Occurrence of antibiotics in the aquatic environment

Occurrence and risk assessment of fluoroquinolone antibiotics in reclaimed water and receiving groundwater with different replenishment pathways

Artificial recharge to groundwater with reclaimed water is considered a promising method to alleviate groundwater depletion and over-exploitation. However, the occurrence of fluoroquinolone antibiotics (FQs) was ubiquitous in wastewater, surface water, groundwater and even drinking water threating human health and ecology. In this study, the occurrence of six selected FQs in reclaimed water effluent and their removal by tertiary treatment units were investigated. The overall removal efficiencies in average of the tertiary treatment processes in Beijing and Changzhou were ranging from 21.2% to 55.2%. Activated carbon exhibited better performance for FQs removal than ozone and biological treatment such as membrane bioreactor, anaerobic-anoxic-oxic and biofilter. The results of two pilot study showed that the impact of reclaimed water to groundwater quality in terms of FQs concentration by direct injection in GBD was stronger than surface spreading in Changzhou, which might be due to the recharge strategy and the physical and chemical characteristics of sediment and aquifer soil. The hazard quotient (HQ) values of ofloxacin (OFL) in reclaimed water was up to 12.54, indicating the extreme eco-toxicological risk, while enrofloxacin (ENR) exhibited medium risk. After recharge with reclaimed water, the HQ values of OFL and ENR in groundwater ranged from low to medium ecological risk to the environment. Thus, the FQs in reclaimed water need to be paid more attention during their reuse for groundwater recharge, especially by direct injection. It is suggested that FQs should be considered in the priority substances lists in standards and guidelines of reclaimed water reuse for groundwater recharge to ensure the safety of groundwater.

Individual and simultaneous degradation of sulfamethoxazole and trimethoprim by ozone, ozone/hydrogen peroxide and ozone/persulfate processes: A comparative study

This study investigates the individual and simultaneous degradation and mineralization of the antibiotics, sulfamethoxazole (SMX) and trimethoprim (TMP) in aqueous solution by ozonation, ozone-activated persulfate (PS) and hydrogen peroxide (H₂O₂) processes. The trials were carried out in a semi-continuous column bubble reactor with an ozone diffuser located at the bottom of the column for a period of 2 h. Furthermore, the efficiency of studied processes were evaluated at two different initial pH and various doses of oxidants. The target compounds degradation observed pseudo-first-order rate constants (k_obs) and removal of total organic carbon (TOC) using ozone-based oxidation processes were compared. Irrespective of the applied processes, the mineralization of target compounds was less effective than their degradation in both individual and simultaneous systems. The highest antibiotics degradation rate constants were observed for individual oxidation of TMP (k_obs = 0.379 min^-1) and SMX (k_obs = 0.367 min^-1) at alkaline initial pH (pH₀) in the O₃/H₂O₂ system at an [antibiotic]/H₂O₂ molar ratio of 1/1. Irrespective of the antibiotic studied, the most effective TOC removal (~44%) was observed after a 2-h treatment with the O₃/H₂O₂ system at an [antibiotic]/H₂O₂ molar ratio of 1/5 (pH₀ 10.9). The O₃/PS system at an [antibiotic]/PS molar ratio of 1/5 (pH₀ 10.9) proved the most effective system for both mineralization and degradation (k_obs values of 0.294 min^-1 and 0.266 min^-1) of TMP and SMX, respectively, during the simultaneous oxidation of SMX-TMP. The decomposition by-products of SMX and TMP in studied ozone-based processes were identified using LC-MS analysis. The results of this study strongly suggest that using the O₃/PS process is a promising solution to reduce SMX-TMP contamination in water matrices.

Quantitative study on the fate of antibiotic emissions in China

China, the largest producer and user of antibiotics in the world, discharges excessive amounts of these substances into the environment, without prior treatment. This results in ubiquitous distribution of these substances, as well as increased levels of drug-resistant bacteria, that will eventually cause unimaginable consequences to the environment and to humans. However, most of the research on antibiotics has focused on residue analysis of single medium such as wastewater and landfills. There is paucity of research that systematically investigates the fate of antibiotics after excretion, and specifically of end-treatment processes. In this paper, the fate of antibiotic emissions is systematically calculated. The results show that human and livestock feces account for 57.6% and 42.6% of the discharge of medicinal antibiotics and veterinary antibiotics, respectively. Of these feces types, pig feces accounted for 98.7% of antibiotic residues in livestock feces. The above conclusions can be used to clarify the direction of the tracking and supervision of antibiotic residues and provide new ideas for the treatment of antibiotics, especially their terminal removal.

Removal of Drugs in Polluted Waters with Char Obtained by Pyrolysis of Hair Waste from the Tannery Process

The presence and final destination of pharmaceutical compounds in waters constitute one of the emerging events in current environmental chemistry. Two widely consumed compounds have been evaluated in this study, amoxicillin (AMOX) and diclofenac (DFC), at a concentration of 200 mg L-1. The presence of both in wastewater has been verified, generating problems in ecosystems and human health. Pyrolysis of hair waste from a tannery process was performed in a fixed-bed reactor. Char was obtained at different operating temperatures (300, 350, 400, and 450 °C), which underwent a characterization of heavy metals and elemental composition. An activation process was applied to the char obtained at 450 °C by means of physicochemical processes and with two chemical agents (KOH and K2CO3). For the removal of drugs, two separate tests were performed, one for 28 days and the other one for 4 h, to assess the efficiency and the percentage of removal. It was found that the char obtained at 450 °C is the one that removes most of both compounds: more than 90% of AMOX and more than 80% of DFC.

Occurrence, distribution, and health risk assessment of quinolone antibiotics in water, sediment, and fish species of Qingshitan reservoir, South China

The residual antibiotics in the environment have lately caused widespread concerns. However, little information is available on the antibiotic bioaccumulation and its health risk in drinking water resources of South China. Therefore, the occurrence, distribution, and health risk of four quinolone antibiotics including ofloxacin (OFX), norfloxacin (NOR), ciprofloxacin (CIP), and enrofloxacin (ENR) in the Qingshitan reservoir using high-performance liquid chromatography were investigated. Results revealed that the concentrations in water, sediment, and edible fish ranged from 3.49–660.13 ng/L, 1.03–722.18 μg/kg, and 6.73–968.66 μg/kg, respectively. The ecological risk assessment via the risk quotient (RQ) method showed that the values in sediment were all greater than 1, posing a high risk to the environment. The health risk index of water samples was at the maximum acceptable level, with OFX at the top while the rest were at the medium risk level. The main edible fish kinds of the reservoir had high dietary safety and the highest contaminations were found in carnivorous feeding habits and demersal habitat fishes with OFX as the highest magnitude. Source identification and correlation analysis using SPSS showed significant relationships between NOR with pH and turbidity (in water), as well as total phosphor (TP) and total organic carbon (TOC) in sediment. NOR was the highest in sediment which mostly sourced from livestock wastewater, croplands irrigation drain water, and stormwater. Correlations between CIP and ENR with TP were significant, while OFX was positively associated with total nitrogen (TN) which mainly originated from urban sewage as well as directly dosed drugs in fish farms. In conclusion, our results are of great significance for ensuring the safety of drinking water and aquatic products in this region.

States, Trends, and Future of Aquaponics Research

As an environmentally-friendly aquaculture and planting system, aquaponics has attracted attention in various fields, such as fisheries, agriculture, and ecology. The existing review qualitatively described the development and challenges of aquaponics but lacked data support. This study selected 513 related documents (2000–2019) in the Web of Science database (WOS) to mine and quantitatively analyze its text data. The keyword co-occurrence network shows that the current aquaponics research mainly focuses on the system components, wastewater treatment, nutrient management, and system production. Research areas reflect obvious regional characteristics. China, the United States and Europe are dedicated to the application of new technologies, the optimization of system production, and the exploration of multiple roles. At present, the aquaponics development is facing many pressures from management and market. Future research requires more in-depth research in the system construction, nutrient management, and microbial community structure to provide a theoretical basis. Moreover, the identity construction within the conceptual framework of green infrastructure is a research direction worth exploring to solve low social recognition for aquaponics.

