Cellulose hydrolysis by bacteria and fungi

Tailored catalysts for plant cell-wall degradation: redesigning the exo/endo preference of Cellvibrio japonicus arabinanase 43A

Enzymes acting on polymeric substrates are frequently classified as exo or endo, reflecting their preference for, or ignorance of, polymer chain ends. Most biotechnological applications, especially in the field of polysaccharide degradation, require either endo- or exo-acting hydrolases, or they harness the essential synergy between these two modes of action. Here, we have used genomic data in tandem with structure to modify, radically, the chain-end specificity of the Cellvibrio japonicus exo-arabinanase CjArb43A. The structure of Bacillus subtilis endo-arabinanase 43A (BsArb43A) in harness with chain-end recognition kinetics of CjArb43A directed a rational design approach that led to the conversion of the Cellvibrio enzyme from an exo to an endo mode of action. One of the exo-acting mutants, D35L/Q316A, displays similar activity to WT CjArb43A and the removal of the steric block mediated by the side chains of Gln-316 and Asp-53 at the -3 subsite confers its capacity to attack internal glycoside bonds. This study provides a template for the production of tailored industrial catalysts. The introduction of subtle changes informed by comparative 3D structural and genomic data can lead to fundamental changes in the mode of action of these enzymes.

Chemical biology of the sugar code

A high-density coding system is essential to allow cells to communicate efficiently and swiftly through complex surface interactions. All the structural requirements for forming a wide array of signals with a system of minimal size are met by oligomers of carbohydrates. These molecules surpass amino acids and nucleotides by far in information-storing capacity and serve as ligands in biorecognition processes for the transfer of information. The results of work aiming to reveal the intricate ways in which oligosaccharide determinants of cellular glycoconjugates interact with tissue lectins and thereby trigger multifarious cellular responses (e.g. in adhesion or growth regulation) are teaching amazing lessons about the range of finely tuned activities involved. The ability of enzymes to generate an enormous diversity of biochemical signals is matched by receptor proteins (lectins), which are equally elaborate. The multiformity of lectins ensures accurate signal decoding and transmission. The exquisite refinement of both sides of the protein-carbohydrate recognition system turns the structural complexity of glycans--a demanding but essentially mastered problem for analytical chemistry--into a biochemical virtue. The emerging medical importance of protein-carbohydrate recognition, for example in combating infection and the spread of tumors or in targeting drugs, also explains why this interaction system is no longer below industrial radarscopes. Our review sketches the concept of the sugar code, with a solid description of the historical background. We also place emphasis on a distinctive feature of the code, that is, the potential of a carbohydrate ligand to adopt various defined shapes, each with its own particular ligand properties (differential conformer selection). Proper consideration of the structure and shape of the ligand enables us to envision the chemical design of potent binding partners for a target (in lectin-mediated drug delivery) or ways to block lectins of medical importance (in infection, tumor spread, or inflammation).

Ancient Origin of Glycosyl Hydrolase Family 9 Cellulase Genes

While it is widely accepted that most animals (Metazoa) do not have endogenous cellulases, relying instead on intestinal symbionts for cellulose digestion, the glycosyl hydrolase family 9 (GHF9) cellulases found in the genomes of termites, abalone, and sea squirts could be an exception. Using information from expressed sequence tags, we show that GHF9 genes (subgroup E2) are widespread in Metazoa because at least 11 classes in five phyla have expressed GHF9 cellulases. We also demonstrate that eukaryotic GHF9 gene families are ancient, forming distinct monophyletic groups in plants and animals. As several intron positions are also conserved between four metazoan phyla then, contrary to the still widespread belief that cellulases were horizontally transferred to animals relatively recently, GHF9 genes must derive from an ancient ancestor. We also found that sequences isolated from the same animal phylum tend to group together, and in some deuterostomes, GHF9 genes are characterized by substitutions in catalytically important sites. Several paralogous subfamilies of GHF9 can be identified in plants, and genes from primitive species tend to arise basally to angiosperm representatives. In contrast, GHF9 subgroup E2 genes are relatively rare in bacteria.

Structural and biochemical studies of GH family 12 cellulases: improved thermal stability, and ligand complexes

In this review we will describe how we have gathered structural and biochemical information from several homologous cellulases from one class of glycoside hydrolases (GH family 12), and used this information within the framework of a protein-engineering program for the design of new variants of these enzymes. These variants have been characterized to identify some of the positions and the types of mutations in the enzymes that are responsible for some of the biochemical differences in thermal stability and activity between the homologous enzymes. In this process we have solved the three-dimensional structure of four of these homologous GH 12 cellulases: Three fungal enzymes, Humicola grisea Cel12A, Hypocrea jecorina Cel12A and Hypocrea schweinitzii Cel12A, and one bacterial, Streptomyces sp. 11AG8 Cel12A. We have also determined the three-dimensional structures of the two most stable H. jecorina Cel12A variants. In addition, four ligand-complex structures of the wild-type H. grisea Cel12A enzyme have been solved and have made it possible to characterize some of the interactions between substrate and enzyme. The structural and biochemical studies of these related GH 12 enzymes, and their variants, have provided insight on how specific residues contribute to protein thermal stability and enzyme activity. This knowledge can serve as a structural toolbox for the design of Cel12A enzymes with specific properties and features suited to existing or new applications.

Kinetic and structural optimization to catalysis at low temperatures in a psychrophilic cellulase from the Antarctic bacterium Pseudoalteromonas haloplanktis

The cold-adapted cellulase CelG has been purified from the culture supernatant of the Antarctic bacterium Pseudoalteromonas haloplanktis and the gene coding for this enzyme has been cloned, sequenced and expressed in Escherichia coli. This cellulase is composed of three structurally and functionally distinct regions: an N-terminal catalytic domain belonging to glycosidase family 5 and a C-terminal cellulose-binding domain belonging to carbohydrate-binding module family 5. The linker of 107 residues connecting both domains is one of the longest found in cellulases, and optimizes substrate accessibility to the catalytic domain by drastically increasing the surface of cellulose available to a bound enzyme molecule. The psychrophilic enzyme is closely related to the cellulase Cel5 from Erwinia chrysanthemi. Both kcat and kcat/K(m) values at 4 degrees C for the psychrophilic cellulase are similar to the values for Cel5 at 30-35 degrees C, suggesting temperature adaptation of the kinetic parameters. The thermodynamic parameters of activation of CelG suggest a heat-labile, relatively disordered active site with low substrate affinity, in agreement with the experimental data. The structure of CelG has been constructed by homology modelling with a molecule of cellotetraose docked into the active site. No structural alteration related to cold-activity can be found in the catalytic cleft, whereas several structural factors in the overall structure can explain the weak thermal stability, suggesting that the loss of stability provides the required active-site mobility at low temperatures.

The modular xylanase Xyn10A fromRhodothermus marinusis cell-attached, and its C-terminal domain has several putative homologues among cell-attached proteins within the phylum Bacteroidetes

Until recently, the function of the fifth domain of the thermostable modular xylanase Xyn10A from Rhodothermus marinus was unresolved. A putative homologue to this domain was however identified in a mannanase (Man26A) from the same microorganism which raised questions regarding a common function. An extensive search of all accessible data-bases as well as the partially sequenced genomes of R. marinus and Cytophaga hutchinsonii showed that homologues of this domain were encoded by multiple genes in microorganisms in the phylum Bacteroidetes. Moreover, the domain occurred invariably at the C-termini of proteins that were predominantly extra-cellular/cell attached. A primary structure motif of three conserved regions including structurally important glycines and a proline was also identified suggesting a conserved 3D fold. This bioinformatic evidence suggested a possible role of this domain in mediating cell attachment. To confirm this theory, R. marinus was grown, and activity assays showed that the major part of the xylanase activity was connected to whole cells. Moreover, immunocytochemical detection using a Xyn10A-specific antibody proved presence of Xyn10A on the R. marinus cell surface. In the light of this, a revision of experimental data present on both Xyn10A and Man26A was performed, and the results all indicate a cell-anchoring role of the domain, suggesting that this domain represents a novel type of module that mediates cell attachment in proteins originating from members of the phylum Bacteroidetes.

