Small-diameter vascular tissue engineering

Fabrication of heterogeneous porous bilayered nanofibrous vascular grafts by two-step phase separation technique

Innterconnected porous architecture is critical for tissue engineering scaffold as well as biomimetic nanofibrous structure. In addition, a paradigm shift is recently taking place in the scaffold design from homogeneous porous scaffold to heterogeneous porous scaffold for the complex tissues. In this study, a versatile and simple one-pot method, dual phase separation, is developed to fabricate macroporous nanofibrous scaffold by phase separating the mixture solutions of immiscible polymer blends without using porogens. The macropores in the scaffold are interconnected, and their size can be tuned by the polymer blend ratio. Moreover, benefiting from the easy operation of dual phase separation technique, an innovative, versatile and facile two-step phase separation method is developed to fabricate heterogeneous porous layered nanofibrous scaffolds with different shapes, such as bilayered tubular scaffold and tri-layered cylindrical scaffold. The bilayered tubular nanofibrous scaffold composed of poly(l-lactic acid) (PLLA)/poly(l-lactide-co-ε-caprolactone) (PLCL) microporous inner layer and PLLA/poly(ε-caprolactone) (PCL) macroporous outer layer matches simultaneously the functional growth of endothelial cells (ECs) and smooth muscle cells (SMCs), and shows the favorable performance for potential small diameter blood vessel application. Therefore, this study provides the novel and facile strategies to fabricate macroporous nanofibrous scaffold and heterogeneous porous layered nanofibrous scaffold for tissue engineering applications.

STATEMENT OF SIGNIFICANCE

The fabrication of porous tissue engineering scaffold made of non-water-soluble polymer commonly requires the use of porogen materials. This is complex and time-consuming, resulting in greater difficulty to prepare heterogeneous porous layered scaffold for multifunctional tissues repair, such as blood vessel and osteochondral tissue. Herein, a novel, versatile and simple one-pot dual phase separation technique is developed for the first time to fabricate porous scaffold without using porogens. Simultaneously, it also endows the resultant scaffold with the biomimetic nanofibrous architecture. Based on the easy operation of this dual phase separation technique, a facile two-step phase separation method is also put forward for the first time and applied in fabricating heterogeneous porous layered nanofibrous scaffold for tissue engineering applications.

Toward endothelialization via vascular endothelial growth factor immobilization on cell-repelling functional polyurethanes

We screened a family of nonspecific cell-repelling polyurethanes (PUs) whose backbones are attached with epoxy group-terminated polyethylene glycol (PEG) side chains. Water incubation of the PU films (with 9.2-31.1 wt % PEG) caused a surface enrichment of PEG chains where vascular endothelial growth factor (VEGF) was grafted by forming secondary amine linkages between VEGF molecules and the PEG spacer. These linkages are still ionizable similar to original primary amines in VEGF, thereby retaining the original charge distribution on VEGF macromolecules. This charge conservation together with PEG steric repulsion helped to preserve VEGF conformation and bioactivity. The PU substrates with suitable hard segments contents and VEGF surface densities can selectively induce endothelial cells (ECs) adhesion and proliferation toward endothelialization. Moreover, the PU substrates, even grafted with fibrinogen (Fg), cannot trigger platelet adhesion and deformation, suggesting an inactive conformation of the grafted Fg. Thus enough antithrombogenicity of the PU substrates could be expected before full endothelialization. These PU materials might be applied onto the lumens of vascular grafts, potentially stimulating luminal endothelialization in vivo. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 965-977, 2019.

Design, Preparation, and Performance of a Novel Bilayer Tissue-Engineered Small-Diameter Vascular Graft

In clinical practice, the need for small-diameter vascular grafts continues to increase. Decellularized xenografts are commonly used for vascular reconstructive procedures. Here, porcine coronary arteries are decellularized, which destroys the extracellular matrix structure, leading to the decrease of vascular strength and the increase of vascular permeability. A bilayer tissue-engineered vascular graft (BTEV) is fabricated by electrospinning poly(l-lactide-co-carprolactone)/gelatin outside of the decellularized vessels and functionalized by immobilizing heparin, which increases the biomechanical strength and anticoagulant activity of decellularized vessels. The biosafety and efficacy of the heparin-modified BTEVs (HBTEVs) are verified by implanting in rat models. HBTEVs remain patent and display no expansion or aneurism. After 4 weeks of implantation, a cell monolayer in the internal surface and a dense middle layer have formed, and the mechanical properties of regenerated vessels are similar to those of rat abdominal aorta. Therefore, HBTEVs can be used for rapid remodeling of small-diameter blood vessels.

Heparinized PCL/keratin mats for vascular tissue engineering scaffold with potential of catalytic nitric oxide generation

Heparins are capable of improving blood compatibility, enhancing HUVEC viability, while inhibiting HUASMC proliferation. Combination of biodegradable poly(ε-caprolactone) (PCL) with keratin and heparins would provide an anticoagulant and endothelialization supporting environment for vascular tissue engineering. Herein, PCL and keratin were first coelectrospun and then covalently conjugated with heparins. The resulting mats were surface-characterized by ATR-FTIR, SEM, WCA, and XPS. Cell viability data showed that the heparinized PCL/keratin mats could motivate the adhesion and growth of HUVEC, while inhibit HUASMC proliferation. In addition, these mats could prolong blood clotting time and reduce platelet adhesion as well as no erythrolysis. Interestingly, these mats could catalyze the NO donor in blood to release NO, which could enhance endothelial cell growth, while decrease smooth muscle cell proliferation and platelet adhesion. In summary, the heparinized mats would be a good candidate as a scaffold for vascular tissue engineering. This study is novel in that we prepared a type of heparinized tissue scaffold that could catalyze the NO donor to release NO to regulate endothelialization without angiogenesis and thrombus formation.

