Degradation and removal methods of antibiotics from aqueous matrices--a review

Occurrence of antibiotics in waters, removal by microalgae-based systems, and their toxicological effects: A review

Global antibiotics consumption has been on the rise, leading to increased antibiotics release into the environment, which threatens public health by selecting for antibiotic resistant bacteria and resistance genes, and may endanger the entire ecosystem by impairing primary production. Conventional bacteria-based treatment methods are only moderately effective in antibiotics removal, while abiotic approaches such as advanced oxidation and adsorption are costly and energy/chemical intensive, and may cause secondary pollution. Considered as a promising alternative, microalgae-based technology requires no extra chemical addition, and can realize tremendous CO₂ mitigation accompanying growth related pollutants removal. Previous studies on microalgae-based antibiotics removal, however, focused more on the removal performances than on the removal mechanisms, and few studies have concerned the toxicity of antibiotics to microalgae during the treatment process. Yet understanding the removal mechanisms can be of great help for targeted microalgae-based antibiotics removal performances improvement. Moreover, most of the removal and toxicity studies were carried out using environment-irrelevant high concentrations of antibiotics, leading to reduced guidance for real-world situations. Integrating the two research fields can be helpful for both improving antibiotics removal and avoiding toxicological effects to primary producers by the residual pollutants. This study, therefore, aims to build a link connecting the occurrence of antibiotics in the aquatic environment, the removal of antibiotics by microalgae-based processes, and the toxicity of antibiotics to microalgae. Distribution of various categories of antibiotics in different water environments were summarized, together with the antibiotics removal mechanisms and performances in microalgae-based systems, and the toxicological mechanisms and toxicity of antibiotics to microalgae after either short-term or long-term exposure. Current research gaps and future prospects were also analyzed. The review could provide much valuable information to the related fields, and provoke interesting thoughts on integrating microalgae-based antibiotics removal research and toxicity research on the basis of environmentally relevant concentrations.

Metabolic Mechanism of Sulfadimethoxine Biodegradation by Chlorella sp. L38 and Phaeodactylum tricornutum MASCC-0025

Antibiotic resistance is one of the most important environmental challenges. Microalgae has been considered as a promising green media for environmental purification. In this work, sulfadimethoxine (SDM) biodegradation potential of Chlorella sp. L38 and Phaeodactylum tricornutum MASCC-0025 is investigated. Experimental results indicated that the tested freshwater and marine microalgae strains presented stress response to SDM addition. For Chlorella sp. L38, it has a good adaptability to SDM condition via antioxidant enzyme secretion (SOD, MDA, and CAT up to 23.27 U/mg, 21.99 μmol/g, and 0.31 nmol/min/mg) with removal rate around 88%. P. tricornutum MASCC-0025 exhibited 100% removal of 0.5 mg/L SDM. With increasing salinity (adding a certain amount of NaCl) of cultivation media, the removal rate of SDM by microalgae increased. Although its adaptive process was slower than Chlorella sp. L38, the salinity advantage would facilitate enzyme accumulation. It indicated that microalgae could be used to remove SDM from freshwater and marine environment via suitable microalgae strain screening.

Removal of Doxycycline from Water using Dalbergia sissoo Waste Biomass Based Activated Carbon and Magnetic Oxide/Activated Bioinorganic Nanocomposite in Batch Adsorption and Adsorption/Membrane Hybrid Processes

The carbonaceous adsorbents, an activated carbon (AC) and a bioinorganic nanocomposite (MAC), were prepared using Dalbergia sissoo sawdust as waste biomass, in this study. Both the adsorbents were characterized by FTIR, EDX, SEM, XRD, TG/DTA, surface area, and a pore size analyzer. The adsorbents were used for the removal of an antibiotic, doxycycline (DC) antibiotic, from wastewater in order to minimize a load of antibiotics in industrial effluents and consequently the drug resistance problem. Initially, the effectiveness of adsorbent was confirmed using batch adsorption experiments where isothermal models like Langmuir, Freundlich Temkin, Jovanovic, and Harkins–Jura were utilized to govern the maximum adsorption capacity of AC and MAC while pseudo-first- and second-order kinetic models were used to estimate the values of different kinetic parameters. Langmuir model best accommodated the equilibrium data whereas the pseudo-second-order kinetic model finest trimmed the kinetics data. The effect of pH on adsorption was also evaluated where maximum removal was observed between pH 5 and 7 by both adsorbents. The effect of temperature on adsorption was evaluated where the entropy change (ΔS⁰) comes out to have a numerically positive value whereas Gibbs free energy change (ΔG⁰) and enthalpy change (ΔH⁰) were negative indicating the spontaneous nature and feasibility of the procedure. The robust technology of membrane separation is rapidly replacing the conventional technologies but at the same time suffers from the problem of membrane fouling. As pretreatment, the AC and MAC were used in hybrid with ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) membranes whereas permeate fluxes and percent retention of DC were compared for naked membrane operations and AC/membrane and MAC/membrane process. The permeate fluxes for MAC/membrane processes were greater as compared to AC/membrane and naked membrane processes showing the effectiveness of the bioinorganic composite as foul control and consequently recovery of DC from effluents. The percent retention of the UF membrane was lower as compared to NF and RO membranes. Improvement in percent retention for UF/AC, UF/MAC, NF/AC, NF/MAC, RO/AC, and RO/MAC was observed. The bioinorganic composite MAC contains a magnetic iron oxide which was effectively removed from slurry after use through the magnetic process and that was the main reason for high permeate fluxes in MAC/membrane operations.

Removal efficiency for emerging contaminants in a WWTP from Madrid (Spain) after secondary and tertiary treatment and environmental impact on the Manzanares River

The effluents from wastewater treatment plants (WWTPs) can be an important contamination source for receiving waters. In this work, a comprehensive study on the impact of a WWTP from Madrid on the aquatic environment has been performed, including a wide number of pharmaceuticals and pesticides, among them those included in the European Watch List. 24-h composite samples of influent (IWW) and effluent wastewater after secondary (EWW2) and after secondary + tertiary treatment (EWW3) were monitored along two campaigns. Average weekly concentrations in IWW and EWW2 and EWW3 allowed estimating the removal efficiency of the WWTP for pharmaceutical active substances (PhACs). In addition, the impact of EWW3 on the water quality of the Manzanares River was assessed, in terms of PhAC and pesticide concentrations, through analysis of the river water collected upstream and downstream of the discharge point. After a preliminary risk assessment, a detailed evaluation of the impact on the aquatic environment, including a toxicological study and screening of pharmaceutical metabolites, was made for the seven most relevant PhACs: sulfamethoxazole, azithromycin and clarithromycin (antibiotics), metoprolol (antihypertensive), diclofenac (anti-inflammatory/analgesic), irbesartan (antihypertensive), and the antidepressant venlafaxine. Among selected PhACs, irbesartan, clarithromycin and venlafaxine presented moderate or high risk in the river water downstream of the discharge. Albeit no acute toxicity was detected, more detailed studies should be carried out for these substances, including additional toxicological studies, to set up potential sublethal and chronic effects on aquatic organisms.

