High performance field-effect ammonia sensors based on a structured ultrathin organic semiconductor film

High-Performance Room Temperature Ammonia Sensors Based on Pure Organic Molecules Featuring B-N Covalent Bond

Exploring organic semiconductor gas sensors with high sensitivity and selectivity is crucial for the development of sensor technology. Herein, for the first time, a promising chemiresistive organic polymer P-BNT based on a novel π-conjugated triarylboron building block is reported, showcasing an excellent responsivity over 30 000 (Ra/Rg) against 40 ppm of NH3, which is ≈3300 times higher than that of its B-N organic small molecule BN-H. More importantly, a molecular induction strategy to weaken the bond dissociation energy between polymer and NH3 caused by strong acid-base interaction is further executed to optimize the response and recovery time. As a result, the BN-H/P-BNT system with rapid response and recovery times can still exhibit a high responsivity of 718, which is among the highest reported NH3 chemiresistive sensors. Supported by in situ FTIR spectroscopy and theoretical calculations, it is revealed that the N-H fractions in BN-H small molecule promoted the charge distribution on phenyl groups, which increases charge delocalization and is more conducive to gas adsorption in such molecular systems. Notably, these distinctive small molecules also promoted charge transfer and enhanced electron concentration of the P-BNT sensing polymer, thus achieving superior B-N-containing organic molecules with excellent sensing performance.

Flexible Organic Transistors for Biosensing: Devices and Applications

Flexible and stretchable biosensors can offer seamless and conformable biological-electronic interfaces for continuously acquiring high-fidelity signals, permitting numerous emerging applications. Organic thin film transistors (OTFTs) are ideal transducers for flexible and stretchable biosensing due to their soft nature, inherent amplification function, biocompatibility, ease of functionalization, low cost, and device diversity. In consideration of the rapid advances in flexible-OTFT-based biosensors and their broad applications, herein, a timely and comprehensive review is provided. It starts with a detailed introduction to the features of various OTFTs including organic field-effect transistors and organic electrochemical transistors, and the functionalization strategies for biosensing, with a highlight on the seminal work and up-to-date achievements. Then, the applications of flexible-OTFT-based biosensors in wearable, implantable, and portable electronics, as well as neuromorphic biointerfaces are detailed. Subsequently, special attention is paid to emerging stretchable organic transistors including planar and fibrous devices. The routes to impart stretchability, including structural engineering and material engineering, are discussed, and the implementations of stretchable organic transistors in e-skin and smart textiles are included. Finally, the remaining challenges and the future opportunities in this field are summarized.

Enhancing Sensitivity in Gas Detection: Porous Structures in Organic Field-Effect Transistor-Based Sensors

Gas detection is crucial for detecting environmentally harmful gases. Organic field-effect transistor (OFET)-based gas sensors have attracted attention due to their promising performance and potential for integration into flexible and wearable devices. This review examines the operating mechanisms of OFET-based gas sensors and explores methods for improving sensitivity, with a focus on porous structures. Researchers have achieved significant enhancements in sensor performance by controlling the thickness and free volume of the organic semiconductor layer. Additionally, innovative fabrication techniques like self-assembly and etching have been used to create porous structures, facilitating the diffusion of target gas molecules, and improving sensor response and recovery. These advancements in porous structure fabrication suggest a promising future for OFET-based gas sensors, offering increased sensitivity and selectivity across various applications.

High Sensitivity and Ultra-Broad-Range NH3 Sensor Arrays by Precise Control of Step Defects on The Surface of Cl2-Ndi Single Crystals

Vapor sensors with both high sensitivity and broad detection range are technically challenging yet highly desirable for widespread chemical sensing applications in diverse environments. Generally, an increased surface-to-volume ratio can effectively enhance the sensitivity to low concentrations, but often with the trade-off of a constrained sensing range. Here, an approach is demonstrated for NH3 sensor arrays with an unprecedentedly broad sensing range by introducing controllable steps on the surface of an n-type single crystal. Step edges, serving as adsorption sites with electron-deficient properties, are well-defined, discrete, and electronically active. NH3 molecules selectively adsorb at the step edges and nearly eliminate known trap-like character, which is demonstrated by surface potential imaging. Consequently, the strategy can significantly boost the sensitivity of two-terminal NH3 resistance sensors on thin crystals with a few steps while simultaneously enhancing the tolerance on thick crystals with dense steps. Incorporation of these crystals into parallel sensor arrays results in ppb-to-% level detection range and a convenient linear relation between sheet conductance and semi-log NH3 concentration, allowing for the precise localization of vapor leakage. In general, the results suggest new opportunities for defect engineering of organic semiconductor crystal surfaces for purposeful vapor or chemical sensing.

Self-Assembled Monolayers for Interfacial Engineering in Solution-Processed Thin-Film Electronic Devices: Design, Fabrication, and Applications

Interfacial engineering has long been a vital means of improving thin-film device performance, especially for organic electronics, perovskites, and hybrid devices. It greatly facilitates the fabrication and performance of solution-processed thin-film devices, including organic field effect transistors (OFETs), organic solar cells (OSCs), perovskite solar cells (PVSCs), and organic light-emitting diodes (OLEDs). However, due to the limitation of traditional interfacial materials, further progress of these thin-film devices is hampered particularly in terms of stability, flexibility, and sensitivity. The deadlock has gradually been broken through the development of self-assembled monolayers (SAMs), which possess distinct benefits in transparency, diversity, stability, sensitivity, selectivity, and surface passivation ability. In this review, we first showed the evolution of SAMs, elucidating their working mechanisms and structure-property relationships by assessing a wide range of SAM materials reported to date. A comprehensive comparison of various SAM growth, fabrication, and characterization methods was presented to help readers interested in applying SAM to their works. Moreover, the recent progress of the SAM design and applications in mainstream thin-film electronic devices, including OFETs, OSCs, PVSCs and OLEDs, was summarized. Finally, an outlook and prospects section summarizes the major challenges for the further development of SAMs used in thin-film devices.

