Supramolecular materials based on AIE luminogens (AIEgens): construction and applications

Conjugated Polymers with Aggregation-Induced Emission Characteristics for Fluorescence Imaging and Photodynamic Therapy

Accurate diagnosis and treatment have been extensively developed in the field of biomedicine, which put forward higher requirements for the development of biomedical materials with high efficiency and selectivity. Among them, conjugated polymers featuring aggregation-induced emission (AIE) characteristics (AIE conjugated polymers) have stood out in recent years owing to their unique properties, such as intense solid emission, high light-harvesting ability, efficient energy transfer, and high ¹ O₂ generation ability, which empower them with effective biomedical functions in fluorescence imaging (FLI), photodynamic therapy (PDT), FLI-guided PDT, two-photon excited photodynamic therapy (2PE-PDT), etc. In this review, we highlight recent progress in AIE conjugated polymers and their applications in anticancer and antibacterial areas based on FLI and PDT, and summarize the mechanism of color-tuned fluorescence emission and efficient ¹ O₂ generation ability. The challenges and perspectives for the future development of AIE conjugated polymers are also discussed.

Controllable FRET Behaviors of Supramolecular Host-Guest Systems as Ratiometric Aluminum Ion Sensors Manipulated by Tetraphenylethylene-Functionalized Macrocyclic Host Donor and Multistimuli-Responsive Fluorescein-Based Guest Acceptor

The novel multistimuli-responsive monofluorophoric supramolecular polymer Poly(TPE-DBC)/FL-DBA and pseudo[3]rotaxane TPE-DBC/FL-DBA consisted of the closed form of nonemissive fluorescein guest FL-DBA along with TPE-based main-chain macrocyclic polymer Poly(TPE-DBC) and TPE-functionalized macrocycle TPE-DBC hosts, respectively. By the combination of various external stimuli, these fluorescent supramolecular host-guest systems could reveal interesting photoluminescence (PL) properties in DMF/H₂O (1:1, v/v) solutions, including bifluorophoric host-guest systems after the complexation of Al³⁺ ion, i.e., TPE-DBC/FL-DBA-Al³⁺ and Poly(TPE-DBC)/FL-DBA-Al³⁺ with their corresponding open form of fluorescein guest FL-DBA-Al³⁺. Importantly, the Förster resonance energy transfer (FRET) processes occurred in both bifluorophoric host-guest systems between blue-emissive TPE donors (λ_em = 470 nm) and green-emissive fluorescein acceptors (λ_em = 527 nm) after aluminum detection, which were further verified by time-resolved photoluminescence (TRPL) measurements to acquire their FRET efficiencies of 40.4 and 31.1%, respectively. Both supramolecular host-guest systems exhibited stronger green fluorescein emissions as well as appealing ratiometric PL behaviors within the desirable donor-acceptor distances of FRET processes in comparison with their detached analogous mixtures. Regarding the pH effects, the optimum green fluorescein emissions with effective FRET processes of all compounds and host-guest systems were sustained in the range pH = 7-10. Interestingly, both host-guest systems TPE-DBC/FL-DBA and Poly(TPE-DBC)/FL-DBA possessed high sensitivities and selectivities toward aluminum ion to display their strong green emissions via FRET-ON behaviors due to the chelation-induced ring opening of spirolactam moieties to become green-emissive guest acceptor FL-DBA-Al³⁺, which offered excellent limit of detection (LOD) values of 50.61 and 38.59 nM, respectively, to be further applied for the fabrication of facile test strips toward aluminum detection. Accordingly, the inventive ratiometric PL and FRET sensor approaches of supramolecular host-guest systems toward aluminum ion with prominent sensitivities and selectivities were well-established in this study.

Nanoarchitectonics: what's coming next after nanotechnology?

In science and technology today, the crucial importance of the regulation of nanoscale objects and structures is well recognized. The production of functional material systems using nanoscale units can be achieved via the fusion of nanotechnology with the other research disciplines. This task is a part of the emerging concept of nanoarchitectonics, which is a concept moving beyond the area of nanotechnology. The concept of nanoarchitectonics is supposed to involve the architecting of functional materials using nanoscale units based on the principles of nanotechnology. In this focus article, the essences of nanotechnology and nanoarchitectonics are first explained, together with their historical backgrounds. Then, several examples of material production based on the concept of nanoarchitectonics are introduced via several approaches: (i) from atomic switches to neuromorphic networks; (ii) from atomic nanostructure control to environmental and energy applications; (iii) from interfacial processes to devices; and (iv) from biomolecular assemblies to life science. Finally, perspectives relating to the final goals of the nanoarchitectonics approach are discussed.

