Microplastics in soil: A review on methods, occurrence, sources, and potential risk

High abundance of microplastics in groundwater in Jiaodong Peninsula, China

The occurrence of microplastics (MPs, <5 mm) in drinking water has aroused extensive concerns, whereas our understanding of their presence in groundwater, a major source of drinking water, is still limited. The present study investigated the occurrence of microplastics in groundwater sampled from five sites in Jiaodong Peninsula, China. The abundance, type, and size of MPs in the groundwater samples were determined by Laser Direct Infrared following a well-established and quality-controlled analytical route. Notably, MPs were detected in groundwater across all five sampling sites, with high abundances ranging from 87 to 6832 particles/L and an average abundance of 2103 particles/L. The variation of the abundance of MPs was correlated to the distances between sampling sites and anthropogenic activities, which suggested significant impacts of aboveground industry and agriculture on the abundance of MPs in groundwater. Polyethylene terephthalate (PET) and polyurethane (PU) were the dominant polymer types detected in all groundwater samples. The MPs with a size smaller than 100 μm were found to account for >90% of the total MPs detected in four sampling sites, which was likely associated with their migratory routes through surface water runoff and infiltration into the groundwater settings. The results of this study suggest the importance of counting small MPs when determining their abundances in groundwater or their abundances would be considerably underestimated. The present study for the first time demonstrated the occurrence of MPs in groundwater in China, which improves our understanding of the MPs distribution and raises concerns about groundwater safety in terms of MPs pollution.

Interplay of plastic pollution with algae and plants: hidden danger or a blessing?

In the era of plastic pollution, plants have been discarded as a system that is not affected by micro and nanoplastics, but contrary to beliefs that plants cannot absorb plastic particles, recent research proved otherwise. The presented review gives insight into known aspects of plants' interplay with plastics and how plants' ability to absorb plastic particles can be utilized to remove plastics from water and soil systems. Microplastics usually cannot be absorbed by plant root systems due to their size, but some reports indicate they might enter plant tissues through stomata. On the other hand, nanoparticles can enter plant root systems, and reports of their transport via xylem to upper plant parts have been recorded. Bioaccumulation of nanoplastics in upper plant parts is still not confirmed. The prospects of using biosystems for the remediation of soils contaminated with plastics are still unknown. However, algae could be used to degrade plastic particles in water systems through enzyme facilitated degradation processes. Considering the amount of plastic pollution, especially in the oceans, further research is necessary on the utilization of algae in plastic degradation. Special attention should be given to the research concerning utilization of algae with restricted algal growth, ensuring that a different problem is not induced, "sea blooming", during the degradation of plastics.

Method Development for Separation and Analysis of Tire and Road Wear Particles from Roadside Soil Samples

A comprehensive understanding of tire and road wear particles (TRWPs) and their detection and quantification in soils is still challenged by the lack of well-set standardized methods, inherent technological inconsistencies, and generalized protocols. Our protocol includes soil sampling, size separation, and organic matter removal by using hydrogen peroxide followed by density separation and analysis. In this context, roadside soil samples from different sites in Kansas and Ohio, USA, were collected and analyzed. Tire cryogrinds analogous to TRWPs were used to evaluate various density separation media, and collected particles more than 1 mm in size were then subjected to infrared spectroscopy (IR), thermogravimetric analysis (TGA), and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX) to confirm TRWP presence. Particles smaller than 1 mm were Soxhlet extracted, followed by gas chromatography-mass spectrometry (GC-MS) to validate the presence of tire-related intermediates. SEM-EDX validated the presence of elemental combinations (S + Zn/Na) ± (Al, Ca, Mg, K, Si) attributed to tires. Ketones, carboxylic acids, epoxies, cyclohexane, and benzothiazole sulfenamide (BTS) intermediates were the most probable tire-related intermediates observed in the roadside soil samples. Thus, this simple, widely applicable, cost-effective sample preparation protocol for TRWP analysis can assist TRWP research advancement in terrestrial environments.

Effects of clay minerals on the transport of polystyrene nanoplastic in groundwater

Microplastics are widely detected in the soil-groundwater environment, which has attracted more and more attention. Clay mineral is an important component of the porous media contained in aquifers. The transport experiments of polystyrene nanoparticles (PSNPs) in quartz sand (QS) mixed with three kinds of clay minerals are conducted to investigate the effects of kaolinite (KL), montmorillonite (MT) and illite (IL) on the mobility of PSNPs in groundwater. Two-dimensional (2D) distributions of DLVO interaction energy are calculated to quantify the interactions between PSNPs and three kinds of clay minerals. The critical ionic strengths (CIS) of PSNPs-KL, PSNPs-MT and PSNPs-IL are 17.0 mM, 19.3 mM and 21.0 mM, respectively. Experimental results suggest KL has the strongest inhibition effect on the mobility of PSNPs, followed by MT and IL. Simultaneously, the change of ionic strength can alter the surface charge of PSNPs and clay minerals, thus affecting the interaction energy. Experimental and model results indicate both the deposition rate coefficient (k) and maximum deposition (S_max) linearly decrease with the logarithm of the DLVO energy barrier, while the mass recovery rate of PSNPs (R_m) exponentially increases with the logarithm of the DLVO energy barrier. Therefore, the mobility and associated kinetic parameters of PSNPs in complex porous media containing clay minerals can be predicted by 2D distributions of DLVO interaction energy. These findings could help to gain insight into understanding the environmental behavior and transport mechanism of microplastics in the multicomponent porous media, and provide a scientific basis for the accurate simulation and prediction of microplastic contamination in the groundwater system.

Promising indicators for monitoring microplastic pollution

Microplastic pollution is a global crisis. This requires a better understanding of microplastic abundance, distribution, and accumulation to prevent potential risks in the future. However, it is very difficult to accurately identify all polymers of microplastics due to the limits of present detection technologies, which might result in overestimation and underestimation of microplastic pollution. Moreover, it also doesn't meet the growing demand for regular monitoring. Herein, we propose an alternative approach to regularly monitoring microplastics in all environmental mediums. The results could meet the urgent need for understanding the spatiotemporal pattern of microplastic pollution. Environmental policy-makers can use it to monitor microplastic pollutants and then rapidly evaluate the environmental level of microplastic pollution.

Microplastics in agricultural soils from a semi-arid region and their transport by wind erosion

Despite the importance of agricultural soils, little is known about the fate of microplastics (MPs) in this environment. In the present study, MPs have been determined in soils and wind-eroded sediments from two vegetable-growing fields in the Fars province of Iran, one using plastic mulch for water retention (Field 1) and the other using wastewater for irrigation (Field 2). MPs were heterogeneously distributed in the surface (0-5 cm) and subsurface (5-15 cm) soils of both fields, with a maximum concentration overall of about 1.1 MP g^-1 and no significant differences in concentrations between either fields or depths. Fibres represented the principal shape of MPs, but spherules, presumably from wastewater, also made a significant (∼25%) contribution to MPs in Field 2. Analysis of selected samples by Raman spectroscopy and scanning electron microscopy revealed that polyethylene terephthalate (PET) and nylon were the most abundant polymers and that MPs exhibited varying degrees of weathering. Concentrations of MPs in this study are within the range reported previously for agricultural soils, although the absence of PET observed in earlier studies is attributed to the use of insufficiently dense solutions to isolate plastics. Deployment of a portable wind tunnel revealed threshold wind velocities for soil erosion of up to 7 and 12 m s^-1 and MP erosion rates up to about 0.4 and 1.1 MP m^-2 s^-1 for Fields 1 and 2, respectively. Erosion rates are considerably greater than published depositional rates for MPs and suggest that agricultural soils act as both a temporary sink and dynamic secondary source of MPs that should be considered in risk assessments and global transport budgets.

