Oxygenation strategies for encapsulated islet and beta cell transplants

Human allogeneic islet transplantation (ITx) is emerging as a promising treatment option for qualified patients with type 1 diabetes. However, widespread clinical application of allogeneic ITx is hindered by two critical barriers: the need for systemic immunosuppression and the limited supply of human islet tissue. Biocompatible, retrievable immunoisolation devices containing glucose-responsive insulin-secreting tissue may address both critical barriers by enabling the more effective and efficient use of allogeneic islets without immunosuppression in the near-term, and ultimately the use of a cell source with a virtually unlimited supply, such as human stem cell-derived β-cells or xenogeneic (porcine) islets with minimal or no immunosuppression. However, even though encapsulation methods have been developed and immunoprotection has been successfully tested in small and large animal models and to a limited extent in proof-of-concept clinical studies, the effective use of encapsulation approaches to convincingly and consistently treat diabetes in humans has yet to be demonstrated. There is increasing consensus that inadequate oxygen supply is a major factor limiting their clinical translation and routine implementation. Poor oxygenation negatively affects cell viability and β-cell function, and the problem is exacerbated with the high-density seeding required for reasonably-sized clinical encapsulation devices. Approaches for enhanced oxygen delivery to encapsulated tissues in implantable devices are therefore being actively developed and tested. This review summarizes fundamental aspects of islet microarchitecture and β-cell physiology as well as encapsulation approaches highlighting the need for adequate oxygenation; it also evaluates existing and emerging approaches for enhanced oxygen delivery to encapsulation devices, particularly with the advent of β-cell sources from stem cells that may enable the large-scale application of this approach.

Design of Tissue-engineered Nanoscaffold Through Self-assembly of Peptide Amphiphile

In order to mimic in vivo topography of the native tissue created by extracellular matrix (ECM) components, which make up all soft tissues, the surface features of each biomaterial should be considered as a nanodimensional structure. In this study, an artificial ECM was designed to mimic the nanostructured topography created by ECM components in native tissue. The proliferation and differentiation of mesenchymal stem cells (MSCs) was investigated in a three dimensional (3-D) network of nanofibers formed by the self-assembly of peptide amphiphile (PA) molecules. PA was synthesized by standard solid phase chemistry that ends with the alkylation of the NH2 terminus of the peptide. The sequence of arginine-glycine-aspartic acid (RGD) was included in peptide design as well. A 3-D network of nanofibers was formed by mixing MSC suspensions in a media with dilute aqueous solution of PA. The attachment, proliferation and osteogenic differentiation of MSCs were influenced by the self-assembled PA nanofibers as the cell scaffold and the values were significantly high compared with those in the static culture (2-D tissue culture plate).

Modeling human carcinomas: physiologically relevant 3D models to improve anti-cancer drug development

Anti-cancer drug development is inefficient, mostly due to lack of efficacy in human patients. The high fail rate is partly due to the lack of predictive models or the inadequate use of existing preclinical test systems. However, progress has been made and preclinical models were improved or newly developed, which all account for basic features of solid cancers, three-dimensionality and heterotypic cell interaction. Here we give an overview of available in vivo and in vitro models of cancer, which meet the criteria of being 3D and mirroring human tumor-stroma interactions. We only focus on drug response models without touching models for pharmacokinetic and dynamic, toxicity or delivery aspects.

Nutrient regulation by continuous feeding removes limitations on cell yield in the large-scale expansion of Mammalian cell spheroids

