Visible-light-enhanced catalytic oxidation reactions on plasmonic silver nanostructures

Atomic structure of a seed-sized gold nanoprism

The growth of nanoparticles along one or two directions leads to anisotropic nanoparticles, but the nucleation (i.e., the formation of small seeds of specific shape) has long been elusive. Here, we show the total structure of a seed-sized Au₅₆ nanoprism, in which the side Au{100} facets are surrounded by bridging thiolates, whereas the top/bottom {111} facets are capped by phosphine ligands at the corners and Br⁻ at the center. The bromide has been proved to be the key to effectively stabilize the Au{111} to fulfill a complete face-centered-cubic core. In femtosecond electron dynamics analysis, the non-evolution of transient absorption spectra of Au₅₆ is similar to that of larger-sized gold nanoclusters (n > 100), which is ascribed to the completeness of the prismatic Au₅₆ core and an effective electron relaxation pathway created by the stronger Au-Au bonds inside. This work provides some insights for the understanding of plasmonic nanoprism formation.

The formation pathway of shape-anisotropic nanoparticles is difficult to characterize and not well understood. The authors synthesize a prismatic-shaped Au₅₆ nanocluster as possible seed of a prismatic nanoparticle and characterize the structure and ligand bonding motifs, providing insight into the formation and surface protection mechanisms.

DFT Modeling of CO2 Adsorption and HCOO• Group Conversion in Anatase Au-TiO2-Based Photocatalysis

Due to the merits of carbon circulation and hydrocarbon production, solar-assisted photocatalysis has been regarded as an ideal option for securing a sustainable future of energy and environment. In the photocatalytic carbon cycle process, surface reactions including the adsorption of CO₂ and the conversion of CO₂ into CH₄, CH₃OH, etc. are crucial to be examined ascribed to their significant influence on the performance of the photocatalysis. Because the conversion reaction starts from the formation of HCOO^•, the density functional theory (DFT) model was established in this study to investigate the micromechanism of CO₂ adsorption and the conversion of CO₂ to HCOO^• group in the anatase Au-TiO₂ photocatalytic system. The CO₂ adsorption bonding in six configurations was simulated, on which basis the effects of the proportion of water molecules and the lattice temperature increase due to the local surface plasmon resonance (LSPR) on the photocatalytic CO₂ adsorption and conversion were specifically analyzed. The results show that the experimental conditions that water molecules are released before CO₂ are favorable for the formation of the adsorption configuration in which HCOO^• tends to be produced without the need of reaction activation energy. This is reasonable since the intermediate C atoms do not participate in bonding under these conditions. Moreover, Au clusters have an insignificant influence on the adsorption behaviors of CO₂ including the adsorption sites and configurations on TiO₂ surfaces. As a result, the reaction rate is reduced due to the temperature increase caused by the LSPR effect. Nevertheless, the reaction maintains a very high rate. Interestingly, configurations that require activation energy are also possible to be resulted, which exerts a positive influence of temperature on the conversion rate of CO₂. It is found that the rate of the reaction can be improved by approximately 1-10 times with a temperature rise of 50 K above the ambient.

Antimicrobial activity of chemically and biologically synthesized silver nanoparticles against some fish pathogens

Pathogens isolated from fish appear to possess considerable antimicrobial resistance and represent a problem for the economy and public health. Natural antimicrobial substitutes to traditional antibiotics represent an essential tool in the fight against antibiotic resistance. Nanotechnology has shown considerable potential in different research fields, and the antimicrobial properties of silver nanoparticles are known. Silver has been used for medical purposes since ancient times because of its bactericidal properties, and the highly reactive surfaces of silver nanoparticles (AgNPs) indicate that they might have a function in antimicrobial applications. This work aimed to study the antimicrobial properties of biologically produced AgNPs from Origanum vulgare leaves compared to chemically produced AgNPs. Both types were characterized by UV–vis spectrophotometry, TEM, and dynamic light scattering and tested against three bacterial strains (Streptococcus agalactiae, and Aeromonas hydrophila, both isolated from Nile tilapia and Vibrio alginolyticus, isolated from sea bass) and three fungal strains (Aspergillus flavus, Fusarium moniliforme, and Candida albicans, all isolated from Nile tilapia). Disk diffusion test and evaluation of ultrastructure changes of tested microorganisms treated with AgNPs by transmission electron microscopy were performed. Moreover, the hemolytic properties of AgNPs were studied on chicken and goat red blood cells. The results obtained declare that the green biological production of silver nanoparticles is safer and more effective than the chemical one; moreover, AgNPs have interesting dose-dependent antimicrobial properties, with better results for biologically produced ones; their effectiveness against tested bacterial and fungal strains opens the way to their use to limit fish diseases, increase economy and improve human health.

Research Progress of Plasmonic Nanostructure-Enhanced Photovoltaic Solar Cells

Enhancement of the electromagnetic properties of metallic nanostructures constitute an extensive research field related to plasmonics. The latter term is derived from plasmons, which are quanta corresponding to longitudinal waves that are propagating in matter by the collective motion of electrons. Plasmonics are increasingly finding wide application in sensing, microscopy, optical communications, biophotonics, and light trapping enhancement for solar energy conversion. Although the plasmonics field has relatively a short history of development, it has led to substantial advancement in enhancing the absorption of the solar spectrum and charge carrier separation efficiency. Recently, huge developments have been made in understanding the basic parameters and mechanisms governing the application of plasmonics, including the effects of nanoparticles’ size, arrangement, and geometry and how all these factors impact the dielectric field in the surrounding medium of the plasmons. This review article emphasizes recent developments, fundamentals, and fabrication techniques for plasmonic nanostructures while investigating their thermal effects and detailing light-trapping enhancement mechanisms. The mismatch effect of the front and back light grating for optimum light trapping is also discussed. Different arrangements of plasmonic nanostructures in photovoltaics for efficiency enhancement, plasmonics’ limitations, and modeling performance are also deeply explored.