High-Performance Trichloroacetic Acid Sensor Based on the Intramolecular Hydrogen Bond Formation and Disruption of a Specially Designed Fluorescent o-Carborane Derivative in the Film State

Discriminative and sensitive detection of environmentally important and health-related trichloroacetic acid (TCA) suffers from various problems such as bulky instruments and time-consuming operation as well as complex sample processing. Herein, we present a rapid, sensitive, and specific method for the detection of gaseous TCA using a fluorescent single-molecule array. An o-carborane-based benzothiazole derivative (CB-BT-OCH₃) with specific fluorescence properties was specifically designed and utilized to fabricate a film-based single-molecule array. It was revealed that the fluorescent film is photochemically stable and extremely sensitive to TCA vapor, depicting an observable fluorescence color change from green to blue. The experimental detection limit is 0.2 ppm, which is lower than the safety limit (1 ppm) required by the threshold limit values and biological exposure indices. In addition, the film could show detectable intensity change within 0.2 s. On the basis of multiple signal responses, a conceptual two-channel-based fluorescent TCA sensor was developed. Importantly, the proposed conceptual sensor paves a new route to the development of specific fluorescent film-based sensor arrays with a single fluorophore as sensing units.

Stimuli responsive dynamic transformations in supramolecular gels

Supramolecular gels are formed by the self-assembly of small molecules under the influence of various non-covalent interactions. As the interactions are individually weak and reversible, it is possible to perturb the gels easily, which in turn enables fine tuning of their properties. Synthetic supramolecular gels are kinetically trapped and usually do not show time variable changes in material properties after formation. However, such materials potentially become switchable when exposed to external stimuli like temperature, pH, light, enzyme, redox, and chemical analytes resulting in reconfiguration of gel matrix into a different type of network. Such transformations allow gel-to-gel transitions while the changes in the molecular aggregation result in alteration of physical and chemical properties of the gel with time. Here, we discuss various methods that have been used to achieve gel-to-gel transitions by modifying a pre-formed gel material through external perturbation. We also describe methods that allow time-dependent autonomous switching of gels into different networks enabling synthesis of next generation functional materials. Dynamic modification of gels allows construction of an array of supramolecular gels with various properties from a single material which eventually extend the limit of applications of the gels. In some cases, gel-to-gel transitions lead to materials that cannot be accessed directly. Finally, we point out the necessity and possibility of further exploration of the field.

Efficient Photoinduced Energy and Electron Transfers in a Tetraphenylethene-Based Octacationic Cage Through Host-Guest Complexation

Artificial photofunctional systems with energy and electron transfer functions, inspired from photosynthesis in nature, have been developed for many promising applications including solar cell, biolabeling, photoelectric materials, and photodriven catalysis. Supramolecular hosts including macrocycles and cages have been explored for simulating photosynthesis based on a host-guest strategy. Herein, we report a host-guest approach by using a tetraphenylethene-based octacationic cage and fluorescent dyes to construct artificial photofunctional systems with energy and electron transfer functions. The cage traps various dyes within its hydrophobic cavity to form 1:1 host-guest complexes via CH-π, π-π, and/or electrostatic interactions in solution. The efficient energy transfer and ultrafast photoinduced electron transfer between the cage and dyes are competitive processes with each other in artificial photofunctional systems. Spectroscopic techniques that confirm energy transfer from the fluorescent cage to dyes (e.g., NiR, R700, and R800) are efficient, which induce the red shift of fluorescence. On the other hand, ultrafast photoinduced electron transfer from dyes (e.g., ICG, AG, and AV) to the fluorescent cage can induce fluorescence quenching. This study provides an insight into the construction of artificial photofunctional systems with energy and electron transfer functions via a host-guest approach in solution.

Modulation of Aggregation-Induced Emission by Excitation Energy Transfer: Design and Application

Excitation energy transfer (EET) as a fundamental photophysical process is well-explored for developing functional materials with tunable photophysical properties. Compared to traditional fluorophores, aggregation-induced emission luminogens (AIEgens) exhibit unique advantages for building EET systems, especially serving as energy donors, due to their outstanding photophysical properties such as bright fluorescence in aggregation state, broad absorption and emission spectra, large Stokes shift, and high photobleaching resistance. In addition, the photophysical properties of AIEgens can be modulated by energy transfer for improved luminescence performance. Therefore, a variety of EET systems based on AIEgens have been constructed and their applications in different areas have been explored. In this review, we summarize recent progress in the design strategy of AIE-based energy transfer systems for light-harvesting, fluorescent probes and theranostic systems, with an emphasis on design strategies to achieve desirable properties. The limitations, challenges and future opportunities of AIE-EET systems are briefly outlined. Design strategies and applications (light-harvesting, fluorescent probe and theranostics) of AIEgen-based excitation energy systems are discussed in this review.

Photoactivated nanomotors via aggregation induced emission for enhanced phototherapy

Aggregation-induced emission (AIE) has, since its discovery, become a valuable tool in the field of nanoscience. AIEgenic molecules, which display highly stable fluorescence in an assembled state, have applications in various biomedical fields—including photodynamic therapy. Engineering structure-inherent, AIEgenic nanomaterials with motile properties is, however, still an unexplored frontier in the evolution of this potent technology. Here, we present phototactic/phototherapeutic nanomotors where biodegradable block copolymers decorated with AIE motifs can transduce radiant energy into motion and enhance thermophoretic motility driven by an asymmetric Au nanoshell. The hybrid nanomotors can harness two photon near-infrared radiation, triggering autonomous propulsion and simultaneous phototherapeutic generation of reactive oxygen species. The potential of these nanomotors to be applied in photodynamic therapy is demonstrated in vitro, where near-infrared light directed motion and reactive oxygen species induction synergistically enhance efficacy with a high level of spatial control.

