A review on chemical coagulation/flocculation technologies for removal of colour from textile wastewaters

A review on application of phytoremediation technique for eradication of synthetic dyes by using ornamental plants

Phytoremediation emerges as an innovative and eco-friendly technique to remediate textile dyes with the use of various categories of plants. In recent years, ornamental plants emerge as more attractive and effective substitute in comparison to edible plants for phytoremediation. Regardless of aesthetic value, some ornamental plants can be grown to remediate the sites contaminated with dyes, heavy metals, pesticides, or other organic compounds. In this review, we focus on pioneer research on synthetic dye removal using ornamental plants and evaluate the phytoremediation capability of ornamental plants for treatment of textile effluent. This paper also emphasized specific ornamental plants having high accumulation and tolerance ability for removal of dyes. The mechanisms explored for the phytoremediation of dyes by ornamental plants have also been explained. This review will also be helpful for researchers for exploring more new ornamental plants in phytoremediation technique.

A Review of the Processes Associated with the Removal of Oil in Water Pollution

Water plays an essential role in production and refining processes. Many industries that use petrochemicals also require water, especially for cleaning purposes. The wastewaters released by these processes are often rich in petroleum pollutants, which requires significant treatment prior to disposal. The presence of petroleum contaminants in rivers and oceans is a significant threat to human health, as well as to many animal species. A current challenge for most industries and conventional effluent treatment plants is compliance with accepted disposal standards for oil-polluted wastewater. Of particular importance is the processing of dispersed oil in water, as well as oil in water emulsion. Conventional oil and water separation methods for processing oil in water contamination have several technology gaps in terms of applicability and efficiency. The removal and effective processing of dispersed oil and emulsions from oily wastewater is a costly and significant problem. The objective of this paper is to provide a review of the principles associated with oil in water emulsion separation, with the aim of providing a more definitive understanding of the terminology, processes, and methodologies, which will assist the development of a more efficient, innovative and environmentally friendly process for the separation of oily wastewater.

Remazol Brilliant Blue R (RBBR) dye and phosphate adsorption by calcium alginate beads modified with polyethyleneimine

This study concerns the preparation of novel adsorbent prepared from calcium alginate bead modified with polyethyleneimine (PEI-CaAlg). The adsorption capacity of the PEI-CaAlg was examined by Remazol Brilliant Blue R (RBBR) and phosphate adsorption. PEI-CaAlg showed high removal efficiencies for RBBR (90.48%) and phosphate (88.10%). The removal of both RBBR and phosphate onto the PEI-CaAlg followed the Freundlich isotherm and the second-order model. The adsorption was studied in terms of thermodynamic and found to be feasible and spontaneous in nature. The reusability of the modified alginate beads was also examined up to five cycles. The removal efficiency was 90.48% at the first cycle and decreased to 75.15% at the end of the fourth cycle. The adsorption of color and phosphate from real textile wastewater was also instigated. The removal efficiencies for color and phosphate ions reached 80.24% and 90.00%, respectively. Therefore, the prepared PEI-CaAlg can be considered as a novel, eco-friendly, and cost-effective adsorbent for simultaneous dye and phosphate adsorption. PRACTITIONER POINTS: This study aims to modify the surface of calcium alginate beads with polyethyleneimine (PEI). The adsorption of RBBR and phosphate by the modified alginate beads (PEI-CaAlg) was investigated. PEI is an organic polymer with a linear/branch shape, which can increase the active sites on the adsorbent surface. PEI has one nitrogen atom in every three atoms provides a positive charge that can complex with the negatively charged molecules. The adsorption of RBBR and phosphate were carried out onto PEI-CaAlg.

High flux and complete dyes removal from water by reduced graphene oxide laminate on Poly Vinylidene Fluoride/graphene oxide membranes

Dyes molecules are the most common pollutants of wastewater in the environment from the textile industry to numbers of technologies include dyeing, printing, and painting procedures. Among membrane-based separation approaches as established methods in the water treatment industry, polymers attracted massive attention in the production of membranes due to their low cost and high-performance filtration of pollutants. However, hydrophobicity and low speed of filtration along with limited decontamination performance against some of the dyes, demand new approaches and membranes to overcome drawbacks points. Herein, a new design introduced including a support layer made by Poly Vinylidene Fluoride (PVDF)/Graphene Oxide (PGO) composite membrane via immersion precipitation process and a thin layer (≤100 nm) of reduced graphene oxide (rGO) deposited (as an active layer) through a simple vacuum filtration method. It has been observed that the presence of the GO sheets in the PGO composite improved the hydrophilicity of the membrane, water flux (from ~90 L m^-2 h^-1 bar^-1 in pristine PVDF to ~1690 L m^-2 h^-1 bar^-1 in PGO), and anti-fouling property. By deposition of rGO laminate on PGO support, dyes separation as high as ~99% can be achieved for most of the cationic and anionic dyes due to electrostatic adsorption, π-π interactions and molecular sieving. This approach opens new insight on hybrid designs for graphene-polymers based membrane toward efficient and fast removal of pollutants from wastewater.

