Solvent additive effects on small molecule crystallization in bulk heterojunction solar cells probed during spin casting

High-Performance Wearable Organic Photodetectors by Molecular Design and Green Solvent Processing for Pulse Oximetry and Photoplethysmography

White-light detection from the visible to the near-infrared region is central to many applications such as high-speed cameras, autonomous vehicles, and wearable electronics. While organic photodetectors (OPDs) are being developed for such applications, several challenges must be overcome to produce scalable high-detectivity OPDs. This includes issues associated with low responsivity, narrow absorption range, and environmentally friendly device fabrication. Here, an OPD system processed from 2-methyltetrahydrofuran (2-MeTHF) sets a record in light detectivity, which is also comparable with commercially available silicon-based photodiodes is reported. The newly designed OPD is employed in wearable devices to monitor heart rate and blood oxygen saturation using a flexible OPD-based finger pulse oximeter. In achieving this, a framework for a detailed understanding of the structure-processing-property relationship in these OPDs is also developed. The bulk heterojunction (BHJ) thin films processed from 2-MeTHF are characterized at different length scales with advanced techniques. The BHJ morphology exhibits optimal intermixing and phase separation of donor and acceptor moieties, which facilitates the charge generation and collection process. Benefitting from high charge carrier mobilities and a low shunt leakage current, the newly developed OPD exhibits a specific detectivity of above 1012  Jones over 400-900 nm, which is higher than those of reference devices processed from chlorobenzene and ortho-xylene.

Additive-free molecular acceptor organic solar cells processed from a biorenewable solvent approaching 15% efficiency

We report on the use of molecular acceptors (MAs) and donor polymers processed with a biomass-derived solvent (2-methyltetrahydrofuran, 2-MeTHF) to facilitate bulk heterojunction (BHJ) organic photovoltaics (OPVs) with power conversion efficiency (PCE) approaching 15%. Our approach makes use of two newly designed donor polymers with an opened ring unit in their structures along with three molecular acceptors (MAs) where the backbone and sidechain were engineered to enhance the processability of BHJ OPVs using 2-MeTHF, as evaluated by an analysis of donor-acceptor (D-A) miscibility and interaction parameters. To understand the differences in the PCE values that ranged from 9-15% as a function of composition, the surface, bulk, and interfacial BHJ morphologies were characterized at different length scales using atomic force microscopy, grazing-incidence wide-angle X-ray scattering, resonant soft X-ray scattering, X-ray photoelectron spectroscopy, and 2D solid-state nuclear magnetic resonance spectroscopy. Our results indicate that the favorable D-A intermixing that occurs in the best performing BHJ film with an average domain size of ∼25 nm, high domain purity, uniform distribution and enhanced local packing interactions - facilitates charge generation and extraction while limiting the trap-assisted recombination process in the device, leading to high effective mobility and good performance.

Compact sample environment for in situ X-ray scattering during spin-coating

We demonstrate a compact sample environment for the in situ study of crystallization kinetics of thin films on synchrotron beamlines, featuring atmospheric control, automated deposition, spin-coating, and annealing stages. The setup is suitable for studying thin film growth in real time using grazing-incidence X-ray diffraction techniques. Humidity and oxygen levels are being detected by sensors. The spinning stage exhibits low vertical oscillation amplitude (∼3μm at speeds up to 10 000 rpm) and can optionally be employed for antisolvent application or gas quenching to investigate the impact of these techniques, which are often used to assist thin film growth. Differential reflectance spectroscopy is implemented in the spin-coater environment for inspecting thin film thickness and optical properties. The infrared radiation-based annealing system consists of a halogen lamp and a holder with an adjustable lamp-to-sample distance, while the sample surface temperature is monitored by a pyrometer. All features of the sample environment can be controlled remotely by the control software at synchrotron beamlines. In order to test and demonstrate the performance, the crystallization pathway of the antisolvent-assisted MAPbI3 (MA = methylammonium) perovskite thin film during the spinning and annealing stages is monitored and discussed.

Crystallinity and Molecular Packing of Small Molecules in Bulk-Heterojunction Organic Solar Cells

Crystallinity has played a major role in organic solar cells (OSCs). In small molecule (SM) bulk-heterojunction (BHJ) OSCs, the crystallinity and crystalline packing of SM donors have been shown to have a dramatic impact on the formation of an optimum microstructure leading to high-power conversion efficiency (PCE). Herein we describe how crystallinity differs from polymers to SMs, and how the packing habits of SMs (particularly donors) in active layers of BHJ devices can be described as following two different main modes: a single crystal-like and a liquid crystal-like packing type. This notion is reviewed from a chronological perspective, emphasising milestone donor structures and studies focusing on the crystallinity in SM-BHJ OSCs. This review intends to demonstrate that a shift towards a liquid crystalline-like packing can be identified throughout the history of SM-BHJ, and that this shift can be associated with an increase in overall PCE.

