Limitations in bonding to dentin and experimental strategies to prevent bond degradation

Effect of tea root-derived proanthocyanidin fractions on protection of dentin collagen

Objectives

Proanthocyanidins (PAs) have been widely used as effective agents for dentin collagen cross-linking to enhance the biomechanics and biostability of dentin in vitro. However, the effects and protective mechanisms of various tea root-derived PA components on dentin remain undefined. This study evaluated the effects of these tea root-derived PA components on dentin biomechanics and biostability.

Methods

In this study, ethyl acetate and n-butyl alcohol were used to extract PAs with different degrees of polymerization from tea roots; the effects of these PA extracts on dentin were evaluated.

Results

Dentin was treated with glutaraldehyde, ethyl acetate, n-butyl alcohol, or water. PAs with a high degree of polymerization, extracted using n-butyl alcohol, were able to more effectively improve dentin collagen cross-linking, increase resistance to bacterial collagenase digestion, and enhance dentin elasticity, relative to treatment with glutaraldehyde or PAs with a low degree of polymerization (extracted using ethyl acetate). Additionally, treatment with aqueous extract of tea roots was detrimental to dentin stability and function.

Conclusions

PAs with a high degree of polymerization were effective for dentin protection and restoration in vitro, suggesting clinical treatment potential for tea root-derived PAs.

Effects of Bioactive Agents on Dentin Mineralization Kinetics After Dentin Bleaching

Objectives:

This study evaluated effects of Bioglass 45S5 (BG) and Biosilicate (BS) remineralization on the chemical composition and bond strength of control dentin (CD) and bleached dentin (BD) surfaces.

Methods and Materials:

Dentin bleaching treatment was performed using the walking bleaching technique with 0.01 g of sodium perborate and 0.5 mL of 3% hydrogen peroxide for 14 days. Remineralization treatment was carried out by rubbing a remineralization solution (0.015 g of BG or BS diluted in 1.35 mL of distilled water) on the etched dentin surface for 30 seconds. Micro-Raman spectroscopy (MRS) was used to quantitatively analyze the mineral matrix ratios of CD and BD (n=5) after remineralization treatment with BG and BS over 15 days of incubation in artificial saliva. The CD and BD discs (n=10) with and without remineralization treatment with BG and BS were restored using a two-step etch-and-rinse adhesive system (Optibond S, Kerr) and five layers of 1-mm-thick composite resin (Filtek Z250, 3M ESPE). The restored dentin discs were sectioned into nine bonded beams with cross-sectional areas of approximately 0.9 mm2 and tested for microtensile bond strength (μTBS). The dentin surface of one fractured beam per tooth was submitted to MRS to characterize the physicochemical composition (n=10) at the interface. The data were analyzed using one-way analysis of variance and the Tukey-Kramer post hoc test (p<0.005).

Results:

MRS bioactive analyses revealed that both BG and BS promoted increased mineral matrix ratios in the CD and BD. Significantly higher μTBS values were found after CD treatment with BG (CD: 57 MPa±11; CD-BG: 78 MPa±15) and when BG and BS were applied to the BD (BD: 42 MPa±5; BD-BG: 71 MPa±14; BD-BS: 64 MPa±11) (p<0.005). The MRS analysis of the fractured dentin beam showed that the remineralization treatment significantly increased the dentin relative mineral concentration and promoted the appearance of new interface peaks, indicating a chemical interaction (p<0.005).

Conclusion:

Remineralization of BD is an effective therapy to restore damage caused by dentin bleaching and acid conditioning. This approach not only increases dentin mineral compounds but also improves dentin's ability to interact chemically with the adhesive system.

Chlorhexidine-modified nanotubes and their effects on the polymerization and bonding performance of a dental adhesive

OBJECTIVES

The purpose of this study was to synthesize chlorhexidine (CHX)-encapsulated aluminosilicate clay nanotubes (Halloysite®, HNTs) and to incorporate them into the primer/adhesive components of an etch-and-rinse adhesive system (SBMP; Scotchbond Multipurpose, 3M ESPE) and to test their effects on degree of conversion, viscosity, immediate and long-term bonding to dentin.

METHODS

CHX-modified HNTs were synthesized using 10% or 20% CHX solutions. The primer and the adhesive components of SBMP were incorporated with 15wt.% of the CHX-encapsulated HNTs. Degree of conversion (DC) and viscosity analyses were performed to characterize the modified primers/adhesives. For bond strength testing, acid-etched dentin was treated with one of the following: SBMP (control); 0.2%CHX solution before SBMP; CHX-modified primers+SBMP adhesive; SBMP primer+CHX-modified adhesives; and SBMP primer+CHX-free HNT-modified adhesive. The microtensile bond strength test was performed after immediate (24h) and long-term (6 months) of water storage. Data were analyzed using ANOVA and Tukey (α=5%) and the Weibull analysis.

RESULTS

DC was greater for the CHX-free HNT-modified adhesive, whereas the other experimental adhesives showed similar DC as compared with the control. Primers were less viscous than the adhesives, without significant differences within the respective materials. At 24h, all groups showed similar bonding performance and structural reliability; whereas at the 6-month period, groups treated with the 0.2%CHX solution prior bonding or with the CHX-modified primers resulted in greater bond strength than the control and superior reliability.

SIGNIFICANCE

The modification of a primer or adhesive with CHX-encapsulated HNTs was an advantageous approach that did not impair the polymerization, viscosity and bonding performance of the materials, showing a promising long-term effect on resin-dentin bonds.

Bond assessment of resin modified glass ionomer cement to dentin conditioned with photosensitizers, laser and conventional regimes

AIM

To assess different conditioning regimes on shear bond strength (SBS) of resin modified glass ionomer cement (RMGIC) bonded to dentin MATERIAL AND METHODS: Fifty non carious intact maxillary molars were cleaned, isolated and randomly divided into five groups (n = 10). Before randomization, dentin surface was exposed and finished. Samples in group 1 were conditioned with methylene blue photosensitizer (MBP) 50 mg/l and activated by photodynamic therapy (PDT), Group 2: surface treated with Er,Cr:YSGG (ECL), Group 3: surface conditioned with polyacrylic acid (PAA) (control), Group 4: surface conditioned with 17 % Ethylenediaminetetraacetic acid (EDTA), Group 5: surface conditioned with total etch (Optibond solo Plus). For SBS testing the samples were placed in universal testing machine. Fracture analysis of debonded surfaces were evaluated using stereomicroscope at 40x magnification. Means and standard deviations were calculated using analysis of variance (ANOVA) and Tukey's post hoc test at a significance level of (p < 0.05).

