Identification of polyphosphate-accumulating organisms and design of 16S rRNA-directed probes for their detection and quantitation

Identification, detection, and spatial resolution of Clostridium populations responsible for cellulose degradation in a methanogenic landfill leachate bioreactor

An anaerobic landfill leachate bioreactor was operated with crystalline cellulose and sterile landfill leachate until a steady state was reached. Cellulose hydrolysis, acidogenesis, and methanogenesis were measured. Microorganisms attached to the cellulose surfaces were hypothesized to be the cellulose hydrolyzers. 16S rRNA gene clone libraries were prepared from this attached fraction and also from the mixed fraction (biomass associated with cellulose particles and in the planktonic phase). Both clone libraries were dominated by Firmicutes phylum sequences (100% of the attached library and 90% of the mixed library), and the majority fell into one of five lineages of the clostridia. Clone group 1 (most closely related to Clostridium stercorarium), clone group 2 (most closely related to Clostridium thermocellum), and clone group 5 (most closely related to Bacteroides cellulosolvens) comprised sequences in Clostridium group III. Clone group 3 sequences were in Clostridium group XIVa (most closely related to Clostridium sp. strain XB90). Clone group 4 sequences were affiliated with a deeply branching clostridial lineage peripherally associated with Clostridium group VI. This monophyletic group comprises a new Clostridium cluster, designated cluster VIa. Specific fluorescence in situ hybridization (FISH) probes for the five groups were designed and synthesized, and it was demonstrated in FISH experiments that bacteria targeted by the probes for clone groups 1, 2, 4, and 5 were very abundant on the surfaces of the cellulose particles and likely the key cellulolytic microorganisms in the landfill bioreactor. The FISH probe for clone group 3 targeted cells in the planktonic phase, and these organisms were hypothesized to be glucose fermenters.

Bulking sludge in biological nutrient removal systems

Bulking sludge problems are commonly reported in biological nutrient removal (BNR) systems. This has led to the general belief that intrinsic BNR conditions favor the growth of undesirable and excessive filamentous bacteria. The present study shows that other factors have a major role in bulking, and not the BNR conditions. These factors have been verified in well-controlled, strictly anoxic-aerobic and strictly anaerobic-aerobic sequencing batch reactor systems. The experimental results show that conditions known to be responsible for bulking sludge in aerobic systems (i.e., low concentration of electron donor and/or electron acceptor) did not lead to bulking. Even when acetate was present at very low concentrations in the aerobic stage of an anaerobic-aerobic bio-P system, the sludge settleability remained very good. This clearly demonstrates that good bio-P activity can stabilize and improve sludge settleability. The presence of microaerophilic conditions in the anoxic stage of the anoxic-aerobic system was the only factor leading to worsening sludge settling characteristics. The results are discussed in light of our previous hypothesis about the importance of diffusion-limited substrate uptake for the development of filamentous structures in biological flocs. The hypothesis is extended to anaerobic-aerobic and anoxic-aerobic conditions, typical of BNR-activated sludge systems. Taking into account the effect of feeding patterns on biochemical rates and on the development of filamentous bacterial structures, we recommend the adoption of plug-flow selector configurations, with strictly anaerobic and/or strictly anoxic conditions, wherein microaerophilic conditions are excluded, in order to maintain reliable and robust BNR performance.

Impacts of structural characteristics on activated sludge floc stability

Activated sludge samples from seven full-scale plants were investigated in order to determine the relationship between floc structure and floc stability. Floc stability was determined by shear sensitivity and floc strength. Floc structure was considered in terms of two size scales, the micro- and macrostructure. The microstructure refers to the organization of the floc components, such as the individual microorganisms. The macrostructure refers to the overall floc. The floc macrostructure was characterized by filament index, sludge volume index, size, and fractal dimension. It had a significant impact on floc stability. Large and open flocs with low fractal dimensions containing large number of filaments were more shear sensitive and had lower floc strength compared to small and dense flocs. Fluorescent in situ hybridization analysis indicated that the organization of the bacterial cells might also have an effect on the floc stability.

Model-based analysis of anaerobic acetate uptake by a mixed culture of polyphosphate-accumulating and glycogen-accumulating organisms

An increasing number of studies shows that the glycogen-accumulating organisms (GAOs) can survive and may indeed proliferate under the alternating anaerobic/aerobic conditions found in EBPR systems, thus forming a strong competitor of the polyphosphate-accumulating organisms (PAOs). Understanding their behaviors in a mixed PAO and GAO culture under various operational conditions is essential for developing operating strategies that disadvantage the growth of this group of unwanted organisms. A model-based data analysis method is developed in this paper for the study of the anaerobic PAO and GAO activities in a mixed PAO and GAO culture. The method primarily makes use of the hydrogen ion production rate and the carbon dioxide transfer rate resulting from the acetate uptake processes by PAOs and GAOs, measured with a recently developed titration and off-gas analysis (TOGA) sensor. The method is demonstrated using the data from a laboratory-scale sequencing batch reactor (SBR) operated under alternating anaerobic and aerobic conditions. The data analysis using the proposed method strongly indicates a coexistence of PAOs and GAOs in the system, which was independently confirmed by fluorescent in situ hybridization (FISH) measurement. The model-based analysis also allowed the identification of the respective acetate uptake rates by PAOs and GAOs, along with a number of kinetic and stoichiometric parameters involved in the PAO and GAO models. The excellent fit between the model predictions and the experimental data not involved in parameter identification shows that the parameter values found are reliable and accurate. It also demonstrates that the current anaerobic PAO and GAO models are able to accurately characterize the PAO/GAO mixed culture obtained in this study. This is of major importance as no pure culture of either PAOs or GAOs has been reported to date, and hence the current PAO and GAO models were developed for the interpretation of experimental results of mixed cultures. The proposed method is readily applicable for detailed investigations of the competition between PAOs and GAOs in enriched cultures. However, the fermentation of organic substrates carried out by ordinary heterotrophs needs to be accounted for when the method is applied to the study of PAO and GAO competition in full-scale sludges.

Conventional morphological and functional evaluation of the microbial populations in a sequencing batch reactor performing EBPR

To help confirm and interpret the Enhanced Biological Phosphorus Removal (EBPR) performance of the microbial populations in a laboratory-scale activated sludge (AS) system, conventional microscopic examinations were carried out. A lab-scale sequencing batch reactor (SBR), named ARC, was fed with acetate, as the sole carbon source, and operated for EBPR. Daily monitoring and cyclic behavior evaluation studies indicated that the system always worked for EBPR in the long run, with efficiencies depending on the influent characteristics and operational stability. Poly-P and PHB-staining experiments revealed that the enriched biomass of the reactor was quite diverse in terms of morphology, hosting populations of traditional rod-shaped PAOs, tetrad/sarcina-like cells (referred here as TFOs, rather than GAOs), diplococci-shaped cells, and staphylococci-like clustered populations, in addition to few filaments. Although the microscopic observations were qualitative, rather than quantitative, they seemed likely to correlate well to the biochemical performance of the reactor.