Magnetic targeting of smooth muscle cells in vitro using a magnetic bacterial cellulose to improve cell retention in tissue-engineering vascular grafts

Tissue-engineered vascular grafts (TEVG) use biologically-active cells with or without supporting scaffolds to achieve tissue remodeling and regrowth of injured blood vessels. However, this process may take several weeks because the high hemodynamic shear stress at the damaged site causes cellular denudation and impairs tissue regrowth. We hypothesize that a material with magnetic properties can provide the force required to speed up re-endothelization at the vascular defect by facilitating high cell density coverage, especially during the first 24 h after implantation. To test our hypothesis, we designed a magnetic bacterial cellulose (MBC) to locally target cells in vitro under a pulsatile fluid flow (0.514 dynes cm^-2). This strategy can potentially increase cell homing at TEVG, without the need of blood cessation. The MBC was synthesized by an in situ precipitation method of Fe³⁺ and Fe²⁺ iron salts into bacterial cellulose (BC) pellicles to form Fe₃O₄ nanoparticles along the BC's fibrils, followed by the application of dextran coating to protect the embedded nanoparticles from oxidation. The iron salt concentration used in the synthesis of the MBC was tuned to balance the magnetic properties and cytocompatibility of the magnetic hydrogel. Our results showed a satisfactory MBC magnetization of up to 10 emu/g, which is above the value considered relevant for tissue engineering applications (0.05 emu/g). The MBC captured magnetically-functionalized cells under dynamic flow conditions in vitro. MBC magnetic properties and cytocompatibility indicated a dependence on the initial iron oxide nanoparticle concentration.

STATEMENT OF SIGNIFICANCE

Magnetic hydrogels represent a new class of functional materials with great potential in TVEG because they offer a platform to (1) release drugs on demand, (2) speed up tissue regrowth, and (3) provide mechanical cues to cells by its deformability capabilities. Here, we showed that a magnetic hydrogel, the MBC, was able to capture and retain magnetically-functionalized smooth muscle cells under pulsatile flow conditions in vitro. A magnetic hydrogel with this feature can be used to obtain high-density cell coverage on sites that are aggressive for cell survival such as the luminal face of vascular grafts, whereas simultaneously can support the formation of a biologically-active cell layer that protects the material from restenosis and inflammation.

Construction of a small-caliber tissue-engineered blood vessel using icariin-loaded β-cyclodextrin sulfate for in situ anticoagulation and endothelialization

The rapid endothelialization of tissue-engineered blood vessels (TEBVs) can effectively prevent thrombosis and inhibit intimal hyperplasia. The traditional Chinese medicine ingredient icariin is highly promising for the treatment of cardiovascular diseases. β-cyclodextrin sulfate is a type of hollow molecule that has good biocompatibility and anticoagulation properties and exhibits a sustained release of icariin. We studied whether icariin-loaded β-cyclodextrin sulfate can promote the endothelialization of TEBVs. The experimental results showed that icariin could significantly promote the proliferation and migration of endothelial progenitor cells; at the same time, icariin could promote the migration of rat vascular endothelial cells (RAVECs). Subsequently, we used an electrostatic force to modify the surface of the TEBVs with icariin-loaded β-cyclodextrin sulfate, and these vessels were implanted into the rat common carotid artery. After 3 months, micro-CT results showed that the TEBVs modified using icariin-loaded β-cyclodextrin sulfate had a greater patency rate. Scanning electron microscopy (SEM) and CD31 immunofluorescence results showed a better degree of endothelialization. Taken together, icariin-loaded β-cyclodextrin sulfate can achieve anticoagulation and rapid endothelialization of TEBVs to ensure their long-term patency.

Endothelialization mechanisms in vascular grafts

Despite the wide variety of tissue-engineered vascular grafts that are currently being developed, autologous vessels, such as the saphenous vein, are still the gold standard grafts for surgical treatment of vascular disease. Recently developed technologies have shown promising results in preclinical studies, but they still do not overcome the issues that native vessels present, and only a few have made the transition into clinical use. The endothelial lining is a key aspect for the success or failure of the grafts, especially on smaller diameter grafts (<5 mm). However, during the design and evaluation of the grafts, the mechanisms for the formation of this layer are not commonly examined. Therefore, a significant amount of established research might not be relevant to the clinical context, due to important differences that exist between the vascular regeneration mechanisms found in animal models and humans. This article reviews current knowledge about endothelialization mechanisms that have been so far identified: in vitro seeding, transanastomotic growth, transmural infiltration, and fallout endothelialization. Emphasis is placed on the models used for study of theses mechanisms and their effects on the development of tissue-engineering vascular conduits.

Quickening: Translational design of resorbable synthetic vascular grafts

Traditional tissue-engineered vascular grafts have yet to gain wide clinical use. The difficulty of scaling production of these cell- or biologic-based products has hindered commercialization. In situ tissue engineering bypasses such logistical challenges by using acellular resorbable scaffolds. Upon implant, the scaffolds become remodeled by host cells. This review describes the scientific and translational advantages of acellular, synthetic vascular grafts. It surveys in vivo results obtained with acellular synthetics over their fifty years of technological development. Finally, it discusses emerging principles, highlights strategic considerations for designers, and identifies questions needing additional research.