Recent Advances of Furan and Its Derivatives Based Semiconductor Materials for Organic Photovoltaics

The state-of-the-art bulk-heterojunction (BHJ)-type organic solar cells (OSCs) have exhibited power conversion efficiencies (PCEs) of exceeding 18%. Thereinto, thiophene and its fused-ring derivatives play significant roles in facilitating the development of OSCs due to their excellent semiconducting natures. Furan as thiophene analogue, is a ubiquitous motif in naturally occurring organic compounds. Driven by the advantages of furan, such as less steric hindrance, good solubility, excellent stacking, strong rigidity and fluorescence, biomass derived fractions, more and more research groups focus on the furan-based materials for using in OSCs in the past decade. To systematically understand the developments of furan-based photovoltaic materials, the relationships between the molecular structures, optoelectronic properties, and photovoltaic performances for the furan-based semiconductor materials including single furan, benzofuran, benzodifuran (BDF) (containing thienobenzofuran (TBF)), naphthodifurans (NDF), and polycyclic furan are summarized. Finally, the empirical regularities and perspectives of the development of this kind of new organic semiconductor materials are extracted.

Role of Torsional Flexibility in the Film Formation Process in Two π-Conjugated Model Oligomers

The performance of solution-processed organic semiconductor devices is heavily influenced by the morphology of the active layer. Film formation is a complex process, with the final morphology being the result of the interplay between processing parameters and molecular properties, which is only poorly understood. Here, we investigate the influence of molecular stiffness by using two model oligomers, TT and CT, which differ only in the rotational flexibility of their central building block. We monitor absorption and emission simultaneously in situ during spin coating. We find that film formation takes place in four similar stages for both compounds. However, the time scales are remarkably different during the third stage, where electronically interacting aggregates are created. While this process is fast for the stiff CT, it takes minutes for the flexible TT. By comparing with previously determined aggregation properties in solution, we conclude that even though aggregate formation concurs with a planarization process, a certain amount of backbone flexibility is beneficial for establishing ordered structures during film formation. Here, the elongated time window in the case of the flexible compound can further allow for better processing control.

Role of Alkali-Metal Cations in Electronic Structure and Halide Segregation of Hybrid Perovskites

The ability to control or prevent phase segregation in perovskites is crucial to realizing stable and tunable mixed-halide optoelectronic devices. In this work, we systematically examine the impact of alkali-metal-cation (Cs⁺ and K⁺) concentration on the band structure, chemical composition, phase segregation, and polycrystalline microstructure on formamidinium-dominated mixed-halide mixed-cation perovskite films. It was found that the incorporation of Cs⁺ and K⁺ cations decreases the work function and the core levels of all components shift toward higher binding energy consistent with n-doping the perovskite film, which facilitates electron transfer to the electron transport layer TiO₂. A concentration-dependent film structure was observed by X-ray photoemission spectroscopy and grazing incidence wide-angle X-ray scattering where the halides and cations are distributed evenly across perovskite films at low metallic cation concentration (5%). A high metal-cation ratio (20%) leads to halide segregation within the perovskite film and the surface becomes bromide-poor, whereas the bromide and metal cations diffuse more deeply within the film. These differences in electronic properties, element distribution, and film morphology were reflected in the device performance where the power conversion efficiency of low-metallic-cation concentration (5% of Cs⁺ and K⁺) perovskite solar cells is ≈5% higher than the high-concentration ones (20%). This study provides valuable chemical and physical insight into the underlying trade-offs in the careful tuning of electrical properties and film structure to optimize multication and mixed-halide hybrid perovskites.

Highly Efficient All-Small-Molecule Organic Solar Cells with Appropriate Active Layer Morphology by Side Chain Engineering of Donor Molecules and Thermal Annealing

It is very important to fine-tune the nanoscale morphology of donor:acceptor blend active layers for improving the photovoltaic performance of all-small-molecule organic solar cells (SM-OSCs). In this work, two new small molecule donor materials are synthesized with different substituents on their thiophene conjugated side chains, including SM1-S with alkylthio and SM1-F with fluorine and alkyl substituents, and the previously reported donor molecule SM1 with an alkyl substituent, for investigating the effect of different conjugated side chains on the molecular aggregation and the photophysical, and photovoltaic properties of the donor molecules. As a result, an SM1-F-based SM-OSC with Y6 as the acceptor, and with thermal annealing (TA) at 120 °C for 10 min, demonstrates the highest power conversion efficiency value of 14.07%, which is one of the best values for SM-OSCs reported so far. Besides, these results also reveal that different side chains of the small molecules can distinctly influence the crystallinity characteristics and aggregation features, and TA treatment can effectively fine-tune the phase separation to form suitable donor-acceptor interpenetrating networks, which is beneficial for exciton dissociation and charge transportation, leading to highly efficient photovoltaic performance.