Dynamical evolution of the Schottky barrier as a determinant contribution to electron-hole pair stabilization and photocatalysis of plasmon-induced hot carriers

The harnessing of plasmon-induced hot carriers promises to open new avenues for the development of clean energies and chemical catalysis. The extraction of carriers before thermalization and recombination is of fundamental importance to obtain appealing conversion yields. Here, hot carrier injection in the paradigmatic Au-TiO₂ system is studied by means of electronic and electron-ion dynamics. Our results show that pure electronic features (without considering many-body interactions or dissipation to the environment) contribute to the electron-hole separation stability. These results reveal the existence of a dynamic contribution to the interfacial potential barrier (Schottky barrier) that arises at the charge injection pace, impeding electronic back transfer. Furthermore, we show that this charge separation stabilization provides the time needed for the charge to leak to capping molecules placed over the TiO₂ surface triggering a coherent bond oscillation that will lead to a photocatalytic dissociation. We expect that our results will add new perspectives to the interpretation of the already detected long-lived hot carrier lifetimes and their catalytical effect, and concomitantly to their technological applications.

Recent Advances in Photochemical Reactions on Single-Molecule Electrical Platforms

The photochemical reaction is a very important type of chemical reactions. Visualizing and controlling photo-mediated reactions is a long-standing goal and challenge. In this regard, single-molecule electrical detection with label-free, real-time and in situ characteristics has unique advantages in monitoring the dynamic process of photoreactions at the single-molecule level. In this Review, we provide a valuable summary of the latest process of single-molecule photochemical reactions based on single-molecule electrical platforms. The single-molecule electrical detection platforms for monitoring photoreactions are displayed, including their fundamental principles, construction methods and practical applications. The single-molecule studies of two different types of light-mediated reactions are summarized as below: i) photo-induced reactions, including reversible cyclization, conformational isomerization and other photo-related reactions; ii) plasmon-mediated photoreactions, including reaction mechanisms and concrete examples, such as plasmon-induced photolysis of S-S/O-O bonds and tautomerization of porphycene. In addition, the prospects for future research directions and challenges in this field are also discussed. This article is protected by copyright. All rights reserved.

Hybrid Plasmonic Nanomaterials for Hydrogen Generation and Carbon Dioxide Reduction

The successful development of artificial photosynthesis requires finding new materials able to efficiently harvest sunlight and catalyze hydrogen generation and carbon dioxide reduction reactions. Plasmonic nanoparticles are promising candidates for these tasks, due to their ability to confine solar energy into molecular regions. Here, we review recent developments in hybrid plasmonic photocatalysis, including the combination of plasmonic nanomaterials with catalytic metals, semiconductors, perovskites, 2D materials, metal-organic frameworks, and electrochemical cells. We perform a quantitative comparison of the demonstrated activity and selectivity of these materials for solar fuel generation in the liquid phase. In this way, we critically assess the state-of-the-art of hybrid plasmonic photocatalysts for solar fuel production, allowing its benchmarking against other existing heterogeneous catalysts. Our analysis allows the identification of the best performing plasmonic systems, useful to design a new generation of plasmonic catalysts.

Plasmonic catalysis with designer nanoparticles

Catalysis is central to a more sustainable future and a circular economy. If the energy required to drive catalytic processes could be harvested directly from sunlight, the possibility of replacing contemporary processes based on terrestrial fuels by the conversion of light into chemical energy could become a step closer to reality. Plasmonic catalysis is currently at the forefront of photocatalysis, enabling one to overcome the limitations of "classical" wide bandgap semiconductors for solar-driven chemistry. Plasmonic catalysis enables the acceleration and control of a variety of molecular transformations due to the localized surface plasmon resonance (LSPR) excitation. Studies in this area have often focused on the fundamental understanding of plasmonic catalysis and the demonstration of plasmonic catalytic activities towards different reactions. In this feature article, we discuss recent contributions from our group in this field by employing plasmonic nanoparticles (NPs) with controllable features as model systems to gain insights into structure-performance relationships in plasmonic catalysis. We start by discussing the effect of size, shape, and composition in plasmonic NPs over their activities towards LSPR-mediated molecular transformations. Then, we focus on the effect of metal support interactions over activities, reaction selectivity, and reaction pathways. Next, we shift to the control over the structure in hollow NPs and nanorattles. Inspired by the findings from these model systems, we demonstrate a design-driven strategy for the development of plasmonic catalysts based on plasmonic-catalytic multicomponent NPs for two types of molecular transformations: the selective hydrogenation of phenylacetylene and the oxygen evolution reaction. Finally, future directions, challenges, and perspectives in the field of plasmonic catalysis with designer NPs are discussed. We believe that the examples and concepts presented herein may inspire work and progress in plasmonic catalysis encompassing the design of plasmonic multicomponent materials, new strategies to control reaction selectivity, and the unraveling of stability and reaction mechanisms.