Sulfamethoxazole sorption by cattail and switchgrass roots

Sorption to roots is one of several mechanisms by which plant-assisted attenuation of antibiotics can be achieved. The objectives of this study were to (1) evaluate the sorption of sulfamethoxazole (SMX) by cattail and switchgrass roots, (2) determine the kinetics of SMX sorption by cattail and switchgrass roots, and (3) characterize the temperature-dependency of SMX sorption. A batch sorption experiment was conducted to measure SMX sorption by roots of the two plant species using five initial antibiotic concentrations (2.5, 5, 10, 15, and 20 µg L^-1) and eight sampling times (0, 0.5, 1, 2, 4, 8, 12, and 24 h). Another batch experiment was conducted at three temperatures (5, 15, and 25 °C) to determine the effect of temperature on sorption kinetics. SMX sorption followed pseudo-second-order kinetics. The pseudo-second-order rate constant (k2) decreased with increasing temperature for both plant species. The rate constant followed the order: 5 °C = 15 °C > 25 °C for cattail and 5 °C > 15 °C = 25 °C for switchgrass. Results from this study show that switchgrass roots are more effective than cattail roots in the removal of SMX. Therefore, the use of switchgrass in systems designed for phytoremediation of contaminants might also provide an efficient removal of some antibiotics.

Anionic metal-organic framework as a unique turn-on fluorescent chemical sensor for ultra-sensitive detection of antibiotics

Herein, an anionic metal-organic framework, formulated as {[Zn₃(OH)(bmipia)(H₂O)₃]₄·[Zn(H₂O)6.5]₂}_n (FCS-3), was prepared from zinc ions and semi-rigid carboxylate ligands of 5-[N,N-bis(5-methylisophthalic acid)amion] isophthalic acid (H₆bmipia) and was employed as a unique fluorescence turn-on chemical sensor for the ultra-sensitive detection of various antibiotics in the aqueous phase.

Occurrence of Antibiotics in Influent and Effluent from 3 Major Wastewater-Treatment Plants in Finland

Wastewater-treatment plants (WWTPs) are regarded as one of the main sources of antibiotics in the environment. In the present study, the concentrations of multiple antibiotics and their metabolites belonging to 5 antibiotic classes were determined in 3 major Finnish WWTPs. An online solid phase extraction-liquid chromatography-tandem mass spectrometry method was used for the extraction and analysis of the compounds. The method was fully validated using real and synthetic wastewaters. Seven antibiotics and 3 metabolites were found in the analyzed samples. Sulfonamides were removed most efficiently, whereas macrolides usually showed negative removal efficiency during the treatment, which means that the concentrations for individual antibiotics determined in the effluent samples were higher than in the influent samples. Sulfadiazine was found at concentrations up to 1018 ng/L, which was the highest concentration of any of the detected antibiotics in influent. In the effluent samples, the highest mean concentration was found for trimethoprim (532 ng/L). The measured mass loads of the antibiotics and metabolites to the receiving waters ranged from 2 to 157 mg/d per 1000 population equivalent. The evaluated environmental risk assessment showed that clarithromycin and erythromycin might pose a risk to the environment. The present study further underlines the importance of implementing technology for efficient removal of xenobiotics during wastewater treatment. Environ Toxicol Chem 2020;39:1774-1789. © 2020 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Ozonation of diclofenac in the aqueous solution: Mechanism, kinetics and ecotoxicity assessment

The pharmaceutical and personal care products (PPCPs) in aquatic environment have aroused more interest recently. Many of them are hard to degrade by the typical biological treatments. Diclofenac (DCF), as a significant anti-inflammatory drug, is a typical PPCP and widely existed in water environment. It is reported that DCF has adverse effects on aquatic organisms. This work aims to investigate the mechanism, kinetics and ecotoxicity assessment of DCF transformation initiated by O₃ in aqueous solution, and provide a solution to the degradation of DCF. The O₃-initiated oxidative degradations of DCF were performed by quantum chemical calculations, including thirteen primary reaction pathways and subsequent reactions of the Criegee intermediates with H₂O, NO and O₃. Based on the thermodynamic data, the kinetic parameters were calculated by the transition state theory (TST). The total reaction rate constant of DCF initiated by O₃ is 2.57 × 10³ M^-1 s^-1 at 298 K and 1 atm. The results show that the reaction rate constants have a good correlation with temperature. The acute and chronic toxicities of DCF and its degradation products were evaluated at three different trophic levels by the ECOSAR program. Most products are converted into less toxic or harmless products. Oxalaldehyde (P3) and N-(2,6-dichlorophenyl)-2-oxoacetamide (P6) are still harmful to the three aquatic organisms, which should be paid more attention in the future.

The incidence of antibiotic resistance within and beyond the agricultural ecosystem: A concern for public health

The agricultural ecosystem creates a platform for the development and dissemination of antimicrobial resistance, which is promoted by the indiscriminate use of antibiotics in the veterinary, agricultural, and medical sectors. This results in the selective pressure for the intrinsic and extrinsic development of the antimicrobial resistance phenomenon, especially within the aquaculture‐animal‐manure‐soil‐water‐plant nexus. The existence of antimicrobial resistance in the environment has been well documented in the literature. However, the possible transmission routes of antimicrobial agents, their resistance genes, and naturally selected antibiotic‐resistant bacteria within and between the various niches of the agricultural environment and humans remain poorly understood. This study, therefore, outlines an overview of the discovery and development of commonly used antibiotics; the timeline of resistance development; transmission routes of antimicrobial resistance in the agro‐ecosystem; detection methods of environmental antimicrobial resistance determinants; factors involved in the evolution and transmission of antibiotic resistance in the environment and the agro‐ecosystem; and possible ways to curtail the menace of antimicrobial resistance.

First report of pharmaceuticals and personal care products in two tropical rivers of southwestern India

The occurrence of selected pharmaceuticals (trimethoprim, sulfamethoxazole, chloramphenicol, bezafibrate, ceftriaxone, and naproxen) in two west-flowing tropical rivers (Swarna and Nethravati) of southwestern India is reported for the first time. Water samples were collected during the monsoon and post-monsoon seasons from river water end members and further downstream up to their confluence with the adjacent Arabian Sea. Samples were analyzed using HPLC-MS/MS. Results revealed that there were no significant seasonal variations in concentrations of target analytes in both the rivers. Of the total number of samples analyzed (n = 24), trimethoprim was detected in 100% of the samples, whereas sulfamethoxazole (SMX), chloramphenicol (CAP), ceftriaxone (CTX), and naproxen (NPX) were detected in between 91 and 58% of the samples. Bezafibrate (BZF) was not detected in the samples. Nethravathi river showed higher concentrations of pharmaceuticals than the Swarna river which may be attributed to comparatively larger human population in the basin. Possible impacts of PPCPs on aquatic life offer further scope for study.