Microplastic removal from urban stormwater: Current treatments and research gaps

Stormwater is a major contributor to microplastic (MP) pollution in the aquatic environment. Although MPs are associated with many toxicological effects, their levels in stormwater are not regulated. This review compared the effectiveness of different MP removal technologies from stormwater runoff and examined the performance of typical stormwater treatment systems for MP removal to assess possible MP pollution control via stormwater management. Bioretention and filtration systems performed similarly with 84-96% MP removal efficiencies. Despite the limited number of studies that focused on wetlands and retention ponds, preliminary data suggested potential for MP removal with efficiencies of 28-55% and 85-99%, respectively. Despite the higher efficiency of bioretention and filtration systems, their removal efficiency of fibrous MPs was not optimal. Furthermore, wetlands were less effective in removing MPs than retention ponds, although the limited data might lead to an inaccurate representation of typical performances. Therefore, more research is required to arrive at definitive conclusions and to investigate alternative treatment options, such as ballasted sand flocculation, flotation, and biological degradation, and evaluate the effectiveness of bioretention and filtration for MPs <100 μm.

Coupled effects of microplastics and heavy metals on plants: Uptake, bioaccumulation, and environmental health perspectives

Microplastic pollution has severe ecological and environmental concerns because of its enormous production and discharge in natural ecosystems worldwide. Microplastics interact with heavy metals and metalloids like arsenic, chromium, copper, cadmium, and lead in soil and can cause detrimental effects on soil structure and microbial activities and subsequently impact the plants and human health. This article focuses on microplastic translocation from soil to plants together with heavy metals. Microplastic exposure impacts biomass, photosynthetic activity, chlorophyll content, root and shoot length in the plants through apoplastic and symplastic pathways. Microplastics can also indirectly affect the plant growth by changing soil nutrient content and microbial community structure. At the same time, microplastics can absorb heavy metals and increase phytotoxicity in plants. However, the current knowledge about the coupled effect of heavy metals and microplastics bioaccumulation in plants is limited. It is postulated that heavy metals and microplastics collectively impact the chlorophyll content, photosynthetic activity, and induction of reactive oxygen species in plants. This work also outlines the environmental health perspectives based on microplastic and heavy metals toxicity and provides a guideline for future research on the coupled effects of heavy metals and microplastics on plants and humans.

Polystyrene microplastics up-regulates liver glutamine and glutamate synthesis and promotes autophagy-dependent ferroptosis and apoptosis in the cerebellum through the liver-brain axis

Microplastics (MPs), which are emerging environmental pollutants, remain uncertainties in their toxic mechanism. MPs have been linked to severe liver metabolic disorders and neurotoxicity, but it is still unknown whether the abnormal metabolites induced by MPs can affect brain tissue through the liver-brain axis. Exposed to MPs of chickens results in liver metabolic disorders and increased glutamine and glutamate synthesis. The relative expression of glutamine in the C group was -0.862, the L-PS group was 0.271, and the H-PS group was 0.592. The expression of tight junction proteins in the blood-brain barrier (BBB) was reduced by PS-MPs. Occludin protein expression decreased by 35.8%-41.2%. Claudin 3 decreased by 19.6%-42.3%, and ZO-1 decreased by 28.3%-44.6%. Excessive glutamine and glutamate cooperated with PS-MPs to inhibit the Nrf2-Keap1-HO-1/NQO1 signaling pathway and triggered autophagy-dependent ferroptosis and apoptosis. GPX protein expression decreased by 30.9%-38%. LC3II/LC3I increased by 54%, and Caspase 3 increased by 45%. Eventually, the number of Purkinje cells was reduced, causing neurological dysfunction. In conclusion, this study provides new insights for revealing the mechanism of nervous system damaged caused by PS-MPs exposed in chickens.

Long-range transport of atmospheric microplastics deposited onto glacier in southeast Tibetan Plateau

Micoroplastics (MPs) can be transported through atmospheric circulations, and have caused global attentions due to their potential risk to the environment. In this study, MPs in snowpit samples collected from Demula (DML) glacier in southeast Tibetan Plateau were investigated. The results showed that the average abundance of MPs in snow was 9.55 ± 0.9 items L^-1, with dominant shapes of plastic fibers and films. MPs size was dominated by MPs <200 μm, with detected minimum size of 48 μm from the DML glacier. MPs in snowpit indicated seasonal variations, showing relatively higher abundance during the monsoon season than that during the non-monsoon season. The chemical composition of MPs and backward air mass trajectory modeling revealed that MPs in DML snowpit mostly originated from the atmospheric long-range transport, suggesting the glacier in southeast Tibetan Plateau can be a temporal sink of atmospheric MPs. The surface structure of the MPs was rough and adhered to a large amount of mineral dust and metallic particles, revealed that these MPs have undergone severe weathering during transportation and after deposition. Based on the MPs data, multi-year average precipitation, and glacier mass balance of DML glacier, the deposition flux of MPs on DML glacier was estimated to be about 7640 ± 720 to 9550 ± 900 items m^-2 yr^-1 and the export from melting water was about 5.9 ± 1.3 × 10⁹ to 6.6 ± 1.4 × 10⁹ items yr^-1, indicating the glacier may be also an important source of MPs to the downstream ecosystems. These results provided the current status of MPs pollution on the Tibetan Plateau glaciers and new data to the study of MPs in typical cryospheric regions.

Microplastic pollution in urban green-belt soil in Shihezi City, China

The problems are associated with microplastic (MP) pollution of global concern. However, little is known about the pollution characteristics and sources of MPs in urban green-belt soils. Therefore, this study investigated MP pollution in 11 sampling sites (22 green belts) in Shihezi City. The results showed that the abundance of MPs (0.02-5.00 mm) ranged from 287 ± 100 items/kg dw to 3227 ± 155 items/kg dw (mean + SD). Fibers (69.9%) accounted for the majority of MPs, and the MPs were mainly black (36.7%) and 0.02-0.5 mm (64.8%). The main types of MPs were polystyrene (PS) and polyethylene (PE). Compared with agricultural soil, the color and composition of green-belt soil MPs are diverse, which means that the source of green-belt soil MPs is more diverse. In different types of green-belt soil, MP pollution of industrial green land is more serious. Through cluster analysis and spatial distribution, fragments and fibers were found to have similar sources, mainly originating from food and textile industrial activities. This study provides important information for revealing MP pollutions in urban green-belt soils.

A review of microplastics in soil: Occurrence, analytical methods, combined contamination and risks

Microplastics (MPs) pollution is becoming a serious environmental issue of global concern. Currently, the effects of MPs on aquatic ecosystems have been studied in detail and in depth from species to communities. However, soils, the largest reservoir of MPs, have been less studied, and little is known about the occurrence, environmental fate and ecological impacts of MPs. Therefore, based on the existing knowledge, this paper firstly focused specifically on the main sources of soil MPs pollution and explored the main reasons for their strong heterogeneity in spatial distribution. Secondly, as a primary prerequisite for evaluating MPs contamination, we systematically summarized the analytical methods for soil MPs and critically compared the advantages and disadvantages of the different methods in the various operational steps. Furthermore, this review highlighted the combined contamination of MPs with complex chemical contaminants, the sorption mechanisms and the associated factors in the soil. Finally, the risks posed by MPs to soil, plants, the food chain and even humans were outlined, and future directions for soil MPs research were proposed, while the urgent need for a unified approach to MPs extraction and identification was emphasized. This study provides a theoretical reference for a comprehensive understanding of the separation of soil MPs and their ecological risk as carriers of pollution.

