Silk proteins for biomedical applications: Bioengineering perspectives

Surface-Functionalized Silk Fibroin Films as a Platform To Guide Neuron-like Differentiation of Human Mesenchymal Stem Cells

Surface interactions at the biomaterial-cellular interface determine the proliferation and differentiation of stem cells. Manipulating such interactions through the surface chemistry of scaffolds renders control over directed stem cell differentiation into the cell lineage of interest. This approach is of central importance for stem cell-based tissue engineering and regenerative therapy applications. In the present study, silk fibroin films (SFFs) decorated with integrin-binding laminin peptide motifs (YIGSR and GYIGSR) were prepared and employed for in vitro adult stem cell-based neural tissue engineering applications. Functionalization of SFFs with short peptides showcased the peptide sequence and nature of functionalization-dependent differentiation of bone marrow-derived human mesenchymal stem cells (hMSCs). Intriguingly, covalently functionalized SFFs with GYIGSR hexapeptide (CL2-SFF) supported hMSC proliferation and maintenance in an undifferentiated pluripotent state and directed the differentiation of hMSCs into neuron-like cells in the presence of a biochemical cue, on-demand. The observed morphological changes were further corroborated by the up-regulation of neuronal-specific marker gene expression (MAP2, TUBB3, NEFL), confirmed through semiquantitative reverse-transcription polymerase chain reaction (RT-PCR) analysis. The enhanced proliferation and on-demand directed differentiation of adult stem cells (hMSCs) by the use of an economically viable short recognition peptide (GYIGSR), as opposed to the integrin recognition protein laminin, establishes the potential of SFFs for neural tissue engineering and regenerative therapy applications.

Silk fibroin membrane used for guided bone tissue regeneration

With the aim to develop a novel membrane with an appropriate mechanical property and degradation rate for guided bone tissue regeneration, lyophilized and densified silk fibroin membrane was fabricated and its mechanical behavior as well as biodegradation property were investigated. The osteoconductive potency of the silk fibroin membranes were evaluated in a defect rabbit calvarial model. Silk fibroin membrane showed the modulated biodegradable and mechanical properties via ethanol treatment with different concentration. The membrane could prevent soft tissue invasion from normal tissue healing, and the amounts of new bone and defect closure with silk fibroin membrane were similar to those of commercially available collagen membrane.

Major Ampullate Spider Silk with Indistinguishable Spidroin Dope Conformations Leads to Different Fiber Molecular Structures

To plentifully benefit from its properties (mechanical, optical, biological) and its potential to manufacture green materials, the structure of spider silk has to be known accurately. To this aim, the major ampullate (MA) silk of Araneus diadematus (AD) and Nephila clavipes (NC) has been compared quantitatively in the liquid and fiber states using Raman spectromicroscopy. The data show that the spidroin conformations of the two dopes are indistinguishable despite their specific amino acid composition. This result suggests that GlyGlyX and GlyProGlyXX amino acid motifs (X = Leu, Glu, Tyr, Ser, etc.) are conformationally equivalent due to the chain flexibility in the aqueous environment. Species-related sequence specificity is expressed more extensively in the fiber: the β-sheet content is lower and width of the orientation distribution of the carbonyl groups is broader for AD (29% and 58°, respectively) as compared to NC (37% and 51°, respectively). β-Sheet content values are close to the proportion of polyalanine segments, suggesting that β-sheet formation is mainly dictated by the spidroin sequence. The extent of molecular alignment seems to be related to the presence of proline (Pro) that may decrease conformational flexibility and inhibit chain extension and alignment upon drawing. It appears that besides the presence of Pro, secondary structure and molecular orientation contribute to the different mechanical properties of MA threads.

