Biological designer self-assembling peptide nanofiber scaffolds significantly enhance osteoblast proliferation, differentiation and 3-D migration

Nanostructured interfacial self-assembled peptide-polymer membranes for enhanced mineralization and cell adhesion

Soft interfacial materials, such as self-assembled polymer membranes, are gaining increasing interest as biomaterials since they can provide selective barriers and/or controlled affinity interactions important to regulate cellular processes. Herein, we report the design and fabrication of multiscale structured membranes integrating selective molecular functionalities for potential applications in bone regeneration. The membranes were obtained by interfacial self-assembly of miscible aqueous solutions of hyaluronan and multi-domain peptides (MDPs) incorporating distinct biochemical motifs, including mineralizing (EE), integrin-binding (RGDS) and osteogenic (YGFGG) peptide sequences. Circular dichroism and Fourier transform infrared spectroscopy analyses of the MDPs revealed a predominant β-sheet conformation, while transmission electron microscopy (TEM) showed the formation of fibre-like nanostructures with different lengths. Scanning electron microscopy (SEM) of the membranes showed an anisotropic structure and surfaces with different nanotopographies, reflecting the morphological differences observed under TEM. All the membranes were able to promote the deposition of a calcium-phosphate mineral on their surface when incubated in a mineralizing solution. The ability of the MDPs, coated on coverslips or presented within the membranes, to support cell adhesion was investigated using primary adult periosteum-derived cells (PDCs) under serum-free conditions. Cells on the membranes lacking RGDS remained round, while in the presence of RGDS they appear to be more elongated and anchored to the membrane. These observations were confirmed by SEM analysis that showed cells attached to the membrane and exhibiting an extended morphology with close interactions with the membrane surface. We anticipate that these molecularly designed interfacial membranes can both provide relevant biochemical signals and structural biomimetic components for stem cell growth and differentiation and ultimately promote bone regeneration.

Designer D-form self-assembling peptide scaffolds promote the proliferation and migration of rat bone marrow-derived mesenchymal stem cells

Self-assembling peptide (SAP) nanofiber hydrogel scaffolds have become increasingly important in tissue engineering due to their outstanding bioactivity and biodegradability. However, there is an initial concern on their long-term clinical use, since SAPs made of L-form amino acid sequences are sensitive to enzymatic degradation. In this study, we present a designer SAP, D-RADA16, made of all D-amino acid. We investigated the nanofiber morphology of D-RADA16, its potential for the culture of bone marrow-derived mesenchymal stem cells (BMSCs), and the proteolytic resistance of the biomaterial. The results revealed that D-RADA16 exhibited stable β-sheets and formed interwoven nanofiber scaffolds in water. D-RADA16 and L-RADA16 hydrogel scaffolds were both found to promote the proliferation and migration of rat BMSCs in the 3D cell culture microenvironment. Furthermore, the D-RADA16 scaffolds exhibited a higher proteolytic resistance against proteinase K than the L-RADA16 scaffolds. These observations indicate that D-RADA16 hydrogel scaffolds have excellent bioactivity, biocompatibility and biostability, and thus may serve as promising candidates for long-term application in vivo.

Mesoporous silica nanoparticles in injectable hydrogels: factors influencing cellular uptake and viability

The incorporation of nanoparticles as drug vectors into 3D scaffolds has attracted a lot of recent interest. In particular, tissue engineering applications would benefit from a spatially and temporally regulated release of biological cues, which act on precursor/stem cells in a three-dimensional growth environment. Injectable cell- and nanoparticle-containing scaffolds are especially interesting in this respect, but require matrix self-assembly and coordinated interactions between cells, matrices, and nanoparticles, which are largely uncharacterized yet. In this proof of concept study we combined the matrix-forming self-assembling peptide RADA16-I, different mesoporous silica nanoparticles (MSN) as potential drug carriers, and MC3T3-E1 osteoblast precursor cells. When injected to physiological media, the mixtures rapidly formed hybrid peptide-silica hydrogels containing RADA16-I nanofiber scaffolds with uniform spatial distribution of viable cells and MSN. MSN surface chemistry was critical for interactions within the hydrogel and for RADA16-I adsorption, thereby dominantly influencing cellular uptake and cell viability, whereas the impact of serum protein was minor. Thus, important parameters which allow tuning of nanoparticulate drug vector interactions with cells in injectable 3D scaffolds are identified, which are of importance for the future design of smart scaffolds for advanced tissue engineering in vivo.

* Extracellular Matrices for Bone Regeneration: A Literature Review

The gold standard material for bone regeneration is still autologous bone, a mesenchymal tissue that consists mainly of extracellular matrix (ECM) (90% v/v) and little cellular content (10% v/v). However, the fact that decellularized allogenic bone grafts often present a clinical performance comparable to autologous bone grafts demonstrates the crucial role of ECM in bone regeneration. For long, the mechanism by which bone allografts function was not clear, but recent research has unveiled many unique characteristics of ECM that seem to play a key role in tissue regeneration. This is further confirmed by the fact that synthetic biomaterials with composition and properties resembling bone ECM present excellent bone regeneration properties. In this context, ECM molecules such as glycosaminoglycans (GAGs) and self-assembly peptides (SAPs) can improve the performance of bone regeneration biomaterials. Moreover, decellularized ECM derived either from native tissues such as bone, cartilage, skin, and tooth germs or from cells such as osteoblasts, chondrocytes, and stem cells has shown promising results in bone regeneration applications. Understanding the role of ECM in bone regeneration is crucial for the development of the next generation of biomaterials for bone tissue engineering. In this sense, this review addresses the state-of-the-art on this subject matter.