Self-Healing, Laminated, and Low Resistance NH3 Sensor Based on 6,6',6″-(Nitrilotris(benzene-4,1-diyl))tris(5-phenylpyrazine-2,3-dicarbonitrile) Sensing Material Operating at Room Temperature

With the rapid development of the concept of the Internet of Things (IoT), gas sensors with the function of simulating the human sense of smell became irreplaceable as a key element. Among them, ammonia (NH3) sensors played an important role in respiration tests, environmental monitoring, safety, and other fields. However, the fabrication of the high-performance device with high stability and resistance to mechanical damages was still a challenge. In this work, polyurethane (PU) with excellent self-healing ability was applied as the substrate, and the sensor was designed from new sensitive material design and device structure optimization, through applying the organic molecule with groups which could absorb NH3 and the laminated structure to shorten the electronic transmission path to achieve a low resistance state and favorable sensing properties. Accordingly, a room temperature flexible NH3 sensor based on 6,6',6″-(nitrilotris(benzene-4,1-diyl))tris(5-phenylpyrazine-2,3-dicarbonitrile) (TPA-3DCNPZ) was successfully developed. The device could self-heal by means of a thermal evaporation assisted method. It exhibited a detection limit of 1 ppm at 98% relative humidity (RH), as well as great stability, selectivity, bending flexibility, and self-healing properties. The improved NH3 sensing performance under high RH was further investigated by complex impedance plots (CIPs) and density functional theory (DFT), attributing to the enhanced adsorption of NH3. The TPA-3DCNPZ based NH3 sensors proved to have great potential for application on simulated exhaled breath to determine the severity of kidney diseases and the progress of treatment. This work also provided new ideas for the construction of high-performance room temperature NH3 sensors.

Enhancement of NO2 Gas Sensing Properties of Polypyrrole by Polarization Doping with DBS: Experimental and DFT Studies

A new technique of polarization doping was adopted to improve NO2 gas sensing properties of the polypyrrole (PPy) sensor. PPy nanosheets polarization doped with sodium dodecyl benzenesulfonate (SDBS) were synthesized by low-temperature polymerization. The semiagglomerated PPy nanosheets were well-dispersed and a large specific surface areas due to the introduction of dodecyl benzenesulfonate (DBS). The DBS doped PPy sensor shows excellent NO2 sensing performance. Polarization of sulfonate ions to PPy enhanced the adsorption ability of NO2 with the synergistic effect of NO2. The adsorption energy (-0.676 eV) and electron transfer (0.521 |e|) of PPy to NO2 increased greatly after doping. An unoccupied electron state is observed in the valence band electron structure of PPy/DBS after the adsorption of NO2 by calculations of Density Functional Theory (DFT). The intermolecular synergy between NO2 and PPy/DBS causes a strong polarization, resulting in a high polarization potential, which enhances the NO2 sensing performance of PPy sensor. It is of great significance to develop NO2 detection device based on PPy that works at room temperature.

Thin Films of Chlorinated Vanadyl Phthalocyanines as Active Layers of Chemiresistive Sensors for the Detection of Ammonia

Halogenated metal phthalocyanines are promising materials for the manufacture of active layers of chemiresistive sensors for the detection of various gases. Despite the high interest in such sensors, there are few systematic studies of the position of halogen substituents in phthalocyanine macroring on the chemiresistive response of their films to gases. In this work, we prepared and studied films of novel tetrachlorosubstituted vanadyl phthalocyanine derivatives with Cl substituents in the peripheral (VOPcCl4-p) and nonperipheral (VOPcCl4-np) positions of the phthalocyanine ring as active layers of chemiresistive sensors to reveal the effect of the position of substituents on their structure and sensor response to low concentrations of NH3. It was shown that the films of VOPcCl4-p exhibited a noticeably higher sensor response to NH3 than the VOPcCl4-np ones. The limit of detection of NH3 was 0.7 ppm. The sensing layers demonstrated a reversible sensor response at room temperature with fairly low response/recovery times. It was also demonstrated that NH3 can be detected in the presence of various interfering gases (CO2 and H2) and some volatile organic vapors, as well as in a mixture of gases with a composition close to exhaled air.

Charge Transport Manipulation via Interface Doping: Achieving Ultrasensitive Organic Semiconductor Gas Sensors

Organic semiconductor (OSC) gas sensors are receiving tremendous attention with the rise of wearable devices. Due to the complicated charge transport characteristics of OSCs, it is usually difficult to optimize their gas sensitivity by directly tailoring the original signals, as in many other kinds of sensors. Instead, device engineering strategies are frequently centered on enhancing the gas-film interaction. Herein, by introducing interface doping between self-assembled monolayers and triisopropylsilylethynyl-substituted pentacene films, we report a wide tuning of OSC gas sensitivity via charge transport manipulation and achieve an ultrahigh sensitivity of nearly 2000%/ppm to NO₂, simultaneously resulting in a fast square-wave-like response feature. In addition, this sensor demonstrates good humidity stability and operates well in flexible devices. More importantly, we identify that charge transport manipulation tailors the gas sensibility of OSCs by means of electronic structure instead of original signal values: compared to shallow traps, the presence of proper deep traps is conducive to gaining high sensitivity and ultrafast response/recovery speeds. This approach is also effective for tuning the sensitivity to reductive gases, verifying its generality for promoting the performance of OSC gas sensors, as well as a promising strategy for other types of sensors or detectors.

Microstructural Control of Soluble Acene Crystals for Field-Effect Transistor Gas Sensors

Microstructural control during the solution processing of small-molecule semiconductors (namely, soluble acene) is important for enhancing the performance of field-effect transistors (FET) and sensors. This focused review introduces strategies to enhance the gas-sensing properties (sensitivity, recovery, selectivity, and stability) of soluble acene FET sensors by considering their sensing mechanism. Defects, such as grain boundaries and crystal edges, provide diffusion pathways for target gas molecules to reach the semiconductor-dielectric interface, thereby enhancing sensitivity and recovery. Representative studies on grain boundary engineering, patterning, and pore generation in the formation of soluble acene crystals are reviewed. The phase separation and microstructure of soluble acene/polymer blends for enhancing gas-sensing performance are also reviewed. Finally, flexible gas sensors using soluble acenes and soluble acene/polymer blends are introduced, and future research perspectives in this field are suggested.