Study on the treatment of Cu2+-organic compound wastewater by electro-Fenton coupled pulsed AC coagulation

Electro-Fenton (EF) coupled with Pulsed alternating current coagulation (PACC) is an effective technology for the treatment of Cu²⁺-organic wastewater. In this study, the removal efficiency (R_e), electrical energy consumption (EEC) and removal mechanism of Cu²⁺-organic were analyzed and the optimal operation parameters were determined. SEM, EDS, XRD and FTIR were used to characterize the morphology, elemental composition, crystal structure, function groups of sludge produced in the EF-PACC. UV, ESR and GC-MS were employed to determine concentration of organic matter, existence of OH, middle products of decomposed organic matter in EF-PACC, respectively. The results show that under the optimal conditions of initial pH = 2.5, current density (j) = 2 A/m², initial c(Cu²⁺) = 50 mg/L, c(chemical oxygen demand, COD) = 500 mg/L, c[H₂O₂] = 10 mL/L, frequency (f) = 1 Hz, t = 20 min, the R_e(Cu²⁺) can reach 99.59%. R_e(COD) is 90.21%, EEC 1.695 × 10^-1 kWh/m³, and the amount of produced sludge (W_s) is 0.9283 kg/m³. Compared with single EF and PACC processes, the order of treatment efficiency is EF-PACC > EF > PACC. EF-PACC technique was a highly effective method in the treatment of Cu²⁺-organic compound wastewater. The EF-PACC coupled process includes that electrolyzed Fe³⁺ produces electrocoagulation and OH produces degradation of organic compounds. The combined action of the two effects can effectively remove Cu²⁺-organic from wastewater.

Deprotonation and aggregation of Al13 under alkaline titration: A simulating study related to coagulation process

Unraveling the transformation of coagulants and their interaction with contaminants at the micro-level is vital to advancing our understanding of the coagulation mechanism. To the best of our knowledge, the coagulation effectiveness of [AlO₄Al₁₂(OH)₂₄(H₂O)₁₂]⁷⁺ (Al₁₃), regarded as the dominant species in polyaluminum chloride (PACl), is highly related to its aggregation characteristic, but the detailed process of Al₁₃ aggregation in coagulation time scale was not well studies. Here we systematically studied the deprotonation and aggregation processes of Al₁₃ by alkaline titration to simulate the reaction in coagulation case. By reacting with OH^-, Al₁₃ can continuously lose protons regardless of pH until its positive charge was well neutralized. The initial Al₁₃ aggregates (Al₁₃agg) appeared at B of 2.70 and large Al₁₃agg was generated by coalescence of small initial Al₁₃agg. Most Al₁₃ polycations kept their main structure unchanged during aggregation and part was decomposed into monomers or oligomers. Density functional theory (DFT) results reveal that Al₁₃ becomes unstable after deprotonation, but the aggregation of Al₁₃ bridged by Al monomers can stabilize the polycations. Al₁₃ needs to be hydrolyzed before interacting with colloidal particles, but particles can promote the aggregation of Al₁₃ by weakening the repulsion force between the polymers. Strong and compact flocs can be generated induced by in-situ aggregation of Al₁₃ in neutral and alkaline conditions. This study can provide a deep understanding about the role of Al₁₃agg in removing particles and instruct the development of new efficient coagulants against the various water qualities.

β-cyclodextrin-containing polymer based on renewable cellulose resources for effective removal of ionic and non-ionic toxic organic pollutants from water

A novel, bio-derived cyclodextrin-based trifunctional adsorbent has been successfully synthesized for efficient, rapid and simultaneous removal of a broad-spectrum of toxic ionic (anionic and cationic dyes) and non-ionic organic pollutants from water. The composition, morphology and the presence of functional groups in the obtained sorption material were characterized by elemental analysis, XRD, SEM, and FTIR spectroscopy. The adsorption results were represented by cationic dye (crystal violet, CV) and endocrine disrupting compound (bisphenol A, BPA) as an adsorbate. The sorption processes of the model pollutants were studied with both kinetic and equilibrium models. The results showed that the sorption was rapid (less than 1 min) and the time evolution could be fitted using a pseudo-second order model. According to Langmuir isotherm model, the maximum adsorption capacities were found at 113.64 and 43.10 mg g^-1 for BPA and CV, respectively. The adsorption ability of β-CDPs was kept nearly on the same level after five regeneration cycles. Furthermore, almost complete removal of the pollutants was observed during the treatment of real effluents samples thus the bio-derived, cheap and reusable BAN-EPI-CDP has a promising potential for practical applications.

Ceramic membrane overview and applications in textile industry: a review

The importance of water recovery and reuse is increasing day by day. Therefore, the use of advanced technologies is applied for the treatment and recovery of textile wastewater. The fact that ceramic membranes are resistant to the challenging characteristics of textile wastewater makes the use of ceramic membranes useful. Within the scope of this review, general information about the textile industry and treatment techniques are mentioned, as well as the properties of ceramic membranes and textile wastewater treatment. In the literature review made in this study, recent studies on the production of ceramic membranes and laboratory applications have been compiled. However, it has been observed that although the real-scale studies are relatively higher in industries such as the food and petrochemical industry, it is rather limited in the textile industry.

Optimization of the electrochemical oxidation of textile wastewater by graphite electrodes by response surface methodology and artificial neural network

In this study, electrochemical oxidation of combed fabric dyeing wastewater was investigated using graphite electrodes. The response surface methodology (RSM) was used to design the experiments via the central composite design (CCD). The planned experiments were done to track color changes and chemical oxygen demand (COD) removal. The experimental results were used to develop optimization models using RSM and the artificial neural network (ANN) and they were compared. The developed models by the two methods were in good agreement with the experimental results. The optimum conditions were found at 150 A/m², pH 5, and 120 min. The removal efficiencies for color and COD reached 96.6% and 77.69%, respectively. The operating cost at the optimum conditions was also estimated. The energy and the cost of 1 m³ of wastewater required 34.9 kWh and 2.58 US$, respectively. The graphite electrodes can be successfully utilized for treatment of combed fabric dyeing wastewater with reasonable cost.

