Wound-dressing materials with antibacterial activity from electrospun polyurethane-dextran nanofiber mats containing ciprofloxacin HCl

Four Natural Compounds Separated from Folium Isatidis: Crystal Structures and Antibacterial Activity

Four natural compounds were obtained by concentrating, separating and purifying from the Folium isatidis. These natural compounds have been characterized by elemental analysis, IR spectrum, NMR and single-crystal X-ray diffraction analysis. The results show that these natural compounds are 4(3H)-quinazolinone (I), 2,4(1H,3H)-quinazolinedione (II), methyl 3,4-dihydro-4-oxoquinazoline-2-carboxylate (III) and ethyl 3,4-dihydro-4-oxoquinazoline-2-carboxylate (IV). The antibacterial activity experiment showed that I and II had better activity against Staphylococcus aureus, Escherichia coli, Bacillus subtilis and Salmonella than III, IV and other multiple components, because III and IV have long branches and steric hindrance effect. Compounds I and II have planar structure, which can more easily combine with these bacteria and kill them. The above results have good guiding significance for studying the antibacterial activity for single components or mixtures from natural origin.

Overview of Silk Fibroin Use in Wound Dressings

Recently, biomimetic wound dressings were introduced as potential replacements for treating skin injuries. Although there are some clinically available skin replacements, the range of wound types and locations necessitates a broader range of options for the clinic. Natural polymeric-based dressings are of central interest in this area due to their outstanding biocompatibility, biodegradability, low toxicity, and non-allergenic nature. Among them, silk fibroin (SF) has exceptional characteristics as a wound dressing. SF-based dressings can also be used as carriers for delivering drugs, growth factors, and bioactive agents to the wound area, while providing appropriate support for complete healing. In this review, we describe recent advances in the development of SF-based wound dressings for skin regeneration.

Electrospun polymeric nanofibres as wound dressings: A review

Skin wounds have significant morbidity and mortality rates associated. This is explained by the limited effectiveness of the currently available treatments, which in some cases do not allow the reestablishment of the structure and functions of the damaged skin, leading to wound infection and dehydration. These drawbacks may have an impact on the healing process and ultimately prompt patients' death. For this reason, researchers are currently developing new wound dressings that enhance skin regeneration. Among them, electrospun polymeric nanofibres have been regarded as promising tools for improving skin regeneration due to their structural similarity with the extracellular matrix of normal skin, capacity to promote cell growth and proliferation and bactericidal activity as well as suitability to deliver bioactive molecules to the wound site. In this review, an overview of the recent studies concerning the production and evaluation of electrospun polymeric nanofibrous membranes for skin regenerative purposes is provided. Moreover, the current challenges and future perspectives of electrospun nanofibrous membranes suitable for this biomedical application are highlighted.

Polymer-Based Electrospun Nanofibers for Biomedical Applications

Electrospinning has been considered a promising and novel procedure to fabricate polymer nanofibers due to its simplicity, cost effectiveness, and high production rate, making this technique highly relevant for both industry and academia. It is used to fabricate non-woven fibers with unique characteristics such as high permeability, stability, porosity, surface area to volume ratio, ease of functionalization, and excellent mechanical performance. Nanofibers can be synthesized and tailored to suit a wide range of applications including energy, biotechnology, healthcare, and environmental engineering. A comprehensive outlook on the recent developments, and the influence of electrospinning on biomedical uses such as wound dressing, drug release, and tissue engineering, has been presented. Concerns regarding the procedural restrictions and research contests are addressed, in addition to providing insights about the future of this fabrication technique in the biomedical field.

