RETRACTED: The Effect of 600 keV Ag Ion Irradiation on the Structural, Optical, and Photovoltaic Properties of MAPbBr3 Films for Perovksite Solar Cell Applications

A competitive new technology, organic metallic halide perovskite solar cells feature a wide working area, low manufacturing costs, a long lifespan, and a significant amount of large efficacy of power conversion (PCE). The spin-coating technique was utilized for the fabrication of pure CH3NH3PbBr3 (MAPbBr3) thin films, and these films are implanted with 600 keV silver (Ag) ions at fluency rate of 6 × 1014 and 4 × 1014 ions/cm2. XRD analysis confirmed the cubic structure of MAPbBr3. A high grain size was observed at the fluency rate of 4 × 1014 ions/cm2. The UV-Vis spectroscopic technique was used to calculate the optical properties such as the bandgap energy (Eg), refractive index (n), extinction coefficients (k), and dielectric constant. A direct Eg of 2.44 eV was measured for the pristine film sample, whereas 2.32 and 2.36 eV were measured for Ag ion-implanted films with a 4 × 1014 and 6 × 1014 ions/cm2 fluence rate, respectively. The solar cells of these films were fabricated. The Jsc was 6.69 mA/cm2, FF was 0.80, Voc was 1.1 V, and the efficiency was 5.87% for the pristine MAPbBr3-based cell. All of these parameters were improved by Ag ion implantation. The maximum values were observed at a fluency rate of 4 × 1014 ions/cm2, where the Voc was 1.13 V, FF was 0.75, Jsc was 8.18 mA/cm2, and the efficiency was 7.01%.

Revealing Charge Transfer Dynamics in Methylammonium Lead Bromide Perovskites via Transient Photoluminescence Characterization

It is an important but difficult issue to identify charge and energy transfer processes in materials where multiple band gaps coexist. Conventional methods using transient absorption and optoelectrical characterization based on devices could not provide a clear picture of transfer dynamics. According to the bimolecular and monomolecular nature of each process, the carrier dynamics is supposed to solve this issue. In this work, we established a novel, convenient and universal strategy based on the calculation of carrier dynamics to distinguish energy/charge transfer and reveal their transfer dynamics in methylammonium lead bromide (MAPbBr₃) films with mixing wide-band gap small grains and narrow-band gap large grains. A highly efficient charge transfer process is confirmed with a high negative nonradiative bimolecular recombination coefficient of -2.12 × 10^-7 cm^-3 s^-1, indicating that free carriers within small grains are efficiently transferred from small grains to large grains. As a result, emission from large grains becomes dominant when increasing the photoexcitation intensity. In addition, current-density-dependent electroluminescence results in emission only from large grains, further verifying the charge transfer process. Moreover, it is interesting to find that when decreasing the size of small grains, the charge transfer process is facilitated, leading to an increased nonradiative bimolecular recombination coefficient from -2.12 × 10^-7 to -4.01 × 10^-7 cm^-3 s^-1 in large grains. Our work provides a convenient strategy to identify and quantify energy and charge transfer in metal halide perovskites, which can be used to enrich our understanding of perovskite photophysics.

Combinatorial Synthesis and Screening of Mixed Halide Perovskite Megalibraries

A significant bottleneck in the discovery of new mixed halide perovskite (MHP) compositions and structures is the time-consuming and low-throughput nature of current synthesis and screening methods. Here, a high-throughput strategy is presented that can be used to synthesize combinatorial libraries of MHPs with deliberate control over the halide mixing ratio and particle size (for example, CsPb(Br_1-xCl_x)₃ (0 < x < 1) with sizes between ∼100 and 400 nm). This strategy combines evaporation-crystallization polymer pen lithography (EC-PPL) and defect-engineered anion exchange to spatially encode particle size and composition, respectively. Laser exposure is used to selectively modify the defect concentration of individual particles, and thus the degree of subsequent anion exchange, allowing the preparation for ultra-high-density arrays of distinct compositions (>1 unique particle/μm²). This method was utilized to rapidly generate a library of ∼4000 CsPb(Br_1-xCl_x)₃ particles that was then screened for high-efficiency blue photoemission, which yielded CsPb(Br_0.6Cl_0.4)₃ as the composition with the highest photoluminescence intensity. The combinatorial synthesis and screening strategy provided here, and the mechanistic understanding of the defect-engineering process gleaned from it, will enable the rapid discovery of exceptional MHP optoelectronic materials.

Polarized Molecule 4-(Aminomethyl) Benzonitrile Hydrochloride for Efficient and Stable Perovskite Solar Cells

The rapid development of perovskite solar cells (PSCs) makes it one of the most competitive photovoltaic devices in the field of new energy. However, the suboptimal performance and poor stability caused by numerous defects are still the main factors limiting the development of PSCs. Herein, a polarized molecule additive of 4-(aminomethyl) benzonitrile hydrochloride (AMBNCl) is introduced into perovskite. Owing to its special polar electron density distribution, -C≡N group, -NH3+ terminal, and Cl- ions, the modification of AMBNCl can improve the quality of perovskite crystal growth, passivate the defects of Pb2+, adjust the energy level array between the perovskite layer and hole-transport layer, and alleviate the carrier nonradiative recombination. As a result, the AMBNCl-modified device achieves a champion efficiency of 23.52%. The unpacked device still maintained 91.2% of its original efficiency after storing in an air environment (RH ∼40%, 25 °C) for 50 days.

Halide perovskite single crystals: growth, characterization, and stability for optoelectronic applications

Recently, metal halide perovskite materials have received significant attention as promising candidates for optoelectronic applications with tremendous achievements, owing to their outstanding optoelectronic properties and facile solution-processed fabrication. However, the existence of a large number of grain boundaries in perovskite polycrystalline thin films causes ion migration, surface defects, and instability, which are detrimental to device applications. Compared with their polycrystalline counterparts, perovskite single crystals have been explored to realize stable and excellent properties such as a long diffusion length and low trap density. The development of growth techniques and physicochemical characterizations led to the widespread implementation of perovskite single-crystal structures in optoelectronic applications. In this review, recent progress in the growth techniques of perovskite single crystals, including advanced crystallization methods, is summarized. Additionally, their optoelectronic characterizations are elucidated along with a detailed analysis of their optical properties, carrier transport mechanisms, defect densities, surface morphologies, and stability issues. Furthermore, the promising applications of perovskite single crystals in solar cells, photodetectors, light-emitting diodes, lasers, and flexible devices are discussed. The development of suitable growth and characterization techniques contributes to the fundamental investigation of these materials and aids in the construction of highly efficient optoelectronic devices based on halide perovskite single crystals.

