An engineered PET depolymerase to break down and recycle plastic bottles

Microplastic pollution: Understanding microbial degradation and strategies for pollutant reduction

Microplastics are ubiquitous environmental pollutants with the potential for adverse impacts on ecosystems and human health. These particles originate from the fragmentation of larger plastic items, shedding from synthetic fibers, tire abrasions, and direct release from personal care products and industrial processes. Once released into the environment, microplastics can disrupt ecosystems, accumulate in organisms, cause physical harm, and carry chemical pollutants that pose risks to both wildlife and human health. There is an urgent need to comprehensively explore the multifaceted issue of microplastic pollution and understand microbial degradation to reduce environmental pollution caused by microplastics. This paper presents a comprehensive exploration of microplastics, including their types, composition, advantages, and disadvantages, as well as the journey and evolution of microplastic pollution. The impact of microplastics on the microbiome and microbial communities is elucidated, highlighting the intricate interactions between microplastics and microbial ecosystems. Furthermore, the microbial degradation of microplastics is discussed, including the identification, characterization, and culturing methods of microplastic-degrading microorganisms. Mechanisms of microplastic degradation and the involvement of microbial enzymes are elucidated to shed light on potential biotechnological applications. Strategies for reducing microplastic pollution are presented, encompassing policy recommendations and the importance of enhanced waste management practices. Finally, the paper addresses future challenges and prospects in the field, emphasizing the need for international collaboration, research advancements, and public engagement. Overall, this study underscores the urgent need for concerted efforts to mitigate microplastic pollution and offers valuable insights for researchers, policymakers, and stakeholders involved in environmental preservation.

Ultrahigh-Throughput Directed Evolution of Polymer-Degrading Enzymes Using Yeast Display

Enzymes that degrade synthetic polymers have attracted intense interest for eco-friendly plastic recycling. However, because enzymes did not evolve for the cleavage of abiotic polymers, directed evolution strategies are needed to enhance activity for plastic degradation. Previous directed evolution efforts relied on polymer degradation assays that were limited to screening ∼104 mutants. Here, we report a high-throughput yeast surface display platform to rapidly evaluate >107 enzyme mutants for increased activity in cleaving synthetic polymers. In this platform, individual yeast cells display distinct mutants, and enzyme activity is detected by a change in fluorescence upon the cleavage of a synthetic probe resembling a polymer of interest. Highly active mutants are isolated by fluorescence activated cell sorting and identified through DNA sequencing. To demonstrate this platform, we performed directed evolution of a polyethylene terephthalate (PET)-depolymerizing enzyme, leaf and branch compost cutinase (LCC). We identified activity-boosting mutations that substantially increased the kinetics of degradation of solid PET films. Biochemical assays and molecular dynamics (MD) simulations of the most active variants suggest that the H218Y mutation improves the binding of the enzyme to PET. Overall, this evolution platform increases the screening throughput of polymer-degrading enzymes by 3 orders of magnitude and identifies mutations that enhance kinetics for depolymerizing solid substrates.

Bioengineering Comamonas testosteroni CNB-1: a robust whole-cell biocatalyst for efficient PET microplastic degradation

The escalating crisis of polyethylene terephthalate (PET) microplastic contamination in biological wastewater treatment systems is a pressing environmental concern. These microplastics inevitably accumulate in sewage sludge due to the absence of effective removal technologies. Addressing this urgent issue, this study introduces a novel approach using DuraPETase, a potent enzyme with enhanced PET hydrolytic activity at ambient temperatures. Remarkably, this enzyme was successfully secreted from Comamonas testosteroni CNB-1, a dominant species in the active sludge. The secreted DuraPETase showed significant hydrolytic activity toward p-NPB and PET nanoplastics. Furthermore, the CNB-1 derived whole-cell biocatalyst was able to depolymerize PET microplastics under ambient temperature, achieving a degradation efficiency of 9% within 7 days. The CNB-1-based whole biocatalysts were also capable of utilizing PET degradation intermediates, such as terephthalic acid (TPA) and ethylene glycol (EG), and bis(2-hydroxyethyl)-TPA (BHET), for growth. This indicates that it can completely mineralize PET, as opposed to merely breaking it down into smaller molecules. This research highlights the potential of activated sludge as a potent source for insitu microplastic removal.

Construction of molecular enrichment accelerators via assembly of enzyme surface grafted polymer and cyclodextrin achieving rapid and stable ester catalysis for biodiesel synthesis

Efficient and stable catalysis has always been the core concept of enzyme catalysis in industrial processes for manufacturing. Here, we constructed molecular enrichment accelerators to synergistically enhance enzyme activity and stability by assembling enzyme surface grafted polymer and cyclodextrin. At 40 °C, the enzyme activity of CalB-PNIPAM212/β-CD was 2.9 times that of CalB-PNIPAM212. The enzyme activity of CalB-PNIPAM428/γ-CD had reached 1.61 times that of CalB. At the same time, the stability of CalB-PNIPAM212/β-CD and CalB-PNIPAM428/γ-CD are slightly better than that of CalB under high temperature, organic solution and extreme pH conditions. The synergistic increase in activity and stability of the lipase-polymer assembly was achieved due to the structure of assembly, in which the role of cyclodextrin could enrich substrate affecting molecular diffusion. In addition, the lipase-polymer assembly proved to be an efficient catalyst for biodiesel synthesis, with a biodiesel conversion 1.4 times that of CalB at 60 °C. Therefore, this simple and low-cost lipase-polymer assembly provides new possibilities for the construction of high-efficiency industrial biocatalytic catalysts.

Advances on micro/nanoplastics and their effects on the living organisms: A review

Micro/nanoplastics (MPs) are attracting increasing attention owing to the potential threats they pose to the sustainability of the environment and the health of living organisms. Thus, a comprehensive understanding of the influence of MPs on living organisms is vital for developing countermeasures. We conducted an extensive literature search to retrieve the articles related to MPs via the Web of Science. Accordingly, 152 articles published in the last decade and in influential journals were selected to analyze the effects of MPs on plants, animals, microorganisms, and humans as well as the current status, hotspots, and trends of studies on MPs. The results showed that owing to the special characteristics of MPs and anthropogenic activities, MPs have become ubiquitous worldwide. MPs are ingested by plants and animals and enter the human body through various pathways, resulting in numerous adverse effects, such as growth inhibition, oxidative stress, inflammation, organ damage, and germ cell lesions. Moreover, they affect microorganisms by reshaping the structure and function of microbial communities and changing the spread pathway. However, microorganisms can also contribute to the degradation of MPs. With increasing evidence of the adverse effects of MPs on biota, coping with MP pollution and mitigating harmful outcomes have emerged as major challenges. This review focuses on (1) the main effects of MPs on living organisms, ranging from microorganisms to humans, (2) the current status and hotspots of studies related to MPs, and (3) the challenges and prospects of further studies on MPs.

Enzyme selection, optimization, and production toward biodegradation of post-consumer poly(ethylene terephthalate) at scale

Poly(ethylene terephthalate) (PET) is one of the world's most widely used polyester plastics. Due to its chemical stability, PET is extremely difficult to hydrolyze in a natural environment. Recent discoveries in new polyester hydrolases and breakthroughs in enzyme engineering strategies have inspired enormous research on biorecycling of PET. This study summarizes our research efforts toward large-scale, efficient, and economical biodegradation of post-consumer waste PET, including PET hydrolase selection and optimization, high-yield enzyme production, and high-capacity enzymatic degradation of post-consumer waste PET. First, genes encoding PETase and MHETase from Ideonella sakaiensis and the ICCG variant of leaf-branch compost cutinase (LCCICCG ) were codon-optimized and expressed in Escherichia coli BL21(DE3) for high-yield production. To further lower the enzyme production cost, a pelB leader sequence was fused to LCCICCG so that the enzyme can be secreted into the medium to facilitate recovery. To help bind the enzyme on the hydrophobic surface of PET, a substrate-binding module in a polyhydroxyalkanoate depolymerase from Alcaligenes faecalis (PBM) was fused to the C-terminus of LCCICCG . The resulting four different LCCICCG variants (LCC, PelB-LCC, LCC-PBM, and PelB-LCC-PBM), together with PETase and MHETase, were compared for PET degradation efficiency. A fed-batch fermentation process was developed to produce the target enzymes up to 1.2 g L-1 . Finally, the best enzyme, PelB-LCC, was selected and used for the efficient degradation of 200 g L-1 recycled PET in a well-controlled, stirred-tank reactor. The results will help develop an economical and scalable biorecycling process toward a circular PET economy.