Biomaterials for Skin Substitutes

Patients with extensive burns rely on the use of tissue engineered skin due to a lack of sufficient donor tissue, but it is a challenge to identify reliable and economical scaffold materials and donor cell sources for the generation of a functional skin substitute. The current review attempts to evaluate the performance of the wide range of biomaterials available for generating skin substitutes, including both natural biopolymers and synthetic polymers, in terms of tissue response and potential for use in the operating room. Natural biopolymers display an improved cell response, while synthetic polymers provide better control over chemical composition and mechanical properties. It is suggested that not one material meets all the requirements for a skin substitute. Rather, a composite scaffold fabricated from both natural and synthetic biomaterials may allow for the generation of skin substitutes that meet all clinical requirements including a tailored wound size and type, the degree of burn, the patient age, and the available preparation technique. This review aims to be a valuable directory for researchers in the field to find the optimal material or combination of materials based on their specific application.

Calcium alginate-based antimicrobial film dressings for potential healing of infected foot ulcers

Aim: Diabetic foot ulcers are susceptible to infection and nonmedicated dressings are ineffective because they have no antimicrobial activity. This study aimed to develop antimicrobial films to deliver ciprofloxacin for treating bacterial infection. Results/methodology: Ciprofloxacin-loaded calcium alginate films were characterized for porosity, swelling, equilibrium water content, water absorption, water vapor transmission, evaporative water loss, moisture content, mechanical strength, adhesion, IR spectroscopy, scanning electron microscopy, x-ray diffraction, drug release, cytotoxicity and antimicrobial activity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa. Films were transparent, flexible, uniform, with ideal moisture handling, maximum drug release within 90 min, killing bacteria within 24 h and highly biocompatible with human keratinocyte cells. Conclusion: The results confirmed successful design of biocompatible dressings effective against Gram-positive and Gram-negative bacteria.

[Formula: see text]

Design and characterization of clindamycin-loaded nanofiber patches composed of polyvinyl alcohol and tamarind seed gum and fabricated by electrohydrodynamic atomization

In this study, we developed a polymeric nanofiber patch (PNP) for topical disease treatment using electrohydrodynamic atomization (EHDA). The nanofibers were prepared using various concentrations of polyvinyl alcohol (PVA) and tamarind seed gum and loaded with clindamycin HCl as a model drug. The precursor polymer solutions were sprayed using the EHDA technique; the EHDA processing parameters were optimized to obtain blank and drug-loaded PNPs. The skin adherence, translucence, and ventilation properties of the prepared PNPs indicated that they are appropriate for topical application. The conductivity of the polymer solution increased with increasing PVA and clindamycin concentrations, and increasing the PVA concentration enhanced the solution viscosity. Based on scanning electron microscopy analysis, the PVA concentration had a pronounced effect on the morphology of the sprayed product. Nanofibers were fabricated successfully when the solution PVA concentration was 10%, 13%, or 15% (w/v). The applied voltage significantly affected the diameters of the prepared nanofibers, and the minimum nanofiber diameter was 163.86 nm. Differential scanning calorimetry and X-ray diffraction analyses indicated that the model drug was dispersed in PVA in an amorphous form. The PNP prepared with a PVA:gum ratio of 9:1 absorbed water better than the PVA-only PNP and the PNP with a PVA:gum ratio of 9.5:0.5. Moreover, the PNPs loaded with clindamycin at concentrations of 1%–3% prohibited the growth of Staphylococcus aureus more effectively than clindamycin gel, a commercially available product.

Fabrication of polytetrafluoroethylene nanofibrous membranes for guided bone regeneration

In this study, we first prepared the precursor polytetrafluoroethylene (PTFE)/poly(ethylene oxide) (PEO) nanofibrous membranes by electrospinning with different PTFE/PEO weight ratios. These membranes exhibited three-dimensional interconnected pore structures. The average diameter of the precursor nanofibres decreased with increased PTFE contents from 633 ± 34 nm (PTFE/PEO weight ratio of 5 : 1) to 555 ± 63 nm (PTFE/PEO weight ratio of 7 : 1) because of the decrease in solution viscosity. Then, the precursor membranes were sintered with different temperatures to obtain the PTFE nanofibrous membranes, resulting in the average diameter of the nanofibres increasing from 633 ± 34 nm to 947 ± 78 nm with the increase in sintering temperature; consequently, the membrane became more compact. This compaction caused a decrease in porosity from 76.5 ± 2.9% to 69.1 ± 2.6% and an increase in water contact angle from 94.1 ± 4.2° to 143.3 ± 3.5°. In addition, the mechanical properties of the PTFE nanofibrous membranes increased with increasing sintering temperature. Cytocompatibility test results revealed that the PTFE350 membrane, which was sintered at 350 °C, promoted the proliferation and differentiation of MC3T3-E1 cells more rapidly than other membrane types. These results suggested that the PTFE nanofibrous membranes could be ideal biomaterials in tissue engineering for bone regeneration.

