Endothelial shear stress in the evolution of coronary atherosclerotic plaque and vascular remodelling: current understanding and remaining questions

Assessment of surface roughness and blood rheology on local coronary haemodynamics: a multi-scale computational fluid dynamics study

The surface roughness of the coronary artery is associated with the onset of atherosclerosis. The study applies, for the first time, the micro-scale variation of the artery surface to a 3D coronary model, investigating the impact on haemodynamic parameters which are indicators for atherosclerosis. The surface roughness of porcine coronary arteries have been detailed based on optical microscopy and implemented into a cylindrical section of coronary artery. Several approaches to rheology are compared to determine the benefits/limitations of both single and multiphase models for multi-scale geometry. Haemodynamic parameters averaged over the rough/smooth sections are similar; however, the rough surface experiences a much wider range, with maximum wall shear stress greater than 6 Pa compared to the approximately 3 Pa on the smooth segment. This suggests the smooth-walled assumption may neglect important near-wall haemodynamics. While rheological models lack sufficient definition to truly encompass the micro-scale effects occurring over the rough surface, single-phase models (Newtonian and non-Newtonian) provide numerically stable and comparable results to other coronary simulations. Multiphase models allow for phase interactions between plasma and red blood cells which is more suited to such multi-scale models. These models require additional physical laws to govern advection/aggregation of particulates in the near-wall region.

Does the inflow velocity profile influence physiologically relevant flow patterns in computational hemodynamic models of left anterior descending coronary artery?

Patient-specific computational fluid dynamics is a powerful tool for investigating the hemodynamic risk in coronary arteries. Proper setting of flow boundary conditions in computational hemodynamic models of coronary arteries is one of the sources of uncertainty weakening the findings of in silico experiments, in consequence of the challenging task of obtaining in vivo 3D flow measurements within the clinical framework. Accordingly, in this study we evaluated the influence of assumptions on inflow velocity profile shape on coronary artery hemodynamics. To do that, (1) ten left anterior descending coronary artery (LAD) geometries were reconstructed from clinical angiography, and (2) eleven velocity profiles with realistic 3D features such as eccentricity and differently shaped (single- and double-vortex) secondary flows were generated analytically and imposed as inflow boundary conditions. Wall shear stress and helicity-based descriptors obtained prescribing the commonly used parabolic velocity profile were compared with those obtained with the other velocity profiles. Our findings indicated that the imposition of idealized velocity profiles as inflow boundary condition is acceptable as long the results of the proximal vessel segment are not considered, in LAD coronary arteries. As a pragmatic rule of thumb, a conservative estimation of the length of influence of the shape of the inflow velocity profile on LAD local hemodynamics can be given by the theoretical entrance length for cylindrical conduits in laminar flow conditions.

Exploring the relationship between biomechanical stresses and coronary atherosclerosis

The pathophysiology of coronary atherosclerosis is multifaceted. Plaque initiation and progression are governed by a complex interplay between genetic and environmental factors acting through processes such as lipid accumulation, altered haemodynamics and inflammation. There is increasing recognition that biomechanical stresses play an important role in atherogenesis, and integration of these metrics with clinical imaging has potential to significantly improve cardiovascular risk prediction. In this review, we present the calculation of coronary biomechanical stresses from first principles and computational methods, including endothelial shear stress (ESS), plaque structural stress (PSS) and axial plaque stress (APS). We discuss the current experimental and human data linking these stresses to the natural history of coronary artery disease and explore the future potential for refining treatment options and predicting future ischaemic events.

Kefir peptides alleviate high-fat diet-induced atherosclerosis by attenuating macrophage accumulation and oxidative stress in ApoE knockout mice

In the past decade, the high morbidity and mortality of atherosclerotic disease have been prevalent worldwide. High-fat food consumption has been suggested to be an overarching factor for atherosclerosis incidence. This study aims to investigate the effects of kefir peptides on high-fat diet (HFD)-induced atherosclerosis in apolipoprotein E knockout (ApoE^−/−) mice. 7-week old male ApoE^−/− and normal C57BL/6 mice were randomly divided into five groups (n = 8). Atherosclerotic lesion development in ApoE^−/− mice was established after fed the HFD for 12 weeks compared to standard chow diet (SCD)-fed C57BL/6 and ApoE^−/− control groups. Kefir peptides oral administration significantly improved atherosclerotic lesion development by protecting against endothelial dysfunction, decreasing oxidative stress, reducing aortic lipid deposition, attenuating macrophage accumulation, and suppressing the inflammatory immune response compared with the HFD/ApoE^−/− mock group. Moreover, the high dose of kefir peptides substantially inhibited aortic fibrosis and restored the fibrosis in the aorta root close to that observed in the C57BL/6 normal control group. Our findings show, for the first time, anti-atherosclerotic progression via kefir peptides consumption in HFD-fed ApoE^−/− mice. The profitable effects of kefir peptides provide new perspectives for its use as an anti-atherosclerotic agent in the preventive medicine.

Exploring wall shear stress spatiotemporal heterogeneity in coronary arteries combining correlation-based analysis and complex networks with computational hemodynamics

Atherosclerosis at the early stage in coronary arteries has been associated with low cycle-average wall shear stress magnitude. However, parallel to the identification of an established active role for low wall shear stress in the onset/progression of the atherosclerotic disease, a weak association between lesions localization and low/oscillatory wall shear stress has been observed. In the attempt to fully identify the wall shear stress phenotype triggering early atherosclerosis in coronary arteries, this exploratory study aims at enriching the characterization of wall shear stress emerging features combining correlation-based analysis and complex networks theory with computational hemodynamics. The final goal is the characterization of the spatiotemporal and topological heterogeneity of wall shear stress waveforms along the cardiac cycle. In detail, here time-histories of wall shear stress magnitude and wall shear stress projection along the main flow direction and orthogonal to it (a measure of wall shear stress multidirectionality) are analyzed in a representative dataset of 10 left anterior descending pig coronary artery computational hemodynamics models. Among the main findings, we report that the proposed analysis quantitatively demonstrates that the model-specific inlet flow-rate shapes wall shear stress time-histories. Moreover, it emerges that a combined effect of low wall shear stress magnitude and of the shape of the wall shear stress–based descriptors time-histories could trigger atherosclerosis at its earliest stage. The findings of this work suggest for new experiments to provide a clearer determination of the wall shear stress phenotype which is at the basis of the so-called arterial hemodynamic risk hypothesis in coronary arteries.

The value of quantified plaque analysis by dual-source coronary CT angiography to detect vulnerable plaques: a comparison study with intravascular ultrasound

Background

To investigate the diagnostic performance of quantified plaque analysis and high-risk plaque characterization by coronary computed tomography angiography (CCTA) for identifying thin-cap fibroatheroma (TCFA).

Methods

Patients who underwent both CCTA and intravascular ultrasound (IVUS) within 4 weeks were retrospectively included. CT-derived quantitative and qualitative parameters, including diameter stenosis, minimal lumen area (MLA), low attenuation plaque (LAP) volume napkin-ring sign (NRS), positive remodeling (PR) and spotty calcification, were recorded. TCFA lesions and non-TCFA lesions were determined by IVUS. Multivariate regression analysis was used to determine the independent predictors of TCFA lesions.