Cellular therapies are emerging as a standard approach for the treatment of several diseases. However, realizing the promise of cellular therapies across the full range of treatable disorders will require large-scale, controlled, reproducible culture methods. Bioreactor systems offer the scale-up and monitoring needed, but standard stirred bioreactor cultures do not allow for the real-time regulation of key nutrients in the medium. In this study, β-TC6 insulinoma cells were aggregated and cultured for 3 weeks as a model of manufacturing a mammalian cell product. Cell expansion rates and medium nutrient levels were compared in static, stirred suspension bioreactors (SSB), and continuously fed (CF) SSB. While SSB cultures facilitated increased culture volumes, no increase in cell yields were observed, partly due to limitations in key nutrients, which were consumed by the cultures between feedings, such as glucose. Even when glucose levels were increased to prevent depletion between feedings, dramatic fluctuations in glucose levels were observed. Continuous feeding eliminated fluctuations and improved cell expansion when compared with both static and SSB culture methods. Further improvements in growth rates were observed after adjusting the feed rate based on calculated nutrient depletion, which maintained physiological glucose levels for the duration of the expansion. Adjusting the feed rate in a continuous medium replacement system can maintain the consistent nutrient levels required for the large-scale application of many cell products. Continuously fed bioreactor systems combined with nutrient regulation can be used to improve the yield and reproducibility of mammalian cells for biological products and cellular therapies and will facilitate the translation of cell culture from the research lab to clinical applications.

Oxygen consumption in T-47D cells immobilized in alginate

OBJECTIVES

Encapsulation or entrapment of cells is increasingly being used in a wide variety of scientific studies for tissue engineering and development of novel medical devices. The effect on cell metabolism of such systems is, in general, not well characterized. In this work, a simple system for monitoring respiration of cells embedded in 3-D alginate cultures was characterized.

MATERIALS AND METHODS

T-47D cells were cultured in alginate gels. Oxygen concentration curves were recorded within cell-gel constructs using two different sensor systems, and cell viability and metabolic state were characterized using confocal microscopy and commercially available stains.

RESULTS

At sufficient depth within constructs, recorded oxygen concentration curves were not significantly influenced by influx of oxygen through cell-gel layers and oxygen consumption rate could be calculated simply by dividing oxygen loss in the system per time, by the number of cells. This conclusion was supported by a 3-D numeric simulation. For the T-47D cells, the oxygen consumption rate was found to be 61 ± 6 fmol/cell/h, 3-4 times less than has previously been found for these cells, when grown exponentially in monolayer culture.

CONCLUSIONS

The experimental set-up presented here may be varied in multiple ways by changing the cell-gel construct 3-D microenvironment, easily allowing investigation of a variety of factors on cell respiration.

Islet assessment for transplantation

PURPOSE OF REVIEW

There is a critical need for meaningful viability and potency assays that characterize islet preparations for release prior to clinical islet cell transplantation. Development, testing, and validation of such assays have been the subject of intense investigation for the last decade. These efforts are reviewed, highlighting the most recent results while focusing on the most promising assays.

RECENT FINDINGS

Assays based on membrane integrity do not reflect true viability when applied to either intact islets or dispersed islet cells. Assays requiring disaggregation of intact islets into individual cells for assessment introduce additional problems of cell damage and loss. Assays evaluating mitochondrial function, specifically mitochondrial membrane potential, bioenergetic status, and cellular oxygen consumption rate, especially when conducted with intact islets, appear most promising in evaluating their quality prior to islet cell transplantation. Prospective, quantitative assays based on measurements of oxygen consumption rate with intact islets have been developed, validated, and their results correlated with transplant outcomes in the diabetic nude mouse bioassay.

CONCLUSION

More sensitive and reliable islet viability and potency tests have been recently developed and tested. Those evaluating mitochondrial function are most promising, correlate with transplant outcomes in mice, and are currently being evaluated in the clinical setting.

Use of magnetic nanoparticles to monitor alginate-encapsulated betaTC-tet cells

Noninvasive monitoring of tissue-engineered constructs is an important component in optimizing construct design and assessing therapeutic efficacy. In recent years, cellular and molecular imaging initiatives have spurred the use of iron oxide-based contrast agents in the field of NMR imaging. Although their use in medical research has been widespread, their application in tissue engineering has been limited. In this study, the utility of monocrystalline iron oxide nanoparticles (MIONs) as an NMR contrast agent was evaluated for betaTC-tet cells encapsulated within alginate/poly-L-lysine/alginate (APA) microbeads. The constructs were labeled with MIONs in two different ways: 1) MION-labeled betaTC-tet cells were encapsulated in APA beads (i.e., intracellular compartment), and 2) MION particles were suspended in the alginate solution prior to encapsulation so that the alginate matrix was labeled with MIONs instead of the cells (i.e., extracellular compartment). The data show that although the location of cells can be identified within APA beads, cell growth or rearrangement within these constructs cannot be effectively monitored, regardless of the location of MION compartmentalization. The advantages and disadvantages of these techniques and their potential use in tissue engineering are discussed.