Self-Assembling RADA16-I Peptide Hydrogel Scaffold Loaded with Tamoxifen for Breast Reconstruction

More and more breast cancer patients prefer autologous fat tissue transfer following lumpectomy to maintain perfect female characteristics. However, the outcome was not satisfactory due to the transplanted fat absorption. In this study, we prepared two RADA16-I peptide scaffolds with and without tamoxifen. Both scaffolds were transparent, porous, and hemisphere-shaped. The hADSCs isolated from liposuction were attached to the scaffold. The growth inhibition of the hADSCs induced by TAM in 2-demensional (2D) culture was higher than that in TAM-loaded hydrogel scaffold 3D culture (P < 0.05); however, the same outcomes were not observed in MCF-7 cells. Correspondingly, the apoptosis of the hADSCs induced by TAM was significantly increased in 2D culture compared to that in scaffold 3D culture (P < 0.05). Yet the outcomes of the aoptosis in MCF-7 were contrary. Apoptosis-related protein Bcl-2 was involved in the process. In vivo experiments showed that both scaffolds formed a round mass after subcutaneous implantation and it retained its shape after being pressed slightly. The implantation had no effect on the weight and activity of the animals. The results suggested that TAM-loaded RADA16-I hydrogel scaffolds both provide support for hADSCs cells attachment/proliferation and retain cytotoxic effect on MCF-7 cells, which might be a promising therapeutic breast tissue following lumpectomy.

Self-assembled nanofiber coatings for controlling cell responses

Nanofibers are thought to enhance cell adhesion, growth, and function. We demonstrate that the choice of building blocks in self-assembling nanofiber systems can be used to control cell behavior. The use of 2 D-coated, self-assembled nanofibers in controlling lens epithelial cells, fibroblasts, and mesenchymal stem cells was investigated, focusing on gene and protein expression related to the fibrotic response. To this end, three nanofibers with different characteristics (morphology, topography, and wettability) were compared with two standard materials frequently used in culturing cells, TCPS, and a collagen type I coating. Cell metabolic activity, cell morphology, and gene and protein expression were analyzed. The most hydrophilic nanofiber with more compact network consisting of small fibers proved to provide a beneficial 2 D environment for cell proliferation and matrix formation while decreasing the fibrotic/stress behavior in all cell lines when compared with TCPS and the collagen type I coating. This nanofiber demonstrates the potential to be used as a biomimetic coating to study the development of fibrosis through epithelial-to-mesenchymal transition. This study also shows that nanofiber structures do not enhance cell function by definition, because the physico-chemical characteristics of the nanofibers influence cell behavior as well and actually can be used to regulate cell behavior toward suboptimal performance. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2252-2265, 2017.

Amino Acids and Peptide-Based Supramolecular Hydrogels for Three-Dimensional Cell Culture

Supramolecular hydrogels assembled from amino acids and peptide-derived hydrogelators have shown great potential as biomimetic three-dimensional (3D) extracellular matrices because of their merits over conventional polymeric hydrogels, such as non-covalent or physical interactions, controllable self-assembly, and biocompatibility. These merits enable hydrogels to be made not only by using external stimuli, but also under physiological conditions by rationally designing gelator structures, as well as in situ encapsulation of cells into hydrogels for 3D culture. This review will assess current progress in the preparation of amino acids and peptide-based hydrogels under various kinds of external stimuli, and in situ encapsulation of cells into the hydrogels, with a focus on understanding the associations between their structures, properties, and functions during cell culture, and the remaining challenges in this field. The amino acids and peptide-based hydrogelators with rationally designed structures have promising applications in the fields of regenerative medicine, tissue engineering, and pre-clinical evaluation.

Harnessing supramolecular peptide nanotechnology in biomedical applications

The harnessing of peptides in biomedical applications is a recent hot topic. This arises mainly from the general biocompatibility of peptides, as well as from the ease of tunability of peptide structure to engineer desired properties. The ease of progression from laboratory testing to clinical trials is evident from the plethora of examples available. In this review, we compare and contrast how three distinct self-assembled peptide nanostructures possess different functions. We have 1) nanofibrils in biomaterials that can interact with cells, 2) nanoparticles that can traverse the bloodstream to deliver its payload and also be bioimaged, and 3) nanotubes that can serve as cross-membrane conduits and as a template for nanowire formation. Through this review, we aim to illustrate how various peptides, in their various self-assembled nanostructures, possess great promise in a wide range of biomedical applications and what more can be expected.

Engineering β-sheet peptide assemblies for biomedical applications

Hydrogels have been widely studied in various biomedical applications, such as tissue engineering, cell culture, immunotherapy and vaccines, and drug delivery. Peptide-based nanofibers represent a promising new strategy for current drug delivery approaches and cell carriers for tissue engineering. This review focuses on the recent advances in the use of self-assembling engineered β-sheet peptide assemblies for biomedical applications. The applications of peptide nanofibers in biomedical fields, such as drug delivery, tissue engineering, immunotherapy, and vaccines, are highlighted. The current challenges and future perspectives for self-assembling peptide nanofibers in biomedical applications are discussed.

Designer bFGF-incorporated d-form self-assembly peptide nanofiber scaffolds to promote bone repair

d-Form and l-form peptide nanofiber scaffolds can spontaneously form stable β-sheet secondary structures and nanofiber hydrogel scaffolds, and hold some promise in hemostasis and wound healing. We report here on the synthetic self-assembling peptide d-RADA16 and l-RADA16 are both found to produce stable β-sheet secondary structure and nanofiber hydrogel scaffolds based on circular dichroism (CD) spectroscopy, transmission electron microscopy (TEM) and rheology analysis etc. d-RADA16 hydrogel and l-RADA16 hydrogel can enhance obvious bone repair in femoral condyle defects of the Sprague-Dawley (SD) rat model compared to PBS treatment. Based on micro-computed tomography (CT), it was revealed that d-RADA16 hydrogel and l-RADA16 hydrogel were capable to obtain the extensive bone healing. Histological evaluation also found that these two hydrogels facilitate the presence of more mature bone tissue within the femoral condyle defects. Additionally, d-RADA16 hydrogel showed some potential in storing and releasing basic-fibroblast growth factor (bFGF) which was able to further promote bone regeneration based on micro-CT analysis. These results indicate that d-form peptide nanofiber hydrogel have some special capacity for bone repair.

