An engineered microbial platform for direct biofuel production from brown macroalgae

Acquisition of the ability to assimilate mannitol by Saccharomyces cerevisiae through dysfunction of the general corepressor Tup1-Cyc8

Saccharomyces cerevisiae normally cannot assimilate mannitol, a promising brown macroalgal carbon source for bioethanol production. The molecular basis of this inability remains unknown. We found that cells capable of assimilating mannitol arose spontaneously from wild-type S. cerevisiae during prolonged culture in mannitol-containing medium. Based on microarray data, complementation analysis, and cell growth data, we demonstrated that acquisition of mannitol-assimilating ability was due to spontaneous mutations in the genes encoding Tup1 or Cyc8, which constitute a general corepressor complex that regulates many kinds of genes. We also showed that an S. cerevisiae strain carrying a mutant allele of CYC8 exhibited superior salt tolerance relative to other ethanologenic microorganisms; this characteristic would be highly beneficial for the production of bioethanol from marine biomass. Thus, we succeeded in conferring the ability to assimilate mannitol on S. cerevisiae through dysfunction of Tup1-Cyc8, facilitating production of ethanol from mannitol.

Structure-based conversion of the coenzyme requirement of a short-chain dehydrogenase/reductase involved in bacterial alginate metabolism

The alginate-assimilating bacterium, Sphingomonas sp. strain A1, degrades the polysaccharides to monosaccharides through four alginate lyase reactions. The resultant monosaccharide, which is nonenzymatically converted to 4-deoxy-L-erythro-5-hexoseulose uronate (DEH), is further metabolized to 2-keto-3-deoxy-D-gluconate by NADPH-dependent reductase A1-R in the short-chain dehydrogenase/reductase (SDR) family. A1-R-deficient cells produced another DEH reductase, designated A1-R', with a preference for NADH. Here, we show the identification of a novel NADH-dependent DEH reductase A1-R' in strain A1, structural determination of A1-R' by x-ray crystallography, and structure-based conversion of a coenzyme requirement in SDR enzymes, A1-R and A1-R'. A1-R' was purified from strain A1 cells and enzymatically characterized. Except for the coenzyme requirement, there was no significant difference in enzyme characteristics between A1-R and A1-R'. Crystal structures of A1-R' and A1-R'·NAD(+) complex were determined at 1.8 and 2.7 Å resolutions, respectively. Because of a 64% sequence identity, overall structures of A1-R' and A1-R were similar, although a difference in the coenzyme-binding site (particularly the nucleoside ribose 2' region) was observed. Distinct from A1-R, A1-R' included a negatively charged, shallower binding site. These differences were caused by amino acid residues on the two loops around the site. The A1-R' mutant with the two A1-R-typed loops maintained potent enzyme activity with specificity for NADPH rather than NADH, demonstrating that the two loops determine the coenzyme requirement, and loop exchange is a promising method for conversion of coenzyme requirement in the SDR family.

The genome-scale metabolic network of Ectocarpus siliculosus (EctoGEM): a resource to study brown algal physiology and beyond

Brown algae (stramenopiles) are key players in intertidal ecosystems, and represent a source of biomass with several industrial applications. Ectocarpus siliculosus is a model to study the biology of these organisms. Its genome has been sequenced and a number of post-genomic tools have been implemented. Based on this knowledge, we report the reconstruction and analysis of a genome-scale metabolic network for E. siliculosus, EctoGEM (http://ectogem.irisa.fr). This atlas of metabolic pathways consists of 1866 reactions and 2020 metabolites, and its construction was performed by means of an integrative computational approach for identifying metabolic pathways, gap filling and manual refinement. The capability of the network to produce biomass was validated by flux balance analysis. EctoGEM enabled the reannotation of 56 genes within the E. siliculosus genome, and shed light on the evolution of metabolic processes. For example, E. siliculosus has the potential to produce phenylalanine and tyrosine from prephenate and arogenate, but does not possess a phenylalanine hydroxylase, as is found in other stramenopiles. It also possesses the complete eukaryote molybdenum co-factor biosynthesis pathway, as well as a second molybdopterin synthase that was most likely acquired via horizontal gene transfer from cyanobacteria by a common ancestor of stramenopiles. EctoGEM represents an evolving community resource to gain deeper understanding of the biology of brown algae and the diversification of physiological processes. The integrative computational method applied for its reconstruction will be valuable to set up similar approaches for other organisms distant from biological benchmark models.

Optimal production of 4-deoxy-L-erythro-5-hexoseulose uronic acid from alginate for brown macro algae saccharification by combining endo- and exo-type alginate lyases

Algae are considered as third-generation biomass, and alginate is the main component of brown macroalgae. Alginate can be enzymatically depolymerized by alginate lyases into uronate monomers, such as mannuronic acid and guluronic acid, which are further nonenzymatically converted to 4-deoxy-L-erythro-5-hexoseulose uronic acid (DEH). We have optimized an enzymatic saccharification process using two recombinant alginate lyases, endo-type Alg7D and exo-type Alg17C, for the efficient production of DEH from alginate. When comparing the sequential and simultaneous additions of Alg7D and Alg17C, it was found that the final yield of DEH was significantly higher when the enzymes were added sequentially. The progress of saccharification reactions and production of DEH were verified by thin layer chromatography and gas chromatography-mass spectrometry, respectively. Our results showed that the two recombinant enzymes could be exploited for the efficient production of DEH that is the key substrate for producing biofuels from brown macro algal biomass.