Detection of New Delhi Metallo-β-lactamase 1 and Cephalosporin Resistance Genes Among Carbapenem-Resistant Enterobacteriaceae in Water Bodies Adjacent to Hospitals in India

The prevalence of carbapenem resistance among bacterial isolates from selected water bodies receiving hospital effluents and adjoining aquaculture farms in Kerala, India, was studied. Klebsiella pneumoniae followed by Escherichia coli, Klebsiella oxytoca, Enterobacter aerogenes and Acinetobacter baumannii were the predominant isolates. Antibiotic sensitivity of these isolates was determined by Kirby-Bauer disc diffusion method. Nearly 60% of the Enterobacteriaceae isolates screened were multidrug resistant of which 16.6% were carbapenem resistant. The carbapenem-resistant Enterobacteriaceae were further screened for the presence of New Delhi metallo β-lactamase-1 and cephalosporin resistance encoding genes. All NDM-1 isolates were highly resistant to carbapenem, cephalosporin, aminoglycosides, quinolones, tetracycline, and sulphonamides. K. pneumoniae harboring bla_NDM-1 gene and E. coli isolates with bla_CTX-M-15 and bla_SHV-11 genes were detected in hospital discharge points. In aquaculture farms too, carbapenem-resistant K. pneumoniae with bla_NDM-1 gene and E. coli isolates with bla_CTX-M-15 were observed, although there was no use of antibiotics in these farms. However, other carbapenemase genes such as bla_TEM, bla_VIM, bla_IMP and bla_GIM were not detected in any of these isolates. The results suggest the increased prevalence of carbapenem-resistant Enterobacteriaceae in the water bodies receiving hospital effluent and its dissemination to adjacent aquaculture farms, posing a serious threat to public health.

Simultaneous determination of multi-class antibiotics and steroid hormones drugs in livestock and poultry faeces using liquid chromatography-quadrupole time-of-flight mass spectrometry

A method for simultaneous determination of multi-class antibiotics and steroid hormone analysis in faeces of livestock and poultry was developed using liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-QTOF MS). An in-house database was built for 156 detected drugs using Personal Compound Database Library software (PCDL) including compound name, monoisotopic mass, chemical formula, RT, chemical structure and three CID MS/MS spectra. The linearity result showed that all the drugs exhibited good linearity with determination coefficients (R²) higher than 0.99. The drug recoveries and their RSDs for all three faeces samples (pig, cattle and chicken) were tested and 81, 96 and 92 drugs were chosen for analysis in pig, cattle and chicken faeces, respectively. Further validation showed that 73 veterinary drugs in all three kinds of faeces samples can be quantified in one analytical run. This work shows that qualitative and quantitative analysis using LC-QTOF MS represents a simple, sensitive, low-cost and high-throughput methodology in routine laboratory analyses.

Occurrence and toxicity of antibiotics in the aquatic environment: A review

In recent years, antibiotics have been used for human and animal disease treatment, growth promotion, and prophylaxis, and their consumption is rising worldwide. Antibiotics are often not fully metabolized by the body and are released into the aquatic environment, where they may have negative effects on the non-target species. This review examines the recent researches on eight representative antibiotics (erythromycin, trimethoprim, sulfamethoxazole, tetracycline, oxytetracycline, ofloxacin, ciprofloxacin, and amoxicillin). A detailed overview of their concentrations in surface waters, groundwater, and effluents is provided, supported by recent global human consumption and veterinary use data. Furthermore, we review the ecotoxicity of these antibiotics towards different groups of organisms, and assessment of the environmental risks to aquatic organisms. This review discusses and compares the suitability of currently used ecotoxicological bioassays, and identifies the knowledge gaps and future challenges. The risk data indicate that selected antibiotics may pose a threat to aquatic environments. Cyanobacteria were the most sensitive organisms when using standard ecotoxicological bioassays. Further studies on their chronic effects to aquatic organisms and the toxicity of antibiotic mixtures are necessary to fully understand the hazards these antibiotics present.

Removal of sulfadiazine and ciprofloxacin by clays and manganese oxides: Coupled sorption-oxidation kinetic model

Sorption onto clays (montmorillonite and kaolinite), oxidation and sorption by manganese oxides (synthesized MnO and natural MnO), and coupled sorption-oxidation experiments were conducted for the removal of antibiotics sulfadiazine (SDZ) and ciprofloxacin (CIP) at pH 5 and 8. Individual sorption and oxidation modelling were carried out using the first-order kinetic model. A coupled sorption-oxidation kinetic model was developed to predict the simultaneous sorption and oxidation process. The coupled sorption-oxidation enhanced the antibiotic sorption, with the first-order sorption rate constants in the simultaneous presence of clays and manganese oxides (k_sorp) being higher than those with clays only (k_sorp⁰). In contrast, a depression was observed; the first-order oxidation and sorption combination rate constants in the simultaneous presence of manganese oxides and clays (k_MnO) were lower than those with manganese oxides only (k_MnO⁰). In the coupled sorption-oxidation reaction, 13.5-62.5% of SDZ and CIP removal was attributed to the sorption. The SDZ and CIP species distributions at pH 5 affected the coupled sorption and oxidation systems more than those at pH 8. The best removal efficiency was achieved by the montmorillonite-synthesized MnO combination, mainly due to the higher surface area (A_BET) and pore size of montmorillonite and synthesized MnO combination compared to other clays and manganese oxides combinations.

Biosorption of dicloxacillin from pharmaceutical waste water using tannin from Indian almond leaf: Kinetic and equilibrium studies

•

The maximum adsorption capacity was 86.93 %.

•

Experimental data were in agreement with pseudo-second-order kinetics.

•

Experimental data were followed Langmuir isotherm model.

•

Biosorption of dicloxacilin onto T. catappa L. biomass is possible, spontaneous and exothermic process.

This study focused on the use of Indian almond leaf biomass, a local plant widely found in Thailand, on removal of dicloxacillin from pharmaceutical waste water by biosorption. The biosorption characteristics of dicloxacillin were investigated in terms of equilibrium, kinetics and thermodynamics. Optimum biosorption conditions were determined from pH, initial dicloxacillin concentration, biomass dosage, contact time, and temperature. The maximum adsorption capacity was 86.93 % (pH 6.0, 0.1 g/L biomass, dicloxacillin concentration 20 mg/L, contact time 24 h, temperature 283.15 K). The thermodynamic parameters (298.15 K), free energy change, enthalpy change and entropy change were -3475.79 J/mol, −25.36 kJ/mol, and −73.40 J/mol/K, respectively. The best interpretation for the experimental data was given by the Langmuir isotherm with correlation coefficient of 0.965. The results were found to tie in well with pseudo-second-order kinetics. Considering the cost-effectiveness, Indian almond leaf biomass is considered to be suitable to remove dicloxacillin from pharmaceutical waste water.

Challenges of municipal wastewater reclamation for irrigation by MBR and NF/RO: Physico-chemical and microbiological parameters, and emerging contaminants

Climate change and the increased demand for food amplified the global problem with water supply for irrigation. This work deals with the reclamation of municipal wastewater (MWW) for irrigation by a membrane bioreactor (MBR), nanofiltration (NF), and reverse osmosis (RO). The emphasis was on the comparison of physico-chemical and microbiological parameters with the World Health Organization (WHO) and the European Union (EU) guidelines. In addition, the detection and removal of contaminants of emerging concern (CEC) from the Watch List (EU Decision 2015/495) were examined. Firstly, the MWW was monitored (physico-chemical and microbiological parameters, trace elements, and occurrence of CECs) for six months. Thereafter, the MWW was treated with MBR, NF, and RO. The reclaimed water satisfied the physico-chemical and microbiological quality requirements only after additional NF/RO treatment. Membrane bioreactor efficiently removed methiocarb (>99.9%), tri-allate (>99.9%), clothianidin (88.0%), and clarithromycin (71.9-74.2%), while the removal of azithromycin, acetamiprid, and oxadiazon was around 30%. The low and even negative removal during MBR treatment was observed for diclofenac (15%), clothianidin (-14%), imidacloprid (-18%), and diclofenac (-157%). Additional treatment of MBR effluent with NF90 and XLE membranes resulted in complete rejection of detected CECs, while NF270 membrane achieved results between 75% and 91%.