Induced motion has emerged as a method to increase the efficacy of delivery and therapeutic outcomes using nanomaterials. Here, the authors report on a Janus gold shell polymersome with aggregation-induced emission molecules for phototactic and photodynamic therapy applications.

Design and Development of Axially Chiral Bis(naphthofuran) Luminogens as Fluorescent Probes for Cell Imaging

Designing chiral AIEgens without aggregation-induced emission (AIE)-active molecules externally tagged to the chiral scaffold remains a long-standing challenge for the scientific community. The inherent aggregation-caused quenching phenomenon associated with the axially chiral (R)-[1,1'-binaphthalene]-2,2'-diol ((R)-BINOL) scaffold, together with its marginal Stokes shift, limits its application as a chiral AIE-active material. Here, in our effort to design chiral luminogens, we have developed a design strategy in which 2-substituted furans, when appropriately fused with the BINOL scaffold, will generate solid-state emissive materials with high thermal and photostability as well as colour-tunable properties. The excellent biocompatibility, together with the high fluorescence quantum yield and large Stokes shift, of one of the luminogens stimulated us to investigate its cell-imaging potential. The luminogen was observed to be well internalised and uniformly dispersed within the cytoplasm of MDA-MB-231 cancer cells, showing high fluorescence intensity.

Supramolecular gel formation regulated by water content in organic solvents: self-assembly mechanism and biomedical applications

As one of the most important and fruitful methods, supramolecular self-assembly has a significant advantage in designing and fabricating functional soft materials with various nanostructures. In this research, a low-molecular-weight gelator, N,N'-di(pyridin-4-yl)-pyridine-3,5-dicarboxamide (PDA-N4), was synthesized and used to construct self-assembled gels via a solvent-mediated strategy. It was found that PDA-N4 could form supramolecular gels in mixed solvents of water and DMSO (or DMF) at high water fraction (greater than or equal to 50%). By decreasing the water fraction from 50% to 30%, the gel, suspension and solution phases appeared successively, indicating that self-assembled aggregates could be efficiently modulated via water content in organic solvents. Moreover, the as-prepared PDA-N4 supramolecular gels not only displayed solid-like behavior, and pH- and thermo-reversible characteristics, but also showed a solution-gel-crystal transition with the extension of aging time. Further analyses suggested that both the crystal and gel had similar assembled structures. The intermolecular hydrogen bonding between amide groups and the π-π stacking interactions between pyridine groups played key roles in gel formation. Additionally, the release behavior of vitamin B12 (VB12) from PDA-N4 gel (H2O/DMSO, v/v = 90/10) was evaluated, and the drug controlled release process was consistent with a first-order release mechanism. The human umbilical venous endothelial cell culture results showed that the PDA-N4 xerogel has good cytocompatibility, which implied that the gels have potential biological application in tissue engineering and controlled drug release.

Aggregation-Induced Emission: From Small Molecules to Polymers-Historical Background, Mechanisms and Photophysics

The enhancement of photoluminescence through formation of molecular aggregates in organic oligomers and conjugated organic polymers is reviewed. A historical contextualization of aggregation-induced emission (AIE) phenomena is presented. This includes the loose bolt or free rotor effect and J-aggregation phenomena, and discusses their characteristic features, including structures and mechanisms. The basis of both effects is examined in key molecules, with a particular emphasis on the AIE effect occurring in conjugated organic polymers with a polythiophene (PT) skeleton with triphenylethylene (TPE) units. Rigidification of the excited state structure is one of the defining conditions required to obtain AIE, and thus, by changing from a flexible ground state to rigid (quinoidal-like) structures, oligo and PTs are among the most promising emerging molecules alongside with the more extensively used TPE derivatives. Molecular structures moving away from the domination of aggregation-caused quenching to AIE are presented. Future perspectives for the rational design of AIEgen structures are discussed.

Supramolecular Coordination Complexes as Optical Biosensors

In recent years, luminescent supramolecular coordination complexes (SCCs), including 2D-metallacycles and 3D-metallacages have been utilised for biomolecular analysis. Unlike small-molecular probes, the dimensions, size, shape, and flexibility of these complexes can easily be tuned by combining ligands designed with particular geometries, symmetries and denticity with metal ions with strong geometrical binding preferences. The well-defined cavities that result, in combination with the other non-covalent interactions that can be programmed into the ligand design, facilitate great selectivity towards guest binding. In this Review we will discuss the application of luminescent metallacycles and cages in the binding and detection of a wide range of biomolecules, such as carbohydrates, proteins, amino acids, and biogenic amines. We aim to explore the effect of the structural diversity of SCCs on the extent of biomolecular sensing, expressed in terms of sensitivity, selectivity and detection range.

