1
|
Zheng Q, Hawthorne N, Batteas JD, Espinosa-Marzal RM. Surface Curvature Enhances the Electrotunability of Ionic Liquid Lubrication. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024. [PMID: 38334102 DOI: 10.1021/acs.langmuir.3c03519] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/10/2024]
Abstract
Ionic liquids (ILs) are a promising class of lubricants that allow dynamic friction control at electrified interfaces. In the real world, surfaces inevitably exhibit some degree of roughness, which can influence lubrication. In this work, we deposited single-layer graphene onto 20 nm silica nanoparticle films to investigate the effect of surface curvature and electrostatic potential on both the lubricious behavior and interfacial layering structure of 1-ethyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide on graphene. Normal force and friction force measurements were conducted by atomic force microscopy using a sharp silicon tip. Our results reveal that the friction coefficient at the lubricated tip-graphene contacts significantly depends on surface curvature. Two friction coefficients are measured on graphene peaks and valleys with a higher coefficient measured at lower loads (pressures), whereas only one friction coefficient is measured on smooth graphene. Moreover, the electrotunability of the friction coefficient at low loads is observed to be significantly enhanced in peaks and valleys compared with smooth graphene. This is associated with the promoted overscreening of surface charge on convex interfaces and the steric hindrance at concave interfaces, which leads to more layers of ions (electrostatically) bound to the surface, i.e., thicker boundary films (electrical double layers). This work opens new avenues to control IL lubrication on the nanoscale by combining topographic features and an electric field.
Collapse
Affiliation(s)
- Qianlu Zheng
- Department of Civil and Environmental Engineering, University of Illinois at Urbana─Champaign, Urbana, Illinois 61801, United States
| | - Nathaniel Hawthorne
- Department of Chemistry, Texas A&M University, College Station, Texas 77843, United States
| | - James D Batteas
- Department of Chemistry, Texas A&M University, College Station, Texas 77843, United States
- Department of Materials Science and Engineering, Texas A&M University, College Station, Texas 77843, United States
| | - Rosa M Espinosa-Marzal
- Department of Civil and Environmental Engineering, University of Illinois at Urbana─Champaign, Urbana, Illinois 61801, United States
- Department of Materials Science and Engineering, University of Illinois at Urbana─Champaign, Urbana, Illinois 61801, United States
| |
Collapse
|
2
|
Xie L, Wang J, Lu Q, Hu W, Yang D, Qiao C, Peng X, Peng Q, Wang T, Sun W, Liu Q, Zhang H, Zeng H. Surface interaction mechanisms in mineral flotation: Fundamentals, measurements, and perspectives. Adv Colloid Interface Sci 2021; 295:102491. [PMID: 34332278 DOI: 10.1016/j.cis.2021.102491] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2021] [Revised: 07/16/2021] [Accepted: 07/18/2021] [Indexed: 12/23/2022]
Abstract
As non-renewable natural resources, minerals are essential in a broad range of biological and technological applications. The surface interactions of mineral particles with other objects (e.g., solids, bubbles, reagents) in aqueous suspensions play a critical role in mediating many interfacial phenomena involved in mineral flotation. In this work, we have reviewed the fundamentals of surface forces and quantitative surface property-force relationship of minerals, and the advances in the quantitative measurements of interaction forces of mineral-mineral, bubble-mineral and mineral-reagent using nanomechanical tools such as surface forces apparatus (SFA) and atomic force microscope (AFM). The quantitative correlation between surface properties of minerals at the solid/water interface and their surface interaction mechanisms with other objects in complex aqueous media at the nanoscale has been established. The existing challenges in mineral flotation such as characterization of anisotropic crystal plane or heterogeneous surface, low recovery of fine particle flotation, and in-situ electrochemical characterization of collectorless flotation as well as the future work to resolve the challenges based on the understanding and modulation of surface forces of minerals have also been discussed. This review provides useful insights into the fundamental understanding of the intermolecular and surface interaction mechanisms involved in mineral processing, with implications for precisely modulating related interfacial interactions towards the development of highly efficient industrial processes and chemical additives.
Collapse
Affiliation(s)
- Lei Xie
- School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China; Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Jingyi Wang
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Qiuyi Lu
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Wenjihao Hu
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada; School of Metallurgy and Environment, Central South University, Changsha 410083, China
| | - Diling Yang
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Chenyu Qiao
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Xuwen Peng
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Qiongyao Peng
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Tao Wang
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Wei Sun
- School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China
| | - Qi Liu
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Hao Zhang
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada
| | - Hongbo Zeng
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada.
| |
Collapse
|
3
|
van Engers CD, Lamberty ZD, McGuiggan PM, Frechette J. Template-Stripped Ultra-Smooth Aluminum Films (0.2 nm RMS) for the Surface Forces Apparatus. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021; 37:6556-6565. [PMID: 34009999 DOI: 10.1021/acs.langmuir.1c00899] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
We present a method for the fabrication of ultra-smooth (0.2 nm RMS), aluminum substrates through template stripping (TS). The method relies on the use of mica as a template in combination with thermal evaporation of Al at high (>10 nm/s) rates under vacuum (≤1 × 10-7 Torr). As a reactive metal, Al is usually not considered a viable option for TS off oxide templates. However, under these conditions, the adhesion between the Al film and mica is poor, enabling the removal of the template under water without any mica residue. We verify the absence of mica using atomic force microscopy, X-ray photoelectron spectroscopy, and contact angle measurements. We establish the suitability of these films for surface forces measurements. Multiple-bean interferometry in transmission yields high quality fringes allowing for the measurement of force-distance curves. The adhesion the films to mica is significantly higher than the adhesion of thermally evaporated Al (0.9 nm RMS). Preliminary results suggest that the TS-Al surface displays a higher corrosion resistance. The fabrication method will enable important experiments on this widely used material.
Collapse
Affiliation(s)
- Christian D van Engers
- Department of Chemical and Biomolecular Engineering, Johns Hopkins University, 3400 North Charles Street, Baltimore, Maryland 21218, United States
| | - Zachary D Lamberty
- Department of Chemical and Biomolecular Engineering, Johns Hopkins University, 3400 North Charles Street, Baltimore, Maryland 21218, United States
| | - Patricia M McGuiggan
- Department of Materials Science and Engineering, Johns Hopkins University, 3400 North Charles Street, Baltimore, Maryland 21218, United States
| | - Joelle Frechette
- Department of Chemical and Biomolecular Engineering, Johns Hopkins University, 3400 North Charles Street, Baltimore, Maryland 21218, United States
- Hopkins Extreme Materials Institute, Johns Hopkins University, 3400 North Charles Street, Baltimore, Maryland 21218, United States
| |
Collapse
|
4
|
Duval JF, van Leeuwen HP, Norde W, Town RM. Chemodynamic features of nanoparticles: Application to understanding the dynamic life cycle of SARS-CoV-2 in aerosols and aqueous biointerfacial zones. Adv Colloid Interface Sci 2021; 290:102400. [PMID: 33713994 PMCID: PMC7931671 DOI: 10.1016/j.cis.2021.102400] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/25/2021] [Revised: 02/27/2021] [Accepted: 03/01/2021] [Indexed: 12/23/2022]
Abstract
We review concepts involved in describing the chemodynamic features of nanoparticles and apply the framework to gain physicochemical insights into interactions between SARS-CoV-2 virions and airborne particulate matter (PM). Our analysis is highly pertinent given that the World Health Organisation acknowledges that SARS-CoV-2 may be transmitted by respiratory droplets, and the US Center for Disease Control and Prevention recognises that airborne transmission of SARS-CoV-2 can occur. In our theoretical treatment, the virion is assimilated to a core-shell nanoparticle, and contributions of various interaction energies to the virion-PM association (electrostatic, hydrophobic, London-van der Waals, etc.) are generically included. We review the limited available literature on the physicochemical features of the SARS-CoV-2 virion and identify knowledge gaps. Despite the lack of quantitative data, our conceptual framework qualitatively predicts that virion-PM entities are largely able to maintain equilibrium on the timescale of their diffusion towards the host cell surface. Comparison of the relevant mass transport coefficients reveals that virion biointernalization demand by alveolar host cells may be greater than the diffusive supply. Under such conditions both the free and PM-sorbed virions may contribute to the transmitted dose. This result points to the potential for PM to serve as a shuttle for delivery of virions to host cell targets. Thus, our critical review reveals that the chemodynamics of virion-PM interactions may play a crucial role in the transmission of COVID-19, and provides a sound basis for explaining reported correlations between episodes of air pollution and outbreaks of COVID-19.
