Degradation and removal methods of antibiotics from aqueous matrices--a review

Adsorption of cationic dyes, drugs and metal from aqueous solutions using a polymer composite of magnetic/β-cyclodextrin/activated charcoal/Na alginate: Isotherm, kinetics and regeneration studies

In this work, we successfully synthesized novel polymer gel beads based on functionalized iron oxide (Fe3O4), activated charcoal (AC) particles with β-cyclodextrin (CD) and sodium alginate (SA) polymer (Fe3O4/CD/AC/SA), by a simple, reproducible and inexpensive method. These beads proved to be versatile and strong adsorbents with magnetic properties and high adsorption capacity. The composites were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, vibrating sample magnetometry, adsorption at -196 °C, high resolution transmission electron microscopy, thermogravimetric analysis and point of zero charge measurements. Two dyes, two drugs and one metal were used to test the adsorption capability of the prepared polymer nanocomposite. The adsorbent showed good removal efficiencies for the studied pollutants, especially the cationic dyes and the metal, when compared to other low-cost adsorbents. The saturated adsorption capacity of Fe3O4/CD/AC/SA reached 5.882 mg g-1 for methyl violet (MV), 2.283 mg g-1 for brilliant green (BG), 2.551 mg g-1 for norfloxacin (NOX), 3.125 mg g-1 for ciprofloxacin (CPX), 10.10 mg g-1 for copper metal ion (Cu(II)). The adsorption isotherm studies showed that data fitted well with Langmuir and Temkin isotherms models. The kinetic data showed good correlation coefficient with low error function for the pseudo-second order kinetic model. The data analysis was carried out using error and regression coefficient functions for the estimation of best-fitting isotherm and kinetic models, namely: chi-square test (χ2) and sum of the squares of errors (SSE). The activation energy was found to be 47.68 kJ mol-1 for BG, 29.09 kJ mol-1 for MV, 28.93 kJ mol-1 for NOX, 4.53 kJ mol-1 for CPX and 17.08 kJ mol-1 for Cu(II), which represent chemisorption and physisorption behavior of sorbent molecules. The polymer composites can be regenerated and easily separated from aqueous solution without any weight loss. After regeneration, the Fe3O4/CD/AC/SA beads still have good adsorption capacities up to four cycles of desorption and adsorption. The results indicate that the polymer gel beads are promising adsorbents for the removal of different categories of toxicants (like dyes, drugs and metal) in single adsorbate aqueous systems. Thus, the novel Fe3O4/CD/AC/SA beads can be effectively employed for a large-scale applications as environmentally compatible materials for the adsorption of different categories of pollutants.

Various strategies applied for the removal of emerging micropollutant sulfamethazine: a systematic review

Pharmaceutical active drug(s) especially sulfamethazine (SMZ) is considered as one of the major emerging microcontaminants due its long-term existence in the environmental system and that can influence on the developmental of antibacterial resistance genes. Because of this region it has a great concern in the aquatic system. Moreover, the vast utilization of SMZ, excretion of undigested portion by animals and also through dumping or mishandling, SMZ is frequently detected in various samples (including water) of different places and its surroundings. Additionally, reports shown it has toxic effect against microalgae and mice. Thus, that can lead to several investigators, focusing on removal of SMZ alone or in combination of other drugs in wastewater treatment plants (WWTPs) either by abiotic and/or biotic treatment methods. The present review provides an overview of the toxic effect of SMZ and SMZ degradation/removal in abiotic and biotic processes. Finally, reveals the need of further implication of integrated treatments (including engineered biological mediators) to understand ideal biological approaches for the mineralization of SMZ.

Synthesis and Characterization of ZnBi2O4 Nanoparticles: Photocatalytic Performance for Antibiotic Removal under Different Light Sources

This work aims to synthesize a photocatalyst with high photocatalytic performances and explore the possibility of using it for antibiotic removal from wastewater. For that, the spinel ZnBi2O4 (ZBO) was produced with the co-precipitation method and its optical, dielectric, and electrochemical characteristics were studied. The phase has been determined and characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). For the ZBO morphology, a Scanning Electron Microscopy (SEM) has been used. Then, the optical and dielectric properties of ZBO have been evaluated by calculating refractive index n (λ), extinction coefficient (k), dissipation factor (tan δ), relaxation time (τ), and optical conductivity (σopt) using the spectral distribution of T(λ) and R(λ). An optical gap band of 2.8 eV was determined and confirmed. The electrochemical performance of ZBO was investigated and an n-type semiconductor with a flat band potential of 0.54 V_SCE was found. The photocatalytic efficiency of ZBO was investigated in order to degrade the antibiotic Cefixime (CFX) under different light source irradiations to exploit the optical properties. A high CFX degradation of approximately 89% was obtained under solar light (98 mW cm−2) only after 30 min, while 88% of CFX degradation efficiency has been reached after 2 h under UV irradiation (20 mW cm−2); this is in line with the finding of the optical characterizations. According to the obtained data, solar light assisted nanoparticle ZBO can be used successfully in wastewater to remove pharmaceutical products.

Remediation of antibiotic wastewater by coupled photocatalytic and persulfate oxidation system: A critical review

Recently, antibiotics with high ecotoxicity have been ubiquitously detected in aquatic environment. The photocatalysis/persulfate-oxidation hybrid (PPOH) system has been proved as a promising strategy for antibiotic degradation. The efficient antibiotic removal is due to the favorable synergistic effects between photocatalysis and persulfate activation. To our best knowledge, relevant reviews on the photo-assisted persulfate activation (PPA) system have been reported, while the research progress on persulfate-assisted photocatalysis (PAP) and concurrent photocatalysis-persulfate activation (CPPA) systems for antibiotic wastewater treatment have yet been summarized. Hence, the PPOH systems are categorized into PPA, PAP and CPPA systems in this review. Besides, the performance of antibiotic degradation and internal mechanism in the coupled oxidation system are summarized and analyzed comprehensively. Finally, conclusions and future prospects of PPOH systems in antibiotic wastewater treatment are proposed. This study provides an overview of PPOH system and outlines the future research direction of the system in practical treatment of antibiotic wastewater.