RESULTS

The maximum bond strength was found in group 5 conditioned with Optibond solo plus total etch (23.15 ± 3.21 MPa). Whereas, the lowest bond values were observed in group 1 treated with MBP (15.25 ± 1.54 MPa). Moreover, samples in group 2, group 3 and group 4 resulted in comparable bond strength (p > 0.05).

CONCLUSION

MBP at 50 mg/l is not recommended to condition dentin prior to RMGIC application. Moreover, ECL has a potential to be suggested for dentin conditioning compared to PAA.

Effects of resveratrol/ethanol pretreatment on dentin bonding durability

To determine the effects of resveratrol/ethanol solution on the durability of resin-dentin bonding interfaces. Sixty-four non-caries third molars were randomly divided into four groups (n = 16) after sectioning, and then pretreated with one of the following concentrations of resveratrol/ethanol solutions: 0 (control group), 1, 10 and 20 mg/mL, followed by a universal adhesive and resin composites. All microtensile samples were divided into three subgroups: immediate group, collagenase ageing group and thermocycled group. The microtensile bond strength (MTBS), failure modes, interfacial nanoleakage and in situ zymography were measured, whereas the inhibitory effects of pretreated dentin slices on S. mutans biofilms were determined by confocal laser scanning microscopy and MTT assay. The results indicated that bonding strength was not only influenced by pretreatment factors (P < 0.05) but also ageing factors (P < 0.05). Regardless of collagenase ageing or thermocycling, the 10 mg/mL resveratrol/ethanol pretreatment group presented significantly higher (P < 0.05) MTBS and lower (P < 0.05) expression of nanoleakage than the control group, showed better inhibitory effect of matrix metalloproteinases and S. mutans activity with acceptable cytotoxicity. Meanwhile, cohesive failure in dentin decreased gradually with increasing resveratrol concentration. Therefore, the resveratrol/ethanol solution had the potential to serve as a versatile dentin primer, which can effectively improve dentin bonding durability and prevent secondary caries.

Secondary caries: what is it, and how it can be controlled, detected, and managed?

OBJECTIVES

To assess how to control, detect, and treat secondary caries. This review serves to inform a joint ORCA/EFCD consensus process.

METHODS

Systematic and non-systematic reviews were performed or consulted and narratively synthesized.

RESULTS

Secondary (or recurrent) caries is defined as a lesion associated with restorations or sealants. While the restorative material itself has some influence on secondary caries, further factors like the presence and size of restoration gaps, patients' caries risk, and the placing dentist's experience seem more relevant. Current detection methods for secondary caries are only sparsely validated and likely prone for the risk of over-detection. In many patients, it might be prudent to prioritize specific detection methods to avoid invasive overtreatment. Detected secondary caries can be managed either by repair of the defective part of the restoration or its complete replacement.

CONCLUSIONS

There is sparse data towards the nature of secondary caries and how to control, detect, and treat it.

CLINICAL SIGNIFICANCE

Despite often claimed to be a major complication of restorations, there is surprisingly little data on secondary caries. Longer-term studies may be needed to identify differences in secondary caries risk between materials and to identify characteristic features of progressive lesions (i.e., those in need of treatment).

Evaluation of a Collagen-Reactive Monomer with Advanced Bonding Durability

This study evaluated the use of a new collagen-reactive monomer (CRM), isocyanate-terminated urethane methacrylate precursor, which has covalent affinity to dental collagen, in the formation of dentin-resin bonds and compared it with 2 other dental adhesives. Dentin specimens were bonded with either the CRM-based adhesive (CBA), One-Step (OS; Bisco, Inc.), or a negative adhesive (NA) control and subjected to 24-h storage in water, thermocycling to simulate 1-y clinical function, or a matrix metalloproteinase-mediated aging process. We tested the microtensile bond strength (µTBS), characterized the bonding interface with an atomic force microscope, conducted micro-Raman analysis, and performed leakage tests and in situ zymography. CBA and OS exhibited comparable bonding strength after 24 h (P > 0.05); however, there was a sharp decrease in µTBS after aging for all except CBA (P < 0.001). Raman spectra results indicated increased collagen crosslinking and chemical reaction between the adhesive and collagen in the CBA group. CBA achieved high-quality hybridization with collagen, improving mechanical properties and integrity, and decreased the enzyme-mediated degradation of the bonding interface by inhibiting collagenolytic activity. With the promising bonding durability of coapplied CBA, CRM may be the first dental adhesive to provide strong and long-lasting resin-dental collagen bonding without the additional conditioning step. The use of CBA results in high-quality hybrid layers that protect the resin-dentin interface from harmful biological and chemical activities commonly occurring in the oral environment.

The Effect of Viscosity and Application Mode of Phosphoric Acid on Bond Strength of GlassFiber Post

Background

When a phosphoric acid is used, before applying an adhesive system, it is known that obtaining an effective adhesion to the root canal walls is a challenge. The aim of the present study was to evaluate the influence of phosphoric acid viscosity and application mode on the push-out bond strength (BS) values of fiberglass post to root dentin. The conditioning pattern on the root dentin was also evaluated.

Materials and Methods

The roots of 44 endodontically treated premolars were divided into 4 groups, of eleven teeth each, according to the combination of the main factors: phosphoric acid viscosity (liquid or gel) and application mode (passive or sonic). After application of the two-step etch-and-rinse adhesive system, the fiberglass posts were cemented with a dual-cure resin-cement. Roots were sectioned transversely into six 1-mm slices for push-out BS test at 0.5 mm/min. Some roots of each group were selected for evaluation of the conditioning pattern by scanning electron microscopy. BS results (three-way ANOVA and Tukey’s test) and the conditioning pattern (Kruskal–Wallis test and Mann–Whitney test) were statistically evaluated (α= 0.05).

Results

The highest BS value was observed with a liquid phosphoric acid under sonic application mode (p < 0.05), being all other groups similar to one another (p < 0.05). Also, the highest BS value was observed in the cervical third, followed by the medium and the apical thirds (p < 0.05). The sonic application produced better smear layer removal and opening of dentinal tubules for both viscosities (p = 0.015).

Conclusion

A better bonding of fiberglass posts to root canals can be achieved when the post spaces are conditioned with a liquid phosphoric acid under sonic application.

The antibiofilm and collagen-stabilizing effects of proanthocyanidin as an auxiliary endodontic irrigant

AIM

To evaluate the antibiofilm effect of proanthocyanidin (PA) solution as an irrigant against Enterococcus faecalis (E. faecalis) and its influence on the mechanical properties and biodegradation resistance of demineralized root dentine.