Mechanistic insight into deep holes from interband transitions in Palladium nanoparticle photocatalysts

Utilizing hot electrons generated from localized surface plasmon resonance is of widespread interest in the photocatalysis of metallic nanoparticles. However, hot holes, especially generated from interband transitions, have not been fully explored for photocatalysis yet. In this study, a photocatalyzed Suzuki-Miyaura reaction using mesoporous Pd nanoparticle photocatalyst served as a model to study the role of hot holes. Quantum yields of the photocatalysts increase under shorter wavelength excitations and correlate to “deeper” energy of the holes from the Fermi level. This work suggests that deeper holes in the d-band catalyze the oxidative addition of aryl halide R-X onto Pd⁰ at the nanoparticles' surface to form R-Pd^II-X complex, thus accelerating the rate-determining step of the catalytic cycle. The hot electrons do not play a decisive role. In the future, catalytic mechanisms induced by deep holes should deserve as much attention as the well-known hot electron transfer mechanism.

•

Comparison of quantum yield across different wavelengths

•

Interband transitions from shorter wavelength excitation offering deeper holes

•

Deeper holes with stronger oxidizing power for higher quantum yield

UV-light-driven cadmium sulphide (CdS) nanocatalysts: synthesis, characterization, therapeutic and environmental applications; kinetics and thermodynamic study of photocatalytic degradation of Eosin B and Methyl Green dyes

Cadmium sulphide (CdS) nanoparticles (NPs) were synthesized through hydrothermal route and characterized by UV-Vis spectroscopy, X-ray diffraction (XRD), Energy dispersive X-ray analysis, Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy and Thermo gravimetric analysis (TGA).The band gap of CdS nanoparticles was found to be 2.38 eV. CdS NPs are crystalline aggregates with hexagonal structure as shown by SEM and XRD analysis. TGA study revealed that the synthesized nanomaterials were very stable to temperature and only 6.54% total loss occurred during heating range (25 °C-600 °C).The CdS NPs were used for the first time against the degradation of Eosin B (EB) and Methyl green (MG) dyes in aqueous solution.The degradation of EB and MG over CdS nanocatalysts followed second order kinetics. The predicted activation energies for both the dyes' reactions were 61.1 kJ/mol and 32.11 kJ/mol, respectively. About 95% and 90% dye degradation was observed at the time interval of 160 minutes for EB and MG, respectively. High percent degradation of EB was observed at high pH (pH 0) while at low pH (pH 4) high percent degradation was found for MG dye. Maximum dye degradation was found at the optimal dose (0.03 g/L) of the catalyst and at low dye concentration. The rate of EB and MG dye degradation was found to increase with increase in temperature up to 45 °C. The recyclability study showed that CdS nanoparticles could be reused for the degradation of the given dyes. Good antibacterial activity against Staphylococcus aureus was shown by CdS NPs. From the biocompatibility it was confirmed that CdS NPS are bioincompatible compatible.

Intermolecular Forces Dictate Vibrational Energy Transfer in Plasmonic-Molecule Systems

Plasmonic materials are a promising category of photocatalysts for solar energy harvesting and conversion. However, there are some significant obstacles that need to be overcome to make plasmonic catalysts commercially available. One major challenge is to obtain a systematic understanding of how to design and optimize plasmonic systems from the perspective of both plasmonic materials and reagent molecules to achieve highly efficient and selective catalysis. It is well-known that the contributions of plasmon-molecule interactions such as plasmon-induced resonant energy transfer and charge transfer to the catalytic mechanism are rather complicated and possibly multifold. Observation of these phenomena is challenging due to the highly heterogeneous nature of plasmonic substrates as well as the large difference in sizes and optical cross sections between plasmonic materials and molecules. In this work, we use a molecular perspective to examine the crucial process of energy transfer between plasmons and molecules, with the goal of determining which experimental parameters can be used to control this energy flow. We employ ultrafast surface-enhanced anti-Stokes and Stokes Raman spectroscopy to investigate vibrational energy transfer in plasmonic-molecule systems. By comparing the energy transfer kinetics of five different aromatic thiols on the picosecond time scale, we find that intermolecular forces play an important role in energy distribution in molecules adsorbed to plasmonic materials, which changes the amount of energy deposited onto the molecule and the lifetime of the energy deposited. Our work implies that careful consideration of catalyst loading and molecule adsorption geometry is crucial for enhancing or suppressing the rate and efficiency of plasmon-driven energy transfer.

Material strategies for function enhancement in plasmonic architectures

Plasmonic materials are promising for applications in enhanced sensing, energy, and advanced optical communications. These applications, however, often require chemical and physical functionality that is suited and designed for the specific application. In particular, plasmonic materials need to access the wide spectral range from the ultraviolet to the mid-infrared in addition to having the requisite surface characteristics, temperature dependence, or structural features that are not intrinsic to or easily accessed by the noble metals. Herein, we describe current progress and identify promising strategies for further expanding the capabilities of plasmonic materials both across the electromagnetic spectrum and in functional areas that can enable new technology and opportunities.