Regulation Effects of Biomimetic Hybrid Scaffolds on Vascular Endothelium Remodeling

The formation of complete and well-functioning endothelium is critical for the success of tissue-engineered vascular grafts yet remaining a fundamental challenge. Endothelium remodeling onto the lumen of tissue-engineered vascular grafts is affected by their topographical, mechanical, and biochemical characteristics. For meeting multiple requirements, composite strategies have recently emerged for fabricating hybrid scaffolds, where the integrated properties are tuned by varying their compositions. However, the underlying principle how the integrated properties of hybrid scaffolds regulate vascular endothelium remodeling remains unclear. To uncover the regulation effects of hybrid scaffolds on vascular endothelium remodeling, we prepared different biomimetic hybrid scaffolds using gelatin methacrylamide (GelMA) and poly-ε-caprolactone (PCL) and then investigated vascular endothelial cell responses on them. GelMA and PCL, respectively, conferred the resulting scaffolds with biomimetic bioactivity and mechanical properties, which were tuned by varying GelMA/PCL mass ratios (3:1, 1:1, or 1:3). On different GelMA/PCL hybrid scaffolds, distinct vascular endothelial cell responses were observed. Firm cell-scaffold/cell-cell interactions were rapidly established on the hybrid scaffolds with the highest mass ratio of bioactive GelMA. However, they were mechanically insufficient as vascular grafts. On the contrary, the scaffolds with the highest mass ratio of PCL showed significantly reinforced mechanical properties but poor biological performance. Between the two extremes, the scaffolds with the same GelMA/PCL mass ratio balanced the pros and cons of two materials. Therefore, they could meet the mechanical requirements of vascular grafts and support the early-stage vascular endothelial cell remodeling by appropriate biological signaling and mechanotransduction. This investigation experimentally proves that scaffold bioactivity is the dominant factor affecting vascular endothelial cell adhesion and remodeling, whereas mechanical properties are crucial factors for the integrity of endothelium. This work offers a universal design strategy for desirable vascular grafts for improved endothelium remodeling.

Fibronectin promotes elastin deposition, elasticity and mechanical strength in cellularised collagen-based scaffolds

One of the tightest bottlenecks in vascular tissue engineering (vTE) is the lack of strength and elasticity of engineered vascular wall models caused by limited elastic fiber deposition. In this study, flat and tubular collagen gel-based scaffolds were cellularised with vascular smooth muscle cells (SMCs) and supplemented with human plasma fibronectin (FN), a known master organizer of several extracellular matrix (ECM) fiber systems. The consequences of FN on construct maturation was investigated in terms of geometrical contraction, viscoelastic mechanical properties and deposition of core elastic fiber proteins. FN was retained in the constructs and promoted deposition of elastin by SMCs as well as of several proteins required for elastogenesis such as fibrillin-1, lysyl oxidase, fibulin-4 and latent TGF-β binding protein-4. Notably, gel contraction, tensile equilibrium elastic modulus and elasticity were strongly improved in tubular engineered tissues, approaching the behaviour of native arteries. In conclusion, this study demonstrates that FN exerts pivotal roles in directing SMC-mediated remodeling of scaffolds toward the production of a physiological-like, elastin-containing ECM with excellent mechanical properties. The developed FN-supplemented systems are promising for tissue engineering applications where the generation of mature elastic tissue is desired and represent valuable advanced in vitro models to investigate elastogenesis.

Real-time observation of leukocyte-endothelium interactions in tissue-engineered blood vessel

Human cell-based 3D tissue constructs play an increasing role in disease modeling and drug screening. Inflammation, atherosclerosis, and many autoimmune disorders involve the interactions between immune cells and blood vessels. However, it has been difficult to image and model these interactions under realistic conditions. In this study, we fabricated a perfusion and imaging chamber to allow the real-time visualization of leukocyte perfusion, adhesion, and migration inside a tissue-engineered blood vessel (TEBV). We monitored the elevated monocyte adhesion to the TEBV wall and transendothelial migration (TEM) as the TEBV endothelium was activated by the inflammatory cytokine TNF-α. We demonstrated that treatment with anti-TNF-α or an NF-kB signaling pathway inhibitor would attenuate the endothelium activation and reduce the number of leukocyte adhesion (>74%) and TEM events (>87%) close to the control. As the first demonstration of real-time imaging of dynamic cellular events within a TEBV, this work paves the way for drug screening and disease modeling in TEBV-associated microphysiological systems.

Generating vascular conduits: from tissue engineering to three-dimensional bioprinting

Vascular disease - including coronary artery disease, carotid artery disease, and peripheral vascular disease - is a leading cause of morbidity and mortality worldwide. The standard of care for restoring patency or bypassing occluded vessels involves using autologous grafts, typically the saphenous veins or internal mammary arteries. Yet, many patients who need life- or limb-saving procedures have poor outcomes, and a third of patients who need vascular intervention have multivessel disease and therefore lack appropriate vasculature to harvest autologous grafts from. Given the steady increase in the prevalence of vascular disease, there is great need for grafts with the biological and mechanical properties of native vessels that can be used as vascular conduits. In this review, we present an overview of methods that have been employed to generate suitable vascular conduits, focusing on the advances in tissue engineering methods and current three-dimensional (3D) bioprinting methods. Tissue-engineered vascular grafts have been fabricated using a variety of approaches such as using preexisting scaffolds and acellular organic compounds. We also give an extensive overview of the novel use of 3D bioprinting as means of generating new vascular conduits. Different strategies have been employed in bioprinting, and the use of cell-based inks to create de novo structures offers a promising solution to bridge the gap of paucity of optimal donor grafts. Lastly, we provide a glimpse of our work to create scaffold-free, bioreactor-free, 3D bioprinted vessels from a combination of rat vascular smooth muscle cells and fibroblasts that remain patent and retain the tensile and mechanical strength of native vessels.