Phylogenomically guided identification of industrially relevant GH1 β-glucosidases through DNA synthesis and nanostructure-initiator mass spectrometry

Harnessing the biotechnological potential of the large number of proteins available in sequence databases requires scalable methods for functional characterization. Here we propose a workflow to address this challenge by combining phylogenomic guided DNA synthesis with high-throughput mass spectrometry and apply it to the systematic characterization of GH1 β-glucosidases, a family of enzymes necessary for biomass hydrolysis, an important step in the conversion of lignocellulosic feedstocks to fuels and chemicals. We synthesized and expressed 175 GH1s, selected from over 2000 candidate sequences to cover maximum sequence diversity. These enzymes were functionally characterized over a range of temperatures and pHs using nanostructure-initiator mass spectrometry (NIMS), generating over 10,000 data points. When combined with HPLC-based sugar profiling, we observed GH1 enzymes active over a broad temperature range and toward many different β-linked disaccharides. For some GH1s we also observed activity toward laminarin, a more complex oligosaccharide present as a major component of macroalgae. An area of particular interest was the identification of GH1 enzymes compatible with the ionic liquid 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]), a next-generation biomass pretreatment technology. We thus searched for GH1 enzymes active at 70 °C and 20% (v/v) [C2mim][OAc] over the course of a 24-h saccharification reaction. Using our unbiased approach, we identified multiple enzymes of different phylogentic origin with such activities. Our approach of characterizing sequence diversity through targeted gene synthesis coupled to high-throughput screening technologies is a broadly applicable paradigm for a wide range of biological problems.

MEP pathway-mediated isopentenol production in metabolically engineered Escherichia coli

Background

Isopentenols, such as prenol and isoprenol, are promising advanced biofuels because of their higher energy densities and better combustion efficiencies compared with ethanol. Microbial production of isopentenols has been developed recently via metabolically engineered E. coli. However, current yields remain low and the underlying pathways require systematic optimization.

Results

In this study, we targeted the E. coli native 2-methyl-(D)-erythritol-4-phosphate (MEP) pathway and its upstream glycolysis pathway for the optimization of isopentenol production. Two codon optimized genes, nudF and yhfR from Bacillus subtilis, were synthesized and expressed in E. coli W3110 to confer the isopentenol production of the strain. Two key enzymes (IspG and Dxs) were then overexpressed to optimize the E. coli native MEP pathway, which led to a significant increase (3.3-fold) in isopentenol production. Subsequently, the glycolysis pathway was tuned to enhance the precursor and NADPH supplies for the MEP pathway by activating the pentose phosphate pathway (PPP) and Entner-Doudoroff pathway (ED), which resulted in additional 1.9 folds of increase in isopentenol production. A 5 L-scale batch cultivation experiment was finally implemented, showing a total of 61.9 mg L⁻¹ isopentenol production from 20 g L⁻¹ of glucose.

Conclusion

The isopentenol production was successfully increased through multi-step optimization of the MEP and its upstream glycolysis pathways. It demonstrated that the total fluxes and their balance of the precursors of the MEP pathway are of critical importance in isopentenol production. In the future, an elucidation of the contribution of PPP and ED to MEP is needed for further optimization of isopentenol production.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-014-0135-y) contains supplementary material, which is available to authorized users.

Molecular insight into the role of the N-terminal extension in the maturation, substrate recognition, and catalysis of a bacterial alginate lyase from polysaccharide lyase family 18

Bacterial alginate lyases, which are members of several polysaccharide lyase (PL) families, have important biological roles and biotechnological applications. The mechanisms for maturation, substrate recognition, and catalysis of PL18 alginate lyases are still largely unknown. A PL18 alginate lyase, aly-SJ02, from Pseudoalteromonas sp. 0524 displays a β-jelly roll scaffold. Structural and biochemical analyses indicated that the N-terminal extension in the aly-SJ02 precursor may act as an intramolecular chaperone to mediate the correct folding of the catalytic domain. Molecular dynamics simulations and mutational assays suggested that the lid loops over the aly-SJ02 active center serve as a gate for substrate entry. Molecular docking and site-directed mutations revealed that certain conserved residues at the active center, especially those at subsites +1 and +2, are crucial for substrate recognition. Tyr(353) may function as both a catalytic base and acid. Based on our results, a model for the catalysis of aly-SJ02 in alginate depolymerization is proposed. Moreover, although bacterial alginate lyases from families PL5, 7, 15, and 18 adopt distinct scaffolds, they share the same conformation of catalytic residues, reflecting their convergent evolution. Our results provide the foremost insight into the mechanisms of maturation, substrate recognition, and catalysis of a PL18 alginate lyase.

Characterization of an alginate lyase, FlAlyA, from Flavobacterium sp. strain UMI-01 and its expression in Escherichia coli

A major alginate lyase, FlAlyA, was purified from the periplasmic fraction of an alginate-assimilating bacterium, Flavobacterium sp. strain UMI-01. FlAlyA showed a single band of ~30 kDa on SDS-PAGE and exhibited the optimal temperature and pH at 55 °C and pH 7.7, respectively. Analyses for substrate preference and reaction products indicated that FlAlyA was an endolytic poly(mannuronate) lyase (EC 4.2.2.3). A gene fragment encoding the amino-acid sequence of 288 residues for FlAlyA was amplified by inverse PCR. The N-terminal region of 21 residues except for the initiation Met in the deduced sequence was predicted as the signal peptide and the following region of six residues was regarded as propeptide, while the C-terminal region of 260 residues was regarded as the polysaccharide-lyase-family-7-type catalytic domain. The entire coding region for FlAlyA was subjected to the pCold I—Escherichia coli BL21(DE3) expression system and ~eight times higher yield of recombinant FlAlyA (recFlAlyA) than that of native FlAlyA was achieved. The recFlAlyA recovered in the periplasmic fraction of E. coli had lost the signal peptide region along with the N-terminal 3 residues of propeptide region. This suggested that the signal peptide of FlAlyA could function in part in E. coli.

Draft Genome Sequence of Falsirhodobacter sp. Strain alg1, an Alginate-Degrading Bacterium Isolated from Fermented Brown Algae

Falsirhodobacter sp. alg1 is an alginate-degrading bacterium, the second species from the nonphototrophic bacterial genus Falsirhodobacter. We report the first draft genome of a bacterium from this genus and point out possible important features related to alginate assimilation and its evolutionary aspects.