Sensitivity of gas sensors enhanced by functionalization of hexabenzoperylene in solution-processed monolayer organic field effect transistors

Solution-processed monolayer films consisting of unfunctionalized and functionalized hexabenzoperylenes in a single homogeneous phase have enabled highly sensitive detection of NH₃ and NO₂ on the basis of organic field effect transistors.

Organic ultrathin nanostructure arrays: materials, methods and applications

Organic ultrathin semiconductor nanostructures have attracted continuous attention in recent years owing to their excellent charge transport capability, favorable flexibility, solution-processability and adjustable photoelectric properties, providing opportunities for next-generation optoelectronic applications. For integrated electronics, organic ultrathin nanostructures need to be prepared as large-area patterns with precise alignment and high crystallinity to achieve organic electronic devices with high performance and high throughput. However, the fabrication of organic ultrathin nanostructure arrays still remains challenging due to uncontrollable growth along the height direction in solution processes. In this review, we first introduce the properties, assembly methods and applications of four typical organic ultrathin nanostructures, including small molecules, polymers, and other organic-inorganic hybrid materials. Five categories of representative solution-processing techniques for patterning organic micro- and nanostructures are summarized and discussed. Finally, challenges and perspectives in the controllable preparation of organic ultrathin arrays and potential applications are featured on the basis of their current development.

Role of Interfacial Interactions in the Graphene-Directed Assembly of Monolayer Conjugated Polymers

Development of graphene-organic hybrid electronics is one of the most promising directions for next-generation electronic materials. However, it remains challenging to understand the graphene-organic semiconductor interactions right at the interface, which is key to designing hybrid electronics. Herein, we study the influence of graphene on the multiscale morphology of solution-processed monolayers of conjugated polymers (PII-2T, DPP-BTz, DPP2T-TT, and DPP-T-TMS). The strong interaction between graphene and PII-2T was manifested in the high fiber density and high film coverage of monolayer films deposited on graphene compared to plasma SiO2 substrates. The monolayer films on graphene also exhibited a higher relative degree of crystallinity and dichroic ratio or polymer alignment, i.e., higher degree of order. Raman spectroscopy revealed the increased backbone planarity of the conjugated polymers upon deposition on graphene as well as the existence of electronic interaction across the interface. This speculation was further substantiated by the results of photoelectron spectroscopy (XPS and UPS) of PII-2T, which showed a decrease in binding energy of several atomic energy levels, movement of the Fermi level toward HOMO, and an increase in work function, all of which indicate p-doping of the polymer. Our results provide a new level of understanding on graphene-polymer interactions at nanoscopic interfaces and the consequent impact on multiscale morphology, which will aid in the design of efficient graphene-organic hybrid electronics.

Polymer Electrolyte Dielectrics Enable Efficient Exciton-Polaron Quenching in Organic Semiconductors for Photostable Organic Transistors

The photoelectric response of organic field-effect transistors (OFETs) will cause severe photoelectric interference, which hinders the applications of OFETs in the light environment. It is highly challenging to relieve this problem because of the high photosensitivity of most organic semiconductors. Here, we propose an efficient "exciton-polaron quenching" strategy to suppress the photoelectric response and thus construct highly photostable OFETs by utilizing a polymer electrolyte dielectric─poly(acrylic acid) (PAA). This dielectric produces high-density polarons in organic semiconductors under a gate electric field that quench the photogenerated excitons with high efficiency (∼70%). As a result, the OFETs with PAA dielectric exhibit unprecedented photostability against strong light irradiation up to 214 mW/cm², which far surpasses the reported values and solar irradiance value (∼138 mW/cm²). The strategy shows high universality in OFETs with different OSCs and electrolytes. As a demonstration, the photostable OFET can stably drive an organic light-emitting diode (OLED) under light irradiation. This work presents an efficient exciton modulation strategy in OSC and proves a high potential in practical applications.

Metal-Organic-Framework-Decorated Carbon Nanofibers with Enhanced Gas Sensitivity When Incorporated into an Organic Semiconductor-Based Gas Sensor

Because of their high porosity, metal-organic framework (MOF) materials have attracted much attention for use in gas-sensing applications. However, problems with the processability of MOFs for use in reliable gas-sensing electronics remain unsolved. Herein, combination of the strong gas-adsorbing properties of MOF nanomaterials and organic thin-film transistor-type chemical sensors is proposed and experimentally demonstrated. The hybrid blend system with inorganic MOF nanomaterials and organic semiconductors likely exhibits thermodynamic instability because of each phase's self-aggregation, which is difficult to settle without surface functionalization. We propose a novel method to produce an inorganic-organic hybrid sensor by introducing carbon nanofibers as a scaffold. We demonstrate that the carbon nanofibers perform dual functions: enabling the attachment of MOF nanoparticles at the fiber surface, which stabilizes the nanoparticle-embedded polymer layer, and maintaining reliable conductivity for improved gas-sensing performance. On the basis of our characterization of their nanomorphology and nanocrystal structure, the MOF nanoparticles and carbon nanofibers are shown to render a hybrid core-shell structure in the conjugated polymer matrix. This organic-inorganic hybrid system was incorporated into a field-effect transistor device to detect hazardous NO₂ gas analytes, operating in real-time with high responsivity. The prototype chemical sensor holds enormous promise for other chemical sensors.

Power-Efficient Gas-Sensing and Synaptic Diodes Based on Lateral Pentacene/a-IGZO PN Junctions

Function convergence of gas sensing and neuromorphic computing is attracting much research attention due to the promising potential in electronic olfactory, artificial intelligence, and internet of everything systems. However, the current neuromorphic gas-sensing systems are either realized via integration of gas detectors and neuromorphic devices or operating with three-terminal synaptic transistors at high voltages, leading to a rather high system complexity or power consumption. Herein, gas-modulated synaptic diodes with lateral structures are developed to converge sensing, processing, and storage functions into a single device. The lateral synaptic diode is based on a p-n junction of an organic semiconductor (OSC) and amorphous In-Ga-Zn-O, in which the upper OSC layer can directly interact with the gas molecules in the atmosphere. Typical synaptic behaviors triggered by ammonia, including inhibitory postsynaptic current and paired-pulse depression, are successfully demonstrated. Meanwhile, a low power consumption of 6.3 pJ per synaptic event has been achieved, which benefits from the simple device structure, the decent chemosensitivity of the OSC, and the low operation voltage. A simulated ammonia analysis in human exhaled breath is further conducted to explore the practical application of the synaptic diode. Therefore, this work provides a gas-modulated synaptic diode for circuit-compact and power-efficient artificial olfactory systems.