Collapse
|
5
|
Guo J, Yang Q, Meng QW, Lau CH, Ge Q. Membrane Surface Functionalization with Imidazole Derivatives to Benefit Dye Removal and Fouling Resistance in Forward Osmosis. ACS APPLIED MATERIALS & INTERFACES 2021; 13:6710-6719. [PMID: 33512147 DOI: 10.1021/acsami.0c22685] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Water contaminated with low concentrations of pollutants is more difficult to clean up than that with high pollutant content levels. Membrane separation provides a solution for removing low pollutant content from water. However, membranes are prone to fouling, losing separation performances over time. Here we synthesized neutral (IM-NH2) and positively charged (IL-NH2) imidazole derivatives to chemically functionalize membranes. With distinct properties, these imidazole grafts could tailor membrane physicochemical properties and structures to benefit forward osmosis (FO) processes for the removal of 20-100 ppm of Safranin O dye-a common dye employed in the textile industry. The water fluxes produced by IM-NH2- and IL-NH2-modified membranes increased by 67% and 122%, respectively, with DI water as the feed compared to that with the nascent membrane. A 39% flux increment with complete dye retention (∼100%) was achieved for the IL-NH2-modified membrane against 100 ppm of Safranin O dye. Regardless of the dye concentration, the IL-NH2-modified membrane exhibited steadily higher permeation performance than the original membrane in long-term experiments. Reproducible experimental results were obtained with the IL-NH2-modified membrane after cleaning with DI water, demonstrating the good antifouling properties and renewability of the newly developed membrane.
Collapse
Affiliation(s)
- Jie Guo
- College of Environment and Resources, Fuzhou University, Fujian 350116, China
| | - Qiaoli Yang
- College of Environment and Resources, Fuzhou University, Fujian 350116, China
| | - Qing-Wei Meng
- College of Environment and Resources, Fuzhou University, Fujian 350116, China
| | - Cher Hon Lau
- School of Engineering, The University of Edinburgh, Robert Stevenson Road, The King's Buildings, Edinburgh EH9 3FB, Scotland, U.K
| | - Qingchun Ge
- College of Environment and Resources, Fuzhou University, Fujian 350116, China
| |
Collapse
|
6
|
Li D, Wang H, Li C, Liang Y, Yan X, Zhang H. Determination and modulation of the typical interactions among dispersed phases relevant to flotation applications: A review. Adv Colloid Interface Sci 2021; 288:102359. [PMID: 33422930 DOI: 10.1016/j.cis.2020.102359] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/05/2020] [Revised: 12/04/2020] [Accepted: 12/24/2020] [Indexed: 11/28/2022]
Abstract
Flotation is a process involving multi-components, multi-scales, and gas-liquid-solid three phases, where the material separation is achieved based on the difference in surface hydrophobicity of various constituents. In a flotation system, fluids are usually regarded as the continuous phase, while the dispersed phases refer to scattered particles, bubbles, and droplets with low solubility as a dispersion that is surrounded by the aqueous environment. Fundamentally, the interactions among dispersed phases exist throughout the flotation process, and play distinct roles during different periods. For example, the liquid collector-solid, solid-solid, bubble-bubble and gas bubble-solid interactions are closely associated with the particle surface modification, particle behavior, bubble size evolution and separation in flotation, respectively. Therefore, the influences of each stage are all worthy of concern, and should be spared sufficient attention, which requires to formulate a horizontal writing structure. In this review, instead of summarizing all available characterization techniques or measurements, certain typical examples or methods were consciously chosen to perform analysis or comparison, aiming to summarize recent studies on the determination and modulation of dispersed phase interactions. The determination on the interactions among dispersed phases is helpful for fundamentally understanding the microcosmic process connotations, and their modulation contributes to firmly providing macroscopic optimization schemes for practical applications. By integrating some typically available theoretical calculations and experimental measurements related to the dispersed phase interactions, the present article is devoted to revealing the influential factors, finding out the current challenges or knowledge gaps, and affording certain references or suggestions for future investigations.
Collapse
Affiliation(s)
- Danlong Li
- National Engineering Research Center for Coal Preparation and Purification, China University of Mining and Technology, 221116 Xuzhou, China; School of Chemical Engineering and Technology, China University of Mining and Technology, 221116 Xuzhou, China
| | - Hainan Wang
- National Engineering Research Center for Coal Preparation and Purification, China University of Mining and Technology, 221116 Xuzhou, China; School of Chemical Engineering and Technology, China University of Mining and Technology, 221116 Xuzhou, China
| | - Chenwei Li
- National Engineering Research Center for Coal Preparation and Purification, China University of Mining and Technology, 221116 Xuzhou, China; School of Chemical Engineering and Technology, China University of Mining and Technology, 221116 Xuzhou, China
| | - Yannan Liang
- National Engineering Research Center for Coal Preparation and Purification, China University of Mining and Technology, 221116 Xuzhou, China; School of Chemical Engineering and Technology, China University of Mining and Technology, 221116 Xuzhou, China
| | - Xiaokang Yan
- National Engineering Research Center for Coal Preparation and Purification, China University of Mining and Technology, 221116 Xuzhou, China; School of Chemical Engineering and Technology, China University of Mining and Technology, 221116 Xuzhou, China
| | - Haijun Zhang
- National Engineering Research Center for Coal Preparation and Purification, China University of Mining and Technology, 221116 Xuzhou, China; School of Chemical Engineering and Technology, China University of Mining and Technology, 221116 Xuzhou, China.
| |
Collapse
|
7
|
Cheng HW, Valtiner M. Forces, structures, and ion mobility in nanometer-to-subnanometer extreme spatial confinements: Electrochemisty and ionic liquids. Curr Opin Colloid Interface Sci 2020. [DOI: 10.1016/j.cocis.2020.02.003] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
8
|
Zeradjanin AR, Polymeros G, Toparli C, Ledendecker M, Hodnik N, Erbe A, Rohwerder M, La Mantia F. What is the trigger for the hydrogen evolution reaction? - towards electrocatalysis beyond the Sabatier principle. Phys Chem Chem Phys 2020; 22:8768-8780. [PMID: 32285064 DOI: 10.1039/d0cp01108h] [Citation(s) in RCA: 28] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The mechanism of the hydrogen evolution reaction, although intensively studied for more than a century, remains a fundamental scientific challenge. Many important questions are still open, making it elusive to establish rational principles for electrocatalyst design. In this work, a comprehensive investigation was conducted to identify which dynamic phenomena at the electrified interface are prerequisite for the formation of molecular hydrogen. In fact, what we observe as an onset of the macroscopic faradaic current originates from dynamic structural changes in the double layer, which are entropic in nature. Based on careful analysis of the activation process, an electrocatalytic descriptor is introduced, evaluated and experimentally confirmed. The catalytic activity descriptor is named as the potential of minimum entropy. The experimentally verified catalytic descriptor reveals significant potential to yield innovative insights for the design of catalytically active materials and interfaces.