Facile Synthesis of ZnO Nanoparticles for the Photodegradation of Rhodamine-B

River pollution is a problem that is still very poorly handled. Industrial growth is the most significant contributor to produce this wastewater. The industry produces liquid waste such as dyes that do not meet handling standards because of the high cost. Photocatalyst is way better than other methods such as adsorption, coagulation, fluctuation, and others. However, there are still many shortcomings of the existing methods, such as high cost, high temperature, and dangerous by-products. This research seeks to provide a solution by synthesizing zinc oxide (ZnO) nanoparticles as a photocatalyst to reduce rhodamine B dye under visible light irradiation. ZnO nanoparticles were successfully synthesized through a simple sol-gel method in the form of a white powder by heating at a low temperature, 60°C. The XRD results show that the results have a diffraction peak that follows the standard ZnO with a hexagonal wurtzite crystal structure. According to the Scherrer equation, the crystal has a size of 22.61 nm. SEM analysis showed that the particle morphology and particle size were homogeneous with a spherical shape, ranging from 22-24 nm. Optimal ZnO photocatalytic activity at 90 minutes with an efficiency of 98.83%.

Sustainable Adsorption Method for the Remediation of Crystal Violet Dye Using Nutraceutical Industrial Fenugreek Seed Spent

Nutraceutical industrial fenugreek seed spent (NIFGS), a relatively low-cost material abundantly available with little toxicity is used in crystal violet (CV) dye remediation from aqueous media and reported in the present study. To access the adsorption capacity, the factors affecting it are kinetics and the equilibrium thermodynamics. All the experiments were designed at approximately pH 7. The adsorption isotherm model proposed by Langmuir fits better than the Freundlich isotherm model. Kinetic studies data confirm the pseudo-second order model. It is evident from thermodynamic parameter values that the process of adsorption is endothermic, physical and dynamic. The process optimization of independent variables that influence adsorption was carried out using response surface methodology (RSM) through bi-level fractional factorial experimental design (FEED). The analysis of variance (ANOVA) was implemented to investigate the combined effect of parameters influencing adsorption. The possibilities of using dye-adsorbed NIFGS (“sludge”) for the fabrication of the composites using plastic waste are suggested.

Functional chitosan/glycidyl methacrylate-based cryogels for efficient removal of cationic and anionic dyes and antibacterial applications

In this study, we constructed a novel family of chitosan-based cryogels with antibacterial activity to treat different types of dye wastewater. Glycidyl methacrylate (GMA) cross-linked chitosan (CS) cryogels functionalized with negatively and positively molecules were prepared via thermo-crosslinking and freeze-drying methods. These chitosan-based cryogels present a well-defined three-dimensional microporous network structure with ultra-light and high porosity, and have high water absorption ability. For CS/GMA/SMA cryogels, 71.20% of Cationic Yellow X-8GL (CY) can be removed, and the process kinetics well corresponded to the Pseudo-second order model and Freundlich model. The quantity and percent of Reactive Yellow B-4RFN (RY) removal by CS/GMA/DMC cryogel reached at 224.6 mg/g and 96.11%, which closely fitted the Pseudo-second order model and Dubinin-Radushkevich isotherm. Furthermore, the chitosan-based cryogels showed antibacterial efficacies against E. coli and S. aureus. The prepared chitosan-based cryogels with adsorption and antibacterial properties have great potential for the remediation of dyeing wastewater.

Evaluation of the most promising techniques overcoming the algal problems takes place during the purification of drinking water

This work aims to study the technical problems of algal blooms that hinder the purification process of surface water used for drinking purposes and not its harmful effect on human health and the surrounding environment. It is also related to the demonstration of the improved coagulation process as an efficient technique in the algal removal from surface water by its application in jar tests. The study was carried out in the water purification plant in Nazlet Abdellah near the city of Assiut, Egypt. To achieve that, many ores and natural materials which aid in the removing of the algal blooms from surface water during the purification processes were tested. The examined materials should be technically and economically proper for improving the removal of algae from treated surface water for drinking purposes. The results showed that the kaolinite and bentonite (K and B) when coupled separately with aluminum sulfate (alum.) (the main coagulant agent) associated with the raw surface water in the flocculation basin were more efficient in the algae removal from treated surface water before reaching the sand filters by ratio up to 90%.

Sorption of brilliant green dye using soybean straw-derived biochar: characterization, kinetics, thermodynamics and toxicity studies

The present study was aimed to investigate brilliant green (BG) dye sorption onto soybean straw biochar (SSB) prepared at 800 °C and further understanding the sorption mechanism. Sorption kinetic models such as pseudo-first and pseudo-second order were executed for demonstrating sorption mechanism between the dye and biochar. Results of kinetics study were fitted well to pseudo-second-order kinetic model (R2 0.997) indicating that the reaction followed chemisorption mechanism. Furthermore, the effect of various parameters like sorbent dose, dye concentration, incubation time, pH and temperature on dye sorption was also studied. The maximum dye removal percentage and sorption capacity for SSB (800 °C) within 60 min were found to be 99.73% and 73.50 mg g- 1, respectively, at pH 8 and 60 °C temperature, whereas adsorption isotherm studies showed a higher correlation coefficient values for Freundlich model (R2 0.990-0.996) followed by Langmuir model suggesting that sorption process was multilayer. The characterization of biomass and biochar was performed with the aid of analytical techniques like scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) theory, X-ray diffraction (XRD) and thermo-gravimetric analysis (TGA). FTIR analysis showed active groups on biochar surface. BET study revealed higher surface area of biochar (194.7 m2/g) than the biomass (12.84 m2/g). Besides, phyto- and cytogenotoxic studies revealed significant decrease in the toxicity of dye containing water after treating with SSB. Therefore, this study has proved the sorption potential of soybean straw biochar for BG dye and could be further considered as sustainable cost-effective strategy for treating the textile dye-contaminated wastewater.