Identification and comparison of aerobic and denitrifying polyphosphate-accumulating organisms

Two laboratory-scale sequencing batch reactors (SBRs) were operated for enhanced biological phosphorus removal (EBPR) in alternating anaerobic-aerobic or alternating anaerobic-anoxic modes, respectively. Polyphosphate-accumulating organisms (PAOs) were enriched in the anaerobic-aerobic SBR and denitrifying PAOs (DPAOs) were enriched in the anaerobic-aerobic SBR. Fluorescence in situ hybridization (FISH) demonstrated that the well-known PAO, "Candidatus Accumulibacter phosphatis" was abundant in both SBRs, and post-FISH chemical staining with 4,6-diamidino-2-phenylindol (DAPI) confirmed that they accumulated polyphosphate. When the anaerobic-anoxic SBR enriched for DPAOs was converted to anaerobic-aerobic operation, aerobic uptake of phosphorus by the resident microbial community occurred immediately. However, when the anaerobic-aerobic SBR enriched for PAOs was exposed to one cycle with anoxic rather than aerobic conditions, a 5-h lag period elapsed before phosphorus uptake proceeded. This anoxic phosphorus-uptake lag phase was not observed in the subsequent anaerobic-aerobic cycle. These results demonstrate that the PAOs that dominated the anaerobic-aerobic SBR biomass were the same organisms as the DPAOs enriched under anaerobic-anoxic conditions.

The characteristics of the bacterial community structure and population dynamics for phosphorus removal in SBR activated sludge processes

The characteristics of the bacterial community structure and population dynamics for phosphorus removal in activated sludge were investigated using laboratory-scale sequencing batch reactor (SBR) activated sludge processes fed with four different carbon sources. Phosphorus removal activity, quinone profile of the activated sludge and isolated bacterial strains were monitored. An enhanced phosphorus removal activity was accompanied by the increase in ubiquinone-9 (Q-9). The relationships between phosphorus removal activity and Q-9 contents of the isolated bacterial strains were dependent neither on the organic substrates nor on the species of isolated bacterial strains. The enhanced phosphorus removal capability of activated sludge seemed to be due to the increase in the populations of bacteria with activity of phosphorus removal, i.e. species succession of bacteria in activated sludge ecosystems, rather than the increase in the phosphorus removal capability of phosphorus removal bacteria. Not only Acinetobacter but also Pseudomonas identified from isolated strains were regarded as representative polyphosphates-accumulating organisms and predominant species to the whole of bacterial population in activated sludge for phosphorus removal.

Molecular characterization of the microbial community structure in two activated sludge systems for the advanced treatment of domestic effluents

Although activated sludge systems with enhanced biological phosphorus removal (EBPR) represent state-of-the-art technology for phosphate removal from wastewater it is still unknown which species of bacteria are responsible for the EBPR process. The aim of this study was to compare the bacterial composition of activated sludge from two laboratory plants with different modes of operation, anoxic/oxic- (EBPR, no nitrification) and Phoredox-system (EBPR, nitrification and denitrification) with particular emphasis on microorganisms responsible for EBPR process. In addition to fluorescence in situ hybridization (FISH), we applied further rRNA-based molecular techniques like terminal restriction-fragment length polymorphism analysis and comparative 16S rDNA analysis to yield additional information and to verify the results from FISH analysis, like e.g. for the identification of polyphosphate accumulating organisms (PAO). Despite the different modes of operation only minor differences in the bacterial composition were detected by FISH analysis based on the probes used in this study. In contrast T-RFLP analysis yielded characteristic community fingerprints for each of the investigated plants and comparative 16S rDNA analysis indicated highly diverse microbial communities in both plants suggesting substantial differences in the microbial structure. The results obtained by FISH analysis with specific probes for PAOs support the presumption that not only one specific organism is responsible for the EBPR. In our case Tetrasphaera spp. dominated the PAO community, but other possible PAOs, like Microlunatus spp. and members of the Rhodocyclus group, were also detected.

Candidate division BD: phylogeny, distribution and abundance in soil ecosystems

Oligonucleotide primers were designed and used to amplify partial 16S rDNA sequences of the recently identified bacterial group BD from four diverse soils. Phylogenetic analysis of 34 BD group sequences supports division-level status for the group and also indicates that the BD group consists of at least 3 subdivision-level groups. Sequence divergence (21%) amongst these BD group sequences was found to be near the average for bacterial division-level lineages. An intercalating dye-based quantitative PCR (qPCR) assay was used to quantify BD phylogenetic group 3 16S rDNA in Wyoming shortgrass steppe soils. Although BD phylogenetic group 3 16S rDNA sequence numbers were high, averaging 3 x 10(8) copies per g soil, no significant correlations were found between their abundance and soil organic matter content, inorganic N concentration, or pH. Based on microscopically estimated cell numbers and the range of rRNA operons per genome in the bacterial domain, we estimate that BD group 3 represents between 0.75% and 10.7% of the microbial population in a shortgrass steppe soil. Our results indicate that the BD group is widely distributed in the environment and present in significant numbers in Wyoming shortgrass steppe soils.

Long-term population dynamics and in situ physiology in activated sludge systems with enhanced biological phosphorus removal operated with and without nitrogen removal

Quantitative fluorescence in situ hybridization (FISH) and the combination of FISH with microautoradiography (MAR) were used in order to study the long-term population dynamics (2.5 years) and the in situ physiology in two parallel activated sludge pilot systems with enhanced biological phosphorus removal (EBPR). The two systems received the same influent wastewater, but were differently operated (with and without nitrogen removal, respectively). Both systems showed a significant P removal that increased when different substrates (phosphorus (P), acetate and glucose, respectively) were added to the influent wastewater. Rhodocyclus-related bacteria were present in both systems in significant numbers (ranging from 4 to 28%) throughout the whole period. This supports the hypothesis that these bacteria occur in significant numbers in different types of well-operating EBPR activated sludge processes. However, we observed a lower correlation (< 0.5) for the amount of Rhodocyclus-related bacteria to the P content in activated sludge than previous studies (> 0.9). The Actinobacteria were the only additional group of bacteria which showed a similar degree of correlation to the P content in activated sludge as the Rhodocyclus-related bacteria--but only for the system without nitrogen removal. Significant amounts (< or = 12%) of glycogen-accumulating bacteria (GAOs) were detected in the system with nitrogen removal (but not in the other system), but had no, in contrast to previous observations, apparent negative effect on the overall EBPR performance. FISH-MAR indicated that a significant part of the Betaproteobacteria (part of them identified as Rhodocyclus-related bacteria) as well as the Actinobacteria were able to take up 33Pi, [3H]-acetate and [3H]-glucose under anaerobic-aerobic conditions. The contribution of anoxic 33Pi uptake under alternating anaerobic-anoxic conditions was significantly lower. Interestingly, not all Rhodocyclus-related bacteria showed uptake of these three radioactive substrates. This may be due to differences in metabolic state, physiological potential or genotype, not detectable by the present probe set for Rhodocyclus-related bacteria. Comparison of the 33Pi, [3H]-acetate and [3H]-glucose uptake by activated sludge after different fixation and incubation procedures showed that a part of the observed 33Pi uptake may have been caused by a combination of a biological and chemical or biologically induced chemical P adsorption.