Fe2+ and UV Catalytically Enhanced Ozonation of Selected Environmentally Persistent Antibiotics

The aim of the study was to determine oxidation potential of selected persistent, environmentally relevant antibiotics (Amoxicillin, Levofloxacin, and their mixture with Vancomycin) to reduce their environmental emissions. Ozonation (O3) and indirect ozonation at pH 9.5 (O3/pH9.5) were catalytically enhanced by addition of Fe2+ (O3/Fe2+) and photocatalytic ozonation in combination with Fe2+ and UV-A black light (O3/Fe2+/UV) at two temperatures using total organic carbon (TOC) and chemical oxygen demand (COD) to identify formation of by-products. Oxidative degradation followed pseudo-first order consecutive reactions. Initial phase of oxidation was more intensive than mineralisation at 21 and 40 °C: up to 57.3% and 69.2%, respectively. After 120 min mineralization at 21 °C was up to 64.9% while at 40 °C it was up to 84.6%. Oxidation reached up to 86.6% and 93.4% at 21 °C and 40 °C, respectively. The most efficient processes were indirect ozonation at pH 9.5 (O3/pH9.5) (up to 93.4%) and photocatalytic enhanced ozonation with Fe2+ and UV-A black light (O3/Fe2+/UV) (up to 89.8%). The lowest efficiency was determined in experiments with direct ozonation (up to 75.5%). Amoxicillin was the only one completely mineralised. Study confirmed that ozonation with addition of Fe2+ and UV radiation has the potential to improve efficiency of the antibiotic-removal processes. Further experiments varying amounts of Fe2+ and other experimental conditions should be accomplished to set up more general methodological approach for reduction of antibiotics emissions.

Artificial neural network modeling of cefixime photodegradation by synthesized CoBi2O4 nanoparticles

CoBi₂O₄ (CBO) nanoparticles were synthesized by sol-gel method using polyvinylpyrrolidone (PVP) as a complexing reagent. For a single phase with the spinel structure, the formed gel was dried and calcined at four temperatures stages. Various methods were used to identify and characterize the obtained spinel, such as X-ray diffraction (XRD), scanning electron micrograph (SEM-EDX), transmission electron microscope (TEM), Fourier transform infrared (FT-IR), X-ray fluorescence (XRF), Raman, and UV-Vis spectroscopies. The photocatalytic activity of CBO was examined for the degradation of a pharmaceutical product cefixime (CFX). Furthermore, for the prediction of the CFX degradation rate, an artificial neural network model was used. The network was trained using the experimental data obtained at different pH with different CBO doses and initial CFX concentrations. To optimize the network, various algorithms and transfer functions for the hidden layer were tested. By calculating the mean square error (MSE), 13 neurons were found to be the optimal number of neurons and produced the highest coefficient of correlation R² of 99.6%. The relative significance of the input variables was calculated, and the most impacting input was proved to be the initial CFX concentration. The effects of some scavenging agents were also studied. The results confirmed the dominant role of hydroxyl radical OH^• in the degradation process. With the novel CoBi₂O₄/ZnO hetero-system, the photocatalytic performance has been enhanced, giving an 80% degradation yield of CFX (10 mg/L) at neutral pH in only 3 h.

Decomposition process of cefotaxime sodium from antibiotic wastewater by Up-flow Blanket Filter (UBF) reactor: Reactor performance, sludge characteristics and microbial community structure analysis

In this study, a novel Up-flow Blanket Filter (UBF) reactor was applied to the degradation of antibiotic wastewater. The experiments showed that when the hydraulic retention time (HRT) was 24 h and the ratio of volatile fatty acids (VFA) to alkalinity (ALK) was 0.3, the best removal efficiency was achieved in the combined packing UBF reactor, and the COD removal efficiency reached 80.1%-84.6%, exhibiting a significant difference in reaction performance from the other two reactors (P < 0.05) and a good efficiency of cefotaxime sodium removal. Moreover, the microstructure and surface characteristics of the reactor fillers were studied through scanning electron microscope (SEM) analysis, which showed that three fillers all had biofilm adhesion, but the combined packing gave best performance. Energy dispersive spectrometer (EDS) tests indicated abundant element components in the combined packing. The particle size distribution of sludge was also considered in the experiment, and the result showed the particle size of sludge increased with the operation of the reactor. In addition, microbial community structures of sludge and biofilm with the combined packing were analyzed. High-throughput sequencing confirmed the existence of Pseudomonas, which had good adaptability to antibiotic wastewater and became the dominant bacteria. Decomposition process of cefotaxime sodium after hydrolysis and anaerobic treatment was analyzed through Fourier transform infrared spectroscopy (FTIR). The reactor, which is economical, exhibited favorable performance in degrading the pollutions in the antibiotic wastewater.

Synergetic decolorization of azo dyes using ultrasounds, photocatalysis and photo-fenton reaction

In the present work, ultrasound irradiation, photocatalysis with TiO₂, Fenton/Photo-Fenton reaction, and the combination of those techniques were investigated for the decolorization of industrial dyes in order to study their synergy. Three azo dyes were selected from the weaving industry. Their degradation was examined via UV illumination, Fenton and Photo-Fenton reaction as well as ultrasound irradiation at low (20 kHz) and high frequencies (860 kHz). In these experiments, we investigated the simultaneous action of the ultrasound and UV irradiation by varying parameters like the duration of photocatalysis and ultrasound irradiation frequency. At the same time, US power, temperature, amount of TiO₂ photocatalyst and amount of Fenton reagent remained constant. Due to their diverse structure, each azo dye showed different degradation levels using different combinations of the above-mentioned Advanced Oxidation Processes (AOPs). The Photo-Fenton reagent is more effective with US 20 kHz and US 860 kHz for the azo dyes originated from the weaving industry at pH = 3 as compared to pH = 6.8. The combination of the Photo-Fenton reaction with 860 kHz ultrasound irradiation for the same dye gave an 80% conversion at the same time. Experiments have shown a high activity during the first two hours. After that threshold, the reaction rate is decreased. FT-IR and TOC measurements prove the decolorization due to the destruction of the chromophore groups but not complete mineralization of the dyes.

Emerging Hybrid Nanocomposite Photocatalysts for the Degradation of Antibiotics: Insights into Their Designs and Mechanisms

The raising occurrence of antibiotics in the global water bodies has received the emerging concern due to their potential threats of generating the antibiotic-resistive and genotoxic effects into humans and aquatic species. In this direction, the solar energy assisted photocatalytic technique offers a promising solution to address such emerging concern and paves ways for the complete degradation of antibiotics with the generation of less or non-toxic by-products. Particularly, the designing of hybrid photocatalyticcomposite materials has been found to show higher antibiotics degradation efficiencies. As the hybrid photocatalysts are found as the systems with ideal characteristic properties such as superior structural, surface and interfacial properties, they offer enhanced photoabsorbance, charge-separation, -transfer, redox properties, photostability and easy recovery. In this context, this review study presents an overview on the recent developments in the designing of various hybrid photocatalytic systems and their efficiency towards the degradation of various emerging antibiotic pharmaceutical contaminants in water environments.