Tissue Regeneration: A Silk Road

Silk proteins are natural biopolymers that have extensive structural possibilities for chemical and mechanical modifications to facilitate novel properties, functions, and applications in the biomedical field. The versatile processability of silk fibroins (SF) into different forms such as gels, films, foams, membranes, scaffolds, and nanofibers makes it appealing in a variety of applications that require mechanically superior, biocompatible, biodegradable, and functionalizable biomaterials. There is no doubt that nature is the world's best biological engineer, with simple, exquisite but powerful designs that have inspired novel technologies. By understanding the surface interaction of silk materials with living cells, unique characteristics can be implemented through structural modifications, such as controllable wettability, high-strength adhesiveness, and reflectivity properties, suggesting its potential suitability for surgical, optical, and other biomedical applications. All of the interesting features of SF, such as tunable biodegradation, anti-bacterial properties, and mechanical properties combined with potential self-healing modifications, make it ideal for future tissue engineering applications. In this review, we first demonstrate the current understanding of the structures and mechanical properties of SF and the various functionalizations of SF matrices through chemical and physical manipulations. Then the diverse applications of SF architectures and scaffolds for different regenerative medicine will be discussed in detail, including their current applications in bone, eye, nerve, skin, tendon, ligament, and cartilage regeneration.

Further development of silk sericin as a biomaterial: comparative investigation of the procedures for its isolation from Bombyx mori silk cocoons

There is significant research dedicated to fibroin and sericin, the two major proteinaceous components of the silk threads produced by the domesticated silkworm, Bombyx mori. While fibroin is accepted as an established biomaterial, sericin (BMSS) has been largely neglected in this respect on the account of a hypothetical allergenic activity. Research over the past decade, including our previous study (Prog Biomater 2:14, 2013), demonstrated the biocompatibility of sericin and feasibility of its use as a biomaterial. However, the current procedures for isolating BMSS from the raw silk cocoons can only provide degraded proteins, where the size and distribution of their molecular masses are significantly altered. Based on the plausible assumption that such effects can have a negative impact on the properties of sericin as a biomaterial, in this study we investigated comparatively four different extraction procedures in order to find the method that would cause the least hydrothermal degradation of BMSS. The products resulting from commonly used procedures (extraction in boiling water, alkaline extraction, and extraction in autoclave) were compared to those resulting from aqueous extraction in mild conditions as described a long time ago by Anderlini. The molecular mass distribution in BMSS resulting from each procedure was examined by electrophoretic analysis performed on sodium dodecyl sulphate-polyacrylamide gel (SDS-PAGE), while the conformational changes pertaining to secondary structure of BMSS were evaluated by Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectrometry. The electrophoretograms indicated that the aqueous extraction in mild conditions conducted at 50 °C for durations up to 4 weeks, with/without stirring, afforded the least degraded BMSS. The infrared spectrometric analysis showed that BMSS resulting from the mild extraction method contained predominantly β-sheet conformations, while the more degradative methods (alkaline, autoclave) led to BMSS where the random-coil conformations were preferential. The long-duration aqueous extraction at 50 °C (but not at 60 °C) appeared as a valid option for obtaining BMSS products where the hydrothermally induced fragmentation of the polypeptidic components is minimized.

Chemically Functionalized Silk for Human Bone Marrow-Derived Mesenchymal Stem Cells Proliferation and Differentiation

To produce biocompatible, mechanically robust, and conductive materials for bone tissue engineering, chemical oxidation using sodium hyprochlorite (NaClO) was utilized to introduce carboxyl groups onto silk fibroin (SF). A final carboxyl content of 1.09 mM/g SF was obtained, corresponding to ∼47% of the primary hydroxymethyl groups on the silk. Interestingly, both infrared (IR) spectroscopy and circular dichroism (CD) spectra demonstrated that the resulting oxidized silk (OxSF) self-assembled into β-sheet structures under aqueous conditions and this contributed to the mechanical properties of the as-prepared silk-based scaffolds and the mineralized OxSF scaffolds (M-OxSF). The OxSF scaffolds had a compressive modulus of 211 ± 75 KPa in the hydrated state, 10 times higher than that of the SF scaffolds, and the modulus of the M-OxSF scaffolds was increased to 758 ± 189 KPa. Human bone marrow-derived mesenchymal stem cells (hMSCs) grown on the scaffolds during osteogenesis showed that the OxSF scaffolds supported the proliferation and differentiation of hMSCs in vitro.