Microbial communities in activated sludge performing enhanced biological phosphorus removal in a sequencing batch reactor

Microbial communities of activated sludge in an anaerobic/aerobic sequencing batch reactor (SBR) supplied with acetate as sole carbon source were analyzed to identify the microorganisms responsible for enhanced biological phosphorus removal. Various analytical methods were used such as electron microscopy, quinone, slot hybridization, and 16S rRNA gene sequencing analyses. Electron photomicrographs showed that coccus-shaped microorganisms of about 1 microm diameter dominated the microbial communities of the activated sludge in the SBR, which had been operated for more than 18 months. These microorganisms contained polyphosphate granules and glycogen inclusions, which suggests that they are a type of phosphorus-accumulating organism. Quinones, slot hybridization, and 16S rRNA sequencing analyses showed that the members of the Proteobacteria beta subclass were the most abundant species and were affiliated with the Rhodocyclus-like group. Phylogenetic analysis revealed that the two dominating clones of the beta subclass were closely related to the Rhodocyclus-like group. It was concluded that the coccus-shaped organisms related to the Rhodocyclus-like group within the Proteobacteria beta subclass were the most dominant species believed responsible for biological phosphorus removal in SBR operation with acetate.

Limitations of the widely used GAM42a and BET42a probes targeting bacteria in the Gammaproteobacteria radiation

The 23S rRNA-targeted probes GAM42a and BET42a provided equivocal results with the uncultured gammaproteobacterium 'Candidatus Competibacter phosphatis' where some cells bound GAM42a and other cells bound BET42a in fluorescence in situ hybridization (FISH) experiments. Probes GAM42a and BET42a span positions 1027-1043 in the 23S rRNA and differ from each other by one nucleotide at position 1033. Clone libraries were prepared from PCR products spanning the 16S rRNA genes, intergenic spacer region and 23S rRNA genes from two mixed cultures enriched in 'Candidatus C. phosphatis'. With individual clone inserts, the 16S rDNA portion was used to confirm the source organism as 'Candidatus C. phosphatis' and the 23S rDNA portion was used to determine the sequence of the GAM42a/BET42a probe target region. Of the 19 clones sequenced, 8 had the GAM42a probe target (T at position 1033) and 11 had G at position 1033, the only mismatch with GAM42a. However, none of the clones had the BET42a probe target (A at 1033). Non-canonical base-pairing between the 23S rRNA of 'Candidatus C. phosphatis' with G at position 1033 and GAM42a (G-A) or BET42a (G-T) is likely to explain the probing anomalies. A probe (GAM42_C1033) was optimized for use in FISH, targeting cells with G at position 1033, and was found to highlight not only some 'Candidatus C. phosphatis' cells, but also other bacteria. This demonstrates that there are bacteria in addition to 'Candidatus C. phosphatis' with the GAM42_C1033 probe target and not the BET42a or GAM42a probe target.

The microbiology of biological phosphorus removal in activated sludge systems

Activated sludge systems are designed and operated globally to remove phosphorus microbiologically, a process called enhanced biological phosphorus removal (EBPR). Yet little is still known about the ecology of EBPR processes, the microbes involved, their functions there and the possible reasons why they often perform unreliably. The application of rRNA-based methods to analyze EBPR community structure has changed dramatically our understanding of the microbial populations responsible for EBPR, but many substantial gaps in our knowledge of the population dynamics of EBPR and its underlying mechanisms remain. This review critically examines what we once thought we knew about the microbial ecology of EBPR, what we think we now know, and what still needs to be elucidated before these processes can be operated and controlled more reliably than is currently possible. It looks at the history of EBPR, the currently available biochemical models, the structure of the microbial communities found in EBPR systems, possible identities of the bacteria responsible, and the evidence why these systems might operate suboptimally. The review stresses the need to extend what have been predominantly laboratory-based studies to full-scale operating plants. It aims to encourage microbiologists and process engineers to collaborate more closely and to bring an interdisciplinary approach to bear on this complex ecosystem.

Enhanced biological phosphorus removal in a sequencing batch reactor using propionate as the sole carbon source

An enhanced biological phosphorus removal (EBPR) system was developed in a sequencing batch reactor (SBR) using propionate as the sole carbon source. The microbial community was followed using fluorescence in situ hybridization (FISH) techniques and Candidatus 'Accumulibacter phosphatis' were quantified from the start up of the reactor until steady state. A series of SBR cycle studies was performed when 55% of the SBR biomass was Accumulibacter, a confirmed polyphosphate accumulating organism (PAO) and when Candidatus 'Competibacter phosphatis', a confirmed glycogen-accumulating organism (GAO), was essentially undetectable. These experiments evaluated two different carbon sources (propionate and acetate), and in every case, two different P-release rates were detected. The highest rate took place while there was volatile fatty acid (VFA) in the mixed liquor, and after the VFA was depleted a second P-release rate was observed. This second rate was very similar to the one detected in experiments performed without added VFA.A kinetic and stoichiometric model developed as a modification of Activated Sludge Model 2 (ASM2) including glycogen economy, was fitted to the experimental profiles. The validation and calibration of this model was carried out with the cycle study experiments performed using both VFAs. The effect of pH from 6.5 to 8.0 on anaerobic P-release and VFA-uptake and aerobic P-uptake was also studied using propionate. The optimal overall working pH was around 7.5. This is the first study of the microbial community involved in EBPR developed with propionate as a sole carbon source along with detailed process performance investigations of the propionate-utilizing PAOs.

Metabolic pathway for propionate utilization by phosphorus-accumulating organisms in activated sludge: 13C labeling and in vivo nuclear magnetic resonance

In vivo 13C and 31P nuclear magnetic resonance techniques were used to study propionate metabolism by activated sludge in enhanced biological phosphorus removal systems. The fate of label supplied in [3-13C]propionate was monitored in living cells subjected to anaerobic/aerobic cycles. During the anaerobic phase, propionate was converted to polyhydroxyalkanoates (PHA) with the following monomer composition: hydroxyvalerate, 74.2%; hydroxymethylvalerate, 16.9%; hydroxymethylbutyrate, 8.6%; and hydroxybutyrate, 0.3%. The isotopic enrichment in the different carbon atoms of hydroxyvalerate (HV) produced during the first anaerobic stage was determined: HV5, 59%; HV4, 5.0%; HV3, 1.1%; HV2, 3.5%; and HV1, 2.8%. A large proportion of the supplied label ended up on carbon C-5 of HV, directly derived from the pool of propionyl-coenzyme A (CoA), which is primarily labeled on C-3; useful information on the nature of operating metabolic pathways was provided by the extent of labeling on C-1, C-2, and C-4. The labeling pattern on C-1 and C-2 was explained by the conversion of propionyl-CoA to acetyl-CoA via succinyl-CoA and the left branch of the tricarboxylic acid cycle, which involves scrambling of label between the inner carbons of succinate. This constitutes solid evidence for the operation of succinate dehydrogenase under anaerobic conditions. The labeling in HV4 is explained by backflux from succinate to propionyl-CoA. The involvement of glycogen in the metabolism of propionate was also demonstrated; moreover, it was shown that the acetyl moiety to the synthesis of PHA was derived preferentially from glycogen. According to the proposed metabolic scheme, the decarboxylation of pyruvate is coupled to the production of hydrogen, and the missing reducing equivalents should be derived from a source other than glycogen metabolism.