Efficient Photodegradation of Rhodamine B and Tetracycline over Robust and Green g-C3N4 Nanostructures: Supramolecular Design

Highly condensed g-C₃N₄ nanosheets with an exceptional surface area and porous structure were simply prepared by thermal condensation of stable preorganized supramolecular structures of cyanuric acid and melamine formed in water as the solvent. Different techniques were employed for the characterization of the structural, morphological, electrical, and optical features of the as-synthesized catalyst. All the characterizations confirmed the successful formation of nanosheets with magnificent properties compared to the pristine sample which was prepared by melamine polycondensation. Not only did these nanosheets exhibit a superb photocatalytic activity over the degradation of tetracycline (over 60%) and rhodamine B (100%) under visible light irradiation just for 15 min, but they also could maintain their stability during the reaction keeping over 98% of their original degradation even in 5 cycles. Superoxide anion radicals and holes were determined to be the main active species by trapping experiments. LC-Mass analysis was also performed to identify the intermediates and propose the possible pathway for photodegradation of tetracycline. The promising performance of this catalyst can be a notable step forward for prosperous industrial applications in the field of photodegradation of hazardous and not-easily degradable organic compounds in wastewater treatment plants.

Recent advances in photodegradation of antibiotic residues in water

Antibiotics are widely present in the environment due to their extensive and long-term use in modern medicine. The presence and dispersal of these compounds in the environment lead to the dissemination of antibiotic residues, thereby seriously threatening human and ecosystem health. Thus, the effective management of antibiotic residues in water and the practical applications of the management methods are long-term matters of contention among academics. Particularly, photocatalysis has attracted extensive interest as it enables the treatment of antibiotic residues in an eco-friendly manner. Considerable progress has been achieved in the implementation of photocatalytic treatment of antibiotic residues in the past few years. Therefore, this review provides a comprehensive overview of the recent developments on this important topic. This review primarily focuses on the application of photocatalysis as a promising solution for the efficient decomposition of antibiotic residues in water. Particular emphasis was laid on improvement and modification strategies, such as augmented light harvesting, improved charge separation, and strengthened interface interaction, all of which enable the design of powerful photocatalysts to enhance the photocatalytic removal of antibiotics.

Degradation of Antibiotics in Wastewater: New Advances in Cavitational Treatments

Over the past few decades, antibiotics have been considered emerging pollutants due to their persistence in aquatic ecosystems. Even at low concentrations, these pollutants contribute to the phenomenon of antibiotic resistance, while their degradation is still a longstanding challenge for wastewater treatment. In the present literature survey, we review the recent advances in synergistic techniques for antibiotic degradation in wastewater that combine either ultrasound (US) or hydrodynamic cavitation (HC) and oxidative, photo-catalytic, and enzymatic strategies. The degradation of sulfadiazine by HC/persulfate (PS)/H2O2/α-Fe2O3, US/PS/Fe0, and sono-photocatalysis with MgO@CNT nanocomposites processes; the degradation of tetracycline by US/H2O2/Fe3O4, US/O3/goethite, and HC/photocatalysis with TiO2 (P25) sono-photocatalysis with rGO/CdWO4 protocols; and the degradation of amoxicillin by US/Oxone®/Co2+ are discussed. In general, a higher efficiency of antibiotics removal and a faster structure degradation rate are reported under US or HC conditions as compared with the corresponding silent conditions. However, the removal of ciprofloxacin hydrochloride reached only 51% with US-assisted laccase-catalysis, though it was higher than those using US or enzymatic treatment alone. Moreover, a COD removal higher than 85% in several effluents of the pharmaceutical industry (500-7500 mg/L COD) was achieved by the US/O3/CuO process.

Sulfaquinoxaline Oxidation and Toxicity Reduction by Photo-Fenton Process

Sulfaquinoxaline (SQX) has been detected in environmental water samples, where its side effects are still unknown. To the best of our knowledge, its oxidation by Fenton and photo-Fenton processes has not been previously reported. In this study, SQX oxidation, mineralization, and toxicity (Escherichia coli and Staphylococcus aureus bacteria) were evaluated at two different setups: laboratory bench (2 L) and pilot plant (15 L). The experimental design was used to assess the influence of the presence or absence of radiation source, as well as different H2O2 concentrations (94.1 to 261.9 mg L-1). The experimental conditions of both setups were: SQX = 25 mg L-1, Fe(II) = 10 mg L-1, pH 2.8 ± 0.1. Fenton and photo-Fenton were suitable for SQX oxidation and experiments resulted in higher SQX mineralization than reported in the literature. For both setups, the best process was the photo-Fenton (178.0 mg L-1 H2O2), for which over 90% of SQX was removed, over 50% mineralization, and bacterial growth inhibition less than 13%. In both set-ups, the presence or absence of radiation was equally important for sulfaquinoxaline oxidation; however, the degradation rates at the pilot plant were between two to four times higher than the obtained at the laboratory bench.

Influence of water washing treatment on Ulva prolifera-derived biochar properties and sorption characteristics of ofloxacin

The influences of water washing treatment on the properties of Ulva prolifera-derived biochar (U.P-biochar) and its sorption characteristics of ofloxacin (OFL) were investigated. The results showed that the water washing treatment significantly changed the physiochemical structures of U.P-biochars, and improved the sorption capacity of OFL. The sorption capacity of OFL by U.P-biochar was closely dependent on pyrolysis temperature (200-600 °C) and equilibrium solution pH (3-11). Different sorption mechanisms (e.g. cation exchange, electrostatic attraction, H-bond and cationic-π and π-π interactions) were dominant for specific U.P-biochars under various pH regions (acidic, neutral and alkaline). Moreover, the unwashed and washed U.P-biochars prepared at 200 °C (BC200 and BCW200) showed a higher sorption capacity of OFL at pH = 7. The two-compartment first-order model provided an appropriate description of the sorption kinetics of OFL by BC200 and BCW200 (R2 > 0.98), which revealed that the contribution ratios between the fast and slow sorption compartments (ffast/fslow, 1.55 for BC200 and 1.25 for BCW200) reduced after water washing treatment of U.P-biochar. The values of n for the Freundlich model were less than 1, which demonstrated that the sorption of OFL by BC200 and BCW200 was favourable and nonlinear. Also, the sorption of OFL by BC200 and BCW200 increased with an increase in solution temperature and the sorption process was spontaneous and endothermic. This study provides valuable information for being a primary consideration in the production and application of U.P-biochar.