Heterogeneous Dynamics of Polymer Melts Exerted by Chain Loops Anchored on the Substrate: Insights from Molecular Dynamics Simulation

Understanding polymer-substrate interfacial dynamics at the molecular level is crucial for tailoring the properties of polymer ultrathin films (PUFs). Herein, through coarse-grained molecular dynamics simulation, the effect of length (N_loop) and rigidity (K_loop) of loop chains on the dynamics of linear chains is systematically explored, in which the loop chains are adsorbed on a solid substrate and the linear chains are covered on the loop chains. It is found that there is an optimal K_loop, which strongly confines the motion of the linear chains. Meanwhile, compared to increasing the rigidity of the loop chains, increasing the length of the loop chains can more effectively confine the motion of the linear chains. More interestingly, we observe that the mismatch of the length (ΔN) and rigidity (ΔK) between the loop and linear chains leads to dynamic asymmetry (ΔD_c). The relationship between the ΔN, ΔK, and ΔD_c are found to follow the mathematical expression of ΔD_c ∼ (ΔN)^α(ΔK)^β, in which the values of α and β are around 4.58 and 0.83, separately. Remarkably, using the Gaussian process regression model, we construct a master curve of diffusion coefficient on the segmental and chain length scales of the linear chains as a function of N_loop and K_loop, which is further validated by our simulated prediction. In general, this work provides a fundamental understanding of polymer interfacial dynamics at the molecular level, enlightening some rational principles for manipulating the physical properties of PUFs.

NO2-Affinitive Conjugated Polymer for Selective Sub-Parts-Per-Billion NO2 Detection in a Field-Effect Transistor Sensor

Conjugated polymers (CPs) have provided versatile semiconducting implements for the development of soft electronic devices. When three CPs with the same conjugated framework but different side chains were adopted in the field-effect transistor (FET) sensor for NO₂ detection, the response to NO₂ showed an opposite tendency to the charge carrier mobility of each CP. Morphological and structural characterizations revealed that the flexible glycol side chain enhances NO₂ affinity as well as prevents the formation of lamellar stacking of the CP chains, thereby providing routes for the facile diffusion of NO₂. Additionally, theoretical calculations for CP-NO₂ complex formation at the molecular level support the relatively low energy barrier for inter-chain transition of NO₂ between the glycol-based conjugated frameworks, which implies the spontaneous internal diffusion of NO₂ to the semiconductor-dielectric interface in the FET-based sensor. As a result, the CP with a NO₂-affinitive morphology exhibited an exceptional sensitivity of 13.8%/ppb upon NO₂ (100 ppb) exposure for 50 s and provided excellent selectivity to the FET-based sensor toward other environmentally abundant harmful gases, such as SO₂, CO₂, and NH₃. In particular, the theoretic limit of detection reached down to 0.24 ppb, which is the lowest value ever reported for organic FET-based NO₂ gas sensors.

Recent Advances of Nanospheres Lithography in Organic Electronics

Nanospheres lithography (NSL) is an economical technique, which makes use of highly monodispersed nanospheres such as deposition or etch masks for generating patterns with nanoscale features. Embedding nanostructures into organic electronic devices can endow them with unique capabilities and enhanced performance, which have greatly advanced the development of organic electronics. In this review, a brief summary of the methods for the preparation of monodispersed nanospheres is presented. Afterward, the authors highlight the recent advances of a wide variety of applications of nanospheres lithography in organic electronic devices. Finally, the challenges in this field are pointed out, and the future development of this field is discussed.

Metal-Organic Framework as a Functional Analyte Channel of Organic-Transistor-Based Air Pollution Sensors

Air pollution sensors based on organic transistors have attracted much interest recently; however, the devices suffer from low responsivity and slow response and recovery rates for gas analytes. These shortcomings are attributed to the low charge-carrier mobility of organic semiconductors and to a structural limitation resulting from the use of a thick and continuous active layer. In the present work, we investigated the material properties of a multiscale porous zeolitic imidazolate framework, [Zn(2-methylimidazole)₂]_n (ZIF-8), and examined its potential as an analyte channel material inserted at an organic-transistor active layer. A series of carbonized zeolitic imidazolate frameworks (ZIFs) were prepared by thermal conversion of ZIF-8 and also studied for comparison. The microstructures, morphologies, and optical/electrical characteristics of polythiophene/ZIF-8 hybrid films were systematically investigated. Organic-transistor-type nitrogen dioxide sensors based on the polythiophene/ZIF-8 hybrid films showed substantially improved sensing properties, including responsivity, response rate, and recovery rate. The electrical conductivity of the carbonized ZIF-8s enhanced the field-effect mobility of the organic transistors; however, the sensing performance was not improved, because of the closed pore structures resulting from the carbonization. These results provide invaluable information and useful insights into the design of transistor-type gas sensors based on organic semiconductor/metal-organic framework hybrid films.

Highly sensitive 2D organic field-effect transistors for the detection of lithium-ion battery electrolyte leakage

Lithium ion batteries (LIBs) have become indispensable in daily life. Here, we fabricated a broad range of polymer semiconductor films as thin as 2 nm via a standard spin-coating method, and utilized the resulting organic transistors for the detection of LIB electrolytes, which can give an early warning signal before LIB failure.