Characterization of a GHF45 cellulase, AkEG21, from the common sea hare Aplysia kurodai

The common sea hare Aplysia kurodai is known to be a good source for the enzymes degrading seaweed polysaccharides. Recently four cellulases, i.e., 95, 66, 45, and 21 kDa enzymes, were isolated from A. kurodai (Tsuji et al., 2013). The former three cellulases were regarded as glycosyl-hydrolase-family 9 (GHF9) enzymes, while the 21 kDa cellulase was suggested to be a GHF45 enzyme. The 21 kDa cellulase was significantly heat stable, and appeared to be advantageous in performing heterogeneous expression and protein-engineering study. In the present study, we determined some enzymatic properties of the 21 kDa cellulase and cloned its cDNA to provide the basis for the protein engineering study of this cellulase. The purified 21 kDa enzyme, termed AkEG21 in the present study, hydrolyzed carboxymethyl cellulose with an optimal pH and temperature at 4.5 and 40°C, respectively. AkEG21 was considerably heat-stable, i.e., it was not inactivated by the incubation at 55°C for 30 min. AkEG21 degraded phosphoric-acid-swollen cellulose producing cellotriose and cellobiose as major end products but hardly degraded oligosaccharides smaller than tetrasaccharide. This indicated that AkEG21 is an endolytic β-1,4-glucanase (EC 3.2.1.4). A cDNA of 1013 bp encoding AkEG21 was amplified by PCR and the amino-acid sequence of 197 residues was deduced. The sequence comprised the initiation Met, the putative signal peptide of 16 residues for secretion and the catalytic domain of 180 residues, which lined from the N-terminus in this order. The sequence of the catalytic domain showed 47–62% amino-acid identities to those of GHF45 cellulases reported in other mollusks. Both the catalytic residues and the N-glycosylation residues known in other GHF45 cellulases were conserved in AkEG21. Phylogenetic analysis for the amino-acid sequences suggested the close relation between AkEG21 and fungal GHF45 cellulases.

Advances and computational tools towards predictable design in biological engineering

The design process of complex systems in all the fields of engineering requires a set of quantitatively characterized components and a method to predict the output of systems composed by such elements. This strategy relies on the modularity of the used components or the prediction of their context-dependent behaviour, when parts functioning depends on the specific context. Mathematical models usually support the whole process by guiding the selection of parts and by predicting the output of interconnected systems. Such bottom-up design process cannot be trivially adopted for biological systems engineering, since parts function is hard to predict when components are reused in different contexts. This issue and the intrinsic complexity of living systems limit the capability of synthetic biologists to predict the quantitative behaviour of biological systems. The high potential of synthetic biology strongly depends on the capability of mastering this issue. This review discusses the predictability issues of basic biological parts (promoters, ribosome binding sites, coding sequences, transcriptional terminators, and plasmids) when used to engineer simple and complex gene expression systems in Escherichia coli. A comparison between bottom-up and trial-and-error approaches is performed for all the discussed elements and mathematical models supporting the prediction of parts behaviour are illustrated.

Ag43-mediated display of a thermostable β-glucosidase in Escherichia coli and its use for simultaneous saccharification and fermentation at high temperatures

Background

The autotransporter (AT) system can potentially be used in the secretion of saccharolytic enzymes for the production of lignocellulosic biofuels and chemicals using Escherichia coli. Although ATs share similar structural characteristics, their capacity for secreting heterologous proteins widely varies. Additionally, the saccharolytic enzyme selected to be secreted should match the cell growth or cell fermentation conditions of E. coli.

Results

In the search for an AT that suits the physiological performance of the homo-ethanologenic E. coli strain MS04, an expression plasmid based on the AT antigen 43 (Ag43) from E. coli was developed. The β-glucosidase BglC from the thermophile bacterium Thermobifida fusca was displayed on the outer membrane of the E. coli strain MS04 using the Ag43 system (MS04/pAg43BglC). This strain was used to hydrolyze and ferment 40 g/L of cellobiose in mineral media to produce 16.65 g/L of ethanol in 48 h at a yield of 81% of the theoretical maximum. Knowing that BglC shows its highest activity at 50°C and retains more than 70% of its activity at pH 6, therefore E. coli MS04/pAg43BglC was used to ferment crystalline cellulose (Avicel) in a simultaneous saccharification and fermentation (SSF) process using a commercial cocktail of cellulases (endo and exo) at pH 6 and at a relatively high temperature for E. coli (45°C). As much as 22 g/L of ethanol was produced in 48 h.

Conclusions

The Ag43-BglC system can be used in E. coli strains without commercial β-glucosidases, reducing the quantities of commercial enzymes needed for the SSF process. Furthermore, the present work shows that E. coli cells are able to ferment sugars at 45°C during the SSF process using 40 g/L of Avicel, reducing the gap between the working conditions of the commercial saccharolytic enzymes and ethanologenic E. coli.

Metagenomic scaffolds enable combinatorial lignin transformation

Engineering the microbial transformation of lignocellulosic biomass is essential to developing modern biorefining processes that alleviate reliance on petroleum-derived energy and chemicals. Many current bioprocess streams depend on the genetic tractability of Escherichia coli with a primary emphasis on engineering cellulose/hemicellulose catabolism, small molecule production, and resistance to product inhibition. Conversely, bioprocess streams for lignin transformation remain embryonic, with relatively few environmental strains or enzymes implicated. Here we develop a biosensor responsive to monoaromatic lignin transformation products compatible with functional screening in E. coli. We use this biosensor to retrieve metagenomic scaffolds sourced from coal bed bacterial communities conferring an array of lignin transformation phenotypes that synergize in combination. Transposon mutagenesis and comparative sequence analysis of active clones identified genes encoding six functional classes mediating lignin transformation phenotypes that appear to be rearrayed in nature via horizontal gene transfer. Lignin transformation activity was then demonstrated for one of the predicted gene products encoding a multicopper oxidase to validate the screen. These results illuminate cellular and community-wide networks acting on aromatic polymers and expand the toolkit for engineering recombinant lignin transformation based on ecological design principles.