Electrospun Functional Nanofiber Membrane for Antibiotic Removal in Water: Review

As a new kind of water pollutant, antibiotics have encouraged researchers to develop new treatment technologies. Electrospun fiber membrane shows excellent benefits in antibiotic removal in water due to its advantages of large specific surface area, high porosity, good connectivity, easy surface modification and new functions. This review introduces the four aspects of electrospinning technology, namely, initial development history, working principle, influencing factors and process types. The preparation technologies of electrospun functional fiber membranes are then summarized. Finally, recent studies about antibiotic removal by electrospun functional fiber membrane are reviewed from three aspects, namely, adsorption, photocatalysis and biodegradation. Future research demand is also recommended.

A ratiometric nanoprobe based on carboxylated graphitic carbon nitride nanosheets and Eu3+ for the detection of tetracyclines

A convenient and rapid method that combines a fluorescent nanoprobe based on C-g-C₃N₄-Eu³⁺ with a smartphone and test paper has been developed for the in situ detection of tetracyclines.

Recent advancement in remediation of synthetic organic antibiotics from environmental matrices: Challenges and perspective

Continuous discharge and persistence of antibiotics in aquatic ecosystem is identified as emerging environment health hazard. Partial degradation and inappropriate disposal induce appearance of diverse antibiotic resistant genes (ARGs) and bacteria, hence their execution is imperative. Conventional methods including waste water treatment plants (WWTPs) are found ineffective for the removal of recalcitrant antibiotics. Therefore, constructive removal of antibiotics from environmental matrices and other alternatives have been discussed. This review summarizes present scenario and removal of micro-pollutants, antibiotics from environment. Various strategies including physicochemical, bioremediation, use of bioreactor, and biocatalysts are recognized as potent antibiotic removal strategies. Microbial Fuel Cells (MFCs) and biochar have emerged as promising biodegradation processes due to low cost, energy efficient and environmental benignity. With higher removal rate (20-50%) combined/ hybrid processes seems to be more efficient for permanent and sustainable elimination of reluctant antibiotics.

Amine-functionalized metal–organic framework integrated bismuth tungstate (Bi2WO6/NH2-UiO-66) composite for the enhanced solar-driven photocatalytic degradation of ciprofloxacin molecules

The Bi2WO6/NH2-UiO-66 composite with Z-Scheme heterojunction formation offered efficient charge separation and strong redox property towards ciprofloxacin degradation under solar light irradiation.

Enhanced photocatalytic degradation of gaseous toluene and liquidus tetracycline by anatase/rutile titanium dioxide with heterophase junction derived from materials of Institut Lavoisier-125(Ti): Degradation pathway and mechanism studies

Anatase/rutile titanium dioxide (TiO₂) with heterophase junction and large Brunauer-Emmett-Teller (BET) specific surface area (50.1 m² g^-1) is successfully synthesized by calcinating Materials of Institut Lavoisier-125(Ti) (MIL-125(Ti)) with 30% O₂/Ar at the temperature of 600 °C (M-O-600). Several techniques are used to examine the physicochemical, photoelectrochemical and optical properties of samples, and their photocatalytic performances are evaluated by photodegradation of gaseous toluene and liquidus tetracycline (TC) under visible light illumination. It is found that the calcination temperature has significant influence on the crystal structure and physicochemical parameters of TiO₂. The weight fractions of rutile and anatase TiO₂ of M-O-600 are approximately 0.7 and 0.3, which displays outstanding photocatalytic activity. Through the construction of heterophase junction, M-O-600 has better oxygen adsorption and higher density of localized states, which effectively promotes the generation of superoxide radical (·O₂^-) and hydroxyl radical (·OH) species. In-situ infrared spectra indicate that toluene is oxidized to benzyl alcohol, benzaldehyde and benzoic acid in turn and then oxidized to formic acid and acetic acid before eventually degraded into H₂O and CO₂. Gas chromatography-mass spectrometry (GC-MS) is also used to further investigate the degradation pathway of toluene. Degradation pathway and mechanism of TC are studied by liquid chromatography-tandem mass spectrometry (LC-MS). Moreover, three-dimensional excitation-emission matrix fluorescence spectroscopy (3D EEMs) and total organic carbon (TOC) show that TC can be effectively mineralized through a series of reactions by M-O-600 during photocatalysis.

The hybrid system successfully to consisting of activated sludge and biofilter process from hospital wastewater: Ecotoxicological study

This article aimed to demonstrate solution hospital wastewater due to more consumption of antibiotics, public concern has been significantly increased for usage, fates and occurrences of these emerging compounds in the environments and biota. Therefore, it does need more discoveries about occurrences and new treatment methods. Since the conventional treatment methods are low efficient on antibiotics, integration and combination of biological systems together or with an additional process has been shown that provided a better result. However, here, the potential of a full scale combined treating system with activated sludge-scoria biofilter (ASSB) was investigated for removal of ceftriaxone (CEF) and amoxicillin (AMX). To determine the potential biodegradability of proposed system, the solid-water distribution coefficient (K_d) was calculated. Overally, 118 samples were collected from three points; wastewater entering, exiting the activated sludge, and exiting the biofilter. To determine the amount of CEF and AMX antibiotics, the samples were analyzed using HPLC-UV. The results showed that the activated sludge system were able to eliminate the AMX and CEF antibiotics about 70.36 and 84.49%, respectively. In compare to activated sludge, the average mean of ASSB system for the removal efficiency were 87.53% (for AMX) and 93.17% (for CEF), respectively. As a result, it can be found that the efficiency of the combined activated sludge-biofilter system in removing of the low levels of antibiotics was more than individual activated system. The result of K_d revealed that AMX (with a K_d about 0.172) has lower tendency to biomass rather than CEF (with a K_d about 0.512). The ecological toxicity assessment guaranteed there is no risk for fish and daphnia when the activated sludge and also ASSB effluents to be discharged into the environment even without any diluting.