Advances in enzymatic and organismal technologies for the recycling and upcycling of petroleum-derived plastic waste

Biological catalysts are emerging with the capability to depolymerize a wide variety of plastics. Improving and discovering these catalysts has leveraged a range of tools, including microbial ecology studies, high-throughput selections, and computationally guided mutational studies. In this review, we discuss the prospects for biological solutions to plastic recycling and upcycling with a focus on major advances in polyethylene terephthalate depolymerization, expanding the range of polymers with known biological catalysts, and the utilization of derived products. We highlight several recent improvements in enzymes and reaction properties, the discovery of a wide variety of novel plastic-depolymerizing biocatalysts, and how depolymerization products can be utilized in recycling and upcycling.

Upcycling of PET oligomers from chemical recycling processes to PHA by microbial co-cultivation

Polyethylene terephthalate (PET) is the most widely consumed polyester plastic and can be recycled by many chemical processes, of which glycolysis is most cost-effective and commercially viable. However, PET glycolysis produces oligomers due to incomplete depolymerization, which are undesirable by-products and require proper disposal. In this study, the PET oligomers from chemical recycling processes were completely bio-depolymerized into monomers and then used for the biosynthesis of biodegradable plastics polyhydroxyalkanoates (PHA) by co-cultivation of two engineered microorganisms Escherichia coli BL21 (DE3)-LCCICCG and Pseudomonas putida KT2440-ΔRDt-ΔZP46C-M. E. coli BL21 (DE3)-LCCICCG was used to secrete the PET hydrolase LCCICCG into the medium to directly depolymerize PET oligomers. P. putida KT2440-ΔRDt-ΔZP46C-M that mastered the metabolism of aromatic compounds was engineered to accelerate the hydrolysis of intermediate products mono-2-(hydroxyethyl) terephthalate (MHET) by expressing IsMHETase, and biosynthesize PHA using ultimate products terephthalate and ethylene glycol depolymerized from the PET oligomers. The population ratios of the two microorganisms during the co-cultivation were characterized by fluorescent reporter system, and revealed the collaboration of the two microorganisms to bio-depolymerize and bioconversion of PET oligomers in a single process. This study provides a biological strategy for the upcycling of PET oligomers and promotes the plastic circular economy.

A lesson from polybutylene succinate plastisphere to the discovery of novel plastic degrading enzyme genes in marine vibrios

Polybutylene succinate (PBS) is an eco-friendly green plastic. However, PBS was shown as being non-biodegradable in marine environments, and up until now, only a limited number of PBS-degrading marine microbes have been discovered. We first set up in vitro PBS- and PBSA (polybutylene succinate adipate)-plastispheres to characterize novel PBS-degrading marine microbes. Microbial growth and oxygen consumption were observed in both PBS- and PBSA-plastispheres enriched with natural seawater collected from Usujiri, Hokkaido, Japan, and Vibrionaceae and Pseudoalteromonadaceae were significantly enriched on these films. Further gene identification indicated that vibrios belonging to the Gazogenes clade possess genes related to a PBS degrading enzyme (PBSase). The PBS degradation assay for six Gazogenes clade vibrios identified Vibrio ruber, Vibrio rhizosphaerae, and Vibrio spartinae as being capable of degrading PBS. We further identified the gene responsible for PBSase from the type strain of V. ruber, and the purified recombinant vibrio PBSase was found to have low-temperature adaptation and was active under high NaCl concentrations. We also provided docking models between the vibrio PBSase and PBS and PBSA units to show how vibrio PBSase interacts with each substrate compared to the Acidovorax PBSase. These results could contribute to a more sustainable society through further utilization of PBS in marine environments and plastic recycling.

Next-generation feedstocks methanol and ethylene glycol and their potential in industrial biotechnology

Microbial fermentation processes are expected to play an important role in reducing dependence on fossil-based raw materials for the production of everyday chemicals. In order to meet the growing demand for biotechnological products in the future, alternative carbon sources that do not compete with human nutrition must be exploited. The chemical conversion of the industrially emitted greenhouse gas CO2 into microbially utilizable platform chemicals such as methanol represents a sustainable strategy for the utilization of an abundant carbon source and has attracted enormous scientific interest in recent years. A relatively new approach is the microbial synthesis of products from the C2-compound ethylene glycol, which can also be synthesized from CO2 and non-edible biomass and, in addition, can be recovered from plastic waste. Here we summarize the main chemical routes for the synthesis of methanol and ethylene glycol from sustainable resources and give an overview of recent metabolic engineering work for establishing natural and synthetic microbial assimilation pathways. The different metabolic routes for C1 and C2 alcohol-dependent bioconversions were compared in terms of their theoretical maximum yields and their oxygen requirements for a wide range of value-added products. Assessment of the process engineering challenges for methanol and ethylene glycol-based fermentations underscores the theoretical advantages of new synthetic metabolic routes and advocates greater consideration of ethylene glycol, a C2 substrate that has received comparatively little attention to date.

Sustainable production and degradation of plastics using microbes

Plastics are indispensable in everyday life and industry, but the environmental impact of plastic waste on ecosystems and human health is a huge concern. Microbial biotechnology offers sustainable routes to plastic production and waste management. Bacteria and fungi can produce plastics, as well as their constituent monomers, from renewable biomass, such as crops, agricultural residues, wood and organic waste. Bacteria and fungi can also degrade plastics. We review state-of-the-art microbial technologies for sustainable production and degradation of bio-based plastics and highlight the potential contributions of microorganisms to a circular economy for plastics.

Degradation of polypropylene by fungi Coniochaeta hoffmannii and Pleurostoma richardsiae

The urgent need for better disposal and recycling of plastics has motivated a search for microbes with the ability to degrade synthetic polymers. While microbes capable of metabolizing polyurethane and polyethylene terephthalate have been discovered and even leveraged in enzymatic recycling approaches, microbial degradation of additive-free polypropylene (PP) remains elusive. Here we report the isolation and characterization of two fungal strains with the potential to degrade pure PP. Twenty-seven fungal strains, many isolated from hydrocarbon contaminated sites, were screened for degradation of commercially used textile plastic. Of the candidate strains, two identified as Coniochaeta hoffmannii and Pleurostoma richardsiae were found to colonize the plastic fibers using scanning electron microscopy (SEM). Further experiments probing degradation of pure PP films were performed using C. hoffmannii and P. richardsiae and analyzed using SEM, Raman spectroscopy and Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR). The results showed that the selected fungi were active against pure PP, with distinct differences in the bonds targeted and the degree to which each was altered. Whole genome and transcriptome sequencing was conducted for both strains and the abundance of carbohydrate active enzymes, GC content, and codon usage bias were analyzed in predicted proteomes for each. Enzymatic assays were conducted to assess each strain's ability to degrade naturally occurring compounds as well as synthetic polymers. These investigations revealed potential adaptations to hydrocarbon-rich environments and provide a foundation for further investigation of PP degrading activity in C. hoffmannii and P. richardsiae.