Molecular characterization of a β-1,4-endoglucanase from an endophytic Bacillus pumilus strain

Endophytes comprise mainly microorganisms that colonize inner plant tissues, often living with the host in a symbiotic manner. Several ecological roles have been assigned to endophytic fungi and bacteria, such as antibiosis to phytopathogenic agents and plant growth promotion. Nowadays, endophytes are viewed as a new source of genes, proteins and biochemical compounds that may be used to improve industrial processes. In this study, the gene EglA was cloned from a citrus endophytic Bacillus strain. The EglA encodes a beta-1,4-endoglucanase capable of hydrolyzing cellulose under in vitro conditions. The predicted protein, EglA, has high homology to other bacterial cellulases and shows a modular structure containing a catalytic domain of the glycosyl hydrolase family 9 (GH9) and a cellulose-binding module type 3 (CBM3). The enzyme was expressed in Escherichia coli, purified to homogeneity, and characterized. EglA has an optimum pH range of 5-8, and remarkable heat stability, retaining more than 85% activity even after a 24-h incubation at pH 6-8.6. This characteristic is an important feature for further applications of this enzyme in biotechnological processes in which temperatures of 50-60 degrees C are required over long incubation periods.

Family 6 carbohydrate binding modules recognize the non-reducing end of beta-1,3-linked glucans by presenting a unique ligand binding surface

Enzymes that hydrolyze insoluble complex polysaccharide structures contain non-catalytic carbohydrate binding modules (CBMS) that play a pivotal role in the action of these enzymes against recalcitrant substrates. Family 6 CBMs (CBM6s) are distinct from other CBM families in that these protein modules contain multiple distinct ligand binding sites, a feature that makes CBM6s particularly appropriate receptors for the beta-1,3-glucan laminarin, which displays an extended U-shaped conformation. To investigate the mechanism by which family 6 CBMs recognize laminarin, we report the biochemical and structural properties of a CBM6 (designated BhCBM6) that is located in an enzyme, which is shown, in this work, to display beta-1,3-glucanase activity. BhCBM6 binds beta-1,3-glucooligosaccharides with affinities of approximately 1 x 10(5) m(-1). The x-ray crystal structure of this CBM in complex with laminarihexaose reveals similarity with the structures of other CBM6s but a unique binding mode. The binding cleft in this protein is sealed at one end, which prevents binding of linear polysaccharides such as cellulose, and the orientation of the sugar at this site prevents glycone extension of the ligand and thus conferring specificity for the non-reducing ends of glycans. The high affinity for extended beta-1,3-glucooligosaccharides is conferred by interactions with the surface of the protein located between the two binding sites common to CBM6s and thus reveals a third ligand binding site in family 6 CBMs. This study therefore demonstrates how the multiple binding clefts and highly unusual protein surface of family 6 CBMs confers the extensive range of specificities displayed by this protein family. This is in sharp contrast to other families of CBMs where variation in specificity between different members reflects differences in the topology of a single binding site.

Digestion of cellulose and xylan by symbiotic bacteria in the intestine of the Indian flying fox (Pteropus giganteus)

Bats (Order Chiroptera) are a widely distributed group of mammals. Pteropus giganteus belongs to the Suborder Megachiroptera. This bat consumes fruits and leaves as their major food. Cellulose and xylan are the major composition of leaves. As they consume leaves in their diet, their digestive tract must contain cellulolytic and xylanolytic bacteria which help in the digestion of cellulose and xylan. The cellulolytic and xylanolytic bacteria were isolated and screened on Berg's agar containing cellulose and xylan. The bacteria isolated were characterized biochemically and found to be Proteus vulgaris, Proteus mirabilis, Citrobacter freundii, Serratia liquefaciens and Klebsiella oxytoca. These bacteria help in digestion of cellulose and xylan in the diet of the bat, P. giganteus. Here we show that leaves are also used as a carbohydrate source by these bats. An insectivorous bat, Hipposideros fulvus, was used as a control and does not possess cellulolytic and xylanolytic bacteria.

Synergistic activity ofPaenibacillussp. BP-23 cellobiohydrolase Cel48C in association with the contiguous endoglucanase Cel9B and with endo- or exo-acting glucanases fromThermobifida fusca

Cellobiohydrolase Cel48C from Paenibacillus sp. BP-23, an enzyme displaying limited activity on most cellulosic substrates, was assayed for activity in the presence of other bacterial endo- or exocellulases. Significant enhanced activity was observed when Cel48C was incubated in the presence of Paenibacillus sp. BP-23 endoglucanase Cel9B or Thermobifida fusca cellulases Cel6A and Cel6B, indicating that Cel48C acts synergistically with them. Maximum synergism rates on bacterial microcrystalline cellulose or filter paper were obtained with a mixture of Paenibacillus cellulases Cel9B and Cel48C, accompanied by T. fusca exocellulase Cel6B. Synergism was also observed in cell extracts from recombinant clone E. coli pUCel9-Cel48 expressing the two contiguous Paenibacillus cellulases Cel9B and Cel48C. The enhanced cellulolytic activity displayed by the cellulase mixtures assayed could be used as an efficient tool for biotechnological applications like pulp and paper manufacturing.

Reduction of starch granule size by expression of an engineered tandem starch-binding domain in potato plants

Granule size is an important parameter when using starch in industrial applications. An artificial tandem repeat of a family 20 starch-binding domain (SBD2) was engineered by two copies of the SBD derived from Bacillus circulans cyclodextrin glycosyltransferase via the Pro-Thr-rich linker peptide from Xyn10A from Cellulomonas fimi. SBD2 and a single SBD were introduced into the amylose-free potato mutant, amf, using appropriate signal sequences. The accumulation of SBD2 into transgenic starch granules was much higher than that of SBD. In a number of transformants, particularly amfSS3, the starch granules were much smaller than in control plants. The amfSS3 mean granule size was 7.8 microm, compared with 15.2 microm in the control, whereas other starch properties were unaltered. This new starch combines the advantage of the high purity of potato starch with that of the small granule size of other crop species, such as cassava, taro and wheat. This starch may find application in the manufacture of biodegradable plastic films. Both genes were also expressed in Escherichia coli and the affinity for soluble starch of the purified recombinant proteins was determined. SBD2 had an approximately 10-fold higher affinity for starch than SBD, indicating that the two appended SBDs act in synergy when binding to their target polysaccharide ligand.

Engineering a bifunctional starch–cellulose cross-bridge protein

Biodegradable starch- and cellulose-based polymers have a range of properties which make them suitable for use in a wide array of biomedical applications ranging from bone replacement to engineering of tissue scaffolds and drug delivery systems. A novel polysaccharide cross-bridging protein was designed which was comprised of a cellulose-binding domain from Clostridium cellulovorans (CBD(clos)) and a starch-binding domain from Aspergillus niger B1 (SBD(Asp)). The two genes were fused in-frame via a synthetic elastin gene to construct a Cellulose/Starch Cross bridging Protein (CSCP). Recombinant CSCP was expressed in Escherichia coli, and successfully refolded from inclusion bodies. CSCP demonstrated cross-bridging ability in different model systems composed of insoluble or soluble starch and cellulose. The aspect that different carbohydrate-binding module maintain their binding capacity over a wide range of conditions, without the need for chemical reactions, makes them attractive domains for designing new classes of chimeric polysaccharide-binding domains which demonstrate potential for use in a wide range of biomaterials.