Lipase sensing by naphthalene diimide based fluorescent organic nanoparticles: a solvent induced manifestation of self-assembly

The precise control of supramolecular self-assembly is gaining utmost interest for the demanding applications of manifested nano-architecture across the scientific domain. This study delineates the morphological transformation of naphthalene diimide (NDI) derived amphiphiles with varying water content in dimethyl sulfoxide (DMSO) and the selective sensing of lipase using its aggregation-induced emission (AIE) properties. To this end, NDI-based, benzyl alcohol protected alkyl chain (C1, C5, and C10) linked amphiphilic molecules (NDI-1,2,3) were synthesized. Among the synthesized amphiphiles, benzyl ester linked C5 tailored naphthalene diimide (NDI-2) exhibited AIE with an emission maximum at 490 nm in a DMSO-water binary solvent system from fw = 30% and above water content. The fibrous morphology of NDI-2 at fw = 30% got gradually transformed to spherical aggregated particles along with steady increment in the emission intensity upon increasing the amount of water in DMSO. At fw = 99% water in DMSO, complete transformation to fluorescent organic nanoparticles (FONPs) was observed. Microscopic and spectroscopic techniques demonstrated the solvent driven morphological transformation and the AIE property of NDI-2. Moreover, this AIE of NDI-2 FONPs was employed in the selective turn-off sensing of lipase against many other enzymes including esterase, through hydrolysis of a benzyl ester linkage with a limit of detection 10.0 ± 0.8 μg L-1. The NDI-2 FONP also exhibited its lipase sensing efficiency in vitro using a human serum sample.

Fluorescent polymer cubosomes and hexosomes with aggregation-induced emission

Fluorescent polymer cubosomes and hexosomes with aggregation-induced emission (AIE) were prepared from amphiphilic block copolymers PEG-b-PTPEMA where the hydrophobic block PTPEMA was a polymethacrylate with tetraphenylethene (TPE) as the AIE side group. Four highly asymmetric block copolymers with hydrophilic block weight ratio f PEG ≤ 20% were synthesized. Cubosomes and hexosomes with strong fluorescence emission were obtained by nanoprecipitation of polymers with f PEG < 9% in dioxane/water and THF/water systems. Their ordered internal structures were studied by electron microscopy (cryo-EM, SEM and TEM) and the X-ray scattering technique (SAXS). To elucidate the formation mechanisms of these inverted colloids, other parameters influencing the morphologies, like the water content during self-assembly and the organic solvent composition, were also investigated. This study not only inspires people to design novel building blocks for the preparation of functional cubosomes and hexosomes, but also presents the first AIE fluorescent polymer cubosome and hexosome with potential applications in bio-related fields.

Understanding Mechanochromic Luminescence on Account of Molecular Level Based on Phosphorescent Iridium(III) Complex Isomers

Mechanochromic luminescent (MCL) materials are promising in pressure sensors, security papers, photoelectric devices and optical data recording. Although some kinds of MCL-active iridium(III) complexes with various soft substituent functional ligands (e.g., dendritic carbazole, flexible chains, and Schiff base ligands) were reported, the MCL mechanism is still not clear and mainly ascribes to the physical phase transformations from crystalline state to amorphous state in response to force stimulus at present stage, and deserves further study in order to obtain more intelligent MCL materials. Herein, two new iridium(III) complex isomers are tactfully constructed and show distinctly opposite MCL properties in spite of the same physical phase transformations happening on them. The absolutely out of the ordinary MCL mechanism has been presented on account of molecular level for the first time via the comparative study of photophysical properties based on isomers 1 and 2 with the help of crystal structure analysis, room/low temperature emission spectra, NMR, PXRD, and TD-DFT calculations. All of these results suggest that the emitting state dominated by the triplet charge transfer excited state (³CT) plays a key role in achieving mechanochromic luminescence in iridium(III) complex systems.

Adaptive chirality of achiral tetraphenylethene-based tetracationic cyclophanes with dual responses of fluorescence and circular dichroism in water

Two tetraphenylethene-based tetracationic cyclophanes 1 and 2 were synthesized via a one-step S_N2 reaction without using any template. Based on the fluorescence and rotational conformation of the tetraphenylethene units, these water-soluble cyclophanes exhibited adaptive chirality with dual responses of turn-on fluorescence and induced circular dichroism when combined with nucleotides and DNA in water.

Contradiction or Unity? Thermally Stable Fluorescent Probe for In Situ Fast Identification of Self-sort or Co-assembly of Multicomponent Gelators with Sensitive Properties

Analyzing the assembly patterns of multicomponent gelators is important for understanding their assembly rules and precisely manipulating their molecular structure to form a tailored multifunctional supramolecular gel. But the fast in situ recognition technology to infer whether the assembly pattern is a self-sorting or co-assembled system is lacking. For developing a widely applicable stable and sensitive fluorescent probe to infer assembly patterns, we design and synthesize the multiple peripheral functional group tetraphenylethene (TPE) modified well-defined cubic core polyhedral oligomeric silsesquioxane (POSS) three-dimensional (3D) dendrimer. POSS-TPE can form a thermally stable self-assembly structure after being incubated in a wide temperature range, and the resultant special thermally stable photoluminescence (PL) intensity provides a novel possibility of fluorescent probe. Then, POSS-TPE sensitively catches the mechanical stress changes of the confined space provided by the gel networks and infers the assembly patterns by comparing the mechanical stress change laws of a self-sorting or co-assembled system. So, the application of fluorescent probe in assembly fields is enlarged in this research. In the future, this widely applicable fluorescent probe will be helpful to develop supramolecular assembly materials consisting of multicomponent gels.

