Tuning the autophagy-inducing activity of lanthanide-based nanocrystals through specific surface-coating peptides

The induction of autophagy on exposure of cells to a variety of nanoparticles represents both a safety concern and an application niche for engineered nanomaterials. Here, we show that a short synthetic peptide, RE-1, identified by means of phage display, binds to lanthanide (LN) oxide and upconversion nanocrystals (UCN), forms a stable coating layer on the nanoparticles' surface, and effectively abrogates their autophagy-inducing activity. Furthermore, RE-1 peptide variants exhibit a differentially reduced binding capability, and correspondingly, a varied ability to reduce the autophagic response. We also show that the addition of an arginine-glycine-aspartic acid (RGD) motif to RE-1 enhances autophagy for LN UCN through the interaction with integrins. RE-1 and its variants provide a versatile tool for tuning material-cell interactions to achieve the desired level of autophagy, and may prove useful for the various diagnostic and therapeutic applications of LN-based nanomaterials and nanodevices.

Simultaneous quantification of tumor uptake for targeted and nontargeted liposomes and their encapsulated contents by ICPMS

Liposomes are intensively being developed for biomedical applications including drug and gene delivery. However, targeted liposomal delivery in cancer treatment is a very complicated multistep process. Unfavorable liposome biodistribution upon intravenous administration and membrane destabilization in blood circulation could result in only a very small fraction of cargo reaching the tumors. It would therefore be desirable to develop new quantitative strategies to track liposomal delivery systems to improve the therapeutic index and decrease systemic toxicity. Here, we developed a simple and nonradiative method to quantify the tumor uptake of targeted and nontargeted control liposomes as well as their encapsulated contents simultaneously. Specifically, four different chelated lanthanide metals were encapsulated or surface-conjugated onto tumor-targeted and nontargeted liposomes, respectively. The two liposome formulations were then injected into tumor-bearing mice simultaneously, and their tumor delivery was determined quantitatively via inductively coupled plasma mass spectroscopy (ICPMS), allowing for direct comparisons. Tumor uptake of the liposomes themselves and their encapsulated contents was consistent with targeted and nontargeted liposome formulations that were injected individually.

Multivalent porous silicon nanoparticles enhance the immune activation potency of agonistic CD40 antibody

One of the fundamental paradigms in the use of nanoparticles to treat disease is to evade or suppress the immune system in order to minimize systemic side effects and deliver sufficient nanoparticle quantities to the intended tissues. However, the immune system is the body's most important and effective defense against diseases. It protects the host by identifying and eliminating foreign pathogens as well as self-malignancies. Here we report a nanoparticle engineered to work with the immune system, enhancing the intended activation of antigen presenting cells (APCs). We show that luminescent porous silicon nanoparticles (LPSiNPs), each containing multiple copies of an agonistic antibody (FGK45) to the APC receptor CD40, greatly enhance activation of B cells. The cellular response to the nanoparticle-based stimulators is equivalent to a 30-40 fold larger concentration of free FGK45. The intrinsic near-infrared photoluminescence of LPSiNPs is used to monitor degradation and track the nanoparticles inside APCs.

Engineering nano- and microparticles to tune immunity

The immune system can be a cure or cause of disease, fulfilling a protective role in attacking cancer or pathogenic microbes but also causing tissue destruction in autoimmune disorders. Thus, therapies aimed to amplify or suppress immune reactions are of great interest. However, the complex regulation of the immune system, coupled with the potential systemic side effects associated with traditional systemic drug therapies, has presented a major hurdle for the development of successful immunotherapies. Recent progress in the design of synthetic micro- and nano-particles that can target drugs, deliver imaging agents, or stimulate immune cells directly through their physical and chemical properties is leading to new approaches to deliver vaccines, promote immune responses against tumors, and suppress autoimmunity. In addition, novel strategies, such as the use of particle-laden immune cells as living targeting agents for drugs, are providing exciting new approaches for immunotherapy. This progress report describes recent advances in the design of micro- and nano-particles for immunotherapies and diagnostics.

Fungal antioxidant pathways promote survival against neutrophils during infection

Filamentous fungi are a common cause of blindness and visual impairment worldwide. Using both murine model systems and in vitro human neutrophils, we found that NADPH oxidase produced by neutrophils was essential to control the growth of Aspergillus and Fusarium fungi in the cornea. We demonstrated that neutrophil oxidant production and antifungal activity are dependent on CD18, but not on the β-glucan receptor dectin-1. We used mutant A. fumigatus strains to show that the reactive oxygen species-sensing transcription factor Yap1, superoxide dismutases, and the Yap1-regulated thioredoxin antioxidant pathway are each required for protection against neutrophil-mediated oxidation of hyphae as well as optimal survival of fungal hyphae in vivo. We also demonstrated that thioredoxin inhibition using the anticancer drug PX-12 increased the sensitivity of fungal hyphae to both H2O2- and neutrophil-mediated killing in vitro. Additionally, topical application of PX-12 significantly enhanced neutrophil-mediated fungal killing in infected mouse corneas. Cumulatively, our data reveal critical host oxidative and fungal anti-oxidative mediators that regulate hyphal survival during infection. Further, these findings also indicate that targeting fungal anti-oxidative defenses via PX-12 may represent an efficacious strategy for treating fungal infections.

The immunopathology of sepsis: pathogen recognition, systemic inflammation, the compensatory anti-inflammatory response, and regulatory T cells

Sepsis, the systemic inflammatory response to infection, represents the major cause of death in critically ill veterinary patients. Whereas important advances in our understanding of the pathophysiology of this syndrome have been made, much remains to be elucidated. There is general agreement on the key interaction between pathogen-associated molecular patterns and cells of the innate immune system, and the amplification of the host response generated by pro-inflammatory cytokines. More recently, the concept of immunoparalysis in sepsis has also been advanced, together with an increasing recognition of the interplay between regulatory T cells and the innate immune response. However, the heterogeneous nature of this syndrome and the difficulty of modeling it in vitro or in vivo has both frustrated the advancement of new therapies and emphasized the continuing importance of patient-based clinical research in this area of human and veterinary medicine.