Quality control for clinical islet transplantation: organ procurement and preservation, the islet processing facility, isolation, and potency tests

Pancreatic islet transplantation has become one of the ideal treatments for patients with type 1 diabetes mellitus due to improvements in isolation techniques and immunosuppression regimens. In order to ensure the safety and rights of patients, isolated islets need to meet the criteria for regulation as both a biological product and a drug product. For the constant success of transplantation, therefore, all investigators involved in clinical islet transplantation must strive to ensure the safety, purity, and potency of islets in all the phases of clinical islet isolation and transplantation. In this review, we summarize the quality control for clinical islet isolation and transplantation, and the latest topics of pre-transplant islet assessment.

Three-dimensional Cultures of Rat Pancreatic RIN-5F Cells in Porous PLGA-collagen Hybrid Scaffolds

Three-dimensional cultures of pancreatic islet cells in porous scaffolds or hydrogels have been constructed as a biohybrid artificial pancreas. A thin mesh of a PLGA-collagen hybrid was used to culture rat RIN-5F cells. The hybrid mesh was coated with laminin, fibronectin, vitronectin, type IV collagen, and poly(L-lysine) were evaluated and mesh without coating was used as a control. Cell adhered and proliferated on all of the coated and uncoated meshes. The cells formed spheroids in the uncoated, poly(L-lysine)-, fibronectin-, vitronectin-, and type IV collagen-coated hybrid meshes, while forming a layered structure in the laminin-coated hybrid mesh. Cell adhesion on the coated PLGA-collagen hybrid meshes was higher than that for the uncoated hybrid mesh. The laminin-coated hybrid mesh showed the greatest level of adhesion. The insulin secretion capacity of RIN-5F cells was at the same level for all coated and uncoated PLGA-collagen hybrid meshes and higher than that of cells cultured on cell culture plates. The 3D cultured PLGA-collagen hybrid meshes promoted insulin production capacity. Gene expression analysis showed that genes encoding insulin I, insulin II, and the pancreatic transcription factor PDX-1 (pancreas/duodenum homeobox 1) was expressed. These results indicate that the PLGA-collagen hybrid meshes support adhesion, proliferation, and differentiation of RIN-5F cells that allows culturing pancreatic islet cells on 3D constructs.

Materials in particulate form for tissue engineering. 2. Applications in bone

Materials in particulate form have been the subjects of intensive research in view of their use as drug delivery systems. While within this application there are still issues to be addressed, these systems are now being regarded as having a great potential for tissue engineering applications. Bone repair is a very demanding task, due to the specific characteristics of skeletal tissues, and the design of scaffolds for bone tissue engineering presents several difficulties. Materials in particulate form are now seen as a means of achieving higher control over parameters such as porosity, pore size, surface area and the mechanical properties of the scaffold. These materials also have the potential to incorporate biologically active molecules for release and to serve as carriers for cells. It is believed that the combination of these features would create a more efficient approach towards regeneration. This review focuses on the application of materials in particulate form for bone tissue engineering. A brief overview of bone biology and the healing process is also provided in order to place the application in its broader context. An original compilation of molecules with a documented role in bone tissue biology is listed, as they have the potential to be used in bone tissue engineering strategies. To sum up this review, examples of works addressing the above aspects are presented.