Relationships between physical properties and sequence in silkworm silks

Silk has attracted widespread attention due to its superlative material properties and promising applications. However, the determinants behind the variations in material properties among different types of silk are not well understood. We analysed the physical properties of silk samples from a variety of silkmoth cocoons, including domesticated Bombyx mori varieties and several species from Saturniidae. Tensile deformation tests, thermal analyses, and investigations on crystalline structure and orientation of the fibres were performed. The results showed that saturniid silks produce more highly-defined structural transitions compared to B. mori, as seen in the yielding and strain hardening events during tensile deformation and in the changes observed during thermal analyses. These observations were analysed in terms of the constituent fibroin sequences, which in B. mori are predicted to produce heterogeneous structures, whereas the strictly modular repeats of the saturniid sequences are hypothesized to produce structures that respond in a concerted manner. Within saturniid fibroins, thermal stability was found to correlate with the abundance of poly-alanine residues, whereas differences in fibre extensibility can be related to varying ratios of GGX motifs versus bulky hydrophobic residues in the amorphous phase.

Exploration of the tight structural-mechanical relationship in mulberry and non-mulberry silkworm silks

The Bombyx mori silkworm is well known as it has been bred by our ancestors with mulberry tree leaves for thousands of years. However, Bombyx mori is not the only silkworm that can produce silk, many other kinds of silkworms can also make silks for commercial use. In this research, we compare the mechanical properties of five different commercial silk fibres including domesticated mulberry Bombyx mori, non-mulberry semi-domesticated eri Samia ricini, and wild tropical tasar Antheraea mylitta and muga Antheraea assamensis. The results demonstrate that the non-mulberry silk fibres have a relatively high extensibility as compared to the mulberry silk fibres. In the meantime, the non-mulberry silk fibres show comparatively unique toughness to the mulberry silk fibres. Synchrotron radiation FTIR microspectroscopy, synchrotron radiation wide angle X-ray diffraction, and Raman dichroism spectroscopy are used to analyze the structural differences among the five species of silk fibres comprehensively. The results clearly show that the mechanical properties of both mulberry and non-mulberry silk fibres are closely related to their structures, such as β-sheet content, crystallinity, and the molecular orientation along the fibre axis. This study aims to understand the differences in the structural and mechanical properties of different mulberry and non-mulberry silk fibres, which are of importance to the related research on understanding and utilizing the non-mulberry silk as a biomaterial. We believe these investigations not only provide insight into the biology of silk fibroins from the non-mulberry silkworms but also offer guidelines for further biomimetic investigations into the design and manufacture of artificial silk protein fibres with novel morphologies and associated material properties for future use in different fields like bioelectronics, biomaterials and biomedical devices.

Heterogeneity of Scaffold Biomaterials in Tissue Engineering

Tissue engineering (TE) offers a potential solution for the shortage of transplantable organs and the need for novel methods of tissue repair. Methods of TE have advanced significantly in recent years, but there are challenges to using engineered tissues and organs including but not limited to: biocompatibility, immunogenicity, biodegradation, and toxicity. Analysis of biomaterials used as scaffolds may, however, elucidate how TE can be enhanced. Ideally, biomaterials should closely mimic the characteristics of desired organ, their function and their in vivo environments. A review of biomaterials used in TE highlighted natural polymers, synthetic polymers, and decellularized organs as sources of scaffolding. Studies of discarded organs supported that decellularization offers a remedy to reducing waste of donor organs, but does not yet provide an effective solution to organ demand because it has shown varied success in vivo depending on organ complexity and physiological requirements. Review of polymer-based scaffolds revealed that a composite scaffold formed by copolymerization is more effective than single polymer scaffolds because it allows copolymers to offset disadvantages a single polymer may possess. Selection of biomaterials for use in TE is essential for transplant success. There is not, however, a singular biomaterial that is universally optimal.