Performance improvement of PES membrane decorated by Mil-125(Ti)/chitosan nanocomposite for removal of organic pollutants and heavy metal

The Mil-125(Ti)-CS nanocomposite was successfully synthesized and characterized by using scanning electron microscopy (SEM) images, Fourier-transform infrared (FTIR) analysis and X-ray diffraction (XRD). Then, to improve the membrane performance, the synthesized Mil-125(Ti)-CS nanocomposite was embedded into the polyethersulfone (PES) membrane matrix. The nanofiltration membranes were fabricated via phase inversion method. Presence of chitosan in the structure of Mil-125(Ti) has increased the compatibility of nanoparticles with the polymer and also improved the hydrophilicity of the resulted membranes. The water contact angle of bare membrane (58°) was reduced to 40° by blending of 1 wt% nanocomposite led to increasing the pure water flux. However, the incorporation of more than 1 wt% of the nanocomposite caused the accumulation of nanocomposites and this was reduced the pore radius and permeability. The membrane containing 1 wt% nanocomposite was displayed the highest flux recovery ratio (FRR) ∼ 98% in bovine serum albumin (BSA) filtration. The membranes containing Mil-125(Ti)-CS also showed good performance against fouling. The performance of membranes was evaluated by treatment of six reactive dyes, antibiotic (cefixime), heavy metal, NaCl and Na₂SO₄ solutions. Addition of Mil-125(Ti)-CS NPs at low concentrations resulted in membranes with high pure water flux, higher separation efficiency, and remarkable anti-fouling behavior.

Suspect screening of antimicrobial agents transformation products in environmental samples development of LC-QTrap method running in pseudo MRM transitions

The aim of the work was to develop a new HPLC-MS/MS method that allows for the simultaneous detection of antimicrobials agents (targeted analysis) and their transformation products (non-targeted analysis), which enabled the elucidation of their transformation pathways in the environment. Targeted analysis was performed for 16 selected antimicrobials agents (AMs) in wastewater collected at different stages of the treatment process and river water from sections before and after wastewater discharge. The samples were collected in the Łyna sewage treatment plant (Olsztyn, Poland) in three measuring periods at different seasons. Analytes were selected from tetracyclines, fluoroquinolones, β-lactams, macrolides, glycopeptides, lincosamides and synthetic antibiotics. As a part of the targeted analysis, 13 AMs were detected in wastewater samples, and 7 of them in river water samples. However, their presence and concentrations were closely related to the type of the sample and the season in which the sample was taken. The highest concentrations of AMs were detected in samples collected in September (max. 1643.7 ng L^-1 TRI), while the lowest AMs concentrations were found in samples collected in June (max. 136.1 ng L^-1 CLR). The total content of AMs in untreated wastewater was in the range of 1.42-1644 ng L^-1, while in the river water was for upstream 1.22-48.73 ng L^-1 and for downstream 2.24-149 ng L^-1. In the non-target analysis, 33 degradation products of the selected AMs were identified, and the transformation pathways of their degradation were speculated. In the course of the research, it was found that as a result of the processes taking place in wastewater treatment plant, the parent substances are transformed into a number of stable transformation products. Transformation products resulted from hydroxylation, ring opening, oxidation, methylation or demethylation, carboxylation, or cleavage of the CN bond of the parent AMs.

Facile Synthesis of MOFs-Templated Carbon Aerogels with Enhanced Tetracycline Adsorption Performance

Three-dimensional aerogels have great potential for antibiotic removal from aqueous solution due to their excellent solution mass transfer channels and special morphology. Herein, the metal ions were bound with alginate to form alginate-Fe, alginate-Cu, and alginate-Fe-Cu hydrogels, then they were used as nucleation sites for metal organic framework (MOF) growth to obtain MAlgs gels, respectively. Considering the aqueous environmental stability of MOFs particles, the alginate and MOF particles in MAlgs aerogels were pyrolyzed as templates to obtain the derived carbon aerogel CMAlgs. The results showed that the adsorption capacity of MAlgs-Fe-Cu aerogel was higher than that of MAlg-Cu and MAlg-Fe aerogels, up to ~130 mg·g−1. The adsorption performance of carbon aerogel CMAlg-Cu decreased obviously because of the decrease of pore size and oxygen-containing functional groups. The adsorption process is a combination of physical adsorption and chemical adsorption. In addition, CMAlgs aerogels exhibit better recyclability than MAlgs aerogels. This work provides a new strategy for fabricating MOFs-templated in-situ grown carbon aerogels for water purification.

Community-level and function response of photoautotrophic periphyton exposed to oxytetracycline hydrochloride

Periphyton is considered important for removal of organic pollutants from water bodies, but knowledge of the impacts of antibiotics on the community structure and ecological function of waterbodies remains limited. In this study, the effects of oxytetracycline hydrochloride (OTC) on the communities of photoautotrophic epilithon and epipelon and its effect on nitrogen and phosphorus concentrations in the water column were studied in a 12-day mesocosm experiment. The dynamics of nitrogen and phosphorus concentrations in the epipelon and epilithon experiment showed similar patterns. The concentrations of total nitrogen, dissolved total nitrogen, ammonium nitrogen, total phosphorus and dissolved total phosphorus in the water column increased rapidly during the initial days of exposure, after which a downward trend occurred. In the epilithon experiment, we found that the photosynthesis (Fv/Fm) and biomass of epilithon were significantly (P < 0.05) stimulated in the low concentration group. Contrarily, growth and photosynthesis (Fv/Fm) were significantly (P < 0.05) reduced in the medium and high concentration group. We further found that the photosynthetic efficiency of photoautotrophic epilithon was negatively correlated with the concentrations of nitrogen and phosphorus in the water column (P < 0.05). Principal coordinate analysis (PCoA) showed that the communities of epilithic algae in the control group and in the low concentration group were significantly (P < 0.05) different from that of the high concentration group during the initial 4 days. After 8 days' exposure, all groups tended to be similar, indicating that epilithon showed rapid adaptability and/or resilience. Similar results were found for the relative abundance of some epilithic algae. Our findings indicate that the biofilm system has strong tolerance and adaptability to OTC as it recovered fast after an initial suppression, thus showing the important role of periphyton in maintaining the dynamic balance of nutrients with other processes in aquatic ecosystems.