Vibrational exciton nanoimaging of phases and domains in porphyrin nanocrystals

Much of the electronic transport, photophysical, or biological functions of molecular materials emerge from intermolecular interactions and associated nanoscale structure and morphology. However, competing phases, defects, and disorder give rise to confinement and many-body localization of the associated wavefunction, disturbing the performance of the material. Here, we employ vibrational excitons as a sensitive local probe of intermolecular coupling in hyperspectral infrared scattering scanning near-field optical microscopy (IR s-SNOM) with complementary small-angle X-ray scattering to map multiscale structure from molecular coupling to long-range order. In the model organic electronic material octaethyl porphyrin ruthenium(II) carbonyl (RuOEP), we observe the evolution of competing ordered and disordered phases, in nucleation, growth, and ripening of porphyrin nanocrystals. From measurement of vibrational exciton delocalization, we identify coexistence of ordered and disordered phases in RuOEP that extend down to the molecular scale. Even when reaching a high degree of macroscopic crystallinity, identify significant local disorder with correlation lengths of only a few nanometers. This minimally invasive approach of vibrational exciton nanospectroscopy and -imaging is generally applicable to provide the molecular-level insight into photoresponse and energy transport in organic photovoltaics, electronics, or proteins.

17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS

The application of liquid-exfoliated 2D transition metal disulfides (TMDs) as the hole transport layers (HTLs) in nonfullerene-based organic solar cells is reported. It is shown that solution processing of few-layer WS₂ or MoS₂ suspensions directly onto transparent indium tin oxide (ITO) electrodes changes their work function without the need for any further treatment. HTLs comprising WS₂ are found to exhibit higher uniformity on ITO than those of MoS₂ and consistently yield solar cells with superior power conversion efficiency (PCE), improved fill factor (FF), enhanced short-circuit current (J_SC ), and lower series resistance than devices based on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and MoS₂ . Cells based on the ternary bulk-heterojunction PBDB-T-2F:Y6:PC₇₁ BM with WS₂ as the HTL exhibit the highest PCE of 17%, with an FF of 78%, open-circuit voltage of 0.84 V, and a J_SC of 26 mA cm^-2 . Analysis of the cells' optical and carrier recombination characteristics indicates that the enhanced performance is most likely attributed to a combination of favorable photonic structure and reduced bimolecular recombination losses in WS₂ -based cells. The achieved PCE is the highest reported to date for organic solar cells comprised of 2D charge transport interlayers and highlights the potential of TMDs as inexpensive HTLs for high-efficiency organic photovoltaics.

Inhibiting or Accelerating Crystallization of Pharmaceuticals by Manipulating Polymer Solubility

Polymers play a central role in controlling the crystallization of pharmaceuticals with effects as divergent as amorphous form stabilization and the acceleration of crystallization. Here, using pyrazinamide and hydrochlorothiazide as model pharmaceuticals, it is demonstrated that the same functional group interactions are responsible for these opposing behaviors and that whether a polymer speeds or slows a crystallization can be controlled by polymer solubility. This concept is applied for the discovery of polymers to maintain drug supersaturation in solution: the strength of functional group interactions between drug and polymer is assessed through polymer-induced heteronucleation, and soluble polymers containing the strongest-interacting functional groups with drug are shown to succeed as precipitation inhibitors.

From PCBM-Polymer to Low-Cost and Thermally Stable C60/C70-Polymer Solar Cells: The Role of Molecular Structure, Crystallinity, and Morphology Control

The adoption of neat-fullerene (C60 and C70) in polymer solar cells offers opportunities to develop cost-effective and thermally stable devices. Here, through rational side-chain engineering of low optical-gap polymer poly(benzodithiophene-furan-diketopyrrolopyrrole)s (PBDs), we demonstrated for the first time a polymer/C70 blend exhibited higher efficiency (best 6.1%) compare to their polymer/[70]PCBM (best 5.7%) counterparts, and the best efficiency is at the front of efficient polymer/neat-fullerene solar cells. More importantly, we first demonstrated the morphology optimization methodology for solution-processed polymer/neat-fullerene blends in order to reduce the strong crystallization and aggregation of neat-fullerene molecules. In comparison with previous work, these results can provide not only material design strategy but also fundamental difference between polymer/neat-fullerene and polymer/PCBM blend morphology, which allow us better understanding of how to choose proper materials and optimize blend morphology in polymer/neat-fullerene based device to deliver higher photovoltaic performance.

Recent Advances in Morphology Optimization for Organic Photovoltaics

Organic photovoltaics are an important part of a next-generation energy-harvesting technology that uses a practically infinite pollutant-free energy source. They have the advantages of light weight, solution processability, cheap materials, low production cost, and deformability. However, to date, the moderate photovoltaic efficiencies and poor stabilities of organic photovoltaics impede their use as replacements for inorganic photovoltaics. Recent developments in bulk-heterojunction organic photovoltaics mean that they have almost reached the lower efficiency limit for feasible commercialization. In this review article, the recent understanding of the ideal bulk-heterojunction morphology of the photoactive layer for efficient exciton dissociation and charge transport is described, and recent attempts as well as early-stage trials to realize this ideal morphology are discussed systematically from a morphological viewpoint. The various approaches to optimizing morphologies consisting of an interpenetrating bicontinuous network with appropriate domain sizes and mixed regions are categorized, and in each category, the recent trends in the morphology control on the multilength scale are highlighted and discussed in detail. This review article concludes by identifying the remaining challenges for the control of active layer morphologies and by providing perspectives toward real application and commercialization of organic photovoltaics.

