Nitrogen-Doped Titanium Dioxide as Visible-Light-Sensitive Photocatalyst: Designs, Developments, and Prospects

Atomic-Scale Mapping of Impurities in Partially Reduced Hollow TiO2 Nanowires

The incorporation of impurities during the chemical synthesis of nanomaterials is usually uncontrolled and rarely reported because of the formidable challenge in measuring trace amounts of often light elements with sub-nanometer spatial resolution. And yet, these foreign elements (introduced by doping, for example) influence functional properties. We demonstrate how the hydrothermal growth and a partial reduction reaction on hollow TiO2 nanowires leads to the introduction of parts per millions of boron, sodium, and nitrogen. This doping explains the presence of oxygen vacancies and reduced Ti states at the surface, which enhance the functional properties of TiO2 . Our results were obtained on model metal oxide nanomaterials and they shed light on a general process that leads to the uncontrolled incorporation of trace impurities in TiO2 , thereby, having a strong effect on applications in energy-harvesting.

Hybrid TiO2-Polyaniline Photocatalysts and their Application in Building Gypsum Plasters

Hybrid materials of conjugated polymer and titanium(IV) oxide have attracted considerable attention concerning their potential benefits, including (i) efficient exploitation of visible light, (ii) a high adsorption capacity for organic contaminants, (iii) and effective charge carriers separation. The new class of the photocatalysts is promising for the removal of environmental pollutants in both aqueous and gaseous phases. For the first time, in this study, the polyaniline (PANI)-TiO2 hybrid composite was used for the degradation of phenol in water and toluene in the gas phase. Polyaniline-TiO2 was prepared by the in situ polymerization of aniline on the TiO2 surface. The obtained hybrid material was characterized by diffuse reflectance spectroscopy (DR/UV-Vis), X-ray diffraction (XRD), fast-Fourier transformation spectroscopy (FTIR), photoluminescence (PL) spectroscopy, microscopy analysis (SEM/TEM), and thermogravimetric analysis (TGA). An insight into the mechanism was shown based on the photodegradation analysis of charge carrier scavengers. Polyaniline is an efficient TiO2 photosensitizer for photodegradation in visible light (λ > 420 nm). The trapping experiments revealed that mainly h+ and ˙OH were the reactive oxygen species that were responsible for phenol degradation. Furthermore, the PANI-TiO2 hybrid nanocomposite was used in gypsum plaster to study the self-cleaning properties of the obtained building material. The effect of PANI-TiO2 content on the hydrophilic/hydrophobic properties and crystallographic structure of gypsum was studied. The obtained PANI-TiO2-modified gypsum plaster had improved photocatalytic activity in the reaction of toluene degradation under Vis light.

Manganese and Graphene Included Titanium Dioxide Composite Nanowires: Fabrication, Characterization and Enhanced Photocatalytic Activities

We report the detailed microstructural, morphological, optical and photocatalytic studies of graphene (G) and manganese (Mn) co-doped titanium dioxide nanowires (TiO₂(G–Mn) NWs) prepared through facile combined electrospinning–hydrothermal processes. The as-prepared samples were thoroughly characterized using X-ray diffraction (XRD), transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and diffuse reflectance spectroscopy (DRS). XRD studies reveal the formation of mixed anatase-rutile phases or rutile phase depending on the dopant (Mn) precursor concentrations in the electrospinning dope and calcination temperature. The evaluation of lattice parameters revealed that the incorporation of Mn species and carbon atoms in to the lattice of anatase or rutile TiO₂ could occur through substituting the sites of oxygen atoms. XPS results confirm the existence of Mn²⁺/Mn³⁺ within the TiO₂ NW. Raman spectroscopy provides the evidence for structural modification because of the graphene inclusion in TiO₂ NW. The optical band gap of G–Mn including TiO₂ is much lower than pristine TiO₂ as confirmed through UV-vis DRS. The photocatalytic activities were evaluated by nitric oxide (NOx) degradation tests under visible light irradiation. Superior catalytic activity was witnessed for rutile G–Mn-co-doped TiO₂ NW over their anatase counterparts. The enhanced photocatalytic property was discussed based on the synergistic effects of doped G and Mn atoms and explained by plausible mechanisms.