Increasing Cell Seeding Density Improves Elastin Expression and Mechanical Properties in Collagen Gel-Based Scaffolds Cellularized with Smooth Muscle Cells

Vascular tissue engineering combines cells with scaffold materials in vitro aiming the development of physiologically relevant vascular models. For natural scaffolds such as collagen gels, where cells can be mixed with the material solution before gelation, cell seeding density is a key parameter that can affect extracellular matrix deposition and remodeling. Nonetheless, this parameter is often overlooked and densities sensitively lower than those of native tissues, are usually employed. Herein, the effect of seeding density on the maturation of tubular collagen gel-based scaffolds cellularized with smooth muscle cells is investigated. The compaction, the expression, and deposition of key vascular proteins and the resulting mechanical properties of the constructs are evaluated up to 1 week of maturation. Results show that increasing cell seeding density accelerates cell-mediated gel compaction, enhances elastin expression (more than sevenfold increase at the highest density, Day 7) and finally improves the overall mechanical properties of constructs. Of note, the tensile equilibrium elastic modulus, evaluated by stress-relaxation tests, reach values comparable to native arteries for the highest cell density, after a 7-day maturation. Altogether, these results show that higher cell seeding densities promote the rapid maturation of collagen gel-based vascular constructs toward structural and mechanical properties better mimicking native arteries.

Triple-Layer Vascular Grafts Fabricated by Combined E-Jet 3D Printing and Electrospinning

Small-diameter tissue-engineered vascular grafts are urgently needed for clinic arterial substitute. To simulate the structures and functions of natural blood vessels, we designed a novel triple-layer poly(ε-caprolactone) (PCL) fibrous vascular graft by combining E-jet 3D printing and electrospinning techniques. The resultant vascular graft consisted of an interior layer comprising 3D-printed highly aligned strong fibers, a middle layer made by electrospun densely fibers, and an exterior structure composed of mixed fibers fabricated by co-electrospraying. The biocompatible triple-layer graft was used for in vivo implantation, and results demonstrated that the longitudinally-aligned fibers within the lumen of the graft could enhance the proliferation and migration of endothelial cells, while maintained good mechanical properties. The exterior layer provided a pathway that encouraged cells to migrate into the scaffold after implantation. This experimental graft overcame the limitations of conventionally electrospun vascular grafts of inadequate porosity and lowly cell penetration. The unique structure of the triple-layer vascular graft promoted cell growth and infiltration in vivo, thus provided an encouraging substitute for in situ tissue engineering.

Oversized Biodegradable Arterial Grafts Promote Enhanced Neointimal Tissue Formation

Most tissue-engineered arterial grafts are complicated by aneurysmal dilation secondary to insufficient neotissue formation after scaffold degradation. The optimal graft would form an organized multilayered structure with a robust extracellular matrix that could withstand arterial pressure. The purpose of the current study was to determine how oversizing a biodegradable arterial scaffold affects long-term neotissue formation. Size-matched (1.0 mm, n = 11) and oversized (1.6 mm, n = 9) electrospun polycaprolactone/chitosan scaffolds were implanted as abdominal aortic interposition grafts in Lewis rats. The mean lumen diameter of the 1.6 mm grafts was initially greater compared with the native vessel, but matched the native aorta by 6 months. In contrast, the 1.0 mm grafts experienced stenosis at 6 and 9 months. Total neotissue area and calponin-positive neotissue area were significantly greater in the 1.6 mm grafts by 6 months and similar to the native aorta. Late-term biomechanical testing was dominated by remaining polymer, but graft oversizing did not adversely affect the biomechanics of the adjacent vessel. Oversizing tissue-engineered arterial grafts may represent a strategy to increase the formation of organized neotissue without thrombosis or adverse remodeling of the adjacent native vessel by harnessing a previously undescribed process of adaptive vascular remodeling.

Research and development of 3D printed vasculature constructs

Artificial blood vessels must be strong, flexible, and must not lead to blockage after implantation. It is therefore important to select an appropriate fabrication process for products to meet these requirements. This review discusses the current methods for making artificial blood vessels, focusing on fabrication principle, materials, and applications. Among these methods, 3D printing is very promising since it has the unique capability to make complicated three-dimensional structures with multiple types of materials, and can be completely digitalized. Therefore, new developments in 3D printing of artificial blood vessels are also summarized here. This review provides a reference for the fusion of multiple processes and further improvement of artificial blood vessel fabrication.

Current Strategies for the Manufacture of Small Size Tissue Engineering Vascular Grafts

Occlusive arterial disease, including coronary heart disease (CHD) and peripheral arterial disease (PAD), is the main cause of death, with an annual mortality incidence predicted to rise to 23.3 million worldwide by 2030. Current revascularization techniques consist of angioplasty, placement of a stent, or surgical bypass grafting. Autologous vessels, such as the saphenous vein and internal thoracic artery, represent the gold standard grafts for small-diameter vessels. However, they require invasive harvesting and are often unavailable. Synthetic vascular grafts represent an alternative to autologous vessels. These grafts have shown satisfactory long-term results for replacement of large- and medium-diameter arteries, such as the carotid or common femoral artery, but have poor patency rates when applied to small-diameter vessels, such as coronary arteries and arteries below the knee. Considering the limitations of current vascular bypass conduits, a tissue-engineered vascular graft (TEVG) with the ability to grow, remodel, and repair in vivo presents a potential solution for the future of vascular surgery. Here, we review the different methods that research groups have been investigating to create TEVGs in the last decades. We focus on the techniques employed in the manufacturing process of the grafts and categorize the approaches as scaffold-based (synthetic, natural, or hybrid) or self-assembled (cell-sheet, microtissue aggregation and bioprinting). Moreover, we highlight the attempts made so far to translate this new strategy from the bench to the bedside.

