Layer-by-layer assembly through weak interactions and their biomedical applications

Polyelectrolyte nanofilms on cell surface can induce brown adipogenic differentiation of DFATs

Obesity and its related health issues significantly burden public health systems. Brown adipose tissue holds promise for addressing metabolic disorders and balancing the body's energy, making it a key research focus. Stimulating brown adipogenesis from stem cells could advance regenerative medicine and healthcare. In our previous research, we discovered that poly-l-lysine (PLL) significantly stimulates brown adipogenesis in three-dimensional differentiation of dedifferentiated fat cells (DFATs) within fibrin gels. In this study, we evaluated polyelectrolyte (PE) nanofilms made of PLL and dextran sulfate, applied directly to DFAT surfaces to improve brown adipogenic differentiation through an innovative approach. This approach involved coating the DFAT surfaces with PE nanofilms, forming a multilayer structure that not only provided a supportive matrix but also facilitated the adsorption of essential molecules like T3 and insulin for brown adipogenesis. DFATs coated with three PE layers and encapsulated in fibrin gel showed a significant increase in the adipogenic marker UCP1 gene expression and content. This PLL-based PE nanofilm coating on DFAT surfaces can be a novel and crucial technology for promoting brown adipogenesis in regenerative medicine and healthcare.

Synergistic nanocoating with layer-by-layer functionalized PCL membranes enhanced by manuka honey and essential oils for advanced wound healing

Chronic wounds represent a significant global health concern, statistically impacting 1-2% of the population in developed countries throughout their lifetimes. These wounds cause considerable discomfort for patients and necessitate substantial expenditures of time and resources for treatment. Among the emerging therapeutic approaches, medicated dressings incorporating bioactive molecules, including natural compounds, are particularly promising. Hence, the objective of this study was to develop novel antimicrobial dressings for wound treatment. Specifically, polycaprolactone membranes were manufactured using the electrospinning technique and subsequently coated with natural polyelectrolytes (chitosan as a polycation and a mixture of manuka honey with essential oils nanoemulsions as a polyanion) employing the Layer-by-Layer assembly technique. Physico-chemical and morphological characterization was conducted through QCM-D, FTIR-ATR, XPS, and SEM analyses. The results from SEM and QCM-D demonstrated successful layer deposition and coating formation. Furthermore, FTIR-ATR and XPS analyses distinguished among different coating compositions. The coated membranes were tested in the presence of fibroblast cells, demonstrating biocompatibility and expression of genes coding for VEGF, COL1, and TGF-β1, which are associated with the healing process (assessed through RT-qPCR analysis). Finally, the membranes exhibited excellent antibacterial activity against both Staphylococcus aureus and Pseudomonas aeruginosa, with higher bacterial strain inhibition observed when cinnamon essential oil nanoemulsion was incorporated. Taken together, these results demonstrate the potential application of nanocoated membranes for biomedical applications, such as wound healing.

Chemically engineered plasmonic Au-gallium oxide nanocomposites for harsh environment applications: an investigation into thermal and chemical robustness

Enhanced thermal, chemical, and mechanical properties of different metal nanoparticle morphologies integrated with metal oxides have been reported in multiple instances. The chemical and material robustness of metal nanoparticles incorporated surficially and into the bulk of distinct as well as spontaneously formed morphologies of metal oxides through solution-based and microwave-based approaches are investigated in this study. These composites were tested for their chemical and material robustness by exposing films formed on quartz substrates to high temperatures (800 °C) in an air ambient as well as to extreme conditions of pH, often encountered in harsh environment applications such as sensing and catalysis. The changes in the optical properties and crystallinity have been studied using in situ absorption and ex situ X-ray diffraction analyses and electron microscopy. The trends observed with respect to the changes in the plasmonic absorbance were validated theoretically and found to be in reasonable agreement with the experimental data. Confirmations of the phenomena occurring in different morphologies and architectures were thereby corroborated through careful interpretations from experiments and predictions from theoretical models. We, therefore, report a simple solution-based process for achieving engineered harsh environment-compatible nanocomposites through studies specifically tailored for such applications such as catalysis, sensing, energy storage, and enhanced luminescence.

Natural Polymer-Polyphenol Bioadhesive Coacervate with Stable Wet Adhesion, Antibacterial Activity, and On-Demand Detachment

Medical adhesives are emerging as an important clinical tool as adjuvants for sutures and staples in wound closure and healing and in the achievement of hemostasis. However, clinical adhesives combining cytocompatibility, as well as strong and stable adhesion in physiological conditions, are still in demand. Herein, a mussel-inspired strategy is explored to produce adhesive coacervates using tannic acid (TA) and methacrylate pullulan (PUL-MA). TA|PUL-MA coacervates mainly comprise van der Waals forces and hydrophobic interactions. The methacrylic groups in the PUL backbone increase the number of interactions in the adhesives matrix, resulting in enhanced cohesion and adhesion strength (72.7 Jm-2), compared to the non-methacrylated coacervate. The adhesive properties are kept in physiologic-mimetic solutions (72.8 Jm-2) for 72 h. The photopolymerization of TA|PUL-MA enables the on-demand detachment of the adhesive. The poor cytocompatibility associated with the use of phenolic groups is here circumvented by mixing reactive oxygen species-degrading enzyme in the adhesive coacervate. This addition does not hamper the adhesive character of the materials, nor their anti-microbial or hemostatic properties. This affordable and straightforward methodology, together with the tailorable adhesivity even in wet environments, high cytocompatibility, and anti-bacterial activity, enables foresee TA|PUL-MA as a promising ready-to-use bioadhesive for biomedical applications.

Recent Developments in Layer-by-Layer Assembly for Drug Delivery and Tissue Engineering Applications

Surfaces with biological functionalities are of great interest for biomaterials, tissue engineering, biophysics, and for controlling biological processes. The layer-by-layer (LbL) assembly is a highly versatile methodology introduced 30 years ago, which consists of assembling complementary polyelectrolytes or biomolecules in a stepwise manner to form thin self-assembled films. In view of its simplicity, compatibility with biological molecules, and adaptability to any kind of supporting material carrier, this technology has undergone major developments over the past decades. Specific applications have emerged in different biomedical fields owing to the possibility to load or immobilize biomolecules with preserved bioactivity, to use an extremely broad range of biomolecules and supporting carriers, and to modify the film's mechanical properties via crosslinking. In this review, the focus is on the recent developments regarding LbL films formed as 2D or 3D objects for applications in drug delivery and tissue engineering. Possible applications in the fields of vaccinology, 3D biomimetic tissue models, as well as bone and cardiovascular tissue engineering are highlighted. In addition, the most recent technological developments in the field of film construction, such as high-content liquid handling or machine learning, which are expected to open new perspectives in the future developments of LbL, are presented.