Collapse
Affiliation(s)
- Aleksandar R Zeradjanin
- Universität Bremen, Energiespeicher- und Energiewandlersysteme, Bibliothekstr. 1, 28359, Bremen, Germany. and Max-Planck-Institut für Eisenforschung GmbH, Department of Interface Chemistry and Surface Engineering, Max-Planck-Strasse 1, 40237 Düsseldorf, Germany. and Max Planck Institute for Chemical Energy Conversion, Stiftstrasse 34-36, 45470 Mülheim an der Ruhr, Germany.
| | - George Polymeros
- Max-Planck-Institut für Eisenforschung GmbH, Department of Interface Chemistry and Surface Engineering, Max-Planck-Strasse 1, 40237 Düsseldorf, Germany.
| | - Cigdem Toparli
- Laboratory for Electrochemical Interfaces, Departments of Nuclear Science and Engineering, and Materials Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139, USA
| | - Marc Ledendecker
- Max-Planck-Institut für Eisenforschung GmbH, Department of Interface Chemistry and Surface Engineering, Max-Planck-Strasse 1, 40237 Düsseldorf, Germany.
| | - Nejc Hodnik
- Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, Hajdrihova 19, 1000 Ljubljana, Slovenia
| | - Andreas Erbe
- Department of Materials Science and Engineering, NTNU, Norwegian University of Science and Technology, 7491 Trondheim, Norway
| | - Michael Rohwerder
- Max-Planck-Institut für Eisenforschung GmbH, Department of Interface Chemistry and Surface Engineering, Max-Planck-Strasse 1, 40237 Düsseldorf, Germany.
| | - Fabio La Mantia
- Universität Bremen, Energiespeicher- und Energiewandlersysteme, Bibliothekstr. 1, 28359, Bremen, Germany.
| |
Collapse
|
9
|
Bilotto P, Lengauer M, Andersson J, Ramach U, Mears LLE, Valtiner M. Interaction Profiles and Stability of Rigid and Polymer-Tethered Lipid Bilayer Models at Highly Charged and Highly Adhesive Contacts. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2019; 35:15552-15563. [PMID: 31475831 DOI: 10.1021/acs.langmuir.9b01942] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Understanding interaction force versus distance profiles of supported lipid bilayers (SLBs) is relevant to a number of areas, which rely on these model systems, including, e.g., characterization of ligand/receptor interactions or bacterial adhesion. Here, the stability of 4 different SLB architectures was compared using the surface forces apparatus (SFA) and atomic force microscopy (AFM). Specifically, the outer envelope of the bilayer systems remained constant as 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). The inner layer was varied between DPPC and 1,2-dipalmitoyl-3-trimethylammonium-propane (DPTAP) both on mica, and self-assembled monolayers (SAMs) of hexadecanethiol and the polymer-tethered diphytanylglycerol-tetraethylene glycol-lipoid acid (DPhyTL) on smooth gold surfaces. In that same order these gave an increasing strength of interaction between the inner layer and the supporting substrate and hence improved stability under highly adhesive conditions. Detachment profiles from highly charged and highly adhesive contacts were characterized, and approach characteristics were fitted to DLVO models. We find increasing stability under highly adhesive loads, approaching the hydrophobic limit of the adhesive energy between the inner and outer layers for the SAM-based systems. For all four SLBs we further compare AFM surface topographies, which strongly depend on preparation conditions, and the DLVO fitting of the SFA approach curves finds a strong charge regulation behavior during interaction, dependent on the particular model system. In addition, we find undulation characteristics during approach and separation. The increased stability of the complex architectures on a gold support makes these model systems an ideal starting point for studying more complex strongly adhesive/interacting systems, including, for example, ligand/receptor interactions, biosensing interactions, or cell/surface interactions.
Collapse
Affiliation(s)
- Pierluigi Bilotto
- Institute of Applied Physics , Vienna University of Technology , Vienna 1040 , Austria
| | - Maximilian Lengauer
- Institute of Applied Physics , Vienna University of Technology , Vienna 1040 , Austria
| | | | - Ulrich Ramach
- Institute of Applied Physics , Vienna University of Technology , Vienna 1040 , Austria
- CEST Kompetenzzentrum für elektrochemische Oberflächentechnologie , Wiener Neustadt 2700 , Austria
| | - Laura L E Mears
- Institute of Applied Physics , Vienna University of Technology , Vienna 1040 , Austria
| | - Markus Valtiner
- Institute of Applied Physics , Vienna University of Technology , Vienna 1040 , Austria
| |
Collapse
|
10
|
Dobbs HA, Degen GD, Berkson ZJ, Kristiansen K, Schrader AM, Oey T, Sant G, Chmelka BF, Israelachvili JN. Electrochemically Enhanced Dissolution of Silica and Alumina in Alkaline Environments. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2019; 35:15651-15660. [PMID: 31454249 DOI: 10.1021/acs.langmuir.9b02043] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Dissolution of mineral surfaces at asymmetric solid-liquid-solid interfaces in aqueous solutions occurs in technologically relevant processes, such as chemical/mechanical polishing (CMP) for semiconductor fabrication, formation and corrosion of structural materials, and crystallization of materials relevant to heterogeneous catalysis or drug delivery. In some such processes, materials at confined interfaces exhibit dissolution rates that are orders of magnitude larger than dissolution rates of isolated surfaces. Here, the dissolution of silica and alumina in close proximity to a charged gold surface or mica in alkaline solutions of pH 10-11 is shown to depend on the difference in electrostatic potentials of the surfaces, as determined from measurements conducted using a custom-built electrochemical pressure cell and a surface forces apparatus (SFA). The enhanced dissolution is proposed to result from overlap of the electrostatic double layers between the dissimilar charged surfaces at small intersurface separation distances (<1 Debye length). A semiquantitative model shows that overlap of the electric double layers can change the magnitude and direction of the electric field at the surface with the less negative potential, which results in an increase in the rate of dissolution of that surface. When the surface electrochemical properties were changed, the dissolution rates of silica and alumina were increased by up to 2 orders of magnitude over the dissolution rates of isolated compositionally similar surfaces under otherwise identical conditions. The results provide new insights on dissolution processes that occur at solid-liquid-solid interfaces and yield design criteria for controlling dissolution through electrochemical modification, with relevance to diverse technologies.
Collapse
|
11
|
McNamee CE. Effect of a liquid flow on the forces between charged solid surfaces and the non-equilibrium electric double layer. Adv Colloid Interface Sci 2019; 266:21-33. [PMID: 30831437 DOI: 10.1016/j.cis.2019.02.001] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/11/2018] [Revised: 02/19/2019] [Accepted: 02/20/2019] [Indexed: 01/05/2023]
Abstract
The physical properties of fluids can change as they flow through confined charged solid areas, such as a charged pore or channel, allowing the transport of fluid through the channels to be controlled. The liquid flow is influenced by the electrical double layer (EDL) that is next to the charged surface. The overlap of the EDL of two nearby charged solid surfaces results in the formation of an electrostatic force. A flow will change the EDL from an equilibrium state to a non-equilibrium state, causing the forces to also change from an equilibrium (static) state to a non-equilibrium (dynamic) state. There are numerous studies that have been performed by molecular dynamics (MD) simulations and surface force experiments which concern the equilibrium EDL and the equilibrium surface forces. However, there are significantly less studies concerning the non-equilibrium EDL and non-equilibrium surface forces, including the effect of a liquid flow on the EDL and the surface forces. This review will focus on how a liquid flow changes the EDL and the surface forces of charged hydrophilic solid surfaces in aqueous electrolyte solutions. Results obtained by MD simulations and surface force experiments are discussed in this review. A flow was seen to be able to distort the EDL, causing the surface forces to change. The EDL and surface forces were affected by the surface charge, the structuring ability of the liquid molecules and ions near the surfaces, the ion type and their specificity towards the surface, the ionic concentration, and the rate of flow of the liquid. The physical properties of the system were shown to change with a flow, e.g. the increase in the fluid viscosity next to a charged solid surface that accompanies a flow. The number of counterions adsorbed to a charged solid surface was also seen to affect the direction of flow in an EDL. The surface forces were shown to change with a flow due to changes in hydrodynamic and electrostatic forces. Information on the effect of the liquid flow on the EDL and surface forces will help improve applications that require fluid to be transported in a defined way through a charged solid vessel.