Biodegradation of polyethylene terephthalate (PET) by diverse marine bacteria in deep-sea sediments

PET plastic waste entering the oceans is supposed to take hundreds of years to degrade and tends to accumulate in the deep sea. However, we know little about the bacteria capable of plastic degradation therein. To determine whether PET-degrading bacteria are present in deep-sea sediment, we collected the samples from the eastern central Pacific Ocean and initiated microbial incubation with PET as the carbon source. After enrichment with PET for 2 years, we gained all 15 deep-sea sediment communities at five oceanic sampling sites. Bacterial isolation for pure culture and further growth tests confirmed that diverse bacteria possess degradation ability including Alcanivorax xenomutans BC02_1_A5, Marinobacter sediminum BC31_3_A1, Marinobacter gudaonensis BC06_2_A6, Thalassospira xiamenensis BC02_2_A1 and Nocardioides marinus BC14_2_R3. Furthermore, four strains were chosen as representatives to reconfirm the PET degradation capability by SEM, weight loss and UPLC-MS. The results showed that after 30-day incubation, 1.3%-1.8% of PET was lost. De-polymerization of PET by the four strains was confirmed by the occurrence of the PET monomer of MHET and TPA as the key degradation products. Bacterial consortia possessing PET-degrading potential are prevalent and diverse and might play a key role in the removal of PET pollutants in deep oceans.

Impacts of QM region sizes and conformation numbers on modelling enzyme reactions: a case study of polyethylene terephthalate hydrolase

A quantum mechanics/molecular mechanics (QM/MM) approach is a broadly used tool in computational enzymology. Treating the QM region with a high-level DFT method is one of the important branches. Here, taking leaf-branch compost cutinase-catalyzed polyethylene terephthalate depolymerization as an example, the convergence behavior of energy barriers as well as key structural and charge features with respect to the size of the QM region (up to 1000 atoms) is systematically investigated. BP86/6-31G(d)//CHARMM and M06-2X/6-311G(d,p)//CHARMM level of theories were applied for geometry optimizations and single-point energy calculations, respectively. Six independent enzyme conformations for all the four catalytic steps (steps (i)-(iv)) were considered. Most of the twenty-four cases show that at least 500 QM atoms are needed while only two rare cases show that ∼100 QM atoms are sufficient for convergence when only a single conformation was considered. This explains why most previous studies showed that 500 or more QM atoms are required while a few others showed that ∼100 QM atoms are sufficient for DFT/MM calculations. More importantly, average energy barriers and key structural/charge features from six conformations show an accelerated convergence than that in a single conformation. For instance, to reach energy barrier convergence (within 2.0 kcal mol-1) for step (ii), only ∼100 QM atoms are required if six conformations are considered while 500 or more QM atoms are needed with a single conformation. The convergence is accelerated to be more rapid if hundreds and thousands of conformations were considered, which aligns with previous findings that only several dozens of QM atoms are required for convergence with semi-empirical QM/MM MD simulations.

Expression and engineering of PET-degrading enzymes from Microbispora, Nonomuraea, and Micromonospora

IMPORTANCE

Mismanagement of PET plastic waste significantly threatens human and environmental health. Together with the relentless increase in plastic production, plastic pollution is an issue of rising concern. In response to this challenge, scientists are investigating eco-friendly approaches, such as bioprocessing and microbial factories, to sustainably manage the growing quantity of plastic waste in our ecosystem. Industrial applicability of enzymes capable of degrading PET is limited by numerous factors, including their scarcity in nature. The objective of this study is to enhance our understanding of this group of enzymes by identifying and characterizing novel enzymes that can facilitate the breakdown of PET waste. This data will expand the enzymatic repertoire and provide valuable insights into the prerequisites for successful PET degradation.

From nature to industry: Harnessing enzymes for biocatalysis

Biocatalysis harnesses enzymes to make valuable products. This green technology is used in countless applications from bench scale to industrial production and allows practitioners to access complex organic molecules, often with fewer synthetic steps and reduced waste. The last decade has seen an explosion in the development of experimental and computational tools to tailor enzymatic properties, equipping enzyme engineers with the ability to create biocatalysts that perform reactions not present in nature. By using (chemo)-enzymatic synthesis routes or orchestrating intricate enzyme cascades, scientists can synthesize elaborate targets ranging from DNA and complex pharmaceuticals to starch made in vitro from CO2-derived methanol. In addition, new chemistries have emerged through the combination of biocatalysis with transition metal catalysis, photocatalysis, and electrocatalysis. This review highlights recent key developments, identifies current limitations, and provides a future prospect for this rapidly developing technology.

Biodegradation of Poly(ethylene terephthalate) by Bacillus safensis YX8

Due to the extensive utilization of poly (ethylene terephthalate) (PET), a significant amount of PET waste has been discharged into the environment, endangering both human health and the ecology. As an eco-friendly approach to PET waste treatment, biodegradation is dependent on efficient strains and enzymes. In this study, a screening method was first established using polycaprolactone (PCL) and PET nanoparticles as substrates. A PET-degrading strain YX8 was isolated from the surface of PET waste. Based on the phylogenetic analysis of 16S rRNA and gyrA genes, this strain was identified as Bacillus safensis. Strain YX8 demonstrated the capability to degrade PET nanoparticles, resulting in the production of terephthalic acid (TPA), mono (2-hydroxyethyl) terephthalic acid (MHET), and bis (2-hydroxyethyl) terephthalic acid (BHET). Erosion spots on the PET film were observed after incubation with strain YX8. Furthermore, the extracellular enzymes produced by strain YX8 exhibited the ability to form a clear zone on the PCL plate and to hydrolyze PET nanoparticles to generate TPA, MHET, and BHET. This work developed a method for the isolation of PET-degrading microorganisms and provides new strain resources for PET degradation and for the mining of functional enzymes.

Mutexa: A Computational Ecosystem for Intelligent Protein Engineering

Protein engineering holds immense promise in shaping the future of biomedicine and biotechnology. This Review focuses on our ongoing development of Mutexa, a computational ecosystem designed to enable "intelligent protein engineering". In this vision, researchers will seamlessly acquire sequences of protein variants with desired functions as biocatalysts, therapeutic peptides, and diagnostic proteins through a finely-tuned computational machine, akin to Amazon Alexa's role as a versatile virtual assistant. The technical foundation of Mutexa has been established through the development of a database that combines and relates enzyme structures and their respective functions (e.g., IntEnzyDB), workflow software packages that enable high-throughput protein modeling (e.g., EnzyHTP and LassoHTP), and scoring functions that map the sequence-structure-function relationship of proteins (e.g., EnzyKR and DeepLasso). We will showcase the applications of these tools in benchmarking the convergence conditions of enzyme functional descriptors across mutants, investigating protein electrostatics and cavity distributions in SAM-dependent methyltransferases, and understanding the role of nonelectrostatic dynamic effects in enzyme catalysis. Finally, we will conclude by addressing the future steps and fundamental challenges in our endeavor to develop new Mutexa applications that assist the identification of beneficial mutants in protein engineering.

Solvent-Free Depolymerization of Plastic Waste Enabled by Plastic-Catalyst Interfacial Engineering

Depolymerization of condensation polymers by chemolysis often suffers from the large usage of solvents and homogeneous catalysts such as acids, bases, and metal salts. The catalytic efficiency of heterogeneous catalysts is largely constrained by the poor interfacial contact between solid catalysts and solid plastics below melting points. We report here our discovery of autogenous heterogeneous catalyst layer on polyethylene terephthalate surfaces during the generally believed homogeneous catalytic depolymerization process. Inspired by the "contact mass" concept in industrial chlorosilane production, we further demonstrate that the construction of plastic-catalyst solid-solid interfaces enables solvent-free depolymerization of polyethylene terephthalate by vapor phase methanolysis at relatively low temperatures. Trace amounts of earth-abundant element (zinc) introduced by electrostatic adsorption is sufficient for catalyzing the depolymerization. The concept of plastic-catalyst contact mass interfacial catalysis might inspire new pathways for tackling plastic waste problems.

