Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology

Embedded Host/Guest Alloy Aggregations Enable High-Performance Ternary Organic Photovoltaics

The ternary strategy has been intensively studied to improve the power conversion efficiencies of organic photovoltaics. Thereinto, the location of the guest component plays a critical role, but few reports have been devoted to this concern. Hereon, the distribution of LA1 as a guest acceptor in a variety of ternary scenarios is reported and the dominating driving forces of managing the guest distribution and operating modes are outlined. Governed by the appropriate relationship of compatibility, crystallinity, and surface energies between host and guest acceptors, as well as interfacial interactions between donor and dual acceptors, most of the LA1 molecules permeate into the internal of host acceptor phases, forming embedded host/guest alloy-like aggregations. The characteristic distributions greatly optimize the morphologies, maximize energy transfer, and enhance exciton/charge behaviors. Particularly, PM6:IT-4F:LA1 ternary cells afford high efficiency of 15.27% with impressive fill factors (FF) over 81%. The popularization studies further verify the superiority of the LA1-involved alloy structures, and with the Y6-family acceptor as the host component, an outstanding efficiency of 19.17% is received. The results highlight the importance of guest distribution in ternary systems and shed light on the governing factors of distributing the guests in ternary cells.

The Synthesis of a Multiple D-A Conjugated Macrocycle and Its Application in Organic Photovoltaic

As a novel class of materials, D-A conjugated macrocycles hold significant promise for chemical science. However, their potential in photovoltaic remains largely untapped due to the complexity of introducing multiple donor and acceptor moieties into the design and synthesis of cyclic π-conjugated molecules. Here, we report a multiple D-A ring-like conjugated molecule (RCM) via the coupling of dimer molecule DBTP-C3 as a template and thiophenes in high yields. RCM exhibits a narrow optical gap (1.33 eV) and excellent thermal stability, and shows a remarkable photoluminescence yield (ΦPL ) of 11.1 % in solution, much higher than non-cyclic analogues. Organic solar cell (OSC) constructed with RCM as electron acceptor shows efficient charge separation at donor-acceptor band offsets and achieves a power conversion efficiency (PCE) of 14.2 %-approximately fourfold higher than macrocycle-based OSCs reported so far. This is partly due to low non-radiative voltage loss down to 0.20 eV and a high electroluminescence yield (ΦEL ) of 4×10-4 . Our findings emphasize the potential of D-A cyclic conjugated molecules in advancing organic photovoltaic technology.

Additive-free molecular acceptor organic solar cells processed from a biorenewable solvent approaching 15% efficiency

We report on the use of molecular acceptors (MAs) and donor polymers processed with a biomass-derived solvent (2-methyltetrahydrofuran, 2-MeTHF) to facilitate bulk heterojunction (BHJ) organic photovoltaics (OPVs) with power conversion efficiency (PCE) approaching 15%. Our approach makes use of two newly designed donor polymers with an opened ring unit in their structures along with three molecular acceptors (MAs) where the backbone and sidechain were engineered to enhance the processability of BHJ OPVs using 2-MeTHF, as evaluated by an analysis of donor-acceptor (D-A) miscibility and interaction parameters. To understand the differences in the PCE values that ranged from 9-15% as a function of composition, the surface, bulk, and interfacial BHJ morphologies were characterized at different length scales using atomic force microscopy, grazing-incidence wide-angle X-ray scattering, resonant soft X-ray scattering, X-ray photoelectron spectroscopy, and 2D solid-state nuclear magnetic resonance spectroscopy. Our results indicate that the favorable D-A intermixing that occurs in the best performing BHJ film with an average domain size of ∼25 nm, high domain purity, uniform distribution and enhanced local packing interactions - facilitates charge generation and extraction while limiting the trap-assisted recombination process in the device, leading to high effective mobility and good performance.

Donor-Acceptor Copolymers with 9-(2-Ethylhexyl)carbazole or Dibenzothiophene-5,5-dioxide Donor Units and 5,6-Difluorobenzo[c][1,2,5]thiadiazole Acceptor Units for Photonics

Semiconducting polymers, particularly of the third generation, including donor-acceptor (D-A) copolymers, are extensively studied due to their huge potential for photonic and electronic applications. Here, we report on two new D-A copolymers, CP1 and CP2, composed of different electron-donor (D) units: 9-(2-ethylhexyl)carbazole or dibenzothiophene-5,5-dioxide, respectively, and of 4,7-bis(4'-(2-octyldodecyl)thiophen-2'-yl)-5,6-difluorobenzo[c][1,2,5]thiadiazole building block with central 5,6-difluorobenzo[c][1,2,5]thiadiazole electron-acceptor (A) units, which were synthesized by Suzuki coupling in the high-boiling solvent xylene and characterized. The copolymers exhibited very good thermal and oxidation stability. A copolymer CP1 with different molecular weights was prepared in order to facilitate a comparison of CP1 with CP2 of comparable molecular weight and to reveal the relationship between molecular weight and properties. The photophysical, electrochemical, and electroluminescence properties were examined. Intense red photoluminescence (PL) with higher PL efficiencies for CP1 than for CP2 was observed in both solutions and films. Red shifts in the PL thin film spectra compared with the PL solution spectra indicated aggregate formation in the solid state. X-ray diffraction measurements revealed differences in the arrangement of molecules in thin films depending on the molecular weight of the copolymers. Light-emitting devices with efficient red emission and low onset voltages were prepared and characterized.

Oligomerized Fused-Ring Electron Acceptors for Efficient and Stable Organic Solar Cells

Organic solar cells (OSCs) have attracted wide research attention in the past decades. Very recently, oligomerized fused-ring electron acceptors (OFREAs) have emerged as a promising alternative to small-molecular/polymeric acceptor-based OSCs due to their unique advantages such as well-defined structures, batch reproducibility, good film formation, low diffusion coefficient, and excellent stability. So far, rapid advances have been made in the development of OFREAs consisting of directly/rigidly/flexibly linked oligomers and fused ones. In this Minireview, we systematically summarized the recent research progress of OFREAs, including structural diversity, synthesis approach, molecular conformation and packing, and long-term stability. Finally, we conclude with future perspectives on the challenges to be addressed and potential research directions. We believe that this Minireview will encourage the development of novel OFREAs for OSC applications.

Comparative Study of the Optical and Electronic Properties of Y6 Derivatives: A Theoretical Study

A series of Y-series nonfullerene acceptors (Y-NFAs) including symmetric acceptors (Y6 and TTY6) as well as asymmetric acceptors (KY6, TY6, and KTY6) have been constructed, and the electronic structure, electronic properties, and excited-state properties have been comparatively studied. The optoelectronic properties, interfacial charge-transfer (CT) mechanism, and interfacial CT rate for the solar cells composed of PM6 as the donor and Y6 derivatives as the acceptors are investigated further. We show that asymmetric Y6 derivatives have high molecular planarity, strong and wide absorption spectra, and large intramolecular charge transfer (ICT). For the solar cells, the complexes of Y6 derivatives show increased open-circuit voltage, larger fill factor, and smaller energy loss compared to Y6. In addition, the complexes of Y6 derivatives have more charge-transfer states than Y6 in the low-energy region, such that there are multiple ways for CT generations, such as hot excitation, intermolecular electric field (IEF), and direct excitation. The detailed CT mechanism as well as interfacial CT rate depends on the type of complexes, and all Y6 derivatives have a similar magnitude of charge-transfer rate to the one of Y6. This work not only reveals the differences in performance between symmetric and asymmetric NFA but also reveals that proper terminal tuning is an effective way to improve photovoltaic properties.