METHODOLOGY

Enterococcus faecalis were introduced into human root dentine tubules by a serial centrifugation method and grown for 1 week. Dentine blocks infected with 1-week-old E. faecalis biofilms were treated with the following irrigants: sterile water (control), 2% chlorhexidine (CHX), 2% PA, 5% PA and 10% PA. After treatment, the live and dead bacteria proportions within E. faecalis biofilms were analysed using confocal laser scanning microscopy. To evaluate the biostability of fully demineralized dentine treated by the aforementioned irrigants, the elastic modulus and hydroxyproline release of human dentine incubated in collagenase solution were tested at baseline, after irrigant treatment and after biodegradation, respectively. Furthermore, the surface chemical bond of demineralized dentine collagen treated by various irrigants was characterized by X-ray photoelectron spectroscopy (XPS). Statistical analysis was performed using one-way anova and Tukey's post hoc multiple comparisons with the significance level at 5%.

RESULTS

The proportion of dead E. faecalis volume was significantly higher in the PA and CHX groups than that in the control group (P < 0.05). PA irrigation significantly increased the mechanical properties of demineralized dentine (P < 0.05), and the effect was enhanced with increasing PA concentration. CHX and PA groups had significantly less elasticity loss and hydroxyproline release (P < 0.05). The biomodification of dentine collagen by PA was verified by increased C-O/C-N peak percentage under C1s and C-O peak percentage under O1s narrow-scan XPS spectra.

CONCLUSIONS

Proanthocyanidin killed E. faecalis within biofilms and enhanced the biostability of the collagen matrix of demineralized root dentine. It might be used as an auxiliary endodontic irrigant with antibiofilm and collagen-stabilizing effects.

Dentin Bonding and SEM Analysis of a New Experimental Universal Adhesive System Containing a Dendrimer

Due to their polymerization characteristics, hyper-branched dendrimers have lately shown to be promising candidates for use in dental materials. In this study, a new dental adhesive system was prepared, using a dendrimer derived from 2-isocyanatoethyl methacrylate (G-IEMA), and its adhesive properties were investigated. The exposed dentin was treated with four universal adhesives (UAs): SBU (Scotchbond Universal^™), FUT (Futurabond M+^™), AE1 (experimental adhesive with Bis-GMA) and AE2 (experimental adhesive with G-IEMA), using Etch & Rinse (ER) or Self Etch (SE) protocols. Composite build-ups were prepared and stored for 24 h at 37 °C in distilled water. Composite/dentin beams were prepared with cross-sectional areas of 1 ± 0.3 mm² and µTBS (Micro-tensile bond strength) test was performed at 0.5 mm/min. Failures modes were evaluated by stereomicroscopy, and bonding interfaces were observed by scanning electron microscopy (SEM). Statistical analysis of µTBS data was performed using General Linear (GLM) and Linear Mixed Models (LMM). The effect of adhesive type on µTBS was significant (p = 0.010), with AE1 presenting significantly higher µTBS than SBU (p = 0.019). No other differences between adhesives were observed. ER showed significantly better results than SE (p = 0.019), and no significant interactions between the adhesives and protocols were determined. Results obtained so far pinpoint the emergence of a new paradigm in the dental materials field, as G-IEMA can be used successfully as an alternative to Bis-GMA.

Enamel Repair with Amorphous Ceramics

Developing high-performance materials in physiological conditions to clinically repair stiff tissue for long lifespan remains a great challenge. Here, an enamel repair strategy is reported by efficiently growing a biocompatible ZrO₂ ceramic layer on defective enamel through controllable hydrolysis of Zr⁴⁺ in oral-tolerable conditions. Detailed analysis of the grown layer indicates that the grown ZrO₂ ceramic is amorphous without grain boundary and dislocation, which endows the repaired enamel with natural enamel comparable mechanical performance (modulus ≈82.5 GPa and hardness ≈5.2 GPa). Besides, the strong chemical connection between unsaturated coordinated Zr⁴⁺ in amorphous structure and PO₄ ^3- greatly strengthen the crystalline-amorphous interface of the repaired enamel to endure the long-time mastication damage. Moreover, these ZrO₂ ceramics provide hydrophilic, electronegative, and smooth surfaces to resist the adhesion and proliferation of cariogenic bacteria. The hybrid amorphous-crystalline interface design with advantages in biomechanical compatibility would promote the evolution of a variety of cutting-edge functional materials for medical and engineering application.

Enhancement performance of application mussel-biomimetic adhesive primer for dentin adhesives

In this study, a bioinspired adhesive primer monomer was prepared and evaluated for durable adhesion between dentin and composite resins.

Influence of photobio-modulation with an Er,Cr: YSGG laser on dentin adhesion bonded with bioactive and resin-modified glass ionomer cement

METHODS

One hundred and twenty extracted human molars were allocated in eight groups (n = 15) based on surface conditioning and cement type. Specimens of groups 2 and 6 were conditioned with ECL whereas, groups 3 and 7 were treated with ECL + ethylenediamine tetra acetic acid (EDTA). Specimens in groups 4 and 8 were surface conditioned by ECL + EDTA + Tetric-N-Bond, and groups 1 and 5 were considered as control (non-surface treated). Cement build-ups were performed on the surface-treated dentin with BAC (groups 1-4) and RMGIC (groups 5-8). A universal testing machine was used to measure the SBS and the mode of failure was evaluated using a stereomicroscope. Statistical analysis was performed using an analysis of variance and Tukey's post hoc test, at a significance level of p < 0.001.

RESULTS

The highest SBS values were observed in group 8, ECL + EDTA + Tetric-N-Bond + RMGIC (21.54 ± 3.524 MPa) and the lowest SBS values were displayed by group 1, with no surface treatment and BAC application (11.99 ± 0.821 MPa). The majority of failures were found to be mixed in lased dentin-treated dentin surfaces. BAC when bonded to dentin surfaces conditioned with ECL showed lower SBS in comparison to RMGIC.

CONCLUSION

Conditioning of dentin with ECL and a bonding agent (Tetric-N-bond) improved bond strength scores for BAC and RMGIC. Use of EDTA improved bond strength values when bonded to BAC and RMGIC; however, this improvement was not statistically significant.

Novel riboflavin/VE-TPGS modified universal dentine adhesive with superior dentine bond strength and self-crosslinking potential

OBJECTIVE

To modify a universal dentine adhesive with different concentrations of riboflavin and D-Alpha 1000 Succinate polyethylene (VE-TPGS) as a chemical enhancer and to assess the micro-tensile bond strength (24h/12 months), determine resin penetration, measurement of intermolecular interactions and cytotoxicity.