Development of biomimetic thermoplastic polyurethane/fibroin small-diameter vascular grafts via a novel electrospinning approach

A new electrospinning approach for fabricating vascular grafts with a layered, circumferentially aligned, and micro-wavy fibrous structure similar to natural elastic tissues has been developed. The customized electrospinning collector was able to generate wavy fibers using the dynamic "jump rope" collecting process, which also solved the sample removal problem for mandrel-type collectors. In this study, natural silk fibroin and synthetic thermoplastic polyurethane (TPU) were combined at different weight ratios to produce hybrid small-diameter vascular grafts. The purpose of combining these two materials was to leverage the bioactivity and tunable mechanical properties of these natural and synthetic materials. Results showed that the electrospun fiber morphology was highly influenced by the material compositions and solvents employed. All of the TPU/fibroin hybrid grafts had mechanical properties comparable to natural blood vessels. The circumferentially aligned and wavy biomimetic configuration provided the grafts with a sufficient toe region and the capacity for long-term usage under repeated dilatation and contraction. Cell culture tests with human endothelial cells (EC) also revealed high cell viability and good biocompatibility for these grafts. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 985-996, 2018.

The Heart and Great Vessels

Cardiovascular disease is the leading cause of mortality worldwide. We have made large strides over the past few decades in management, but definitive therapeutic options to address this health-care burden are still limited. Given the ever-increasing need, much effort has been spent creating engineered tissue to replaced diseased tissue. This article gives a general overview of this work as it pertains to the development of great vessels, myocardium, and heart valves. In each area, we focus on currently studied methods, limitations, and areas for future study.

Vascular Tissue Engineering: Progress, Challenges, and Clinical Promise

Although the clinical demand for bioengineered blood vessels continues to rise, current options for vascular conduits remain limited. The synergistic combination of emerging advances in tissue fabrication and stem cell engineering promises new strategies for engineering autologous blood vessels that recapitulate not only the mechanical properties of native vessels but also their biological function. Here we explore recent bioengineering advances in creating functional blood macro and microvessels, particularly featuring stem cells as a seed source. We also highlight progress in integrating engineered vascular tissues with the host after implantation as well as the exciting pre-clinical and clinical applications of this technology.

Long-term evaluation of vascular grafts with circumferentially aligned microfibers in a rat abdominal aorta replacement model

Long-term results of implants in small animal models can be used to optimize the design of grafts to further promote tissue regeneration. In previous study, we fabricated a poly(ɛ-caprolactone) (PCL) bi-layered vascular graft consisting of an internal layer with circumferentially aligned microfibers and an external layer with random nanofibers. The circumferentially oriented vascular smooth muscle cells (VSMCs) were successfully regenerated after the grafts were implanted in rat abdominal aorta for 3 months. Here we investigated the long-term (18 months) performance of the bi-layered grafts in the same model. All the grafts were patent. No thrombosis, aneurysm, or stenosis occurred. The endothelium maintained complete. However, most of circumferentially oriented VSMCs migrated to luminal surface of the grafts to form a neointima with uniform thickness. Accordingly, extracellular matrix including collagen, elastin, and glycosaminoglycan displayed high density in neointima layer while with low density in the grafts wall because of the incomplete degradation of PCL. A small amounts of calcification occurred in the grafts. The contraction and relaxation function of regenerated neoartery almost disappeared. These data indicated that based on the structure design, many other factors of grafts should be considered to achieve the regenerated neoartery similar to the native vessels after long-term implantation. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2596-2604, 2018.

Rapid Endothelialization of Off-the-Shelf Small Diameter Silk Vascular Grafts

Synthetic vascular grafts for small diameter revascularization are lacking. Clinically available conduits expanded polytetrafluorethylene and Dacron fail acutely due to thrombosis and in the longer term from neointimal hyperplasia. We report the bioengineering of a cell-free, silk-based vascular graft. In vitro we demonstrate strong, elastic silk conduits that support rapid endothelial cell attachment and spreading while simultaneously resisting blood clot and fibrin network formation. In vivo rat studies show complete graft patency at all time points, rapid endothelialization, and stabilization and contraction of neointimal hyperplasia. These studies show the potential of silk as an off-the-shelf small diameter vascular graft.

Historical Perspective and Future Direction of Blood Vessel Developments

Over the past 40 years, remarkable advances have been made in our understanding of successful blood vessel regeneration, starting with the failures of early tissue-engineered vascular grafts designed using isolated components or molecules, such as collagen gels. The vascular tissue engineers are today better educated and have steered ongoing research developments toward clinical developments of more complete vascular grafts that replicate the multitude of specialized arterial aspects required for function.

Adult Stem Cells in Vascular Remodeling

Understanding the contribution of vascular cells to blood vessel remodeling is critical for the development of new therapeutic approaches to cure cardiovascular diseases (CVDs) and regenerate blood vessels. Recent findings suggest that neointimal formation and atherosclerotic lesions involve not only inflammatory cells, endothelial cells, and smooth muscle cells, but also several types of stem cells or progenitors in arterial walls and the circulation. Some of these stem cells also participate in the remodeling of vascular grafts, microvessel regeneration, and formation of fibrotic tissue around biomaterial implants. Here we review the recent findings on how adult stem cells participate in CVD development and regeneration as well as the current state of clinical trials in the field, which may lead to new approaches for cardiovascular therapies and tissue engineering.

Recent Progress in Vascular Tissue-Engineered Blood Vessels

Cardiovascular disease is the number one cause of death in the U.S and results in the loss of approximately one million lives and more than 400 billion U.S. dollars for treatments every year. Recently, tissue engineered blood vessels have been studied and developed as promising replacements for treatment with autologous veins. Here, we summarize the cell sources and methods to make tissue-engineered blood vessels (TEBVs), the recent progress in TEBV related research, and also the recent progress in TEBV related clinical studies.