Computational design of highly efficient thermostable MHET hydrolases and dual enzyme system for PET recycling

Recently developed enzymes for the depolymerization of polyethylene terephthalate (PET) such as FAST-PETase and LCC-ICCG are inhibited by the intermediate PET product mono(2-hydroxyethyl) terephthalate (MHET). Consequently, the conversion of PET enzymatically into its constituent monomers terephthalic acid (TPA) and ethylene glycol (EG) is inefficient. In this study, a protein scaffold (1TQH) corresponding to a thermophilic carboxylesterase (Est30) was selected from the structural database and redesigned in silico. Among designs, a double variant KL-MHETase (I171K/G130L) with a similar protein melting temperature (67.58 °C) to that of the PET hydrolase FAST-PETase (67.80 °C) exhibited a 67-fold higher activity for MHET hydrolysis than FAST-PETase. A fused dual enzyme system comprising KL-MHETase and FAST-PETase exhibited a 2.6-fold faster PET depolymerization rate than FAST-PETase alone. Synergy increased the yield of TPA by 1.64 fold, and its purity in the released aromatic products reached 99.5%. In large reaction systems with 100 g/L substrate concentrations, the dual enzyme system KL36F achieved over 90% PET depolymerization into monomers, demonstrating its potential applicability in the industrial recycling of PET plastics. Therefore, a dual enzyme system can greatly reduce the reaction and separation cost for sustainable enzymatic PET recycling.

High-Value Oil-Water Separation Materials Prepared from Waste Polyethylene Terephthalate

As one of the most common forms of waste, waste PET is a serious pollutant in natural and human living environments. There is an urgent need to recycle PET. For this study, the complete degradation of PET was realized at a low temperature. A lipophilic hydrophobic membrane was formed on the surface of a stainless steel mesh (SSM) using a simple dip coating method, and an oil-water separation material was successfully prepared. After loading with degradation products, the surface roughness of SSM increased from 19.09 μm to 62.33 μm. The surface changed from hydrophilic to hydrophobic, and the water contact angle increased to 123°. The oil-water separation flux of the modified SSM was 9825 L/(m2·h), and the separation efficiency was 98.99%. The modified SSM had good reuse performance. This hydrophobic modification method can also be used to modify other porous substrates, such as activated carbon, filter paper, foam, and other materials. The porous substrate modified by the degradation product of waste PET was used to prepare oil-water separation materials, not only solving the problem of white pollution but also reducing the dependence on non-renewable resources in the conventional methods used for the preparation of oil-water separation materials. This study provides new raw materials and methods for the industrial production of oil-water separation materials, which have important application prospects.

Highly Efficient Depolymerization of Waste Polyesters Enabled by Transesterification/Hydrogenation Relay Under Mild Conditions

The efficient depolymerization of polyesters under mild conditions remains a significant challenge. Herein, we demonstrate a highly efficient strategy for the degradation of a diverse array of waste polyesters as low to 80 °C, 1 bar H2 . The key to the success of this transformation relied on the initial transesterification of macromolecular polyester into more degradable oligomeric fragments in the presence of CH3 OH and the subsequent hydrogenation by the use of the rationally designed quinaldine-based Ru complex. Controlled experiments and preliminary mechanistic studies disclosed the quinaldine-based catalysts could be hydrogenated to the eventually active species, which has been confirmed by X-ray diffraction analysis and directly used as a catalyst in the hydrogenolysis of polyester. The strong viability and high activity of this new species in protic solvent were explained in detail. Besides, the crucial role of CH3 OH in promoting reaction efficiency during the whole process was also elucidated. The synthetic utility of this method was further illustrated by preparing 1,4-cyclohexanedimethanol (CHDM) from waste polyethylene terephthalate (PET).

DeepTM: A deep learning algorithm for prediction of melting temperature of thermophilic proteins directly from sequences

Thermally stable proteins find extensive applications in industrial production, pharmaceutical development, and serve as a highly evolved starting point in protein engineering. The thermal stability of proteins is commonly characterized by their melting temperature (Tm). However, due to the limited availability of experimentally determined Tm data and the insufficient accuracy of existing computational methods in predicting Tm, there is an urgent need for a computational approach to accurately forecast the Tm values of thermophilic proteins. Here, we present a deep learning-based model, called DeepTM, which exclusively utilizes protein sequences as input and accurately predicts the Tm values of target thermophilic proteins on a dataset consisting of 7790 thermophilic protein entries. On a test set of 1550 samples, DeepTM demonstrates excellent performance with a coefficient of determination (R2) of 0.75, Pearson correlation coefficient (P) of 0.87, and root mean square error (RMSE) of 6.24 ℃. We further analyzed the sequence features that determine the thermal stability of thermophilic proteins and found that dipeptide frequency, optimal growth temperature (OGT) of the host organisms, and the evolutionary information of the protein significantly affect its melting temperature. We compared the performance of DeepTM with recently reported methods, ProTstab2 and DeepSTABp, in predicting the Tm values on two blind test datasets. One dataset comprised 22 PET plastic-degrading enzymes, while the other included 29 thermally stable proteins of broader classification. In the PET plastic-degrading enzyme dataset, DeepTM achieved RMSE of 8.25 ℃. Compared to ProTstab2 (20.05 ℃) and DeepSTABp (20.97 ℃), DeepTM demonstrated a reduction in RMSE of 58.85% and 60.66%, respectively. In the dataset of thermally stable proteins, DeepTM (RMSE=7.66 ℃) demonstrated a 51.73% reduction in RMSE compared to ProTstab2 (RMSE=15.87 ℃). DeepTM, with the sole requirement of protein sequence information, accurately predicts the melting temperature and achieves a fully end-to-end prediction process, thus providing enhanced convenience and expediency for further protein engineering.

Incorporation of cinnamaldehyde, carvacrol, and eugenol into zein films for active food packaging: enhanced mechanical properties, antimicrobial activity, and controlled release

Active packaging with antimicrobial functions to improve the quality and extend the shelf life of food products has gained great interest. Because commercial plastic packaging materials are not biodegradable and cause great environmental problems, plant-derived natural materials have been widely studied for the application of biodegradable packaging materials. Herein, we reported a study of essential oils (EOs)-loaded zein film. Cinnamaldehyde (CIN), carvacrol, and eugenol were added to equip the films with antimicrobial effects, while polyethylene glycol (PEG) and oleic acid (OA) were selected for the improvements of mechanical properties. The results showed that PEG efficiently improves the tensile strength and elongation (%E) of zein films compared to OA, although PEG induced weaker water barrier properties of the films than OA. FTIR spectra confirmed the formation of the hydrogen bonds between zein and PEG/OA. The EO-embedded zein film showed better antimicrobial effects than EO themselves. CIN-embedded films showed the highest antimicrobial effect among the three EOs. The sizes of the inhibition zones against Staphylococcus aureus of PEG-added zein films with 1%, 3%, and 5% CIN were 5.67, 12.67, and 16.67 mm, which were larger than that of pure CIN, with the sizes of 0.00, 3.00, and 4.67 mm, respectively. The developed films demonstrate a gradual release of EOs and show antimicrobial effects up to 96 h, indicating their high potential for the applications as active food packaging.