Luminescent silver(i) complexes with pyrazole-tetraphenylethene ligands: turn-on fluorescence due to the coordination-driven rigidification and solvent-oriented structural transformation

A new tetrapyrazole-modified tetraphenylethene (TPE) ligand L was designed and found to display "turn-on" fluorescence when it combines with Ag⁺ ions in dilute solution by restricting intramolecular rotation of TPE. A series of Ag complexes 1-7 were obtained, and they exhibit excellent fluorescence properties in the solid state. Compared with PF₆^-, the silver complex with the CF₃SO₃^- anion can further enhance its fluorescence due to the transformation of its structure from Ag₂L (2) to Ag₄L₂ (3). As zero-dimensional complexes, 1 and 3 have excellent piezochromic properties with a color change from blue to green. Furthermore, structural changes of 1 and 3 to the corresponding three-dimensional frameworks 4 and 5 occur upon immersing in ethanol. In addition, 1 can act as a potential fluorescent probe for sensing nitrile compounds.

Innovative Synthetic Procedures for Luminogens Showing Aggregation-Induced Emission

As a consequence of their intrinsic advantageous properties, luminogens that show aggregation-induced emission (AIEgens) have received increasing global interest for a wide range of applications. Whereas general synthetic methods towards AIEgens largely rely on tedious procedures and limited reaction types, various innovative synthetic methods have now emerged as complementary, and even alternative, strategies. In this Review, we systematically highlight advancements made in metal-catalyzed functionalization and metal-free-promoted pathways for the construction of AIEgens over the past five years, and briefly illustrate new perspectives in this area. The development of innovative synthetic procedures will enable the facile synthesis of AIEgens with great structural diversity for multifunctional applications.

Temperature and pH Responsive Light-Harvesting System Based on AIE-Active Microgel for Cell Imaging

A highly emissive microgel is synthesized by polymerizing tetraphenylethene (TPE) based comonomers, acrylic acid, NIPAM, and permanent crosslinker ethylenebisacrylamide (BIS) (named as TPE microgel), which exhibited temperature responsive fluorescence emission. Rhodamine B (RhB), a positively charged molecule, is then inserted onto the surface of fabricated microgels through electrostatic interaction. As a result, a novel artificial light harvesting system with high energy transfer efficiency is constructed (named as TPE microgel-RhB light harvesting system), which is the first light harvesting system based on TPE microgels presenting dual response to pH and temperature. MTT assay indicates the fabricated TPE microgel and TPE microgel-RhB light harvesting system has good cytocompatibility. The strong fluorescence and good cytocompatibility make them perfect candidates for cell imaging. The prepared emissive microgel and light-harvesting system with desirable fluorescent property not only provide a new strategy for the fabrication of tunable luminescent nanomaterials, but also expand potential applications in the fields of stomach recognition, temperature sensors, and drug delivery.

AIE-based fluorescent sensors for low concentration toxic ion detection in water

Ions, including anions and heavy metals, are extremely toxic and easily accumulate in the human body, threatening the health of humans and even causing human death at low concentrations. It is therefore necessary to detect these toxic ions in low concentrations in water. Fluorescent sensing is a good method for detecting these ions, but some conventional dyes often exhibit an aggregation caused quench (ACQ) effect in their solid state, limiting their large-scale application. Fluorescent probes based on aggregation-induced emission (AIE) properties have received significant attention due to their high fluorescence quantum yields in their nano aggragated states, easy fabrication, use of moderate conditions, and selevtive recognization of organic/inorganic compounds in water with obvious changes in fluorescence. We surmarize the recent advances of AIE-based sensors for low concentration toxic ion detection in water. The detection probes can be divided into three categories: chemical reaction types, chemical interaction types and physical interaction types. Chemical reaction types utilize nucleophilic addition and coordination reaction, while chemical interaction types rely on hydrogen bonding and anion-π interactions. The physical interaction types are composed of electrostatic attractions. We finally comment on the challenges and outlook of AIE-active sensors.

Highly Photostable and Luminescent Donor-Acceptor Molecules for Ultrasensitive Detection of Sulfur Mustard

Real-time, high signal intensity, and prolonged detection is challenging because of the rarity of fluorophores with both high photostability and luminescence efficiency. In this work, new donor-acceptor (D-A) molecules for overcoming these limitations are reported. A hybridized local and an intramolecular charge-transfer excited state is demonstrated to afford high photoluminescence efficiency of these D-A molecules in solution (≈100%). The twisted molecular structure and bulky alkyl chains effectively suppress π-π and dipole-dipole interactions, enabling high luminescence efficiency of 1 and 2 in the solid state (≈94% and 100%). Furthermore, two D-A aggregates exhibit high photostability as evidenced by 4% and 8% of the fluorescence decreasing after 6 h of continuous irradiation in air, which is in sharp contrast to ≈95% of fluorescence decreasing in a reference compound. Importantly, with these molecules, ultrasensitive detection of sulfur mustard (SM) with a record limit of 10 ppb and selective detection of SM in complex matrices are achieved.