Diammonium-Mediated Perovskite Film Formation for High-Luminescence Red Perovskite Light-Emitting Diodes

3D mixed-halide perovskite-based red emitters combine excellent charge-transport characteristics with simple solution processing and good film formation; however, light-emitting diodes (LEDs) based on these emitters cannot yet outperform their nanocrystal counterparts. Here the use of diammonium halides in regulating the formation of mixed bromide-iodide perovskite films is explored. It is found that the diammonium cations preferentially bond to Pb-Br, rather than Pb-I, octahedra, promoting the formation of quasi-2D phases. It is proposed that the perovskite formation is initially dominated by the crystallization of the thermodynamically more favorable 3D phase, but, as the solution gets depleted from the regular A cations, thin shells of amorphous quasi-2D perovskites form. This leads to crystalline perovskite grains with efficiently passivated surfaces and reduced lattice strain. As a result, the diammonium-treated perovskite LEDs demonstrate a record luminance (10745 cd m^-2 ) and half-lifetime among 3D perovskite-based red LEDs.

Improving the Stability and Efficiency of Perovskite Solar Cells by a Bidentate Anilinium Salt

We report improvement in the perovskite solar cell efficiency and stability after passivation with an organic molecule decorated with two anilinium cations. We compare this salt with its neutral analog and found that the change in the electron density distribution upon protonation and the presence of the halide anion are key to explaining the better passivation ability of the salt. In addition, we show that the counteranion has a significant impact on the performance of the device.

Dynamics of broadband photoinduced species and enabled photodetection in MXenes

Dynamics of photoinduced species, as a key parameter for nanomaterials plays a significantly role in the performance of optoelectronic devices. In this work, the origin of broadband optical response for the emerging Ti3C2T x MXene is revealed by transient spectroscopic analysis. From ultraviolet to infrared, the steady-state and transient optical responses present wavelength-related features. The carrier lifetime is found to change from femtosecond to nanosecond time scale dominated by various photoinduced species, i.e., carrier and surface plasmon. The unique optoelectronic character enables photodetection. This fundamental study on carrier, plasmon dynamics, and application in photodetection is helpful for exploring MXene-based optoelectronic devices.

Stabilization and Self-Passivation of Grain Boundaries in Halide Perovskite by Rigid Body Translation

The physical properties of grain boundaries in halide perovskites, especially their atomic structure, have not been fully understood yet. We report that Σ5 [130] symmetrical tilt grain boundaries can be stabilized by rigid body translation which is moving one side of the grain parallel with respect to the adjacent grain. Such reconstruction passivates grain boundaries by removing Pb-Pb and I-I interactions that introduce shallow defect states in the band gap. Rigid body translation also stabilizes the [110] antiphase boundary as well in both CsPbI₃ and CsPbBr₃.

In Silico Investigation of the Impact of Hole-Transport Layers on the Performance of CH3NH3SnI3 Perovskite Photovoltaic Cells

Perovskite solar cells represent one of the recent success stories in photovoltaics. The device efficiency has been steadily increasing over the past years, but further work is needed to enhance the performance, for example, through the reduction of defects to prevent carrier recombination. SCAPS-1D simulations were performed to assess efficiency limits and identify approaches to decrease the impact of defects, through the selection of an optimal hole-transport material and a hole-collecting electrode. Particular attention was given to evaluation of the influence of bulk defects within light-absorbing CH3NH3SnI3 layers. In addition, the study demonstrates the influence of interface defects at the TiO2/CH3NH3SnI3 (IL1) and CH3NH3SnI3/HTL (IL2) interfaces across the similar range of defect densities. Finally, the optimal device architecture TiO2/CH3NH3SnI3/Cu2O is proposed for the given absorber layer using the readily available Cu2O hole-transporting material with PCE = 27.95%, FF = 84.05%, VOC = 1.02 V and JSC = 32.60 mA/cm2, providing optimal performance and enhanced resistance to defects.

Influences of dielectric constant and scan rate on hysteresis effect in perovskite solar cell with simulation and experimental analyses

In this work, perovskite solar cells (PSCs) with different transport layers were fabricated to understand the hysteresis phenomenon under a series of scan rates. The experimental results show that the hysteresis phenomenon would be affected by the dielectric constant of transport layers and scan rate significantly. To explain this, a modified Poisson and drift-diffusion solver coupled with a fully time-dependent ion migration model is developed to analyze how the ion migration affects the performance and hysteresis of PSCs. The modeling results show that the most crucial factor in the hysteresis behavior is the built-in electric field of the perovskite. The non-linear hysteresis curves are demonstrated under different scan rates, and the mechanism of the hysteresis behavior is explained. Additionally, other factors contributing to the degree of hysteresis are determined to be the degree of degradation in the perovskite material, the quality of the perovskite crystal, and the materials of the transport layer, which corresponds to the total ion density, carrier lifetime of perovskite, and the dielectric constant of the transport layer, respectively. Finally, it was found that the dielectric constant of the transport layer is a key factor affecting hysteresis in perovskite solar cells.

A route towards the fabrication of large-scale and high-quality perovskite films for optoelectronic devices

Halide perovskite materials have been extensively explored for their unique electrical, optical, magnetic, and catalytic properties. Most notably, solar cells based on perovskite thin films have improved their power conversion efficiency from 3.8% to over 25% during the last 12 years. However, it is still a challenge to develop a perovskite-based ink, suitable for upscaling the fabrication process of high-quality perovskite films with extreme purity, good crystallinity, and complete coverage over the deposition area. This is particularly important if the perovskite films are to be used for the scaled production of optoelectronic devices. Therefore, to make halide perovskites commercially available for various applications, it is vital to develop a reliable and highly robust deposition method, which can then be transferred to industry. Herein, the development of perovskite precursor inks suitable for use at low-temperature and vacuum-free solution-based deposition processes is reported. These inks can be further tailored according to the requirements of the deposition method, i.e., we propose their use with the industrially viable deposition technique called "slot-die coating". Furthermore, a route for the preparation of low-cost and high-volume manufacturing of perovskite films on both rigid and flexible substrates is suggested in this paper. The presented approach is suitable for the fabrication of any functional layers of perovskites, that can be employed in various scaled applications, and it seeks the potential and the methodology for perovskite film deposition that is scalable to industrial standards.