Solvent Additives: Key Morphology-Directing Agents for Solution-Processed Organic Solar Cells

Organic photovoltaics (OPV) have the advantage of possible fabrication by energy-efficient and cost-effective deposition methods, such as solution processing. Solvent additives can provide fine control of the active layer morphology of OPVs by influencing film formation during solution processing. As such, solvent additives form a versatile method of experimental control for improving organic solar cell device performance. This review provides a brief history of solution-processed bulk heterojunction OPVs and the advent of solvent additives, putting them into context with other methods available for morphology control. It presents the current understanding of how solvent additives impact various mechanisms of phase separation, enabled by recent advances in in situ morphology characterization. Indeed, understanding solvent additives' effects on film formation has allowed them to be applied and combined effectively and synergistically to boost OPV performance. Their success as a morphology control strategy has also prompted the use of solvent additives in related organic semiconductor technologies. Finally, the role of solvent additives in the development of next-generation OPV active layers is discussed. Despite concerns over their environmental toxicity and role in device instability, solvent additives remain relevant morphological directing agents as research interests evolve toward nonfullerene acceptors, ternary blends, and environmentally sustainable solvents.

Structural determinants in the bulk heterojunction

Photovoltaics is one of the key areas in renewable energy research with remarkable progress made every year. Here we consider the case of a photoactive material and study its structural composition and the resulting consequences for the fundamental processes driving solar energy conversion. A multiscale approach is used to characterize essential molecular properties of the light-absorbing layer. A selection of bulk-representative pairs of donor/acceptor molecules is extracted from the molecular dynamics simulation of the bulk heterojunction and analyzed at increasing levels of detail. Significantly increased ground state energies together with an array of additional structural characteristics are identified that all point towards an auxiliary role of the material's structural organization in mediating charge-transfer and -separation. Mechanistic studies of the type presented here can provide important insights into fundamental principles governing solar energy conversion in next-generation photovoltaic devices.

In Situ GIWAXS Analysis of Solvent and Additive Effects on PTB7 Thin Film Microstructure Evolution during Spin Coating

The influence of solvent and processing additives on the pathways and rates of crystalline morphology formation for spin-coated semiconducting PTB7 (poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)-carbonyl]-thieno[3,4-b]thiophenediyl]]) thin films is investigated by in situ grazing incidence wide-angle X-ray scattering (GIWAXS) and optical reflectance, to better understand polymer solar cell (PSC) optimization approaches. In situ characterization of PTB7 film formation from chloroform (CF), chlorobenzene (CB), and 1,2-dichlorobenzene (DCB) solutions, as well as CB solutions with 1% and 3% v/v of the processing additives 1-chloronapthalene (CN), diphenylether (DPE), and 1,8-diiodooctane (DIO), reveals multiple crystallization pathways with: (i) single-solvent systems exhibiting rapid (<3 s) crystallization after a solvent boiling point-dependent film thinning transition, (ii) solvent + additive systems exhibiting different crystallization pathways and crystallite formation times from minutes (CN, DPE) to 1.5 h (DIO). Identifying crystalline intermediates has implications for bulk-heterojunction PSC morphology optimization via optimized spin-casting processes.

Understanding the Limiting Factors of Solvent-Annealed Small-Molecule Bulk-Heterojunction Organic Solar Cells from a Chemical Perspective

A detailed account of the limiting factors of solvent-annealed bulk-heterojunction small-molecule organic solar cells is given. This account is based on the extensive characterisation of solar cell devices made from a library of five diketopyrolopyrole (DPP) donor dyes. Their chemical structure is designed in such a way as to provide insights into the energetics of solar cell active layer micro-structure formation. Numerous chemical and physical properties of the active layers are assessed and inter-related such as light absorption, molecular packing in the solid state, crystal-forming properties in thin films, charge carrier mobility and charge carrier recombination kinetics. A myriad of characterisation techniques are used such as UV/Vis absorption spectroscopy, photoluminescence spectroscopy, XRD, AFM and photo-induced transient measurements, which provide information on the optical properties of the active layers, morphology and recombination kinetics. Consequently, a mechanism for the solvent-vapour-annealing-assisted formation of crystalline domains of donor molecules in the active layer is proposed, and the micro-structural features are related to the J-V characteristics of the devices. According to this model, the crystalline phase in which the donor crystallise in the active layer is the key determinant to direct the formation of the micro-structure.

Reduced Bimolecular Recombination in Blade-Coated, High-Efficiency, Small-Molecule Solar Cells

To realize the full promise of solution deposited photovoltaic devices requires processes compatible with high-speed manufacturing. We report the performance and morphology of blade-coated bulk heterojunction devices based on the small molecule donor p-DTS(FBTTh2)2 when treated with a post-deposition solvent vapor annealing (SVA) process. SVA with tetrahydrofuran improves the device performance of blade-coated films more than solvent additive processing (SA) with 1,8-diiodooctane. In spin-coating, SA and SVA achieve similar device performance. Our optimized, blade coated, SVA devices achieve power conversion efficiencies over 8 % and maintain high efficiencies in films up to ≈ 250 nm thickness, providing valuable resilience to small process variations in high-speed manufacturing. Using impedance spectroscopy, we show that this advantageous behavior originates from highly suppressed bimolecular recombination in the SVA-treated films. Electron microscopy and grazing-incidence X-ray scattering experiments show that SA and SVA both produce highly crystalline donor domains, but SVA films have a radically smaller domain size compared to SA films. We attribute the different behavior to variations in initial nucleation density and relative ability of SVA and SA to control subsequent crystal growth.

Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells

Technological deployment of organic photovoltaic modules requires improvements in device light-conversion efficiency and stability while keeping material costs low. Here we demonstrate highly efficient and stable solar cells using a ternary approach, wherein two non-fullerene acceptors are combined with both a scalable and affordable donor polymer, poly(3-hexylthiophene) (P3HT), and a high-efficiency, low-bandgap polymer in a single-layer bulk-heterojunction device. The addition of a strongly absorbing small molecule acceptor into a P3HT-based non-fullerene blend increases the device efficiency up to 7.7 ± 0.1% without any solvent additives. The improvement is assigned to changes in microstructure that reduce charge recombination and increase the photovoltage, and to improved light harvesting across the visible region. The stability of P3HT-based devices in ambient conditions is also significantly improved relative to polymer:fullerene devices. Combined with a low-bandgap donor polymer (PBDTTT-EFT, also known as PCE10), the two mixed acceptors also lead to solar cells with 11.0 ± 0.4% efficiency and a high open-circuit voltage of 1.03 ± 0.01 V.

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization

Polymer-based materials hold promise as low-cost, flexible efficient photovoltaic devices. Most laboratory efforts to achieve high performance devices have used devices prepared by spin coating, a process that is not amenable to large-scale fabrication. This mismatch in device fabrication makes it difficult to translate quantitative results obtained in the laboratory to the commercial level, making optimization difficult. Using a mini-slot die coater, this mismatch can be resolved by translating the commercial process to the laboratory and characterizing the structure formation in the active layer of the device in real time and in situ as films are coated onto a substrate. The evolution of the morphology was characterized under different conditions, allowing us to propose a mechanism by which the structures form and grow. This mini-slot die coater offers a simple, convenient, material efficient route by which the morphology in the active layer can be optimized under industrially relevant conditions. The goal of this protocol is to show experimental details of how a solar cell device is fabricated using a mini-slot die coater and technical details of running in situ structure characterization using the mini-slot die coater.

Dithienobenzodithiophene-Based Small Molecule Organic Solar Cells with over 7% Efficiency via Additive- and Thermal-Annealing-Free Processing

Here we introduce a novel small molecule based on dithienobenzodithiophene and rhodanine, DTBDT-Rho, developed to study the effect of the rhodanine substitutuent on small molecule bulk heterojunction (BHJ) solar cells. DTBDT-Rho possesses distinct crystalline characteristics, sufficient solubility in chlorinated solvents, and broad absorption properties. Therefore, solution-processed BHJ photovoltaic cells made with DTBDT-Rho:PC₇₁BM blends showed an extremely high power conversion efficiency (PCE; 7.10%); notably, this PCE value was obtained without the use of additives or thermal treatments. To our knowledge, the PCE over 7% is a significantly powerful value among rhodanine-based small molecule BHJ solar cells without additives or thermal treatments.

Effectiveness of External Electric Field Treatment of Conjugated Polymers in Bulk-Heterojunction Solar Cells

External electric field treatment (EFT) on P3HT:PCBM bulk heterojunction (BHJ) devices was recently found to be a viable approach for improving the power conversion efficiencies (PCEs) through modulating the blend nanomorphology. However, its effectiveness over the broad family of polymer-fullerene blends remains unclear. Herein, we investigate the effects of external EFT on various polymer-fullerene blends with distinct morphologies stemming from the difference in molecular structure of the polymers (i.e., semicrystalline vs amorphous) in a bid to establish a clear morphology-function-charge dynamics relationship to the photovoltaic performance. Our findings reveal that EFT promotes self-organization of the semicrystalline thiophene-based conjugated polymers (i.e., P3HT and P3BT) while it was ineffective for the amorphous polymers (i.e., PTB7 and PCPDTBT) even at the maximum applied E-field of 8 kV cm^-1. Transient absorption spectroscopy shows an improvement in the initial charge-carrier and polaron formation from delocalized excitons in the E-field treated semicrystalline blends compared to their untreated reference samples. Interfacial trap-assisted monomolecular and trap-free bimolecular recombination at nanosecond-microsecond time scale in the E-field treated P3BT:PC60BM devices are significantly suppressed. Importantly, our findings shed new light and provide guidelines on the effectiveness of utilizing external EFT to enhance the PCEs of a larger family of conjugated polymer-based BHJ OSCs.

Effects of solvent additive on "s-shaped" curves in solution-processed small molecule solar cells

A novel molecular chromophore, p-SIDT(FBTThCA8)₂, is introduced as an electron-donor material for bulk heterojunction (BHJ) solar cells with broad absorption and near ideal energy levels for the use in combination with common acceptor materials. It is found that films cast from chlorobenzene yield devices with strongly s-shaped current-voltage curves, drastically limiting performance. We find that addition of the common solvent additive diiodooctane, in addition to facilitating crystallization, leads to improved vertical phase separation. This yields much better performing devices, with improved curve shape, demonstrating the importance of morphology control in BHJ devices and improving the understanding of the role of solvent additives.