Results

Sixty-five patients (mean age: 69.8±9.2 years, 29 females) with 89 lesions were finally included. LAP and NRS were more frequently presented in the group of TCFA lesions. The mean LAP volume of TCFA lesions was significantly larger than that of non-TCFA lesions [16.5 (11.0-23.0) vs. 0 (0-1.5) mm³, P<0.001]. According to multivariate logistic regression analysis, LAP volume was the only significant predictor for IVUS-confirmed vulnerable plaques (odds ratio =3.294, 95% confidence interval: 1.177-9.223, P=0.023). LAP volume showed largest area under curve (AUC) for diagnosing TCFA lesions (AUC =0.901, 95% confidence interval: 0.819-0.954, P<0.0001). When using >8 mm³ as the best cutoff value, the diagnostic accuracy, sensitivity and specificity of LAP volume for predicting TCFA lesions were 91.0% (81/89), 84.6% (22/26) and 96.8% (61/63) respectively.

Conclusions

CT-derived LAP volume of TCFA lesions was significantly higher than those of non-TCFA lesions. LAP volume was the strongest predictor for TCFA lesions as validated by IVUS.

The impact of helical flow on coronary atherosclerotic plaque development

BACKGROUND AND AIMS

Atherosclerosis has been associated with near-wall hemodynamics and wall shear stress (WSS). However, the role of coronary intravascular hemodynamics, in particular of the helical flow (HF) patterns that physiologically develop in those arteries, is rarely considered. The purpose of this study was to assess how HF affects coronary plaque initiation and progression, definitively demonstrating its atheroprotective nature.

METHODS

The three main coronary arteries of five adult hypercholesterolemic mini-pigs on a high fat diet were imaged by computed coronary tomography angiography (CCTA) and intravascular ultrasound (IVUS) at 3 (T1, baseline) and 9.4 ± 1.9 (T2) months follow-up. The baseline geometries of imaged coronary arteries (n = 15) were reconstructed, and combined with pig-specific boundary conditions (based on in vivo Doppler blood flow measurements) to perform computational fluid dynamic simulations. Local wall thickness (WT) was measured on IVUS images at T1 and T2, and its temporal changes were assessed. Descriptors of HF and WSS nature were computed for each model, and statistically compared to WT data.

RESULTS

HF intensity was strongly positively associated with WSS magnitude (p < 0.001). Overall, coronary segments exposed to high baseline levels of HF intensity exhibited a significantly lower WT growth (p < 0.05), compared to regions with either mid or low HF intensity.

CONCLUSIONS

This study confirms the physiological significance of HF in coronary arteries, revealing its protective role against atherosclerotic WT growth and its potential in predicting regions undergoing WT development. These findings support future in vivo measurement of coronary HF as atherosclerotic risk marker, overcoming current limitations of in vivo WSS assessment.

Three-Dimensional Imaging Provides Detailed Atherosclerotic Plaque Morphology and Reveals Angiogenesis After Carotid Artery Ligation

RATIONALE

Remodeling of the vessel wall and the formation of vascular networks are dynamic processes that occur during mammalian embryonic development and in adulthood. Plaque development and excessive neointima formation are hallmarks of atherosclerosis and vascular injury. As our understanding of these complex processes evolves, there is a need to develop new imaging techniques to study underlying mechanisms.

OBJECTIVE

We used tissue clearing and light-sheet microscopy for 3-dimensional (3D) profiling of the vascular response to carotid artery ligation and induction of atherosclerosis in mouse models.

METHODS AND RESULTS

Adipo-Clear and immunolabeling in combination with light-sheet microscopy were applied to image carotid arteries and brachiocephalic arteries, allowing for 3D reconstruction of vessel architecture. Entire 3D neointima formations with different geometries were observed within the carotid artery and scored by volumetric analysis. Additionally, we identified a CD31-positive adventitial plexus after ligation of the carotid artery that evolved and matured over time. We also used this method to characterize plaque extent and composition in the brachiocephalic arteries of ApoE-deficient mice on high-fat diet. The plaques exhibited inter-animal differences in terms of plaque volume, geometry, and ratio of acellular core to plaque volume. A 3D reconstruction of the endothelium overlying the plaque was also generated.

CONCLUSIONS

We present a novel approach to characterize vascular remodeling in adult mice using Adipo-Clear in combination with light-sheet microscopy. Our method reconstructs 3D neointima formation after arterial injury and allows for volumetric analysis of remodeling, in addition to revealing angiogenesis and maturation of a plexus surrounding the carotid artery. This method generates complete 3D reconstructions of atherosclerotic plaques and uncovers their volume, geometry, acellular component, surface, and spatial position within the brachiocephalic arteries. Our approach may be used in a number of mouse models of cardiovascular disease to assess vessel geometry and volume. Visual Overview: An online visual overview is available for this article.

Evaluating medical device and material thrombosis under flow: current and emerging technologies

This review highlights the importance of flow in medical device thrombosis and explores current and emerging technologies to evaluate dynamic biomaterial Thrombosis in vitro.

Fiber Scaffold Patterning for Mending Hearts: 3D Organization Bringing the Next Step

Heart failure (HF) is a leading cause of death worldwide. The most common conditions that lead to HF are coronary artery disease, myocardial infarction, valve disorders, high blood pressure, and cardiomyopathy. Due to the limited regenerative capacity of the heart, the only curative therapy currently available is heart transplantation. Therefore, there is a great need for the development of novel regenerative strategies to repair the injured myocardium, replace damaged valves, and treat occluded coronary arteries. Recent advances in manufacturing technologies have resulted in the precise fabrication of 3D fiber scaffolds with high architectural control that can support and guide new tissue growth, opening exciting new avenues for repair of the human heart. This review discusses the recent advancements in the novel research field of fiber patterning manufacturing technologies for cardiac tissue engineering (cTE) and to what extent these technologies could meet the requirements of the highly organized and structured cardiac tissues. Additionally, future directions of these novel fiber patterning technologies, designs, and applicability to advance cTE are presented.

Noninvasive Functional Characterization of Coronary Plaques by Coronary Computed Tomography – Beyond the Morphology of Vulnerable Plaques

Coronary computed tomography angiography (CCTA) is a reliable screening method of patients with coronary artery disease (CAD). CCTA is capable to assess both coronary stenosis and plaque morphology, but does not provide hemodynamic characterization of the coronary lesions. However, the severity of coronary stenosis does not always reflect the hemodynamic significance of the plaque. Invasive fractional flow reserve (FFR) is considered the gold standard for the functional evaluation of a potential ischemia-causing stenosis. FFR derived from CCTA (FFR-CT) is a new noninvasive diagnostic tool, using a typically acquired CCTA, without the need for any further radiation or medication. Additional functional assessment of the coronary lesions permits a more complex characterization of CAD patients. Based on the FFR-CT examination, patients who need invasive coronary intervention can be selected more precisely, and a more personalized and optimized treatment can be provided.

Computational Fluid Dynamics Analysis to Predict Endothelial Cells Migration During Flow Exposure Experiment With Placement of Two Stent Wires

Stent deployment is currently used for many cardiovascular treatments. During its application, the presence of the stent inside the blood vessel will indeed cause some change in both flow environment and also vessel wall's cellular conditions. This research intends to learn about the flow phenomenon of how vessel wall endothelial cells (ECs) react to the presence of stent wires within a microfluidic flow chamber environment. Computational fluid dynamics (CFD) simulation analysis of the microfluidic flow chamber system has been performed for observing the hemodynamics phenomena in the chamber. Moreover, CFD method also can be beneficial as a planning step for a successful experimental study. We found that under the two wires configurations, high wall shear stress (WSS) area is developed on the downstream side of the wires. Based on the analysis of WSS and WSS gradients (WSSG) conditions, ECs morphological change and migration are likely to occur some specific area.