Plasmon-Accelerated Generation of Singlet Oxygen on an Au/MoS2 Nanohybrid for Enhanced Photodynamic Killing of Bacterial Pathogens/Cancerous Cells

Benefiting from its strong cytotoxic features, singlet oxygen (¹O₂) has garnered considerable research attention in photodynamic therapy (PDT) and thus, plenty of inorganic PDT agents have been recently developed. However, inorganic PDT agents consisting of metal/semiconductor hybrids are surprisingly rare, bearing very low ¹O₂ quantum yield, and their in vivo PDT applications remain elusive. Herein, we provide an unprecedented report that the Au/MoS₂ hybrid under plasmon resonant excitation can sensitize ¹O₂ generation with a quantum yield of about 0.22, which is much higher than that of the reported hybrid-based photosensitizers (PSs). This significant enhancement in ¹O₂ quantum yield is attributed to the hot-electron injection from plasmonic AuNPs to MoS₂ NSs due to the matched energy levels. Electron paramagnetic resonance (EPR) spectroscopy with spin trapping and spin labeling verifies the plasmonic generation of hot charge carriers and reactive oxygen species such as superoxide and ¹O₂. This plasmonic PDT agent shows a remarkable photodynamic bacterial inactivation in vitro and anti-cancer therapeutic ability both in vitro and in vivo, which is solely attributed to high ¹O₂ generation rather than the plasmonic photothermal effect. Hence, plasmonic Au/MoS₂ with enhanced ¹O₂ quantum yield and appreciable in vivo cancer plasmonic PDT performance holds great promise as an inorganic PS to treat near-surface tumors. As a first demonstration of how metal localized surface plasmon resonance could enhance ¹O₂ generation, the present study opens up promising opportunities for enhancing ¹O₂ quantum yield of hybrid-based PSs, leading to achieving a high therapeutic index in plasmon PDT.

Boosting Hydrogen Evolution through the Interface Effects of Amorphous NiMoO4-MoO2 and Crystalline Cu

The rational design and synthesis of a highly efficient and cost-effective electrocatalyst for hydrogen evolution reaction (HER) are of great importance for the efficient generation of sustainable energy. Herein, amorphous/crystalline heterophase Ni-Mo-O/Cu (denoted as a/c Ni-Mo-O/Cu) was synthesized by a one-pot electrodeposition method. Thanks to the introduction of metallic Cu and the formation of amorphous Ni-Mo-O, the prepared electrocatalyst exhibits favorable conductivity and abundant active sites, which are favorable to the HER progress. Moreover, the interfaces consisting of Cu and Ni-Mo-O show electron transfers between these components, which might modify the absorption/desorption energy of H atoms, thus accelerating HER activity. As expected, the prepared a/c Ni-Mo-O/Cu possesses excellent HER performance, which affords an ultralow overpotential of 34.8 mV at 10 mA cm^-2, comparable to that of 20 wt % Pt/C (35.0 mV), and remarkable stability under alkaline conditions.

Interfacial engineering of CuFeS2 quantum dots via platinum decoration with enhanced Cr(VI) reduction dynamics under UV-Vis-NIR radiation

Configuring reactive and stable catalytic interfaces is crucial to design efficient photocatalysts for Cr(VI) reduction. Herein, via the platinum decoration approach based on interfacial engineering, we developed an effective catalytic interface within novel semiconducting chalcopyrite quantum dots (Pt/CuFeS₂ QDs). Benefiting from the catalytic merits of the Pt modulated interfacial structure and electronic structure, Pt/CuFeS₂ QDs show a broader light absorption capability extending to near-infrared radiation (NIR) range with superior carriers separation performance and faster charge transfer efficiency, which delivers a three-folder faster photocatalytic Cr(VI) reduction efficiency comparing to the original CuFeS₂ QDs. Density functional theory (DFT) calculations unravel that Pt atoms prefer to be anchored with the surface S atoms to form a stable interfacial structure with faster electron transfer and Cr(VI) reduction dynamics. This work demonstrates that platinum decoration based on interfacial engineering is an effective strategy to simultaneously modulate the band structure and accelerate the interfacial reaction dynamics for semiconductor photocatalysts, which paves the way for designing highly efficient photocatalysts for light-driven environmental and energy engineering applications.

Boosting the catalytic behavior and stability of a gold catalyst with structure regulated by ceria

In this work, a series of colloidal gold nanoparticles with controllable sizes were anchored on carbon nanotubes (CNT) for the aerobic oxidation of benzyl alcohol. The intrinsic influence of Au particles on the catalytic behavior was unraveled based on different nanoscale-gold systems. The Au/CNT-A sample with smaller Au sizes deserved a faster reaction rate, mainly resulting from the higher dispersion degree (23.5%) of Au with the available exposed sites contributed by small gold particles. However, monometallic Au/CNT samples lacked long-term stability. CeO₂ was herein decorated to regulate the chemical and surface structure of the Au/CNT. An appropriate CeO₂ content tuned the sizes and chemical states of Au by electron delivery with better metal dispersion. Small CeO₂ crystals that were preferentially neighboring the Au particles facilitated the generation of Au–CeO₂ interfaces, and benefited the continuous supplementation of oxygen species. The collaborative functions between the size effect and surface chemistry accounted for the higher benzaldehyde yield and sustainably stepped-up reaction rates by Au-Ce₅/CNT with 5 wt% CeO₂.

In this work, a series of colloidal gold nanoparticles with controllable sizes and CeO₂ promotion were anchored on carbon nanotubes (CNT) for the aerobic oxidation of benzyl alcohol.