Enhancement of Neural Stem Cell Survival, Proliferation, Migration, and Differentiation in a Novel Self-Assembly Peptide Nanofibber Scaffold

Considerable efforts have been made to combine biologically active molecules into the self-assembling peptide in order to improve cells growth, survival, and differentiation. In this study, a novel three-dimensional scaffold (RADA₄GGSIKVAV; R-GSIK) was designed by adding glycine and serine between RADA4 and IKVAV to promote the strength of the peptide. The cell adhesion, viability, proliferation, migration, and differentiation of rat embryonic neural stem cells (NSCs) in R-GSIK were investigated and compared to laminin-coated, two-dimensional, and Puramatrix cultures. The scanning electron microscopy studies of the R-GSIK showed an open porous structure and a suitable surface area available for cell interaction. R-GSIK promoted the cell adhesion, viability, proliferation, and migration compared to the other cultures. In addition, the R-GSIK enhanced NSCs differentiation into neuronal cells. The NSCs injected in R-GSIK had a lower glial differentiation rate than in the Puramatrix. The results suggest that R-GSIK holds great promise for cell therapies and neuronal tissue repair.

Mechanisms underlying the antiapoptotic and anti-inflammatory effects of monotropein in hydrogen peroxide-treated osteoblasts

Monotropein, the primary iridoid glycoside isolated from Morindacitrifolia, has been previously reported to possess potent antioxidant and antiosteoporotic properties. However, there is no direct evidence correlating the antiosteoporotic effect of monotropein with its observed antioxidant capacity, and the molecular mechanisms involved in mediating these processes remain unclear. Therefore, the aim of the present study was to investigate the protective effects of monotropein against oxidative stress in osteoblasts and the mechanisms involved in mediating this process. Osteoblast viability was evaluated using the MTT assay. The mitochondrial membrane potential and reactive oxygen species were detected by flow cytometry analyses. Western blotting and enzyme‑linked immunosorbent assays were performed to detect protein expression levels. A significant reduction in osteoblast viability was observed at 24 h following exposure to various concentrations (100‑1,000 µM) of H2O2 compared with untreated osteoblasts. The cytotoxic effect of H2O2 was notably reversed when osteoblasts were pretreated with 1‑10 µg/ml monotropein. Pretreatment with 1-10 µg/ml monotropein increased the mitochondrial membrane potential and reduced the generation of reactive oxygen species in osteoblasts following exposure to H2O2. In addition, the H2O2‑induced increase in apoptotic markers (caspase-3 and caspase-9) and H2O2-induced reduction in sirtuin 1 levels were significantly reversed following pretreatment of cells with monotropein. Furthermore, monotropein significantly reduced H2O2‑induced stimulation of NF‑κB expression, in addition to the expression of a number of proinflammatory mediators. These results indicate that monotropein suppresses apoptosis and the inflammatory response in H2O2‑induced osteoblasts through the activation of the mitochondrial apoptotic signaling pathway and inhibition of the NF‑κB signaling pathway.

Peptidic Biomaterials: From Self-Assembling to Regenerative Medicine

Peptidic biomaterials represent a particularly exciting topic in regenerative medicine. Peptidic scaffolds can be specifically designed for biomimetic customization for targeted therapy. The field is at a pivotal point where preclinical research is being translated into clinics, so it is crucial to understand the theory and describe the status of this rapidly developing technology. In this review, we highlight major advantages and current limitations of self-assembling peptide-based biomaterials, and we discuss the most widely used classes of assembling peptides, describing recent and promising approaches in tissue engineering, drug delivery, and clinics. We also suggest design strategies and hurdles that still need to be overcome to fully exploit their therapeutic potential.

Design of Decorated Self-Assembling Peptide Hydrogels as Architecture for Mesenchymal Stem Cells

Hydrogels from self-assembling ionic complementary peptides have been receiving a lot of interest from the scientific community as mimetic of the extracellular matrix that can offer three-dimensional supports for cell growth or can become vehicles for the delivery of stem cells, drugs or bioactive proteins. In order to develop a 3D “architecture” for mesenchymal stem cells, we propose the introduction in the hydrogel of conjugates obtained by chemoselective ligation between a ionic-complementary self-assembling peptide (called EAK) and three different bioactive molecules: an adhesive sequence with 4 Glycine-Arginine-Glycine-Aspartic Acid-Serine-Proline (GRGDSP) motifs per chain, an adhesive peptide mapped on h-Vitronectin and the growth factor Insulin-like Growth Factor-1 (IGF-1). The mesenchymal stem cell adhesion assays showed a significant increase in adhesion and proliferation for the hydrogels decorated with each of the synthesized conjugates; moreover, such functionalized 3D hydrogels support cell spreading and elongation, validating the use of this class of self-assembly peptides-based material as very promising 3D model scaffolds for cell cultures, at variance of the less realistic 2D ones. Furthermore, small amplitude oscillatory shear tests showed that the presence of IGF-1-conjugate did not alter significantly the viscoelastic properties of the hydrogels even though differences were observed in the nanoscale structure of the scaffolds obtained by changing their composition, ranging from long, well-defined fibers for conjugates with adhesion sequences to the compact and dense film for the IGF-1-conjugate.

The role of peptides in bone healing and regeneration: a systematic review

BACKGROUND

Bone tissue engineering and the research surrounding peptides has expanded significantly over the last few decades. Several peptides have been shown to support and stimulate the bone healing response and have been proposed as therapeutic vehicles for clinical use. The aim of this comprehensive review is to present the clinical and experimental studies analysing the potential role of peptides for bone healing and bone regeneration.

METHODS

A systematic review according to PRISMA guidelines was conducted. Articles presenting peptides capable of exerting an upregulatory effect on osteoprogenitor cells and bone healing were included in the study.