Rational affinity purification of native Streptomyces family 10 xylanase

Xylanase SoXyn10A from Streptomyces olivaceoviridis E-86 comprises a family 10 catalytic module linked to a family 13 carbohydrate-binding module (SoCBM13). The SoCBM13 has a beta-trefoil structure, with binding sites in each subdomain (alpha, beta and gamma). Subdomain alpha, but not subdomains beta and gamma, binds tightly to lactose. It was, therefore, thought that immobilized lactose could be used for the affinity purification of SoXyn10A. Lactosyl-Sepharose was prepared and tested as an affinity matrix. SoXyn10A produced from the cloned xyn10A gene by Escherichia coli, and native SoXyn10A in culture supernatants from S. olivaceoviridis, were purified to homogeneity in a single step by affinity chromatography using this matrix. This simple purification of SoXyn10A makes the enzyme an attractive candidate for applications requiring xylanase. The CBM also has the potential for use as an affinity tag for the purification of other proteins.

The family 6 carbohydrate binding module CmCBM6-2 contains two ligand-binding sites with distinct specificities

The microbial degradation of the plant cell wall is an important biological process, representing a major component of the carbon cycle. Enzymes that mediate the hydrolysis of this composite structure are modular proteins that contain non-catalytic carbohydrate binding modules (CBMs) that enhance catalytic activity. CBMs are grouped into sequence-based families, and in a previous study we showed that a family 6 CBM (CBM6) that interacts with xylan contains two potential ligand binding clefts, designated cleft A and cleft B. Mutagenesis and NMR studies showed that only cleft A in this protein binds to xylan. Family 6 CBMs bind to a range of polysaccharides, and it was proposed that the variation in ligand specificity observed in these proteins reflects the specific cleft that interacts with the target carbohydrate. Here the biochemical properties of the C-terminal cellulose binding CBM6 (CmCBM6-2) from Cellvibrio mixtus endoglucanase 5A were investigated. The CBM binds to the beta1,4-beta1,3-mixed linked glucans lichenan and barley beta-glucan, cello-oligosaccharides, insoluble forms of cellulose, the beta1,3-glucan laminarin, and xylooligosaccharides. Mutagenesis studies, informed by the crystal structure of the protein (presented in the accompanying paper, Pires, V. M. R., Henshaw, J. L., Prates, J. A. M., Bolam, D., Ferreira, L. M. A. Fontes, C. M. G. A., Henrissat, B., Planas, A., Gilbert, H. J., Czjzek, M. (2004) J. Biol. Chem. 279, 21560-21568), show that both cleft A and B can accommodate cello-oligosaccharides and laminarin displays a preference for cleft A, whereas xylooligosaccharides exhibit absolute specificity for this site, and the beta1,4,-beta1,3-mixed linked glucans interact only with cleft B. The binding of CmCBM6-2 to insoluble cellulose involves synergistic interactions between cleft A and cleft B. These data show that CmCBM6-2 contains two binding sites that display differences in ligand specificity, supporting the view that distinct binding clefts with different specificities can contribute to the variation in ligand recognition displayed by family 6 CBMs. This is in sharp contrast to other CBM families, where variation in ligand binding is a result of changes in the topology of a single carbohydrate-binding site.

Ruminococcus albus 8 mutants defective in cellulose degradation are deficient in two processive endocellulases, Cel48A and Cel9B, both of which possess a novel modular architecture

The cellulolytic bacterium Ruminococcus albus 8 adheres tightly to cellulose, but the molecular biology underpinning this process is not well characterized. Subtractive enrichment procedures were used to isolate mutants of R. albus 8 that are defective in adhesion to cellulose. Adhesion of the mutant strains was reduced 50% compared to that observed with the wild-type strain, and cellulose solubilization was also shown to be slower in these mutant strains, suggesting that bacterial adhesion and cellulose solubilization are inextricably linked. Two-dimensional polyacrylamide gel electrophoresis showed that all three mutants studied were impaired in the production of two high-molecular-mass, cell-bound polypeptides when they were cultured with either cellobiose or cellulose. The identities of these proteins were determined by a combination of mass spectrometry methods and genome sequence data for R. albus 8. One of the polypeptides is a family 9 glycoside hydrolase (Cel9B), and the other is a family 48 glycoside hydrolase (Cel48A). Both Cel9B and Cel48A possess a modular architecture, Cel9B possesses features characteristic of the B(2) (or theme D) group of family 9 glycoside hydrolases, and Cel48A is structurally similar to the processive endocellulases CelF and CelS from Clostridium cellulolyticum and Clostridium thermocellum, respectively. Both Cel9B and Cel48A could be recovered by cellulose affinity procedures, but neither Cel9B nor Cel48A contains a dockerin, suggesting that these polypeptides are retained on the bacterial cell surface, and recovery by cellulose affinity procedures did not involve a clostridium-like cellulosome complex. Instead, both proteins possess a single copy of a novel X module with an unknown function at the C terminus. Such X modules are also present in several other R. albus glycoside hydrolases and are phylogentically distinct from the fibronectin III-like and X modules identified so far in other cellulolytic bacteria.

A possible role of cellulose-binding protein A (CBPA) in the adhesion of Eubacterium cellulosolvens 5 to cellulose

The cellulose-binding protein A (CBPA) of Eubacterium cellulosolvens 5 is a modular enzyme comprised of a catalytic domain, a cellulose-binding domain and a cell wall-binding domain. Cellobiose-grown cells changed their adhesion ability to cellulose depending on the growth phase. On the other hand, carboxymethyl cellulose (CMC)-grown cells bound to cellulose regardless of their growth phase. The distribution of CBPA in the culture supernatant and cell fractions changed depending on the carbon source contained in the medium and growth phase. The cellobiose-grown cells harvested from the culture of the late stationary growth phase did not bind to cellulose, but their adhesion ability was recovered by treatment with recombinant CBPA. Moreover, cellobiose-grown cells harvested from the culture of an early exponential growth phase bound to cellulose, but their adhesion ability was inhibited by treatment with anti-CBPA antiserum. CBPA rapidly decreased the viscosity of CMC, indicating that CBPA was endoglucanase. The results obtained in this study indicate that CBPA plays an important role in the adhesion of E. cellulosolvens 5 cells to cellulose.

Fusion of family 2b carbohydrate-binding module increases the catalytic activity of a xylanase from Thermotoga maritima to soluble xylan

A family 2b carbohydrate-binding module from Streptomyces thermoviolaceus STX-II was fused at the carboxyl-terminus of XynB, a thermostable and single domain family 10 xylanase from Thermotoga maritima, to create a chimeric xylanase. The chimeric enzyme (XynB-CBM2b) was purified and characterized. It displayed a pH-activity profile similar to that of XynB and was stable up to 90 degrees C. XynB-CBM2b bound to insoluble birchwood and oatspelt xylan. Whereas its hydrolytic activities toward insoluble xylan and p-nitrophenyl-beta-xylopyranoside were similar to those of XynB, its activity toward soluble xylan was moderately higher than that of XynB.