Application of QSAR for the identification of key molecular fragments and reliable predictions of effects of textile dyes on growth rate and biomass values of Raphidocelis subcapitata

The current quantitative structure-activity relationship (QSAR) study seeks to explore the underlying causes of fluctuations in growth rate and biomass of microalgae mainly due to textile dyes. The derived QSAR models cover two endpoints: ErC50 (growth rate) and EbC50 (biomass) of Raphidocelis subcapitata. In order to extract the structural features involved, multiple PLS (partial least squares) models have been developed with easy to interpret and uncomplicated 2D descriptors having proper physico-chemical meaning. These descriptors were calculated from Dragon, SiRMS, and PaDEL-descriptor software. Then, the models were developed initially using stepwise regression followed by partial least squares (PLS) regression, and the model development procedure for both the endpoints (ErC50 and EbC50) followed the stringent Organization for Economic Cooperation and Development (OECD) rules. Later on, the model validation was carried out with statistically significant and internationally accepted metrics (both internally and externally) in both the cases. Next, we have used the "Intelligent Consensus Predictor" tool (available from http://teqip.jdvu.ac.in/QSAR_Tools/DTCLab/) to test the prediction quality with an "intelligent" approach to select multiple models. The estimated prediction quality for the appropriate test sets reveals that the consensus models (CM) surpass the quality shown by individual models (IM) for both the endpoints (ErC50 and EbC50). Finally, the developed models were able to identify the major contributing features (hydrophobic units, unsaturation, saturation, electronegativity, branched atoms and charged fragments) related to aquatic toxicity of textile dyes.

Textile Dye Biodecolorization by Manganese Peroxidase: A Review

Wastewater emissions from textile factories cause serious environmental problems. Manganese peroxidase (MnP) is an oxidoreductase with ligninolytic activity and is a promising biocatalyst for the biodegradation of hazardous environmental contaminants, and especially for dye wastewater decolorization. This article first summarizes the origin, crystal structure, and catalytic cycle of MnP, and then reviews the recent literature on its application to dye wastewater decolorization. In addition, the application of new technologies such as enzyme immobilization and genetic engineering that could improve the stability, durability, adaptability, and operating costs of the enzyme are highlighted. Finally, we discuss and propose future strategies to improve the performance of MnP-assisted dye decolorization in industrial applications.

Photocatalytic Treatment of Wastewater Containing Simultaneous Organic and Inorganic Pollution: Competition and Operating Parameters Effects

In the present study, methylene blue (MB) removal from aqueous solutions via the photocatalytic process using TiO2 as a catalyst in the presence of external ultra-violet light (UV) was investigated. The results of adsorption in the absence of UV radiation showed that adsorption reached an equilibrium state at 60 min. The experimental kinetic data were found to be well fitted by the pseudo-second-order model. Furthermore, the isotherm study suggested that dye uptake by TiO2 is a chemisorption process with a maximum retention capacity of 34.0 mg/g. The photodegradation of MB was then assessed under various experimental conditions. The related data showed that dye mineralization decreased when dye concentrations were increased and was favored at high pH values and low salt concentrations. The simultaneous presence of organic and inorganic pollution (Zinc) was also evaluated. The effect of the molar ratio Zn2+/MB+ in the solution at different pH values and NaCl concentrations was also monitored. The corresponding experimental results showed that at low values of Zn2+ in the solution (30 mg/L), the kinetic of the MB removal became faster until reaching an optimum at Zn2+/MB+ concentrations of 60/60 mg/L; it then slowed down for higher concentrations. The solutions’ carbon contents were measured during the degradation process and showed total mineralization after about 5 h for the optimal Zn2+/MB+ condition.

Visible-light driven rapid bacterial inactivation on red phosphorus/titanium oxide nanofiber heterostructures

Photocatalytic water disinfection has emerged as a promising approach for water purification. However, exploring efficient and rapid visible light driven materials for photocatalytic bacterial inactivation is still a challenging problem. Herein, red phosphorus/titanium oxide (TiO₂@RP) nanofibers were developed for effective water disinfection by a vacuum ampoule strategy. The complete E. coli and S. aureus (7-log CFU mL^-1) could be rapidly killed within 25 min and 30 min over the optimized TiO₂@RP heterostructure under the white LED irradiation. The efficient photocatalytic antibacterial activity should be mainly ascribed to the synergetic enhancement in light absorption by RP decoration and charge migration and separation by the interface between TiO₂ and RP. And then more unpaired photo-carriers would be transferred to the surface to facilitate the generation of photo-holes, •O₂^- radicals, and H₂O₂ species, which could destroy the bacterial cells efficiently.

Construction of a mixed ligand MOF as "green catalyst" for the photocatalytic degradation of organic dye in aqueous media

In the past few years, metal-organic frameworks (MOFs) have emerged as a class of fascinating materials for photocatalysis. Herein, a new MOF formulated as [Zn(bpe)(fdc)]·2DMF (BUT-206, bpe = 1,2-bis(4-pyridyl) ethylene, H2fdc = 2,5-furan dicarboxylic acid, DMF = N,N-dimethylformamide) is reported, which was synthesized under solvothermal conditions and applied for photocatalytic degradation of dyes (crystal violet and rhodamine B). Noteworthily, BUT-206 exhibited high photocatalytic activity toward the degradation of crystal violet without using any photosensitizer or cocatalyst under UV-irradiation. The photocatalytic degradation of crystal violet by BUT-206 was effective with a degradation efficiency of 92.5% within 120 minutes. The effects of key parameters including pH, amount of photocatalyst and initial concentration of dye on the dye degradation processes were examined, and the kinetics of dye degradation was established by the pseudo-first order kinetic equation. Furthermore, BUT-206 showed good cyclic stability in photocatalytic performance for up to five regeneration cycles, making it a potential green catalyst for dye degradation.