Collapse
|
12
|
|
13
|
Borghi F, Scaparra B, Paternoster C, Milani P, Podestà A. Electrostatic Double-Layer Interaction at the Surface of Rough Cluster-Assembled Films: The Case of Nanostructured Zirconia. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2018; 34:10230-10242. [PMID: 30074804 DOI: 10.1021/acs.langmuir.8b01387] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Here, we investigated the influence of the nanoscale surface morphology on the electrostatic double layer at corrugated surfaces in aqueous electrolytes. For this purpose, we have produced cluster-assembled nanostructured zirconium dioxide (ns-ZrO x, x ≈ 2) films with controlled morphological properties by supersonic cluster beam deposition (SCBD) and measured the double-layer interaction by atomic force microscopy with colloidal probes. SCBD allowed tuning the characteristic widths of the corrugated interface (root-mean-square roughness, correlation length) across a wide range of values, matching the width of the electrostatic double layer (Debye length) and the typical size of nanocolloids (proteins, enzymes, and catalytic nanoparticles). To accurately characterize the surface charge density in the high-roughness regime, we have developed a two-exponential model of the electrostatic force that explicitly includes roughness and better accounts for the roughness-induced amplification of the interaction. We were then able to observe a marked reduction of the isoelectric point of ns-ZrO x surfaces of increasing roughness. This result is in good agreement with our previous observations on cluster-assembled nanostructured titania films and demonstrates that the phenomenon is not limited to a specific material, but more generally depends on peculiar nanoscale morphological effects, related to the competition of the characteristic lengths of the system.
Collapse
Affiliation(s)
- Francesca Borghi
- CIMaINa and Dipartimento di Fisica "Aldo Pontremoli" , Università degli Studi di Milano , via Celoria 16 , 20133 Milano , Italy
| | - Bianca Scaparra
- CIMaINa and Dipartimento di Fisica "Aldo Pontremoli" , Università degli Studi di Milano , via Celoria 16 , 20133 Milano , Italy
| | - Costanza Paternoster
- CIMaINa and Dipartimento di Fisica "Aldo Pontremoli" , Università degli Studi di Milano , via Celoria 16 , 20133 Milano , Italy
| | - Paolo Milani
- CIMaINa and Dipartimento di Fisica "Aldo Pontremoli" , Università degli Studi di Milano , via Celoria 16 , 20133 Milano , Italy
| | - Alessandro Podestà
- CIMaINa and Dipartimento di Fisica "Aldo Pontremoli" , Università degli Studi di Milano , via Celoria 16 , 20133 Milano , Italy
| |
Collapse
|
14
|
Adhesive forces between two cleaved calcite surfaces in NaCl solutions: The importance of ionic strength and normal loading. J Colloid Interface Sci 2018; 532:605-613. [PMID: 30114650 DOI: 10.1016/j.jcis.2018.08.027] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2017] [Revised: 07/31/2018] [Accepted: 08/09/2018] [Indexed: 02/02/2023]
Abstract
The mechanical strength of calcite bearing rocks is influenced by pore fluid chemistry due to the variation in nano-scale surface forces acting at the grain contacts or close to the fracture tips. The adhesion of two contacting surfaces, which affects the macroscopic strength of the material, is not only influenced by the fluid chemistry but also by the surface topography. In this paper, we use Atomic Force Microscope (AFM) to measure the interfacial forces between two freshly cleaved calcite surfaces in CaCO3-saturated solutions with varying NaCl concentration. We show that calcite contacts become stronger with increasing NaCl concentration (>100 mM), as a result of progressively weaker secondary hydration and increasing attraction due to instantaneous ion-ion correlation. Moreover, we discuss the effect of normal applied force (Fn) and surface roughness on the measured adhesion forces (Fad). We show that the measured pull-off force (adhesion) is linearly correlated with the magnitude of Fn, where an increase in applied force results in increased adhesion. This is attributed to a larger number of contacting surface asperities and thus increase in real contact area and the contact-bond strength. We discuss that the possible variation in local topography at contacts, together with strong dependence on ionic strength of the solution, can explain the inconsistent behavior of calcite rocks in NaCl solutions.
Collapse
|
15
|
Cheng HW, Weiss H, Stock P, Chen YJ, Reinecke CR, Dienemann JN, Mezger M, Valtiner M. Effect of Concentration on the Interfacial and Bulk Structure of Ionic Liquids in Aqueous Solution. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2018; 34:2637-2646. [PMID: 29356544 DOI: 10.1021/acs.langmuir.7b03757] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Bio and aqueous applications of ionic liquids (IL) such as catalysis in micelles formed in aqueous IL solutions or extraction of chemicals from biologic materials rely on surface-active and self-assembly properties of ILs. Here, we discuss qualitative relations of the interfacial and bulk structuring of a water-soluble surface-active IL ([C8MIm][Cl]) on chemically controlled surfaces over a wide range of water concentrations using both force probe and X-ray scattering experiments. Our data indicate that IL structuring evolves from surfactant-like surface adsorption at low IL concentrations, to micellar bulk structure adsorption above the critical micelle concentration, to planar bilayer formation in ILs with <1 wt % of water and at high charging of the surface. Interfacial structuring is controlled by mesoscopic bulk structuring at high water concentrations. Surface chemistry and surface charges decisively steer interfacial ordering of ions if the water concentration is low and/or the surface charge is high. We also demonstrate that controlling the interfacial forces by using self-assembled monolayer chemistry allows tuning of interfacial structures. Both the ratio of the head group size to the hydrophobic tail volume as well as the surface charging trigger the bulk structure and offer a tool for predicting interfacial structures. Based on the applied techniques and analyses, a qualitative prediction of molecular layering of ILs in aqueous systems is possible.
Collapse
Affiliation(s)
- H-W Cheng
- Department for Interface Chemistry and Surface Engineering, Max Planck Institut für Eisenforschung GmbH , 40237 Düsseldorf, Germany
- Institute of Applied Physics, Vienna University of Technology , A-1040 Vienna, Austria
| | - H Weiss
- Max Planck Institute for Polymer Research , 55128 Mainz, Germany
| | - P Stock
- Department for Interface Chemistry and Surface Engineering, Max Planck Institut für Eisenforschung GmbH , 40237 Düsseldorf, Germany
| | - Y-J Chen
- Department for Interface Chemistry and Surface Engineering, Max Planck Institut für Eisenforschung GmbH , 40237 Düsseldorf, Germany
| | - C R Reinecke
- Department for Interface Chemistry and Surface Engineering, Max Planck Institut für Eisenforschung GmbH , 40237 Düsseldorf, Germany
| | - J-N Dienemann
- Department for Interface Chemistry and Surface Engineering, Max Planck Institut für Eisenforschung GmbH , 40237 Düsseldorf, Germany
| | - M Mezger
- Max Planck Institute for Polymer Research , 55128 Mainz, Germany
- Institute of Physics, Johannes Gutenberg University Mainz , 55128 Mainz, Germany
| | - M Valtiner
- Department for Interface Chemistry and Surface Engineering, Max Planck Institut für Eisenforschung GmbH , 40237 Düsseldorf, Germany
- Institute of Applied Physics, Vienna University of Technology , A-1040 Vienna, Austria
| |
Collapse
|
16
|
Xie L, Shi C, Cui X, Huang J, Wang J, Liu Q, Zeng H. Probing the Interaction Mechanism between Air Bubbles and Bitumen Surfaces in Aqueous Media Using Bubble Probe Atomic Force Microscopy. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2018; 34:729-738. [PMID: 29045156 DOI: 10.1021/acs.langmuir.7b02693] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Surface interactions involving deformable air bubbles have attracted tremendous interest in a wide range of engineering applications, such as mineral flotation and bitumen extraction. In this work, for the first time, the interaction forces between air bubbles and bitumen surfaces in complex aqueous media of varying pH, salinity, and salts were directly measured using a bubble probe atomic force microscope (AFM) technique. The AFM topographic imaging reveals that bitumen surface tends to be rougher and form distinct domains at high NaCl concentration or under strongly alkaline environment. The force measurements demonstrate the critical role of ionic strength and solution pH in bubble-bitumen interaction and attachment, which could be well described by a theoretical model based on Reynolds lubrication theory and augmented Young-Laplace equation by including the effect of disjoining pressure. In 1 mM NaCl, the electrical double layer (EDL) repulsion inhibited bubble-bitumen attachment, and such a repulsive effect could be further strengthened with increasing solution pH. In 500 mM NaCl, the hydrophobic attraction could lead to bubble-bitumen attachment, while a high solution pH could weaken the hydrophobic interaction. The addition of calcium ion in 500 mM NaCl could enhance the hydrophobic interaction and facilitate the bubble-bitumen attachment, most likely attributed to the bridging effect between calcium ions and the functional groups (e.g., carboxyl group) of interface-active molecules on bitumen surfaces, thus leading to higher surface roughness and hydrophobic moieties/aggregates on bitumen as confirmed by AFM imaging. Our results provide quantitative information on the interaction mechanism between air bubbles and bitumen surfaces in complex aqueous solutions at the nanoscale, which has useful implications to many related interfacial interactions in industrial processes such as oil production, oil-water separation, and wastewater treatment.