Recent developments and challenges in practical application of visible-light-driven TiO2-based heterojunctions for PPCP degradation: A critical review

The ability of the TiO₂-based photocatalysis process to mineralize organic pollutants has attracted attention worldwide for the degradation of recalcitrant pharmaceuticals and personal care products (PPCPs). Nevertheless, (1) the limited exploitation of the solar spectrum, i.e., activation under UV light (only 2-3% of solar spectrum), and (2) the high recombination rate of photo-generated charge carriers, i.e., electrons and holes, have limited its application which can, however, be improved by developing a TiO₂-based heterojunction. The objective of this critical review paper is to discuss the recent developments (2009-2019) in visible-light-driven (VLD) TiO₂-based heterojunctions for PPCP degradation and their degradation mechanisms. Compared to the conventional heterojunctions, Schottky and Z-scheme heterojunctions, which are non-conventional heterojunctions, are found to be more effective for PPCP degradation due to their more efficient separation of charge carriers and the occurrence of redox reactions at a relatively higher redox potential. Furthermore, the enhancement strategies for the development of a VLD TiO₂-based heterojunction are also explored which can be achieved by selecting the (1) highly photocatalytically active {001} facet of anatase TiO₂, (2) synthesis methods governing the structural changes at the junction interface, and (3) heterojunction components which can efficiently generate the powerful •OH radicals. The challenges in practical applications are also discussed which include factors, viz., cost reduction, recycling, stability, byproducts analysis, evaluation of the environmental effectiveness, and reactor design and scale-up of the VLD TiO₂-based heterojunctions. Accordingly, the prospects of VLD TiO₂-based heterojunctions for PPCP degradation in real environmental applications are discussed.

Single-Metal Atoms Supported on MBenes for Robust Electrochemical Hydrogen Evolution

Two-dimensional (2D) photo- and electrocatalysts play a key role in hydrogen production through water splitting, and much efforts have been undertaken to seek a low-cost and efficient alternative candidate to noble-metal Pt. Herein, the method of introducing several different transition-metal atoms to tune the catalytic properties of 2D MBene is proposed. Density functional theory calculations reveal that the H-O bonding strength can be weakened by charge transfer between the oxygen atom and the introduced single-metal atom. The weakening of the bond greatly improves the MBene catalytic activity of hydrogen evolution reaction. Interestingly, the Gibbs free energy (|ΔG_H|) of W₂B₂O₂ decreases from |-0.67| to 0.013 eV by embedding a V adatom. This work should initiate 2D material MBene applications in green catalysis and energy sectors.

The Use of Tunable Optical Absorption Plasmonic Au and Ag Decorated TiO2 Structures as Efficient Visible Light Photocatalysts

Exploring solar-excited heterogeneous photocatalysts by taking advantage of surface plasmon resonance (SPR) has drawn growing research attention. As it could help to pave the way for global sustainable development. The decoration of TiO2 particles with noble metals possessing SPR effects is regarded as one of the most effective solutions. The perfect match of the SPR absorption band with the spectrum of incident light is an essential factor for plasmonic enhancement. However, modifying with sole noble metal is often limited as it tunes wavelength of only several nanometers. To overcome this drawback, an alternative approach can be offered by decoration with more than one noble metal. For instance, Au-Ag co-decoration displays greatly adjustable, composition-dependent SPR agent over a broad range of the visible light spectrum (ca. from 415 to 525 nm). Hence Au-Ag complex is a remarkable candidate for tuning the photo adsorption of TiO2 from UV to visible light. This study presents a novel and tailored method for the fabrication of Au-Ag co-modified TiO2 particles, and how Au-Ag dependent SPR was applied as the visible light-responsive TiO2 based photocatalysts in a simple but reliable way. The fabricated Au-Ag co-decorated TiO2 (AuxAg(1−x)/TiO2) was characterized and proved to own excellent stability and large specific surface area. The optimization of these particles against the wavelength of maximal solar light intensity was confirmed by photo degradation of methylene blue under visible light radiation. This work may provide further insight into the design of TiO2-based composites with improved photocatalytic properties for environmental remediation and renewable energy utilization.