A stirred microchamber for oxygen consumption rate measurements with pancreatic islets

Improvements in pancreatic islet transplantation for treatment of diabetes are hindered by the absence of meaningful islet quality assessment methods. Oxygen consumption rate (OCR) has previously been used to assess the quality of organs and primary tissue for transplantation. In this study, we describe and characterize a stirred microchamber for measuring OCR with small quantities of islets. The device has a titanium body with a chamber volume of about 200 microL and is magnetically stirred and water jacketed for temperature control. Oxygen partial pressure (pO(2)) is measured by fluorescence quenching with a fiber optic probe, and OCR is determined from the linear decrease of pO(2) with time. We demonstrate that measurements can be made rapidly and with high precision. Measurements with betaTC3 cells and islets show that OCR is directly proportional to the number of viable cells in mixtures of live and dead cells and correlate linearly with membrane integrity measurements made with cells that have been cultured for 24 h under various stressful conditions.

Human islet oxygen consumption rate and DNA measurements predict diabetes reversal in nude mice

There is a need for simple, quantitative and prospective assays for islet quality assessment that are predictive of islet transplantation outcome. The current state-of-the-art athymic nude mouse bioassay is costly, technically challenging and retrospective. In this study, we report on the ability of 2 parameters characterizing human islet quality: (1) oxygen consumption rate (OCR), a measure of viable volume; and (2) OCR/DNA, a measure of fractional viability, to predict diabetes reversal in nude mice. Results demonstrate that the probability for diabetes reversal increases as the graft's OCR/DNA and total OCR increase. For a given transplanted OCR dose, diabetes reversal is strongly dependent on OCR/DNA. The OCR and OCR/DNA (the 'OCR test') data exhibit 89% sensitivity and 77% specificity in predicting diabetes reversal in nude mice (n = 86). We conclude that the prospective OCR test can effectively replace the retrospective athymic nude mouse bioassay in assessing human islet quality prior to islet transplantation.

Monitoring of dissolved oxygen and cellular bioenergetics within a pancreatic substitute

This work investigated the use of nuclear magnetic resonance (NMR) spectroscopy in combination with a mathematical model of an encapsulated cell system as a method for rapidly assessing the status of a pancreatic substitute. To validate this method, an in vitro experiment was performed in which the encapsulated cells were perfused in an NMR-compatible system and the dissolved oxygen (DO) concentration of the perfusing medium was lowered from 0.20 to 0.05 mM, then returned to 0.20 mM in a stepwise fashion. The cellular metabolic activity and bioenergetics were evaluated by measuring the oxygen consumption rate (via DO sensors) and nucleotide triphosphate levels (via (31)P NMR). By incorporating a perfluorocarbon emulsion into the alginate beads, the cellular oxygenation state was monitored by measuring the average intrabead DO (AIDO) concentration by (19)F NMR. The in vitro measurements were then compared with model predictions based on the measured external DO concentration and time. Model-predicted cell growth and AIDO closely matched the experimentally acquired data. As the DO concentrations both external to and within the pancreatic substitute are needed to apply this methodology in vivo, the feasibility of measuring the DO concentration from two distinct bead populations implanted in the peritoneal cavity of mice was established. It is concluded that PFC incorporation and (19)F NMR measurements, in combination with a mechanistic model of the encapsulated system, allow the tracking of the state of a pancreatic substitute in vitro and potentially in vivo.

Modeling of encapsulated cell systems

Tissue engineered substitutes consisting of cells in biocompatible materials undergo remodeling with time as a result of cell growth and death processes. With inert matrices that do not directly influence cell growth, remodeling is driven mainly by the concentration of dissolved oxygen (DO). Insulin-secreting cell lines encapsulated in alginate-based beads and used as a pancreatic substitute represent such a case. Beads undergo remodeling with time so that an initially homogeneous distribution of cells is eventually replaced by a dense peripheral ring of primarily viable cells, whereas inner cells are mostly necrotic. This paper develops and analyzes a mathematical model of an encapsulated cell system of spherical geometry that tracks the viable and dead cell densities and the concentration of DO within the construct as functions of radial position and time. Model simulations are compared with experimental histology data on cell distribution. Correlations are then developed between the average intrabead DO concentration (AIDO) and the total viable cell number, as well as between AIDO and the radial cell and DO distributions in beads. As AIDO can be measured experimentally by incorporating a perfluorocarbon emulsion in the beads and acquiring (19)F nuclear magnetic resonance (NMR) spectroscopic data, these correlations can be used to track the remodeling that occurs in the construct in vitro and potentially in vivo. The usefulness of mathematical models in describing the dynamic changes that occur in tissue constructs with time, and the value of these models at obtaining additional information on the system when used interactively with experimental measurements, are discussed.