In this study, PTFE nanofibrous membranes were fabricated by sintering the previously electrospun polytetrafluoroethylene (PTFE)/poly(ethylene oxide) (PEO) nanofibrous membranes.

Antibacterial coordination polymer hydrogels composed of silver(i)-PEGylated bisimidazolylbenzyl alcohol

Herein, antibacterial coordination polymer hydrogels were conveniently fabricated in water via coordination between silver nitrate and PEGylated bisimidazolylbenzyl alcohol (1a–c).

Surface, thermal and hemocompatible properties of novel single stage electrospun nanocomposites comprising polyurethane blended with bio oilTM

In this work, the physicochemical and blood compatibility properties of prepared PU/Bio oil nanocomposites were investigated. Scanning electron microscope (SEM) studies revealed the reduction of mean fiber diameter (709 ± 211 nm) compared to the pristine PU (969 nm ± 217 nm). Fourier transform infrared spectroscopy (FTIR) analysis exposed the characteristic peaks of pristine PU. Composite peak intensities were decreased insinuating the interaction of the bio oilTM with the PU. Contact angle analysis portrayed the hydrophobic nature of the fabricated patch compared to pristine PU. Thermal gravimetric analysis (TGA) depicted the better thermal stability of the novel nanocomposite patch and its different thermal behavior in contrast with the pristine PU. Atomic force microscopy (AFM) analysis revealed the increase in the surface roughness of the composite patch. Activated partial thromboplastin time (APTT) and prothrombin time (PT) signified the novel nanocomposite patch ability in reducing the thrombogenicity and promoting the anticoagulant nature. Finally the hemolytic percentage of the fabricated composite was in the acceptable range revealing its safety and compatibility with the red blood cells. To reinstate, the fabricated patch renders promising physicochemical and blood compatible nature making it a new putative candidate for wound healing application.

Fiber Alignment and Liquid Crystal Orientation of Cellulose Nanocrystals in the Electrospun Nanofibrous Mats

Sulfate cellulose nanocrystal (CNC) dispersions always present specific self-assembled cholesteric mesophases which is easily affected by the inherent properties of particle size, surface charge, and repulsion or affinity interaction, and external field force generated from ionic potential of added electrolytes, magnetic or electric field, and mechanical shearing or stretching. Aiming at understanding the liquid crystal orientation and fiber alignment under high-voltage electric field, randomly distributed, uniform-aligned, or core-sheath nanofibrous mats involving charged CNCs and PVA were electrospun; and among them, specific straight arrayed fine nanofibers with average diameter of 270 nm were manufactured by using a simple and versatile gap collector. Moreover, arrayed composite nanofibers regularly aligned along the vertical direction of gap plates and selectively reflected frequent and continuous birefringence which was regarded as nematic phases of CNCs induced by the uniaxial stretching under high-voltage electric field. As a synergic effect of rigidness of nanocrystals and stretching orientation of nematic phases, the aligned nanofibrous arrays exhibited a higher tensile strength and strain than the randomly oriented or core-sheath nanofibrous mats at the same loading of CNCs. By contrast, mesophase transition of CNCs from cholesteric to nematic occurred in the coaxially spun core-sheath nanofibers at a loss of long-ranged chiral twist. Hence, the structure-effect relationship between liquid crystal orientation of charged nanorods in polymer-based fine nanofibers and the flexibility or mechanical integrity of the aligned fiber array will be favorable for strategic development of functional liquid crystal fabrics.