Evidence for the presence of a cellulase gene in the last common ancestor of bilaterian animals

Until recently, the textbook view of cellulose hydrolysis in animals was that gut-resident symbiotic organisms such as bacteria or unicellular eukaryotes are responsible for the cellulases produced. This view has been challenged by the characterization and sequencing of endogenous cellulase genes from some invertebrate animals, including plant-parasitic nematodes, arthropods and a mollusc. Most of these genes are completely unrelated in terms of sequence, and their evolutionary origins remain unclear. In the case of plant-parasitic nematodes, it has been suggested that their ancestor obtained a cellulase gene via horizontal gene transfer from a prokaryote, and similar suggestions have been made about a cellulase gene recently discovered in a sea squirt. To improve understanding about the evolution of animal cellulases, we searched for all known types of these enzymes in GenBank, and performed phylogenetic comparisons. Low phylogenetic resolution was found among most of the sequences examined, however, positional identity in the introns of cellulase genes from a termite, a sea squirt and an abalone provided compelling evidence that a similar gene was present in the last common ancestor of protostomes and deuterostomes. In a different enzyme family, cellulases from beetles and plant-parasitic nematodes were found to cluster together. This result questions the idea of lateral gene transfer into the ancestors of the latter, although statistical tests did not allow this possibility to be ruled out. Overall, our results suggest that at least one family of endogenous cellulases may be more widespread in animals than previously thought.

Molecular characterization and expression in Escherichia coli of three beta-1,3-glucanase genes from Lysobacter enzymogenes strain N4-7

Lysobacter enzymogenes strain N4-7 produces multiple biochemically distinct extracellular beta-1,3-glucanase activities. The gluA, gluB, and gluC genes, encoding enzymes with beta-1,3-glucanase activity, were identified by a reverse-genetics approach following internal amino acid sequence determination of beta-1,3-glucanase-active proteins partially purified from culture filtrates of strain N4-7. Analysis of gluA and gluC gene products indicates that they are members of family 16 glycoside hydrolases that have significant sequence identity to each other throughout the catalytic domain but that differ structurally by the presence of a family 6 carbohydrate-binding domain within the gluC product. Analysis of the gluB gene product indicates that it is a member of family 64 glycoside hydrolases. Expression of each gene in Escherichia coli resulted in the production of proteins with beta-1,3-glucanase activity. Biochemical analyses of the recombinant enzymes indicate that GluA and GluC exhibit maximal activity at pH 4.5 and 45 degrees C and that GluB is most active between pH 4.5 and 5.0 at 41 degrees C. Activity of recombinant proteins against various beta-1,3 glucan substrates indicates that GluA and GluC are most active against linear beta-1,3 glucans, while GluB is most active against the insoluble beta-1,3 glucan substrate zymosan A. These data suggest that the contribution of beta-1,3-glucanases to the biocontrol activity of L. enzymogenes may be due to complementary activities of these enzymes in the hydrolysis of beta-1,3 glucans from fungal cell walls.

Purification, characterization, cDNA cloning and nucleotide sequencing of a cellulase from the yellow-spotted longicorn beetle, Psacothea hilaris

A cellulase (endo-beta-1,4-glucanase, EC 3.2.1.4) was purified from the gut of larvae of the yellow-spotted longicorn beetle Psacothea hilaris by acetone precipitation and elution from gels after native PAGE and SDS/PAGE with activity staining. The purified protein formed a single band, and the molecular mass was estimated to be 47 kDa. The purified cellulase degraded carboxymethylcellulose (CMC), insoluble cello-oligosaccharide (average degree of polymerization 34) and soluble cello-oligosaccharides longer than cellotriose, but not crystalline cellulose or cellobiose. The specific activity of the cellulase against CMC was 150 micro mol.min-1.(mg protein)-1. TLC analysis showed that the cellulase produces cellotriose and cellobiose from insoluble cello-oligosaccharides. However, a glucose assay linked with glucose oxidase detected a small amount of glucose, with a productivity of 0.072 micro mol.min-1.(mg protein)-1. The optimal pH of P. hilaris cellulase was 5.5, close to the pH in the midgut of P. hilaris larvae. The N-terminal amino-acid sequence of the purified P. hilaris cellulase was determined and a degenerate primer designed, which enabled a 975-bp cDNA clone containing a typical polyadenylation signal to be obtained by PCR and sequencing. The deduced amino-acid sequence of P. hilaris cellulase showed high homology to members of glycosyl hydrolase family 5 subfamily 2, and, in addition, a signature sequence for family 5 was found. Thus, this is the first report of a family 5 cellulase from arthropods.

Structural basis for ligand binding and processivity in cellobiohydrolase Cel6A from Humicola insolens

The enzymatic digestion of cellulose entails intimate involvement of cellobiohydrolases, whose characteristic active-center tunnel contributes to a processive degradation of the polysaccharide. The cellobiohydrolase Cel6A displays an active site within a tunnel formed by two extended loops, which are known to open and close in response to ligand binding. Here we present five structures of wild-type and mutant forms of Cel6A from Humicola insolens in complex with nonhydrolyzable thio-oligosaccharides, at resolutions from 1.7-1.1 A, dissecting the structural accommodation of a processing substrate chain through the active center during hydrolysis. Movement of ligand is facilitated by extensive solvent-mediated interactions and through flexibility in the hydrophobic surfaces provided by a sheath of tryptophan residues.

Exo-mode of action of cellobiohydrolase Cel48C from Paenibacillus sp. BP-23. A unique type of cellulase among Bacillales

Sequence analysis of a Paenibacillus sp. BP-23 recombinant clone coding for a previously described endoglucanase revealed the presence of an additional truncated ORF with homology to family 48 glycosyl hydrolases. The corresponding 3509-bp DNA fragment was isolated after gene walking and cloned in Escherichia coli Xl1-Blue for expression and purification. The encoded enzyme, a cellulase of 1091 amino acids with a deduced molecular mass of 118 kDa and a pI of 4.85, displayed a multidomain organization bearing a canonical family 48 catalytic domain, a bacterial type 3a cellulose-binding module, and a putative fibronectin-III domain. The cloned cellulase, unique among Bacillales and designated Cel48C, was purified through affinity chromatography using its ability to bind Avicel. Maximum activity was achieved at 45 degrees C and pH 6.0 on acid-swollen cellulose, bacterial microcrystalline cellulose, Avicel and cellodextrins, whereas no activity was found on carboxy methyl cellulose, cellobiose, cellotriose, pNP-glycosides or 4-methylumbeliferyl alpha-d-glucoside. Cellobiose was the major product of cellulose hydrolysis, identifying Cel48C as a processive cellobiohydrolase. Although no chromogenic activity was detected from pNP-glycosides, TLC analysis revealed the release of p-nitrophenyl-glycosides and cellodextrins from these substrates, suggesting that Cel48C acts from the reducing ends of the sugar chain. Presence of such a cellobiohydrolase in Paenibacillus sp. BP-23 would contribute to widen up its range of action on natural cellulosic substrates.

Purification and characterization of two beta-glucosidases from a thermo-tolerant yeast Pichia etchellsii

The thermo-tolerant yeast Pichia etchellsii produced two cell-wall-bound inducible beta-glucosidases, BGLI (molecular mass 186 kDa) and BGLII (molecular mass 340 kDa), which were purified by a simple, three-step method, comprising ammonium sulfate precipitation, ion-exchange and hydroxyapatite chromatography. The two enzymes exhibited a similar pH and temperature optima, inhibitory effect by glucose and gluconolactone, and stability in the pH range of 3.0-9.0. Placed in family 3 of glycosylhydrolase families, BGLI was more active on salicin, p-nitrophenyl beta-D-glucopyranoside and alkyl beta-D-glucosides whereas BGLII was most active on cellobiose. k(cat) and K(M) values were determined for a number of substrates and, for BGLI, it was established that the deglycosylation step was equally effective on aryl- and alkyl-glucosides while the glycosylation step varied depending on the substrate used. This information was used to synthesize alkyl-glucosides (up to a chain length of C(10)) using dimethyl sulfoxide stabilized single-phase reaction microenvironment. About 12% molar yield of octyl-glucoside was calculated based on a simple spectrophotometric method developed for its estimation. Further, detailed comparison of properties of the enzymes indicated these to be different from the previously cloned beta-glucosidases from this yeast.