Highly Efficient Fullerene-Free Polymer Solar Cells Fabricated with Polythiophene Derivative

A highly efficient fullerene-free polymer solar cell (PSC) based on PDCBT, a polythiophene derivative substituted with alkoxycarbonyl, achieves an impressive power conversion efficiency of 10.16%, which is the best result in PSCs based on polythiophene derivatives to date. In comparison with a poly(3-hexylthiophene):ITIC-based device, the photovoltaic and morphological properties of the PDCBT:ITIC-based device are carefully investigated and interpreted.

Film morphology evolution during solvent vapor annealing of highly efficient small molecule donor/acceptor blends

Solution-processable small molecule photovoltaics based on the novel molecular donor, benzodithiophene terthiophene rhodanine (BTR), recently have shown maximum power conversion efficiencies above 8 % for active layer thicknesses up to 400 nm, using post process solvent vapor annealing (SVA) with tetrahydrofuran (THF). Here we report an in-situ study on the morphology evolution during SVA using the moderate solvent THF and the good solvent chloroform (CF). The combination of real-time grazing incidence X-ray diffraction (GIXD) and grazing incidence small angle X-ray scattering (GISAXS) allows us to draw a complete picture of the evolution of crystallinity and phase purity during post process annealing. We find that the relative crystallinity compared to the as-cast films is only modestly affected by SVA and solvent choice. However, both the phase purity and the characteristic domain sizes within the film vary significantly and are controlled by the solvent quality as well as exposure time. Using THF, films with high phase purity and desirable characteristic length scales of about 30 nm can be achieved, while the use of CF rapidly leads to excessive film coarsening and less preferable domain sizes on the order of 60 nm, too large for optimized charge separation.

Unraveling the Fundamental Mechanisms of Solvent-Additive-Induced Optimization of Power Conversion Efficiencies in Organic Photovoltaic Devices

The realization of controllable morphologies of bulk heterojunctions (BHJ) in organic photovoltaics (OPVs) is one of the key factors enabling high-efficiency devices. We provide new insights into the fundamental mechanisms essential for the optimization of power conversion efficiencies (PCEs) with additive processing to PBDTTT-CF:PC71BM system. We have studied the underlying mechanisms by monitoring the 3D nanostructural modifications in BHJs and correlated the modifications with the optical analysis and theoretical modeling of charge transport. Our results demonstrate profound effects of diiodooctane (DIO) on morphology and charge transport in the active layers. For small amounts of DIO (<3 vol %), DIO promotes the formation of a well-mixed donor-acceptor compact film and augments charge transfer and PCE. In contrast, for large amounts of DIO (>3 vol %), DIO facilitates a loosely packed mixed morphology with large clusters of PC71BM, leading to deterioration in PCE. Theoretical modeling of charge transport reveals that DIO increases the mobility of electrons and holes (the charge carriers) by affecting the energetic disorder and electric field dependence of the mobility. Our findings show the implications of phase separation and carrier transport pathways to achieve optimal device performances.

Mechanical Properties of Solution-Processed Small-Molecule Semiconductor Films

Advantages of semiconducting small molecules-as opposed to semiconducting polymers-include synthetic simplicity, monodispersity, low cost, and ease of purification. One purported disadvantage of small-molecule films is reduced mechanical robustness. This paper measures the tensile modulus and crack-onset strain for pure films of the high-performance solution-processable small-molecule donors 7,7'-[4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl]bis[6-fluoro-4-(5'-hexyl-[2,2'-bithiophen]-5-yl)benzo[c][1,2,5]thiadiazole] (DTS(FBTTh2)2), 2,5-di(2-ethylhexyl)-3,6-bis(5″-n-hexyl-[2,2',5',2″]terthiophen-5-yl)-pyrrolo[3,4-c]pyrrole-1,4-dione (SMDPPEH), and 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene), the acceptor 5,5'-(2,1,3-benzothiadiazole-4,7-diyldi-2,1-ethenediyl)bis[2-hexyl-1H-isoindole-1,3(2H)-dione] (HPI-BT), blends of DTS(FBTTh2)2 and SMDPPEH with [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) and with HPI-BT, and bulk heterojunction films processed with the additives 1,8-diiodooctane (DIO) and polystyrene (PS). The most deformable films of solution-processed organic semiconductors are found to exhibit tensile moduli and crack-onset strains comparable to those measured for conjugated polymers. For example, the tensile modulus of as-cast DTS(FBTTh2)2 is 0.68 GPa (i.e., comparable to poly(3-hexylthiophene) (P3HT), the common polymer), while it exhibits no cracks when stretched on an elastomeric substrate to strains of 14%. While this high degree of stretchability is lost upon the addition of PC71BM (4.2 GPa, 1.42%), it can be partially recovered using processing additives. Tensile modulus and crack-onset strain are highly correlated, which is typical of van der Waals solids. Increased surface roughness was correlated to increased modulus and brittleness within films of similar composition. Decreased stiffness for soluble molecular semiconductors can be rationalized by the presence of alkyl side chains, which decrease the van der Waals attraction between molecules in the crystalline grains. These measurements and observations could have important consequences for the stability of devices based on molecular semiconductors, especially those destined for stretchable or ultraflexible applications, or those demanding mechanical robustness during roll-to-roll fabrication or use in the outdoor environment.