Geminal-Based Strategies for Modeling Large Building Blocks of Organic Electronic Materials

We elaborate on unconventional electronic structure methods based on geminals and their potential to advance the rapidly developing field of organic photovoltaics (OPVs). Specifically, we focus on the computational advantages of geminal-based methods over standard approaches and identify the critical aspects of OPV development. Examples are reliable and efficient computations of orbital energies, electronic spectra, and van der Waals interactions. Geminal-based models can also be combined with quantum embedding techniques and a quantum information analysis of orbital interactions to gain a fundamental understanding of the electronic structures and properties of realistic OPV building blocks. Furthermore, other organic components present in, for instance, dye-sensitized solar cells (DSSCs) represent another promising scope of application. Finally, we provide numerical examples predicting the properties of a small building block of OPV components and two carbazole-based dyes proposed as possible DSSC sensitizers.

Observation of aligned dipoles and angular chromism of exciplexes in organic molecular heterostructures

The dipole characteristics of Frenkel excitons and charge-transfer excitons between donor and acceptor molecules in organic heterostructures such as exciplexes are important in organic photonics and optoelectronics. For the bilayer of the organic donor 4,4',4''-tris[(3-methylphenyl)phenylamino]triphenylamine and acceptor 2,4,6-tris(biphenyl-3-yl)-1,3,5-triazine molecules, the exciplexes form aligned dipoles perpendicular to the Frenkel excitons, as observed in back focal plane photoluminescence images. The angular chromism of exciplexes observed in the 100 meV range indicates possible delocalization and angle-sensing photonic applications. The blue shift of the peak position and increase in the linewidth of photoluminescene spectra with increasing excitation power are caused by the repulsive aligned exciplex dipole moments with a long lifetime (4.65 μs). Electroluminescence spectra of the exciplex from organic light-emitting diodes using the bilayer are blue-shifted with increasing bias, suggesting unidirectional alignment of the exciplex dipole moments. The observation of exciplex dipole moment alignments across molecular interfaces can facilitate the controlled coupling of exciton species and increase efficiency of organic light-emitting diodes.

Central unit hetero-di-halogenation of acceptors enables organic solar cells with 19% efficiency

Although peripheral hetero-di-halogenation of non-fullerene acceptors (NFAs) would allow more precise optimization of molecular properties by providing the complementary advantages of two different halogens, thus enabling further improvements of organic solar cells (OSCs), hetero-di-halogenated NFAs are seldom prepared due to the challenging construction of building blocks with two adjacent hetero-halogens. Herein, three CH-series acceptors with hetero-di-halogenated central units, named CH-FC, CH-FB and CH-CB, are constructed successfully. PM6:D18:CH-FB-based OSCs afforded an attractive PCE of 19.0% due to tighter intermolecular packing at both the single-crystal and blended-film levels, more efficient charge transfer/dissociation, and superior film morphology compared to those of PM6:D18:CH-FC (PCE 18.41%) and PM6:D18:CH-CB (PCE 18.21%). Our work highlights the effectiveness of such a CH-series molecular platform in conducting hetero-di-halogenation and achieving high-performance OSCs, and will stimulate further exploration of hetero-substitution-based acceptors.

Green-Solvent Processed Blade-Coating Organic Solar Cells with an Efficiency Approaching 19% Enabled by Alkyl-Tailored Acceptors

Power-conversion-efficiencies (PCEs) of organic solar cells (OSCs) in laboratory, normally processed by spin-coating technology with toxic halogenated solvents, have reached over 19%. However, there is usually a marked PCE drop when the blade-coating and/or green-solvents toward large-scale printing are used instead, which hampers the practical development of OSCs. Here, a new series of N-alkyl-tailored small molecule acceptors named YR-SeNF with a same molecular main backbone are developed by combining selenium-fused central-core and naphthalene-fused end-group. Thanks to the N-alkyl engineering, NIR-absorbing YR-SeNF series show different crystallinity, packing patterns, and miscibility with polymeric donor. The studies exhibit that the molecular packing, crystallinity, and vertical distribution of active layer morphologies are well optimized by introducing newly designed guest acceptor associated with tailored N-alkyl chains, providing the improved charge transfer dynamics and stability for the PM6:L8-BO:YR-SeNF-based OSCs. As a result, a record-high PCE approaching 19% is achieved in the blade-coating OSCs fabricated from a green-solvent o-xylene with high-boiling point. Notably, ternary OSCs offer robust operating stability under maximum-power-point tracking and well-keep > 80% of the initial PCEs for even over 400 h. Our alkyl-tailored guest acceptor strategy provides a unique approach to develop green-solvent and blade-coating processed high-efficiency and operating stable OSCs, which paves a way for industrial development.

Fused-Ring Electron-Acceptor Single Crystals with Chiral 2D Supramolecular Organization for Anisotropic Chiral Optoelectronic Devices

Supramolecular chiral organization gives π-conjugated molecules access to fascinating specific interactions with circularly polarized light (CPL). Such a feature enables the fabrication of high-performance chiral organic electronic devices that detect or emit CPL directly. Herein, it is shown that chiral fused-ring electron-acceptor BTP-4F single-crystal-based phototransistors demonstrate distinguished CPL discrimination capability with current dissymmetry factor exceeding 1.4, one of the highest values among state-of-the-art direct CPL detectors. Theoretical calculations prove that the chirality at the supramolecular level in these enantiomeric single crystals originates from chiral exciton coupling of a unique quasi-2D supramolecular organization consisting of interlaced molecules with opposite helical conformation. Impressively, such supramolecular organization produces a higher dissymmetry factor along the preferred growth direction of the chiral single crystals in comparison to that of the short axis direction. Furthermore, the amplified, inverted, and also anisotropic current dissymmetry compared to optical dissymmetry is studied by finite element simulations. Therefore, a unique chiral supramolecular organization that is responsible for the excellent chiroptical response and anisotropic electronic properties is developed, which not only enables the construction of high-performance CPL detection devices but also allows a better understanding of the structure-property relationships in chiral organic optoelectronics.

Solution Processed Semi-Transparent Organic Solar Cells Over 50% Visible Transmittance Enabled by Silver Nanowire Electrode with Sandwich Structure

Photovoltaic windows with easy installation for the power supply of household appliances have long been a desire of energy researchers. However, due to the lack of top electrodes that offer both high transparency and low sheet resistance, the development of high-transparency photovoltaic windows for indoor lighting scenarios has lagged significantly behind photovoltaic windows where privacy issues are involved. Addressing this issue, this work develops a solution-processable transparent top electrode using sandwich structure silver nanowires, realizing high transparency in semi-transparent organic solar cells. The wettability and conducting properties of the electrode are improved by a modified hole-transport layer named HP. The semi-transparent solar cell exhibits good see-through properties at a high average visible transmittance of 50.8%, with power conversion efficiency of 7.34%, and light utilization efficiency of 3.73%, which is the highest without optical modulations. Moreover, flexible devices based on the above-mentioned architecture also show excellent mechanical tolerance compared with Ag electrode counterparts, which retains 94.5% of their original efficiency after 1500 bending cycles. This work provides a valuable approach for fabricating solution-processed high transparency organic solar cells, which is essential in future applications in building integrated photovoltaics.

Achieved 18.9% Efficiency by Fine-Tuning Non-Fullerene Acceptor Content to Simultaneously Increase the Short-Circuit Current and Fill Factor of Organic Solar Cells

In this study, using PM6:L8-BO as the main system and non-fullerene acceptor IDIC as the third component, a series of ternary organic solar cells (TOSCs) are fabricated. The results reveal that IDIC plays a significant role in enhancing the performance of TOSCs by optimizing the morphology of blended films and forming interpenetrating nanostructure. The improved film morphology facilitates exciton dissociation and collection in TOSCs, which causes an increase in the short-circuit current density (JSC ) and fill factor (FF). Further, by optimizing the IDIC content, the power conversion efficiency (PCE) of TOSCs reaches 18.9%. Besides, the prepared TOSCs exhibit a JSC of 27.51 mA cm-2 and FF of 76.64%, which are much higher than those of PM6:L8-BO-based organic solar cells (OSCs). Furthermore, the addition of IDIC improves the long-term stability of the OSCs. Meanwhile, TOSCs with a large effective area of 1.00 cm2 have been prepared, which exhibit a PCE of 12.4%. These findings suggest that modifying the amount of the third component can be a useful strategy to construct hight-efficiency TOSCs with practical application potential.