Development, Optimization and In Vitro/In Vivo Characterization of Collagen-Dextran Spongious Wound Dressings Loaded with Flufenamic Acid

The aim of this study was the development and optimization of some topical collagen-dextran sponges with flufenamic acid, designed to be potential dressings for burn wounds healing. The sponges were obtained by lyophilization of hydrogels based on type I fibrillar collagen gel extracted from calf hide, dextran and flufenamic acid, crosslinked and un-crosslinked, and designed according to a 3-factor, 3-level Box-Behnken experimental design. The sponges showed good fluid uptake ability quantified by a high swelling ratio. The flufenamic acid release profiles from sponges presented two stages—burst effect resulting in a rapid inflammation reduction, and gradual delivery ensuring the anti-inflammatory effect over a longer burn healing period. The resistance to enzymatic degradation was monitored through a weight loss parameter. The optimization of the sponge formulations was performed based on an experimental design technique combined with response surface methodology, followed by the Taguchi approach to select those formulations that are the least affected by the noise factors. The treatment of experimentally induced burns on animals with selected sponges accelerated the wound healing process and promoted a faster regeneration of the affected epithelial tissues compared to the control group. The results generated by the complex sponge characterization indicate that these formulations could be successfully used for burn dressing applications.

Electrospun Gelatin/poly(Glycerol Sebacate) Membrane with Controlled Release of Antibiotics for Wound Dressing

BACKGROUND

The most important risk that threatens the skin wounds is infections. Therefore, fabrication of a membrane as a wound dressing with the ability of antibiotic delivery in a proper delivery rate is especially important.

MATERIALS AND METHODS

Poly(glycerol sebacate) (PGS) was prepared from sebacic acid and glycerol with 1:1 ratio; then, it was added to gelatin in the 1:3 ratio and was dissolved in 80% (v/v) acetic acid, and finally, ciprofloxacin was added in 10% (w/v) of polymer solution. The gelatin/PGS membrane was fabricated using an electrospinning method. The membrane was cross-linked using ethyl-3-(3-dimethylaminopropyl) carbodiimide ethyl-3-(3-dimethylaminopropyl)carbodiim (EDC) and N-hydroxysuccinimide (NHS) in different time periods to achieve a proper drug release rate. Fourier-transform infrared (FTIR) spectroscopy was being used to manifest the peaks of polymers and drug in the membrane. Scanning electron microscopy (SEM) was used to evaluate the morphology, fibers diameter, pore size, and porosity before and after crosslinking process. Ultraviolet (UV)-visible spectrophotometry was used to show the ciprofloxacin release from the cross-linked membrane.

RESULTS

FTIR analysis showed the characteristic peaks of gelatin, PGS, and ciprofloxacin without any added peaks after the crosslinking process. SEM images revealed that nanofibers' size increased during the crosslinking process and porosity was higher than 80% before and after crosslinking process. UV-visible spectrophotometry showed the proper rate of ciprofloxacin release occurred from cross-linked membrane that remaining in EDC/NHS ethanol solution for 120 min.

CONCLUSION

The obtained results suggest that this recently developed gelatin/PGS membrane with controlled release of ciprofloxacin could be a promising biodegradable membrane for wound dressing.