NiSe2/CdS composite nanoflakes photocatalyst with enhanced activity under visible light

Degrading organic pollutants using a photocatalyst under visible light is one of the effective ways to solve the increasingly serious environmental pollution problem. In this work, we have loaded a small amount of NiSe₂ nanoflakes on the surface of CdS using a simple and low-cost solvothermal synthesis method. The samples were characterized with detailed X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS), photocurrent, photoluminescence spectrometer (PL), photocatalytic properties, etc. The results show that a 2 mol% load of NiSe₂ increases the rate of degradation of Rhodamine B (RhB) to more than twice the original rate (0.01000 min⁻¹versus 0.00478 min⁻¹). Meanwhile, the sample has excellent stability. The improved photocatalytic properties can be attributed to the face-to-face contact between the nanoflakes, accelerated separation and transfer of photon-generated carriers. This work provides a suitable co-catalyst that can be used to optimize the performance of other photocatalytic materials.

The obtained NiSe₂/CdS composite nanoflakes exhibit greatly enhanced photocatalytic properties due to the accelerated separation of photon-generated carriers.

Mg0.8Zn0.2O microspheres: preparation, characterization and application for degrading organic dyes

Photocatalytic degradation of organic pollutants in wastewater is one of the most promising strategies for environmental remediation, and photocatalysts as the prerequisite have received considerable attention.

1,3,5-Triazine and dibenzo[b,d]thiophene sulfone based conjugated porous polymers for highly efficient photocatalytic hydrogen evolution

Conjugated porous polymers based on 1,3,5-triazine and dibenzo[b,d]thiophene sulfone (DBTSO) units show excellent solar water splitting ability. A high hydrogen evolution rate of 16 287 μmol g⁻¹ h⁻¹ is achieved.

Photothermal catalytic properties of layered titanium chalcogenide nanomaterials

Titanium chalcogenides are valuable candidates for visible light photocatalysis at high efficiency levels. TiS₂/TiO₂ core shell heterostructures are able to increase this efficiency by an effective quenching of the exiton recombination.

N-Promoted Ru1/TiO2 single-atom catalysts for photocatalytic water splitting for hydrogen production: a density functional theory study

In our Ru₁–N₁/TiO₂ single-atom catalyst system, isolated Ru₁ atoms act as active sites for the reduction of protons, and the TiO₂ support offers the photogenerated carriers, allowing for a hydrogen evolution activity comparable to that of Pd.

Facile synthesis of oxygen-deficient nano-TiO2 coordinated by acetate ligands for enhanced visible-light photocatalytic performance

Surface oxygen vacancy defects and acetate ligands can synergistically enhance the visible-light photocatalytic activity of nano-TiO₂ for phenol degradation.

Nitrogen modified titanium dioxide (N-TiO2) promotes carbon monoxide oxidation over copper catalysts

Nitrogen modified titanium dioxide (N-TiO₂) improves the copper dispersion. Thereby, Cu–N-TiO₂ prevails over Cu–TiO₂ in CO oxidation.

3D Bombax-structured carbon nanotube sponge coupling with Ag3PO4 for tetracycline degradation under ultrasound and visible light irradiation

A novel photocatalytic carbon nanotube sponge with three-dimensional Bombax-structure was fabricated by a facile chemical vapor deposition followed by in situ ion-exchange approach. The as-prepared sponge achieved both high-efficiency adsorption and photocatalysis towards antibiotics, which can remove up to 90% of tetracycline within an hour. The morphology and mechanism of the photocatalytic CNT sponge were explored by multiple measures. Results show the functional groups and high specific surface area of CNT sponge play vital roles in preparing this Bombax-structured Ag₃PO₄/CNT sponge, the band gap of which can be tuned by varying the ration between Ag₃PO₄ and CNT. The photodegradation experiments of tetracycline with the assistance of ultrasound irradiation were performed, Ag₃PO₄/CNT sponge exhibits preferable photocatalytic activity, which can be attributed to both the enhancement of specific surface area of Ag₃PO₄ and the cavitation effect on CNT surface. The efficiency contributed by ultrasound could account for more than half of the degradation efficiency when the ultrasound power was 100 W. The improvement in transfer efficiency and the delay in charge recombination of Ag₃PO₄/CNT sponge were further verified by Electrochemical impedance spectra (EIS) and Photoluminescence tests (PL). Reactive free-radical species were detected by the Electron Spin Resonance (ESR). The intermediates and possible pathway were analyzed by gas chromatography-mass spectrometer (GC-MS) technique.