MATERIALS AND METHODS

An experimental adhesive system based on bis-GMA, HEMA and hydrophobic monomer was doped with RF0.125 (RF - Riboflavin) or RF/VE-TPGS (_0.25/0.50) and submitted to μTBS evaluation. Resin dentine slabs were prepared and examined using SEM and TEM. Adhesion force was analysed on ends of AFM cantilevers deflection. Quenched peptide assays were performed using fluorescence scanner and wavelengths set to 320nm and 405nm. Cytotoxicity was assessed using human peripheral blood mononuclear cell line. Molecular docking studies were carried out using Schrödinger small-molecule drug discovery suite 2018-2. Data from viable cell results was analyzed using one-way ANOVA. Bond strength values were analysed by two-way ANOVA. Nonparametric results were analyzed using a Kruskal-Wallis test at a 0.05 significance level.

RESULTS

RF/VE-TPGS_0.25 groups showed highest bond strength results after 24-h storage in artificial saliva (p<0.05). RF/VE-TPGS_0.50 groups showed increased bond strength after 12-months of ageing. RF/VE-TPGS modified adhesives showed appreciable presence of a hybrid layer. Packing fraction indicated solid angle profiles describing well sized density and topology relations for the RF/VE-TPGS adhesives, in particular with the RF/VE-TPGS_0.50 specimens. Qualitative analysis of the phenotype of macrophages was prominently CD163+ in the RF/VE-TPGS_0.50. Both the compounds showed favourable negative binding energies as expressed in terms of 'XP GScore'.

CONCLUSION

New formulations based on the incorporation of RF/VE-TPGS in universal adhesives may be of significant potential in facilitating penetration, distribution and uptake of riboflavin within the dentine surface.

Quick bonding using a universal adhesive

OBJECTIVES

This study aimed to measure the microtensile bond strength (μTBS) of a new universal adhesive (UA) bonded to dentin following a quick bonding mode.

MATERIALS AND METHODS

The experimental UA 'SKB-100,' now commercialized as Clearfil Universal Bond Quick ('C-UBq'; Kuraray Noritake), was investigated, with Scotchbond Universal ('SBU'; 3M Oral Care) and the two-step self-etch (SE) adhesive Clearfil SE Bond 2 ('C-SE2'; Kuraray Noritake) serving as references. The adhesives were employed separately in etch&rinse (E&R) and SE modes on each tooth half following a split-tooth design and following their respective instructions for use, except for C-UBq that besides the manufacturer's instructed quick bonding mode was also applied and left untouched for 20 s prior to light curing ('C-UBq_20s') and for C-SE2 that was also applied in the E&R mode. μTBS of half of the specimens was measured upon 1 week (1w), with the other half tested after 6-month (6m) storage in distilled water at 37 °C. Data were statistically analyzed using linear mixed-effects modeling and three-way ANOVA (p < 0.05). The adhesive-dentin interfaces were ultrastructurally characterized by TEM.

RESULTS

C-UBq revealed a significantly lower μTBS than C-SE2. The highest μTBS was recorded for C-UBq_20s_1w and C-SE2_1w, both when applied in E&R mode. However, μTBS of C-UBq_20s significantly decreased upon aging in both modes. C-SE2 presented the significantly highest 'aged' μTBS.

CONCLUSION

C-UBq applied in the quick bonding mode did not underperform to the UAs applied for 20 s. Superior bonding effectiveness was achieved by C-SE2 in SE and E&R bonding modes.

CLINICAL RELEVANCE

Extended application time of C-UBq improved solely its immediate but not aged bonding effectiveness.

Threats to adhesive/dentin interfacial integrity and next generation bio-enabled multifunctional adhesives

Nearly 100 million of the 170 million composite and amalgam restorations placed annually in the United States are replacements for failed restorations. The primary reason both composite and amalgam restorations fail is recurrent decay, for which composite restorations experience a 2.0-3.5-fold increase compared to amalgam. Recurrent decay is a pernicious problem-the standard treatment is replacement of defective composites with larger restorations that will also fail, initiating a cycle of ever-larger restorations that can lead to root canals, and eventually, to tooth loss. Unlike amalgam, composite lacks the inherent capability to seal discrepancies at the restorative material/tooth interface. The low-viscosity adhesive that bonds the composite to the tooth is intended to seal the interface, but the adhesive degrades, which can breach the composite/tooth margin. Bacteria and bacterial by-products such as acids and enzymes infiltrate the marginal gaps and the composite's inability to increase the interfacial pH facilitates cariogenic and aciduric bacterial outgrowth. Together, these characteristics encourage recurrent decay, pulpal damage, and composite failure. This review article examines key biological and physicochemical interactions involved in the failure of composite restorations and discusses innovative strategies to mitigate the negative effects of pathogens at the adhesive/dentin interface. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2466-2475, 2019.

Effect of grape seed extract-containing phosphoric acid formulations on bonding to enamel and dentin

The aim was to evaluate the effect of 2% grape seed extract (GSE) containing phosphoric acid (PhA) on the bond strength to enamel and dentin. The control group was 37% PhA. The following three PhA formulations with 2% GSE and 20% ethanol were obtained: GSE5 = 5% PhA; GSE10 = 10% PhA; and GSE20 = 20% PhA. The enamel and dentin surfaces of molars were etched with the acid solutions, followed by Scotchbond Multi-Purpose adhesive and composite resin application. The tensile bond strength (TBS) test evaluated the bond to enamel after 24 h, and the microtensile bond strength (μTBS) test evaluated the bond to dentin after 24 h and 12-month water storage. Etched enamel and dentin were observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. The TBS data were submitted to one-way ANOVA, while µTBS data were submitted to two-way ANOVA and Tukey's test (α = 0.05). The TBS (MPa) to enamel did not significantly differ among the control (48.1 ± 15.7), GSE5 (46.1 ± 9.6), GSE10 (49.8 ± 13.6) and GSE20 (44.1 ± 11.9) groups (p = 0.537). The µTBS (MPa) to dentin of the control (28.4 ± 14.4) and GSE20 (24.1 ± 8.1) groups were significantly higher than those of the GSE5 (16.8 ± 7.4) and GSE10 (17.5 ± 6.6) groups at 24 h (p < 0.006). After 12-month storage, only GSE5 (21.0 ± 7.8) and GSE10 (17.6 ± 8.0) did not show significantly decreased μTBS (p > 0.145). SEM micrographs showed a shallower enamel etching pattern for GSE5. AFM images showed the formation of collagenous globular structures for GSE5 and GSE10. The different acid solutions did not influence the TBS to enamel, and the µTBS to dentin was stable over time when dentin was etched with GSE5 and GSE10.