Collapse
Affiliation(s)
- Lei Xie
- Department of Chemical and Materials Engineering, University of Alberta , Edmonton, Alberta, T6G 1H9, Canada
| | - Chen Shi
- Department of Chemical and Materials Engineering, University of Alberta , Edmonton, Alberta, T6G 1H9, Canada
| | - Xin Cui
- Department of Chemical and Materials Engineering, University of Alberta , Edmonton, Alberta, T6G 1H9, Canada
| | - Jun Huang
- Department of Chemical and Materials Engineering, University of Alberta , Edmonton, Alberta, T6G 1H9, Canada
| | - Jingyi Wang
- Department of Chemical and Materials Engineering, University of Alberta , Edmonton, Alberta, T6G 1H9, Canada
| | - Qi Liu
- Department of Chemical and Materials Engineering, University of Alberta , Edmonton, Alberta, T6G 1H9, Canada
| | - Hongbo Zeng
- Department of Chemical and Materials Engineering, University of Alberta , Edmonton, Alberta, T6G 1H9, Canada
| |
Collapse
|
17
|
Hu Q, Weber C, Cheng HW, Renner FU, Valtiner M. Anion Layering and Steric Hydration Repulsion on Positively Charged Surfaces in Aqueous Electrolytes. Chemphyschem 2017; 18:3056-3065. [PMID: 28872763 DOI: 10.1002/cphc.201700865] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2017] [Revised: 08/29/2017] [Indexed: 11/10/2022]
Abstract
The molecular structure at charged solid/liquid interfaces is vital for many chemical or electrochemical processes, such as adhesion, catalysis, or the stability of colloidal dispersions. How cations influence structural hydration forces and interactions across negatively charged surfaces has been studied in great detail. However, how anions influence structural hydration forces on positively charged surfaces is much less understood. Herein we report force versus distance profiles on freshly cleaved mica using atomic force microscopy with silicon tips. We characterize steric anion hydration forces for a set of common anions (Cl- , ClO4- , NO3- , SO42- and PO43- ) in pure acids at pH ≈1, where protons are the co-ions. Solutions containing anions with low hydration energies exhibit repulsive structural hydration forces, indicating significant ion and/or water structuring within the first 1-2 nm on a positively charged surface. We attribute this to specific adsorption effects within the Stern layer. In contrast, ions with high hydration energies show exponentially repulsive hydration forces, indicating a lower degree of structuring within the Stern layer. The presented data demonstrates that anion hydration forces in the inner double layer are comparable to cation hydration forces, and that they qualitatively correlate with hydration free energies. This work contributes to understanding interaction processes in which positive charge is screened by anions within an electrolyte.
Collapse
Affiliation(s)
- Qingyun Hu
- Department for Interface Chemistry and Surface Engineering, Max Planck Institut für Eisenforschung GmbH, D-40237, Düsseldorf, Germany
| | - Christian Weber
- Institut für Physikalische Chemie der TU Bergakademie Freiberg, 09599, Freiberg, Germany
| | - Hsiu-Wei Cheng
- Department for Interface Chemistry and Surface Engineering, Max Planck Institut für Eisenforschung GmbH, D-40237, Düsseldorf, Germany.,Institut für Physikalische Chemie der TU Bergakademie Freiberg, 09599, Freiberg, Germany
| | - Frank Uwe Renner
- Institute of Materials Research (IMO), Hasselt University, Wetenschapspark 1, B-3590, Diepenbeek, Belgium
| | - Markus Valtiner
- Department for Interface Chemistry and Surface Engineering, Max Planck Institut für Eisenforschung GmbH, D-40237, Düsseldorf, Germany.,Institut für Physikalische Chemie der TU Bergakademie Freiberg, 09599, Freiberg, Germany
| |
Collapse
|
18
|
|
19
|
Tivony R, Klein J. Modifying surface forces through control of surface potentials. Faraday Discuss 2017; 199:261-277. [PMID: 28436529 DOI: 10.1039/c6fd00255b] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Combining direct surface force measurements with in situ regulation of surface potential provides an exceptional opportunity for investigating and manipulating interfacial phenomena. Recently, we studied the interaction between gold and mica surfaces in water with no added salt, while controlling the metal potential, and found that the surface charge at the metal may vary, and possibly even change its sign, as it progressively approaches the (constant-charge) mica surface [Langmuir, 2015, 31(47), 12845-12849]. Such a variation was found to directly affect the nature of the contact and adhesion between them due to exclusion of all mobile counterions from the intersurface gap. In this work, we extend this to examine the potential-dependent response of the adhesion and interaction between gold and mica to externally applied voltages and in electrolyte solution. Using a surface force balance (SFB) combined with a three-electrode electrochemical cell, we measured the normal interaction between gold and mica under surface potential regulation, revealing three interaction regimes - pure attraction, non-monotonic interaction from electrostatic repulsion to attraction (owing to charge inversion) and pure repulsion. Accordingly, the adhesion energy between the surfaces was found to vary both in no added salt water and, more strongly, in electrolyte solution. We justify this potential-dependent variation of adhesion energy in terms of the interplay between electrostatic energy and van der Waals (vdW) interaction at contact, and attribute the difference between the two cases to the weaker vdW interaction in electrolyte solution. Finally, we showed that through abruptly altering the gold surface potential from negative to positive and vice versa, the adhesion between gold and mica can be reversibly switched on and off. We surmise that the process of bringing the surface into contact is associated with the formation of a strong electric field O (108 V m-1) in the intersurface gap.
Collapse
Affiliation(s)
- Ran Tivony
- Department of Materials and Interfaces, Weizmann Institute of Science, Rehovot, 76100, Israel.
| | - Jacob Klein
- Department of Materials and Interfaces, Weizmann Institute of Science, Rehovot, 76100, Israel.
| |
Collapse
|
20
|
Stock P, Monroe JI, Utzig T, Smith DJ, Shell MS, Valtiner M. Unraveling Hydrophobic Interactions at the Molecular Scale Using Force Spectroscopy and Molecular Dynamics Simulations. ACS NANO 2017; 11:2586-2597. [PMID: 28267918 DOI: 10.1021/acsnano.6b06360] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Interactions between hydrophobic moieties steer ubiquitous processes in aqueous media, including the self-organization of biologic matter. Recent decades have seen tremendous progress in understanding these for macroscopic hydrophobic interfaces. Yet, it is still a challenge to experimentally measure hydrophobic interactions (HIs) at the single-molecule scale and thus to compare with theory. Here, we present a combined experimental-simulation approach to directly measure and quantify the sequence dependence and additivity of HIs in peptide systems at the single-molecule scale. We combine dynamic single-molecule force spectroscopy on model peptides with fully atomistic, both equilibrium and nonequilibrium, molecular dynamics (MD) simulations of the same systems. Specifically, we mutate a flexible (GS)5 peptide scaffold with increasing numbers of hydrophobic leucine monomers and measure the peptides' desorption from hydrophobic self-assembled monolayer surfaces. Based on the analysis of nonequilibrium work-trajectories, we measure an interaction free energy that scales linearly with 3.0-3.4 kBT per leucine. In good agreement, simulations indicate a similar trend with 2.1 kBT per leucine, while also providing a detailed molecular view into HIs. This approach potentially provides a roadmap for directly extracting qualitative and quantitative single-molecule interactions at solid/liquid interfaces in a wide range of fields, including interactions at biointerfaces and adhesive interactions in industrial applications.