New polylactic acid/ cellulose acetate-based antimicrobial interactive single dose nanofibrous wound dressing mats

New single dose interactive extracellular matrix (ECM) mimicking nanofibrous wound dressings based on polylactic acid (PLA) and cellulose acetate (CA) were developed, characterized and investigated for wound treatment. The antimicrobial agent, thymoquinone (TQ) was selected and incorporated into the scaffolds for preventing common clinical infections, and to accelerate the rate of wound closure and re-epithelialization. The newly fabricated TQ-loaded PLA/CA wound dressings offered many advantages such as mimicking the ECM via the 3D nanofibrous structure, and promoted the cell proliferation due to the hydrophilicity and bioactivity of CA. The wound dressings also prevented the bacterial infection in the early stages due to presence of TQ, and maintained the minimum possible bacterial load in the wound area through the sustained release of the drug for 9days. In vivo assessment demonstrated that TQ-loaded PLA: CA (7:3) scaffolds significantly promoted the wound healing process by increasing re-epithelialization and controlling the formation of granulation tissue. The obtained results suggest that the developed TQ-loaded PLA/CA nanofibrous mats could be ideal for wound dressing applications.

Multifunctional colloidal nanofiber composites including dextran and folic acid as electro-active platforms

This work presents the fabrication and characterization of novel colloidal multifunctional polymer nanofiber composites (NFCs) from water dispersion blends of intercalated silicate layered nanocomposites of poly (2-vinyl-N-pyrrolidone)/octadecyl amine-montmorillonite (ODA-MMT) and dextran/ODA-MMT as matrix and partner polymer intercalated nanocomposites in the presence of NaOH and folic acid (FA) as doping agents by green reactive electrospinning. Chemical and physical structures, surface morphology and electrical properties were investigated. Effects of matrix/partner polymer ratios, doping agents, absorption time of NaOH, and temperature on electrical parameters of NFCs were evaluated. The presence of FA and increasing dextran fraction in NFCs resulted in reducing fiber diameter and improving diameter distribution. High complexing behaviors of matrix/partner polymer chains, organoclay, FA, and NaOH significantly improved conductivity parameters, especially 5-min of absorption time (≈10^-2-10^-3Sm^-1). The conductivity of the samples decreased with increasing temperature. NFCs fabricated for the first time are promising candidates for various biomedical, electrochemical and electronic applications as electro-active platforms.

Recent advances in electrospun nanofibers for wound healing

Electrospun nanofibers represent a novel class of materials that show great potential in many biomedical applications including biosensing, regenerative medicine, tissue engineering, drug delivery and wound healing. In this work, we review recent advances in electrospun nanofibers for wound healing. This article begins with a brief introduction on the wound, and then discusses the unique features of electrospun nanofibers critical for wound healing. It further highlights recent studies that have used electrospun nanofibers for wound healing applications and devices, including sutures, multifunctional dressings, dermal substitutes, engineered epidermis and full-thickness skin regeneration. Finally, we finish with conclusions and future perspective in this field.

Polyurethane-silica hybrid foams from a one-step foaming reaction, coupled with a sol-gel process, for enhanced wound healing

Polyurethane (PU)-based dressing foams have been widely used due to their excellent water absorption capability, optimal mechanical properties, and unequaled economic advantage. However, the low bioactivity and poor healing capability of PU limit the applications of PU dressings in complex wound healing cases. To resolve this problem, this study was carried out the hybridization of bioactive silica nanoparticles with PU through a one-step foaming reaction that is coupled with the sol-gel process. The hybridization with silica did not affect the intrinsically porous microstructure of PU foams with silica contents of up to 10wt% and where 5-60nm silica nanoparticles were well dispersed in the PU matrix, despite slight agglomerations. The incorporated silica enhanced the mechanical performance of PU by proffering better flexibility and durability as well as maintaining good water absorption capabilities and the WVTR characteristics of pure PU foam. The silica of PU-10wt% Si foams was gradually dissolved and released under physiological conditions during a 14-day immersion period. The in vitro cell attachment and proliferation tests showed significant improvements in terms of the biocompatibility of PU-Si hybrid foams and demonstrated the effects of silica on cell growth. More significantly, the superior healing capability of PU-Si as a wound dressing in comparison to PU-treated wounds was verified through in vivo animal tests. Full-thickness wounds treated with PU-Si foams exhibited faster wound closure rates as well as accelerated collagen and elastin fiber regeneration in newly formed dermis, which was ultimately completely covered by a new epithelial layer. It is clear that PU-Si hybrid foams have considerable potential as a wound dressing material geared for accelerated, superior wound healing.