UV photolysis as an efficient pretreatment method for antibiotics decomposition and their antibacterial activity elimination

The biological treatment of antibiotic-containing wastewater is a mainstream process, but the antibacterial activity from the persistence of antibiotics would inhibit the biological activity and function of wastewater treatment plants and lead to the risk of transmission of antibiotic resistant bacteria and genes. In this study, UV photolysis was selected as an appropriate pretreatment technology for antibiotic-containing wastewater. It could decompose many kinds of antibiotics and was not inhibited by the coexisting organics in wastewater. The antibacterial activities of five kinds of antibiotics, which were eliminated with UV irradiation, exhibited a significantly positive correlation with their parent compound concentrations. The photodecomposition of the main functional groups in antibiotics contributed to the elimination of antibacterial activity. Defluorination was the main pathway to eliminate the antibacterial activity of antibiotics containing a fluorine substituent (e.g., florfenicol and ofloxacin), while the photoinduced opening of the β-lactam ring was the most efficient route to eliminate the antibacterial activity of β-lactam antibiotics (e.g. cefalexin, amoxicillin and ampicillin). These results demonstrated that UV photolysis could be adopted as an efficient and promising pretreatment strategy for the source control of antibiotic antibacterial activity by the decomposition of antibiotic functional groups before the biological treatment unit.

Norfloxacin-induced effect on enhanced biological phosphorus removal from wastewater after long-term exposure

In this study, long-term experiments were performed under synthetic wastewater conditions to evaluated the potential impacts of norfloxacin (NOR) (10, 100 and 500 μg/L) on enhanced biological phosphorus removal (EBPR). Experimental result showed that long-term exposure to 10 μg/L NOR induced negligible effects on phosphorus removal. The presence of 100 μg/L NOR slightly decreased phosphorus removal efficiency to 94.41 ± 1.59 %. However, when NOR level further increased to 500 μg/L, phosphorus removal efficiency was significantly decreased from 97.96 ± 0.8 5% (control) to 82.33 ± 3.07 %. The mechanism study revealed that the presence of 500 μg/L NOR inhibited anaerobic phosphorus release and acetate uptake as well as aerobic phosphorus uptake during long-term exposure. It was also found that 500 μg/L NOR exposure suppressed the activity of key enzymes related to phosphorus removal but promoted the transformations of intracellular polyhydroxyalkanoate and glycogen. Microbial analysis revealed that that the presence of 500 μg/L NOR reduced the abundances of polyphosphate accumulating organisms but increased glycogen accumulating organisms, as compared the control.

Detection of Pharmaceutical Residues in Surface Waters of the Eastern Cape Province

Pharmaceuticals are emerging contaminants in the aquatic environments. Their presence poses toxicological effects in humans and animals even at trace concentrations. This study investigated the presence of antibiotics, anti-epilepsy and anti-inflammatory drugs in river water of selected rivers in the Eastern Cape Province in South Africa. Enzyme-linked immunosorbent assay was used for screening of sulfamethoxazole and fluoroquinolones antibiotics. The samples were collected in upper-stream, middle-stream and lower-stream regions of the rivers and effluent of selected wastewater treatment plants. Pre-concentration of the samples was conducted using lyophilisation and extraction was conducted using solid phase extraction (SPE) on Waters Oasis hydrophilic-lipophilic-balanced cartridge. The percentage recovery after sample clean-up on SPE was 103% ± 6.9%. This was followed by ultra-performance liquid chromatography electrospray ionization tandem mass spectrometry. The detected analytes were sulfamethoxazole, erythromycin, clarithromycin and carbamazepine. Carbamazepine and erythromycin were detected in high concentrations ranging from 81.8 to 36,576.2 ng/L and 11.2 to 11,800 ng/L respectively, while clarithromycin and sulfamethoxazole were detected at moderate concentrations ranging from 4.8 to 3280.4 ng/L and 6.6 to 6968 ng/L, respectively. High concentrations of pharmaceuticals were detected on the lower-stream sites as compared to upper-stream sites.

Efficient multiresidue determination method for 168 pharmaceuticals and metabolites: Optimization and application to raw wastewater, wastewater effluent, and surface water in Beijing, China

New analytical methods are needed to efficiently measure the growing list of priority pharmaceuticals in environmental samples. In this regard, a rapid, sensitive, and robust method was developed for quantitation of 168 pharmaceuticals and pharmaceutical metabolites using solid-phase extraction (SPE) and liquid chromatography with tandem mass spectrometry. The extraction protocol and instrumental efficiency were specifically addressed to increase analytical workload and throughput. The optimized protocols, which are five times more efficient than US EPA Method 1694, enabled analyte recoveries that ranged from 77% to 117% for 162 analytes with method quantitation limits (MQLs) as low as 0.1 ng L^-1. To verify the suitability of the improved analytical method for environmental samples, 24-h composite samples of raw wastewater and wastewater effluent, along with downstream surface water, were analyzed. Overall, 143/168 target compounds were identified in at least one of the samples, and 130/168 analytes were present at concentrations above their MQLs. The total mass concentration of the measured analytes decreased by 93% during wastewater treatment. The analyte concentrations in the wastewater effluent were comparable to those measured in surface water 1 km downstream of the wastewater discharge point. Ultimately, the comprehensive method will serve as an important tool to inform the occurrence, fate, transport, and toxicity of a large suite of priority pharmaceuticals and pharmaceutical metabolites in natural and engineered systems.

Evolving high-throughput approaches to assess the environmental risk of sewage water at molecular level: comprehensive study

Dissolved organic matter (DOM) especially anthropogenic compounds in sewage systems affects their ultimate fate in the environment which is challenging to ascertain the heterogenic nature of the compound and causes co-occurring effects in most aquatic samples. So, our study have focused on current approaches to the chemical and structural characterization of DOM with the detailed classification of individual compounds such as the molecular levels of volatile organic, inorganic materials, drugs and endocrine disrupting compounds. Analytical techniques for example high performance gas chromatography-mass spectrometry (GCMS) with high-resolution liquid chromatography (HR-LCMS), X-ray diffraction (XRD) and three-dimensional fluorescence excitation emission matrix (3D-EEM) has resulted in advancing the parametric studies. In addition, the toxicological assessment of an aquatic organism (zebrafish as a model) has ensued in enlightening the risk of contaminated sources. The result of the research highlighted the efficacy of high-throughput approaches to assess the environmental impact of sewage water.

Efficient detection and assessment of human exposure to trace antibiotic residues in drinking water

Human exposure to antibiotic residues in drinking water has not been well evaluated. This study is the first attempt to simultaneously and efficiently identify and quantify 92 antibiotic residues in filtered tap water (multistage filtration at the tap) (n = 36) collected from 10 areas of a large city in southern China, 10 Chinese brands of bottled/barreled water (n = 30) and six foreign brands of bottled water (n = 18) obtained from the Chinese market. The average and median concentrations of all the detected antibiotic compounds was 182 and 92 ng/L in filtered tap water, 180 and 105 ng/L in Chinese brands of bottled/barreled water, and 666 and 146 ng/L in foreign brands of bottled water, respectively. A total of 58 antibiotics were detected in the filtered tap water, and 45 and 36 antibiotics were detected in the Chinese and foreign brands of bottled water, respectively. More types of antibiotics were detected in Chinese brands of bottled water than in the other bottled waters. In addition, Chinese waters had high roxithromycin concentrations, while the foreign brands of bottled water had high concentrations of dicloxacillin. The average and median values of the estimated overall daily intake of all the detected antibiotics were 4.3 and 2.3 ng/kg/day when only filtered tap water was drunk, 4.0 and 2.5 ng/kg/day when Chinese brands of bottled water was drunk, and 16.0 and 4.9 ng/kg/day when foreign brands of bottled water was drunk. Further study is needed to develop a more comprehensive estimation of human exposure to antibiotic residues in the environment and a more in-depth understanding of the potential hazard of ingested antibiotic residues to the human microbiome.