Formulation and Biodegradation of Surface-Supported Biopolymer-Based Microgels Formed via Hard Templating onto Vaterite CaCO3 Crystals

In recent decades, there has been increased attention to the role of layer-by-layer assembled bio-polymer 3D structures (capsules, beads, and microgels) for biomedical applications. Such free-standing multilayer structures are formed via hard templating onto sacrificial cores such as vaterite CaCO3 crystals. Immobilization of these structures onto solid surfaces (e.g., implants and catheters) opens the way for the formulation of advanced bio-coating with a patterned surface. However, the immobilization step is challenging. Multiple approaches based mainly on covalent binding have been developed to localize these multilayer 3D structures at the surface. This work reports a novel strategy to formulate multilayer surface-supported microgels (ss-MG) directly on the surface via hard templating onto ss-CaCO3 pre-grown onto the surface via the direct mixing of Na2CO3 and CaCl2 precursor solutions. ss-MGs were fabricated using biopolymers: polylysine (PLL) as polycation and three polyanions-hyaluronic acid (HA), heparin sulfate (HS), and alginate (ALG). ss-MG biodegradation was examined by employing the enzyme trypsin. Our studies indicate that the adhesion of the ss-MG to the surface and its formation yield directly correlate with the mobility of biopolymers in the ss-MG, which decreases in the sequence of ALG > HA > HS-based ss-MGs. The adhesion of HS-based ss-MGs is only possible via heating during their formation. Dextran-loading increases ss-MG formation yield while reducing ss-MG shrinking. ss-MGs with higher polymer mobility possess slower biodegradation rates, which is likely due to diffusion limitations for the enzyme in more compact annealed ss-MGs. These findings provide valuable insights into the mechanisms underlying the formation and biodegradation of surface-supported biopolymer structures.

Conformational equilibria and interaction preference in the complex of isoprene-maleic anhydride

The rotational spectrum of the isoprene-maleic anhydride complex has been investigated by pulsed jet Fourier transform microwave spectroscopy and interpreted with complementary quantum chemical calculations. Theoretical predictions have yielded four plausible isomers, all residing within an energy window of 12 kJ mol-1. However, two distinct isomers characterized by a π-π stacked configuration have been experimentally observed in pulsed jets, which have differed in the orientation of isoprene over maleic anhydride. The relative population ratio of the two detected isomers has been estimated to be NI/NII ≈ 3/1 from rigorous measurements of the relative intensity on a set of μc-type transitions. Remarkably, this study underscores the pivotal role played by the interaction between the CC bonding orbital (π) of isoprene and the CC antibonding orbital (π*) of maleic anhydride in stabilizing the target complex.

Recent advances in endocrine organoids for therapeutic application

The endocrine system, consisting of the hypothalamus, pituitary, endocrine glands, and hormones, plays a critical role in hormone metabolic interactions. The complexity of the endocrine system is a significant obstacle to understanding and treating endocrine disorders. Notably, advances in endocrine organoid generation allow a deeper understanding of the endocrine system by providing better comprehension of molecular mechanisms of pathogenesis. Here, we highlight recent advances in endocrine organoids for a wide range of therapeutic applications, from cell transplantation therapy to drug toxicity screening, combined with development in stem cell differentiation and gene editing technologies. In particular, we provide insights into the transplantation of endocrine organoids to reverse endocrine dysfunctions and progress in developing strategies for better engraftments. We also discuss the gap between preclinical and clinical research. Finally, we provide future perspectives for research on endocrine organoids for the development of more effective treatments for endocrine disorders.

Cultivation and Transplantation of Three-Dimensional Skins with Laser-Processed Biodegradable Membranes

For the treatment of irreversible, extensive skin damage, artificial skins or cultured skins are useful when allogeneic skins are unavailable. However, most of them lack vasculature, causing delayed perfusion and hence delay or failure in engraftment of the tissues. We previously developed a prevascularized three-dimensional (3D) cultured skin based on the layer-by-layer cell coating technique (LbL-3D skin), in which cells are seeded and laminated on a porous polymer membrane for medium supply to the thick cultured tissue. Recent animal studies have demonstrated that LbL-3D skin can achieve rapid perfusion and high graft survival after transplantation. However, there were practical issues with separating LbL-3D skins from the membranes before transplantation and the handling separated LbL-3D skins for transplantation. To address these problems, in this study, we examined the use of biodegradable porous polymer membranes that enabled the transplantation of LbL-3D skins together with the membranes, which could be decomposed after transplantation. Thin films made from poly (lactic-co-glycolic acid) (PLGA) were irradiated with femtosecond laser pulses to create micro through-holes, producing porous membranes. We designed and fabricated culture inserts with the PLGA membranes and cultivated LbL-3D skins with 2 × 106 neonatal normal human dermal fibroblasts and 1 × 104 human umbilical vein endothelial cells in the dermis of 20 cell layers and 1 × 105 neonatal human epidermal keratinocytes in the epidermis. Histological analyses revealed that the skins cultured on the PLGA membranes had thickness of about 400 μm and that there were no defects in the quality of the skins cultured on the PLGA membranes when compared with those cultured on the conventional (nonbiodegradable) commercial membranes. The cultured LbL-3D skins were then transplanted together with the PLGA membranes onto full-thickness excisional wounds in mice. At 7 days posttransplantation onto a mouse, the tissues above and below the membrane were connected through the holes with collagen-positive fibers that appeared to migrate from both the host and donor sides, and favorable reepithelization was observed throughout the transplanted skin region. However, insufficient engraftment was observed in some cases. Thus, further optimization of the membrane conditions would be needed to improve the transplantation outcome.