Removal of COD, aromaticity and color of a pretreated chemical producing industrial wastewater: a comparison between adsorption, ozonation, and advanced oxidation processes

A wide range of products are produced in the chemical producing industry such as textile dyes, chemicals, printing dyes and chemicals, paper chemicals, electrostatic powder dyes, and optical brighteners. The aim of this study is to investigate the treatability of chemical oxygen demand (COD), aromaticity, and color in the wastewater of this sector, where highly complex chemicals are used. Most of the studies in the literature are related to the treatment of synthetically prepared dyed wastewater. This study is important as it is carried out with real wastewater and gives results of many treatment methods. In the study, COD, UV-vis absorbance, and color values were attempted to be removed from the wastewater of a chemical producing industry that was pretreated by coagulation-flocculation. The COD value of the pretreated wastewater discharged to the central treatment system was restricted as 1000 mg/L. Pretreated wastewater characterization is as follows: COD: 2117 mg/L, UV-vis absorbance values at; 254 nm: 9.91, 280 nm: 8.65, 341 nm: 12.77, 436 nm: 5.01, 525 nm: 2.24, and 620 nm: 1.59. In the study, adsorption, ozonation, and advanced oxidation processes (Fenton and persulfate oxidation) were used to remove COD and UV-vis absorbance values (aromaticity, organics, and color). The method by which the best removal efficiency was obtained for all parameters was the adsorption process using powdered activated carbon (PAC). The equilibrium PAC dose was found as 6 g/L. At this adsorbent dose, the removal efficiencies of UV-vis absorbance values were all around 99% and the efficiency of COD removal was 77%. The Langmuir isotherm constants were found to be q_max= 30.4 mg/g and K_L = 487.9 (L/mg). The COD concentration at this adsorbent dose was 486 mg/L and wastewater was suitable for discharge to the central wastewater treatment plant in that region.

Molecular characterization of marine bacterial isolates of Visakhapatnam coast-efficacy in dye decolorization and bioremediation of cadmium

Background

Microbial community is one of the diversified communities of the marine environment. Studies have shown that microorganisms isolated from the marine environment are metabolically active and have adapted to life in the ocean. The marine microorganisms use various survival strategies to combat heavy metal stress and decolorization of various textile dyes, thus playing an important role in the bioremediation of cadmium and degradation of textile dyes. The present study deals with the isolation and 16S rRNA molecular characterization of M3 and M8 bacterial strains isolated from marine water samples collected from Visakhapatnam harbor. M3 and M8 isolates were also checked for their efficacy in the removal of cadmium and decolorization of various textile dyes from the environment.

Results

The water sample was subjected to tube dilution method to isolate bacterial strains, and ten different isolates were screened. The biochemical tests were performed for the isolates to prove their validity and 16S rRNA molecular sequencing and phylogenetic analysis for species identification. Out of interest, two bacterial strains, namely, M3 and M8 were subjected to 16S rRNA molecular sequencing and phylogenetic analysis and were identified as Bacillus subtilis and Pseudomonas resinovorans. The two bacterial strains showed promising dye degradation property when checked with nine different textile dyes of wavelength ranging from 400 to 600 nm and removal of cadmium from the growth medium.

Conclusion

The present study demonstrates the isolates M3 and M8 to be potential strains having dye decolorization and bioremediation of cadmium applications.

Supplementary Information

The online version contains supplementary material available at 10.1186/s43141-021-00189-0.

Microbial degradation of azo dyes by textile effluent adapted, Enterobacter hormaechei under microaerophilic condition

Landmark and sustainable eco-friendly dye treatment processes are highly desirous to ameliorate their effect on the environment. The present study investigated the azo dye degradation efficiency of adapted Enterobacter hormaechei SKB 16 from textile effluent polluted soil in optimized culture conditions. The adapted bacteria strain was identified by standard microbiological and molecular techniques. E. hormaechei was tested individually for the decolourizing of Reactive Yellow 145 (RY 145) and Reactive Red F3B (RR 180) dyes under optimized conditions of pH, temperature and dye concentration on decolourization were studied. The adapted bacteria strain exhibited maximum decolourization (98 %) of Reactive yellow 145 and Reactive red 180 in 100 ppm concentration at pH 7, temperature 37 °C after 98 h of incubation. The enzyme analyses revealed that azo reductase and laccase played major roles in the cleavage of the azo bond and desulfonation respectively of both dyes during degradation. The metabolites were further characterized by Fourier Transform Infrared Spectroscopy (FT-IR), High-Performance Liquid Chromatography (HPLC), and Gas Chromatography-Mass Spectrometry (GCMS). Thereafter, degradation was deduced based on changes of the functional group, variation in retention times and mass/charge ratio and molecular weight. This study elucidated the promising potentials of adapted SKB 16 strain in the eco-friendly removal of textile azo dyes. In addition, repeatability and sustainability are enhanced due to effective management of time which would have been spent on rigorous and extensive screening process.