RESULTS

Based on the available literature, a significant amount of experimental in vitro and in vivo evidence exists. Several peptides were found to upregulate the bone healing response in experimental models and could act as potential candidates for future clinical applications. However, from the available peptides that reached the level of clinical trials, the presented results are limited.

CONCLUSION

Further research is desirable to shed more light into the processes governing the osteoprogenitor cellular responses. With further advances in the field of biomimetic materials and scaffolds, new treatment modalities for bone repair will emerge.

Self-assembling peptide hydrogel scaffolds support stem cell-based hair follicle regeneration

Recent studies show that designer peptide nanofibers can mimic properties of extracellular matrix molecules, promising great potential as scaffold materials for tissue engineering. However, their ability in supporting organogenesis has not been studied. Here we examined the effect of self-assembling peptide hydrogels in supporting skin derived precursors (SKPs) in hair follicle neogenesis. We found that hydrogels formed by RADA16, PRG which contains RGD, and particularly the combination of RADA16 and PRG (RADA-PRG) enhanced SKP proliferation. Notably, the RADA-PRG hydrogel, which exhibited advantages of RADA16 in adequate nanofiber formation and PRG in providing the integrin binding sequence, exhibited superior effects in enhancing SKP survival, expression of hair induction signature genes such as Akp2 and Bmp6, and more importantly de novo hair genesis in mice. Thus our results suggest that RADA-PRG may serve as a novel scaffold material for stem cell transplantation and tissue engineering.

Combinatorial therapy with three-dimensionally cultured adipose-derived stromal cells and self-assembling peptides to enhance angiogenesis and preserve cardiac function in infarcted hearts

Even though stem cell therapy is a promising angiogenic strategy to treat ischaemic diseases, including myocardial infarction (MI), therapeutic efficacy is limited by low survival and retention of transplanted cells in ischaemic tissues. In addition, therapeutic angiogenesis depends on stimulating host angiogenesis with paracrine factors released by transplanted cells rather than on direct blood vessel formation by transplanted cells. In the present study, to overcome these limitations and to enhance the therapeutic efficacy of MI treatment, combinatorial therapy with three-dimensional cell masses (3DCMs) and self-assembling peptides (SAPs) was tested in a rat MI model. Spheroid-type 3DCMs, which are vascular differentiation-induced cells, were prepared by culturing human adipose-derived stromal cells on a fibroblast growth factor-immobilized surface. The SAPs were used as the carrier material to increase engraftment of transplanted cells. After coronary artery ligation, 3DCMs were combined with SAPs and were transplanted into ischaemic lesions. The therapeutic potential was evaluated 4 weeks after treatment. By combining 3DCMs and SAPs, survival and retention of transplanted cells increased threefold when compared with treatment with 3DCMs alone and transplanted cells established vascular networks in infarcted hearts. In addition, the size of the infarct in the 3DCM + SAP group was reduced to 6.09 ± 2.83% by the promotion of host angiogenesis and cardiac function was preserved, as demonstrated by a 54.25 ± 4.42% increase in the ejection fraction. This study indicates that combinatorial therapy with 3DCM and SAPs could be a promising strategy for therapeutic angiogenesis to treat MI. Copyright © 2016 John Wiley & Sons, Ltd.

Investigation of human cell response to covalently attached RADA16-I peptide on silicon surfaces

We described a modification of the ionic (RADARADARADARADA)(1) peptide or RADA16-I with 4-azidophenyl isothiocyanate via a specific and gentle reaction. The azidated peptide was covalently immobilized on an alkyne-terminated monolayer on Si(111) via the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction. Detailed characterization using Impedance spectroscopy (IS), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy demonstrated high coverage of the RADA 16-I peptide on silicon surfaces. Scanning electron microscopy (SEM) and methyl tetrazole sulfate (MTS) assay were used to characterize the morphology and proliferation ability of human fibroblast cells on surfaces. Cell adhesion assay was performed to examine cell-substrate interactions. Significant differences in fibroblast cell morphology, adhesion, and viability were observed on the RADA16-I peptide modified surfaces compared to the control surfaces. These results may suggest a potential application of RADA16-I peptide modified surfaces in biomedical applications.

RGD and BMP-2 mimetic peptide crosstalk enhances osteogenic commitment of human bone marrow stem cells

Human bone marrow mesenchymal stem cells (hBMSCs) commitment and differentiation are dictated by bioactive molecules sequestered within their Extra Cellular Matrix (ECM). One common approach to mimic the physiological environment is to functionalize biomaterial surfaces with ECM-derived peptides able to recruit stem cells and trigger their linage-specific differentiation. The objective of this work was to investigate the effect of RGD and BMP-2 ligands crosstalk and density on the extent of hBMSCs osteogenic commitment, without recourse to differentiation medium. RGD peptide promotes cell adhesion via cell transmembrane integrin receptors, while BMP-2 peptide, corresponding to residues 73-92 of Bone Morphogenetic Protein-2, was shown to induce hBMSCs osteoblast differentiation. The immobilization of peptides on aminated glass was ascertained by X-ray Photoelectron Spectroscopy (XPS), the density of grafted peptides was quantified by fluorescence microscopy and the surface roughness was evaluated using Atomic Force Microscopy (AFM). The osteogenic commitment of hBMSCs cultured on RGD and/or BMP-2 surfaces was characterized by immunohistochemistry using STRO-1 as specific stem cells marker and Runx-2 as an earlier osteogenic marker. Biological results showed that the osteogenic commitment of hBMSCs was enhanced on bifunctionalized surfaces as compared to surfaces containing BMP-2, while on RGD surfaces cells mainly preserved their stemness character. These results demonstrated that RGD and BMP-2 mimetic peptides act synergistically to enhance hBMSCs osteogenesis without supplementing the media with osteogenic factors. These findings contribute to the development of biomimetic materials, allowing a deeper understanding of signaling pathways that govern the transition of stem cells towards the osteoblastic lineage.