Transparent Recombination Electrode with Dual-Functional Transport and Protective Layer for Efficient and Stable Monolithic Perovskite/Organic Tandem Solar Cells

Rational selection and design of recombination electrodes (RCEs) are crucial to enhancing the power conversion efficiency (PCE) and stability of monolithic tandem solar cells (TSCs). Sputtered indium tin oxide (ITO) with high conductivity and excellent transmittance is introduced as RCE in perovskite/organic TSCs. To prevent high-energy ITO particles destroy the underlying material during sputtering, dual-functional transport and protective layer (C1) is employed. The styryl group in C1 can be thermally crosslinked to serve as a sputtering protective layer. Meanwhile, the conjugated phenanthroline skeleton in C1 shows high electron mobility and hole blocking capability to promote the electron transport process at the interfaces and effectively reduce charge accumulation. Monolithic perovskite/organic TSC with high PCE of 24.07% and excellent stability is demonstrated by stacking a 1.77 eV bandgap perovskite layer and a 1.35 eV bandgap organic active layer. This strategy provides new insights for overcoming the fundamental efficiency limits of single-junction devices and promotes the further development of TSC devices.

Auxiliary sequential deposition enables 19%-efficiency organic solar cells processed from halogen-free solvents

High-efficiency organic solar cells are often achieved using toxic halogenated solvents and additives that are constrained in organic solar cells industry. Therefore, it is important to develop materials or processing methods that enabled highly efficient organic solar cells processed by halogen free solvents. In this paper, we report an innovative processing method named auxiliary sequential deposition that enables 19%-efficiency organic solar cells processed by halogen free solvents. Our auxiliary sequential deposition method is different from the conventional blend casting or sequential deposition methods in that it involves an additional casting of dithieno[3,2-b:2',3'-d]thiophene between the sequential depositions of the donor (D18-Cl) and acceptor (L8-BO) layers. The auxiliary sequential deposition method enables dramatic performance enhancement from 15% to over 18% compared to the blend casting and sequential deposition methods. Furthermore, by incorporating a branched-chain-engineered acceptor called L8-BO-X, device performance can be boosted to over 19% due to increased intermolecular packing, representing top-tier values for green-solvent processed organic solar cells. Comprehensive morphological and time-resolved characterizations reveal that the superior blend morphology achieved through the auxiliary sequential deposition method promotes charge generation while simultaneously suppressing charge recombination. This research underscores the potential of the auxiliary sequential deposition method for fabricating highly efficient organic solar cells using environmentally friendly solvents.

Complete Peripheral Fluorination of the Small-Molecule Acceptor in Organic Solar Cells Yields Efficiency over 19

Due to the intrinsically flexible molecular skeletons and loose aggregations, organic semiconductors, like small molecular acceptors (SMAs) in organic solar cells (OSCs), greatly suffer from larger structural/packing disorders and weaker intermolecular interactions comparing to their inorganic counterparts, further leading to hindered exciton diffusion/dissociation and charge carrier migration in resulting OSCs. To overcome this challenge, complete peripheral fluorination was performed on basis of a two-dimensional (2D) conjugation extended molecular platform of CH-series SMAs, rendering an acceptor of CH8F with eight fluorine atoms surrounding the molecular backbone. Benefitting from the broad 2D backbone, more importantly, strengthened fluorine-induced secondary interactions, CH8F and its D18 blends afford much enhanced and more ordered molecular packings accompanying with enlarged dielectric constants, reduced exciton binding energies and more obvious fibrillary networks comparing to CH6F controls. Consequently, D18:CH8F-based OSCs reached an excellent efficiency of 18.80 %, much better than that of 17.91 % for CH6F-based ones. More excitingly, by employing D18-Cl that possesses a highly similar structure to D18 as a third component, the highest efficiency of 19.28 % for CH-series SMAs-based OSCs has been achieved so far. Our work demonstrates the dramatical structural multiformity of CH-series SMAs, meanwhile, their high potential for constructing record-breaking OSCs through peripheral fine-tuning.

Molecular Stacking and Aggregation Optimization of Photoactive Layer through Solid Additive Enables High-Performance Organic Solar Cells

Regulating molecular packing and aggregation of photoactive layer is a critical but challenging issue in developing high-performance organic solar cells. Herein, two structurally similar analogues of anthra[2,3-b : 6,7-b']dithiophene (ADT) and naphtho[1,2-b : 5,6-b']dithiophene (NDT) are developed as solid additive to exploit their effect in regulating the molecular aggregation and π-stacking of photoactive layer. We clarify that the perpendicular arrangements of NDT can enlarge the molecular packing space and improve the face-on stacking of Y6 during the film formation, favoring a more compact and ordered long-range π-π stacking in the out-of-plane direction after the removal of NDT under thermal annealing. The edge-to-face stacked herringbone-arrangement of ADT along with its non-volatilization under thermal annealing can induce the coexistence of face-on and edge-on stacking of blend film. As a result, the NDT treatment shows encouraging effect in improving the photovoltaic performance of devices based on various systems. Particularly, a remarkable PCE of 18.85 % is achieved in the PM6 : L8-BO-based device treated by NDT additive, which is a significant improvement with regard to the PCE of 16.41 % for the control device. This work offers a promising strategy to regulate the molecular packing and aggregation of photoactive layer towards significantly improved performance and stability of organic solar cells.

Electronic Configuration Tuning of Centrally Extended Non-Fullerene Acceptors Enabling Organic Solar Cells with Efficiency Approaching 19

In the molecular optimizations of non-fullerene acceptors (NFAs), extending the central core can tune the energy levels, reduce nonradiative energy loss, enhance the intramolecular (donor-acceptor and acceptor-acceptor) packing, facilitate the charge transport, and improve device performance. In this study, a new strategy was employed to synthesize acceptors featuring conjugation-extended electron-deficient cores. Among these, the acceptor CH-BBQ, embedded with benzobisthiadiazole, exhibited an optimal fibrillar network morphology, enhanced crystallinity, and improved charge generation/transport in blend films, leading to a power conversion efficiency of 18.94 % for CH-BBQ-based ternary organic solar cells (OSCs; 18.19 % for binary OSCs) owing to its delicate structure design and electronic configuration tuning. Both experimental and theoretical approaches were used to systematically investigate the influence of the central electron-deficient core on the properties of the acceptor and device performance. The electron-deficient core modulation paves a new pathway in the molecular engineering of NFAs, propelling relevant research forward.

Progress in organic photovoltaics based on green solvents: from solubility enhancement to morphology optimization

Solution-processed organic photovoltaics (OPVs) is one of the most promising photovoltaic technologies in the energy field, due to their clean and renewable low-cost manufacturing potential. OPV has rapidly developed with the design and synthesis of highly efficient photovoltaic materials and the development of smart device engineering. To date, the majority of advanced OPV devices have been prepared using halogenated solvents, achieving power conversion efficiencies (PCE) exceeding 19% on a laboratory scale. However, for industrial-scale production, less toxic manufacturing processes and environmental sustainability are the key considerations. Therefore, this review summarizes recent advances in green solvent-based approaches for the preparation of OPVs, highlighting material design (including polymer donors and small molecule acceptors) and device engineering (co-solvent methods, additive strategies, post-treatment methods, and regulation of coating method), emphasizing crucial factors for achieving high performance in green solvent-processed OPV devices. This review presents potential future directions for green solvent-based OPVs, which may pave the way for future industrial development.