Bifunctional bacterial magnetic nanoparticles for tumor targeting

Bifunctional bacterial magnetic nanoparticles (BBMPs), which present both magnetic drug targeting and tumor bio-targeting properties, have been developed by chemically coupling both doxorubicin and a galactosyl ligand on to the membrane surface of the bacterial magnetic nanoparticles (BMPs). The BBMP product has a high drug load ratio and magnetic respondence, and exhibits a narrow size distribution and is sensitive to pH to enable drug release. In comparison to doxorubicin-coupled BMPs, without modification with a galactosyl ligand, BBMPs present a higher uptake by the target asialoglycoprotein receptor (ASGP-R) expressed by HepG2 cells and display stronger cytotoxicity.

Antitumor immunologically modified carbon nanotubes for photothermal therapy

An immunologically modified nanotube system was developed using an immunoadjuvant, glycated chitosan (GC), as surfactant of single-walled carbon nanotube (SWNTs). This SWNT-GC system not only retained both optical properties of SWNTs and immunological functions of GC, but also could enter cells due to the carrier properties of SWNTs. Cellular SWNTs induced thermal destruction of tumor cells when irradiated by a near-infrared laser and, at the same time, cellular GC could serve both as damage associated molecular pattern molecules (DAMPs) and pathogen associated molecular pattern molecules (PAMPs) to enhance the tumor immunogenicity and enhance the uptake and presentation of tumor antigens, leading to special antitumor response. Using this system and a 980 nm laser, we treated tumors, both in vitro and in vivo, and investigated the induced thermal and immunological effects. Laser + SWNT-GC afford a remarkable efficacy in suppressing tumor growth in animal cancer models, in many cases resulting in complete tumor regression and long-term survival. Mice successfully treated by Laser + SWNT-GC could establish resistance to tumor rechallenge. This system forms a multifunctional temporal-spatial continuum, which can synergize photothermal and immunological effects. The Laser + SWNT-GC could represent a promising treatment modality to induce systemic antitumor response through a local intervention, while minimizing the adverse side effects.

Differential effect of inhibiting MD-2 and CD14 on LPS- versus whole E. coli bacteria-induced cytokine responses in human blood

BACKGROUND

Sepsis is a major world-wide medical problem with high morbidity and mortality. Gram-negative bacteria are among the most important pathogens of sepsis and their LPS content is regarded to be important for the systemic inflammatory reaction. The CD14/myeloid differentiation factor 2 (MD-2)/TLR4 complex plays a major role in the immune response to LPS . The aim of this study was to compare the effects of inhibiting MD-2 and CD14 on ultra-pure LPS - versus whole E. coli bacteria-induced responses.

METHODS

Fresh human whole blood was incubated with upLPS or whole E. coli bacteria in the presence of MD-2 or CD14 neutralizing monoclonal antibodies, or their respective controls, and/or the specific complement-inhibitor compstatin. Cytokines were measured by a multiplex (n = 27) assay. NFκB activity was examined in cells transfected with CD14, MD-2 and/or Toll-like receptors.

RESULTS

LPS-induced cytokine response was efficiently and equally abolished by MD-2 and CD14 neutralization. In contrast, the response induced by whole E. coli bacteria was only modestly reduced by MD-2 neutralization, whereas CD14 neutralization was more efficient. Combination with compstatin enhanced the effect of MD-2 neutralization slightly. When compstatin was combined with CD14 neutralization, however, the response was virtually abolished for all cytokines, including IL-17, which was only inhibited by this combination. The MD-2-independent effect observed for CD14 could not be explained by TLR2 signaling.

CONCLUSION

Inhibition of CD14 is more efficient than inhibition of MD-2 on whole E. coli-induced cytokine response, suggesting CD14 to be a better target for intervention in Gram-negative sepsis, in particular when combined with complement inhibition.

The role of innate immune-stimulated epithelial apoptosis during gastrointestinal inflammatory diseases

The maintenance of mucosal barrier equilibrium in the intestine requires a delicate and dynamic balance between enterocyte loss by apoptosis and the generation of new cells by proliferation from stem cell precursors at the base of the intestinal crypts. When the balance shifts towards either excessive or insufficient apoptosis, a broad range of gastrointestinal diseases can manifest. Recent work from a variety of laboratories has provided evidence in support of a role for receptors of the innate immune system, including Toll-like receptors 2, 4, and 9 as well as the intracellular pathogen recognition receptor NOD2/CARD15, in the initiation of enterocyte apoptosis. The subsequent induction of enterocyte apoptosis in response to the activation of these innate immune receptors plays a key role in the development of various intestinal diseases, including necrotizing enterocolitis, Crohn's disease, ulcerative colitis, and intestinal cancer. This review will detail the regulatory pathways that govern enterocyte apoptosis, and will explore the role of the innate immune system in the induction of enterocyte apoptosis in gastrointestinal disease.

LY96, UPKIB mutations and TLR4, CD14, MBL polymorphisms in children with urinary tract infection

OBJECTIVE

To evaluate genetic variations of innate immune system such as mannose binding lectin (MBL), Toll like receptor 4 (TLR4), CD14, LY96 (MD2) and Uroplakin 1B (UPK1B) genes in children with recurrent urinary tract infection (UTI).

METHODS

The study included 30 children with recurrent UTI and 30 healthy controls. Blood was drawn and analysed for genetic polymorphisms of MBL, TLR4 and CD14 genes by the PCR-RFLP method. Direct DNA sequencing analysis was performed for LY96 and UPK 1B gene mutation in 10 children from UTI group and 5 children from control group.

RESULTS

TLR4 gene Thr399Ile polymorphism was not observed in any child. Genotype distribution and allele frequency of Asp299Gly polymorphism was similar in both groups (p = 0.55). Codon 54 polymorphism of the MBL gene was similar in UTI and control groups (p = 0.49). -159 CC/CT/TT genotypes of CD14 gene was similar between the two groups (p = 0.14). UPK1B and LY96 gene DNA sequence analysis was similar in UTI and control groups.