Horizontal transport of macro- and microplastics on soil surface by rainfall induced surface runoff as affected by vegetations

Surface runoff is considered as an important pathway that transport of plastic waste from terrestrial environment into the aquatic environment but the process is still poorly understood. In this work, runoff plot experiment was carried out to study the horizontal transport of macro- and microplastics between 50 mm and 0.25 mm in size on the soil surface by rain induced runoff. The influences of vegetation cover, characteristics of plastics, and rainfall scenarios were investigated. Results showed that the presence of vegetation significantly enhance the retention of plastics by about 20% under the experimental conditions. Lower density and smaller (<1 mm) plastics were found to have higher mobility. The herb plant (Photinia×fraseri Dress) showed a better interception efficiency on plastics than the shrub plant (Ophiopogon japonicus (Linn. f.) Ker-Gawl.) at the same planting density, while increasing plant density contributed litter to the interception of microplastics. Increase rainfall amount from 20 mm to 60 mm enhanced the transport of plastics while repeating 20 mm rainfall every 3 days did not affect the transport of plastics significantly. The same processes may involve in the transport of plastics and soil particles by rainfall induced surface runoff. Strategies controlling soil erosion could also be used to prevent plastics in soil from entering the aquatic environment. However, effects and risks of plastics retained in the soil are still unclear, which need to be investigated in future.

Effect of land use on microplastic pollution in a major boundary waterway: The Arvand River

The occurrence of microplastics (MPs) was investigated in the Arvand River (Iran). The Arvand River (200 Km) is a major water body that flows through land with diverse use and it meets the Persian Gulf. This study constitutes the first assessment of MP pollution (prevalence and physico-chemical characteristics) in the Arvand river, both in the sediment and in the water. MP monitoring has been carried out in 24 stations located along the river. The MP pollution found ranged between 1 and 291 items·L^-1 and 70 to 15,620 items·kg^-1 (dw), in water and sediment, respectively. The majority of MPs were fibres, black/grey and yellow/orange in colour, and mainly 250-500 μm and >1000 μm in size. Polyethylene terephthalate (PET), polypropylene (PP), nylon (NYL), high-density polyethylene (HDPE), and polystyrene (PS) were found in sediment samples. All these polymers, except HDPE, were also identified in the water samples. PET and PP were dominant in the water samples; whereas PET and PS were the most abundant in the sediments. The vicinity of urban wastewater effluents could be behind MP pollution in both water and sediments. Significant differences (p < 0.05) of MP concentrations were affected by different land uses when comparing MP levels in undisturbed natural area with urban areas. A strong correlation between MP fibres and fragments found with PCA biplots revealed their similar distribution in water. In the sediment samples, fibre and fragment MP particles were significantly correlated with colloidal particles (e.g., clay and organic matter) suggesting a relevant role of colloidal particles in the aquatic ecosystem of the Arvand River in transporting MPs. This study contributes to the better understanding of the presence of MP in major rivers, which are systems that have been scarcely investigated for this type of pollution, and it can inform interventions to reduce MP inputs to the river and sea.

Microplastic characteristic in the soil across the Tibetan Plateau

Microplastics are widely detected in terrestrial environments. However, microplastic features in the soil of remote areas are still sparse. In this study, microplastic pollution in soil across the Tibetan Plateau was systematically investigated. The results revealed that microplastic was ubiquitous in the soil of the Tibetan Plateau with an average abundance of 47.12 items/kg-dry weight (range: 5-340 items/kg). Compared with the published data of soil microplastic pollution in other regions, the microplastic pollution in the Tibetan Plateau was relatively low. Fibers represented 43.54% of microplastic particles detected, followed by fragments (32.20%) and films (23.78%). They mainly consisted of polyvinyl chloride, polyethylene, polypropylene, and polystyrene. Transparent and white microplastics were prevalent, and small microplastics (50-500 μm) occupied approximately 66% of all microplastics. High values of microplastics were found near Lhasa, Naqu, and Linzhi. Furthermore, microplastic pollution was found to be negatively related to the distance to the nearest city (p < 0.01), wind velocity (p = 0.014), altitude (p = 0.181), yet positively related to precipitation (p = 0.024). This work presents new insights into the magnitude of microplastics contamination in the soil across the Tibetan Plateau and supplies valuable data for future research on ecotoxicology, ecosystem impacts, and earth system feedback of microplastics on terrestrial ecosystems.

Environmental behaviors and degradation methods of microplastics in different environmental media

Microplastics, as a group of emerging contaminants, are widely present in environmental media and have the potential to endanger the ecological environment and human health. Due to the inconsistencies and difficulties inherent in the analysis of microplastic particles, global monitoring data on the distribution of microplastics in the environment are still far from sufficient. The fate and migration of microplastics in the environment are also uncertain. Therefore, there have been increasing reviews on the distribution, biological effects, migration, and health risks of microplastics. However, reports focusing on the degradation of microplastics are still rare. Understanding and commanding the environmental behavior of microplastics are of great significance to explore the treatment of microplastic pollution. Although some preliminary studies on microplastics have been carried out, there is still an urgent need to conduct a comprehensive study on environmental behaviors and degradation methods of microplastics in different environmental media. This article summarizes the recent advances on microplastics, basically includes the distribution and ecological impact of microplastics in soil and water environments, then elaborates the migration behavior and influencing factors of microplastics, and focuses on the research progress of microplastics degradation methods. On this basis, the problems existing in the current research and the future development directions have been proposed. This review could provide a more systematic reference for the development and research of microplastics in the future.

Accumulation of microplastics in greenhouse soil after long-term plastic film mulching in Beijing, China

Intensive use of plastic film and organic fertilizer in the greenhouse has resulted in microplastic contamination of soil. However, microplastic pollution in different types of greenhouses has not been reported so far. The contamination of microplastics in three different types of greenhouses (abandoned greenhouse, normal greenhouse, and simple greenhouse) were investigated. The abundance of microplastics in abandoned greenhouse reached as high as 2215.56 ± 1549.86 items kg^-1, followed by normal greenhouse (891.11 ± 316.71 items kg^-1), and simple greenhouse (632.50 ± 566.93 items kg^-1). The mean abundance of microplastic organic fertilizer, and irrigation water were 1486.67 ± 140.48 items kg^-1, and 4.2 items L^-1, respectively. The abundance of microplastics in the shallow soils of abandoned greenhouse (826.67 ± 261.02) and normal greenhouse (560.00 ± 52.92 items kg^-1) were lower than those in the deep soils (1073.33 ± 306.16 and 720.00 ± 111.36 items kg^-1), while the simple greenhouse showed the opposite result. Microplastic was found to be primarily fragment-shaped, white in color, and 0-1 mm in size, and the polymers of microplastics were polypropylene (PP) and polyethylene (PE). White was the most frequently observed color in the abandoned greenhouse (46.1%) and normal greenhouse (32.2%), while the dominant color in the simple greenhouse was yellow (23.1%). This study provides first-hand data for the pollution characteristics of microplastics in different greenhouse soils and explores the primary sources of microplastics in the greenhouse soil.

Toxic effects of polystyrene nanoplastics and polybrominated diphenyl ethers to zebrafish (Danio rerio)

Nanoplastics (NPs) are good carriers of persistent organic pollutants (POPs) such as polybrominated diphenyl ethers (PBDEs), and can alter their bioavailability and toxic impacts to aquatic organisms. This study highlights the single and combined toxic effects of polystyrene nanoplastics (PS-NPs) and 2,2',4,4'-tetrabromodiphenyl ether (BDE-47, one of the dominant congeners of PBDEs) on zebrafish embryos after an exposure duration of up to 120 hpf. Results showed that PS-NPs and BDE-47 co-exposure exacerbated the morphological deformities in terms of pericardial edema, yolk sac edema and curved tail in zebrafish larvae. Compared to BDE-47 single exposure, the combined exposure caused lower survival rates, shorter body lengths, and accelerated spontaneous movements. Further, PS-NPs were quickly aggregated on the surface of the embryonic chorions covered almost the entire membrane at 12 and 48 hpf, and concentration dependent accumulation was also found in the brain, mouth, trunk, gills, heart, liver and gastrointestinal tract at the larval stages. During the recovery period (7 days), PS-NPs were released from all the organs, with the highest elimination from the gastrointestinal tract. Histopathological examination revealed that co-exposure caused greater damage to retinal structures, muscle fibers and cartilage tissues. Responses of hypothalamic-pituitary-thyroid axis (CRH, TSHβ, NIS, TTR, Dio2, TG, TRα and TRβ) and reproduction (Esr2 and Vtg1) related genes were also investigated, and results showed that the co-exposure induced more significant upregulated expressions of TSHβ, TG, Doi 2, and TRβ, compared to BDE-47 single exposure. In conclusion, co-exposure to NPs and BDE-47 exacerbated developmental and thyroid toxicity in zebrafish, generally elucidating the toxicological effects mediated by complex chemical interactions between NPs with POPs in the freshwater environment.