STATEMENT OF SIGNIFICANCE

For a long time, scientists thought that the differentiation of Mesenchymal Stem Cells (MSCs) into bone cells was dictated by growth factors. This manuscript shed light on other ligands that play a crucial role in regulating MSCs fate. In concrete terms, it was demonstrated that the osteoinductive effect of BMP-2 peptide is 2 folds improved in the presence of adhesive RGD peptide. Compared to previous works highlighting this synergistic cooperation between RGD and BMP-2 peptides, the main strength of this work lies to the use of primitive human cells (hMSCs) and well-defined biomimetic material surfaces (controlled surface roughness and peptide densities). This work provides valuable insights to develop custom-designed in vitro cell culture models, capable of targeting the desired cell response.

pH-Triggered Release of Hydrophobic Molecules from Self-Assembling Hybrid Nanoscaffolds

Self-assembling peptide based hydrogels have a wide range of applications in the field of tissue repair and tissue regeneration. Because of its physicochemical properties, (RADA)4 has been studied as a potential platform for 3D cell culture, drug delivery, and tissue engineering. Despite some small molecule and protein release studies with this system, there is a lack of work investigating the controlled release of hydrophobic compounds (i.e., anti-inflammatory, anticancer, antibacterial drugs, etc.) that are important for many clinical therapies. Attempts to incorporate hydrophobic compounds into self-assembling matrices usually inhibited nanofiber formation, rather resulting in a peptide-drug complex or microcrystal formation. Herein, a self-assembling chitosan/carboxymethyl-β-cyclodextrin nanoparticle system was used to load dexamethasone, which formed within a self-assembling (RADA)4 nanoscaffold matrix. Nanoparticles dispersed within the matrix were stabilized by the nanofibers within. The in vitro release of dexamethasone from the hybrid system was observed to be pH sensitive. At pH 7, release was observed for more than 8 days, with three distinct kinetic domains in the first 6 days. Data suggest that the deprotonation of chitosan at a solution pH > 6.8 leads to nanoparticle dissociation and ultimately the release of dexamethasone from the hybrid system. This system has the potential to form a multifunctional scaffold that can self-assemble with the ability to control the release of hydrophobic drugs for a wide variety of applications.

Self-assembling peptide-based delivery of therapeutics for myocardial infarction

Cardiovascular disease, including myocardial infarction, is the number one cause of death. Current treatments are palliative and slow the progression toward heart failure, but to not regenerate healthy tissue. Self-assembling peptides are biomimietic, readily produced, non-immunogenic and non-cytotoxic. They do not assemble into hydrogels until triggered, allowing them to be injected into the myocardium and providing opportunities for minimally invasive therapies. The ability to tune the mechanical and bioactive properties of self-assembling peptides will continue to make them readily adaptable for mimicking natural microenvironments. To date, a variety of growth factors and signaling moieties have been incorporated into self-assembling peptide hydrogels, enhancing cell behavior and tissue function. Furthermore, the hydrogels serve as delivery vehicles for cells in vivo and platforms for improved cell culture. In addition to a brief review of self-assembling peptides, we will discuss a variety of their approaches for myocardial infarction therapy. Moreover, we will assess approaches taken in other tissue and discuss how these could benefit therapies for myocardial infarction.

Structure–mechanical property correlations of hydrogel forming β-sheet peptides

This review discusses about β-sheet peptide structure at the molecular level and the bulk mechanical properties of the corresponding hydrogels.

Bioprinting synthetic self-assembling peptide hydrogels for biomedical applications

Three-dimensional (3D) bioprinting is a disruptive technology for creating organotypic constructs for high-throughput screening and regenerative medicine. One major challenge is the lack of suitable bioinks. Short synthetic self-assembling peptides are ideal candidates. Several classes of peptides self-assemble into nanofibrous hydrogels resembling the native extracellular matrix. This is a conducive microenvironment for maintaining cell survival and physiological function. Many peptides also demonstrate stimuli-responsive gelation and tuneable mechanical properties, which facilitates extrusion before dispensing and maintains the shape fidelity of the printed construct in aqueous media. The inherent biocompatibility and biodegradability bodes well for in vivo applications as implantable tissues and drug delivery matrices, while their short length and ease of functionalization facilitates synthesis and customization. By applying self-assembling peptide inks to bioprinting, the dynamic complexity of biological tissue can be recreated, thereby advancing current biomedical applications of peptide hydrogel scaffolds.

Cardiac differentiation potential of human induced pluripotent stem cells in a 3D self-assembling peptide scaffold

In the past decade, various strategies for cardiac reparative medicine involving stem cells from multiple sources have been investigated. However, the intra-cardiac implantation of cells with contractile ability may seriously disrupt the cardiac syncytium and de-synchronize cardiac rhythm. For this reason, bioactive cardiac implants, consisting of stem cells embedded in biomaterials that act like band aids, have been exploited to repair the cardiac wall after myocardial infarction. For such bioactive implants to function properly after transplantation, the choice of biomaterial is equally important as the selection of the stem cell source. While adult stem cells have shown promising results, they have various disadvantages including low proliferative potential in vitro, which make their successful usage in human transplants difficult. As a first step towards the development of a bioactive cardiac patch, we investigate here the cardiac differentiation properties of human induced pluripotent stem cells (hiPSCs) when cultured with and without ascorbic acid (AA) and when embedded in RAD16-I, a biomaterial commonly used to develop cardiac implants. In adherent cultures and in the absence of RAD16-I, AA promotes the cardiac differentiation of hiPSCs by enhancing the expression of specific cardiac genes and proteins and by increasing the number of contracting clusters. In turn, embedding in peptide hydrogel based on RAD16-I interferes with the normal cardiac differentiation progression. Embedded hiPSCs up-regulate genes associated with early cardiogenesis by up to 105 times independently of the presence of AA. However, neither connexin 43 nor troponin I proteins, which are related with mature cardiomyocytes, were detected and no contraction was noted in the constructs. Future experiments will need to focus on characterizing the mature cardiac phenotype of these cells when implanted into infarcted myocardia and assess their regenerative potential in vivo.