Voltage-controlled enzyme-catalyzed glucose-gluconolactone conversion using a field-effect enzymatic detector

The field-effect enzymatic detection (FEED) technique was used to control the kinetics of the enzymatic conversion of glucose to gluconolactone. The glucose-gluconolactone conversion occurring at an enzyme-immobilized electrode, a well-studied process, was confirmed using mass spectrometry. Electrochemical studies showed that the glucose oxidation current depends on the gating voltage VG and the ion concentration of the sample solution. Additionally, the depletion of glucose in the sample also showed a dependence on VG. FEED was used to detect H2O2 on the zepto-molar level in order to show the ultrasensitive detection capability of the technique. These results, while providing evidence for the proposed mechanism of FEED, indicate that VG controls the conversion process. The effect of VG on the glucose-gluconolactone conversion was demonstrated by the observed VG-dependent kinetic parameters of the conversion process.

Multiplex genome editing by natural transformation

Editing bacterial genomes is an essential tool in research and synthetic biology applications. Here, we describe multiplex genome editing by natural transformation (MuGENT), a method for accelerated evolution based on the cotransformation of unlinked genetic markers in naturally competent microorganisms. We found that natural cotransformation allows scarless genome editing at unprecedented frequencies of ∼50%. Using DNA substrates with randomized nucleotides, we found no evidence for bias during natural cotransformation, indicating that this method can be used for directed evolution studies. Furthermore, we found that natural cotransformation is an effective method for multiplex genome editing. Because MuGENT does not require selection at edited loci in cis, output mutant pools are highly complex, and strains may have any number and combination of the multiplexed genome edits. We demonstrate the utility of this technique in metabolic and phenotypic engineering by optimizing natural transformation in Vibrio cholerae. This was accomplished by combinatorially editing the genome via gene deletions and promoter replacements and by tuning translation initiation of five genes involved in the process of natural competence and transformation. MuGENT allowed for the generation of a complex mutant pool in 1 wk and resulted in the selection of a genetically edited strain with a 30-fold improvement in natural transformation. We also demonstrate the efficacy of this technique in Streptococcus pneumoniae and highlight the potential for MuGENT to be used in multiplex genetic interaction analysis. Thus, MuGENT is a broadly applicable platform for accelerated evolution and genetic interaction studies in diverse naturally competent species.

Alginate-dependent gene expression mechanism in Sphingomonas sp. strain A1

Sphingomonas sp. strain A1, a Gram-negative bacterium, directly incorporates alginate polysaccharide into the cytoplasm through a periplasmic alginate-binding protein-dependent ATP-binding cassette transporter. The polysaccharide is degraded to monosaccharides via the formation of oligosaccharides by endo- and exotype alginate lyases. The strain A1 proteins for alginate uptake and degradation are encoded in both strands of a genetic cluster in the bacterial genome and inducibly expressed in the presence of alginate. Here we show the function of the alginate-dependent transcription factor AlgO and its mode of action on the genetic cluster and alginate oligosaccharides. A putative gene within the genetic cluster seems to encode a transcription factor-like protein (AlgO). Mutant strain A1 (ΔAlgO mutant) cells with a disrupted algO gene constitutively produced alginate-related proteins. DNA microarray analysis indicated that wild-type cells inducibly transcribed the genetic cluster only in the presence of alginate, while ΔAlgO mutant cells constitutively expressed the genetic cluster. A gel mobility shift assay showed that AlgO binds to the specific intergenic region between algO and algS (algO-algS). Binding of AlgO to the algO-algS intergenic region diminished with increasing alginate oligosaccharides. These results demonstrated a novel alginate-dependent gene expression mechanism. In the absence of alginate, AlgO binds to the algO-algS intergenic region and represses the expression of both strands of the genetic cluster, while in the presence of alginate, AlgO dissociates from the algO-algS intergenic region via binding to alginate oligosaccharides produced through the lyase reaction and subsequently initiates transcription of the genetic cluster. This is the first report on the mechanism by which alginate regulates the expression of the gene cluster.

Comparative biochemical characterization of three exolytic oligoalginate lyases from Vibrio splendidus reveals complementary substrate scope, temperature, and pH adaptations

Marine microbes use alginate lyases to degrade and catabolize alginate, a major cell wall matrix polysaccharide of brown seaweeds. Microbes frequently contain multiple, apparently redundant alginate lyases, raising the question of whether these enzymes have complementary functions. We report here on the molecular cloning and functional characterization of three exo-type oligoalginate lyases (OalA, OalB, and OalC) from Vibrio splendidus 12B01 (12B01), a marine bacterioplankton species. OalA was most active at 16°C, had a pH optimum of 6.5, and displayed activities toward poly-β-d-mannuronate [poly(M)] and poly-α-l-guluronate [poly(G)], indicating that it is a bifunctional enzyme. OalB and OalC were most active at 30 and 35°C, had pH optima of 7.0 and 7.5, and degraded poly(M·G) and poly(M), respectively. Detailed kinetic analyses of oligoalginate lyases with poly(G), poly(M), and poly(M·G) and sodium alginate as substrates demonstrated that OalA and OalC preferred poly(M), whereas OalB preferred poly(M·G). The catalytic efficiency (kcat/Km) of OalA against poly(M) increased with decreasing size of the substrate. OalA showed kcat/Km from 2,130 mg(-1) ml s(-1) for the trisaccharide to 224 mg(-1) ml s(-1) for larger oligomers of ∼50 residues, and 50.5 mg(-1) ml s(-1) for high-molecular-weight alginate. Although OalA was most active on the trisaccharide, OalB and OalC preferred dimers. Taken together, our results indicate that these three Oals have complementary substrate scopes and temperature and pH adaptations.

Bacterial pyruvate production from alginate, a promising carbon source from marine brown macroalgae

Marine brown macroalgae is a promising source of material for biorefining, and alginate is one of the major components of brown algae. Despite the huge potential availability of alginate, no system has been reported for the production of valuable compounds other than ethanol from alginate, hindering its further utilization. Here we report that a bacterium, Sphingomonas sp. strain A1, produces pyruvate from alginate and secretes it into the medium. High aeration and deletion of the gene for d-lactate dehydrogenase are critical for the production of high concentrations of pyruvate. Pyruvate concentration and productivity were at their maxima (4.56 g/l and 95.0 mg/l/h, respectively) in the presence of 5% (w/v) initial alginate, whereas pyruvate produced per alginate consumed and % of theoretical yield (0.19 g/g and 18.6%, respectively) were at their maxima at 4% (w/v) initial alginate. Concentration of pyruvate decreased after it reached its maximum after cultivations for 2 or 3 days at 145 strokes per minute. Our study is the first report to demonstrate the production of other valuable compounds than ethanol from alginate, a promising marine macroalgae carbon source.