Functionalization of electrospun polymeric wound dressings with antimicrobial peptides

Wound dressings have evolved considerably since ancient times. Modern dressings are now important systems that combine the physical and biochemical properties of natural and synthetic polymers with active compounds that are beneficial to wound healing. Antimicrobial peptides (AMPs) are the most recent addition to these systems. These aim to control the microbial proliferation and colonization of pathogens and to modulate the host's immune response. In the last decade, electrospun wound dressings have been extensively studied and the electrospinning technique recognized as an efficient approach for the production of nanoscale fibrous mats. The control of the electrospinning processing parameters, the selection of the polymer and AMPs, and the definition of the most appropriate AMPs' functionalization method contribute to the successful treatment of acute and chronic wounds. Although the use of electrospinning in wound dressings' production has been previously reviewed, the increased development of AMPs and the establishment of functionalization methods for wound dressings over recent years has increased the need for such research. In the present review, we approach all these subjects and reveal the promising therapeutic potential of wound dressings functionalized with AMPs.

Tetracycline hydrochloride-loaded electrospun nanofibers mats based on PVA and chitosan for wound dressing

Fibrous mats built from biopolymer have been extensively explored for tissue engineering due mainly to their mimic structure to the extracellular matrix. The incorporation of drug in such scaffolds represents a growing interest for control drug delivery system in order to promote the tissue repair. In the present work, we present an experimental investigation of morphological, thermal, mechanical, drug release, antibacterial and cytotoxicity properties of electrospun PVA/Chitosan and PVA/Chitosan/Tetracycline hydrochloride (TCH) mats for wound dressing. Fibrous mats with cross-linked three-dimensional nanofibers were formed from the polymer blends. A uniform incorporation of drug was achieved along the nanofibers with not significant change on the morphological and thermal properties of the mats. Furthermore, the TCH release profile with a burst delivery during the first 2h allows an effective antibacterial activity on the Gram-negative Escherichia coli as well as on the Gram-positive Staphylococci epidermidis and Staphylococcus aureus. In vitro indirect MTT assay also showed that the developed drug-loaded nanofibrous scaffolds have good cytocompatibility, which was confirmed by scratch assay, indicating that the investigated scaffold may be used as antibacterial wound dressing for healing promotion.

Antimicrobial Polymers in the Nano-World

Infections are one of the main concerns of our era due to antibiotic-resistant infections and the increasing costs in the health-care sector. Within this context, antimicrobial polymers present a great alternative to combat these problems since their mechanisms of action differ from those of antibiotics. Therefore, the microorganisms' resistance to these polymeric materials is avoided. Antimicrobial polymers are not only applied in the health-care sector, they are also used in many other areas. This review presents different strategies that combine nanoscience and nanotechnology in the polymer world to combat contaminations from bacteria, fungi or algae. It focuses on the most relevant areas of application of these materials, viz. health, food, agriculture, and textiles.

Electrospun polyurethane nanofiber scaffolds with ciprofloxacin oligomer versus free ciprofloxacin: Effect on drug release and cell attachment