Gene-activated titanium implants for gene delivery to enhance osseointegration

Osseointegration is the direct and intimate contact between mineralized tissue and titanium implant at the bone-implant interface. Early establishment and stable maintenance of osseointegration is the key to long-term implant success. However, in patients with compromised conditions such as osteoporosis and patients beginning early load-bearing activities such as walking, lower osseointegration around titanium implants is often observed, which might result in implant early failure. Gene-activated implants show an exciting prospect of combining gene delivery and biomedical implants to solve the problems of poor osseointegration formation, overcoming the shortcomings of protein therapy, including rapid degradation and overdose adverse effects. The conception of gene-activated titanium implants is based on "gene-activated matrix" (GAM), which means scaffolds using non-viral vectors for in situ gene delivery to achieve a long-term and efficient transfection of target cells. Current preclinical studies in animal models have shown that plasmid DNA (pDNA), microRNA (miRNA), and small interference RNA (siRNA) functionalized titanium implants can enhance osseointegration with safety and efficiency, leading to the expectation of applying this technique in dental and orthopedic clinical scenarios. This review aims to comprehensively summarize fabrication strategies, current applications, and futural outlooks of gene-activated implants, emphasizing nucleic acid targets, non-viral vectors, implant surface modification techniques, nucleic acid/vector complexes loading strategies.

Phosphatidylserine liposome multilayers mediate the M1-to-M2 macrophage polarization to enhance bone tissue regeneration

An appropriate immune microenvironment, governed by macrophages, is essential for rapid tissue regeneration after biomaterial implantation. The macrophage phenotypes, M1 (inflammatory) and M2 (anti-inflammatory/healing), exert opposing effects on the repair of various tissues. In this study, a new strategy to promote tissue repair and tissue-to-biomaterial integration by M1-to-M2 macrophage transition using artificial apoptotic cell mimetics (phosphatidylserine liposomes; PSLs) was developed using bone as a model tissue. Titanium was also selected as a model substrate material because it is widely used for dental and orthopedic implants. Titanium implants were functionalized with multilayers via layer-by-layer assembly of cationic protamine and negatively charged PSLs that were chemically stabilized to prevent disruption of lipid bilayers. Samples carrying PSL multilayers could drive M1-type macrophages into M2-biased phenotypes, resulting in a dramatic change in macrophage secretion for tissue regeneration. In a rat femur implantation model, the PSL-multilayer-coated implant displayed augmented de novo bone formation and bone-to-implant integration, associated with an increased M1-to-M2-like phenotypic transition. This triggered the proper generation and activation of bone-forming osteoblasts and bone-resorbing osteoclasts relative to their uncoated counterparts. This study demonstrates the benefit of local M1-to-M2 macrophage polarization induced by PSL-multilayers constructed on implants for potent bone regeneration and bone-to-implant integration. The results of this study may help in the design of new immunomodulatory biomaterials. STATEMENT OF SIGNIFICANCE: Effective strategies for tissue regeneration are essential in the clinical practice. The macrophage phenotypes, M1 (inflammatory) and M2 (anti-inflammatory/healing), exert opposing effects on the repair of various tissues. Artificially produced phosphatidylserine-containing liposomes (PSLs) can induce M2 macrophage polarization by mimicking the inverted plasma membranes of apoptotic cells. This study demonstrates the advantages of local M1-to-M2 macrophage polarization induced by PSL-multilayers constructed on implants for effective bone regeneration and osseointegration (bone-to-implant integration). Mechanistically, M2 macrophages promote osteogenesis but inhibit osteoclastogenesis, and M1 macrophages vice versa. We believe that our study makes a significant contribution to the design of new immunomodulatory biomaterials for regenerative medicine because it is the first to validate the benefit of PSLs for tissue regeneration.

Probing and Manipulating Noncovalent Interactions in Functional Polymeric Systems

Noncovalent interactions, which usually feature tunable strength, reversibility, and environmental adaptability, have been recognized as driving forces in a variety of biological and chemical processes, contributing to the recognition between molecules, the formation of molecule clusters, and the establishment of complex structures of macromolecules. The marriage of noncovalent interactions and conventional covalent polymers offers the systems novel mechanical, physicochemical, and biological properties, which are highly dependent on the binding mechanisms of the noncovalent interactions that can be illuminated via quantification. This review systematically discusses the nanomechanical characterization of typical noncovalent interactions in polymeric systems, mainly through direct force measurements at microscopic, nanoscopic, and molecular levels, which provide quantitative information (e.g., ranges, strengths, and dynamics) on the binding behaviors. The fundamental understandings of intermolecular and interfacial interactions are then correlated to the macroscopic performances of a series of noncovalently bonded polymers, whose functions (e.g., stimuli-responsiveness, self-healing capacity, universal adhesiveness) can be customized through the manipulation of the noncovalent interactions, providing insights into the rational design of advanced materials with applications in biomedical, energy, environmental, and other engineering fields.

Van der Waals Exfoliation Processed Biopiezoelectric Submucosa Ultrathin Films

Piezoelectric biomaterials have attracted significant attention due to the potential effect of piezoelectricity on biological tissues and their versatile applications. However, the high cost and complexity of assembling and domain aligning biomolecules at a large scale, and the disordered arrangement of piezoelectric domains as well as the lack of ferroelectricity in natural biological tissues remain a roadblock toward practical applications. Here, utilizing the weak van der Waals interaction in the layered structure of small intestinal submucosa (SIS), a van der Waals exfoliation (vdWE) process is reported to fabricate ultrathin films down to the thickness of the effective piezoelectric domain. Based on that, the piezoelectric property is revealed of SIS stemming from the collagen fibril, with piezoelectric coefficients up to 4.1 pm V^-1 and in-plane polarization orientation parallel to the fibril axis. Furthermore, a biosensor based on the vdWE-processed SIS film with an in-plane electrode is demonstrated that produces open-circuit voltages of ≈250 mV under the cantilever vibration condition. The vdWE method shows great potential in facilely fabricating ultrathin films of soft tissues and biosensors.