Thermostability enhancement of polyethylene terephthalate degrading PETase using self- and nonself-ligating protein scaffolding approaches

Polyethylene terephthalate (PET) hydrolase enzymes show promise for enzymatic PET degradation and green recycling of single-use PET vessels representing a major source of global pollution. Their full potential can be unlocked with enzyme engineering to render activities on recalcitrant PET substrates commensurate with cost-effective recycling at scale. Thermostability is a highly desirable property in industrial enzymes, often imparting increased robustness and significantly reducing quantities required. To date, most engineered PET hydrolases show improved thermostability over their parental enzymes. Here, we report engineered thermostable variants of Ideonella sakaiensis PET hydrolase enzyme (IsPETase) developed using two scaffolding strategies. The first employed SpyCatcher-SpyTag technology to covalently cyclize IsPETase, resulting in increased thermostability that was concomitant with reduced turnover of PET substrates compared to native IsPETase. The second approach using a GFP-nanobody fusion protein (vGFP) as a scaffold yielded a construct with a melting temperature of 80°C. This was further increased to 85°C when a thermostable PETase variant (FAST PETase) was scaffolded into vGFP, the highest reported so far for an engineered PET hydrolase derived from IsPETase. Thermostability enhancement using the vGFP scaffold did not compromise activity on PET compared to IsPETase. These contrasting results highlight potential topological and dynamic constraints imposed by scaffold choice as determinants of enzyme activity.

Synthetic biology tools for environmental protection

Synthetic biology transforms the way we perceive biological systems. Emerging technologies in this field affect many disciplines of science and engineering. Traditionally, synthetic biology approaches were commonly aimed at developing cost-effective microbial cell factories to produce chemicals from renewable sources. Based on this, the immediate beneficial impact of synthetic biology on the environment came from reducing our oil dependency. However, synthetic biology is starting to play a more direct role in environmental protection. Toxic chemicals released by industries and agriculture endanger the environment, disrupting ecosystem balance and biodiversity loss. This review highlights synthetic biology approaches that can help environmental protection by providing remediation systems capable of sensing and responding to specific pollutants. Remediation strategies based on genetically engineered microbes and plants are discussed. Further, an overview of computational approaches that facilitate the design and application of synthetic biology tools in environmental protection is presented.

Biodegradation of PET by the membrane-anchored PET esterase from the marine bacterium Rhodococcus pyridinivorans P23

Evidence for microbial biodegradation of polyethylene terephthalate (PET) has been reported, but little is known about the PET biodegradation process and molecular mechanism by marine microorganisms. Here, we show the biodegradation of PET by the membrane-anchored PET esterase from the marine bacterium Rhodococcus pyridinivorans P23, elucidate the properties of this enzyme, and propose the PET biodegradation by this strain in biofilm. We identify the PET-degrading enzyme dubbed PET esterase through activity tracking. In addition to depolymerizing PET, it hydrolyzes MHET into TPA under acid conditions. We prove that it is a low and constitutively transcribed, membrane-anchored protein displayed on the cell surface. Furthermore, we also investigate the microbial groups possessing PET esterase coupled with the TPA degradation pathway, mainly in the phyla Proteobacteria and Actinobacteriota. Clarification of the microbial PET biodegradation in the marine environment will contribute to the understanding of bioremediation of marine PET pollution.

Two-Step Chemo-Microbial Degradation of Post-Consumer Polyethylene Terephthalate (PET) Plastic Enabled by a Biomass-Waste Catalyst

Polyethylene terephthalate (PET) pollution has significant environmental consequences; thus, new degradation methods must be explored to mitigate this problem. We previously demonstrated that a consortium of three Pseudomonas and two Bacillus species can synergistically degrade PET in culture. The consortium more readily consumes bis(2-hydroxyethyl) terephthalate (BHET), a byproduct created in PET depolymerization, compared to PET, and can fully convert BHET into metabolically usable monomers, namely terephthalic acid (TPA) and ethylene glycol (EG). Because of its crystalline structure, the main limitation of the biodegradation of post-consumer PET is the initial transesterification from PET to BHET, depicting the need for a transesterification step in the degradation process. Additionally, there have been numerous studies done on the depolymerization reaction of PET to BHET, yet few have tested the biocompatibility of this product with a bacterial consortium. In this work, a two-step process is implemented for sustainable PET biodegradation, where PET is first depolymerized to form BHET using an orange peel ash (OPA)-catalyzed glycolysis reaction, followed by the complete degradation of the BHET glycolysis product by the bacterial consortium. Results show that OPA-catalyzed glycolysis reactions can fully depolymerize PET, with an average BHET yield of 92% (w/w), and that the reaction product is biocompatible with the bacterial consortium. After inoculation with the consortium, 19% degradation of the glycolysis product was observed in 2 weeks, for a total degradation percentage of 17% when taking both steps into account. Furthermore, the 10-week total BHET degradation rate was 35%, demonstrating that the glycolysis products are biocompatible with the consortium for longer periods of time, for a total two-step degradation rate of 33% over 10 weeks. While we predict that complete degradation is achievable using this method, further experimentation with the consortium can allow for a circular recycling process, where TPA can be recovered from culture media and reused to create new materials.

Metal-free recycling of waste polyethylene terephthalate mediated by TBD protic ionic salts: the crucial role of anionic ligands

The structure-activity relationships of 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) based protic ionic salts for polyethylene terephthalate (PET) glycolysis by ethylene glycol (EG) were comprehensively investigated through theoretical prediction and experimental verification. The proton capture ability of the anionic ligand from EG is positively correlated with the activity of the catalyst, as the generation of EG- was crucial for the chain breaking reaction via nucleophilic attack on the carbonyl group. Furthermore, density functional theory calculations demonstrated that the HTBD cation and anionic ligands work in a cooperative manner in the PET glycolysis reaction, where the ligands abstract a proton from EG to generate EG- and provide a proton to produce the bis(hydroxyalkyl)terephthalate (BHET) product. The rate-determining step is the nucleophilic attack step, where the Gibbs energy barriers (ΔG≠) increase in the order of 29.7 kcal mol-1 (HTBD-OAc) < 30.2 kcal mol-1 (HTBD-CH3CH2COO) < 31.4 kcal mol-1 (HTBD-HCOO) < 35.7 kcal mol-1 (HTBD-CH3COCOO) < 36.9 kcal mol-1 (HTBD-NO3). This is confirmed from the experimental results that the BHET yields decrease in the order of 84.8% (HTBD-OAc) > 82.4% (HTBD-CH3CH2COO) > 80.2% (HTBD-HCOO) > 73.6% (HTBD-CH3COCOO) > 4.7% (HTBD-NO3). These findings offer valuable guidance for designing more efficient metal-free protic ionic salts, promoting sustainable PET recycling.

Assessment of Four Engineered PET Degrading Enzymes Considering Large-Scale Industrial Applications

In recent years, enzymatic recycling of the widely used polyester polyethylene terephthalate (PET) has become a complementary solution to current thermomechanical recycling for colored, opaque, and mixed PET. A large set of promising hydrolases that depolymerize PET have been found and enhanced by worldwide initiatives using various methods of protein engineering. Despite the achievements made in these works, it remains difficult to compare enzymes' performance and their applicability to large-scale reactions due to a lack of homogeneity between the experimental protocols used. Here, we pave the way for a standardized enzymatic PET hydrolysis protocol using reaction conditions relevant for larger scale hydrolysis and apply these parameters to four recently reported PET hydrolases (LCCICCG, FAST-PETase, HotPETase, and PES-H1L92F/Q94Y). We show that FAST-PETase and HotPETase have intrinsic limitations that may not permit their application on larger reaction scales, mainly due to their relatively low depolymerization rates. With 80% PET depolymerization, PES-H1L92F/Q94Y may be a suitable candidate for industrial reaction scales upon further rounds of enzyme evolution. LCCICCG outperforms the other enzymes, converting 98% of PET into the monomeric products terephthalic acid (TPA) and ethylene glycol (EG) in 24 h. In addition, we optimized the reaction conditions of LCCICCG toward economic viability, reducing the required amount of enzyme by a factor of 3 and the temperature of the reaction from 72 to 68 °C. We anticipate our findings to advance enzymatic PET hydrolysis toward a coherent assessment of the enzymes and materialize feasibility at larger reaction scales.