Differential levels of dendritic cell maturation on different biomaterials used in combination products

Immature dendritic cells (iDCs) were derived from human peripheral blood monocytes, and treated with films of biomaterials commonly used in combination products (e.g., tissue engineered constructs or vaccines) to assess the resultant dendritic cell (DC) maturation compared to positive control of lipopolysaccharide (LPS) treatment for DC maturation or negative control of untreated iDCs. The following biomaterials were tested: alginate, agarose, chitosan, hyaluronic acid, 75:25 poly(lactic-co-glycolic acid) (PLGA). The effect of DC culture on these films was undertaken to identify biomaterials which support DC maturation and those biomaterials that did not. Dendritic cells treated with chitosan or PLGA (agarose to a lesser extent) films increased expression levels of CD86, CD40, and HLA-DQ, compared to control iDCs, similar to LPS-matured DCs, whereas DCs treated with alginate or hyaluronic acid films decreased their expression levels of these same molecules. In summary, a differential effect of the biomaterial on which iDCs were cultured was observed as far as the extent of induced DC maturation. The effect of biomaterials on DC maturation, and the associated adjuvant effect, is a novel biocompatibility selection and design criteria for biomaterials to be used in combination products in which immune consequences are potential complications or outcomes.

Effects of growth regulation on conditionally-transformed alginate-entrapped insulin secreting cell lines in vitro

The ability to control cell growth is an issue of critical importance for the use of transformed beta-cell lines within a bioartificial pancreas. Such control can be achieved either by entrapping the cells in a biomaterial that can inhibit cell proliferation or by genetically modifying the cells to regulate growth. Integrating tetracycline-off or -on operon systems into murine insulinoma cell lines (betaTC-tet and R7T1, respectively) allows cell growth regulation upon exposure to tetracycline (TC) or its derivative doxycycline (Dox), respectively. However, the effects of this regulatory approach on the long-term phenotypic metabolic and secretory stability of alginate-entrapped cells have yet to be thoroughly investigated. In this study, cultures of betaTC-tet and R7T1 cells entrapped in alginate beads were allowed to grow freely, or were growth-regulated, either at the onset, or after 20 days of growth. The data show that growth regulation of alginate-entrapped cells is achievable with chronic administration of the regulatory compound in a concentration-dependent manner. However, as these cultures age, the amount of insulin released does not always reflect the metabolic and histological characteristics of the cultures. This change, coupled with a loss of glucose stimulated insulin secretion in the Dox treated R7T1 cell line, indicate a phenotypic shift of cells with an activated tet-operon. These observations have implications on the selection and long-term function of three-dimensional bioartificial pancreatic constructs that include conditionally transformed beta-cell lines.

Effects of alginate encapsulation on mitochondrial activity

The long-term objective of our research is to study the biochemical consequences of primary genetic defects of the Pyruvate Dehydrogenase Complex, a key mitochondrial enzyme complex, by NMR spectroscopy. An established method to obtain energetic and metabolic information from intact cells involves the use of 31P and 13C NMR spectroscopic techniques. NMR spectra from live and fully functional cells can be obtained from cells encapsulated within alginate beads and maintained in a perfusion bioreactor throughout the NMR experiment. However, before spectroscopic studies can commence, the effects of alginate encapsulation on the general metabolism and mitochondrial activity of fibroblasts need to be determined. in this study we report glucose consumption and flow cytometry measurements (with the fluorescent markers MitoTracker GreenFM and Nonyl-acridine Orange to determine the mitochondrial status and mass) of healthy human fibroblasts encapsulated in a mannuronic acid-rich alginate matrix. The results show that alginate encapsulation of fibroblasts does not affect the glucose consumption, the mitochondrial integrity, or the mitochondrial mass during 21 days of in vitro culture.