Layer-by-Layer Coating of Single-Cell Lacticaseibacillus rhamnosus to Increase Viability Under Simulated Gastrointestinal Conditions and Use in Film Formation

Probiotics and prebiotics are widely used as functional food ingredients. Viability of probiotics in the food matrix and further in the digestive system is still a challenge for the food industry. Different approaches were used to enhance the viability of probiotics including microencapsulation and layer-by-layer cell coating. The of aim of this study was to evaluate the viability of coated Lacticaseibacillus rhamnosus using a layer-by-layer (LbL) technique with black seed protein (BSP) extracted from Nigella sativa defatted seeds cakes (NsDSC), as a coating material, with alginate, inulin, or glucomannan, separately, and the final number of coating layers was 3. The viable cell counts of the plain and coated L. rhamnosus were determined under sequential simulated gastric fluid (SGF) for 120 min and simulated intestinal fluid (SIF) for 180 min. Additionally, the viability after exposure to 37, 45, and 55°C for 30 min was also determined. Generally, the survivability of coated L. rhamnosus showed significant (p ≤ 0.05) improvement (<4, 3, and 1.5 logs reduction for glucomannan, alginate and inulin, respectively) compared with plain cells (∼6.7 log reduction) under sequential exposure to SGF and SIF. Moreover, the cells coated with BSP and inulin showed the best protection for L. rhamnosus under high temperatures. Edible films prepared with pectin with LbL-coated cells showed significantly higher values in their tensile strength (TS) of 50% and elongation at the break (EB) of 32.5% than pectin without LbL-coated cells. The LbL technique showed a significant protection of probiotic cells and potential use in food application.

Functional Nano-Objects by Electrostatic Self-Assembly: Structure, Switching, and Photocatalysis

The design of functional nano-objects by electrostatic self-assembly in solution signifies an emerging field with great potential. More specifically, the targeted combination of electrostatic interaction with other effects and interactions, such as the positioning of charges on stiff building blocks, the use of additional amphiphilic, π-π stacking building blocks, or polyelectrolytes with certain architectures, have recently promulgated electrostatic self-assembly to a principle for versatile defined structure formation. A large variety of architectures from spheres over rods and hollow spheres to networks in the size range of a few tenths to a few hundred nanometers can be formed. This review discusses the state-of-the-art of different approaches of nano-object formation by electrostatic self-assembly against the backdrop of corresponding solid materials and assemblies formed by other non-covalent interactions. In this regard, particularly promising is the facile formation of triggerable structures, i.e. size and shape switching through light, as well as the use of electrostatically assembled nano-objects for improved photocatalysis and the possible solar energy conversion in the future. Lately, this new field is eliciting an increasing amount of understanding; insights and limitations thereof are addressed in this article. Special emphasis is placed on the interconnection of molecular building block structures and the resulting nanoscale architecture via the key of thermodynamics.

An improved osseointegration of metal implants by pitavastatin loaded multilayer films with osteogenic and angiogenic properties

An increasing number of works have highlighted the importance of metal implants surface modification in enhancing bone defect healing through the synergistic osteogenesis-angiogenesis regulation. Studies have shown that pitavastatin has the effect of promoting osteogenesis and angiogenesis. However, how to prepare pitavastatin functionalized implants and how pitavastatin regulates the synergies of osteogenesis and angiogenesis around implants as well as the related mechanisms remain unclear. In the present study, multilayer films with osteogenic and angiogenic properties were constructed on pure titanium substrates via the layer-by-layer assembly of pitavastatin-loaded β-cyclodextrin grafted chitosan and gelatin. In vitro experiments demonstrated that locally applied pitavastatin could dramatically enhance osteogenic potential of mesenchymal stem cells (MSCs) and angiogenic potential of endothelial cells (ECs). Moreover, pitavastatin loaded multilayer films could regulate the paracrine signaling mediated crosstalk between MSCs and ECs, and indirectly increase the angiogenic potential of MSCs and osteogenic potential of ECs via multiple paracrine signaling. The results of subcutaneous and femur implantation confirmed that locally released pitavastatin had potentially triggered a chain of biological events: mobilizing endogenous stem cells and ECs to the implant-bone interface, in turn facilitating coupled osteogenesis and angiogenesis, and eventually enhancing peri-implant osseointegration. This study enlarges the application scope of pitavastatin and provides an optional choice for developing a multifunctional bioactive coating on the surfaces of mental implants.

Interfacial Steric and Molecular Bonding Effects Contributing to the Stability of Neutrally Charged Nanoemulsions

In cosmetic, pharmaceutical, and food applications, many active ingredients have limited bioavailability in an aqueous environment, and in that context, nanoemulsions provide a mechanism for encapsulation, protection, and transport. These dispersed oil droplets are on the order of 100s of nanometers in diameter and owe their long-term stability to emulsifiers that are commonly charged. More recently, applications have been utilizing nonionic species as stabilizing agents due to their enhanced biosafety. DLVO (named after Derjaguin, Landau, Verwey, and Overbeek) theory has been central in the description of colloid stability, which emphasizes repulsive electrostatic forces, while extended DLVO theory also accounts for steric effects. Past studies of nanoemulsions have largely employed charged surfactants and polyelectrolytes, making it difficult to decouple electrostatic and steric effects as they relate to droplet stability. To better understand steric and molecular factors contributing to the stability of "uncharged" droplets, we have created nanoemulsions with sodium dodecyl sulfate (SDS) and poly(N-vinylacetamide) (PNVA). Though SDS is anionic, with PNVA coating the droplet surfaces, the ζ-potentials of these nanoemulsions are ∼0 mV. Despite minimizing electrostatic contributions, these nanoemulsions are stable for upward of a month with interesting dynamics. By employing dynamic light scattering, vibrational sum frequency scattering spectroscopy, and calculating interaction pair potentials using extended DLVO theory, we learn that the thickness of the PNVA layer plays a critical role in stabilizing these "uncharged" nanoemulsions. Beyond the sterics, the molecular conformation of the PNVA strands also contributes to the droplet stability. The adsorbed PNVA strands are shown to form stratified, rigid polymer networks that prevent the nanoemulsions from rapid destabilization.

Biomimetic Graphene/Spongin Scaffolds for Improved Osteoblasts Bioactivity via Dynamic Mechanical Stimulation

Biomimetics offers excellent prospects for design a novel generation of improved biomaterials. Here the controlled integration of graphene oxide (GO) derivatives with a 3D marine spongin (MS) network is explored to nanoengineer novel smart bio-based constructs for bone tissue engineering. The results point out that 3D MS surfaces can be homogeneously coated by layer-by-layer (LbL) assembly of oppositely charged polyethyleneimine (PEI) and GO. Notably, the GOPEI@MS bionanocomposites present a high structural and mechanical stability under compression tests in wet conditions (shape memory). Dynamic mechanically (2 h of sinusoidal compression cyclic interval (0.5 Hz, 0-10% strain)/14 d) stimulates GOPEI@MS seeded with osteoblast (MC3T3-E1), shows a significant improvement in bioactivity, with cell proliferation being two times higher than under static conditions. Besides, the dynamic assays show that GOPEI@MS bionanocomposites are able to act as mechanical stimulus-responsive scaffolds able to resemble physiological bone extracellular matrix (ECM) requirements by strongly triggering mineralization of the bone matrix. These results prove that the environment created by the system cell-GOPEI@MS is suitable for controlling the mechanisms regulating mechanical stimulation-induced cell proliferation for potential in vivo experimentation.