Surface modification of electrospun poly-(l-lactic) acid scaffolds by reactive magnetron sputtering

In this study, we modified the surface of bioresorbable electrospun poly-(l-lactic) acid (PLLA) scaffolds by reactive magnetron sputtering of a titanium target under a nitrogen atmosphere. We examined the influence of the plasma treatment time on the structure and properties of electrospun PLLA scaffolds using SEM, XRF, FTIR, XRD, optical goniometry, and mechanical testing. It was observed that the coating formed did not change physicomechanical properties of electrospun PLLA scaffolds and simultaneously, increased their hydrophilicity. No adverse tissue reaction up to 3 months after subcutaneous implantation of the modified scaffolds was detected in in-vivo rat model. The rate of scaffold replacement by the recipient tissue in-vivo was observed to depend on the plasma treatment time.

Regulation of macrophage polarization and promotion of endothelialization by NO generating and PEG-YIGSR modified vascular graft

As an effective clinic treatment for cardiovascular disease, vascular transplantation gains much acceptance recently. However, due to the acute thrombosis and intimal hyperplasia, long-term failure of synthetic grafts after implanted in small diameter blood vessel decelerates its commercial use. The continued acute inflammation and delayed endothelialization have been considered as fundamental reasons. To enhance the adhesion and organization of endothelial cells (ECs) and improve the vascular remodeling process, we have constructed a vascular graft based on electrospun polycaprolactone (PCL) matrix, on which organoselenium-immobilized polyethyleneimine (SePEI) for in situ nitric oxide (NO) generation and hyaluronic acid (HA) grafted with poly (ethylene glycol) (PEG) modified Tyr-Ile-Gly-Ser-Arg (YIGSR) for antifouling and EC adhesion were deposited through electrostatic layer-by-layer assembly. The in vitro results showed that SePEI deposited on the grafts could catalyze stable generation of NO. After in situ implantation in rats for 4 and 8weeks, the graft promoted the transformation of macrophages into an anti-inflammatory phenotype (M2), which helped endothelium remodeling. YIGSR on the outmost layer facilitated more rapid and organized EC adhesion compared to PCL and non-modified grafts. PEG polymer chain on the outmost layer mitigated nonspecific adsorption of undesirable blood components. In our study, we first demonstrated the regulation of macrophage polarization by an NO-generating vascular graft. The results indicated that the approach of anti-inflammatory macrophage polarization and enhanced endothelialization through NO generation and PEG-modified YIGSR in our study may provide a new perspective for the clinic application of cell-free small-diameter vascular grafts.

Tissue-Engineered Vascular Graft of Small Diameter Based on Electrospun Polylactide Microfibers

Tubular vascular grafts 1.1 mm in diameter based on poly(L-lactide) microfibers were obtained by electrospinning. X-ray diffraction and scanning electron microscopy data demonstrated that the samples treated at T = 70°C for 1 h in the fixed state on a cylindrical mandrel possessed dense fibrous structure; their degree of crystallinity was approximately 44%. Strength and deformation stability of these samples were higher than those of the native blood vessels; thus, it was possible to use them in tissue engineering as bioresorbable vascular grafts. The experiments on including implantation into rat abdominal aorta demonstrated that the obtained vascular grafts did not cause pathological reactions in the rats; in four weeks, inner side of the grafts became completely covered with endothelial cells, and fibroblasts grew throughout the wall. After exposure for 12 weeks, resorption of PLLA fibers started, and this process was completed in 64 weeks. Resorbed synthetic fibers were replaced by collagen and fibroblasts. At that time, the blood vessel was formed; its neointima and neoadventitia were close to those of the native vessel in structure and composition.

The Self-Assembling Process and Applications in Tissue Engineering

Tissue engineering strives to create neotissues capable of restoring function. Scaffold-free technologies have emerged that can recapitulate native tissue function without the use of an exogenous scaffold. This review will survey, in particular, the self-assembling and self-organization processes as scaffold-free techniques. Characteristics and benefits of each process are described, and key examples of tissues created using these scaffold-free processes are examined to provide guidance for future tissue-engineering developments. We aim to explore the potential of self-assembly and self-organization scaffold-free approaches, detailing the recent progress in the in vitro tissue engineering of biomimetic tissues with these methods toward generating functional tissue replacements.

Advances in the generation of bioengineered bile ducts

The generation of bioengineered biliary tissue could contribute to the management of some of the most impactful cholangiopathies associated with liver transplantation, such as biliary atresia or ischemic cholangiopathy. Recent advances in tissue engineering and in vitro cholangiocyte culture have made the achievement of this goal possible. Here we provide an overview of these developments and review the progress towards the generation and transplantation of bioengineered bile ducts. This article is part of a Special Issue entitled: Cholangiocytes in Health and Diseaseedited by Jesus Banales, Marco Marzioni and Peter Jansen.

Ultrastructural analysis and residual DNA evaluation of rabbit vein scaffold

PURPOSE

To investigate the ultrastructural characteristics and analysis of residual DNA in scaffold models, produced with decellularized vena cava in an experimental model with rabbits.

METHODS

Three groups were created for ultrastructural and residual DNA analysis: group 1 - control, consisting of samples of vena cava in natura; group 2 - SD, consisting of vein fragments submitted to 2% sodium deoxycholate decellularization by shaking (160rpm - Shaker News Brunswick Scientific®) for 1 hour at controlled temperature shaker at 37°C; group 3 - SDS, consisting of vein fragments submitted to 1% sodium dodecyl sulfate decellularization under the same previous condition, for 2 hours.

RESULTS

The ultrastructural matrix of the blood vessel maintained its vintegrity after either decellularization models. The results of the two quantification methods demonstrated a significant decrease in the DNA content of the decellularized vena cava samples as compared to the control samples and, differed statistically from each other, p <0.05.

CONCLUSION

The 2% DS protocol for vein decellularization, in this experimental model, was considered the best protocol because it presented less amount of residual DNA without causing substantial destruction of the extracellular matrix.