In Situ Growth Mechanism for High-Quality Hybrid Perovskite Single-Crystal Thin Films with High Area to Thickness Ratio: Looking for the Sweet Spot

The development of in situ growth methods for the fabrication of high-quality perovskite single-crystal thin films (SCTFs) directly on hole-transport layers (HTLs) to boost the performance of optoelectronic devices is critically important. However, the fabrication of large-area high-quality SCTFs with thin thickness still remains a significant challenge due to the elusive growth mechanism of this process. In this work, the influence of three key factors on in situ growth of high-quality large-size MAPbBr₃ SCTFs on HTLs is investigated. An optimal "sweet spot" is determined: low interface energy between the precursor solution and substrate, a slow heating rate, and a moderate precursor solution concentration. As a result, the as-obtained perovskite SCTFs with a thickness of 540 nm achieve a record area to thickness ratio of 1.94 × 10⁴  mm, a record X-ray diffraction peak full width at half maximum of 0.017°, and an ultralong carrier lifetime of 1552 ns. These characteristics enable the as-obtained perovskite SCTFs to exhibit a record carrier mobility of 141 cm² V^-1 s^-1 and good long-term structural stability over 360 days.

Modeling analysis of the growth of a cubic crystal in a finite space

The applications of semiconductor nanocrystals in optoelectronics are based on the unique characteristic of quantum confinement. There is great interest to tailor the performance of optoelectronic nanodevices and systems through the control of the sizes of nanocrystals. In this work, we develop a general mathematical formulation for the growth of a crystal/particle in a liquid solution, which takes account of the combinational effect of diffusion-limited growth and reaction-limited growth, and formulate the growth equations for the size of a cubic crystal grown under three different scenarios - isothermal and isochoric conditions, isothermal growth with the evaporation and/or extraction of the solvent and isochoric growth with continuous change in temperature. For the growth of a cubic crystal under isothermal and isochoric conditions, there are three growth stages - linear growth, nonlinear growth and plateau, and the growth rate in the stage of linear growth and the final size of the cubic crystal are dependent on the degree of supersaturation. For the growth of multi-crystals with a Gaussian distribution of crystal sizes, the change of the monomer concentration in a liquid solution is dependent on the change rates of average size and the standard deviation of the crystal sizes.

Differentiated Functions of Potassium Interface Passivation and Doping on Charge-Carrier Dynamics in Perovskite Solar Cells

The inclusion of potassium in perovskite solar cells (PSCs) has been widely demonstrated to enhance the power conversion efficiency and eliminate the hysteresis effect. However, the effects of the locations K⁺ cations on the charge-carrier dynamics remain unknown with respect to achieving a more delicate passivation design for perovskite interfaces and bulk films. Herein, we employ the combined electrical and ultrafast dynamics analysis for the perovskite film to distinguish the effects of bulk doping and interfacial passivation of the potassium cation. Transient absorption spectroscopy indicates an enhancement of charge-carrier diffusion for K⁺-doped PSCs (from 808 to 605 ps), and charge-carrier transfer is significantly promoted by K⁺ interface passivation (from 12.34 to 1.23 ps) compared with that of the pristine sample. Importantly, K⁺ doping can suppress the formation of wide bandgap perovskite phases (e.g., FAPbI_0.6Br_2.4 and FAPbI_1.05Br_1.95) that generate an energy barrier on the charge-carrier transport channel.

High-Performance Planar-Type Photodetector Based on Hot-Pressed CsPbBr3 Wafer

Considering the disadvantages of the common methods for CsPbBr₃ single crystal growth including the high cost of the melt method and the low shape controllability of the solution method, a facile hot-pressed (HP) approach has been introduced to prepare CsPbBr₃ wafers. The effects of HP temperature on the phase purity of HP-CsPbBr₃ wafers and the performance of the corresponding photodetectors have been investigated. The HP temperature for preparing phase-pure, shape-regular, and dense CsPbBr₃ wafers has been optimized to be 150 °C, and the HP-CsPbBr₃ wafer based planar-type photodetectors exhibit an ultrasensitive weak light photoresponse. Under the illumination of a 530 nm LED with a light power density of 1.1 μW cm^-2, the responsivity, external quantum efficiency, and detectivity of the devices reach 19.79 A W^-1, 4634%, and 2.14 × 10¹³ Jones, respectively, and a fast response speed with a rise time of 40.5 μs and a fall time of 10.0 μs has been achieved.

Realization of In-Plane Polarized Light Detection Based on Bulk Photovoltaic Effect in A Polar Van Der Waals Crystal

2D van der Waals materials are widely explored for in-plane polarized light detection owing to their distinctive in-plane anisotropic feature. However, most of these polarized light-sensitive devices root in their low symmetry of in-plane structure and work depending on external power sources, which greatly impedes the simplification of integrated devices and sustainable development. Bulk photovoltaic effect (BPVE), which separates photoexcited carriers via built-in electric field without an external power source and shows an angle-dependence on light polarization, is promising for self-powered polarized light detection to break through the restriction of in-plane anisotropy. Herein, a 2D lead-free van der Waals perovskite (Cl-PMA)₂ CsAgBiBr₇ (1, Cl-PMA = 4-Chlorobenzylamine) is successfully designed through the dimension reduction strategy. 1 exhibits BPVE with an open-circuited photovoltage up to ≈0.5 V. Driven by the BPVE, self-powered in-plane polarized light detection with a large polarization ratio of 1.3 is obtained for 1. As far as it is known, the first in-plane polarized light detection in hybrid perovskites based on BPVE is realized here. This work highlights the strategy of designing lead-free hybrid perovskite with BPVE and opens an avenue for exploiting in-plane highly sensitive polarized light detection in 2D van der Waals materials.