Electrostatic force promoted intermolecular stacking of polymer donors toward 19.4% efficiency binary organic solar cells

Conjugated polymers are generally featured with low structural order due to their aromatic and irregular structural units, which limits their light absorption and charge mobility in organic solar cells. In this work, we report a conjugated molecule INMB-F that can act as a molecular bridge via electrostatic force to enhance the intermolecular stacking of BDT-based polymer donors toward efficient and stable organic solar cells. Molecular dynamics simulations and synchrotron X-ray measurements reveal that the electronegative INMB-F adsorb on the electropositive main chain of polymer donors to increase the donor-donor interactions, leading to enhanced structural order with shortened π-π stacking distance and consequently enhanced charge transport ability. Casting the non-fullerene acceptor layer on top of the INMB-F modified donor layer to fabricate solar cells via layer-by-layer deposition evidences significant power conversion efficiency boosts in a range of photovoltaic systems. A power conversion efficiency of 19.4% (certified 18.96%) is realized in PM6/L8-BO binary devices, which is one of the highest reported efficiencies of this material system. The enhanced structural order of polymer donors by INMB-F also leads to a six-fold enhancement of the operational stability of PM6/L8-BO organic solar cells.

Ultra Robust and Highly Efficient Flexible Organic Solar Cells with Over 18 % Efficiency Realized by Incorporating a Linker Dimerized Acceptor

The wearable application of flexible organic solar cells (f-OSCs) necessitates high power conversion efficiency (PCE) and mechanical robustness. However, photoactive films based on efficient non-fullerene small molecule acceptors (NF-SMAs) are typically brittle, leading to poor mechanical stability in devices. In this study, we achieved a remarkable PCE of 18.06 % in f-OSCs while maintaining ultrahigh mechanical robustness (with a crack-onset strain (COS) of higher than 11 %) by incorporating a linker dimerized acceptor (DOY-TVT). Compared to binary blends, ternary systems exhibit reduced non-radiative recombination, suppressed crystallization and diffusion of NF-SMAs, and improved load distribution across the chain networks, enabling the dissipation of the load energy. Thus, the ternary f-OSCs developed in this study achieved, high PCE and stability, surpassing binary OSCs. Moreover, the developed f-OSCs retained 97 % of the initial PCE even after 3000 bending cycles, indicating excellent mechanical stability (9.1 % higher than binary systems). Furthermore, the rigid device with inverted structure based on the optimal active layer exhibited a substantial increase in efficiency retention, with 89.6 % after 865 h at 85 °C and 93 % after more than 1300 h of shelf storage at 25 °C. These findings highlight the potential of the linker oligomer acceptor for realizing high-performing f-OSCs with ultrahigh mechanical robustness.

Concretized structural evolution supported assembly-controlled film-forming kinetics in slot-die coated organic photovoltaics

Bulk-heterojunction structured small-area organic solar cells are approaching 20% power conversion efficiency, but the blurred film-forming kinetics in the fabrication of large-area devices causes significant PCE loss and restrains the potential of commercialization. Such blurring came from insufficient knowledge of structural evolution during the film-forming process. Here, we concretize the evolution process with structures detailed to the submolecular level by comprehensive investigations of in-situ UV-vis spectroscopy, Atomic Force Microscope, Grazing Incident Wide Angle X-ray Scattering, and molecular dynamic simulation. With such hierarchical structural knowledge, assembly-controlled film-forming kinetics is proposed to explain the whole picture. Such assembly is determined by molecule configuration and can be tuned via external conditions. Understanding this kinetics will contribute to screening large-area device fabrication conditions, and the detailed structural knowledge could inspire the future design of novel photovoltaic materials that are intrinsically excellent in large-area device fabrications.

A polymer library enables the rapid identification of a highly scalable and efficient donor material for organic solar cells

The dramatic improvement of the PCE (power conversion efficiency) of organic photovoltaic devices in the past few years has been driven by the development of new polymer donor materials and non-fullerene acceptors (NFAs). In the design of such materials synthetic scalability is often not considered, and hence complicated synthetic protocols are typical for high-performing materials. Here we report an approach to readily introduce a variety of solubilizing groups into a benzo[c][1,2,5]thiadiazole acceptor comonomer. This allowed for the ready preparation of a library of eleven donor polymers of varying side chains and comonomers, which facilitated a rapid screening of properties and photovoltaic device performance. Donor FO6-T emerged as the optimal material, exhibiting good solubility in chlorinated and non-chlorinated solvents and achieving 15.4% PCE with L8BO as the acceptor (15.2% with Y6) and good device stability. FO6-T was readily prepared on the gram scale, and synthetic complexity (SC) analysis highlighted FO6-T as an attractive donor polymer for potential large scale applications.

Design of Furan-Based Acceptors for Organic Photovoltaics

We explore a series of furan-based non-fullerene acceptors and report their optoelectronic properties, solid-state packing, photodegradation mechanism and application in photovoltaic devices. Incorporating furan building blocks leads to the expected enhanced backbone planarity, reduced band gap and red-shifted absorption of these acceptors. Still, their position in the molecule is critical for stability and device performance. We found that the photodegradation of these acceptors originates from two distinct pathways: electrocyclic photoisomerization and Diels-Alder cycloaddition of singlet oxygen. These mechanisms are of general significance to most non-fullerene acceptors, and the photostability depends strongly on the molecular structure. Placement of furans next to the acceptor termini leads to better photostability, well-balanced hole/electron transport, and significantly improved device performance. Methylfuran as the linker offers the best photostability and power conversion efficiency (>14 %), outperforming all furan-based acceptors reported to date and all indacenodithiophene-based acceptors. Our findings show the possibility of photostable furan-based alternatives to the currently omnipresent thiophene-based photovoltaic materials.

Green-Processed Non-Fullerene Organic Solar Cells Based on Y-Series Acceptors

The development of environmentally friendly and sustainable processes for the production of high-performance organic solar cells (OSCs) has become a critical research area. Currently, Y-series electron acceptors are widely used in high-performance OSCs, achieving power conversion efficiencies above 19%. However, these acceptors have large fused conjugated backbones that are well-soluble in halogenated solvents, such as chloroform and chlorobenzene, but have poor solubility in non-halogenated green solvents. To overcome this challenge, recent studies have focused on developing green-processed OSCs that use non-chlorinated and non-aromatic solvents to dissolve bulk-heterojunction photoactive layers based on Y-series electron acceptors, enabling environmentally friendly fabrication. In this comprehensive review, an overview of recent progress in green-processed OSCs based on Y-series acceptors is provided, covering the determination of Hansen solubility parameters, the use of non-chlorinated solvents, and the dispersion of conjugated nanoparticles in water/alcohol. It is hoped that the timely review will inspire researchers to develop new ideas and approaches in this important field, ultimately leading to the practical application of OSCs.

Eliminating the Imbalanced Mobility Bottlenecks via Reshaping Internal Potential Distribution in Organic Photovoltaics

The imbalanced carrier mobility remains a bottleneck for performance breakthrough in even those organic solar cells (OSCs) with recorded power conversion efficiencies (PCEs). Herein, a counter electrode doping strategy is proposed to reshape the internal potential distribution, which targets to extract the low mobility carriers at far end. Device simulations reveal that the key of this strategy is to partially dope the active layer with a certain depth, therefore it strengthens the electric field for low mobility carriers near counter electrode region while avoids zeroing the electric field near collection electrode region. Taking advantage of these, PCE enhancements are obtained from 15.4% to 16.2% and from 16.9% to 18.0%, respectively, via cathode p-doping and anode n-doping. Extending its application from opaque to semitransparent devices, the PCE of dilute cell rises from 10.5% to 12.1%, with a high light utilization efficiency (LUE) of 3.5%. The findings provide practical solutions to the core device physical problem in OSCs.