Growth of hyperthermophilic archaeon Pyrococcus furiosus on chitin involves two family 18 chitinases

Pyrococcus furiosus was found to grow on chitin, adding this polysacharide to the inventory of carbohydrates utilized by this hyperthermophilic archaeon. Accordingly, two open reading frames (chiA [Pf1234] and chiB [Pf1233]) were identified in the genome of P. furiosus, which encodes chitinases with sequence similarity to proteins from the glycosyl hydrolase family 18 in less-thermophilic organisms. Both enzymes contain multiple domains that consist of at least one binding domain and one catalytic domain. ChiA (ca. 39 kDa) contains a putative signal peptide, as well as a binding domain (ChiA(BD)), that is related to binding domains associated with several previously studied bacterial chitinases. chiB, separated by 37 nucleotides from chiA and in the same orientation, encodes a polypeptide with two different proline-threonine-rich linker regions (6 and 3 kDa) flanking a chitin-binding domain (ChiB(BD) [11 kDa]), followed by a catalytic domain (ChiB(cat) [35 kDa]). No apparent signal peptide is encoded within chiB. The two chitinases share little sequence homology to each other, except in the catalytic region, where both have the catalytic glutamic acid residue that is conserved in all family 18 bacterial chitinases. The genes encoding ChiA, without its signal peptide, and ChiB were cloned and expressed in Escherichia coli. ChiA exhibited no detectable activity toward chitooligomers smaller than chitotetraose, indicating that the enzyme is an endochitinase. Kinetic studies showed that ChiB followed Michaelis-Menten kinetics toward chitotriose, although substrate inhibition was observed for larger chitooligomers. Hydrolysis patterns on chitooligosaccharides indicated that ChiB is a chitobiosidase, processively cleaving off chitobiose from the nonreducing end of chitin or other chitooligomers. Synergistic activity was noted for the two chitinases on colloidal chitin, indicating that these two enzymes work together to recruit chitin-based substrates for P. furiosus growth. This was supported by the observed growth on chitin as the sole carbohydrate source in sulfur-free media.

Efficient isolation of genes differentially expressed on cellulose by suppression subtractive hybridization in Agaricus bisporus

The production of cellulases on minimal medium in the edible mushroom Agaricus bisporus is regulated by the carbon source: induced by cellulose and repressed by glucose. In order to isolate cellulose-growth specific sequences, a cDNA library from A. bisporus using suppression subtractive hybridization (SSH) was constructed. Northern blot analysis indicated that a high level of enrichment was achieved; 183 clones were isolated. A preliminary screen with cellulose-specific genes of A. bisporus (cel1, cel2, cel3 and cel4) using Southern hybridization resulted in 28 clones to be cel3, and 5 clones were cel2. The remaining 144 clones were sequenced. Partial sequences of the following genes were found: a beta-glucosidase homologue of the blvk gene of Kluyveromyces marxianus; a cellulase homologue of an endoglucanase (avicellase III) of Aspergillus aculeatus, four different xylanases homologue of the xyn genes of different fungi, and one hexose transporter homologue to the hxtA gene of Aspergillus parasiticus. The apparent full-length of two hydrophobins homologue to the abh3 gene of A. bisporus and one histone homologue to the h2a gene of Aspergillus niger were also found. The remaining sequences did not have homology to any known genes.

Molecular cloning of endo-beta-D-1,4-glucanase genes, rce1, rce2, and rce3, from Rhizopus oryzae

Three endoglucanase genes, designated the rce1, rce2, and rce3 genes, were isolated from Rhizopus oryzae as the first cellulase genes from the subdivision ZYGOMYCOTA: All the amino acid sequences deduced from the rce1, rce2, and rce3 genes consisted of three distinct domains: cellulose binding domains, linker domains, and catalytic domains belonging to glycosyl hydrolase family 45. The rce3 gene had two tandem repeated sequences of cellulose binding domains, while rce1 and rce2 had only one. rce1, rce2, and rce3 had various lengths of linker sequences.

Purification and cDNA cloning of a cellulase from abalone Haliotis discus hannai

A cellulase [endo-beta-1,4-D-glucanase (EC 3.2.1.4)] was isolated from the hepatopancreas of abalone Haliotis discus hannai by successive chromatographies on TOYOPEARL CM-650M, hydroxyapatite and Sephacryl S-200 HR. The molecular mass of the cellulase was estimated to be 66 000 Da by SDS/PAGE, thus the enzyme was named HdEG66. The hydrolytic activity of HdEG66 toward carboxymethylcellulose showed optimal temperature and pH at 38 degrees C and 6.3, respectively. cDNAs encoding HdEG66 were amplified by the polymerase chain reaction from an abalone hepatopancreas cDNA library with primers synthesized on the basis of partial amino-acid sequences of HdEG66. By overlapping the nucleotide sequences of the cDNAs, a sequence of 1898 bp in total was determined. The coding region of 1785 bp located at nucleotide position 56-1840 gave an amino-acid sequence of 594 residues including the initiation methionine. The N-terminal region of 14 residues in the deduced sequence was regarded as the signal peptide as it was absent in HdEG66 protein and showed high similarity to the consensus sequence for signal peptides of eukaryote secretory proteins. Thus, matured HdEG66 was thought to consist of 579 residues. The C-terminal region of 453 residues in HdEG66, i.e. approximately the C-terminal three quarters of the protein, showed 42-44% identity to the catalytic domains of glycoside hydrolase family 9 (GHF9)-cellulases from arthropods and Thermomonospora fusca. While the N-terminal first quarter of HdEG66 showed 27% identity to the carbohydrate-binding module (CBM) of a Cellulomonas fimi cellulase, CenA. Thus, the HdEG66 was regarded as the GHF9-cellulase possessing a family II CBM in the N-terminal region. By genomic PCR using specific primers to the 3'-terminal coding sequences of HdEG66-cDNA, a DNA of 2186 bp including three introns was amplified. This strongly suggests that the origin of HdEG66 is not from symbiotic bacteria but abalone itself.

Molecular analysis of the gene encoding a novel cold-adapted chitinase (ChiB) from a marine bacterium, Alteromonas sp. strain O-7

The chitinase B (ChiB) secreted by Alteromonas sp. strain O-7 was purified, and the corresponding gene (chiB) was cloned and sequenced. The open reading frame of the chiB gene encodes a protein of 850 amino acids with a calculated molecular mass of 90,223 Da. ChiB is a modular enzyme consisting of two reiterated domains and a catalytic domain belonging to chitinase family 18. The reiterated domains are composed of chitin-binding domain (ChtBD) type 3 and two fibronectin type III (Fn3)-like domains. Expression plasmids coding for ChiB or deletion derivatives thereof were constructed in Escherichia coli. Deletion analysis showed that the ChtBD of ChiB plays an important role in efficient hydrolysis of insoluble chitin. The optimum pH and temperature of ChiB were 6.0 and 30 degrees C, respectively. The enzyme showed relatively high catalysis, even at low temperatures close to 0 degrees C, and remarkable thermal lability compared to ChiA and ChiC, which are the mesophilic chitinases of the same strain. The kca)/Km value for the ChiB reaction at 10 degrees C was about 4.7 times higher than that of ChiC. These results suggest that ChiB is a cold-adapted enzyme. The RNA transcript of chiB was induced by 1% GlcNAc, and along with a rise in temperature, the RNA transcript showed a tendency to decrease. Thus, among the ChiA, ChiB, and ChiC chitinases, production of ChiB may be advantageous for the strain, allowing it to easily acquire nutrients from chitin and to survive in cold environments.