CONCLUSIONS

This study is the first study in which different parts of the innate immune system were evaluated in UTI etiopathogenesis in Turkish children. The results did not point out a significant role of any of the genes evaluated in this study.

Monocytes differentiated with GM-CSF and IL-15 initiate Th17 and Th1 responses that are contact-dependent and mediated by IL-15

Distinct types of DCs are generated from monocytes using GM-CSF with IL-4 (IL4-DC) or IL-15 (IL15-DC). IL15-DCs are potent inducers of antigen-specific CD8(+) T cells, display a phenotype similar to CD14(+) cells commonly described in chronically inflamed tissues, and produce high levels of IL-1β and IL-15 in response to TLR4 stimulation. As these cytokines promote Th17 responses, which are also associated with inflammatory diseases, I hypothesized that TLR-primed IL15-DCs favor Th17 activation over IL4-DCs. Compared with IL4-DCs, IL15-DCs stimulated with TLR agonists secreted significantly higher concentrations of the Th17-promoting factors, IL-1β, IL-6, IL-23, and CCL20, and lower levels of the Th1 cytokine, IL-12. In addition, IL15-DCs and not IL4-DCs up-regulated IL-15 on the cell surface in response to TLR agonists. IL15-DCs primed with TLR3 or TLR4 agonists triggered Th17 (IL-17, IL-22, and/or IFN-γ) and Th1 (IFN-γ) responses, whereas IL4-DCs primed with the same TLR agonists activated Th1 (IFN-γ) responses. Secretion of IL-17 and IFN-γ required contact with TLR-primed IL15-DC, and IFN-γ production was mediated by membrane-bound IL-15. These findings identify key differences in monocyte-derived DCs, which impact adaptive immunity, and provide primary evidence that IL-15 promotes Th17 and Th1 responses by skewing monocytes into IL15-DC.

Dangers within: DAMP responses to damage and cell death in kidney disease

The response to exogenous pathogens leads to activation of innate immunity through the release of pathogen-associated molecular patterns (PAMPs) and their binding to pattern recognition receptors. A classic example is septic shock where Toll receptor 4 recognizes PAMPs. Although well accepted, this concept does not explain the activation of innate immunity and inflammation occurs with transplantation, autoimmunity, or trauma. Increasingly recognized is that endogenous molecules released by dying cells (damage-associated molecular patterns; DAMPs) activate cellular receptors leading to downstream inflammation. Thus endogenous danger signals and exogenous PAMPs elicit similar responses through seemingly similar mechanisms. Also emerging is our understanding that normal repair processes benefit from dampening the immune response to these endogenous danger molecules. Here we focus on the role of DAMPs and their putative receptors in the pathogenesis of acute and chronic kidney diseases.

Plasma nanotextured PMMA surfaces for protein arrays: increased protein binding and enhanced detection sensitivity

Poly(methyl methacrylate) (PMMA) substrates were nanotextured through treatment in oxygen plasma to create substrates with increased surface area for protein microarray applications. Conditions of plasma treatment were found for maximum uniform protein adsorption on these nanotextured PMMA surfaces. Similar results were obtained using both a high-density plasma (HDP) and a low-density reactive ion etcher (RIE), suggesting independence from the plasma reactor type. The protein binding was evaluated by studying the adsorption of two model proteins, namely, biotinylated bovine serum albumin (b-BSA) and rabbit gamma-globulins (RgG). The immobilization of these proteins onto the surfaces was quantitatively determined through reaction with fluorescently labeled binding molecules. It was found that the adsorption of both proteins was increased up to 6-fold with plasma treatment compared to untreated surfaces and up to 4-fold compared to epoxy-coated glass slides. The sensitivity of detection was improved by 2 orders of magnitude. Moreover, highly homogeneous protein spots were created on optimized plasma-nanotextured surfaces through deposition with an automated microarray spotter, revealing the potential of plasma-nanotextured surfaces as protein microarray substrates.

Linking oxidative stress to inflammation: Toll-like receptors

Injury caused by oxidative stress occurs in many clinical scenarios involving ischemia and reperfusion such as organ transplantation, hemorrhagic shock (HS), myocardial infarction, and cerebral vascular accidents. Activation of the immune system as a result of disturbances in the redox state of cells seems to contribute to tissue and organ damage in these conditions. The link between oxidative stress and inflammatory pathways is poorly understood. Recently, Toll-like receptors (TLRs) have been shown to mediate the inflammatory response seen in experimental ischemia and reperfusion (I/R). The TLR family of receptors involved in alerting the innate immune system of danger seems to be activated by damage-associated molecular pattern molecules (DAMPs) that are released during conditions of oxidative stress. In this review, we examine the role of TLRs in various experimental models of oxidative stress such as HS and I/R. We also report on potential DAMPs that may interact with TLRs in mediating injury. Finally, potential mechanisms by which reactive oxygen species from NADPH oxidase can signal the commencement of inflammatory pathways through TLRs are explored.

Studying Cellular Processes and Detecting Disease with Protein Microarrays

Protein microarrays are a rapidly developing analytic tool with diverse applications in biomedical research. These applications include profiling of disease markers or autoimmune responses, understanding molecular pathways, protein modifications, and protein activities. One factor that is driving this expanding usage is the wide variety of experimental formats that protein microarrays can take. In this review, we provide a short, conceptual overview of the different approaches for protein microarray. We then examine some of the most significant applications of these microarrays to date, with an emphasis on how global protein analyses can be used to facilitate biomedical research.