Electron magnetic resonance in heterogeneous photocatalysis research

The contribution of electron magnetic resonance techniques, and in particular of CW-EPR, to the experimental research on photocatalytic phenomena is illustrated in this paper with selected examples. In the first part of the paper the role of EPR in unravelling the nature and the features of extrinsic point defects in semiconducting oxides is epitomized using the important example of the photoactive nitrogen center in various semiconducting oxides. In the second part we describe how EPR can monitor the processes that follow the initial photoinduced charge separation in photocatalysis, namely the stabilisation, migration and surface reactivity of electrons and holes. Finally, we will discuss how the role of EPR in photocatalysis is not limited to monitor phenomena occurring in the solid or at its surface but it can be extended to the investigation of the liquid phase by employing the spin trapping techniques to monitor the nature and the concentration of the reactive free radicals formed along the photocatalytic process.

Modification of TiO2 Nanoparticles with Organodiboron Molecules Inducing Stable Surface Ti3+ Complex

As one of the most promising semiconductor oxide materials, titanium dioxide (TiO₂) absorbs UV light but not visible light. To address this limitation, the introduction of Ti³⁺ defects represents a common strategy to render TiO₂ visible-light responsive. Unfortunately, current hurdles in Ti³⁺ generation technologies impeded the widespread application of Ti³⁺ modified materials. Herein, we demonstrate a simple and mechanistically distinct approach to generating abundant surface-Ti³⁺ sites without leaving behind oxygen vacancy and sacrificing one-off electron donors. In particular, upon adsorption of organodiboron reagents onto TiO₂ nanoparticles, spontaneous electron injection from the diboron-bound O²⁻ site to adjacent Ti⁴⁺ site leads to an extremely stable blue surface Ti³⁺‒O^−· complex. Notably, this defect generation protocol is also applicable to other semiconductor oxides including ZnO, SnO₂, Nb₂O₅, and In₂O₃. Furthermore, the as-prepared photoelectronic device using this strategy affords 10³-fold higher visible light response and the fabricated perovskite solar cell shows an enhanced performance.

•

Organodiborons are used to reshape the surface electronic state of semiconductor oxides

•

Diboron adsorption leads to spontaneous charge transfer and reduced surface metal ions

•

Photodetector based on diboron material affords 10³ fold higher visible light response

Photocatalytic water splitting by N-TiO2 on MgO (111) with exceptional quantum efficiencies at elevated temperatures

Photocatalytic water splitting is attracting enormous interest for the storage of solar energy but no practical method has yet been identified. In the past decades, various systems have been developed but most of them suffer from low activities, a narrow range of absorption and poor quantum efficiencies (Q.E.) due to fast recombination of charge carriers. Here we report a dramatic suppression of electron-hole pair recombination on the surface of N-doped TiO₂ based nanocatalysts under enhanced concentrations of H⁺ and OH^-, and local electric field polarization of a MgO (111) support during photolysis of water at elevated temperatures. Thus, a broad optical absorption is seen, producing O₂ and H₂ in a 1:2 molar ratio with a H₂ evolution rate of over 11,000 μmol g^-1 h^-1 without any sacrificial reagents at 270 °C. An exceptional range of Q.E. from 81.8% at 437 nm to 3.2% at 1000 nm is also reported.