Biopolymers and supramolecular polymers as biomaterials for biomedical applications

Protein- and peptide-based structural biopolymers are abundant building blocks of biological systems. Either in their natural forms, such as collagen, silk or fibronectin, or as related synthetic materials they can be used in various technologies. An emerging area is that of biomimetic materials inspired by protein-based biopolymers, which are made up of small molecules rather than macromolecules and can therefore be described as supramolecular polymers. These materials are very useful in biomedical applications because of their ability to imitate the extracellular matrix both in architecture and their capacity to signal cells. This article describes important features of the natural extracellular matrix and highlight how these features are being incorporated into biomaterials composed of biopolymers and supramolecular polymers. We particularly focus on the structures, properties, and functions of collagen, fibronectin, silk, and the supramolecular polymers inspired by them as biomaterials for regenerative medicine.

Self-Assembled Proteins and Peptides as Scaffolds for Tissue Regeneration

Self-assembling proteins and peptides are increasingly gaining interest for potential use as scaffolds in tissue engineering applications. They self-organize from basic building blocks under mild conditions into supramolecular structures, mimicking the native extracellular matrix. Their properties can be easily tuned through changes at the sequence level. Moreover, they can be produced in sufficient quantities with chemical synthesis or recombinant technologies to allow them to address homogeneity and standardization issues required for applications. Here. recent advances in self-assembling proteins, peptides, and peptide amphiphiles that form scaffolds suitable for tissue engineering are reviewed. The focus is on a variety of motifs, ranging from minimalistic dipeptides, simplistic ultrashort aliphatic peptides, and peptide amphiphiles to large "recombinamer" proteins. Special emphasis is placed on the rational design of self-assembling motifs and biofunctionalization strategies to influence cell behavior and modulate scaffold stability. Perspectives for combination of these "bottom-up" designer strategies with traditional "top-down" biofabrication techniques for new generations of tissue engineering scaffolds are highlighted.

Development of a High-Throughput Ultrasound Technique for the Analysis of Tissue Engineering Constructs

Development of hydrogel-based tissue engineering constructs is growing at a rapid rate, yet translation to patient use has been sluggish. Years of costly preclinical tests are required to predict clinical performance and safety of these devices. The tests are invasive, destructive to the samples and, in many cases, are not representative of the ultimate in vivo scenario. Biomedical imaging has the potential to facilitate biomaterial development by enabling longitudinal noninvasive device characterization directly in situ. Among the various available imaging modalities, ultrasound stands out as an excellent candidate due to low cost, wide availability, and a favorable safety profile. The overall goal of this work was to demonstrate the utility of clinical ultrasound in longitudinal characterization of 3D hydrogel matrices supporting cell growth. Specifically, we developed a quantitative technique using clinical B-mode ultrasound to differentiate collagen content and fibroblast density within poly(ethylene glycol) (PEG) hydrogels and validated it in an in vitro phantom environment. By manipulating the hydrogel gelation, differences in ultrasound signal intensity were found between gels with collagen fibers and those with non-fiber forming collagen, indicating that the technique was sensitive to the configuration of the protein. At a collagen density of 2.5 mg/mL collagen, fiber forming collagen had a significantly increased signal intensity of 14.90 ± 2.58 × 10(-5) a.u. compared to non-fiber forming intensity at 2.74 ± 0.36 × 10(-5) a.u. Additionally, differences in intensity were found between living and fixed fibroblasts, with an increased signal intensity detected in living cells (5.00 ± 0.80 × 10(-5) a.u. in 1 day live cells compared to 2.26 ± 0.39 × 10(-5) a.u.in fixed cells at a concentration of 1 × 10(6) cells/mL in gels containing collagen). Overall, there was a linear correlation >0.90 for ultrasound intensity with increasing cell density. Results demonstrate the feasibility of using clinical ultrasound for characterization of PEG-based hydrogels in a tissue-mimicking phantom. The approach is clinically-relevant and could, with further validation, be utilized to nondestructively monitor in vivo performance of implanted tissue engineering scaffolds over time in preclinical and clinical settings.

Therapeutic effects of neuropeptide substance P coupled with self-assembled peptide nanofibers on the progression of osteoarthritis in a rat model

Osteoarthritis (OA) is a progressively degenerative disease that is accompanied by articular cartilage deterioration, sclerosis of the underlying bone and ultimately joint destruction. Although therapeutic medicine and surgical treatment are done to alleviate the symptoms of OA, it is difficult to restore normal cartilage function. Mesenchymal stem cell (MSC) transplantation is one of the therapeutic trials for treating OA due to its potential, and many researchers have recently reported on the effects of MSCs associated with OA therapy. However, cell transplantation has limitations including low stem cell survival rates, limited stem cell sources and long-term ex vivo culturing. In this study, we evaluated the efficacy of neuropeptide substance P coupled with self-assembled peptide hydrogels in a rat knee model to prevent OA by mobilizing endogenous MSCs to the defect site. To assess the effect of the optimal concentration of SP, varying concentrations of bioactive peptides (substance P (SP) with self-assembled peptide (SAP)) were used to treat OA. OA was induced by unilateral anterior cruciate and medial collateral ligament transection of the knee joints. Forty rats were randomly allocated into 5 groups: SAP-0.5SP (17.5 μg of SP), SAP-SP group (35 μg of SP), SAP-2SP group (70 μg of SP), SAP-SP-MSC group, and control group. At 2 weeks post-surgical induction of OA, each mixture was injected into the joint cavity of the left knee. Histologic examination, immunofluorescence staining, quantitative real time-polymerase chain reaction and micro-computed tomography analysis were done at 6 weeks post-surgical induction. As shown by our results, the SAP-SP hydrogel accelerated tissue regeneration by anti-inflammatory modulation shown by an anti-inflammation test using dot-blot in vitro. Additionally, the treatment of OA in the SAP-SP group showed markedly improved cartilage regeneration through the recruitment of MSCs. Thus, these cells could be infiltrating into the defect site for the regeneration of OA defects. In addition, from the behavioral studies on the rats, the number of rears significantly increased 2 and 4 weeks post-injection in all the groups. Our results show that bioactive peptides may have clinical potential for inhibiting the progression of OA as well as its treatment by recruiting autologous stem cells without cell transplantation.