Microorganisms living on macroalgae: diversity, interactions, and biotechnological applications

Marine microorganisms play key roles in every marine ecological process, hence the growing interest in studying their populations and functions. Microbial communities on algae remain underexplored, however, despite their huge biodiversity and the fact that they differ markedly from those living freely in seawater. The study of this microbiota and of its relationships with algal hosts should provide crucial information for ecological investigations on algae and aquatic ecosystems. Furthermore, because these microorganisms interact with algae in multiple, complex ways, they constitute an interesting source of novel bioactive compounds with biotechnological potential, such as dehalogenases, antimicrobials, and alga-specific polysaccharidases (e.g., agarases, carrageenases, and alginate lyases). Here, to demonstrate the huge potential of alga-associated organisms and their metabolites in developing future biotechnological applications, we first describe the immense diversity and density of these microbial biofilms. We further describe their complex interactions with algae, leading to the production of specific bioactive compounds and hydrolytic enzymes of biotechnological interest. We end with a glance at their potential use in medical and industrial applications.

Metabolic engineering of a Saccharomyces cerevisiae strain capable of simultaneously utilizing glucose and galactose to produce enantiopure (2R,3R)-butanediol

2,3-Butanediol (BDO) is an important chemical with broad industrial applications and can be naturally produced by many bacteria at high levels. However, the pathogenicity of these native producers is a major obstacle for large scale production. Here we report the engineering of an industrially friendly host, Saccharomyces cerevisiae, to produce BDO at high titer and yield. By inactivation of pyruvate decarboxylases (PDCs) followed by overexpression of MTH1 and adaptive evolution, the resultant yeast grew on glucose as the sole carbon source with ethanol production completely eliminated. Moreover, the pdc- strain consumed glucose and galactose simultaneously, which to our knowledge is unprecedented in S. cerevisiae strains. Subsequent introduction of a BDO biosynthetic pathway consisting of the cytosolic acetolactate synthase (cytoILV2), Bacillus subtilis acetolactate decarboxylase (BsAlsD), and the endogenous butanediol dehydrogenase (BDH1) resulted in the production of enantiopure (2R,3R)-butanediol (R-BDO). In shake flask fermentation, a yield over 70% of the theoretical value was achieved. Using fed-batch fermentation, more than 100g/L R-BDO (1100mM) was synthesized from a mixture of glucose and galactose, two major carbohydrate components in red algae. The high titer and yield of the enantiopure R-BDO produced as well as the ability to co-ferment glucose and galactose make our engineered yeast strain a superior host for cost-effective production of bio-based BDO from renewable resources.

Comparison of various microbial inocula for the efficient anaerobic digestion of Laminaria hyperborea

BACKGROUND

The hydrolysis of seaweed polysaccharides is the rate limiting step in anaerobic digestion (AD) of seaweeds. Seven different microbial inocula and a mixture of these (inoculum 8) were therefore compared in triplicate, each grown over four weeks in static culture for the ability to degrade Laminaria hyperborea seaweed and produce methane through AD.

RESULTS

All the inocula could degrade L. hyperborea and produce methane to some extent. However, an inoculum of slurry from a human sewage anaerobic digester, one of rumen contents from seaweed-eating North Ronaldsay sheep and inoculum 8 used most seaweed volatile solids (VS) (means ranged between 59 and 68% used), suggesting that these each had efficient seaweed polysaccharide digesting bacteria. The human sewage inoculum, an inoculum of anaerobic marine mud mixed with rotting seaweed and inoculum 8 all developed to give higher volumes of methane (means between 41 and 62.5 ml g-1 of seaweed VS by week four) ,compared to other inocula (means between 3.5 and 27.5 ml g-1 VS). Inoculum 8 also gave the highest acetate production (6.5 mmol g-1 VS) in a single-stage fermenter AD system and produced most methane (8.4 mL mmol acetate-1) in phase II of a two-stage AD system.

CONCLUSIONS

Overall inoculum 8 was found to be the most efficient inoculum for AD of seaweed. The study therefore showed that selection and inclusion of efficient polysaccharide hydrolysing bacteria and methanogenic archaea in an inoculum offer increased methane productivity in AD of L. hyperborea. This inoculum will now being tested in larger scale (10L) continuously stirred reactors optimised for feed rate and retention time to determine maximum methane production under single-stage and two-stage AD systems.

Regulation of pH attenuates toxicity of a byproduct produced by an ethanologenic strain of Sphingomonas sp. A1 during ethanol fermentation from alginate

Marine macroalgae is a promising carbon source that contains alginate and mannitol as major carbohydrates. A bioengineered ethanologenic strain of the bacterium Sphingomonas sp. A1 can produce ethanol from alginate, but not mannitol, whereas the yeast Saccharomyces paradoxus NBRC 0259–3 can produce ethanol from mannitol, but not alginate. Thus, one practical approach for converting both alginate and mannitol into ethanol would involve two-step fermentation, in which the ethanologenic bacterium initially converts alginate into ethanol, and then the yeast produces ethanol from mannitol. In this study, we found that, during fermentation from alginate, the ethanologenic bacterium lost viability and secreted toxic byproducts into the medium. These toxic byproducts inhibited bacterial growth and killed bacterial cells and also inhibited growth of S. paradoxus NBRC 0259–3. We discovered that adjusting the pH of the culture supernatant or the culture medium containing the toxic byproducts to 6.0 attenuated the toxicity toward both bacteria and yeast, and also extended the period of viability of the bacterium. Although continuous adjustment of pH to 6.0 failed to improve the ethanol productivity of this ethanologenic bacterium, this pH adjustment worked very well in the two-step fermentation due to the attenuation of toxicity toward S. paradoxus NBRC 0259–3. These findings provide information critical for establishment of a practical system for ethanol production from brown macroalgae.

