Engineered nanoparticles and organic matter: a review of the state-of-the-art

Towards the standardization of nanoecotoxicity testing: Natural organic matter 'camouflages' the adverse effects of TiO2 and CeO2 nanoparticles on green microalgae

In the last few years, the emission of CeO2 and TiO2 nanoparticles (NPs) into the environment has been raising concerns about their potential adverse effects on wildlife and human health. Aquatic organisms constitute one of the most important pathways for the entrance of these NPs and transfer throughout the food web, but divergences exist in the experimental data published on their aquatic toxicity. The pressing need for standardization of methods to analyze their ecotoxicity requires aquatic media representing realistic environmental conditions. The present study aimed to determine the usefulness of Suwannee River natural organic matter (SR-NOM) in the assessment of the agglomeration kinetics and ecotoxicity of CeO2 and TiO2 NPs towards green microalgae Pseudokirchneriella subcapitata. SR-NOM alleviated the adverse effects of NPs on algal growth, completely in the case of TiO2 NPs and partially in the case of CeO2 NPs, suggesting a 'camouflage' of toxicity. This behavior has been observed also for other algal species and types of natural organic matter in the literature. Furthermore, SR-NOM markedly increased the stability of the NPs in algal medium, which led to a better reproducibility of the toxicity test results, and provided an electrophoretic mobility similar to that previously reported in various river and groundwaters. Thus, SR-NOM can be a representative sample of what is found in many different ecosystems, and the observed 'camouflage' of the effects of CeO2 and TiO2 NPs on algal cells might be considered as a natural interaction occurring in their standardized ecotoxicological assessment.

Impact of natural organic matter on particle behavior and phototoxicity of titanium dioxide nanoparticles

Due to their inherent phototoxicity and inevitable environmental release, titanium dioxide nanoparticles (nano-TiO2) are increasingly studied in the field of aquatic toxicology. One of the particular interests is the interactions between nano-TiO2 and natural organic matter (NOM). In this study, a series of experiments was conducted to study the impacts of Suwannee River natural organic matter (SRNOM) on phototoxicity and particle behaviors of nano-TiO2. For Daphnia magna, after the addition of 5mg/L SRNOM, LC50 value decreased significantly from 1.03 (0.89-1.20) mg/L to 0.26 (0.22-0.31) mg/L. For zebrafish larvae, phototoxic LC50 values were 39.9 (95% CI, 25.9-61.2) mg/L and 26.3 (95% CI, 18.3-37.8) mg/L, with or without the presence of 5mg/L SRNOM, respectively. There was no statistically significant change of these LC50 values. The impact of SRNOM on phototoxicity of nano-TiO2 was highly dependent on test species, with D. magna being the more sensitive species. The impact on particle behavior was both qualitatively and quantitatively examined. A global predictive model for particle behavior was developed with a three-way interaction of SRNOM, TiO2 concentration, and time and an additive effect of ionic strength. Based on power analyses, 96-h exposure in bioassays was recommended for nanoparticle-NOM interaction studies. The importance of reactive oxygen species (ROS) quenching of SRNOM was also systematically studied using a novel exposure system that isolates the effects of environmental factors. These experiments were conducted with minimal impacts of other important interaction mechanisms (NOM particle stabilization, NOM UV attenuation, and NOM photosensitization). This study highlighted both the particle stabilization and ROS quenching effects of NOM on nano-TiO2 in an aquatic system. There is an urgent need for representative test materials, together with key environmental factors, for future risk assessment and regulations of nanomaterials.

Force Field Development for Lipid Membrane Simulations

With the rapid development of computer power and wide availability of modelling software computer simulations of realistic models of lipid membranes, including their interactions with various molecular species, polypeptides and membrane proteins have become feasible for many research groups. The crucial issue of the reliability of such simulations is the quality of the force field, and many efforts, especially in the latest several years, have been devoted to parametrization and optimization of the force fields for biomembrane modelling. In this review, we give account of the recent development in this area, covering different classes of force fields, principles of the force field parametrization, comparison of the force fields, and their experimental validation. This article is part of a Special Issue entitled: Biosimulations edited by Ilpo Vattulainen and Tomasz Róg.

Colloidal stability and ecotoxicity of multiwalled carbon nanotubes: Influence of select organic matters

In the last few years, the release of multiwalled carbon nanotubes (MWCNTs) into the environment has raised serious concerns regarding their fate and potential impacts. Aquatic organisms constitute an important pathway for their entrance and transfer throughout the food web, and the current demand for standardization of methodologies to analyze the interactions of MWCNTs with them requires aquatic media that represent natural systems. However, the inherent hydrophobicity of MWCNTs and the substances present in natural waters may greatly affect their stability and bioavailability. The present study analyzes the influence of the most referenced synthetic and natural organic matters (Sigma-Aldrich humic acid and Suwannee River natural organic matter) in the agglomeration kinetics and ecotoxicity of MWCNTs, with the aim of determining their suitability to fulfill the current standardization requirements. Natural organic matter provides increased colloidal stability to the MWCNTs' dispersions, which results in higher adverse effects on the key invertebrate organism Daphnia magna. Furthermore, the results obtained with this type of organic matter allow for observation of the important role of the outer diameter and content impurities of MWCNTs in their stability and ecotoxicity on daphnids. Sigma-Aldrich humic acid appeared to alter the response of the organisms to carbon nanotubes compared with that observed in the presence of natural organic matter.