Collapse
Affiliation(s)
- Philipp Stock
- Department for Interface Chemistry and Surface Engineering, Max-Planck-Institut für Eisenforschung GmbH , D-40237 Düsseldorf, Germany
| | - Jacob I Monroe
- Department of Chemical Engineering, University of California Santa Barbara , Santa Barbara, California 93106-5080, United States
| | - Thomas Utzig
- Department for Interface Chemistry and Surface Engineering, Max-Planck-Institut für Eisenforschung GmbH , D-40237 Düsseldorf, Germany
| | - David J Smith
- Department of Chemical Engineering, University of California Santa Barbara , Santa Barbara, California 93106-5080, United States
| | - M Scott Shell
- Department of Chemical Engineering, University of California Santa Barbara , Santa Barbara, California 93106-5080, United States
| | - Markus Valtiner
- Department for Interface Chemistry and Surface Engineering, Max-Planck-Institut für Eisenforschung GmbH , D-40237 Düsseldorf, Germany
- Department for Physical Chemistry, Technische Universität Bergakademie Freiberg , D-09599 Freiberg, Germany
| |
Collapse
|
21
|
Thormann E. Surface forces between rough and topographically structured interfaces. Curr Opin Colloid Interface Sci 2017. [DOI: 10.1016/j.cocis.2016.09.011] [Citation(s) in RCA: 29] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
22
|
|
23
|
Tivony R, Iuster N, Klein J. Probing the Surface Properties of Gold at Low Electrolyte Concentration. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2016; 32:7346-7355. [PMID: 27357375 DOI: 10.1021/acs.langmuir.6b01697] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Using the surface force balance (SFB), we studied the surface properties of gold in aqueous solution with low electrolyte concentration (∼10(-5) M and pH = 5.8), i.e., water with no added salt, by directly measuring the interaction between an ultrasmooth gold surface (ca. 0.2 nm rms roughness) and a mica surface. Under these conditions, specific adsorption of ions is minimized and its influence on the surface charge and surface potential of gold is markedly reduced. At open circuit potential, the electrostatic interaction between gold and mica was purely attractive and gold was found to be positively charged. This was further confirmed by force measurements against a positively charged surface, poly-l-lysine coated mica. Successive force measurements unambiguously showed that once gold and mica reach contact all counterions are expelled from the gap, confirming that at contact the surface charge of gold is equal and opposite in charge to that of mica. Further analysis of adhesion energy between the surfaces indicated that adhesion is mostly governed by vdW dispersion force and to a lesser extent by electrostatic interaction. Force measurements under external applied potentials showed that the gold-mica interaction can be regulated as a function of applied potential even at low electrolyte concentration. The gold-mica interaction was described very precisely by the nonlinearized Poisson-Boltzmann (PB) equation, where one of the surfaces is at constant charge, i.e., mica, and the other, i.e., gold, is at constant potential. Consequently, the gold surface potential could be determined accurately both at open circuit potential (OCP) and under different applied potentials. Using the obtained surface potentials, we were able to derive fundamental characteristics of the gold surface, e.g., its surface charge density and potential of zero charge (PZC), at very low electrolyte concentration.
Collapse
Affiliation(s)
- Ran Tivony
- Department of Materials and Interfaces, Weizmann Institute of Science , Rehovot, 76100, Israel
| | - Noa Iuster
- Department of Materials and Interfaces, Weizmann Institute of Science , Rehovot, 76100, Israel
| | - Jacob Klein
- Department of Materials and Interfaces, Weizmann Institute of Science , Rehovot, 76100, Israel
| |
Collapse
|
24
|
de Wijn AS, Fasolino A, Filippov AE, Urbakh M. Effects of molecule anchoring and dispersion on nanoscopic friction under electrochemical control. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2016; 28:105001. [PMID: 26871411 DOI: 10.1088/0953-8984/28/10/105001] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The application of electric fields is a promising strategy for in situ control of friction. While there have recently been many experimental studies on friction under the influence of electric fields, theoretical understanding is very limited. Recently, we introduced a simple theoretical model for friction under electrochemical conditions that focused on the interaction of a force microscope tip with adsorbed molecules whose orientation was dependent on the applied electric field. Here we focus on the effects of anchoring of the molecules on friction. We show that anchoring affects the intensity and width of the peak in the friction that occurs near a reorientation transition of adsorbed molecules, and explain this by comparing the strength of molecule-molecule and molecule-tip interactions. We derive a dispersion relation for phonons in the layer of adsorbed molecules and demonstrate that it can be used to understand important features of the frictional response.
Collapse
Affiliation(s)
- A S de Wijn
- Department of Physics, Stockholm University, 106 91 Stockholm, Sweden
| | | | | | | |
Collapse
|
25
|
|
26
|
Tivony R, Yaakov DB, Silbert G, Klein J. Direct Observation of Confinement-Induced Charge Inversion at a Metal Surface. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2015; 31:12845-12849. [PMID: 26561978 DOI: 10.1021/acs.langmuir.5b03326] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Surface interactions across water are central to areas from nanomedicine to colloidal stability. They are predominantly a combination of attractive but short-ranged dispersive (van der Waals) forces, and long-ranged electrostatic forces between the charged surfaces. Here we show, using a surface force balance, that electrostatic forces between two surfaces across water, one at constant charge while the other (a molecularly smooth metal surface) is at constant potential of the same sign, may revert smoothly from repulsion to attraction on progressive confinement of the aqueous intersurface gap. This remarkable effect, long predicted theoretically in the classic Gouy-Chapman (Poisson-Boltzmann) model but never previously experimentally observed, unambiguously demonstrates surface charge reversal at the metal-water surface. This experimental confirmation emphasizes the implications for interactions of dielectrics with metal surfaces in aqueous media.
Collapse
Affiliation(s)
- Ran Tivony
- Department of Materials and Interfaces, Weizmann Institute of Science , Rehovot 76100, Israel
| | - Dan Ben Yaakov
- Department of Materials and Interfaces, Weizmann Institute of Science , Rehovot 76100, Israel
| | - Gilad Silbert
- Department of Materials and Interfaces, Weizmann Institute of Science , Rehovot 76100, Israel
| | - Jacob Klein
- Department of Materials and Interfaces, Weizmann Institute of Science , Rehovot 76100, Israel
| |
Collapse
|
27
|
Direct and quantitative AFM measurements of the concentration and temperature dependence of the hydrophobic force law at nanoscopic contacts. J Colloid Interface Sci 2015; 446:244-51. [DOI: 10.1016/j.jcis.2015.01.032] [Citation(s) in RCA: 43] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/04/2014] [Revised: 01/15/2015] [Accepted: 01/15/2015] [Indexed: 12/30/2022]
|
28
|
Parsons DF, Walsh RB, Craig VSJ. Surface forces: surface roughness in theory and experiment. J Chem Phys 2015; 140:164701. [PMID: 24784293 DOI: 10.1063/1.4871412] [Citation(s) in RCA: 53] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/30/2022] Open
Abstract
A method of incorporating surface roughness into theoretical calculations of surface forces is presented. The model contains two chief elements. First, surface roughness is represented as a probability distribution of surface heights around an average surface height. A roughness-averaged force is determined by taking an average of the classic flat-surface force, weighing all possible separation distances against the probability distributions of surface heights. Second the model adds a repulsive contact force due to the elastic contact of asperities. We derive a simple analytic expression for the contact force. The general impact of roughness is to amplify the long range behaviour of noncontact (DLVO) forces. The impact of the elastic contact force is to provide a repulsive wall which is felt at a separation between surfaces that scales with the root-mean-square (RMS) roughness of the surfaces. The model therefore provides a means of distinguishing between "true zero," where the separation between the average centres of each surface is zero, and "apparent zero," defined by the onset of the repulsive contact wall. A normal distribution may be assumed for the surface probability distribution, characterised by the RMS roughness measured by atomic force microscopy (AFM). Alternatively the probability distribution may be defined by the histogram of heights measured by AFM. Both methods of treating surface roughness are compared against the classic smooth surface calculation and experimental AFM measurement.