Controlling orientations of immobilized oligopeptides using N-terminal cysteine labels

This letter reports a strategy of using N-terminal cysteine labels for controlling the immobilization of oligopeptides on aldehyde-terminated surfaces through the formation of stable thiazolidine rings. We also study the effect of cysteine position (either N-terminal or C-terminal) and lysine residue on the immobilization of oligopeptides. On the basis of our ellipsometry and quartz crystal microbalance (QCM) results, we conclude that the proposed immobilization strategy is highly site-specific. It works only when cysteine is in the N-terminal position, and the formation of thiazolidine is much faster than the formation of imines between lysine residues and aldehydes, even in the presence of a reducing agent such as NaBH(3)CN. By labeling an oligopeptide CSNKTRIDEANNKATKML with an N-terminal cysteine, we immobilize this oligopeptide on an aldehyde-terminated surface and investigate the enzymatic activity of trypsin acting on the oligopeptide. It is found that trypsin is able to cleave the immobilized oligopeptide having a single anchoring point at the N-terminal cysteine. No cleavage is observed when the oligopeptide is immobilized through multiple anchoring points at lysine residues.

Acid deprotection of covalently immobilized peptide probes on glass slides for peptide microarrays

Protein microarray technology has shown great advancements in the field of biomedical research and diagnosis, it allows to study and understand protein activities and protein - ligand interactions (e.g. detection of antigen-autoantibody interaction in autoimmune diseases. Autoantibodies are frequently targeted against antigens of the cell nucleus (double and single stranded DNA, histones, and nuclear antigens). The biological activities of proteins (e.g. enzymes, antibodies...) are controlled by peptides sequences of the active site. Consequently, we were interested in the investigation of peptide microarrays in order to further implement in situ peptide synthesis, in particular, deprotection reaction on glass supported peptides. In this work, a protected and biotinylated synthetic peptide was covalently immobilized onto amino functionalized glass surface by activation of its the C-terminus; this allows to orientate the peptide onto the surface. The peptide contains a fragment of the C-terminal end of the human histone H3 protein. The immobilized peptide was then deprotected by using concentrated trifluoroacetic acid solution. After the deprotection, surface stability and peptide grafting density were evaluated by indirect labelling of the immobilized peptide using Cy3 streptavidin conjugates. We also studied biological interaction of IgG polyclonal anti-histone H3 antibody with the immobilized peptide epitope to insure the efficiency of the acid deprotection. The specificity of the antibody interaction with the protected versus non protected peptides. This approach may be applied to in situ synthetic and prototected peptides, in order to elaborate a micro-immunoassay prototype for measurement of peptide-protein interactions on high density microarrays, and detection of antibodies in biological fluids such as serum.

Screening of serum samples from Wegener's granulomatosis patients using antibody microarrays

Wegener's Granulomatosis (WG) is an idiopathic granulomatosis autoimmune vasculitis that primarily affects small vessels and is associated with glomerulonephritis and pulmonary granulomatous vasculitis. Anti-neutrophil cytoplasmic auto-antibodies (cANCA) against proteinase-3 are used to identify WG, but ANCA titers are not present in some patients with the localized disease. The objective of this study was to develop an antibody array to help identify protein expression patterns in serum from patients with WG as compared to normals. The arrays were tested for limits of detection, background, and cross reactivity using standard proteins. The arrays were hybridized with either normal patient serum (n = 30) or with serum samples from a population of WG patients (n = 26) that were age and sex matched. Data analysis and curve fitting of the standard dilution series calculated r(2) values and determined a sensitivity of <50 pg/mL for the majority of proteins. A total of 24 proteins were assessed. Several statistically significant increases (p<0.05) were seen in the expression of: angiotensin converting enzyme-I, IFN-γ, IL-8, s-ICAM-1 and s-VCAM in WG patients as compared to controls. Utilizing the antibody microarray technology has led to the identification of potential biomarkers of vascular injury in the serum of WG patients.

Binding and enrichment ofEscherichia coli spheroplasts expressing inner membrane tethered scFv antibodies on surface immobilized antigens

Anchored periplasmic expression (APEx) is a new method for the isolation of high affinity ligand-binding proteins from large combinatorial libraries (Harvey et al., 2004, Proc Natl Acad Sci USA 101(25): 9193-9198). In APEx, proteins are expressed as fusions to a membrane anchor that tethers them onto the periplasmic side of the Escherichia coli inner membrane. Conversion of the cells into spheroplasts and incubation with soluble fluorescently conjugated ligands results in the specific labeling of cells expressing ligand-binding proteins and their subsequent isolation by flow cytometry. Here we show that scFv antibody fragments expressed in the APEx format allow the binding of spheroplasts to immobilized ligands. ScFv antibodies specific for the cardiac glycoside digoxin or for the protective antigen (PA) of Bacillus anthracis as a negative control were expressed in E. coli as fusions to either N-terminal or C-terminal membrane anchoring domains. Only the C-terminally anchored fusions resulted in specific recognition and binding of spheroplasts onto TentaGel beads with immobilized antigen. Following three rounds of flow cytometric screening, spheroplasts expressing anti-digoxin scFvs were enriched 950-fold from a large excess (1,000 x) of spheroplasts expressing anti-PA antibodies. These results indicate that the APEx technology may be employed for the screening of libraries based on binding to insoluble antigens possibly including antigens on cell surfaces.

Dynamic coating using methylcellulose and polysorbate 20 for nondenaturing electrophoresis of proteins on plastic microchips

A dynamic coating using methylcellulose (MC) and a nonionic detergent (polysorbate 20) was developed, which controlled protein adsorption onto the surface of microchannels on a microchip made of poly(methyl methacrylate) (PMMA). Optimum concentration of polysorbate 20 in combination with the range of MC concentrations controlled the protein adsorption onto the microchannel surface, and increased the solubility of the protein samples while facilitating the injection of high concentrations of MC solutions into the microchannels. Higher concentrations of nonionic detergent increased the EOF mobility as opposed to the electrophoretic mobility and caused the electrophoresis to fail. Nondenaturing microchip electrophoresis of protein samples with molecular masses ranging from 20 to 100 kDa were completed in 100 s. Also, successful separation of a BSA sample and its complex with anti-BSA mAb ( 220 kDa) was achieved on a PMMA microchip. The separation exhibited high reproducibility in both migration time (RSD = 1%) and peak area (RSD = 10-15%).