Integrated Effects of Two Additives on the Enhanced Performance of PTB7:PC71BM Polymer Solar Cells

Organic photovoltaics (OPVs) are fabricated with blended active layers of poly [[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno[3,4-b]thiophenediyl]]: [6,6]-phenylC71-butyric acid methyl ester (PTB7:PC71BM). The active layers are prepared in chlorobenzene (CB) added different additives of 1, 8-Diiodooctane (DIO) and polystyrene (PS) with different concentrations by spin coating. A small addition, 0.5%-5% by weight relative to the BHJ components, of inert high molecular weight PS is used to increase the solution viscosity and film thickness without sacrificing desirable phase separation and structural order. The effects of the PS are studied with respect of photovoltaic parameters such as fill factor, short circuit current density, and power conversion efficiency. Together with DIO, the device with 3.0 v% DIO and 1 wt % PS shows a high power conversion efficiency (PCE) of 8.92% along with an open-circuit voltage (Voc) of 0.76 V, a short-circuit current (Jsc) of 16.37 mA/cm², and a fill factor (FF) of 71.68%. The absorption and surface morphology of the active layers are investigated by UV-visible spectroscopy, atomic force microscopy (AFM) respectively. The positive effect of DIO and PS additives on the performance of the OPVs is attributed to the increased absorption and the charge carrier transport and collection.

Two new fluorinated copolymers based on thieno[2,3-f]benzofuran for efficient polymer solar cells

Two new copolymers named TBFPF-BT and TBFPF-BO, composed of a fluorine substituted thieno[2,3-f]benzofuran donor unit and benzothiadiazole/benzooxadiazole acceptor unit, were synthesized for photovoltaic applications.

Probing Charge Transfer and Hot Carrier Dynamics in Organic Solar Cells with Terahertz Spectroscopy

Time-resolved terahertz spectroscopy (TRTS) was used to explore charge generation, transfer, and the role of hot carriers in organic solar cell materials. Two model molecular photovoltaic systems were investigated: with zinc phthalocyanine (ZnPc) or alpha-sexathiophene (α-6T) as the electron donors and buckminsterfullerene (C₆₀) as the electron acceptor. TRTS provides charge carrier conductivity dynamics comprised of changes in both population and mobility. By using time-resolved optical spectroscopy in conjunction with TRTS, these two contributions can be disentangled. The sub-picosecond photo-induced conductivity decay dynamics of C₆₀ were revealed to be caused by auto-ionization: the intrinsic process by which charge is generated in molecular solids. In donor-acceptor blends, the long-lived photo-induced conductivity is used for weight fraction optimization of the constituents. In nanoscale multilayer films, the photo-induced conductivity identifies optimal layer thicknesses. In films of ZnPc/C₆₀, electron transfer from ZnPc yields hot charges that localize and become less mobile as they thermalize. Excitation of high-lying Franck Condon states in C₆₀ followed by hole-transfer to ZnPc similarly produces hot charge carriers that self-localize; charge transfer clearly precedes carrier cooling. This picture is contrasted to charge transfer in α-6T/C₆₀, where hole transfer takes place from a thermalized state and produces equilibrium carriers that do not show characteristic signs of cooling and self-localization. These results illustrate the value of terahertz spectroscopic methods for probing charge transfer reactions.

Surface treatment by binary solvents induces the crystallization of a small molecular donor for enhanced photovoltaic performance

The surface treatment of p-DTS(FBTTh₂)₂:PC₇₁BM films with binary solvents of methanol and 1-chloronaphthalene enhanced the PCE from 2.4% to 6.5%.

Toward Additive-Free Small-Molecule Organic Solar Cells: Roles of the Donor Crystallization Pathway and Dynamics

The ease with which small-molecule donors crystallize during solution processing is directly linked to the need for solvent additives. Donor molecules that get trapped in disordered (H1) or liquid crystalline (T1) mesophases require additive processing to promote crystallization, phase separation, and efficient light harvesting. A donor material (X2) that crystallizes directly from solution yields additive-free solar cells with an efficiency of 7.6%.

Morphology and Performance of Polymer Solar Cell Characterized by DPD Simulation and Graph Theory

The morphology of active layers in the bulk heterojunction (BHJ) solar cells is critical to the performance of organic photovoltaics (OPV). Currently, there is limited information for the morphology from transmission electron microscopy (TEM) techniques. Meanwhile, there are limited approaches to predict the morphology /efficiency of OPV. Here we use Dissipative Particle Dynamics (DPD) to determine 3D morphology of BHJ solar cells and show DPD to be an efficient approach to predict the 3D morphology. Based on the 3D morphology, we estimate the performance indicator of BHJ solar cells by using graph theory. Specifically, we study poly (3-hexylthiophene)/[6, 6]-phenyl-C₆₁butyric acid methyl ester (P3HT/PCBM) BHJ solar cells. We find that, when the volume fraction of PCBM is in the region 0.4 ∼ 0.5, P3HT/PCBM will show bi-continuous morphology and optimum performance, consistent with experimental results. Further, the optimum temperature (413 K) for the morphology and performance of P3HT/PCBM is in accord with annealing results. We find that solvent additive plays a critical role in the desolvation process of P3HT/PCBM BHJ solar cell. Our approach provides a direct method to predict dynamic 3D morphology and performance indicator for BHJ solar cells.