CelI, a noncellulosomal family 9 enzyme from Clostridium thermocellum, is a processive endoglucanase that degrades crystalline cellulose

The family 9 cellulase gene celI of Clostridium thermocellum, was previously cloned, expressed, and characterized (G. P. Hazlewood, K. Davidson, J. I. Laurie, N. S. Huskisson, and H. J. Gilbert, J. Gen. Microbiol. 139:307-316, 1993). We have recloned and sequenced the entire celI gene and found that the published sequence contained a 53-bp deletion that generated a frameshift mutation, resulting in a truncated and modified C-terminal segment of the protein. The enzymatic properties of the wild-type protein were characterized and found to conform to those of other family 9 glycoside hydrolases with a so-called theme B architecture, where the catalytic module is fused to a family 3c carbohydrate-binding module (CBM3c); CelI also contains a C-terminal CBM3b. The intact recombinant CelI exhibited high levels of activity on all cellulosic substrates tested, with pH and temperature optima of 5.5 and 70 degrees C, respectively, using carboxymethylcellulose as a substrate. Native CelI was capable of solubilizing filter paper, and the distribution of reducing sugar between the soluble and insoluble fractions suggests that the enzyme acts as a processive cellulase. A truncated form of the enzyme, lacking the C terminal CBM3b, failed to bind to crystalline cellulose and displayed reduced activity toward insoluble substrates. A truncated form of the enzyme, in which both the cellulose-binding CBM3b and the fused CBM3c were removed, failed to exhibit significant levels of activity on any of the substrates examined. This study underscores the general nature of this type of enzymatic theme, whereby the fused CBM3c plays a critical accessory role for the family 9 catalytic domain and changes its character to facilitate processive cleavage of recalcitrant cellulose substrates.

Characterization of the cellulolytic complex (cellulosome) of Clostridium acetobutylicum

A large cellulosomal gene cluster was identified in the recently sequenced genome of Clostridium acetobutylicum ATCC 824. Sequence analysis revealed that this cluster contains the genes for the scaffolding protein CipA, the processive endocellulase Cel48A, several endoglucanases of families 5 and 9, the mannanase Man5G, and a hydrophobic protein, OrfXp. Surprisingly, genetic organization of this large cluster is very similar to that of Clostridium cellulolyticum, the model of mesophilic clostridial cellulosomes. As C. acetobutylicum is unable to grow on cellulosic substrates, the existence of a cellulosomal gene cluster in the genome raises questions about its expression, function and evolution. Biochemical evidence for the expression of a cellulosomal protein complex was investigated. The results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis, N-terminal sequencing and Western blotting with antibodies against specific components of the C. cellulolyticum cellulosome suggest that at least four major cellulosomal proteins are present. In addition, despite the fact that no cellulolytic activities were detected, we report here the evidence for the production of a high molecular mass cellulosomal complex in C. acetobutylicum.

Cellulose-binding domains

Many researchers have acknowledged the fact that there exists an immense potential for the application of the cellulose-binding domains (CBDs) in the field of biotechnology. This becomes apparent when the phrase "cellulose-binding domain" is used as the key word for a computerized patent search; more then 150 hits are retrieved. Cellulose is an ideal matrix for large-scale affinity purification procedures. This chemically inert matrix has excellent physical properties as well as low affinity for nonspecific protein binding. It is available in a diverse range of forms and sizes, is pharmaceutically safe, and relatively inexpensive. Present studies into the application of CBDs in industry have established that they can be applied in the modification of physical and chemical properties of composite materials and the development of modified materials with improved properties. In agro-biotechnology, CBDs can be used to modify polysaccharide materials both in vivo and in vitro. The CBDs exert nonhydrolytic fiber disruption on cellulose-containing materials. The potential applications of "CBD technology" range from modulating the architecture of individual cells to the modification of an entire organism. Expressing these genes under specific promoters and using appropriate trafficking signals, can be used to alter the nutritional value and texture of agricultural crops and their final products.

Synergistic effects on crystalline cellulose degradation between cellulosomal cellulases from Clostridium cellulovorans

Clostridium cellulovorans produces a multienzyme cellulose-degrading complex called the cellulosome. In this study, we determined the synergistic effects on crystalline cellulose degradation by three different recombinant cellulosomes containing either endoglucanase EngE, endoglucanase EngH, or exoglucanase ExgS bound to mini-CbpA, a part of scaffolding protein CbpA. EngE, EngH, and ExgS are classified into the glycosyl hydrolase families 5, 9, and 48, respectively. The assembly of ExgS and EngH with mini-CbpA increased the activity against insoluble cellulose 1.5- to 3-fold, although no effects on activity against soluble cellulose were observed. These results indicated that mini-CbpA could help cellulase components degrade insoluble cellulose but not soluble cellulose. The mixture of the cellulosomes containing ExgS and EngH showed higher activity and synergy degrees than the other cellulosome mixtures, indicating the synergistic effect between EngH and ExgS was the most dominant effect among the three mixtures for crystalline cellulose degradation. Reactions were also performed by adding different cellulosomes in a sequential manner. When ExgS was used for the initial reaction followed by EngE and EngH, almost no synergistic effect was observed. On the other hand, when EngE or EngH was used for the first reaction followed by ExgS, synergistic effects were observed. These results indicated that the initial reactions by EngH and/or EngE promoted cellulose degradation by ExgS.

Microbial cellulose utilization: fundamentals and biotechnology

Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for "consolidated bioprocessing" (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.

Influence of the transposition of the thermostabilizing domain of Clostridium thermocellum xylanase (XynX) on xylan binding and thermostabilization

A xylanase gene, xynX, of Clostridium thermocellum had one thermostabilizing domain (TSD) between the signal peptide sequence and the catalytic domain (CD). The TSD of a truncated xylanase gene, xynX'(TSD-CD), was transpositioned from the N terminus to the C terminus of the CD by overlapping PCRs, and a modified product, xynX'(CD-TSD), was constructed. XynX'(TSD-CD) had a higher optimum temperature (70 degrees C versus 65 degrees C) and was more thermostable (residual activity of 68% versus 46% after a 20-min preincubation at 70 degrees C) than the one without the TSD, XynX'(CD). However, the domain-transpositioned enzyme, XynX'(CD-TSD), showed a lower optimum temperature (30 degrees C) and thermostability (20%) than XynX'(CD). Both XynX'(TSD-CD) and XynX'(CD-TSD) showed significantly higher binding capacity toward xylan than XynX'(CD), and the domain transposition did not cause any change in the binding ability. XynX'(TSD-CD) and XynX'(CD-TSD) also showed considerable binding to lichenan but not to carboxymethyl cellulose and laminarin. XynX'(TSD-CD) and XynX'(CD-TSD) had higher activities for insoluble xylan than XynX'(CD), while XynX'(CD) was more active against soluble xylan than XynX'(TSD-CD) and XynX'(CD-TSD). These results indicate that the TSD of XynX has dual functions, xylan binding and thermostabilization, and the domain should also be classified as a xylan-binding domain (XBD). The binding capacity of the XBD was not affected by domain transpositioning within the gene.