Antibiotics and antibiotic resistance genes in landfills: A review

Landfill are important reservoirs of antibiotics and antibiotic resistance genes (ARGs). They harbor diverse contaminants, such as heavy metals and persistent organic chemicals, complex microbial consortia, and anaerobic degradation processes, which facilitate the occurrence, development, and transfer of ARGs and antibiotic resistant bacteria (ARB). The main concern is that antibiotics and developed ARGs and ARB may transfer to the local environment via leachate and landfill leakage. In this paper, we provide an overview of established studies on antibiotics and ARGs in landfills, summarize the origins and distribution of antibiotics and ARGs, discuss the linkages among various antibiotics, ARGs, and bacterial communities as well as the influencing factors of ARGs, and evaluate the current treatment processes of antibiotics and ARGs. Finally, future research is proposed to fill the current knowledge gaps, which include mechanisms for the development and transmission of antibiotic resistance, as well as efficient treatment approaches for antibiotic resistance.

Antibiotics in mariculture systems: A review of occurrence, environmental behavior, and ecological effects

Antibiotics are widely applied to prevent and treat diseases occurred in mariculture. The often-open nature of mariculture production systems has led to antibiotic residue accumulation in the culturing and adjacent environments, which can adversely affect aquatic ecosystems, and even human. This review summarizes the occurrence, environmental behavior, and ecological effects of antibiotics in mariculture systems based on peer-reviewed papers. Forty-five different antibiotics (categorized into ten groups) have been detected in mariculture systems around the world, which is far greater than the number officially allowed. Indiscriminate use of antibiotics is relatively high among major producing countries in Asia, which highlights the need for stricter enforcement of regulations and policies and effective antibiotic removal methods. Compared with other environmental systems, some environmental characteristics of mariculture systems, such as high salinity and dissolved organic matter (DOM) content, can affect the migration and transformation processes of antibiotics. Residues of antibiotics favor the proliferation of antibiotic resistance genes (ARGs). Antibiotics and ARGs alter microbial communities and biogeochemical cycles, as well as posing threats to marine organisms and human health. This review may provide a valuable summary of the effects of antibiotics on mariculture systems.

New theoretical investigation of mechanism, kinetics, and toxicity in the degradation of dimetridazole and ornidazole by hydroxyl radicals in aqueous phase

Dimetridazole (DMZ) and ornidazole (ONZ) have been widely used to treat anaerobic and protozoal infections. The residues of DMZ/ONZ persist in the water environment. The mechanisms and kinetics of hydroxyl-initiated oxidation, the primary DMZ/ONZ degradation method, were evaluated by quantum chemical methods.·OH-induced degradation of DMZ and ONZ shared many mechanistic and kinetic characteristics. The most feasible degradation pathway involved forming OH-imidazole adducts and NO₂. The OH-imidazole adducts were subsequently degraded into double·OH imidazole intermediates. The rate coefficients for·OH degradation of DMZ and ONZ were 4.32 × 10⁹ M^-1 s^-1 and 4.42 × 10⁹ M^-1 s^-1 at 298 K, respectively. The lifetimes of DMZ and ONZ treated with·OH at concentrations of 10^-9-10^-18 mol L^-1 at 298 K were τ_DMZ = 0.231-2.31 × 10⁸ s and τ_ONZ = 0.226-2.26 × 10⁸ s, respectively. Toxicity assessment showed that the first degradation products of DMZ and ONZ exhibited enhanced aquatic toxicity, whereas most of the secondary degradation products were not harmful to aquatic organisms. Some of transformation products were still developmental toxicant or mutagenicity positive.

Photocatalytic degradation of tetracycline antibiotics using hydrothermally synthesized two-dimensional molybdenum disulfide/titanium dioxide composites

Tetracycline (TC) is a persistent antibiotic used in many countries, including China, India, and the United States of America (USA), because of its low price and effectiveness in enhancing livestock production. However, such antibiotics can have toxic effects on living organisms via complexation with metals, and their accumulation leading to teratogenicity and carcinogenicity. In this study, two-dimensional molybdenum disulfide/titanium dioxide (MoS₂/TiO₂) composites with different amounts of molybdenum disulfide (MoS₂) were prepared via a simple, cost-effective, and pollution-free hydrothermal route. The synthesized MoS₂/TiO₂ microstructures were thoroughly characterized and their performance for the photocatalytic degradation of antibiotics such as TC was investigated. In the degradation experiments, the photocatalytic activities of TiO₂ and the MoS₂/TiO₂ composites were compared, and the effects of different parameters, such as catalyst dose and electrolyte solution pH, were investigated. Under irradiation, the MoS₂/TiO₂ composites possessed superior photodegradation activity toward TC because of their excellent adsorption abilities, suitable band positions, and large surface areas as well as the effective charge-transfer ability of MoS₂. Kinetics studies revealed that the photocatalytic degradation process followed pseudo-first-order reaction kinetics. In addition, a degradation mechanism for TC was proposed.

Microbe mediated remediation of dyes, explosive waste and polyaromatic hydrocarbons, pesticides and pharmaceuticals

•

Environmental pollutants dyes, pesticides, pharmaceuticals, explosive waste and polyaromatic hydrocarbons.

•

Environmental pollutants toxicity.

•

Possible microbial biodegradation pathways of environmental pollutants.

Industrialization and human activities have led to serious effects on environment. With the progress taking place in the biodegradation field, it is important to summarize the latest advancement. In this review, we intend to provide insights on the recent progress on the biodegradation of environmental contaminants such as dyes, pesticides, pharmaceuticals, explosive waste and polyaromatic hydrocarbons by microorganisms. Along with the biodegradation of environmental contaminants, toxicity effects have also been discussed.

Thermally-treated MgO/nanocrystalline cellulose immobilized onto a Santa Barbara-16 mesoporous SiO2 template for the sequestration of antibiotics from polluted water

Clean technologies using functional materials as adsorbents for removing antibiotics from polluted water are of great interest, especially for water scarce sub-African countries.

In situ composite of Co-MOF on a Ti-based material for visible light multiphase catalysis: synthesis and the photocatalytic degradation mechanism

A Co-MOF/Ti-based Z-type heterojunction prepared by an in situ growth method exhibits good photocatalytic activity for tetracycline.

Zinc ferrite-graphitic carbon nitride nanohybrid for photo-catalysis of the antibiotic ciprofloxacin

2D hybrid sheets of zinc ferrite and graphitic carbon nitride were explored for their application as a UV catalyst for the degradation of ciprofloxacin.