A Polycrystalline Polymer Donor as Pre-Aggregate toward Ordered Molecular Aggregation for 19.3% Efficiency Binary Organic Solar Cells

Organic semiconductors are generally featured with low structure order in solid-state films, which leads to low charge-transport mobility and strong charge recombination in their photovoltaic devices. In this work, a "polycrystal-induced aggregation" strategy orders the polymer donor (PM6) and non-fullerene acceptor (L8-BO) molecules during solution casting with the assistance of PM6 polycrystals that are incubated through a vapor diffusion method, toward improved solar cell efficiency with either thin or thick photoactive layers. These PM6 polycrystals are redissolved in chloroform to prepare PM6 pre-aggregates (PM6-PA), and further incorporated into the conventional PM6:L8-BO blend solutions, which is found to prolong the molecular organization process and enhance the aggregation of both the PM6 and the L8-BO components. As the results, with the assistance of 10% PM6-PA, PM6:L8-BO solar cell devices obtain power conversion efficiencies (PCEs) from 18.0% and 16.2% to 19.3% and 17.2% with a 100 nm-thick and 300 nm-thick photoactive layer, respectively.

Ternary Organic Solar Cells with Power Conversion Efficiency Approaching 15% by Fine-Selecting the Third Component

Nonfullerene acceptors with mediate bandgap play a crucial role in ternary devices as the third component, further boosting the performance of organic solar cells (OSCs). Herein, three F-series acceptors (F-H, F-Cl, and F-2Cl) with mediate bandgap are selected and introduced into the PM6:BDT-Br binary system as third component to find the detailed influence of end groups with chlorine (Cl) atom substitution on the performance of ternary organic solar cells. Due to the increased substitution of Cl atoms on the end groups, F-Cl and F-2Cl as guest acceptors reveal a superior ability to regulate the morphology of blend films, contributing to the ordered packing properties and high crystallinity. As a result, F-Cl and F-2Cl based ternary OSCs achieve significantly improved PCEs of 13.89% and 14.67%, respectively, compared with the binary devices (12.70%). On the contrary, F-H without Cl atom displays a poor compatibility with the host system, resulting in an inferior ternary device with a low PCE of 10.79%. This work indicates that F-series acceptors with mediate bandgap are a promising class of third component for high-performance ternary OSCs. And introducing more Cl atoms substitution on the end groups, especially F-2Cl, will own a broad applicability for other binary devices.

Thermal-Induced Performance Decay of the State-of-the-Art Polymer: Non-Fullerene Solar Cells and the Method of Suppression

Improving thermal stability is of great importance for the industrialization of polymer solar cells (PSC). In this paper, we systematically investigated the high-temperature thermal annealing effect on the device performance of the state-of-the-art polymer:non-fullerene (PM6:Y6) solar cells with an inverted structure. Results revealed that the overall performance decay (19% decrease) was mainly due to the fast open-circuit voltage (VOC, 10% decrease) and fill factor (FF, 10% decrease) decays whereas short circuit current (JSC) was relatively stable upon annealing at 150 °C (0.5% decrease). Pre-annealing on the ZnO/PM6:Y6 at 150 °C before the completion of cell fabrication resulted in a 1.7% performance decrease, while annealing on the ZnO/PM6:Y6/MoO3 films led to a 10.5% performance decay, indicating that the degradation at the PM6:Y6/MoO3 interface is the main reason for the overall performance decay. The increased ideality factor and reduced built-in potential confirmed by dark J - V curve analysis further confirmed the increased interfacial charge recombination after thermal annealing. The interaction of PM6:Y6 and MoO3 was proved by UV-Vis absorption and XPS measurements. Such deep chemical doping of PM6:Y6 led to unfavorable band alignment at the interface, which led to increased surface charge recombination and reduced built-in potential of the cells after thermal annealing. Inserting a thin C60 layer between the PM6:Y6 and MoO3 significantly improved the cells' thermal stability, and less than 2% decay was measured for the optimized cell with 3 nm C60.

High-Performance Nonfused Electron Acceptor with Precisely Controlled Side Chain Fluorination

Modification of the molecular packing of nonfullerene acceptors through fluorination represents one of the most promising strategies to achieve highly efficient organic solar cells (OSCs). In this work, three nonfused electron acceptors, namely, DTCBT-Fx (x = 0, 5, 9) with precisely controlled amounts of fluorine atoms in the side chains are designed and synthesized, and the effect of side chain fluorination is systematically studied. The results demonstrate that the light absorption, energy levels, molecular ordering, and film morphology could be effectively tuned by precisely controlling the side chain fluorination. DTCBT-F5 with an appropriate fluorine functionalization exhibits suitable miscibility with the donor polymer (PM6), leading to diminished charge recombination and improved charge carrier mobility. Consequently, a promising power conversion efficiency of 12.7% was obtained for DTCBT-F5-based solar cells, which outperforms those OSCs based on DTCBT-F0 (11.4%) and DTCBT-F9 (11.6%), respectively. This work demonstrates that precise control of the fluorine functionalization in side chains of nonfused electron acceptors is an effective strategy for realizing highly efficient OSCs.

Ternary Organic Solar Cells by Small Amount of Efficient Light Absorption Polymer PSEHTT as Third Component Materials

We prepared ternary organic solar cells (OSCs) by incorporating the medium wavelength absorption polymer PSEHTT into the PM6:L8-BO binary system. The power conversion efficiency (PCE) is improved from 15.83% to 16.66%. Although the fill factor (FF) is slightly reduced, the short-circuit current density (JSC) and open-circuit voltage (VOC) are significantly increased at the same time. A small amount of PSEHTT has a broad absorption spectrum in the short wavelength region and has good compatibility with PM6, which is conducive to fine-tuning the photon collection and improving the JSC. In addition, the highest occupied molecular orbital (HOMO) energy level of PSEHTT is deeper than that of PM6, which broadens the optical bandgap. This study provides an effective method to fabricate high-performance ternary OSCs by using a lower concentration of PSEHTT with PM6 as a hybrid donor material, which ensures a better surface and bulk morphology, improves photon collection, and broadens the optical bandgap.

A polymer donor based on difluoro-quinoxaline with a naphthalimide substituent unit exhibits a low-lying HOMO level for efficient non-fullerene polymer solar cells

The design and synthesis of polymer donors with a low-lying highest occupied molecular orbital (HOMO) level are crucial for increasing open-circuit voltages (VOC) and achieving high-performance non-fullerene polymer solar cells. Here, we developed two copolymers using non-fluorinated or fluorinated thienyl-conjugated benzodithiophenes as electron donor units, and difluoro-quinoxaline with a naphthalimide substituent (DNB) as the electron acceptor unit. These copolymers, namely PDNB and PDNB-2F, exhibited deep HOMO levels owing to the strong electron-withdrawing ability of the naphthalimide substituent. Density-functional theory calculations demonstrated that the skeletons of the two copolymers featured good coplanarity. Owing to the fluorination, PDNB-2F displayed an increased absorption coefficient and deeper HOMO level than PDNB. Moreover, the blended film based on PDNB-2F:Y6 demonstrated enhanced carrier mobility, decreased bimolecular recombination as well as favorable phase-separation regions. Consequently, the PDNB-2F:Y6-based device yielded a superior power conversion efficiency (PCE) of 12.18%, whereas the device based on PDNB:Y6 showed a comparatively lower PCE of 8.83%. These results indicate that difluoro-quinoxaline with a naphthalimide substituent is a prospective electron-deficient building block to develop donor polymers with low-lying HOMO levels to achieve efficient non-fullerene polymer solar cells.