Photoluminescence and structural properties of the nitrogen doped TiO2 and the influence of SiO2 and Ag nanoparticles

Mixtures of nitrogen-doped titanium dioxide (TiO₂:N) with different concentrations of Ag and/or SiO₂ particles (0.5, 1 and 2 wt.%) were prepared in solid state by mechanico-chemical interactions. Using UV-VIS spectroscopy, Raman scattering, photoluminescence (PL) and photoluminescence excitation (PLE), the influence of the particles on the host material is evaluated. UV-VIS spectroscopy studies indicate a TiO₂:N band gap shift to the UV range with increasing concentrations of SiO₂ and Ag particles. PL intensities decrease with increasing concentrations of Ag and/or SiO₂ particles in the TiO₂:N host matrix, which in turn could effectively restrict the electron and hole recombination. To explain these processes, the different de-excitation ways will be advanced, taking into account the energy levels diagram of TiO₂:N/Ag, TiO₂:N/SiO₂ and TiO₂:N/Ag/SiO₂ systems. PLE spectra show a gradual decrease in their relative intensities after 165 min of continuous irradiation due to photosensitivity of TiO₂:N. The plasmonic effect of Ag particles in the TiO₂:N/Ag system is highlighted for the first time by PLE studies.

N-Doped Yellow TiO2 Hollow Sphere-Mediated Visible-Light-Driven Efficient Esterification of Alcohol and N-Hydroxyimides to Active Esters

Herein we report a simple synthetic protocol for N-doped yellow TiO₂ (N-TiO₂ ) hollow spheres as an efficient visible-light-active photocatalyst using aqueous titanium peroxocarbonate complex (TPCC) solution as precursor and NH₄ OH. In the developed strategy, the ammonium ion of TPCC and NH₄ OH acts as nitrogen source and structure-directing agent. The synthesized N-TiO₂ hollow spheres are capable of promoting the synthesis of active esters of N-hydroxyimide and alcohol through simultaneous selective oxidation of alcohol to aldehyde followed by cross-dehydrogenative coupling (CDC) under ambient conditions upon irradiation of visible light. It is possible to develop a novel and cost-effective one-pot strategy for the synthesis of important esters and amides on gram scale using the developed strategy. The catalytic activity of N-TiO₂ hollow spheres is much superior to that of other reported N-TiO₂ samples as well as TiO₂ with varying morphology.

Electrochemical Performance of Nitrogen-Doped TiO2 Nanotubes as Electrode Material for Supercapacitor and Li-Ion Battery

Electrochemical anodized titanium dioxide (TiO2) nanotubes are of immense significance as electrochemical energy storage devices owing to their fast electron transfer by reducing the diffusion path and paving way to fabricating binder-free and carbon-free electrodes. Besides these advantages, when nitrogen is doped into its lattice, doubles its electrochemical activity due to enhanced charge transfer induced by oxygen vacancy. Herein, we synthesized nitrogen-doped TiO2 (N-TiO2) and studied its electrochemical performances in supercapacitor and as anode for a lithium-ion battery (LIB). Nitrogen doping into TiO2 was confirmed by Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) techniques. The electrochemical performance of N-TiO2 nanotubes was outstanding with a specific capacitance of 835 µF cm-2 at 100 mV s-1 scan rate as a supercapacitor electrode, and it delivered an areal discharge capacity of 975 µA h cm-2 as an anode material for LIB which is far superior to bare TiO2 nanotubes (505 µF cm-2 and 86 µA h cm-2, respectively). This tailor-made nitrogen-doped nanostructured electrode offers great promise as next-generation energy storage electrode material.