Influence of anions on ozonation of bisphenol AF: Kinetics, reaction pathways, and toxicity assessment

In this article, the degradation of 4, 4'-(hexafluoroisopropylidene) diphenol (bisphenol AF, BPAF) by ozone was studied and toxicity of the degradation products was evaluated. Kinetic studies showed that acidic conditions were more conducive to the ozone degradation of BPAF than alkaline conditions. In the presence of common anions, Br^- and SO₄^2- promoted the degradation of BPAF, whereas NO₂^-, NO₃^-, HSO₃^- inhibited the degradation, and the other anions and cations had no significant effect. The degradation products were analyzed by mass spectrometry, and were mainly manifested in hydroxylation, carboxylation and cleavage of benzene ring. The addition of NO₂^-, HSO₃^- and Br^-produced the corresponding free radicals, resulting in the parent compound being attacked and affecting the degradation efficiency and pathways. The theoretical calculated results showed that the ortho-site of the BPAF phenolic hydroxyl group was more active than the meta-position, and it's more likely for free radicals to attack ortho-sites and initiate substitution reactions. Toxicity assessment of the products in the process of ozone degradation showed that toxicity of the products was reduced by benzene ring cleavage and a reduction in the F atomic number. However, the toxicity of nitro and brominated products of BPAF was increased. These findings provide some new insights into the role of common ions in ozonation process and product formation, and supplement the existing conclusions. The results of this study remind future researchers to concern that inorganic ions in real water may be converted into corresponding free radicals that affect the formation of ozone oxidation products.

Distribution, transfer, ecological and human health risks of antibiotics in bay ecosystems

Antibiotics have been widely detected in bay ecosystems, yet little is known regarding their distribution, composition, sources, ecological and human health risks at the regional scale. We developed a systematic framework to mine data from existing publications and compiled an antibiotic concentration-based dataset containing 439 samples from 30 bays, and compared antibiotics across bays and matrices (water, sediment, and biota). Antibiotic concentrations varied considerably between bays, with hotspots occurring in East Asia. The main categories of antibiotics in waters included sulfonamide and macrolide, while tetracycline, quinolone, and macrolide antibiotics were prevalent in sediments. The main sources of antibiotics in bays included sewage treatment plant effluent, domestic sewage, agriculture runoff, and discharges from mariculture activities. Antibiotics with high ecological risks mainly included sulfamethoxazole, erythromycin, clarithromycin, and oxytetracycline. Erythromycin posed a considerable risk to human health, and the human health risks presented by other antibiotics were negligible. Regional variations of concentrations correspond to the uneven geographic consumption of antibiotics and their removal rate during wastewater treatment. Differences in antibiotics' composition between matrices are associated mainly with the physicochemical properties of antibiotics (e.g., molecular structure, solubility, and stability) and the content of total organic carbon, metal ions, chlorophyll a, and clay minerals in the sediments. To reduce the ecological and human health implications, priority should be given to the removal of erythromycin, sulfamethoxazole, oxytetracycline, and clarithromycin, with a special focus on their treatment in the Asian bay areas.

Increasing oxytetracycline and enrofloxacin concentrations on the algal growth and sewage purification performance of an algal-bacterial consortia system

Oxytetracycline (OTC) and enrofloxacin (EFX) pollution in surface water are very common. Using the algal-bacterial consortia system to remove antibiotics remains to be further studied. In this study, the algal growth and sewage purification performance were studied in an algal-bacterial consortia system with different concentrations of antibiotics. The enzyme activity, malondialdehyde content, chlorophyll-a content, extracellular polysaccharide, and protein content of algae were also tested. It was found that the algal growth was promoted by low-dose antibiotics, 21.83% and 22.11% promotion at 0.1 mg L^-1 OTC and EFX, respectively. The nutrients and antibiotics removals of the low-dose groups (OTC <5 mg L^-1, EFX <1 mg L^-1) were not affected significantly. More than 70% of total organic carbon and total phosphorus, and 97.84-99.76% OTC, 42.68-42.90% EFX were removed in the low-dose groups. However, the algal growth was inhibited, and the nutrients removals performance also declined in the high-concentration groups (10 mg L^-1 OTC, 5 mg L^-1 EFX). The superoxide dismutase and catalase activity, and malondialdehyde content increased significantly (P < 0.05), indicating the increased activity of reactive oxygen species. In addition, the decreased chlorophyll-a content, thylakoid membrane deformation, starch granules accumulation, and plasmolysis showed that the algal physiological functions were affected. These results showed that the algal-bacterial consortia system was more suitable to treat low-concentration antibiotics and provided basic parameters for the consortia application.

Investigation of Photocatalysis by Mesoporous Titanium Dioxide Supported on Glass Fibers as an Integrated Technology for Water Remediation

The photocatalytic efficiency of an innovative UV-light catalyst consisting of a mesoporous TiO2 coating on glass fibers was investigated for the degradation of pharmaceuticals (PhACs) in wastewater effluents. Photocatalytic activity of the synthesized material was tested, for the first time, on a secondary wastewater effluent spiked with nine PhACs and the results were compared with the photolysis used as a benchmark treatment. Replicate experiments were performed in a flow reactor equipped with a UV radiation source emitting at 254 nm. Interestingly, the novel photocatalyst led to the increase of the degradation of carbamazepine and trimethoprim (about 2.2 times faster than the photolysis). Several transformation products (TPs) resulting from both the spiked PhACs and the compounds naturally occurring in the secondary wastewater effluent were identified through UPLC-QTOF/MS/MS. Some of them, produced mainly from carbamazepine and trimethoprim, were still present at the end of the photolytic treatment, while they were completely or partially removed by the photocatalytic treatment.

Synthesis and characterization of ternary chitosan-TiO2-ZnO over graphene for photocatalytic degradation of tetracycline from pharmaceutical wastewater

Various nanocomposites of TiO₂-ZnO, TiO₂-ZnO/CS, and TiO₂-ZnO/CS-Gr with different molar ratios were synthesized by sol-gel and ultrasound-assisted methods and utilized under UV irradiation to enhance the photocatalytic degradation of tetracycline. Characterization of prepared materials were carried out by XRD, FT-IR, FE-SEM, EDX and BET techniques. The TiO₂-ZnO with the 1:1 molar ratio supported with 1:2 weight ratio CS-Gr (T1‒Z1/CS1‒Gr2 sample) appeared as the most effective material at the optimized operational conditions including the tetracycline concentration of 20 mg/L, pH = 4, catalyst dosage of 0.5 g/L, and 3 h of irradiation time. As expected, the graphene had a significant effect in improving degradation results. The detailed performances of the T1‒Z1/CS1‒Gr2 were compared with ternary nanocomposites from EDX and BET results as well as from the degradation viewpoint. This novel photocatalyst can be effective in actual pharmaceutical wastewater treatment considering the applied operational parameters.