Collapse
Affiliation(s)
- Drew F Parsons
- Department of Applied Mathematics, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200, Australia
| | - Rick B Walsh
- Department of Applied Mathematics, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200, Australia
| | - Vincent S J Craig
- Department of Applied Mathematics, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200, Australia
| |
Collapse
|
29
|
Svetovoy VB, Palasantzas G. Influence of surface roughness on dispersion forces. Adv Colloid Interface Sci 2015; 216:1-19. [PMID: 25481867 DOI: 10.1016/j.cis.2014.11.001] [Citation(s) in RCA: 45] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2014] [Revised: 11/04/2014] [Accepted: 11/06/2014] [Indexed: 11/16/2022]
Abstract
Surface roughness occurs in a wide variety of processes where it is both difficult to avoid and control. When two bodies are separated by a small distance the roughness starts to play an important role in the interaction between the bodies, their adhesion, and friction. Control of this short-distance interaction is crucial for micro and nanoelectromechanical devices, microfluidics, and for micro and nanotechnology. An important short-distance interaction is the dispersion forces, which are omnipresent due to their quantum origin. These forces between flat bodies can be described by the Lifshitz theory that takes into account the actual optical properties of interacting materials. However, this theory cannot describe rough bodies. The problem is complicated by the nonadditivity of the dispersion forces. Evaluation of the roughness effect becomes extremely difficult when roughness is comparable with the distance between bodies. In this paper we review the current state of the problem. Introduction for non-experts to physical origin of the dispersion forces is given in the paper. Critical experiments demonstrating the nonadditivity of the forces and strong influence of roughness on the interaction between bodies are reviewed. We also describe existing theoretical approaches to the problem. Recent advances in understanding the role of high asperities on the forces at distances close to contact are emphasized. Finally, some opinions about currently unsolved problems are also presented.
Collapse
Affiliation(s)
- V B Svetovoy
- MESA(+) Institute for Nanotechnology, University of Twente, PO 217, 7500 AE Enschede, The Netherlands.
| | - G Palasantzas
- Zernike Institute for Advanced Materials, University of Groningen, 9747 AG Groningen, The Netherlands
| |
Collapse
|
30
|
Shrestha BR, Baimpos T, Raman S, Valtiner M. Angstrom-resolved real-time dissection of electrochemically active noble metal interfaces. ACS NANO 2014; 8:5979-5987. [PMID: 24826945 DOI: 10.1021/nn501127n] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Electrochemical solid|liquid interfaces are critically important for technological applications and materials for energy storage, harvesting, and conversion. Yet, a real-time Angstrom-resolved visualization of dynamic processes at electrified solid|liquid interfaces has not been feasible. Here we report a unique real-time atomistic view into dynamic processes at electrochemically active metal interfaces using white light interferometry in an electrochemical surface forces apparatus. This method allows simultaneous deciphering of both sides of an electrochemical interface-the solution and the metal side-with microsecond resolution under dynamically evolving reactive conditions that are inherent to technological systems in operando. Quantitative in situ analysis of the potentiodynamic electrochemical oxidation/reduction of noble metal surfaces shows that Angstrom thick oxides formed on Au and Pt are high-ik materials; that is, they are metallic or highly defect-rich semiconductors, while Pd forms a low-ik oxide. In contrast, under potentiostatic growth conditions, all noble metal oxides exhibit a low-ik behavior. On the solution side, we reveal hitherto unknown strong electrochemical reaction forces, which are due to temporary charge imbalance in the electric double layer caused by depletion/generation of charged species. The real-time capability of our approach reveals significant time lags between electron transfer, oxide reduction/oxidation, and solution side reaction during a progressing electrode process. Comparing the kinetics of solution and metal side responses provides evidence that noble metal oxide reduction proceeds via a hydrogen adsorption and subsequent dissolution/redeposition mechanism. The presented approach may have important implications for designing emerging materials utilizing electrified interfaces and may apply to bioelectrochemical processes and signal transmission.
Collapse
Affiliation(s)
- Buddha R Shrestha
- Department for Interface Chemistry and Surface Engineering, Max-Planck-Institut für Eisenforschung GmbH , Max-Planck-Straße 1, D-40237 Düsseldorf, Germany
| | | | | | | |
Collapse
|
31
|
|
32
|
Baimpos T, Shrestha BR, Raman S, Valtiner M. Effect of interfacial ion structuring on range and magnitude of electric double layer, hydration, and adhesive interactions between mica surfaces in 0.05-3 M Li⁺ and Cs⁺ electrolyte solutions. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2014; 30:4322-32. [PMID: 24655312 DOI: 10.1021/la500288w] [Citation(s) in RCA: 31] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/22/2023]
Abstract
Ions and water structuring at charged-solid/electrolyte interfaces and forces arising from interfacial structuring in solutions above 100 mM concentrations dominate structure and functionality in many physiological, geological, and technological systems. In these concentrations, electrolyte structuring occurs within the range of molecular dimensions. Here, we quantitatively measure and describe electric double layer (EDL) and adhesive interactions at mica-interfaces in aqueous CsCl and LiCl solutions with concentrations ranging from 50 mM to 3 M. Complementarily, using atomic force microscopy and surface forces apparatus experiments we characterize concentration-dependent stark differences in the inner and outer EDL force profiles, and discuss differences between the used methods. From 50 mM to 1 M concentrations, interactions forces measured in CsCl-solutions exhibit strong hydration repulsions, but no diffuse EDL-repulsions beyond the Stern layer. In confinement the weakly hydrated Cs(+) ions condensate into the mica-lattice screening the entire surface charge within the Stern layer. In contrast, strongly hydrated Li(+) ions only partially compensate the surface charge within the Stern layer, leading to the formation of a diffuse outer double layer with DLVO behavior. Both LiCl and CsCl solutions exhibit oscillatory ion-hydration forces at surface separations from 2.2 nm to 4-8 Å. Below 4-8 Å the force profiles are dominated in both cases by forces originating from water and/or ion confinement at the solid/electrolyte/solid interface. Adhesive minima and their location vary strongly with the electrolyte and its concentration due to specific ion correlations across the interface, while dispersion forces between the surfaces are overpowered. Highly concentrated 3 M solutions exhibit solidification of the inner EDL structure and an unexpected formation of additional diffuse EDL forces with an increasing range, as recently measured in ionic liquids. Our results may have important implications for understanding and modeling of interaction forces present in static and dynamic systems under physiological and high salt conditions.