Novel enzymatic cross-linking-based hydrogel nanofilm caging system on pancreatic β cell spheroid for long-term blood glucose regulation

Pancreatic β cell therapy for type 1 diabetes is limited by low cell survival rate owing to physical stress and aggressive host immune response. In this study, we demonstrate a multilayer hydrogel nanofilm caging strategy capable of protecting cells from high shear stress and reducing immune response by interfering cell-cell interaction. Hydrogel nanofilm is fabricated by monophenol-modified glycol chitosan and hyaluronic acid that cross-link each other to form a nanothin hydrogel film on the cell surface via tyrosinase-mediated reactions. Furthermore, hydrogel nanofilm formation was conducted on mouse β cell spheroids for the islet transplantation application. The cytoprotective effect against physical stress and the immune protective effect were evaluated. Last, caged mouse β cell spheroids were transplanted into the type 1 diabetes mouse model and successfully regulated its blood glucose level. Overall, our enzymatic cross-linking-based hydrogel nanofilm caging method will provide a new platform for clinical applications of cell-based therapies.

Antibiotic-Loaded MMT/PLL-Based Coating on the Surface of Endosseous Implants to Suppress Bacterial Infections

BACKGROUND

Bone infections remain one of the most common and serious complications of orthopedic surgery, posing a tremendous economic burden to society and patients. This is because bacteria colonize and multiply on the surface of the implant. The (MMT/PLL)8 multilayer films have been shown to effectively release antibiotics depending on the changes in the microenvironment. Here, vancomycin was loaded into the (MMT/PLL)8 multilayer films, which were prepared to be used as a local delivery system for the treatment of bone infections.

METHODS

We used the layer-by-layer self-assembly method to prepare VA-loaded coatings (MMT/PLL-VA)8 consisting of montmorillonite (MMT), poly-L-lysine (PLL), and VA. The thickness and surface morphology of coatings were characterized using spectroscopic ellipsometry and scanning electron microscopy (SEM). In order to evaluate the drug release behavior from coatings in different media, we measured the size of the zone of inhibition. Additionally, in vitro antibacterial activity was assessed using the shake-flask culture method and SEM images, while that of in vivo was evaluated by establishing an animal model of bone infection.

RESULTS

Our findings revealed that small-molecule antibiotics were successfully loaded into the (MMT/PLL-VA)8 multilayer film structure during the hierarchical self-assembly process and subsequently the multilayer film structure depicted linear growth behavior. The PLL in the multilayer films was progressively degraded which triggered the VA release when contacted with CMS or bacterial infections. The release of VA from multilayer film structure depends on the concentration changes of CMS. Notably, the multilayer films presented great in vitro cell compatibility. Moreover, the prepared antibacterial multilayer films showed excellent antibacterial property by killing more than 99.99% of S. aureus in 24 h. More importantly, we found that multilayer film exhibits good sterilization effect and biocompatibility under the stimulation of bacterial liquid both in vitro and in vivo antibacterial ability tests.

CONCLUSION

Altogether, this study shows that (MMT/PLL-VA)8 multilayer films containing CMS and bacteria-responsive drug release properties posess high bactericidal activity and good biocompatibility. This finding provides a novel strategy for the treatment of bone infections.

Recent Progress on Vanadium Dioxide Nanostructures and Devices: Fabrication, Properties, Applications and Perspectives

Vanadium dioxide (VO₂) is a typical metal-insulator transition (MIT) material, which changes from room-temperature monoclinic insulating phase to high-temperature rutile metallic phase. The phase transition of VO₂ is accompanied by sudden changes in conductance and optical transmittance. Due to the excellent phase transition characteristics of VO₂, it has been widely studied in the applications of electric and optical devices, smart windows, sensors, actuators, etc. In this review, we provide a summary about several phases of VO₂ and their corresponding structural features, the typical fabrication methods of VO₂ nanostructures (e.g., thin film and low-dimensional structures (LDSs)) and the properties and related applications of VO₂. In addition, the challenges and opportunities for VO₂ in future studies and applications are also discussed.

Fabrication of Artificial Nanobasement Membranes for Cell Compartmentalization in 3D Tissues

In recent decades, tissue engineering techniques have attracted much attention in the construction of 3D tissues or organs. However, even though precise control of cell locations in 3D has been achieved, the organized cell locations are easily destroyed because of the cell migration during the cell culture period. In human body, basement membranes (BMs) maintain the precise cell locations in 3D (compartmentalization). Constructing artificial BMs that mimic the structure and biofunctions of natural BMs remains a major challenge. Here, a nanometer-sized artificial BM through layer-by-layer assembly of collagen type IV (Col-IV) and laminin (LM), chosen because they are the main components of natural BMs, is reported. This multilayered Col-IV/LM nanofilm imitates natural BM structure closely, showing controllable and similar components, thickness, and fibrous network. The Col-IV/LM nanofilms have high cell adhesion properties and maintain the spreading morphology effectively. Furthermore, the barrier effect of preventing cell migration but permitting effective cell-cell crosstalk between fibroblasts and endothelial cells demonstrates the ability of Col-IV/LM nanofilms for cell compartmentalization in 3D tissues, providing more reliable tissue models for evaluating drug efficacy, nanotoxicology, and implantation.