Particulate Photocatalysts for Light-Driven Water Splitting: Mechanisms, Challenges, and Design Strategies

Solar-driven water splitting provides a leading approach to store the abundant yet intermittent solar energy and produce hydrogen as a clean and sustainable energy carrier. A straightforward route to light-driven water splitting is to apply self-supported particulate photocatalysts, which is expected to allow solar hydrogen to be competitive with fossil-fuel-derived hydrogen on a levelized cost basis. More importantly, the powder-based systems can lend themselves to making functional panels on a large scale while retaining the intrinsic activity of the photocatalyst. However, all attempts to generate hydrogen via powder-based solar water-splitting systems to date have unfortunately fallen short of the efficiency values required for practical applications. Photocatalysis on photocatalyst particles involves three sequential steps: (i) absorption of photons with higher energies than the bandgap of the photocatalysts, leading to the excitation of electron-hole pairs in the particles, (ii) charge separation and migration of these photoexcited carriers, and (iii) surface chemical reactions based on these carriers. In this review, we focus on the challenges of each step and summarize material design strategies to overcome the obstacles and limitations. This review illustrates that it is possible to employ the fundamental principles underlying photosynthesis and the tools of chemical and materials science to design and prepare photocatalysts for overall water splitting.

TiO2 and Au-TiO2 Nanomaterials for Rapid Photocatalytic Degradation of Antibiotic Residues in Aquaculture Wastewater

Antibiotic residues in aquaculture wastewater are considered as an emerging environmental problem, as they are not efficiently removed in wastewater treatment plants. To address this issue, we fabricated TiO₂ nanotube arrays (TNAs), TiO₂ nanowires on nanotube arrays (TNWs/TNAs), Au nanoparticle (NP)-decorated-TNAs, and TNWs/TNAs, which were applied for assessing the photocatalytic degradation of eight antibiotics, simultaneously. The TNAs and TNWs/TNAs were synthesized by anodization using an aqueous NH₄F/ethylene glycol solution. Au NPs were synthesized by chemical reduction method, and used to decorate on TNAs and TNWs/TNAs. All the TiO₂ nanostructures exhibited anatase phase and well-defined morphology. The photocatalytic performance of TNAs, TNWs/TNAs, Au-TNAs and Au-TNWs/TNAs was studied by monitoring the degradation of amoxicillin, ampicillin, doxycycline, oxytetracycline, lincomycin, vancomycin, sulfamethazine, and sulfamethoxazole under ultraviolet (UV)-visible (VIS), or VIS illumination by LC-MS/MS method. All the four kinds of nanomaterials degraded the antibiotics effectively and rapidly, in which most antibiotics were removed completely after 20 min treatment. The Au-TNWs/TNAs exhibited the highest photocatalytic activity in degradation of the eight antibiotics. For example, reaction rate constants of Au-TNWs/TNAs for degradation of lincomycin reached 0.26 min⁻¹ and 0.096 min⁻¹ under UV-VIS and VIS irradiation, respectively; and they were even higher for the other antibiotics. The excellent photocatalytic activity of Au-TNWs/TNAs was attributed to the synergistic effects of: (1) The larger surface area of TNWs/TNAs as compared to TNAs, and (2) surface plasmonic effect in Au NPs to enhance the visible light harvesting.

Photoelectrochemical determination of ractopamine based on inner filter effect between gold nanoparticles and graphitic carbon nitride-copper(II) polyphthalocyanine coupled with 3D DNA stabilizer

Copper(II) polyphthalocyanine (CuPPc) was combined with graphitic carbon nitride (g-C₃N₄) to form a heterojunction with enhanced photoelectrochemical (PEC) signal. A sensitive PEC method was developed for determination of ractopamine based on a PEC inner filter effect between gold nanoparticles (AuNPs) and the g-C₃N₄/CuPPc. A gold electrode was modified with g-C₃N₄/CuPPc and the DNA was linked to the AuNPs. Initially, the PEC signal is weak due to the inner filter effect between the AuNPs and g-C₃N₄/CuPPc. In the presence of ractopamine, it interacts with the aptamer and the complementary chain (C chain) is released. This triggers the entropy-driven cyclic amplification and results in the release of the substrate B chain (SB chain) from three-dimensional DNA stabilizer. The probe is released from the electrode due to the interaction of probe DNA and the SB chain. As a result, the PEC signal increases linearly in the 0.1 pmol·L^-1 to 1000 pmol·L^-1 ractopamine concentration range. The detection limit is 0.03 pM, and the relative standard deviation is 3.4% (at a 10 pmol·L^-1 level; for n = 11). The method has been successfully applied to the determination of ractopamine in pork samples. Graphical abstract Schematic presentation of detection method based on PEC inner filter effect between AuNPs and the g-C₃N₄/CuPPc being fabricated for ractopamine. 3D DNA was used as stabilizer to decrease the PEC blank signal.