Indirect to Direct Charge Transfer Transition in Plasmon-Enabled CO2 Photoreduction

Understanding hot carrier dynamics between plasmonic nanomaterials and its adsorbate is of great importance for plasmon-enhanced photoelectronic processes such as photocatalysis, optical sensing and spectroscopic analysis. However, it is often challenging to identify specific dominant mechanisms for a given process because of the complex pathways and ultrafast interactive dynamics of the photoelectrons. Here, using CO₂ reduction as an example, the underlying mechanisms of plasmon-driven catalysis at the single-molecule level using time-dependent density functional theory calculations is clearly probed. The CO₂ molecule adsorbed on two typical nanoclusters, Ag₂₀ and Ag₁₄₇ , is photoreduced by optically excited plasmon, accompanied by the excitation of asymmetric stretching and bending modes of CO₂ . A nonlinear relationship has been identified between laser intensity and reaction rate, demonstrating a synergic interplay and transition from indirect hot-electron transfer to direct charge transfer, enacted by strong localized surface plasmons. These findings offer new insights for CO₂ photoreduction and for the design of effective pathways toward highly efficient plasmon-mediated photocatalysis.

Enhancement of Ti3C2 MXene on Au@Ag/TiO2 for the visible-light-driven photoreduction of nitroaromatics

Au@Ag/TiO2/Ti3C2 exhibits outstanding photoreduction activity at 0 °C because of the combination of efficient hot carrier generation and separation ability in one system.

Localized surface plasmon resonance effect enhanced Cu/TiO2 core–shell catalyst for boosting CO2 hydrogenation reaction

Inexpensive and nontoxic Cu/TiO2 catalysts based on the LSPR effect for boosting the CO2 hydrogenation reaction.

Plasmon-assisted facile selective gaseous isopropanol dehydrogenation over Ag nanocubes

The present research showed that the non-heating effect of plasmonic absorption caused a great increase in the acetone dehydrogenation over Ag nanocubes in high selectivity at low temperatures.

Selective Enhancement of Surface and Bulk E-Field within Porous AuRh and AuRu Nanorods

A variety of multisegmented nanorods (NRs) composed of dense Au and porous Rh and Ru segments with lengths controlled down to ca. 10 nm are synthesized within porous anodic aluminum oxide membranes. Despite the high Rh and Ru porosity (i.e., ∼40%), the porous metal segments are able to efficiently couple with the longitudinal localized surface plasmon resonance (LSPR) of Au NRs. Finite-difference time-domain simulations show that the LSPR wavelength can be precisely tuned by adjusting the Rh and Ru porosity. Additionally, light absorption inside Rh and Ru segments and the surface electric field (E-field) at Rh and Ru can be independently and selectively enhanced by varying the position of the Rh and Ru segment within the Au NR. The ability to selectively control and decouple the generation of high-energy, surface hot electrons and low-energy, bulk hot electrons within photocatalytic metals such as Rh and Ru makes these bimetallic structures great platforms for fundamental studies in plasmonics and hot-electron science.

Molecular-Level Insights on Reactive Arrangement in On-Surface Photocatalytic Coupling Reactions Using Tip-Enhanced Raman Spectroscopy

Plasmon-enhanced photocatalytic coupling reactions have been used as model systems in surface-enhanced Raman spectroscopy and tip-enhanced Raman spectroscopy (TERS) research for decades. However, the role of reactive arrangement on efficiency of these model reactions has remained largely unknown to date often leading to conflicting interpretations of experimental results. Herein, we use an interdisciplinary toolbox of nanoscale TERS imaging in combination with molecular-resolution ambient scanning tunnelling microscopy (STM) and density functional theory (DFT) modeling to investigate the role of reactive arrangement in photocatalytic coupling of 4-nitrobenzenethiol (4-NTP) to p,p'-dimercaptoazobisbenzene on single-crystal and polycrystalline Au surfaces for the first time. TERS imaging with 3 nm resolution clearly revealed a significantly higher catalytic efficiency inside a kinetically driven disordered phase of the 4-NTP adlayer on Au compared to the thermodynamically stable ordered phase. Furthermore, molecular level details of the self-assembled structures in the disordered and ordered phases obtained using ambient high-resolution STM enabled an unambiguous structure-reactivity correlation of photocatalytic coupling. Finally, quantitative mechanistic insights obtained from DFT modeling based on the accurate parameters determined from STM imaging emphatically confirmed that a combination of steric hindrance effect and energetic barrier leads to a lower reaction efficiency in the ordered phase of the 4-NTP adlayer. This fundamental study establishes the first direct structure-reactivity correlation in photocatalytic coupling and highlights the critical role of reactive arrangement in the efficiency of on-surface coupling reactions in heterogeneous catalysis at large.

Localized Orbital Excitation Drives Bond Formation in Plasmonic Catalysis

Localized surface plasmons generated on metallic nanostructures can be used to accelerate molecular transformations; however, the efficiency is limited by the challenge to control the energy/charge transfer at the interfaces. Here, we combine density functional theory (DFT) calculations and experiments to reveal the mechanism of nitrophenol reduction on Au nanoparticles under visible-light irradiation and propose a strategy to further enhance the reaction rates. DFT calculations show a reduced activation barrier under electronic excitation on Au(111), thus explaining the measured higher rates under visible-light irradiation. Furthermore, we propose a heterostructure with Au nanoparticles covered by a thin film of hexagonal boron nitride; the latter is used to decouple the molecular orbitals from the metal to enable charge localization in the molecule. DFT calculations show that by this electronic decoupling, the activation barrier can be lowered by a factor of five. This work thus provides a valuable strategy for optimizing catalytic efficiency in plasmonic photocatalysis.