Effect of polyvinylphosphonic acid on resin-dentin bonds and the cytotoxicity of mouse dental papilla cell-23

STATEMENT OF PROBLEM

Polyvinylphosphonic acid (PVPA) could be used as a biomimetic remineralization analog and a matrix metalloproteinases (MMPs) inhibitor. However, studies are lacking regarding the performance of PVPA in dental bonding systems for maintaining the durability of the resin-dentin bond.

PURPOSE

The purpose of this in vitro study was to investigate the effect of PVPA on the durability of resin-dentin bonds and the viability of mouse dental papilla cell-23 (MDPC-23). The mechanical properties of resin-dentin interfaces during long-term storage were analyzed, and the potential application of PVPA as a biomimetic remineralization analog in adhesive dentistry was evaluated.

MATERIAL AND METHODS

Seventy-five extracted noncarious human third molars were collected and randomly divided into 5 groups, and then the microtensile bond strength (μTBS) data and scanning electron microscope (SEM) images were used to evaluate the preservation condition of resin-dentin bonds after 1 day, 6 months, and 1 year of storage. The cytotoxicity of PVPA was detected by cell proliferation assay and cell apoptosis assay.

RESULTS

Compared with the control and chlorhexidine (CHX) groups, the combined group (treated with both 200-μg/mL PVPA and biomimetic remineralization) had excellent bond durability. The exposed collagen fibril from the PVPA-treated groups (included 200-μg/mL and 500-μg/mL PVPA groups and a combined group) still showed integrity after 1 year of storage when compared with the control group. PVPA up to 500 μg/mL showed no cytotoxicity to MDPC-23 and did not inhibit cell growth.

CONCLUSIONS

This study offered evidence that PVPA did not result in cytotoxicity at low concentrations as an MMP inhibitor and a biomimetic remineralization analog. In addition, the application of PVPA improved bond strength and preserved collagen integrity after 1 year of in vitro storage.

The functions of hydrophobic elastic polyurethane combined with an antibacterial triclosan derivative in the dentin restoration interface

Dentin restoration produces weak interfaces because of the effects of bacterial microflora, biofilms, and mechanical, thermal, and shrinkage stresses. This results in secondary caries. Therefore, hydrophobic elastic polyurethane (PU) containing different concentrations of triclosan derivatives was synthesized and applied to solve this problem. The antibacterial PU was characterized according to its tensile strength (TS) and elasticity (ε) via a universal testing machine, and water sorption (Wsp) and solubility testing (Wsl) was performed according to ISO 4049: 2009. Additionally, this study evaluated the antibacterial properties of PU against Streptococcus mutans (ATCC35668) and Escherichia coli (ATCC25922). A marginal leakage test was performed to evaluate the leakage prevention property. As a result, the antibacterial PU showed high TS (>17 MPa), high elasticity (ε > 65%), and low Wsp (>81.06 μg/mm³) and Wsl (>11.22 μg/mm³). The PU exhibited antibacterial effects against both Streptococcus mutans and Escherichia coli. The antibacterial rates were over 90% and >99% for the 3% and 5% groups, respectively. Moreover, the marginal level of leakage was 0. Based on the mechanical properties, Wsp and Wsl values and the antibacterial properties, the 3% group exhibited satisfactory performance and has been deemed a possible solution to reduce the occurrence of secondary caries.

The inhibitory effect of carboxyl-terminated polyamidoamine dendrimers on dentine host-derived matrix metalloproteinases in vitro in an etch-and-rinse adhesive system

The biomimetic remineralization of collagen fibrils has increased interest in restoring the demineralized dentine generated by dental caries. Carboxyl-terminated polyamidoamine dendrimers (PAMAM-COOH), hyperbranched polymeric macromolecules, can act as non-collagenous proteins to induce biomimetic remineralization on a dentine organic matrix. However, in vivo remineralization is an extremely time-consuming process; before complete remineralization, demineralized dentine collagen fibrils are susceptible to degradation by host-derived matrix metalloproteinases (MMPs). Therefore, we examined the effect of fourth-generation PAMAM-COOH (G4-PAMAM-COOH) on the collagenolytic activities of endogenous MMPs, the interaction between G4-PAMAM-COOH and demineralized dentine collagen and the influence of G4-PAMAM-COOH pre-treatment on resin-dentine bonding. G4-PAMAN-COOH not only inhibited exogenous soluble rhMMP9 but also hampered the proteolytic activities of dentine collagen-bound MMPs. Cooperated with the results of G4-PAMAM-COOH absorption and desorption, FTIR spectroscopy provided evidence for the exclusive electrostatic interaction rather than hydrogen or covalent bonding between G4-PAMAM-COOH and dentine collagen. Furthermore, G4-PAMAM-COOH pre-treatment showed no damage to resin-dentine bonding because it did not significantly decrease the elastic modulus of the demineralized dentine, degree of conversion, penetration of the adhesive into the dentinal tubules or ultimate tensile strength. Thus, G4-PAMAM-COOH can effectively inactivate MMPs, retard the enzymolysis of collagen by MMPs and scarcely influence the application of resin-dentine bonding.

Effect of Dentin Pretreatment with Arginine on Microshear Bond Strength of Etch-and-Rinse or Self-Etch Adhesive Systems

Objective The main purpose of this study was to evaluate the effect of dentin pretreatment with 8% arginine on the immediate and 6-month bond strength (BS) of adhesive systems and surface morphology of dentin.

Materials and Methods Dentin bovine specimens (5 × 5 mm) were allocated into following pretreatments: without pretreatment (conventional technique, C) or exposure to arginine solution (A) for 5 minutes prior to tooth restoration. The adhesive procedure was performed using ( n = 12): 3-step etch-and-rinse adhesive (Scotchbond Multipurpose—SBMP [C+SBMP and A+SBMP]); 2-step etch-and-rinse adhesive (Single Bond 2 - SB [C+SB and A+SB]); or 2-step self-etch adhesive (Clearfil SE Bond - CSEB [C+CSEB and A+CSEB]). After 24 hours, the composite resin restorations were evaluated immediately and after 6 months of water storage using a microshear test and fracture pattern. The dentin surface exposed to A was assessed by scanning electron microscopy (SEM). The immediate BS data were submitted to a two-way analysis of variance and Tukey's test, and the long-term BS results were analyzed using Kruskal–Wallis and Dunn tests (α = 0.05).

Results There was a significant decrease in immediate and 6-month BS for the A+SB and A+CSEB groups, which differed statistically from the C group. The fracture pattern was predominantly adhesive for SB and CSEB adhesive for C and A. The SEM images presented a different conditioning pattern of the dentin exposed to A.