A comparative analysis on the in vivo toxicity of copper nanoparticles in three species of freshwater fish

Copper nanoparticles (CuNPs) are used extensively in a wide range of products and the potential for toxicological impacts in the aquatic environment is of high concern. In this study, the fate and the acute toxicity of spherical 50nm copper nanoparticles was assessed in juvenile rainbow trout (Oncorhynchus mykiss), fathead minnow (Pimephales promelas) and zebrafish (Danio rerio) for in vivo aqueous exposures following standardized OECD 203 guideline tests. The fate of the CuNPs in the aqueous media was temperature dependent. At the higher study temperature (26±1°C), there was both an enhanced particle aggregation and higher rate of dissolution compared with that at the lower study temperature (15±1°C). 96h LC50s of the CuNPs were 0.68±0.15, 0.28±0.04 and 0.22±0.08mg Cu/L for rainbow trout, fathead minnow and zebrafish, respectively. The 96h lowest-observed-effect concentration (LOEC) for the CuNPs were 0.17, 0.023 and <0.023mg/L for rainbow trout, fathead minnow, and zebrafish respectively, and are below the predicted environmental concentration of CuNPs for some aquatic environments suggesting a possible ecotoxicological risk to fish. Soluble copper was one of main drivers for the acute toxicity of the copper nanoparticles suspensions. Both CuNPs suspension and copper nitrate caused damage to gill filaments and gill pavement cells, with differences in sensitivity for these effects between the fish species studied. We show therefore common toxicological effects of CuNPs in different fish species but with differences in sensitivity with implications for hazard extrapolation between fish species.

Evaluation of the side effects of poly(epsilon-caprolactone) nanocapsules containing atrazine toward maize plants

Poly(epsilon-caprolactone) (PCL) nanocapsules have been used as a carrier system for the herbicide atrazine, which is commonly applied to maize. We demonstrated previously that these atrazine containing polymeric nanocapsules were 10-fold more effective in the control of mustard plants (a target species), as compared to a commercial atrazine formulation. Since atrazine can have adverse effects on non-target crops, here we analyzed the effect of encapsulated atrazine on growth, physiological and oxidative stress parameters of soil-grown maize plants (Zea mays L.). One day after the post-emergence treatment with PCL nanocapsules containing atrazine (1 mg mL(-1)), maize plants presented 15 and 21% decreases in maximum quantum yield of photosystem II (PSII) and in net CO2 assimilation rate, respectively, as compared to water-sprayed plants. The same treatment led to a 1.8-fold increase in leaf lipid peroxidation in comparison with control plants. However, all of these parameters were unaffected 4 and 8 days after the application of encapsulated atrazine. These results suggested that the negative effects of atrazine were transient, probably due to the ability of maize plants to detoxify the herbicide. When encapsulated atrazine was applied at a 10-fold lower concentration (0.1 mg mL(-1)), a dosage that is still effective for weed control, no effects were detected even shortly after application. Regardless of the herbicide concentration, neither pre- nor post-emergence treatment with the PCL nanocapsules carrying atrazine resulted in the development of any macroscopic symptoms in maize leaves, and there were no impacts on shoot growth. Additionally, no effects were observed when plants were sprayed with PCL nanocapsules without atrazine. Overall, these results suggested that the use of PCL nanocapsules containing atrazine did not lead to persistent side effects in maize plants, and that the technique could offer a safe tool for weed control without affecting crop growth.

Ecotoxicological impact of engineered nanomaterials in bivalve molluscs: An overview

The increasing production and application of engineered nanomaterials (ENMs) in consumer products over the past decade will inevitably lead to their release into aquatic systems and thereby cause the exposure to aquatic organisms, resulting in growing environmental and human health concern. Since bivalves are widely used in the monitoring of aquatic pollution, the aim of this review was to compile and analyse data concerning the ecotoxicity of ENMs using bivalve molluscs. The state of the art regarding the experimental approach, characterization, behaviour, fate, bioaccumulation, tissue and subcellular distribution and mechanisms of toxicity of ENMs in marine and freshwater bivalve molluscs is summarized to achieve a new insight into the mode of action of these nanoparticles in invertebrate organisms. This review shows that the studies about the toxic effects of ENMs in bivalves were conducted mainly with seawater species compared to freshwater ones and that the genus Mytilus is the main taxa used as a model system. There is no standardization of experimental approaches for toxicity testing and reviewed data indicate the need to develop standard protocols for ENMs ecotoxicological testing. In general, the main organ for ENM accumulation is the digestive gland and their cellular fate differs according to nano-specific properties, experimental conditions and bivalve species. Endosomal-lysosomal system and mitochondria are the major cellular targets of ENMs. Metal based ENMs mode of action is related mainly to the dissolution and/or release of the chemical component of the particle inducing immunotoxicity, oxidative stress and cellular injury to proteins, membrane and DNA damage. This review indicates that the aquatic environment is the potential ultimate fate for ENMs and confirms that bivalve molluscs are key model species for monitoring aquatic pollution by ENMs.