Mechanical design of brush coating technology for the alignment of one-dimension nanomaterials

Widespread approaches to fabricate surfaces with aligned nanostructured topographies have been stimulated by opportunities to enhance interface performance by combing physical and chemical effects, in which brush-coating technology (BCT) is a cost-effective and feasible method for aligned film and large-scale production. Here, we reported a BCT process to realize the alignment of various 1D nanostructures through mechanical design that provides a more precise and higher shear force. By regulating the viscosity of dispersion, shear force is proved to be 24 and 20.3 times larger (when the volume ratio of water and glycerol is 1:3) according to the theoretical calculation and ANSYS simulating calculation results respectively, which plays a vital role in brush coating process. The universality was demonstrated by the alignment of one-dimension nanomaterials with different diameters, including silver nanowires (~80 nm), molybdenum trioxide nanobelts (~150 nm), vanadium pentoxide nanobelts (~150 nm) and bismuth sulfide nanobelts (~200 nm), et al., which in consequence have different alignment ratios. Meanwhile, anisotropic and flexible electrical conductors (the resistance anisotropic ratio was 2) and thermoelectric films (Seebeck coefficient was calculated to be 56.7 µV/K) were demonstrated.

Highly Reliable Organic Field-Effect Transistors with Molecular Additives for a High-Performance Printed Gas Sensor

Organic semiconductors (OSCs) are promising sensing materials for printed flexible gas sensors. However, OSCs are unstable in the humid air, which limits the realization of gas sensors for multiple usages. In this paper, we report a facile and effective way to improve the air stability of an OSC film to realize multiple reversibly used printed gas sensors by adding molecular additives. The tetracyanoquinodimethane (TCNQ) or 4-aminobenzonitrile (ABN) additives effectively prevent adsorption of moisture from the air on the OSC layer, thereby providing a stable gas sensor operation. The organic field-effect transistor (OFET)-based indacenodithiophene-co-benzothiadiazole with TCNQ or ABN shows highly reliable ammonia (NH₃) gas sensing up to 10 ppm in air, with 23.14% sensitivity, and the gas sensor signal can recover up to 100%. In particular, the stability of gas detection is greatly improved by the additives, which can be performed in the air for 16 days. The result indicates that the elimination of moisture trapped in OSCs with molecule additives is critical in the improvement of device air/operational stabilities and the achievement of high-performance OFET-based gas sensors.

Cobweb-like, Ultrathin Porous Polymer Films for Ultrasensitive NO2 Detection

Gas sensors based on polymer field-effect transistors (FETs) have drawn much attention owing to the inherent merits of specific selectivity, low cost, and room temperature operation. Ultrathin (<10 nm) and porous polymer semiconductor films offer a golden opportunity for achieving high-performance gas sensors. However, wafer-scale fabrication of such high-quality polymer films is of great challenge and has rarely been realized before. Herein, the first demonstration of 4 in. wafer-scale, cobweb-like, and ultrathin porous polymer films is reported via a one-step phase-inversion process. This approach is extremely simple and universal for constructing various ultrathin porous polymer semiconductor films. Thanks to the abundant pores, ultrathin size, and high charge-transfer efficiency of the prepared polymer films, our gas sensors exhibit many superior advantages, including ultrahigh response (2.46 × 10⁶%), low limit of detection (LOD) (<1 ppm), and excellent selectivity. Thus, the proposed fabrication strategy is exceptionally promising for mass manufacturing of low-cost high-performance polymer FET-based gas sensors.

Shear Induced TiO2 Nano Structure Using Brush-Coating for Liquid Crystal Alignment

We have developed a very useful and cost-effective liquid crystal (LC) alignment layer of brush-coated TiO2 that is solution-processable for twisted nematic (TN) LC cells. TiO2 was prepared via the sol-gel method. The TiO2 solution was brush-coated on the substrate, followed by an annealing process. During the brush-coating process, a retracting force is generated on the deposited TiO solutions along the coating direction. The annealing process hardens the TiO2 and generates shearing stress arising from the retracting force along the brush-coating direction. The shearing stress created highly oriented nano/microstructure and uniformly aligned LCs with a stable pretilt angle of 0.6°. TN mode LC cells based on brush-coated TiO2 exhibited a performance of 12.5 ms of response and a threshold voltage of 1.8 V. Our brush-coated TiO2 incorporates two steps of the film deposition and alignment process into one step.

Fast deposition of an ultrathin, highly crystalline organic semiconductor film for high-performance transistors

Ultrathin organic semiconductor (OSC) crystalline films hold the promise of achieving high-performance, flexible, and transparent organic electronic devices. However, fast and high-throughput solution deposition of uniform pinhole-free ultrathin OSC crystalline films over a large area remains a challenge. Here, we demonstrate that a mixed solvent system can obviously alter the fluid flow dynamics and significantly improve the blade-coating quality of the film, enabling us to achieve a large-area continuous and smooth bis(triethylsilylethynyl)anthradithiophene (Dif-TES-ADT) ultrathin film at a fast coating speed of ∼1 mm s^-1, much superior to the 30-50 μm s^-1 for conventional methods. Also, the ultrathin, highly crystalline Dif-TES-ADT film-based organic thin-film transistors (OTFTs) exhibit a maximum mobility up to 5.54 cm² V^-1 s^-1, which is on par with the Dif-TES-ADT single crystal-based devices and among the highest for Dif-TES-ADT film-based devices. This finding should open a new route to achieve ultrathin OSC crystalline film-based high-performance flexible and transparent electronics.

Monolayer Two-dimensional Molecular Crystals for an Ultrasensitive OFET-based Chemical Sensor

The sensitivity of conventional thin-film OFET-based sensors is limited by the diffusion of analytes through bulk films and remains the central challenge in sensing technology. Now, for the first time, an ultrasensitive (sub-ppb level) sensor is reported that exploits n-type monolayer molecular crystals (MMCs) with porous two-dimensional structures. Thanks to monolayer crystal structure of NDI3HU-DTYM2 (NDI) and controlled formation of porous structure, a world-record detection limit of NH3 (0.1 ppb) was achieved. Moreover, the MMC-OFETs also enabled direct detection of solid analytes of biological amine derivatives, such as dopamine at an extremely low concentration of 500 ppb. The remarkably improved sensing performances of MMC-OFETs opens up the possibility of engineering OFETs for ultrasensitive (bio)chemical sensing.