High bacterial diversity of a waste gas-degrading community in an industrial biofilter as shown by a 16S rDNA clone library

The bacterial diversity of an industrial biofilter used for waste gas abatement in an animal-rendering plant was investigated. A 16S rDNA clone library was generated and 444 clones were screened using computer-aided amplified ribosomal DNA restriction analysis (ARDRA). Of the screened clones, 60.8% showed unique ARDRA patterns and the remaining 174 clones were clustered into 65 groups. Almost full-length 16S rDNA sequences of 106 clones were determined and 90.5% of the clones were affiliated with the two phyla Proteobacteria and Bacteroidetes. Alpha-, Beta-, and Gammaproteobacteria accounted for 22.1, 17.6 and 18.6% respectively. Minor portions were affiliated with the Actinobacteria (2.0%), Firmicutes and Verrucomicrobia (both 1.0%), and the Deltaproteobacteria and Thermomicrobia (each 0.5%). Only six out of the 106 16S rDNA sequences exhibited similarities of more than 97% to classified bacterial species indicating that a substantial fraction of the clone sequences were derived from unknown taxa. It was also evaluated whether a database containing 281 computer-simulated bacterial rDNA fragment patterns generated from published reference sequences can be used for identification purposes. The data analysis demonstrated that this was possible only for a small number of clones, which were closely related to described bacterial strains. Rarefaction analysis of ARDRA clusters demonstrated that the 444 clones screened are insufficient to describe the entire diversity of the clone library.

Hydrogenotrophic denitrification in a microporous membrane bioreactor

Hydrogenotrophic denitrification of nitrate contaminated groundwater in a bench-scale microporous membrane bioreactor has been investigated. To prevent microbial contamination of the effluent from the reactor the nitrate-laden water treated was separated from the denitrifying culture with a 0.02 microm pore diameter membrane. Equal pressure was maintained across the membrane and nitrate was removed by molecular diffusion through the membrane and into the denitrifying culture. The system was operated with a hydrogenotrophic denitrification culture to circumvent the addition of an organic substrate to the water. Removal efficiencies ranging from 96% to 92% were achieved at influent concentrations ranging from 20 to 40 mg/L NO3(-)-N. The flux values achieved in this study were 2.7-5.3 g NO3-N m 2d(-1). The microporous membrane served as an effective barrier for preventing microbial contamination of the product water as evidenced by the effluent heterotrophic plate count of 9 (+/- 3.5) CFU/mL. The hydrogenotrophic culture was analyzed using available 16S and 23S rRNA-targeted oligonucleotide probes. It was determined that the enrichment process selected for organisms belonging to the beta subclass of Proteobacteria. Further analysis of the hydrogenotrophic culture indicated that the organisms may belong to the beta-3 subgroup of Proteobacteria and have yet to be identified as hydrogenotrophic denitrifiers.

Glycogen-accumulating organisms in laboratory-scale and full-scale wastewater treatment processes

Laboratory-scale sequencing batch reactors (SBRs) as models for wastewater treatment processes were used to identify glycogen-accumulating organisms (GAOs), which are thought to be responsible for the deterioration of enhanced biological phosphorus removal (EBPR). The SBRs (called Q and T), operated under alternating anaerobic-aerobic conditions typical for EBPR, generated mixed microbial communities (sludges) demonstrating the GAO phenotype. Intracellular glycogen and poly-beta-hydroxyalkanoate (PHA) transformations typical of efficient EBPR occurred but polyphosphate was not bioaccumulated and the sludges contained 1.8% P (sludge Q) and 1.5% P (sludge T). 16S rDNA clone libraries were prepared from DNA extracted from the Q and T sludges. Clone inserts were grouped into operational taxonomic units (OTUs) by restriction fragment length polymorphism banding profiles. OTU representatives were sequenced and phylogenetically analysed. The Q sludge library comprised four OTUs and all six determined sequences were 99.7% identical, forming a cluster in the gamma-Proteobacteria radiation. The T sludge library comprised eight OTUs and the majority of clones were Acidobacteria subphylum 4 (49% of the library) and candidate phylum OP10 (39% of the library). One OTU (two clones, of which one was sequenced) was in the gamma-Proteobacteria radiation with 95% sequence identity to the Q sludge clones. Oligonucleotide probes (called GAOQ431 and GAOQ989) were designed from the gamma-Proteobacteria clone sequences for use in fluorescence in situ hybridization (FISH); 92% of the Q sludge bacteria and 28% of the T sludge bacteria bound these probes in FISH. FISH and post-FISH chemical staining for PHA were used to determine that bacteria from a novel gamma-Proteobacteria cluster were phenotypically GAOs in one laboratory-scale SBR and two full-scale wastewater treatment plants. It is suggested that the GAOs from the novel cluster in the gamma-Proteobacteria radiation be named 'Candidatus Competibacter phosphatis'.

Polyphosphate kinase from activated sludge performing enhanced biological phosphorus removal

A novel polyphosphate kinase (PPK) was retrieved from an uncultivated organism in activated sludge carrying out enhanced biological phosphorus removal (EBPR). Acetate-fed laboratory-scale sequencing batch reactors were used to maintain sludge with a high phosphorus content (approximately 11% of the biomass). PCR-based clone libraries of small subunit rRNA genes and fluorescent in situ hybridization (FISH) were used to verify that the sludge was enriched in Rhodocyclus-like beta-Proteobacteria known to be associated with sludges carrying out EBPR. These organisms comprised approximately 80% of total bacteria in the sludge, as assessed by FISH. Degenerate PCR primers were designed to retrieve fragments of putative ppk genes from a pure culture of Rhodocyclus tenuis and from organisms in the sludge. Four novel ppk homologs were found in the sludge, and two of these (types I and II) shared a high degree of amino acid similarity with R. tenuis PPK (86 and 87% similarity, respectively). Dot blot analysis of total RNA extracted from sludge demonstrated that the Type I ppk mRNA was present, indicating that this gene is expressed during EBPR. Inverse PCR was used to obtain the full Type I sequence from sludge DNA, and a full-length PPK was cloned, overexpressed, and purified to near homogeneity. The purified PPK has a specific activity comparable to that of other PPKs, has a requirement for Mg(2+), and does not appear to operate in reverse. PPK activity was found mainly in the particulate fraction of lysed sludge microorganisms.