Correlating Carotid Intima-Media Thickness With Lipid Profile: Does It Improve Sonographic Diagnosis of Subclinical Atherosclerosis?

Objective. The purpose of this prospective study was to ascertain if lipid profile parameters could serve as predictors of carotid intima-media thickness (CIMT), which, when combined, may improve the sensitivity of sonographic CIMT measurement in the diagnosis of subclinical atherosclerotic changes. Methods. The lipid profiles and CIMT of 181 subjects without cardiovascular risk factors were measured at the internal, external, common, and bulbar segments. Results. The mean CIMT values obtained were 0.620 ± 0.055 cm for men and 0.575 ± 0.051 cm for women, and the η2 values (η2 < 0.04) were used as a measure of association. Across all segments of both carotid arteries, lipid profiles were significantly and moderately associated with but not predictive of CIMT (fasting blood sugar, total cholesterol, and low-density lipoprotein: η2 = 0.99–0.24). Conclusions. Although lipid profiles were moderately associated with CIMT, they are not significant predictors; hence, combining them with CIMT does not improve the diagnostic sensitivity of sonography in atherosclerosis screening.

The Presence of a High Peak Feature Within Low-Average Shear Stimuli Induces Quiescence in Venous Endothelial Cells

Wall shear stress (WSS) is an important stimulus in vascular remodelling and vascular lesion development. The current methods to assess and predict the risk associated with specific unsteady WSS consider the WSS mean values or the presence of reverse phases described by the oscillatory shear index. Recent evidence has shown that the accuracy of these methods is limited, especially with respect to the venous environment. Unsteady WSS are characterised by several features that may individually affect endothelial cells. Consequently, we assessed the effects of averaged WSS (TAWSS), temporal WSS gradient (TWSSG), maximum WSS (WSS peak) and reverse phase (OSI) by applying different WSS profiles to venous EC in-vitro, using a real-time controlled cone-and-plate cell-shearing device for 24 h. We found that TWSSG and WSS peak affect cell elongation and alignment respectively. We also found that the WSS waveforms with a peak of 1.5 Pa or higher significantly correlate with the induction of a protective phenotype. Cell phenotype induced by these high peak waveforms does not correlate to what is predicted by the hemodynamic indices currently used. The definition of reliable hemodynamic indices can be used to inform the computational models aimed at estimating the hemodynamic effects on vascular remodelling.

Shear-Dependent Platelet Aggregation: Mechanisms and Therapeutic Opportunities

Cardiovascular diseases (CVD) are the number one cause of morbidity and death worldwide. As estimated by the WHO, the global death rate from CVD is 31% wherein, a staggering 85% results from stroke and myocardial infarction. Platelets, one of the key components of thrombi, have been well-investigated over decades for their pivotal role in thrombus development in healthy as well as diseased blood vessels. In hemostasis, when a vascular injury occurs, circulating platelets are arrested at the site of damage, where they are activated and aggregate to form hemostatic thrombi, thus preventing further bleeding. However, in thrombosis, pathological activation of platelets occurs, leading to uncontrolled growth of a thrombus, which in turn can occlude the blood vessel or embolize, causing downstream ischemic events. The molecular processes causing pathological thrombus development are in large similar to the processes controlling physiological thrombus formation. The biggest challenge of anti-thrombotics and anti-platelet therapeutics has been to decouple the pathological platelet response from the physiological one. Currently, marketed anti-platelet drugs are associated with major bleeding complications for this exact reason; they are not effective in targeting pathological thrombi without interfering with normal hemostasis. Recent studies have emphasized the importance of shear forces generated from blood flow, that primarily drive platelet activation and aggregation in thrombosis. Local shear stresses in obstructed blood vessels can be higher by up to two orders of magnitude as compared to healthy vessels. Leveraging abnormal shear forces in the thrombus microenvironment may allow to differentiate between thrombosis and hemostasis and develop shear-selective anti-platelet therapies. In this review, we discuss the influence of shear forces on thrombosis and the underlying mechanisms of shear-induced platelet activation. Later, we summarize the therapeutic approaches to target shear-sensitive platelet activation and pathological thrombus growth, with a particular focus on the shear-sensitive protein von Willebrand Factor (VWF). Inhibition of shear-specific platelet aggregation and targeted drug delivery may prove to be much safer and efficacious approaches over current state-of-the-art antithrombotic drugs in the treatment of cardiovascular diseases.

Long-term hemodynamic mechanism of enhanced external counterpulsation in the treatment of coronary heart disease: a geometric multiscale simulation

Enhanced external counterpulsation (EECP) is a noninvasive treatment method for coronary artery atherosclerosis that acts on the vascular endothelial cells. The intracoronary hemodynamic parameters that influence long-term treatment effect are the fundamental factors for the inhibition of intimal hyperplasia, which cannot be measured in real time. In order to optimize the long-term treatment effect of coronary heart disease, it is necessary to establish a method for quantified calculation of intracoronary hemodynamic parameters during counterpulsation to research the long-term hemodynamic mechanism of EECP. A geometric multiscale model coupled by the zero-dimensional (0D) lumped parameter model and the three-dimensional (3D) model of narrow coronary artery was established for the simulation of intracoronary hemodynamic environment. The 3D model was used to calculate the hemodynamic parameters such as wall shear stress (WSS) and oscillatory shear index (OSI), while the 0D model was used to simulate the blood circulatory system. Sequential pressure was applied to calves, thighs, and buttocks module in 0D model with the consideration of vessel collapse. Hemodynamic performance was compared with clinical reports to verify the effectiveness of the method. There were significant increases of the diastolic blood pressure (DBP), coronary flow, and the area-averaged WSS during application of EECP, while OSI behind stenosis has some decrease. The waveforms of coronary flow has good similarity with the clinical measured waveforms, and the differences between calculated mean arterial pressures (MAPs) and clinical measurements were within 1%. The fundamental factor in the cure of coronary heart disease by EECP is the improvement of WSS and the decrease of OSI. Comparing with the clinical reports, the immediate hemodynamic changes demonstrate the effectiveness of model. Intracoronary hemodynamic parameters during EECP could be acquired and the method could be used to simulate the long-term treatment effect of EECP. Graphical abstract.

Hemodynamic effects of enhanced external counterpulsation on cerebral arteries: a multiscale study

Background

Enhanced external counterpulsation (EECP) is an effective method for treating patients with cerebral ischemic stroke, while hemodynamics is the major contributing factor in the treatment of EECP. Different counterpulsation modes have the potential to lead to different acute and long-term hemodynamic changes, resulting in different treatment effects. However, various questions about appropriate counterpulsation modes for optimizing hemodynamic effects remain unanswered in clinical treatment.

Methods

A zero-dimensional/three-dimensional (0D/3D) geometric multiscale model of the cerebral artery was established to obtain acute hemodynamic indicators, including mean arterial pressure (MAP) and cerebral blood flow (CBF), as well as localized hemodynamic details for the cerebral artery, which includes wall shear stress (WSS) and oscillatory shear index (OSI). Counterpulsation was achieved by applying pressure on calf, thigh and buttock modules in the 0D model. Different counterpulsation modes including various pressure amplitudes and pressurization durations were applied to investigate hemodynamic responses, which impact acute and long-term treatment effects. Both vascular collapse and cerebral autoregulation were considered during counterpulsation.