Characterization of engineered TiO₂ nanomaterials in a life cycle and risk assessments perspective

For the last 10 years, engineered nanomaterials (ENMs) have raised interest to industrials due to their properties. They are present in a large variety of products from cosmetics to building materials through food additives, and their value on the market was estimated to reach $3 trillion in 2014 (Technology Strategy Board 2009). TiO2 NMs represent the second most important part of ENMs production worldwide (550-5500 t/year). However, a gap of knowledge remains regarding the fate and the effects of these, and consequently, impact and risk assessments are challenging. This is due to difficulties in not only characterizing NMs but also in selecting the NM properties which could contribute most to ecotoxicity and human toxicity. Characterizing NMs should thus rely on various analytical techniques in order to evaluate several properties and to crosscheck the results. The aims of this review are to understand the fate and effects of TiO2 NMs in water, sediment, and soil and to determine which of their properties need to be characterized, to assess the analytical techniques available for their characterization, and to discuss the integration of specific properties in the Life Cycle Assessment and Risk Assessment calculations. This study underlines the need to take into account nano-specific properties in the modeling of their fate and effects. Among them, crystallinity, size, aggregation state, surface area, and particle number are most significant. This highlights the need for adapting ecotoxicological studies to NP-specific properties via new methods of measurement and new metrics for ecotoxicity thresholds.

Flow cytometry for intracellular SPION quantification: specificity and sensitivity in comparison with spectroscopic methods

Due to their special physicochemical properties, iron nanoparticles offer new promising possibilities for biomedical applications. For bench to bedside translation of super-paramagnetic iron oxide nanoparticles (SPIONs), safety issues have to be comprehensively clarified. To understand concentration-dependent nanoparticle-mediated toxicity, the exact quantification of intracellular SPIONs by reliable methods is of great importance. In the present study, we compared three different SPION quantification methods (ultraviolet spectrophotometry, magnetic particle spectroscopy, atomic adsorption spectroscopy) and discussed the shortcomings and advantages of each method. Moreover, we used those results to evaluate the possibility to use flow cytometric technique to determine the cellular SPION content. For this purpose, we correlated the side scatter data received from flow cytometry with the actual cellular SPION amount. We showed that flow cytometry provides a rapid and reliable method to assess the cellular SPION content. Our data also demonstrate that internalization of iron oxide nanoparticles in human umbilical vein endothelial cells is strongly dependent to the SPION type and results in a dose-dependent increase of toxicity. Thus, treatment with lauric acid-coated SPIONs (SEON(LA)) resulted in a significant increase in the intensity of side scatter and toxicity, whereas SEON(LA) with an additional protein corona formed by bovine serum albumin (SEON(LA-BSA)) and commercially available Rienso(®) particles showed only a minimal increase in both side scatter intensity and cellular toxicity. The increase in side scatter was in accordance with the measurements for SPION content by the atomic adsorption spectroscopy reference method. In summary, our data show that flow cytometry analysis can be used for estimation of uptake of SPIONs by mammalian cells and provides a fast tool for scientists to evaluate the safety of nanoparticle products.

Chitosan nanoparticles loaded the herbicide paraquat: the influence of the aquatic humic substances on the colloidal stability and toxicity

Polymeric nanoparticles have been developed for several applications, among them as carrier system of pesticides. However, few studies have investigated the fate of these materials in the environment in relation to colloidal stability and toxicity. In nature, humic substances are the main agents responsible for complexation with metals and organic compounds, as well as responsible for the dynamics of these nanoparticles in aquatic and terrestrial environments. In this context, the evaluation of the influence of aquatic humic substances (AHS) on the colloidal stability and toxicity of polymeric nanoparticles of chitosan/tripolyphosphate with or without paraquat was performed. In this study, the nanoparticles were prepared by the ionic gelation method and characterized by size distribution measurements (DLS and NTA), zeta potential, infrared and fluorescence spectroscopy. Allium cepa genotoxicity studies and ecotoxicity assays with the alga Pseudokirchneriella subcapitata were used to investigate the effect of aquatic humic substances (AHS) on the toxicity of this delivery system. No changes were observed in the physical-chemical stability of the nanoparticles due to the presence of AHS using DLS and NTA techniques. However some evidence of interaction between the nanoparticles and AHS was observed by infrared and fluorescence spectroscopies. The ecotoxicity and genotoxicity assays showed that humic substances can decrease the toxic effects of nanoparticles containing paraquat. These results are interesting because they are important for understanding the interaction of these nanostructured carrier systems with species present in aquatic ecosystems such as humic substances, and in this way, opening new perspectives for studies on the dynamics of these carrier systems in the ecosystem.