Conventional and emerging technologies for removal of antibiotics from wastewater

Antibiotics and pharmaceuticals related products are used to enhance public health and quality of life. The wastewater that is produced from pharmaceutical industries still contains noticeable amount of antibiotics, and this has remained one of the major environmental problems facing public health. The conventional wastewater remediation approach employed by the pharmaceutical industries for the antibiotics wastewater removal is unable to remove the antibiotics completely. Besides, municipal and livestock wastewater also contain unmetabolized antibiotics released by human and animal, respectively. The antibiotic found in wastewater leads to antibiotic resistance challenges, also emergence of superbugs. Currently, numerous technological approaches have been developed to remove antibiotics from the wastewater. Therefore, it was imperative to critically review the weakness and strength of these current advanced technological approaches in use. Besides, the conventional methods for removal of antibiotics such as Klavaroti et al., Homem and Santos also discussed. Although, membrane treatment is discovered as the ultimate choice of approach, to completely remove the antibiotics, while the filtered antibiotics are still retained on the membrane. This study found, hybrid processes to be the best solution antibiotics removal from wastewater. Nevertheless, real-time monitoring system is also recommended to ascertain that, wastewater is cleared of antibiotics.

Removal of sulfamethazine and Cu2+ by Sakaguchia cladiensis A5: Performance and transcriptome analysis

To reduce the potential risks of contamination of antibiotics and heavy metals to ecological environment and human safety, biological removal of these composite pollutants is the focus of much study. One previously identified isolate, Sakaguchia cladiensis A5, was used to decompose sulfamethazine (SMZ) and adsorb Cu²⁺. The ability of A5 to remove SMZ was enhanced by pre-induced culture, which reached 49.8% on day 9. The removal of SMZ could be also increased to 37.6% on day 3 in the presence of Cu²⁺, but only to 12.2% in the system without Cu²⁺. The biosorption of Cu²⁺ mainly occurred on the cell walls, while the biodegradation of SMZ was inside the cells. By comparative transcriptome analysis for A5, 1270 and 2220 differentially expressed genes (DEGs) were identified after treating single SMZ and SMZ/Cu²⁺, respectively. The Gene expression pattern analysis suggested a suppression of transcriptional changes in A5 responding to SMZ/Cu²⁺ as compared to under the sole stress of SMZ. The DEGs functional enrichment analysis suggested that the antioxidant and sulfate assimilation pathways played a key role on SMZ biodegradation and Cu²⁺ biosorption. The DEGs of proteins CAT, PRDX5, SAT, and CYSC were up-regulated to facilitate the resistance of A5 against oxidative toxicity of Cu²⁺. Moreover, the protein MET30 activated by Cu²⁺ was also overexpressed to promote the transmembrane transport of SMZ, such that A5 could decompose SMZ more effectively in SMZ/Cu²⁺ system. The results of this study would provide new insights into the mechanism of biodegradation and biosorption of SMZ/Cu²⁺.

Sorption behavior and mechanism of oxytetracycline from simulated wastewater by Amberlite IR-120 resin

The adsorption of oxytetracycline from aqueous solution by the resin Amberlite IR 120 was studied. The effect of different experimental parameters such as contact time, initial concentration of OTC 40-200 mg/l, initial pH 2-12 of aqueous solution, adsorbent dose 0.5-3 g/l, and stirring speed 100-700 rpm on the adsorption of OTC were investigated. The kinetic adsorption experimental results were analyzed using pseudo-first order, pseudo-second order and Elovich kinetic models. The adsorption process was found to follow a pseudo-second order kinetic model and the corresponding rate constants were obtained. A film-pore diffusion (FPD) mass transfer model has been developed to predict the concentration distribution in the fluid phase, based on the external mass transfer coefficient and the effective diffusion coefficient. The values of the external mass transfer coefficient (β_L) and effective diffusion coefficient (D_eff) were found to decrease with increasing OTC concentration. The comparison between the experimental and the theoretical curves allowed us to note that the film-pore diffusion mass transfer model gave a good agreement with the experimental data for all the values of initial OTC concentration.

Investigating the relationship between extended spectrum β-lactamase producing Escherichia coli in the environment and food chains with the presence of this infection in people suspected of septicemia: Using the fuzzy set qualitative comparative analysis

PROPOSE

Among antibiotic resistance cases, resistance to β-lactam antibiotics is a major concern for the treatment of microbial infections. Furthermore, the prevalence of extended-spectrum β-lactamases (ESBL) Escherichia coli (E. coli) in environment, food, and human resources of Iran has increased over the past few years. This study aimed to predict the relationship between the prevalence of ESBL E. coli in the environment and the food chains with the presence of this infection in people suspected of septicemia using fuzzy set qualitative comparative analysis model.

METHODS

In this analytical cross sectional study samples were collected from the environment (hospital sewage, downstream and upstream urban sewage, and slaughterhouse sewage), food (chicken), and human chains (people suspected of septicemia) in Tehran province, Iran. This study was conducted from September to February 2019 and the prevalence of ESBL E. coli was calculated in each resource. Then, the relationship between the prevalence of ESBL E. coli in the environment and food chains and its prevalence in the human chain was predicted using the fuzzy set qualitative comparative analysis.

RESULTS

The results showed the prevalence of ESBL E. coli in those suspected of septicemia in September, October, November, December, January and February was 58.1%, 60%, 33.3%, 100%, 43%, and 57.8%, respectively. Also, the results of the fuzzy set qualitative comparative analysis indicated hospital wastewater and chicken contamination with ESBL E. coli were the main causes of contamination with ESBL E. coli in people suspected of septicemia.

CONCLUSIONS

According to the results of this study, if there is a contamination of hospital wastewater and chickens in an area, it can be claimed that people suspected of septicemia are infected with ESBL E. coli, and the percentage of this contamination can be high. On the other hand, controlling ESBL E. coli in hospital wastewater (environmental chain) and chickens (food chain) can prevent contamination in people with suspected septicemia.

Highly efficient chloramphenicol degradation by UV and UV/H2 O2 processes based on LED light source

In this study, UV-LED was employed as a novel light source to investigate the degradation of a representative antibiotic compound, chloramphenicol (CAP), in the absence or presence of H₂ O₂ . The UV-LED irradiation showed a higher capability for degradation of CAP than conventional UV-Hg vapor lamps. Effects of the initial CAP concentration, UV wavelength, and light intensity on the degradation of CAP by UV-LED were evaluated. Introduction of H₂ O₂ evidently enhanced the degradation efficiency of CAP due to the production of reactive hydroxyl radicals. Results showed that the UV-LED/H₂ O₂ removed CAP by up to 95% within 60 min at pH 5.0, which was twice as that achieved by the UV-LED alone. The degradation products were identified to propose plausible degradation pathways. Moreover, the formation potentials of typical carbonaceous disinfection by-products (C-DBPs) and nitrogenous disinfection by-products (N-DBPs) were assessed for the CAP polluted water treated by the UV-LED alone and UV-LED/H₂ O₂ processes. Results indicate unintended formation of certain DBPs, thereby highlighting the importance of health risk assessments before practical application. This study opens a new avenue for developing environment-friendly and high-performance UV-LED photocatalytic reactors for abatement of CAP pollution in water. PRACTITIONER POINTS: UV-LED bore higher capability to degrade CAP than low-pressure Hg lamp. The optimal performance to degrade CAP can be achieved at the UV wavelength of 280 nm. The degradation efficiency under UV-LED/H₂ O₂ process was double of that under UV-LED process. TCM, DCAN, and TCNM formation were higher under the existence of UV-LED radiation. The addition of H₂ O₂ had greater influence on the formation of DCAcAm than the introduction of UV-LED.