Self-Enhancement of Efficiency and Self-Attenuation of Hysteretic Behavior of Perovskite Solar Cells with Aging

Spontaneous enhancement of the photovoltaic performance of perovskite solar cells (PSCs) after aging has been reported, but the underlying reasons for such behavior are still under debate. Herein, we demonstrate that this spontaneous improvement effect accompanied by self-attenuation of hysteresis in the current-voltage characteristics is time- and temperature-dependent. Moreover, it is universal to PSCs based on a range of mixed-ion perovskites and coupled to different hole- and electron-transporting materials. Time-resolved confocal fluorescence microscopy and other characterization techniques suggest that the "self-healing" phenomenon is accompanied by the homogenization and enhancement of the charge extraction efficiency as well as suppressed recombination throughout cm²-scale perovskite layers. These dynamic effects need to be accounted for when assessing the initial and stabilized performance of PSCs.

Nonlocal Screening Dictates the Radiative Lifetimes of Excitations in Lead Halide Perovskites

We use path integral molecular dynamics simulations and theory to elucidate the interactions between charge carriers, as mediated by a lead halide perovskite lattice. We find that the charge-lattice coupling of MAPbI₃ results in a repulsive interaction between electrons and holes at intermediate distances. The effective interaction is understood using a Gaussian field theory, whereby the underlying soft, polar lattice contributes a nonlocal screening between quasiparticles. Path integral calculations of this nonlocal screening model are used to rationalize the small exciton binding energy and low radiative recombination rate observed experimentally and are compared to traditional Wannier-Mott and Fröhlich models, which fail to do so. These results clarify the origin of the high power conversion efficiencies in lead halide perovskites. Emergent repulsive electron-hole interactions provide a design principle for optimizing soft, polar semiconductors.

Polariton Dynamics in Two-Dimensional Ruddlesden-Popper Perovskites Strongly Coupled with Plasmonic Lattices

Strong coupling between light and matter can produce hybrid eigenstates known as exciton-polaritons. Although polariton dynamics are important photophysical properties, the relaxation pathways of polaritons in different coupling regimes have seen limited attention. This paper reports the dynamics of hybridized states from 2D Ruddlesden-Popper perovskites coupled to plasmonic nanoparticle lattices. The open cavity architecture of Al lattices enables the coupling strength to be modulated by varying either the lead halide perovskite film thickness or the superstrate refractive index. Both experiments and finite-difference time-domain simulations of the optical dispersion diagrams showed avoided crossings that are a signature of strong coupling. Our analytical model also elucidated the correlation between the exciton/plasmon mixing ratio and polariton coupling strength. Using fs-transient absorption spectroscopy, we found that both the upper and lower polaritons have shorter lifetimes than the excitons and that polaritons can show faster excited-state dynamics when they have access to additional energy transfer channels.

Pressure-Assisted Space-Confinement Strategy to Eliminate PbI2 in Perovskite Layers toward Improved Operational Stability

The existence of the PbI₂ phase in the perovskite film is normally inevitable because of the easy sublimation of the organic component during the crystallization process under a relatively high annealing temperature. However, excess PbI₂ will cause significant degradation on open current voltage (V_OC) and fill factor (FF) under continuous illumination. Here, we developed a pressure-assisted space-confinement (PASC) method to enhance the phase purity of the perovskite film fabricated by the two-step spin-coating method. It was found that high pressure is more conductive to lower the sublimation rate of the organic units, and the space confinement is more favorable for the Ostwald ripening. The combination of them can easily fabricate high-quality perovskite films with large crystal grains and eliminated PbI₂ remnants. As expected, the efficiency of the solar cell was improved from 20.38 to 22.26%; more importantly, the operational stability of the corresponding device had a pronounced improvement, which remains over 85% of its initial efficiency after 500 h maximum power point tracking measurement. Based on this PASC method, a prototype PSC module (PSM) with an active area of 14 cm² was also fabricated reaching an efficiency over 17%.

Deeper Insight into the Role of Organic Ammonium Cations in Reducing Surface Defects of the Perovskite Film

Organic ammonium salts (OASs) have been widely used to passivate perovskite defects. The passivation mechanism is usually attributed to coordination of OASs with unpaired lead or halide ions, yet ignoring their interaction with excess PbI₂ on the perovskite film. Herein, we demonstrate that OASs not only passivate defects by themselves, but also redistribute excess aggregated PbI₂ into a discontinuous layer, augmenting its passivation effect. Moreover, alkyl OAS is more powerful to disperse PbI₂ than a F-containing one, leading to better passivation and device efficiency because F atoms restrict the intercalation of OAS into PbI₂ layers. Inspired by this mechanism, exfoliated PbI₂ nanosheets are adopted to provide better dispersity of PbI₂ , further boosting the efficiency to 23.14 %. Our finding offers a distinctive understanding of the role of OASs in reducing perovskite defects, and a route to choosing an OAS passivator by considering substitution effects rather than by trial and error.

Hidden surface photovoltages revealed by pump probe KPFM

In this work, we use pump-probe Kelvin probe force microscopy (pp-KPFM) in combination with non-contact atomic force microscopy (nc-AFM) under ultrahigh vacuum, to investigate the nature of the light-induced surface potential dynamics in alumina-passivated crystalline silicon, and in an organic bulk heterojunction thin film based on the PTB7-PC₇₁BM tandem. In both cases, we demonstrate that it is possible to identify and separate the contributions of two different kinds of photo-induced charge distributions that give rise to potential shifts with opposite polarities, each characterized by different dynamics. The data acquired on the passivated crystalline silicon are shown to be fully consistent with the band-bending at the silicon-oxide interface, and with electron trapping processes in acceptors states and in the passivation layer. The full sequence of events that follow the electron-hole generation can be observed on the pp-KPFM curves, i.e. the carriers spatial separation and hole accumulation in the space charge area, the electron trapping, the electron-hole recombination, and finally the electron trap-release. Two dimensional dynamical maps of the organic blend photo-response are obtained by recording the pump-probe KPFM curves in data cube mode, and by implementing a specific batch processing protocol. Sample areas displaying an extra positive SPV component characterized by decay time-constants of a few tens of microseconds are thus revealed, and are tentatively attributed to specific interfaces formed between a polymer-enriched skin layer and recessed acceptor aggregates. Decay time constant images of the negative SPV component confirm that the acceptor clusters act as electron-trapping centres. Whatever the photovoltaic technology, our results exemplify how some of the SPV components may remain completely hidden to conventional SPV imaging by KPFM, with possible consequences in terms of photo-response misinterpretation. This work furthermore highlights the need of implementing time-resolved techniques that can provide a quantitative measurement of the time-resolved potential.