Removal of Disperse Blue 56 from synthetic textile effluent using ionic flocculation

The textile industry is one of the main generators of industrial effluent due to the large volumes of water containing a wide variety of pollutants, including dyes. Thus, the present study aimed to remove the Disperse Blue 56 dye present in synthetic textile effluent using ionic flocculation through surfactant flocs produced from animal/vegetable fat, assessing the system at different surfactant concentrations and temperatures. The process kinetics, adsorption mechanism and equilibrium were evaluated. The results show that the kinetics was better described by the Elovich model when compared to pseudo-first order and pseudo-second order models, indicating that chemical adsorption occurs during the process. The study of the adsorption mechanism obtained lower outer layer diffusivities than their intra-particle counterparts, demonstrating that the dye transport to the surfactant floc is controlled through the outer layer. The Langmuir isotherm was suitable for equilibrium data and the separation factor calculated showed that the isotherm is classified as favorable. Dye removal efficiency reached 87% after 360 minutes of contact between the effluent and the surfactant flocs, indicating that ionic flocculation is an efficient alternative in the treatment of textile effluent containing disperse dye.

Simultaneous Carbon and Nitrogen Removal from Domestic Wastewater using High Rate Vermifilter

Being a cost-effective and environmentally benign technology, vermifiltration has significantly replaced the available conventional wastewater remediation methods in many cases over the last few decades. The present work emphasizes on the investigation of the nitrogen transformation dynamics, in addition to the organic carbon abatement in the designed high rate hybrid vermifilter. Moreover, the economical sustainability of the vermifiltration technology has also been enlightened by creating a bridge with the concept of circular bio-economy. The designed high rate macrophyte-assisted vermifilter (MAVF) ascertained significant high nitrogen and organic carbon removal efficiencies from the real domestic sewage, considering the chemical oxygen demand (COD) of the influent and hydraulic loading rate (HLR) as the input variables. The designed MAVF facilitated the maximum ammonium nitrogen (NH4 +-N), organic nitrogen, and total kjeldahl nitrogen removal efficiencies up to 98.2 ± 0.70%, 100%, and 99 ± 0.47%, respectively when COD of the influent and HLR were 200 ± 25 mg/L and 3 ± 0.1 m3/m2-d, respectively. On the other hand, substantial enhancement in the nitrate nitrogen (NO3 --N) in the effluent (73 ± 10.55 times its influent concentration) was observed with influent COD of 200 ± 25 mg/L and HLR of 7 ± 0.2 m3/m2-d. When the influent COD and HLR were maintained at 700 ± 45 mg/L and 3 ± 0.1 m3/m2-d, respectively, the highest total nitrogen removal of 87 ± 2.25% was obtained. Alternatively, the influent COD of 200 ± 25 mg/L and HLR of 3 ± 0.1 m3/m2-d yielded the highest COD removal efficiency of 77 ± 1.59%. Hence, the outcome of the present research work strengthens the suitability of the vermifiltration technology as an economically and ecologically sound natural wastewater bio-remediation technology for the treatment of domestic wastewater.

Trimeric Cationic Surfactant Coacervation as a Versatile Approach for Removing Organic Pollutants

A versatile method to remove a broad spectrum of dye pollutants from wastewater rapidly and efficiently is highly desirable. Here, we report that the complex coacervation of cationic trimeric imine-based surfactants (TISn) with negatively charged hydrolyzed polyacrylamide (HPAM) can be used for this purpose. The coacervation occurs in a wide concentration and composition range and requires the HPAM and TISn concentrations as low as 0.1 g/L and 0.1 mM, respectively. Dye effluents treated by trimeric surfactants and HPAM complete phase separation within 30 s under turbulent conditions, which generates an exceedingly small volume fraction (0.4%) of viscoelastic coacervate and a clear supernatant with a dye removal efficiency of up to 99.9% for anionic and neutral dyes in dosages of up to 120 mg/L. Crowded molecular arrangement and thick framework in coacervate are responsible for the rapid phase separation rate and low volume fraction. The trimeric imine surfactant/polymer coacervation provides a simple, effective, and sustainable approach for the rapid removal of dyes and other organic pollutants.

Cellulose Acetate Hollow Fiber Membranes from Banana Stem Fibers Coated by TiO2 for Degradation of Waste Textile Dye

Cellulose acetate hollow fiber membrane from banana stem fibers coated by TiO2 (CAHFMT) was prepared and characterized as an alternative material for degradation of waste textile dye. Its applicability was demonstrated by mechanical properties, FTIR, SEM, thermal resistance, performance, and degradation efficiency. Cellulose acetate (CA) was synthesized from banana stem fibers by swelling stage, acetylation reaction, and hydrolysis reaction. CA was modified using TiO2 of various concentrations. CAHFMT with 22 % w/v dope concentration has the optimum mechanical properties (stress, strain and Young’s modulus), as well as hydrophilic properties. The performances of CAHFMT with Congo red were determined. The SEM results showed that the membrane had rigid pores. Moreover, this research stated that CAHFMT could be a solution to overcome economical and effective problems.

Highlighting the cathodic contribution of an electrooxidation post-treatment study on decolorization of textile wastewater effluent pre-treated with a lab-scale moving bed-membrane bioreactor

This study is carried out to investigate the effect of the cathodic contribution in the performance of electro-oxidation process for decolorization of the textile wastewater effluent pre-treated with a lab-scale moving bed-membrane bioreactor. For this purpose, titanium dioxide (TiO2) was used as anode electrode and four different cathodic electrode materials: Graphite, TiO2, TiO2-coated Platine, and TiO2-coated ruthenium dioxide (RuO2) (namely RuO2) were tested and compared for their color removal efficiencies. Besides, the optimization parameters that affect color removal in correspondence to the electrode materials, such as applied current, electrolysis time, and pH were studied. In this context, the optimum parameters for each electrode material were selected, and the color removal percentages were found as 92.95%, 91.58%, 91.40%, and 89.17% for TiO2/Graphite, TiO2/Platine, TiO2/TiO2, and TiO2/RuO2, respectively. Finally, the operational cost for each of the tested cathodic electrode materials was calculated in each of the studied optimization parameters making it easier and practical for the selection and evaluation of the electrode materials by the readers. The correlation coefficients (R2) were 81.2%, 87.1%, 86.7%, and 88.6% respectively as a result of the optimization study using the nonlinear regression modeling.