Pigmented Silk Nanofibrous Composite for Skeletal Muscle Tissue Engineering

Skeletal muscle tissue engineering (SMTE) employs designed biomaterial scaffolds for promoting myogenic differentiation of myoblasts to functional myotubes. Oxidative stress plays a significant role in the biocompatibility of biomaterials as well as in the fate of myoblasts during myogenesis and is also associated with pathological conditions such as myotonic dystrophy. The inherent electrical excitability of muscle cells inspired the use of electroactive scaffolds for SMTE. Conducting polymers attracted the attention of researchers for their use in muscle tissue engineering. However, poor biocompatibility, biodegradability and development of oxidative stress associated immunogenic response limits the extensive use of synthetic conducting polymers for SMTE. In order to address the limitations of synthetic polymers, intrinsically electroactive and antioxidant silk fibroin/melanin composite films and electrospun fiber mats were fabricated and evaluated as scaffolds for promoting myogenesis in vitro. Melanin incorporation modulated the thermal stability, electrical conductivity of scaffolds, fiber alignment in electrospun mats and imparted good antioxidant properties to the scaffolds. The composite electrospun scaffolds promoted myoblast assembly and differentiation into uniformly aligned high aspect ratio myotubes. The results highlight the significance of scaffold topography along with conductivity in promoting myogenesis and the potential application of silk nanofibrous composite as electoractive platform for SMTE.

Soft implantable microelectrodes for future medicine: prosthetics, neural signal recording and neuromodulation

Implantable devices have provided various potential diagnostic options and therapeutic methods in diverse medical fields. A variety of hard-material-based implantable electrodes have been developed. However, several limitations for their chronic implantation remain, including mechanical mismatches at the interface between the electrode and the soft tissue, and biocompatibility. Soft-material-based implantable devices are suitable candidates for complementing the limitations of hard electrodes. Advances in microtechnology and materials science have largely solved many challenges, such as optimization of shape, minimization of infection, enhancement of biocompatibility and integration with components for diverse functions. Significant strides have also been made in mechanical matching of electrodes to soft tissue. In this review, we provide an overview of recent advances in soft-material-based implantable electrodes for medical applications, categorized according to their implantation site and material composition. We then review specific applications in three categories: neuroprosthetics, neural signal recording, and neuromodulation. Finally, we describe various strategies for the future development and application of implantable, soft-material-based devices.

Conducting polymer-silk biocomposites for flexible and biodegradable electrochemical sensors

Approaches to form flexible biosensors require strategies to tune materials for various biomedical applications. We report a facile approach using photolithography to fabricate poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (

PEDOT

PSS) sensors on a fully biodegradable and flexible silk protein fibroin support. A benchtop photolithographic setup is used to fabricate high fidelity and high resolution

PEDOT

PSS microstructures over a large (cm) area using only water as the solvent. Using the conductive micropatterns as working electrodes, we demonstrate biosensors with excellent electrochemical activity and stability over a number of days. The fabricated biosensors display excellent nonspecific detection of dopamine and ascorbic acid with high sensitivity. These devices are mechanically flexible, optically transparent, electroactive, cytocompatible and biodegradable. The benign fabrication protocol allows the conducting ink to function as a matrix for enzymes as shown by a highly sensitive detection of glucose. These sensors can retain their properties under repeated mechanical deformations, but are completely degradable under enzymatic action. The reported technique is scalable and can be used to develop sensitive, robust, and inexpensive biosensors with controllable biodegradability, leading to applications in transient or implantable bioelectronics and optoelectronics.