A xylanase, AtXyn1, is predominantly expressed in vascular bundles, and four putative xylanase genes were identified in the Arabidopsis thaliana genome

The cDNA clone RXF12, which encodes a xylanase (EC 3.2.1.8), was isolated from Arabidopsis thaliana. The C-terminal half of the amino acid sequence of the deduced protein, named AtXyn1, showed similarity with the catalytic domain of barley xylanase X-1. The N-terminal half of AtXyn1 also contained three regions with sequences similar to cellulose-binding domains (CBDs). A xylanase assay revealed that transgenic A. thaliana plants expressing exogenous AtXyn1 fused with enhanced green fluorescent protein (EGFP) possessed approximately twice as much xylanase activity as wild-type plants. Observation by fluorescence microscopy of transgenic A. thaliana plants expressing a fusion protein of AtXyn1 and EGFP suggested that AtXyn1 is a cell wall protein. Analysis of the localization of beta-glucuronidase (GUS) activity in transgenic A. thaliana plants containing a chimeric gene with the upstream sequence of the AtXyn1 gene and the GUS gene demonstrated that the AtXyn1 gene is predominantly expressed in vascular bundles, but not in vessel cells. These data suggest that AtXyn1 is involved in the secondary cell wall metabolism of vascular bundle cells. A database search revealed that four putative xylanase genes exist in the A. thaliana genome, besides the AtXyn1 gene. Of these, two also contain several regions with sequences similar to CBDs in their N-terminal regions. Comparison of the amino acid sequences of the five xylanases suggests a possible process for their molecular evolution.

Modification of polysaccharides and plant cell wall by endo-1,4-beta-glucanase and cellulose-binding domains

Cellulose is one of the most abundant polymers in nature. Different living systems evolved simultaneously, using structurally similar proteins to synthesize and metabolize polysaccharides. In the growing plant, cell wall loosening, together with cellulose biosynthesis, enables turgor-driven cell expansion. It has been postulated that endo-1,4-beta-glucanases (EGases) play a central role in these complex activities. Similarly, microorganisms use a consortium of lytic enzymes to convert cellulose into soluble sugars. Most, if not all, cellulases have a modular structure with two or more separate independent functional domains. Binding to cellulose is mediated by a cellulose-binding domain (CBD), whereas the catalytic domain mediates hydrolysis. Today, EGases and CBDs are known to exist in a wide range of species and it is evident that both possess immense potential in modifying polysaccharide materials in-vivo and in-vitro. The hydrolytic function is utilized for polysaccharide degradation in microbial systems and cell wall biogenesis in plants. The CBDs exerts activity that can be utilized for effective degradation of crystalline cellulose, plant cell wall relaxation, expansion and cell wall biosynthesis. Applications range from modulating the architecture of individual cells to an entire organism. These genes, when expressed under specific promoters and appropriate trafficking signals can be used to alter the nutritional value and texture of agricultural crop and their final products. EGases and CBDs may also find applications in the modification of physical and chemical properties of composite materials to create new materials possessing improved properties.

Kinetic parameters and mode of action of the cellobiohydrolases produced by Talaromyces emersonii

Three forms of cellobiohydrolase (EC 3.2.1.91), CBH IA, CBH IB and CBH II, were isolated to apparent homogeneity from culture filtrates of the aerobic fungus Talaromyces emersonii. The three enzymes are single sub-unit glycoproteins, and unlike most other fungal cellobiohydrolases are characterised by noteworthy thermostability. The kinetic properties and mode of action of each enzyme against polymeric and small soluble oligomeric substrates were investigated in detail. CBH IA, CBH IB and CBH II catalyse the hydrolysis of microcrystalline cellulose, albeit to varying extents. Hydrolysis of a soluble cellulose derivative (CMC) and barley 1,3;1,4-beta-D-glucan was not observed. Cellobiose (G2) is the main reaction product released by CBH IA, CBH IB, and CBH II from microcrystalline cellulose. All three CBHs are competitively inhibited by G2; inhibition constant values (K(i)) of 2.5 and 0.18 mM were obtained for CBH IA and CBH IB, respectively (4-nitrophenyl-beta-cellobioside as substrate), while a K(i) of 0.16 mM was determined for CBH II (2-chloro-4-nitrophenyl-beta-cellotrioside as substrate). Bond cleavage patterns were determined for each CBH on 4-methylumbelliferyl derivatives of beta-cellobioside and beta-cellotrioside (MeUmbG(n)). While the Tal. emersonii CBHs share certain properties with their counterparts from Trichoderma reesei, Humicola insolens and other fungal sources, distinct differences were noted.

Duplicated binding sites for (1-->3)-beta-D-glucan in the horseshoe crab coagulation factor G: implications for a molecular basis of the pattern recognition in innate immunity

The horseshoe crab factor G, a heterodimeric serine protease zymogen, is activated by (1-->3)-beta-D-glucan on fungal cell walls. The activation initiates the hemolymph-clotting cascade, a critical reaction for the defense against microorganisms. In the present study, we identified the domain responsible for the glucan recognition by factor G and characterized its interaction with (1-->3)-beta-d-glucan and its derivatives. Among three domains in subunit alpha of factor G, identified as the glucan-binding domain, was the COOH-terminal xylanase Z-like domain composed of two tandem-repeating units, each of which exhibits sequence similarities to the cellulose-binding domains of bacterial xylanases. Each of the single units bound to the glucan with lower affinities, and the association constant increased two orders with the tandem-repeating structure (K(a) = 8.0 x 10(8) m(-1)). In addition to longer glucans, (1-->3)-beta-D-glucan oligosaccharides incapable of activating factor G bound also to factor G and competitively inhibited the zymogen activation. The minimum structure required for the binding was a (1-->3)-beta-d-glucan disaccharide, indicating that conformation-dependent structures are not essential for the recognition. Therefore, increasing avidity by multivalent binding sites with low affinities to simple structures on biologically active polymers may be one of the principles that allows stable and specific recognition of pathogens by pattern recognition receptors in innate immunity.

C-terminal domains of Listeria monocytogenes bacteriophage murein hydrolases determine specific recognition and high-affinity binding to bacterial cell wall carbohydrates

Listeria monocytogenes phage endolysins Ply118 and Ply500 share a unique enzymatic activity and specifically hydrolyse Listeria cells at the completion of virus multiplication in order to release progeny phage. With the aim of determining the molecular basis for the lytic specificity of these enzymes, we have elucidated their domain structure and examined the function of their unrelated and unique C-terminal cell wall binding domains (CBDs). Analysis of deletion mutants showed that both domains are needed for lytic activity. Fusions of CBDs with green fluorescent protein (GFP) demonstrated that the C-terminal 140 amino acids of Ply500 and the C-terminal 182 residues of Ply118 are necessary and sufficient to direct the murein hydrolases to the bacterial cell wall. CBD500 was able to target GFP to the surface of Listeria cells belonging to serovar groups 4, 5 and 6, resulting in an even staining of the entire cell surface. In contrast, the CBD118 hybrid bound to a ligand predominantly present at septal regions and cell poles, but only on cells of serovars 1/2, 3 and 7. Non-covalent binding to surface carbohydrate ligands occurred in a rapid, saturation-dependent manner. We measured 4 x 104 and 8 x 104 binding sites for CBD118 and CBD500 respectively. Surface plasmon resonance analysis revealed unexpected high molecular affinity constants for the CBD-ligand interactions, corresponding to nanomolar affinities. In conclusion, we show that the CBDs are responsible for targeting the phage endolysins to their substrates and function to confer recognition specificity on the proteins. As the CBD sequences contain no repeats and lack all known sequence motifs for anchoring of proteins to the bacterial cell, we conclude that they use unique structural motifs for specific association with the surface of Gram-positive bacteria.