Alginate assessment by NMR microscopy

Alginate hydrogels have long been used to encapsulate cells for the purpose of cell transplantation. However, they also have been criticized because they fail to consistently maintain their integrity for extended periods of time. Two issues of critical importance that have yet to be thoroughly addressed concerning the long-term integrity of alginate/poly-L-lysine/alginate microcapsules are: (i) are there temporal changes in the alginate/poly-L-lysine interaction and (ii) are there temporal changes in the alginate gel structure. NMR microscopy is a non-invasive analytical technique that can address these issues. in this report, we present data to demonstrate the utility of (1)H NMR microscopy to (i) visualize the poly-L-lysine layer in an effort to address the first question, and (ii) to observe temporal changes in the alginate matrix that may represent changes in the gel structure.

Real-time detection of 13C NMR labeling kinetics in perfused EMT6 mouse mammary tumor cells and betaHC9 mouse insulinomas

A method was developed for obtaining high signal-to-noise 13C NMR spectra of intracellular compounds in metabolically active cultured cells. The method allows TCA cycle labeling kinetics to be determined in real time without significant oxygen transport limitations. Cells were immobilized on the surface of nonporous microcarriers that were either uncoated or coated with polypeptides and used in a 12-cm3 packed bed. The methods were tested with two EMT6 mouse mammary tumor cell lines, one strongly adherent and the other moderately adherent, and a weakly adherent mouse insulinoma line (betaHC9). For both EMT6 lines, NTP and oxygen consumption measurements indicated that the number of cells in the spectrometer ranged from 6 x 10(8) to 1 x 10(9). During infusion of [1-13C]glucose, labeling in C-4 glutamate (indicative of flux into the first half of the TCA cycle) could be detected with 15-min resolution. However, labeling for C-3 and C-2 glutamate (indicative of complete TCA cycle activity) was fivefold lower and difficult to quantify. To increase TCA cycle labeling, cells were infused with medium containing [1,6-13C2]glucose. A 2.5-fold increase was observed in C-4 glutamate labeling and C-3 and C-2 glutamate labeling could be monitored with 30-min resolution. Citrate synthase activity was indirectly detected in real time, as [3,4-13C2]glutamate was formed from [2-13C]oxaloacetate and [2-13C]acetate (of acetyl-CoA). Cell mass levels observed with betaHC9 cells were somewhat lower. However, the 13C S/N was sufficient to allow real-time monitoring of the response of intracellular metabolite labeling to a step change in glucose and a combined glutamine/serum pulse.

Intestinal tissue engineering: from regenerative medicine to model systems

BACKGROUND

Tissue engineering is a rapidly emerging field that combines the established disciplines of engineering, biology, and medicine with the goal of fabricating viable tissues and organs. Although initially targeted for applications in regenerative medicine, a novel application of this technology has been to generate experimental model systems for studying biological mechanisms and testing the efficacy of potential therapies.

METHODS

Review and analysis of the literature.

RESULTS AND CONCLUSION

We present the limitations of existing models and provide examples of how tissue engineering has allowed for the generation of new models that may overcome these limitations.

Tissue-culture surfaces with mixtures of aminated and fluorinated functional groups. Part 2. Growth and function of transgenic rat insulinoma cells (betaG I/17)

Interactions of transplantable cells with synthetic polymers can influence the function of biohybrid artificial organs. This study explored growth and secretion of human insulin by betaG I/17 cells cultured on surfaces bearing diamine groups (N2), trifluoropropyl groups (F3) and mixtures of the two. Cells cultured on high-F3 and high-N2 surfaces spread well, grew rapidly and produced >1.8 mol lactate per mol glucose consumed, closely resembling cells grown on the permissive control, glass. On one mixed surface, with a molar ratio of 33 N2 groups:67 F3 groups, cells had a lower lactate/glucose ratio, adopted a rounded form, grew slowly and were quick to form emergent aggregates, similar to cultures on the inhibitory control, untreated polystyrene. Cultures on surfaces with higher F3 content secreted the most insulin and, in the case of the highest-F3 surface, showed improved responsiveness to secretagogues. Hormone secretion was roughly 50% greater when cells were grown on F3 surfaces conditioned by earlier cultures of betaG I/17. Incubation of conditioned surfaces with high concentrations of a polyclonal anti-laminin serum prior to re-plating partially abolished this improvement in secretory function. Polymers bearing trifluoropropyl groups appear to be attractive candidates for use in the artificial endocrine pancreas. Surface coatings that include laminin might promote function of transgenic insulinoma cells in vitro and in vivo.