Resilin-PEG Hybrid Hydrogels Yield Degradable Elastomeric Scaffolds with Heterogeneous Microstructure

Hydrogels derived from resilin-like polypeptides (RLPs) have shown outstanding mechanical resilience and cytocompatibility; expanding the versatility of RLP-based materials via conjugation with other polypeptides and polymers would offer great promise in the design of a range of materials. Here, we present an investigation of the biochemical and mechanical properties of hybrid hydrogels composed of a recombinant RLP and a multiarm PEG macromer. These hybrid hydrogels can be rapidly cross-linked through a Michael-type addition reaction between the thiols of cysteine residues on the RLP and vinyl sulfone groups on the multiarm PEG. Oscillatory rheology and tensile testing confirmed the formation of elastomeric hydrogels with mechanical resilience comparable to aortic elastin; hydrogel stiffness was easily modulated through the cross-linking ratio. Macromolecular phase separation of the RLP-PEG hydrogels offers the unique advantage of imparting a heterogeneous microstructure, which can be used to localize cells, through simple mixing and cross-linking. Assessment of degradation of the RLP by matrix metalloproteinases (MMPs) illustrated the specific proteolysis of the polypeptide in both its soluble form and when cross-linked into hydrogels. Finally, the successful encapsulation and viable three-dimensional culture of human mesenchymal stem cells (hMSCs) demonstrated the cytocompatibility of the RLP-PEG gels. Overall, the cytocompatibility, elastomeric mechanical properties, microheterogeneity, and degradability of the RLP-PEG hybrid hydrogels offer a suite of promising properties for the development of cell-instructive, structured tissue engineering scaffolds.

Isabgol–silk fibroin 3D composite scaffolds as an effective dermal substitute for cutaneous wound healing in rats

Psyllium husk based silk 3D scaffolds were developed via freeze drying method without adding any bioactive substances to enhance tissue repair during cutaneous wound healing in rats.

Dual mode gelation behavior of silk fibroin microgel embedded poly(ethylene glycol) hydrogels

Hydrogel formation by more than two cross-linking mechanisms is preferred for the sophisticated manipulation of hydrogel properties.

A microporous silk carbon–ionic liquid composite for the electrochemical sensing of dopamine

A metal-free silk carbon–ionic liquid composite, synthesized from natural silk cocoons, was prepared for electrochemical determination of dopamine.

Effect of different fabrication methods on the chemo-physical properties of silk fibroin films and on their interaction with neural cells

In this study, we investigated the influence of processing methods on the chemo-physical properties of silk fibroin (SF) film and on their interaction with neural cells.

Preparation of silk fibroin carriers for controlled release

Silk fibroin provides a new option for controlled release systems as a result of its excellent biodegradability, biocompatibility, and mechanical properties. As the core material, silk fibroin can be designed and widely used in drug/gene delivery, regenerative medicine, and other biomedical fields. This review focuses on the preparation methods, loading molecules, and applications of silk fibroin-based controlled release systems including microspheres, microcapsules, films, microparticles, microneedles, liposomes, and hydrogels. These systems provide numerous advantages such as high encapsulation efficiency, avoiding loss of bioactivity and maintaining desirable range without peaks and valleys in comparison to the traditional administration approaches. Microsc. Res. Tech. 80:312-320, 2017. © 2015 Wiley Periodicals, Inc.

Fabrication of Tunable, High-Refractive-Index Titanate-Silk Nanocomposites on the Micro- and Nanoscale

The combination of water-based titanate nanosheets dispersion and silk fibroin solution allows the realization of a versatile nanocomposite. Different fabrication techniques can be easily applied on these nanocomposites to manipulate the end form of these materials on the micro- and nanoscale. Easy tunability of the refractive index from n = 1.55 up to n = 1.97 is achieved, making it attractive for flexible, biopolymer-based optical devices.

Fabrication of Robust Protein Films Using Nanoimprint Lithography

A nanoimprint-lithography-based fabrication method to generate stable protein films is described. The process is environmentally friendly and generalizable with respect to the protein building blocks. These non-fouling surfaces are readily patternable, incorporate intrinsic protein charge into the film, and able to control cellular adhesion.