Short Photoluminescence Lifetimes Linked to Crystallite Dimensions, Connectivity, and Perovskite Crystal Phases

Time-correlated single photon counting has been conducted to gain further insights into the short photoluminescence lifetimes (nanosecond) of lead iodide perovskite (MAPbI₃) thin films (∼100 nm). We analyze three different morphologies, compact layer, isolated island, and connected large grain films, from 14 to 300 K using a laser excitation power of 370 nJ/cm². Lifetime fittings from the Generalized Berberan-Santos decay model range from 0.5 to 6.5 ns, pointing to quasi-direct bandgap emission despite the three different sample strains. The high energy band emission for the isolated-island morphology shows fast recombination rate centers up to 4.8 ns^-1, compared to the less than 2 ns^-1 for the other two morphologies, similar to that expected in a good quality single crystal of MAPbI₃. Low-temperature measurements on samples reflect a huge oscillator strength in this material where the free exciton recombination dominates, explaining the fast lifetimes, the low thermal excitation, and the thermal escape obtained.

Halide Segregation in Mixed Halide Perovskites: Visualization and Mechanisms

Photoinduced halide segregation in mixed halide perovskites is an intriguing phenomenon and simultaneously a stability issue. In-depth probing this effect and unveiling the underpinning mechanisms are of great interest and significance. This article reviews the progress in visualized investigation of halide segregation, especially light-induced, by means of spatially-resolved imaging techniques. Furthermore, the current understanding of photoinduced phase separation based on several possible mechanisms is summarized and discussed. Finally, the remained open questions and future outlook in this field are outlined.

Antiseptic Povidone-Iodine Heals the Grain Boundary of Perovskite Solar Cells

Povidone, also know as polyvinylpyrrolidone (PVP), is used as a reservoir for iodine, and the povidone-iodine (PVP-I) complex has antiseptic properties for wound healing by releasing iodine. In this report, we utilized this unique characteristic of PVP-I to heal the photovoltaic parameters of perovskite solar cells (PSCs). PVP-I was added in the perovskite precursor solution, where the effect of the PVP-I concentration on the photovoltaic performance was investigated. The power conversion efficiency (PCE) of PSC was enhanced from 20.73% to 22.59% by addition of 0.1 mg/mL PVP-I, mainly due to an improved fill factor from 0.76 to 0.80 together with a slight increase in current density. Scanning electron microscopy revealed that the grain boundaries were passivated by PVP-I. Conductive atomic force microscopy combined with time-resolved photoluminesence and space charge-limited current studies showed that the addition of PVP-I decreased the defect density of the perovskite film together and enhanced the film conductivity. Furthermore, better stability was observed from the PVP-I-treated PSCs than the control device without the additive, which is probably owing to the grain boundary healing effect.

Spatially resolved fluorescence of caesium lead halide perovskite supercrystals reveals quasi-atomic behavior of nanocrystals

We correlate spatially resolved fluorescence (-lifetime) measurements with X-ray nanodiffraction to reveal surface defects in supercrystals of self-assembled cesium lead halide perovskite nanocrystals and study their effect on the fluorescence properties. Upon comparison with density functional modeling, we show that a loss in structural coherence, an increasing atomic misalignment between adjacent nanocrystals, and growing compressive strain near the surface of the supercrystal are responsible for the observed fluorescence blueshift and decreased fluorescence lifetimes. Such surface defect-related optical properties extend the frequently assumed analogy between atoms and nanocrystals as so-called quasi-atoms. Our results emphasize the importance of minimizing strain during the self-assembly of perovskite nanocrystals into supercrystals for lighting application such as superfluorescent emitters.

Overcoming Nanoscale Inhomogeneities in Thin-Film Perovskites via Exceptional Post-annealing Grain Growth for Enhanced Photodetection

Antisolvent-assisted spin coating has been widely used for fabricating metal halide perovskite films with smooth and compact morphology. However, localized nanoscale inhomogeneities exist in these films owing to rapid crystallization, undermining their overall optoelectronic performance. Here, we show that by relaxing the requirement for film smoothness, outstanding film quality can be obtained simply through a post-annealing grain growth process without passivation agents. The morphological changes, driven by a vaporized methylammonium chloride (MACl)-dimethylformamide (DMF) solution, lead to comprehensive defect elimination. Our nanoscale characterization visualizes the local defective clusters in the as-deposited film and their elimination following treatment, which couples with the observation of emissive grain boundaries and excellent inter- and intragrain optoelectronic uniformity in the polycrystalline film. Overcoming these performance-limiting inhomogeneities results in the enhancement of the photoresponse to low-light (<0.1 mW cm^-2) illumination by up to 40-fold, yielding high-performance photodiodes with superior low-light detection.

Dual Passivation of Point Defects at Perovskite Grain Boundaries with Ammonium Salts Greatly Inhibits Nonradiative Charge Recombination

Experiments demonstrate that grain boundaries (GBs) exhibit detrimental effect on carrier lifetimes in MAPbI₃ (MA= CH₃NH₃⁺). On the basis of the nonadiabatic (NA) molecular dynamics simulations, we demonstrated that NH₄Cl can simultaneously passivate the common point defects that introduce recombination centers at GBs and accelerate electron-hole recombination but shows small effects in the bulk. The MA interstitial (MA_i) and the substitutional MA to Pb (MA_Pb) in pristine MAPbI₃ leave the band gap and charge recombination rates largely unchanged but create deep electron traps at GBs by separately either distorting inorganic octahedra or creating an I-dimer. Cl^- and NH₄⁺ remove the in-gap states by either restoring the distorted octahedra or destroying the I-dimer. Thus, the band gap recovers to the pristine system, NA coupling decreases, and decoherence accelerates, extending the carrier lifetime even twice longer than MAPbI₃. This study shows that the negative role of GBs can be removed by dually passivating with NH₄Cl.