Polyelectrolyte Multilayers Enhance the Dry Storage and pH Stability of Physically Entrapped Enzymes

Polyelectrolyte multilayers (PEMs) are attractive materials for immobilizing enzymes due to their unique ionic environment, which can prevent unfolding. Here, we demonstrated that the stability to dry storage and elevated pH were significantly enhanced when negatively charged nitroreductase (NfsB) was embedded in a PEM by depositing alternating layers of the enzyme and polycation (PC) onto porous silica particles. The PC strength (i.e., pK_a) and the surface charge of the film were varied to probe the effects that internal and surface chemistry had on the pH stability of the entrapped NfsB. All films showed enhanced activity retention at elevated pH (>6), and inactivation at reduced pH (<6) similar to NfsB in solution, indicating that the primary stabilizing effect of immobilization was achieved through ionic interactions between NfsB and the PC and not through changes to the surface charge of the NfsB. Additionally, films that were stored dry at 4 °C for 1 month retained full activity, while those stored at room temperature lost 30% activity. Remarkably, at 50 °C, above the NfsB melting temperature, 40% activity was retained after 1 month of dry storage. Our results suggest that internal film properties are significantly more important than surface charge, which had minor effects on activity. Specifically, immobilization with the weak PC, poly(l-lysine), increased the optimal pH and the activity of immobilized NfsB (which we attribute to greater permeability), relative to immobilization with the strong PC, poly(diallyldimethylammonium chloride). However, NfsB was leached from the PLL film to a greater extent. Overall, these observations demonstrate that internal ionic cross-linking is key to the stabilizing effects of PEMs and that the pH response can be tuned by controlling the number of cross-links (e.g., by changing the strength of the PC). However, this may be at the cost of reduced loading, illustrating the necessity of simultaneously optimizing enzyme loading, internal ionic cross-linking, and substrate transport.

Modeling Cardiovascular Diseases with hiPSC-Derived Cardiomyocytes in 2D and 3D Cultures

In the last decade, the generation of cardiac disease models based on human-induced pluripotent stem cells (hiPSCs) has become of common use, providing new opportunities to overcome the lack of appropriate cardiac models. Although much progress has been made toward the generation of hiPSC-derived cardiomyocytes (hiPS-CMs), several lines of evidence indicate that two-dimensional (2D) cell culturing presents significant limitations, including hiPS-CMs immaturity and the absence of interaction between different cell types and the extracellular matrix. More recently, new advances in bioengineering and co-culture systems have allowed the generation of three-dimensional (3D) constructs based on hiPSC-derived cells. Within these systems, biochemical and physical stimuli influence the maturation of hiPS-CMs, which can show structural and functional properties more similar to those present in adult cardiomyocytes. In this review, we describe the latest advances in 2D- and 3D-hiPSC technology for cardiac disease mechanisms investigation, drug development, and therapeutic studies.

Preparation of multifunctional poly(l-lactic acid) film using heparin-mimetic polysaccharide multilayers: Hemocompatibility, cytotoxicity, antibacterial and drug loading/releasing properties

Poly(l-lactic acid) (PLLA) has been the most commonly used polymer for making bioresorbable vascular scaffolds (BVS). Despite owning remarkable properties, BVS made from PLLA are facing higher rates of early thrombosis compared with permanent metallic scaffolds. To solve this issue, we modified the PLLA film surface with heparin-mimetic polysaccharide multilayers consisting of sulfated Chinese yam polysaccharide (SCYP) and chitosan (CS) through layer-by-layer (LBL) assembly. The surface chemical compositions, morphologies and growth manner of SCYP/CS multilayers were investigated using X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy and UV-vis spectroscopy. The relevant hemocompatibility results showed that multilayer-modified PLLA could effectively resist protein adsorption, suppress the platelet adhesion, prolong clotting time, prevent contact and complement activation as well as reduce hemolysis rate. Moreover, the multilayer-modified PLLA exhibited non-cytotoxicity, good antibacterial ability against E. coli and S. aureus, and drug loading/sustained releasing behavior. Overall, the multifunctional PLLA film with integrated properties of hemocompatibility, non-cytotoxicity, antibacterial and drug loading/releasing behavior could be successfully achieved by deposition of SCYP/CS multilayers, which will have potential application in blood-contacting biomedical materials.

A Layer-by-Layer Single-Cell Coating Technique To Produce Injectable Beating Mini Heart Tissues via Microfluidics

Human induced pluripotent stem cells (hiPSCs) are used as an alternative for human embryonic stem cells. Cardiomyocytes derived from hiPSCs are employed in cardiac tissue regeneration constructs due to the heart's low regeneration capacity after infarction. A coculture of hiPSC-CM and primary dermal fibroblasts is encapsulated in injectable poly(ethylene glycol)-based microgels via microfluidics to enhance the efficiency of regenerative cell transplantations. The microgels are prepared via Michael-type addition of multi-arm PEG-based molecules with an enzymatically degradable peptide as a cross-linker and modified with a cell-adhesive peptide. Cell-cell interactions and, consequently, cell viability are improved by a thin extracellular matrix (ECM) coating formed on the cell surfaces via layer-by-layer (LbL) deposition. The beating strength of encapsulated cardiomyocytes (∼60 BPM) increases by 2-fold compared to noncoated cells. The combination of microfluidics with the LbL technique offers a new technology to fabricate functional cardiac mini tissues for cell transplantation therapies.

Molecular Assemblies of Biomimetic Microcapsules

Layer-by-layer (LbL) assembly is a most commonly used method to prepare various microcapsules based on the electrostatic interactions, hydrogen bonding, covalent bonding, and so on. Among these interactions, Schiff base bond formed in covalent assembly not only has an advantage in stability, but also enables the assembled microcapsules with autofluorescence and pH sensitivity. In this Article, we will mainly describe the construction of biomimetic microcapsules through Schiff base mediated LbL assembly. The structures and properties of the assembled microcapsules are introduced and their applications as drug carriers are highlighted.