Chlorpyrifos removal: Nb/boron-doped diamond anode coupled with solid polymer electrolyte and ultrasound irradiation

Chlorpyrifos is an organophosphorus insecticide, acaricide and miticide used worldwide for the control of soil-borne insect pests. It must be considered as a substance of growing concern, given its use, toxicity, environmental occurrence, and potential for regional to long-range atmospheric transport. Considering the incomplete removal attained by conventional water treatment processes, we investigated the efficiency of electrolytic radicals production and sonoelectrolysis on the degradation of the pesticide. The treatment has been conducted in a novel electrochemical reactor, equipped with a boron-doped diamond anode and a solid polymer electrolyte (SPE). Different current intensity and times have been tested and coupled with sonication at 40 kHz. Up to 69% of chlorpyrifos was completely removed in 10 min by electrolysis operated at 0.1 mA, while 12.5% and 5.4% was converted into the treatment intermediates 3,5,6-trichloro-2-pyridinol (TCP) and diethyl (3,5,6-trichloropyridin-2-yl) phosphate, respectively. Ultrasound irradiation did not enhance the removal efficiency, likely due to mass transport limitations, while the energy consumption increased from 8.68∙10- 6 to 9.34∙10- 4 kWh µg- 1 removed. Further research is encouraged, given the promising processing by the SPE technology of low conductivity solutions, as pharmaceuticals streams, as well as the potential for water and in-situ groundwater remediation from different emerging pollutants as phytosanitary and personal care products.

Photocatalytic degradation of cephalexin by UV activated persulfate and Fenton in synthetic wastewater: optimization, kinetic study, reaction pathway and intermediate products

We used Low pressure mercury vapor lamp activated of Sodium Persulfate (UV/SPS) and Fenton processes in two separate reactors to comparison of cephalexin (CPX) degradation in aqueous solution. The effect of pH, initial concentration of SPS, concentration of CPX, concentration of H2O2 and concentration of Fe2+ on the degradation of CPX were investigated. The residue of CPX and metabolites were determined by HPLC and GC/MS. The Total Organic Carbon (TOC) analysis was utilized for surveying the mineralization of CPX. Biodegradability of CPX in both advanced oxidation processes was evaluated by BOD5/COD in optimum condition. The results indicated that the maximum CPX removal was obtained at pH 3, H2O2 3 mM, concentration of initial CPX 10 mg/L and by increasing the doses of SPS from 0.1 to 0.2 mM, the degradation of CPX was enhanced. In this study, the most important factors for AOP efficiency was concentration of initial CPX; and then pH in UV/SPS and H2O2 in Fenton processes. The TOC measurements indicate that the UV/SPS and Fenton can efficiently mineralize CPX. CPX removed enough to achieve suitable biodegradability for a further biological process. Too, analysis of generated intermediates during the degradation of CPX was conducted by GC/MS method and a degradation pathway was proposed.

Elimination of representative fluoroquinolones, penicillins, and cephalosporins by solar photo-Fenton: degradation routes, primary transformations, degradation improvement by citric acid addition, and antimicrobial activity evolution

This work studies the degradation of seven representative antibiotics (ciprofloxacin, norfloxacin, levofloxacin, oxacillin, cloxacillin, cefalexin, and cefadroxil) by solar photo-Fenton process. The removal of antibiotics by the individual components (i.e., light, H₂O₂, or Fe (II)) and the complete photochemical system (light/H₂O₂/Fe (II)) was initially evaluated. Then, the effect of citric acid addition to the photo-Fenton system was assessed. In the third place, the primary transformation products for two illustrative cases (ciprofloxacin and oxacillin treated by photo-Fenton) were determined. Also, photo-Fenton in the presence of citric acid was applied to remove antibiotics from a simulated hospital wastewater. It was found that the solar light component induced degradation of ciprofloxacin, norfloxacin, and levofloxacin, but the rest of the considered antibiotics were not reduced by photolysis. In turn, the photo-Fenton system showed a degrading action on all the tested antibiotics. The addition of citric acid to the system significantly increased the removal of antibiotics. Initial degradation products indicated that hydroxyl radical attacked moieties of antibiotics responsible for their antimicrobial activity. Finally, the treatment of hospital wastewater evidenced the high potentiality of photo-Fenton process for degrading antibiotics in aqueous matrices containing elevated concentrations of citric acid.

Kinetic study on the sorption and degradation of antibiotics in the estuarine water: an evaluation based on single and multiple reactions

It is important to study the fate and transport of antibiotics in aquatic environments to reveal their pollution status. The premise behind fate and transport studies is to evaluate the reaction processes of the target antibiotics. However, available research on the environmental behaviors of antibiotics in certain natural waters, such as estuarine water, is scarce. In this study, single reactions such as sorption, biodegradation, and photolysis and multiple degradation reactions of sulfamethoxazole (SMX), trimethoprim (TMP), and ciprofloxacin (CIP) in the estuarine water were studied. The sorption rates of the target antibiotics in the estuarine water-sediment system were very fast, and the sorption amounts varied among sediments and antibiotics. Hydrolysis did not contribute to the degradation of the target antibiotics. Biodegradation had a low contribution to the degradation of the target antibiotics in the estuarine water. In comparison, photolysis was the dominant degradation process for SMX, TMP, and CIP. The rates of photolysis of the tested antibiotics in the estuarine water were greater than those in pure water; thereby, indicating photolysis of these antibiotics was more prone to occur in the estuarine water. In the multiple degradation experiments, it was found that there may be synergistic effects between the single degradation processes. Thus, the aqueous concentrations of antibiotics decreased rapidly by sorption after entering the estuarine water and then decreased relatively slowly by photolysis and biodegradation. This study provides information for evaluating the environmental behaviors of antibiotics in estuarine environments.