Analysis of the microbial community structure and function of a laboratory scale enhanced biological phosphorus removal reactor

A laboratory scale sequencing batch reactor (SBR) operating for enhanced biological phosphorus removal (EBPR) and fed with a mixture of volatile fatty acids (VFAs) showed stable and efficient EBPR capacity over a four-year-period. Phosphorus (P), poly-beta-hydroxyalkanoate (PHA) and glycogen cycling consistent with classical anaerobic/aerobic EBPR were demonstrated with the order of anaerobic VFA uptake being propionate, acetate then butyrate. The SBR was operated without pH control and 63.67 +/- 13.86 mg P l-1 was released anaerobically. The P% of the sludge fluctuated between 6% and 10% over the operating period (average of 8.04 +/- 1.31%). Four main morphological types of floc-forming bacteria were observed in the sludge during one year of in-tensive microscopic observation. Two of them were mainly responsible for anaerobic/aerobic P and PHA transformations. Fluorescence in situ hybridization (FISH) and post-FISH chemical staining for intracellular polyphosphate and PHA were used to determine that 'Candidatus Accumulibacter phosphatis' was the most abundant polyphosphate accumulating organism (PAO), forming large clusters of coccobacilli (1.0-1.5 micro m) and comprising 53% of the sludge bacteria. Also by these methods, large coccobacillus-shaped gammaproteobacteria (2.5-3.5 micro m) from a recently described novel cluster were glycogen-accumulating organisms (GAOs) comprising 13% of the bacteria. Tetrad-forming organisms (TFOs) consistent with the 'G bacterium' morphotype were alphaproteobacteria, but not Amaricoccus spp., and comprised 25% of all bacteria. According to chemical staining, TFOs were occasionally able to store PHA anaerobically and utilize it aerobically.

Methods for detection and visualization of intracellular polymers stored by polyphosphate-accumulating microorganisms

Polyphosphate-accumulating microorganisms (PAOs) are important in enhanced biological phosphorus (P) removal. Considerable effort has been devoted to understanding the biochemical nature of enhanced biological phosphorus removal (EBPR) and it has been shown that intracellular polymer storage plays an important role in PAO's metabolism. The storage capacity of PAOs gives them a competitive advantage over other microorganisms present that are not able to accumulate internal reserves. Intracellular polymers stored by PAOs include polyphosphate (poly-P), polyhydroxyalkanoates (PHAs) and glycogen. Staining procedures for qualitative visualization of polymers by optical microscopy and combinations of these procedures with molecular tools for in situ identification are described here. The strengths and weaknesses of widely used polymer quantification methods that require destruction of samples, are also discussed. Finally, the potential of in vivo nuclear magnetic resonance (NMR) spectroscopy for on-line measurement of intracellular reserves is reported.

Functional analysis of microbial communities in aerobic-anaerobic sequencing batch reactors fed with different phosphorus/carbon (P/C) ratios

Fluorescence in situ hybridization (FISH) was used to analyse the community composition of a sequencing batch reactor (SBR) operating with aerobic-anaerobic cycling and fed acetate as its sole carbon source. Phosphorus was removed from the SBR microbiologically. Marked shifts in the community structure occurred as the phosphorus/carbon (P/C) ratio in the feed was changed. When the P/C ratio was shifted from 1:10 to 1:50, FISH analysis showed that the percentage of beta-Proteobacteria fell from ca 77% of the total bacteria to ca 38%. This decrease in the beta-Proteobacteria coincided with a reduction in both the proportions of the beta-proteobacterial Rhodocyclus-related phosphorus-accumulating bacteria and the biomass phosphorus content. FISH/microautoradiography and FISH/poly beta-hydroxyalkanoate (PHA) staining showed that the Rhodocyclus-related bacteria assimilated acetate and synthesized PHAs anaerobically, and that they accumulated phosphorus aerobically. No Acinetobacter spp. could be detected in any of the communities, casting further doubt on their role in phosphorus-removing activated sludge systems. As the feed P/C ratio decreased there was a corresponding increase in the proportion of alpha-Proteobacteria and, to a smaller extent, in the proportion of gamma-Proteobacteria; both the alpha- and gamma-Proteobacteria consisted mostly of tetrad-forming cocci, fitting the description of the so-called 'G-bacteria' morphotype. The change in the proportions of Proteobacteria present paralleled increases in the biomass glycogen content. Both the alpha- and beta-proteobacterial 'G-bacterial' populations assimilated acetate and synthesized PHA anaerobically. The alpha-Proteobacteria are considered responsible for glycogen production in these SBR systems.

Filamentous Chloroflexi (green non-sulfur bacteria) are abundant in wastewater treatment processes with biological nutrient removal

Most filamentous bacteria in biological nutrient removal (BNR) processes have not been identified beyond their morphotype and simple staining reactions. Furthermore, the majority of sludge filaments observed under the microscope do not hybridize to commonly used phylogenetic probes for well characterized bacterial phyla such as the Proteobacteria, Actinobacteria, Firmicutes and BACTEROIDETES: Specific 16S rRNA-targeted oligonucleotide probes were designed for the phylum Chloroflexi (green non-sulfur bacteria) and optimized for use in fluorescence in situ hybridization. Chloroflexi have been implicated in BNR systems by phylogenetic identification of filamentous bacteria isolated by micromanipulation from sludge and culture-independent molecular phylogenetic surveys. The predominant morphotype responding to the probes was filamentous and these filaments were generally abundant in 10 Australian full-scale and two laboratory-scale BNR samples examined. Filamentous bacteria responding to a subdivision 1 Chloroflexi probe were rare in the samples, whereas subdivision 3 Chloroflexi filaments were very common in some sludges. This is in direct contrast to results obtained from molecular phylogenetic surveys of BNR systems where most sludge 16S rDNA clones belong to subdivision 1 and only a few to subdivision 3. It is suggested that filamentous bacteria belonging to the Chloroflexi phylum account for a large fraction of phylogenetically uncharacterized filaments in BNR systems and are likely to be abundant in such systems on a global scale.

Characterization of an acetate-degrading sludge without intracellular accumulation of polyphosphate and glycogen

A sequencing batch reactor (SBR) was operated in the conventional anaerobic-aerobic mode for enhanced biological phosphate removal (EBPR) using acetate as the sole substrate. Results showed that, however, the reactor was unable to remove phosphate from wastewater. The sludge containing 1.65% of phosphate did not exhibit the typical characteristics of polyphosphate-accumulating organisms (PAO) or glycogen-accumulating organisms (GAO). Phylogenetic analysis, based on 16S rDNA sequences of individual microorganisms, showed that the microbial community of this acetate-degrading sludge was closely related to Comamonas testosteroni (43.8% of total population) of beta-1-proteobacteria, Zoogloea resiniphila (25.0%) of beta-2-proteobacteria, and Xanthomonas maltophilia (19.8%) of gamma-proteobacteria. Results of this study imply that GAO might not be the sole group of bacteria responsible to the deterioration of phosphate removal efficiency in an EBPR reactor.