Sulfamethoxazole/Trimethoprim ratio as a new marker in raw wastewaters: A critical review

Global Trimethoprim (TMP) and Sulfamethoxazole (SMX) occurrences in raw wastewaters were systematically collected from the literature (n = 140 articles) in order to assess the relevance of using the SMX/TMP ratio as a marker of the main origin of wastewaters. These two antibiotics were selected due to their frequent use in association (i.e. co-trimoxazole) in a 5:1 ratio (SMX:TMP) for medication purposes, generating a unique opportunity to globally evaluate the validity of this ratio based on concentration values. Several parameters (e.g. sorption, biodegradation) may affect the theoretical SMX/TMP ratio. However, the collected data highlighted the good agreement between the theoretical ratio and the experimental one, especially in wastewater treatment plant influents and hospital effluents. Only livestock effluents displayed a very high SMX/TMP ratio, indicative of the very significant use of sulfonamide alone in this industry. Conversely, several countries displayed low SMX/TMP ratio values, highlighting local features in the human pharmacopoeia. This review provides new insights in order to develop an easy to handle and sound marker of wastewater origins (i.e. human/livestock), beyond atypical local customs.

The grey water footprint of human and veterinary pharmaceuticals

Water pollution by pharmaceuticals is widespread, causing both environmental and human health risks. We assess pharmaceutical water pollution from human and veterinary pharmaceuticals at three geographical levels: global, national (considering Germany and the Netherlands) and catchment level (with a case study for the Vecht catchment shared by Germany and the Netherlands). The grey water footprint (GWF), a measure of water pollution in volumetric terms, is estimated from pharmaceutical loads entering the aquatic environment, considering different pollutant sources and pathways. We study different substances depending on data availability, which varies across geographical levels. Results show a global per capita GWF of 1900 m³ yr^-1 resulting from human consumption of ciprofloxacin. The largest GWFs in both Germany and the Netherlands were found for ethinylestradiol for human and amoxicillin for veterinary use. The estimated per capita GWF from human use of ethinylestradiol is 2300 m³ yr^-1 for Germany and 11,300 m³ yr^-1 for the Netherlands. The per capita GWFs of German and Dutch consumers of animal products are 12,900 and 10,600 m³ yr^-1, respectively. For the Vecht catchment, we estimate the water pollution level per sub-catchment by comparing the GWF to available runoff, which enables us to identify geographic hotspots. In the basin as a whole, GWFs from human and veterinary pharmaceuticals both exceed available runoff. At all levels, pharmaceutical water pollution substantially adds to earlier water footprint studies that excluded this type of pollution, which demonstrates the importance to include pharmaceutics in water footprint studies.

Characteristics of toxin production and release in Microcystis aeruginosa exposed to three tetracycline antibiotics

The application of antibiotics is remarkable globally. However, antibiotic residues in aquatic ecosystems can pose adverse effects on nontarget plants and animals. In the present study, the cell growth properties and the production and release of microcystin-LR and microcystin-RR in cyanobacterium Microcystis aeruginosa after exposure to three typical antibiotics were investigated. Results showed that the order of the degree of chronic toxicities of the three chemicals was oxytetracycline hydrochloride (OTC) > tetracycline hydrochloride (TC) > chlortetracycline hydrochloride (CTC). The target antibiotics interfered with the production and release of the toxins microcystin-LR and microcystin-RR to varying degrees. TC simultaneously increased MC-LR intracellular and extracellular concentrations and interfered with MC-RR intracellular and extracellular concentrations to varying degrees. CTC reduced MC-LR intracellular concentrations and simultaneously reduced the MC-RR intracellular and extracellular concentrations. OTC increased the MC-LR intracellular and extracellular concentrations but did not have an effect on MC-RR concentrations. The extracellular MC-LR concentrations increased dramatically from day 24 to 27 when the cells were saturated, while most MC-RRs stayed within the cells. MC-LR can easily enter the surrounding water body and pose a threat when the water blooms occurred. Our results may help illustrate the influence of tetracycline antibiotics on the production and release of toxin in M. aeruginosa. It is important for environmental protection and evaluation. The results may as well guide the use of antibiotics in agricultural settings.

Antibiotics: A Bibliometric Analysis of Top 100 Classics

Citation frequencies represent the most significant contributions in any respective field. This bibliometric analysis aimed to identify and analyze the 100 most-cited publications in the field of antibiotics and to highlight the trends of research in this field. “All databases” of Clarivate Analytics’ Web of Science was used to identify and analyze the 100 publications. The articles were then cross-matched with Scopus and Google Scholar. The frequency of citation ranged from 940 to 11,051 for the Web of Science, 1053 to 10,740 for Scopus, and 1162 to 20,041 for Google Scholar. A total of 513 authors made contributions to the ranked list, and Robert E.W. Hancock contributed in six articles, which made it to the ranked list. Sixty-six scientific contributions originated from the United States of America. Five publications were linked to the University of Manitoba, Canada, that was identified as the educational organization, made the most contributions (n = 5). According to the methodological design, 26 of the most cited works were review-type closely followed by 23 expert opinions/perspectives. Eight articles were published in Nature journal, making it the journal with the most scientific contribution in this field. Correlation analysis between the publication age and citation frequency was found statistically significant (p = 0.012).

Effective Removal of Levofloxacin from Pharmaceutical Wastewater Using Synthesized Zinc Oxid, Graphen Oxid Nanoparticles Compared with their Combination

The presence of antibiotic traces in the aquatic system due to the inefficient treatment of the pharmaceutical wastewater represented threats, such as bioaccumulation and antibiotic-resistance, to the environment and human health. Accordingly, for the first time, the current work utilized the photocatalytic degradation and the adsorption approach for Levofloxacin (LEVO) in pharmaceutical wastewater using new designed nano aspects. Therefore, spherical Zinc oxide nanoparticles (ZnONP) sized 17 nm and ultrathin sheet-like structure graphene oxide nanosheets (GONS) with layer thickness ~5 nm were fabricated separately or in a combination between them then characterized via Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), Fourier Transforms Infrared Spectroscopy (FTIR), absorption spectra (UV-Vis) and Brunauer-Emmett-Teller (BET). Additionally, several parameters were investigated to evaluate the potential of the removal process, such as pH, the exposure time to UV radiation, the type and concentration of the nanoparticles (NPs) and the initial concentration of the drug using a mixed fractional factorial design. The most effective parameter for LEVO removal was the NPs type followed by the initial drug concentration. Furthermore, an RP-HPLC/UV method was developed and validated for measuring the percentage of removal for LEVO drug. The highest percentage removal for both 50 and 400 µg mL⁻¹ LEVO was 99.2% and 99.6%, respectively, which was achieved using ZnONP/GONS combination at pH 9 ± 0.05 and UV light exposure time 120 min. In addition, the negative antibacterial activity of the treated wastewater sample confirmed the drug removal. The established protocol was successfully applied on wastewater samples collected from a pharmaceutical company that encouraged researchers to mainstream this design to be applied on other pharmaceutical wastewater drugs.