Results

Variations of pressure amplitude and pressurization duration have different impacts on hemodynamic effects during EECP treatment. There were small differences in the hemodynamics when similar or different pressure amplitudes were applied to calves, thighs and buttocks. When increasing pressure amplitude was applied to the three body parts, MAP and CBF improved slightly. When pressure amplitude exceeded 200 mmHg, hemodynamic indicators almost never changed, demonstrating consistency with clinical data. However, hemodynamic indicators improved significantly with increasing pressurization duration. For pressurization durations of 0.5, 0.6 and 0.7 s, percentage increases for MAP during counterpulsation were 1.5%, 23.5% and 39.0%, for CBF were 1.2%, 23.4% and 41.6% and for time-averaged WSS were 0.2%, 43.5% and 85.0%, respectively.

Conclusions

When EECP was applied to patients with cerebral ischemic stroke, pressure amplitude applied to the three parts may remain the same. Patients may not gain much more benefit from EECP treatment by excessively increasing pressure amplitude above 200 mmHg. However, during clinical procedures, pressurization duration could be increased to 0.7 s during the cardiac circle to optimize the hemodynamics for possible superior treatment outcomes.

A Spatially Resolved and Quantitative Model of Early Atherosclerosis

Atherosclerosis is a major burden for all societies, and there is a great need for a deeper understanding of involved key inflammatory, immunological and biomechanical processes. A decisive step for the prevention and medical treatment of atherosclerosis is to predict what conditions determine whether early atherosclerotic plaques continue to grow, stagnate or become regressive. The driving biological and mechanobiological mechanisms that determine the stability of plaques are yet not fully understood. We develop a spatially resolved and quantitative mathematical model of key contributors of early atherosclerosis. The stability of atherosclerotic model plaques is assessed to identify and classify progression-prone and progression-resistant atherosclerotic regions based on measurable or computable in vivo inputs, such as blood cholesterol concentrations and wall shear stresses. The model combines Darcy's law for the transmural flow through vessels walls, the Kedem-Katchalsky equations for endothelial fluxes of lipoproteins, a quantitative model of early plaque formation from a recent publication and a novel submodel for macrophage recruitment. The parameterization and analysis of the model suggest that the advective flux of lipoproteins through the endothelium is decisive, while the influence of the advective transport within the artery wall is negligible. Further, regions in arteries with an approximate wall shear stress exposure below 20% of the average exposure and their surroundings are potential regions where progression-prone atherosclerotic plaques develop.

Coronary Shear Stress after Implantation of Bioresorbable Scaffolds – a Modern Interdisciplinary Concept at the Border between Interventional Cardiology and Cardiac Imaging

Bioresorbable scaffolds/stents offer new and exciting perspectives in the treatment of patients with acute coronary syndromes, especially after the recent development of invasive imaging techniques, such as optical coherence tomography, which allow complete assessment of vascu-lar segments. A particular advantage of bioresorbable scaffolds is that once the biosorption of the scaffold is complete, the vascular segment regains its normal physiological functions, thus eliminating the risk of late complications. New studies show the importance of shear stress in the progression of vascular atherosclerosis or in accelerating endothelial turnover. Based on the current knowledge in this field, a future standardized determination of shear stress may help in the long-term follow-up of patients that have suffered or are at risk of developing an acute coronary syndrome.

Added value of aortic pulse wave velocity index for the detection of coronary heart disease by elective coronary angiography

Background: Non-invasive tests leading to elective coronary angiography (CAG) have low diagnostic yield for obstructive coronary heart disease (CHD). Aortic stiffness, an independent predictor of CHD events can be easily measured by pulse wave velocity (PWV). We aimed at retrospectively evaluating the diagnostic accuracy PWV index to detect CHD in consecutive patients with suspected CHD that underwent CAG.Method: In population of 86 healthy patients with available PWV data, a theoretical PWV was derived. In different population of 62 individuals who underwent CAG for suspected CHD, PWV index was calculated as index [(measured PWV - theoretical PWV)/theoretical PWV]. Logistic regression and comparisons between ROC curves were used to add value of CAG indication performance of PWV index.Results: Out of 62, seventeen patients presented obstructive CHD and 22 patients had non-obstructive CHD. PWV index and severity of CHD were positively correlated (p < 0.0001). After applying several models that included classical CHD predictor, the higher performance to detect abnormal CAG was obtained with the combined classifier PWV index/carotid plaque with 87% sensitivity, 93% specificity, 0.92 accuracy and 0.31 threshold. To detect obstructive CAG, individual classifier PWV index presents 94% sensitivity, 91% specificity, 0.95 accuracy and 0.46 threshold.Conclusion: PWV index is individualized approach that optimizes CHD diagnostic strategies and thus might be clinically useful for reducing the rate of unnecessary invasive CAG.

Influence of coupled hemodynamics-arterial wall interaction on compliance in a realistic pulmonary artery with variable intravascular wall properties

Pulmonary hypertension is characterized by elevation of pulmonary artery (PA) pressure (p) and structural remodeling of the PA wall, leading to reduction in arterial compliance (c). As a step towards improving diagnosis of pulmonary disease, we use the PA branch geometry (main pulmonary artery (MPA) branching into left (LPA) and right (RPA) pulmonary arteries) obtained from MRI in conjunction with an inverse algorithm to obtain the pre-stress level in the artery walls. Next, a coupled blood-wall interaction (BWI) calculation provides hemodynamic information as well as compliance of the PA walls. We show that the computed load-free geometry from the inverse algorithm exhibits a 27.8% lower inner diameter (d) and 18.5% lower outer d compared to the in vivo geometry from MRI. Further, the mean p computed from the BWI computation in the main PA (p_MPA-n) is within 4% of the mean p_MPA-e (n-numerical; e-experimental). Also, the mean Q computed in the left PA (Q_LPA-n) is within 10% of the mean Q_LPA-e. Finally, the compliance c_MPA-n is computed to be 27% lower than c_MPA-e, while the c_LPA-n is computed to be 20.4% lower than c_LPA-e. Importantly, the PA shows significant intra-vascular variation in compliance, with the MPA showing higher overall compliance compared to the LPA (3.5-4 times).

In Vivo Blood Velocity Vector Imaging Using Adaptive Velocity Compounding in the Carotid Artery Bifurcation

Visualization and quantification of blood flow are considered important for early detection of atherosclerosis and patient-specific diagnosis and intervention. As conventional Doppler imaging is limited to 1-D velocity estimates, 2-D and 3-D techniques are being developed. We introduce an adaptive velocity compounding technique that estimates the 2-D velocity vector field using predominantly axial displacements estimated by speckle tracking from dual-angle plane wave acquisitions. Straight-vessel experiments with a 7.8-MHz linear array transducer connected to a Verasonics Vantage ultrasound system revealed that the technique performed with a maximum velocity magnitude bias and angle bias of -3.7% (2.8% standard deviation) and -0.16° (0.41° standard deviation), respectively. In vivo, complex flow patterns were visualized in two healthy and three diseased carotid arteries and quantified using a vector complexity measure that increased with increasing wall irregularity. This measure could potentially be a relevant clinical parameter which might aid in early detection of atherosclerosis.

Three-Dimensional Subharmonic Aided Pressure Estimation for Assessing Arterial Plaques in a Rabbit Model

OBJECTIVES

To investigate 3-dimensional subharmonic aided pressure estimation (SHAPE) for measuring intraplaque pressure and the pressure gradient across the plaque cap as novel biomarkers for potentially predicting plaque vulnerability.