Involvement of Rhodocyclus-related organisms in phosphorus removal in full-scale wastewater treatment plants

The participation of organisms related to Rhodocyclus in full-scale enhanced biological phosphorus removal (EBPR) was investigated. By using fluorescent in situ hybridization techniques, the communities of Rhodocyclus-related organisms in two full-scale wastewater treatment plants were estimated to represent between 13 and 18% of the total bacterial population. However, the fractions of these communities that participated in polyphosphate accumulation depended on the type of treatment process evaluated. In a University of Cape Town EBPR process, the percentage of Rhodocyclus-related cells that contained polyphosphate was about 20% of the total bacterial population, but these cells represented as much as 73% of the polyphosphate-accumulating organisms (PAOs). In an aerated-anoxic EBPR process, Rhodocyclus-related PAOs were less numerous, accounting for 6% of the total bacterial population and 26% of the total PAO population. In addition, 16S ribosomal DNA sequences 99.9% similar to the sequences of Rhodocyclus-related organisms enriched in acetate-fed bench-scale EBPR reactors were recovered from both full-scale plants. These results confirmed the involvement of Rhodocyclus-related organisms in EBPR and demonstrated their importance in full-scale processes. In addition, the results revealed a significant correlation between the type of EBPR process and the PAO community.

Bacterial community composition and function in sewage treatment systems

The application of modern molecular techniques has led to the identification, in situ quantification, and partial ecophysiological characterisation of bacteria responsible for bulking and foaming or for nutrient removal in sewage treatment systems. Unexpectedly, previously unrecognised, yet uncultured bacteria were demonstrated to catalyse nitrogen and phosphorous removal in activated-sludge and biofilm reactors. These findings provide the basis for the development of novel concepts for improving the efficiency and functional stability of waste water treatment systems.

Isolation and characterization of a Gram-positive polyphosphate-accumulating bacterium

A Gram-positive polyphosphate-accumulating bacterium was isolated from phosphate-removal activated sludge using pyruvate-supplemented agar plates. The isolate was oval or coccobacilli (0.4-0.7 x 0.5-1.0 mm) that occurred singly, in pairs or irregular clumps. Polyphosphate granules in the cells were observed by toluidine blue staining. The pure culture of the isolate rapidly took up phosphate (9.2 mg-P/g-dry weight) in the 3-h aerobic incubation without organic substrates, after anaerobic incubation with organic substrates containing casamino acids. When acetate was the sole carbon source in the anaerobic incubation, the isolate did not remove phosphate. These physiological features of the isolate were similar to those of Microlunatus phosphovorus. However, unlike M. phosphovorus the P-removal ability of the isolate was relatively low and was not accelerated by repeating the anaerobic/aerobic incubation cycles. Phylogenetic analysis and comparison of several characteristics showed that the isolate was identified as Tetrasphaera elongata which was recently proposed as a new polyphosphate-accumulating species isolated from activated sludge. As the isolate contained menaquinone (MK)-8(H(4)) as the predominant isoprenoid ubiquinone, it may be significantly responsible for phosphate removal, because MK-8(H(4)) has reportedly been found in fairly high proportions in many phosphate-removing activated sludges.

Polyphasic approaches to the identification of predominant polyphosphate-accumulating organisms in a laboratory-scale anaerobic/aerobic activated sludge system

By combination of denaturing gradient gel electrophoresis of PCR-amplified 16S rDNA (PCR-DGGE), quinone profiling, and 16S rRNA-targeted fluorescence in situ hybridization (FISH), a polyphosphate-accumulating organism (PAO) responsible for phosphate (P)-removal was identified in activated sludge with high P-removal ability from a laboratory-scale anaerobic/aerobic continuous flow reactor. The DNA fragment from the most dense band on the DGGE gel was closely related to that of 'Candidatus Accumulibacter phosphatis' (beta-Proteobacteria). Quinone profiling also suggested the predominance of beta-Proteobacteria. FISH with a specific oligonucleotide probe designed for the sequence showed that the targeted bacterium was dominant in the activated sludge, and the accumulation and consumption of polyphosphate were observed by dual staining with 4',6-diamidino-2-phenylindole. The bacterium was concluded to be the responsible PAO in the reactor. However, when the P-removal ability per cell slightly decreased, the dominance of the PAO greatly diminished in the activated sludge. Such sludge might be dominated by other types of PAOs.

Modern scientific methods and their potential in wastewater science and technology

Application of novel analytical and investigative methods such as fluorescence in situ hybridization, confocal laser scanning microscopy (CLSM), microelectrodes and advanced numerical simulation has led to new insights into micro- and macroscopic processes in bioreactors. However, the question is still open whether or not these new findings and the subsequent gain of knowledge are of significant practical relevance and if so, where and how. To find suitable answers it is necessary for engineers to know what can be expected by applying these modern analytical tools. Similarly, scientists could benefit significantly from an intensive dialogue with engineers in order to find out about practical problems and conditions existing in wastewater treatment systems. In this paper, an attempt is made to help bridge the gap between science and engineering in biological wastewater treatment. We provide an overview of recently developed methods in microbiology and in mathematical modeling and numerical simulation. A questionnaire is presented which may help generate a platform from which further technical and scientific developments can be accomplished. Both the paper and the questionnaire are aimed at encouraging scientists and engineers to enter into an intensive, mutually beneficial dialogue.

Characterization of denitrifying phosphate-accumulating organisms cultivated under different electron acceptor conditions using polymerase chain reaction-denaturing gradient gel electrophoresis assay

To investigate the characteristics and the microbial diversity of denitrifying phosphate-accumulating organisms (DNPAOs) that are capable of conducting enhanced biological phosphorus removal (EBPR) using nitrate as electron acceptor, three sequencing batch reactors were operated under three different electron acceptor conditions, i.e., only oxygen, oxygen together with nitrate and only nitrate. Based on the chemical analysis concerning the biochemical transformation of each reactor, it was found that phosphate-accumulating organisms responsible for EBPR consisted of at least three populations including DNPAOs, and that the microbial community structure was changed according to the electron acceptor conditions. Also, the sludge cultivated with oxygen together with nitrate showed a drastic increase in the amount of phosphorus uptake under anoxic conditions, which suggested that a proportion of DNPAOs capable of utilizing nitrate under aerobic conditions were present. On the other hand, the change in microbial community structure depending on the type of electron acceptor was demonstrated by the analysis of the results of denaturing gradient gel electrophoresis of polymerase chain reaction-amplified 16S ribosomal DNA fragments. It was found that the bacteria commonly contained in all the reactors were Rhodocyclus sp. (96% identity) and Dechlorimonas sp. (97% identity) that belonged to the beta subclass of Proteobacteria on the basis of the analysis of the sequence excised from DGGE bands and the determination of phylogenetic affiliation. However, only the presence of Rhodocyclus sp. in all the reactors was demonstrated by fluorescent in situ hybridization analysis.