Symmetric Mixed Sulfur-Selenium Fused Ring Systems as Potential Materials for Organic Field-Effect Transistors

A reliable synthetic protocol toward a series of fused chalcogenopheno[1]benzochalcogenophene (CBC) building blocks was developed based on a Fiesselmann reaction. The obtained CBC units were applied in McMurry and Stille coupling reactions toward symmetric regioisomeric ene-linked dimers. These π-conjugated compounds were characterized regarding their photophysical and electrochemical properties and proved to be materials with reduced HOMO-LUMO gaps compared to their sulfur-based analogues. Single-crystal X-ray diffraction experiments revealed strong intermolecular selenium-selenium and selenium-carbon interactions depending on the position and number of incorporated selenium atoms. Good field-effect transistor performance with charge carrier mobilities up to 4×10^-3  cm²  V^-1  s^-1 and high on/off ratios could be observed.

Organic field-effect transistor-based flexible sensors

Flexible transistors are the next generation sensing technology, due to multiparametric analysis, reduced complexity, biocompatibility, lightweight with tunable optoelectronic properties. We summarize multitude of applications realized with OFETs.

Solution-processed organic field-effect transistors using directed assembled carbon nanotubes and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT)

Achieving low-cost fabrication of organic field-effect transistors (OFETs) has long been pursued in the semiconductor industry. Solution-based process allows the fabrication of OFETs cost-effective because of its merit of vacuum-free and room temperature operation. Here, we show a facile and scalable fabrication of solution-processed OFETs using carbon nanotube (CNT) as source/drain electrodes and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) as semiconducting layer on silicon as well as on flexible and transparent polyethylene terephthalate (PET) substrates. The CNT electrodes and the C8-BTBT film are fabricated using a dip coating-based directed assembly process, and two dip coating parameters, the pulling speed and the solution concentration, are carefully chosen so that the thickness of the C8-BTBT film is close to that of the CNT electrodes. The fabricated OFET devices show typical p-channel behavior. Low-cost, ease of processing, wafer level scalability and good compatibility with various substrates make the fabrication process presented in this paper well suited for next-generation electronics and sensors.

The Effects of Side Chains on the Charge Mobilities and Functionalities of Semiconducting Conjugated Polymers beyond Solubilities

Recent decades have witnessed the rapid development of semiconducting polymers in terms of high charge mobilities and applications in transistors. Significant efforts have been made to develop various conjugated frameworks and linkers. However, studies are increasingly demonstrating that the side chains of semiconducting polymers can significantly affect interchain packing, thin film crystallinity, and thus semiconducting performance. Ways to modify the side alkyl chains to improve the interchain packing order and charge mobilities for conjugated polymers are first discussed. It is shown that modifying the branching chains by moving the branching points away from the backbones can boost the charge mobilities, which can also be improved through partially replacing branching chains with linear ones. Second, the effects of side chains with heteroatoms and functional groups are discussed. The siloxane-terminated side chains are utilized to enhance the semiconducting properties. The fluorinated alkyl chains are beneficial for improving both charge mobility and air stability. Incorporating H bonding group side chains can improve thin film crystallinities and boost charge mobilities. Notably, incorporating functional groups (e.g., glycol, tetrathiafulvalene, and thymine) into side chains can improve the selectivity of field-effect transistor (FET)-based sensors, while photochromic group containing side chains in conjugated polymers result in photoresponsive semiconductors and optically tunable FETs.

Selective Wet-Etching of Polymer/Fullerene Blend Films for Surface- and Nanoscale Morphology-Controlled Organic Transistors and Sensitivity-Enhanced Gas Sensors

Surface and nanoscale morphology of thin poly(3-hexylthiophene) (P3HT) films are effectively controlled by blending the polymer with a soluble derivative of fullerene, and then selectively dissolving out the fullerene from the blend films. A combination of the polymer blending with fullerene and a use of diiodooctane (DIO) as a processing additive enhances the molecular ordering of P3HT through nanoscale phase separation, compared to the pristine P3HT. In organic thin-film transistors, such morphological changes in the blend induce a positive effect on the field-effect mobility, as the mobility is ~5-7 times higher than in the pristine P3HT. Simple dipping of the blend films in butyl acetate (BA) causes a selective dissolution of the small molecular component, resulting in a rough surface with nanoscale features of P3HT films. Chemical sensors utilizing these morphological features show an enhanced sensitivity in detection of gas-phase ammonia, water, and ethanol.

Evolutionary Computation for Parameter Extraction of Organic Thin-Film Transistors Using Newly Synthesized Liquid Crystalline Nickel Phthalocyanine

In this work, the topic of the detrimental contact effects in organic thin-film transistors (OTFTs) is revisited. In this case, contact effects are considered as a tool to enhance the characterization procedures of OTFTs, achieving more accurate values for the fundamental parameters of the transistor threshold voltage, carrier mobility and on-off current ratio. The contact region is also seen as a fundamental part of the device which is sensitive to physical, chemical and fabrication variables. A compact model for OTFTs, which includes the effects of the contacts, and a recent proposal of an associated evolutionary parameter extraction procedure are reviewed. Both the model and the procedure are used to assess the effect of the annealing temperature on a nickel-1,4,8,11,15,18,22,25-octakis(hexyl)phthalocyanine (NiPc6)-based OTFT. A review of the importance of phthalocyanines in organic electronics is also provided. The characterization of the contact region in NiPc6 OTFTs complements the results extracted from other physical-chemical techniques such as differential scanning calorimetry or atomic force microscopy, in which the transition from crystal to columnar mesophase imposes a limit for the optimum performance of the annealed OTFTs.

Gas-Induced Ion-Free Stable Radical Anion Formation of Organic Semiconducting Solids as Highly Gas-Selective Probes

The formation of stabilized radical anions on organic materials in the solid state is an important issue in radical-based fundamental research and various applications. Herein, for the first time, we report on gas-induced ion-free stable radical anion formation (SRAF) of organic semiconducting solids with high gas selectivities through the use of organic field-effect transistor (OFET) gas sensors and electron spin resonance spectroscopy. In contrast to the previously reported SRAF, which requires either anionic analytes in solution and/or cationic substituents on π-electron-deficient aromatic cores, NDI-EWGs consist of an n-type semiconducting naphthalene diimide (NDI) and various electron-withdrawing groups (EWGs) that exhibit non-ion-involved, gas-selective SRAF in the solid state. In the presence of hard Lewis base gases, NDI-EWG-based OFETs exhibit enhanced conductivity (Current-ON mode) through the formation of an SRAF NDI/gas complex, while in the presence of borderline and soft Lewis base gases, NDI-EWG-based OFETs show decreased conductivity (Current-OFF mode) by the formation of a resistive NDI/gas complex. Organic semiconducting solids with EWGs exhibiting highly gas-selective solid-SRAF constitute a very promising platform for radical-based chemistry and can be used in various applications, such as highly gas-selective probes.

