basic principles and application]

Tissue engineering is a rather new field of science. Despite this fact, some experimental investigations have already been applied in clinical studies. Compared to other medical fields, tissue engineering in urology is well established. Tissue-engineered bulking agents and tissue-engineered bladder augments are being investigated in clinical trials. Even though the knowledge gained in recent years is promising, the results of cellular therapies need to be critically judged before being finally applied in patients. Genetic engineering and stem cell research (adult undifferentiated cells) have had major impact on the field of tissue engineering over the past 2 years. By using the technology of genetic engineering, biochemical and functional qualities of tissues may be modified. Adult stem cells may help to substitute lost tissue in an autologous fashion by isolating undifferentiated cells from the body and by differentiating them into a desired cell type. These cells may be used to form native functional tissue to replace a diseased organ or organ part.

Composition options for tissue-engineered bone

The logical assembly of tissue-engineered bone is ultimately directed by the clinical status of the patient. The basic elements for tissue-engineered bone should include signaling molecules, cells, and extracellular matrix. The assembly of these basic elements may need to be modified by tissue engineers to account for patient variables of age, gender, health, systemic conditions, habits, and anatomical implant. Moreover, different regions of the body will have different functional loads and vascularity. This review discusses several basic options that may be necessary to engineer bone, including spatial and temporal assembly of signaling factors, cells, and biomimetic extracellular matrices. Moreover, the importance of the health care status of the patient who may be receiving the tissue-engineered composition is emphasized.

Characterisation of reconstituted equine cartilage formed in vitro

Lesions in cartilage of equine weightbearing joints commonly result in lameness. Cell-based resurfacing techniques are currently being developed for human and veterinary applications. Biopsies of stifle joint cartilage (1 g) were harvested aseptically and chondrocytes were isolated by sequential enzyme digestion. The cells were grown in vitro on filter inserts. Analysis of cultures 8 weeks later showed that the cells had accumulated extracellular matrix and formed a continuous layer of cartilagenous tissue as determined histologically. The cells maintained their phenotype as they synthesised type II collagen and proteoglycans similar in size to those synthesised by chondrocytes in native cartilage, but this reconstituted tissue had more sulphated glycosaminoglycan and lower collagen content than native cartilage. This experiment tests the feasibility of growing equine cartilagenous tissue in vitro. This tissue may be useful in the management of chondral injuries in the horse in a scenario where the patient donates cells, the cells are propagated under laboratory conditions and the resulting tissue becomes the therapeutic agent.

Articular cartilage repair: basic science and clinical progress. A review of the current status and prospects

OBJECTIVE

To review the basic scientific status of repair in articular cartilage tissue and to assess the efficiency of current clinical therapies instigated for the treatment of structural lesions generated therein as a result of trauma or during the course of various diseases, notably osteoarthritis (OA). Current scientific trends and possible directions for the future will also be discussed.

DESIGN

A systematic and critical analysis is undertaken, beginning with a description of the spontaneous repair responses in different types of lesion. Surgical interventions aimed at inducing repair without the use of active biologics will then be considered, followed by those involving active biologics and those drawing on autogenic and allogeneic tissue transplantation principles. Cell transplantation approaches, in particular novel tissue engineering concepts, will be critically presented. These will include growth-factor-based biological treatments and gene transfection protocols. A number of technical problems associated with repair interventions, such as tissue integration, tissue retention and the role of mechanical factors, will also be analysed.

RESULTS

A critical analysis of the literature reveals the existence of many novel and very promising biologically-based approaches for the induction of articular cartilage repair, the vast majority of which are still at an experimental phase of development. But prospective, double-blinded clinical trials comparing currently practiced surgical treatments have, unfortunately, not been undertaken.

CONCLUSION

The existence of many new and encouraging biological approaches to cartilage repair justifies the future investment of time and money in this research area, particularly given the extremely high socio-economic importance of such therapeutic strategies in the prevention and treatment of these common joint diseases and traumas. Clinical epidemiological and prospective trials are, moreover, urgently needed for an objective, scientific appraisal of current therapies and future novel approaches.