Antitumor properties of platinum(iv) prodrug-loaded silk fibroin nanoparticles

Platinum(iv) complexes take advantage of the exclusive conditions that occur within the tumor to carry out their cytotoxic activity. On the other hand, silk fibroin has natural properties which make it very interesting as a biomaterial: high biocompatibility, biodegradability, low immunogenicity, high cellular penetration capacity and high reactive surface. Herein we report the preparation of silk fibroin nanoparticles (SFNs) loaded with the hydrophobic Pt(iv) complex cis,cis,trans-[Pt(NH(3))(2)Cl(2)(O(2)CC(6)H(5))(2)] (PtBz). Only a small fraction of the loaded PtBz is released (less than 10% after 48 h). PtBz-SFNs trigger strong cytotoxic effects against human ovarian carcinoma A2780 cells and their cisplatin-resistant variant A2780cisR cells. Interestingly, PtBz-SFNs are very cytotoxic (nanomolar IC(50) values) toward the triple negative breast tumor cell line MDA-MB-231, and also toward SK-BR-3 and MCF-7, while maintaining an excellent selectivity index.

Recent advances in the use of gelatin in biomedical research

The biomacromolecule, gelatin, has increasingly been used in biomedicine-beyond its traditional use in food and cosmetics. The appealing advantages of gelatin, such as its cell-adhesive structure, low cost, off-the-shelf availability, high biocompatibility, biodegradability and low immunogenicity, among others, have made it a desirable candidate for the development of biomaterials for tissue engineering and drug delivery. Gelatin can be formulated in the form of nanoparticles, employed as size-controllable porogen, adopted as surface coating agent and mixed with synthetic or natural biopolymers forming composite scaffolds. In this article, we review recent advances in the versatile applications of gelatin within biomedical context and attempt to draw upon its advantages and potential challenges.

Tuning assembly and enzymatic degradation of silk/poly(N-vinylcaprolactam) multilayers via molecular weight and hydrophobicity

We report on enzymatically degradable nanothin coatings obtained by layer-by-layer (LbL) assembly of silk fibroin with poly(N-vinylcaprolactam) (PVCL) via hydrogen bonding and hydrophobic interactions. We found that both silk β-sheet content, controlled through dipping and spin-assisted LbL, and PVCL molecular weight regulate film thickness, microstructure, pH-stability, and biodegradability with a nanoscale precision. Thickness of (silk/PVCL) films increased with increase in PVCL molecular weight and decrease in deposition pH. The impact of assembly pH on film growth was more dramatic for dipped films. These systems show a significant rise in thickness with increase in PVCL molecular weight at pH < 5 but become independent on polymer chain length at pH ≥ 5. We also found that spin-assisted films exhibited a greater stability at elevated pH and against enzymatic degradation as compared to their dipped counterparts. For both film types, the pH and enzymatic stability was improved with increasing PVCL length and β-sheet content, indicating enhanced hydrophobic and hydrogen-bonded interactions between PVCL and silk. Finally, we fabricated spherical and cubical (silk/PVCL) LbL capsules of regulated permeability and enzymatic degradation. Our approach gives a unique opportunity to tune thickness, morphology, structure, and biodegradability rate of silk films and capsules by varying silk secondary structure and PVCL length. Accounting for all-aqueous fabrication and the biocompatibility of both polymers these biodegradable materials provide novel platforms for delivery systems and medical devices.