Characterization of a chitinase gene from Stenotrophomonas maltophilia strain 34S1 and its involvement in biological control

A chitinase gene was cloned on a 2.8-kb DNA fragment from Stenotrophomonas maltophilia strain 34S1 by heterologous expression in Burkholderia cepacia. Sequence analysis of this fragment identified an open reading frame encoding a deduced protein of 700 amino acids. Removal of the signal peptide sequence resulted in a predicted protein that was 68 kDa in size. Analysis of the sequence indicated that the chitinase contained a catalytic domain belonging to family 18 of glycosyl hydrolases. Three putative binding domains, a chitin binding domain, a novel polycystic kidney disease (PKD) domain, and a fibronectin type III domain, were also identified within the sequence. Pairwise comparisons of each domain to the most closely related sequences found in database searches clearly demonstrated variation in gene sources and the species from which related sequences originated. A 51-kDa protein with chitinolytic activity was purified from culture filtrates of S. maltophilia strain 34S1 by hydrophobic interaction chromatography. Although the protein was significantly smaller than the size predicted from the sequence, the N-terminal sequence verified that the first 15 amino acids were identical to the deduced sequence of the mature protein encoded by chiA. Marker exchange mutagenesis of chiA resulted in mutant strain C5, which was devoid of chitinolytic activity and lacked the 51-kDa protein in culture filtrates. Strain C5 was also reduced in the ability to suppress summer patch disease on Kentucky bluegrass, supporting a role for the enzyme in the biocontrol activity of S. maltophilia.

A newly described cellulosomal cellobiohydrolase, CelO, from Clostridium thermocellum: investigation of the exo-mode of hydrolysis, and binding capacity to crystalline cellulose

The sequence of the celO gene from Clostridium thermocellum F7 was determined. The gene product, cellulase CelO (Ct-Cel5F), had a modular structure consisting of a carbohydrate-binding module of the CBM3 family and a catalytic domain of the glycosyl hydrolase family 5. The presence of the dockerin module indicated that the enzyme was a component of the cellulosome complex. The thermostable recombinant gene product was active on cellodextrins, barley beta-glucan, carboxymethylcellulose and insoluble cellulose. Cellobiose was the only product released from amorphic and crystalline cellulose, cellotetraose and higher cello-oligosaccharides, identifying CelO as a cellobiohydrolase. The cleavage pattern of p-nitrophenyl beta-D-cellotetraoside, blockage of the hydrolysis of NaBH(4)-reduced cellopentaose and the reduction in substrate viscosity suggested activity from the reducing end in a processive mode after making random cuts. Binding to insoluble, i.e. amorphous, and crystalline cellulose was mediated by the carbohydrate-binding module CBM3b, with a preference for the crystalline substrate.

Structure of a family 15 carbohydrate-binding module in complex with xylopentaose. Evidence that xylan binds in an approximate 3-fold helical conformation

The recycling of photosynthetically fixed carbon by the action of microbial glycoside hydrolases is a key biological process. The consortium of degradative enzymes involved in this process frequently display catalytic modules appended to one or more noncatalytic carbohydrate-binding modules (CBMs). CBMs play a central role in the optimization of the catalytic activity of plant cell wall hydrolases through their binding to specific plant structural polysaccharides. Despite their pivotal role in the biodegradation of plant biomass, the mechanism by which these proteins recognize their target ligands is unclear. This report describes the structure of a xylan-binding CBM (CBM15) in complex with its ligand. This module, derived from Pseudomonas cellulosa xylanase Xyn10C, binds to both soluble xylan and xylooligosaccharides. The three-dimensional crystal structure of CBM15 bound to xylopentaose has been solved by x-ray crystallography to a resolution of 1.6 A. The protein displays a similar beta-jelly roll fold to that observed in many other families of binding-modules. A groove, 20-25 A in length, on the concave surface of one of the beta-sheets presents two tryptophan residues, the faces of which are orientated at approximately 240 degrees to one another. These form-stacking interactions with the n and n+2 sugars of xylopentaose complementing the approximate 3-fold helical structure of this ligand in the binding cleft of CBM15. In four of the five observed binding subsites, the 2' and 3' hydroxyls of the bound ligand are solvent-exposed, providing an explanation for the capacity of this xylan-binding CBM to accommodate the highly decorated xylans found in the plant cell wall.

The location of the ligand-binding site of carbohydrate-binding modules that have evolved from a common sequence is not conserved

Polysaccharide-degrading enzymes are generally modular proteins that contain non-catalytic carbohydrate-binding modules (CBMs), which potentiate the activity of the catalytic module. CBMs have been grouped into sequence-based families, and three-dimensional structural data are available for half of these families. Clostridium thermocellum xylanase 11A is a modular enzyme that contains a CBM from family 6 (CBM6), for which no structural data are available. We have determined the crystal structure of this module to a resolution of 2.1 A. The protein is a beta-sandwich that contains two potential ligand-binding clefts designated cleft A and B. The CBM interacts primarily with xylan, and NMR spectroscopy coupled with site-directed mutagenesis identified cleft A, containing Trp-92, Tyr-34, and Asn-120, as the ligand-binding site. The overall fold of CBM6 is similar to proteins in CBM families 4 and 22, although surprisingly the ligand-binding site in CBM4 and CBM22 is equivalent to cleft B in CBM6. These structural data define a superfamily of CBMs, comprising CBM4, CBM6, and CBM22, and demonstrate that, although CBMs have evolved from a relatively small number of ancestors, the structural elements involved in ligand recognition have been assembled at different locations on the ancestral scaffold.

Homologous expression and characterization of Cel61A (EG IV) of Trichoderma reesei

There are currently four proteins in family 61 of the glycoside hydrolases, from Trichoderma reesei, Agaricus bisporus, Cryptococcus neoformans and Neurospora crassa. The enzymatic activity of these proteins has not been studied thoroughly. We report here the homologous expression and purification of T. reesei Cel61A [previously named endoglucanase (EG) IV]. The enzyme was expressed in high amounts with a histidine tag on the C-terminus and purified by metal affinity chromatography. This is the first time that a histidine tag has been used as a purification aid in the T. reesei expression system. The enzyme activity was studied on a series of carbohydrate polymers. The only activity exhibited by Cel61A was an endoglucanase activity observed on substrates containing beta-1,4 glycosidic bonds, e.g. carboxymethylcellulose (CMC), hydroxyethylcellulose (HEC) and beta-glucan. The endoglucanase activity on CMC and beta-glucan was determined by viscosity analysis, by measuring the production of reducing ends and by following the degradation of the polymer on a size exclusion chromatography system. The formation of soluble sugars by Cel61A from microcrystalline cellulose (Avicel; Merck), phosphoric acid swollen cellulose (PASC), and CMC were analysed on a HPLC system. Cel61A produced small amounts of oligosaccharides from these substrates. Furthermore, Cel61A showed activity against cellotetraose and cellopentaose. The activity of Cel61A was several orders of magnitude lower compared to Cel7B (previously EG I) of T. reesei on all substrates. One significant difference between Cel61A and Cel7B was that cellotriose was a poor substrate for Cel61A but was readily hydrolysed by Cel7B. The enzyme activity for Cel61A was further studied on a large number of carbohydrate substrates but the enzyme showed no activity towards any of these substrates.

Mapping of genes encoding glycoside hydrolases on the chromosome of Cellulomonas fimi

Cellulomonas fimi genomic DNA was digested with HpaI, MunI, HindIII, and NsiI, producing fragments ranging in size from 20 to 1400 kbp that were resolved by pulsed field gel electrophoresis. Genetic and physical linkages were determined by Southern blotting and were used to construct a genome map. Cellulomonas fimi has a single circular chromosome of approx. 4000 kbp. Except for two closely linked genes, cbh6A and cel5A, the genes known to encode glycoside hydrolases are scattered widely on the chromosome.Key words: Cellulomonas fimi, genome map, pulsed field gel electrophoresis, glycoside hydrolases.