Smooth muscle cell adhesion on crosslinked hyaluronan gels

Hyaluronic acid (HA)-based polymers (hylans) are highly biocompatible and can be structurally modified to obtain desired mechanical properties. This study evaluated divinyl sulfone-crosslinked solid and particulate hylans as cellular scaffolds. These two hylan types differ in surface characteristics, mode of preparation, HA content, and extent of crosslinking. Neonatal rat aortic smooth muscle cells were cultured on hylan gels coated with matrix factors including collagen I, ECM gel, laminin, and fibronectin and on uncoated controls for < or =4 weeks. Cell attachment was sparse on uncoated controls but significantly enhanced on coated gels. Cell morphology was influenced by the identity of the matrix factors coated and the surface topography of the hylan gels. Cells attached to coated particulate gels appeared either highly spread (collagen, fibronectin) or irregularly shaped (ECM gel, laminin). Cells on laminin and fibronectin-coated solid gels were rounded and nonproliferative. Cells proliferated most rapidly on ECM gel-coated gels. The uneven surface of particulate gels induced more protein deposition and the subsequent attachment and active proliferation of cells. This study shows that surface texturizing and subsequent surface treatment with matrix factors enhances cell attachment and proliferation of hylans. These results are useful toward developing bioengineered materials based on cell-hylan composites.

In vitro engineered cartilage constructs produced by press-coating biodegradable polymer with human mesenchymal stem cells

Cartilage constructs were fabricated by press-coating D,D-L,L-polylactic acid polymer blocks of 1 x 0.5 x 0.5 cm onto high-density cell pellets of 1.5 x 10(6) human mesenchymal stem cells (mhMSCs) isolated from the femoral head of patients undergoing total hip arthroplasty. Following attachment of the cell pellets to the polymer surfaces, chondrogenesis was induced by culturing the constructs for 3 weeks in a serum-free, chemically defined, chondrogenic differentiation medium supplemented with transforming growth factor beta-1 (TGF-beta1). Histochemical analysis showed that the press-coated pellets formed cell layers composed of morphologically distinct, chondrocyte-like cells, surrounded by a fibrous, sulfated proteoglycan-rich extracellular matrix. Immunohistochemical analysis detected collagen type II and cartilage proteoglycan link protein within the extracellular matrix. Expression of the cartilage-specific marker genes collagen types II, IX, X, and XI, and aggrecan was detected by RT-PCR. Scanning electron microscopy revealed organized and spatially distinct zones of cells within the cell-polymer constructs, with the superficial layer resembling compact hyaline cartilage. The fabrication method of press-coating biodegradable polymers with mhMSCs allows the in vitro production of cartilage constructs without harvesting chondrocytes from intact articular cartilage surfaces. These constructs may be applicable as prototypes for the reconstruction of articular cartilage defects in humans.

Polyamide 6 composite membranes: properties and in vitro biocompatibility evaluation

The aim of the present study was to develop polyamide 6 membrane blended with gelatin and chondroitin sulfate using the phase precipitation method and evaluate its in vitro biocompatibility. Morphology of membranes was studied by laser scanning confocal microscopy which allowed the nondestructive visualization of internal bulk morphology of membranes. Membranes exhibited porous morphology with pores spanning across the membrane width with interconnections at various depths. Membranes showed adequate mechanical properties with tensile strengths of 20.10 +/- 0.64 MPa, % strain of 3.01+/-0.07, and modulus of 1082.50+/-23.50 MPa. In vitro biocompatibility of membranes by direct contact test did not show degenerative effects on NIH3T3 cells and also its leach-out products (LOP), as determined by tetrazolium (MTT) and neutral red uptake (NRU) assay. Mouse peritoneal macrophage cultured in contact with membranes and PTFE control showed comparable expression of activation markers such as CD11b/CD18, CD45, CD14, and CD86 suggesting the membranes' non-activating nature. Membrane LOP did not induce excessive proliferation of mouse splenocytes suggesting its non-antigenic nature. Preliminary blood compatibility of membranes was observed with no detectable hemolysis in static incubation assay. Taken collectively, the present data demonstrate that polyamide 6 composite membranes are biocompatible and prospective candidates for tissue engineering applications.