Benzotriazole-Based 3D Four-Arm Small Molecules Enable 19.1 % Efficiency for PM6 : Y6-Based Ternary Organic Solar Cells

A third component featuring a planar backbone structure similar to the binary host molecule has been the preferred ingredient for improving the photovoltaic performance of ternary organic solar cells (OSCs). In this work, we explored a new avenue that introduces 3D-structured molecules as guest acceptors. Spirobifluorene (SF) is chosen as the core to combine with three different terminal-modified (rhodanine, thiazolidinedione, and dicyano-substituted rhodanine) benzotriazole (BTA) units, affording three four-arm molecules, SF-BTA1, SF-BTA2, and SF-BTA3, respectively. After adding these three materials to the classical system PM6 : Y6, the resulting ternary devices obtained ultra-high power-conversion efficiencies (PCEs) of 19.1 %, 18.7 %, and 18.8 %, respectively, compared with the binary OSCs (PCE=17.4 %). SF-BTA1-3 can work as energy donors to increase charge generation via energy transfer. In addition, the charge transfer between PM6 and SF-BTA1-3 also acts to enhance charge generation. Introducing SF-BTA1-3 could form acceptor alloys to modify the molecular energy level and inhibit the self-aggregation of Y6, thereby reducing energy loss and balancing charge transport. Our success in 3D multi-arm materials as the third component shows good universality and brings a new perspective. The further functional development of multi-arm materials could make OSCs more stable and efficient.

Regulating the Sequence Structure of Conjugated Block Copolymers Enables Large-Area Single-Component Organic Solar Cells with High Efficiency and Stability

Single-component organic solar cells (SCOSCs) based on conjugated block copolymers (CBCs) by covalently bonding a polymer donor and polymer acceptor become more and more appealing due to the formation of a favorable and stable morphology. Unfortunately, a deep understanding of the effect of the assembly behavior caused by the sequence structure of CBCs on the device performance is still missing. Herein, from the aspect of manipulating the sequence length and distribution regularity of CBCs, we synthesized a series of new CBCs, namely D18(20)-b-PYIT, D18(40)-b-PYIT and D18(60)-b-PYIT by two-pot polymerization, and D18(40)-b-PYIT(r) by traditional one-pot method. It is observed that precise manipulation of sequence length and distribution regularity of the polymer blocks fine-tunes the self-assembly of the CBCs, optimizes film morphology, improves optoelectronic properties, and reduces energy loss, leading to simultaneously improved efficiency and stability. Among these CBCs, the D18(40)-b-PYIT-based device achieves a high efficiency of 13.4 % with enhanced stability, which is an outstanding performance among SCOSCs. Importantly, the regular sequence distribution and suitable sequence length of the CBCs enable a facile film-forming process of the printed device. For the first time, the blade-coated large-area rigid/flexible SCOSCs are fabricated, delivering an impressive efficiency of 11.62 %/10.73 %, much higher than their corresponding binary devices.

Incorporating Naphthalene and Halogen into Near-Infrared Double-Cable Conjugated Polymers for Single-Component Organic Solar Cells with Low-Voltage Losses

The invention of near-infrared pedant-based double-cable conjugated polymers has demonstrated remarkable efficacy in single-component organic solar cells (SCOSCs). This work focuses on the innovative double-cable conjugated polymers aimed at attaining good absorption and suitable energy levels. Specifically, in the aromatic side units, the electron-donating (D) part is designed using a thieno[3,4-c]pyrrole-4,6-dione (TPD) as a core unit, flanked by two cyclopentadithiophene groups on either side. The electron-deficient (A) terminal groups consist of 2-(3-oxo-2,3-dihydro-1H-cyclopenta[b]naphthalen-1-ylidene) malononitrile (NC), which can be further modified through fluorination to modulate the physical properties and packing modes of the acceptor material. The resulting double-cable conjugated polymers exhibit broad absorption spectra spanning 500-850 nm and possess lowered Frontier energy levels when incorporating fluorine elements, providing decreased voltage losses in SCOSCs. Therefore, SCOSCs fabricated using these polymers have demonstrated power conversion efficiencies ranging from 7.6 to 10.2%, in which fluorine-containing double-cable conjugated polymers showed higher PCEs due to more favorable crystalline packing, enhanced exciton dissociation probability, and charge-transporting ability.

Going ballistic: a novel characterization for the electronic energy gap

The energy gap of molecular semiconductors is a critical parameter in molecule-based devices because it fundamentally determines the operating principle and device performance, such as the charge transfer driving force. Hence, an accurate quantification of the energy gap of a molecular semiconductor is essential. The hot electron technique, which is implemented using a hot electron transistor and ballistic electron emission microscope, has been verified as the most powerful characterization in recent years. By monitoring the charge transport on the metal/molecule interface, an electron-injection barrier (or LUMO) and hole-injection barrier (or HOMO) can be achieved, which contributes to the electronic energy gap determination. In this review, a comprehensive comparison of these two techniques was made. It helps us to select a suitable method in specific situations and provides a profound comprehension of the charge transport process in molecular semiconductor and molecule-based devices.

Terminally Chlorinated and Thiophene-linked Acceptor-Donor-Acceptor Structured 3D Acceptors with Versatile Processability for High-efficiency Organic Solar Cells

To exploit the potential of our newly developed three-dimensional (3D) dimerized acceptors, a series of chlorinated 3D acceptors (namely CH8-3/4/5) were reported by precisely tuning the position of chlorine (Cl) atom. The introduction of Cl atom in central unit affects the molecular conformation. Whereas, by replacing fluorinated terminal groups (CH8-3) with chlorinated terminal groups (CH8-4 and CH8-5), the red-shift absorption and enhanced crystallization are achieved. Benefiting from these, all devices received promising power conversion efficiencies (PCEs) over 16 % as well as decent thermal/photo-stabilities. Among them, PM6:CH8-4 based device yielded a best PCE of 17.58 %. Besides, the 3D merits with multi alkyl chains enable their versatile processability during the device preparation. Impressive PCEs of 17.27 % and 16.23 % could be achieved for non-halogen solvent processable devices prepared in glovebox and ambient, respectively. 2.88 cm2 modules also obtained PCEs over 13 % via spin-coating and blade-coating methods, respectively. These results are among the best performance of dimerized acceptors. The decent performance of CH8-4 on small-area devices, modules and non-halogen solvent-processed devices highlights the versatile processing capability of our 3D acceptors, as well as their potential applications in the future.

Study of Tunable Dielectric Permittivity of PBDB-T-2CL Polymer in Ternary Organic Blend Thin Films Using Spectroscopic Ellipsometry

The ellipsometric analyses reported in this paper present a novelty by bringing an in-depth optical investigation of some ternary organic blends. This study focuses on the tunability and control of the relative permittivity of active layers by varying the weight ratio of blended materials spin-coated as thin films. To investigate this, an extensive approach based on spectroscopic ellipsometry was conducted on ternary blend (D:A1:A2) thin films, involving a donor [D = chlorinated conjugated polymer (PBDB-T-2Cl)] and two acceptor materials [A1 = a non-fullerene (ITIC-F) and A2 = a fullerene (PCBM)]. The refractive index constitutes a key parameter that exposes insights into the feasibility of photovoltaic cells by predicting the trajectory of light as it transits the device. In this term, higher obtained refractive indexes support higher absorption coefficients. Notably, the dielectric constant can be rigorously tuned and finely calibrated by modest variations in the quantity of the third element, resulting in considerable modifications. Moreover, the inclusion of fullerene in blends, as the third element, results in a smooth topographical profile, further refining the surface of the film. From an electrical point of view, the ternary blends outperform the polymer thin films. The synergistic interaction of constituents emphasizes their potential to enhance solar conversion devices.

Reexamining the Role of Solution-Cast Ferroelectric Polymer Interlayer toward Enhanced Efficiency and Stability in Conventional Organic Solar Cells

Interfacial modification is crucial for achieving efficient and stable organic solar cells (OSCs). Herein, an N,N-dimethylformamide (DMF) solution-cast poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) interlayer was applied to enhance the efficiency and stability of a range of OSCs, and the underlying mechanism was revealed via morphological and device physics studies. DMF rinse during the P(VDF-TrFE) interlayer casting process strengthens π-π stacking of the active layer with fibril aggregation, optimized phase separation, and vertical component distribution, while the P(VDF-TrFE) interlayer with rich diploes contributes to increased surface potential and internal electric field. The synergistic effect of the P(VDF-TrFE) interlayer and DMF rinse increases the PCEs of PM6:IT-4F, PM6:C5-16, and PM6:L8-BO OSCs from 12.7, 17.9, and 18.2% to 13.1, 18.7, and 18.8%, respectively. Additionally, OSCs containing the P(VDF-TrFE) interlayer also showed improved storage stability.