Persistent organic and inorganic pollutants in the effluents from the textile dyeing industries: Ecotoxicology appraisal via a battery of biotests

Today, the textile industry is considered as a leading economic sector in Tunisia. However, this sector demands a huge volume of water and a wide spectrum of chemicals, which is converted into potentially toxic wastewater leading to environmental perturbation and human health toxicity. Assessment of the environmental risks associated with textile wastewater becomes a necessity. In this study, textile dyeing wastewater samples were collected before and after the physico-chemical treatment carried out by textile companies located in Monastir-city-Tunisia and subjected to chemical analyzes in order to determine their physicochemical characteristics and the content of metals and textile dyes. The ecotoxicological assessment was performed using four organisms, namely Selenastrum capricornutum, Vibrio fischeri, Daphnia magna and Lepidium sativum, to represent different trophic levels. Based on chemical data, some physicochemical parameters (e.g. TSS, COD and TSS levels) and metals (e.g. Cr, Hg and Sb) in the textile dyeing effluents were revealed not in compliance with the Tunisian standard. Moreover, high quantities of three disperse dyes have been detected even in the textile dyeing wastewater samples before and after treatments. The ecotoxicological data confirmed that the textile dyeing influents displayed toxic effects to all the test organisms, with Selenastrum capricornutum being the most sensitive organism. While, the above toxic effects were decreased slightly when evaluating the treated effluents. Metals and textile disperse dyes could be associated with the observed toxic effects of the textile influents and effluents. In fact, the treatment process applied by the evaluated companies was only partially efficient at removing metals, disperse dyes and effluent ecotoxicity, suggesting potential risks to aquatic biota. These findings emphasize the importance of applying integrated chemical and biological approaches for continuous evaluation of the toxicity of the treated effluents to predict hazards on the environment.

Current status of textile wastewater management practices and effluent characteristics in Tanzania

Textile wastewater from wet processing units is a major environmental problem. Most chemicals, including dyes, are only partly consumed, resulting in highly colored wastewater containing a variety of chemicals released into the environment. This paper gives information on the current management of textile wastewater in Tanzania. A semiquantitative analysis was done to identify the main types of chemicals used in wet processing units, wastewater characteristics and existing wastewater treatment methods in the textile industry. The performance evaluation of the existing wastewater treatment plants is also discussed. The advantages of integrating constructed wetlands with the existing treatment facilities for textile wastewater are explained. It has been observed that pretreatment and dying/printing of the fabrics are the main two processes that produce wastewater in many textile companies. Main pollutants are chemicals used from pretreatment and materials removed from de-sizing, bleaching and scouring processes. Dyes, printing pigments and dye auxiliaries are the main pollutants from the dyeing/printing process. Most of the textile companies in Tanzania are equipped with effluent treatment plants. Wastewater treatment plants have basically similar units, which are coagulation-flocculation, sedimentation through clarifiers and aerobic reactor. However, their effluents do not meet discharge limits stipulated by the Tanzania Bureau of Standards (TBS).

Magnetic Metal Organic Framework Immobilized Laccase for Wastewater Decolorization

The laccase enzyme was successfully immobilized over a magnetic amino-functionalized metal–organic framework Fe3O4-NH2@MIL-101(Cr). Different techniques were used for the characterization of the synthesized materials. The Fe3O4-NH2@MIL-101(Cr) laccase showed excellent resistance to high temperatures and low pH levels with a high immobilization capacity and large activity recovery, due to the combination of covalent binding and adsorption advantages. The long-term storage of immobilized laccase for 28 days indicated a retention of 88% of its initial activity, due to the high stability of the immobilized system. Furthermore, a residual activity of 49% was observed at 85 °C. The immobilized laccase was effectively used for the biodegradation of Reactive Black 5 (RB) and Alizarin Red S (AR) dyes in water. The factors affecting the RB and AR degradation using the immobilized laccase (dye concentration, temperature and pH) were investigated to determine the optimum treatment conditions. The optimum conditions for dye removal were a 5 mg/L dye concentration, temperature of 25 °C, and a pH of 4. At the optimum conditions, the biodegradation and sorption-synergistic mechanism of the Fe3O4-NH2@MIL-101(Cr) laccase system caused the total removal of AR and 81% of the RB. Interestingly, the reusability study of this immobilized enzyme up to five cycles indicated the ability to reuse it several times for water treatment.

State-of-the-Art and Opportunities for Forward Osmosis in Sewage Concentration and Wastewater Treatment

The application of membrane technologies for wastewater treatment to recover water and nutrients from different types of wastewater can be an effective strategy to mitigate the water shortage and provide resource recovery for sustainable development of industrialisation and urbanisation. Forward osmosis (FO), driven by the osmotic pressure difference between solutions divided by a semi-permeable membrane, has been recognised as a potential energy-efficient filtration process with a low tendency for fouling and a strong ability to filtrate highly polluted wastewater. The application of FO for wastewater treatment has received significant attention in research and attracted technological effort in recent years. In this review, we review the state-of-the-art application of FO technology for sewage concentration and wastewater treatment both as an independent treatment process and in combination with other treatment processes. We also provide an outlook of the future prospects and recommendations for the improvement of membrane performance, fouling control and system optimisation from the perspectives of membrane materials, operating condition optimisation, draw solution selection, and multiple technologies combination.