Magnetic nanoparticles assisted dispersive liquid-liquid microextraction of chloramphenicol in water samples

This work describes the development of a new methodology based on magnetic nanoparticles assisted dispersive liquid-liquid microextraction (DLLME-MNPs) for preconcentration and extraction of chloramphenicol (CAP) antibiotic residues in water. The approach is based on the use of decanoic acid as the extraction solvent followed by the application of MNPs to magnetically retrieve the extraction solvent containing the extracted CAP. The coated MNPs were then desorbed with methanol, and the clean extract was analysed using ultraviolet-visible spectrophotometry. Several important parameters, such as the amount of decanoic acid, extraction time, stirring rate, amount of MNPs, type of desorption solvent, salt addition and sample pH, were evaluated and optimized. Optimum parameters were as follows: amount of decanoic acid: 200 mg; extraction time: 10 min; stirring rate: 800 rpm; amount of MNPs: 60 mg; desorption solvent: methanol; salt: 10%; and sample pH, 8. Under the optimum conditions, the method demonstrated acceptable linearity (R ² = 0.9933) over a concentration range of 50-1000 µg l^-1. Limit of detection and limit of quantification were 16.5 and 50.0 µg l^-1, respectively. Good analyte recovery (91-92.7%) and acceptable precision with good relative standard deviations (0.45-6.29%, n = 3) were obtained. The method was successfully applied to tap water and lake water samples. The proposed method is rapid, simple, reliable and environmentally friendly for the detection of CAP.

Mechanistic and ecotoxicological studies of amoxicillin removal through anaerobic degradation systems

Many studies have been conducted on the evaluation and monitoring of micropollutants and by-products in wastewater treatment plants. Considering the increase in the production and consumption of emerging contaminants, such as drugs, personal care products, and plasticisers, it is necessary to conduct studies that support the elaboration of laws and regulations that promote the environmentally sustainable use of sludge and effluents. In this work, the biological degradation of amoxicillin was studied under two anaerobic conditions: i) using a 6 L reactor operated under semi-continuous flow; and ii) a batch system with 100 mL sealed glass syringes. According to the statistical analysis, amoxicillin was completely removed from the systems, but biogas production inhibition was observed (p < 0.05). Liquid chromatography-high-resolution mass spectrometry analysis identified amoxicillin penicilloic acid, amoxilloic acid, amoxicillin diketopiperazine and phenol hydroxypyrazine as by-products under anaerobic conditions. Ecotoxicity tests on effluent treated under the batch conditions showed that the addition of higher amounts of amoxicillin inhibited the target species Aliivibrio fischeri and Raphidocelis subcaptata, causing functional decreases of 28.5% and 22.2% when the antibiotic concentration was 2500 μg L^-1. A. fischeri was the most sensitive organism to effluent treated under semi-continuous flow conditions; a continuous reduction in bioluminescence of up to 88.8% was observed after 39 days of feeding, which was associated with by-products accumulation due to unbalanced conditions during anaerobic digestion. Changes in the physico-chemical characteristics of the effluent caused the accumulation and removal of AMX-DKP IV and modified the toxicity to Lactuca sativa and R. subcapitata.

Enrichment of endophytic Actinobacteria in roots and rhizomes of Miscanthus × giganteus plants exposed to diclofenac and sulfamethoxazole

This study investigates how wastewater containing 2 mg l^-1 of sulfamethoxazole (SMX) and 2 mg l^-1 of diclofenac (DCF) affects the composition of bacterial communities present in the roots and rhizomes of Miscanthus × giganteus plants grown in laboratory-scale constructed wetlands. Bacterial communities in plant roots and rhizomes were identified in treated and control samples by 16S rRNA amplicon sequencing. Moreover, bacterial endophytes were isolated in R2A and 1/10 869 media and screened for their ability to metabolize SMX and DCF in liquid medium by HPLC. Our results show significant changes in the abundance of main genera, namely Sphingobium and Streptomyces between control and treated plants. Around 70% of the strains isolated from exposed plants belonged to the phylum Actinobacteria and were classified as Streptomyces, Microbacterium, and Glycomyces. In non-exposed plants, Proteobacteria represented 43.5% to 63.6% of the total. We identified 17 strains able to remove SMX and DCF in vitro. From those, 76% were isolated from exposed plants. Classified mainly as Streptomyces, they showed the highest SMX (33%) and DCF (41%) removal efficiency. These isolates, alone or in combination, might be used as bio-inoculants in constructed wetlands to enhance the phytoremediation of SMX and DCF during wastewater treatment.

Selectively enrichment of antibiotics and ARGs by microplastics in river, estuary and marine waters

The partition of antibiotics and antibiotic resistant genes (ARGs) between the microplastics (MPs) and the surrounding water with various salinity are still unclear. In this study, we hypothesized that adsorption of antibiotics on MPs might cause a significant change of the structure of microbial communities, diversity and abundance of ARGs on MPs and this might be further affected by change of salinity. In this study, we investigated adsorption of four common antibiotics (sulfamerazine, tetracycline, chloramphenicol and tylosin) to polyethylene (PE) MPs in river, estuary and marine waters, and the differences of antibiotic resistant genes (ARGs) and bacterial communities on MPs and in the three waters. The results showed that MPs can enrich antibiotics, ARGs and microbes from the surrounding water. Elevated salinity could reduce adsorption of antibiotics to MPs and the abundance of ARGs. For example, MPs can concentrate more antibiotics and ARGs in the fresh river water than in the estuary and the marine waters. In addition, ARGs and bacterial communities on MPs at various salinity were significantly different under the pressure of four antibiotics. On MPs, sul1, sulA/folP-01, tetA, tetC, tetX and ermE increased significantly but a few new ARGs such as sulA/folP-01 and tetA appeared. The structure of the bacterial communities on MPs was different from the surrounding water since some bacteria species found on MPs were barely detected in the surrounding water while some genera on MPs vanished after exposure to antibiotics. As the antibiotics adsorbed and the ARGs on MPs decreased with the water salinity, the structure of the communities on MPs thus varied with salinity change. These findings are important to understand the effects of MPs on the transport, fate and ecological risk of antibiotics and ARGs in different aquatic environments.

Pharmaceuticals residues and xenobiotics contaminants: Occurrence, analytical techniques and sustainable alternatives for wastewater treatment

Emerging contaminants are increasingly present in the environment, and their appearance on both the environment and health of living beings are still poorly understood by society. Conventional sewage treatment facilities that are under validity and were designed years ago are not developed to remove pharmaceutical compounds, their main focus is organic and bacteriological removal. Pharmaceutical residues are associated directly with quantitative production aspects as well as inadequate waste management policies. Persistent classes of emerging compounds such as xenobiotics present molecules whose physicochemical properties such as small molecular size, ionizability, water solubility, lipophilicity, polarity and volatility make degradability, identification and quantification of these complex compounds difficult. Based on research results showing that there is a possibility of risk to human and environmental health the presence of these compounds in the environment this article aimed to review the main pharmaceutical and xenobiotic residues present in the environment, as well as to present the most common methodologies used. The most commonly used analytical methods for identifying these compounds were HPLC and Gas Chromatography coupled with mass spectrometry with potential for characterize complex substances in the environment with low concentrations. An alternative and low-cost technology for emerging compound treatment demonstrated in the literature with a satisfactory performance for several types of sewage such as domestic sewage, wastewater and agroindustrial, was the Wetlands Constructed. The study was able to identify the main compounds that are being found in the environment and identify the most used analytical methods to identify and quantify these compounds, bringing some alternatives combining technologies for the treatment of compounds. Environmental contamination is eminent, since the production of emerging compounds aims to increase along with technological development. This demonstrates the need to explore and aggregate sewage treatment technologies to reduce or prevent the deposition of these compounds into the environment.