Light sheet fluorescence microscopy versus confocal microscopy: in quest of a suitable tool to assess drug and nanomedicine penetration into multicellular tumor spheroids

We recently constructed a multicellular spheroid model of pancreatic tumor based on a triple co-culture of cancer cells, fibroblasts and endothelial cells and characterized by the presence of fibronectin, an important component of the tumor extracellular matrix. By combining cancer cells and stromal components, this model recreates in vitro the three-dimensional (3D) architecture of solid tumors. In this study, we used these hetero-type spheroids as a tool to assess the penetration of doxorubicin (used as a model drug) through the whole tumor mass either in a free form or loaded into polymer nanoparticles (NPs), and we investigated whether microscopy images, acquired by Confocal Laser Scanning Microscopy (CLSM) and Light Sheet Fluorescence Microscopy (LSFM), would be best to provide reliable information on this process. Results clearly demonstrated that CLSM was not suitable to accurately monitor the diffusion of small molecules such as the doxorubicin. Indeed, it only allowed to scan a layer of 100 µm depth and no information on deeper layers could be available because of a progressive loss of the fluorescence signal. On the contrary, a complete 3D tomography of the hetero-type multicellular tumor spheroids (MCTS) was obtained by LSFM and multi-view image fusion which revealed that the fluorescent molecule was able to reach the core of spheroids as large as 1 mm in diameter. However, no doxorubicin-loaded polymer nanoparticles were detected in the spheroids, highlighting the challenge of nanomedicine delivery through biological barriers. Overall, the combination of hetero-type MCTS and LSFM allowed to carry out a highly informative microscopic assessment and represents a suitable approach to precisely follow up the drug penetration in tumors. Accordingly, it could provide useful support in the preclinical investigation and optimization of nanoscale systems for drug delivery to solid tumors.

A novel strategy to engineer pre-vascularized 3-dimensional skin substitutes to achieve efficient, functional engraftment

Autologous split-thickness skin grafts are the preferred treatment for excised burn wounds, but donor sites for autografting are often limited in patients with extensive burns. A number of alternative treatments are already in use to treat large burns and ulcers. Despite intense efforts to develop tissue-engineered skin, delayed or absent vascularization is one of the major reasons for tissue-engineered skin engraftment failure. To overcome these problems, we developed a scaffold-free 3-dimensional (3D) skin substitute containing vascular networks that combine dermal fibroblasts, endothelial cells, and epidermal keratinocytes based on our layer-by-layer cell coating technique. We transplanted the pre-vascularized 3D skin substitutes onto full-thickness skin defects on severe combined immunodeficiency mice to assess their integration with the host tissue and effects on wound healing. We used non-vascularized 3D skin substitutes as a control. Vessels containing red blood cells were evident in the non-vascularized control by day 14. However, blood perfusion of the human-derived vasculature could be detected within 7 days of grafting. Moreover, the pre-vascularized 3D skin substitutes had high graft survival and their epidermal layers were progressively replaced by mouse epidermis. We propose that a novel dermo-epidermal 3D skin substitute containing blood vessels can promote efficient reconstruction of full-thickness skin defects.

Biomedical Applications of Layer-by-Layer Self-Assembly for Cell Encapsulation: Current Status and Future Perspectives

Encapsulating living cells within multilayer functional shells is a crucial extension of cellular functions and a further development of cell surface engineering. In the last decade, cell encapsulation has been widely utilized in many cutting-edge biomedical fields. Compared with other techniques for cell encapsulation, layer-by-layer (LbL) self-assembly technology, due to the versatility and tunability to fabricate diverse multilayer shells with controllable compositions and structures, is considered as a promising approach for cell encapsulation. This review summarizes the state-of-the-art and potential future biomedical applications of LbL cell encapsulation. First of all, a brief introduction to the LbL self-assembly technique, including assembly mechanisms and technologies, is made. Next, different cell encapsulation strategies by LbL self-assembly techniques are explained. Then, the biomedical applications of LbL cell encapsulation in cell-based biosensors, cell transplantation, cell/molecule delivery, and tissue engineering, are highlighted. Finally, discussions on the current limitations and future perspectives of LbL cell encapsulation are also provided.

Layer-by-layer assembly of nanofilms to control cell functions

Control of cell functions by layer-by-layer assembly has a great challenge in tissue engineering and biomedical applications. We summarize current hot approaches in this review.

Covalent layer-by-layer thin films with charge-transfer chromophores: side chain engineering for efficient Ag+ ion recognition in aqueous solutions

Covalent layer-by-layer (LbL) thin films are fabricated by a highly efficient [2+2] cycloaddition-retroelectrocyclization (CA-RE) reaction of aniline-substituted alkyne and 7,7,8,8-tetracyanoquinodimethane (TCNQ) moieties. Polystyrene bearing aniline-substituted alkyne side chains and TCNQ polyester were prepared as precursor polymers, then sequentially deposited and fixed by covalent bonds on an indium-tin-oxide (ITO) substrate. The successful alternate growth of the films was demonstrated by many techniques including absorption spectroscopy, surface roughness, and redox activities. Interestingly, the water contact angles of the film surface were dependent on the side chains of the polystyrene derivatives. When hydrophilic triethylene glycol was employed, the surface hydrophilicity was similar to that of the TCNQ polyester. In contrast, the use of hydrophobic n-hexyl groups resulted in a significant difference in the water contact angles between the polystyrene and TCNQ polyester. A similar difference occurred when the Ag+ ion recognition was studied by soaking the LbL films in aqueous solutions. The LbL films constructed from the polystyrene with triethylene glycol chains displayed a more rapid and significant recognition of Ag+ ions than those constructed from the polystyrene with n-hexyl chains.

Chitosan/silk fibroin modified nanofibrous patches with mesenchymal stem cells prevent heart remodeling post-myocardial infarction in rats

Poor functional survival of the engrafted stem cells limits the therapeutic efficacy of stem-cell-based therapy for myocardial infarction (MI). Cardiac patch-based system for cardiac repair has emerged as a potential regenerative strategy for MI. This study aimed to design a cardiac patch to improve the retention of the engrafted stem cells and provide mechanical scaffold for preventing the ventricular remodeling post-MI. The patches were fabricated with electrospinning cellulose nanofibers modified with chitosan/silk fibroin (CS/SF) multilayers via layer-by-layer (LBL) coating technology. The patches engineered with adipose tissue-derived mesenchymal stem cells (AD-MSCs) (cell nano-patch) were adhered to the epicardium of the infarcted region in rat hearts. Bioluminescence imaging (BLI) revealed higher cell viability in the cell nano-patch group compared with the intra-myocardial injection group. Echocardiography demonstrated less ventricular remodeling in cell nano-patch group, with a decrease in the left ventricular end-diastolic volume and left ventricular end-systolic volume compared with the control group. Additionally, left ventricular ejection fraction and fractional shortening were elevated after cell nano-patch treatment compared with the control group. Histopathological staining demonstrated that cardiac fibrosis and apoptosis were attenuated, while local neovascularization was promoted in the cell nano-patch group. Western blot analysis illustrated that the expression of biomarkers for myocardial fibrosis (TGF-β1, P-smad3 and Smad3) and ventricular remodeling (BNP, β-MHC: α-MHC ratio) were decreased in cell nano patch-treated hearts. This study suggests that CS/SF-modified nanofibrous patches promote the functional survival of engrafted AD-MSCs and restrain ventricular remodeling post-MI through attenuating myocardial fibrosis. STATEMENT OF SIGNIFICANCE: First, the nanofibrous patches fabricated from the electrospun cellulose nanofibers could mimic the natural extracellular matrix (ECM) of hearts to improve the microenvironment post-MI and provide three dimensional (3D) scaffolds for the engrafted AD-MSCs. Second, CS and SF which have exhibited excellent properties in previous tissue engineering research, such as nontoxicity, biodegradability, anti-inflammatory, strong hydrophilic nature, high cohesive strength, and intrinsic antibacterial properties further optimized the biocompatibility of the nanofibrous patches via LBL modification. Finally, the study revealed that beneficial microenvironment and biomimetic ECM improve the retention and viability of the engrafted AD-MSCs and the mechanical action of the cell nano-patches for the expanding ventricular post-MI leads to suppression of HF progression by inhibition of ventricular remodeling.