Protein Immobilization Strategies for Protein Biochips

In the past few years, protein biochips have emerged as promising proteomic and diagnostic tools for obtaining information about protein functions and interactions. Important technological innovations have been made. However, considerable development is still required, especially regarding protein immobilization, in order to fully realize the potential of protein biochips. In fact, protein immobilization is the key to the success of microarray technology. Proteins need to be immobilized onto surfaces with high density in order to allow the usage of small amount of sample solution. Nonspecific protein adsorption needs to be avoided or at least minimized in order to improve detection performances. Moreover, full retention of protein conformation and activity is a challenging task to be accomplished. Although a large number of review papers on protein biochips have been published in recent years, few have focused on protein immobilization technology. In this review, current protein immobilization strategies, including physical, covalent, and bioaffinity immobilization for the fabrication of protein biochips, are described. Particular consideration has been given to oriented immobilization, also referred to as site-specific immobilization, which is believed will improve homogeneous surface covering and accessibility of the active site.

Immobilisation of proteins by atomic clusters on surfaces

In this Opinion article, we describe a nanotechnology-based approach to immobilize and orient proteins onto surfaces using atomic clusters prepared by physical methods. This is relevant to future protein biochips where dilute arrays of protein binding sites, each designed to immobilize no more than one protein molecule, would be ideal. In the case of a surface consisting of size-selected atomic gold clusters, proteins containing free cysteine residues can chemisorb directly to the bare cluster surface, thus effecting oriented immobilisation. The selection of atomic gold clusters in the size range 1-100 atoms (<3nm in diameter) is intended to ensure that, typically, only one protein can bind directly to the cluster surface. These nanoclusters of a smaller size scale than that of the protein present minimal contact between the gold and the protein, and hence imply a reduced risk of protein denaturing compared with gold films or extended surfaces.

A cancer protein microarray platform using antibody fragments and its clinical applications

Antibody microarrays have shown great potential for measurement of either a spectrum of target proteins in proteomics or disease-associated antigens in molecular diagnostics. Despite its importance, the applications of antibody microarrays are still limited by a variety of fundamental problems. Among them, cross-reactivity significantly limits the multiplexing ability in parallel sandwich immunoassays. As a result, it is very important to design new capture probes in order to incorporate a universal label into the assay configuration. In this report, an antibody fragments (F(ab')2) microarray platform for serum tumor markers was developed. Each antigen was detected at different concentrations to assemble its calibration curve, and combinations of different markers were tested to examine the specificity of simultaneous detection based on the F(ab')2 microarrays. Diagnostics of serum samples with this cancer antibody microarray platform and immunoradiometric assays (IRMA) were also performed. Wide range calibration curves (0-1280 U mL(-1)) were obtained for each tumor marker. Comparative studies demonstrated that such F(ab')2 microarrays exhibited both moderately improved sensitivity and better specificity than full-sized monoclonal antibody microarrays. It is also demonstrated that this microarray platform is quantitative, highly specific and reasonably sensitive. More importantly, clinical applications of our F(ab')2 microarray platform for upwards of 100 patient serum samples clearly show its potential in cancer diagnostics.

A galactose polyacrylate-based hydrogel scaffold for the detection of cholera toxin and staphylococcal enterotoxin B in a sandwich immunoassay format

A galactoside-based polyacrylate hydrogel was used as a scaffold to immobilize antibodies for the development of a sandwich immunoassay to detect cholera toxin (CT) and staphylococcal enterotoxin B (SEB). The hydrogel possesses large pores and simulates a solution-like environment allowing easy penetration of large biomolecules. Highly crosslinked hydrogels containing pendant amine or carboxyl functionalities were polymerized through a free-radical polymerization process. Covalent crosslinking of the antibodies on hydrogel films was accomplished using a homobifunctional crosslinker or carbodiimide chemistry. Utilizing the two different crosslinking methodologies, our results demonstrated the effectiveness of repetitive additions of crosslinker reactant into a single location on the gel surface. This approach in fact increased the amount of immobilized antibody. Patterned arrays of the immobilized antibodies for sandwich immunoassay development were achieved using a PDMS template containing micro-channels. This template provided a suitable means for applying reagents in multiple cycles. Fluorescence and three-dimensional (3D) imaging by confocal microscopy and laser scanning confocal microscopy of Cy3-labeled anti-CT and/or Cy3-anti-SEB tracer molecules provided qualitative and quantitative measurements on the efficiency of protein immobilization, detection sensitivity and signal-to-noise ratios. As a result of using the galactose polyacrylate-base hydrogel as a platform for immunoassay development, we have successfully been able to achieve low limits of detection for SEB and cholera toxins (1.0 ng mL(-1)). Repetitive additions (>3 cycles) of the crosslinker and antibody have also shown a dramatic increase in the immobilization of antibody resulting in improved immunoassay sensitivity. Fluorescence signal-to-noise ratios using the hydrogel-based immunoassays have been observed as high a 40:1.

High-affinity chelator thiols for switchable and oriented immobilization of histidine-tagged proteins: a generic platform for protein chip technologies

Protein micro-/nanoarrays are becoming increasingly important in systematic approaches for the exploration of protein-protein interactions and dynamic protein networks, so there is a high demand for specific, generic, stable, uniform, and locally addressable protein immobilization on solid supports. Here we present multivalent metal-chelating thiols that are suitable for stable binding of histidine-tagged proteins on biocompatible self-assembled monolayers (SAMs). The architectures and physicochemical properties of these SAMs have been probed by various surface-sensitive techniques such as contact angle goniometry, ellipsometry, and infrared reflection-absorption spectroscopy. The specific molecular organization of proteins and protein complexes was demonstrated by surface plasmon resonance, confocal laser scanning, and atomic force microscopy. In contrast to the mono-NTA/His6 tag interaction, which has major drawbacks because of its low affinity and fast dissociation, drastically improved stability of protein binding by these multivalent chelator surfaces was observed. The immobilized histidine-tagged proteins are uniformly oriented and retain their function. At the same time, proteins can be removed from the chip surface under mild conditions (switchability). This new platform for switchable and oriented immobilization should assist proteome-wide wide analyses of protein-protein interactions as well as structural and single-molecule studies.