The Regulation of O2 Spin State and Direct Oxidation of CO at Room Temperature Using Triboelectric Plasma by Harvesting Mechanical Energy

Oxidation reactions play a critical role in processes involving energy utilization, chemical conversion, and pollutant elimination. However, due to its spin-forbidden nature, the reaction of molecular dioxygen (O₂) with a substrate is difficult under mild conditions. Herein, we describe a system that activates O₂ via the direct modulation of its spin state by mechanical energy-induced triboelectric corona plasma, enabling the CO oxidation reaction under normal temperature and pressure. Under optimized reaction conditions, the activity was 7.2 μmol h^-1, and the energy consumption per mole CO was 4.2 MJ. The results of kinetic isotope effect, colorimetry, and density functional theory calculation studies demonstrated that electrons generated in the triboelectric plasma were directly injected into the antibonding orbital of O₂ to form highly reactive negative ions O₂^-, which effectively promoted the rate-limiting step of O₂ dissociation. The barrier of the reaction of O₂^- ions and CO molecular was 3.4 eV lower than that of O₂ and CO molecular. This work provides an effective strategy for using renewable and green mechanical energy to realize spin-forbidden reactions of small molecules.

The Regulation of O2 Spin State and Direct Oxidation of CO at Room Temperature Using Triboelectric Plasma by Harvesting Mechanical Energy

Oxidation reactions play a critical role in processes involving energy utilization, chemical conversion, and pollutant elimination. However, due to its spin-forbidden nature, the reaction of molecular dioxygen (O2) with a substrate is difficult under mild conditions. Herein, we describe a system that activates O2 via the direct modulation of its spin state by mechanical energy-induced triboelectric corona plasma, enabling the CO oxidation reaction under normal temperature and pressure. Under optimized reaction conditions, the activity was 7.2 μmol h-1, and the energy consumption per mole CO was 4.2 MJ. The results of kinetic isotope effect, colorimetry, and density functional theory calculation studies demonstrated that electrons generated in the triboelectric plasma were directly injected into the antibonding orbital of O2 to form highly reactive negative ions O2-, which effectively promoted the rate-limiting step of O2 dissociation. The barrier of the reaction of O2- ions and CO molecular was 3.4 eV lower than that of O2 and CO molecular. This work provides an effective strategy for using renewable and green mechanical energy to realize spin-forbidden reactions of small molecules.

Plasmonic O2 dissociation and spillover expedite selective oxidation of primary C-H bonds

Manipulating O₂ activation via nanosynthetic chemistry is critical in many oxidation reactions central to environmental remediation and chemical synthesis. Based on a carefully designed plasmonic Ru/TiO_2−x catalyst, we first report a room-temperature O₂ dissociation and spillover mechanism that expedites the “dream reaction” of selective primary C–H bond activation. Under visible light, surface plasmons excited in the negatively charged Ru nanoparticles decay into hot electrons, triggering spontaneous O₂ dissociation to reactive atomic ˙O. Acceptor-like oxygen vacancies confined at the Ru–TiO₂ interface free Ru from oxygen-poisoning by kinetically boosting the spillover of ˙O from Ru to TiO₂. Evidenced by an exclusive isotopic O-transfer from ¹⁸O₂ to oxygenated products, ˙O displays a synergistic action with native ˙O₂⁻ on TiO₂ that oxidizes toluene and related alkyl aromatics to aromatic acids with extremely high selectivity. We believe the intelligent catalyst design for desirable O₂ activation will contribute viable routes for synthesizing industrially important organic compounds.

Room-temperature O₂ dissociation and spillover, as driven by plasmonic Ru on oxygen-deficient TiO₂, expedite the selective oxidation of primary C–H bonds in alkyl aromatics for synthesizing industrially important organic compounds.

Photocatalytic Properties of Silver Nanospherical Arrays Driven by Surface Plasmons

Surface-enhanced Raman scattering (SERS) is a promising technique to study the plasma-driven photocatalytic reactions. Hemispherical alumina nanoarrays with a regular hexagonal arrangement are firstly prepared; then, silver hemispherical nanoarrays are synthesized on the surface of the arrays by silver evaporation. When a laser with a specific wavelength (633 nm) is irradiated on the silver nanoarrays, a large number of regularly arranged local surface plasmon enhancement regions (called “hot spots”) would be generated on its surface. After that, a layer of evenly distributed p-aminothiophenol (PATP) probe molecules was placed on the substrate and the photocatalytic reaction of PATP was driven by the local surface plasmon to form four 4′-di-mercaptoazobenzene (DMAB). Then, under the same experimental conditions, the later product was reversely reacted to form PATP molecule by the action of plasma in the presence of in situ sodium borohydride. SERS can be used to monitor the whole process of the photocatalytic reaction of PATP probe molecules driven by the plasma on the surface of the silver nanoarrays. This research achieves the drawing and erasing of molecular graphics in the micro- and nano-scales, as well as information encryption, reading, and erasing that have strong application value.