Treatment technologies to mitigate the harmful effects of recalcitrant fluoroquinolone antibiotics on the environ- ment and human health

Antibiotic proliferation in the environment and their persistent nature is an issue of global concern as they induce antibiotic resistance threatening both human health and the ecosystem. Antibiotics have therefore been categorized as emerging pollutants. Fluoroquinolone (FQs) antibiotics are an emerging class of contaminants that are used extensively in human and veterinary medicine. The recalcitrant nature of fluoroquinolones has led to their presence in wastewater, effluents and water bodies. Even at a low concentration, FQs can stimulate antibacterial resistance. The main sources of FQ contamination include waste from pharmaceutical manufacturing industries, hospitals and households that ultimately reaches the wastewater treatment plants (WWTPs). The conventional WWTPs are unable to completely remove FQs due to their chemical stability. Therefore, the development and implementation of more efficient, economical, convenient treatment and removal technologies are needed to adequately address the issue. This review provides an overview of the technologies available for the removal of fluoroquinolone antibiotics from wastewater including adsorptive removal, advanced oxidation processes, removal using non-carbon based nanomaterials, microbial degradation and enzymatic degradation. Each treatment technology is discussed on its merits and limitations and a comparative view is presented on the choice of an advanced treatment process for future studies and implementation. A discussion on the commercialization potential and eco-friendliness of each technology is also included in the review. The importance of metabolite identification and their residual toxicity determination has been emphasized. The last section of the review provides an overview of the policy interventions and regulatory frameworks that aid in retrofitting antibiotics as a central key focus contaminant and thereby defining the discharge limits for antibiotics and establishing safe manufacturing practices.

Heterogeneous Photocatalysis of Metronidazole in Aquatic Samples

Metronidazole (MET) is a commonly detected contaminant in the environment. The compound is classified as poorly biodegradable and highly soluble in water. Heterogeneous photocatalysis is the most promoted water purification method due to the possibility of using sunlight and small amounts of a catalyst needed for the process. The aim of this study was to select conditions for photocatalytic removal of metronidazole from aquatic samples. The effect of catalyst type, mass, and irradiance intensity on the efficiency of metronidazole removal was determined. For this purpose, TiO₂, ZnO, ZrO₂, WO₃, PbS, and their mixtures in a mass ratio of 1:1 were used. In this study, the transformation products formed were identified, and the mineralization degree of compound was determined. The efficiency of metronidazole removal depending on the type of catalyst was in the range of 50-95%. The highest MET conversion (95%) combined with a high degree of mineralization (70.3%) was obtained by using a mixture of 12.5 g TiO₂-P25 + PbS (1:1; v/v) and running the process for 60 min at an irradiance of 1000 W m^-2. Four MET degradation products were identified by untargeted analysis, formed by the rearrangement of the metronidazole and the C-C bond breaking.

Removal of pharmaceuticals by advanced treatment methods

The removal of endocrine disrupting compounds (EDCs) remains a big challenge in water treatment in terms of public health. The aim of the study was evaluating the performance of nano TiO2, ozone, and UV system for removal of EDCs. In this study, the efficiency of the nano TiO₂ to degrade target EDCs under catalytic and photocatalytic ozonation was examined at different operational conditions. The maximum removal of target pollutant was obtained with pH 6.8; ozone concentration 10 mg/L; catalyst dosage 0.050 g/L and the duration time of the photocatalytic performances was 10 min showing the most treatment conditions respectively. In addition, the surface reaction mechanism of endocrine disrupting compound removal by catalytic and photocatalytic ozonation was investigated. The results showed that the catalyst can significantly enhance the removal of target compound. The 99.0%, 88.3% and 51.8% removal rates were obtained at photocatalytic ozonation, catalytic ozonation and sole ozonation, respectively. These results indicated that the Ozone/TiO₂/UV process was favorable for engineering applications for removal of endocrine disrupting compounds such as steroid hormone and likely similar micro pollutants.

Adsorption and detoxification of pharmaceutical compounds from wastewater using nanomaterials: A review on mechanism, kinetics, valorization and circular economy

Antibiotics overuse, inappropriate conduct, and discharge have led to adverse effects on various ecosystems. The occurrence of antibiotics in surface and drinking water is a matter of global concern. It is responsible for multiple disorders, including disruption of endocrine hormones and high chronic toxicity. The hospitals, pharmaceutical industries, households, cattle farms, and aquaculture are the primary discharging sources of antibiotics into the environment. This review provides complete detail on applying different nanomaterials or nanoparticles for the efficient removal of antibiotics from the diverse ecosystem with a broader perspective. Efforts have been made to focus on the degradation pathways and mechanism of antibiotic degradation using nanomaterials. More light has been shed on applying nanostructures in photocatalysis, which would be an economical and efficient solution. The nanoscale material or nanoparticles have incredible potential for mineralizing pharmaceutical compounds in aqueous solutions at low cost, easy handling characteristics, and high efficacy. Furthermore, nanoparticles can absorb the pharmaceutical by-products and wastes at a minimum cost as they can be easily recycled. With the increasing number of research in this direction, the valorization of pharmaceutical wastes and by-products will continue to expand as we progress from old conventional approaches towards nanotechnology. The utilization of nanomaterials in pharmaceutical wastewater remediation is discussed with a major focus on valorization, energy generation, and minimization and its role in the circular economy creating sustainable development.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Adsorptive Removal of Azithromycin Antibiotic from Aqueous Solution by Azolla Filiculoides-Based Activated Porous Carbon

Due to the shortage of freshwater availability, reclaimed water has become an important source of irrigation water. Nevertheless, emergent contaminants such as antibiotics in reclaimed water can cause potential health risks because antibiotics are nonbiodegradable. In this paper, we report the adsorptive removal of azithromycin (AZM) antibiotics using activated porous carbon prepared from Azolla filiculoides (AF) (AFAC). The influence of the adsorption process variables, such as temperature, pH, time, and adsorbent dosage, is investigated and described. The prepared AFAC is very effective in removing AZM with 87% and 98% removal after the treatment of 75 min, at 303 and 333 K, respectively. The Langmuir, Temkin, Freundlich, and Dubinin–Radushkevich isotherm models were used to analyze the adsorption results. The Freundlich isotherm was best to describe the adsorption isotherm. The adsorption process follows second-order pseudo kinetics. The adsorption was endothermic (ΔH°= 32.25 kJ/mol) and spontaneous (ΔS° = 0.128 kJ/mol·K). Increasing the temperature from 273 to 333 K makes the process more spontaneous (ΔG° = −2.38 and −8.72 KJ/mol). The lower mean square energy of 0.07 to 0.845 kJ/mol confirms the process’ physical nature. The results indicate that AFAC can be a potential low-cost adsorbent of AZM from aqueous solutions.