Peculiarity of Two Thermodynamically-Stable Morphologies and Their Impact on the Efficiency of Small Molecule Bulk Heterojunction Solar Cells

Structural characteristics of the active layers in organic photovoltaic (OPV) devices play a critical role in charge generation, separation and transport. Here we report on morphology and structural control of p-DTS(FBTTh₂)₂:PC₇₁BM films by means of thermal annealing and 1,8-diiodooctane (DIO) solvent additive processing, and correlate it to the device performance. By combining surface imaging with nanoscale depth-sensitive neutron reflectometry (NR) and X-ray diffraction, three-dimensional morphologies of the films are reconstituted with information extending length scales from nanometers to microns. DIO promotes the formation of a well-mixed donor-acceptor vertical phase morphology with a large population of small p-DTS(FBTTh₂)₂ nanocrystals arranged in an elongated domain network of the film, thereby enhancing the device performance. In contrast, films without DIO exhibit three-sublayer vertical phase morphology with phase separation in agglomerated domains. Our findings are supported by thermodynamic description based on the Flory-Huggins theory with quantitative evaluation of pairwise interaction parameters that explain the morphological changes resulting from thermal and solvent treatments. Our study reveals that vertical phase morphology of small-molecule based OPVs is significantly different from polymer-based systems. The significant enhancement of morphology and information obtained from theoretical modeling may aid in developing an optimized morphology to enhance device performance for OPVs.

Conjugated Polymer-Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells

Ternary organic solar cells are promising candidates for bulk heterojunction solar cells; however, improving the power conversion efficiency (PCE) is quite challenging because the ternary system is complicated on phase separation behavior. In this study, a ternary organic solar cell (OSC) with two donors, including one polymer (PTB7-Th), one small molecule (p-DTS(FBTTH2)2), and one acceptor (PC71BM), is fabricated. We propose the two donors in the ternary blend forms an alloy. A notable averaged PCE of 10.5% for ternary OSC is obtained due to the improvement of the fill factor (FF) and the short-circuit current density (J(sc)), and the open-circuit voltage (V(oc)) does not pin to the smaller V(oc) of the corresponding binary blends. A highly ordered face-on orientation of polymer molecules is obtained due to the formation of an alloy structure, which facilitates the enhancement of charge separation and transport and the reduction of charge recombination. This work indicates that a high crystallinity and the face-on orientation of polymers could be obtained by forming alloy with two miscible donors, thus paving a way to largely enhance the PCE of OSCs by using the ternary blend strategy.

Origin of effects of additive solvent on film-morphology in solution-processed nonfullerene solar cells

In this paper, we report an efficient nonfullerene solar cell based on small molecules of p-DTS(FBTTh2)2 and bis-PDI-T. Characterization data indicate that the nature of the acceptor aggregate is a key factor that affects the photocurrent. There is a good relationship between the short-circuit current density (J(SC)) and the phase size of the acceptor-rich domains. The phase size of the acceptor-rich domains is tuned by both the additive types and additive content. As the kind of additive goes from 1-chloronaphthalene (CN) to 1,8-octanedithiol (ODT) and 1,8-diiodooctane (DIO), by this order the solubility of the acceptor in the additive is down, the phase size significantly decreases from over 400 nm down to 30 nm. Also, the acceptor's domain size decreases from 80 to 30 nm as the DIO content ([DIO]) is down from 1% to 0.15%. Following this trend, less DIO remains in the wet film as residue after the host chloroform evaporates, and thus less acceptor can be dissolved in the residue DIO. This decreasing of DIO content acts on the film-morphology similarly as the additive changes down to the one having a lower solubility. Accordingly, our results indicate that it is the dissolved amount of the organic component in the residue additive solvent of the wet film that plays a role in turning the phase size. The efficiency from this small molecule system is significantly raised from 0.02% up to 3.7% by selecting the additive type and fine-tuning the additive content.

Importance of domain purity and molecular packing in efficient solution-processed small-molecule solar cells

Connections are delineated between solar-cell performance, charge-carrier mobilities, and morphology in a highperformance molecular solar cell. The observations show that maximizing the relative phase purity and structural order while simultaneously limiting the domain size may be essential for achieving optimal solar-cell performances in solution-processed small-molecule solar cells .

Facile synthesis and photovoltaic applications of a new alkylated bismethano fullerene as electron acceptor for high open circuit voltage solar cells

In this work, a bis-adduct C₆₀ derivative was facilely synthesized using an alkyl solubilizing group. This semiconductor offers a higher LUMO level compared to PCBM, which resulted in a significantly enhanced V_oc of 0.73 V in organic solar cells.