Efficient ethanol production from brown macroalgae sugars by a synthetic yeast platform

The increasing demands placed on natural resources for fuel and food production require that we explore the use of efficient, sustainable feedstocks such as brown macroalgae. The full potential of brown macroalgae as feedstocks for commercial-scale fuel ethanol production, however, requires extensive re-engineering of the alginate and mannitol catabolic pathways in the standard industrial microbe Saccharomyces cerevisiae. Here we present the discovery of an alginate monomer (4-deoxy-L-erythro-5-hexoseulose uronate, or DEHU) transporter from the alginolytic eukaryote Asteromyces cruciatus. The genomic integration and overexpression of the gene encoding this transporter, together with the necessary bacterial alginate and deregulated native mannitol catabolism genes, conferred the ability of an S. cerevisiae strain to efficiently metabolize DEHU and mannitol. When this platform was further adapted to grow on mannitol and DEHU under anaerobic conditions, it was capable of ethanol fermentation from mannitol and DEHU, achieving titres of 4.6% (v/v) (36.2 g l(-1)) and yields up to 83% of the maximum theoretical yield from consumed sugars. These results show that all major sugars in brown macroalgae can be used as feedstocks for biofuels and value-added renewable chemicals in a manner that is comparable to traditional arable-land-based feedstocks.

Microwave-induced low temperature pyrolysis of macroalgae for unprecedented hydrogen-enriched syngas production

An efficient methodology based on low temperature microwave-induced pyrolysis has been developed for syngas production from macroalgae.

Coupled hydrodynamic and wastewater plume models of Belfast Lough, Northern Ireland: a predictive tool for future ecological studies

Wastewater outfalls provide a natural laboratory for the study of nutrient dynamics in coastal seas, however if properly designed and operated their impact can be difficult to detect. A model was developed and applied to investigate the effect of variation in hydrodynamic conditions on the transport and dilution of a treated wastewater plume in Belfast Lough, Northern Ireland. To validate these predictions we measured the physiochemical properties of the waters surrounding the outfall with a specific focus on inherent plume tracers likely to be relevant to the study of macroalgae (salinity, nitrogen and phosphorus). The model performed well and our data show high dilution of the plume, even under neap-tide conditions. This provides a spatially and temporally defined predictive framework for future studies investigating the compliance of Northern Ireland's coastal waters with European Water Framework Directive objectives and for feasibility studies investigating macroalgal aquaculture near wastewater outfalls.

Enhanced production of green tide algal biomass through additional carbon supply

Intensive algal cultivation usually requires a high flux of dissolved inorganic carbon (Ci) to support productivity, particularly for high density algal cultures. Carbon dioxide (CO2) enrichment can be used to overcome Ci limitation and enhance productivity of algae in intensive culture, however, it is unclear whether algal species with the ability to utilise bicarbonate (HCO3 (-)) as a carbon source for photosynthesis will benefit from CO2 enrichment. This study quantified the HCO3 (-) affinity of three green tide algal species, Cladophora coelothrix, Cladophora patentiramea and Chaetomorpha linum, targeted for biomass and bioenergy production. Subsequently, we quantified productivity and carbon, nitrogen and ash content in response to CO2 enrichment. All three species had similar high pH compensation points (9.7-9.9), and grew at similar rates up to pH 9, demonstrating HCO3 (-) utilization. Algal cultures enriched with CO2 as a carbon source had 30% more total Ci available, supplying twenty five times more CO2 than the control. This higher Ci significantly enhanced the productivity of Cladophora coelothrix (26%), Chaetomorpha linum (24%) and to a lesser extent for Cladophora patentiramea (11%), compared to controls. We demonstrated that supplying carbon as CO2 can enhance the productivity of targeted green tide algal species under intensive culture, despite their clear ability to utilise HCO3 (-).

Enzymatic hydrolysis and production of bioethanol from common macrophytic green alga Ulva fasciata Delile

The green seaweed Ulva which proliferates fast and occurs abundantly worldwide was used as a feedstock for production of ethanol following enzymatic hydrolysis. Among the different cellulases investigated for efficient saccharification, cellulase 22119 showed the highest conversion efficiency of biomass into reducing sugars than Viscozyme L, Cellulase 22086 and 22128. Pre-heat treatment of biomass in aqueous medium at 120°C for 1h followed by incubation in 2% (v/v) enzyme for 36 h at 45°C gave a maximum yield of sugar 206.82±14.96 mg/g. The fermentation of hydrolysate gave ethanol yield of 0.45 g/g reducing sugar accounting for 88.2% conversion efficiency. These values are substantially higher than those of reported so far for both agarophytes and carrageenophytes. It was also confirmed that enzyme can be used twice without compromising on the saccharification efficiency. The findings of this study reveal that Ulva can be a potential feedstock for bioethanol production.

Bacterial pathogens, virulence mechanism and host defence in marine macroalgae

Macroalgae are important ecosystem engineers in temperate marine waters. The function of macroalgae is intimately linked to the composition and structure of their epibiotic bacterial, communities, and evidence has emerged that bacteria can also have a negative impact on their host by causing disease. A few examples exist where bacteria have been unambiguously linked to macroalgal disease, however in many cases, pathogenicity has not been clearly separated from saprophytic behaviour or secondary colonization after disease initiation. Nevertheless, pathogenic pressure by bacteria might be substantial, as macroalgae have evolved a range of innate and induced defence mechanism that have the potential to control bacterial attacks. The presence and abundance of virulence factors in marine bacteria, which have not previously been recognized as pathogens, also represents an underappreciated, opportunistic potential for disease. Given that virulence expression in opportunistic pathogens is often dependent on environmental conditions, we predict that current and future anthropogenic changes in the marine environment will lead to an increase in the occurrence of macroalgal disease. This review highlights important areas of research that require future attention to understand the link between environmental change, opportunistic pathogens and macroalgal health in the world's oceans.