METHODS

Twenty-seven rabbits received a high-cholesterol diet for 2 weeks before a balloon catheter injury to denude the endothelium of the aorta, followed by 8 to 10 weeks of the high-cholesterol diet to create arteriosclerotic plaques. SHAPE imagings of the resulting plaques were performed 12, 16, and 20 weeks after injury using a LOGIQ 9 scanner with a 4D10L probe (GE Healthcare, Milwaukee, WI) before and during an infusion of Definity (Lantheus Medical Imaging, North Billerica, MA) and Sonazoid (GE Healthcare, Oslo, Norway). The ratios of the maximum subharmonic magnitudes at baseline and during the infusion were correlated with the intraplaque pressure and pressure gradient across the plaque cap obtained from direct measurements.

RESULTS

Ten rabbits died prematurely after the balloon injury procedure or due to toxicity from the high-cholesterol diet, whereas 2 rabbits were excluded for other conditions. Five rabbits were scanned in the 12-, 16-, and 20-week groups, respectively. Even after 20 weeks, the plaques that developed were very small (mean ± SD, 0.9 ± 0.4 × 0.14 ± 0.05 cm). Definity performed better than Sonazoid in this application but still only achieved a moderate correlation with pressure across the plaque cap (Definity, r = -0.40; Sonazoid, r = 0.22) and intraplaque pressure (Definity, r = -0.19; Sonazoid, r = -0.11).

CONCLUSIONS

Initial findings from plaque pressure estimation using 3-dimensional SHAPE technique showed only moderate correlations with reference standards, but that may be have been due to weaknesses in the animal model studied.

Haemodynamic impacts of myocardial bridge length: A congenital heart disease

OBJECTIVES

There is an association between long and thick myocardial bridging (MB), haemodynamic perturbations and increased risk of myocardial infarction. This study aims to investigate the alteration in coronary haemodynamics with increasing the length of MB.

METHODS

Angiography and intravascular ultrasound were performed in 10 patients with varying length of MB in the left anterior descending (LAD) artery. In silico models of MB were developed based on the reconstructed three-dimensional model of the LAD. The entire LAD was divided into 3 segments, proximal (pre-bridge), bridge and distal (post-bridge). Transient computational fluid dynamics simulations were performed to derive distribution of blood residence time and wall shear stress (WSS) over entire vessel including proximal, bridge and distal segments.

RESULTS

With increasing the length of MB, a decreasing trend was observed in the WSS over proximal segment whereas an increasing trend was found in the WSS over bridge segment. When patients were divided into 2 groups based on the average length of MB in the whole cohort (L_ave = 23.92 mm), patients with bridges longer than L_ave had smaller WSS and higher residence time in the proximal segment compared to those with bridges shorter than L_ave (0.59 ± 0.31 vs 0.21 ± 0.14 Pa and 0.0021 ± 0.0015 vs 0.0045 ± 0.0021 s). In contrast, patients with bridges longer than L_ave had greater WSS in the bridge segment compared to those with bridges shorter than L_ave (1.37 ± 1.66 vs 2.53 ± 3.14 Pa). No significant difference was found in the distal WSS of patients with short and long bridges.

CONCLUSION

Our findings revealed a direct relationship between the length of MB and haemodynamic perturbations in the proximal segment such that the increased length of MB is associated with decreased WSS and increased residence time.

The importance of side branches in modeling 3D hemodynamics from angiograms for patients with coronary artery disease

Genesis of atherosclerotic lesions in the human arterial system is critically influenced by the fluid mechanics. Applying computational fluid dynamic tools based on accurate coronary physiology derived from conventional biplane angiogram data may be useful in guiding percutaneous coronary interventions. The primary objective of this study is to build and validate a computational framework for accurate personalized 3-dimensional hemodynamic simulation across the complete coronary arterial tree and demonstrate the influence of side branches on coronary hemodynamics by comparing shear stress between coronary models with and without these included. The proposed novel computational framework based on biplane angiography enables significant arterial circulation analysis. This study shows that models that take into account flow through all side branches are required for precise computation of shear stress and pressure gradient whereas models that have only a subset of side branches are inadequate for biomechanical studies as they may overestimate volumetric outflow and shear stress. This study extends the ongoing computational efforts and demonstrates that models based on accurate coronary physiology can improve overall fidelity of biomechanical studies to compute hemodynamic risk-factors.

Astragaloside IV Exerts a Myocardial Protective Effect against Cardiac Hypertrophy in Rats, Partially via Activating the Nrf2/HO-1 Signaling Pathway

Previous evidence suggested that astragaloside IV (ASIV) had a cardioprotective effect, but the potential mechanisms were undetermined. This study is aimed at validating the prevention of cardiac hypertrophy in chronic heart failure (CHF) rats and hypertrophy in H9c2 cardiomyocytes by ASIV and at exploring the potential mechanism involved. CHF rat models of abdominal aortic constriction (AAC) were used with the aim of determining the protective effect of ASIV in cardiac hypertrophy in the rats. We proved that ASIV could attenuate cardiac hypertrophy by improving left ventricular function and structure and showed that the expression of nuclear factor-erythroid 2-related factor 2 (Nrf2) and its downstream gene heme oxygenase-1 (HO-1) increased in the high-dose ASIV intervention group. To further investigate the specific mechanism of ASIV, we hypothesized that ASIV might prevent cardiac hypertrophy via activating the Nrf2/HO-1 signaling pathway. We established a cardiomyocyte hypertrophy model induced by angiotensin II (Ang II), which was then transfected with Nrf2 shRNA, to knock down the expression of the Nrf2 gene. We found that the protective effect of ASIV against Ang II-induced cardiomyocyte hypertrophy was abolished in the Nrf2 shRNA transfection group, ultimately aggravating cardiomyocyte hypertrophy induced by Ang II, and it is possible that oxidative stress may be involved in this process. Our results demonstrated that ASIV improved cardiac function and inhibited cardiac hypertrophy by upregulating Nrf2, and this effect was partially achieved by stimulating the Nrf2/HO-1 signaling pathway, suggesting that ASIV could have therapeutic potential for the treatment of cardiac hypertrophy and CHF.

Mechanotransmission of haemodynamic forces by the endothelial glycocalyx in a full-scale arterial model

The glycocalyx has been identified as a key mechano-sensor of the shear forces exerted by streaming blood onto the vascular endothelial lining. Although the biochemical reaction to the blood flow has been extensively studied, the mechanism of transmission of the haemodynamic shear forces to the endothelial transmembrane anchoring structures and, consequently, to the subcellular elements in the cytoskeleton, is still not fully understood. Here we apply a multiscale approach to elucidate how haemodynamic shear forces are transmitted to the transmembrane anchors of endothelial cells. Wall shear stress time histories, as obtained from image-based computational haemodynamics models of a carotid bifurcation, are used as a load and a continuum model is applied to obtain the mechanical response of the glycocalyx all along the cardiac cycle. The main findings of this in silico study are that: (1) the forces transmitted to the transmembrane anchors are in the range of 1-10 pN, which is in the order of magnitude reported for the different conformational states of transmembrane mechanotranductors; (2) locally, the forces transmitted to the anchors of the glycocalyx structure can be markedly different from the near-wall haemodynamic shear forces both in amplitude and frequency content. The findings of this in silico approach warrant future studies focusing on the actual forces transmitted to the transmembrane mechanotransductors, which might outperform haemodynamic descriptors of disturbed shear as localizing factors of vascular disease.

Recent Advances in Understanding the Pathogenesis of Cardiovascular Diseases and Development of Treatment Modalities

Cardiovascular Diseases (CVDs) are a leading cause of morbidity and mortality worldwide. The underlying pathology for cardiovascular disease is largely atherosclerotic in nature and the steps include fatty streak formation, plaque progression and plaque rupture. While there is optimal drug therapy available for patients with CVD, there are also underlying drug delivery obstacles that must be addressed. Challenges in drug delivery warrant further studies for the development of novel and more efficacious medical therapies. An extensive understanding of the molecular mechanisms of disease in combination with current challenges in drug delivery serves as a platform for the development of novel drug therapeutic targets for CVD. The objective of this article is to review the pathogenesis of atherosclerosis, first-line medical treatment for CVD, and key obstacles in an efficient drug delivery.