Shape-Dependent Catalytic Activity of Gold and Bimetallic Nanoparticles in the Reduction of Methylene Blue by Sodium Borohydride

In this study the catalytic activity of different gold and bimetallic nanoparticle solutions towards the reduction of methylene blue by sodium borohydride as a model reaction is investigated. By utilizing differently shaped gold nanoparticles, i.e., spheres, cubes, prisms and rods as well as bimetallic gold–palladium and gold–platinum core-shell nanorods, we evaluate the effect of the catalyst surface area as available gold surface area, the shape of the nanoparticles and the impact of added secondary metals in case of bimetallic nanorods. We track the reaction by UV/Vis measurements in the range of 190–850 nm every 60 s. It is assumed that the gold nanoparticles do not only act as a unit transferring electrons from sodium borohydride towards methylene blue but can promote the electron transfer upon plasmonic excitation. By testing different particle shapes, we could indeed demonstrate an effect of the particle shape by excluding the impact of surface area and/or surface ligands. All nanoparticle solutions showed a higher methylene blue turnover than their reference, whereby gold nanoprisms exhibited 100% turnover as no further methylene blue absorption peak was detected. The reaction rate constant k was also determined and revealed overall quicker reactions when gold or bimetallic nanoparticles were added as a catalyst, and again these were highest for nanoprisms. Furthermore, when comparing gold and bimetallic nanorods, it could be shown that through the addition of the catalytically active second metal platinum or palladium, the dye turnover was accelerated and degradation rate constants were higher compared to those of pure gold nanorods. The results explore the catalytic activity of nanoparticles, and assist in exploring further catalytic applications.

Electron and Energy Transfer Mechanisms: The Double Nature of TiO2 Heterogeneous Photocatalysis

Photocatalytic chemical transformations in the presence of irradiated TiO₂ are generally considered in terms of interfacial electron transfer. However, more elusive energy-transfer-driven reactions have been also hypothesized to occur, mainly on the basis of the indirect evidence of detected reaction products whose existence could not be justified simply by electron transfer. Unlike in homogeneous and colloidal systems, where energy transfer mechanisms have been investigated deeply for several organic syntheses, understanding of similar processes in heterogeneous systems is at only a nascent level. However, this gap of knowledge can be filled by considering the important achievements of synthetic heterogeneous photocatalysis, which bring the field closer to industrial exploitation. The present manuscript summarizes the main findings of previous literature reports and, also on the basis of some novel experimental evidences, tentatively proposes that the energy transfer in TiO₂ photocatalysis could possess a Förster-like nature.

Light assisted synthesis of poly-para-phenylene on Ag(001)

A detailed study of poly-para-phenylene (PPP) obtained by light-assisted on-surface-synthesis (OSS) on Ag(100) was carried out by scanning tunneling microscopy and spectroscopy together with density functional theory calculations. The use of light in combination with heat allows to lower by 50 K annealing temperature the each stage of the Ullmann coupling. Debromination of the 4,4″ dibromo-p-terphenyl precursors was thus realized at 300 K, the formation of the first oligomers from the organometallic intermediate by silver bridging atom release at 423 K and PPP by complete elimination of the silver at 473 K. This approach to lower the reaction temperature permits to enhance the Ag(100) surface reactivity to become comparable to that of Cu(111). The underlying mechanism of light effect was proposed to occur via surface mediated excitation, with the creation of photoexcited electrons known as hot electrons correlated with surface plasmon excitation. This original pathway combining both light and heat provides an additional parameter to control OSS by separating the precursor activation stage from the diffusion.

Plasmon-Induced Water Splitting on Ag-Alloyed Pt Single-Atom Catalysts

A promising route to realize solar-to-chemical energy conversion resorts to water splitting using plasmon photocatalysis. However, the ultrafast carrier dynamics and underlying mechanism in such processes has seldom been investigated, especially when the single-atom catalyst is introduced. Here, from the perspective of quantum dynamics at the atomic length scale and femtosecond time scale, we probe the carrier and structural dynamics of plasmon-assisted water splitting on an Ag-alloyed Pt single-atom catalyst, represented by the Ag₁₉Pt nanocluster. The substitution of an Ag atom by the Pt atom at the tip of the tetrahedron Ag₂₀ enhances the interaction between water and the nanoparticle. The excitation of localized surface plasmons in the Ag₁₉Pt cluster strengthens the charge separation and electron transfer upon illumination. These facts cooperatively turn on more than one charge transfer channels and give rise to enhanced charge transfer from the metal nanoparticle to the water molecule, resulting in rapid plasmon-induced water splitting. These results provide atomistic insights and guidelines for the design of efficient single-atom photocatalysts for plasmon-assisted water splitting.

Theoretical Insights into Excitation-Induced Oxygen Activation on a Tetrahedral Ag8 Cluster

Research on small-molecule dissociation on plasmonic silver nanoparticles is on the rise. Herein, we investigate the effect of various parameters of light, i.e., field strength, polarization direction, and energy of oscillation, on the dynamics of oxygen upon photoexcitation of the O₂@Ag₈ composite using real-time time-dependent density functional theory calculations with Ehrenfest dynamics. From our excited-state dynamics calculations, we found that increasing the strength of the external electric field brings a significant contribution to the O-O dissociation. In addition, the polarization direction of the incident light becomes important, especially at weaker field strengths. The light that is polarized along the direction of charge transfer from the metal to adsorbate and the light that is polarized along the long axis of molecular oxygen were found to enhance the bond breaking of O₂ significantly. We also found that at the weakest electric field strength, the oxygen molecule stays adsorbed to the silver cluster when the incident light resonates with low-energy excited states and desorbs away from the metal cluster with high-energy excitations. With strong electric fields, oxygen either desorbs or dissociates.