On the Role of Temperature in the Depolymerization of PET by FAST-PETase: An Atomistic Point of View on Possible Active Site Pre-Organization and Substrate-Destabilization Effects

Enzyme FAST-PETase, recently obtained by a machine learning approach, can depolymerize poly(ethylene terephthalate) (PET), a synthetic resin employed in plastics and in clothing fibers. Therefore it represents a promising solution for the recycling of PET-based materials. In this study, a model of PET was adopted to describe the substrate, and all-atoms classical molecular dynamics (MD) simulations on apo- and substrate-bound FAST-PETase were carried out at 30 and 50 °C to provide atomistic details on the binding step of the catalytic cycle. Comparative analysis shed light on the interactions occurring between the FAST-PETase and 4PET at 50 °C, the optimal working conditions of the enzyme. Pre-organization of the enzyme active and binding sites has been highlighted, while MD simulations of FAST-PETase:4PET pointed out the occurrence of solvent-inaccessible conformations of the substrate promoted by the enzyme. Indeed, neither of these conformations was observed during MD simulations of the substrate alone in solution performed at 30, 50 and 150 °C. The analysis led us to propose that, at 50 °C, the FAST-PETase is pre-organized to bind the PET and that the interactions occurring in the binding site can promote a more reactive conformation of PET substrate, thus enhancing the catalytic activity of the enzyme.

Bacterial Population Changes during the Degradation Process of a Lactate (LA)-Enriched Biodegradable Polymer in River Water: LA-Cluster Preferable Bacterial Consortium

The lactate-based polyester poly[lactate (LA)-co-3-hydroxybutyrate (3HB)], termed LAHB, is a highly transparent and flexible bio-based polymeric material. There are many unknowns regarding its degradation process in riverine environments, especially the changes in bacterial flora that might result from its degradation and the identities of any LAHB-degrading bacteria. LAHB were immersed in the river water samples (A and B), and LAHB degradation was observed in terms of the weight change of the polymer and the microscopic changes on the polymer surfaces. A metagenomic analysis of microorganisms was conducted to determine the effect of LAHB degradation on the aquatic environment. The bacterial flora obtained from beta diversity analysis differed between the two river samples. The river A water sample showed the simultaneous degradation of LA and 3HB even though the copolymer was LA-enriched, suggesting preferable hydrolysis of the LA-enriched segments. In contrast, only 3HB degraded for the LAHB in the river B water sample. The linear discriminant analysis effect size (LEfSe) analysis revealed 14 bacteria that were significantly increased in the river A water sample during LAHB degradation, suggesting that these bacteria preferentially degraded and assimilated LA-clustering polymers. Our metagenomic analysis provides useful insights into the dynamic changes in microbial communities and LA-clustering polymer-degrading bacteria.

Transdisciplinary pragmatic melioration for the plastic life cycle: Why the social, natural, and technical sciences should prioritize reducing harm

Plastics underpin modern society but also threaten to choke it. Only 9 % of all plastic waste is recycled, usually with loss of quality ("downcycling"); the rest is landfilled or dumped (79 %) or incinerated (12 %). Put bluntly, the "plastic age" needs a "sustainable plastic culture." Consequently, we urgently need to develop a global and transdisciplinary approach not only to fully recycle plastics but also to manage the harms across their life cycle. The past decade has witnessed an explosion in research on new technologies and interventions that purport to help solve the plastic waste challenge; however, this work has, in most cases, been carried forward within single disciplines (for example, researching novel chemical and bio-based technologies for plastic degradation, engineering processing equipment innovations, and mapping recycling behaviours). In particular, although there has been vast progress within individual scientific fields, such work does not address the complexities of various plastic types and waste management systems. Meanwhile, research on the social contexts (and constraints) of plastic use and disposal is rarely in conversation with the sciences to drive innovation. In short, research on plastics typically lacks a transdisciplinary perspective. In this review, we urge the adoption of a transdisciplinary approach that focuses on pragmatic melioration; such an approach combines the natural and technical sciences with the social sciences to focus on the mitigation of harms across the plastic life cycle. To illustrate our case, we review the status of plastic recycling from these three scientific perspectives. Based on this, we advocate 1) foundational studies to identify sources of harm and 2) global/local interventions aimed at those plastics and aspects of the plastic life cycle that cause maximal harm, both in terms of planetary welfare and social justice. We believe this approach to plastic stewardship can be a showcase for tackling other environmental challenges.

Enzymatic polyethylene biorecycling: Confronting challenges and shaping the future

Polyethylene (PE) is a widely used plastic known for its resistance to biodegradation, posing a significant environmental challenge. Recent advances have shed light on microorganisms and insects capable of breaking down PE and identified potential PE-degrading enzymes (PEases), hinting at the possibility of PE biorecycling. Research on enzymatic PE degradation is still in its early stages, especially compared to the progress made with polyethylene terephthalate (PET). While PET hydrolases have been extensively studied and engineered for improved performance, even the products of PEases remain mostly undefined. This Perspective analyzes the current state of enzymatic PE degradation research, highlighting obstacles in the search for bona fide PEases and suggesting areas for future exploration. A critical challenge impeding progress in this field stems from the inert nature of the C-C and C-H bonds of PE. Furthermore, breaking down PE into small molecules using only one monofunctional enzyme is theoretically impossible. Overcoming these obstacles requires identifying enzymatic pathways, which can be facilitated using emerging technologies like omics, structure-based design, and computer-assisted engineering of enzymes. Understanding the mechanisms underlying PE enzymatic biodegradation is crucial for research progress and for identifying potential solutions to the global plastic pollution crisis.

Biotechnological Plastic Degradation and Valorization Using Systems Metabolic Engineering

Various kinds of plastics have been developed over the past century, vastly improving the quality of life. However, the indiscriminate production and irresponsible management of plastics have led to the accumulation of plastic waste, emerging as a pressing environmental concern. To establish a clean and sustainable plastic economy, plastic recycling becomes imperative to mitigate resource depletion and replace non-eco-friendly processes, such as incineration. Although chemical and mechanical recycling technologies exist, the prevalence of composite plastics in product manufacturing complicates recycling efforts. In recent years, the biodegradation of plastics using enzymes and microorganisms has been reported, opening a new possibility for biotechnological plastic degradation and bio-upcycling. This review provides an overview of microbial strains capable of degrading various plastics, highlighting key enzymes and their role. In addition, recent advances in plastic waste valorization technology based on systems metabolic engineering are explored in detail. Finally, future perspectives on systems metabolic engineering strategies to develop a circular plastic bioeconomy are discussed.

Energy-saving and product-oriented hydrogen peroxide electrosynthesis enabled by electrochemistry pairing and product engineering

Hydrogen peroxide (H2O2) electrosynthesis through oxygen reduction reaction (ORR) is drawing worldwide attention, whereas suffering seriously from the sluggish oxygen evolution reaction (OER) and the difficult extraction of thermodynamically unstable H2O2. Herein, we present an electrosynthesis protocol involving coupling ORR-to-H2O2 with waste polyethylene terephthalate (PET) upcycling and the first H2O2 conversion strategy. Ni-Mn bimetal- and onion carbon-based catalysts are designed to catalyze ORR-to-H2O2 and ethylene glycol electrooxidation with the Faradaic efficiency of 97.5% (H2O2) and 93.0% (formate). This electrolysis system runs successfully at only 0.927 V to achieve an industrial-scale current density of 400 mA cm-2, surpassing all reported H2O2 electrosynthesis systems. H2O2 product is upgraded through two downstream routes of converting H2O2 into sodium perborate and dibenzoyl peroxide. Techno-economic evolution highlights the high gross profit of the ORR || PET upcycling protocol over HER || PET upcycling and ORR || OER. This work provides an energy-saving methodology for the electrosynthesis of H2O2 and other chemicals.