Repurposing DNA-binding agents as H-bonded organic semiconductors

Organic semiconductors are usually polycyclic aromatic hydrocarbons and their analogs containing heteroatom substitution. Bioinspired materials chemistry of organic electronics promises new charge transport mechanism and specific molecular recognition with biomolecules. We discover organic semiconductors from deoxyribonucleic acid topoisomerase inhibitors, featuring conjugated backbone decorated with hydrogen-bonding moieties distinct from common organic semiconductors. Using ellipticine as a model compound, we find that hydrogen bonds not only guide polymorph assembly, but are also critical to forming efficient charge transport pathways along π-conjugated planes when at a low dihedral angle by shortening the end-to-end distance of adjacent π planes. In the π-π stacking and hydrogen-bonding directions, the intrinsic, short-range hole mobilities reach as high as 6.5 cm2V-1s-1 and 4.2 cm2V-1s-1 measured by microwave conductivity, and the long-range apparent hole mobilities are up to 1.3 × 10-3 cm2V-1s-1 and 0.4 × 10-3 cm2V-1s-1 measured in field-effect transistors. We further demonstrate printed transistor devices and chemical sensors as potential applications.

An A-D-A'-D-A Conjugated Molecule Entailing Diazapentalene Unit for an n-Type Organic Semiconductor

Conjugated molecules with low lying LUMO levels are demanding for the development of air stable n-type organic semiconductors. In this paper, we report a new A-D-A'-D-A conjugated molecule (DAPDCV) entailing diazapentalene (DAP) and dicyanovinylene groups as electron accepting units. Both theoretical and electrochemical studies manifest that the incorporation of DAP unit in the conjugated molecule can effectively lower the LUMO energy level. Accordingly, thin film of DAPDCV shows n-type semiconducting behavior with electron mobility up to 0.16 cm² ⋅V^-1 ⋅s^-1 after thermal annealing under N₂ atmosphere. Moreover, thin film of DAPDCV also shows stable n-type transporting property in air with mobility reaching 0.078 cm² ⋅V^-1 ⋅s^-1 .

Tertiary Amines Differentiated from Primary and Secondary Amines by Active Ester-Functionalized Hexabenzoperylene in Field Effect Transistors

Herein, we report two novel derivatives of hexabenzoperylene (HBP) that are functionalized with ester groups. Methyl acetate functionalized HBP (1) in single crystals self-assembles into a supramolecular nanosheet, which has a two-dimensional π-stack of HBP sandwiched between two layers of ester groups. With the same self-assembly motif, active ester-functionalized HBP (2) in field effect transistors has enabled differentiation of tertiary amines from primary and secondary amines, in agreement with the fact that active ester reacts with primary and secondary amines but not with tertiary amines to form amides.

Optical Recognition of Ammonia and Amine Vapor Using "Turn-on" Fluorescent Chitosan Nanoparticles Imprinted on Cellulose Strips

A practical fluorescent test dipstick for an efficient recognition of ammonia and amines vapors was developed. The prepared testing strip was based on a composite of molecularly imprinted chitosan nanoparticles, supported on cellulose paper assay, with artificial fluorescent receptor sites for ammonia/amines recognition in aqueous and gaseous phases. A modified chitosan nanoparticles containing fluorescein molecules, were successfully prepared and employed on cellulose paper strip creating fluorescent cellulose (FL-Cell) to act as "turn-on" fluorescent sensor for sensing and determining ammonia and organic amine vapor. We employed chitosan nanoparticles that had fluorescein incorporated as the fluorescent probe molecule, with a readout limit achieved for aqueous ammonia as low as 280 ppm at room temperature and atmospheric pressure. The sensor responded linearly relying on the aqueous ammonia concentration in the range of 0.13-280 ppm. The chromogenic fluorescent cellulose platform response depended on the acid-base characteristic effects of the fluorescein probe. The protonated form of fluorescein molecules immobilized within the chitosan nanoparticles were in a nanoenvironment demonstrating only weak fluorescence. When binding to ammonia/amine vapor, the fluorescein active sites were deprotonated and exhibited higher "turned-on" fluorescence as a result of exposure to those alkaline species. The simple fabrication and abovementioned characteristics of such fluorescent chitosan nanoparticles are such that they should be applicable for monitoring of ammonia/amines in either aqueous or vapor states. We studied the distribution of the fluorescent chitosan onto paper sheets fabricated from bleached bagasse pulp and coated with two different thicknesses of a fluorescent nanochitosan and blank nanochitosan solutions. A thin fluorescent nanochitosan layer was created on the surface of cellulose strips using an applicator. Its distribution was assessed by scanning electron microscopic (SEM) and transmission electron microscopic (TEM) analysis as well as Fourier-transform infrared spectroscopic (FT-IR) measurements. The mechanical properties were also tested. The exploitation of this "turn-on" fluorescence sensor invented platform should be amenable to different situations where determination of ammonia/amine vapor or aqueous solution is required.

A Versatile Method to Enhance the Operational Current of Air-Stable Organic Gas Sensor for Monitoring of Breath Ammonia in Hemodialysis Patients

Point-of-care (POC) application for monitoring of breath ammonia (BA) in hemodialysis (HD) patients has emerged as a promising noninvasive health monitoring approach. In this context, many organic gas sensors have been reported for BA detection. However, one of the major challenges for its integration with affordable household POC application is to achieve stable performance for accuracy and high operational current at low voltage for low-cost read-out circuitry. Herein, we exploited the stability of the Donor-Acceptor polymer on the cylindrical nanopore structure to realize the sensors with a high sensitivity and stability. Then, we proposed a double active layer (DL) strategy that exploits an ultrathin layer of Poly(3-hexylthiophene-2,5-diyl) (P3HT) to serve as a work function buffer to enhance the operational current. The DL sensor exhibits a sustainable enhanced operational current of microampere level and a stable sensing response even with the presence of P3HT layer. This effect is carefully examined with different aspects, including vertical composition profile of DL configuration, lifetime testing on different sensing layer, morphological analysis, and the versatility of the DL strategy. Finally, we utilize the DL sensor to conduct a tracing of BA concentration in two HD patients before and after HD, and correlate it with the blood urea nitrogen (BUN) levels. A good correlation coefficient of 0.96 is achieved. Moreover, the feasibility of DL sensor integrated into a low-cost circuitry was also verified. The results demonstrate the potential of this DL strategy to be used to integrate organic sensor for affordable household POC devices.