Development and characterization of hybrid tubular structure of PLCL porous scaffold with hMSCs/ECs cell sheet

Tissue engineering offers an alternate approach to providing vascular graft with potential to grow similar with native tissue by seeding autologous cells into biodegradable scaffold. In this study, we developed a combining technique by layering a sheet of cells onto a porous tubular scaffold. The cell sheet prepared from co-culturing human mesenchymal stem cells (hMSCs) and endothelial cells (ECs) were able to infiltrate through porous structure of the tubular poly (lactide-co-caprolactone) (PLCL) scaffold and further proliferated on luminal wall within a week of culture. Moreover, the co-culture cell sheet within the tubular scaffold has demonstrated a faster proliferation rate than the monoculture cell sheet composed of MSCs only. We also found that the co-culture cell sheet expressed a strong angiogenic marker, including vascular endothelial growth factor (VEGF) and its receptor (VEGFR), as compared with the monoculture cell sheet within 2 weeks of culture, indicating that the co-culture system could induce differentiation into endothelial cell lineage. This combined technique would provide cellularization and maturation of vascular construct in relatively short period with a strong expression of angiogenic properties.

An in vivo study on endothelialized vascular grafts produced by autologous biotubes and adipose stem cells (ADSCs)

Currently, commercial synthetic vascular grafts made from Dacron and ePTFE for small-diameter, vascular applications (<6 mm) show limited reendothelization and are less compliant, often resulting in thrombosis and intimal hyperplasia. Although good blood compatibility can be achieved in autologous arteries and veins, the number of high quality harvest sites is limited, and the grafts are size-mismatched for use in the fistula or cardiovascular bypass surgery; thus, alternative small graft substitutes must be developed. A biotube is an in vivo, tissue-engineered approach for the growth of autologous grafts through the subcutaneous implantation of an inert rod through the inflammation process. In the present study, we embedded silicone rods with a diameter of 2 mm into the dorsal subcutaneous tissue of rabbits for 4 weeks to grow biotubes. The formation of functional endothelium cells aligned on the inner wall surface was achieved by seeding with adipose stem cells (ADSCs). The ADSCs-seeded biotubes were implanted into the carotid artery of rabbits for more than 1 month, and the patency rates and remodeling of endothelial cells were observed by angiography and fluorescence staining, respectively. Finally, the mechanical properties of the biotube were also evaluated. The fluorescence staining results showed that the ADSCs differentiated not only into endothelia cells but also into smooth muscle cells. Moreover, the patency of the ADSCs-seeded biotube remained high for at least 5 months. These small-sized ADSCs-seeded vascular biotubes may decrease the rate of intimal hyperplasia during longer implantation times and have potential clinical applications in the future.

Bioreactor-induced mesenchymal progenitor cell differentiation and elastic fiber assembly in engineered vascular tissues

In vitro maturation of engineered vascular tissues (EVT) requires the appropriate incorporation of smooth muscle cells (SMC) and extracellular matrix (ECM) components similar to native arteries. To this end, the aim of the current study was to fabricate 4mm inner diameter vascular tissues using mesenchymal progenitor cells seeded into tubular scaffolds. A dual-pump bioreactor operating either in perfusion or pulsatile perfusion mode was used to generate physiological-like stimuli to promote progenitor cell differentiation, extracellular elastin production, and tissue maturation. Our data demonstrated that pulsatile forces and perfusion of 3D tubular constructs from both the lumenal and ablumenal sides with culture media significantly improved tissue assembly, effectively inducing mesenchymal progenitor cell differentiation to SMCs with contemporaneous elastin production. With bioreactor cultivation, progenitor cells differentiated toward smooth muscle lineage characterized by the expression of smooth muscle (SM)-specific markers smooth muscle alpha actin (SM-α-actin) and smooth muscle myosin heavy chain (SM-MHC). More importantly, pulsatile perfusion bioreactor cultivation enhanced the synthesis of tropoelastin and its extracellular cross-linking into elastic fiber compared with static culture controls. Taken together, the current study demonstrated progenitor cell differentiation and vascular tissue assembly, and provides insights into elastin synthesis and assembly to fibers.

STATEMENT OF SIGNIFICANCE

Incorporation of elastin into engineered vascular tissues represents a critical design goal for both mechanical and biological functions. In the present study, we seeded porous tubular scaffolds with multipotent mesenchymal progenitor cells and cultured in dual-pump pulsatile perfusion bioreactor. Physiological-like stimuli generated by bioreactor not only induced mesenchymal progenitor cell differentiation to vascular smooth muscle lineage but also actively promoted elastin synthesis and fiber assembly. Gene expression and protein synthesis analyses coupled with histological and immunofluorescence staining revealed that elastin-containing vascular tissues were fabricated. More importantly, co-localization and co-immunoprecipitation experiments demonstrated that elastin and fibrillin-1 were abundant throughout the cross-section of the tissue constructs suggesting a process of elastin protein crosslinking. This study paves a way forward to engineer elastin-containing functional vascular substitutes from multipotent progenitor cells in a bioreactor.

Vascular Tissue Engineering: Effects of Integrating Collagen into a PCL Based Nanofiber Material

The engineering of vascular grafts is a growing field in regenerative medicine. Although numerous attempts have been made, the current vascular grafts made of polyurethane (PU), Dacron®, or Teflon® still display unsatisfying results. Electrospinning of biopolymers and native proteins has been in the focus of research to imitate the extracellular matrix (ECM) of vessels to produce a small caliber, off-the-shelf tissue engineered vascular graft (TEVG) as a substitute for poorly performing PU, Dacron, or Teflon prostheses. Blended poly-ε-caprolactone (PCL)/collagen grafts have shown promising results regarding biomechanical and cell supporting features. In order to find a suitable PCL/collagen blend, we fabricated plane electrospun PCL scaffolds using various collagen type I concentrations ranging from 5% to 75%. We analyzed biocompatibility and morphological aspects in vitro. Our results show beneficial features of collagen I integration regarding cell viability and functionality, but also adverse effects like the loss of a confluent monolayer at high concentrations of collagen. Furthermore, electrospun PCL scaffolds containing 25% collagen I seem to be ideal for engineering vascular grafts.