Conclusion The dentin pretreatment with arginine interfered negatively in the immediate and long-term BS of the simplified adhesive system. However, the SBMP adhesive was not affected by arginine pretreatment presenting the most satisfactory results.

Dentin remineralization via adhesive containing amorphous calcium phosphate nanoparticles in a biofilm-challenged environment

OBJECTIVES

The remineralization of dentin at a bonded interface would help to strengthen the bonded interface and inhibit secondary caries, and would prolong the longevity of restoration. The aim of this study was to investigate the remineralization of demineralized human dentin in a dental biofilm environment via an adhesive containing nanoparticles of amorphous calcium phosphate (NACP).

METHODS

Dentin demineralization was promoted by subjecting samples to a Streptococcus mutans acidic biofilm for 24 h. Samples were divided into a control group, a commercial fluoride-releasing adhesive group, and an NACP adhesive group. All samples were subjected to a remineralization protocol consisting of 4-h exposure per 24-h period in brain heart infusion broth plus 1% sucrose (BHIS) followed by immersion in artificial saliva for the remaining period. The pH of BHIS after 4-h immersion was measured every other day. After 10 days, the biofilm was assessed for colony-forming unit (CFU) count, lactic acid production, live/dead staining, and calcium and phosphate content. The mineral changes in the demineralized dentin samples were analyzed by transverse microradiography, hardness measurement, X-ray diffraction characterization, and scanning electron microscopy.

RESULTS

The NACP adhesive achieved acid neutralization, decreased biofilm CFU count, decreased biofilm lactic acid production, and increased biofilm calcium and phosphate content (P < 0.05). The NACP adhesive group had higher remineralization value than the commercial fluoride-releasing adhesive group (P < 0.05).

CONCLUSIONS

The NACP adhesive was effective in remineralizing dentin lesions in a biofilm model. Its ability to protect bond interface, inhibit secondary caries, and prolong the longevity of restoration is promising.

CLINICAL SIGNIFICANCE

Using NACP-containing adhesives could be recommended because of the protective ability of its hybrid layer even under a biofilm-challenged environment.

Six-month performance of restorations produced with the ethanol-wet-bonding technique: a randomized trial

This double-blind randomized controlled clinical trial evaluated the effectiveness of dentin pretreatment with 100% ethanol (EWBT - ethanol wet bonding technique) and different adhesive protocols in noncarious cervical lesions (NCCL) after 6 months. Patients presenting at least one NCCL were included. NCCLs (n=148) were randomly assigned to 4 groups: NE (Non-EWBT + three-step etch-and-rinse (Scotchbond Multi Purpose, 3M ESPE [MP]), E (EWBT + MP); EB (EWBT + [Bond - third step of MP]), and EU (EWBT + universal adhesive (Single Bond Universal, 3M ESPE). Conventional acid-etching (Condac 37%, FGM) and nanohybrid resin composite (Z350, 3M ESPE) were used. Trained and calibrated examiners (Kappa = 0.61) evaluated the restorations at baseline (7 days) and 6-month recall using the USPHS modified criteria. Data were subjected to Chi square (α = 0.05). Differences in the success rate were found for the treatments (p = 0.003). EB presented the lowest success rate compared with the other groups (p < 0.02). No significant differences were detected among NE, E, and EU (p > 0.49). The survival rates were 97.23%, 97.30%, 78.95%, and 97.30% for NE, E, EB, and EU, respectively. Regarding postoperative sensitivity, a significant reduction was found for groups E (p = 0.027) and EU (p < 0.01) after 6 months. After 6 months, EWBT associated to the hydrophobic adhesive system had the highest failure rate.

Dental remineralization via poly(amido amine) and restorative materials containing calcium phosphate nanoparticles

Tooth decay is prevalent, and secondary caries causes restoration failures, both of which are related to demineralization. There is an urgent need to develop new therapeutic materials with remineralization functions. This article represents the first review on the cutting edge research of poly(amido amine) (PAMAM) in combination with nanoparticles of amorphous calcium phosphate (NACP). PAMAM was excellent nucleation template, and could absorb calcium (Ca) and phosphate (P) ions via its functional groups to activate remineralization. NACP composite and adhesive showed acid-neutralization and Ca and P ion release capabilities. PAMAM+NACP together showed synergistic effects and produced triple benefits: excellent nucleation templates, superior acid-neutralization, and ions release. Therefore, the PAMAM+NACP strategy possessed much greater remineralization capacity than using PAMAM or NACP alone. PAMAM+NACP achieved dentin remineralization even in an acidic solution without any initial Ca and P ions. Besides, the long-term remineralization capability of PAMAM+NACP was established. After prolonged fluid challenge, the immersed PAMAM with the recharged NACP still induced effective dentin mineral regeneration. Furthermore, the hardness of pre-demineralized dentin was increased back to that of healthy dentin, indicating a complete remineralization. Therefore, the novel PAMAM+NACP approach is promising to provide long-term therapeutic effects including tooth remineralization, hardness increase, and caries-inhibition capabilities.

Effect of benzalkonium chloride on dentin bond strength and endogenous enzymatic activity

OBJECTIVE

This in vitro study evaluated at baseline (T0) and over time (T12 months), the effect of a multi-mode universal adhesive compared with two experimental formulations blended with different concentrations of benzalkonium chloride (BAC), on bond strength and endogenous enzymatic activity.

METHODS AND MATERIALS

Specimens were assigned to the following groups according to the adhesive protocol: G1) All-Bond Universal (ABU) self-etch (SE); G2) ABU + 0.5% BAC SE; G3) ABU + 1% methacrylate BAC SE; G4) ABU etch-and-rinse (E&R); G5) ABU + 0.5% BAC E&R; G6) ABU + 1% methacrylate BAC E&R. Gelatin zymography was performed on dentin powder obtained from eight human third molars. Endogenous enzymatic activity within the hybrid layer was examined using in situ zymography after 24 h (T0) or 1-year storage in artificial saliva (T12). Forty intact molars were prepared for microtensile bond strength test at T0 and T12. Results were statistically analyzed with three-way ANOVA (α = 0.05).

RESULTS

Gelatin zymography assay and in situ zymography quantification analyses indicated that all the BAC-containing formulations decreased matrix metalloproteinase expression. However, in situ zymography showed a general trend of enzymatic activity increase after aging. Microtensile bond-strength testing showed decrease in bond strength over time in all the tested groups; performances of the 1% methacrylate BAC experimental groups were worse than the control.