Sludge population optimisation: a new dimension for the control of biological wastewater treatment systems

The activated sludge comprises a complex microbiological community. The structure (what types of microorganisms are present) and function (what can the organisms do and at what rates) of this community are determined by external physico-chemical features and by the influent to the sewage treatment plant. The external features we can manipulate but rarely the influent. Conventional control and operational strategies optimise activated sludge processes more as a chemical system than as a biological one. While optimising the process in a short time period, these strategies may deteriorate the long-term performance of the process due to their potentially adverse impact on the microbial properties. Through briefly reviewing the evidence available in the literature that plant design and operation affect both the structure and function of the microbial community in activated sludge, we propose to add sludge population optimisation as a new dimension to the control of biological wastewater treatment systems. We stress that optimising the microbial community structure and property should be an explicit aim for the design and operation of a treatment plant. The major limitations to sludge population optimisation revolve around inadequate microbiological data, specifically community structure, function and kinetic data. However, molecular microbiological methods that strive to provide that data are being developed rapidly. The combination of these methods with the conventional approaches for kinetic study is briefly discussed. The most pressing research questions pertaining to sludge population optimisation are outlined.

Population changes in a biofilm reactor for phosphorus removal as evidenced by the use of FISH

Induction of denitrification was investigated for a lab-scale phosphate removing biofilm reactor where oxygen was replaced with nitrate as the electron acceptor. Acetate was used as the carbon source. The original biofilm (acclimatised with oxygen) was taken from a well-established large-scale reactor. During the first run, a decrease in the denitrifying bio-P activity was observed after 1 month following a change in the anaerobic phase length. This was initially interpreted as a shift in the microbial population caused by the changed operation. In the second run, biomass samples were regularly collected and analysed by fluorescent in situ hybridisation (FISH) and confocal laser scanning microscopy (CLSM). Concurrently, samples were taken from the original reactor with oxygen as electron acceptor in order to investigate natural microbial fluctuations. A similar decrease in the activity as in the first run was seen after one month, although the phase lengths had not been varied. Hence, the decrease after 1 month in the first and second run should be seen as a start-up phenomenon. FISH could detect a noticeable shift in the microbial population mainly within the first 2 weeks of operation. Almost all bacteria belonging to the alpha subclass disappeared and characteristic clusters of the beta and gamma subclasses were lost. Small clusters of gram-positive bacteria with a high DNA G + C content (GPBHGC) were gradually replaced by filamentous GPBHGC. Most of the bacteria in the denitrifying, phosphate removing biofilm belonged to the beta subclass of Proteobacteria. The applied set of gene probes had been selected based on existing literature on biological phosphate removing organisms and included a recently published probe for a Rhodocyclus-like clone. However, none of the specific probes hybridised to the dominant bacterial groups in the reactors investigated. No noticeable changes were detected in the aerobic bench-scale reactor during this period, indicating that the observed changes in the lab-scale reactor were caused by the changed environment.

A culture-independent survey of the bacterial community in a radon hot spring

Paralana is an active, radon-containing hot spring situated in a region of South Australia's Flinders Ranges with a long history of hydrothermal activity. Our aim was to determine the bacterial composition of Paralana using a culture-independent, 16S rRNA-based technique. The presence of a diverse bacterial community was strongly suggested by the large number (approximately 180) of different ribotypes obtained upon analysis of nine hot spring samples. DNA sequencing of Paralana 16S rRNA genes corroborated this observation, identifying representatives of seven confirmed and two candidate divisions of the domain Bacteria. These included Cyanobacteria, Proteobacteria (both beta and delta subdivisions), the Cytophaga-Flexibacter-Bacteroides group, Low G + C Gram-positives, Nitrospira, green non-sulfur bacteria, green sulfur bacteria, OP8, and OP12. No known ionizing radiation-resistant Bacteria were identified. Only one Paralana 16S rRNA sequence type (recombinant B5D) was homologous to a sequence previously identified from a radioactive environment.

The EAWAG Bio-P module for activated sludge model No. 3

An additional module for the prediction of enhanced biological phosphorus removal is presented on the basis of a calibrated version of ASM3. The module uses modified processes from ASM2d but neglects the fermentation of readily degradable substrate. Biomass decay is modeled in the form of endogenous respiration as in ASM3. Moreover, an additional glycogen pool and biologically induced P-precipitation were not taken into account. The module was systematically calibrated with experimental data from various batch experiments, a full-scale WWTP and a pilot plant treating Swiss municipal waste water. A standard parameter set allowed all data to be simulated.

Synthesis of intracellular storage polymers by Amaricoccus kaplicensis, a tetrad forming bacterium present in activated sludge

AIMS

The study investigated the physiology of Amaricoccus kaplicensis to determine whether it could outcompete polyphosphate accumulating bacteria in activated sludge systems removing phosphorus, by preferentially assimilating substrates in the anaerobic stages of these processes.

METHODS AND RESULTS

The storage processes were investigated under anaerobic, anoxic and aerobic conditions in both batch and periodically fed cultures in an aerobic sequencing batch reactor (SBR). Amaricoccus kaplicensis showed a high capacity for storing aerobically large amounts of acetate as poly beta-hydroxybutyrate (PHB) at high rates. However, no acetate assimilation under anaerobic conditions and very slow assimilation under anoxic conditions could be detected.

CONCLUSION

Amaricoccus kaplicensis in pure culture does not behave as polyphosphate accumulating bacteria competitor; therefore it is difficult to understand why anaerobic/aerobic systems often contain such large numbers of Amaricoccus cells.

SIGNIFICANCE AND IMPACT OF THE STUDY

Amaricoccus kaplicensis is probably not responsible for the failure of activated sludge systems removing phosphorus, and other organisms capable of anaerobic substrate assimilation should be sought.

Microorganisms relevant to bioremediation

Naturally occurring microbial consortia have been utilized in a variety of bioremediation processes. Recent developments in molecular microbial ecology offer new tools that facilitate molecular analyses of microbial populations at contaminated and bioremediated sites. Information provided by such analyses aids in the evaluation of the effectiveness of bioremediation and the formulation of strategies that might accelerate bioremediation.

The identification of microorganisms by fluorescence in situ hybridisation

Fluorescence in situ hybridisation (FISH) with rRNA-targeted oligonucleotide probes facilitates the rapid and specific identification of individual microbial cells in their natural environments. Over the past year there have been a number of methodological developments in this area and new applications of FISH in microbial ecology and biotechnology have been reported.

RAPD-PCR typing of Acinetobacter isolates from activated sludge systems designed to remove phosphorus microbiologically

AIMS

This study investigated whether there were differences in RAPD fingerprints between already described genomic species of Acinetobacter and those from activated sludge systems. Whether plant-specific populations of acinetobacters exist was also examined.