Collapse
Affiliation(s)
- Theodoros Baimpos
- Department of Interface Chemistry and Surface Engineering, Max-Planck Institut für Eisenforschung GmbH , Max-Planck-Straße 1, D-40237, Düsseldorf, Germany
| | | | | | | |
Collapse
|
33
|
Gupta R, Fréchette J. Interferometry of surfaces with well-defined topography in the surface force apparatus. J Colloid Interface Sci 2013; 412:82-8. [DOI: 10.1016/j.jcis.2013.09.008] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/16/2013] [Revised: 09/02/2013] [Accepted: 09/04/2013] [Indexed: 01/18/2023]
|
34
|
Israelachvili JN, Kristiansen K, Gebbie MA, Lee DW, Donaldson SH, Das S, Rapp MV, Banquy X, Valtiner M, Yu J. The Intersection of Interfacial Forces and Electrochemical Reactions. J Phys Chem B 2013; 117:16369-87. [DOI: 10.1021/jp408144g] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Affiliation(s)
- Jacob N. Israelachvili
- Department
of Chemical Engineering, University of California at Santa Barbara, Santa Barbara, California 93106, United States
- Materials
Department, University of California at Santa Barbara, Santa Barbara, California 93106, United States
| | - Kai Kristiansen
- Department
of Chemical Engineering, University of California at Santa Barbara, Santa Barbara, California 93106, United States
| | - Matthew A. Gebbie
- Materials
Department, University of California at Santa Barbara, Santa Barbara, California 93106, United States
| | - Dong Woog Lee
- Department
of Chemical Engineering, University of California at Santa Barbara, Santa Barbara, California 93106, United States
| | - Stephen H. Donaldson
- Department
of Chemical Engineering, University of California at Santa Barbara, Santa Barbara, California 93106, United States
| | - Saurabh Das
- Department
of Chemical Engineering, University of California at Santa Barbara, Santa Barbara, California 93106, United States
| | - Michael V. Rapp
- Department
of Chemical Engineering, University of California at Santa Barbara, Santa Barbara, California 93106, United States
| | - Xavier Banquy
- Faculty
of Pharmacy, Universite de Montreal, Succursale Centre Ville Montreal, Quebec H3C 3J7, Canada
| | - Markus Valtiner
- Interface
Chemistry and Surface Engineering, Max-Planck-Institut für Eisenforschung GmbH, 40237 Düsseldorf, Germany
| | - Jing Yu
- NanoSystems
Biology Cancer Center and Kavli Nanoscience Institute, Division of
Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125, United States
| |
Collapse
|
35
|
Orozco-Alcaraz R, Kuhl TL. Interaction forces between DPPC bilayers on glass. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:337-43. [PMID: 23199333 PMCID: PMC3576029 DOI: 10.1021/la3039329] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
The surface force apparatus (SFA) was utilized to obtain force-distance profiles between silica-supported membranes formed by Langmuir-Blodgett deposition of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). In the absence of a membrane, a long-range electrostatic repulsion and short-range steric repulsion are measured as a result of the deprotonation of silica in water and the roughness of the silica film. The electrostatic repulsion is partially screened by the lipid membrane, and a van der Waals adhesion comparable to that measured with well-packed DPPC membranes on mica is measured. This finding suggest that electrostatic interactions due to the underlying negatively charged silica are likely present in other systems of glass-supported membranes. In contrast, the charge of an underlying mica substrate is almost completely screened when a lipid membrane is deposited on the mica. The difference in the two systems is attributed to the stronger physisorption of zwitterionic lipids to molecularly smooth mica compared to physisorption to rougher silica.
Collapse
Affiliation(s)
- Raquel Orozco-Alcaraz
- University of California Davis. Department of Chemical Engineering and Materials Science, One Shields Avenue, Davis CA 95616
| | - Tonya L. Kuhl
- University of California Davis. Department of Chemical Engineering and Materials Science, One Shields Avenue, Davis CA 95616
| |
Collapse
|
36
|
Kuznetsov V, Papastavrou G. Adhesion of colloidal particles on modified electrodes. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:16567-16579. [PMID: 23072548 DOI: 10.1021/la3029726] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
The adhesion between colloidal silica particles and modified electrodes has been studied by direct force measurements with the colloidal probe technique based on the atomic force microscope (AFM). The combination of potentiostatic control of gold electrodes and chemical modification of their surface with self-assembled monolayers (SAMs) allows for the decoupling of forces due to the electrical double layers and functional groups at the solid/liquid interface. Adhesion on such electrodes can be tuned over a large range using the externally applied potential and the aqueous solution's ionic strength. By utilizing cantilevers with a high force constant, it is possible to separate the various contributions to adhesion in an unambiguous manner. These contributions comprise diffuse-layer overlap, van der Waals forces, solvent exclusion, and electrocapillarity. A quantitative description of the observed adhesion forces is obtained by taking into account the surface roughness of the silica particle. The main component of the adhesion forces originates from the overlap of the electrical double layers, which is tuned by the external potential. By contrast, effects due to electrocapillarity are of only minor importance. Based on our quantitative analysis, a new approach is proposed that allows tuning of the adhesion force as a function of the externally applied potential. We expect this approach to have important applications for the design of microelectromechanical systems (MEMS), the development of electrochemical sensors, and the application of micro- and nanomanipulation.
Collapse
Affiliation(s)
- Volodymyr Kuznetsov
- Physical Chemistry II, University of Bayreuth, Universitätsstrasse, 95440 Bayreuth, Germany
| | | |
Collapse
|
37
|
Valtiner M, Banquy X, Kristiansen K, Greene GW, Israelachvili JN. The electrochemical surface forces apparatus: the effect of surface roughness, electrostatic surface potentials, and anodic oxide growth on interaction forces, and friction between dissimilar surfaces in aqueous solutions. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:13080-13093. [PMID: 22877582 DOI: 10.1021/la3018216] [Citation(s) in RCA: 39] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
We present a newly designed electrochemical surface forces apparatus (EC-SFA) that allows control and measurement of surface potentials and interfacial electrochemical reactions with simultaneous measurement of normal interaction forces (with nN resolution), friction forces (with μN resolution), and distances (with Å resolution) between apposing surfaces. We describe three applications of the developed EC-SFA and discuss the wide-range of potential other applications. In particular, we describe measurements of (1) force-distance profiles between smooth and rough gold surfaces and apposing self-assembled monolayer-covered smooth mica surfaces; (2) the effective changing thickness of anodically growing oxide layers with Å-accuracy on rough and smooth surfaces; and (3) friction forces evolving at a metal-ceramic contact, all as a function of the applied electrochemical potential. Interaction forces between atomically smooth surfaces are well-described using DLVO theory and the Hogg-Healy-Fuerstenau approximation for electric double layer interactions between dissimilar surfaces, which unintuitively predicts the possibility of attractive double layer forces between dissimilar surfaces whose surface potentials have similar sign, and repulsive forces between surfaces whose surface potentials have opposite sign. Surface roughness of the gold electrodes leads to an additional exponentially repulsive force in the force-distance profiles that is qualitatively well described by an extended DLVO model that includes repulsive hydration and steric forces. Comparing the measured thickness of the anodic gold oxide layer and the charge consumed for generating this layer allowed the identification of its chemical structure as a hydrated Au(OH)(3) phase formed at the gold surface at high positive potentials. The EC-SFA allows, for the first time, one to look at complex long-term transient effects of dynamic processes (e.g., relaxation times), which are also reflected in friction forces while tuning electrochemical surface potentials.
Collapse
Affiliation(s)
- Markus Valtiner
- Department of Chemical Engineering, University of California, Santa Barbara, California 93106-5080, United States
| | | | | | | | | |
Collapse
|
38
|
Valtiner M, Donaldson SH, Gebbie MA, Israelachvili JN. Hydrophobic forces, electrostatic steering, and acid-base bridging between atomically smooth self-assembled monolayers and end-functionalized PEGolated lipid bilayers. J Am Chem Soc 2012; 134:1746-53. [PMID: 22176530 DOI: 10.1021/ja209653n] [Citation(s) in RCA: 40] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Abstract
A molecular level understanding of interaction forces and dynamics between asymmetric apposing surfaces (including end-functionalized polymers) in water plays a key role in the utilization of molecular structures for smart and functional surfaces in biological, medical, and materials applications. To quantify interaction forces and binding dynamics between asymmetric apposing surfaces in terms of their chemical structure and molecular design we developed a novel surface forces apparatus experiment, using self-assembled monolayers (SAMs) on atomically smooth gold substrates. Varying the SAM head group functionality allowed us to quantitatively identify, rationalize, and therefore control which interaction forces dominated between the SAM surfaces and a surface coated with short-chain, amine end-functionalized polyethylene glycol (PEG) polymers extending from a lipid bilayer. Three different SAM-terminations were chosen for this study: (a) carboxylic acid, (b) alcohol, and (c) methyl head group terminations. These three functionalities allowed for the quantification of (a) specific acid-base bindings, (b) steric effects of PEG chains, and (c) adhesion of hydrophobic segments of the polymer backbone, all as a function of the solution pH. The pH-dependent acid-base binding appears to be a specific and charge mediated hydrogen bonding interaction between oppositely charged carboxylic acid and amine functionalities, at pH values above the acid pK(A) and below the amine pK(A). The long-range electrostatic "steering" of acid and base pairs leads to remarkably rapid binding formation and high binding probability of this specific binding even at distances close to full extension of the PEG tethers, a result which has potentially important implications for protein folding processes and enzymatic catalysis.
Collapse
Affiliation(s)
- Markus Valtiner
- Department of Chemical Engineering, University of California Santa Barbara (UCSB), Santa Barbara, California 93106-5080, USA
| | | | | | | |
Collapse
|