Ultrafast photodegradation of isoxazole and isothiazolinones by UV254 and UV254/H2O2 photolysis in a microcapillary reactor

The photodegradation process of methylisothiazolinone (MIT), benzisothiazolinone (BIT), and isoxazole (ISOX) in ultrapure water and synthetic wastewater by means of UV₂₅₄ photolysis and by UV₂₅₄/H₂O₂ advanced oxidation process were investigated in a microcapillary photoreactor designed for ultrafast photochemical transformation of microcontaminants. For the first time, we estimated key photo-kinetic parameters, i.e. quantum yields (35.4 mmol·ein^-1 for MIT, and 13.5 and 55.8 mmol·ein^-1 for BIT at pH = 4-6 and 8, respectively) and rate constants of the reaction of photo-generated OH radicals with MIT and BIT (2.09·10⁹ and 5.9·10⁹ L mol^-1·s^-1 for MIT and BIT). The rate constants of the reaction of photo-generated OH radicals with ISOX in MilliQ water was also estimated (2.15·10⁹ L mol^-1·s^-1) and it was in good agreement with literature indications obtained in different aqueous matrices. The models were extended and validated to the case of simultaneous degradation of mixtures of these compounds and using synthetic wastewater as an aqueous matrix. High resolution-accurate mass spectrometry analysis enabled identification of the main intermediates (BIT200, B200, saccharin, BIT166) and enabled proposal of a novel degradation pathway for BIT under UV₂₅₄/H₂O₂ treatment. This study demonstrates an ultrafast method to determine key photo-kinetic parameters of contaminants of emerging concern in water and wastewater, which are needed for design and validation of photochemical water treatment processes of municipal and industrial wastewaters.

Highly enhanced adsorption performance of tetracycline antibiotics on KOH-activated biochar derived from reed plants

Organic pollutants in water are an increasingly prominent problem. Given this challenge, this study investigated the high adsorption capacity of reed-based biochar for use as an adsorbent using the potassium hydroxide (KOH) activation method. We investigated the performance and mechanism of reed-based biochar with respect to the adsorption of a significant contaminant of emerging concern, tetracycline (TC). The effects of pH, contact time, temperature, and initial pollution concentration on the adsorption rate were investigated in detail. The experimental results suggest that the internal structure of activated biochar was loose and porous, and the specific surface area (BET) increased by 194.08 times, reaching 965.31 m2 g-1 after KOH activation. The biochar surface was electronegative, due to the ionization of oxygen-containing functional groups, such as hydroxyl (-OH) and carboxyl (-COOH) groups. Solution pH had only a weak influence on TC adsorption; neutral conditions favored adsorption. The adsorption kinetics and isotherms were represented well by the pseudo-second-order and Freundlich models, respectively. The chemical multilayer adsorption may play an important role in TC adsorption, which was a spontaneous endothermic reaction. The adsorption process occurred more easily after KOH activation and the adsorption capacity of biochar improved by more than 20 times. These results indicate that preparing reed-derived biochar using KOH activation is an effective way to reduce pollution and utilize a waste resource.

Expired Medication: Societal, Regulatory and Ethical Aspects of a Wasted Opportunity

A massive volume of expired medications amasses annually around the world because of pharmaceutical overprescription, combined with overproduction. The accumulation of pharmaceutical waste imposes ecological, economic and social/ethical burdens. Managing this presumed “waste” has developed into a global challenge due to the absence of specific regulations, unreasonable behavior of the patients, and an improper understanding of the concept of “expired medications” in general. This paper summaries, first, the recent literature reporting practices related to the disposal of unused medications. In this context, 48 papers from 34 countries with a total of 33,832 participants point towards a significant lack of public awareness regarding the appropriate disposal of such biologically potent chemicals. These findings are corroborated by a local survey on the disposal practices of unused medicines among pharmacy students at Saarland University. The regulatory aspects surrounding this topic, often based on the official guidelines for the disposal of expired medications and local waste management strategies, are then discussed in light of these findings. Finally, a closer inspection of the epistemic values of expired medications and different strategies for managing expired medications have been reviewed.

Removal of Antibiotics from Water by Polymer of Intrinsic Microporosity: Isotherms, Kinetics, Thermodynamics, and Adsorption Mechanism

Traces of antibiotics within domestic and industrial effluents have toxic impact on human health as well as surrounding flora and fauna. Potential increase in antibiotic resistance of microorganisms is likely to rise due to the incomplete removal of antibiotics by traditional wastewater processing, methods such as membrane filtration and biological treatment. In this study, we investigated a novel class of material termed Polymer of Intrinsic Microporosity (PIM) that is based on amorphous microporous organic materials for the application of antibiotic removal form aqueous environments. The adsorption of four commonly used antibiotics (doxycycline, ciprofloxacin, penicillin G, and amoxicillin) was evaluated and found that at least 80% of the initial concentrations was eliminated under the optimized conditions. Langmuir and Freundlich models were then employed to correlate the equilibria data; the Freundlich model fit well the data in all cases. For kinetic data, pseudo-first and second order models were examined. Pseudo-second order model fit well the kinetic data and allowed the calculation of the adsorption rate constants. Thermodynamic parameters were obtained by conducting the adsorption studies at varied reaction temperatures. Surface potential, adsorption at various solution pHs, thermogravimetric analysis (TGA), Infrared spectroscopy (IR), and surface area experiments were conducted to draw possible adsorption mechanisms. The removal of antibiotics from water by PIM-1 is likely to be governed by both surface and pore-filling adsorption and could be facilitated by electrostatic interactions between the aromatic rings and charged functional groups as well as hydrogen bond formation between the adsorbent and adsorbate. Our work shows that the application of such novel microporous material could contribute to the removal of such challenging and persistent contaminants from wastewater with further optimizations of large-scale adsorption processes.

Inhibition of anaerobic ammonium oxidation (anammox) bacteria by addition of high and low concentrations of chloramphenicol and comparison of attached- and suspended-growth

Inhibition of anammox activities was tested with two ranges of chloramphenicol (CAP) concentration (5, 10, 20, 50, and 100 mg L^-1) and (100, 500, and 1000 μg L^-1). In a short-term study, strong inhibition of activity was dependent of CAP concentration in both attached-growth (SBR-A) and suspended-growth (SBR-S) systems. The activities of attached-growth cultures at all CAP concentrations were reversible after 1 day, while activities for suspended-growth cultures were only gradually reversible dependent on the CAP concentrations. In long-term studies with daily additions of 6 mg L^-1 CAP, the anammox activity on day 41 in SBR-A had decreased to 18% baseline (SAA reduced from 0.528 to 0.096 mg N mg^-1 VSS d^-1). More rapid reduction of anammox activity was observed in SBR-S, down to 17% baseline after only 27 days (SAA decreased from 0.576 to 0.096 mg N mg^-1 VSS d^-1). Inhibition was irreversible in both SBR-S and SBR-A after the long-term study. With lower CAP additions (100-1000 μg L^-1), the activities in both reactors were stable during daily CAP addition for two weeks. Attached-growth cultures tended to be more tolerant of CAP addition than suspended-growth cultures. Both un-competitive and non-competitive models could be used to compare anammox activities with the higher CAP concentrations. The SAA_max [fx] (the maximum specific anammox activity) and _hK_i (the inhibition constant) of SBR-A were 0.48 mg N mg^-1 VSS d^-1 and 98.3 mg L^-1, respectively. The SAA_max[fx] and K_i of SBR-S were 1.25 mg N mg^-1 VSS d^-1and 71.1 mg L^-1, respectively.