Facile fabrication of self-reporting micellar and vesicular structures based on an etching-ion exchange strategy of photonic composite spheres of poly(ionic liquid)

Micellar and vesicular structures capable of sensing and reporting the chemical environment as well as facilely introducing user-defined functions make a vital contribution to constructing versatile compartmentalized systems. Herein, by combining poly(ionic liquid)-based photonic spheres and an etching-ion exchange strategy we fabricate micellar and vesicular photonic compartments that can not only mimic the structure and function of conventional micelles and vesicles, but also sense and report the chemical environment as well as introducing user-defined functions. Photonic composite spheres composed of a SiO2 template and poly(ionic liquid) are employed to selectively etch outer-shell SiO2 followed by ion exchange and removal of the residual SiO2 to afford micellar photonic compartments (MPCs). The MPCs can selectively absorb solvents from the oil/water mixtures together with sensing and reporting the adsorbed solvents by the self-reporting optical signal associated with the uniform porous structure of photonic spheres. Vesicular photonic compartments (VPCs) are fabricated via selective infiltration and polymerization of ionic liquids followed by etching of the SiO2 template. Subsequent ion exchange introduces desirable functions to the VPCs. Furthermore, we demonstrate that the thickness and the anisotropic functions of VPCs can be facilely modulated. Overall, we anticipate that the micellar and vesicular photonic compartments with self-reporting optical signals and user-defined functions could serve as novel platforms towards multifunctional compartmentalized systems.

Biocompatible AIEgen/p-glycoprotein siRNA@reduction-sensitive paclitaxel polymeric prodrug nanoparticles for overcoming chemotherapy resistance in ovarian cancer

Nanoparticle drug delivery system (NDDS) is quite different from the widely studied traditional chemotherapy which suffers from drug resistance and side effect. NDDS offers the straightforward solution to the chemotherapy problem and provides an opportunity to monitor the drug delivery process in real time. In this vein, we developed one NDDS, namely Py-TPE/siRNA@PMP, to relieve resistance and side effects during chemotherapy against ovarian cancer. The Py-TPE/siRNA@PMP is a multifunctional polymeric nanoparticle contained several parts as follows: (1) a nanoparticle (NP) self-assembled by reduction-sensitive paclitaxel polymeric prodrug (PMP); (2) the glutathione (GSH)-responsive release of paclitaxel (PTX) for the suppression of ovarian cancer cells; (3) the P-glycoprotein (P-gp) siRNA for restoring the sensitivity of chemo-resistant tumor cells to chemotherapy; (4) the positively charged aggregation-induced emission fluorogen (AIEgen) Py-TPE for tumor imaging and promoting encapsulation of siRNA into the nanoparticle. Methods: The Py-TPE/siRNA@PMP nanoparticles were prepared by self-assembly method and characterized by the UV-Vis absorption spectra, zeta potentials, TEM image, stability assay and hydrodynamic size distributions. The combinational therapeutic effects of Py-TPE/siRNA@PMP on overcoming chemotherapy resistance were explored both in vitro and in vivo.Result: The Py-TPE/siRNA@PMP exhibited an average hydrodynamic size with a good stability. Meanwhile they gave rise to the remarkable chemotoxicity performances in vitro and suppressed the tumors growth in both SKOV-3/PTX (PTX resistance) subcutaneous and intraperitoneal metastasis tumor models. The investigations on ovarian cancer patient-derived xenografts (PDX) model revealed that Py-TPE/siRNA@PMP was able to effectively overcome their chemo-resistance with minimal side effects. Conclusion: Our findings demonstrated the Py-TPE/siRNA@PMP as a promising agent for the highly efficient treatment of PTX-resistant cells and overcoming the shortage of chemotherapy in ovarian cancer.

Supramolecular Engineering of Efficient Artificial Light-Harvesting Systems from Cyanovinylene Chromophores and Pillar[5]arene-Based Polymer Hosts

Enhanced emission and adjustable wavelength for single luminogen systems are highly desirable in the scope of photoluminescent materials. Herein, a supramolecular strategy has been proposed for supramolecular assembly-induced enhanced emission and valid emission manipulation by fabricating an amphiphilic copolymer host material with pillar[5]arene units as the side chains, whereby cyanovinylene-based (CV) derivatives are anchored to the polymer hosts via host-guest interactions. The guest-bearing copolymers can further form luminescent supramolecular polymer nanoparticles (SPNs). Remarkably, the as-prepared SPNs exhibit dramatic emission enhancement and tunable fluorescence wavelength, ascribing to the synergetic effects involving the restriction of intramolecular motions and the prevented excimer formation for CV moieties, as endowed by host-guest interactions and the entanglement of the polymer chains. Furthermore, the SPNs can be established as efficient artificial light-harvesting systems via the inclusion of Nile red into the particles for broadened emission spectra. As a proof-of-concept study, the use of pillar[5]arene-containing polymer hosts largely facilitates the emission enhancement and wavelength adjustment for the inherent luminogens, setting the basis for the supramolecular design of highly tunable luminescent systems.