A review of analytical methods and models used in atmospheric microplastic research

Microplastic pollution in the environment has become a source of concern in recent years. The transport and deposition of suspended atmospheric microplastics play an important role in the global linkage of microplastic sources and sinks. In this review, we summarized recent research progress on sampling devices, pretreatments, and identification methods for atmospheric microplastics. The total suspended particles and atmospheric deposition, including dust, rainfall, and snow samples, are the environmental carriers for atmospheric microplastic studies. There are active and passive sampling methods. Pretreatment depends on sample types and identification methods and includes sieving, digestion, density separation, filtration, and drying. The measured features for atmospheric microplastics include particle size distributions, shapes, colors, surface morphology, and polymer compositions, using stereomicroscopes, Fourier transform infrared spectroscopy, scanning electron microscopy, Raman spectroscopy, and liquid chromatography-tandem mass spectrometry. Laser direct infrared spectroscopy and thermochemical methods coupled with mass spectrometry are potential methods for identifying atmospheric microplastics. Currently, models for estimating the fluxes of atmospheric microplastic emission, transport, and deposition are in the initial stages of development; their implementation will enhance our understanding of the "microplastic cycle" globally based on simulated and observed data.

Microplastics in arid soils: Impact of different cropping systems (Altay, Xinjiang)

Although microplastic pollution in the soil environment is currently an important research topic, few studies have focused on farmland soil in arid regions. This study investigated the abundances, sizes, polymer compositions, and forms of microplastics across nine agricultural plots cultivated with maize, sunflower, and potato (three of each crop) plants to determine the influences of different cropping characteristics and agricultural practices. The study area was within the arid region of the Ulungur River basin in Qinghe County, Altay, Xinjiang, China. The main forms of microplastics were fragments and fibers, and polyethylene was the dominant polymer (91.6%). The microplastic abundance ranged from 11 347 items/kg_dw to 78 061 items/kg_dw (mean of 52 081.7 items/kg_dw). The abundance and proportion of microplastics with a diameter of <0.2 mm were significantly higher in the sunflower and maize plots (i.e., tall crops) than in the potato plots (i.e., short crops) (p < 0.05). This is due to straw residues affecting the migration and recovery of the mulch. The abundance and fragmentation of microplastics were significantly higher in the sunflower and maize plots where plastic mulch was extensively used because these tall crops anchored the mulch near their stem-root systems. The mulch was then slowly aged (e.g., via wind erosion) before being fragmented due to agricultural practices (e.g., mechanical plowing and residue retention). Although microplastics sourced from mulch are probably immobilized by straw residues in the short term, fragile and easily broken pieces of mulch are eventually released into the soil due to agricultural practices. The findings suggest that different cropping characteristics can affect the abundance and fragmentation of microplastics in agricultural soils, even within the same region, and thus the level and type of microplastic pollution. Traditional plastic mulch should be replaced with biodegradable mulch to reduce microplastic pollution in agricultural fields.

Effect of polyethylene microplastics and acid rain on the agricultural soil ecosystem in Southern China

The increasing microplastics (MPs) pollution and continuous acid rain coincide in many areas of the world. However, how MPs interact with acid rain is still unclear. Herein, we conducted a microcosm experiment to decipher the combined effect of polyethylene (PE) MPs (1%, 5%, and 10%) and acid rain (pH 4.0) on the agricultural soil ecosystem of Southern China, in which edaphic property, microbial community, enzymatic activity and CO₂ emission were investigated. The results showed that PE MPs significantly decreased soil water retention and nitrate nitrogen content regardless of acid rain. Soil total nitrogen significantly decreased under the co-exposure of 10% PE MPs and acid rain. However, PE MPs did not alter soil microbial biomass, i.e., the content of microbial biomass carbon, total phospholipid fatty acids, with or without acid rain. 10% PE MPs and acid rain treatment significantly increased the activity of catalase and soil CO₂ emission. PE MPs addition did not affect the temperature sensitivity (Q₁₀) of soil CO₂ emission regardless of acid rain. These findings suggest that MPs may interact with acid rain to affect soil ecosystems, thus underscoring the necessity to consider the interaction between MPs and ambient environmental factors when exploring the impact of MPs on the soil biodiversity and function.

Biodegradable Nonwoven Agrotextile and Films—A Review

As society becomes more aware of environmental pollution, global warming, and environmental disasters, people are increasingly turning to sustainable materials and products. This includes agrotextiles in a wide range of products, including nonwoven agrotextiles for mulching. This review provides insight into relevant available data and information on the condition, possibilities, and trends of nonwoven mulches from natural fibres, biopolymers, and recycled sources. The basic definitions and differences between biodegradation and composting processes are explained, and the current standards related to biodegradation are presented. In addition, an insight into the biodegradation of various nonwoven mulches and films, including their advantages and disadvantages, is provided, to predict the future directions of nonwoven mulches development.

Extraction, identification, and environmental risk assessment of microplastics in commercial toothpaste

Microplastics in personal care and food products are given much importance globally due to the adverse impact of microplastics on living beings. In the present study, microplastics from ten different commercially sold toothpaste in India were extracted by vacuum filtration and characterized with microscopic and Fourier-transform infrared spectroscopic analyses. Results revealed that colorless fragments and fibers were the microparticle types of common occurrence which ranged from 0.2 to 0.9% weight in the toothpaste with an abundance range of 32.7-83.2%. Fifty percent of the toothpaste samples showed more than 50% microplastic particle abundance indicating that the microplastic plastic particles were added by the manufacturers. The minimum size of microplastics recorded in the present study was 3.5 μm with a maximum size exceeding 400 μm. The maximum number of microplastics in the toothpaste was 167, 508 and 193 respectively, distributed in the size range of <100 μm, 100-400 μm, and >400 μm. The present study recorded four major polymer types, viz., cellophane, polypropylene, polyvinyl chloride, and polyamide in the toothpaste samples. Surprisingly, polyethylene-a common polymer reported in toothpaste was not traced in the present samples. Regarding the Indian context, the current study is a new addition to the knowledge of the occurrence of microplastics in toothpaste. The average annual addition of microplastics into the environment through toothpaste was calculated as 1.4 billion g/year for India, posing a significant threat to the environment.

Evaluation of microplastic pollution in Shihezi city, China, using pine needles as a biological passive sampler

Microplastic (MP) pollution has attracted much attention. To understand the characteristics of atmospheric MP pollution in Shihezi, Northwest China, this study used pine needles from trees in Shihezi City as passive samplers. MP contamination was found in all pine needle samples, with an average concentration of 16.52 ± 3.76 items/g. MPs were mainly in the shape of fragments (<0.05 mm). Differences in MP pollution were observed in different functional areas. The abundance of MPs in pine needles was the highest on the main traffic road (19.02 ± 2.52 items/g). Spectral analysis showed that the main polymer of MPs was polyethylene (17.2%), followed by polystyrene (15.5%) and polypropylene (13.8%). By analyzing the principal components and spatial distribution, fragments and pellets were found to have similar sources (mainly industrial activities), whereas films and fibers were influenced by traffic flow. The source of films was related to the packaging industry. The purpose of this study was to provide a reference for the future use of pine needles as atmospheric MP passive samplers, for the traceability and prevention of urban atmospheric MP pollution and for the formulation of national atmospheric MP environmental standards.