Pretreatment of macroalgae for volatile fatty acid production

In this study, a novel method was proposed for the biological pretreatment of macroalgae (Laminaria japonica, Pachymeniopsis elliptica, and Enteromorpha crinita) for production of volatile fatty acid (VFA) by anaerobic fermentation. The amount of VFA produced from 40 g/L of L. japonica increased from 8.3 g/L (control) to 15.6 g/L when it was biologically pretreated with Vibrio harveyi. The biological treatment of L. japonica with Vibrio spp. was most effective likely due to the alginate lyase activity of Vibrio spp. However, a considerable effect was also observed after biological pretreatment of P. elliptica and E. crinita, which are red and green algae, respectively. Alkaline pretreatment of 40 g/L of L. japonica with 0.5 N NaOH resulted in an increase of VFA production to 12.2 g/L. These results indicate that VFA production from macroalgae can be significantly enhanced using the proposed biological pretreatments.

Threats and knowledge gaps for ecosystem services provided by kelp forests: a northeast Atlantic perspective

Kelp forests along temperate and polar coastlines represent some of most diverse and productive habitats on the Earth. Here, we synthesize information from >60 years of research on the structure and functioning of kelp forest habitats in European waters, with particular emphasis on the coasts of UK and Ireland, which represents an important biogeographic transition zone that is subjected to multiple threats and stressors. We collated existing data on kelp distribution and abundance and reanalyzed these data to describe the structure of kelp forests along a spatial gradient spanning more than 10° of latitude. We then examined ecological goods and services provided by kelp forests, including elevated secondary production, nutrient cycling, energy capture and flow, coastal defense, direct applications, and biodiversity repositories, before discussing current and future threats posed to kelp forests and identifying key knowledge gaps. Recent evidence unequivocally demonstrates that the structure of kelp forests in the NE Atlantic is changing in response to climate- and non-climate-related stressors, which will have major implications for the structure and functioning of coastal ecosystems. However, kelp-dominated habitats along much of the NE Atlantic coastline have been chronically understudied over recent decades in comparison with other regions such as Australasia and North America. The paucity of field-based research currently impedes our ability to conserve and manage these important ecosystems. Targeted observational and experimental research conducted over large spatial and temporal scales is urgently needed to address these knowledge gaps.

Comparative characterization of two marine alginate lyases from Zobellia galactanivorans reveals distinct modes of action and exquisite adaptation to their natural substrate

Cell walls of brown algae are complex supramolecular assemblies containing various original, sulfated, and carboxylated polysaccharides. Among these, the major marine polysaccharide component, alginate, represents an important biomass that is successfully turned over by the heterotrophic marine bacteria. In the marine flavobacterium Zobellia galactanivorans, the catabolism and uptake of alginate are encoded by operon structures that resemble the typical Bacteroidetes polysaccharide utilization locus. The genome of Z. galactanivorans contains seven putative alginate lyase genes, five of which are localized within two clusters comprising additional carbohydrate-related genes. This study reports on the detailed biochemical and structural characterization of two of these. We demonstrate here that AlyA1PL7 is an endolytic guluronate lyase, and AlyA5 cleaves unsaturated units, α-L-guluronate or β-D-manuronate residues, at the nonreducing end of oligo-alginates in an exolytic fashion. Despite a common jelly roll-fold, these striking differences of the mode of action are explained by a distinct active site topology, an open cleft in AlyA1(PL7), whereas AlyA5 displays a pocket topology due to the presence of additional loops partially obstructing the catalytic groove. Finally, in contrast to PL7 alginate lyases from terrestrial bacteria, both enzymes proceed according to a calcium-dependent mechanism suggesting an exquisite adaptation to their natural substrate in the context of brown algal cell walls.

An improved method for oriT-directed cloning and functionalization of large bacterial genomic regions

We have made significant improvements to a broad-host-range system for the cloning and manipulation of large bacterial genomic regions based on site-specific recombination between directly repeated oriT sites during conjugation. Using two suicide capture vectors carrying flanking homology regions, oriT sites are recombined on either side of the target region. Using a broad-host-range conjugation helper plasmid, the region between the oriT sites is conjugated into an Escherichia coli recipient strain, where it is circularized and maintained as a chimeric mini-F vector. The cloned target region is functionalized in multiple ways to accommodate downstream manipulation. The target region is flanked with Gateway attB sites for recombination into other vectors and by rare 18-bp I-SceI restriction sites for subcloning. The Tn7-functionalized target can also be inserted at a naturally occurring chromosomal attTn7 site(s) or maintained as a broad-host-range plasmid for complementation or heterologous expression studies. We have used the oriTn7 capture technique to clone and complement Burkholderia pseudomallei genomic regions up to 140 kb in size and have created isogenic Burkholderia strains with various combinations of genomic islands. We believe this system will greatly aid the cloning and genetic analysis of genomic islands, biosynthetic gene clusters, and large open reading frames.

Bioethanol production from brown seaweed, Undaria pinnatifida, using NaCl acclimated yeast

Strain improvement of Pichia angophorae KCTC 17574 was successfully carried out for bioethanol fermentation of seaweed slurry with high salt concentration. P. angophorae KCTC 17574 was cultured under increasing salinity from five practical salinity unit (psu, ‰) to as high as 100 psu for 723 h. The seaweed, Undaria pinnatifida (sea mustard, Miyuk), was fermented to produce bioethanol using high-salt acclimated yeast. The pretreatment of U. pinnatifida was optimized using thermal acid hydrolysis to obtain a high monosaccharide yield. Optimal pretreatment conditions of 75 mM H(2)SO(4) and 13 % (w/v) slurry at 121 °C for 60 min were determined using response surface methodology. A maximum monosaccharide content of 28.65 g/L and the viscosity of 33.19 cP were obtained. The yeasts cultured under various salinity concentrations were collected and inoculated to the pretreated seaweed slurry after the neutralization using 5 N NaOH. The pretreated slurry was fermented with the inoculation of 0.1 g dcw/L of P. angophorae KCTC 17574 strain obtained at 90 psu. The maximum ethanol concentration of 9.42 g/L with 27 % yield of theoretical case of ethanol production from total carbohydrate of U. pinnatifida was obtained.