All-Inorganic Perovskite Solar Cells with Tetrabutylammonium Acetate as the Buffer Layer between the SnO2 Electron Transport Film and CsPbI3

All-inorganic CsPbI₃ perovskites have great potential in tandem cells in combination with other photovoltaic devices. However, CsPbI₃ perovskite solar cells (PSCs) still face a huge challenge, resulting in a low power conversion efficiency (PCE) relative to organic-inorganic PSCs. In this work, we introduced tetrabutylammonium acetate (TBAAc) as a buffer layer between the SnO₂ electron-transport layer (ETL) and CsPbI₃ all-inorganic perovskite film interface for the first time. TBAAc not only improved the conductivity of SnO₂ ETL but also formed a 1D TBAPbI₃ layer between the SnO₂ ETL and the 3D CsPbI₃ all-inorganic perovskite film, thereby enhancing the stability and passivating the surface defects of the CsPbI₃ perovskite to fabricate high-efficiency carbon-counter electrode (CE)-based CsPbI₃ solar cells. We fabricated carbon-CE-based hole-transporting layer ( HTL)-free PSCs with an FTO/SnO₂/TBAAc/CsPbI₃/C structure. The open-circuit voltage (V_oc), short circuit current density (J_sc), PCE, and fill factor of the champion CsPbI₃ PSCs simultaneously enhanced to 1.08 V, 17.48 mA/cm², 12.79, and 67.8%, respectively. This PCE is currently one of the high efficiencies reported for the above planar-structured carbon-CE-based CsPbI₃ PSCs to date. Moreover, the optimized device exhibits excellent stability, which retained over 83% of its initial PCE after 350 h. This work provides a facile way of simultaneous optimization of the SnO₂ ETL and the CsPbI₃ perovskite layer to fabricate stable and high-efficiency carbon-CE-based CsPbI₃ PSCs.

Atomically Resolved Electrically Active Intragrain Interfaces in Perovskite Semiconductors

Deciphering the atomic and electronic structures of interfaces is key to developing state-of-the-art perovskite semiconductors. However, conventional characterization techniques have limited previous studies mainly to grain-boundary interfaces, whereas the intragrain-interface microstructures and their electronic properties have been much less revealed. Herein using scanning transmission electron microscopy, we resolved the atomic-scale structural information on three prototypical intragrain interfaces, unraveling intriguing features clearly different from those from previous observations based on standalone films or nanomaterial samples. These intragrain interfaces include composition boundaries formed by heterogeneous ion distribution, stacking faults resulted from wrongly stacked crystal planes, and symmetrical twinning boundaries. The atomic-scale imaging of these intragrain interfaces enables us to build unequivocal models for the ab initio calculation of electronic properties. Our results suggest that these structure interfaces are generally electronically benign, whereas their dynamic interaction with point defects can still evoke detrimental effects. This work paves the way toward a more complete fundamental understanding of the microscopic structure-property-performance relationship in metal halide perovskites.

Dependence of the Heterogeneity of Grain Boundaries on Adjacent Grains in Perovskites and Its Impact on Photovoltage

In polycrystalline perovskites, grain boundaries (GBs) that isolate grains determine the optoelectronic properties of a semiconductor, and hence affect the photovoltaic performance of a solar cell. Photocurrent and photovoltage are affected by the microscopic structure of perovskites but are difficult to quantify on the intragrain length scale and are often treated as homogeneous within the photoactive layer. Here, the nanoscale through-film and lateral photoresponse of large-grained perovskite are studied by photoconductive atomic force microscopy. Photocurrent collection along GBs relies on the formation of adjacent grains, exhibiting GB to GB heterogeneity. Regarding to the spatially correlated heterogeneity, the photovoltage of grains deduced from the photoresponse curves at specific positions is larger than that of GBs by up to 0.4 V, suggesting that the photovoltage loss mainly originates from the shunting of GBs through the whole perovskite layer. These spatial heterogeneities are alleviated by depositing a capping layer onto the perovskite layer, highlighting the role of the inserted layer between the perovskite and electrode in real solar cells. This research reveals the heterogeneity of GBs and its influence on photovoltage that actually occurs in virtual solar cells, which is crucial for optimizing perovskite-based solar cells.

Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells

3D perovskite solar cells (PSCs) have shown great promise for use in next-generation photovoltaic devices. However, some challenges need to be addressed before their commercial production, such as enormous defects formed on the surface, which result in severe SRH recombination, and inadequate material interplay between the composition, leading to thermal-, moisture-, and light-induced degradation. 2D perovskites, in which the organic layer functions as a protective barrier to block the erosion of moisture or ions, have recently emerged and attracted increasing attention because they exhibit significant robustness. Inspired by this, surface passivation by employing 2D perovskites deposited on the top of 3D counterparts has triggered a new wave of research to simultaneously achieve higher efficiency and stability. Herein, we exploited a vast amount of literature to comprehensively summarize the recent progress on 2D/3D heterostructure PSCs using surface passivation. The review begins with an introduction of the crystal structure, followed by the advantages of the combination of 2D and 3D perovskites. Then, the surface passivation strategies, optoelectronic properties, enhanced stability, and photovoltaic performance of 2D/3D PSCs are systematically discussed. Finally, the perspectives of passivation techniques using 2D perovskites to offer insight into further improved photovoltaic performance in the future are proposed.

Homologous Bromides Treatment for Improving the Open-Circuit Voltage of Perovskite Solar Cells

The power conversion efficiency (PCE) of solution-processed organic-inorganic mixed halide perovskite solar cells has achieved rapid improvement. However, it is imperative to minimize the voltage deficit (W_oc  = E_g /q - V_oc ) for their PCE to approach the theoretical limit. Herein, the strategy of depositing homologous bromide salts on the perovskite surface to achieve a surface and bulk passivation for the fabrication of solar cells with high open-circuit voltage is reported. Distinct from the conclusions given by previous works, that homologous bromides such as FABr only react with PbI₂ to form a large-bandgap perovskite layer on top of the original perovskite, this work shows that the bromide also penetrates the perovskite film and passivates the perovskite in the bulk. This is confirmed by the small-bandgap enlargement observed by absorbance and photoluminescence, and the bromide element ratio increasing in the bulk by time-of-flight secondary-ion mass spectrometry and depth-resolved X-ray photoelectron spectroscopy. Furthermore, a clear suppression of non-radiative recombination is confirmed by a variety of characterization methods. This work provides a simple and universal way to reduce the W_oc of single-junction perovskite solar cells and it will also shed light on developing other high-performance optoelectronic devices, including perovskite-based tandems and light-emitting diodes.