Vascular scaffolds with enhanced antioxidant activity inhibit graft calcification

There is a need for off-the-shelf, small-diameter vascular grafts that are safe and exhibit high long-term patency. Decellularized tissues can potentially be used as vascular grafts; however, thrombogenic and unpredictable remodeling properties such as intimal hyperplasia and calcification are concerns that hinder their clinical use. The objective of this study was to investigate the long-term function and remodeling of extracellular matrix (ECM)-based vascular grafts composited with antioxidant poly(1, 8-octamethylene-citrate-co-cysteine) (POCC) with or without immobilized heparin. Rat aortas were decellularized to create the following vascular grafts: 1) ECM hybridized with POCC (Poly-ECM), 2) Poly-ECM subsequently functionalized with heparin (Poly-ECM-Hep), and 3) non-modified vascular ECM. Grafts were evaluated as interposition grafts in the abdominal aorta of adult rats at three months. All grafts displayed antioxidant activity, were patent, and exhibited minimal intramural cell infiltration with varying degrees of calcification. Areas of calcification co-localized with osteochondrogenic differentiation of vascular smooth muscle cells, lipid peroxidation, oxidized DNA damage, and cell apoptosis, suggesting an important role for oxidative stress in the calcification of grafts. The extent of calcification within grafts was inversely proportional to their antioxidant activity: Poly-ECM-Hep > ECM > Poly-ECM. The incorporation of antioxidants into vascular grafts may be a viable strategy to inhibit degenerative changes.

Electrospun vein grafts with high cell infiltration for vascular tissue engineering

Demand is increasing for functional small-diameter vascular grafts (diameter<6mm) for clinical arterial replacement. In the present study, we develop a bilayer poly(ε-caprolactone, PCL) fibrous vascular graft consisting of a thin internal layer made of longitudinally aligned fibers and a relatively thick highly porous external layer. The internal layer provides a scaffold with the necessary mechanical strength and enhances the growth of endothelial cells, whereas the external layer enhances cell motility through the scaffold bulk. The biocompatibility and biological performance of bilayer fibrous scaffolds are evaluated by in vivo experiments, molecular biology, and histology studies. Our bilayer scaffolds demonstrate much better fiber alignment and higher porosity than do normal electrospun vascular grafts with randomly distributed fibers. The results suggest that the proposed grafts can overcome limitations owing to the inadequate porosity, small pores, and poor cell infiltration of scaffolds fabricated by conventional electrospinning. The unique structure of bilayer scaffolds is satisfactory and promotes cell proliferation, collagen-fiber deposition, and ingrowth of smooth muscle cells and endothelial cells in vivo. The results of this study illustrate the strong potential of such bilayer fibrous scaffolds for vascular tissue engineering and regeneration.

In Vitro Mechanical Property Evaluation of Chitosan-Based Hydrogels Intended for Vascular Graft Development

Vascular grafts made of synthetic polymers perform poorly in cardiac and peripheral bypass applications. In these applications, chitosan-based materials can be produced and shaped to provide a novel scaffold for vascular tissue engineering. The goal of this study was to evaluate in vitro the mechanical properties of a novel chitosan formulation to assess its potential for this scaffold. Two chitosan-based hydrogel tubes were produced by modulating chitosan concentration. Based on the standard ISO 7198:1998, the hydrogel tubes were characterized in vitro in terms of suture retention strength, tensile strength, compliance, and burst pressure. By increasing chitosan concentration, suture retention value increased to reach 1.1 N; average burst strength and elastic moduli also increased significantly. The compliance seemed to exhibit a low value for chitosan tubes of high concentration. By modulating chitosan concentration, we produced scaffolds with suitable mechanical properties to be implanted in vivo and withstand physiological blood pressures.

A novel targeted angiogenesis technique using VEGF conjugated magnetic nanoparticles and in-vitro endothelial barrier crossing

Background

Vascular endothelial growth factor is well known for its angiogenesis potential. The study was performed to determine the possible pro-angiogenic role of magnetic nanoparticles coupled to VEGF in vitro and their capacity to cross an endothelial monolayer. This novel treatment technique for angiogenesis could be potentially useful for therapeutic purposes using magnetic nanoparticles.

Methods

Magnetic nanoparticles (MN) were synthesized and were conjugated with the vascular endothelial growth factor. The particles were tested in vitro in a 2D to 3D culture system. MN was seeded in different positions in relation to an HUVEC spheroid to assess a preferential migration.

To evaluate the MN capacity to cross the endothelial barrier, a confluent monolayer of HUVEC cells was seeded on top of a collagen gel. MN was placed in dissolution on the cell culture media, and the MN position was determined by confocal microscopy for 24 h.

Results

HUVEC spheroids were able to generate a preferential sprouting depending on the MN position. Meanwhile, there was random migration when the MN’s were placed all over the collagen gel and no sprouting when no MN was added. The trans-endothelial migration capacity of the MN was observed after 20 h in culture in the absence of external stimuli.

Conclusion

Here we show in vitro angiogenesis following the distribution of the MN conjugated with growth factors. These nanoparticles could be controlled with a magnet to place them in the ischemic area of interest and speed up vascular recovery. Also, MN has potentials to cross endothelium, opening the doors to a possible intravascular and extravascular treatment.

Electronic supplementary material

The online version of this article (doi:10.1186/s12872-017-0643-x) contains supplementary material, which is available to authorized users.