Filter-membrane treatment of flowing antibiotic-containing wastewater through peroxydisulfate-coupled photocatalysis to reduce resistance gene and microbial inhibition during biological treatment

The direct biological treatment of antibiotics containing wastewater brings about a potential risk of antibiotic resistance genes (ARGs) spread. Although advanced oxidation technologies based on photocatalysis generally appear effective at degrading antibiotics in wastewater, the fate of ARGs in succeeding biological treatment system is still unknown. Herein, a filter-membrane-like carbon cloth-immobilized Fe₂O₃/g-C₃N₄ photocatalyst is fabricated through immersion-calcination method. Peroxydisulfate-coupled photocatalysis system is developed to degrade tetracycline (TC, an emerging refractory antibiotic pollutant). The system can produce energetic active species (·OH, SO₄^·-, h⁺, O₂^·- and ¹O₂), exhibiting a superior performance towards TC degradation in static and continuous flow processes under visible-light irradiation. The pretreatment can eliminate the antibacterial activity of antibiotics wastewater, and the chemical oxygen demand removal is greatly enhanced in subsequent anaerobic or aerobic process. The microbial diversity and richness in activated sludge for pretreated water sample are significantly higher than those for the water sample without pretreatment. Meanwhile, the pretreatment can decrease the relative abundance of potential hosts of ARGs and reduce the emergence as well as dissemination risk of ARGs. This study uncovers the effect of pretreatment of antibiotics containing wastewater using advanced oxidation technologies on the treatment efficacy and antibiotic resistome fate in biological treatment system.

Ozonation of Amoxicillin and Ciprofloxacin in Model Hospital Wastewater to Increase Biotreatability

Amoxicillin (AMX) and Ciprofloxacin (CIP) are antibiotics commonly used in human medicine with high environmental toxicity and poor biodegradability. They have been found in various hospital effluents and groundwater, and their environmental impact is still not fully understood. In this work, we investigated the possibility of treating model wastewaters containing the antibiotics AMX and CIP using ozonation, with the addition of H₂O₂ under various conditions, including different pH values, H₂O₂, and ozone dosages. The quantification of and treatment efficacy for antibiotic removal were determined via solid phase extraction followed by chromatographic separation by liquid chromatography coupled with tandem triple quadrupole mass spectrometry (LC/MS/MS). This analytical system is quite efficient for the detection of all major antibiotic classes, even if they are present at very low concentrations. The efficiency of ozonation was determined by measuring the TOC (Total Organic Carbon) changes after ozonation of the model wastewater and by measuring the concentration of the two antibiotics. In a sequential activated sludge process of ozone-treated model wastewater, almost complete TOC removal and an overwhelming decrease in antibiotic concentrations (up to 99%) were observed. Ozonation resulted in complete removal of AMX and CIP in less than 30 and 120 min, respectively. The results of this work indicate that ozonation could be a suitable pretreatment method to reduce the toxicity of contaminants (AMX and CIP) and improve the biodegradability of hospital wastewater.

Prediction of the excited-state reaction channels in photo-induced processes of nitrofurantoin using first-principle calculations and dynamics simulations

The understanding of the photochemistry of antibiotic compounds is important because it gives the direct information on the possible environmental pollution caused by them. Due to their large size, the theoretical studies of their excited-state reactions are rather challenging. In current work, we combined the on-the-fly trajectory surface-hopping dynamics, conical-intersection optimizations and excited-state pathway calculations to study the photochemistry of the trans-isomer of nitrofurantoin, a widely-used drug to treat the urinary tract infections. The dynamics-then-pathway approach was taken. First the trajectory surface hopping dynamics at the state-averaged complete-active-space self-consistent-field (SA-CASSCF) level with small active space and small basis sets were run. Second, the minimum-energy conical-intersection optimizations were performed. Finally the excited pathways from the Frank-Condon region to different reaction channels were built at the multi-state multi-reference second-order perturbation (MS-CASPT2) level with large active space and large basis set. Several possible channels responsible for the photo-induced reaction mechanism of the trans-nitrofurantoin were obtained, including the cleavage of the NO bond of the NO₂ moiety, the photoisomerization at the central CN bond, and other internal conversion channels. Our findings give some preliminary explanations on available experimental observations. It is also demonstrates that the current theoretical approach is a powerful tool to explore the excited-state reactions in the photochemistry of media-sized or large-sized drug compounds.

Cobalt-Enhanced Mass Transfer and Catalytic Production of Sulfate Radicals in MOF-Derived CeO2 • Co3 O4 Nanoflowers for Efficient Degradation of Antibiotics

Antibiotics discharge has been a critical issue as the abuse in clinical disease treatment and aquaculture industry. Advanced oxidation process (AOPs) is regarded as a promising approach to degrade organic pollutants from wastewater, however, the catalysts for AOPs always present low activities, and uncontrollable porosities, thus hindering their further wider applications. In this work, an aliovalent-substitution strategy is employed in metal-organic framework (MOF) precursors assembly, aiming to introduce Co(II/III) into Ce-O clusters which could modify the structure of the clusters, then change the crystallization, enlarge the surface area, and regulate the morphology. The introduction of Co(II/III) also enlarges the pore size for mass transfer and enriches the active sites for the production of sulfate radicals (SO₄^• - ) in MOF-derived catalysts, leading to excellent performance in antibiotics removal. Significantly, the CeO₂ •Co₃ O₄ nanoflowers could efficiently enhance the generation of sulfate radical SO₄^• - and promote the norfloxacin removal efficiency to 99% within 20 min. The CeO₂ •Co₃ O₄ nanoflowers also present remarkable universality toward various antibiotics and organic pollutants. The aliovalent-substitution strategy is anticipated to find wide use in the exploration of high-performance MOF-derived catalysts for various applications.