Effects of blood flow dynamics on autologous pericardial degeneration in reconstructed pulmonary arteries

OBJECTIVES

To clarify the risk factors for abnormal degeneration of autologous pericardium, the mechanical stress on the endothelial tissue caused by turbulent blood flow in the pulmonary artery (PA) reconstructed with autologous pericardium and major aortopulmonary collateral arteries was assumed in pulmonary atresia and ventricular septal defect.

METHODS

Patient-specific PA models were created for 6 patients based on their past computed tomography images taken after unifocalization of major aortopulmonary collateral arteries. Computational fluid dynamics models were created to simulate the physiological pulsatile flow including the peripheral reflection wave, characteristic impedance and autonomous regulation system. Flow streamline, wall shear stress (WSS) and the oscillatory shear index (OSI) were calculated from the simulated result. PA degeneration was evaluated with the computed tomography images before the intracardiac repair.

RESULTS

Regions with physiological high WSS had fewer abnormal changes. Excessively high WSS was often detected at the anastomosis site of the reconstructed PA, and intimal thickening was found in these regions during intracardiac repair. Regions with high OSI and low WSS had dilated change within several months. In 1 patient, in particular, detached vortex flow occurred at the rectangular angle anastomosis site of the right PA in flow streamline, resulting in high OSI and low WSS with abnormal enlargement in the pericardium.

CONCLUSIONS

Endothelial stress caused by blood flow would affect the degeneration of autologous pericardium and major aortopulmonary collateral arteries in the reconstructed PA. High OSI and low WSS might induce enlargement or dilatation, and excessively high WSS in the anastomosis site might induce intimal thickening.

Tissue Models for Neurogenesis and Repair in 3D

Development and maturation of vascular and neuronal tissues occurs simultaneously in utero, and are regulated by significant crosstalk. We report on the development of a 3D tissue system to model neurogenesis and recapitulate developmental signaling conditions. Human umbilical vein endothelial cells (HUVECs) were seeded inside channels within collagen gels to represent nascent vascular networks. Axons extending from chicken dorsal root ganglia (DRGs) grew significantly longer and preferentially towards the HUVEC seeded channels with respect to unloaded channels. To replicate these findings without the vascular component, channels were loaded with brain-derived neurotrophic factor (BDNF), the principle signaling molecule in HUVEC-stimulated axonal growth, and axons likewise were significantly longer and grew preferentially towards the BDNF-loaded channels with respect to controls. This 3D tissue system was then used as an in vitro replicate for peripheral nerve injury, with neural repair observed within 2 weeks. These results demonstrate that our 3D tissue system can model neural network formation, repair after laceration injuries, and can be utilized to further study how these networks form and interact with other tissues, such as skin or skeletal muscle.

Progressive changes of elastic moduli of arterial wall and atherosclerotic plaque components during plaque development in human coronary arteries

Stiffness of the arterial wall and atherosclerotic plaque components is a determinant of the stress field within plaques, which has been suggested to be an indicator of plaque vulnerability. The diversity and inhomogeneous structure of atherosclerotic lesions complicate the characterization of plaque components. In the present study, stiffness of the arterial wall and atherosclerotic plaque components in human coronary arteries was examined in early and developed atherosclerotic lesions. The force-spectroscopy mode of the atomic force microscope and histological examination were used for determination of elastic moduli at specified locations within samples. Fibrous cap (E = 14.1 ± 3.8 kPa) showed lower stiffness than the fibrous tissue beneath the lipid pool (E = 17.6 ± 3.2 kPa). Calcification zones (E = 96.1 ± 18.8 kPa) and lipid pools (E = 2.7 ± 1.8 kPa) were the stiffest and softest components of atherosclerotic lesions, respectively. The increase of media stiffness (%44.8) and reduction of the elastic modulus of the internal elastic lamina (%28.9) was observed in coronary arteries. Moreover, significant differences were observed between the stiffness of medial layer in diseased parts and free-plaque segments in incomplete plaques of coronary arteries. Our results can be used for better understanding of remodeling mechanisms of the arterial wall with plaque development. Graphical abstract Stiffness alteration of the arterial wall and atherosclerotic plaque components with plaque development in coronary arteries.

Vascular endothelial dysfunction in the wake of HIV and ART

Mounting evidence points to increased rates of cardiovascular disease (CVD) among people living with HIV/AIDS (PLWHA). Endothelial dysfunction (loss of endothelium-dependent vascular relaxation in response to provasodilatory stimuli) constitutes an early pathophysiological event in atherogenesis and CVD. Both HIV-1 infection and antiretroviral therapy (ART) are implicated in the development of endothelial dysfunction; however, conclusions are frequently drawn from associations shown in epidemiological studies. In this narrative review of mainly in vitro and animal studies, we report on the current understanding of how various HIV-1 proteins, HIV-1-induced proinflammatory cytokines and common antiretroviral drugs directly impact vascular endothelial cells. Proposed cellular mechanisms underlying the switch to a dysfunctional state are discussed, including oxidative stress, impaired expression and regulation of endothelial nitric oxide (NO) synthase (eNOS) and increased expression of vascular adhesion molecules. From the literature, it appears that increased reactive oxygen species (ROS) production, linked to decreased NO bioavailability and ensuing endothelial dysfunction, may be proposed as a putative final common pathway afflicting the vascular endothelium in PLWHA. The HIV-1-proteins Tat, Gp120 and Nef in particular, the proinflammatory cytokine, TNF-α, and the antiretroviral drugs Efavirenz and Lopinavir, most commonly postulated to be primary causal agents of endothelial dysfunction, are also discussed. We conclude that, despite existing evidence from basic research papers, a significant gap remains in terms of the exact underlying cellular mechanisms involved in HIV-1 and ART induced endothelial dysfunction. Bridging this gap could help pave the way for future strategies to prevent and treat early cardiovascular changes in PLWHA.

Impact of Plaque Composition on Risk of Coronary Artery Diseases in Patients with Carotid Artery Stenosis

OBJECT

Recent clinical studies have recently demonstrated a strong association between carotid artery stenosis and coronary artery disease (CAD). However, the clinical impact of carotid plaque composition on CAD remains unclear. This study was aimed to determine the relationship between carotid plaque composition and CAD in patients who underwent carotid endarterectomy (CEA) or carotid artery stenting (CAS).

METHODS

This prospective cohort study included a total of 97 patients who were admitted to our institution between January 2012 and April 2016. Magnetic resonance (MR) imaging was performed to semi-quantitatively analyze the components of carotid plaques by calculating the ratio of plaque intensity to muscle intensity on T1-weighted image. Diagnosis of CAD was based on patient history and clinical examinations during preoperative, postoperative and follow-up periods. Multivariate logistic analysis was performed to determine the risk factors for CAD. The relationship between contralateral plaque composition and CAD was also investigated.

RESULTS

Of 97 patients, 33 were diagnosed as having 44 episodes of CAD. Multivariate logistic analysis revealed that ASO (odds ratio [OR], 5.7; 95% confidence interval [CI], 1.8-18.9), contralateral carotid occlusive disease (OR, 6.5; 95%CI, 1.7-22.9), and plaque/muscle ratio (OR, 3.0; 95%CI, 1.4-10.1) were independent factors for predicting CAD. The patients diagnosed as having CAD during the follow-up period had significantly higher plaque/muscle ratio than those with CAD on preoperative evaluations (2.29 ± .21vs. 1.97 ± .33, P < .01).