High-capacity binding of proteins by poly(acrylic acid) brushes and their derivatives

Polymeric coatings with high protein-binding capacities are important for increasing the output of affinity-based protein purification and decreasing the detection limits of antibody microarrays. This report describes the use of thick poly(acrylic acid) (PAA) brushes to immobilize as much as 80 monolayers of protein. The brushes were prepared using a recently developed procedure that allows polymerization of 100-nm-thick poly(tert-butyl acrylate) films from a surface in just 5 min along with hydrolysis of these films to PAA in 15 min. Covalent binding of bovine serum albumin (BSA) to PAA brushes that were activated using standard coupling agents, however, resulted in immobilization of less than two monolayers of BSA because of competitive hydrolysis of the esters in the activated film. In contrast, derivatization of PAA with nitrilotriacetate (NTA)-Cu2+ complexes yielded films capable of binding many monolayers of protein via metal-ion affinity interactions. For example, derivatization of 55-nm-thick PAA films with NTA-Cu2+ allowed immobilization of about 15 monolayers (5.8 microg/cm2 or 58 nm) of BSA. The binding capacity was even higher for myoglobin (7.7 microg/cm2) and anti-IgG (9.6 microg/cm2). Remarkably, electrostatic adsorption of lysozyme in 55-nm-thick, underivatized PAA resulted in as much as 80 monolayers (16.2 microg/cm2 or 162 nm) of adsorbed protein. Polymer synthesis, derivatization, and swelling, as well as BSA immobilization kinetics and thermodynamics were characterized using reflectance FT-IR spectroscopy, ellipsometry, and protein assays.

Optical technologies for the read out and quality control of DNA and protein microarrays

Microarray formats have become an important tool for parallel (or multiplexed) monitoring of biomolecular interactions. Surface-immobilized probes like oligonucleotides, cDNA, proteins, or antibodies can be used for the screening of their complementary targets, covering different applications like gene or protein expression profiling, analysis of point mutations, or immunodiagnostics. Numerous reviews have appeared on this topic in recent years, documenting the intriguing progress of these miniaturized assay formats. Most of them highlight all aspects of microarray preparation, surface chemistry, and patterning, and try to give a systematic survey of the different kinds of applications of this new technique. This review places the emphasis on optical technologies for microarray analysis. As the fluorescent read out of microarrays is dominating the field, this topic will be the focus of the review. Basic principles of labeling and signal amplification techniques will be introduced. Recent developments in total internal reflection fluorescence, resonance energy transfer assays, and time-resolved imaging are addressed, as well as non-fluorescent imaging methods. Finally, some label-free detection modes are discussed, such as surface plasmon microscopy or ellipsometry, since these are particularly interesting for microarray development and quality control purposes.

Protein and peptide arrays: recent trends and new directions

Microarrays of proteins and peptides make it possible the screening of thousands of binding events in a parallel and high throughput fashion; therefore they are emerging as a powerful tool for proteomics and clinical assays. The complex nature of Proteome, the wide dynamic range of protein concentration in real samples and the critical role of immobilized protein orientation must be taken into account to maximize the utility of protein microarrays. Immobilization strategy and designing of an ideal local chemical environment on the solid surface are both essential for the success of a protein microarray experiment. This review article will focus on protein and peptide arrays highlighting their technical challenges and presenting new directions by means of a set of selected recent applications.

Protein microarrays on hybrid polymeric thin films prepared by self-assembly of polyelectrolytes for multiple-protein immunoassays

We report here the development and characterization of protein microarrays fabricated on nanoengineered 3-D polyelectrolyte thin films (PET) deposited on glass slide by consecutive adsorption of polyelectrolytes via self-assembly technique. Antibodies or antigens were immobilized in the PET-coated glass slides by electrostatic adsorption and entrapment of porous structure of the 3-D polymer film and thus establishing a platform for parallel analysis. Both antigen and antibody microarrays were fabricated on the PET-coated slides, and direct and indirect immunoassays on protein microarrays for multiple-analyte detection were demonstrated. Microarrays produced on these PET-coated slides have consistent spot morphology and provide performance features needed for proteomic analysis. The protein microarrays on the PET films provide LOD as low as 6 pg/mL and dynamic ranges up to three orders of magnitude, which are wider than the protein microarrays fabricated on aldehyde and poly-L-lysine functionalized slides. The PET films constructed by self-assembly technique in aqueous solution is green chemistry based, cost-effective method to generate 3-D thin film coatings on glass surface, and the coated slide is well suited for immobilizing many types of biological molecules so that a wide variety of microarray formats can be developed on this type of slide.

Effect of mixing on reaction–diffusion kinetics for protein hydrogel-based microchips

Protein hydrogel-based microchips are being developed for high-throughput evaluation of the concentrations and activities of various proteins. To shorten the time of analysis, the reaction-diffusion kinetics on gel microchips should be accelerated. Here we present the results of the experimental and theoretical analysis of the reaction-diffusion kinetics enforced by mixing with peristaltic pump. The experiments were carried out on gel-based protein microchips with immobilized antibodies under the conditions utilized for on-chip immunoassay. The dependence of fluorescence signals at saturation and corresponding saturation times on the concentrations of immobilized antibodies and antigen in solution proved to be in good agreement with theoretical predictions. It is shown that the enhancement of transport with peristaltic pump results in more than five-fold acceleration of binding kinetics. Our results suggest useful criteria for the optimal conditions for assays on gel microchips to balance high sensitivity and rapid fluorescence saturation kinetics.