Simultaneous reductions in antibiotics and heavy metal pollution during manure composting

The co-existence of antibiotics and heavy metal (HM) is common in manure. However, existing strategies for improving antibiotic dissipation or HM immobilization during composting rarely consider their combined pollution. In this study, we used agricultural lime and a newly designed attapulgite-activated carbon composite (AACC) to enhance the stabilization of HMs in a pilot-scale swine manure composting system and assessed the effectiveness of these materials for removing antibiotic residues. Results indicated that the application of either lime or AACC simultaneously enhanced HM immobilization and antibiotic degradation. In particular, the addition of AACC reduced the enrichment of Cr, Cd, Pb, and As during composting and decreased the half-lives of the antibiotics from 10.7 days to 6.3 days, which were more effectively than lime. The physicochemical and microbiological responses to different additives were subsequently studied to understand the mechanisms underlying the fates of HMs and antibiotics. High HM stress in manure inhibited antibiotic dissipation, but metal immobilization alleviated this effect. The AACC accelerated HM immobilization by surface adsorption and metal precipitation, and this enhancement strengthened during the late composting stage due to an increase in pH, whereas lime exhibited a short-term effect. Moreover, the AACC addition enhanced the contribution of bacteria to changes in antibiotic concentrations, while the increase in pile temperature could be a major factor that contributed to the acceleration of antibiotic degradation after the addition of lime. Characterization of the final compost further showed that AACC-treated compost had the lowest residual concentrations of HMs and antibiotics, higher mortality of ascarid egg, improved nitrogen conversation, and reduced phytotoxicity. Thus, co-composting of swine manure with AACC is a promising approach for producing safer compost for use in agriculture.

Efficient degradation of tetracycline by RGO@black titanium dioxide nanofluid via enhanced catalysis and photothermal conversion

The applications of photocatalytic pollutant degradation have remained limited due to the low efficiency of solar energy utilization. In this study, a photothermal catalyst consisting of reduced graphene oxide @ black TiO₂ (RGO@BT) nanofluid with effective full-spectrum (from ultraviolet to infrared light) absorption was synthesized by a typical two-step method of high temperature calcination and hydrothermal method. Moreover, the photothermal catalytic performance of the RGO@BT nanofluid on tetracycline was verified. Compared with individual processes (i.e, photocatalysis and thermocatalysis), the photothermal catalytic process significantly enhanced tetracycline degradation under simulated global standard spectrum sunlight (AM 1.5G, 1000 W m^-2). The maximum photothermal conversion efficiency reached 91.8%, which resulted in 94.7% tetracycline degradation (40 mg L^-1) after 120 min of treatment with 200 mg L^-1 RGO@BT nanofluid. Holes, OH, and O₂^- were found to be the main active species during the photothermal catalytic process. Moreover, heat was spontaneously converted from light energy without the use of any external energy source. The elevated system temperature facilitated the tetracycline degradation based on the Arrhenius behavior. These findings provide insights into the improvement of photocatalytic efficiency in organic contaminant degradation via solar energy-efficient photothermal conversion materials.

Integrated structural and chemical analyses for HCl-supported hydrochar and their adsorption mechanisms for aqueous sulfachloropyridazine removal

In this study, various HCl-supported hydrochar made from root powder of long-root Eichhornia crassipes were applied to adsorb aqueous sulfachloropyridazine (SCP). Adsorption capacity (q_e μg g^-1) was positively correlated with combined severity-CS. With CS increasing, carbonization degree, hydrophobicity, porosity and isoelectric point of hydrochar increased, but content of polar functional groups decreased. Hydrophobic interaction was important for SCP adsorption. A 24 × 36 peak area table was generated from 24 FT-IR absorbance spectra computed by peak detection algorithm. Afterwards, correlation analysis between q_e μg g^-1 and FT-IR peak area were conducted, indicating that wavenumbers at 555.4, 1227.47, 1374.51, 1604.5, 2901.4/2919.2 and 3514.63 cm^-1 were helpful for SCP adsorption. Further, multivariate linear regression analyses showed that aromatic skeleton and phenolic hydroxyl were the two biggest contributors. Electrostatic attraction did not exist during the SCP adsorption process. Under strong acid condition, protonated amino groups in cationic SCP acting as a hydrogen donator interacted with electron-rich functional groups onto hydrochar by Hydrogen interaction. Under weak acid condition, neutral SCP served as an π electron donor to bond with hydrochar by π-π electron donator-acceptor interaction. This work could guide the functional groups modification strategy of hydrochar to make better use of it in water purification field.

A review on non-thermal plasma treatment of water contaminated with antibiotics

Large amounts of antibiotics are produced and consumed worldwide, while wastewater treatment is still rather inefficient, leading to considerable water contamination. Concentrations of antibiotics in the environment are often sufficiently high to exert a selective pressure on bacteria of clinical importance that increases the prevalence of resistance. Since the drastic reduction in the use of antibiotics is not envisaged, efforts to reduce their input into the environment by improving treatment of contaminated wastewater is essential to limit uncontrollable spread of antibiotic resistance. This paper reviews recent progress on the use of non-thermal plasma for the degradation of antibiotics in water. The target compounds removal, the energy efficiency and the mineralization are analyzed as a function of discharge configuration and the most important experimental parameters. Various ways to improve the plasma process efficiency are addressed. Based on the identified reaction intermediates, degradation pathways are proposed for various classes of antibiotics and the degradation mechanisms of these chemicals under plasma conditions are discussed.

A Review on the Application of Zeolites and Mesoporous Silica Materials in the Removal of Non-Steroidal Anti-Inflammatory Drugs and Antibiotics from Water

Zeolites and mesoporous silica materials are effective adsorbents that can be useful for the removal of various pharmaceuticals including non-steroidal anti-inflammatory drugs and antibiotics from low-quality water. This paper summarizes the properties and basic characteristics of zeolites and mesoporous silica materials and reviews the recent studies on the efficacy of the adsorption of selected non-steroidal medicinal products and antibiotics by these adsorbents to assess the potential opportunities and challenges of using them in water treatment. It was found that the adsorption capacity of sorbents with high silica content is related to their surface hydrophobicity (hydrophilicity) and structural features, such as micropore volume and pore size, as well as the properties of the studied medicinal products. This review can be of help to scientists to develop an effective strategy for reducing the amount of these two groups of pharmaceuticals in wastewater.

Combined Adsorption and Photocatalytic Degradation for Ciprofloxacin Removal Using Sugarcane Bagasse/N,S-TiO2 Powder Composite

N,S-TiO2 deposited on three kinds of pre-treated sugarcane bagasse was synthesized via a sol–gel method. The obtained composites were characterized by various techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and photoluminescence spectroscopy (PL). UV-visible induced degradation of ciprofloxacin was investigated. The influence of some experimental parameters such as contact time, pH, dosage, and initial concentration on the efficiency of ciprofloxacin elimination was also evaluated. The highest efficiency was observed for the alkaline pre-treated sugarcane bagasse combined with N,S-TiO2, about 86% under optimal conditions (contact time 150-min irradiation, pH 5.5–6, dosage 0.5 g L−1, and the initial concentration CIP 30 ppm). There may be a rapid ciprofloxacin transition from the adsorption site to the photocatalytic site, and the alkaline pre-treated sugarcane bagasse/N,S-TiO2 prevented the recombining of holes and electrons of the photocatalyst. Furthermore, the alkaline pretreatment sugarcane bagasse/N,S-TiO2 composite material was sustainable, with only a 10% reduction after reusing the material three times. The presence of sugarcane bagasse made the material easy to recover from the liquid phase.