Islet cell transplantation and other new technologies for treating type 1 diabetes: a paediatric view

Recent advances in diabetes care have facilitated the achievement and maintenance of excellent metabolic control. New insulin pumps and continuous glucose monitoring systems provide cause for optimism that an artificial pancreas may soon be developed. In addition, transplantation biology has advanced to the point where pancreas and islet transplants are being performed with increasing frequency. Recent reports suggest that improved techniques for isolation of islets and immune suppression may allow these procedures to become more commonplace. However, serious questions regarding long-term safety and efficacy need to be answered in older individuals before consideration is given to their more routine use in children and adolescents with diabetes.

In vitro monitoring of total choline levels in a bioartificial pancreas: (1)H NMR spectroscopic studies of the effects of oxygen level

This investigation implements specifically designed solvent-suppressed adiabatic pulses whose properties make possible the long-term monitoring of (1)H NMR detectable metabolites from alginate/poly-l-lysine/alginate (APA)-encapsulated betaTC3 cells. Our encapsulated preparations were maintained in a perfusion bioreactor for periods exceeding 30 days. During this prolonged cultivation period, the cells were exposed to repetitive hypoxic episodes of 4 and 24 h. The ratio of the total choline signal (3.20 ppm) to the reference signal (observed at 0.94 ppm assigned to isoleucine, leucine, and valine) decreased by 8-10% for the 4-h and by 20-32% for the 24-h episodes and returned to its prehypoxic level upon reoxygenation. The decrease in the mean value of total choline to reference signal ratio for three 4-h and two 24-h episodes in two different cultures was highly significant (P<0.01). The rate of recovery by this ratio was slower than the rates of recovery by oxygen consumption, lactate production, or glucose consumption. A step-up in oxygen level led to a new, higher value for the total choline to reference ratio. From spectra of extracts at 400 MHz, it was determined that 63.6% of the total choline signal is due to intracellular phosphorylcholine. Therefore, it is inferred that the observed changes in total choline signal are linked to an oxygen level dependence of the intracellular phosphorylcholine. Several possible mechanisms in which oxygen may influence phosphorylcholine metabolism are suggested. In addition, the implications of these findings to the development of a noninvasive monitoring method for tissue-engineered constructs composed of encapsulated cells are discussed.

Effects of short-term hypoxia on a transformed cell-based bioartificial pancreatic construct

Hypoxia is an adverse condition that can jeopardize the function of a bioartificial pancreatic construct. In this study we have investigated the effects of short-term hypoxic exposure (up to 24 h) on the bioenergetic status, metabolism, and insulin secretion of perfused pancreatic constructs composed of alginate/poly-L-lysine/alginate (APA) encapsulated mouse insulinoma betaTC3 cells. The bioenergetic status of the encapsulated cells was monitored noninvasively with the aid of 31P NMR spectroscopy, while glucose, lactate, and insulin concentrations were measured with off-line assays from media samples removed from the perfusion loop. Our results demonstrate that in freshly prepared constructs insulin secretion was not affected by the hypoxic conditions, although intracellular ATP concentration decreased and glucose consumption increased. Alternatively, in constructs that were maintained in our perfusion system for at least 10 days, identical hypoxic conditions resulted in a decreased insulin secretion concomitant to a decreased intracellular ATP concentration and increased glucose consumption. These results suggest that the effects of hypoxia on a transformed cell-based pancreatic construct are not constant throughout the duration of an in vitro culture. The observed differences are attributed to the significant cell growth and rearrangement that occurs with time during an in vitro culture of the constructs.