Trifluoromethylation in the Design and Synthesis of High-Performance Wide Bandgap Polymer Donors for Quasiplanar Heterojunction Organic Solar Cells

New strategies for the molecular design to construct efficient electron-deficient units for D-A-type donor copolymers are urgently needed. Halogenation of electron-deficient units (A) has been shown to be the most effective strategy reported to date with which to produce high-performance donor polymers. Herein, we have constructed two different trifluoromethyl-substituted polymer donors, PBQP-CF3 and PBQ-CF3. The trifluoromethylation process typically involves complex protocols, which are not widely used in the synthesis of polymer donors. Accordingly, we have developed a single-step, one-pot synthesis of the new trifluoromethyl-substituted electron-deficient unit (A) of PBQ-CF3. The strong electron-withdrawing ability of the trifluoromethyl group ensures deeper highest occupied molecular orbital (HOMO) energy levels, and the non-covalent bonding interactions of the fluorine atoms are beneficial to the regulation of aggregation properties. Thus, both of the trifluoromethyl-substituted polymer donors obtained much higher power conversion efficiency (PCE) than PBDP-H (6.66%). PBQ-CF3 exhibits a deeper HOMO energy level, better aggregation behavior, and higher hole mobility than PBQP-CF3. PBQ-CF3-based quasiplanar heterojunction (Q-PHJ) devices therefore achieve simultaneously enhanced open-circuit voltage (VOC), short-circuit current density (JSC), and fill factor (FF) and an impressive PCE (16.02%), which is much higher than that obtained by PBQP-CF3-based devices (12.57%). This work reveals a promising path to synthesis of the trifluoromethylation polymer donors and demonstrates that the trifluoromethylation strategy can be used to enhance the photovoltaic performance.

The State-of-the-Art Solution-Processed Single Component Organic Photodetectors Achieved by Strong Quenching of Intermolecular Emissive State and High Quadrupole Moment in Non-Fullerene Acceptors

A bulk-heterojunction (BHJ) blend is commonly used as the photoactive layer in organic photodetectors (OPDs) to utilize the donor (D)/acceptor (A) interfacial energetic offset for exciton dissociation. However, this strategy often complicates optimization procedures, raising serious concerns over device processability, reproducibility, and stability. Herein, highly efficient OPDs fabricated with single-component organic semiconductors are demonstrated via solution-processing. The non-fullerene acceptors (NFAs) with strong intrinsic D/A character are used as the photoactive layer, where the emissive intermolecular charge transfer excitonic (CTE) states are formed within <1 ps, and efficient photocurrent generation is achieved via strong quenching of these CTE states by reverse bias. Y6 and IT-4F-based OPDs show excellent OPD performances, low dark current density (≈10-9 A cm-2 ), high responsivity (≥0.15 A W-1 ), high specific detectivity (>1012 Jones), and fast photo-response time (<10 µs), comparable to the state-of-the-art BHJ OPDs. Together with strong CTE state quenching by electric field, these excellent OPD performances are also attributed to the high quadrupole moments of NFA molecules, which can lead to large interfacial energetic offset for efficient CTE dissociation. This work opens a new way to realize efficient OPDs using single-component systems via solution-processing and provides important molecular design rules.

Unidirectional Sidechain Engineering to Construct Dual-Asymmetric Acceptors for 19.23 % Efficiency Organic Solar Cells with Low Energy Loss and Efficient Charge Transfer

Achieving both high open-circuit voltage (Voc ) and short-circuit current density (Jsc ) to boost power-conversion efficiency (PCE) is a major challenge for organic solar cells (OSCs), wherein high energy loss (Eloss ) and inefficient charge transfer usually take place. Here, three new Y-series acceptors of mono-asymmetric asy-YC11 and dual-asymmetric bi-asy-YC9 and bi-asy-YC12 are developed. They share the same asymmetric D1 AD2 (D1 =thieno[3,2-b]thiophene and D2 =selenopheno[3,2-b]thiophene) fused-core but have different unidirectional sidechain on D1 side, allowing fine-tuned molecular properties, such as intermolecular interaction, packing pattern, and crystallinity. Among the binary blends, the PM6 : bi-asy-YC12 one has better morphology with appropriate phase separation and higher order packing than the PM6 : asy-YC9 and PM6 : bi-asy-YC11 ones. Therefore, the PM6 : bi-asy-YC12-based OSCs offer a higher PCE of 17.16 % with both high Voc and Jsc , due to the reduced Eloss and efficient charge transfer properties. Inspired by the high Voc and strong NIR-absorption, bi-asy-YC12 is introduced into efficient binary PM6 : L8-BO to construct ternary OSCs. Thanks to the broadened absorption, optimized morphology, and furtherly minimized Eloss , the PM6 : L8-BO : bi-asy-YC12-based OSCs achieve a champion PCE of 19.23 %, which is one of the highest efficiencies among these annealing-free devices. Our developed unidirectional sidechain engineering for constructing bi-asymmetric Y-series acceptors provides an approach to boost PCE of OSCs.

A 3-Fluoropyridine Manipulating the Aggregation and Fibril Network of Donor Polymers for Eco-Friendly Solution-Processed Versatile Organic Solar Cells

The development of eco-friendly solvent-processed organic solar cells (OSCs) suitable for industrial-scale production should be now considered the imperative research. Herein, asymmetric 3-fluoropyridine (FPy) unit is used to control the aggregation and fibril network of polymer blends. Notably, terpolymer PM6(FPy = 0.2) incorporating 20% FPy in a well-known donor polymer poly[(2,6-(4,8-bis(5-(2-ethylhexyl-3-fluoro)thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione)] (PM6) can reduce the regioregularity of the polymer backbone and endow them with much-enhanced solubility in eco-friendly solvents. Accordingly, the excellent adaptability for fabricating versatile devices based on PM6(FPy = 0.2) by toluene processing is demonstrated. The resulting OSCs exhibit a high power conversion efficiency (PCE) of 16.1% (17.0% by processed with chloroform) and low batch-to-batch variation. Moreover, by controlling the donor-to-acceptor weight ratio at 0.5:1.0 and 0.25:1.0, semi-transparent OSCs (ST-OSCs) yield significant light utilization efficiencies of 3.61% and 3.67%, respectively. For large-area (1.0 cm2 ) indoor OSC (I-OSC), a high PCE of 20.6% is achieved with an appropriate energy loss of 0.61 eV under a warm white light-emitting diode (3,000 K) with the illumination of 958 lux. Finally, the long-term stability of the devices is evaluated by investigating their structure-performance-stability relationship. This work provides an effective approach to realizing eco-friendly, efficient, and stable OSCs/ST-OSCs/I-OSCs.

Double-Dipole Induced by Incorporating Nitrogen-Bromine Hybrid Cathode Interlayers Leads to Suppressed Current Leakage and Enhanced Charge Extraction in Non-Fullerene Organic Solar Cells

The cathode interlayer plays a vital role in organic solar cells, which can modify the work function of electrodes, lower the electron extraction barriers, smooth the surface of the active layer, and remove solvent residuals. However, the development of organic cathode interlayer lags behind the rapidly improved organic solar cells because their intrinsic high surface tension can lead to poor contact with the active layers. Herein, a double-dipole strategy is proposed to enhance the properties of organic cathode interlayers, which is induced by incorporating nitrogen- and bromine-containing interlayer materials. To verify this approach, the state-of-the-art active layer composed of PM6:Y6 and two prototypical cathode interlayer materials, PDIN and PFN-Br is selected. Using the cathode interlayer PDIN: PFN-Br (0.9:0.1, in wt.%) in the devices can reduce the electrode work function, suppress the dark current leakage, and improve charge extractions, leading to enhanced short circuit current density and fill factor. The bromine ions tend to break from PFN-Br and form a new chemical bond with the silver electrode, which can adsorb extra dipoles directed from the interlayer to silver. These findings on the double-dipole strategy provide insights into the hybrid cathode interlayers for efficient non-fullerene organic solar cells.