CONCLUSIONS

BAC-containing adhesives reduce endogenous enzymatic activity both immediately and over time. However, independently from the adhesive employed, increase in the gelatinolytic activity over time and decrease in bond strength was found (especially in the BAC + 1% methacrylate groups), probably due to impaired polymerization properties.

CLINICAL SIGNIFICANCE

Adhesives containing protease inhibitors are practical and efficient tools in clinical practice for enhancement of the longevity of dental restorations. However, extensive investigation of the mechanical and adhesive properties of the material is necessary prior to their clinical use.

Human neutrophils degrade methacrylate resin composites and tooth dentin

Cholesterol esterase-like (CE) activity from saliva and esterase from cariogenic bacteria hydrolyze ester linkages of dental methacrylate resins. Collagenolytic, matrix metalloproteinase-like (MMP) activities from dentin and bacteria degrade collagen in demineralized tooth dentin. Human neutrophils in the oral cavity contain factors that are hypothesized to have CE and MMP activities that could contribute to the degradation of methacrylate resins and dentinal collagen. OBJECTIVES: To measure the CE and MMP activities from human neutrophils and their ability to degrade dental methacrylate resin composite and dentinal collagen. Neutrophils' CE and MMP activities were measured using nitrophenyl-esters or fluorimetric MMP substrates, respectively. Neutrophils' degradation of resin composite and dentinal collagen was quantified by measuring release of a universal 2,2-Bis[4-(2-hydroxy-3-methacryloxypropoxy)phenyl]propane (bisGMA)-derived resin composite degradation byproduct, bishydroxy-propoxy-phenyl-propane (bisHPPP), or a collagen degradation by-product, hydroxyproline, respectively using ultra performance liquid chromatography/mass spectrometry. Neutrophils' CE activity increased the release of bisHPPP from bisGMA monomer compared to control after 24 and 48 h (p < 0.05). Neutrophils degraded polymerized resin composite and produced higher amounts of bisHPPP than buffer after 48 h of incubation (p < 0.05). Neutrophils show generic MMP, gelatinase, MMP-2 and MMP-9, and collagenase, MMP-1 and MMP-8 activities that were stable or increased over the first 24 h (p < 0.05). Neutrophils degraded demineralized dentin more than buffer-only groups, indicated by higher amounts of hydroxyproline (p < 0.05). The ability of neutrophils to degrade both dental resin composite and tooth dentin, suggest neutrophil's potential role in root caries, and in recurrent carries by accelerating the degradation of resin-dentin interfaces, and compromising the longevity of the restoration. STATEMENT OF SIGNIFICANCE: Neutrophils are part of the innate immune system and are constantly entering the oral cavity through the gingival sulcus, in direct contact with the tooth, restoration, restoration-tooth margins and pathogenic bacteria. The current study is the first to characterize and quantify degradative activities from neutrophils toward methacrylate resin and demineralized dentin, the two main components of the restoration-tooth interface, suggesting that this interface could be negatively influenced by neutrophils, potentially contributing to increase in caries formation and progression, and premature restoration failure. This study provides a significant finding to the biomaterials and oral health fields by identifying a potential weakness in current restorative procedures and materials used to manage gingival proximal and cervical gingival or sub-gingival carious lesions.

Physicochemical and biological properties of novel chlorhexidine-loaded nanotube-modified dentin adhesive

A commercially available three-step (etch-and-rinse) adhesive was modified by adding chlorhexidine (CHX)-loaded nanotubes (Halloysite®, HNT) at two concentrations (CHX10% and CHX20%). The experimental groups were: SBMP (unmodified adhesive, control), HNT (SBMP modified with HNT), CHX10 (SBMP modified with HNT loaded with CHX10%), and CHX20 (SBMP modified with HNT loaded with CHX20%). Changes in the degree of conversion (DC%), Knoop hardness (KHN), water sorption (WS), solubility (SL), antimicrobial activity, cytotoxicity, and anti-matrix metalloproteinase [MMP-1] activity (collagenase-I) were evaluated. In regards to DC%, two-way ANOVA followed by Tukey's post-hoc test revealed that only the factor "adhesive" was statistically significant (p < 0.05). No significant differences were detected in DC% when 20 s light-curing was used (p > 0.05). For Knoop microhardness, one-way ANOVA followed by the Tukey's test showed statistically significant differences when comparing HNT (20.82 ± 1.65) and CHX20% (21.71 ± 2.83) with the SBMP and CHX10% groups. All adhesives presented similar WS and cytocompatibility. The CHX-loaded nanotube-modified adhesive released enough CHX to inhibit the growth of S. mutans and L. casei. Adhesive eluates were not able to effectively inhibit MMP-1 activity. The evaluation of higher CHX concentrations might be necessary to provide an effective and predictable MMP inhibition. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res B Part B, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 868-875, 2019.

Dry-bonding to dentin using alternative conditioners based on iron-containing solutions or nitric acid

OBJECTIVES

To evaluate the effect of experimental conditioners (10-3 solution - 10-3, 6.8% ferric oxalate - FOX, and 1.4% nitric acid - NI) on dentin elastic modulus, flexural strength, bond strength, failure mode, and adhesive interface morphology of two etch-and-rinse adhesives (XP Bond, Dentsply or One-Step, Bisco) applied on etched dry dentin.

METHODS

Sound human third molars were used for the microtensile bond strength test (n = 8), performed at 24 h and after one year of water storage. Failure modes were evaluated by scanning electron microscopy. Dentin bonding interface was analyzed by confocal laser scanning microscopy (n = 3). Adhesive systems were applied on phosphoric acid-etched, wet (positive control) and dry (negative control) dentin, and on etched and dry dentin previously treated with 10-3 (15s), FOX (60s), or NI (15s). Bovine dentin bars (n = 15) were immersed into the conditioning solutions and subjected to a three-point bending test.

RESULTS

XP Bond + 10-3 or NI resulted in lower bond strength than phosphoric acid. One-Step + 10-3 or NI resulted in bond strengths equivalent to the positive control. Experimental conditioners presented no bond strength reduction after one year, regardless of the bonding agent tested. One-Step resulted in more adhesive failures than XP Bond at 24 h, and mixed failures increased after storage. All experimental conditioners promoted hybridization and resin tags formation, except FOX. Dentin elastic modulus was not affected by the conditioners, whereas flexural strength was significantly reduced by FOX.

CONCLUSIONS

Adequate and stable dentin bonds were achieved when the bonding agents were applied on 10-3 or NI-treated dentin. None of the experimental conditioners reduced dentin elastic modulus, but dentin flexural strength was significantly reduced by FOX-conditioning.