Facile fabrication of novel magnetic ZIF-67 MOF@aminated chitosan composite beads for the adsorptive removal of Cr(VI) from aqueous solutions

Metal organic frameworks (MOFs) have become premium candidates for the removal of hazardous contaminants from wastewater. However, MOFs have a vast obstacle which is their poor recyclability. In this study, ZIF-67 was decorated with magnetic Fe₃O₄ nanoparticles, and then embedded into aminated chitosan (AmCs) matrix to form core-dual shell Fe₃O₄/ZIF-67@AmCs composite beads. Diverse analysis tools were utilized to ensure the successful fabrication of the magnetic composite beads. The fabricated magnetic composite beads were examined their adsorptive removal aptitude towards toxic Cr(VI) ions. The gained results refereed that a maximum adsorption capacity of 119.05 mg/g was attained by magnetic Fe₃O₄/ZIF-67@AmCs composite beads at 25 °C. The process obeyed both of Langmuir and Freundlich isotherm models, and the pseudo 2nd order was more suitable kinetic model to represent the adsorption process. Besides, Fe₃O₄/ZIF-67@AmCs composite showed an excellent recyclability for the removal of Cr(VI) ions from their aqueous solutions for seven consecutive cycles.

Watermelon rinds as cost-efficient adsorbent for acridine orange: a response surface methodological approach

In the current investigation, watermelon rinds (WMR) have been utilized as an eco-friendly and cost-efficient adsorbent for acridine orange (AO) from contaminated water samples. Adsorption of AO onto raw (RWM) and thermally treated rinds (TTWM250 and TTWM500) has been studied. The adsorption efficiency of the three adsorbents was evaluated by measuring the % removal (%R) of AO and the adsorption capacity (q_e, mg/g). Dependent variables (%R and q_e) were optimized as a function of four factors: pH, sorbent dosage (AD), the concentration of AO (DC), and contact time (ST). Box-Behnken (BB) design has been utilized to obtain the optimum adsorption conditions. Prepared adsorbents have been characterized using scanning electron microscopy (SEM), Fourier-transform infrared (FT-IR), and Raman spectroscopies. The surface area of RWM, TTWM250, and TTWM500, as per the Brunauer-Emmett-Teller (BET) analysis, was 2.66, 2.93, and 5.03 m²/g, respectively. Equilibrium investigations suggest that Freundlich model was perfectly fit for adsorption of AO onto TTWM500. Maximum adsorption capacity (q_max) of 69.44 mg/g was obtained using the Langmuir equation. Adsorption kinetics could be best described by the pseudo-second-order (PSO) model. The multi-cycle sorption-desorption study showed that TTWM500 could be regenerated with the adsorption efficiency being preserved up to 87% after six cycles.

Efficient Removal of Methylene Blue from Aqueous Solutions Using a High Specific Surface Area Porous Carbon Derived from Soybean Dreg

Porous carbon material with high specific surface area was prepared from soybean dreg by a simple and effective two-step method (high temperature pyrolysis and activation). The structural characteristics of the synthesized carbon were evaluated by Brunauer-Emmett-Teller (BET), N₂ adsorption/desorption measurements/techniques, an elemental analyzer (EA), scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscopy (TEM), an X-ray diffractometer (XRD), Raman spectroscopy (Raman), a Fourier transform infrared spectrometer (FTIR), and X-ray photoelectron spectroscopy (XPS). The specific surface area of SDB-6-K was 2786 m² g^-1, the pore volume was 2.316 cm³ g^-1, and the average pore size was 3.326 nm. The high specific surface area and effective functional groups of carbon material promoted the adsorption of methylene blue. The maximum adsorption capacity of SDB-6-K to methylene blue was 2636 mg g^-1 at 318 K. The adsorption kinetic and isotherm data were most suitable for pseudo-second-order and Langmuir equations. The results showed that the adsorbent had excellent adsorptive ability and had good practical application potential in the field of dye wastewater treatment in the future.

High effective removal of diazinon from aqueous solutions using the magnetic tragacanth-montmorillonite nanocomposite: isotherm, kinetic, and mechanism study

Health and environmental impact of pesticide contamination of groundwater has been reported repeatedly in many studies. The removal of diazinon from agricultural wastewater is still of great interest due to using widely in many developing countries. In the presented study, the magnetic tragacanth-montmorillonite nanocomposite was utilized as an adsorbent to remove diazinon from an aqueous solution. The adsorbent properties were characterized using FE-SEM, EDX, FTIR, XRD, BET, and VSM techniques. The influence of adsorbent dosage, pH, contact time, and initial concentration of diazinon was studied in a batch system. Different adsorption kinetics and isotherm models were used to describe the kinetic and equilibrium data. The results indicated that the adsorption kinetic was fitted better with a Elovich kinetic model, and the adsorption isotherm was well described by the Langmuir-Freundlich model, and the maximum adsorption capacity was 416 mg g^-1. According to Weber and Morris's model and Boyd plot, the results demonstrated that the adsorption kinetic was controlled simultaneously by film diffusion and intraparticle diffusion. Besides, a thermodynamic study showed that the removal of diazinon is an endothermic process. Considering the results, magnetic tragacanth-montmorillonite nanoadsorbent has a high capability to remove diazinon from aqueous solution.