Understanding and Suppressing Non-Radiative Recombination Losses in Non-Fullerene Organic Solar Cells

Organic solar cells benefit from non-fullerene acceptors (NFA) due to their high absorption coefficients, tunable frontier energy levels, and optical gaps, as well as their relatively high luminescence quantum efficiencies as compared to fullerenes. Those merits result in high yields of charge generation at a low or negligible energetic offset at the donor/NFA heterojunction, with efficiencies over 19% achieved for single-junction devices. Pushing this value significantly over 20% requires an increase in open-circuit voltage, which is currently still well below the thermodynamic limit. This can only be achieved by reducing non-radiative recombination, and hereby increasing the electroluminescence quantum efficiency of the photo-active layer. Here, current understanding of the origin of non-radiative decay, as well as an accurate quantification of the associated voltage losses are summarized. Promising strategies for suppressing these losses are highlighted, with focus on new material design, optimization of donor-acceptor combination, and blend morphology. This review aims at guiding researchers in their quest to find future solar harvesting donor-acceptor blends, which combine a high yield of exciton dissociation with a high yield of radiative free carrier recombination and low voltage losses, hereby closing the efficiency gap with inorganic and perovskite photovoltaics.

Vertical Phase Regulation with 1,3,5-Tribromobenzene Leads to 18.5% Efficiency Binary Organic Solar Cells

The sequential deposition method assists the vertical phase distribution in the photoactive layer of organic solar cells, enhancing power conversion efficiencies. With this film coating approach, the morphology of both layers can be fine-tuned with high boiling solvent additives, as frequently applied in one-step casting films. However, introducing liquid additives can compromise the morphological stability of the devices due to the solvent residuals. Herein, 1,3,5-tribromobenzene (TBB) with high volatility and low cost, is used as a solid additive in the acceptor solution and combined thermal annealing to regulate the vertical phase in organic solar cells composed of D18-Cl/L8-BO. Compared to the control cells, the devices treated with TBB and those that underwent additional thermal processing exhibit increased exciton generation rate, charge carrier mobility, charge carrier lifetime, and reduced bimolecular charge recombination. As a result, the TBB-treated organic solar cells achieve a champion power conversion efficiency of 18.5% (18.1% averaged), one of the highest efficiencies in binary organic solar cells with open circuit voltage exceeding 900 mV. This study ascribes the advanced device performance to the gradient-distributed donor-acceptor concentrations in the vertical direction. The findings provide guidelines for optimizing the morphology of the sequentially deposited top layer to achieve high-performance organic solar cells.

Enabling Highly Efficient and Thermal-Stable Polymer Solar Cells through Semi-Alloy Acceptors Composed of a Hinge-Like Dimer: A Versatile Doping Protocol

The simultaneous improvement of power conversion efficiency (PCE) and thermal stability is a critical scientific challenge in advancing the commercial applications of polymer solar cells. To address this challenge, a dumbbell-shaped dimeric acceptor, DT19, is successfully designed and synthesized. It is incorporated as a third component into the PM1:BTP-eC9 system. This ternary strategy demonstrates a synergistic enhancement of the PCE and thermal stability of the host binary system. In particular, the PM1:BTP-eC9:DT19 system maintains a PCE of over 90% even after heating at 120 °C for 200 h. Additionally, the dimer-doping ternary strategy exhibits excellent generality for the other four Y-series systems and outperforms ternary systems containing alloy-like acceptors in terms of thermal stability. It is because DT19, with its hinge-like structure, can form a semi-alloy acceptor with the host acceptor, leading to strong interchain entanglement with the polymer donor, thus overcoming phase separation and excessive aggregation under thermal stress. This new type of dimeric material, which can synergistically enhance the device efficiency and thermal stability of active layers, presents promising application prospects.

Robust and Sustainable Indium Anode Leading to Efficient and Stable Organic Solar Cells

The fast degradation of the charge-extraction interface at indium tin oxide (ITO) poses a significant obstacle to achieving long-term stability for organic solar cells (OSCs). Herein, a sustainable approach for recycling non-sustainable indium to construct efficient and stable OSCs and scale-up modules is developed. It is revealed that the recovered indium chloride (InCl3 ) from indium oxide waste can be applied as an effective hole-selective interfacial layer for the ITO electrode (noted as InCl3 -ITO anode) through simple aqueous fabrication, facilitating not only energy level alignment to photoactive blends but also mitigating parasitic absorption and charge recombination losses of the corresponding OSCs. As a result, OSCs and modules consisting of InCl3 -ITO anodes achieve remarkable power conversion efficiencies (PCEs) of 18.92% and 15.20% (active area of 18.73 cm2 ), respectively. More importantly, the InCl3 -ITO anode can significantly extend the thermal stability of derived OSCs, with an extrapolated T80 lifetime of ≈10 000 h.

Impact of Electrostatic Interaction on Non-radiative Recombination Energy Losses in Organic Solar Cells Based on Asymmetric Acceptors

Reducing non-radiative recombination energy loss (ΔE3 ) is one key to boosting the efficiency of organic solar cells. Although the recent studies have indicated that the Y-series asymmetric acceptors-based devices featured relatively low ΔE3 , the understanding of the energy loss mechanism derived from molecular structure change is still lagging behind. Herein, two asymmetric acceptors named BTP-Cl and BTP-2Cl with different terminals were synthesized to make a clear comparative study with the symmetric acceptor BTP-0Cl. Our results suggest that asymmetric acceptors exhibit a larger difference of electrostatic potential (ESP) in terminals and semi-molecular dipole moment, which contributes to form a stronger π-π interaction. Besides, the experimental and theoretical studies reveal that a lower ESP-induced intermolecular interaction can reduce the distribution of PM6 near the interface to enhance the built-in potential and decrease the charge transfer state ratio for asymmetric acceptors. Therefore, the devices achieve a higher exciton dissociation efficiency and lower ΔE3 . This work establishes a structure-performance relationship and provides a new perspective to understand the state-of-the-art asymmetric acceptors.

Modular-Approach Synthesis of Giant Molecule Acceptors via Lewis-Acid-Catalyzed Knoevenagel Condensation for Stable Polymer Solar Cells

The operational stability of polymer solar cells is a critical concern with respect to the thermodynamic relaxation of acceptor-donor-acceptor (A-D-A) or A-DA'D-A structured small-molecule acceptors (SMAs) within their blends with polymer donors. Giant molecule acceptors (GMAs) bearing SMAs as subunits offer a solution to this issue, while their classical synthesis via the Stille coupling suffers from low reaction efficiency and difficulty in obtaining mono-brominated SMA, rendering the approach impractical for their large-scale and low-cost preparation. In this study, we present a simple and cost-effective solution to this challenge through Lewis acid-catalyzed Knoevenagel condensation with boron trifluoride etherate (BF3  ⋅ OEt2 ) as catalyst. We demonstrated that the coupling of the monoaldehyde-terminated A-D-CHO unit and the methylene-based A-link-A (or its silyl enol ether counterpart) substrates can be quantitatively achieved within 30 minutes in the presence of acetic anhydride, affording a variety of GMAs connected via the flexible and conjugated linkers. The photophysical properties was fully studied, yielding a high device efficiency of over 18 %. Our findings offer a promising alternative for the modular synthesis of GMAs with high yields, easier work up, and the widespread application of such methodology will undoubtedly accelerate the progress of stable polymer solar cells.