Beta-Sheet-Forming, Self-Assembled Peptide Nanomaterials towards Optical, Energy, and Healthcare Applications

Peptide self-assembly is an attractive route for the synthesis of intricate organic nanostructures that possess remarkable structural variety and biocompatibility. Recent studies on peptide-based, self-assembled materials have expanded beyond the construction of high-order architectures; they are now reporting new functional materials that have application in the emerging fields such as artificial photosynthesis and rechargeable batteries. Nevertheless, there have been few reviews particularly concentrating on such versatile, emerging applications. Herein, recent advances in the synthesis of self-assembled peptide nanomaterials (e.g., cross β-sheet-based amyloid nanostructures, peptide amphiphiles) are selectively reviewed and their new applications in diverse, interdisciplinary fields are described, ranging from optics and energy storage/conversion to healthcare. The applications of peptide-based self-assembled materials in unconventional fields are also highlighted, such as photoluminescent peptide nanostructures, artificial photosynthetic peptide nanomaterials, and lithium-ion battery components. The relation of such functional materials to the rapidly progressing biomedical applications of peptide self-assembly, which include biosensors/chips and regenerative medicine, are discussed. The combination of strategies shown in these applications would further promote the discovery of novel, functional, small materials.

From Single Cells to Engineered and Explanted Tissues: New Perspectives in Bacterial Infection Biology

Cell culture techniques are essential for studying host-pathogen interactions. In addition to the broad range of single cell type-based two-dimensional cell culture models, an enormous amount of coculture systems, combining two or more different cell types, has been developed. These systems enable microscopic visualization and molecular analyses of bacterial adherence and internalization mechanisms and also provide a suitable setup for various biochemical, immunological, and pharmacological applications. The implementation of natural or synthetical scaffolds elevated the model complexity to the level of three-dimensional cell culture. Additionally, several transwell-based cell culture techniques are applied to study bacterial interaction with physiological tissue barriers. For keeping highly differentiated phenotype of eukaryotic cells in ex vivo culture conditions, different kinds of microgravity-simulating rotary-wall vessel systems are employed. Furthermore, the implementation of microfluidic pumps enables constant nutrient and gas exchange during cell cultivation and allows the investigation of long-term infection processes. The highest level of cell culture complexity is reached by engineered and explanted tissues which currently pave the way for a more comprehensive view on microbial pathogenicity mechanisms.

Peptide Hydrogels - Versatile Matrices for 3D Cell Culture in Cancer Medicine

Traditional two-dimensional (2D) cell culture systems have contributed tremendously to our understanding of cancer biology but have significant limitations in mimicking in vivo conditions such as the tumor microenvironment. In vitro, three-dimensional (3D) cell culture models represent a more accurate, intermediate platform between simplified 2D culture models and complex and expensive in vivo models. 3D in vitro models can overcome 2D in vitro limitations caused by the oversupply of nutrients, and unphysiological cell-cell and cell-material interactions, and allow for dynamic interactions between cells, stroma, and extracellular matrix. In addition, 3D cultures allow for the development of concentration gradients, including oxygen, metabolites, and growth factors, with chemical gradients playing an integral role in many cellular functions ranging from development to signaling in normal epithelia and cancer environments in vivo. Currently, the most common matrices used for 3D culture are biologically derived materials such as matrigel and collagen. However, in recent years, more defined, synthetic materials have become available as scaffolds for 3D culture with the advantage of forming well-defined, designed, tunable materials to control matrix charge, stiffness, porosity, nanostructure, degradability, and adhesion properties, in addition to other material and biological properties. One important area of synthetic materials currently available for 3D cell culture is short sequence, self-assembling peptide hydrogels. In addition to the review of recent work toward the control of material, structure, and mechanical properties, we will also discuss the biochemical functionalization of peptide hydrogels and how this functionalization, coupled with desired hydrogel material characteristics, affects tumor cell behavior in 3D culture.

Vaccine self-assembling immune matrix is a new delivery platform that enhances immune responses to recombinant HBsAg in mice

Vaccination remains the most effective public health tool to prevent infectious diseases. Many vaccines are marginally effective and need enhancement for immunocompromised, elderly, and very young populations. To enhance immunogenicity, we exploited the biphasic property of the (RADA)4 synthetic oligopeptide to create VacSIM (vaccine self-assembling immune matrix), a new delivery method. VacSIM solution can easily be mixed with antigens, organisms, and adjuvants for injection. Postinjection, the peptides self-assemble into hydrated nanofiber gel matrices, forming a depot with antigens and adjuvants in the aqueous phase. We believe the depot provides slow release of immunogens, leading to increased activation of antigen-presenting cells that then drive enhanced immunogenicity. Using recombinant hepatitis B virus surface antigen (rHBsAg) as a model immunogen, we compared VacSIM delivery to delivery in alum or complete Freund's adjuvant (CFA). Delivery of the rHBsAg antigen to mice via VacSIM without adjuvant elicited higher specific IgG responses than when rHBsAg was delivered in alum or CFA. Evaluating IgG subtypes showed a mixed Th1/Th2 type response following immunization with VacSIM, which was driven further toward Th1 with addition of CpG as the adjuvant. Increased specific IgG endpoint titers were observed in both C57BL/6 and BALB/c mice, representative of Th1 and Th2 environments, respectively. Restimulation of splenocytes suggests that VacSIM does not cause an immediate proinflammatory response in the host. Overall, these results suggest that VacSIM, as a new delivery method, has the potential to enhance immunogenicity and efficacy of numerous vaccines.