Influence of grape seed extract in adhesion on dentin surfaces conditioned with Er,Cr:YSGG laser

The proanthocyanidin (PA)-rich grape seed extract (GSE) is a collagen cross-linking agent that can perform a chemical bond with the dentin's collagen. The objective of this study was to evaluate the influence on shear bond strength (SBS) of the pre-conditioning of GSE, on human dentin surfaces conditioned with Er,Cr:YSGG laser. The sample consisted of 64 non-carious human teeth, divided into eight groups, four groups conditioned with Er,Cr:YSGG laser (4.5 W, 50 Hz, 50 μs, 70% air, 90% water) and four prepared with conventional methods (control). In both groups, a GSE solution was applied before using the two adhesives tested: Clearfil^™ SE Bond (CSE) and Scotchbond^™ Universal (SU). Subsequently, a SBS test, a scanning electron microscopy, and a statistical analysis were performed. In the laser groups, the best SBS mean (20.08 ± 4.01 MPa) was achieved in the group treated with GSE and CSE. The control group with the application of CSE showed the highest SBS mean (24.27 ± 10.28 MPa), and the group treated with laser and SU showed the lowest SBS mean (12.94 ± 6.51 MPa). Between these two groups there was a statistically significant difference (p = 0.05). However, this was not observed among the laser or control groups. The type of dentin surface preparation can influence the SBS. The CSE showed better SBS in laser and control groups. The presence of GSE did not improve the adhesion on surfaces conditioned with laser, but more studies should be carried out in the future to confirm this conclusion.

Size effect of nano-hydroxyapatite on proliferation of odontoblast-like MDPC-23 cells

Nano-hydroxyapatite (nano-HAP) is supposed to be a promising candidate for apatite substitute in hard tissue engineering. We aimed to investigate the effect of nano-HAP particles on the proliferation of odontoblast-like MDPC-23 cells compared with conventional hydroxyapatite (c-HAP). HAP in diameter of ~20 nm (np20), ~70 nm (np70) and ~200 nm (c-HAP) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). Inverted microscope and MTT assay were used to detect the morphology and proliferation rate of MDPC-23 cells; TEM was used to reveal the internalization of HAP. We found that nano-HAP (np20 and np70), especially np20 expressed obvious growth-promoting effect on MDPC-23 cells compared with c-HAP, which caused the most vacuole in MDPC-23 cells. These results suggest that nano-HAP may be an optimal choice of apatite substitute for MDPC-23 cells on the aspect of cell proliferation.

Modifying Adhesive Materials to Improve the Longevity of Resinous Restorations

Dental caries is a common disease on a global scale. Resin composites are the most popular materials to restore caries by bonding to tooth tissues via adhesives. However, multiple factors, such as microleakage and recurrent caries, impair the durability of resinous restorations. Various innovative methods have been applied to develop adhesives with particular functions to tackle these problems, such as incorporating matrix metalloproteinase inhibitors, antibacterial or remineralizing agents into bonding systems, as well as improving the mechanical/chemical properties of adhesives, even combining these methods. This review will sum up the latest achievements in this field.

Resin-Dentin Bonding Interface: Mechanisms of Degradation and Strategies for Stabilization of the Hybrid Layer

Several studies have shown that the dentin-resin interface is unstable due to poor infiltration of resin monomers into the demineralized dentin matrix. This phenomenon is related to the incomplete infiltration of the adhesive system into the network of exposed collagen fibrils, mainly due to the difficulty of displacement and subsequent replacement of trapped water between interfibrillar spaces, avoiding adequate hybridization within the network of collagen fibrils. Thus, unprotected fibrils are exposed to undergo denaturation and are susceptible to cyclic fatigue rupture after being subjected to repetitive loads during function. The aqueous inclusions within the hybrid layer serve as a functional medium for the hydrolysis of the resin matrix, giving rise to the activity of esterases and collagenolytic enzymes, such as matrix metalloproteinases, which play a fundamental role in the degradation process of the hybrid layer. Achieving better interdiffusion of the adhesive system in the network of collagen fibrils and the substrate stability in the hybrid layer through different strategies are key events for the interfacial microstructure to adequately function. Hence, it is important to review the factors related to the mechanisms of degradation and stabilization of the hybrid layer to support the implementation of new materials and techniques in the future. The enzymatic degradation of collagen matrix, together with resin leaching, has led to seeking strategies that inhibit the endogenous proteases, cross-linking the denudated collagen fibrils and improving the adhesive penetration removing water from the interface. Some of dentin treatments have yielded promising results and require more research to be validated. A longer durability of adhesive restorations could resolve a variety of clinical problems, such as microleakage, recurrent caries, postoperative sensitivity, and restoration integrity.

Effect of Er:YAG laser irradiation and chitosan biomodification on the stability of resin/demineralized bovine dentin bond

OBJECTIVE

The purpose of this study was to evaluate the effect of Er:YAG laser for selective removal of carious lesion, followed by biomodification with chitosan on the microtensile bond strength (µTBS), adhesive interface, dry mass loss and hydroxyproline release (HYP).

METHODS

Artificial lesions were created in 104 bovine dentin blocks. Blocks were divided according to caries removal method: bur or Er:YAG laser. Seventy-six blocks were acid etched and subdivided according to dentin biomodification: no chitosan and 2.5% chitosan. Composite resin restorations were performed. Blocks were sectioned into beams and stored in water. After 24 h, 6 and 12 months, beams were submitted to μTBS test (n = 10) and analysis of adhesive interface by SEM (n = 3). The other 28 blocks were sectioned into beams and initial dry mass (DM) was determined (n = 7). Beams were stored and after 7 days, DM was redetermined. HYP release (n = 7) was evaluated by ELISA. Data were analyzed by ANOVA and Bonferroni's tests (α = 0.05).

RESULTS

After 24 h, the highest µTBS was found for bur (p < 0.001). After 6 months, methods were similar (p = 0.432). After 12 months, laser-irradiated dentin showed the highest µTBS values (p = 0.025). Chitosan promoted higher µTBS values after 6 (p = 0.011) and 12 months (p < 0.001) preserving adhesive interface. Dry mass loss and HYP release were not influenced (p > 0.05) by caries removal method or by dentin biomodification.

CONCLUSION

The bond strength to demineralized dentin reduced over 50% in all groups after water storage. From 6 months of water storage, Er:YAG laser irradiation and biomodification with chitosan maintained the stability of the resin-dentin bonds, but did not influence dry mass loss and HYP release.

Phosphorylated chitosan to promote biomimetic mineralization of type I collagen as a strategy for dentin repair and bone tissue engineering

This novel biomimetic mineralization technique provides an efficient method to produce an advanced mineralized matrix.