Light-Gated Nano-Porous Capsules from Stereoisomer-Directed Self-Assemblies

Structuring pores into stable membrane and controlling their opening is extremely useful for applications that require nanopores as channels for material exchange and transportation. In this work, nanoporous vesicles with aggregation-induced emission (AIE) properties were developed from the amphiphilic polymer PEG550-TPE-Chol, in which the hydrophobic part is composed of a tetraphenylethene (TPE) group and a cholesterol moiety and the hydrophilic block is a poly(ethylene glycol) (PEG, M_n = 550 Da). Two stereoisomers, trans-PEG550-TPE-Chol and cis-PEG550-TPE-Chol, were successfully synthesized. These thermally stable stereoisomers showed distinct self-assembly behavior in water: trans-PEG550-TPE-Chol formed classical vesicles, while cis-PEG550-TPE-Chol self-assembled into cylindrical micelles. Interestingly, trans/cis mixtures of PEG550-TPE-Chol (trans/cis = 60/40), either naturally synthesized without isomers' separation during the synthesis or intentionally mixed using trans- and cis-isomers, constructed perforated vesicles with nanopores. Moreover, under the illumination of high intensity UV light (365 nm, 15 mW/cm²), the classical vesicles of trans-PEG550-TPE-Chol were perforated by its cis counterparts generated from the trans-cis photoisomerization, while the cylindrical micelles of cis-PEG550-TPE-Chol interweaved to form meshes and nanoporous membranes due to the trans-isomers produced by cis-trans photoisomerization. All of these assemblies in water emitted bright cyan fluorescence under UV light, while their constituent molecules were not fluorescent when solubilized in organic solvent. The AIE fluorescent normal vesicles and nanoporous vesicles may find potential applications in biotechnology as light-gated delivery vehicles and capsules with nanochannels for material exchange.

Coordination-Induced Emission from Tetraphenylethylene Units and Their Applications

Thanks to the potential of aggregation-induced emission (AIE) phenomena, improved stabilities, and the good selectivity and sensitivity of the chemical responses exhibited by the products, coordination-driven self-assembly with tetraphenylethylene (TPE) units has recently received much attention and has been widely investigated for application in chemical sensors, cell imaging agents, light-harvesting systems, and others. Several reviews have emerged on the topics of AIE chemistry and aggregation-induced emission luminogen (AIEgen)-based supramolecular assembles, however, there is still a distinct lack of full overviews of emission enhancement from the viewpoint of metal-coordination effects. Thus, this minireview offers recent advances that have been made in the design and application of TPE-based metallacycles, metallacages, metal-organic frameworks (MOFs) and coordination polymers (CPs).

Transporting mitochondrion-targeting photosensitizers into cancer cells by low-density lipoproteins for fluorescence-feedback photodynamic therapy

Low-density lipoproteins (LDLs) are an endogenous nanocarrier to transport lipids in vivo. Owing to their biocompatibility and biodegradability, reduced immunogenicity, and natural tumor-targeting capability, we, for the first time, report the reconstitution of native LDL particles with saturated fatty acids and a mitochondrion-targeting aggregation-induced emission (AIE) photosensitizer for fluorescence-feedback photodynamic therapy (PDT). In particular, a novel AIE photosensitizer (TPA-DPPy) with a donor-acceptor (D-A) structure and a pyridinium salt is designed and synthesized, which possesses typical AIE and twisted intramolecular charge transfer (TICT) characteristics as well as reactive oxygen species (ROS)-sensitizing capability. In view of its prominent photophysical and photochemical properties, TPA-DPPy is encapsulated into LDL particles for photodynamic killing of cancer cells that overexpress LDL receptors (LDLRs). The resultant LDL (rLDL) particles maintain a similar morphology and size distribution to native LDL particles, and are efficiently ingested by cancer cells via LDLR-mediated endocytosis, followed by the release of TPA-DPPy for mitochondrion-targeting. Upon light irradiation, the produced ROS surrounding mitochondria lead to efficient and irreversible cell apoptosis. Interestingly, this process can be fluorescently monitored in a real-time fashion, as reflected by the remarkably enhanced luminescence and blue-shifted emission, indicating the increased mechanical stress during apoptosis. Quantitative cell viability analysis suggests that TPA-DPPy exhibits an outstanding phototoxicity toward LDLR-overexpressing A549 cancer cells, with a killing efficiency of ca. 88%. The rLDL particles are a class of safe and multifunctional nanophototheranostic agents, holding great promise in high-quality PDT by providing real-time fluorescence feedback on the therapeutic outcome.

Fluorescent Probes for Selective Recognition of Hypobromous Acid: Achievements and Future Perspectives

Reactive oxygen species (ROS) have been implicated in numerous pathological processes and their homeostasis facilitates the dynamic balance of intracellular redox states. Among ROS, hypobromous acid (HOBr) has a high similarity to hypochlorous acid (HOCl) in both chemical and physical properties, whereas it has received relatively little attention. Meanwhile, selective recognition of endogenous HOBr suffers great challenges due to the fact that the concentration of this molecule is much lower than that of HOCl. Fluorescence-based detection systems have emerged as very important tools to monitor biomolecules in living cells and organisms owing to distinct advantages, particularly the temporal and spatial sampling for in vivo imaging applications. To date, the development of HOBr-specific fluorescent probes is still proceeding quite slowly, and the research related to this area has not been systematically summarized. In this review, we are the first to review the progress made so far in fluorescent probes for selective recognition and detection of HOBr. The molecular structures, sensing mechanisms, and their successful applications of these probes as bioimaging agents are discussed here in detail. Importantly, we hope this review will call for more attention to this rising field, and that this could stimulate new future achievements.