Soil plastisphere: Exploration methods, influencing factors, and ecological insights

Microplastic (MP), an emerging contaminant, is globally prevalent and poses potential environmental threats and ecological risks to both aquatic and terrestrial ecosystems. When MPs enter into natural environments, they may serve as artificial substrates for microbial colonization and plastisphere formation, providing new ecological niches for microorganisms. Recent studies of the plastisphere have focused on aquatic ecosystems. However, our understanding of the soil plastisphere e.g. its formation process, microbial ecology, co-transport of organic pollutants and heavy metals, and effects on biogeochemical processes is still very limited. This review summarizes latest methods used to explore the soil plastisphere, assesses the factors influencing the microbial ecology of the soil plastisphere, and sheds light on potential ecological risks caused by the soil plastisphere. The formation and succession of soil plastisphere communities can be driven by MP characteristics and soil environmental factors. The soil plastisphere may affect a series of ecological processes, especially the co-transport of environmental contaminants, biodegradation of MPs, and soil carbon cycling. We aim to narrow the knowledge gap between the soil and aquatic plastisphere, and provide valuable guidance for future research on the soil plastisphere in MP-contaminated soils.

A review on the occurrence and influence of biodegradable microplastics in soil ecosystems: Are biodegradable plastics substitute or threat?

Plastic products are widely used around the world, but waste plastic is not reasonably managed and causes serious plastic pollution. Biodegradable plastics (BPs) provide an alternative to conventional plastics, but not all BPs can be completely degraded under natural conditions. Instead, they may break down into microplastics (MPs) faster than conventional plastics, posing an additional threat to soil environment. In this paper, the definition, applications, and degradation behaviors of BPs, including biodegradable microplastics (BMPs), are reviewed, and we comprehensively summarized the eco-toxicological effects of BMPs in soil ecosystems, in terms of physical and chemical properties of soil, soil nutrient cycling, soil bacterial and fungal communities, soil flora and fauna. The compound effects of BMPs and other pollutants were also addressed. The results revealed that BMPs made different or more severely effects compared to conventional MPs. Overall, this review aims to address gaps in knowledge, shed light on the ecological effects of BPs and BMPs in soil. BPs are not a perfect substitute to solve plastic pollution, and further exploration should focus on their generation, environmental behavior, ecological impact and whether BMPs cause more harm than conventional MPs.

Major contaminants of emerging concern in soils: a perspective on potential health risks

Soil pollution by the contaminants of emerging concern (CECs) or emerging contaminants deserves attention worldwide because of their toxic health effects and the need for developing regulatory guidelines. Though the global soil burden by certain CECs is in several metric tons, the source-tracking of these contaminants in soil environments is difficult due to heterogeneity of the medium and complexities associated with the interactive mechanisms. Most CECs have higher affinities towards solid matrices for adsorption. The CECs alter not only soil functionalities but also those of plants and animals. Their toxicities are at nmol to μmol levels in cell cultures and test animals. These contaminants have a higher propensity in accumulating mostly in root-based food crops, threatening human health. Poor understanding on the fate of certain CECs in anaerobic environments and their transfer pathways in the food web limits the development of effective bioremediation strategies and restoration of the contaminated soils and endorsement of global regulatory efforts. Despite their proven toxicities to the biotic components, there are no environmental laws or guidelines for certain CECs. Moreover, the information available on the impact of soil pollution with CECs on human health is fragmentary. Therefore, we provide here a comprehensive account on five significantly important CECs, viz., (i) PFAS, (ii) micro/nanoplastics, (iii) additives (biphenyls, phthalates), (iv) novel flame retardants, and (v) nanoparticles. The emphasis is on (a) degree of soil burden of CECs and the consequences, (b) endocrine disruption and immunotoxicity, (c) genotoxicity and carcinogenicity, and (d) soil health guidelines.

Complex Bilateral Interactions Determine the Fate of Polystyrene Micro- and Nanoplastics and Soil Protists: Implications from a Soil Amoeba

Nano- and microplastics have become a serious global concern, threatening our living environments. Previous studies have shown that many organisms, including bacteria, animals, and plants, can be affected by microplastics. However, little is known about one ecologically important group of soil organisms, the protists. In this study, we investigated how polystyrene micro- and nanoplastics interacted with a soil amoeba Dictyostelium discoideum. The results showed that environmental concentrations of nano- and microplastics could negatively affect the soil amoeba's fitness and development. D. discoideum ingested both nano- and microplastics through phagocytosis but packed and excreted them during slug migration, which also promoted their biodegradation. Fourier transform infrared spectroscopy analyses revealed the formation of new oxygen-containing functional groups and the sign of possible oxidation of polystyrene. Also, nano- and microplastic exposure disrupted the nutrient and energy metabolisms of D. discoideum and affected the expression of key genes (e.g., cf45-1, dcsA, aprA, dymB, and gefB) related to morphogenesis and phagocytosis. In conclusion, our results show that nano- and microplastics have complex bilateral interactions with the soil amoeba, affecting each other's fate in the soil environment. This study provides new insights into how soil protists interact with nano- and microplastics in the soil ecosystem.

Is mulch film itself the primary source of meso- and microplastics in the mulching cultivated soil? A preliminary field study with econometric methods

There has been an increasing interest in the pollution caused by meso- and microplastics (MMPs) in terrestrial ecosystems. Mulch film was once considered to be the most important source of MMPs in the mulching cultivated soil. However, the academic community has not given sufficient scientific evidence. In this study, stratified random sampling method was used to selectively interview households in Hebei province, China (400 households, 20 villages, 5 counties). Finally, household characteristics and mulch film use behavior of 41 households were collected, and corresponding soil samples were sampled. The results showed that 1) the abundance of MMPs was 29.3 ± 33.1 items·kg^-1 (DW) and the particle size of MMPs was 2.95 × 10³±1.75 × 10³ μm, and the proportion of MMPs derived from Polyethylene (PE) was only 18.8%; 2) the mass of MMPs was 2.90 ± 3.72 mg kg^-1 (DW) and the proportion of PE MMPs was 43.75%, which has the highest mass percentage; 3) After controlling the endogenous and dummy variables, the use history of mulch film (HistMF) was found to be positively correlated to the abundance of MMPs and inversely correlated to the particle size, but nor with the mass of MMPs; 4) Regarding the heterogeneous characteristics of MMPs, including particle size, color, shape, and type, the findings found the absence of a significant correlation between HistMF and the abundance and mass of PE. In summary, mulch-derived MMPs are not the primary source of MMPs in the mulching cultivated soil in terms of abundance but probably be in terms of mass.

Recycled wastewater as a potential source of microplastics in irrigated soils from an arid-insular territory (Fuerteventura, Spain)

In this work, the occurrence of microplastics (MPs) in irrigation recycled wastewaters (RWWs) and a desalinated brackish water (DBW) from the arid territory of Fuerteventura (Canary Islands, Spain) was studied. Besides, the presence of MPs in two types of soils (sandy-loam and clay-loamy; with no mulch film or fertilization with sewage sludge applied) irrigated with both water qualities was addressed. Results showed the prevalence presence of cellulosic and polyester microfibers (between 84.4 and 100%) of blue and transparent colors (up to 55.6 and 33.3%, respectively), with an average length of 786.9 ± 812.1 μm in the water samples. DBW had the lowest MP concentration (2.0 ± 2.0 items·L^-1) while RWW showed concentrations up to 40.0 ± 19.0 items·L^-1. Similarities were also observed between the MPs types and sizes found in both soils top layer (0-5 cm), with an average concentration three times greater in soil irrigated with RWW than in soil under DBW irrigation (159 ± 338 vs. 46 ± 92 items·kg^-1, respectively). In addition, no MPs were extracted from non-irrigated/non-cultivated soils, suggesting agricultural activities as the unique source of MPs in soils of this arid area. Results show that RWWs constitute a potential source of MPs in irrigated soils that should be considered among other pros and cons linked to the use of this water quality in agricultural arid lands.