Selecting reliable and robust freshwater macroalgae for biomass applications

Intensive cultivation of freshwater macroalgae is likely to increase with the development of an algal biofuels industry and algal bioremediation. However, target freshwater macroalgae species suitable for large-scale intensive cultivation have not yet been identified. Therefore, as a first step to identifying target species, we compared the productivity, growth and biochemical composition of three species representative of key freshwater macroalgae genera across a range of cultivation conditions. We then selected a primary target species and assessed its competitive ability against other species over a range of stocking densities. Oedogonium had the highest productivity (8.0 g ash free dry weight m⁻² day⁻¹), lowest ash content (3–8%), lowest water content (fresh weigh: dry weight ratio of 3.4), highest carbon content (45%) and highest bioenergy potential (higher heating value 20 MJ/kg) compared to Cladophora and Spirogyra. The higher productivity of Oedogonium relative to Cladophora and Spirogyra was consistent when algae were cultured with and without the addition of CO₂ across three aeration treatments. Therefore, Oedogonium was selected as our primary target species. The competitive ability of Oedogonium was assessed by growing it in bi-cultures and polycultures with Cladophora and Spirogyra over a range of stocking densities. Cultures were initially stocked with equal proportions of each species, but after three weeks of growth the proportion of Oedogonium had increased to at least 96% (±7 S.E.) in Oedogonium-Spirogyra bi-cultures, 86% (±16 S.E.) in Oedogonium-Cladophora bi-cultures and 82% (±18 S.E.) in polycultures. The high productivity, bioenergy potential and competitive dominance of Oedogonium make this species an ideal freshwater macroalgal target for large-scale production and a valuable biomass source for bioenergy applications. These results demonstrate that freshwater macroalgae are thus far an under-utilised feedstock with much potential for biomass applications.

Hydrogen storage and evolution catalysed by metal hydride complexes

The storage and evolution of hydrogen are catalysed by appropriate metal hydride complexes. Hydrogenation of carbon dioxide by hydrogen is catalysed by a [C,N] cyclometalated organoiridium complex, [Ir(III)(Cp*)(4-(1H-pyrazol-1-yl-κN(2))benzoic acid-κC(3))(OH(2))](2)SO(4) [Ir-OH(2)](2)SO(4), under atmospheric pressure of H(2) and CO(2) in weakly basic water (pH 7.5) at room temperature. The reverse reaction, i.e., hydrogen evolution from formate, is also catalysed by [Ir-OH(2)](+) in acidic water (pH 2.8) at room temperature. Thus, interconversion between hydrogen and formic acid in water at ambient temperature and pressure has been achieved by using [Ir-OH(2)](+) as an efficient catalyst in both directions depending on pH. The Ir complex [Ir-OH(2)](+) also catalyses regioselective hydrogenation of the oxidised form of β-nicotinamide adenine dinucleotide (NAD(+)) to produce the 1,4-reduced form (NADH) under atmospheric pressure of H(2) at room temperature in weakly basic water. In weakly acidic water, the complex [Ir-OH(2)](+) also catalyses the reverse reaction, i.e., hydrogen evolution from NADH to produce NAD(+) at room temperature. Thus, interconversion between NADH (and H(+)) and NAD(+) (and H(2)) has also been achieved by using [Ir-OH(2)](+) as an efficient catalyst and by changing pH. The iridium hydride complex formed by the reduction of [Ir-OH(2)](+) by H(2) and NADH is responsible for the hydrogen evolution. Photoirradiation (λ > 330 nm) of an aqueous solution of the Ir-hydride complex produced by the reduction of [Ir-OH(2)](+) with alcohols resulted in the quantitative conversion to a unique [C,C] cyclometalated Ir-hydride complex, which can catalyse hydrogen evolution from alcohols in a basic aqueous solution (pH 11.9). The catalytic mechanisms of the hydrogen storage and evolution are discussed by focusing on the reactivity of Ir-hydride complexes.

Microbial synthesis of n-butanol, isobutanol, and other higher alcohols from diverse resources

Microbial production of fuel and chemical feedstock is a promising approach to solving energy and environmental problems. n-Butanol, isobutanol and other higher alcohols are of particular interest because they can serve as both fuel and chemical feedstock. Alternative resources such as CO2, syngas, waste protein, and lignocellulose are currently being investigated for their potential to produce these compounds. Except for lignocellulose, utilization of such alternative resource has not been examined extensively. This review aims to summarize the development of metabolic pathways for efficient synthesis of these higher alcohols and the current status of microbial strain development for the conversion of diverse resources into higher alcohols.

Bioethanol production from Gracilaria verrucosa, a red alga, in a biorefinery approach

In this study, Gracilaria verrucosa, red seaweed has been used for production of agar and bioethanol. The algae harvested at various time durations resulted in extraction of ~27-33% agar. The leftover pulp was found to contain ~62-68% holocellulose, which on enzymatic hydrolysis yielded 0.87 g sugars/g cellulose. The enzymatic hydrolysate on fermentation with Saccharomyces cerevisiae produced ethanol with an ethanol yield of 0.43 g/g sugars. The mass balance evaluation of the complete process demonstrates that developing biorefinery approach for exploiting Gracilaria verrucosa, a red alga, could be commercially viable.

Petrodiesel-like straight chain alkane and fatty alcohol production by the microalga Chlorella sorokiniana

This study was to investigate the composition and characteristics of long-straight chain alkane and fatty alcohols from the microalga Chlorella Sorokiniana 21, isolated from the coastal water of Pearl River Delta, China. Under the optimized aeration growth condition, this strain yielded up to 1.44 g L(-1) biomass and 24.90% extracts of dry weight. The major compounds of the extracts were identified to be alkanes (35.93%) and alcohols (53.73%). Of the extracts, long-straight chain alkanes accounted for 30.54% with heptadecane (21.13%) as a predominant component. Furthermore, a large amount of fatty alcohols (53.73%) were identified in the algal extracts with 29.09% of 3-(2-methoxyethyl)-1-nonanol. Thus, this algal species is a promising feedstock for the production of supplement for petrodiesel-like fuels and biochemicals used in the cosmetics and food industries. This study represents the first report of long-straight chain alkane and fatty alcohols from microalgae isolated from coastal water of the region.