In vitro placenta barrier model using primary human trophoblasts, underlying connective tissue and vascular endothelium

Fetal development may be compromised by adverse events at the placental interface between mother and fetus. However, it is still unclear how the communication between mother and fetus occurs through the placenta. In vitro - models of the human placental barrier, which could help our understanding and which recreate three-dimensional (3D) structures with biological functionalities and vasculatures, have not been reported yet. Here we present a 3D-vascularized human primary placental barrier model which can be constructed in 1 day. We illustrate the similarity of our model to first trimester human placenta, both in its structure and in its ability to respond to altered oxygen and to secrete factors that cause damage cells across the barrier including embryonic cortical neurons. We use this model to highlight the possibility that both the trophoblast and the endothelium within the placenta might play a role in the fetomaternal dialogue.

[Development of innovative three-dimensional tissues and their application for pharmaceutical assays]

Three-dimensional (3D) cardiac myoblast tissues derived from iPS cells were constructed by cell coating technology with nanometer-sized extracellular matrix. Vascularized 3D-cardiac tissues were also fabricated by employing cardiac endothelial cells. These 3D-cardiac tissues are expected to apply to pharmaceutical assays.

Biomimetic Layer-by-Layer Self-Assembly of Nanofilms, Nanocoatings, and 3D Scaffolds for Tissue Engineering

Achieving surface design and control of biomaterial scaffolds with nanometer- or micrometer-scaled functional films is critical to mimic the unique features of native extracellular matrices, which has significant technological implications for tissue engineering including cell-seeded scaffolds, microbioreactors, cell assembly, tissue regeneration, etc. Compared with other techniques available for surface design, layer-by-layer (LbL) self-assembly technology has attracted extensive attention because of its integrated features of simplicity, versatility, and nanoscale control. Here we present a brief overview of current state-of-the-art research related to the LbL self-assembly technique and its assembled biomaterials as scaffolds for tissue engineering. An overview of the LbL self-assembly technique, with a focus on issues associated with distinct routes and driving forces of self-assembly, is described briefly. Then, we highlight the controllable fabrication, properties, and applications of LbL self-assembly biomaterials in the forms of multilayer nanofilms, scaffold nanocoatings, and three-dimensional scaffolds to systematically demonstrate advances in LbL self-assembly in the field of tissue engineering. LbL self-assembly not only provides advances for molecular deposition but also opens avenues for the design and development of innovative biomaterials for tissue engineering.

Fabrication of engineered tubular tissue for small blood vessels via three-dimensional cellular assembly and organization ex vivo

Although there is a great need for suitable vascular replacements in clinical practice, much progress needs to be made toward the development of a fully functional tissue-engineered construct. We propose a fabrication method of engineered tubular tissue for small blood vessels via a layer-by-layer cellular assembly technique using mouse smooth muscle cells, the construction of a poly-(l-lactide-co-ε-caprolactone) (PLCL) scaffold, and integration in a microfluidic perfusion culture system. The cylindrical PLCL scaffold is incised, expanded, and its surface is laminated with the cell layers. The construct confirms into tubular structures due to residual stress imposed by the cylindrical PLCL scaffold. The perfusion culture system allows simulation of static, perfusion (laminar flow), and perfusion with pulsatile pressure (Pulsatile flow) conditions in which mimicking the in vivo environments. The aim of this evaluation was to determine whether fabricated tubular tissue models developed their mechanical properties. The cellular response to hemodynamic stimulus imposed by the dynamic culture system is monitored through expression analysis of fibrillin-1 and fibrillin-2, elastin and smooth muscle myosin heavy chains isoforms transcription factors, which play an important role in tissue elastogenesis. Among the available materials for small blood vessel construction, these cellular hybrid vascular scaffolds hold much potential due to controllability of the mechanical properties of synthetic polymers and biocompatibility of integrated cellular components.

Strategic Advances in Formation of Cell-in-Shell Structures: From Syntheses to Applications

Single-cell nanoencapsulation, forming cell-in-shell structures, provides chemical tools for endowing living cells, in a programmed fashion, with exogenous properties that are neither innate nor naturally achievable, such as cascade organic-catalysis, UV filtration, immunogenic shielding, and enhanced tolerance in vitro against lethal factors in real-life settings. Recent advances in the field make it possible to further fine-tune the physicochemical properties of the artificial shells encasing individual living cells, including on-demand degradability and reconfigurability. Many different materials, other than polyelectrolytes, have been utilized as a cell-coating material with proper choice of synthetic strategies to broaden the potential applications of cell-in-shell structures to whole-cell catalysis and sensors, cell therapy, tissue engineering, probiotics packaging, and others. In addition to the conventional "one-time-only" chemical formation of cytoprotective, durable shells, an approach of autonomous, dynamic shellation has also recently been attempted to mimic the naturally occurring sporulation process and to make the artificial shell actively responsive and dynamic. Here, the recent development of synthetic strategies for formation of cell-in-shell structures along with the advanced shell properties acquired is reviewed. Demonstrated applications, such as whole-cell biocatalysis and cell therapy, are discussed, followed by perspectives on the field of single-cell nanoencapsulation.