Scaffold design and fabrication technologies for engineering tissues--state of the art and future perspectives

Today, tissue engineers are attempting to engineer virtually every human tissue. Potential tissue-engineered products include cartilage, bone, heart valves, nerves, muscle, bladder, liver, etc. Tissue engineering techniques generally require the use of a porous scaffold, which serves as a three-dimensional template for initial cell attachment and subsequent tissue formation both in vitro and in vivo. The scaffold provides the necessary support for cells to attach, proliferate, and maintain their differentiated function. Its architecture defines the ultimate shape of the new grown soft or hard tissue. In the early days of tissue engineering, clinically established materials such as collagen and polyglycolide were primarily considered as the material of choice for scaffolds. The challenge for more advanced scaffold systems is to arrange cells/tissue in an appropriate 3D configuration and present molecular signals in an appropriate spatial and temporal fashion so that the individual cells will grow and form the desired tissue structures--and do so in a way that can be carried out reproducibly, economically, and on a large scale. This paper is not intended to provide a general review of tissue engineering, but specifically concentrate on the design and processing of synthetic polymeric scaffolds. The material properties and design requirements are discussed. An overview of the various fabrication techniques of scaffolds is presented, beginning with the basic and conventional techniques to the more recent, novel methods that combine both scaffold design and fabrication capabilities.

Use of cultivated osteoprogenitor cells to increase bone formation in segmental mandibular defects: an experimental pilot study in sheep

The hypothesis of the present experimental pilot study was that autogeneous cultivated osteoprogenitor cells in porous calcium phosphate scaffolds can increase bone formation in segmental defects of the mandible. The autogenous osteoprogenitor cells of eight sheep were cultivated from bone biopsies from the iliac crest and seeded into cylindrical scaffolds of pyrolized bovine bone of an overall length of 35 mm and 13 mm in diameter. Segmental defects of 35 mm length were created unilaterally in the mandibles of the animals. Reconstruction was performed using cylinders with cultivated osteoprogenitor cells in four animals and empty scaffolds in the remaining four sheep, which served as controls. After 5 months, the mandibles were retrieved and the reconstructed areas were analyzed by qualitative and quantitative histology in serial undecalcified thick-section specimens. There was significantly more bone formation in the group that had received scaffolds with cultivated bone cells (P=0.028). Bone formation was present in 34.4% of the evaluated cross-sectional units in the seeded scaffolds, while it was found in 10.4% in the control group. Although the spatial distribution of bone formation was significantly different across the scaffold in both groups, osteoprogenitor cells appeared to have increased bone formation, particularly in the centre of the defect when compared to the control group. It is concluded that the repair of segmental defects of the mandible can be enhanced by the transplantation of autogenous osteoprogenitor cells in a porous calcium phosphate scaffold.

Sodium alginate sponges with or without sodium hyaluronate: in vitro engineering of cartilage

Studies are underway to design biosystems containing embedded chondrocytes to fill osteochondral defects and to produce a tissue close to native cartilage. In the present report, a new alginate three-dimensional support for chondrocyte culture is described. A sodium alginate solution, with or without hyaluronic acid (HA), was freeze-dried to obtain large-porosity sponges. This formulation was compared with a hydrogel of the same composition. In the sponge formulation, macroscopic and microscopic studies demonstrated the formation of a macroporous network (average pore size, 174 microm) associated with a microporous one (average pore size, 250 nm). Histological and biochemical studies showed that, when loaded with HA, the sponge provides an adapted environment for proteoglycan and collagen synthesis by chondrocytes. Cytoskeleton organization was studied by three-dimensional fluorescence microscopy (CellScan EPR). Chondrocytes exhibit a marked spherical shape with a nonoriented and sparse actin microfilament network. Type II collagen was detected in both types of sponges (with or without HA) using immunohistochemistry. In conclusion, the sponge formulation affords new perspectives with respect to the in vitro production of "artificial" cartilage. Furthermore, the presence of hyaluronate within the alginate sponge mimics a functional environment, suitable for the production by embedded chondrocytes of an extracellular matrix.