Nanocatalysis under Nanoconfinement: A Metal-Free Hybrid Coacervate Nanodroplet as a Catalytic Nanoreactor for Efficient Redox and Photocatalytic Reactions

Nature utilizes cellular and subcellular compartmentalization to efficiently drive various complex enzymatic transformations via spatiotemporal control. In this context, designing of artificial nanoreactors for efficient catalytic transformations finds tremendous importance in recent times. One key challenge remains the design of multiple catalytic centers within the confined space of a nanoreactor without unwanted agglomeration and accessibility barrier for reactants. Herein, we report a unique blend of nanoscience and chemical catalysis using a metal-free hybrid synthetic protocell as a catalytic nanoreactor for redox and photocatalytic transformations, which are otherwise incompatible in bulk aqueous medium. Hybrid coacervate nanodroplets (NDs) fabricated from 2.5 nm-sized carbon dots (CDs) and poly(diallyldimethyl)ammonium chloride have been utilized toward reductive hydrogenation of nitroarenes in the presence of sodium borohydride (NaBH₄). It has been found that the reduction mechanism follows the classical Langmuir-Hinshelwood (LH) model at the surface of embedded CDs inside the NDs via the generation of reactive surface hydroxyl groups. These NDs show excellent recyclability without any compromise on reaction kinetics and conversion yield. Importantly, spatiotemporal control over the hydrogenation reaction has been achieved using two mixed populations of coacervates. Moreover, efficient visible light-induced photoredox conversion of ferricyanide to ferrocyanide and artificial peroxidase-like activity have also been demonstrated inside these catalytic NDs. Our findings indicate that the individual polymer-bound CD inside the NDs acts as the catalytic center for both the redox and photocatalytic reactions. The present study highlights the unprecedented catalytic activity of the metal-free CD-based coacervate NDs and paves the way for next-generation catalytic nanoreactors for a wide range of chemical and enzymatic transformations.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Plasma-Driven Photocatalysis Based on Gold Nanoporous Arrays

Various effects caused by surface plasmons including enhanced electromagnetic field, local heating, and excited electrons/holes can not only redistribute the electromagnetic field in the time domain and space but also redistribute the excited carriers and drive chemical reactions. In this study, firstly, an Au nanoporous array photocatalyst with the arrayed gauge was prepared by means of the anodic alumina template. Then, the formation of 4,4′-dimercaptoazobenzene (DMAB) by the surface plasmon-driven photocatalysis under 633 nm laser irradiation was investigated by means of Raman spectroscopy using aminothiophenol (PATP) as a probe molecule on gold nananoporous arrays. In addition, sodium borohydride was introduced in situ to realize the reverse photocatalytic reaction driven by the surface plasma. With the help of FDTD software, the plasma distribution characteristics on the surface of Au nanoporous arrays were simulated and analyzed. Through this practical method, it is expected to draw specific graphics, letters, and Chinese characters on the micro/nano scale, and realize the functions of graphics drawing, information encryption, reading, and erasing on the micro/nano scale.

Focusing of in-plane hyperbolic polaritons in van der Waals crystals with tailored infrared nanoantennas

Phonon polaritons (PhPs)—light coupled to lattice vibrations—with in-plane hyperbolic dispersion exhibit ray-like propagation with large wave vectors and enhanced density of optical states along certain directions on a surface. As such, they have raised a surge of interest, promising unprecedented manipulation of infrared light at the nanoscale in a planar circuitry. Here, we demonstrate focusing of in-plane hyperbolic PhPs propagating along thin slabs of α-MoO₃. To that end, we developed metallic nanoantennas of convex geometries for both efficient launching and focusing of the polaritons. The foci obtained exhibit enhanced near-field confinement and absorption compared to foci produced by in-plane isotropic PhPs. Foci sizes as small as λ_p/4.5 = λ₀/50 were achieved (λ_p is the polariton wavelength and λ₀ is the photon wavelength). Focusing of in-plane hyperbolic polaritons introduces a first and most basic building block developing planar polariton optics using in-plane anisotropic van der Waals materials.

Enhanced solid-state plasmon catalyzed oxidation and SERS signal in the presence of transition metal cations at the surface of gold nanostructures

The effect of several metal cations (Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) on the photochemical conversion of 4-aminothiophenol (4-ATP) into 4,4'-dimercaptoazobenzene (DMAB) is probed using surface enhanced Raman scattering (SERS). The coupling reaction is carried out on the surface of Au nanoparticles and Au nanorods using 532 nm and 632.8 nm laser excitations, respectively, in the absence and presence of metal cations. Here, we report that DMAB formation on the surface of Au nanostructures - when carried out in the solid state - is augmented significantly (by a factor of 1.98 to 4.07 and 3.34 to 5.74 for Au nanoparticle and Au nanorod substrates, respectively, and depending on the metal). Furthermore, the SERS signal is also markedly enhanced. Thus, the results underpin a new way of carrying out a photochemical reaction with a higher yield along with a higher SERS signal.