Antibiotic resistance genes identified in wastewater treatment plant systems - A review

The intensive use of antibiotics for human, veterinary and agricultural purposes, results in their continuous release into the environment. Together with antibiotics, antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) are introduced into wastewater. Wastewater treatment plants (WWTPs) are believed to be probable hotspots for antibiotic resistance dissemination in the environment as they offer convenient conditions for ARB proliferation as well as for horizontal transfer of ARGs among different microorganisms. In fact, genes conferring resistance to all classes of antibiotics together with mobile genetic elements (MGEs) like plasmids, transposons, bacteriophages, integrons are detected in WWTPs in different countries. It seems that WWTPs with conventional treatment processes are capable of significant reduction of ARB but are not efficient in ARG removal. Implementation of advanced wastewater cleaning processes in addition to a conventional wastewater treatment is an important step to protect the aquatic environment. Growing interest in presence and fate of ARB and ARGs in WWTP systems resulted in the fact that knowledge in this area has increased staggeringly in the past few years. The main aim of the article is to collect and organize available data on ARGs, that are commonly detected in raw sewage, treated wastewater or activated sludge. Resistance to the antibiotics usually used in antibacterial therapy belonging to main classes like beta-lactams, macrolides, quinolones, sulfonamides, trimethoprim and tetracyclines was taken into account. The presence of multidrug efflux genes is also included in this paper. The occurrence of antibiotics may promote the selection of ARB and ARGs. As it is important to discuss the problem considering all aspects that influence it, the levels of antibiotics detected in influent and effluent of WWTPs were also presented.

Fate and behaviour of veterinary sulphonamides under denitrifying conditions

Antibiotics are among the most widely administered drugs in the growing animal food industry. Of all the antibiotics approved for agriculture, sulphonamides are of particular interest. Their spectrum of activity is broad, affecting gram-positive, gram-negative, and many protozoal organisms, and they have been used for the treatment of a wide variety of animals. Animal manure is one of primary sources of soil contamination by sulphonamides. As they have a low soil sorption potential and are therefore highly mobile in soil, they can be transported to groundwater. In the present study, papers dealing with the fate and behaviour of veterinary sulphonamides under denitrifying conditions often arising in the subsurface are reviewed. Veterinary sulphonamide-exposed conditions can result in either inhibition or stimulation of the denitrification process owing to their toxicity or stress for denitrifiers. The effect of sulphonamides on individual denitrification steps is unbalanced, which can cause accumulation of process intermediates (dinitrogen oxide, nitrites). Although research results related to veterinary sulphonamide biodegradation in a nitratereducing environment show great variety, they indicate that these compounds are biodegradable under denitrifying conditions, that their biodegradation fits the first-order kinetics model, and that microbial action is the main mechanism of their dissipation. Regarding biodegradation pathways, research to date has only focused on sulfamethoxazole. Its degradation is driven by the presence of nitrous acid, which is formed from nitrites generated by the denitrification process as an intermediate product. Nevertheless, sulfamethoxazole degradation is abiotic, meaning that it does not participate in the denitrifying metabolism. For the formation of sulfamethoxazole transformation products, including its nitro, nitroso and desamino derivatives, the presence of the primary aromatic amine group is key. As this functional group is common for all sulphonamides, it can be assumed that these transformation products are also involved in the degradation pathways of other sulphonamides.

Occurrence of antibiotics residues in hospital wastewater, wastewater treatment plant, and in surface water in Nairobi County, Kenya

The occurrence of 17 antibiotics belonging to sulfonamides, β-lactams, macrolides and aminoglycosides classes, and trimethoprim in raw hospital wastewater, wastewater treatment plant (WWTP), and surface water was determined. Residual antibiotics were quantified by LC/MS/MS. Residues of antibiotics in hospital wastewater were 3-10 times higher than that detected in WWTP and surface water. Trimethoprim, spectinomycin, ampicillin, and oxacillin were detected in all the sampled water. Sulfamethoxazole was detected at the highest concentration of 20.6, 7.8, and 6.8 μg L^-1 in hospital wastewater, WWTP and in surface water, respectively. Other detected sulfonamides were sulfamethazine, sulfadiazine, and sulfanilamide at a concentration range of 0.4-15.7 μg L^-1. Detected trimethoprim ranged from 0.4-6.6 μg L^-1, the rest of the detected antibiotics were up to 1.0 μg L^-1. The speciation of the sulfonamides at pH values relevant to sampled water was evaluated by use of pKa values. These compounds existed largely as anionic and neutral species indicating high mobility as these speciation forms are less sorbed in environmental matrices. Continuous monitoring of antibiotics residues in wastewater, surface water, and other environmental matrices is very important due to their adverse health and environmental effects. The information is useful in designing strategies for antibiotics pollution control and also in policy formulation.

TiO2 photocatalysis under natural solar radiation for the degradation of the carbapenem antibiotics imipenem and meropenem in aqueous solutions at pilot plant scale

This paper deals with the removal of two last-resort antibiotics, namely imipenem and meropenem, in aqueous solutions employing heterogeneous photocatalysis with TiO₂ under natural solar radiation at pilot plant scale. It was found that TiO₂ photocatalysis is a very efficient technique for the degradation of both compounds in aqueous solutions, albeit it's relatively low quantum efficiency. At the experimental conditions employed in the present work (compound parabolic collectors photoreactor) the optimal TiO₂ concentration was about 50 mg L^-1. Experiments conducted in various aqueous matrices lead to the conclusion that the method can be applied to real aqueous matrices, such as natural waters and wastewaters. The comparison of TiO₂ photocatalysis and natural photolysis showed an important decrease of the accumulated energy required to achieve the complete removal of both antibiotics which, in terms of normalized illumination time (t_30W), represented a reduction of 50 min for imipenem and 60 min for meropenem.

Occurrence and risk assessment of multiple classes of antibiotics in urban canals and lakes in Hanoi, Vietnam

Very little information on the occurrence and risk assessment of antibiotics in the aquatic environment is reported for Vietnam, where antibiotics are assumed to be omnipresent in urban canals and lakes at high concentrations due to the easy accessibility of antibiotics without doctor prescription. This study provides comprehensive analysis of the occurrence of 23 antibiotics in urban canals (To Lich and Kim Nguu) and lakes (West Lake, Hoan Kiem, and Yen So) in Hanoi, Vietnam. Of these 23 antibiotics, 18 were detected in urban canals at above 67.9% detection frequency (DF). The concentrations of detected antibiotics were in the range from below quantification limit (MQL) to almost 50,000 ng/L, depending on the compound and sampling site. In urban canals, median concentration of amoxicillin, erythromycin, and sulfamethoxazole was >1000 ng/L while other antibiotics such as ampicillin, chloramphenicol, clindamycin, sulfamethazine, tetracycline, tylosin and vancomycin were detected at median concentrations of <100 ng/L. Similarly, 16 target antibiotics were also detected in urban lakes. Macrolides (azithromycin, clarithromycin, and erythromycin-H₂O), fluoroquinolones (enrofloxacin and ofloxacin), lincosamides (clindamycin and lincomycin), and trimethoprim were ubiquitously detected in urban lakes (DF = 100%). In this study, potential risks of antibiotics in the investigated urban canals and lakes were assessed based on the predicted no-effect concentration (PNEC) from the existing literature for antibiotic resistance selection (PNEC_ARM) and ecological toxicity to aquatic organisms (PNEC_Ecotox). Ampicillin, amoxicillin, azithromycin, ciprofloxacin, clarithromycin, enrofloxacin, erythromycin, ofloxacin, tetracycline, and trimethoprim were found in the investigated urban canals at concentrations exceeding their PNEC_ARM and PNEC_Ecotox. Similarly, most of the target antibiotics (i.e. amoxicillin, ciprofloxacin, clarithromycin, clindamycin, enrofloxacin, erythromycin, lincomycin, ofloxacin, sulfamethoxazole, tetracycline, trimethoprim and tylosin) were detected in the investigated urban lakes at concentrations close to or exceeding PNEC_Ecotox for aquatic organisms. Further investigations on the occurrence and fate of antibiotic residues and antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) in surface waters are recommended.