CONCLUSIONS

This study clearly demonstrates that ASO, contralateral carotid artery stenosis, and high-intensity carotid plaque on T1-weighted MRI independently predict CAD. Contralateral carotid plaque composition was also associated with concomitant CAD. Moreover, high-intensity carotid plaque may predict the future development of CAD. Therefore, unstable carotid plaque should be considered as the clinical phenotype of systemic inflammation and a novel, robust marker for future CAD.

Magnetohydrodynamic blood flow in patients with coronary artery disease

OBJECTIVES

We aim to investigate the effect of a magnetic field with varying intensities on haemodynamic perturbations in a cohort of patients with coronary artery disease.

METHODS

Transient computational fluid dynamics (CFD) simulations were performed in three-dimensional (3D) models of coronary arteries reconstructed from 3D quantitative coronary angiography. The effect of magnetic field on wall shear stress (WSS) derived parameters including maximum wall shear stress (MWSS) and size of regions with low wall shear stress (ALWSS) as well as length of flow recirculation zones were determined.

RESULTS

The results showed a substantial reduction in MWSS, ALWSS and length of flow recirculation zones in the presence of magnetic field, in particular for coronaries with moderate to severe stenoses. When the whole cohort examined, time-averaged wall shear stress (TAWSS), ALWSS and the length of flow recirculation zones in the absence of magnetic field were approximately 1.71, 4.69 and 8.46 times greater than those in the presence of magnetic field, respectively.

CONCLUSION

Our findings imply that an externally applied magnetic field can improve haemodynamic perturbations in human coronary arteries.

Association of global and local low endothelial shear stress with high-risk plaque using intracoronary 3D optical coherence tomography: Introduction of 'shear stress score'

Aims

The association of low endothelial shear stress (ESS) with high-risk plaque (HRP) has not been thoroughly investigated in humans. We investigated the local ESS and lumen remodelling patterns in HRPs using optical coherence tomography (OCT), developed the shear stress score, and explored its association with the prevalence of HRPs and clinical outcomes.

Methods and results

A total of 35 coronary arteries from 30 patients with stable angina or acute coronary syndrome (ACS) were reconstructed with three dimensional (3D) OCT. ESS was calculated using computational fluid dynamics and classified into low, moderate, and high in 3-mm-long subsegments. In each subsegment, (i) fibroatheromas (FAs) were classified into HRPs and non-HRPs based on fibrous cap (FC) thickness and lipid pool size, and (ii) lumen remodelling was classified into constrictive, compensatory, and expansive. In each artery the shear stress score was calculated as metric of the extent and severity of low ESS. FAs in low ESS subsegments had thinner FC compared with high ESS (89 ± 84 vs.138 ± 83 µm, P < 0.05). Low ESS subsegments predominantly co-localized with HRPs vs. non-HRPs (29 vs. 9%, P < 0.05) and high ESS subsegments predominantly with non-HRPs (9 vs. 24%, P < 0.05). Compensatory and expansive lumen remodelling were the predominant responses within subsegments with low ESS and HRPs. In non-stenotic FAs, low ESS was associated with HRPs vs. non-HRPs (29 vs. 3%, P < 0.05). Arteries with increased shear stress score had increased frequency of HRPs and were associated with ACS vs. stable angina.

Conclusion

Local low ESS and expansive lumen remodelling are associated with HRP. Arteries with increased shear stress score have increased frequency of HRPs and propensity to present with ACS.

Development of a Computational Fluid Dynamics Model for Myocardial Bridging

Computational fluid dynamics (CFD) modeling of myocardial bridging (MB) remains challenging due to its dynamic and phasic nature. This study aims to develop a patient-specific CFD model of MB. There were two parts to this study. The first part consisted of developing an in silico model of the left anterior descending (LAD) coronary artery of a patient with MB. In this regard, a moving-boundary CFD algorithm was developed to simulate the patient-specific muscle compression caused by MB. A second simulation was also performed with the bridge artificially removed to determine the hemodynamics in the same vessel in the absence of MB. The second part of the study consisted of hemodynamic analysis of three patients with mild and moderate and severe MB in their LAD by means of the developed in silico model in the first part. The average shear stress in the proximal and bridge segments for model with MB were significantly different from those for model without MB (proximal segment: 0.32 ± 0.14 Pa (with MB) versus 0.97 ± 0.39 Pa (without MB), P < 0.0001 — bridge segment: 2.60 ± 0.94 Pa (with MB) versus 1.50 ± 0.64 Pa (without MB), P < 0.0001). When all three patients were evaluated, increasing the degree of vessel compression shear stress in the proximal segment decreased, whereas the shear stress in the bridge segment increased. The presence of MB resulted in hemodynamic abnormalities in the proximal segment, whereas segments within the bridge exhibited hemodynamic patterns which tend to discourage atheroma development.

Safety and Efficacy of Extremely Low LDL-Cholesterol Levels and Its Prospects in Hyperlipidemia Management

The risk of cardiovascular disease has been reported to have a linear relationship with LDL levels. Additionally, the currently recommended LDL target goal of 70 mg/dl does not diminish the CV risk entirely leaving behind some residual risk. Previous attempts to maximally lower the LDL levels with statin monotherapy have met dejection due to the increased side effects associated with the treatment. Nevertheless, with the new advancements in clinical medicine, it has now become possible to bring down the LDL levels to as low as 15 mg/dl using PCSK9 monoclonal antibodies alone or in combination with statins. The development of inclisiran, siRNA silencer targeting PCSK9 gene, is a one step forward in these endeavors. Moreover, various studies aiming to lower the CV risk and mortality by lowering LDL levels have demonstrated encouraging results. The current challenge is to explore this arena to redefine the target LDL levels, if required, to avoid any suboptimal treatment. After thorough literature search in the PubMed, Embase, Scopus, and Google Scholar, we present this article to provide a brief overview of the safety and efficacy of lowering LDL below the current goal.

Rheolytic effects of left main mid-shaft/distal stenting: a computational flow dynamic analysis

Background The aim of this study was to evaluate the rheolytic effects of stenting a mid-shaft/distal left main coronary artery (LMCA) lesion with and without ostial coverage. Stenting of the LMCA has emerged as a valid alternative in place of traditional coronary bypass graft surgery. However, in case of mid-shaft/distal lesion, there is no consensus regarding the extension of the strut coverage up to the ostium or to stent only the culprit lesion. Methods We reconstructed a left main-left descending coronary artery (LM-LCA)-left circumflex (LCX) bifurcation after analysing 100 consecutive patients (mean age 71.4 ± 9.3, 49 males) with LM mid-shaft/distal disease. The mean diameter of proximal LM, left anterior descending (LAD) and LCX, evaluated with quantitative coronary angiography (QCA) was 4.62 ± 0.86 mm, 3.31 ± 0.92 mm, and 2.74 ± 0.93 mm, respectively. For the stent simulation, a third-generation, everolimus-eluting stent was virtually reconstructed. Results After virtual stenting, the net area averaged wall shear stress (WSS) of the model and the WSS at the LCA-LCX bifurcation resulted higher when the stent covered the culprit mid-shaft lesion only compared with the extension of the stent covering the ostium (3.68 versus 2.06 Pa, p = 0.01 and 3.97 versus 1.98 Pa, p < 0.001, respectively. Similarly, the static pressure and the Reynolds number were significantly higher after stent implantation covering up the ostium. At the ostium, the flow resulted more laminar when stenting only the mid-shaft lesion than including the ostium. Conclusions Although these findings cannot be translated directly into real practice our brief study suggests that stenting lesion 1:1 or extending the stent to cover the LM ostium impacts differently the rheolytic properties of LMCA bifurcation with potential insights for restenosis or thrombosis.