Silk fibroin for vascular regeneration

Cardiovascular disease is the primary cause of morbidity and mortality in today's world. Due to the lack of healthy autologous vessels, more tissue-engineered blood vessels are needed to repair or replace the damaged arteries. Biomaterials play an indispensable role in creating a living neovessel with biological responses. Silk fibroin produced by silkworms possesses good cytocompatibility, tailorable biodegradability, suitable mechanical properties, and minimal inflammatory reactions. In addition, regenerated silk fibroin solutions can be processed into various forms of scaffolds such as films, fibers, tubes, and porous sponges. These features make silk fibroin a promising biomaterial for small-diameter vascular grafts. The present article focuses on the applications of silk fibroin for vascular regeneration. A brief overview of the properties of silk fibroin is provided, following which the current research status and future directions of the main types of silk fibroin scaffolds for vascular regeneration are reviewed and discussed. Microsc. Res. Tech. 80:280-290, 2017. © 2015 Wiley Periodicals, Inc.

Silk-based biomaterials in biomedical textiles and fiber-based implants

Biomedical textiles and fiber-based implants (BTFIs) have been in routine clinical use to facilitate healing for nearly five decades. Amongst the variety of biomaterials used, silk-based biomaterials (SBBs) have been widely used clinically viz. sutures for centuries and are being increasingly recognized as a prospective material for biomedical textiles. The ease of processing, controllable degradability, remarkable mechanical properties and biocompatibility have prompted the use of SBBs for various BTFIs for extracorporeal implants, soft tissue repair, healthcare/hygiene products and related needs. The present Review focuses on BTFIs from the perspective of types and physical and biological properties, and this discussion is followed with an examination of the advantages and limitations of BTFIs from SBBs. The Review covers progress in surface coatings, physical and chemical modifications of SBBs for BTFIs and identifies future needs and opportunities for the further development for BTFIs using SBBs.

Enhanced the Negative Charges of Antheraea pernyi Silk Fibroin by Methylglyoxal Modification

Antheraea pernyi silk fibroin has favorable biocompatibility, good bioactivity and controllable biodegradability, meeting the basic requirements of controlled drug release carriers. Enhancing the negative charge of silk fibroin could further increase the encapsulation and loading efficiency of positively charged drugs. In this study, Antheraea pernyi silk fibroin was chemically modified by methylglyoxal in aqueous solution. The electric charge properties of Antheraea pernyi silk fibroin were examined to characterize the modification, the results indicated that the isoelectric point of Antheraea pernyi silk fibroin decreased from 4.5 to 3.9, and the zeta potential reduced from-11.7 mV to-12.8 mV. Amino acid analysis and 1H-NMR spectra showed that arginine residue of Antheraea pernyi silk fibroin side chain was modified by methylglyoxal for enhancing negative charge of silk fibroin. These results suggested that methylglyoxal-modified Antheraea pernyi silk fibroin could be considered as a potential starting material in loading positively charged drugs.

Hybrid protein-synthetic polymer nanoparticles for drug delivery

Among the most common nanoparticulate systems, the polymeric nanocarriers have a number of key benefits, which give a great choice of delivery platforms. Nevertheless, polymeric nanoparticles possess some limitations that include use of toxic solvents in the production process, polymer degradation, drug leakage outside the diseased tissue, and polymer cytotoxicity. The combination of polymers of biological and synthetic origin is an appealing modern strategy for the production of novel nanocarriers with unprecedented properties. Proteins' interface can play an important role in determining bioactivity and toxicity and gives perspective for future development of the polymer-based nanoparticles. The design of hybrid constructs composed of synthetic polymer and biological molecules such as proteins can be considered as a straightforward tool to integrate a broad spectrum of properties and biofunctions into a single device. This review discusses hybrid protein-synthetic polymer nanoparticles with different structures and levels in complexity and functionality, in view of their applications as drug delivery systems.