Nanoscale chemical heterogeneity dominates the optoelectronic response of alloyed perovskite solar cells

Halide perovskites perform remarkably in optoelectronic devices. However, this exceptional performance is striking given that perovskites exhibit deep charge-carrier traps and spatial compositional and structural heterogeneity, all of which should be detrimental to performance. Here, we resolve this long-standing paradox by providing a global visualization of the nanoscale chemical, structural and optoelectronic landscape in halide perovskite devices, made possible through the development of a new suite of correlative, multimodal microscopy measurements combining quantitative optical spectroscopic techniques and synchrotron nanoprobe measurements. We show that compositional disorder dominates the optoelectronic response over a weaker influence of nanoscale strain variations even of large magnitude. Nanoscale compositional gradients drive carrier funnelling onto local regions associated with low electronic disorder, drawing carrier recombination away from trap clusters associated with electronic disorder and leading to high local photoluminescence quantum efficiency. These measurements reveal a global picture of the competitive nanoscale landscape, which endows enhanced defect tolerance in devices through spatial chemical disorder that outcompetes both electronic and structural disorder.

Amino-Linked Conjugated Tetrazole Ring Passivation Strategy for Air-Processed Perovskite Cells with Predominant Stability and Efficiency

Perovskite solar cells (PSCs) develop rapidly with certified efficiency over 25.5 %, but there are remaining problems such as defects-induced recombination and degradation throughout the whole device. Functional organic small molecule passivation strategies are diverse and efficient, enhancing the efficiency and stability of PSCs. Here, 5-aminotetrazole (5ATZ) was introduced for the first time as an effective passivator, where -NH₂ and -NH as active sites interacted with the Pb and I related to vacancy defects in perovskites, anchoring defects and preventing further unavoidable ion migration and device degradation. Furthermore, the extensive π-electron delocalization around the tetrazole conjugated ring significantly promoted the charge transfer. Therefore, the 5ATZ-processed PSCs provided enhanced voltage and current, showed superior 19.75 % power conversion efficiency with excellent performance and improved stability, and demonstrated one of the best performances in all-air preparation to date. The simultaneous multi-effect passivation strategy of vacancy defects in perovskites will contribute to eliminate obstacles on the road to commercialization of PSCs.

Toward stable lead halide perovskite solar cells: A knob on the A/X sites components

Hybrid lead halide ABX3 perovskite solar cells (PSCs) have emerged as a strong competitor to the traditional solar cells with a certified power conversion efficiency beyond 25% and other remarkable features such as light weight, solution processability, and low manufacturing cost. Further development on the efficiency and stability brings forth increasing attention in the component regulation, such as partial or entire substitution of A/B/X sites by alternative elements with similar size. However, the relationships between composition, property, and performance are poorly understood. Here, the instability of PSCs from the photon-, moisture-, thermal-, and mechanical-induced degradation was first summarized and discussed. In addition, the component regulation from the A/X sites is highlighted from the aspects of band level alignment, charge-carrier dynamics, ion migration, crystallization behavior, residual strain, stoichiometry, and dimensionality control. Finally, the perspectives and future outlooks are highlighted to guide the rational design and practical application of PSCs.

Potassium Iodide Doping Strategy for High-Efficiency Perovskite Solar Cells Revealed by Ultrafast Spectroscopy

Organic-inorganic halide perovskites are promising materials for high-performance photovoltaics. The doping strategy is considered to be an effective method for regulating the performance of perovskite solar cells, yet its efficiency is still far below what has been anticipated. Here, we systematically investigate the regulatory mechanisms of the performance of perovskites by exploiting potassium iodide (KI) doping. We find that the surface states are passivated apart from the modified lattice structure. Most importantly, carrier recombination and transport are regulated by varying two different trap states when doping KI. The corresponding defect penalty can be effectively restrained at an optimal concentration of added KI (5%). A significant increase in the conductivity and radiative efficiency is achieved under such conditions. Our results provide fundamental insights into defect engineering through doping and a promising route toward highly efficient perovskite solar cells.

The Influence of CsBr on Crystal Orientation and Optoelectronic Properties of MAPbI3-Based Solar Cells

Crystal orientations are closely related to the behavior of photogenerated charge carriers and are vital for controlling the optoelectronic properties of perovskite solar cells. Herein, we propose a facile approach to reveal the effect of lattice plane orientation distribution on the charge carrier kinetics via constructing CsBr-doped mixed cation perovskite phases. With grazing-incidence wide-angle X-ray scattering measurements, we investigate the crystallographic properties of mixed perovskite films at the microscopic scale and reveal the effect of the extrinsic CsBr doping on the stacking behavior of the lattice planes. Combined with transient photocurrent, transient photovoltage, and space-charge-limited current measurements, the transport dynamics and recombination of the photogenerated charge carriers are characterized. It is demonstrated that CsBr compositional engineering can significantly affect the perovskite crystal structure in terms of the orientation distribution of crystal planes and passivation of trap-state densities, as well as simultaneously facilitate the photogenerated charge carrier transport across the absorber and its interfaces. This strategy provides unique insight into the underlying relationship between the stacking pattern of crystal planes, photogenerated charge carrier transport, and optoelectronic properties of solar cells.

Antiperovskite Electrolytes for Solid-State Batteries

Solid-state batteries have fascinated the research community over the past decade, largely due to their improved safety properties and potential for high-energy density. Searching for fast ion conductors with sufficient electrochemical and chemical stabilities is at the heart of solid-state battery research and applications. Recently, significant progress has been made in solid-state electrolyte development. Sulfide-, oxide-, and halide-based electrolytes have been able to achieve high ionic conductivities of more than 10^-3 S/cm at room temperature, which are comparable to liquid-based electrolytes. However, their stability toward Li metal anodes poses significant challenges for these electrolytes. The existence of non-Li cations that can be reduced by Li metal in these electrolytes hinders the application of Li anode and therefore poses an obstacle toward achieving high-energy density. The finding of antiperovskites as ionic conductors in recent years has demonstrated a new and exciting solution. These materials, mainly constructed from Li (or Na), O, and Cl (or Br), are lightweight and electrochemically stable toward metallic Li and possess promising ionic conductivity. Because of the structural flexibility and tunability, antiperovskite electrolytes are excellent candidates for solid-state battery applications, and researchers are still exploring the relationship between their structure and ion diffusion behavior. Herein, the recent progress of antiperovskites for solid-state batteries is reviewed, and the strategies to tune the ionic conductivity by structural manipulation are summarized. Major challenges and future directions are discussed to facilitate the development of antiperovskite-based solid-state batteries.