A novel bio-electro-Fenton system with dual application for the catalytic degradation of tetracycline antibiotic in wastewater and bioelectricity generation

In this new insight, the potential application of the eco-friendly Bio-Electro-Fenton (BEF) system was surveyed with the aim of simultaneous degradation of tetracycline and in situ generation of renewable bioenergy without the need for an external electricity source. To shed light on this issue, catalytic degradation of tetracycline was directly accrued via in situ generated hydroxyl free radicals from Fenton's reaction in the cathode chamber. Simultaneously, the in situ electricity generation as renewable bioenergy was carried out through microbial activities. The effects of operating parameters, such as electrical circuit conditions (in the absence and presence of external resistor load), substrate concentration (1000, 2000, 5000, and 10 000 mg L⁻¹), catholyte pH (3, 5, and 7), and FeSO₄ concentration (2, 5, and 10 mg L⁻¹) were investigated in detail. The obtained results indicated that the tetracycline degradation was up to 99.04 ± 0.91% after 24 h under the optimal conditions (short-circuit, pH 3, FeSO₄ concentration of 5 mg L⁻¹, and substrate concentration of 2000 mg L⁻¹). Also, the maximum removal efficiency of anodic COD (85.71 ± 1.81%) was achieved by increasing the substrate concentration up to 2000 mg L⁻¹. However, the removal efficiencies decreased to 78.29 ± 2.68% with increasing substrate concentration up to 10 000 mg L⁻¹. Meanwhile, the obtained maximum voltage, current density, and power density were 322 mV, 1195 mA m⁻², and 141.60 mW m⁻², respectively, at the substrate concentration of 10 000 mg L⁻¹. Present results suggested that the BEF system could be employed as an energy-saving and promising technology for antibiotic-containing wastewater treatment and simultaneous sustainable bioelectricity generation.

In this new insight, the potential application of the Bio-Electro-Fenton system was surveyed with the aim of simultaneous degradation of tetracycline and in situ generation of renewable bioenergy without the need for an external electricity source.

Treatment of pharmaceutical wastewater by ionizing radiation: Removal of antibiotics, antimicrobial resistance genes and antimicrobial activity

In present study, the treatment of real pharmaceutical wastewater from an erythromycin (ERY) production factory by gamma irradiation was investigated. Results showed that a variety of antimicrobial resistance genes (ARGs), involving MLSB, tet, bla, multidrug, sul, MGEs and van genes and plentiful 9 bacterial phyla were identified in the raw wastewater. In addition to ERY, sulfamethoxazole (SMX) and tetracycline (TC) were also identified with the concentration of 3 order of magnitude lower than ERY. Results showed that the abatement of ARGs and antibiotics was much higher than that of antimicrobial activity and COD. With the absorbed dose of 50 kGy, the removal percentage of ARGs, ERY, antimicrobial activity and COD was 96.5-99.8%, 90.0%, 47.8% and 10.3%, respectively. The culturable bacteria were abated fast and completely at 5.0 kGy during gamma irradiation. The genus Pseudomonas was predominant in raw wastewater (56.7%) and its relative abundance decreased after gamma irradiation, to 1.3% at 50 kGy. With addition of peroxymonosulfate (PMS, 50 mM), the antimicrobial activity disappeared completely and ERY removal reached as high as 99.2% at the lower absorbed dose of 25 kGy. Ionizing radiation-coupled technique is a potential option to treat pharmaceutical wastewater for reduction of antibiotics, ARGs and antimicrobial activity.

High efficiency of osmotically stable laccase for biotransformation and micro-detoxification of levofloxacin in the urea-containing solution: Catalytic performance and mechanism

Laccase-catalyzed oxidation was applied in the biotransformation of levofloxacin (a potentially environmental antibiotic contamination); however, the enzyme may denature in urea-containing wastewater and lead to the formation of an inactive form followed by decreasing the yield of the bio-removal. In this study, the osmolytes-stabilized laccase was used to eliminate levofloxacin in the urea-containing solution. Sorbitol and proline 100 mM appeared to be the two most efficient laccase protectants against the urea-induced denaturation. In a 1-M urea solution, the maximum velocity (V_max) of laccase was estimated to be 39.1 μmol min^-1 mg^-1. This value was improved to 101.7 and 51.8 μmol min^-1 mg^-1 in the presence of sorbitol and proline, respectively. In optimal conditions for the elimination of levofloxacin, sorbitol- and proline-treated laccase led to 82.9 % and 76.2 % bio-removal of the applied fluoroquinolone in 1 M urea solution, respectively. Biotransformation products of the parent antibiotic were spectroscopically analyzed that assigned to different reaction pathways including demethylation, defluorination, decarboxylation, deamination, and hydroxylation. A micro-toxicity study concerning the growth of some Gram⁺ and Gram^- bacteria exhibited decreasing in inhibition of laccase-treated levofloxacin after a 10-h incubation at 37 °C.

A review of bismuth-based photocatalysts for antibiotic degradation: Insight into the photocatalytic degradation performance, pathways and relevant mechanisms

The intensive production and utilization of antibiotics worldwide has inevitably led to releases of very large amounts of these medicines into the environment, and numerous strategies have recently been developed to eliminate antibiotic pollution. Therefore, bismuth-based photocatalysts have attracted much attention due to their high adsorption of visible light and low production cost. This review summarizes the performance, degradation pathways and relevant mechanisms of typical antibiotics during bismuth-based photocatalytic degradation. First, the band gap and redox ability of the bismuth-based catalysts and modified materials (such as morphology, structure mediation, heterojunction construction and element doping) were compared and evaluated. Second, the performance and potential mechanisms of bismuth oxides, bismuth sulfides, bismuth oxyhalides and bismuth-based metal oxides for antibiotic removal were investigated. Third, we analysed the effect of co-existing interfering substances in a real water matrix on the photocatalytic ability, as well as the coupling processes for degradation enhancement. In the last section, current difficulties and future perspectives on photocatalytic degradation for antibiotic elimination by bismuth-based catalysts are summarized. Generally, modified bismuth-based compounds showed better performance than single-component photocatalysts during photocatalytic degradation for most antibiotics, in which h⁺ played a predominant role among all the related reactive oxygen species. Moreover, the crystal structures and morphologies of bismuth-based catalysts seriously affected their practical efficiencies.