Reclaimed wastewater as a viable water source for agricultural irrigation: A review of food crop growth inhibition and promotion in the context of environmental change

The geographical and temporal distribution of precipitation has and is continuing to change with changing climate. Shifting precipitation will likely require adaptations to irrigation strategies, and because 35% of rainfed and 60% of irrigated agriculture is within 20 km of a wastewater treatment plant, we expect that the use of treated wastewater (e.g., reclaimed wastewater) for irrigation will increase. Treated wastewater contains various organic and inorganic substances that may have beneficial (e.g., nitrate) or deleterious (e.g., salt) effects on plants, which may cause a change in global food productivity should a large change to treated wastewater irrigation occur. We reviewed literature focused on food crop growth inhibition or promotion resulting from exposure to xenobiotics, engineered nanoparticles, nitrogen, and phosphorus, metals, and salts. Xenobiotics and engineered nanoparticles, in nearly all instances, were detrimental to crop growth, but only at concentrations much greater than would be currently expected in treated wastewater. However, future changes in wastewater flow and use of these compounds and particles may result in phytotoxicity, particularly for xenobiotics, as some are present in wastewater at concentrations within approximately an order of magnitude of concentrations which caused growth inhibition. The availability of nutrients present in treated wastewater provided the greatest overall benefit, but may be surpassed by the detrimental impact of salt in scenarios where either high concentrations of salt are directly deleterious to plant development (rare) or in scenarios where soils are poorly managed, resulting in soil salt accumulation.

Tricks and tracks in removal of emerging contaminants from the wastewater through hybrid treatment systems: A review

In recent years, many biological and physicochemical treatment technologies have been investigated for the removal of the emerging contaminants (ECs) from the wastewater matrix. However, due to the deficiency of these treatments to completely degrade the ECs in wastewater, hybrid systems were explored using the distinguishing removal potential of the different treatment processes. This review gives an insight on such hybrid systems combining several physical, chemical and biological treatments for the fast and eco-efficient removal of ECs from wastewater. Most of the hybrid systems have applied biological treatments first and then physical or chemical treatments. The hybrid system of membrane bioreactor (MBR) followed by membrane filtrations (RO/NF) effectively removed a suite of ECs such as pharmaceuticals, beta blockers, pesticides and EDCs. Some of the hybrid systems of constructed wetlands and waste stabilization ponds showed promising potential for the biosorptive removal of pharmaceuticals and some beta blockers. The hybrid systems combining activated sludge process and physical processes such as ultrafiltration (UF), reverse osmosis (RO) and gamma radiations are considered as the cost effective technologies and had better removal of trace organic pollutants. The hybrid system of MBR coupled with UV oxidation, activated carbon and ultrasound, and ozonation followed by ultrasounds, completely degraded some ECs and many pharmaceuticals. The review also synthesizes the trend followed by the hybrid system processes for the removal of various categories of ECs. The future research directions for the ECs removal utilizing hybrid nanocomposites and green sustainable technology have been suggested.

Degradation of Veterinary Antibiotics in Swine Manure via Anaerobic Digestion

Antibiotic-resistant microorganisms are drawing a lot of attention due to their severe and irreversible consequences on human health. The animal industry is considered responsible in part because of the enormous volume of antibiotics used annually. In the current research, veterinary antibiotic (VA) degradation, finding the threshold of removal and recognizing the joint effects of chlortetracycline (CTC) and Tylosin combination on the digestion process were studied. Laboratory scale anaerobic digesters were utilized to investigate potential mitigation of VA in swine manure. The digesters had a working volume of 1.38 L (in 1.89-L glass jar), with a hydraulic retention time (HRT) of 21 days and a loading rate of 1.0 g-VS L-1 d-1. Digesters were kept at 39 ± 2 °C in incubators and loaded every two days, produced biogas every 4 days and digester pH were measured weekly. The anaerobic digestion (AD) process was allowed 1.5 to 2 HRT to stabilize before adding the VAs. Tests were conducted to compare the effects of VAs onto manure nutrients, volatile solid removal, VA degradation, and biogas production. Concentrations of VA added to the manure samples were 263 to 298 mg/L of CTC, and 88 to 263 mg/L of Tylosin, respectively. Analysis of VA concentrations before and after the AD process was conducted to determine the VA degradation. Additional tests were also conducted to confirm the degradation of both VAs dissolved in water under room temperature and digester temperature. Some fluctuations of biogas production and operating variables were observed because of the VA addition. All CTC was found degraded even only after 6 days of storage in water solution; thus, there was no baseline to estimate the effects of AD. As for Tylosin, 100% degradation was observed due to the AD (removal was 100%, compared with 24-40% degradation observed in the 12-day water solution storage). Besides, complete Tylosin degradation was also observed in the digestate samples treated with a mixture of the two VAs. Lastly, amplicon sequencing was performed on each group by using the 50 most variable operational taxonomic units (OTUs)s and perfect discriminations were detected between groups. The effect of administration period and dosage of VAs on Phyla Firmicutes Proteobacteria, Synergistetes and Phylum Bacteroides was investigated. These biomarkers' abundance can be employed to predict the sample's treatment group.

Calcium alginate/activated carbon/humic acid tri-system porous fibers for removing tetracycline from aqueous solution

In this study, activated carbon and humic acid powder were fixed by the cross-linking reaction of sodium alginate. Calcium alginate/activated carbon/humic acid (CAH) tri-system porous fibers were prepared by the wet spinning method and freeze-dried for the removal of tetracycline in aqueous solution. Subsequently, the morphology and structure of CAH fibers were measured by scanning electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method. The effect of pH, contact time, temperature and other factors on adsorption behavior were analyzed. The Langmuir and Freundlich isotherm models were used to fit tetracycline adsorption equilibrium data. The dynamics data were evaluated by the pseudo-second-order model, the pseudo-second-order model and the intraparticle diffusion model. Thermodynamic study confirmed that the adsorption of tetracycline on CAH fibers was a spontaneous process.