Local Flow Patterns After Implantation of Bioresorbable Vascular Scaffold in Coronary Bifurcations - Novel Findings by Computational Fluid Dynamics

BACKGROUND

Development of methods for accurate reconstruction of bioresorbable scaffolds (BRS) and assessing local hemodynamics is crucial for investigation of vascular healing after BRS implantation.Methods and Results:Patients with BRS that crossed over in a coronary bifurcation were included for analysis. Reconstructions of the coronary lumen and BRS were performed by fusion of optical coherence tomography and coronary angiography generating a tree model (TM) and a hybrid model with BRS (TM-BRS). A virtual BRS model with thinner struts was created and all 3 models were analyzed using computational fluid dynamics to derive: (1) time-average shear stress (TASS), (2) TASS gradient (TASSG), which represents SS heterogeneity, and (3) fractional flow reserve (FFR). Reconstruction of the BRS was successful in all 10 patients. TASS and TASSG were both higher by TM-BRS than by TM in main vessels (difference 0.27±4.30 Pa and 10.18±27.28 Pa/mm, P<0.001), with a remarkable difference at side branch ostia (difference 13.51±17.40 Pa and 81.65±105.19 Pa/mm, P<0.001). With thinner struts, TASS was lower on the strut surface but higher at the inter-strut zones, whereas TASSG was lower in both regions (P<0.001 for all). Computational FFR was lower by TM-BRS than by TM for both main vessels and side branches (P<0.001).

CONCLUSIONS

Neglecting BRS reconstruction leads to significantly lower SS and SS heterogeneity, which is most pronounced at side branch ostia. Thinner struts can marginally reduce SS heterogeneity.

Obesity, blood rheology and angiogenesis

Adipose tissue is actively involved in angiogenesis through secretion of biologically active substances. This topic has been the subject of many recent publications concerning the pathophysiology and treatment of obesity. We discuss the relationship between obesity, angiogenesis and blood rheology.

Temporal and spatial changes in wall shear stress during atherosclerotic plaque progression in mice

Wall shear stress (WSS) is involved in atherosclerotic plaque initiation, yet its role in plaque progression remains unclear. We aimed to study (i) the temporal and spatial changes in WSS over a growing plaque and (ii) the correlation between WSS and plaque composition, using animal-specific data in an atherosclerotic mouse model. Tapered casts were placed around the right common carotid arteries (RCCA) of ApoE^-/- mice. At 5, 7 and 9 weeks after cast placement, RCCA geometry was reconstructed using contrast-enhanced micro-CT. Lumen narrowing was observed in all mice, indicating the progression of a lumen intruding plaque. Next, we determined the flow rate in the RCCA of each mouse using Doppler Ultrasound and computed WSS at all time points. Over time, as the plaque developed and further intruded into the lumen, absolute WSS significantly decreased. Finally at week 9, plaque composition was histologically characterized. The proximal part of the plaque was small and eccentric, exposed to relatively lower WSS. Close to the cast a larger and concentric plaque was present, exposed to relatively higher WSS. Lower WSS was significantly correlated to the accumulation of macrophages in the eccentric plaque. When pooling data of all animals, correlation between WSS and plaque composition was weak and no longer statistically significant. In conclusion, our data showed that in our mouse model absolute WSS strikingly decreased during disease progression, which was significantly correlated to plaque area and macrophage content. Besides, our study demonstrates the necessity to analyse individual animals and plaques when studying correlations between WSS and plaque composition.

Quantification of disturbed coronary flow by disturbed vorticity index and relation with fractional flow reserve

BACKGROUND AND AIMS

The relation between FFR and local coronary flow patterns is incompletely understood. We aimed at developing a novel hemodynamic index to quantify disturbed coronary flow, and to investigate its relationship with lesion-associated pressure-drop, and fractional flow reserve (FFR).

METHODS

Three-dimensional angiographic reconstruction and computational fluid dynamics were applied to simulate pulsatile coronary flow. Disturbed vorticity index (DVI) was derived to quantify the stenosis-induced flow disturbance. The relation between DVI and pressure-drop was assessed in 9 virtual obstruction models. Furthermore, we evaluated the correlation between DVI, FFR, hyperemic flow velocity, and anatomic parameters in 84 intermediate lesions from 73 patients.

RESULTS

In virtual models, DVI increased with increasing flow rate, stenosis severity, and lesion complexity. The correlation between DVI and pressure-drop across all models was excellent (determination coefficient R² = 0.85, p < 0.001). In vivo, DVI showed a correlation with FFR (rho (ρ) = -0.74, p < 0.001) that was stronger than the relations of FFR with hyperemic flow velocity (ρ = -0.27, p=0.015), lesion length (ρ = -0.36, p=0.001) and percent diameter stenosis (ρ = -0.40, p < 0.001).

CONCLUSIONS

DVI, a novel index to quantify disturbed flow, was related to pressure-drop in virtual obstruction models and showed a strong inverse relation with FFR in intermediate lesions in vivo. It supports the prognostic value of FFR and may provide additional information about sources of energy loss when measuring FFR.

Comparative Computed Flow Dynamic Analysis of Different Optimization Techniques in Left Main Either Provisional or Culotte Stenting

Background and Objectives

Provisional and culotte are the most commonly used techniques in left main (LM) stenting. The impact of different post-dilation techniques on fluid dynamic of LM bifurcation has not been yet investigated. The aim of this study is to evaluate, by means of computational fluid dynamic analysis (CFD), the impact of different post-dilation techniques including proximal optimization technique (POT), kissing balloon (KB), POT-Side-POT and POT-KB-POT, 2-steps Kissing (2SK) and Snuggle Kissing balloon (SKB) on flow dynamic profile after LM provisional or culotte stenting.

Methods

We considered an LM-LCA-LCX bifurcation reconstructed after reviewing 100 consecutive patients (mean age 71.4 ± 9.3 years, 49 males) with LM distal disease. The diameters of LAD and LCX were modelled according to the Finnet's law as following: LM 4.5 mm, LAD 3.5 mm, LCX 2.75 mm, with bifurcation angle set up at 55°. Xience third-generation stent (Abbot Inc., USA) was reconstructed and virtually implanted in provisional/cross-over and culotte fashion. POT, KB, POT-side-POT, POT-KB-POT, 2SK and SKB were virtually applied and analyzed in terms of the wall shear stress (WSS).

Results

Analyzing the provisional stenting, the 2SK and KB techniques had a statistically significant lower impact on the WSS at the carina, while POT seemed to obtain a neutral effect. In the wall opposite to the carina, the more physiological profile has been obtained by KB and POT with higher WSS value and smaller surface area of the lower WSS. In culotte stenting, at the carina, POT-KB-POT and 2SK had a very physiological profile; while at the wall opposite to the carina, 2SK and POT-KB-POT decreased significantly the surface area of the lower WSS compared to the other techniques.

Conclusion

From the fluid dynamic point of view in LM provisional stenting, POT, 2SK and KB showed a similar beneficial impact on the bifurcation rheology, while in LM culotte stenting, POT-KB-POT and 2SK performed slightly better than the other techniques, probably reflecting a better strut apposition.