Silk fibroin scaffolds promote formation of the ex vivo niche for salivary gland epithelial cell growth, matrix formation, and retention of differentiated function

Salivary gland hypofunction often results from a number of causes, including the use of various medications, radiation for head and neck tumors, autoimmune diseases, diabetes, and aging. Since treatments for this condition are lacking and adult salivary glands have little regenerative capacity, there is a need for cell-based therapies to restore salivary gland function. Development of these treatment strategies requires the establishment of a system that is capable of replicating the salivary gland cell "niche" to support the proliferation and differentiation of salivary gland progenitor cells. In this study, a culture system using three-dimensional silk fibroin scaffolds (SFS) and primary salivary gland epithelial cells (pSGECs) from rat submandibular (SM) gland and parotid gland (PG) was established and characterized. pSGECs grown on SFS, but not tissue culture plastic (TCP), formed aggregates of cells with morphological features resembling secretory acini. High levels of amylase were released into the media by both cell types after extended periods in culture on SFS. Remarkably, cultures of PG-derived cells on SFS, but not SM cells, responded to isoproterenol, a β-adrenergic receptor agonist, with increased enzyme release. This behavior mimics that of the salivary glands in vivo. Decellularized extracellular matrix (ECM) formed by pSGECs in culture on SFS contained type IV collagen, a major component of the basement membrane. These results demonstrate that pSGECs grown on SFS, but not TCP, retain important functional and structural features of differentiated salivary glands and produce an ECM that mimics the native salivary gland cell niche. These results demonstrate that SFS has potential as a scaffold for creating the salivary gland cell niche in vitro and may provide an approach for inducing multipotent stem cells to provide therapeutically meaningful numbers of salivary gland progenitor cells for regenerating these tissues in patients.

Electrospun silk fibroin fiber diameter influences in vitro dermal fibroblast behavior and promotes healing of ex vivo wound models

Replicating the nanostructured components of extracellular matrix is a target for dermal tissue engineering and regenerative medicine. Electrospinning Bombyx mori silk fibroin (BMSF) allows the production of nano- to microscale fibrous scaffolds. For BMSF electrospun scaffolds to be successful, understanding and optimizing the cellular response to material morphology is essential. Primary human dermal fibroblast response to nine variants of BMSF scaffolds composed of nano- to microscale fibers ranging from ~250 to ~1200 nm was assessed in vitro with regard to cell proliferation, viability, cellular morphology, and gene expression. BMSF support of epithelial migration was then assessed through utilization of a novel ex vivo human skin wound healing model. Scaffolds composed of the smallest diameter fibers, ~250 -300 nm, supported cell proliferation significantly more than fibers with diameters approximately 1 μm (p < 0.001). Cell morphology was observed to depart from a stellate morphology with numerous cell -fiber interactions to an elongated, fiber-aligned morphology with interaction predominately with single fibers. The expressions of extracellular matrix genes, collagen types I and III (p < 0.001), and proliferation markers, proliferating cell nuclear antigen (p < 0.001), increased with decreasing fiber diameter. The re-epithelialization of ex vivo wound models was significantly improved with the addition of BMSF electrospun scaffolds, with migratory keratinocytes incorporated into scaffolds. BMSF scaffolds with nanofibrous architectures enhanced proliferation in comparison to microfibrous scaffolds and provided an effective template for migratory keratinocytes during re-epithelialization. The results may aid in the development of effective BMSF electrospun scaffolds for wound healing applications

Thromboelastometric and platelet responses to silk biomaterials

Silkworm's silk is natural biopolymer with unique properties including mechanical robustness, all aqueous base processing and ease in fabrication into different multifunctional templates. Additionally, the nonmulberry silks have cell adhesion promoting tri-peptide (RGD) sequences, which make it an immensely potential platform for regenerative medicine. The compatibility of nonmulberry silk with human blood is still elusive; thereby, restricts its further application as implants. The present study, therefore, evaluate the haematocompatibility of silk biomaterials in terms of platelet interaction after exposure to nonmulberry silk of Antheraea mylitta using thromboelastometry (ROTEM). The mulberry silk of Bombyx mori and clinically used Uni-Graft W biomaterial serve as references. Shortened clotting time, clot formation times as well as enhanced clot strength indicate the platelet mediated activation of blood coagulation cascade by tested biomaterials; which is comparable to controls.