Three Distinct Read-Out Modes for Enzyme Activity Can Operate in a Semi-Wet Supramolecular Hydrogel

Assays of hydrolytic enzyme activity, such as of glycosidases and phosphatase, as well as several proteases, using a semi-wet supramolecular hydrogel array composed of a glycosylated amino acetate are described. It has been demonstrated that the microcavity formed by gel fibrils is suitable to immobilize native enzymes without denaturation under semi-wet conditions, and thus the nanofiber has been rationally used as a sensing domain to monitor enzymatic reactions. By using a fluorogenic substrate, reducing the size of the hydrogel can significantly improve the problem of suppressed diffusion within the gel matrix thus making the hydrogel a promising semi-wet matrix for evaluating enzyme activity. Confocal laser scanning microscopy observations have shown that an environmentally sensitive fluorescent probe accumulates in the hydrophobic domain of the gel fiber and emits fluorescence more strongly upon hydrolytic cleavage of the substrate peptides. Not only a simple environmentally sensitive probe but also a FRET (fluorescence resonance energy transfer)-type read-out mode can be devised to analyze the enzymatic hydrolysis-triggered redistribution of the probe between the nanospace and the nanofiber to accomplish a more clearly distinguished enzyme assay. Thus, it is clear that three distinct read-out modes, that is, 1) fluorogenic substrates, 2) substrates bearing an environmentally sensitive probe, or 3) a substrate exhibiting FRET, can operate under the semi-wet hydrogel conditions used in these investigations. In addition, owing to the unique properties of the present supramolecular hydrogel in semi-wet conditions, that is, its phase-segregation properties and dynamics, the supramolecular substrate/enzyme array has successfully been used for high-throughput screening of single and multiple enzymes based on their activity, lysate analysis, and quantitative evaluation of inhibitor potency and selectivity.

Comparison of antibody array substrates and the use of glycerol to normalize spot morphology

Antibody microarrays are a high-throughput proteomic technology used to examine the expression of multiple proteins in complex solutions. Antibody microarrays can be manufactured on a variety of commercially available activated glass or coated slides. The goal of this study was to compare Hydrogeltrade mark, nitrocellulose, aldehyde-silane and epoxy-silane slides to determine the amount of antibody bound. The optimal substrate was defined as one that bound the greatest amount of antibody with minimal background. Our studies found that epoxy-silane enhanced surface (ES) slides gave the greatest degree of binding along with a minimal background. However, larger antibody microarrays showed variability in spot size, high intra-spot coefficient of variation and drying artifacts. Increasing the amount of glycerol in the spotting buffer caused a dose-dependent improvement in overall spot morphology. Glycerol was tested on 128 different antibodies and showed decreased: mean spot diameter, intra-spot coefficient of variation and drying artifacts. These studies revealed that the optimal slide substrate was epoxy-silane ES microarray slides. Furthermore, glycerol could normalize spot size, decrease intra-spot coefficient of variability, decrease drying artifacts and increase antibody-spotting density.

Use of Porous Membranes Modified with Polyelectrolyte Multilayers as Substrates for Protein Arrays with Low Nonspecific Adsorption

Coating of substrates with polyelectrolyte multilayers terminated with poly(acrylic acid) (PAA) followed by activation of the free -COOH groups of PAA provides a surface that readily reacts with amine groups to allow covalent immobilization of antibodies. The use of this procedure to prepare arrays of antibodies in porous alumina supports facilitates construction of a flow-through system for analysis of fluorescently labeled antigens. Detection limits in the analysis of Cy5-labeled IgG are 0.02 ng/mL because of the high surface area of the alumina membrane, and the minimal diameter of the substrate pores results in binding limited by kinetics, not mass transport. Moreover, PAA-terminated films resist nonspecific protein adsorption, so blocking of antibody arrays with bovine serum albumin is not necessary. These microarrays are capable of effective analysis in 10% fetal bovine serum.

Hydrogel glycan microarrays

The technology of hydrogel microchips manufacturing, which was developed previously for covalent immobilization of DNA and proteins, was applied for the preparation of glycochips and combined glyco/protein chips. Microchips consist of hydrogel drops separated with hydrophobic surface. Spacered amino-saccharides and polyacrylamide glycoconjugates were used for immobilization. Gel elements were approximately 1 nl in volume (150 microm in diameter and 25 microm in height), and the amount of covalently immobilized saccharide in the glycoarray was 0.4-1.7 pmol per gel element. Hydrogel glycan microchips were used for quantitative assay of antibodies against blood group antigens and assay of lectins with fluorescent detection. In all cases, only specific interaction with chip-immobilized saccharides was observed, whereas the background signal was very low. The detection limit of on-chip assays was comparable to that of the standard 96-well plate assays. Mixing of reaction solution allowed us to decrease the duration of the assays significantly: 2-3 h for incubation and development steps and 10 min for washing. A method for determination of association constants for binding of compounds with chip-immobilized ligands from the kinetics of their binding is proposed. Combined microchips containing different types of biomolecules can be designed and used for simultaneous detection of different compounds.

Peptide microarrays for the characterization of antigenic regions of human chromogranin A

Microarraying peptides is a powerful proteomics technique for studying molecular recognition events. Since peptides have small molecular mass, they are not easily accessible when adsorbed onto solid supports. Moreover, peptides can lack a well-defined three-dimensional structure, and therefore a correct orientation is essential to promote the interaction with their target. In this work, we investigated the suitability as a peptide array substrate of a glass slide coated with a copolymer of N,N-dimethylacrylamide, N,N-acryloyloxysuccinimide, and [3-(methacryloyl-oxy)propyl]trimethoxysilyl. This polymeric surface was used as substrate for peptides in the characterization of linear antigenic sites of human chromogranin A, a useful tissue and serum marker for neuroendocrine tumors and a precursor of many biologically active peptides. The microarray support provided sufficient accessibility of the ligand, with no need for a spacer, as the polymer chains prevent interaction of immobilized peptides with substrate. In addition, the polymeric surface constitutes an aqueous micro-environment in which linear epitopes are freely exposed despite peptide random orientation. The results reported in this article are in accordance with those obtained in conventional ELISA assays using biotinylated and non-biotinylated peptides.