Surfactant-induced adsorption of Pb(II) on the cracked structure of microplastics

Surfactant molecules can change the hydrophobic nature of microplastic surfaces, thereby affecting the adsorption of heavy metals in the environment onto the microplastics. It is essential to explore the role of crack structure of microplastics in the adsorption of heavy metals, especially in the presence of surfactants. In this study, polyethylene (PE) and polypropylene (PP) were evaluated for Pb(II) adsorption and desorption mechanism in the presence of two surfactants: cetyltrimethylammonium bromide (CTAB) and sodium dodecylbenzenesulfonate (SDBS). The experimental results were analyzed using kinetics and the isothermal model fitting and spectrogram (FTIR, XPS). This study showed that the application of surfactants could greatly enhance the Pb(II) adsorption capacities of PE and PP by promoting Pb(II) into the fissures. The Pb(II), S, and N contents did not significantly decrease at different depths in the presence of surfactants, and the Pb(II) content without surfactants decreased with an increasing depth. The adsorption behavior was consistent with the Bangham channel diffusion model and the DR model, suggesting that the adsorption process was related to the pore structure of the microplastics. Furthermore, the release of Pb(II) from desorption using high concentration of surfactant solution was less than that of low concentration, it was difficult to release heavy metals primarily because of the crack structure of the microplastics, especially when more surfactant molecules entered the pores. This work contributes to a better understanding of the adsorption mechanism of heavy metals on microplastics in the presence of surfactants, which will better control the ecological risks of microplastics.

Activities of Microplastics (MPs) in Agricultural Soil: A Review of MPs Pollution from the Perspective of Agricultural Ecosystems

Microplastics are emerging persistent pollutants which have attracted increasing attention worldwide. Although microplastics have been widely detected in aquatic environments, their presence in soil ecosystems remains largely unexplored. Plastic debris accumulates in farmland, causing serious environmental problems, which may directly affect food substances or indirectly affect the members in each trophic level of the food chain. This review summarizes the origins, migration, and fate of microplastics in agricultural soils and discusses the interaction between microplastics and the components in farmland from the perspectives of toxicology and accumulation and deduces impacts on ecosystems by linking the organismal response to an ecological role. The effects on farmland ecosystem function are also discussed, emphasizing the supply of agricultural products, food chain pathways, carbon deposition, and nitrogen cycling and soil and water conservation, as microplastic pollution will affect agricultural ecosystems for a long period, posing an ecological risk. Finally, several directions for future research are proposed, which is important for reducing the effect of microplastics in agricultural systems.

Seed-Encapsulation of Desiccation-Tolerant Microorganisms for the Protection of Maize from Drought: Phenotyping Effects of a New Dry Bioformulation

Droughts and high temperatures deeply affect crop production. The use of desiccation-tolerant (or xerotolerant) microorganisms able to protect plants from droughts represents a promising alternative. These xerotolerant microorganisms have previously been used to modulate plant responses and improve their tolerance to drought. In addition, these microorganisms could be stored and used in dry formats, which would improve their viability and resilience at a much lower cost than current market alternatives. In the present study we analyze the possibility of using strains of xerotolerant Actinobacteria in encapsulated format on seeds. Under this formulation, we carried out greenhouse with farming soil with maize plants. Under greenhouse conditions, the plants showed greater resistance to drought, as well as increased growth and production yield, but not as well in field trials. This alternative could represent a useful tool to improve water efficiency in crops for drought-affected areas or affected by water scarcity.

Plastic mulch film induced soil microplastic enrichment and its impact on wind-blown sand and dust

Microplastics (MPs) pollution is being increasingly recognized as a global concern in all environments. Wind-blown sand and dust contaminated by MPs are an important pathway of MPs transport across different environments, which can result in on-site and off-site potential MP pollution. Here, we designed field experiments to detect MPs in surface soil and wind-blown sand and dust in farmlands with and without film mulch in a semi-arid region of northern China. This study provides the first insights into MPs enrichment in wind-blown sand and dust deposited by natural storms. The results reveal that fibers, fragments, and films constitute the major types of MPs in farmland soil and wind-blown sand and dust. The MPs abundances of 1-3 mm, <1 mm, and 3-5 mm items kg^-1 successively decrease. The enrichment of MPs in wind-blown dust is one to two orders of magnitude higher than that in wind-blown sand. For the farmlands with (without) film mulch, the MPs enrichment ratios ranged from 0.22 (0.29) to 1.35 (2.26) in the wind-blown sand and that varied from 1.79 (1.01) to 16.6 (25.79) in the wind-blown dust. Fibers are preferentially transported by wind erosion compared to fragments and films. Soil aggregating processes, wind speed, and MPs shape may influence enrichment in wind-blown sand and dust. Film mulch debris and the application of manure may be the primary sources of MPs in farmland soils. This study further highlights the importance of the transport of airborne MPs from surface soil into the atmosphere. Future research is required to establish the quantitative relationships between the MPs shape, wind speed, and surface soil properties and the MPs enrichment in wind-blown sand and dust.

Field studies on the deterioration of microplastic films from ultra-thin compostable bags in soil

In recent years, some countries have replaced single-use plastic bags with bags manufactured from compostable plastic film that can be used for collecting food wastes and composted together with the waste. Because industrial compost contains undeteriorated fragments of these bags, application to field soil is a potential source of small-sized residues from these bags. This study was undertaken to examine deterioration of these compostable film microplastics (CFMPs) in field soil at three different localities in Italy. Deterioration of CFMPs did not exceed 5.7% surface area reduction during the 12-month experimental period in two sites located in Northern Italy. More deterioration was observed in the Southern site, with 7.2% surface area reduction. Deterioration was significantly increased when fields were amended with industrial compost (up to 9.6%), but not with home compost. Up to 92.9% of the recovered CFMPs were associated with the soil fungus Aspergillus flavus, with 20.1%-71.2% aflatoxin-producing isolates. Application of industrial compost resulted in a significant increase in the percentage of CFMPs associated with A. flavus. This observation provides an argument for government regulation of accumulation of CFMPs and elevation of hazardous fungi levels in agricultural soils that receive industrial compost.

Seasonal variations and feedback from microplastics and cadmium on soil organisms in agricultural fields

Plastic film mulching is an important agricultural technology that plays a critical role in increasing crop yield and maintaining soil moisture. However, long-term coverage and untimely recovery lead to a large amount of plastic residues in soils. This decomposes into smaller plastics over time, which can reduce sowing quality, destroy the soil structure, and have adverse effects on soil organisms. In this study, the seasonal variations and correlations of microplastics and cadmium (Cd) in Wuxi farmland soils of Taihu Lake, China, were investigated in the spring and winter. The microplastics were mainly in the form of films, fibers, and debris and were mainly transparent and black in color. Microplastic abundance reached 890 particles/kg soil, with the majority of microplastics (>72.5%) being 0-500 μm. Polyethylene microplastics were the main polymers, accounting for >54.65%. In addition, the abundance of soil microplastics in the winter was significantly correlated with Cd, indicating that microplastics and heavy metals present a risk of coexposure to soil organisms. Furthermore, the response of in situ earthworms to microplastic-Cd pollution revealed that microplastics can be used as a vector to transfer heavy metals in the soil environment and may accumulate in the bodies of soil organisms. Multiomics techniques demonstrated bacterial community structure dysbiosis and metabolic changes of in situ earthworms under microplastic heavy metal-contaminated soils. The abundance of microplastics in earthworm casts and intestines was higher than that in the soil samples. These results reveal the potential risks from microplastics entering the soil environment and heavy metal pollution in soil ecosystems.