Cellulose nanocrystals/graphene oxide composite for the adsorption and removal of levofloxacin hydrochloride antibiotic from aqueous solution

Residual antibiotics in water are often persistent organic pollutants. The purpose of this study was to prepare a cellulose nanocrystals/graphene oxide composite (CNCs-GO) with a three-dimensional structure for the removal of the antibiotic levofloxacin hydrochloride (Levo-HCl) in water by adsorption. The scanning electron microscope, Fourier transform infrared (FT-IR), energy-dispersive spectroscopy, X-ray photoelectron spectroscopy and other characterization methods were used to study the physical structure and chemical properties of the CNCs-GO. The three-dimensional structure of the composite material rendered a high surface area and electrostatic attraction, resulting in increased adsorption capacity of the CNCs-GO for Levo-HCl. Based on the Box-Behnken design, the effects of different factors on the removal of Levo-HCl by the CNCs-GO were explored. The composite material exhibited good antibiotic adsorption capacity, with a removal percentage exceeding 80.1% at an optimal pH of 4, the adsorbent dosage of 1.0 g l^-1, initial pollutant concentration of 10.0 mg l^-1 and contact time of 4 h. The adsorption isotherm was well fitted by the Sips model, and kinetics studies demonstrated that the adsorption process conformed to a quasi-second-order kinetics model. Consequently, the as-synthesized CNCs-GO demonstrates good potential for the effective removal of antibiotics such as levofloxacin hydrochloride from aqueous media.

Green preparation of activated carbon from pomegranate peel coated with zero-valent iron nanoparticles (nZVI) and isotherm and kinetic studies of amoxicillin removal in water

In present research, the activated carbon was prepared by a green approach from pomegranate peel coated with zero-valent iron nanoparticles (AC-nZVI) and developed as adsorbent for the removal of amoxicillin from aqueous solution. The physicochemical properties of the AC-nZVI were investigated using XRD, FTIR, and FESEM techniques. The optimal values of the parameters for the best efficiency (97.9%) were amoxicillin concentration of 10 mg/L, adsorbent dose of 1.5 g/L, time of 30 min, and pH of 5, respectively. The adsorption equilibrium and kinetic data were fitted with the Langmuir monolayer isotherm model (qmax 40.282 mg/g, R² 0. 0.999) and pseudo-first order kinetics (R² 0.961). The reusability of the adsorbent also revealed that the adsorption efficiency decreased from 83.54 to 50.79% after five consecutive repetitions. Overall, taking into account the excellent efficiency, availability, environmental friendliness, and good regeneration, AC-nZVI can be introduced as a promising absorbent for amoxicillin from aquatic environments.

Nanoparticle-templated conversion of glucose to a high surface area biocarbon for the removal of organic pollutants in water

While extensive work has been done on the generation of adsorbents by carbonization of large polymeric structures, few works are currently available for the use of monomeric carbon molecules as precursors during carbonization. In this work we report the formation of a carbon adsorbent material from the carbonization of glucose in the presence of zinc oxide (ZnO) nanoparticle templates. Carbonization at 1,000 °C under inert atmosphere yields a product with Brunauer-Emmett-Teller (BET) surface area of 1,228.19 m²/g and 14.77 nm average pore diameter. Adsorption capacities against methylene blue, 2-naphthol and bisphenol-A at pH 7 were found to be 539 mg/g, 737 mg/g and 563 mg/g, respectively. Our material demonstrates a strong fit with the Langmuir isotherm, and adsorption kinetics show regression values near unity for the pseudo-second order kinetic model. A flow adsorption column was implemented for the remediation of tap water containing 20 mg/L methylene blue and found to quantitatively purify 11.5 L of contaminated water.

Evolution of antibiotic resistance at low antibiotic concentrations including selection below the minimal selective concentration

Determining the selective potential of antibiotics at environmental concentrations is critical for designing effective strategies to limit selection for antibiotic resistance. This study determined the minimal selective concentrations (MSCs) for macrolide and fluoroquinolone antibiotics included on the European Commissionʼs Water Framework Directive’s priority hazardous substances Watch List. The macrolides demonstrated positive selection for ermF at concentrations 1–2 orders of magnitude greater (>500 and <750 µg/L) than measured environmental concentrations (MECs). Ciprofloxacin illustrated positive selection for intI1 at concentrations similar to current MECs (>7.8 and <15.6 µg/L). This highlights the need for compound specific assessment of selective potential. In addition, a sub-MSC selective window defined by the minimal increased persistence concentration (MIPC) is described. Differential rates of negative selection (or persistence) were associated with elevated prevalence relative to the no antibiotic control below the MSC. This increased persistence leads to opportunities for further selection over time and risk of human exposure and environmental transmission.

Stanton et al. determine the minimal selective concentrations for macrolide and fluoroquinolone antibiotics and describe a selective window defined by the minimal increased persistence concentration. These assessments and thresholds allow for better assessment of potential selection for antibiotic resistance and the risks of human exposure and environmental transmission.

Characterization of activated bentonite clay mineral and the mechanisms underlying its sorption for ciprofloxacin from aqueous solution

The presence of emerging pollutants such as hazardous chemicals, pharmaceuticals, pesticides, and endocrine-disrupting chemicals in water sources is a serious concern to the environment and human health. Thus, this study focused on exploring the interaction mechanisms between ciprofloxacin (CIP) (antibiotic) and clay (a low-cost adsorbent) during sorption process. Acid activation technique was opted for modifying natural bentonite (NB) to enhance the adsorptive removal of CIP from water. The BET surface area analysis revealed that acid-activated bentonite (AAB) possessed more than two fold higher surface area as compared to NB. Combining pH_zpc measurements, effect of solution pH and CIP speciation revealed that CIP sorption onto bentonite is highly dependent on solution pH. Kinetic studies confirmed that CIP sorption mechanism was chemisorption which included ion-exchange and surface complexation mechanisms. The mechanism of CIP sorption onto AAB was successfully explored with the assistance of characterization techniques. Maximal monolayer sorption capacity of AAB was found to be 305.20 mg/g, compared to 126.56 mg/g for NB. Reusability studies demonstrated that AAB could be reused successfully up to 5 cycles. Furthermore, column studies showed satisfactory results confirming that AAB can be successfully used in continuous mode for practical applications.

Performance of microbial fuel cell for treating swine wastewater containing sulfonamide antibiotics

The proper treatment of swine wastewater with relatively high concentrations of antibiotics is very important to protect environmental safety and human health. Microbial fuel cell (MFC) technology shows much promise for removing pollutants and producing electricity simultaneously. A double-chamber MFC was investigated in this study. Synthetic swine wastewater with the addition of sulfonamides was used as the fuels in the anode chamber. Results indicated that COD could be effectively removed (>95%) and virtually not affect by the presence of sulfonamides in the MFC. A stable voltage output was also observed. The removal efficiencies of sulfamethoxazole (SMX), sulfadiazine (SDZ), and sulfamethazine (SMZ) in the MFC were in the 99.46-99.53%, 13.39-66.91% and 32.84-67.21% ranges, respectively. These totals were higher than those reported for a traditional anaerobic reactor. Hence, MFC revealed strong resistance to antibiotic toxicity and high potential to treat swine wastewater with antibiotics.