CH/π-interaction-driven self-assembly of tetraphenylethylene derivatives into the face to face arrangement

For tetraphenylethene (TPE) derivatives, it is difficult to determine the arrangement of the molecules in the aggregation state because disordered aggregation usually occurs. To solve the problem, we have explored a novel and facile strategy to investigate the aggregation mode of a TPE derivative framework in which the two neighboring ortho carbons of two phenyl moieties at the same ethylene carbon were linked with an alkoxyl chain (C4) (denoted as TPEC4). The XRD measurements on the particles obtained in a DMSO/H₂O mixture (f_w = 60%) showed sharp peaks which is consistent with the simulated XRD patterns on the basis of a single crystal structure of TPEC4, indicating well-ordered molecular packing in the aggregated state. The CH/π-interaction and solvophobicity driven self-assembly behaviour of the compound was observed in the DMSO/H₂O mixture. A face to face molecular packing structure that arises from quadruple intermolecular CH/π-interactions of the tetraphenylethylenes is the key motif for self-assembly in solution. The unique blue-red shifted emission in the DMSO/H₂O mixture associated with aggregated behaviour of the compound was also investigated. This discovery will provide the basis for theoretical research and the rational design of TPE-based luminogens.

The CH/π interaction can drive the TPE motif to adopt a face-to-face crystalline packing in this TPE benzene rings linked with an alkoxyl chain (C4) during aggregation.

Circularly polarized luminescent systems fabricated by Tröger's base derivatives through two different strategies

The Tröger's base derivative rac-TBPP was synthesized and separated into two enantiomers R 2N -TBPP and S 2N -TBPP by chiral column chromatography. These compounds show a strong circularly polarized luminescence with g lum values of +0.0021, and -0.0025, respectively. The second way to fabricate the rac-TBPP-based CPL-active material is to co-gel the fluorescent rac-TBPP with a chiral ᴅ-glutamic acid gelator DGG by co-assembly strategy. At the molar ratio of rac-TBPP/DGG = 1:80, the g lum value of the co-gel was about three times higher than the g lum values of R 2N -TBPP and S 2N -TBPP enantiomers. Interestingly, the CPL handedness of the rac-TBPP/DGG co-gel could be adjusted effectively by changing their stoichiometric ratios.

A mechanistic insight into benefits of aggregation induced emissive luminogens in cancer

Exploration of advanced chemotheranostics that benefit from a combined in vivo strategy of cancer diagnosis and chemotherapy simultaneously is highly valued and will expose novel possibilities in modifying treatment and reduce side effects. In recent years, nanodrug delivery systems that incorporate aggregation-induced emissive luminogens (AIEgens) have been developed to track and monitor anticancer drug release, trace translocation processes and predict chemotherapeutic responses. There are several classes of AIEgen based chemotheranostics such us stimuli-responsive nanoprodrugs, pH-sensitive mesoporous silica nanocarriers, supramolecular polymer systems, drug encapsulated carriers, carrier-free nanodrugs, self-indicating drug delivery nanomachines and AIEgen-prodrug co-assembly. The present review conveys mechanistic insight into the benefits of AIEgens in the theranostic application by illustrating the recent breakthroughs in chemotheranostic nanomedicines that incorporate these unique fluorophores as signal reporters. The perspectives that can be further explored are also highlighted with the hope to instil more research interest in the advancement of AIE active cancer chemotheranostics for imaging and treatment in vivo.HIGHLIGHTSAggregation induced emissive materials (AIEgens) exhibit unique advantages over conventional luminogens for synergistic diagnosis and chemotherapy of cancer in vivo.The combination of AIE and nanotechnology offers an excellent platform to fabricate advanced chemotheranostics for cancer therapy.

Self-assembling a natural small molecular inhibitor that shows aggregation-induced emission and potentiates antitumor efficacy

Targeted therapy using small molecular inhibitors has been developed to rewire key signaling pathways in tumor cells, but these inhibitors have had mixed success in the clinic due to their poor pharmaceutical properties and suboptimal intratumoral concentrations. Here, we developed a "self-assembling natural molecular inhibitor" strategy to test the efficacy and feasibility of the water-insoluble agent dasatinib (DAS), a tyrosine kinase inhibitor, for cancer therapy. By exploiting a facile reprecipitation protocol, the DAS inhibitor self-assembled into soluble supramolecular nanoparticles (termed sDNPs) in aqueous solution, without an exogenous excipient. This strategy is applicable for generating systemically injectable and colloid-stable therapeutic nanoparticles of hydrophobic small-molecule inhibitors. Concurrently, during this process, we observed aggregation-induced emission (AIE) of fluorescence for this self-assembled DAS, which makes sDNPs suitable for bioimaging and tracing of cellular trafficking. Notably, in an orthotopic model of breast cancer, administration of sDNPs induced a durable inhibition of primary tumors and reduced the metastatic tumor burden, significantly surpassing the effects of the free DAS inhibitor after oral delivery. In addition, low toxicity was observed for this platform, with effective avoidance of immunotoxicity. To the best of our knowledge, our studies provide the first successful demonstration of self-assembling natural molecular inhibitors with AIE and highlight the feasibility of this approach for the preparation of therapeutic nanoparticles for highly lethal human cancers and many other diseases.