METHODS AND RESULTS

Fifty-two isolates of Acinetobacter from four biological phosphorus removal (EBPR) systems of different configurations, and the known genomic species, were characterized using RAPD-PCR, and fragments separated on agarose gels. Patterns were analysed using Gel Pro software and data analysed numerically. RAPD-PCR produced patterns suggesting that many environmental isolates differ from known genomic species. In two cases, strains from individual plants clustered closely enough together to imply that there may be plant-specific populations of acinetobacters.

CONCLUSION

The data suggest that current understanding of the taxonomic status of Acinetobacter may need modifying to accommodate non-clinical isolates, as many of the clusters emerging after numerical analysis of RAPD-PCR fragments from activated sludge isolates were quite separate from the clusters containing the already described genomic species. Some evidence was also obtained from the clusters generated to support a view that particular populations of Acinetobacter may occur in individual activated sludge plants.

SIGNIFICANCE AND IMPACT OF THE STUDY

These data suggest that the current understanding of the systematics of Acinetobacter, based as it is almost exclusively on clinical isolates, may need drastic revision to accommodate environmental strains. They also suggest that a re-examination of the importance and role of Acinetobacter in the activated sludge process may be appropriate.

In situ identification of polyphosphate- and polyhydroxyalkanoate-accumulating traits for microbial populations in a biological phosphorus removal process

Polyphosphate- and polyhydroxyalkanoate (PHA)-accumulating traits of predominant microorganisms in an efficient enhanced biological phosphorus removal (EBPR) process were investigated systematically using a suite of non-culture-dependent methods. Results of 16S rDNA clone library and fluorescence in situ hybridization (FISH) with rRNA-targeted, group-specific oligonucleotide probes indicated that the microbial community consisted mostly of the alpha- (9.5% of total cells), beta- (41.3%) and gamma- (6.8%) subclasses of the class Proteobacteria, Flexibacter-Cytophaga (4.5%) and the Gram-positive high G+C (HGC) group (17.9%). With individual phylogenetic groups or subgroups, members of Candidatus Accumulibacter phosphatis in the beta-2 subclass, a novel HGC group closely related to Tetrasphaera spp., and a novel gamma-proteobacterial group were the predominant populations. Furthermore, electron microscopy with energy-dispersive X-ray analysis was used to validate the staining specificity of 4,6-diamino-2-phenylindole (DAPI) for intracellular polyphosphate and revealed the composition of polyphosphate granules accumulated in predominant bacteria as mostly P, Ca and Na. As a result, DAPI and PHA staining procedures could be combined with FISH to identify directly the polyphosphate- and PHA-accumulating traits of different phylogenetic groups. Members of Accumulibacter phosphatis and the novel gamma-proteobacterial group were observed to accumulate both polyphosphate and PHA. In addition, one novel rod-shaped group, closely related to coccus-shaped Tetrasphaera, and one filamentous group resembling Candidatus Nostocoidia limicola in the HGC group were found to accumulate polyphosphate but not PHA. No cellular inclusions were detected in most members of the alpha-Proteobacteria and the Cytophaga-Flavobacterium group. The diversified functional traits observed suggested that different substrate metabolisms were used by predominant phylogenetic groups in EBPR processes.

Investigation of candidate division TM7, a recently recognized major lineage of the domain Bacteria with no known pure-culture representatives

A molecular approach was used to investigate a recently described candidate division of the domain Bacteria, TM7, currently known only from environmental 16S ribosomal DNA sequence data. A number of TM7-specific primers and probes were designed and evaluated. Fluorescence in situ hybridization (FISH) of a laboratory scale bioreactor using two independent TM7-specific probes revealed a conspicuous sheathed-filament morphotype, fortuitously enriched in the reactor. Morphologically, the filament matched the description of the Eikelboom morphotype 0041-0675 widely associated with bulking problems in activated-sludge wastewater treatment systems. Transmission electron microscopy of the bioreactor sludge demonstrated that the sheathed-filament morphotype had a typical gram-positive cell envelope ultrastructure. Therefore, TM7 is only the third bacterial lineage recognized to have gram-positive representatives. TM7-specific FISH analysis of two full-scale wastewater treatment plant sludges, including the one used to seed the laboratory scale reactor, indicated the presence of a number of morphotypes, including sheathed filaments. TM7-specific PCR clone libraries prepared from the two full-scale sludges yielded 23 novel TM7 sequences. Three subdivisions could be defined based on these data and publicly available sequences. Environmental sequence data and TM7-specific FISH analysis indicate that members of the TM7 division are present in a variety of terrestrial, aquatic, and clinical habitats. A highly atypical base substitution (Escherichia coli position 912; C to U) for bacterial 16S rRNAs was present in almost all TM7 sequences, suggesting that TM7 bacteria, like Archaea, may be streptomycin resistant at the ribosome level.

Microbiology of the 'G-bacteria' in activated sludge

This review discusses a group of bacteria, the 'G-bacteria', which have a distinctive morphology of cocci in tetrads, sheets or clusters, that are seen in large numbers in many activated sludge biomass samples. Isolates of 'G-bacteria' that have been grown axenically are phylogenetically diverse. The Gram-negative members include several alpha- and beta-proteobacteria, among which is the genus Amaricoccus, while the Gram-positive 'G-bacteria' contain several members of the actinobacteria. It is probable that other, as yet uncharacterized, 'G-bacteria' exist in activated sludge. The hypothesis that these 'G-bacteria' are detrimental to the process of enhanced biological phosphate removal by competing for substrates anaerobically with the phosphate-accumulating bacteria in such systems, based as it is largely on mixed-culture studies, receives little support from studies using those available in pure culture. The evidence on which these conclusions are founded is discussed, as are the arguments used to explain why these 'G-bacteria' all appear to thrive under conditions found in certain activated sludge systems.

Community composition of marine bacterioplankton determined by 16S rRNA gene clone libraries and fluorescence in situ hybridization

We determined the compositions of bacterioplankton communities in surface waters of coastal California using clone libraries of 16S rRNA genes and fluorescence in situ hybridization (FISH) in order to compare the community structures inferred from these two culture-independent approaches. The compositions of two clone libraries were quite similar to those of clone libraries of marine bacterioplankton examined by previous studies. Clones from gamma-proteobacteria comprised ca. 28% of the libraries, while approximately 55% of the clones came from alpha-proteobacteria, which dominated the clone libraries. The Cytophaga-Flavobacter group and three others each comprised 10% or fewer of the clone libraries. The community composition determined by FISH differed substantially from the composition implied by the clone libraries. The Cytophaga-Flavobacter group dominated 8 of the 11 communities assayed by FISH, including the two communities assayed using clone libraries. On average only 10% of DAPI (4', 6'-diamidino-2-phenylindole)-stained bacteria were detected by FISH with a probe for alpha-proteobacteria, but 30% of DAPI-stained bacteria appeared to be in the Cytophaga-Flavobacter group as determined by FISH. alpha-Proteobacteria were greatly overrepresented in clone libraries compared to their relative abundance determined by FISH, while the Cytophaga-Flavobacter group was underrepresented in clone libraries. Our data show that the Cytophaga-Flavobacter group can be a numerically dominant component of coastal marine bacterioplankton communities.