Enabling Multifunctional Organic Transistors with Fine-Tuned Charge Transport

Organic field-effect transistors (OFETs) are promising candidates for many electronic applications not only because of the intrinsic features of organic semiconductors in mechanical flexibility and solution processability but also owing to their multifunctionalities promised by combined signal switching and transduction properties. In contrast to rapid developments of high performance devices, the construction of multifunctional OFETs remains challenging. A key issue is fine-tuning the charge transport by modulating electric fields that are coupled with various external stimuli. Given that the charge transport is determined by complicated factors involving material and device engineering, the development of effective strategies to manipulate charge transport is highly desired toward state-of-the-art multifunctional OFETs. In this Account, we present our recent progress on device-engineered OFETs for sensing applications and thermoelectric studies of organic semiconductors. The interactions between organic semiconductors and the target analyte determine the performance of chemical sensors based on OFETs. We introduced gas receptors and in situ tailored molecular antenna on the surface of ultrathin active layers. The engineered interfaces enable direct and specific semiconductor-analyte interactions, as demonstrated in developed chemical sensors and biosensors with prominent sensitivity and good selectivity. In comparison with chemical stimuli, many physical stimuli such as pressure typically possess a limit effect on the charge transport properties of organic semiconductors. By utilizing the suspended-gate geometry, the carrier concentration in a conductive channel can be controlled quantitatively by the pressure dominated changes in the capacitance of an air dielectric layer, allowing for ultrasensitive pressure detection in a unique manner. More importantly, the transduced current can be further processed by a synaptic OFET, in which the proton/electron coupling interfaces contribute to the dynamic modulation of carrier concentration, thus mimicking biological synapses. The integrated pressure sensor and synaptic OFETs, namely, the dual-organic-transistor-based tactile-perception element, has exhibited promising applications in artificial intelligence elements. Aiming at revealing thermoelectric (TE) properties of organic semiconductors, we also investigated field-modulated TE performance of several high-mobility semiconductors by varying the driving electric field to the temperature gradient. This has been confirmed to offer a strategy to accelerate the search for promising TE materials from well-developed organic semiconductors. By tuning the charge transport process in the device, the functional modulation of OFETs has experienced significant progress in the preceding years. The exploration of new ways to create OFETs with more fascinating functionalities is still full of opportunities to obtain greater benefit from organic transistors.

Organic crystalline materials in flexible electronics

Flexible electronics have attracted considerable attention recently given their potential to revolutionize human lives. High-performance organic crystalline materials (OCMs) are considered strong candidates for next-generation flexible electronics such as displays, image sensors, and artificial skin. They not only have great advantages in terms of flexibility, molecular diversity, low-cost, solution processability, and inherent compatibility with flexible substrates, but also show less grain boundaries with minimal defects, ensuring excellent and uniform electronic characteristics. Meanwhile, OCMs also serve as a powerful tool to probe the intrinsic electronic and mechanical properties of organics and reveal the flexible device physics for further guidance for flexible materials and device design. While the past decades have witnessed huge advances in OCM-based flexible electronics, this review is intended to provide a timely overview of this fascinating field. First, the crystal packing, charge transport, and assembly protocols of OCMs are introduced. State-of-the-art construction strategies for aligned/patterned OCM on/into flexible substrates are then discussed in detail. Following this, advanced OCM-based flexible devices and their potential applications are highlighted. Finally, future directions and opportunities for this field are proposed, in the hope of providing guidance for future research.

Gas Sensors Based on Nano/Microstructured Organic Field-Effect Transistors

Benefiting from the advantages of organic field-effect transistors (OFETs), including synthetic versatility of organic molecular design and environmental sensitivity, gas sensors based on OFETs have drawn much attention in recent years. Potential applications focus on the detection of specific gas species such as explosive, toxic gases, or volatile organic compounds (VOCs) that play vital roles in environmental monitoring, industrial manufacturing, smart health care, food security, and national defense. To achieve high sensitivity, selectivity, and ambient stability with rapid response and recovery speed, the regulation and adjustment of the nano/microstructure of the organic semiconductor (OSC) layer has proven to be an effective strategy. Here, the progress of OFET gas sensors with nano/microstructure is selectively presented. Devices based on OSC films one dimensional (1D) single crystal nanowires, nanorods, and nanofibers are introduced. Then, devices based on two dimensional (2D) and ultrathin OSC films, fabricated by methods such as thermal evaporation, dip-coating, spin-coating, and solution-shearing methods are presented, followed by an introduction of porous OFET sensors. Additionally, the applications of nanostructured receptors in OFET sensors are given. Finally, an outlook in view of the current research state is presented and eight further challenges for gas sensors based on OFETs are suggested.

The Semiconductor/Conductor Interface Piezoresistive Effect in an Organic Transistor for Highly Sensitive Pressure Sensors

The piezoresistive pressure sensor, a kind of widely investigated artificial device to transfer force stimuli to electrical signals, generally consists of one or more kinds of conducting materials. Here, a highly sensitive pressure sensor based on the semiconductor/conductor interface piezoresistive effect is successfully demonstrated by using organic transistor geometry. Because of the efficient combination of the piezoresistive effect and field-effect modulation in a single sensor, this pressure sensor shows excellent performance, such as high sensitivity (514 kPa^-1 ), low limit of detection, short response and recovery time, and robust stability. More importantly, the unique gate modulation effect in the transistor endows the sensor with an unparalleled ability-tunable sensitivity via bias conditions in a single sensor, which is of great significance for applications in complex pressure environments. The novel working principle and high performance represent significant progress in the field of pressure sensors.