Seeking for a perfect (non-spherical) microplastic particle - The most comprehensive review on microplastic laboratory research

In recent decades, much attention has been paid to microplastic pollution, and research on microplastics has begun to grow exponentially. However, microplastics research still suffers from the lack of standardized protocols and methods for investigation of microplastics under laboratory conditions. Therefore, in this review, we summarize and critically discuss the results of 715 laboratory studies published on microplastics in the last five years to provide recommendations for future laboratory research. Analysis of the data revealed that the majority of microplastic particles used in laboratory studies are manufactured spheres of polystyrene ranging in size from 1 to 50 µm, that half of the studies did not characterize the particles used, and that a minority of studies used aged particles, investigated leaching of chemicals from microplastics, or used natural particles as a control. There is a large discrepancy between microplastics used in laboratory research and those found in the environment, and many laboratory studies suffer from a lack of environmental relevance and provide incomplete information on the microplastics used. We have summarized and discussed these issues and provided recommendations for future laboratory research on microplastics focusing on (i) microplastic selection, (ii) microplastic characterization, and (iii) test design of laboratory research on microplastics.

Strong but reversible sorption on polar microplastics enhanced earthworm bioaccumulation of associated organic compounds

Sorption/desorption of two organic compounds (OCs), phenanthrene (PHE), and 1-nitronaphthalene (1-Nnap) on three polar and one nonpolar polypropylene (PP) microplastics (MPs) and earthworm bioaccumulation of MP associated PHE were systematically studied. Poly-butylene succinate (PBS) with the lowest glass transition temperature (T_g) showed the highest sorption toward PHE and 1-Nnap (K_d: 25,639 ± 276 and 1673 ± 28.8 L kg^-1, respectively), while polylactic acid (PLA) with the highest T_g showed the least sorption (182 ± 5 and near 0), confirming that hydrophobic partition was the main driving force of sorption. However, polar interactions also contributed to the preferential sorption of 1-Nnap on polar poly-hydroxyalkanoates (PHA). Moreover, small particle size favored the sorption of MPs and simulated weathering enhanced sorption on MPs with medium/high T_g. As for desorption, slight hysteresis was observed in most cases with near-zero hysteresis index (HI), and PHE generally had higher HI than 1-Nnap. The simulated digestive solution could further promote the desorption of PHE. The PHE concentrations in earthworms with the presence of 5% PBS or PP MPs in soil were 1.50-2.35 or 1.59-1.75 times that of the control without MPs; and PBS MPs with the smallest particle size showed the greatest enhancement. The results of this study confirmed that polar MPs could strongly but reversibly sorb both polar and nonpolar OCs and hence promote the bioaccumulation of OCs to soil organisms.

Microplastic pollution on the soil and its consequences on the nitrogen cycle: a review

Microplastics (MPs) correspond to plastics between 0.1 μm and 5 mm in diameter, and these can be intentionally manufactured to be microscopic or generated from the fragmentation of larger plastics. Currently, MP contamination is a complicated subject due to its accumulation in the environment. They are a novel surface and a source of nutrients in soils because MPs can serve as a substrate for the colonization of microorganisms. Its presence in soil triggers physical (stability of aggregates, soil bulk density, and water dynamics), chemical (nutrients availability, organic matter, and pH), and biological changes (microbial activity and soil fauna). All these changes alter organic matter degradation and biogeochemical cycles such as the nitrogen (N) cycle, which is a key predictor of ecological stability and management in the terrestrial ecosystem. This review aims to explore how MPs affect the N cycle in the soil, the techniques to detect it in soil, and their effects on the physicochemical and biological parameters, emphasizing the impact on the main bacterial groups, genes, and enzymes associated with the different stages of the N cycle.

Impact of microplastics on bioaccumulation of heavy metals in rape (Brassica napus L.)

Microplastics have become a global environmental problem due to the ubiquitous existence. The impacts of microplastics on heavy metals behaviors in aquatic environment are widely investigated, however, the impacts of microplastics on bioaccumulation of heavy metals in vegetables in terrestrial environment are seldom investigated. Herein, batch experiments were carried out, the microplastics (0.001%, 0.01%, 0.1%) and heavy metal (50, 100 mg/kg Cu²⁺ or 25, 50 mg/kg Pb²⁺) were single or combined spiked into soil to cultivate rapes (Brassica napus L.) in greenhouse. Copper and lead contents of rapes in MP0.1+Cu100 and MP0.1+Pb50 treatments reached 38.9 mg/kg and 9.4 mg/kg, which were significantly (p < 0.05) higher than those of Cu100 (35.3 mg/kg) and Pb50 (8.7 mg/kg) treatments, respectively. Results showed that microplastics in soil would facilitate heavy metals entering rape plants. In addition, contents of total chlorophyll, soluble sugar, vitamin C, malondialdehyde contents, activities of superoxide dismutase and guaiacol peroxidase, as well as related gene expression were analyzed to investigate the toxic effects of these pollutants (microplastics, Cu, and Pb) to rape plants. Malondialdehyde contents of rapes in MP0.1+Cu50, MP0.1+Cu100, MP0.1+Pb25, and MP0.1+Pb50 treatments reached 0.102 mmol/mg Protein, 0.123 mmol/mg Protein, 0.101 mmol/mg Protein, and 0.119 mmol/mg Protein, which were 1.42, 1.37, 1.46, and 1.45 times of those in Cu50, Cu100, Pb25, and Pb50 treatments, respectively. The changes of malondialdehyde content, activities of superoxide dismutase and guaiacol peroxidase, as well as contents of sugar and vitamin C indicated that microplastics in soil would bring severer damage and deteriorate quality of rape plants. The data in this study indicated that microplastics would increase the bioaccumulation of heavy metals in vegetables and damage to vegetables.

Systematic assessment of data quality and quality assurance/quality control (QA/QC) of current research on microplastics in biosolids and agricultural soils

Although a growing number of studies have reported microplastics (MPs) in biosolids and soils, there are significant differences in the concentrations found across different regions worldwide. This has raised questions about the quality of studies due to a lack of standardized sampling and analysis methods for detecting MPs in such complex samples. In this study, we applied a systematic quantitative literature review (SQLR) methodology to analyze studies reporting MPs in sludge/biosolids and agricultural soils. We also assessed the quality of individual studies on MPs in sludge/biosolids and soils based on the inclusion of quality assurance/quality control (QA/QC) procedures. There is limited understanding about MPs in soils with a history of biosolid application with only 9% of publications reporting MPs in biosolid-amended soil. There was almost eight orders of magnitude difference (3.4 × 10^-5 to 9.4 × 10³ particles/g) between the highest concentrations of MPs in sludge/biosolid samples compared to the lowest virgin soil samples. The literature shows a consistency in the polymer types (polyester, PP and PE) and morphotypes (fibres and fragments) of MPs most frequently detected in biosolids and soils, suggesting a potential role of biosolids in soils MP pollution. Despite the large variations in the sizes of MPs, there was a negative correlation between the lowest size detected and concentrations reported. This indicates that current concentrations of MPs are influenced by the detection size. Our assessment shows that the majority of studies to-date lack critical QA/QC measures, particularly field blank, positive control and method validation. This highlights an urgent need for quality improvement of future research in this field to produce reliable data, ultimately crucial to assess the risk of MPs and derive suitable environmental guidelines. It is recommended that MPs studies methodically include QA/QC protocols at every step of the process to ensure the integrity of the data that is published.