Uptake and toxicity studies of magnetic TiO2-Based nanophotocatalyst in Arabidopsis thaliana

Information on the environmental impact of magnetic TiO₂-based nanophotocatalysts is scarce. This study evaluated the potential effects of an innovative magnetic nanophotocatalyst N-TiO₂/Fe₃O₄@SiO₂ (NTFS) on plants using Arabidopsis thaliana grown in a hydroponic system. NTFS was detected in the vascular tissues and mesophyll of plants, thus confirming the uptake and upwards transport of NTFS from roots to leaves. Fourier transform infrared spectroscopy was applied to determine compositional and structural alterations in plant tissues exposed to NTFS, or its two main components (N-TiO₂ and Fe₃O₄@SiO₂), at concentrations ranging from 0 to 1000 mg/L, but no changes were detected in the lipids, pectins, proteins, cellulose, hemicellulose, and carbohydrates. The morphology and biomass of the plants were not affected by the NTFS or its components either. Biosensors for inorganic phosphate (Pi) and MgATP^2- were used to monitor the in vivo Pi and MgATP^2- levels in the plant cells. The results showed that NTFS and its components did not induce any adverse effects on the cytosolic Pi level or ATP synthesis, indicating the energy physiology of Arabidopsis was unaffected. In general, NTFS has inconsequential toxic effects on Arabidopsis, but can be taken up by plants, enter the food chain, and cause potential exposure and bioaccumulation in animals and human beings.

Modulation of Bi2 MoO6 -Based Materials for Photocatalytic Water Splitting and Environmental Application: a Critical Review

Highly active photocatalysts driving chemical reactions are of paramount importance toward renewable energy substitutes and environmental protection. As a fascinating Aurivillius phase material, Bi₂ MoO₆ has been the hotspot in photocatalytic applications due to its visible light absorption, nontoxicity, low cost, and high chemical durability. However, pure Bi₂ MoO₆ suffers from low efficiency in separating photogenerated carriers, small surface area, and poor quantum yield, resulting in low photocatalytic activity. Various strategies, such as morphology control, doping/defect-introduction, metal deposition, semiconductor combination, and surface modification with conjugative π structures, have been systematically explored to improve the photocatalytic activity of Bi₂ MoO₆ . To accelerate further developments of Bi₂ MoO₆ in the field of photocatalysis, this comprehensive Review endeavors to summarize recent research progress for the construction of highly efficient Bi₂ MoO₆ -based photocatalysts. Furthermore, benefiting from the enhanced photocatalytic activity of Bi₂ MoO₆ -based materials, various photocatalytic applications including water splitting, pollutant removal, and disinfection of bacteria, were introduced and critically reviewed. Finally, the current challenges and prospects of Bi₂ MoO₆ are pointed out. This comprehensive Review is expected to consolidate the existing fundamental theories of photocatalysis and pave a novel avenue to rationally design highly efficient Bi₂ MoO₆ -based photocatalysts for environmental pollution control and green energy development.

Electrospinning Fabricating Au/TiO2 Network-like Nanofibers as Visible Light Activated Photocatalyst

Exploiting photocatalysts with characteristics of low cost, high reactivity and easy recovery offer great potentials for complete elimination of toxic chemicals and environmental remediation. In this work, Au/TiO2 network-like nanofibers were fabricated using a facile electrospinning technique followed by calcinations in air. Photocatalytic tests indicate that the Au/TiO2 network-like nanofibers possess an excellent photodegradation rate of rhodamine B (RB) under UV, visible and natural light radiation. The enhanced photocatalytic activity can be attributed to the plasmonic resonance absorption of Au nanoparticles, and photogenerated electrons and holes are effectively separated by the Au/TiO2 heterojunction structures. Furthermore, the three-dimensional network structure can provide a large number of active sites for RB degradation.