Directed Evolution of Material Binding Peptide for Polylactic Acid-specific Degradation in Mixed Plastic Wastes

In order to preserve our livelihood for future generations, responsible use of plastics in a climate-neutral and circular economy has to be developed so that plastics can be used in an environmentally friendly way by future generations. The prerequisite is that bioplastic polymers such as polylactic acid (PLA) can be efficiently recycled from petrochemical based plastic. Here, a concept in which accelerated PLA degradation in the mixed suspension of PLA and polystyrene (PS) nanoparticles has been achieved through an engineered material binding peptide. After comparison of twenty material binding peptides, Cg-Def is selected due to its PLA binding specificity. Finally, a suitable high-throughput screening system is developed for enhancing material-specific binding toward PLA in presence of PS. Through KnowVolution campaign, a variant Cg-Def YH (L9Y/S19H) with 2.0-fold improved PLA binding specificity compared to PS is generated. Contact angle and surface plasmon resonance measurements validated higher surface coverage of Cg-Def YH on PLA surface and the fusion of Cg-Def YH with PLA degrading enzyme confirmed the accelerated PLA depolymerization (two times higher than only enzyme) in mixed PLA/PS plastics.

Microplastics in cultivated soil environment: Construction of toxicity grading evaluation system, development of priority control checklist, and toxicity mechanism analysis

The present study aimed to comprehensively evaluate the toxicological effects of microplastics (MPs) on cultivated soil quality. Based on improved G1 evaluation method, we first constructed a grading evaluation system comprising of the indicators of toxicological effects of cultivated soil quality under MPs exposure, while focusing on types of MPs that had significant/non-significant toxicity effects. Furthermore, we verified reliability of screening results of significance-links at each level, using several data processing methods. Then, using natural breakpoint classification method, a priority control checklist of toxicological effects of 18 types of MPs on cultivated soil was developed to determine the types of MPs having significant toxicity risks and cultivated soil quality links significantly affected by the toxicity of MPs exposure. Finally, quantum-mechanics/molecular-mechanics (QM/MM) methods were used to carry out the differential toxicity mechanism analysis. The results showed that MPs with higher non-polar surface area may lead to stronger toxicity effect to the cultivated soil quality. Notably, the MPs that have abundant binding sites enhance the binding affinity, and less polar MPs bind more strongly to the non-polar amino acids of target receptors. Our study provides a new theoretical perspective for multi-dimensional analysis toxicological effects of different MPs exposure on cultivated soil quality.

Three-directional engineering of IsPETase with enhanced protein yield, activity, and durability

The mesophilic PETase from Ideonella sakaiensis (IsPETase) has been shown to exhibit high PET hydrolysis activity, but its low stability limits its industrial applications. Here, we developed a variant, Z1-PETase, with enhanced soluble protein yield and durability while maintaining or improving activity at lower temperatures. The selected Z1-PETase not only exhibited a 20-fold improvement in soluble protein yield compared to the previously engineered IsPETaseS121E/D186H/S242T/N246D (4p) variant, but also demonstrated a 30% increase in low-temperature activity at 40 °C, along with an 11 °C increase in its TmD value. The PET depolymerization test across a temperature range low to high (30-70 °C) confirmed that Z1-PETase exhibits high accessibility of mesophilic PET hydrolase and rapid depolymerizing rate at higher temperature in accordance with the thermal behaviors of polymer and enzyme. Additionally, structural interpretation indicated that the stabilization of specific active site loops in Z1-PETase contributes to enhanced thermostability without adversely impacting enzymatic activity. In a pH-stat bioreactor, Z1-PETase depolymerized > 90% of both transparent and colored post-consumer PET powders within 24 and 8 h at 40 °C and 55 °C, respectively, demonstrating that the utility of this IsPETase variant in the bio-recycling of PET.

Modulating biofilm can potentiate activity of novel plastic-degrading enzymes

Plastic pollution is an increasing global issue desperately requiring a solution. Only 9% of all plastic waste has been recycled, and whilst recycling gives a second life to plastic, it is costly and there are limited downstream uses of recycled plastic, therefore an alternative is urgently needed. Biodegradation of plastic by microorganisms is a developing field of interest with the potential for bioreactors to be used alongside recycling to degrade plastic that may otherwise be sent to landfill. Here, we have identified two novel polyethylene terephthalate (PET) degrading enzymes through genomic mining and characterised their activity, including their ability to degrade PET. One of the main roadblocks facing the development of microbial enzymes as a plastic biodegradation solution, is that their efficiency is too low to facilitate development as bioremediation tools. In an innovative approach to tackle this roadblock, we hypothesised that enhancing a bacteria's ability to attach to and form a biofilm on plastic could maximise the local concentration of the enzyme around the target substrate, therefore increasing the overall rate of plastic degradation. We found that increasing biofilm levels, by manipulating the levels of the second messenger, Cyclic-di-GMP, led to increased levels of polyester degradation in cells expressing novel and well characterised polyester-degrading enzymes. This indicates that modulating biofilm formation is a viable mechanism to fast track the development of bacterial plastic bioremediation solutions.

Recent advances in the biodegradation of polyethylene terephthalate with cutinase-like enzymes

Polyethylene terephthalate (PET) is a synthetic polymer in the polyester family. It is widely found in objects used daily, including packaging materials (such as bottles and containers), textiles (such as fibers), and even in the automotive and electronics industries. PET is known for its excellent mechanical properties, chemical resistance, and transparency. However, these features (e.g., high hydrophobicity and high molecular weight) also make PET highly resistant to degradation by wild-type microorganisms or physicochemical methods in nature, contributing to the accumulation of plastic waste in the environment. Therefore, accelerated PET recycling is becoming increasingly urgent to address the global environmental problem caused by plastic wastes and prevent plastic pollution. In addition to traditional physical cycling (e.g., pyrolysis, gasification) and chemical cycling (e.g., chemical depolymerization), biodegradation can be used, which involves breaking down organic materials into simpler compounds by microorganisms or PET-degrading enzymes. Lipases and cutinases are the two classes of enzymes that have been studied extensively for this purpose. Biodegradation of PET is an attractive approach for managing PET waste, as it can help reduce environmental pollution and promote a circular economy. During the past few years, great advances have been accomplished in PET biodegradation. In this review, current knowledge on cutinase-like PET hydrolases (such as TfCut2, Cut190, HiC, and LCC) was described in detail, including the structures, ligand-protein interactions, and rational protein engineering for improved PET-degrading performance. In particular, applications of the engineered catalysts were highlighted, such as improving the PET hydrolytic activity by constructing fusion proteins. The review is expected to provide novel insights for the biodegradation of complex polymers.

A microbial evolutionary approach for a sustainable future

With the continued population increase, more sustainable use of water, land, air and chemicals is imperative. Microorganisms will need to be called upon to aid in many sustainability efforts. Prokaryotes are the fastest-evolving cellular life, and most manipulatable via synthetic biology. Moreover, their natural diversity in processing organic and inorganic chemicals, and their survivability in extreme niches, make them prime agents to enlist for solving many of society's pressing problems.

Engineering microbial division of labor for plastic upcycling

Plastic pollution is rapidly increasing worldwide, causing adverse impacts on the environment, wildlife and human health. One tempting solution to this crisis is upcycling plastics into products with engineered microorganisms; however, this remains challenging due to complexity in conversion. Here we present a synthetic microbial consortium that efficiently degrades polyethylene terephthalate hydrolysate and subsequently produces desired chemicals through division of labor. The consortium involves two Pseudomonas putida strains, specializing in terephthalic acid and ethylene glycol utilization respectively, to achieve complete substrate assimilation. Compared with its monoculture counterpart, the consortium exhibits reduced catabolic crosstalk and faster deconstruction, particularly when substrate concentrations are high or crude hydrolysate is used. It also outperforms monoculture when polyhydroxyalkanoates serves as a target product and confers flexible tuning through population modulation for cis-cis muconate synthesis. This work demonstrates engineered consortia as a promising, effective platform that may facilitate polymer upcycling and environmental sustainability.