An electrospun degradable polycarbonate urethane (PCNU) nanofiber scaffold loaded with antibiotic was investigated in terms of antibacterial efficacy and cell compatibility for potential use in gingival tissue engineering. Antimicrobial oligomer (AO), a compound which consists of two molecules of ciprofloxacin (CF) covalently bound via hydrolysable linkages to triethylene glycol (TEG), was incorporated via a one-step blend electrospinning process using a single solvent system at 7 and 15% w/w equivalent CF with respect to the PCNU. The oligomeric form of the drug was used to overcome the challenge of drug aggregation and burst release when antibiotics are incorporated as free drug. Electrospinning parameters were optimized to obtain scaffolds with similar alignment and fiber diameter to non-drug loaded fibers. AO that diffused from the fibers was hydrolysed to release CF slowly and in a linear manner over the duration of the study, whereas scaffolds with CF at the same concentration but in free form showed a burst release within 1h with no further release throughout the study duration. Human gingival fibroblast (HGF) adhesion and spreading was dependent on the concentration and form the CF was loaded (AO vs. free CF), which was attributed in part to differences in scaffold surface chemistry. Surface segregation of AO was quantified using surface-resolved X-ray photoelectron spectroscopy (XPS). These findings are encouraging and support further investigation for the use of AO as a means of attenuating the rapid release of drug loaded into nanofibers. The study also demonstrates through quantitative measures that drug additives have the potential to surface-locate without phase separating from the fibers, leading to fast dissolution and differential fibroblast cell attachment.

Nano silver-embedded electrospun nanofiber of poly(4-chloro-3-methylphenyl methacrylate): use as water sanitizer

Water contaminated with microorganisms causes numerous diseases and is a major concern for public health. In search of a simple material which can provide clean water free from pathogens, nanofibers of poly(4-chloro-3-methylphenyl methacrylate, abbreviated as CMPMA, and nano Ag-doped poly(CMPMA) composite nanofibers were used to decontaminate water from microorganisms such as Escherichia coli and Bacillus subtilis. Nanofibers were prepared by electrospinning. X-ray diffraction (XRD) and transmission electron microscopy (TEM) provide the diameters of the Ag nanoparticles which are in the range 18-21 and 13-18 nm. The diameter of the poly(CMPMA) and nano Ag-doped poly(CMPMA) composite nanofiber is seen to vary between 400 and 700 nm with the change of the processing parameters. Optimum parameters for uniform nanofibers have been obtained. The morphology of the fibers is derived from scanning electron microscopy (SEM). The superiority of the nano Ag-doped poly(CMPMA) composite nanofiber was established.

Starch-based and multi-purpose nanofibrous membrane for high efficiency nanofiltration

The objective of the present work is to develop nanofibrous membranes from rice-flour based nanofibers containing PVA for high efficiency filtration.

Fabrication and characterization of biosilver nanoparticles loaded calcium pectinate nano-micro dual-porous antibacterial wound dressings

Development of materials for medical applications using biologically derived materials by green approaches is emerging as an important focus in the present healthcare scenario. Herein the first time, we report the plant extract mediated ultra-rapid biosynthesis of silver nanoparticles using whole plant extracts of Biophytum sensitivum. Synthesized nanoparticles were immobilized in nano-micro dual-porous calcium pectinate scaffolds for wound dressing application. Pectinate wound dressings containing silver nanoparticles have shown excellent antibacterial property and exudate uptake capacity while being biocompatible to the human cells.

Electrospun mupirocin loaded polyurethane fiber mats for anti-infection burn wound dressing application

Wound care treatment is a serious issue faced by the medical staffs due to its variety and complexity. Wound dressings are typically used to manage the various types of wounds. In this study, polyurethane (PU) fibers containing mupirocin (Mu), a commonly used antibiotic in wound care, were fabricated via electrospinning technique. The aim of this study was to develop biomedical electrospun fiber scaffolds for preventing wound infections with good compatibility and to demonstrate their applications as anti-infective burn wound dressings. The surface morphology of fibers was obtained by scanning electron microscopy. FT-IR spectra, water vapor transmission rate, and drug release study in vitro were tested to demonstrate the fiber scaffold characteristic. The prepared PU/Mu composite scaffolds had satisfactory antibacterial activity especially against Staphylococcus aureus. The cell studies revealed that the scaffolds were biocompatible and safe for cell attachment. Histological and immunohistochemical examinations were performed in rats, and the results indicated the histological analysis of tissue stained with H&E showed no obvious inflammation reaction. The results indicated that the electrospun scaffolds were capable of loading and delivering drugs, and could be potentially used as novel antibacterial burn wound dressings.