Miniaturization in functional genomics and proteomics

Proteins are the key components of the cellular machinery responsible for processing changes that are ordered by genomic information. Analysis of most human proteins and nucleic acids is important in order to decode the complex networks that are likely to underlie many common diseases. Significant improvements in current technology are also required to dissect the regulatory processes in high-throughtput and with low cost. Miniaturization of biological assays is an important prerequisite to achieve these goals in the near future.

Cooperation between Artificial Receptors and Supramolecular Hydrogels for Sensing and Discriminating Phosphate Derivatives

This study has successfully demonstrated that the cooperative action of artificial receptors with semi-wet supramolecular hydrogels may produce a unique and efficient molecular recognition device not only for the simple sensing of phosphate derivatives, but also for discriminating among phosphate derivatives. We directly observed by confocal laser scanning microscopy that fluorescent artificial receptors can dynamically change the location between the aqueous cavity and the hydrophobic fibers upon guest-binding under semi-wet conditions provided by the supramolecular hydrogel. On the basis of such a guest-dependent dynamic redistribution of the receptor molecules, a sophisticated means for molecular recognition of phosphate derivatives can be rationally designed in the hydrogel matrix. That is, the elaborate utilization of the hydrophobic fibrous domains, as well as the water-rich hydrophilic cavities, enables us to establish three distinct signal transduction modes for phosphate sensing: the use of (i) a photoinduced electron transfer type of chemosensor, (ii) an environmentally sensitive probe, and (iii) an artificial receptor displaying a fluorescence resonance energy transfer type of fluorescent signal change. Thus, one can selectively sense and discriminate the various phosphate derivatives, such as phosphate, phospho-tyrosine, phenyl phosphate, and adenosine triphosphate, using a fluorescence wavelength shift and a seesaw type of ratiometric fluorescence change, as well as a simple fluorescence intensity change. It is also shown that an array of the miniaturized hydrogel is promising for the rapid and high-throughput sensing of these phosphate derivatives.

Evanescent wave fluorescence biosensors

Since discovery and first use in the mid-1970s, evanescent wave fluorescence biosensors have developed into a diverse range of instruments, each designed to meet a particular detection need. In this review, we provide a brief synopsis of what evanescent wave fluorescence biosensors are, how they work, and how they are used. In addition, we have summarized the important patents that have impacted the evolution from laboratory curiosities to fully automated commercial products. Finally, we address the critical issues that evanescent wave fluorescence biosensors will face in the coming years.

Quantitative immunoassay of biotoxins on hydrogel-based protein microchips

Three-dimensional gel-based microchips with immobilized proteins were used for quantitative immunoassay of a series of plant (ricin and viscumin) and bacterial (staphylococcal enterotoxin B, tetanus and diphtheria toxins, and lethal factor of anthrax) toxins. It was shown that different types of immunoassays (direct, competitive, and sandwich type) could be carried out on gel microchips. As shown by confocal microscope studies, antigen-antibody interactions involving the formation of tertiary antibody-antigen-antibody complex occur in the whole volume of microchip gel elements. Sandwich assay on microchips with immobilized antibodies provided the highest sensitivity of detection (0.1 ng/ml for ricin). Antibodies labeled with fluorescent dyes, horseradish peroxidase conjugates, or biotinylated antibodies with subsequent treatment with labeled avidin were used as developing antibodies. The results of immunoassays were recorded using fluorescence, chemiluminescence, or matrix-assisted laser desorption ionization mass spectrometry directly from microchip gel elements. Gel microchips with immobilized capture antibodies were used to analyze the sample simultaneously for the presence of all six biotoxins with the same sensitivity as that for any single toxin.

Antibody microarray for correlating cell phenotype with surface marker

To correlate cell surface markers with the cell phenotype, an antibody microarray prepared by covalently immobilizing antibodies onto a cellulose membrane and subsequent immunocytochemical staining were employed. The direct binding assay of a lymphoblastic leukemia cell line on the microarray showed that the immobilized antibody served to capture cells expressing the specific antigen. The density of bound cells increased linearly with an increasing content of antigen-expressing cells in suspension. The method was further applied to the analysis of surface antigens expressed on neural stem cells. A binding assay was performed with neural cells obtained from the neurosphere culture of the rat fetal striatum on a microarray spotted with eight kinds of antibodies and four different proteins, followed by immunocytochemical staining of cells bound to the microarray using antibodies to the intracellular markers of immature (nestin and vimentin) and mature (beta-tubulin III and glial fibrillary acidic protein) neural cells. As a result, the phenotype of bound cells could be correlated to surface antigen expression, which illustrated the potential of the solid-phase cytometry developed here for the identification of surface markers.

A new polymeric coating for protein microarrays

Despite the increasing interest in arraying proteins in a high-density format, several technical issues still impede the development of protein microarray technology. One of the major problems is the availability of substrates that are able to bind native proteins with high density. In this study, we investigated the suitability of a novel surface as a support for protein microarrays. A polymeric glass coating is obtained by physical adsorption of a N,N-dimethylacrylamide (DMA), N,N-acryloyloxysuccinimide (NAS), and [3-(methacryloyl-oxy)propyl]trimethoxysilyl (MAPS) copolymer. The coating procedure provides a fast and inexpensive method of producing hydrophilic functional surfaces. The slide performance was investigated in a protein-protein interaction experiment and in the assessment of rheumatoid factor (RF) in human serum samples. The results demonstrate that the ligands immobilized on the polymeric surface maintain an active conformation and are easily accessible, providing a detection limit of 54amol/spot. Moreover, in the RF assay, after hybridization with the sera, the slides have a low background, leading to a detection limit of 900amol/spot.

Enzymatic activity on a chip: The critical role of protein orientation

We compare the catalytic activities of enzymes immobilized on silicon surfaces with and without orientation. While oriented sulfotransferases selectively immobilized on an otherwise zero-background surface via 6xHis tags faithfully reflect activities of solution phase enzymes, those with random orientation on the surface do not. This finding demonstrates that controlling the orientation of immobilized protein molecules and designing an ideal local chemical environment on the solid surface are both essential if protein microarrays are to be used as quantitative tools in biomedical research.