Informal landfill contributes to the pollution of microplastics in the surrounding environment

A large amount of plastic waste is generated yearly worldwide, and landfills are commonly used for the disposal of plastic waste. However, burying in landfill does not get rid of the plastic waste but leave the problem to the future. Previous works have showed that microplastics are presented in the landfill refuse and leachate, which might be potential sources of microplastics. In this work, characteristics of microplastic pollution in an informal landfill in South China were studied. Landfill refuse, underlying soil, leachate, and groundwater samples were collected from different sites within and around the landfill. Results show that microplastics in the landfill refuse and underlying soil varied from 590 to 103,080 items/kg and from 570 to 14,200 items/kg, respectively. Most of the microplastics are fibrous, small sized, and transparent. Polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) are major polymer types. Scanning electron microscope (SEM) images and Fourier Transform Infrared (FTIR) spectra of the microplastic samples indicate varying degree of weathering. Microplastic abundances in the landfill leachate and groundwater ranged from 3 to 25 items/L and from 11 to 17 items/L, respectively. Microplastics detected in the landfill leachate and groundwater are even smaller compared with those in the refuse and underlying soil and their polymer types are more diverse. This work demonstrated that microplastics presented in an informal landfill without sufficient protection can leak out to the surrounding environment. The microplastic pollution originated from informal landfills should receive more attentions.

Investigating the Human Impacts and the Environmental Consequences of Microplastics Disposal into Water Resources

During the last decades, one of the most contentious environmental issues has been the investigation of the fate of microplastics (MPs) and detrimental consequences in natural and water resources worldwide. In this respect, it is critical research firstly to track the ways in which MPs are determined as key anthropogenic pollutants in terms of ecological risk and secondly to plan feasible policies under which the role of science and society in tackling this global issue in the future should be prioritized. In this study, a systematic theoretical, technical, and planning analysis was developed in alignment with a Scopus search deployed in the second half of the year 2021 and covering a wide chronological range (from 1970s onwards) and thematic contexts of analysis by using keywords and key phrases organized into two groups. The document results were graphically represented, revealing the main scientific focus of studies. Subsequently, our study investigated the quantitative assessment methods of MPs in marine environments, denoting the range of standard procedures applied for collecting and analyzing samples of water, bottom sediments, and coastal deposits. The technological part of the study includes the presentation of the relevant analytical techniques applied for MPs tracking and monitoring in water resources, determining the wide spectrum of plastic compounds traced. Of particular interest was the determination of environmental depletion and human implications caused, even by extremely low concentrations of MPs, for marine biota, posing potential risks to marine ecosystems, biodiversity, and food availability. Finally, the research proposed the challenges of actions needed to support scientific, industry, policy, and civil society communities to curb the ongoing flow of MPs and the toxic chemicals they contain into water resources, while rethinking the ways of plastics consumption by humanity.

Effects of different concentrations and types of microplastics on bacteria and fungi in alkaline soil

The threat of microplastic (MP) pollution of soil ecosystems has aroused global concern; however, relatively few studies have focused on the effects of MPs on both bacterial and fungal communities in soil. In this study, a 310-day soil incubation experiment was designed to examine the effects of 7% and 14% (W/W) polyethylene (PE), polystyrene (PS), and polyvinyl chloride (PVC) MPs on soil enzyme activities and soil bacterial as well as fungal communities. The findings revealed that all three kinds of MPs stimulated soil enzyme activities, with 14% PVC, 7% PS, and 14% PE having the greatest impact on the activities of catalase, urease, and alkaline phosphatase. MPs did not change the types but the relative abundance of these phyla in soil. MPs mainly increased the abundance of Proteobacteria, Actinobacteria, and Ascomycota as well as declined the abundance of Acidobacteria, Basidiomycota, and Chytridiomycota. The response of fungi to MPs was stronger than that of bacteria, and the diversity of fungal communities was more sensitive to the impact of MPs than that of bacterial communities. PVC had the greatest impact on the diversity of microbial communities. PICRUSt analysis revealed that MPs mainly promoted the metabolic function of soil bacteria. Based on the FUNGuid tool, it was found that MPs had significant effects on fungi, which were closely related to plant growth. These results indicate that the impact of MPs on soil microbial communities depends on the type and concentration of MPs and that bacteria and fungi are affected differently by MPs. Future studies could be focused on the different effects of MPs on fungi and bacteria, and what effect will this difference have on plant growth.

Recent endeavors in microbial remediation of micro- and nanoplastics

Petrochemical plastics are frequently utilized in our daily lives for various purposes such as packaging and transportation, but their burden on the environment is considered one of the most man-made pollution crises. These pollutants are slowly fragmented in the environment into microplastics and nanoplastics by consolidated actions of abiotic and biotic factors. Microplastics and nanoplastics can easily be dispersed in the atmosphere and be harmful to all kinds of life. As a result, the remediation of micro- and nanoplastics has recently received a tremendous research impetus in the realm of an ecologically benign approach, notably microbial-based remediation. Thus, the current article looks at the formation, properties, analysis, and biological effects of micro- and nanoplastics. The content is then streamlined towards a comprehensive discussion on microbial-mediated degradation of microplastics and nanoplastics, with an emphasis on front-line bacteria and enzymes, as well as remediation mechanisms. Further, technologies for the removal of microplastics and nanoplastics from the environment are presented for possible remedial considerations. An attempt is also made to highlight the practical snags of microbial plastic degradation while aiming to alleviate the environmental burden of plastic waste.

Microplastics in the Koshi River, a remote alpine river crossing the Himalayas from China to Nepal

Studies of microplastics (MPs) in remote, trans-boundary and alpine rivers are currently lacking. To understand the sinks and transport mechanisms of MPs, this study investigated the distributions and sources of MPs in the surface waters and sediments of five tributaries of the Koshi River (KR), a typical alpine river in the Himalayas between China and Nepal. Mean abundances of MPs in water and sediment were 202 ± 100 items/m³ and 58 ± 27 items/kg, dry weight, respectively. The upstream tributary, Pum Qu in China, had the smallest abundance of MPs, while the middle tributary, Sun Koshi in Nepal, had the greatest abundance. Compared to international values in rivers, contamination of the KR with MPs was low to moderate. Fibers represented 98% of all MP particles observed, which consisted of polyethylene, polyethyleneterephthalate, polyamide, polypropylene, and polystyrene. Blue and black MPs were prevalent, and small MPs (<1 mm) accounted for approximately 60% of all MPs. Atmospheric transmission and deposition were considered to be the principal sources of MPs in the upstream tributary. The results imply that point sources associated with mostly untreated sewage effluents and solid wastes from households, major settlements, towns, and cities were most important sources of MPs in the KR. Non-point sources from agricultural runoff and atmospheric transport and deposition in the middle stream tributaries also contribute a part of microplastics, while the least amount was from fishing in the downstream tributary. Urbanization, agriculture, traffic, and tourism contributed to pollution in the KR by MPs. Equations to predict abundances of MPs based on river altitudes revealed that different trends were affected by both natural and human factors within the KR basin. This study presents new insights into the magnitude of MP pollution of a remote alpine river and provides valuable data for developing MP monitoring and mitigation strategies in similar environments worldwide.

Ion-Driven Self-Assembly of Lanthanide Bis-phthalocyaninates into Conductive Quasi-MOF Nanowires: an Approach toward Easily Recyclable Organic Electronics

Controlled self-assembly and rapid disintegration of supramolecular nanowires is potentially useful for ecology-friendly organic electronics. Herein, a novel method exploiting the binding between crown-substituted double-decker lanthanide phthalocyaninates (ML₂, M = Lu, Ce, Tb) and K⁺ ions is applied for the one-step fabrication of macroscopically long conductive one-dimensional quasi-metal-organic frameworks. Their properties are controlled by the size of the lanthanide ion guiding the assembly through either intra- or intermolecular interactions. A LuL₂ linker with a small interdeck distance yields fully conjugated intermolecular-bonded K⁺-LuL₂ nanowires with a thickness of 10-50 nm, a length of up to 50 μm, and a conductivity of up to 11.4 S cm^-1, the highest among them being reported for phthalocyanine assemblies. The large size of CeL₂ and TbL₂ leads to the formation of mixed intra- and intermolecular K⁺-ML₂ phases with poor electric properties. A field-assisted method is developed to deposit aligned conductive K⁺-LuL₂ assemblies on solids. The solid-supported nanowires can be disintegrated into starting components in a good aprotic solvent for further recycling.