The Rational Control of Precursor Concentration in Perovskite Light-Emitting Diodes

Perovskite light-emitting diodes (PeLEDs) have attracted tremendous attention due to their ideal optoelectronic properties, such as high color purity, high fluorescence quantum yield, and tunable light color. The perovskite layer plays a decisive role in the performance of PeLEDs and the solvent engineering of the perovskite layer is the key technological breakthrough in preparing high quality films. In this study, we have proposed the strategy of adding different amounts of solvents to the perovskite precursor solution to optimize the morphology of perovskite films and device performance. As a result, with the decreasing concentration of perovskite precursor solution, the perovskite film morphology is smoother and more favorable for carrier injection and combing, which induces an enhanced external quantum efficiency. The maximum luminance of PeLEDs was increased from 1667 cd/m2 to 9857 cd/m2 and the maximum current efficiency was increased from 6.7 cd/A to 19 cd/A. This work provides a trend to achieve improved film morphology and device performance for perovskite optoelectronic devices.

Universal Existence of Localized Single-Photon Emitters in the Perovskite Film of All-Inorganic CsPbBr3 Microcrystals

All-inorganic halide perovskites have drawn a lot of research attention very recently owing to their potential solution to the instability issue currently faced by the organic-inorganic counterparts. Meanwhile, the halide perovskites in a solid film are manifested as microscale morphologies whose functionalities are unavoidably affected by the interior or exterior presence of various nanoscale entities. Here all-inorganic solid films are fabricated with varying densities of single CsPbBr₃ microcrystals, showing that very sharp photoluminescence peaks can be universally observed at 4 K with the linewidths being as narrow as hundreds of μeV. The single-photon emission nature is confirmed for such a photoluminescence peak, whose intensity is completely quenched above ≈30 K to suggest its possible origin from a low potential-energy region of the single microcrystal. The discovery of such a novel emitting species in halide perovskites, with the enriched structure-property relationship, will surely impart significant influences on the advancement of relevant optoelectronic devices and quantum-light sources.

Probing Longitudinal Carrier Transport in Perovskite Thin Films via Modified Transient Reflection Spectroscopy

Accurate characterization of the longitudinal (along the thickness direction) carrier transport property is of significant importance for evaluating the quality and performance of perovskite thin films. Herein, we report the development of a modified transient reflection (TR) spectroscopy method to realize the direct observation and determination of the longitudinal carrier transport process in MAPbI₃ polycrystalline thin films. Unlike the traditional TR spectroscopy, the carrier transport dynamics along the film thickness is resolved by making the pump (excitation) and probe beams spatially separated on each side of the film, so that the carrier transport from the excitation side to the probe side is directly captured. Utilizing this method, the longitudinal carrier diffusion coefficients (D) in various perovskite films with different thicknesses and grain sizes (extracted from SEM images) are determined, showing D values of ∼1.5 to 1.8 cm² s⁻¹ (∼0.5 to 0.8 cm² s⁻¹) for films with grain size larger (smaller) than the thickness. This empirical correlation between the longitudinal D and film thickness/grain size provides a reference for quick quality screening and evaluation of perovskite polycrystalline thin films.

A back-excitation transient reflection spectroscopy was developed to visualize longitudinal carrier transport in perovskite films, showing that the longitudinal diffusion coefficient decreases sharply with increasing thickness-to-grain-size ratio.

Microstructural Evaluation of Phase Instability in Large Bandgap Metal Halide Perovskites

The optoelectronic performance of organic-inorganic halide perovskite (OIHP)-based devices has been improved in recent years. Particularly, solar cells fabricated using mixed-cations and mixed-halides have outperformed their single-cation and single-halide counterparts. Yet, a systematic evaluation of the microstructural behavior of mixed perovskites is missing despite their known composition-dependent photoinstability. Here, we explore microstructural inhomogeneity in (FAPbI₃)_x(MAPbBr₃)_1-x using advanced scanning probe microscopy techniques. Contact potential difference (CPD) maps measured by Kelvin probe force microscopy show an increased fraction of grains exhibiting a low CPD with flat topography as MAPbBr₃ concentration is increased. The higher portion of low CPD contributes to asymmetric CPD distribution curves. Chemical analysis reveals these grains being rich in MA, Pb, and I. The composition-dependent phase segregation upon illumination, reflected on the emergence of a low-energy peak emission in the original photoluminescence spectra, arises from the formation of such grains with flat topology. Bias-dependent piezo-response force microscopy measurements, in these grains, further confirm vigorous ion migration and cause a hysteretic piezo-response. Our results, therefore, provide insights into the microstructural evaluation of phase segregation and ion migration in OIHPs pointing toward process optimization as a mean to further enhance their optoelectronic performance.

Enhanced Activation Energy Released by Coordination of Bifunctional Lewis Base d-Tryptophan for Highly Efficient and Stable Perovskite Solar Cells

Perovskite defect passivation with molecule doping shows great potential in boosting the efficiency and stability of perovskite solar cells (PSCs). Herein, an efficient and low-cost bifunctional Lewis base additive d-tryptophan is introduced to control the crystallization and growth of perovskite grains and passivation defects. It is found that the additive doped in the solution precursors could retard crystal growth by increasing activation energy, resulting in improved crystallization of large grains with reduced grain boundaries, as well as inhibiting ion migration and PbI₂ aggregation. As a result, the PSCs incorporated with d-tryptophan additives achieve an improved power conversion efficiency from 18.18 to 21.55%. Moreover, the d-tryptophan passivation agent improves the device stability, which retains 86.85% of its initial efficiency under ambient conditions at room temperature after 500 h. This work provides Lewis base small-molecule d-tryptophan for efficient defect passivation of the grain boundaries toward efficient and stable PSCs.