Decoration of PLGA electrospun nanofibers with designer self-assembling peptides: a “Nano-on-Nano” concept

A composite neural scaffold which combines the topographical features of electrospun nanofibrous scaffolds and bioactive as well as nanostructured features of designer self-assembling peptides (“Nano on Nano” approach).

Biomimetic approaches to complex craniofacial defects

The primary goals of craniofacial reconstruction include the restoration of the form, function, and facial esthetics, and in the case of pediatric patients, respect for craniofacial growth. The surgeon, however, faces several challenges when attempting a reconstructive cranioplasty. For that reason, craniofacial defect repair often requires sophisticated treatment strategies and multidisciplinary input. In the ideal situation, autologous tissue similar in structure and function to that which is missing can be utilized for repair. In the context of the craniofacial skeleton, autologous cranial bone, or secondarily rib, iliac crest, or scapular bone, is most favorable. Often, this option is limited by the finite supply of available bone. Therefore, alternative strategies to repair craniofacial defects are necessary. In the field of regenerative medicine, tissue engineering has emerged as a promising concept, and several methods of bone engineering are currently under investigation. A growth factor-based approach utilizing bone morphogenetic proteins (BMPs) has demonstrated stimulatory effects on cranial bone and defect repair. When combined with cell-based and matrix-based models, regenerative goals can be optimized. This manuscript intends to review recent investigations of tissue engineering models used for the repair of craniofacial defects with a focus on the role of BMPs, scaffold materials, and novel cell lines. When sufficient autologous bone is not available, safe and effective strategies to engineer bone would allow the surgeon to meet the reconstructive goals of the craniofacial skeleton.

Controlled chondrogenesis from adipose-derived stem cells by recombinant transforming growth factor-β3 fusion protein in peptide scaffolds

Adipose-derived stem cells (ADSCs) are promising for cartilage repair due to their easy accessibility and chondrogenic potential. Although chondrogenesis of transforming growth factor-β (TGF-β) mediated mesenchymal stem cells (MSCs) is well established in vitro, clinical tissue engineering requires effective and controlled delivery of TGF-β in vivo. In this work, a self-assembled peptide scaffold was employed to construct cartilages in vivo through the chondrogenesis from ADSCs controlled by recombinant fusion protein LAP-MMP-mTGF-β3 that was transfected by lentiviral vectors. During this course, the addition of matrix metalloproteinases (MMPs) can trigger the release of mTGF-β3 from the recombinant fusion protein of LAP-MMP-mTGF-β3 in the combined scaffolds, thus stimulating the differentiation of ADSCs into chondrogenesis. The specific expression of cartilage genes was analyzed by real-time polymerase chain reaction and Western blot. The expression of chondrocytic markers was obviously upregulated to a higher level compared to the one by commonly used TGF-β3 alone. After 3 weeks of in vitro culturing, the hybrids with differentiated chondrogenesis were then injected subcutaneously into nude mice and retrieved after 4 weeks of culturing in vivo. Histological analysis also confirmed that the recombinant fusion protein was more effective for the formation of cartilage matrix than the cases either with TGF-β3 alone or without LAP-MMP-mTGF-β3 (P<0.05). This study demonstrates that controlled local delivery of the LAP-MMP-mTGF-β3 constructs can accelerate differentiation of ADSCs into the cartilage in vivo, which indicates the great potential of this hybrid in rapid therapy of osteoarthritis.

Peptide-directed self-assembly of functionalized polymeric nanoparticles. Part II: effects of nanoparticle composition on assembly behavior and multiple drug loading ability

Peptide-functionalized polymeric nanoparticles were designed and self-assembled into continuous nanoparticle fibers and three-dimensional scaffolds via ionic complementary peptide interaction. Different nanoparticle compositions can be designed to be appropriate for each desired drug, so that the release of each drug is individually controlled and the simultaneous sustainable release of multiple drugs is achieved in a single scaffold. A self-assembled scaffold membrane was incubated with NIH3T3 fibroblast cells in a culture dish that demonstrated non-toxicity and non-inhibition on cell proliferation. This type of nanoparticle scaffold combines the advantages of peptide self-assembly and the versatility of polymeric nanoparticle controlled release systems for tissue engineering.

Bioactive copper-doped glass scaffolds can stimulate endothelial cells in co-culture in combination with mesenchymal stem cells

Bioactive glass (BG) scaffolds are being investigated for bone tissue engineering applications because of their osteoconductive and angiogenic nature. However, to increase the in vivo performance of the scaffold, including enhancing the angiogenetic growth into the scaffolds, some researchers use different modifications of the scaffold including addition of inorganic ionic components to the basic BG composition. In this study, we investigated the in vitro biocompatibility and bioactivity of Cu2+-doped BG derived scaffolds in either BMSC (bone-marrow derived mesenchymal stem cells)-only culture or co-culture of BMSC and human dermal microvascular endothelial cells (HDMEC). In BMSC-only culture, cells were seeded either directly on the scaffolds (3D or direct culture) or were exposed to ionic dissolution products of the BG scaffolds, kept in permeable cell culture inserts (2D or indirect culture). Though we did not observe any direct osteoinduction of BMSCs by alkaline phosphatase (ALP) assay or by PCR, there was increased vascular endothelial growth factor (VEGF) expression, observed by PCR and ELISA assays. Additionally, the scaffolds showed no toxicity to BMSCs and there were healthy live cells found throughout the scaffold. To analyze further the reasons behind the increased VEGF expression and to exploit the benefits of the finding, we used the indirect method with HDMECs in culture plastic and Cu2+-doped BG scaffolds with or without BMSCs in cell culture inserts. There was clear observation of increased endothelial markers by both FACS analysis and acetylated LDL (acLDL) uptake assay. Only in presence of Cu2+-doped BG scaffolds with BMSCs, a high VEGF secretion was demonstrated by ELISA; and typical tubular structures were observed in culture plastics. We conclude that Cu2+-doped BG scaffolds release Cu2+, which in turn act on BMSCs to secrete VEGF. This result is of significance for the application of BG scaffolds in bone tissue engineering approaches.