A metagenomic catalog for exploring the plastizymes landscape covering taxa, genes, and proteins

There are significant environmental and health concerns associated with the current inefficient plastic recycling process. This study presents the first integrated reference catalog of plastic-contaminated environments obtained using an insilico workflow that could play a significant role in discovering new plastizymes. Here, we combined 66 whole metagenomic data from plastic-contaminated environment samples from four previously collected metagenome data with our new sample. In this study, an integrated plastic-contaminated environment gene, protein, taxa, and plastic degrading enzyme catalog (PDEC) was constructed. These catalogs contain 53,300,583 non-redundant genes and proteins, 691 metagenome-assembled genomes, and 136,654 plastizymes. Based on KEGG and eggNOG annotations, 42% of recognized genes lack annotations, indicating their functions remain elusive and warrant further investigation. Additionally, the PDEC catalog highlights hydrolases, peroxidases, and cutinases as the prevailing plastizymes. Ultimately, following multiple validation procedures, our effort focused on pinpointing enzymes that exhibited the highest similarity to the introduced plastizymes in terms of both sequence and three-dimensional structural aspects. This encompassed evaluating the linear composition of constituent units as well as the complex spatial conformation of the molecule. The resulting catalog is expected to improve the resolution of future multi-omics studies, providing new insights into plastic-pollution related research.

Fast Depolymerization of PET Bottle Mediated by Microwave Pre-Treatment and An Engineered PETase

Recycling plastics is the key to reaching a sustainable materials economy. Biocatalytic degradation of plastics shows great promise by allowing selective depolymerization of man-made materials into constituent building blocks under mild aqueous conditions. However, insoluble plastics have polymer chains that can reside in different conformations and show compact secondary structures that offer low accessibility for initiating the depolymerization reaction by enzymes. In this work, we overcome these shortcomings by microwave irradiation as a pre-treatment process to deliver powders of polyethylene terephthalate (PET) particles suitable for subsequent biotechnology-assisted plastic degradation by previously generated engineered enzymes. An optimized microwave step resulted in 1400 times higher integral of released terephthalic acid (TPA) from high-performance liquid chromatography (HPLC), compared to original untreated PET bottle. Biocatalytic plastic hydrolysis of substrates originating from PET bottles responded to 78 % yield conversion from 2 h microwave pretreatment and 1 h enzymatic reaction at 30 °C. The increase in activity stems from enhanced substrate accessibility from the microwave step, followed by the administration of designer enzymes capable of accommodating oligomers and shorter chains released in a productive conformation.

Plastic degradation by insect hexamerins: Near-atomic resolution structures of the polyethylene-degrading proteins from the wax worm saliva

Plastic waste management is a pressing ecological, social, and economic challenge. The saliva of the lepidopteran Galleria mellonella larvae is capable of oxidizing and depolymerizing polyethylene in hours at room temperature. Here, we analyze by cryo-electron microscopy (cryo-EM) G. mellonella's saliva directly from the native source. The three-dimensional reconstructions reveal that the buccal secretion is mainly composed of four hexamerins belonging to the hemocyanin/phenoloxidase family, renamed Demetra, Cibeles, Ceres, and a previously unidentified factor termed Cora. Functional assays show that this factor, as its counterparts Demetra and Ceres, is also able to oxidize and degrade polyethylene. The cryo-EM data and the x-ray analysis from purified fractions show that they self-assemble primarily into three macromolecular complexes with striking structural differences that likely modulate their activity. Overall, these results establish the ground to further explore the hexamerins' functionalities, their role in vivo, and their eventual biotechnological application.

Chemoenzymatic Photoreforming: A Sustainable Approach for Solar Fuel Generation from Plastic Feedstocks

Plastic upcycling through catalytic transformations is an attractive concept to valorize waste, but the clean and energy-efficient production of high-value products from plastics remains challenging. Here, we introduce chemoenzymatic photoreforming as a process coupling enzymatic pretreatment and solar-driven reforming of polyester plastics under mild temperatures and pH to produce clean H2 and value-added chemicals. Chemoenzymatic photoreforming demonstrates versatility in upcycling polyester films and nanoplastics to produce H2 at high yields reaching ∼103-104 μmol gsub-1 and activities at >500 μmol gcat-1 h-1. Enzyme-treated plastics were also used as electron donors for photocatalytic CO2-to-syngas conversion with a phosphonated cobalt bis(terpyridine) catalyst immobilized on TiO2 nanoparticles (TiO2|CotpyP). Finally, techno-economic analyses reveal that the chemoenzymatic photoreforming approach has the potential to drastically reduce H2 production costs to levels comparable to market prices of H2 produced from fossil fuels while maintaining low CO2-equivalent emissions.

Engineering Plastic Eating Enzymes Using Structural Biology

Plastic pollution has emerged as a significant environmental concern in recent years and has prompted the exploration of innovative biotechnological solutions to mitigate plastic's negative impact. The discovery of enzymes capable of degrading specific types of plastics holds promise as a potential solution. However, challenges with efficiency, industrial scalability, and the diverse range of the plastic waste in question, have hindered their widespread application. Structural biology provides valuable insights into the intricate interactions between enzymes and plastic materials at an atomic level, and a deeper understanding of their underlying mechanisms is essential to harness their potential to address the mounting plastic waste crisis. This review article examines the current biochemical and biophysical methods that may facilitate the development of enzymes capable of degrading polyethylene terephthalate (PET), one of the most extensively used plastics. It also discusses the challenges that must be addressed before substantial advancements can be achieved in using these enzymes as a solution to the plastic pollution problem.

Current advances in the structural biology and molecular engineering of PETase

Poly(ethylene terephthalate) (PET) is a highly useful synthetic polyester plastic that is widely used in daily life. However, the increase in postconsumer PET as plastic waste that is recalcitrant to biodegradation in landfills and the natural environment has raised worldwide concern. Currently, traditional PET recycling processes with thermomechanical or chemical methods also result in the deterioration of the mechanical properties of PET. Therefore, it is urgent to develop more efficient and green strategies to address this problem. Recently, a novel mesophilic PET-degrading enzyme (IsPETase) from Ideonella sakaiensis was found to streamline PET biodegradation at 30°C, albeit with a lower PET-degrading activity than chitinase or chitinase-like PET-degrading enzymes. Consequently, the molecular engineering of more efficient PETases is still required for further industrial applications. This review details current knowledge on IsPETase, MHETase, and IsPETase-like hydrolases, including the structures, ligand‒protein interactions, and rational protein engineering for improved PET-degrading performance. In particular, applications of the engineered catalysts are highlighted, including metabolic engineering of the cell factories, enzyme immobilization or cell surface display. The information is expected to provide novel insights for the biodegradation of complex polymers.

An archaeal lid-containing feruloyl esterase degrades polyethylene terephthalate

Polyethylene terephthalate (PET) is a commodity polymer known to globally contaminate marine and terrestrial environments. Today, around 80 bacterial and fungal PET-active enzymes (PETases) are known, originating from four bacterial and two fungal phyla. In contrast, no archaeal enzyme had been identified to degrade PET. Here we report on the structural and biochemical characterization of PET46 (RLI42440.1), an archaeal promiscuous feruloyl esterase exhibiting degradation activity on semi-crystalline PET powder comparable to IsPETase and LCC (wildtypes), and higher activity on bis-, and mono-(2-hydroxyethyl) terephthalate (BHET and MHET). The enzyme, found by a sequence-based metagenome search, is derived from a non-cultivated, deep-sea Candidatus Bathyarchaeota archaeon. Biochemical characterization demonstrated that PET46 is a promiscuous, heat-adapted hydrolase. Its crystal structure was solved at a resolution of 1.71 Å. It shares the core alpha/beta-hydrolase fold with bacterial PETases, but contains a unique lid common in feruloyl esterases, which is involved in substrate binding. Thus, our study widens the currently known diversity of PET-hydrolyzing enzymes, by demonstrating PET depolymerization by a plant cell wall-degrading esterase.